Use RegSetKind enum for register sets everything, rather than int.
Always spell it as 'RegSetKind', without unnecessary 'enum'. Add
missing switch case. While at it, use uint32_t for regnums
consistently.
Differential Revision: https://reviews.llvm.org/D93450
Replace the wrong code in GetRegisterSetCount() with a constant return.
The original code passed register index in place of register set index,
effectively getting always true. Correcting the code to check for
register set existence is not possible as LLDB supports only eliminating
last register sets. Just return the full number for now which should
be NFC.
Differential Revision: https://reviews.llvm.org/D93396
Explicitly consider the libraries reported on the initial rendezvous
breakpoint hit added. This is necessary on FreeBSD since the dynamic
loader issues only a single 'consistent' state rendezvous breakpoint hit
for all the libraries present in DT_NEEDED. It is also helpful on Linux
where it ensures that ld-linux is considered loaded as well
as the shared system libraries reported afterwards.
Reenable memory maps on FreeBSD since this fixed the issue triggered
by them.
Differential Revision: https://reviews.llvm.org/D92187
Copy the Linux implementation of GetLoadedModuleFileSpec()
and GetFileLoadAddress() into NativeProcessFreeBSD. This does not seem
to change anything at the moment but reducing the differences between
the plugins should help us in the long term.
Differential Revision: https://reviews.llvm.org/D92314
Explicitly consider the libraries reported on the initial eTakeSnapshot
action added, through adding them to the added soentry list
in DYLDRendezvous::SaveSOEntriesFromRemote(). This is necessary
on FreeBSD since the dynamic loader issues only a single 'consistent'
state rendezvous breakpoint hit for all the libraries present
in DT_NEEDED (while Linux issues an added-consistent event pair).
Reenable memory maps on FreeBSD since this fixed the issue triggered
by them.
Differential Revision: https://reviews.llvm.org/D92187
This patch carries forward our aim to remove offset field from qRegisterInfo
packets and XML register description. I have created a new function which
returns if offset fields are dynamic meaning client can calculate offset on
its own based on register number sequence and register size. For now this
function only returns true for NativeRegisterContextLinux_arm64 but we can
test this for other architectures and make it standard later.
As a consequence we do not send offset field from lldb-server (arm64 for now)
while other stubs dont have an offset field so it wont effect them for now.
On the client side we have replaced previous offset calculation algorithm
with a new scheme, where we sort all primary registers in increasing
order of remote regnum and then calculate offset incrementally.
This committ also includes a test to verify all of above functionality
on Arm64.
Reviewed By: labath
Differential Revision: https://reviews.llvm.org/D91241
This came up while putting together our new strategy to create g/G packets
in compliance with GDB RSP protocol where register offsets are calculated in
increasing order of register numbers without any unused spacing.
RegisterInfoPOSIX_arm64::GPR size was being calculated after alignment
correction to 8 bytes which meant there was a 4 bytes unused space between
last gpr (cpsr) and first vector register V. We have put LLVM_PACKED_START
decorator on RegisterInfoPOSIX_arm64::GPR to make sure single byte
alignment is enforced. Moreover we are now doing to use arm64 user_pt_regs
struct defined in ptrace.h for accessing ptrace user registers.
Reviewed By: labath
Differential Revision: https://reviews.llvm.org/D92063
This patch ovverides GetExpeditedRegisterSet for
NativeRegisterContextLinux_arm64 to send vector granule register in
expedited register set if SVE mode is selected.
Reviewed By: labath
Differential Revision: https://reviews.llvm.org/D82855
This patch adds capability to introduce a custom expedited register set
in gdb remote. Currently we send register set 0 as expedited register set
but for the case of AArch64 SVE we intend to send additional information
about SVE registers size/offset configuration which can be calculated
from vg register. Therefore we will expedited Vg register in case of
AArch64 is in SVE mode to speedup register configuration calculations.
Reviewed By: labath
Differential Revision: https://reviews.llvm.org/D82853
Previously we used UINT16_MAX to mean no port/no specifc
port. This leads to confusion because 65535 is a valid
port number.
Instead use an optional. If you want a specific port call
LaunchGDBServer as normal, otherwise pass an empty optional
and it will be set to the port that gets chosen.
(or left empty in the case where we fail to find a port)
Reviewed By: labath
Differential Revision: https://reviews.llvm.org/D92035
Previously if you did:
$ lldb-server platform --server <...> --min-gdbserver-port 12346
--max-gdbserver-port 12347
(meaning only use port 12346 for gdbservers)
Then tried to launch two gdbservers on the same connection,
the second one would return port 65535. Which is a real port
number but it actually means lldb-server didn't find one it was
allowed to use.
send packet: $qLaunchGDBServer;<...>
read packet: $pid:1919;port:12346;#c0
<...>
send packet: $qLaunchGDBServer;<...>
read packet: $pid:1927;port:65535;#c7
This situation should be an error even if port 65535 does happen
to be available on the current machine.
To fix this make PortMap it's own class within
GDBRemoteCommunicationServerPlatform.
This almost the same as the old typedef but for
GetNextAvailablePort() returning an llvm::Expected.
This means we have to handle not finding a port,
by returning an error packet.
Also add unit tests for this new PortMap class.
Reviewed By: labath
Differential Revision: https://reviews.llvm.org/D91634
This patch fixes a minor typo in RegisterContextPOSIXProcessMonitor_arm64
constructor where memset target was wrongly specified as m_fpr instead of
m_gpr_arm64.
Add a 'can_connect' parameter to Process plugin initialization, and use
it to filter plugins to these capable of remote connections. This is
used to prevent 'process connect' from picking up a plugin that can only
be used locally, e.g. the legacy FreeBSD plugin.
Differential Revision: https://reviews.llvm.org/D91810
Restore Linux-alike regset names for AVX/MPX registers
as TestLldbGdbServer seems to depend on them. At the same time, fix
TestRegisters to be aware that they are not available on FreeBSD
and NetBSD, at least until we figure out a better way of reporting
unsupported register sets.
Differential Revision: https://reviews.llvm.org/D91923
Translate between abridged and full ftag values in order to expose
the latter in the gdb-remote protocol while the former are used by
FXSAVE/XSAVE... This matches the gdb behavior.
The Shell/Register tests now rely on the new behavior, and therefore
are run on non-Darwin systems only. The Python (API) test relies
on the legacy behavior, and is run on Darwin only.
Differential Revision: https://reviews.llvm.org/D91504
This extends the "memory region" command to
show tagged regions on AArch64 Linux when the MTE
extension is enabled.
(lldb) memory region the_page
[0x0000fffff7ff8000-0x0000fffff7ff9000) rw-
memory tagging: enabled
This is done by adding an optional "flags" field to
the qMemoryRegion packet. The only supported flag is
"mt" but this can be extended.
This "mt" flag is read from /proc/{pid}/smaps on Linux,
other platforms will leave out the "flags" field.
Where this "mt" flag is received "memory region" will
show that it is enabled. If it is not or the target
doesn't support memory tagging, the line is not shown.
(since majority of the time tagging will not be enabled)
Testing is added for the existing /proc/{pid}/maps
parsing and the new smaps parsing.
Minidump parsing has been updated where needed,
though it only uses maps not smaps.
Target specific tests can be run with QEMU and I have
added MTE flags to the existing helper scripts.
Reviewed By: labath
Differential Revision: https://reviews.llvm.org/D87442
GDBRemoteCommunicationClient::SendGetSupportedTraceType is checking whether the
response is `!response.IsNormalResponse()` and infers from that that it is an error response.
However, it could be either "unsupported" or "error". If we get an unsupported response,
the code then tries to generate an llvm::Expected from the non-error response which then asserts.
Debugserver doesn't implement `jLLDBTraceSupportedType`, so we get an unsupported response
whenever this function is called on macOS.
This fixes the TestAproposWithProcess on macOS (where the `apropos` command will query
the CommandObjectTraceStart which then sends the trace type query package).
Reviewed By: wallace, shafik
Differential Revision: https://reviews.llvm.org/D91801
Translate between abridged and full ftag values in order to expose
the latter in the gdb-remote protocol while the former are used by
FXSAVE/XSAVE... This matches the gdb behavior.
Differential Revision: https://reviews.llvm.org/D91504
The FXSAVE/XSAVE data can have two different layouts on x86_64. When
called as FXSAVE/XSAVE..., the Instruction Pointer and Address Pointer
registers are reported using a 16-bit segment identifier and a 32-bit
offset. When called as FXSAVE64/XSAVE64..., they are reported using
a complete 64-bit offsets instead.
LLDB has historically followed GDB and unconditionally used to assume
the 32-bit layout, with the slight modification of possibly
using a 32-bit segment register (i.e. extending the register into
the reserved 16 upper bits). When the underlying operating system used
FXSAVE64/XSAVE64..., the pointer was split into two halves,
with the upper half repored as the segment registers. While
reconstructing the full address was possible on the user end (and e.g.
the FPU register tests did that), it certainly was not the most
convenient option.
Introduce a two additional 'fip' and 'fdp' registers that overlap
with 'fiseg'/'fioff' and 'foseg'/'foff' respectively, and report
the complete 64-bit address.
Differential Revision: https://reviews.llvm.org/D91497
Depends on D90490.
The stop command is simple and invokes the new method Trace::StopTracingThread(thread).
On the other hand, the start command works by delegating its implementation to a CommandObject provided by the Trace plugin. This is necessary because each trace plugin needs different options for this command. There's even the chance that a Trace plugin can't support live tracing, but instead supports offline decoding and analysis, which means that "thread trace dump instructions" works but "thread trace start" doest. Because of this and a few other reasons, it's better to have each plugin provide this implementation.
Besides, I'm using the GetSupportedTraceType method introduced in D90490 to quickly infer what's the trace plug-in that works for the current process.
As an implementation note, I moved CommandObjectIterateOverThreads to its header so that I can use it from the IntelPT plugin. Besides, the actual start and stop logic for intel-pt is not part of this diff.
Reviewed By: clayborg
Differential Revision: https://reviews.llvm.org/D90729
This moves in the direction of our effort to synchronize register descriptions
between LLDB and GDB xml description. We want to able to send registers in a
way that their offset fields can be re-constructed based on register sizes
in the increasing order of register number.
In context to Arm64 SVE, FPCR and FPSR are same registers in FPU regset and
SVE regset. Previously FPSR/FPCR offset was set at the end of SVE data
because Linux ptrace data placed FPCR and FPSR at the end of SVE register set.
Considering interoperability with other stubs like QEMU and that g packets
should generate register data in increasing order of register numbers. We
have to move FPCR/FPSR offset up to its original location according to
register numbering scheme of ARM64 registers with SVE registers included.
Reviewed By: labath
Differential Revision: https://reviews.llvm.org/D90741
In our recent discussion we are aiming to make LLDB registers exchange minimum
possible information in qRegisterInfo or XMl register descriptions.
For SVE registers, Z registers are catagorized as primary registers and should
not have any infomration about any pseudo registers. All pseudo registers
should have the information on which primary register they belong to.
This patch removes invalidate_regs list from Z registers and will mitigate its
impact on SVE resize patch in a follow up update.
Reviewed By: labath
Differential Revision: https://reviews.llvm.org/D91057
Create a helper GetOffsetRegSetData() method to get pointer
to the regset data accounting for the necessary offset. Establish
the offsets in the constructor and store them in the structure. This
avoids having to add new Get*Offset() methods and combines some common
code.
Differential Revision: https://reviews.llvm.org/D91411
Eliminate the remaining swith-case code for register getters,
and migrate YMM registers to regset-oriented model. Since these
registers are recombined from XMM and YMM_Hi128 XSAVE blocks, while LLDB
gdb-server protocol transmits YMM registers whole, the offset-based
model will not work here. Nevertheless, some improvement was possible.
Replace generic 'XSaveRegSet' along with sub-sets for XSAVE components
with 'YMMRegSet' (and more regsets in the future as further components
are implemented). Create a helper GetYMMSplitReg() method that obtains
pointers to the appropriate XMM and YMM_Hi128 blocks to reduce code
duplication.
Differential Revision: https://reviews.llvm.org/D91293
Use offset-based method to access x86 debug registers. This also
involves adding a test for the correctness of these offsets, and making
GetDR() method of NativeRegisterContextWatchpoint_x86 public to avoid
duplicate code.
Differential Revision: https://reviews.llvm.org/D91268
Use offset-based method to access base x87 FPU registers, using offsets
relative to the position of 'struct FPR', as determined by the location
of first register in it (fctrl). Change m_fpr to use a fixed-size array
matching FXSAVE size (512 bytes). Add unit tests for verifying
RegisterInfo offsets and sizes against the FXSAVE layout.
Differential Revision: https://reviews.llvm.org/D91248
Read and write registers from m_gpr using offsets from RegisterInfo
rather than explicit switch-case. This eliminates a lot of redundant
code, and avoids mistakes such as type mismatches seen recently (wrt
segment registers). The same logic will be extended to other register
sets in the future.
Make m_gpr an uint8_t std::array to ease accesses. Ideally, we could
avoid including <machine/reg.h> entirely in the future and instead
get the correct GPR size from Utility/RegisterContextFreeBSD_* somehow.
While at it, modify register set logic to use an explicit enum with
llvm::Optional<>, making the code cleaner and at the same time enabling
compiler warnings for unhandled sets.
Since now we're fully relying on 'struct GPR' defined
in Utility/RegisterContextFreeBSD_* being entirely in sync with
the system structure, add unit tests to verify the field offsets
and sizes.
Differential Revision: https://reviews.llvm.org/D91216
Fix Debug Register offsets to be specified relatively to UserArea
on FreeBSD/amd64 and FreeBSD/i386, and add them to UserArea on i386.
This fixes overlapping GPRs and DRs in gdb-remote protocol, making it
impossible to correctly get and set debug registers from the LLDB
client.
Differential Revision: https://reviews.llvm.org/D91254
Depends on D89283.
The goal of this packet (jTraceGetSupportedType) is to be able to query the gdb-server for the tracing technology that can work for the current debuggeer, which can make the user experience simpler but allowing the user to simply type
thread trace start
to start tracing the current thread without even telling the debugger to use "intel-pt", for example. Similarly, `thread trace start [args...]` would accept args beloging to the working trace type.
Also, if the user typed
help thread trace start
We could directly show the help information of the trace type that is supported for the target, or mention instead that no tracing is supported, if that's the case.
I added some simple tests, besides, when I ran this on my machine with intel-pt support, I got
$ process plugin packet send "jTraceSupportedType"
packet: jTraceSupportedType
response: {"description":"Intel Processor Trace","pluginName":"intel-pt"}
On a machine without intel-pt support, I got
$ process plugin packet send "jTraceSupportedType"
packet: jTraceSupportedType
response: E00;
Reviewed By: clayborg, labath
Differential Revision: https://reviews.llvm.org/D90490
Copy the recent improvements from the FreeBSDRemote plugin, notably:
- moving event reporting setup into SetupTrace() helper
- adding more debug info into SIGTRAP handling
- handling user-generated (and unknown) SIGTRAP events
- adding missing error handling to the generic signal handler
- fixing attaching to processes
- switching watchpoint helpers to use llvm::Error
- minor style and formatting changes
This fixes a number of tests, mostly related to fixed attaching.
Differential Revision: https://reviews.llvm.org/D91167
Explicitly copy dbregs to new threads to ensure that watchpoints
are propagated properly. Fixes the test failure due to apparent kernel
race between reporting a new thread and resuming main thread execution
that makes implicit inheritance of dbregs unreliable. By copying them
explicitly, we ensure that the new thread correctly respects watchpoints
that were set after the thread was created but before it was reported.
The code is copied from the NetBSD plugin and modernized to use
llvm::Error.
Differential Revision: https://reviews.llvm.org/D91032
Fix DS/ES/FS/GS register sizes in getter/setter for FreeBSD. Apparently
only CS and SS registers are specified as 64/32-bit in LLDB, while
the others are specified as 16-bit. This fixes the failing
StandardStartupTest.TestStopReplyContainsThreadPcs lldb-server unittest.
Differential Revision: https://reviews.llvm.org/D91076
Update the SIGTRAP handler to account for the possibility of SIGTRAP
being generated by the user, i.e. not having any specific debugging
event associated with it, as well as receiving unknown SIGTRAPs. These
instances of SIGTRAP are passed to the regular signal handler.
Differential Revision: https://reviews.llvm.org/D91007
Fix DS/ES/FS/GS register sizes in getter/setter for NetBSD. Apparently
only CS and SS registers are specified as 64/32-bit in LLDB, while
the others are specified as 16-bit.
Differential Revision: https://reviews.llvm.org/D91090
Remove the thread name caching code. It does not handle the possibility
of thread name changing between requests, therefore breaking
TestGdbRemoteThreadName. While technically we could cache the results
and reset the cache on resuming process, the gain from doing that
does not seem worth the effort.
Differential Revision: https://reviews.llvm.org/D90863
The new FreeBSDRemote plugin has reached feature parity on i386
and amd64 targets. Use it by default on these architectures, while
allowing the use of the legacy plugin via FREEBSD_LEGACY_PLUGIN envvar.
Revisit the method of switching plugins. Apparently, the return value
of PlatformFreeBSD::CanDebugProcess() is what really decides whether
the legacy or the new plugin is used.
Update the test status. Reenable the tests that were previously
disabled on FreeBSD and do not cause hangs or are irrelevant to FreeBSD.
Mark all tests that fail reliably as expectedFailure. For now, tests
that are flaky (i.e. produce unstable results) are left enabled
and cause unpredictable test failures.
Differential Revision: https://reviews.llvm.org/D90757
Disable GetMemoryRegionInfo() in order to unbreak expression parsing.
For some reason, the presence of non-stub function causes LLDB to fail
to detect system libraries correctly. Through being unable to find
mmap() and allocate memory, this leads to expression parser being
broken.
The issue is non-trivial and it is going to require more time debugging.
On the other hand, the downsides of missing the function are minimal
(2 failing tests), and the benefit of working expression parser
justifies disabling it temporarily. Furthermore, the old FreeBSD plugin
did not implement it anyway, so it allows us to switch to the new plugin
without major regressions.
The really curious part is that the respective code in the NetBSD plugin
yields very similar results, yet does not seem to break the expression
parser.
Differential Revision: https://reviews.llvm.org/D90650
Remove the NetBSD-specific override of GetSharedLibraryInfoAddress(),
restoring the generic implementation from NativeProcessELF.
Differential Revision: https://reviews.llvm.org/D90620
Fix two bugs that caused attaching to a process in a pre-connected
lldb-server to fail. These are:
1. Prematurely reporting status in NativeProcessFreeBSD::Attach().
The SetState() call defaulted to notify the process, and LLGS tried
to send the stopped packet before the process instance was assigned
to it. While at it, add an assert for that in LLGS.
2. Duplicate call to ReinitializeThreads() (via SetupTrace()) that
overwrote the stopped status in threads. Now SetupTrace() is called
directly by NativeProcessFreeBSD::Attach() (not the Factory) in place
of ReinitializeThreads().
This fixes at least commands/process/attach/TestProcessAttach.py
and python_api/hello_world/TestHelloWorld.py.
Differential Revision: https://reviews.llvm.org/D90525
Implement NativeThreadFreeBSD::GetName(). This is based
on the equivalent code in the legacy FreeBSD plugin, except it is
modernized a bit to use llvm::Optional and std::vector for data storage.
Differential Revision: https://reviews.llvm.org/D90298
Michał Górny