Do not clone stored values unless they are GEPs that are special cased to avoid
hoisting them without hoisting their associated ld/st.
Differential revision: https://reviews.llvm.org/D22652
llvm-svn: 276358
This patch moves the update instruction for vectorized integer induction phi
nodes to the end of the latch block. This ensures consistent placement of all
induction updates across all the kinds of int inductions we create (scalar,
splat vector, or vector phi).
Differential Revision: https://reviews.llvm.org/D22416
llvm-svn: 276339
Move needsComdatForCounter() to lib/ProfileData/InstrProf.cpp from
lib/Transforms/Instrumentation/InstrProfiling.cpp to make is available for
other files.
Differential Revision: https://reviews.llvm.org/D22643
llvm-svn: 276330
Making smaller pieces out of some of these ~1000 line functions should make
it easier to incrementally upgrade them to handle vector types.
llvm-svn: 276304
The earlier change added hotness attribute to missed-optimization
remarks. This follows up with the analysis remarks (the ones explaining
the reason for the missed optimization).
llvm-svn: 276192
We can replace the return values with undef if we replaced all
the call uses with a constant/undef.
Differential Revision: https://reviews.llvm.org/D22336
llvm-svn: 276174
Summary:
Previously we wouldn't move loads/stores across instructions that had
side-effects, where that was defined as may-write or may-throw. But
this is not sufficiently restrictive: Stores can't safely be moved
across instructions that may load.
This patch also adds a DEBUG check that all instructions in our chain
are either loads or stores.
Reviewers: asbirlea
Subscribers: llvm-commits, jholewinski, arsenm, mzolotukhin
Differential Revision: https://reviews.llvm.org/D22547
llvm-svn: 276171
Summary:
Previously if we had a chain that contained a side-effecting
instruction, we wouldn't vectorize it at all. Now we'll vectorize
everything that comes before the side-effecting instruction.
Reviewers: asbirlea
Subscribers: arsenm, jholewinski, llvm-commits, mzolotukhin
Differential Revision: https://reviews.llvm.org/D22536
llvm-svn: 276170
A seemingly common use for the walker's getClobberingMemoryAccess
function is:
```
MemoryAccess *getClobber(MemorySSAWalker *W, MemoryUseOrDef *MUD) {
const Instruction *I = MUD->getMemoryInst();
return W->getClobberingMemoryAccess(I);
}
```
Which is kind of redundant, since walkers will ultimately query MSSA to
find out which MemoryAccess `I` maps to (...which is always `MUD`).
So, this patch adds an overload of getClobberingMemoryAccess that
accepts MemoryAccesses directly. As a result, the Instruction overload
of getClobberingMemoryAccess becomes a lightweight wrapper around our
new overload.
Additionally, this patch un`virtual`izes the Instruction overload of
getClobberingMemoryAccess, since there doesn't seem to be a walker that
benefits from that being virtual, and I can't think of how else one
would implement it. Happy to make it virtual again if we would benefit
from doing so.
llvm-svn: 276169
As noted in https://reviews.llvm.org/D22537 , we can use this functionality in
visitSelectInstWithICmp() and InstSimplify, but currently we have duplicated
code.
llvm-svn: 276140
Summary:
getVectorizablePrefix previously didn't work properly in the face of
aliasing loads/stores. It unwittingly assumed that the loads/stores
appeared in the BB in address order. If they didn't, it would do the
wrong thing.
Reviewers: asbirlea, tstellarAMD
Subscribers: arsenm, llvm-commits, mzolotukhin
Differential Revision: https://reviews.llvm.org/D22535
llvm-svn: 276072
Revert "[LoopSimplify] Update LCSSA after separating nested loops."
This reverts commit r275891.
Revert "[LCSSA] Post-process PHI-nodes created by SSAUpdate when constructing LCSSA form."
This reverts commit r275883.
llvm-svn: 276064
We just set PreserveLCSSA to always true since we don't have an
analogous method `mustPreserveAnalysisID(LCSSA)`.
Also port LoopInfo verifier pass to test LoopUnrollPass.
llvm-svn: 276063
Summary:
Previously, the insertion point for stores was the last instruction in
Chain *before calling getVectorizablePrefixEndIdx*. Thus if
getVectorizablePrefixEndIdx didn't return Chain.size(), we still would
insert at the last instruction in Chain.
This patch changes our internal API a bit in an attempt to make it less
prone to this sort of error. As a result, we end up recalculating the
Chain's boundary instructions, but I think worrying about the speed hit
of this is a premature optimization right now.
Reviewers: asbirlea, tstellarAMD
Subscribers: mzolotukhin, arsenm, llvm-commits
Differential Revision: https://reviews.llvm.org/D22534
llvm-svn: 276056
Summary:
The DEBUG message was hard to read because two Values were being printed
on the same line with only the delimiter "aliases". This change makes
us print each Value on its own line.
Reviewers: asbirlea
Subscribers: llvm-commits, arsenm, mzolotukhin
Differential Revision: https://reviews.llvm.org/D22533
llvm-svn: 276055
The pattern may look more obviously like a sext if written as:
define i32 @g(i16 %x) {
%zext = zext i16 %x to i32
%xor = xor i32 %zext, 32768
%add = add i32 %xor, -32768
ret i32 %add
}
We already have that fold in visitAdd().
Differential Revision: https://reviews.llvm.org/D22477
llvm-svn: 276035
r274801 did not go far enough to allow gcov+tsan to cooperate. With this
commit it's possible to run the following code without false positives:
std::thread T1(fib), T2(fib);
T1.join(); T2.join();
llvm-svn: 276015
We skipped over ReturnInsts which didn't return an argument which would
lead us to incorrectly conclude that an argument returned by another
ReturnInst was 'returned'.
This reverts commit r275756.
This fixes PR28610.
llvm-svn: 276008
Summary:
Currently, InstCombine is already able to fold expressions of the form `logic(cast(A), cast(B))` to the simpler form `cast(logic(A, B))`, where logic designates one of `and`/`or`/`xor`. This transformation is implemented in `foldCastedBitwiseLogic()` in InstCombineAndOrXor.cpp. However, this optimization will not be performed if both `A` and `B` are `icmp` instructions. The decision to preclude casts of `icmp` instructions originates in r48715 in combination with r261707, and can be best understood by the title of the former one:
> Transform (zext (or (icmp), (icmp))) to (or (zext (cimp), (zext icmp))) if at least one of the (zext icmp) can be transformed to eliminate an icmp.
Apparently, it introduced a transformation that is a reverse of the transformation that is done in `foldCastedBitwiseLogic()`. Its purpose is to expose pairs of `zext icmp` that would subsequently be optimized by `transformZExtICmp()` in InstCombineCasts.cpp. Therefore, in order to avoid an endless loop of switching back and forth between these two transformations, the one in `foldCastedBitwiseLogic()` has been restricted to exclude `icmp` instructions which is mirrored in the responsible check:
`if ((!isa<ICmpInst>(Cast0Src) || !isa<ICmpInst>(Cast1Src)) && ...`
This check seems to sort out more cases than necessary because:
- the reverse transformation is obviously done for `or` instructions only
- and also not every `zext icmp` pair is necessarily the result of this reverse transformation
Therefore we now remove this check and replace it by a more finegrained one in `shouldOptimizeCast()` that now rejects only those `logic(zext(icmp), zext(icmp))` that would be able to be optimized by `transformZExtICmp()`, which also avoids the mentioned endless loop. That means we are now able to also simplify expressions of the form `logic(cast(icmp), cast(icmp))` to `cast(logic(icmp, icmp))` (`cast` being an arbitrary `CastInst`).
As an example, consider the following IR snippet
```
%1 = icmp sgt i64 %a, %b
%2 = zext i1 %1 to i8
%3 = icmp slt i64 %a, %c
%4 = zext i1 %3 to i8
%5 = and i8 %2, %4
```
which would now be transformed to
```
%1 = icmp sgt i64 %a, %b
%2 = icmp slt i64 %a, %c
%3 = and i1 %1, %2
%4 = zext i1 %3 to i8
```
This issue became apparent when experimenting with the programming language Julia, which makes use of LLVM. Currently, Julia lowers its `Bool` datatype to LLVM's `i8` (also see https://github.com/JuliaLang/julia/pull/17225). In fact, the above IR example is the lowered form of the Julia snippet `(a > b) & (a < c)`. Like shown above, this may introduce `zext` operations, casting between `i1` and `i8`, which could for example hinder ScalarEvolution and Polly on certain code.
Reviewers: grosser, vtjnash, majnemer
Subscribers: majnemer, llvm-commits
Differential Revision: https://reviews.llvm.org/D22511
Contributed-by: Matthias Reisinger
llvm-svn: 275989
Summary:
This patch cleans up parts of InstCombine to raise its compliance with the LLVM coding standards and to increase its readability. The changes and according rationale are summarized in the following:
- Rename `ShouldOptimizeCast()` to `shouldOptimizeCast()` since functions should start with a lower case letter.
- Move `shouldOptimizeCast()` from InstCombineCasts.cpp to InstCombineAndOrXor.cpp since it's only used there.
- Simplify interface of `shouldOptimizeCast()`.
- Minor code style adaptions in `shouldOptimizeCast()`.
- Remove the documentation on the function definition of `shouldOptimizeCast()` since it just repeats the documentation on its declaration. Also enhance the documentation on its declaration with more information describing its intended use and make it doxygen-compliant.
- Change a comment in `foldCastedBitwiseLogic()` from `fold (logic (cast A), (cast B)) -> (cast (logic A, B))` to `fold logic(cast(A), cast(B)) -> cast(logic(A, B))` since the surrounding comments use this format.
- Remove comment `Only do this if the casts both really cause code to be generated.` in `foldCastedBitwiseLogic()` since it just repeats parts of the documentation of `shouldOptimizeCast()` and does not help to improve readability.
- Simplify the interface of `isEliminableCastPair()`.
- Removed the documentation on the function definition of `isEliminableCastPair()` which only contained obvious statements about its implementation. Instead added more general doxygen-compliant documentation to its declaration.
- Renamed parameter `DoXform` of `transformZExtIcmp()` to `DoTransform` to make its intention clearer.
- Moved documentation of `transformZExtIcmp()` from its definition to its declaration and made it doxygen-compliant.
Reviewers: vtjnash, grosser
Subscribers: majnemer, llvm-commits
Differential Revision: https://reviews.llvm.org/D22449
Contributed-by: Matthias Reisinger
llvm-svn: 275964
This patch updates MemorySSA's use-optimizing walker to be more
accurate and, in some cases, faster.
Essentially, this changed our core walking algorithm from a
cache-as-you-go DFS to an iteratively expanded DFS, with all of the
caching happening at the end. Said expansion happens when we hit a Phi,
P; we'll try to do the smallest amount of work possible to see if
optimizing above that Phi is legal in the first place. If so, we'll
expand the search to see if we can optimize to the next phi, etc.
An iteratively expanded DFS lets us potentially quit earlier (because we
don't assume that we can optimize above all phis) than our old walker.
Additionally, because we don't cache as we go, we can now optimize above
loops.
As an added bonus, this patch adds a ton of verification (if
EXPENSIVE_CHECKS are enabled), so finding bugs is easier.
Differential Revision: https://reviews.llvm.org/D21777
llvm-svn: 275940
For instructions in uniform set, they will not have vector versions so
add them to VecValuesToIgnore.
For induction vars, those only used in uniform instructions or consecutive
ptrs instructions have already been added to VecValuesToIgnore above. For
those induction vars which are only used in uniform instructions or
non-consecutive/non-gather scatter ptr instructions, the related phi and
update will also be added into VecValuesToIgnore set.
The change will make the vector RegUsages estimation less conservative.
Differential Revision: https://reviews.llvm.org/D20474
The recommit fixed the testcase global_alias.ll.
llvm-svn: 275936
For instructions in uniform set, they will not have vector versions so
add them to VecValuesToIgnore.
For induction vars, those only used in uniform instructions or consecutive
ptrs instructions have already been added to VecValuesToIgnore above. For
those induction vars which are only used in uniform instructions or
non-consecutive/non-gather scatter ptr instructions, the related phi and
update will also be added into VecValuesToIgnore set.
The change will make the vector RegUsages estimation less conservative.
Differential Revision: https://reviews.llvm.org/D20474
llvm-svn: 275912
Summary:
Usually LCSSA survives this transformation, but in some cases (see
attached test) it doesn't: values from the original loop after
separating might be used from the outer loop. Before the transformation
it was the same loop, so LCSSA phis were not required.
This fixes PR28272.
Reviewers: sanjoy, hfinkel, chandlerc
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D21665
llvm-svn: 275891
Summary:
The direct motivation for the port is to ensure that the OptRemarkEmitter
tests work with the new PM.
This remains a function pass because we not only create multiple loops
but could also version the original loop.
In the test I need to invoke opt
with -passes='require<aa>,loop-distribute'. LoopDistribute does not
directly depend on AA however LAA does. LAA uses getCachedResult so
I *think* we need manually pull in 'aa'.
Reviewers: davidxl, silvas
Subscribers: sanjoy, llvm-commits, mzolotukhin
Differential Revision: https://reviews.llvm.org/D22437
llvm-svn: 275811
Summary:
The main goal is to able to start using the new OptRemarkEmitter
analysis from the LoopVectorizer. Since the vectorizer was recently
converted to the new PM, it makes sense to convert this analysis as
well.
This pass is currently tested through the LoopDistribution pass, so I am
also porting LoopDistribution to get coverage for this analysis with the
new PM.
Reviewers: davidxl, silvas
Subscribers: llvm-commits, mzolotukhin
Differential Revision: https://reviews.llvm.org/D22436
llvm-svn: 275810
While debugging GVNHoist, I found it confusing that the entries in a
VNtoInsns were not always value numbers. They _usually_ were except for
StoreInst in which case they were a hash of two different value numbers.
This leads to two observations:
- It is more difficult to debug things when the semantic contents of
VNtoInsns changes over time.
- Using a single value number is not much cheaper, the value of
VNtoInsns is a SmallVector.
- It is not immediately clear what the algorithm would do if there were
hash collisions in the StoreInst case.
Using a DenseMap of std::pair sidesteps all of this.
N.B. The changes in the test were due their sensitivity to the
iteration order of VNtoInsns which has changed.
llvm-svn: 275761
This reverts also r275029, "Update Clang tests after adding inference for the returned argument attribute"
It broke LTO build. Seems miscompilation.
llvm-svn: 275756
Summary:
To enable profile-guided indirect call promotion in ThinLTO mode, we
simply add call graph edges for each profitable target from the profile
to the summaries, then the summary-guided importing will consider the
callee for importing as usual.
Also we need to enable the indirect call promotion pass creation in the
PassManagerBuilder when PerformThinLTO=true (we are in the ThinLTO
backend), so that the newly imported functions are considered for
promotion in the backends.
The IC promotion profiles refer to callees by GUID, which required
adding GUIDs to the per-module VST in bitcode (and assigning them
valueIds similar to how they are assigned valueIds in the combined
index).
Reviewers: mehdi_amini, xur
Subscribers: mehdi_amini, davidxl, llvm-commits
Differential Revision: http://reviews.llvm.org/D21932
llvm-svn: 275707
Summary:
Refactored the profitability analysis out of the IC promotion pass and
into lib/Analysis so that it can be accessed by the summary index
builder in a follow-on patch to enable IC promotion in ThinLTO (D21932).
Reviewers: davidxl, xur
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D22182
llvm-svn: 275705
This is a partial implementation of a general fold for associative+commutative operators:
(op (cast (op X, C2)), C1) --> (cast (op X, op (C1, C2)))
(op (cast (op X, C2)), C1) --> (op (cast X), op (C1, C2))
There are 7 associative operators and 13 cast types, so this could potentially go a lot further.
Differential Revision: https://reviews.llvm.org/D22421
llvm-svn: 275684
This reverts commit r275042; the initial commit triggered self-hosting failures
on ARM/AArch64. James Molloy identified the problematic backend code, which has
been disabled in r275677. Trying again...
Original commit message:
Let FuncAttrs infer the 'returned' argument attribute
A function can have one argument with the 'returned' attribute, indicating that
the associated argument is always the return value of the function. Add
FuncAttrs inference logic.
llvm-svn: 275678
Summary:
When a pass tries to keep LCSSA form it's often convenient to be able to update
LCSSA for a set of instructions rather than for the entire loop. This patch makes the
processInstruction from LCSSA externally available under a name
formLCSSAForInstruction.
Reviewers: chandlerc, sanjoy, hfinkel
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D22378
llvm-svn: 275613
This patch adds a selected set of cleanup passes including a pre-inline pass
before LLVM IR PGO instrumentation. The inline is only intended to apply those
obvious/trivial ones before instrumentation so that much less instrumentation
is needed to get better profiling information. This will drastically improve
the instrumented code performance for large C++ applications. Another benefit
is the context sensitive counts that can potentially improve the PGO
optimization.
Differential Revision: http://reviews.llvm.org/D21405
llvm-svn: 275588
Summary:
This is the first set of changes implementing the RFC from
http://thread.gmane.org/gmane.comp.compilers.llvm.devel/98334
This is a cross-sectional patch; rather than implementing the hotness
attribute for all optimization remarks and all passes in a patch set, it
implements it for the 'missed-optimization' remark for Loop
Distribution. My goal is to shake out the design issues before scaling
it up to other types and passes.
Hotness is computed as an integer as the multiplication of the block
frequency with the function entry count. It's only printed in opt
currently since clang prints the diagnostic fields directly. E.g.:
remark: /tmp/t.c:3:3: loop not distributed: use -Rpass-analysis=loop-distribute for more info (hotness: 300)
A new API added is similar to emitOptimizationRemarkMissed. The
difference is that it additionally takes a code region that the
diagnostic corresponds to. From this, hotness is computed using BFI.
The new API is exposed via an analysis pass so that it can be made
dependent on LazyBFI. (Thanks to Hal for the analysis pass idea.)
This feature can all be enabled by setDiagnosticHotnessRequested in the
LLVM context. If this is off, LazyBFI is not calculated (D22141) so
there should be no overhead.
A new command-line option is added to turn this on in opt.
My plan is to switch all user of emitOptimizationRemark* to use this
module instead.
Reviewers: hfinkel
Subscribers: rcox2, mzolotukhin, llvm-commits
Differential Revision: http://reviews.llvm.org/D21771
llvm-svn: 275583
Calling getModRefInfo with a fence resulted in crashes because fences
don't have a memory location. Add a new predicate to Instruction
called isFenceLike which indicates that the instruction mutates memory
but not any single memory location in particular. In practice, it is a
proxy for the set of instructions which "mayWriteToMemory" but cannot be
used with MemoryLocation::get.
This fixes PR28570.
llvm-svn: 275581
Summary: Convert LoopInstSimplify to new PM. Unfortunately there is no exisiting unittest for this pass.
Reviewers: davidxl, silvas
Subscribers: silvas, llvm-commits, mzolotukhin
Differential Revision: https://reviews.llvm.org/D22280
llvm-svn: 275576
Summary:
This change use the overlap interval map built from partial overwrite tracking to perform shortening MemIntrinsics.
Add test cases which was missing opportunities before.
Reviewers: hfinkel, eeckstein, mcrosier
Subscribers: mcrosier, llvm-commits
Differential Revision: https://reviews.llvm.org/D21909
llvm-svn: 275571
This patch swaps A and B in the interleaved access analysis and clarifies
related comments. The algorithm is more intuitive if we let access A precede
access B in program order rather than the reverse. This change was requested in
the review of D19984.
llvm-svn: 275567
This pass hoists duplicated computations in the program. The primary goal of
gvn-hoist is to reduce the size of functions before inline heuristics to reduce
the total cost of function inlining.
Pass written by Sebastian Pop, Aditya Kumar, Xiaoyu Hu, and Brian Rzycki.
Important algorithmic contributions by Daniel Berlin under the form of reviews.
Differential Revision: http://reviews.llvm.org/D19338
llvm-svn: 275561
Fix for PR 28418.
opt never finishes compiling a test when -gvn option is passed.
The problem is caused by the fact that GVN fails to fold a constant expression.
Differential Revision: https://reviews.llvm.org/D22185
llvm-svn: 275483
We now collect all accesses with a constant stride, not just the ones with a
stride greater than one. This change was requested in the review of D19984.
llvm-svn: 275473
This patch allows the formation of interleaved access groups in loops
containing predicated blocks. However, the predicated accesses are prevented
from forming groups.
Differential Revision: https://reviews.llvm.org/D19694
llvm-svn: 275471
Summary: Port Dead Loop Deletion Pass to the new pass manager.
Reviewers: silvas, davide
Subscribers: llvm-commits, sanjoy, mcrosier
Differential Revision: https://reviews.llvm.org/D21483
llvm-svn: 275453
This patch prevents increases in the number of instructions, pre-instcombine,
due to induction variable scalarization. An increase in instructions can lead
to an increase in the compile-time required to simplify the induction
variables. We now maintain a new map for scalarized induction variables to
prevent us from converting between the scalar and vector forms.
This patch should resolve compile-time regressions seen after r274627.
llvm-svn: 275419
enables the code size optimisation to fold a rem and div into a single
aeabi_uidivmod call. This was not happening before because sdiv was converted
but srem not, and instructions with different signedness are not combined.
Differential Revision: http://reviews.llvm.org/D22214
llvm-svn: 275403
This pass hoists duplicated computations in the program. The primary goal of
gvn-hoist is to reduce the size of functions before inline heuristics to reduce
the total cost of function inlining.
Pass written by Sebastian Pop, Aditya Kumar, Xiaoyu Hu, and Brian Rzycki.
Important algorithmic contributions by Daniel Berlin under the form of reviews.
Differential Revision: http://reviews.llvm.org/D19338
llvm-svn: 275401
constant hoisting. It not only takes into account the number of uses and the
cost of expressions in which constants appear, but now also the resulting
integer range of the offsets. Thus, the algorithm maximizes the number of uses
within an integer range that will enable more efficient code generation. On
ARM, for example, this will enable code size optimisations because less
negative offsets will be created. Negative offsets/immediates are not supported
by Thumb1 thus preventing more compact instruction encoding.
Differential Revision: http://reviews.llvm.org/D21183
llvm-svn: 275382
We were able to fold masked loads with an all-ones mask to a normal
load. However, we couldn't turn a masked load with a mask with mixed
ones and undefs into a normal load.
llvm-svn: 275380
This now should also work with the interprocedural variant of the pass.
Slightly easier now that the yak is shaved.
Differential Revision: http://reviews.llvm.org/D22329
llvm-svn: 275363
Summary:
In Scalarizer::gather we see if we already have a scattered form of Op,
and in that case use the new form.
In the particular case of PR28108, the found ValueVector SV has size 2,
where the first Value is nullptr, and the second is indeed a proper Value.
The nullptr then caused an assert to blow when we tried to do
cast<Instruction>(SV[I]).
With this patch we check SV[I] before doing the cast, and if it's nullptr
we just skip over it.
I don't know the Scalarizer well enough to know if this is the best fix
or if something should be done else where to prevent the nullptr from
being in the ValueVector at all, but at least this avoids the crash
and looking at the test case output it looks reasonable.
Reviewers: hfinkel, frasercrmck, wala, mehdi_amini
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D21518
llvm-svn: 275359
The code was pretty much copy-pasted between SCCP and IPSCCP. The situation
became clearly worse after I introduced the support for folding structs in
SCCP. This commit is NFC as we currently (still) skip the replacement
step in IPSCCP, but I'll change this soon.
llvm-svn: 275339
Summary:
LSV used to abort vectorizing a chain for interleaved load/store accesses that alias.
Allow a valid prefix of the chain to be vectorized, mark just the prefix and retry vectorizing the remaining chain.
Reviewers: llvm-commits, jlebar, arsenm
Subscribers: mzolotukhin
Differential Revision: http://reviews.llvm.org/D22119
llvm-svn: 275317
In D21740, we discussed trying to make this a more general matcher. However, I didn't see a clean
way to handle the regular m_Not cases and these non-splat vector patterns, so I've opted for the
direct approach here. If there are other potential uses of areInverseVectorBitmasks(), we could
move that helper function to a higher level.
There is an open question as to which is of these forms should be considered the canonical IR:
%sel = select <4 x i1> <i1 true, i1 false, i1 false, i1 true>, <4 x i32> %a, <4 x i32> %b
%shuf = shufflevector <4 x i32> %a, <4 x i32> %b, <4 x i32> <i32 0, i32 5, i32 6, i32 3>
Differential Revision: http://reviews.llvm.org/D22114
llvm-svn: 275289
The LCSSA pass itself will not generate several redundant PHI nodes in a single
exit block. However, such redundant PHI nodes don't violate LCSSA form, and may
be introduced by passes that preserve LCSSA, and/or preserved by the LCSSA pass
itself. So, assuming a single PHI node per exit block is not safe.
llvm-svn: 275217
Summary:
Refactored the profitability analysis out of the IC promotion pass and
into lib/Analysis so that it can be accessed by the summary index
builder in a follow-on patch to enable IC promotion in ThinLTO (D21932).
Reviewers: davidxl, xur
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D22182
llvm-svn: 275216
Summary:
It's useful to have some visibility about which call sites are devirtualized,
especially for debug purposes. Another use case is a regression test on the
application side (like, Chromium).
Reviewers: pcc
Differential Revision: http://reviews.llvm.org/D22252
llvm-svn: 275145
Summary:
Aiming to correct the ordering of loads/stores. This patch changes the
insert point for loads to the position of the first load.
It updates the ordering method for loads to insert before, rather than after.
Before this patch the following sequence:
"load a[1], store a[1], store a[0], load a[2]"
Would incorrectly vectorize to "store a[0,1], load a[1,2]".
The correctness check was assuming the insertion point for loads is at
the position of the first load, when in practice it was at the last
load. An alternative fix would have been to invert the correctness check.
The current fix changes insert position but also requires reordering of
instructions before the vectorized load.
Updated testcases to reflect the changes.
Reviewers: tstellarAMD, llvm-commits, jlebar, arsenm
Subscribers: mzolotukhin
Differential Revision: http://reviews.llvm.org/D22071
llvm-svn: 275117
There's a little bit of churn in this patch because the initialization
mechanism is now shared between the old and the new PM. Other than
that, it's just a pretty mechanical translation.
llvm-svn: 275082
In preparation for porting this pass to the new PM (which has no
doInitialization()).
Differential Revision: http://reviews.llvm.org/D22223
llvm-svn: 275074
Summary:
For sample-based PGO, using BFI to calculate callsite count is sometime not accurate. This is because with sampling based approach, if a callsite resides in a hot loop deeply nested in a bunch of cold branches, the callsite's BFI frequency would be inaccurately calculated due to lack of samples in the cold branch.
E.g.
if (A1 && A2 && A3 && ..... && A10) {
for (i=0; i < 100000000; i++) {
callsite();
}
}
Assume that A1 to A100 are all 100% taken, and callsite has 1000 samples and thus is considerred hot. Because the loop's trip count is huge, it's normal that all branches outside the loop has no sample at all. As a result, we can only use static branch probability to derive the the frequency of the loop header. Assuming that static heuristic thinks each branch is 50% taken, then the count calculated from BFI will be 1/(2^10) of the actual value.
In order to get more accurate callsite count, we directly annotate the weight on the call instruction, and directly use it when checking callsite hotness.
Note that this mechanism can also be shared by instrumentation based callsite hotness analysis. The side benefit is that it breaks the dependency from Inliner to BFI as call count is embedded in the IR.
Reviewers: davidxl, eraman, dnovillo
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D22118
llvm-svn: 275073
Summary: Handle the case when there is only one incoming/outgoing edge for a visited basic block: use the block weight to adjust edge weight even when the edge has been visited before. This can help reduce inaccuracies introduced by incorrect basic block profile, as shown in the updated unittest.
Reviewers: davidxl, dnovillo
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D22180
llvm-svn: 275072
A function can have one argument with the 'returned' attribute, indicating that
the associated argument is always the return value of the function. Add
FuncAttrs inference logic.
Differential Revision: http://reviews.llvm.org/D22202
llvm-svn: 275027
In the solver, isUndefined() does really mean "we don't know the
value yet" rather than "this is an UndefinedValue". Discussed with
Eli Friedman.
Differential Revision: http://reviews.llvm.org/D22192
llvm-svn: 275004
This code was already commented out and it made some weird assumptions,
e.g. using isUndefined() as "this value is UndefValue" instead of
"we haven't computed this value is yet". Thanks to Eli Friedman for
pointing out where I was wrong (and where this code was wrong).
llvm-svn: 274995
ConstantInt::getSExtValue may fail on >64-bit integers. Add checks to call
getSExtValue only on narrow integers.
As a minor aside, simplify slsr-gep.ll to remove unnecessary load instructions.
llvm-svn: 274982
While here move simplifyLoop() function to the new header, as
suggested by Chandler in the review.
Differential Revision: http://reviews.llvm.org/D21404
llvm-svn: 274959
Summary:
This way the metadata will be only generated when asserts enabled,
or when -enable-import-metadata specified
FIXED missing colon on requires.
Reviewers: tejohnson, eraman, mehdi_amini
Subscribers: mehdi_amini, llvm-commits
Differential Revision: http://reviews.llvm.org/D22167
llvm-svn: 274947
Summary:
This way the metadata will be only generated when asserts enabled,
or when -enable-import-metadata specified
Reviewers: tejohnson, eraman, mehdi_amini
Subscribers: mehdi_amini, llvm-commits
Differential Revision: http://reviews.llvm.org/D22167
llvm-svn: 274938
This isn't a sure thing (are 2 extra bitcasts less expensive than a logic op?),
but we'll try to err on the conservative side by going with the case that has
less IR instructions.
Note: This question came up in http://reviews.llvm.org/D22114 , but this part is
independent of that patch proposal, so I'm making this small change ahead of that
one.
See also:
http://reviews.llvm.org/rL274926
llvm-svn: 274932
Summary: As we will move to use uniformed hotness check in inliner, we do not need inline hints in SampleProfile pass any more.
Reviewers: dnovillo, davidxl
Subscribers: eraman, llvm-commits
Differential Revision: http://reviews.llvm.org/D19287
llvm-svn: 274918
This should be slightly more efficient and could avoid spurious overdefined
markings, as Eli pointed out.
Differential Revision: http://reviews.llvm.org/D22122
llvm-svn: 274905
We can fold truncs whose operand feeds from a load, if the trunc value
is available through a prior load/store.
This change is from: http://reviews.llvm.org/D21246, which folded the
trunc but missed the bitcast or ptrtoint/inttoptr required in the RAUW
call, when the load type didnt match the prior load/store type.
Differential Revision: http://reviews.llvm.org/D21791
llvm-svn: 274853
GCOVProfiler::emitProfileArcs() can create many variables with names
starting with "__llvm_gcov_ctr", so llvm appends a numeric suffix to
most of them. Teach tsan about this.
llvm-svn: 274801
We can remove dead stores in the presence of fence instructions. Fence
does not change an otherwise thread local store to visible.
reviewers: reames, dexonsmith, jfb
Differential Revision: http://reviews.llvm.org/D22001
llvm-svn: 274795
Summary:
Adds option -esan-aux-field-info to control generating binary with
auxiliary struct field information.
Extracts code for creating auxiliary information from
createCacheFragInfoGV into createCacheFragAuxGV.
Adds test struct_field_small.ll for -esan-aux-field-info test.
Reviewers: aizatsky
Subscribers: llvm-commits, bruening, eugenis, kcc, zhaoqin, vitalybuka
Differential Revision: http://reviews.llvm.org/D22019
llvm-svn: 274726
By replacing dyn_cast of ConstantInt with m_Zero/m_One/m_AllOnes, we
allow these transforms for splat vectors.
Differential Revision: http://reviews.llvm.org/D21899
llvm-svn: 274696
Follow-up from r274465: we don't need to capture the value in these cases,
so just match the constant that we're looking for. m_One/m_Zero work with
vector splats as well as scalars.
llvm-svn: 274670
Added metadata to be able to make statistics on how many functions
that have been imported have been removed. Also module name might
be helpfull when debugging.
Reviewers: tejohnson, eraman
Subscribers: mehdi_amini, llvm-commits
Differential Revision: http://reviews.llvm.org/D21943
llvm-svn: 274668
Summary:
Fixes an incorrect assert that fails on 128-bit-sized loads or stores.
Augments the wset tests to include this case.
Reviewers: aizatsky
Subscribers: vitalybuka, zhaoqin, kcc, eugenis, llvm-commits
Differential Revision: http://reviews.llvm.org/D22062
llvm-svn: 274666
The dse_with_dbg_value.ll test committed with r273141 is removed because this
we no longer performs any type of back tracking, which is what was causing the
codegen differences with and without debug information.
Differential Revision: http://reviews.llvm.org/D21613
llvm-svn: 274660
We were still crashing in the "no change" case because LVI was not
getting invalidated.
See the thread "Should analyses be able to hold AssertingVH to IR?
(related to PR28400)" for more discussion.
llvm-svn: 274656
We currently always vectorize induction variables. However, if an induction
variable is only used for counting loop iterations or computing addresses with
getelementptr instructions, we don't need to do this. Vectorizing these trivial
induction variables can create vector code that is difficult to simplify later
on. This is especially true when the unroll factor is greater than one, and we
create vector arithmetic when computing step vectors. With this patch, we check
if an induction variable is only used for counting iterations or computing
addresses, and if so, scalarize the arithmetic when computing step vectors
instead. This allows for greater simplification.
This patch addresses the suboptimal pointer arithmetic sequence seen in
PR27881.
Reference: https://llvm.org/bugs/show_bug.cgi?id=27881
Differential Revision: http://reviews.llvm.org/D21620
llvm-svn: 274627
StratifiedSets (as implemented) is very fast, but its accuracy is also
limited. If we take a more aggressive andersens-like approach, we can be
way more accurate, but we'll also end up being slower.
So, we've decided to split CFLAA into CFLSteensAA and CFLAndersAA.
Long-term, we want to end up in a place where CFLSteens is queried
first; if it can provide an answer, great (since queries are basically
map lookups). Otherwise, we'll fall back to CFLAnders, BasicAA, etc.
This patch splits everything out so we can try to do something like
that when we get a reasonable CFLAnders implementation.
Patch by Jia Chen.
Differential Revision: http://reviews.llvm.org/D21910
llvm-svn: 274589
This patch also removes the SCEV variants of getStepVector() since they have no
uses after the refactoring.
Differential Revision: http://reviews.llvm.org/D21903
llvm-svn: 274558
PR28400 seems to be not an isolated issue, but a general problem related
to caching analyses. We will need to discuss on llvm-dev.
A test case is in the PR.
llvm-svn: 274457
This actually uncovered a surprisingly large chain of ultimately unused
TLI args.
From what I can gather, this argument is a remnant of when
isKnownNonNull would look at the TLI directly.
The current approach seems to be that InferFunctionAttrs runs early in
the pipeline and uses TLI to annotate the TLI-dependent non-null
information as return attributes.
This also removes the dependence of functionattrs on TLI altogether.
llvm-svn: 274455
Fix incorrect calculation of the type size for __msan_maybe_warning_N
call that resulted in an invalid (narrowing) zext instruction and
"Assertion `castIsValid(op, S, Ty) && "Invalid cast!"' failed."
Only happens in very large functions (with more than 3500 MSan
checks) operating on integer types that are not power-of-two.
llvm-svn: 274395
Summary:
GetBoundryInstruction returns the last instruction as the instruction which follows or end(). Otherwise the last instruction in the boundry set is not being tested by isVectorizable().
Partially solve reordering of instructions. More extensive solution to follow.
Reviewers: tstellarAMD, llvm-commits, jlebar
Subscribers: escha, arsenm, mzolotukhin
Differential Revision: http://reviews.llvm.org/D21934
llvm-svn: 274389
integer.
Fixes issues on some architectures where we use arithmetic ops to build
vectors, which can cause bad things to happen for loads/stores of mixed
types.
Patch by Fiona Glaser
llvm-svn: 274307
This pass hoists duplicated computations in the program. The primary goal of
gvn-hoist is to reduce the size of functions before inline heuristics to reduce
the total cost of function inlining.
Pass written by Sebastian Pop, Aditya Kumar, Xiaoyu Hu, and Brian Rzycki.
Important algorithmic contributions by Daniel Berlin under the form of reviews.
Differential Revision: http://reviews.llvm.org/D19338
llvm-svn: 274305
Except the seed uniform instructions (conditional branch and consecutive ptr
instructions), dependencies to be added into uniform set should only be used
by existing uniform instructions or intructions outside of current loop.
Differential Revision: http://reviews.llvm.org/D21755
llvm-svn: 274262
Summary:
Found cases where DSE incorrectly add partially-overwritten intervals.
Please see the test case for details.
Reviewers: mcrosier, eeckstein, hfinkel
Subscribers: mcrosier, llvm-commits
Differential Revision: http://reviews.llvm.org/D21859
llvm-svn: 274237
For the new hotness attribute, the API will take the pass rather than
the pass name so we can no longer play the trick of AlwaysPrint being a
special pass name. This adds a getter to help the transition.
There is also a corresponding clang patch.
llvm-svn: 274100
Revert "[InstCombine] Combine A->B->A BitCast"
as this appears to cause PR27996 and as discussed in http://reviews.llvm.org/D20847
This reverts commits r270135 and r263734.
llvm-svn: 274094
If the load is conditional we can't hoist its 0-iteration instance to
the preheader because that would make it unconditional. Thus we would
access a memory location that the original loop did not access.
llvm-svn: 273991
See the bug report at https://github.com/google/sanitizers/issues/691. When a dynamic alloca has a constant size, ASan instrumentation will treat it as a regular dynamic alloca (insert calls to poison and unpoison), but the backend will turn it into a regular stack variable. The poisoning/unpoisoning is then broken. This patch will treat such allocas as static.
Differential Revision: http://reviews.llvm.org/D21509
llvm-svn: 273888
It did not handle correctly cases without GEP.
The following loop wasn't vectorized:
for (int i=0; i<len; i++)
*to++ = *from++;
I use getPtrStride() to find Stride for memory access and return 0 is the Stride is not 1 or -1.
Re-commit rL273257 - revision: http://reviews.llvm.org/D20789
llvm-svn: 273864
Summary:
This is a straightforward extension of what LoopUnswitch does to
branches to guards. That is, we unswitch
```
for (;;) {
...
guard(loop_invariant_cond);
...
}
```
into
```
if (loop_invariant_cond) {
for (;;) {
...
// There is no need to emit guard(true)
...
}
} else {
for (;;) {
...
guard(false);
// SimplifyCFG will clean this up by adding an
// unreachable after the guard(false)
...
}
}
```
Reviewers: majnemer
Subscribers: mcrosier, llvm-commits, mzolotukhin
Differential Revision: http://reviews.llvm.org/D21725
llvm-svn: 273801
SimplifyCFG had logic to insert calls to llvm.trap for two very
particular IR patterns: stores and invokes of undef/null.
While InstCombine canonicalizes certain undefined behavior IR patterns
to stores of undef, phase ordering means that this cannot be relied upon
in general.
There are much better tools than llvm.trap: UBSan and ASan.
N.B. I could be argued into reverting this change if a clear argument as
to why it is important that we synthesize llvm.trap for stores, I'd be
hard pressed to see why it'd be useful for invokes...
llvm-svn: 273778
This intrinsic safely loads a function pointer from a virtual table pointer
using type metadata. This intrinsic is used to implement control flow integrity
in conjunction with virtual call optimization. The virtual call optimization
pass will optimize away llvm.type.checked.load intrinsics associated with
devirtualized calls, thereby removing the type check in cases where it is
not needed to enforce the control flow integrity constraint.
This patch also introduces the capability to copy type metadata between
global variables, and teaches the virtual call optimization pass to do so.
Differential Revision: http://reviews.llvm.org/D21121
llvm-svn: 273756
r273711 was reverted by r273743. The inliner needs to know about any
call sites in the inlined function. These were obscured if we replaced
a call to undef with an undef but kept the call around.
This fixes PR28298.
llvm-svn: 273753
Summary: Set ProfileSummary in SampleProfilerLoader.
Reviewers: davidxl, eraman
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D21702
llvm-svn: 273745
The bitset metadata currently used in LLVM has a few problems:
1. It has the wrong name. The name "bitset" refers to an implementation
detail of one use of the metadata (i.e. its original use case, CFI).
This makes it harder to understand, as the name makes no sense in the
context of virtual call optimization.
2. It is represented using a global named metadata node, rather than
being directly associated with a global. This makes it harder to
manipulate the metadata when rebuilding global variables, summarise it
as part of ThinLTO and drop unused metadata when associated globals are
dropped. For this reason, CFI does not currently work correctly when
both CFI and vcall opt are enabled, as vcall opt needs to rebuild vtable
globals, and fails to associate metadata with the rebuilt globals. As I
understand it, the same problem could also affect ASan, which rebuilds
globals with a red zone.
This patch solves both of those problems in the following way:
1. Rename the metadata to "type metadata". This new name reflects how
the metadata is currently being used (i.e. to represent type information
for CFI and vtable opt). The new name is reflected in the name for the
associated intrinsic (llvm.type.test) and pass (LowerTypeTests).
2. Attach metadata directly to the globals that it pertains to, rather
than using the "llvm.bitsets" global metadata node as we are doing now.
This is done using the newly introduced capability to attach
metadata to global variables (r271348 and r271358).
See also: http://lists.llvm.org/pipermail/llvm-dev/2016-June/100462.html
Differential Revision: http://reviews.llvm.org/D21053
llvm-svn: 273729
This patch moves MSSA's caching walker into MemorySSA, and moves the
actual definition of MSSA's caching walker out of MemorySSA.h. This is
done in preparation for the new walker, which should be out for review
soonish.
Also, this patch removes a field from UpwardsMemoryQuery and has a few
lines of diff from clang-format'ing MemorySSA.cpp.
llvm-svn: 273723
By putting all the possible commutations together, we simplify the code.
Note that this is NFCI, but I'm adding tests that actually exercise each
commutation pattern because we don't have this anywhere else.
llvm-svn: 273702
The interleaved access analysis currently assumes that the inserted run-time
pointer aliasing checks ensure the absence of dependences that would prevent
its instruction reordering. However, this is not the case.
Issues can arise from how code generation is performed for interleaved groups.
For a load group, all loads in the group are essentially moved to the location
of the first load in program order, and for a store group, all stores in the
group are moved to the location of the last store. For groups having members
involved in a dependence relation with any other instruction in the loop, this
reordering can violate the dependence.
This patch teaches the interleaved access analysis how to avoid breaking such
dependences, and should fix PR27626.
An assumption of the original analysis was that the accesses had been collected
in "program order". The analysis was then simplified by visiting the accesses
bottom-up. However, this ordering was never guaranteed for anything other than
single basic block loops. Thus, this patch also enforces the desired ordering.
Reference: https://llvm.org/bugs/show_bug.cgi?id=27626
Differential Revision: http://reviews.llvm.org/D19984
llvm-svn: 273687
Summary:
We can avoid repeating the check `isGuaranteedToExecute` when it's already called once while checking if the alignment can be widened for the load/store being hoisted.
The function is invariant for the same instruction `UI` in `isGuaranteedToExecute(*UI, DT, CurLoop, SafetyInfo);`
Reviewers: hfinkel, eli.friedman
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D21672
llvm-svn: 273671
reduce the number of comparisons.
Specifically, InstCombine can turn:
(i == 5334 || i == 5335)
into:
((i | 1) == 5335)
SimplifyCFG was already able to detect the pattern:
(i == 5334 || i == 5335)
to:
((i & -2) == 5334)
This patch supersedes D21315 and resolves PR27555
(https://llvm.org/bugs/show_bug.cgi?id=27555).
Thanks to David and Chandler for the suggestions!
Author: Thomas Jablin (tjablin)
Reviewers: majnemer chandlerc halfdan cycheng
http://reviews.llvm.org/D21397
llvm-svn: 273639
Summary:
This instcombine rule folds away trunc operations that have value available from a prior load or store.
This kind of code can be generated as a result of GVN widening the load or from source code as well.
Reviewers: reames, majnemer, sanjoy
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D21246
llvm-svn: 273608
DeadStoreElimination can currently remove a small store rendered unnecessary by
a later larger one, but could not remove a larger store rendered unnecessary by
a series of later smaller ones. This adds that capability.
It works by keeping a map, which is used as an effective interval map, for each
store later overwritten only partially, and filling in that interval map as
more such stores are discovered. No additional walking or aliasing queries are
used. In the map forms an interval covering the the entire earlier store, then
it is dead and can be removed. The map is used as an interval map by storing a
mapping between the ending offset and the beginning offset of each interval.
I discovered this problem when investigating a performance issue with code like
this on PowerPC:
#include <complex>
using namespace std;
complex<float> bar(complex<float> C);
complex<float> foo(complex<float> C) {
return bar(C)*C;
}
which produces this:
define void @_Z4testSt7complexIfE(%"struct.std::complex"* noalias nocapture sret %agg.result, i64 %c.coerce) {
entry:
%ref.tmp = alloca i64, align 8
%tmpcast = bitcast i64* %ref.tmp to %"struct.std::complex"*
%c.sroa.0.0.extract.shift = lshr i64 %c.coerce, 32
%c.sroa.0.0.extract.trunc = trunc i64 %c.sroa.0.0.extract.shift to i32
%0 = bitcast i32 %c.sroa.0.0.extract.trunc to float
%c.sroa.2.0.extract.trunc = trunc i64 %c.coerce to i32
%1 = bitcast i32 %c.sroa.2.0.extract.trunc to float
call void @_Z3barSt7complexIfE(%"struct.std::complex"* nonnull sret %tmpcast, i64 %c.coerce)
%2 = bitcast %"struct.std::complex"* %agg.result to i64*
%3 = load i64, i64* %ref.tmp, align 8
store i64 %3, i64* %2, align 4 ; <--- ***** THIS SHOULD NOT BE HERE ****
%_M_value.realp.i.i = getelementptr inbounds %"struct.std::complex", %"struct.std::complex"* %agg.result, i64 0, i32 0, i32 0
%4 = lshr i64 %3, 32
%5 = trunc i64 %4 to i32
%6 = bitcast i32 %5 to float
%_M_value.imagp.i.i = getelementptr inbounds %"struct.std::complex", %"struct.std::complex"* %agg.result, i64 0, i32 0, i32 1
%7 = trunc i64 %3 to i32
%8 = bitcast i32 %7 to float
%mul_ad.i.i = fmul fast float %6, %1
%mul_bc.i.i = fmul fast float %8, %0
%mul_i.i.i = fadd fast float %mul_ad.i.i, %mul_bc.i.i
%mul_ac.i.i = fmul fast float %6, %0
%mul_bd.i.i = fmul fast float %8, %1
%mul_r.i.i = fsub fast float %mul_ac.i.i, %mul_bd.i.i
store float %mul_r.i.i, float* %_M_value.realp.i.i, align 4
store float %mul_i.i.i, float* %_M_value.imagp.i.i, align 4
ret void
}
the problem here is not just that the i64 store is unnecessary, but also that
it blocks further backend optimizations of the other uses of that i64 value in
the backend.
In the future, we might want to add a special case for handling smaller
accesses (e.g. using a bit vector) if the map mechanism turns out to be
noticeably inefficient. A sorted vector is also a possible replacement for the
map for small numbers of tracked intervals.
Differential Revision: http://reviews.llvm.org/D18586
llvm-svn: 273559
This is a convenience iterator that allows clients to enumerate the
GlobalObjects within a Module.
Also start using it in a few places where it is obviously the right thing
to use.
Differential Revision: http://reviews.llvm.org/D21580
llvm-svn: 273470
It's only useful to asan-itize profiling globals while debugging llvm's
profiling instrumentation passes. Enabling asan along with instrprof or
gcov instrumentation shouldn't incur extra overhead.
This patch is in the same spirit as r264805 and r273202, which disabled
tsan instrumentation of instrprof/gcov globals.
Differential Revision: http://reviews.llvm.org/D21541
llvm-svn: 273444
Do not instrument pointers with address space attributes since we cannot track
them anyway. Instrumenting them results in false positives in ASan and a
compiler crash in TSan. (The compiler should not crash in any case, but that's
a different problem.)
llvm-svn: 273339
The large offset is being tested on Windows 10 (which has larger usable
virtual address space than Windows 8 or earlier)
Patch by: Wei Wang
Differential Revision: http://reviews.llvm.org/D21523
llvm-svn: 273269
It did not handle correctly cases without GEP.
The following loop wasn't vectorized:
for (int i=0; i<len; i++)
*to++ = *from++;
I use getPtrStride() to find Stride for memory access and return 0 is the Stride is not 1 or -1.
Differential revision: http://reviews.llvm.org/D20789
llvm-svn: 273257
There is a known intended race here. This is a follow-up to r264805,
which disabled tsan instrumentation for updates to instrprof counters.
For more background on this please see the discussion in D18164.
llvm-svn: 273202
By moving this transform to InstSimplify from InstCombine, we sidestep the problem/question
raised by PR27869:
https://llvm.org/bugs/show_bug.cgi?id=27869
...where InstCombine turns an icmp+zext into a shift causing us to miss the fold.
Credit to David Majnemer for a draft patch of the changes to InstructionSimplify.cpp.
Differential Revision: http://reviews.llvm.org/D21512
llvm-svn: 273200
Summary: Inliner needs ACT when calling InlineFunction. Instead of nullptr, we need to pass it in from SampleProfileLoader
Reviewers: davidxl
Subscribers: eraman, vsk, danielcdh, llvm-commits
Differential Revision: http://reviews.llvm.org/D21205
llvm-svn: 273199
This reverts commit r273160, reapplying r273132.
RecursivelyDeleteTriviallyDeadInstructions cannot be called on a
parentless Instruction.
llvm-svn: 273162
This reverts commit r273132.
Breaks multiple test under /llvm/test:Transforms (e.g.
llvm/test:Transforms/LoopIdiom/basic.ll.test) under asan.
llvm-svn: 273160
After a store has been eliminated, when making sure that the
instruction iterator points to a valid instruction, dbg intrinsics are
now ignored as a new instruction.
Patch by Henric Karlsson.
Reviewed by Daniel Berlin.
Differential Revision: http://reviews.llvm.org/D21076
llvm-svn: 273141
Removing dead instructions requires remembering which operands have
already been removed. RecursivelyDeleteTriviallyDeadInstructions has
this logic, don't partially reimplement it in LoopIdiomRecognize.
This fixes PR28196.
llvm-svn: 273132
Change the underlying offset and comparisons to use int64_t instead of
uint64_t.
Patch by River Riddle!
Differential Revision: http://reviews.llvm.org/D21499
llvm-svn: 273105
CodeGen has hooks that allow targets to emit specialized code instead
of calls to memcmp, memchr, strcpy, stpcpy, strcmp, strlen, strnlen.
When ASan/MSan/TSan/ESan is in use, this sidesteps its interceptors, resulting
in uninstrumented memory accesses. To avoid that, make these sanitizers
mark the calls as nobuiltin.
Differential Revision: http://reviews.llvm.org/D19781
llvm-svn: 273083
This is a functional change for LLE and LDist. The other clients (LV,
LVerLICM) already had this explicitly enabled.
The temporary boolean parameter to LAA is removed that allowed turning
off speculation of symbolic strides. This makes LAA's caching interface
LAA::getInfo only take the loop as the parameter. This makes the
interface more friendly to the new Pass Manager.
The flag -enable-mem-access-versioning is moved from LV to a LAA which
now allows turning off speculation globally.
llvm-svn: 273064
This is indeed a much cleaner approach (thanks to Daniel Berlin
for pointing out), and also David/Sean for review.
Differential Revision: http://reviews.llvm.org/D21454
llvm-svn: 273032
The motivating example for this transform is similar to D20774 where bitcasts interfere
with a single cmp/select sequence, but in this case we have 2 uses of each bitcast to
produce min and max ops:
define void @minmax_bc_store(<4 x float> %a, <4 x float> %b, <4 x float>* %ptr1, <4 x float>* %ptr2) {
%cmp = fcmp olt <4 x float> %a, %b
%bc1 = bitcast <4 x float> %a to <4 x i32>
%bc2 = bitcast <4 x float> %b to <4 x i32>
%sel1 = select <4 x i1> %cmp, <4 x i32> %bc1, <4 x i32> %bc2
%sel2 = select <4 x i1> %cmp, <4 x i32> %bc2, <4 x i32> %bc1
%bc3 = bitcast <4 x float>* %ptr1 to <4 x i32>*
store <4 x i32> %sel1, <4 x i32>* %bc3
%bc4 = bitcast <4 x float>* %ptr2 to <4 x i32>*
store <4 x i32> %sel2, <4 x i32>* %bc4
ret void
}
With this patch, we move the selects up to use the input args which allows getting rid of
all of the bitcasts:
define void @minmax_bc_store(<4 x float> %a, <4 x float> %b, <4 x float>* %ptr1, <4 x float>* %ptr2) {
%cmp = fcmp olt <4 x float> %a, %b
%sel1.v = select <4 x i1> %cmp, <4 x float> %a, <4 x float> %b
%sel2.v = select <4 x i1> %cmp, <4 x float> %b, <4 x float> %a
store <4 x float> %sel1.v, <4 x float>* %ptr1, align 16
store <4 x float> %sel2.v, <4 x float>* %ptr2, align 16
ret void
}
The asm for x86 SSE then improves from:
movaps %xmm0, %xmm2
cmpltps %xmm1, %xmm2
movaps %xmm2, %xmm3
andnps %xmm1, %xmm3
movaps %xmm2, %xmm4
andnps %xmm0, %xmm4
andps %xmm2, %xmm0
orps %xmm3, %xmm0
andps %xmm1, %xmm2
orps %xmm4, %xmm2
movaps %xmm0, (%rdi)
movaps %xmm2, (%rsi)
To:
movaps %xmm0, %xmm2
minps %xmm1, %xmm2
maxps %xmm0, %xmm1
movaps %xmm2, (%rdi)
movaps %xmm1, (%rsi)
The TODO comments show that we're limiting this transform only to vectors and only to bitcasts
because we need to improve other transforms or risk creating worse codegen.
Differential Revision: http://reviews.llvm.org/D21190
llvm-svn: 273011
pass manager passes' `run` methods.
This removes a bunch of SFINAE goop from the pass manager and just
requires pass authors to accept `AnalysisManager<IRUnitT> &` as a dead
argument. This is a small price to pay for the simplicity of the system
as a whole, despite the noise that changing it causes at this stage.
This will also helpfull allow us to make the signature of the run
methods much more flexible for different kinds af passes to support
things like intelligently updating the pass's progression over IR units.
While this touches many, many, files, the changes are really boring.
Mostly made with the help of my trusty perl one liners.
Thanks to Sean and Hal for bouncing ideas for this with me in IRC.
llvm-svn: 272978
Switch from m_Constant to m_APInt per David's request. NFC.
Author: Thomas Jablin (tjablin)
Reviewers: majnemer cycheng
http://reviews.llvm.org/D21440
llvm-svn: 272977
This is still NFCI, so the list of clients that allow symbolic stride
speculation does not change (yes: LV and LoopVersioningLICM, no: LLE,
LDist). However since the symbolic strides are now managed by LAA
rather than passed by client a new bool parameter is used to enable
symbolic stride speculation.
The existing test Transforms/LoopVectorize/version-mem-access.ll checks
that stride speculation is performed for LV.
The previously added test Transforms/LoopLoadElim/symbolic-stride.ll
ensures that no speculation is performed for LLE.
The next patch will change the functionality and turn on symbolic stride
speculation in all of LAA's clients and remove the bool parameter.
llvm-svn: 272970
When moving unsafe allocas to the unsafe stack, dbg.declare intrinsics are
updated to refer to the new location.
This change does the same to dbg.value intrinsics.
llvm-svn: 272968
Turns out SymbolicStrides is actually used in canVectorizeWithIfConvert
before it gets set up in canVectorizeMemory.
This works fine as long as SymbolicStrides resides in LV since we just
have an empty map. Based on this the conclusion is made that there are
no symbolic strides which is conservatively correct.
However once SymbolicStrides becomes part of LAI, LAI is nullptr at this
point so we need to differentiate the uninitialized state by returning a
nullptr for SymbolicStrides.
llvm-svn: 272966
Redundant invariant loads can be CSE'ed with very little extra effort
over what early-cse already tracks, so it looks reasonable to make
early-cse handle this case.
llvm-svn: 272954
Daniel Berlin expressed some real concerns about the port and proposed
and alternative approach. I'll revert this for now while working on a
new patch, which I hope to put up for review shortly. Sorry for the churn.
llvm-svn: 272925
We should update results of the BranchProbabilityInfo after removing block in JumpThreading. Otherwise
we will get dangling pointer inside BranchProbabilityInfo cache.
Differential Revision: http://reviews.llvm.org/D20957
llvm-svn: 272891
Added checks to make sure the Scalarizer::transferMetadata() don't
remove valid debug locations from instructions. This is important as
the verifier pass require that e.g. inlinable callsites have a valid
debug location.
https://llvm.org/bugs/show_bug.cgi?id=27938
Patch by Karl-Johan Karlsson
Reviewers: dblaikie
Differential Revision: http://reviews.llvm.org/D20807
llvm-svn: 272884
(i == 5334 || i == 5335)
to:
((i & -2) == 5334)
This transformation has some incorrect side conditions. Specifically, the
transformation is only applied when the right-hand side constant (5334 in
the example) is a power of two not equal and not equal to the negated mask.
These side conditions were added in r258904 to fix PR26323. The correct side
condition is that: ((Constant & Mask) == Constant)[(5334 & -2) == 5334].
It's a little bit hard to see why these transformations are correct and what
the side conditions ought to be. Here is a CVC3 program to verify them for
64-bit values:
ONE : BITVECTOR(64) = BVZEROEXTEND(0bin1, 63);
x : BITVECTOR(64);
y : BITVECTOR(64);
z : BITVECTOR(64);
mask : BITVECTOR(64) = BVSHL(ONE, z);
QUERY( (y & ~mask = y) =>
((x & ~mask = y) <=> (x = y OR x = (y | mask)))
);
Please note that each pattern must be a dual implication (<--> or iff). One
directional implication can create spurious matches. If the implication is
only one-way, an unsatisfiable condition on the left side can imply a
satisfiable condition on the right side. Dual implication ensures that
satisfiable conditions are transformed to other satisfiable conditions and
unsatisfiable conditions are transformed to other unsatisfiable conditions.
Here is a concrete example of a unsatisfiable condition on the left
implying a satisfiable condition on the right:
mask = (1 << z)
(x & ~mask) == y --> (x == y || x == (y | mask))
Substituting y = 3, z = 0 yields:
(x & -2) == 3 --> (x == 3 || x == 2)
The version of this code before r258904 had no side-conditions and
incorrectly justified itself in comments through one-directional
implication.
Thanks to Chandler for the suggestion!
Author: Thomas Jablin (tjablin)
Reviewers: chandlerc majnemer hfinkel cycheng
http://reviews.llvm.org/D21417
llvm-svn: 272873
Summary: This reverts the changes to Globals.cpp and IRMover.cpp in
"[IR] Copy comdats in GlobalObject::copyAttributesFrom" (D20631,
rL270743).
The DeadArgElim test is left unchanged, and we change DAE to explicitly
copy comdats.
The reverted change breaks copyAttributesFrom when the destination lives
in a different module from the source. The decision in D21255 was to
revert this patch and handle comdat copying separately from
copyAttributesFrom.
Reviewers: majnemer, rnk
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D21403
llvm-svn: 272855
LoopVectorizationLegality holds a constant reference to LAI, so this
will have to be const as well.
Also added missed function comment.
llvm-svn: 272851
The error on clang-x86-win2008-selfhost is:
C:\buildbot\slave-config\clang-x86-win2008-selfhost\llvm\lib\Transforms\Vectorize\SLPVectorizer.cpp(955) : error C2248: 'llvm::slpvectorizer::BoUpSLP::ScheduleData' : cannot access private struct declared in class 'llvm::slpvectorizer::BoUpSLP'
C:\buildbot\slave-config\clang-x86-win2008-selfhost\llvm\lib\Transforms\Vectorize\SLPVectorizer.cpp(608) : see declaration of 'llvm::slpvectorizer::BoUpSLP::ScheduleData'
C:\buildbot\slave-config\clang-x86-win2008-selfhost\llvm\lib\Transforms\Vectorize\SLPVectorizer.cpp(337) : see declaration of 'llvm::slpvectorizer::BoUpSLP'
I reproduced this locally with both MSVC 2013 and MSVC 2015.
llvm-svn: 272772
This wasn't failing for me with clang as the compiler. I think GCC may
disagree with clang about whether a friend declaration introduces a
declaration in the enclosing namespace (or something).
Example error:
/home/uweigand/sandbox/buildbot/clang-s390x-linux/llvm/lib/Transforms/Vectorize/SLPVectorizer.cpp:950:77: error: ‘llvm::raw_ostream& llvm::slpvectorizer::operator<<(llvm::raw_ostream&, const llvm::slpvectorizer::BoUpSLP::ScheduleData&)’ should have been declared inside ‘llvm::slpvectorizer’
const BoUpSLP::ScheduleData &SD) {
^
llvm-svn: 272767
This uses the "runImpl" approach to share code with the old PM.
Porting to the new PM meant abandoning the anonymous namespace enclosing
most of SLPVectorizer.cpp which is a bit of a bummer (but not a big deal
compared to having to pull the pass class into a header which the new PM
requires since it calls the constructor directly).
llvm-svn: 272766
r272715 broke libcxx because it did not correctly handle cases where the
last iteration of one IV is the second-to-last iteration of another.
Original commit message:
Vectorizing loops with "escaping" IVs has been disabled since r190790, due to
PR17179. This re-enables it, with support for external use of both
"post-increment" (last iteration) and "pre-increment" (second-to-last iteration)
IVs.
llvm-svn: 272742
We do not support splitting cleanuppad or catchswitches. This is
problematic for passes which assume that a loop is in loop simplify
form (the loop would have a dedicated exit block instead of sharing it).
While it isn't great that we don't support this for cleanups, we still
cannot make loop-simplify form an assertable precondition because
indirectbr will also disable these sorts of CFG cleanups.
This fixes PR28132.
llvm-svn: 272739
Nearly all the changes to this pass have been done while maintaining and
updating other parts of LLVM. LLVM has had another pass, SROA, which
has superseded ScalarReplAggregates for quite some time.
Differential Revision: http://reviews.llvm.org/D21316
llvm-svn: 272737
Vectorizing loops with "escaping" IVs has been disabled since r190790, due to
PR17179. This re-enables it, with support for external use of both
"post-increment" (last iteration) and "pre-increment" (second-to-last iteration)
IVs.
Differential Revision: http://reviews.llvm.org/D21048
llvm-svn: 272715
If a local_unnamed_addr attribute is attached to a global, the address
is known to be insignificant within the module. It is distinct from the
existing unnamed_addr attribute in that it only describes a local property
of the module rather than a global property of the symbol.
This attribute is intended to be used by the code generator and LTO to allow
the linker to decide whether the global needs to be in the symbol table. It is
possible to exclude a global from the symbol table if three things are true:
- This attribute is present on every instance of the global (which means that
the normal rule that the global must have a unique address can be broken without
being observable by the program by performing comparisons against the global's
address)
- The global has linkonce_odr linkage (which means that each linkage unit must have
its own copy of the global if it requires one, and the copy in each linkage unit
must be the same)
- It is a constant or a function (which means that the program cannot observe that
the unique-address rule has been broken by writing to the global)
Although this attribute could in principle be computed from the module
contents, LTO clients (i.e. linkers) will normally need to be able to compute
this property as part of symbol resolution, and it would be inefficient to
materialize every module just to compute it.
See:
http://lists.llvm.org/pipermail/llvm-commits/Week-of-Mon-20160509/356401.htmlhttp://lists.llvm.org/pipermail/llvm-commits/Week-of-Mon-20160516/356738.html
for earlier discussion.
Part of the fix for PR27553.
Differential Revision: http://reviews.llvm.org/D20348
llvm-svn: 272709
We move the loop rotate functions in a separate class to avoid passing multiple
parameters to each function. This cleanup will help with further development of
loop rotation. NFC.
Patch written by Aditya Kumar and Sebastian Pop.
Differential Revision: http://reviews.llvm.org/D21311
llvm-svn: 272672
Ensuring that the PHI are all single-operand is not performed in the
second pass added by the previous pass. This removes the assert from
the first pass.
llvm-svn: 272650
We only used to add the edge from the cloned loop to PHIs that
corresponded to values defined by the loop. We need to do this for all
PHIs obviously since we need a PHI operand for each incoming edge.
This includes things like PHIs with a constant value or with values
defined before the original loop (see the testcases).
After the patch the PHIs are added to the exit block in two passes.
In the first pass we ensure there is a single-operand (LCSSA) PHI for
each value defined by the loop.
In the second pass we loop through each (single-operand) PHI and add the
value for the edge from the cloned loop. If the value is defined in the
loop we'll use the cloned instruction from the cloned loop.
Fixes PR28037
llvm-svn: 272649
The need for all these Lookup* functions is just because of calls to
getAnalysis inside methods (i.e. not at the top level) of the
runOnFunction method. They should be straightforward to clean up when
the old PM is gone.
llvm-svn: 272615
This reverts commit r272603 and adds a fix.
Big thanks to Davide for pointing me at r216244 which gives some insight
into how to fix this VS2013 issue. VS2013 can't synthesize a move
constructor. So the fix here is to add one explicitly to the
JumpThreadingPass class.
llvm-svn: 272607
This follows the approach in r263208 (for GVN) pretty closely:
- move the bulk of the body of the function to the new PM class.
- expose a runImpl method on the new-PM class that takes the IRUnitT and
pointers/references to any analyses and use that to implement the
old-PM class.
- use a private namespace in the header for stuff that used to be file
scope
llvm-svn: 272597
This is a bit gnarly since LVI is maintaining its own cache.
I think this port could be somewhat cleaner, but I'd rather not spend
too much time on it while we still have the old pass hanging around and
limiting how much we can clean things up.
Once the old pass is gone it will be easier (less time spent) to clean
it up anyway.
This is the last dependency needed for porting JumpThreading which I'll
do in a follow-up commit (there's no printer pass for LVI or anything to
test it, so porting a pass that depends on it seems best).
I've been mostly following:
r269370 / D18834 which ported Dependence Analysis
r268601 / D19839 which ported BPI
llvm-svn: 272593
This used to be free, copying and moving DebugLocs became expensive
after the metadata rewrite. Passing by reference eliminates a ton of
track/untrack operations. No functionality change intended.
llvm-svn: 272512
Below are my super rough notes when porting. They can probably serve as
a basic guide for porting other passes to the new PM. As I port more
passes I'll expand and generalize this and make a proper
docs/HowToPortToNewPassManager.rst document. There is also missing
documentation for general concepts and API's in the new PM which will
require some documentation.
Once there is proper documentation in place we can put up a list of
passes that have to be ported and game-ify/crowdsource the rest of the
porting (at least of the middle end; the backend is still unclear).
I will however be taking personal responsibility for ensuring that the
LLD/ELF LTO pipeline is ported in a timely fashion. The remaining passes
to be ported are (do something like
`git grep "<the string in the bullet point below>"` to find the pass):
General Scalar:
[ ] Simplify the CFG
[ ] Jump Threading
[ ] MemCpy Optimization
[ ] Promote Memory to Register
[ ] MergedLoadStoreMotion
[ ] Lazy Value Information Analysis
General IPO:
[ ] Dead Argument Elimination
[ ] Deduce function attributes in RPO
Loop stuff / vectorization stuff:
[ ] Alignment from assumptions
[ ] Canonicalize natural loops
[ ] Delete dead loops
[ ] Loop Access Analysis
[ ] Loop Invariant Code Motion
[ ] Loop Vectorization
[ ] SLP Vectorizer
[ ] Unroll loops
Devirtualization / CFI:
[ ] Cross-DSO CFI
[ ] Whole program devirtualization
[ ] Lower bitset metadata
CGSCC passes:
[ ] Function Integration/Inlining
[ ] Remove unused exception handling info
[ ] Promote 'by reference' arguments to scalars
Please let me know if you are interested in working on any of the passes
in the above list (e.g. reply to the post-commit thread for this patch).
I'll probably be tackling "General Scalar" and "General IPO" first FWIW.
Steps as I port "Deduce function attributes in RPO"
---------------------------------------------------
(note: if you are doing any work based on these notes, please leave a
note in the post-commit review thread for this commit with any
improvements / suggestions / incompleteness you ran into!)
Note: "Deduce function attributes in RPO" is a module pass.
1. Do preparatory refactoring.
Do preparatory factoring. In this case all I had to do was to pull out a static helper (r272503).
(TODO: give more advice here e.g. if pass holds state or something)
2. Rename the old pass class.
llvm/lib/Transforms/IPO/FunctionAttrs.cpp
Rename class ReversePostOrderFunctionAttrs -> ReversePostOrderFunctionAttrsLegacyPass
in preparation for adding a class ReversePostOrderFunctionAttrs as the pass in the new PM.
(edit: actually wait what? The new class name will be
ReversePostOrderFunctionAttrsPass, so it doesn't conflict. So this step is
sort of useless churn).
llvm/include/llvm/InitializePasses.h
llvm/lib/LTO/LTOCodeGenerator.cpp
llvm/lib/Transforms/IPO/IPO.cpp
llvm/lib/Transforms/IPO/FunctionAttrs.cpp
Rename initializeReversePostOrderFunctionAttrsPass -> initializeReversePostOrderFunctionAttrsLegacyPassPass
(note that the "PassPass" thing falls out of `s/ReversePostOrderFunctionAttrs/ReversePostOrderFunctionAttrsLegacyPass/`)
Note that the INITIALIZE_PASS macro is what creates this identifier name, so renaming the class requires this renaming too.
Note that createReversePostOrderFunctionAttrsPass does not need to be
renamed since its name is not generated from the class name.
3. Add the new PM pass class.
In the new PM all passes need to have their
declaration in a header somewhere, so you will often need to add a header.
In this case
llvm/include/llvm/Transforms/IPO/FunctionAttrs.h is already there because
PostOrderFunctionAttrsPass was already ported.
The file-level comment from the .cpp file can be used as the file-level
comment for the new header. You may want to tweak the wording slightly
from "this file implements" to "this file provides" or similar.
Add declaration for the new PM pass in this header:
class ReversePostOrderFunctionAttrsPass
: public PassInfoMixin<ReversePostOrderFunctionAttrsPass> {
public:
PreservedAnalyses run(Module &M, AnalysisManager<Module> &AM);
};
Its name should end with `Pass` for consistency (note that this doesn't
collide with the names of most old PM passes). E.g. call it
`<name of the old PM pass>Pass`.
Also, move the doxygen comment from the old PM pass to the declaration of
this class in the header.
Also, include the declaration for the new PM class
`llvm/Transforms/IPO/FunctionAttrs.h` at the top of the file (in this case,
it was already done when the other pass in this file was ported).
Now define the `run` method for the new class.
The main things here are:
a) Use AM.getResult<...>(M) to get results instead of `getAnalysis<...>()`
b) If the old PM pass would have returned "false" (i.e. `Changed ==
false`), then you should return PreservedAnalyses::all();
c) In the old PM getAnalysisUsage method, observe the calls
`AU.addPreserved<...>();`.
In the case `Changed == true`, for each preserved analysis you should do
call `PA.preserve<...>()` on a PreservedAnalyses object and return it.
E.g.:
PreservedAnalyses PA;
PA.preserve<CallGraphAnalysis>();
return PA;
Note that calls to skipModule/skipFunction are not supported in the new PM
currently, so optnone and optimization bisect support do not work. You can
just drop those calls for now.
4. Add the pass to the new PM pass registry to make it available in opt.
In llvm/lib/Passes/PassBuilder.cpp add a #include for your header.
`#include "llvm/Transforms/IPO/FunctionAttrs.h"`
In this case there is already an include (from when
PostOrderFunctionAttrsPass was ported).
Add your pass to llvm/lib/Passes/PassRegistry.def
In this case, I added
`MODULE_PASS("rpo-functionattrs", ReversePostOrderFunctionAttrsPass())`
The string is from the `INITIALIZE_PASS*` macros used in the old pass
manager.
Then choose a test that uses the pass and use the new PM `-passes=...` to
run it.
E.g. in this case there is a test that does:
; RUN: opt < %s -basicaa -functionattrs -rpo-functionattrs -S | FileCheck %s
I have added the line:
; RUN: opt < %s -aa-pipeline=basic-aa -passes='require<targetlibinfo>,cgscc(function-attrs),rpo-functionattrs' -S | FileCheck %s
The `-aa-pipeline=basic-aa` and
`require<targetlibinfo>,cgscc(function-attrs)` are what is needed to run
functionattrs in the new PM (note that in the new PM "functionattrs"
becomes "function-attrs" for some reason). This is just pulled from
`readattrs.ll` which contains the change from when functionattrs was ported
to the new PM.
Adding rpo-functionattrs causes the pass that was just ported to run.
llvm-svn: 272505
It isn't legal to hoist a load past a call which might not return;
even if it doesn't throw, it could, for example, call exit().
Fixes http://llvm.org/PR27953.
llvm-svn: 272495
Summary:
Make isGuaranteedToExecute use the
isGuaranteedToTransferExecutionToSuccessor helper, and make that helper
a bit more accurate.
There's a potential performance impact here from assuming that arbitrary
calls might not return. This probably has little impact on loads and
stores to a pointer because most things alias analysis can reason about
are dereferenceable anyway. The other impacts, like less aggressive
hoisting of sdiv by a variable and less aggressive hoisting around
volatile memory operations, are unlikely to matter for real code.
This also impacts SCEV, which uses the same helper. It's a minor
improvement there because we can tell that, for example, memcpy always
returns normally. Strictly speaking, it's also introducing
a bug, but it's not any worse than everywhere else we assume readonly
functions terminate.
Fixes http://llvm.org/PR27857.
Reviewers: hfinkel, reames, chandlerc, sanjoy
Subscribers: broune, llvm-commits
Differential Revision: http://reviews.llvm.org/D21167
llvm-svn: 272489
Summary:
Dominator updation fails for a loop inserted with a new basicblock.
A block required by DT to set the IDom might not have been cloned yet. This is because there is no predefined ordering of loop blocks (except for the header block which should be the first block in the list).
The patch first creates DT nodes for the cloned blocks and then separately updates the DT in a follow-on loop.
Reviewers: anemet, dberlin
Subscribers: dberlin, llvm-commits
Differential Revision: http://reviews.llvm.org/D20899
llvm-svn: 272479
Summary:
Iterates all (except the first and the last) operands within each GEP
instruction for instrumentation.
Adds test struct_field_gep.ll.
Reviewers: aizatsky
Subscribers: vitalybuka, zhaoqin, kcc, eugenis, bruening, llvm-commits
Differential Revision: http://reviews.llvm.org/D21242
llvm-svn: 272442
Summary:
I can't find a case where we can rotate a loop more than once, and it looks
like we never do this. To rotate a loop following conditions should be met:
1) its header should be exiting
2) its latch shouldn't be exiting
But after the first rotation the header becomes the new latch, so this
condition can never be true any longer.
Tested on with an assert on LNT testsuite and make check.
Reviewers: hfinkel, sanjoy
Subscribers: sebpop, sanjoy, llvm-commits, mzolotukhin
Differential Revision: http://reviews.llvm.org/D20181
llvm-svn: 272439
A memory access defined on function entry cannot be locally dominated by another memory access.
The patch was split from http://reviews.llvm.org/D19338 which exposes the problem.
Differential Revision: http://reviews.llvm.org/D21039
llvm-svn: 272436
Loop unswitching may cause MSan false positive when the unswitch
condition is not guaranteed to execute.
This is very similar to ASan and TSan special case in
llvm::isSafeToSpeculativelyExecute (they don't like speculative loads
and stores), but for branch instructions.
This is a workaround for PR28054.
llvm-svn: 272421
Summary:
Adds ClInstrumentFastpath option to control fastpath instrumentation.
Avoids the load/store instrumentation for the cache fragmentation tool.
Renames cache_frag_basic.ll to working_set_slow.ll for slowpath
instrumentation test.
Adds the __esan_init check in struct_field_count_basic.ll.
Reviewers: aizatsky
Subscribers: llvm-commits, bruening, eugenis, kcc, zhaoqin, vitalybuka
Differential Revision: http://reviews.llvm.org/D21079
llvm-svn: 272355
Summary:
We failed to unpoison uninteresting allocas on return as unpoisoning is part of
main instrumentation which skips such allocas.
Added check -asan-instrument-allocas for dynamic allocas. If instrumentation of
dynamic allocas is disabled it will not will not be unpoisoned.
PR27453
Reviewers: kcc, eugenis
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D21207
llvm-svn: 272341
Summary:
We still want to unpoison full stack even in use-after-return as it can be disabled at runtime.
PR27453
Reviewers: eugenis, kcc
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D21202
llvm-svn: 272334
Instead of directly using MaxFunctionCount and function entry count to determine callee hotness, use the isHotFunction/isColdFunction methods provided by ProfileSummaryInfo.
Differential revision: http://reviews.llvm.org/D21045
llvm-svn: 272321
Previously, we materialized secondary vector IVs from the primary scalar IV,
by offseting the primary to match the correct start value, and then broadcasting
it - inside the loop body. Instead, we can use a real vector IV, like we do for
the primary.
This enables using vector IVs for secondary integer IVs whose type matches the
type of the primary.
Differential Revision: http://reviews.llvm.org/D20932
llvm-svn: 272283
Summary:
This fixes PR26682. Also add LCSSA as a preserved pass to LoopSimplify,
that looks correct to me and allows to write a test for the issue.
Reviewers: chandlerc, bogner, sanjoy
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D21112
llvm-svn: 272224
Summary:
This fixes PR27617.
Bug description: The SLPVectorizer asserts on encountering GEPs with different index types, such as i8 and i64.
The patch includes a simple relaxation of the assert to allow constants being of different types, along with a regression test that will provoke the unrelaxed assert.
Reviewers: nadav, mzolotukhin
Subscribers: JesperAntonsson, llvm-commits, mzolotukhin
Differential Revision: http://reviews.llvm.org/D20685
Patch by Jesper Antonsson!
llvm-svn: 272206
with user specified count has been applied.
Summary:
Previously SetLoopAlreadyUnrolled() set the disable pragma only if
there was some loop metadata.
Now it set the pragma in all cases. This helps to prevent multiple
unroll when -unroll-count=N is given.
Reviewers: mzolotukhin
Differential Revision: http://reviews.llvm.org/D20765
From: Evgeny Stupachenko <evstupac@gmail.com>
llvm-svn: 272195
As suggested by clang-tidy's performance-unnecessary-copy-initialization.
This can easily hit lifetime issues, so I audited every change and ran the
tests under asan, which came back clean.
llvm-svn: 272126
Unlike native shifts, the AVX2 per-element shift instructions VPSRAV/VPSRLV/VPSLLV handle out of range shift values (logical shifts set the result to zero, arithmetic shifts splat the sign bit).
If the shift amount is constant we can sometimes convert these instructions to native shifts:
1 - if all shift amounts are in range then the conversion is trivial.
2 - out of range arithmetic shifts can be clamped to the (bitwidth - 1) (a legal shift amount) before conversion.
3 - logical shifts just return zero if all elements have out of range shift amounts.
In addition, UNDEF shift amounts are handled - either as an UNDEF shift amount in a native shift or as an UNDEF in the logical 'all out of range' zero constant special case for logical shifts.
Differential Revision: http://reviews.llvm.org/D19675
llvm-svn: 271996
This patch adds support for folding undef/zero/constant inputs to MOVMSK instructions.
The SSE/AVX versions can be fully folded, but the MMX version can only handle undef inputs.
Differential Revision: http://reviews.llvm.org/D20998
llvm-svn: 271990
scalarizePHI only looked for phis that have exactly two uses - the "latch"
use, and an extract. Unfortunately, we can not assume all equivalent extracts
are CSE'd, since InstCombine itself may create an extract which is a duplicate
of an existing one. This extends it to handle several distinct extracts from
the same index.
This should fix at least some of the performance regressions from PR27988.
Differential Revision: http://reviews.llvm.org/D20983
llvm-svn: 271961
Summary:
Fix LSRInstance::HoistInsertPosition() to check the original insert
position block first for a canonical insertion point that is dominated
by all inputs. This leads to SCEV being able to reuse more instructions
since it currently tracks the instructions it creates for reuse by
keeping a table of <Value, insert point> pairs.
Originally reviewed in http://reviews.llvm.org/D18001
Reviewers: atrick
Subscribers: llvm-commits, mzolotukhin, mcrosier
Differential Revision: http://reviews.llvm.org/D18480
llvm-svn: 271929
In r271810 ( http://reviews.llvm.org/rL271810 ), I loosened the check
above this to work for any Constant rather than ConstantInt. AFAICT,
that part makes sense if we can determine that the shrunken/extended
constant remained equal. But it doesn't make sense for this later
transform where we assume that the constant DID change.
This could assert for a ConstantExpr:
https://llvm.org/bugs/show_bug.cgi?id=28011
And it could be wrong for a vector as shown in the added regression test.
llvm-svn: 271908
Summary:
This hasn't been caught before because it requires noalias or similarly
strong alias analysis to actually reproduce.
Fixes http://llvm.org/PR27952 .
Reviewers: hfinkel, sanjoy
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D20944
llvm-svn: 271858
Since FoldOpIntoPhi speculates the binary operation to potentially each
of the predecessors of the PHI node (pulling it out of arbitrary control
dependence in the process), we can FoldOpIntoPhi only if we know the
operation doesn't have UB.
This also brings up an interesting profitability question -- the way it
is written today, commonIRemTransforms will hoist out work from
dynamically dead code into code that will execute at runtime. Perhaps
that isn't the best canonicalization?
Fixes PR27968.
llvm-svn: 271857
Summary:
There are some rough corners, since the new pass manager doesn't have
(as far as I can tell) LoopSimplify and LCSSA, so I've updated the
tests to run them separately in the old pass manager in the lit tests.
We also don't have an equivalent for AU.setPreservesCFG() in the new
pass manager, so I've left a FIXME.
Reviewers: bogner, chandlerc, davide
Subscribers: sanjoy, mcrosier, llvm-commits
Differential Revision: http://reviews.llvm.org/D20783
llvm-svn: 271846
Change the name of the ICmpInst to 'ICmp' and the Constant (was a ConstantInt) to 'C',
so that it's hopefully clearer that 'CI' refers to CastInst in this context.
While we're scrubbing, fix the documentation comment and use 'auto' with 'dyn_cast'.
llvm-svn: 271817
A basic block could contain:
%cp = cleanuppad []
cleanupret from %cp unwind to caller
This basic block is empty and is thus a candidate for removal. However,
there can be other uses of %cp outside of this basic block. This is
only possible in unreachable blocks.
Make our transform more correct by checking that the pad has a single
user before removing the BB.
This fixes PR28005.
llvm-svn: 271816
Add the MMX implementation to the SimplifyDemandedUseBits SSE/AVX MOVMSK support added in D19614
Requires a minor tweak as llvm.x86.mmx.pmovmskb takes a x86_mmx argument - so we have to be explicit about the implied v8i8 vector type.
llvm-svn: 271789
Summary:
Adds an option -esan-assume-intra-cache-line which causes esan to assume
that a single memory access touches just one cache line, even if it is not
aligned, for better performance at a potential accuracy cost. Experiments
show that the performance difference can be 2x or more, and accuracy loss
is typically negligible, so we turn this on by default. This currently
applies just to the working set tool.
Reviewers: aizatsky
Subscribers: vitalybuka, zhaoqin, kcc, eugenis, llvm-commits
Differential Revision: http://reviews.llvm.org/D20978
llvm-svn: 271743
Summary:
Adds a global variable to specify the tool, to support handling early
interceptors that invoke instrumented code and require shadow memory to be
initialized prior to __esan_init() being invoked.
Reviewers: aizatsky
Subscribers: vitalybuka, zhaoqin, kcc, eugenis, llvm-commits
Differential Revision: http://reviews.llvm.org/D20973
llvm-svn: 271715
There was concern that creating bitcasts for the simpler potential select pattern:
define <2 x i64> @vecBitcastOp1(<4 x i1> %cmp, <2 x i64> %a) {
%a2 = add <2 x i64> %a, %a
%sext = sext <4 x i1> %cmp to <4 x i32>
%bc = bitcast <4 x i32> %sext to <2 x i64>
%and = and <2 x i64> %a2, %bc
ret <2 x i64> %and
}
might lead to worse code for some targets, so this patch is matching the larger
patterns seen in the test cases.
The motivating example for this patch is this IR produced via SSE intrinsics in C:
define <2 x i64> @gibson(<2 x i64> %a, <2 x i64> %b) {
%t0 = bitcast <2 x i64> %a to <4 x i32>
%t1 = bitcast <2 x i64> %b to <4 x i32>
%cmp = icmp sgt <4 x i32> %t0, %t1
%sext = sext <4 x i1> %cmp to <4 x i32>
%t2 = bitcast <4 x i32> %sext to <2 x i64>
%and = and <2 x i64> %t2, %a
%neg = xor <4 x i32> %sext, <i32 -1, i32 -1, i32 -1, i32 -1>
%neg2 = bitcast <4 x i32> %neg to <2 x i64>
%and2 = and <2 x i64> %neg2, %b
%or = or <2 x i64> %and, %and2
ret <2 x i64> %or
}
For an AVX target, this is currently:
vpcmpgtd %xmm1, %xmm0, %xmm2
vpand %xmm0, %xmm2, %xmm0
vpandn %xmm1, %xmm2, %xmm1
vpor %xmm1, %xmm0, %xmm0
retq
With this patch, it becomes:
vpmaxsd %xmm1, %xmm0, %xmm0
Differential Revision: http://reviews.llvm.org/D20774
llvm-svn: 271676
Summary:
Instrument GEP instruction for counting the number of struct field
address calculation to approximate the number of struct field accesses.
Adds test struct_field_count_basic.ll to test the struct field
instrumentation.
Reviewers: bruening, aizatsky
Subscribers: junbuml, zhaoqin, llvm-commits, eugenis, vitalybuka, kcc, bruening
Differential Revision: http://reviews.llvm.org/D20892
llvm-svn: 271619
In r270478, where I enabled the new heuristic I posted testing results,
which I got when explicitly passed the thresholds values via CL options.
However, setting the CL options init-values is not enough to change the
default values of thresholds, so I'm changing them in another place now.
llvm-svn: 271615
In preparation for porting to the new PM.
Patch by Jake VanAdrighem! (review mainly by me/Justin)
Differential Revision: http://reviews.llvm.org/D20610
llvm-svn: 271607
Summary:
The module pass pipeline includes a late LICM run after loop
unrolling. LCSSA is implicitly run as a pass dependency of LICM. However no
cleanup pass was run after this, so the LCSSA nodes ended in the optimized output.
Reviewers: hfinkel, mehdi_amini
Subscribers: majnemer, bruno, mzolotukhin, mehdi_amini, llvm-commits
Differential Revision: http://reviews.llvm.org/D20606
llvm-svn: 271602
This is effectively NFC because we already do this transform after r175380:
http://reviews.llvm.org/rL175380
and also via foldBoolSextMaskToSelect().
This change should just make it a bit more efficient to match the pattern.
The original guard was added in r95058:
http://reviews.llvm.org/rL95058
A sampling of codegen for current in-tree targets shows no problems. This
makes sense given that we're already producing the vector selects via the
other transforms.
llvm-svn: 271554
Inline virtual functions has linkeonceodr linkage (emitted in comdat on
supporting targets). If the vtable for the class is not emitted in the
defining module, function won't be address taken thus its address is not
recorded. At the mercy of the linker, if the per-func prf_data from this
module (in comdat) is picked at link time, we will lose mapping from
function address to its hash val. This leads to missing icall promotion.
The second test case (currently disabled) in compiler_rt (r271528):
instrprof-icall-prom.test demostrates the bug. The first profile-use
subtest is fine due to linker order difference.
With this change, no missing icall targets is found in instrumented clang's
raw profile.
llvm-svn: 271532
Add support for the new pass manager to MemorySSA pass.
Change MemorySSA to be computed eagerly upon construction.
Change MemorySSAWalker to be owned by the MemorySSA object that creates
it.
Reviewers: dberlin, george.burgess.iv
Subscribers: mcrosier, llvm-commits
Differential Revision: http://reviews.llvm.org/D19664
llvm-svn: 271432
Previously, whenever we needed a vector IV, we would create it on the fly,
by splatting the scalar IV and adding a step vector. Instead, we can create a
real vector IV. This tends to save a couple of instructions per iteration.
This only changes the behavior for the most basic case - integer primary
IVs with a constant step.
Differential Revision: http://reviews.llvm.org/D20315
llvm-svn: 271410
This will be necessary to allow the global merge pass to attach
multiple debug info metadata nodes to global variables once we reverse
the edge from DIGlobalVariable to GlobalVariable.
Differential Revision: http://reviews.llvm.org/D20414
llvm-svn: 271358
This patch fixes bug https://llvm.org/bugs/show_bug.cgi?id=27897.
When query memory access cost, current SLP always passes in alignment value of 1 (unaligned), so it gets a very high cost of scalar memory access, and wrongly vectorize memory loads in the test case.
It can be fixed by simply giving correct alignment.
llvm-svn: 271333
The assumption, made in insert() that weak functions are always inserted after strong functions,
is only true in the first round of adding functions.
In subsequent rounds this is no longer guaranteed , because we might remove a strong function from the tree (because it's modified) and add it later,
where an equivalent weak function already exists in the tree.
This change removes the assert in insert() and explicitly enforces a weak->strong order.
This also removes the need of two separate loops in runOnModule().
llvm-svn: 271299
Summary:
Creates a global variable containing preliminary information
for the cache-fragmentation tool runtime.
Passes a pointer to the variable (null if no variable is created) to the
compilation unit init and exit routines in the runtime.
Reviewers: aizatsky, bruening
Subscribers: filcab, kubabrecka, bruening, kcc, vitalybuka, eugenis, llvm-commits, zhaoqin
Differential Revision: http://reviews.llvm.org/D20541
llvm-svn: 271298
This adds support to the backed to actually support SjLj EH as an exception
model. This is *NOT* the default model, and requires explicitly opting into it
from the frontend. GCC supports this model and for MinGW can still be enabled
via the `--using-sjlj-exceptions` options.
Addresses PR27749!
llvm-svn: 271244
Since we already assert that the outgoing IR is in LCSSA, it is easy to
get misled into thinking that -indvars broke LCSSA if the incoming IR is
non-LCSSA. Checking this pre-condition will make such cases break in
more obvious ways.
Inspired by (but does _not_ fix) PR26682.
llvm-svn: 271196
Summary:
If we can prove that an op.with.overflow intrinsic does not overflow, we
can get rid of the intrinsic, and replace it with non-wrapping
arithmetic.
This was first checked in at r265913 but reverted in r265950 because it
exposed some issues around how SCEV handled post-inc add recurrences.
Those issues have now been fixed.
Reviewers: atrick, regehr
Subscribers: sanjoy, mcrosier, llvm-commits
Differential Revision: http://reviews.llvm.org/D18685
llvm-svn: 271153
This patch removes the llvm intrinsics VPMOVSX and (V)PMOVZX sign/zero extension intrinsics and auto-upgrades to SEXT/ZEXT calls instead. We already did this for SSE41 PMOVSX sometime ago so much of that implementation can be reused.
Reapplied now that the the companion patch (D20684) removes/auto-upgrade the clang intrinsics has been committed.
Differential Revision: http://reviews.llvm.org/D20686
llvm-svn: 271131
Summary:
When RF_NullMapMissingGlobalValues is set, mapValue can return null
for GlobalValue. When mapping the operands of a constant that is
referenced from metadata, we need to handle this case and actually
return null instead of mapping this constant.
Reviewers: dexonsmith, rafael
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D20713
llvm-svn: 271129
It was triggering an msan bot.
Revert "[IRPGO] Set the function entry count metadata."
This reverts commit r271090.
Revert "[IRPGO] Centralize the function attribute inliner hint logic. NFC."
This reverts commit r271089.
llvm-svn: 271091
Summary:
Unroll factor (Count) calculations moved to a new function.
Early exits on pragma and "-unroll-count" defined factor added.
New type of unrolling "Force" introduced (previously used implicitly).
New unroll preference "AllowRemainder" introduced and set "true" by default.
(should be set to false for architectures that suffers from it).
Reviewers: hfinkel, mzolotukhin, zzheng
Differential Revision: http://reviews.llvm.org/D19553
From: Evgeny Stupachenko <evstupac@gmail.com>
llvm-svn: 271071
When we traced through a phi node looking for floating-point reductions, we
forgot whether we'd ever seen an instruction without fast-math flags (that
would block vectorization). This propagates it through to the end.
llvm-svn: 271015
Currently we consider that each constant has itself as a base value. I.e "base(const) = const".
This introduces couple of problems when we are trying to avoid reporting constants in statepoint live sets:
1. When querying "base( phi(const1, const2) )" we will get "phi(const1, const2)" as a base pointer. Since
it's not a constant we will record it in a stack map. However on practice we don't want this to happen
(constant are never relocated).
2. base( phi(const, gc ptr) ) = phi( const, base(gc ptr) ). This particular case imposes challenge on our
runtime - we don't expect to see constant base pointers other than null. This problems can be avoided
by treating all constant as if they were derived from null pointer base. I.e in a first case we will
not include constant pointer in a stack map at all. In a second case we will get "phi(null, base(gc ptr))"
as a base pointer which is a lot more convenient.
Differential Revision: http://reviews.llvm.org/D20584
llvm-svn: 270993
This patch removes the llvm intrinsics VPMOVSX and (V)PMOVZX sign/zero extension intrinsics and auto-upgrades to SEXT/ZEXT calls instead. We already did this for SSE41 PMOVSX sometime ago so much of that implementation can be reused.
A companion patch (D20684) removes/auto-upgrade the clang intrinsics.
Differential Revision: http://reviews.llvm.org/D20686
llvm-svn: 270973
objc_storeStrong can be formed from a sequence such as
%0 = tail call i8* @objc_retain(i8* %p) nounwind
%tmp = load i8*, i8** @x, align 8
store i8* %0, i8** @x, align 8
tail call void @objc_release(i8* %tmp) nounwind
The code was already looking through bitcasts for most of the values
involved, but had missed one case where the pointer operand for the
store was a bitcast. Ultimately the pointer for the load and store
have to be the same value, after stripping casts.
llvm-svn: 270955
If every operands of a constant are mapping to themselves, and the
type does not change, we have an early exit as acknowledged in the
comment:
// Otherwise, we have some other constant to remap. Start by checking to see
// if all operands have an identity remapping.
However instead of checking for identity the code was checking if the
operands were mapped to the constant itself, which is rarely true.
As a consequence, the coverage report showed that the early exit was
never taken.
llvm-svn: 270944
Condition might be simplified to a Constant, but it doesn't have to be
ConstantInt, so we should dyn_cast, instead of cast.
This fixes PR27886.
llvm-svn: 270924
An exception could prevent a store from occurring but MemCpyOpt's
callslot optimization would fire anyway, causing the store to occur.
This fixes PR27849.
llvm-svn: 270892
The problem with plugins on Windows is that when building a plugin DLL it needs
to explicitly link against something (an exe or DLL) if it uses symbols from
that thing, and that thing must explicitly export those symbols. Also there's a
limit of 65535 symbols that can be exported. This means that currently plugins
only work on Windows when using BUILD_SHARED_LIBS, and that doesn't work with
MSVC.
This patch adds an LLVM_EXPORT_SYMBOLS_FOR_PLUGINS option, which when enabled
automatically exports from all LLVM tools the symbols that a plugin could want
to use so that a plugin can link against a tool directly. Plugins can specify
what tool they link against by using PLUGIN_TOOL argument to llvm_add_library.
The option can also be enabled on Linux, though there all it should do is
restrict the set of symbols that are exported as by default all symbols are
exported.
This option is currently OFF by default, as while I've verified that it works
with MSVC, linux gcc, and cygwin gcc, I haven't tried mingw gcc and I have no
idea what will happen on OSX. Also unfortunately we can't turn on
LLVM_ENABLE_PLUGINS when the option is ON as bugpoint-passes needs to be
loaded by both bugpoint.exe and opt.exe which is incompatible with this
approach. Also currently clang plugins don't work with this approach, which
will be fixed in future patches.
Differential Revision: http://reviews.llvm.org/D18826
llvm-svn: 270839
It is unsafe to hoist a load before a function call which may throw, the
throw might prevent a pointer dereference.
Likewise, it is unsafe to sink a store after a call which may throw.
The caller might be able to observe the difference.
This fixes PR27858.
llvm-svn: 270828
It turns out that too many passes are relying on alias analysis results
for control dependencies. Until we fix that by introducing a more accurate
modelling of control dependencies, special case assume in MemorySSA instead.
Also introduce tests to ensure we don't regress the FunctionAttrs or LICM
passes.
Differential Revision: http://reviews.llvm.org/D20658
llvm-svn: 270823
There is only one caller of MemorySSA::createNewAccess, and it passes true
as the IgnoreNonMemory argument. Remove that argument and fold its behavior
into createNewAccess.
llvm-svn: 270812
After this change, we do the expected thing for cases like
```
Check0Passed = /* range check IRCE can optimize */
Check1Passed = /* range check IRCE can optimize */
if (!(Check0Passed && Check1Passed))
throw_Exception();
```
llvm-svn: 270804
As a result of D18634 we no longer infer certain attributes on linkonce_odr
functions at compile time, and may only infer them at LTO time. The readnone
attribute in particular is required for virtual constant propagation (part
of whole-program virtual call optimization) to work correctly.
This change moves the whole-program virtual call optimization pass after
the function attribute inference passes, and enables the attribute inference
passes at opt level 1, so that virtual constant propagation has a chance to
work correctly for linkonce_odr functions.
Differential Revision: http://reviews.llvm.org/D20643
llvm-svn: 270765
It may materialize a declaration, or a definition. The name could
be misleading. This is following a merge of materializeInitFor()
into materializeDeclFor().
Differential Revision: http://reviews.llvm.org/D20593
llvm-svn: 270759
They were originally separated to handle the co-recursion between
the ValueMapper and the ValueMaterializer. This recursion does not
exist anymore: the ValueMapper now uses a Worklist and the
ValueMaterializer is scheduling job on the Worklist.
Differential Revision: http://reviews.llvm.org/D20593
From: Mehdi Amini <mehdi.amini@apple.com>
llvm-svn: 270758
Also, rename recognizeBitReverseOrBSwapIdiom to recognizeBSwapOrBitReverseIdiom,
so the ordering of the MatchBSwaps and MatchBitReversals arguments are
consistent with the function name.
llvm-svn: 270715
Move the now index-based ODR resolution and internalization routines out
of ThinLTOCodeGenerator.cpp and into either LTO.cpp (index-based
analysis) or FunctionImport.cpp (index-driven optimizations).
This is to enable usage by other linkers.
llvm-svn: 270698
Followup to D20528 clang patch, this removes the (V)CVTDQ2PD(Y) and (V)CVTPS2PD(Y) llvm intrinsics and auto-upgrades to sitofp/fpext instead.
Differential Revision: http://reviews.llvm.org/D20568
llvm-svn: 270678
A volatile load has side effects beyond what callers expect readonly to
signify. For example, it is not safe to reorder two function calls
which each perform a volatile load to the same memory location.
llvm-svn: 270671
Summary:
Adds fastpath instrumentation for esan's working set tool. The
instrumentation for an intra-cache-line load or store consists of an
inlined write to shadow memory bits for the corresponding cache line.
Adds a basic test for this instrumentation.
Reviewers: aizatsky
Subscribers: vitalybuka, zhaoqin, kcc, eugenis, llvm-commits
Differential Revision: http://reviews.llvm.org/D20483
llvm-svn: 270640
Summary:
Adds createEsanInitToolGV for creating a tool-specific variable passed
to the runtime library.
Adds dtor "esan.module_dtor" and inserts calls from the dtor to
"__esan_exit" in the runtime library.
Updates the EfficiencySanitizer test.
Patch by Qin Zhao.
Reviewers: aizatsky
Subscribers: bruening, kcc, vitalybuka, eugenis, llvm-commits
Differential Revision: http://reviews.llvm.org/D20488
llvm-svn: 270627
This changes IRCE to optimize uses, and not branches. This change is
NFCI since the uses we do inspect are in practice only ever going to be
the condition use in conditional branches; but this flexibility will
later allow us to analyze more complex expressions than just a direct
branch on a range check.
llvm-svn: 270500
When an aggregate contains an opaque type its size cannot be
determined. This triggers an "Invalid GetElementPtrInst indices for type" assert
in function checkGEPType. The fix suppresses the conversion in this case.
http://reviews.llvm.org/D20319
llvm-svn: 270479
Summary:
This patch turns on LoopUnrollAnalyzer by default. To mitigate compile
time regressions, I chose very conservative thresholds for now. Later we
can make them more aggressive, but it might require being smarter in
which loops we're optimizing. E.g. currently the biggest issue is that
with more agressive thresholds we unroll many cold loops, which
increases compile time for no performance benefit (performance of those
loops is improved, but it doesn't matter since they are cold).
Test results for compile time(using 4 samples to reduce noise):
```
MultiSource/Benchmarks/VersaBench/ecbdes/ecbdes 5.19%
SingleSource/Benchmarks/Polybench/medley/reg_detect/reg_detect 4.19%
MultiSource/Benchmarks/FreeBench/fourinarow/fourinarow 3.39%
MultiSource/Applications/JM/lencod/lencod 1.47%
MultiSource/Benchmarks/Fhourstones-3_1/fhourstones3_1 -6.06%
```
I didn't see any performance changes in the testsuite, but it improves
some internal tests.
Reviewers: hfinkel, chandlerc
Subscribers: llvm-commits, mzolotukhin
Differential Revision: http://reviews.llvm.org/D20482
llvm-svn: 270478
Sanjay Patel