372 lines
20 KiB
YAML
372 lines
20 KiB
YAML
# RUN: llc %s -o - -experimental-debug-variable-locations=true \
|
|
# RUN: -run-pass=livedebugvalues \
|
|
# RUN: | FileCheck %s --implicit-check-not=DBG_VALUE
|
|
# RUN: llc %s -o - -experimental-debug-variable-locations=true \
|
|
# RUN: -start-before=livedebugvalues -filetype=obj \
|
|
# RUN: | llvm-dwarfdump - | FileCheck %s --check-prefix=DWARF
|
|
#
|
|
# LLVM can produce DIExpressions that convert from one value of arbitrary size
|
|
# to another. This is normally fine, however that means the value for a
|
|
# variable tracked in instruction referencing might not be the same size as the
|
|
# variable itself.
|
|
#
|
|
# This becomes a problem when values move onto the stack and we emit
|
|
# DW_OP_deref: there is no information about how large a value the consumer
|
|
# should load from the stack. The convention today appears to be the size of
|
|
# the variable, and as a result if you have a value that's smaller than the
|
|
# variable size, extra information is loaded onto the DWARF expression stack.
|
|
# This then appears as a false variable value to the consumer.
|
|
#
|
|
# In this test, there are various scenarios to test where the size of the value
|
|
# needs to reach the expression emitter in LiveDebugValues. However, there are
|
|
# even more scenarios to consider where the value is in a spill slot, and:
|
|
# * The value is larger than the variable, the same, or smaller,
|
|
# * The variable is a normal scalar, or a fragment,
|
|
# * There is a DW_OP_stack_value in the expression, or not
|
|
# That gives us twelve situations to consider, and the easiest way to confirm
|
|
# correctness is to write them all out. The final DWARF expressions to
|
|
# produce are:
|
|
# * No stack value,
|
|
# * Scalar (32 bits),
|
|
# * Larger value (64 bits)
|
|
# DW_OP_breg7 RSP-8, DW_OP_deref_size 0x8, DW_OP_stack_value
|
|
# * Same value (32 bits)
|
|
# DW_OP_breg7 RSP-8
|
|
# * Smaller value (8 bits)
|
|
# DW_OP_breg7 RSP-8, DW_OP_deref_size 0x1, DW_OP_stack_value
|
|
# * Fragment (32 bits)
|
|
# * Larger value (64 bits)
|
|
# DW_OP_breg7 RSP-8, DW_OP_deref_size 0x8, DW_OP_stack_value, DW_OP_piece 0x4
|
|
# * Same value (32 bits)
|
|
# DW_OP_breg7 RSP-8, DW_OP_piece 0x4
|
|
# * Smaller value (8 bits)
|
|
# DW_OP_breg7 RSP-8, DW_OP_deref_size 0x1, DW_OP_stack_value, DW_OP_piece 0x4
|
|
# * Stack value (imagine there was some arithmetic on the stack before the
|
|
# DW_OP_stack_value opcode),
|
|
# * Scalar (32 bits),
|
|
# * Larger value (64 bits)
|
|
# DW_OP_breg7 RSP-8, DW_OP_deref_size 0x8, DW_OP_stack_value
|
|
# * Same value (32 bits)
|
|
# DW_OP_breg7 RSP-8, DW_OP_deref, DW_OP_stack_value
|
|
# * Smaller value (8 bits)
|
|
# DW_OP_breg7 RSP-8, DW_OP_deref_size 0x1, DW_OP_stack_value
|
|
# * Fragment (32 bits)
|
|
# * Larger value (64 bits)
|
|
# DW_OP_breg7 RSP-8, DW_OP_deref_size 0x8, DW_OP_stack_value, DW_OP_piece 0x4
|
|
# * Same value (32 bits)
|
|
# DW_OP_breg7 RSP-8, DW_OP_deref_size 0x4, DW_OP_stack_value, DW_OP_piece 0x4
|
|
# * Smaller value (8 bits)
|
|
# DW_OP_breg7 RSP-8, DW_OP_deref_size 0x1, DW_OP_stack_value, DW_OP_piece 0x4
|
|
#
|
|
# The outlier from the pattern is (Stack value, Fragment, Same value size): we
|
|
# put a DW_OP_deref_size in where a DW_OP_deref could have sufficied. However,
|
|
# if we used DW_OP_deref, it would force the consumer to derive the deref size
|
|
# from the DW_OP_piece, which is un-necessarily hard.
|
|
|
|
## Capture variable num,
|
|
# CHECK-DAG: ![[VARNUM:[0-9]+]] = !DILocalVariable(name: "flannel",
|
|
# CHECK-DAG: ![[VARNUM2:[0-9]+]] = !DILocalVariable(name: "shoes",
|
|
|
|
# DWARF: DW_TAG_variable
|
|
# DWARF-NEXT: DW_AT_location
|
|
## Defined in register, spilt to stack.
|
|
# DWARF-NEXT: DW_OP_breg0 RAX+0, DW_OP_constu 0xff, DW_OP_and, DW_OP_convert (0x00000026) "DW_ATE_signed_8", DW_OP_convert (0x0000002a) "DW_ATE_signed_32", DW_OP_stack_value
|
|
# DWARF-NEXT: DW_OP_breg7 RSP-8, DW_OP_deref_size 0x1, DW_OP_convert (0x00000026) "DW_ATE_signed_8", DW_OP_convert (0x0000002a) "DW_ATE_signed_32", DW_OP_stack_value
|
|
## Defined on stack.
|
|
# DWARF-NEXT: DW_OP_breg7 RSP-8, DW_OP_deref_size 0x1, DW_OP_convert (0x00000026) "DW_ATE_signed_8", DW_OP_convert (0x0000002a) "DW_ATE_signed_32", DW_OP_stack_value
|
|
## DBG_PHI that moves to stack.
|
|
# DWARF-NEXT: DW_OP_breg7 RSP-8, DW_OP_deref_size 0x1, DW_OP_stack_value
|
|
## DBG_PHI of stack with size.
|
|
# DWARF-NEXT: DW_OP_breg7 RSP-8, DW_OP_deref_size 0x2, DW_OP_stack_value
|
|
## Followed by scalar / no-stack-value locations with various sizes.
|
|
# DWARF-NEXT: DW_OP_breg7 RSP-8, DW_OP_deref_size 0x8, DW_OP_stack_value
|
|
# DWARF-NEXT: DW_OP_breg7 RSP-8
|
|
# DWARF-NEXT: DW_OP_breg7 RSP-8, DW_OP_deref_size 0x1, DW_OP_stack_value
|
|
## scalar / stack value with various sizes.
|
|
# DWARF-NEXT: DW_OP_breg7 RSP-8, DW_OP_deref_size 0x8, DW_OP_lit1, DW_OP_plus, DW_OP_stack_value
|
|
# DWARF-NEXT: DW_OP_breg7 RSP-8, DW_OP_deref, DW_OP_lit1, DW_OP_plus, DW_OP_stack_value
|
|
# DWARF-NEXT: DW_OP_breg7 RSP-8, DW_OP_deref_size 0x1, DW_OP_lit1, DW_OP_plus, DW_OP_stack_value)
|
|
# DWARF: DW_AT_name ("flannel")
|
|
|
|
# Variable with fragments.
|
|
# DWARF: DW_TAG_variable
|
|
# DWARF-NEXT: DW_AT_location
|
|
## Scalar / no-stack-value locations with various sizes.
|
|
# DWARF-NEXT: DW_OP_breg7 RSP-8, DW_OP_deref_size 0x8, DW_OP_stack_value, DW_OP_piece 0x4
|
|
# DWARF-NEXT: DW_OP_breg7 RSP-8, DW_OP_piece 0x4
|
|
# DWARF-NEXT: DW_OP_breg7 RSP-8, DW_OP_deref_size 0x1, DW_OP_stack_value, DW_OP_piece 0x4
|
|
## Scalar / stack value with various sizes.
|
|
# DWARF-NEXT: DW_OP_breg7 RSP-8, DW_OP_deref_size 0x8, DW_OP_lit1, DW_OP_plus, DW_OP_stack_value, DW_OP_piece 0x4
|
|
# DWARF-NEXT: DW_OP_breg7 RSP-8, DW_OP_deref_size 0x4, DW_OP_lit1, DW_OP_plus, DW_OP_stack_value, DW_OP_piece 0x4
|
|
# DWARF-NEXT: DW_OP_breg7 RSP-8, DW_OP_deref_size 0x1, DW_OP_lit1, DW_OP_plus, DW_OP_stack_value, DW_OP_piece 0x4)
|
|
# DWARF: DW_AT_name ("shoes")
|
|
|
|
--- |
|
|
; ModuleID = 'missingvar.ll'
|
|
source_filename = "a"
|
|
target datalayout = "e-m:e-p270:32:32-p271:32:32-p272:64:64-i64:64-f80:128-n8:16:32:64-S128"
|
|
target triple = "x86_64-unknown-linux-gnu"
|
|
|
|
define linkonce_odr void @_ZNSt5dequeIPN4llvm4LoopESaIS2_EE13_M_insert_auxESt15_Deque_iteratorIS2_RS2_PS2_EmRKS2_() local_unnamed_addr align 2 !dbg !3 {
|
|
entry:
|
|
call void @llvm.dbg.value(metadata i32 0, metadata !8, metadata !DIExpression()), !dbg !7
|
|
call void @llvm.dbg.value(metadata i32 0, metadata !10, metadata !DIExpression()), !dbg !7
|
|
ret void
|
|
}
|
|
|
|
declare void @llvm.dbg.value(metadata, metadata, metadata)
|
|
|
|
!llvm.module.flags = !{!0, !9}
|
|
!llvm.dbg.cu = !{!1}
|
|
|
|
!0 = !{i32 2, !"Debug Info Version", i32 3}
|
|
!1 = distinct !DICompileUnit(language: DW_LANG_C_plus_plus, file: !2, producer: "beards", isOptimized: true, runtimeVersion: 4, emissionKind: FullDebug)
|
|
!2 = !DIFile(filename: "bees.cpp", directory: "")
|
|
!3 = distinct !DISubprogram(name: "nope", scope: !2, file: !2, line: 1, type: !4, spFlags: DISPFlagDefinition, unit: !1)
|
|
!4 = !DISubroutineType(types: !5)
|
|
!5 = !{!6}
|
|
!6 = !DIBasicType(name: "int", size: 32, encoding: DW_ATE_signed)
|
|
!7 = !DILocation(line: 1, scope: !3)
|
|
!8 = !DILocalVariable(name: "flannel", scope: !3, type: !6)
|
|
!9 = !{i32 2, !"Dwarf Version", i32 5}
|
|
!10 = !DILocalVariable(name: "shoes", scope: !3, type: !11)
|
|
!11 = !DIBasicType(name: "long", size: 64, encoding: DW_ATE_signed)
|
|
|
|
|
|
...
|
|
---
|
|
name: _ZNSt5dequeIPN4llvm4LoopESaIS2_EE13_M_insert_auxESt15_Deque_iteratorIS2_RS2_PS2_EmRKS2_
|
|
alignment: 16
|
|
tracksRegLiveness: true
|
|
liveins:
|
|
- { reg: '$rdi' }
|
|
- { reg: '$rsi' }
|
|
- { reg: '$rdx' }
|
|
frameInfo:
|
|
stackSize: 48
|
|
offsetAdjustment: -48
|
|
maxAlignment: 8
|
|
maxCallFrameSize: 0
|
|
cvBytesOfCalleeSavedRegisters: 48
|
|
fixedStack:
|
|
- { id: 0, type: spill-slot, offset: -56, size: 8, alignment: 8, callee-saved-register: '$rbx' }
|
|
- { id: 1, type: spill-slot, offset: -48, size: 8, alignment: 16, callee-saved-register: '$r12' }
|
|
- { id: 2, type: spill-slot, offset: -40, size: 8, alignment: 8, callee-saved-register: '$r13' }
|
|
- { id: 3, type: spill-slot, offset: -32, size: 8, alignment: 16, callee-saved-register: '$r14' }
|
|
- { id: 4, type: spill-slot, offset: -24, size: 8, alignment: 8, callee-saved-register: '$r15' }
|
|
- { id: 5, type: spill-slot, offset: -16, size: 8, alignment: 16, callee-saved-register: '$rbp' }
|
|
stack:
|
|
- { id: 0, type: spill-slot, offset: -64, size: 8, alignment: 8 }
|
|
machineFunctionInfo: {}
|
|
body: |
|
|
bb.0.entry:
|
|
liveins: $rdi, $rdx, $rsi, $rbp, $r15, $r14, $r13, $r12, $rbx
|
|
|
|
; CHECK-LABEL: bb.0.entry:
|
|
|
|
;; PART ONE: For this first block of tests, check that information about
|
|
;; the size of the value on the stack makes it through to the expression.
|
|
|
|
$al = MOV8ri 0, debug-instr-number 1, debug-location !7
|
|
DBG_INSTR_REF 1, 0, !8, !DIExpression(DW_OP_LLVM_convert, 8, DW_ATE_signed, DW_OP_LLVM_convert, 32, DW_ATE_signed, DW_OP_stack_value), debug-location !7
|
|
; CHECK: DBG_VALUE $al, $noreg, ![[VARNUM]],
|
|
; CHECK-SAME: !DIExpression(DW_OP_LLVM_convert, 8, DW_ATE_signed,
|
|
; CHECK-SAME : DW_OP_LLVM_convert, 32, DW_ATE_signed, DW_OP_stack_value)
|
|
|
|
MOV8mr $rsp, 1, $noreg, -8, $noreg, renamable $al :: (store 1 into %stack.0)
|
|
;; Clobber to force variable location onto stack. We should use a
|
|
;; deref_size 1 because the value is smaller than the variable.
|
|
$al = MOV8ri 0, debug-location !7
|
|
; CHECK: DBG_VALUE $rsp, $noreg, ![[VARNUM]],
|
|
; CHECK-SAME: !DIExpression(DW_OP_constu, 8, DW_OP_minus,
|
|
; CHECK-SAME: DW_OP_deref_size, 1, DW_OP_LLVM_convert, 8, DW_ATE_signed,
|
|
; CHECK-SAME: DW_OP_LLVM_convert, 32, DW_ATE_signed, DW_OP_stack_value),
|
|
|
|
; Terminate the current variable location,
|
|
DBG_VALUE $noreg, $noreg, !8, !DIExpression(), debug-location !7
|
|
; CHECK: DBG_VALUE $noreg, $noreg, ![[VARNUM]], !DIExpression()
|
|
|
|
;; Try again, but with the value originating on the stack, to ensure that
|
|
;; we can find its size. It should be deref_size 1 again.
|
|
INC8m $rsp, 1, $noreg, 4, $noreg, implicit-def dead $eflags, debug-instr-number 2, debug-location !7 :: (store (s8) into %stack.0)
|
|
DBG_INSTR_REF 2, 1000000, !8, !DIExpression(DW_OP_LLVM_convert, 8, DW_ATE_signed, DW_OP_LLVM_convert, 32, DW_ATE_signed, DW_OP_stack_value), debug-location !7
|
|
; CHECK: DBG_VALUE $rsp, $noreg, ![[VARNUM]],
|
|
; CHECK-SAME: !DIExpression(DW_OP_constu, 8, DW_OP_minus,
|
|
; CHECK-SAME: DW_OP_deref_size, 1, DW_OP_LLVM_convert, 8, DW_ATE_signed,
|
|
; CHECK-SAME: DW_OP_LLVM_convert, 32, DW_ATE_signed, DW_OP_stack_value),
|
|
|
|
$eax = MOV32ri 0, debug-location !7
|
|
|
|
;; How about DBG_PHIs? The size of the value is communicated by the register
|
|
;; size, or an extra DBG_PHI operand, and that should feed through into the
|
|
;; decision of whether to deref_size or not.
|
|
|
|
DBG_VALUE $noreg, $noreg, !8, !DIExpression(), debug-location !7
|
|
; CHECK: DBG_VALUE $noreg
|
|
|
|
$al = MOV8ri 0, debug-location !7
|
|
DBG_PHI $al, 7
|
|
|
|
MOV32mr $rsp, 1, $noreg, -8, $noreg, renamable $eax :: (store 4 into %stack.0)
|
|
$eax = MOV32ri 0, debug-location !7
|
|
DBG_INSTR_REF 7, 0, !8, !DIExpression(), debug-location !7
|
|
; CHECK: DBG_VALUE $rsp, $noreg, ![[VARNUM]],
|
|
; CHECK-SAME: !DIExpression(DW_OP_constu, 8, DW_OP_minus, DW_OP_deref_size, 1, DW_OP_stack_value)
|
|
|
|
$eax = MOV32ri 0, debug-location !7
|
|
|
|
;; And for when the DBG_PHI specifies a stack size...
|
|
DBG_PHI %stack.0, 8, 16
|
|
DBG_INSTR_REF 8, 0, !8, !DIExpression(), debug-location !7
|
|
; CHECK: DBG_VALUE $rsp, $noreg, ![[VARNUM]],
|
|
; CHECK-SAME: !DIExpression(DW_OP_constu, 8, DW_OP_minus, DW_OP_deref_size, 2, DW_OP_stack_value)
|
|
|
|
$eax = MOV32ri 0, debug-location !7
|
|
DBG_VALUE $noreg, $noreg, !8, !DIExpression(), debug-location !7
|
|
; CHECK: DBG_VALUE $noreg, $noreg
|
|
DBG_VALUE $noreg, $noreg, !10, !DIExpression(DW_OP_LLVM_fragment, 0, 32), debug-location !7
|
|
; CHECK: DBG_VALUE $noreg, $noreg
|
|
|
|
;; PART TWO: test the twelve kinds of location expression mentioned in the
|
|
;; opening comment of this test, in that order. Please update the opening
|
|
;; comment, these lines and the DWARF check lines at the same time.
|
|
;; In each test we'll state a location, give it an instruction to cover,
|
|
;; and then terminate it.
|
|
|
|
;; Scalar (32), Large value (64), no stack value,
|
|
$rax = MOV64ri 0, debug-instr-number 10, debug-location !7
|
|
MOV64mr $rsp, 1, $noreg, -8, $noreg, renamable $rax :: (store 8 into %stack.0)
|
|
$rax = MOV64ri 0, debug-location !7
|
|
DBG_INSTR_REF 10, 0, !8, !DIExpression(), debug-location !7
|
|
; CHECK: DBG_VALUE $rsp, $noreg, ![[VARNUM]],
|
|
; CHECK-SAME: !DIExpression(DW_OP_constu, 8, DW_OP_minus, DW_OP_deref_size, 8, DW_OP_stack_value),
|
|
$eax = MOV32ri 0, debug-location !7
|
|
DBG_VALUE $noreg, $noreg, !8, !DIExpression(), debug-location !7
|
|
; CHECK: DBG_VALUE $noreg, $noreg
|
|
|
|
;; Scalar (32), Same value size (32), no stack value,
|
|
$eax = MOV32ri 0, debug-instr-number 11, debug-location !7
|
|
MOV32mr $rsp, 1, $noreg, -8, $noreg, renamable $eax :: (store 4 into %stack.0)
|
|
$rax = MOV64ri 0, debug-location !7
|
|
DBG_INSTR_REF 11, 0, !8, !DIExpression(), debug-location !7
|
|
; CHECK: DBG_VALUE $rsp, 0, ![[VARNUM]],
|
|
; CHECK-SAME: !DIExpression(DW_OP_constu, 8, DW_OP_minus),
|
|
$eax = MOV32ri 0, debug-location !7
|
|
DBG_VALUE $noreg, $noreg, !8, !DIExpression(), debug-location !7
|
|
; CHECK: DBG_VALUE $noreg, $noreg
|
|
|
|
;; Scalar (32), Smaller value (8), no stack value,
|
|
$al = MOV8ri 0, debug-instr-number 12, debug-location !7
|
|
MOV8mr $rsp, 1, $noreg, -8, $noreg, renamable $al :: (store 1 into %stack.0)
|
|
$rax = MOV64ri 0, debug-location !7
|
|
DBG_INSTR_REF 12, 0, !8, !DIExpression(), debug-location !7
|
|
; CHECK: DBG_VALUE $rsp, $noreg, ![[VARNUM]],
|
|
; CHECK-SAME: !DIExpression(DW_OP_constu, 8, DW_OP_minus, DW_OP_deref_size, 1, DW_OP_stack_value),
|
|
$eax = MOV32ri 0, debug-location !7
|
|
DBG_VALUE $noreg, $noreg, !8, !DIExpression(), debug-location !7
|
|
; CHECK: DBG_VALUE $noreg, $noreg
|
|
|
|
;; Fragment (32), Larger value (64), no stack value,
|
|
$rax = MOV64ri 0, debug-instr-number 13, debug-location !7
|
|
MOV64mr $rsp, 1, $noreg, -8, $noreg, renamable $rax :: (store 8 into %stack.0)
|
|
$rax = MOV64ri 0, debug-location !7
|
|
DBG_INSTR_REF 13, 0, !10, !DIExpression(DW_OP_LLVM_fragment, 0, 32), debug-location !7
|
|
; CHECK: DBG_VALUE $rsp, $noreg, ![[VARNUM2]],
|
|
; CHECK-SAME: !DIExpression(DW_OP_constu, 8, DW_OP_minus, DW_OP_deref_size, 8, DW_OP_stack_value, DW_OP_LLVM_fragment, 0, 32),
|
|
$eax = MOV32ri 0, debug-location !7
|
|
DBG_VALUE $noreg, $noreg, !10, !DIExpression(DW_OP_LLVM_fragment, 0, 32), debug-location !7
|
|
; CHECK: DBG_VALUE $noreg, $noreg
|
|
|
|
;; Fragment (32), Same value size (32), no stack value,
|
|
$eax = MOV32ri 0, debug-instr-number 14, debug-location !7
|
|
MOV32mr $rsp, 1, $noreg, -8, $noreg, renamable $eax :: (store 4 into %stack.0)
|
|
$rax = MOV64ri 0, debug-location !7
|
|
DBG_INSTR_REF 14, 0, !10, !DIExpression(DW_OP_LLVM_fragment, 0, 32), debug-location !7
|
|
; CHECK: DBG_VALUE $rsp, 0, ![[VARNUM2]],
|
|
; CHECK-SAME: !DIExpression(DW_OP_constu, 8, DW_OP_minus, DW_OP_LLVM_fragment, 0, 32),
|
|
$eax = MOV32ri 0, debug-location !7
|
|
DBG_VALUE $noreg, $noreg, !10, !DIExpression(DW_OP_LLVM_fragment, 0, 32), debug-location !7
|
|
; CHECK: DBG_VALUE $noreg, $noreg
|
|
|
|
;; Fragment (32), Smaller value (8), no stack value,
|
|
$al = MOV8ri 0, debug-instr-number 15, debug-location !7
|
|
MOV8mr $rsp, 1, $noreg, -8, $noreg, renamable $al :: (store 1 into %stack.0)
|
|
$rax = MOV64ri 0, debug-location !7
|
|
DBG_INSTR_REF 15, 0, !10, !DIExpression(DW_OP_LLVM_fragment, 0, 32), debug-location !7
|
|
; CHECK: DBG_VALUE $rsp, $noreg, ![[VARNUM2]],
|
|
; CHECK-SAME: !DIExpression(DW_OP_constu, 8, DW_OP_minus, DW_OP_deref_size, 1, DW_OP_stack_value, DW_OP_LLVM_fragment, 0, 32),
|
|
$eax = MOV32ri 0, debug-location !7
|
|
DBG_VALUE $noreg, $noreg, !10, !DIExpression(DW_OP_LLVM_fragment, 0, 32), debug-location !7
|
|
; CHECK: DBG_VALUE $noreg, $noreg
|
|
|
|
|
|
|
|
;; Scalar (32), Large value (64), with stack value,
|
|
$rax = MOV64ri 0, debug-instr-number 16, debug-location !7
|
|
MOV64mr $rsp, 1, $noreg, -8, $noreg, renamable $rax :: (store 8 into %stack.0)
|
|
$rax = MOV64ri 0, debug-location !7
|
|
DBG_INSTR_REF 16, 0, !8, !DIExpression(DW_OP_constu, 1, DW_OP_plus, DW_OP_stack_value), debug-location !7
|
|
; CHECK: DBG_VALUE $rsp, $noreg, ![[VARNUM]],
|
|
; CHECK-SAME: !DIExpression(DW_OP_constu, 8, DW_OP_minus, DW_OP_deref_size, 8, DW_OP_constu, 1, DW_OP_plus, DW_OP_stack_value),
|
|
$eax = MOV32ri 0, debug-location !7
|
|
DBG_VALUE $noreg, $noreg, !8, !DIExpression(), debug-location !7
|
|
; CHECK: DBG_VALUE $noreg, $noreg
|
|
|
|
;; Scalar (32), Same value size (32), no stack value,
|
|
$eax = MOV32ri 0, debug-instr-number 17, debug-location !7
|
|
MOV32mr $rsp, 1, $noreg, -8, $noreg, renamable $eax :: (store 4 into %stack.0)
|
|
$rax = MOV64ri 0, debug-location !7
|
|
DBG_INSTR_REF 17, 0, !8, !DIExpression(DW_OP_constu, 1, DW_OP_plus, DW_OP_stack_value), debug-location !7
|
|
; CHECK: DBG_VALUE $rsp, $noreg, ![[VARNUM]],
|
|
; CHECK-SAME: !DIExpression(DW_OP_constu, 8, DW_OP_minus, DW_OP_deref, DW_OP_constu, 1, DW_OP_plus, DW_OP_stack_value),
|
|
$eax = MOV32ri 0, debug-location !7
|
|
DBG_VALUE $noreg, $noreg, !8, !DIExpression(), debug-location !7
|
|
; CHECK: DBG_VALUE $noreg, $noreg
|
|
|
|
;; Scalar (32), Smaller value (8), no stack value,
|
|
$al = MOV8ri 0, debug-instr-number 18, debug-location !7
|
|
MOV8mr $rsp, 1, $noreg, -8, $noreg, renamable $al :: (store 1 into %stack.0)
|
|
$rax = MOV64ri 0, debug-location !7
|
|
DBG_INSTR_REF 18, 0, !8, !DIExpression(DW_OP_constu, 1, DW_OP_plus, DW_OP_stack_value), debug-location !7
|
|
; CHECK: DBG_VALUE $rsp, $noreg, ![[VARNUM]],
|
|
; CHECK-SAME: !DIExpression(DW_OP_constu, 8, DW_OP_minus, DW_OP_deref_size, 1, DW_OP_constu, 1, DW_OP_plus, DW_OP_stack_value),
|
|
$eax = MOV32ri 0, debug-location !7
|
|
DBG_VALUE $noreg, $noreg, !8, !DIExpression(), debug-location !7
|
|
; CHECK: DBG_VALUE $noreg, $noreg
|
|
|
|
;; Fragment (32), Larger value (64), no stack value,
|
|
$rax = MOV64ri 0, debug-instr-number 19, debug-location !7
|
|
MOV64mr $rsp, 1, $noreg, -8, $noreg, renamable $rax :: (store 8 into %stack.0)
|
|
$rax = MOV64ri 0, debug-location !7
|
|
DBG_INSTR_REF 19, 0, !10, !DIExpression(DW_OP_constu, 1, DW_OP_plus, DW_OP_stack_value, DW_OP_LLVM_fragment, 0, 32), debug-location !7
|
|
; CHECK: DBG_VALUE $rsp, $noreg, ![[VARNUM2]],
|
|
; CHECK-SAME: !DIExpression(DW_OP_constu, 8, DW_OP_minus, DW_OP_deref_size, 8, DW_OP_constu, 1, DW_OP_plus, DW_OP_stack_value, DW_OP_LLVM_fragment, 0, 32),
|
|
$eax = MOV32ri 0, debug-location !7
|
|
DBG_VALUE $noreg, $noreg, !10, !DIExpression(DW_OP_LLVM_fragment, 0, 32), debug-location !7
|
|
; CHECK: DBG_VALUE $noreg, $noreg
|
|
|
|
;; Fragment (32), Same value size (32), no stack value,
|
|
$eax = MOV32ri 0, debug-instr-number 20, debug-location !7
|
|
MOV32mr $rsp, 1, $noreg, -8, $noreg, renamable $eax :: (store 4 into %stack.0)
|
|
$rax = MOV64ri 0, debug-location !7
|
|
DBG_INSTR_REF 20, 0, !10, !DIExpression(DW_OP_constu, 1, DW_OP_plus, DW_OP_stack_value, DW_OP_LLVM_fragment, 0, 32), debug-location !7
|
|
; CHECK: DBG_VALUE $rsp, $noreg, ![[VARNUM2]],
|
|
; CHECK-SAME: !DIExpression(DW_OP_constu, 8, DW_OP_minus, DW_OP_deref_size, 4, DW_OP_constu, 1, DW_OP_plus, DW_OP_stack_value, DW_OP_LLVM_fragment, 0, 32),
|
|
$eax = MOV32ri 0, debug-location !7
|
|
DBG_VALUE $noreg, $noreg, !10, !DIExpression(DW_OP_LLVM_fragment, 0, 32), debug-location !7
|
|
; CHECK: DBG_VALUE $noreg, $noreg
|
|
|
|
;; Fragment (32), Smaller value (8), no stack value,
|
|
$al = MOV8ri 0, debug-instr-number 21, debug-location !7
|
|
MOV8mr $rsp, 1, $noreg, -8, $noreg, renamable $al :: (store 1 into %stack.0)
|
|
$rax = MOV64ri 0, debug-location !7
|
|
DBG_INSTR_REF 21, 0, !10, !DIExpression(DW_OP_constu, 1, DW_OP_plus, DW_OP_stack_value, DW_OP_LLVM_fragment, 0, 32), debug-location !7
|
|
; CHECK: DBG_VALUE $rsp, $noreg, ![[VARNUM2]],
|
|
; CHECK-SAME: !DIExpression(DW_OP_constu, 8, DW_OP_minus, DW_OP_deref_size, 1, DW_OP_constu, 1, DW_OP_plus, DW_OP_stack_value, DW_OP_LLVM_fragment, 0, 32),
|
|
$eax = MOV32ri 0, debug-location !7
|
|
DBG_VALUE $noreg, $noreg, !10, !DIExpression(DW_OP_LLVM_fragment, 0, 32), debug-location !7
|
|
; CHECK: DBG_VALUE $noreg, $noreg
|
|
|
|
RET64 0, debug-location !7
|
|
...
|