There appears to be consensus in D80165 that this is the desired
behavior and I personally agree.
Differential revision: https://reviews.llvm.org/D80226
Before the transition to libOption it was possible to specify arguments
for the inferior without -- as long as they didn't start with a dash.
For example, the following invocations should all behave the same:
$ lldb inferior inferior-arg
$ lldb inferior -- inferior-arg
$ lldb -- inferior inferior-arg
This patch fixes that behavior, documents it and adds a test to cover
the different combinations.
Differential revision: https://reviews.llvm.org/D80165
This reverts commit 525a591f0f.
Fixed an issue with pointers to members based on typedefs. In this case,
LLVM would emit a second UDT. I fixed it by not passing the class type
to getTypeIndex when the base type is not a function type. lowerType
only uses the class type for direct function types. This suggests if we
have a PMF with a function typedef, there may be an issue, but that can
be solved separately.
> Before this patch, S_[L|G][THREAD32|DATA32] records were emitted with a simple name, not the fully qualified name (namespace + class scope).
>
> Differential Revision: https://reviews.llvm.org/D79447
This causes asserts in Chromium builds:
CodeViewDebug.cpp:2997: void llvm::CodeViewDebug::emitDebugInfoForUDTs(const std::vector<std::pair<std::string, const DIType *>> &):
Assertion `OriginalSize == UDTs.size()' failed.
I will follow up on the Phabricator issue.
Before this patch, S_[L|G][THREAD32|DATA32] records were emitted with a simple name, not the fully qualified name (namespace + class scope).
Differential Revision: https://reviews.llvm.org/D79447
This recommits f665e80c02 which was reverted in 1cbd1b8f69 for breaking
TestFoundationDisassembly.py. The fix is to use --force in the test to avoid
bailing out on large functions.
I have also doubled the large function limit to 8000 bytes (~~ 2000 insns), as
the foundation library contains a lot of large-ish functions. The intent of this
feature is to prevent accidental disassembling of enormous (multi-megabyte)
"functions", not to get in people's way.
The original commit message follows:
If we have a binary without symbol information (and without
LC_FUNCTION_STARTS, if on a mac), then we have to resort to using
heuristics to determine the function boundaries. However, these don't
always work, and so we can easily end up thinking we have functions
which are several megabytes in size. Attempting to (accidentally)
disassemble these can take a very long time spam the terminal with
thousands of lines of disassembly.
This patch works around that problem by adding a sanity check to the
disassemble command. If we are about to disassemble a function which is
larger than a certain threshold, we will refuse to disassemble such a
function unless the user explicitly specifies the number of instructions
to disassemble, uses start/stop addresses for disassembly, or passes the
(new) --force argument.
The threshold is currently fairly aggressive (4000 bytes ~~ 1000
instructions). If needed, we can increase it, or even make it
configurable.
Differential Revision: https://reviews.llvm.org/D79789
These test don't execute the binaries they build, and so they don't need
to build for the host. By hardcoding the target, we don't have do xfail
or skip them for targets which don't have the appropriate support in
clang(-cl).
Summary:
If we have a binary without symbol information (and without
LC_FUNCTION_STARTS, if on a mac), then we have to resort to using
heuristics to determine the function boundaries. However, these don't
always work, and so we can easily end up thinking we have functions
which are several megabytes in size. Attempting to (accidentally)
disassemble these can take a very long time spam the terminal with
thousands of lines of disassembly.
This patch works around that problem by adding a sanity check to the
disassemble command. If we are about to disassemble a function which is
larger than a certain threshold, we will refuse to disassemble such a
function unless the user explicitly specifies the number of instructions
to disassemble, uses start/stop addresses for disassembly, or passes the
(new) --force argument.
The threshold is currently fairly aggressive (4000 bytes ~~ 1000
instructions). If needed, we can increase it, or even make it
configurable.
Differential Revision: https://reviews.llvm.org/D79789
Summary:
The D programming language has 'char', 'wchar', and 'dchar' as base types,
which are defined as UTF-8, UTF-16, and UTF-32, respectively.
It also has type constructors (e.g. 'const' and 'immutable'),
that leads to D compilers emitting DW_TAG_base_type with DW_ATE_UTF
and name 'char', 'immutable(wchar)', 'const(char)', etc...
Before this patch, DW_ATE_UTF would only recognize types that
followed the C/C++ naming, and emit an error message for the rest, e.g.:
```
error: need to add support for DW_TAG_base_type 'immutable(char)'
encoded with DW_ATE = 0x10, bit_size = 8
```
The code was changed to check the byte size first,
then fall back to the old name-based check.
Reviewers: clayborg, labath
Reviewed By: labath
Subscribers: labath, lldb-commits
Tags: #lldb
Differential Revision: https://reviews.llvm.org/D79559
This patch marks following tests as xfail for arm-linux target.
lldb/test/API/functionalities/load_using_paths/TestLoadUsingPaths.py
lldb/test/API/python_api/thread/TestThreadAPI.py
lldb/test/Shell/Recognizer/assert.test
Bugs have been filed for all of them for the corresponding failing
component.
This patch fixes minidebuginfo-set-and-hit-breakpoint.test for arm-linux
targets. 32-bit elf executables use .rel.dyn and 64-bit uses .rela.dyn for
relocation entries for dynamic symbols.
While debugging why TestProcessList.py failed during passive replay, I
remembered that we don't serialize the arguments for ProcessInfo. This
is necessary to make the test pass and to make platform process list -v
behave the same during capture and replay.
Differential revision: https://reviews.llvm.org/D79646
Following test cases need minor adjustment in order to accomodate xfail
decorator:
lldb/test/Shell/SymbolFile/NativePDB/break-by-line.cpp
lldb/test/Shell/SymbolFile/NativePDB/source-list.cpp
The relevant output FileCheck is scanning in this test is as follows:
CXXRecordDecl 0x7f96cf8239c8 <<invalid sloc>> <invalid sloc> imported in A.B <undeserialized declarations> struct definition
<<DefinitionData boilerplate>>
`-FieldDecl 0x7f96cf823b90 <<invalid sloc>> <invalid sloc> imported in A.B anon_field_b 'int'
(anonymous struct)
CXXRecordDecl 0x7f96cf823be8 <<invalid sloc>> <invalid sloc> imported in A.B struct
Before 710fa2c4ee this test was passing by
accident as it had a -DAG suffix in the checks changed by this patch,
causing FileCheck to first match the last line of the output above
(instead of the first one), and then finding the FieldDecl above.
When I removed the -DAG suffix, FileCheck actually enforced the ordering
and started failing as the FieldDecl comes before the CXXRecordDecl match
we get.
This patch fixes the CXXRecordDecl check to find the first line of the output
above which caused FileCheck to also find the FieldDecl that follows. Also
gives the FieldDecl a more unique name to make name collisions less likely.
This test was generating the following false-positive warning when being compiled:
warning: class 'SomeClass' defined without specifying a base class [-Wobjc-root-class]
The current test is checking both the anonymous structs and the template
specializations in one FileCheck run, but the anonymous struct line can
partially match the AST dump of a template specialization, causing that
FileCheck won't match that same line later against the template specialization
check and incorrectly fails on that check. This only happens when the
template specialization node somehow ends up before the anonymous struct node.
This patch just puts the checks for the anonymous structs in their own FileCheck
run to prevent them from partially matching any other record decl.
Fixes rdar://62997926
We have the option to stop running commands in batch mode when an error
occurs. When that happens we should exit the driver with a non-zero exit
code.
Differential revision: https://reviews.llvm.org/D78825
Summary:
This was originally commented out as it broke the data-formatter-stl/libcxx/
tests. However this was fixed by commit ef423a3ba5
(Add Objective-C property accessors loaded from Clang module DWARF to lookup)
which sets the HasExternalVisibleStorage flag for the template specializations.
Reviewers: aprantl
Reviewed By: aprantl
Subscribers: abidh, JDevlieghere
Differential Revision: https://reviews.llvm.org/D79168
The cause of this crash is relatively simple -- we are using a
SymbolFileDWARFDwo to parse a (skeleton) dwarf unit. This cause the
CompileUnit to be created with the wrong ID, which later triggers an
assertion in SymbolFile::SetCompileUnitAtIndex. The fix is also simple
-- ensure we use the right symbol file for parsing.
However, a fairly elaborate setup is needed trigger this bug, because
ParseCompileUnit is normally called very early on (and with the right
symbol file object) during the process of accessing a compile unit.
The only way this can be triggered is if the DWARF unit is
"accidentally" pulled into scope during expression evaluation
This can happen if the "this" object used for the context of an
expression is in a namespace, and that namespace is also present in
other compile units
The included test recreates this setup.
This patch fixes a bug when synthesizing an ObjC property from
-gmodules debug info. Because the method declaration that is injected
via the non-modular property implementation is not added to the
ObjCInterfaceDecl's lookup pointer, a second copy of the accessor
would be generated when processing the ObjCPropertyDecl. This can be
avoided by finding the existing method decl in
ClangExternalASTSourceCallbacks::FindExternalVisibleDeclsByName() and
adding it to the LookupPtr.
Differential Revision: https://reviews.llvm.org/D78333
Summary:
The code in DWARFCompileUnit::BuildAddressRangeTable tries hard to avoid
relying on DW_AT_low/high_pc for compile unit range information, and
this logic is a big cause of llvm/lldb divergence in the lowest layers
of dwarf parsing code.
The implicit assumption in that code is that this information (as opposed to
DW_AT_ranges) is unreliable. However, I have not been able to verify
that assumption. It is definitely not true for all present-day
compilers (gcc, clang, icc), and it was also not the case for the
historic compilers that I have been able to get a hold of (thanks Matt
Godbolt).
All compiler included in my research either produced correct
DW_AT_ranges or .debug_aranges entries, or they produced no DW_AT_hi/lo
pc at all. The detailed findings are:
- gcc >= 4.4: produces DW_AT_ranges and .debug_aranges
- 4.1 <= gcc < 4.4: no DW_AT_ranges, no DW_AT_high_pc, .debug_aranges
present. The upper version range here is uncertain as godbolt.org does
not have intermediate versions.
- gcc < 4.1: no versions on godbolt.org
- clang >= 3.5: produces DW_AT_ranges, and (optionally) .debug_aranges
- 3.4 <= clang < 3.5: no DW_AT_ranges, no DW_AT_high_pc, .debug_aranges
present.
- clang <= 3.3: no DW_AT_ranges, no DW_AT_high_pc, no .debug_aranges
- icc >= 16.0.1: produces DW_AT_ranges
- icc < 16.0.1: no functional versions on godbolt.org (some are present
but fail to compile)
Based on this analysis, I believe it is safe to start trusting
DW_AT_low/high_pc information in dwarf as well as remove the code for
manually reconstructing range information by traversing the DIE
structure, and just keep the line table fallback. The only compilers
where this will change behavior are pre-3.4 clangs, which are almost 7
years old now. However, the functionality should remain unchanged
because we will be able to reconstruct this information from the line
table, which seems to be needed for some line-tables-only scenarios
anyway (haven't researched this too much, but at least some compilers
seem to emit DW_AT_ranges even in these situations).
In addition, benchmarks showed that for these compilers computing the
ranges via line tables is noticably faster than doing so via the DIE
tree.
Other advantages include simplifying the code base, removing some
untested code (the only test changes are recent tests with overly
reduced synthetic dwarf), and increasing llvm convergence.
Tags: #lldb
Differential Revision: https://reviews.llvm.org/D78489
This patch threads an lldb::DescriptionLevel through the typesystem to
allow dumping the full Clang AST (level=verbose) of any lldb::Type in
addition to the human-readable source description (default
level=full). This type dumping interface is currently not exposed
through the SBAPI.
The application is to let lldb-test dump the clang AST of search
results. I need this to test lazy type completion of clang types in
subsequent patches.
Differential Revision: https://reviews.llvm.org/D78329
Originally committed as 416fa7720e
Reverted (due to buildbot failure - breaking lldb) in 7a45aeacf3.
I still can't seem to build lldb locally, but Pavel Labath has kindly
provided a potential fix to preserve the old behavior in lldb by
registering a simple recoverable error handler there that prints to the
desired stream in lldb, rather than stderr.
Types that came from a Clang module are nested in DW_TAG_module tags
in DWARF. This patch recreates the Clang module hierarchy in LLDB and
1;95;0csets the owning module information accordingly. My primary motivation
is to facilitate looking up per-module APINotes for individual
declarations, but this likely also has other applications.
This reapplies the previously reverted commit, but without support for
ClassTemplateSpecializations, which I'm going to look into separately.
rdar://problem/59634380
Differential Revision: https://reviews.llvm.org/D75488
Types that came from a Clang module are nested in DW_TAG_module tags
in DWARF. This patch recreates the Clang module hierarchy in LLDB and
sets the owning module information accordingly. My primary motivation
is to facilitate looking up per-module APINotes for individual
declarations, but this likely also has other applications.
rdar://problem/59634380
Differential Revision: https://reviews.llvm.org/D75488
The FileCollector in LLDB collects every files that's used during a
debug session when capture is enabled. This ensures that the reproducer
only contains the files necessary to reproduce. This approach is not a
good fit for the dSYM bundle, which is a directory on disk, but should
be treated as a single unit.
On macOS LLDB have automatically find the matching dSYM for a binary by
its UUID. Having a incomplete dSYM in a reproducer can break debugging
even when reproducers are disabled.
This patch adds a was to specify a directory of interest to the
reproducers. It is called from SymbolVendorMacOSX with the path of the
dSYMs used by LLDB.
Differential revision: https://reviews.llvm.org/D76672
The FileCollector in LLDB collects every files that's used during a
debug session when capture is enabled. This ensures that the reproducer
only contains the files necessary to reproduce. This approach is not a
good fit for the dSYM bundle, which is a directory on disk, but should
be treated as a single unit.
On macOS LLDB have automatically find the matching dSYM for a binary by
its UUID. Having a incomplete dSYM in a reproducer can break debugging
even when reproducers are disabled.
This patch adds a was to specify a directory of interest to the
reproducers. It is called from SymbolVendorMacOSX with the path of the
dSYMs used by LLDB.
Differential revision: https://reviews.llvm.org/D76672
In breakpad, only x86 (and mips) registers have a leading '$' in their
names. Arm architectures use plain register names.
Previously, lldb was assuming all registers have a '$'. Fix the code to
match the (unfortunately, inconsistent) reality.
The reason is to add .yaml as a valid test suffix. The test folder
contains one yaml file, which wasn't being run because of that.
Unsurprisingly the test fails, but this was not because the underlying
functionality was broken, but rather because the test was setup
incorrectly (most likely due to overly aggressive simplification of the
test data on my part).
Therefore this patch also tweaks the test inputs in order to test what
they are supposed to test, and also updates some other breakpad tests
(because they depend on the same inputs as this one) to be more
realistic -- specifically it avoids putting symbols to the first page of
the module, as that's where normally the COFF header would reside.
Files imported by the script interpreter aren't opened by LLDB so they
don't end up in the reproducer. The solution is to explicitly add them
to the FileCollector.
Differential revision: https://reviews.llvm.org/D76626
D63643 added these testfiles but some of the %t4dwo and %t5dwo builds
are the same as corresponding %t4 and %t5 builds. Fortunately the
testcases do PASS.
After just adding -gsplit-dwarf these both skeleton files:
tools/lldb/test/SymbolFile/DWARF/Output/debug-types-expressions.test.tmp4dwo
tools/lldb/test/SymbolFile/DWARF/Output/debug-types-expressions.test.tmp5dwo
were referencing to this one non-skeleton file:
tools/lldb/test/SymbolFile/DWARF/debug-types-expressions.dwo
Surprisingly it does not affect the other test debug-types-basic.test
probably because it compiles to .o and then links it. While
debug-types-expressions.test compiles directly to an executable.
So fixed that while keeping the direct executable compilation.
Differential Revision: https://reviews.llvm.org/D76316
The function consisted of a complicated set of conditions to compute the
address ranges which are to be disassembled (depending on the mode
selected by command line switches). This patch creates a separate
function for each mode, so that DoExecute is only left with the task of
figuring out how to dump the relevant ranges.
This is NFC-ish, except for one change in the error message, which is
actually an improvement.
This command had nearly identical code for the "then" and "else"
branches of the "if (m_options.num_instructions != 0)" condition.
This patch factors out the common parts of the two blocks to reduce
duplication.
While we have some tests for this command already, they are very vague.
This is not surprising -- it's hard to make strict assertions about the
assembly if your input is a c++ source file. This means that the tests
can more-or-less only detect when the command breaks completely, and not
when there is a subtle change in meaning due to e.g. a code refactor --
which is something that I am getting ready to do.
This tests in this patch create binaries with well known data (via assembler
and yaml2obj). This means that we are able to make precise assertions
about the text that lldb is supposed to print. As some of the features
of this command are only available with a real process, I use a minidump
core file to create a sufficiently realistic process object.
Summary:
If a command from a sourced file produces asynchronous output, this
output often does not make its way to the user. This happens because the
asynchronous output machinery relies on the iohandler stack to ensure
the output does not interfere with the things the iohandler is doing.
However, if this happens near the end of the command stream then by the
time the asynchronous output is produced we may already have already
started tearing down the sourcing session. Specifically, we may already
pop the relevant iohandler, leaving the stack empty.
This patch makes sure this kind of output gets printed by adding a
fallback to IOHandlerStack::PrintAsync to print the output directly if
the stack is empty. This is safe because if we have no iohandlers then
there is nothing to synchronize.
Reviewers: JDevlieghere, clayborg
Subscribers: lldb-commits
Tags: #lldb
Differential Revision: https://reviews.llvm.org/D75454
These can come out nondeterministically for two reasons:
- sorting based on ConstStringified pointer values
- different relative speeds of the indexing threads
Making these nondeterministic without incurring performance penalties is
hard, so I just make the test expect them in any order (the order is not
important in this test anyway.
These are technically text files, but the object file layer treats them
as binary, and the relevant tests verify the parsed contents byte for
byte. Git's crlf conversion can make those tests fail. Marking the files
as non-text disables that.
Highlight the color marker similar to what we do for the column marker.
The default color matches the color of the current PC marker (->) in the
default disassembly format.
Differential revision: https://reviews.llvm.org/D75070
The convention is that the dwp file name is derived from the name of the
file holding the executable code, even if the linked portion of the
debug info is elsewhere (objcopy --only-keep-debug).
Summary:
Currently the test suite runs with enabled automatically applied Clang fix-its for expressions.
This is causing that sometimes incorrect expressions in tests are still evaluated even though they
are actually incorrect. Let's disable this feature in the test suite so that we know when expressions
are wrong and leave the fix-it testing to the dedicated tests for that feature.
Also updates the `lang/cpp/operators/` test as it seems Clang needs the `struct` keywords
before C and would otherwise fail without fixits.
Reviewers: jingham, JDevlieghere, shafik
Reviewed By: JDevlieghere, shafik
Subscribers: shafik, lldb-commits
Tags: #lldb
Differential Revision: https://reviews.llvm.org/D74957
Explicit dynsym/dynstr sections were added in a6370d5 to compensate for
a yaml2obj change D74764. This test doesn't need those sections, so
instead I just delete the explicit section blocks, and also the
"DynamicSymbols" block, which triggers their implicit generation.
Summary:
When we added support for type units in dwo files, we changed the
"manual" dwarf index to index _all_ dwarf units in the dwo file instead
of just the split unit belonging to our skeleton unit. This was fine for
dwo files, as they contain only a single compile units and type units do
not have a split type unit which would point to them.
However, this does not work for dwp files because, these files do
contain multiple split compile units, and the current approach means
that each unit gets indexed multiple times (once for each split unit =>
n^2 complexity).
This patch teaches the manual dwarf index to treat dwp files specially.
Any type units in the dwp file added to the main list of compile units
and indexed with them in a single batch. Split compile units in dwp
files are still indexed as a part of their skeleton unit -- this is done
because we need the DW_AT_language attribute from the skeleton unit to
index them properly.
Handling of dwo files remains unchanged -- all units (type and skeleton)
are indexed when we reach the dwo file through the split unit.
Reviewers: clayborg, JDevlieghere, aprantl
Subscribers: arphaman, lldb-commits
Tags: #lldb
Differential Revision: https://reviews.llvm.org/D74964
D74764 (https://reviews.llvm.org/rG31f2ad9c368d47721508cbd0d120d626f9041715)
changed the behavior of the yaml2obj. Now it assigns virtual addresses
for allocatable sections.
SymbolFile/Breakpad/symtab.test started to fail after this change:
(http://lab.llvm.org:8011/builders/lldb-x86_64-debian/builds/5520/steps/test/logs/stdio)
Command Output (stderr):
--
/home/worker/lldb-x86_64-debian/lldb-x86_64-debian/llvm-project/lldb/test/Shell/SymbolFile/Breakpad/symtab.test:6:10: error: CHECK: expected string not found in input
# CHECK: Symtab, file = {{.*}}symtab.out, num_symbols = 5:
^
<stdin>:15:1: note: scanning from here
Symtab, file = /home/worker/lldb-x86_64-debian/lldb-x86_64-debian/build/tools/lldb/test/SymbolFile/Breakpad/Output/symtab.out, num_symbols = 6:
^
<stdin>:15:99: note: possible intended match here
Symtab, file = /home/worker/lldb-x86_64-debian/lldb-x86_64-debian/build/tools/lldb/test/SymbolFile/Breakpad/Output/symtab.out, num_symbols = 6:
For now I've updated the basic-elf.yaml so that now it produce the same layout as before D74764.
Breakpad/symtab.test should be updated it seems.
This change will bring lldb-vscode in line with how several other llvm
tools process command line arguments and make it easier to add future
options.
Differential revision: https://reviews.llvm.org/D74798
Summary:
Around a third of our test sources have LLVM license headers. This patch removes those headers from all test
sources and also fixes any tests that depended on the length of the license header.
The reasons for this are:
* A few tests verify line numbers and will start failing if the number of lines in the LLVM license header changes. Once I landed my patch for valid SourceLocations in debug info we will probably have even more tests that verify line numbers.
* No other LLVM project is putting license headers in its test files to my knowledge.
* They make the test sources much more verbose than they have to be. Several tests have longer license headers than the actual test source.
For the record, the following tests had their line numbers changed to pass with the removal of the license header:
lldb-api :: functionalities/breakpoint/breakpoint_by_line_and_column/TestBreakpointByLineAndColumn.py
lldb-shell :: Reproducer/TestGDBRemoteRepro.test
lldb-shell :: Reproducer/TestMultipleTargets.test
lldb-shell :: Reproducer/TestReuseDirectory.test
lldb-shell :: ExecControl/StopHook/stop-hook-threads.test
lldb-shell :: ExecControl/StopHook/stop-hook.test
lldb-api :: lang/objc/exceptions/TestObjCExceptions.py
Reviewers: #lldb, espindola, JDevlieghere
Reviewed By: #lldb, JDevlieghere
Subscribers: emaste, aprantl, arphaman, JDevlieghere, lldb-commits
Tags: #lldb
Differential Revision: https://reviews.llvm.org/D74839
The only thing needed was to account for the offset from the
debug_cu_index section when searching for the location list.
This patch also fixes a bug in the Module::ParseAllDebugSymbols
function, which meant that we would only parse the variables of the
first compile unit in the module. This function is only used from
lldb-test, so this does not fix any real issue, besides preventing me
from writing a test for this patch.
Summary:
Currently when printing data types we include implicit scopes such as inline namespaces or anonymous namespaces.
This leads to command output like this (for `std::set<X>` with X being in an anonymous namespace):
```
(lldb) print my_set
(std::__1::set<(anonymous namespace)::X, std::__1::less<(anonymous namespace)::X>, std::__1::allocator<(anonymous namespace)::X> >) $0 = size=0 {}
```
This patch removes all the implicit scopes when printing type names in TypeSystemClang::GetDisplayTypeName
so that our output now looks like this:
```
(lldb) print my_set
(std::set<X, std::less<X>, std::allocator<X> >) $0 = size=0 {}
```
As previously GetDisplayTypeName and GetTypeName had the same output we actually often used the
two as if they are the same method (they were in fact using the same implementation), so this patch also
fixes the places where we actually want the display type name and not the actual type name.
Note that this doesn't touch the `GetTypeName` class that for example the data formatters use, so this patch
is only changes the way we display types to the user. The full type name can also still be found when passing
'-R' to see the raw output of a variable in case someone is somehow interested in that.
Partly fixes rdar://problem/59292534
Reviewers: shafik, jingham
Reviewed By: shafik
Subscribers: christof, JDevlieghere, lldb-commits
Tags: #lldb
Differential Revision: https://reviews.llvm.org/D74478
Summary:
In dwp files a constant (from the debug_cu_index section) needs to be
added to each reference into the debug_str_offsets section.
I've tried to implement this to roughly match the llvm flow: I've
changed the DWARFormValue to stop resolving the indirect string
references directly -- instead, it calls into DWARFUnit, which resolves
this for it (similar to how it already resolves indirect range and
location list references). I've also done a small refactor of the string
offset base computation code in DWARFUnit in order to make it easier to
access the debug_cu_index base offset.
Reviewers: JDevlieghere, aprantl, clayborg
Subscribers: lldb-commits
Tags: #lldb
Differential Revision: https://reviews.llvm.org/D74723
Summary:
This patch removes the bitrotted SymbolFileDWARF(Dwo)Dwp classes, and
replaces them with dwp support implemented directly inside
SymbolFileDWARFDwo, in a manner mirroring the implementation in llvm.
This patch does:
- add support for the .debug_cu_index section to our DWARFContext
- adds a llvm::DWARFUnitIndex argument to the DWARFUnit constructors.
This argument is used to look up the offsets of the debug_info and
debug_abbrev contributions in the sections of the dwp file.
- makes sure the creation of the DebugInfo object as well as the initial
discovery of DWARFUnits is thread-safe, as we can now call this
concurrently when doing parallel indexing.
This patch does not:
- use the DWARFUnitIndex to search for other kinds of contributions
(debug_loc, debug_ranges, etc.). This means that units which reference
these sections will not work correctly. These will be handled by
follow-up patches, but even the present level of support is sufficient
to enable basic functionality.
- Make the llvm::DWARFContext thread-safe. Right now, it just avoids this
problem by ensuring everything is initialized ahead of time. However,
this is something we will run into more often as we try to use more of
llvm, and so I plan to start looking into our options here.
Reviewers: JDevlieghere, aprantl, clayborg
Subscribers: mgorny, mgrang, lldb-commits
Tags: #lldb
Differential Revision: https://reviews.llvm.org/D73783
SB API clients can describe the failure message in a more natural
way for their UI, this doesn't add information for them.
Differential Revision: https://reviews.llvm.org/D74585
<rdar://problem/49953304>
This reimplements commit 6b2979c123 and updates
the tests to reflect the addition of the alternate symbol attribute.
Signed-off-by: Med Ismail Bennani <medismail.bennani@gmail.com>
D73303 was failing on Fedora Linux and so it was disabled by Skip the
AssertFrameRecognizer test for Linux.
I find no easy way how to find out if it gets recognized as
`__assert_fail` or `__GI___assert_fail` as during `Process` ctor
libc.so.6 is not yet loaded by the debuggee.
DWARF symbol `__GI___assert_fail` overrides the ELF symbol `__assert_fail`.
While external debug info (=DWARF) gets disabled for testsuite (D55859)
that sure does not apply for real world usage.
Differential Revision: https://reviews.llvm.org/D74252
This reverts commit cf1046c716.
Reverted: https://reviews.llvm.org/D74252
It fixed testsuite but broke real world functionality where is not used:
settings set symbols.enable-external-lookup false
D73303 was failing on Fedora Linux and so it was disabled by Skip the
AssertFrameRecognizer test for Linux.
On Fedora 30 x86_64 I have:
$ readelf -Ws /lib64/libc.so.6 |grep '^Symbol\|.*assert_fail'
Symbol table '.dynsym' contains 2362 entries:
630: 0000000000030520 70 FUNC GLOBAL DEFAULT 14 __assert_fail@@GLIBC_2.2.5
Symbol table '.symtab' contains 22711 entries:
922: 000000000002275a 15 FUNC LOCAL DEFAULT 14 __assert_fail_base.cold
18044: 0000000000030520 70 FUNC LOCAL DEFAULT 14 __GI___assert_fail
20081: 00000000000303a0 370 FUNC LOCAL DEFAULT 14 __assert_fail_base
21766: 0000000000030520 70 FUNC GLOBAL DEFAULT 14 __assert_fail
The patch should never expect __GI___assert_fail:
.symtab can be present or not but that should not change that
__assert_fail always wins - it is always present from .dynsym and it can
never be overriden by __GI___assert_fail as __GI___assert_fail has only
local binding. Global binding is preferred since D63540.
External debug info symbols do not matter since D55859 (and DWARF should
never be embedded in system libc.so.6).
Differential Revision: https://reviews.llvm.org/D74252
This patch skips the AssertFrameRecognizer test for Linux since it appears to
fail on certain distributions (AFAIK Fedora & ArchLinux).
The failure happen because the thread don't set the current frame to
the most relevant one. So the stopped location doesn't match with what
the test is expecting.
The test will be enabled again after I'll be able to reproduce the failure
on one of those platform and fix the issue.
Signed-off-by: Med Ismail Bennani <medismail.bennani@gmail.com>
EXCLUDE_FROM_ALL means something else for add_lit_testsuite as it does
for something like add_executable. Distinguish between the two by
renaming the variable and making it an argument to add_lit_testsuite.
Differential revision: https://reviews.llvm.org/D74168
When a thread stops, this checks depending on the platform if the top frame is
an abort stack frame. If so, it looks for an assert stack frame in the upper
frames and set it as the most relavant frame when found.
To do so, the StackFrameRecognizer class holds a "Most Relevant Frame" and a
"cooked" stop reason description. When the thread is about to stop, it checks
if the current frame is recognized, and if so, it fetches the recognized frame's
attributes and applies them.
rdar://58528686
Differential Revision: https://reviews.llvm.org/D73303
Signed-off-by: Med Ismail Bennani <medismail.bennani@gmail.com>
This patch has a couple of outstanding issues. The test is not python3
compatible, and it also seems to fail with python2 (at least under some
circumstances) due to an overambitious assertion.
This reverts the patch as well as subsequent fixup attempts:
014ea93376,
f5f70d1c8f.
4697e701b8.
5c15e8e682.
3ec28da6d6.
When a thread stops, this checks depending on the platform if the top frame is
an abort stack frame. If so, it looks for an assert stack frame in the upper
frames and set it as the most relavant frame when found.
To do so, the StackFrameRecognizer class holds a "Most Relevant Frame" and a
"cooked" stop reason description. When the thread is about to stop, it checks
if the current frame is recognized, and if so, it fetches the recognized frame's
attributes and applies them.
rdar://58528686
Differential Revision: https://reviews.llvm.org/D73303
Signed-off-by: Med Ismail Bennani <medismail.bennani@gmail.com>
Value::GetValueByteSize() reports the size of a Value as the size of its
underlying CompilerType. However, a host buffer that backs a Value may
be smaller than GetValueByteSize().
This situation arises when the host is only able to partially evaluate a
Value, e.g. because the expression contains DW_OP_piece.
The cleanest fix I've found to this problem is Greg's suggestion, which
is to resize the Value if (after evaluating an expression) it's found to
be too small. I've tried several alternatives which all (in one way or
the other) tried to teach the Value/ValueObjectChild system not to read
past the end of a host buffer, but this was flaky and impractical as it
isn't easy to figure out the host buffer's size (Value::GetScalar() can
point to somewhere /inside/ a host buffer, but you need to walk up the
ValueObject hierarchy to try and find its size).
This fixes an ASan error in lldb seen when debugging a clang binary.
I've added a regression test in test/functionalities/optimized_code. The
point of that test is not specifically to check that DW_OP_piece is
handled a particular way, but rather to check that lldb doesn't crash on
an input that it used to crash on.
Testing: check-lldb, and running the added tests using a sanitized lldb
--
Thanks to Jim for pointing out that an earlier version of this patch,
which simply changed the definition of Value::GetValueByteSize(), would
interact poorly with the ValueObject machinery.
Thanks also to Pavel who suggested a neat way to test this change
(which, incidentally, caught another ASan issue still present in the
original version of this patch).
rdar://58665925
Differential Revision: https://reviews.llvm.org/D73148
The CMakeLists.txt had a typo which meant that check-lldb-repro was
capturing twice instead of capturing and then replaying. This also
uncovered a missing import in lldb-repro.py. This patch fixes both
issues.
This commit adds AVR support to lldb. With this change, it can load a
binary and do basic things like dump a line table.
Not much else has been implemented, that should be done in later
changes.
Differential Revision: https://reviews.llvm.org/D73539
When a thread stops, this checks depending on the platform if the top frame is
an abort stack frame. If so, it looks for an assert stack frame in the upper
frames and set it as the most relavant frame when found.
To do so, the StackFrameRecognizer class holds a "Most Relevant Frame" and a
"cooked" stop reason description. When the thread is about to stop, it checks
if the current frame is recognized, and if so, it fetches the recognized frame's
attributes and applies them.
rdar://58528686
Differential Revision: https://reviews.llvm.org/D73303
Signed-off-by: Med Ismail Bennani <medismail.bennani@gmail.com>
This reverts commit 1b12766883 because of
breaking the mac test suite.
I'm not certain this is the cause because of a concurrent build breakage
which masked this problem, but the failure messages are related to
symbol lookup, which makes this very likely.
Summary:
In the spirit of https://reviews.llvm.org/D70846, we only return functions with matching mangled name from Apple/DebugNamesDWARFIndex::GetFunction if eFunctionNameTypeFull is requested.
This speeds up lookup in the presence of large amount of class methods of the same name (a typical examples would be constructors of templates with many instantiations or overloaded operators).
Reviewers: labath
Reviewed By: labath
Subscribers: aprantl, arphaman, lldb-commits
Tags: #lldb
Differential Revision: https://reviews.llvm.org/D73191
Explicitly disallow using lldb instead of %lldb in the shell tests. This
is a clever trick that is used by Swift to achieve the same results.
Differential revision: https://reviews.llvm.org/D73289
We were incorrectly parsing the -C argument to breakpoint set as the
column breakpoint, even though according to the help this should be the
breakpoint command. This fixes that by renaming the option to -u, adding
it to help, and adding a test case.
Differential revision: https://reviews.llvm.org/D73284
As explained in Pavel's previous commit message: %lldb is the proper
substitution. Using "lldb" can cause us to execute the system lldb
instead of the one we are testing. This happens at least in standalone
builds.
This causes the toplevel "test-depends" target, which should only build
all the dependencies necessary for running tests, to suddenaly also run
the check-lldb-repro-capture tests.
Instead add check-lldb-repro-capture as a dependency to check-lldb-repro
with a separate explicit add_dependencies call.
This adds a new target check-lldb-repro which runs the shell tests with
the lldb-repo utility. It runs the shell tests twice, once while
capturing a reproducer and then again by replaying that reproducer.
These test are checking for diagnostics printed by the driver. During
replay we only replay the SB API calls made by the driver, so it's
expected that these messages aren't displayed.
The reproducers currently only shadow the command interpreter. It would
be possible to make it work for the Lua interpreter which uses the
IOHandlerEditline under the hood, but the Python one runs a REPL in
Python itself so there's no (straightforward) way to shadow that.
Given that we already capture any API calls, this isn't super high on my
list of priorities.
%lldb is the proper substitution. Using "lldb" can cause us to execute
the system lldb instead of the one we are testing. This happens at least
in standalone builds.
The Xcode generator does not provide the auto-generated targets where
you can append a folder name to check-lldb. Instead add two custom lit
targets to run just the shell and api tests.
This patch introduces a small new utility (lldb-repro) to transparently
capture and replay debugger sessions through the command line driver.
Its used to test the reproducers by running the test suite twice.
During the first run, it captures a reproducer for every lldb invocation
and saves it to a well-know location derived from the arguments and
current working directory. During the second run, the test suite is run
again but this time every invocation of lldb replays the previously
recorded session.
Differential revision: https://reviews.llvm.org/D72823
Summary:
Normally, on linux we retrieve the process ID from the LinuxProcStatus
stream (which is just the contents of /proc/%d/status pseudo-file).
However, this stream is not strictly required (it's a breakpad
extension), and we are encountering a fair amount of minidumps which do
not have it present. It's not clear whether this is the case with all
these minidumps, but the two known situations where this stream can be
missing are:
- /proc filesystem not mounted (or something to that effect)
- process crashing after exhausting (almost) all file descriptors (so
the minidump writer may not be able to open the /proc file)
Since this is a corner case which will become less and less relevant
(crashpad-generated minidumps should not suffer from this problem), I
work around this problem by hardcoding the PID to 1 in these cases.
The same thing is done by the gdb plugin when talking to a stub which
does not report a process id (e.g. a hardware probe).
Reviewers: jingham, clayborg
Subscribers: markmentovai, lldb-commits
Tags: #lldb
Differential Revision: https://reviews.llvm.org/D70238
Summary:
The goal of this patch is two-fold. First, it fixes a use-after-free in
the construction of the llvm DWARFContext. This happened because the
construction code was throwing away the lldb DataExtractors it got while
reading the sections (unlike their llvm counterparts, these are also
responsible for memory ownership). In most cases this did not matter,
because the sections are just slices of the mmapped file data. But this
isn't the case for compressed elf sections, in which case the section is
decompressed into a heap buffer. A similar thing also happen with object
files which are loaded from process memory.
The second goal is to make it explicit which sections go into the llvm
DWARFContext -- any access to the sections through both DWARF parsers
carries a risk of parsing things twice, so it's better if this is a
conscious decision. Also, this avoids loading completely irrelevant
sections (e.g. .text). At present, the only section that needs to be
present in the llvm DWARFContext is the debug_line_str. Using it through
both APIs is not a problem, as there is no parsing involved.
The first goal is achieved by loading the sections through the existing
lldb DWARFContext APIs, which already do the caching. The second by
explicitly enumerating the sections we wish to load.
Reviewers: JDevlieghere, aprantl
Subscribers: lldb-commits
Tags: #lldb
Differential Revision: https://reviews.llvm.org/D72917
These tests used "clang -mllvm -accel-tables=Dwarf" as a way to
guarantee that clang will emit the debug_names table. Unfortunately,
a change it clang made that insufficient (-gpubnames is required now
too), which rendered these tests ineffective. Since lldb automatically
falls back to the manual index, the tests didn't fail and this change
went largely unnoticed.
This patch updates the tests to really use debug_names (-gdwarf-5
-gpubnames) is the combination that works now, and it adds additional
checks to ensure the section is actually emitted.
Fortunately, no regressions crept in while these tests were disabled.
Add a flag which always generates a reproducer when normally it would be
discarded. This is meant for testing purposes to capture a debugger
session without modification the session itself.
Summary:
This is the first in a series of patches to enable LLDB debugging of
WebAssembly targets.
Current versions of Clang emit (partial) DWARF debug information in WebAssembly
modules and we can leverage this debug information to give LLDB the ability to
do source-level debugging of Wasm code that runs in a WebAssembly engine.
A way to do this could be to use the remote debugging functionalities provided
by LLDB via the GDB-remote protocol. Remote debugging can indeed be useful not
only to connect a debugger to a process running on a remote machine, but also to
connect the debugger to a managed VM or script engine that runs locally,
provided that the engine implements a GDB-remote stub that offers the ability to
access the engine runtime internal state.
To make this work, the GDB-remote protocol would need to be extended with a few
Wasm-specific custom query commands, used to access aspects of the Wasm engine
state (like the Wasm memory, Wasm local and global variables, and so on).
Furthermore, the DWARF format would need to be enriched with a few Wasm-specific
extensions, here detailed: https://yurydelendik.github.io/webassembly-dwarf.
This CL introduce classes **ObjectFileWasm**, a file plugin to represent a Wasm
module loaded in a debuggee process. It knows how to parse Wasm modules and
store the Code section and the DWARF-specific sections.
Reviewers: jasonmolenda, clayborg, labath
Tags: #lldb
Differential Revision: https://reviews.llvm.org/D71575
These are the last sections not managed by the DWARFContext object. I
also introduce separate SectionType enums for dwo section variants, as
this is necessary for proper handling of single-file split dwarf.
Summary:
This change is connected with
https://reviews.llvm.org/D69843
In large codebases, we sometimes see Module::FindFunctions (when called from
ClangExpressionDeclMap::FindExternalVisibleDecls) returning huge amounts of
functions.
In current fix I trying to return only function_fullnames from ManualDWARFIndex::GetFunctions when eFunctionNameTypeFull is passed as argument.
Reviewers: labath, jarin, aprantl
Reviewed By: labath
Subscribers: shafik, clayborg, teemperor, arphaman, lldb-commits
Tags: #lldb
Differential Revision: https://reviews.llvm.org/D70846
This fixes a failing testcase on Fedora 30 x86_64 (regression Fedora 29->30):
PASS:
./bin/lldb ./lldb-test-build.noindex/functionalities/unwind/noreturn/TestNoreturnUnwind.test_dwarf/a.out -o 'settings set symbols.enable-external-lookup false' -o r -o bt -o quit
* frame #0: 0x00007ffff7aa6e75 libc.so.6`__GI_raise + 325
frame #1: 0x00007ffff7a91895 libc.so.6`__GI_abort + 295
frame #2: 0x0000000000401140 a.out`func_c at main.c:12:2
frame #3: 0x000000000040113a a.out`func_b at main.c:18:2
frame #4: 0x0000000000401134 a.out`func_a at main.c:26:2
frame #5: 0x000000000040112e a.out`main(argc=<unavailable>, argv=<unavailable>) at main.c:32:2
frame #6: 0x00007ffff7a92f33 libc.so.6`__libc_start_main + 243
frame #7: 0x000000000040106e a.out`_start + 46
vs.
FAIL - unrecognized abort() function:
./bin/lldb ./lldb-test-build.noindex/functionalities/unwind/noreturn/TestNoreturnUnwind.test_dwarf/a.out -o 'settings set symbols.enable-external-lookup false' -o r -o bt -o quit
* frame #0: 0x00007ffff7aa6e75 libc.so.6`.annobin_raise.c + 325
frame #1: 0x00007ffff7a91895 libc.so.6`.annobin_loadmsgcat.c_end.unlikely + 295
frame #2: 0x0000000000401140 a.out`func_c at main.c:12:2
frame #3: 0x000000000040113a a.out`func_b at main.c:18:2
frame #4: 0x0000000000401134 a.out`func_a at main.c:26:2
frame #5: 0x000000000040112e a.out`main(argc=<unavailable>, argv=<unavailable>) at main.c:32:2
frame #6: 0x00007ffff7a92f33 libc.so.6`.annobin_libc_start.c + 243
frame #7: 0x000000000040106e a.out`.annobin_init.c.hot + 46
The extra ELF symbols are there due to Annobin (I did not investigate why this
problem happened specifically since F-30 and not since F-28).
It is due to:
Symbol table '.dynsym' contains 2361 entries:
Valu e Size Type Bind Vis Name
0000000000022769 5 FUNC LOCAL DEFAULT _nl_load_domain.cold
000000000002276e 0 NOTYPE LOCAL HIDDEN .annobin_abort.c.unlikely
...
000000000002276e 0 NOTYPE LOCAL HIDDEN .annobin_loadmsgcat.c_end.unlikely
...
000000000002276e 0 NOTYPE LOCAL HIDDEN .annobin_textdomain.c_end.unlikely
000000000002276e 548 FUNC GLOBAL DEFAULT abort
000000000002276e 548 FUNC GLOBAL DEFAULT abort@@GLIBC_2.2.5
000000000002276e 548 FUNC LOCAL DEFAULT __GI_abort
0000000000022992 0 NOTYPE LOCAL HIDDEN .annobin_abort.c_end.unlikely
GDB has some more complicated preferences between overlapping and/or sharing
address symbols, I have made here so far the most simple fix for this case.
Differential revision: https://reviews.llvm.org/D63540
lld in 2bfee35 started emitting relocations for some intra-section jumps
between global symbols. This shifted the code around a bit, invalidating
text expectations.
Change the symbols to local to keep the previous behavior.
The Python script interpreter makes the current debugger, target,
process, thread and frame available to interactive scripting sessions
through convenience variables. This patch does the same for Lua.
Differential revision: https://reviews.llvm.org/D71801
Summary:
Our code was expecting that a single (symbol) file contains only one
kind of location lists. This is not correct (on non-apple platforms, at
least) as a file can compile units with different dwarf versions.
This patch moves the deteremination of location list flavour down to the
compile unit level, fixing this problem. I have also tried to rougly
align the code with the llvm DWARFUnit. Fully matching the API is not
possible because of how lldb's DWARFExpression lives separately from the
rest of the DWARF code, but this is at least a step in the right
direction.
Reviewers: JDevlieghere, aprantl, clayborg
Subscribers: dblaikie, lldb-commits
Tags: #lldb
Differential Revision: https://reviews.llvm.org/D71751
In TestConvenienceVariables I changed %t from a file to a directory.
This tripped up mkdir which can't deal with an existing file at the
given location. In order to solve this issue on the bots I added an
`rm -rf %t` statement, but now the Windows bot complains that "This
function is not supported on this system".
If you never ran the test suite wit this temporary workaround, the test
might fail. If this happens please remove what %t expands to in the lit
output and rerun the test.
This test was passing even when the output of lldb.target was empty.
I've made the test more strict by checking explicitly for the target
name and by using CHECK-NEXT lines.
The test was being skipped on the Windwos bot because it requires Python
which was silently disabled because of a configuration issue. Now that
the test runs, this fails as expected.
This bit of code is trying to strip everything up to the first colon
from all debug info paths, as dwarf2 recommends this syntax for storing
the compilation host name. However, this code was too eager, and it
ended up stripping the entire compilation directory, if it did not
contain a forward slash (or a "x:\").
Normally this does not matter, as all absolute paths will contain one of
these patterns, but this does not have to be the case in case the debug
info is produced by "clang -fdebug-compilation-dir", which can end up
producing a relative compilation directory with no slashes (this is one
of the techniques for producing "relocatable" debug info).
This ensures that breakpoint command honors the scripting language
passed with `-s`. Currently the argument ignores the actual language and
only uses it to differentiate between lldb and script commands.
Don't create a new lua state on every operation. Share a single state
across the lifetime of the script interpreter. Add simple locking to
prevent two threads from modifying the state concurrently.
D71372 introduced: `Unwind/thread-step-out-ret-addr-check.test` failing on
Fedora 30 Linux x86_64.
[lldb] Add additional validation on return address in 'thread step-out'
https://reviews.llvm.org/D71372
One problem is the underscored `_nonstandard_stub` in the `.s` file but not in
the LLDB command:
(lldb) breakpoint set -n nonstandard_stub
Breakpoint 1: no locations (pending).
WARNING: Unable to resolve breakpoint to any actual locations.
(lldb) process launch
Process 21919 exited with status = 0 (0x00000000)
Process 21919 launched: '/home/jkratoch/redhat/llvm-monorepo-clangassert/tools/lldb/test/Unwind/Output/thread-step-out-ret-addr-check.test.tmp' (x86_64)
(lldb) thread step-out
error: invalid thread
(lldb) _
Another problem is that Fedora Linux has executable stack by default and all
programs indicate non-executable stack by `PT_GNU_STACK`, after fixing the
underscore I was getting:
(lldb) thread step-out
Process 22294 exited with status = 0 (0x00000000)
(lldb) _
A different approach was tried as:
[lldb] Refactor thread-step-out-ret-addr-check test to use .data instead of stack variable
https://reviews.llvm.org/D71789
Differential revision: https://reviews.llvm.org/D71784
This implements a very elementary Lua script interpreter. It supports
running a single command as well as running interactively. It uses
editline if available. It's still missing a bunch of stuff though. Some
things that I intentionally ingored for now are that I/O isn't properly
hooked up (so every print goes to stdout) and the non-editline support
which is not handling a bunch of corner cases. The latter is a matter of
reusing existing code in the Python interpreter.
Discussion on the mailing list:
http://lists.llvm.org/pipermail/lldb-dev/2019-December/015812.html
Differential revision: https://reviews.llvm.org/D71234
Previously, if the current function had a nonstandard stack layout/ABI, and had a valid
data pointer in the location where the return address is usually located, data corruption
would occur when the breakpoint was written. This could lead to an incorrectly reported
crash or silent corruption of the program's state. Now, if the above check fails, the command safely aborts.
Differential Revision: https://reviews.llvm.org/D71372
Summary:
Fixes PR41237 - SIGSEGV on call expression evaluation when debugging clang
When linking multiple compilation units that define the same functions,
the functions is merged but their debug info is not. This ignores debug
info entries for functions in a non-executable sections; those are
functions that were definitely dropped by the linker.
Reviewers: spyffe, clayborg, jasonmolenda
Reviewed By: clayborg
Subscribers: labath, aprantl, lldb-commits
Tags: #lldb
Differential Revision: https://reviews.llvm.org/D71487
Create a new test for lldb launched without a script interpreter and
move it under a new `ScriptInterpreter` directory. Also move
crashlog.test there for consistency.
Summary:
Add `function.mangled-name` key for FormatEntity to show the mangled
function names in backtraces.
rdar://54088244
Signed-off-by: Med Ismail Bennani <medismail.bennani@gmail.com>
Subscribers: lldb-commits
Tags: #lldb
Differential Revision: https://reviews.llvm.org/D71237
Signed-off-by: Med Ismail Bennani <medismail.bennani@gmail.com>
Summary:
This enables us to display the contents of atomic structs. Calling the
removal of _Atomic "desugaring" is not fully correct as it does more
than remove sugar, but it is the right thing to do for most of the
things that we care about. We can change this back once we decide to
support atomic types more comprehensively.
Reviewers: teemperor, shafik
Subscribers: jfb, lldb-commits
Tags: #lldb
Differential Revision: https://reviews.llvm.org/D71262
Summary:
This adds support for DWARF5 location lists which are specified
indirectly, via an index into the debug_loclists offset table. This
includes parsing the DW_AT_loclists_base attribute which determines the
location of this offset table, and support for new form DW_FORM_loclistx
which is used in conjuction with DW_AT_location to refer to the location
lists in this way.
The code uses the llvm class to parse the offset information, and I've
also tried to structure it similarly to how the relevant llvm
functionality works.
Reviewers: JDevlieghere, aprantl, clayborg
Subscribers: lldb-commits
Tags: #lldb
Differential Revision: https://reviews.llvm.org/D71268
When running the test suite with always capture on, a handful of tests
are failing because they have multiple targets and therefore multiple
GDB remote connections. The current reproducer infrastructure is capable
of dealing with that.
This patch reworks the GDB remote provider to support multiple GDB
remote connections, similar to how the reproducers support shadowing
multiple command interpreter inputs. The provider now keeps a list of
packet recorders which deal with a single GDB remote connection. During
replay we rely on the order of creation to match the number of packets
to the GDB remote connection.
Differential revision: https://reviews.llvm.org/D71105
Summary:
This patch deletes the lldb location list parser and teaches the
DWARFExpression class to use the parser in llvm instead. I have
centralized all the places doing the parsing into a single
GetLocationExpression function.
In theory the the actual location list parsing should be covered by llvm
tests, and this glue code by our existing location list tests, but since
we don't have that many location list tests, I've tried to extend the
coverage a bit by adding some explicit dwarf5 loclist handling and a
test of the dumping code.
For DWARF4 location lists this should be NFC (modulo small differences
in error handling which should only show up on invalid inputs). In case
of DWARF5, this fixes various missing bits of functionality, most
notably, the lack of support for DW_LLE_offset_pair.
Reviewers: JDevlieghere, aprantl, clayborg
Subscribers: lldb-commits, dblaikie
Tags: #lldb
Differential Revision: https://reviews.llvm.org/D71003
Summary:
Lldb support base address selection entries in location lists was broken
for a long time. This wasn't noticed until llvm started producing these
kinds of entries more frequently with r374600.
In r374769, I made a quick patch which added sufficient support for them
to get the test suite to pass. However, I did not fully understand how
this code operates, and so the fix was not complete. Specifically, what
was lacking was the ability to handle modules which were not loaded at
their preferred load address (for instance, due to ASLR).
Now that I better understand how this code works, I've come to the
conclusion that the current setup does not provide enough information
to correctly process these entries. In the current setup the location
lists were parameterized by two addresses:
- the distance of the function start from the start of the compile unit.
The purpose of this was to make the location ranges relative to the
start of the function.
- the actual address where the function was loaded at. With this the
function-start-relative ranges can be translated to actual memory
locations.
The reason for the two values, instead of just one (the load bias) is (I
think) MachO, where the debug info in the object files will appear to be
relative to the address zero, but the actual code it refers to
can be moved and reordered by the linker. This means that the location
lists need to be "linked" to reflect the locations in the actual linked
file.
These two bits of information were enough to correctly process location
lists which do not contain base address selection entries (and so all
entries are relative to the CU base). However, they don't work with
them because, in theory two base address can be completely unrelated (as
can happen for instace with hot/cold function splitting, where the
linker can reorder the two pars arbitrarily).
To fix that, I split the first parameter into two:
- the compile unit base address
- the function start address, as is known in the object file
The new algorithm becomes:
- the location lists are processed as they were meant to be processed.
The CU base address is used as the initial base address value. Base
address selection entries can set a new base.
- the difference between the "file" and "load" function start addresses
is used to compute the load bias. This value is added to the final
ranges to get the actual memory location.
This algorithm is correct for non-MachO debug info, as there the
location lists correctly describe the code in the final executable, and
the dynamic linker can just move the entire module, not pieces of it. It
will also be correct for MachO if the static linker preserves relative
positions of the various parts of the location lists -- I don't know
whether it actually does that, but judging by the lack of base address
selection support in dsymutil and lldb, this isn't something that has
come up in the past.
I add a test case which simulates the ASLR scenario and demonstrates
that base address selection entries now work correctly here.
Reviewers: JDevlieghere, aprantl, clayborg
Subscribers: dblaikie, lldb-commits
Tags: #lldb
Differential Revision: https://reviews.llvm.org/D70532
Summary:
This patch adds support for atomic types (DW_TAG_atomic_type) to LLDB. It's mostly just filling out all the switch-statements that didn't implement Atomic case with the usual boilerplate.
Thanks Pavel for writing the test case.
Reviewers: labath, aprantl, shafik
Reviewed By: labath
Subscribers: jfb, abidh, JDevlieghere, lldb-commits
Tags: #lldb
Differential Revision: https://reviews.llvm.org/D71183
In DWARF5 DW_AT_low_pc (and DW_AT_entry_pc, and possibly others) can use
DW_FORM_addrx to refer to the address indirectly. This means we need to
have processed the DW_AT_addr_base attribute before we can do anything
with these.
Since we were processing the unit attributes serially, this created a
problem in cases where the DW_AT_addr_base comes after DW_AT_low_pc --
we would end up computing the wrong unit base address, which also
corrupted any values which later depended on that (for instance range
lists). Clang currently always emits DW_AT_addr_base last.
The fix is simple -- process DW_AT_addr_base first, regardless of its
position in the attribute list.
the value of DW_AT_rnglists_base of the skeleton unit is for that unit
alone (e.g. used in DW_AT_ranges of the unit DIE) and should not apply
to the split unit.
The split unit has a hardcoded range list base value -- we should
initialize range list code whenever we detect a nonempty
debug_rnglists.dwo section.
Summary:
Our rnglist support was working only for the trivial cases (one CU),
because we only ever parsed one contribution out of the debug_rnglists
section. This means we were never able to resolve range lists for the
second and subsequent units (DW_FORM_sec_offset references came out
blang, and DW_FORM_rnglistx references always used the ranges lists from
the first unit).
Since both llvm and lldb rnglist parsers are sufficiently
self-contained, and operate similarly, we can fix this problem by
switching to the llvm parser instead. Besides the changes which are due
to variations in the interface, the main thing is that now the range
list object is a member of the DWARFUnit, instead of the entire symbol
file. This ensures that each unit can get it's own private set of range
list indices, and is consistent with how llvm's DWARFUnit does it
(overall, I've tried to structure the code the same way as the llvm
version).
I've also added a test case for the two unit scenario.
Reviewers: JDevlieghere, aprantl, clayborg
Subscribers: dblaikie, lldb-commits
Tags: #lldb
Differential Revision: https://reviews.llvm.org/D71021
Summary:
Lldb's "format-independent" debug info made use of the fact that DWARF
(<=4) did not use the file index zero, and reused the support file index
zero for storing the compile unit name.
While this provided some convenience for DWARF<=4, it meant that the PDB
plugin needed to artificially remap file indices in order to free up
index 0. Furthermore, DWARF v5 make file index 0 legal, which meant that
similar remapping would be needed in the dwarf plugin too.
What this patch does instead is remove the requirement of having the
compile unit name in the index 0. It is not that useful since the name
can always be fetched from the CompileUnit object. Remapping code in the
pdb plugin(s) has been removed or simplified.
DWARF plugin has started inserting an empty FileSpec at index 0 to
ensure the indices keep matching up (in case of DWARF<=4). For DWARF5,
we insert the file 0 from the line table.
I add a test to ensure we can correctly lookup line table entries
referencing file 0, and in particular the case where the file 0 is also
duplicated in another file entry, as this is how clang produces line
tables in some circumstances (see pr44170). Though this is probably a
bug in clang, this is not forbidden by DWARF, and lldb already has
support for that in some (but not all) cases -- this adds a test for the
code path which was not fixed in this patch.
Reviewers: clayborg, JDevlieghere, jdoerfert
Subscribers: aprantl, lldb-commits
Tags: #lldb
Differential Revision: https://reviews.llvm.org/D70954
Make it possible to override reproducer capture with the
LLDB_CAPTURE_REPRODUCER environment variable.
The goal of this change is twofold.
(1) I want to be able to enable capturing reproducers during regular
test runs, both locally and on the bots. To do so I need a way to
force capture. I cannot do this through the Python API, because
reproducer capture must be enabled *before* the debugger
initialized, which happens automatically when doing `import lldb`.
(2) I want to provide an escape hatch for when reproducers are enabled
by default. Downstream we have reproducer capture enabled by default
in the driver.
This patch solves both problems by overriding the reproducer mode based
on the environment variable. Acceptable values are 0/1 and ON/OFF.
The previous fix attempt, in 62a635e864, used too much escaping
for the backslashes.
But instead of using regexes to match both path separator forms,
remove the path altogether to unify the output from the testcase
between platforms.
To ensure a reproducer works correctly, the version of LLDB used for
capture and replay must match. Right now the reproducer already contains
the LLDB version. However, this is purely informative. LLDB will happily
replay a reproducer generated with a different version of LLDB, which
can cause subtle differences.
This patch adds a version check which compares the current LLDB version
with the one in the reproducer. If the version doesn't match, LLDB will
refuse to replay. It also adds an escape hatch to make it possible to
still replay the reproducer without having to mess with the recorded
version. This might prove useful when you know two versions of LLDB
match, even though the version string doesn't. This behavior is
triggered by passing a new flag -reproducer-skip-version-check to the
lldb driver.
Differential revision: https://reviews.llvm.org/D70934
If filling in a DataExtractor from an ObjectFile, e.g. via the
ReadSectionData method, the output DataExtractor gets the address
size from the m_data member.
ObjectFile's m_data member is initialized without knowledge about
the address size (so the address size is set based on the host's
sizeof(void*), and at that point within ObjectFile's constructor,
virtual methods implemented in subclasses (like GetAddressByteSize())
can't be called, therefore fix it up when filling in external
DataExtractors.
This makes sure that line tables from executables with a different
address size are parsed properly; previously this tripped up
DWARFDebugLine::LineTable::parse for 32 bit executables on a 64 bit
host, as the address size in the line table (4) didn't match the
one set in the DWARFDataExtractor.
Differential Revision: https://reviews.llvm.org/D70848
Extend EmulateMOVRdRm to identify "mov r11, sp" in thumb mode as
setting the frame pointer, if r11 is the frame pointer register.
Differential Revision: https://reviews.llvm.org/D70797
Windows on ARM always uses thumb mode, and doesn't have most of the
mechanisms that are used in e.g. ELF for distinguishing between arm
and thumb.
Differential Revision: https://reviews.llvm.org/D70796
COFF section names can either be stored truncated to 8 chars, in the
section header, or as a longer section name, stored separately in the
string table.
libunwind locates the .eh_frame section by runtime introspection,
which only works for section names stored in the section header (as
the string table isn't mapped at runtime). To support this behaviour,
lld always truncates the section names for sections that will be
mapped, like .eh_frame.
Differential Revision: https://reviews.llvm.org/D70745
Summary:
I recently re-discovered that the unsinged stream operators of the
lldb_private::Stream class have a surprising behavior in that they print
the number in hex. This is all the more confusing because the "signed"
versions of those operators behave normally.
Now that, thanks to Raphael, each Stream class has a llvm::raw_ostream
wrapper, I think we should delete most of our formatting capabilities
and just delegate to that. This patch tests the water by just deleting
the operators with the most surprising behavior.
Most of the code using these operators was printing user_id_t values. It
wasn't fully consistent about prefixing them with "0x", but I've tried
to consistenly print it without that prefix, to make it more obviously
different from pointer values.
Reviewers: teemperor, JDevlieghere, jdoerfert
Subscribers: lldb-commits
Tags: #lldb
Differential Revision: https://reviews.llvm.org/D70241
NetBSD ptrace interface does not populate watchpoints to newly-created
threads. Solve this via copying the watchpoints from the current thread
when new thread is reported via TRAP_LWP.
Add a test that verifies that when the user does not have permissions
to set watchpoints on NetBSD, the 'watchpoint set' errors out gracefully
and thread monitoring does not crash on being unable to copy watchpoints
to new threads.
Differential Revision: https://reviews.llvm.org/D70023
This is a correctness fix for the Clang DWARF parser that primarily
matters for swift-lldb's ability to import Clang types that were
reconstructed from DWARF into Swift.
rdar://problem/55025799
Differential Revision: https://reviews.llvm.org/D70580
This patch hooks the reproducer infrastructure with the signal handlers.
When lldb crashes with reproducers capture enabled, it will now generate
the reproducer and print a short message the standard out. This doesn't
affect the pretty stack traces, which are still printed before.
This patch also introduces a new reproducer sub-command that
intentionally raises a given signal to test the reproducer signal
handling.
Currently the signal handler is doing too much work. Instead of copying
over files into the reproducers in the signal handler, we should
re-invoke ourselves with a special command line flag that looks at the
VFS mapping and performs the copy.
This is a NO-OP when reproducers are disabled.
Differential revision: https://reviews.llvm.org/D70474
For some reason the reproducer tests seem really proficient at
uncovering structural issues in LLDB related to how we tear down things,
but of course only on the bots.
The pretty stack trace helps a bit, but what I really want is the crash
reports which contain much more information, such as what other threads
we doing.
Crash reports are automatically suppressed by lit. This patch
(temporarily) disables that for the reproducer tests.
Jonas Devlieghere