mirror of https://github.com/RT-Thread/rt-thread
update README.md and main.c file
update template.uvprojx and enable to automatic operate after burning support SPI/I2C/timer/pwm/ADC/RTC/WDG/FLASH/OTGFS/RNG/UDID on-chip peripheral driver take CubeMX_Config.ioc Rename to STM32F413ZH.ioc
This commit is contained in:
XYX12306
parent
ee2cec13b1
commit
29a0dde714
|
|
@ -130,7 +130,7 @@ CONFIG_RT_USING_PIN=y
|
||||||
# CONFIG_RT_USING_RTC is not set
|
# CONFIG_RT_USING_RTC is not set
|
||||||
# CONFIG_RT_USING_SDIO is not set
|
# CONFIG_RT_USING_SDIO is not set
|
||||||
# CONFIG_RT_USING_SPI is not set
|
# CONFIG_RT_USING_SPI is not set
|
||||||
# CONFIG_RT_USING_WDT is not set
|
CONFIG_RT_USING_WDT=y
|
||||||
# CONFIG_RT_USING_AUDIO is not set
|
# CONFIG_RT_USING_AUDIO is not set
|
||||||
# CONFIG_RT_USING_SENSOR is not set
|
# CONFIG_RT_USING_SENSOR is not set
|
||||||
# CONFIG_RT_USING_TOUCH is not set
|
# CONFIG_RT_USING_TOUCH is not set
|
||||||
|
|
@ -366,6 +366,13 @@ CONFIG_BSP_USING_UART=y
|
||||||
# CONFIG_BSP_USING_UART2 is not set
|
# CONFIG_BSP_USING_UART2 is not set
|
||||||
CONFIG_BSP_USING_UART3=y
|
CONFIG_BSP_USING_UART3=y
|
||||||
# CONFIG_BSP_UART3_RX_USING_DMA is not set
|
# CONFIG_BSP_UART3_RX_USING_DMA is not set
|
||||||
|
# CONFIG_BSP_USING_SPI is not set
|
||||||
|
# CONFIG_BSP_USING_I2C1 is not set
|
||||||
|
# CONFIG_BSP_USING_TIM is not set
|
||||||
|
# CONFIG_BSP_USING_PWM is not set
|
||||||
|
# CONFIG_BSP_USING_ADC is not set
|
||||||
|
# CONFIG_BSP_USING_ONCHIP_RTC is not set
|
||||||
|
# CONFIG_BSP_USING_WDT is not set
|
||||||
# CONFIG_BSP_USING_ON_CHIP_FLASH is not set
|
# CONFIG_BSP_USING_ON_CHIP_FLASH is not set
|
||||||
# CONFIG_BSP_USING_USBD is not set
|
# CONFIG_BSP_USING_USBD is not set
|
||||||
# CONFIG_BSP_USING_RNG is not set
|
# CONFIG_BSP_USING_RNG is not set
|
||||||
|
|
|
||||||
|
|
@ -24,7 +24,7 @@
|
||||||
|
|
||||||
- MCU：STM32F413ZH，主频 100MHz，1536KB FLASH ，320KB RAM
|
- MCU：STM32F413ZH，主频 100MHz，1536KB FLASH ，320KB RAM
|
||||||
- 常用外设
|
- 常用外设
|
||||||
- LED：8个，user LED (绿色，PC9，LD1；蓝色，PB7，LD2；红色，PB14，LD3), USB communication (LD4), over current (LD5), power LED (黄色，LD6), USB FAULT (LD7), VBUS (LD8)。
|
- LED：8个，user LED [SB2跳帽需连接](黄色，PB0，LD1；蓝色，PB7，LD2；红色，PB14，LD3), USB communication (LD4), over current (LD5), power LED (黄色，LD6), USB FAULT (LD7), VBUS (LD8)。
|
||||||
- 按键：2个，B1（USER，PC13），B2（RESET）
|
- 按键：2个，B1（USER，PC13），B2（RESET）
|
||||||
- 常用接口：USB 支持 3 种不同接口：虚拟 COM 端口、大容量存储和调试端口等。
|
- 常用接口：USB 支持 3 种不同接口：虚拟 COM 端口、大容量存储和调试端口等。
|
||||||
- 调试接口，板载 ST-LINK/V2-1 调试器。
|
- 调试接口，板载 ST-LINK/V2-1 调试器。
|
||||||
|
|
@ -35,12 +35,27 @@
|
||||||
|
|
||||||
本 BSP 目前对外设的支持情况如下：
|
本 BSP 目前对外设的支持情况如下：
|
||||||
|
|
||||||
|
| **板载外设** | **支持情况** | **备注** |
|
||||||
|
| :------------ | :----------: | :-----------------------------------: |
|
||||||
|
|STLINK TO USART| 支持 | UART3 |
|
||||||
|
|
||||||
| **片上外设** | **支持情况** | **备注** |
|
| **片上外设** | **支持情况** | **备注** |
|
||||||
| :------------ | :----------: | :-----------------------------------: |
|
| :------------ | :----------: | :-----------------------------------: |
|
||||||
| GPIO | 支持 | |
|
| GPIO | 支持 | |
|
||||||
| UART | 支持 | UART2,UART3 |
|
| UART | 支持 | UART2/3 |
|
||||||
| Onchip Flash | 支持 | |
|
| SPI | 支持 | SPI2 |
|
||||||
| USB Device | 支持 | |
|
| I2C | 支持 | I2C1(软件模拟) |
|
||||||
|
| TIMER | 支持 | TIM11/13/14 |
|
||||||
|
| PWM | 支持 | PWM2_CH4 |
|
||||||
|
| ADC | 支持 | ADC1_IN5 |
|
||||||
|
| RTC | 支持 | 支持外部晶振和内部低速时钟 |
|
||||||
|
| WDT | 支持 | 独立看门狗 |
|
||||||
|
| Onchip Flash | 支持 | 片上Flash |
|
||||||
|
| USB OTG_FS | 支持 | OTGFS as USB device |
|
||||||
|
| Onchip Flash | 支持 | 片上Flash |
|
||||||
|
| USB Device | 支持 | OTGFS as USB device |
|
||||||
|
| RNG | 支持 | Random Number Generator |
|
||||||
|
| UDID | 支持 | Unique Device Identifier |
|
||||||
|
|
||||||
## 使用说明
|
## 使用说明
|
||||||
|
|
||||||
|
|
@ -67,11 +82,11 @@
|
||||||
|
|
||||||
双击 project.uvprojx 文件，打开 MDK5 工程，编译并下载程序到开发板。
|
双击 project.uvprojx 文件，打开 MDK5 工程，编译并下载程序到开发板。
|
||||||
|
|
||||||
> 工程默认配置使用 xxx 仿真器下载程序，在通过 xxx 连接开发板的基础上，点击下载按钮即可下载程序到开发板
|
> 工程默认配置使用 板载ST-LINK 仿真器下载程序，在通过 Micro USB线 连接开发板的基础上，点击下载按钮即可下载程序到开发板
|
||||||
|
|
||||||
#### 运行结果
|
#### 运行结果
|
||||||
|
|
||||||
下载程序成功之后，系统会自动运行，观察开发板上 LD2 的运行效果，蓝色 LD2 会周期性闪烁。
|
下载程序成功之后，系统会自动运行，在SB2跳帽连接时，当按下用户按键USER KEY时，观察开发板上 LD1、LD2、LD2 的运行效果，三个LED会顺序周期性交替闪烁。
|
||||||
|
|
||||||
连接开发板对应串口到 PC , 在终端工具里打开相应的串口（115200-8-1-N），复位设备后，可以看到 RT-Thread 的输出信息:
|
连接开发板对应串口到 PC , 在终端工具里打开相应的串口（115200-8-1-N），复位设备后，可以看到 RT-Thread 的输出信息:
|
||||||
|
|
||||||
|
|
@ -84,7 +99,7 @@ msh >
|
||||||
```
|
```
|
||||||
### 进阶使用
|
### 进阶使用
|
||||||
|
|
||||||
此 BSP 默认只开启了 GPIO 和 串口 3 的功能，更多高级功能需要利用 ENV 工具对 BSP 进行配置，步骤如下：
|
此 BSP 默认只开启了 GPIO 和 UART3 的功能，更多高级功能需要利用 ENV 工具对 BSP 进行配置，步骤如下：
|
||||||
|
|
||||||
1. 在 bsp 下打开 env 工具。
|
1. 在 bsp 下打开 env 工具。
|
||||||
|
|
||||||
|
|
|
||||||
|
|
@ -12,21 +12,50 @@
|
||||||
#include <rtdevice.h>
|
#include <rtdevice.h>
|
||||||
#include <board.h>
|
#include <board.h>
|
||||||
|
|
||||||
|
/* defined the LED1 pin: PB0 */
|
||||||
|
#define LED1_PIN GET_PIN(B, 0)
|
||||||
/* defined the LED2 pin: PB7 */
|
/* defined the LED2 pin: PB7 */
|
||||||
#define LED2_PIN GET_PIN(B, 7)
|
#define LED2_PIN GET_PIN(B, 7)
|
||||||
|
/* defined the LED3 pin: PB14 */
|
||||||
|
#define LED3_PIN GET_PIN(B, 14)
|
||||||
|
/* defined the USER KEY pin: PC13 */
|
||||||
|
#define KEY_PIN GET_PIN(C, 13)
|
||||||
|
|
||||||
int main(void)
|
int main(void)
|
||||||
{
|
{
|
||||||
int count = 1;
|
int count = 1;
|
||||||
/* set LED0 pin mode to output */
|
/* set LED1 pin mode to output */
|
||||||
|
rt_pin_mode(LED1_PIN, PIN_MODE_OUTPUT);
|
||||||
|
/* set LED2 pin mode to output */
|
||||||
rt_pin_mode(LED2_PIN, PIN_MODE_OUTPUT);
|
rt_pin_mode(LED2_PIN, PIN_MODE_OUTPUT);
|
||||||
|
/* set LED3 pin mode to output */
|
||||||
|
rt_pin_mode(LED3_PIN, PIN_MODE_OUTPUT);
|
||||||
|
/* set USER KEY pin mode to input */
|
||||||
|
rt_pin_mode(KEY_PIN, PIN_MODE_INPUT_PULLDOWN);
|
||||||
|
|
||||||
while (count++)
|
while (count++)
|
||||||
{
|
{
|
||||||
rt_pin_write(LED2_PIN, PIN_HIGH);
|
if(rt_pin_read(KEY_PIN))
|
||||||
rt_thread_mdelay(500);
|
{
|
||||||
rt_pin_write(LED2_PIN, PIN_LOW);
|
rt_pin_write(LED1_PIN, PIN_HIGH);
|
||||||
rt_thread_mdelay(500);
|
rt_pin_write(LED2_PIN, PIN_LOW);
|
||||||
|
rt_pin_write(LED3_PIN, PIN_LOW);
|
||||||
|
rt_thread_mdelay(500);
|
||||||
|
rt_pin_write(LED1_PIN, PIN_LOW);
|
||||||
|
rt_pin_write(LED2_PIN, PIN_HIGH);
|
||||||
|
rt_pin_write(LED3_PIN, PIN_LOW);
|
||||||
|
rt_thread_mdelay(500);
|
||||||
|
rt_pin_write(LED1_PIN, PIN_LOW);
|
||||||
|
rt_pin_write(LED2_PIN, PIN_LOW);
|
||||||
|
rt_pin_write(LED3_PIN, PIN_HIGH);
|
||||||
|
rt_thread_mdelay(500);
|
||||||
|
}
|
||||||
|
else
|
||||||
|
{
|
||||||
|
rt_pin_write(LED1_PIN, PIN_LOW);
|
||||||
|
rt_pin_write(LED2_PIN, PIN_LOW);
|
||||||
|
rt_pin_write(LED3_PIN, PIN_LOW);
|
||||||
|
}
|
||||||
}
|
}
|
||||||
|
|
||||||
return RT_EOK;
|
return RT_EOK;
|
||||||
|
|
|
||||||
File diff suppressed because one or more lines are too long
|
|
@ -70,6 +70,8 @@ extern "C" {
|
||||||
|
|
||||||
/* USER CODE END EM */
|
/* USER CODE END EM */
|
||||||
|
|
||||||
|
void HAL_TIM_MspPostInit(TIM_HandleTypeDef *htim);
|
||||||
|
|
||||||
/* Exported functions prototypes ---------------------------------------------*/
|
/* Exported functions prototypes ---------------------------------------------*/
|
||||||
void Error_Handler(void);
|
void Error_Handler(void);
|
||||||
|
|
||||||
|
|
|
||||||
|
|
@ -49,7 +49,7 @@
|
||||||
*/
|
*/
|
||||||
#define HAL_MODULE_ENABLED
|
#define HAL_MODULE_ENABLED
|
||||||
|
|
||||||
/* #define HAL_ADC_MODULE_ENABLED */
|
#define HAL_ADC_MODULE_ENABLED
|
||||||
/* #define HAL_CRYP_MODULE_ENABLED */
|
/* #define HAL_CRYP_MODULE_ENABLED */
|
||||||
/* #define HAL_CAN_MODULE_ENABLED */
|
/* #define HAL_CAN_MODULE_ENABLED */
|
||||||
/* #define HAL_CRC_MODULE_ENABLED */
|
/* #define HAL_CRC_MODULE_ENABLED */
|
||||||
|
|
@ -64,17 +64,17 @@
|
||||||
/* #define HAL_SRAM_MODULE_ENABLED */
|
/* #define HAL_SRAM_MODULE_ENABLED */
|
||||||
/* #define HAL_SDRAM_MODULE_ENABLED */
|
/* #define HAL_SDRAM_MODULE_ENABLED */
|
||||||
/* #define HAL_HASH_MODULE_ENABLED */
|
/* #define HAL_HASH_MODULE_ENABLED */
|
||||||
/* #define HAL_I2C_MODULE_ENABLED */
|
#define HAL_I2C_MODULE_ENABLED
|
||||||
/* #define HAL_I2S_MODULE_ENABLED */
|
/* #define HAL_I2S_MODULE_ENABLED */
|
||||||
/* #define HAL_IWDG_MODULE_ENABLED */
|
#define HAL_IWDG_MODULE_ENABLED
|
||||||
/* #define HAL_LTDC_MODULE_ENABLED */
|
/* #define HAL_LTDC_MODULE_ENABLED */
|
||||||
/* #define HAL_RNG_MODULE_ENABLED */
|
/* #define HAL_RNG_MODULE_ENABLED */
|
||||||
/* #define HAL_RTC_MODULE_ENABLED */
|
#define HAL_RTC_MODULE_ENABLED
|
||||||
/* #define HAL_SAI_MODULE_ENABLED */
|
/* #define HAL_SAI_MODULE_ENABLED */
|
||||||
/* #define HAL_SD_MODULE_ENABLED */
|
/* #define HAL_SD_MODULE_ENABLED */
|
||||||
/* #define HAL_MMC_MODULE_ENABLED */
|
/* #define HAL_MMC_MODULE_ENABLED */
|
||||||
/* #define HAL_SPI_MODULE_ENABLED */
|
#define HAL_SPI_MODULE_ENABLED
|
||||||
/* #define HAL_TIM_MODULE_ENABLED */
|
#define HAL_TIM_MODULE_ENABLED
|
||||||
#define HAL_UART_MODULE_ENABLED
|
#define HAL_UART_MODULE_ENABLED
|
||||||
/* #define HAL_USART_MODULE_ENABLED */
|
/* #define HAL_USART_MODULE_ENABLED */
|
||||||
/* #define HAL_IRDA_MODULE_ENABLED */
|
/* #define HAL_IRDA_MODULE_ENABLED */
|
||||||
|
|
|
||||||
|
|
@ -1,261 +1,326 @@
|
||||||
#MicroXplorer Configuration settings - do not modify
|
#MicroXplorer Configuration settings - do not modify
|
||||||
File.Version=6
|
|
||||||
KeepUserPlacement=true
|
|
||||||
Mcu.Family=STM32F4
|
Mcu.Family=STM32F4
|
||||||
Mcu.IP0=NVIC
|
PC3.Mode=Full_Duplex_Master
|
||||||
Mcu.IP1=RCC
|
ProjectManager.MainLocation=Src
|
||||||
Mcu.IP2=SYS
|
RCC.MCOFreq_Value=72000000
|
||||||
Mcu.IP3=USART3
|
RCC.USART1Freq_Value=72000000
|
||||||
Mcu.IP4=USB_OTG_FS
|
USART2.IPParameters=VirtualMode
|
||||||
Mcu.IPNb=5
|
RCC.CortexFreq_Value=96000000
|
||||||
Mcu.Name=STM32F413Z(G-H)Tx
|
RCC.TIM17Freq_Value=72000000
|
||||||
Mcu.Package=LQFP144
|
PG6.Signal=GPIO_Output
|
||||||
|
ProjectManager.KeepUserCode=true
|
||||||
|
Mcu.UserName=STM32F413ZHTx
|
||||||
|
PD9.GPIOParameters=GPIO_Label
|
||||||
|
SPI2.VirtualType=VM_MASTER
|
||||||
|
PB10.Mode=Full_Duplex_Master
|
||||||
|
PG6.Locked=true
|
||||||
|
RCC.PLLCLKFreq_Value=96000000
|
||||||
|
PB14.GPIO_Label=LD3 [Red]
|
||||||
|
VP_IWDG_VS_IWDG.Mode=IWDG_Activate
|
||||||
|
PG6.GPIO_Label=USB_PowerSwitchOn [STMPS2151STR_EN]
|
||||||
|
PA14.GPIO_Label=TCK
|
||||||
|
RCC.PLLQCLKFreq_Value=48000000
|
||||||
|
RCC.SYSCLKSourceVirtual=RCC_SYSCLKSOURCE_PLLCLK
|
||||||
|
PA12.GPIOParameters=GPIO_Label
|
||||||
|
ProjectManager.functionlistsort=1-MX_GPIO_Init-GPIO-false-HAL-true,2-SystemClock_Config-RCC-false-HAL-false,3-MX_USART3_UART_Init-USART3-false-HAL-true,4-MX_USB_OTG_FS_PCD_Init-USB_OTG_FS-false-HAL-true,5-MX_ADC1_Init-ADC1-false-HAL-true,6-MX_I2C1_Init-I2C1-false-HAL-true,7-MX_IWDG_Init-IWDG-false-HAL-true,8-MX_RTC_Init-RTC-false-HAL-true,9-MX_SPI2_Init-SPI2-false-HAL-true,10-MX_TIM2_Init-TIM2-false-HAL-true,11-MX_TIM11_Init-TIM11-false-HAL-true,12-MX_TIM13_Init-TIM13-false-HAL-true,13-MX_TIM14_Init-TIM14-false-HAL-true,14-MX_USART2_UART_Init-USART2-false-HAL-true
|
||||||
|
PA9.GPIOParameters=GPIO_Label
|
||||||
|
PD8.Locked=true
|
||||||
|
PA11.GPIOParameters=GPIO_Label
|
||||||
|
VP_RTC_VS_RTC_Activate.Mode=RTC_Enabled
|
||||||
|
PA11.Mode=Device_Only
|
||||||
|
RCC.RTCFreq_Value=32000
|
||||||
|
PC9.Locked=true
|
||||||
|
RCC.PLLI2SRCLKFreq_Value=48000000
|
||||||
|
RCC.USART2Freq_Value=36000000
|
||||||
|
PC13.GPIO_Label=USER_Btn [B1]
|
||||||
|
PD9.Mode=Asynchronous
|
||||||
|
PinOutPanel.RotationAngle=0
|
||||||
|
RCC.MCO1PinFreq_Value=16000000
|
||||||
|
RCC.SYSCLKSource=RCC_SYSCLKSOURCE_PLLCLK
|
||||||
|
ProjectManager.StackSize=0x400
|
||||||
|
SH.GPXTI13.0=GPIO_EXTI13
|
||||||
|
RCC.I2C3Freq_Value=8000000
|
||||||
|
Mcu.IP4=RCC
|
||||||
|
RCC.FCLKCortexFreq_Value=96000000
|
||||||
|
Mcu.IP5=RTC
|
||||||
|
Mcu.IP2=IWDG
|
||||||
|
NVIC.SVCall_IRQn=true\:0\:0\:false\:false\:true\:true\:false
|
||||||
|
Mcu.IP3=NVIC
|
||||||
|
Mcu.IP0=ADC1
|
||||||
|
PA12.Locked=true
|
||||||
|
Mcu.IP1=I2C1
|
||||||
|
PA12.Signal=USB_OTG_FS_DP
|
||||||
|
Mcu.UserConstants=
|
||||||
|
PH0\ -\ OSC_IN.Signal=RCC_OSC_IN
|
||||||
|
SH.GPXTI13.ConfNb=1
|
||||||
|
PH0\ -\ OSC_IN.Locked=true
|
||||||
|
Mcu.ThirdPartyNb=0
|
||||||
|
RCC.SDIOFreq_Value=48000000
|
||||||
|
RCC.HCLKFreq_Value=96000000
|
||||||
|
Mcu.IPNb=15
|
||||||
|
RCC.I2SClocksFreq_Value=48000000
|
||||||
|
TIM2.IPParameters=Channel-PWM Generation4 CH4
|
||||||
|
ProjectManager.PreviousToolchain=
|
||||||
|
RCC.APB2TimFreq_Value=96000000
|
||||||
|
PB6.Signal=I2C1_SCL
|
||||||
|
RCC.VcooutputI2S=48000000
|
||||||
|
RCC.SAI1BFreq_Value=8000000
|
||||||
|
RCC.PLLRoutputFreq_Value=192000000
|
||||||
|
PD8.GPIOParameters=GPIO_Label
|
||||||
|
PB6.Mode=I2C
|
||||||
|
PC3.Signal=SPI2_MOSI
|
||||||
|
PA8.GPIOParameters=GPIO_Label
|
||||||
|
Mcu.Pin6=PC3
|
||||||
|
Mcu.Pin7=PA2
|
||||||
|
PD8.Signal=USART3_TX
|
||||||
|
VP_TIM2_VS_ClockSourceINT.Signal=TIM2_VS_ClockSourceINT
|
||||||
|
Mcu.Pin8=PA3
|
||||||
|
Mcu.Pin9=PA5
|
||||||
|
RCC.AHBFreq_Value=96000000
|
||||||
|
RCC.TIM2Freq_Value=72000000
|
||||||
Mcu.Pin0=PC13
|
Mcu.Pin0=PC13
|
||||||
Mcu.Pin1=PC14-OSC32_IN
|
Mcu.Pin1=PC14-OSC32_IN
|
||||||
Mcu.Pin10=PC9
|
|
||||||
Mcu.Pin11=PA8
|
|
||||||
Mcu.Pin12=PA9
|
|
||||||
Mcu.Pin13=PA10
|
|
||||||
Mcu.Pin14=PA11
|
|
||||||
Mcu.Pin15=PA12
|
|
||||||
Mcu.Pin16=PA13
|
|
||||||
Mcu.Pin17=PA14
|
|
||||||
Mcu.Pin18=PB3
|
|
||||||
Mcu.Pin19=PB7
|
|
||||||
Mcu.Pin2=PC15-OSC32_OUT
|
Mcu.Pin2=PC15-OSC32_OUT
|
||||||
Mcu.Pin20=VP_SYS_VS_Systick
|
|
||||||
Mcu.Pin3=PH0 - OSC_IN
|
Mcu.Pin3=PH0 - OSC_IN
|
||||||
|
RCC.USART3Freq_Value=36000000
|
||||||
Mcu.Pin4=PH1 - OSC_OUT
|
Mcu.Pin4=PH1 - OSC_OUT
|
||||||
Mcu.Pin5=PB14
|
Mcu.Pin5=PC2
|
||||||
Mcu.Pin6=PD8
|
ADC1.Channel-0\#ChannelRegularConversion=ADC_CHANNEL_5
|
||||||
Mcu.Pin7=PD9
|
ProjectManager.ProjectBuild=false
|
||||||
Mcu.Pin8=PG6
|
RCC.HSE_VALUE=8000000
|
||||||
Mcu.Pin9=PG7
|
|
||||||
Mcu.PinsNb=21
|
|
||||||
Mcu.ThirdPartyNb=0
|
|
||||||
Mcu.UserConstants=
|
|
||||||
Mcu.UserName=STM32F413ZHTx
|
|
||||||
MxCube.Version=5.1.0
|
|
||||||
MxDb.Version=DB.5.0.10
|
|
||||||
NVIC.BusFault_IRQn=true\:0\:0\:false\:false\:true\:true\:false
|
|
||||||
NVIC.DebugMonitor_IRQn=true\:0\:0\:false\:false\:true\:true\:false
|
|
||||||
NVIC.HardFault_IRQn=true\:0\:0\:false\:false\:true\:true\:false
|
|
||||||
NVIC.MemoryManagement_IRQn=true\:0\:0\:false\:false\:true\:true\:false
|
|
||||||
NVIC.NonMaskableInt_IRQn=true\:0\:0\:false\:false\:true\:true\:false
|
|
||||||
NVIC.PendSV_IRQn=true\:0\:0\:false\:false\:true\:true\:false
|
|
||||||
NVIC.PriorityGroup=NVIC_PRIORITYGROUP_4
|
|
||||||
NVIC.SVCall_IRQn=true\:0\:0\:false\:false\:true\:true\:false
|
|
||||||
NVIC.SysTick_IRQn=true\:0\:0\:false\:false\:true\:true\:true
|
|
||||||
NVIC.UsageFault_IRQn=true\:0\:0\:false\:false\:true\:true\:false
|
NVIC.UsageFault_IRQn=true\:0\:0\:false\:false\:true\:true\:false
|
||||||
PA10.GPIOParameters=GPIO_Label
|
NVIC.DebugMonitor_IRQn=true\:0\:0\:false\:false\:true\:true\:false
|
||||||
PA10.GPIO_Label=USB_ID
|
|
||||||
PA10.Locked=true
|
|
||||||
PA10.Signal=USB_OTG_FS_ID
|
|
||||||
PA11.GPIOParameters=GPIO_Label
|
|
||||||
PA11.GPIO_Label=USB_DM
|
|
||||||
PA11.Locked=true
|
|
||||||
PA11.Mode=Device_Only
|
|
||||||
PA11.Signal=USB_OTG_FS_DM
|
|
||||||
PA12.GPIOParameters=GPIO_Label
|
|
||||||
PA12.GPIO_Label=USB_DP
|
|
||||||
PA12.Locked=true
|
|
||||||
PA12.Mode=Device_Only
|
|
||||||
PA12.Signal=USB_OTG_FS_DP
|
|
||||||
PA13.GPIOParameters=GPIO_Label
|
|
||||||
PA13.GPIO_Label=TMS
|
|
||||||
PA13.Locked=true
|
|
||||||
PA13.Mode=Serial_Wire
|
|
||||||
PA13.Signal=SYS_JTMS-SWDIO
|
|
||||||
PA14.GPIOParameters=GPIO_Label
|
|
||||||
PA14.GPIO_Label=TCK
|
|
||||||
PA14.Locked=true
|
|
||||||
PA14.Mode=Serial_Wire
|
|
||||||
PA14.Signal=SYS_JTCK-SWCLK
|
|
||||||
PA8.GPIOParameters=GPIO_Label
|
|
||||||
PA8.GPIO_Label=USB_SOF [TP1]
|
|
||||||
PA8.Locked=true
|
PA8.Locked=true
|
||||||
PA8.Mode=Activate_SOF_FS
|
Mcu.IP10=TIM13
|
||||||
PA8.Signal=USB_OTG_FS_SOF
|
NVIC.SysTick_IRQn=true\:0\:0\:false\:false\:true\:true\:true
|
||||||
PA9.GPIOParameters=GPIO_Label
|
Mcu.IP12=USART2
|
||||||
PA9.GPIO_Label=USB_VBUS
|
RCC.PLLMUL=RCC_PLL_MUL9
|
||||||
PA9.Locked=true
|
Mcu.IP11=TIM14
|
||||||
PA9.Mode=Activate_VBUS
|
ProjectManager.FirmwarePackage=STM32Cube FW_F4 V1.24.2
|
||||||
PA9.Signal=USB_OTG_FS_VBUS
|
MxDb.Version=DB.5.0.10
|
||||||
PB14.GPIOParameters=GPIO_Label
|
Mcu.IP14=USB_OTG_FS
|
||||||
PB14.GPIO_Label=LD3 [Red]
|
Mcu.IP13=USART3
|
||||||
PB14.Locked=true
|
ProjectManager.BackupPrevious=false
|
||||||
PB14.Signal=GPIO_Output
|
PC14-OSC32_IN.Mode=LSE-External-Oscillator
|
||||||
|
RCC.VCOInputFreq_Value=1000000
|
||||||
|
PA14.Mode=Serial_Wire
|
||||||
|
File.Version=6
|
||||||
|
PA10.GPIO_Label=USB_ID
|
||||||
|
SPI2.CalculateBaudRate=24.0 MBits/s
|
||||||
PB3.GPIOParameters=GPIO_Label
|
PB3.GPIOParameters=GPIO_Label
|
||||||
PB3.GPIO_Label=SWO
|
|
||||||
PB3.Locked=true
|
|
||||||
PB3.Signal=SYS_JTDO-SWO
|
|
||||||
PB7.GPIOParameters=GPIO_Label
|
|
||||||
PB7.GPIO_Label=LD2 [Blue]
|
|
||||||
PB7.Locked=true
|
|
||||||
PB7.Signal=GPIO_Output
|
PB7.Signal=GPIO_Output
|
||||||
PC13.GPIOParameters=GPIO_Label
|
PA8.Signal=USB_OTG_FS_SOF
|
||||||
PC13.GPIO_Label=USER_Btn [B1]
|
RCC.PLLRCLKFreq_Value=192000000
|
||||||
|
NVIC.PendSV_IRQn=true\:0\:0\:false\:false\:true\:true\:false
|
||||||
|
RCC.PLLI2SoutputFreq_Value=48000000
|
||||||
|
ProjectManager.HalAssertFull=false
|
||||||
|
ADC1.SamplingTime-0\#ChannelRegularConversion=ADC_SAMPLETIME_3CYCLES
|
||||||
|
ProjectManager.ProjectName=STM32F413ZH
|
||||||
|
RCC.TIM1Freq_Value=72000000
|
||||||
|
PH0\ -\ OSC_IN.GPIOParameters=GPIO_Label
|
||||||
|
PA13.GPIOParameters=GPIO_Label
|
||||||
|
RCC.PLLMCOFreq_Value=72000000
|
||||||
|
PB7.GPIO_Label=LD2 [Blue]
|
||||||
|
RCC.MCO2PinFreq_Value=96000000
|
||||||
|
Mcu.Package=LQFP144
|
||||||
|
PB9.Signal=I2C1_SDA
|
||||||
|
RCC.TIM15Freq_Value=72000000
|
||||||
|
SPI2.Mode=SPI_MODE_MASTER
|
||||||
|
RCC.I2S2Freq_Value=48000000
|
||||||
|
RCC.SAI1AFreq_Value=8000000
|
||||||
|
RCC.ADC34outputFreq_Value=72000000
|
||||||
|
USART2.VirtualMode=VM_ASYNC
|
||||||
|
PA14.Locked=true
|
||||||
|
ProjectManager.ToolChainLocation=
|
||||||
|
RCC.LSI_VALUE=32000
|
||||||
|
VP_SYS_VS_Systick.Signal=SYS_VS_Systick
|
||||||
|
USART3.IPParameters=VirtualMode
|
||||||
|
PA10.Signal=USB_OTG_FS_ID
|
||||||
|
USB_OTG_FS.VirtualMode=Device_Only
|
||||||
|
VP_TIM11_VS_ClockSourceINT.Signal=TIM11_VS_ClockSourceINT
|
||||||
|
VP_TIM13_VS_ClockSourceINT.Signal=TIM13_VS_ClockSourceINT
|
||||||
|
RCC.DFSDMFreq_Value=96000000
|
||||||
|
PB14.GPIOParameters=GPIO_Label
|
||||||
|
RCC.TIM16Freq_Value=72000000
|
||||||
|
RCC.APB1TimFreq_Value=96000000
|
||||||
|
NVIC.BusFault_IRQn=true\:0\:0\:false\:false\:true\:true\:false
|
||||||
|
SPI2.Direction=SPI_DIRECTION_2LINES
|
||||||
|
RCC.DFSDM2AudioFreq_Value=48000000
|
||||||
|
USB_OTG_FS.IPParameters=VirtualMode
|
||||||
|
VP_TIM14_VS_ClockSourceINT.Mode=Enable_Timer
|
||||||
|
RCC.PLLI2SQoutputFreq_Value=48000000
|
||||||
|
SH.S_TIM2_CH4.ConfNb=1
|
||||||
|
RCC.DFSDMAudioFreq_Value=48000000
|
||||||
|
RCC.LPTimerFreq_Value=48000000
|
||||||
|
PD6.Signal=USART2_RX
|
||||||
|
ProjectManager.CustomerFirmwarePackage=
|
||||||
|
PC14-OSC32_IN.Locked=true
|
||||||
|
PB3.Locked=true
|
||||||
|
PA3.Signal=S_TIM2_CH4
|
||||||
|
PB3.GPIO_Label=SWO
|
||||||
|
VP_RTC_VS_RTC_Activate.Signal=RTC_VS_RTC_Activate
|
||||||
|
PC15-OSC32_OUT.Mode=LSE-External-Oscillator
|
||||||
|
RCC.PLLQoutputFreq_Value=48000000
|
||||||
|
ProjectManager.ProjectFileName=STM32F413ZH.ioc
|
||||||
|
TIM2.Channel-PWM\ Generation4\ CH4=TIM_CHANNEL_4
|
||||||
|
RCC.ADC12outputFreq_Value=72000000
|
||||||
|
PG7.Locked=true
|
||||||
|
ADC1.Rank-0\#ChannelRegularConversion=1
|
||||||
|
PG7.Signal=GPIO_Input
|
||||||
|
PD9.GPIO_Label=STLK_TX [STM32F103CBT6_PA2]
|
||||||
|
Mcu.PinsNb=36
|
||||||
|
VP_TIM14_VS_ClockSourceINT.Signal=TIM14_VS_ClockSourceINT
|
||||||
|
PC9.GPIO_Label=LD1 [Green]
|
||||||
|
ProjectManager.NoMain=false
|
||||||
|
ADC1.IPParameters=Rank-0\#ChannelRegularConversion,master,Channel-0\#ChannelRegularConversion,SamplingTime-0\#ChannelRegularConversion,NbrOfConversionFlag
|
||||||
PC13.Locked=true
|
PC13.Locked=true
|
||||||
PC13.Signal=GPXTI13
|
PC13.Signal=GPXTI13
|
||||||
PC14-OSC32_IN.Locked=true
|
PA9.GPIO_Label=USB_VBUS
|
||||||
PC14-OSC32_IN.Mode=LSE-External-Oscillator
|
|
||||||
PC14-OSC32_IN.Signal=RCC_OSC32_IN
|
|
||||||
PC15-OSC32_OUT.Locked=true
|
|
||||||
PC15-OSC32_OUT.Mode=LSE-External-Oscillator
|
|
||||||
PC15-OSC32_OUT.Signal=RCC_OSC32_OUT
|
|
||||||
PC9.GPIOParameters=GPIO_Label
|
|
||||||
PC9.GPIO_Label=LD1 [Green]
|
|
||||||
PC9.Locked=true
|
|
||||||
PC9.Signal=GPIO_Output
|
|
||||||
PCC.Checker=false
|
|
||||||
PCC.Line=STM32F413/423
|
|
||||||
PCC.MCU=STM32F413Z(G-H)Tx
|
|
||||||
PCC.PartNumber=STM32F413ZHTx
|
|
||||||
PCC.Seq0=0
|
|
||||||
PCC.Series=STM32F4
|
|
||||||
PCC.Temperature=25
|
|
||||||
PCC.Vdd=null
|
|
||||||
PD8.GPIOParameters=GPIO_Label
|
|
||||||
PD8.GPIO_Label=STLK_RX [STM32F103CBT6_PA3]
|
|
||||||
PD8.Locked=true
|
|
||||||
PD8.Mode=Asynchronous
|
|
||||||
PD8.Signal=USART3_TX
|
|
||||||
PD9.GPIOParameters=GPIO_Label
|
|
||||||
PD9.GPIO_Label=STLK_TX [STM32F103CBT6_PA2]
|
|
||||||
PD9.Locked=true
|
|
||||||
PD9.Mode=Asynchronous
|
|
||||||
PD9.Signal=USART3_RX
|
|
||||||
PG6.GPIOParameters=GPIO_Label
|
|
||||||
PG6.GPIO_Label=USB_PowerSwitchOn [STMPS2151STR_EN]
|
|
||||||
PG6.Locked=true
|
|
||||||
PG6.Signal=GPIO_Output
|
|
||||||
PG7.GPIOParameters=GPIO_Label
|
|
||||||
PG7.GPIO_Label=USB_OverCurrent [STMPS2151STR_FAULT]
|
|
||||||
PG7.Locked=true
|
|
||||||
PG7.Signal=GPIO_Input
|
|
||||||
PH0\ -\ OSC_IN.GPIOParameters=GPIO_Label
|
|
||||||
PH0\ -\ OSC_IN.GPIO_Label=MCO
|
|
||||||
PH0\ -\ OSC_IN.Locked=true
|
|
||||||
PH0\ -\ OSC_IN.Mode=HSE-External-Clock-Source
|
|
||||||
PH0\ -\ OSC_IN.Signal=RCC_OSC_IN
|
|
||||||
PH1\ -\ OSC_OUT.Mode=HSE-External-Clock-Source
|
|
||||||
PH1\ -\ OSC_OUT.Signal=RCC_OSC_OUT
|
|
||||||
PinOutPanel.RotationAngle=0
|
|
||||||
ProjectManager.AskForMigrate=true
|
|
||||||
ProjectManager.BackupPrevious=false
|
|
||||||
ProjectManager.CompilerOptimize=6
|
|
||||||
ProjectManager.ComputerToolchain=false
|
|
||||||
ProjectManager.CoupleFile=false
|
|
||||||
ProjectManager.CustomerFirmwarePackage=
|
|
||||||
ProjectManager.DefaultFWLocation=true
|
|
||||||
ProjectManager.DeletePrevious=true
|
|
||||||
ProjectManager.DeviceId=STM32F413ZHTx
|
|
||||||
ProjectManager.FirmwarePackage=STM32Cube FW_F4 V1.24.2
|
|
||||||
ProjectManager.FreePins=false
|
|
||||||
ProjectManager.HalAssertFull=false
|
|
||||||
ProjectManager.HeapSize=0x200
|
|
||||||
ProjectManager.KeepUserCode=true
|
|
||||||
ProjectManager.LastFirmware=true
|
|
||||||
ProjectManager.LibraryCopy=0
|
|
||||||
ProjectManager.MainLocation=Src
|
|
||||||
ProjectManager.NoMain=false
|
|
||||||
ProjectManager.PreviousToolchain=
|
|
||||||
ProjectManager.ProjectBuild=false
|
|
||||||
ProjectManager.ProjectFileName=CubeMX_Config.ioc
|
|
||||||
ProjectManager.ProjectName=CubeMX_Config
|
|
||||||
ProjectManager.StackSize=0x400
|
|
||||||
ProjectManager.TargetToolchain=MDK-ARM V5
|
|
||||||
ProjectManager.ToolChainLocation=
|
|
||||||
ProjectManager.UnderRoot=false
|
|
||||||
ProjectManager.functionlistsort=1-MX_GPIO_Init-GPIO-false-HAL-true,2-SystemClock_Config-RCC-false-HAL-false,3-MX_USART3_UART_Init-USART3-false-HAL-true,4-MX_USB_OTG_FS_PCD_Init-USB_OTG_FS-false-HAL-true
|
|
||||||
RCC.48MHZClocksFreq_Value=24000000
|
|
||||||
RCC.ADC12outputFreq_Value=72000000
|
|
||||||
RCC.ADC34outputFreq_Value=72000000
|
|
||||||
RCC.AHBFreq_Value=96000000
|
|
||||||
RCC.APB1CLKDivider=RCC_HCLK_DIV2
|
|
||||||
RCC.APB1Freq_Value=48000000
|
|
||||||
RCC.APB1TimFreq_Value=96000000
|
|
||||||
RCC.APB2Freq_Value=96000000
|
|
||||||
RCC.APB2TimFreq_Value=96000000
|
|
||||||
RCC.CortexFreq_Value=96000000
|
|
||||||
RCC.DFSDM2AudioFreq_Value=48000000
|
|
||||||
RCC.DFSDMAudioFreq_Value=48000000
|
|
||||||
RCC.DFSDMFreq_Value=96000000
|
|
||||||
RCC.EthernetFreq_Value=8000000
|
|
||||||
RCC.FCLKCortexFreq_Value=96000000
|
|
||||||
RCC.FMPI2C1Freq_Value=48000000
|
RCC.FMPI2C1Freq_Value=48000000
|
||||||
|
RCC.VCOI2SInputFreq_Value=500000
|
||||||
|
PH1\ -\ OSC_OUT.Mode=HSE-External-Clock-Source
|
||||||
|
PC2.Signal=SPI2_MISO
|
||||||
|
PA11.GPIO_Label=USB_DM
|
||||||
|
ProjectManager.DefaultFWLocation=true
|
||||||
|
PC2.Mode=Full_Duplex_Master
|
||||||
|
PD9.Signal=USART3_RX
|
||||||
|
ProjectManager.DeletePrevious=true
|
||||||
|
PB14.Locked=true
|
||||||
|
RCC.APB1CLKDivider=RCC_HCLK_DIV2
|
||||||
|
PC14-OSC32_IN.Signal=RCC_OSC32_IN
|
||||||
|
boardIOC=true
|
||||||
|
PD6.Mode=Asynchronous
|
||||||
|
PA12.GPIO_Label=USB_DP
|
||||||
RCC.FamilyName=M
|
RCC.FamilyName=M
|
||||||
RCC.HCLKFreq_Value=96000000
|
VP_TIM11_VS_ClockSourceINT.Mode=Enable_Timer
|
||||||
RCC.HSE_VALUE=8000000
|
PD8.GPIO_Label=STLK_RX [STM32F103CBT6_PA3]
|
||||||
RCC.HSI_VALUE=16000000
|
RCC.WatchDogFreq_Value=32000
|
||||||
RCC.I2C1Freq_Value=8000000
|
PA13.Signal=SYS_JTMS-SWDIO
|
||||||
RCC.I2C2Freq_Value=8000000
|
PA11.Locked=true
|
||||||
RCC.I2C3Freq_Value=8000000
|
PA9.Mode=Activate_VBUS
|
||||||
|
PH0\ -\ OSC_IN.Mode=HSE-External-Clock-Source
|
||||||
|
PA8.GPIO_Label=USB_SOF [TP1]
|
||||||
|
PC15-OSC32_OUT.Locked=true
|
||||||
|
ProjectManager.TargetToolchain=MDK-ARM V5
|
||||||
|
PB7.GPIOParameters=GPIO_Label
|
||||||
|
PB9.Mode=I2C
|
||||||
|
PA9.Signal=USB_OTG_FS_VBUS
|
||||||
RCC.I2S1Freq_Value=48000000
|
RCC.I2S1Freq_Value=48000000
|
||||||
RCC.I2S2Freq_Value=48000000
|
SPI2.IPParameters=VirtualType,Mode,Direction,CalculateBaudRate
|
||||||
RCC.I2SClocksFreq_Value=48000000
|
RCC.VCOInputMFreq_Value=500000
|
||||||
RCC.IPParameters=48MHZClocksFreq_Value,ADC12outputFreq_Value,ADC34outputFreq_Value,AHBFreq_Value,APB1CLKDivider,APB1Freq_Value,APB1TimFreq_Value,APB2Freq_Value,APB2TimFreq_Value,CortexFreq_Value,DFSDM2AudioFreq_Value,DFSDMAudioFreq_Value,DFSDMFreq_Value,EthernetFreq_Value,FCLKCortexFreq_Value,FMPI2C1Freq_Value,FamilyName,HCLKFreq_Value,HSE_VALUE,HSI_VALUE,I2C1Freq_Value,I2C2Freq_Value,I2C3Freq_Value,I2S1Freq_Value,I2S2Freq_Value,I2SClocksFreq_Value,LPTimerFreq_Value,LSI_VALUE,MCO1PinFreq_Value,MCO2PinFreq_Value,MCOFreq_Value,PLLCLKFreq_Value,PLLI2SPCLKFreq_Value,PLLI2SQCLKFreq_Value,PLLI2SQoutputFreq_Value,PLLI2SRCLKFreq_Value,PLLI2SoutputFreq_Value,PLLM,PLLMCOFreq_Value,PLLMUL,PLLN,PLLP,PLLQ,PLLQCLKFreq_Value,PLLQoutputFreq_Value,PLLRCLKFreq_Value,PLLRoutputFreq_Value,PRESCALERUSB,PWRFreq_Value,RNGFreq_Value,RTCFreq_Value,RTCHSEDivFreq_Value,SAI1AFreq_Value,SAI1BFreq_Value,SDIOFreq_Value,SYSCLKFreq_VALUE,SYSCLKSource,SYSCLKSourceVirtual,TIM15Freq_Value,TIM16Freq_Value,TIM17Freq_Value,TIM1Freq_Value,TIM20Freq_Value,TIM2Freq_Value,TIM3Freq_Value,TIM8Freq_Value,UART4Freq_Value,UART5Freq_Value,USART1Freq_Value,USART2Freq_Value,USART3Freq_Value,USBFreq_Value,VCOI2SInputFreq_Value,VCOI2SOutputFreq_Value,VCOInputFreq_Value,VCOInputMFreq_Value,VCOOutput2Freq_Value,VCOOutputFreq_Value,VcooutputI2S,WatchDogFreq_Value
|
RCC.USBFreq_Value=48000000
|
||||||
RCC.LPTimerFreq_Value=48000000
|
PC15-OSC32_OUT.Signal=RCC_OSC32_OUT
|
||||||
RCC.LSI_VALUE=32000
|
PD8.Mode=Asynchronous
|
||||||
RCC.MCO1PinFreq_Value=16000000
|
PB10.Signal=SPI2_SCK
|
||||||
RCC.MCO2PinFreq_Value=96000000
|
RCC.VCOI2SOutputFreq_Value=96000000
|
||||||
RCC.MCOFreq_Value=72000000
|
PB14.Signal=GPIO_Output
|
||||||
RCC.PLLCLKFreq_Value=96000000
|
PG6.GPIOParameters=GPIO_Label
|
||||||
RCC.PLLI2SPCLKFreq_Value=48000000
|
PA5.Signal=ADCx_IN5
|
||||||
RCC.PLLI2SQCLKFreq_Value=48000000
|
PH1\ -\ OSC_OUT.Signal=RCC_OSC_OUT
|
||||||
RCC.PLLI2SQoutputFreq_Value=48000000
|
board=NUCLEO-F413ZH
|
||||||
RCC.PLLI2SRCLKFreq_Value=48000000
|
RCC.VCOOutputFreq_Value=384000000
|
||||||
RCC.PLLI2SoutputFreq_Value=48000000
|
ProjectManager.LastFirmware=true
|
||||||
RCC.PLLM=8
|
RCC.VCOOutput2Freq_Value=8000000
|
||||||
RCC.PLLMCOFreq_Value=72000000
|
VP_TIM13_VS_ClockSourceINT.Mode=Enable_Timer
|
||||||
RCC.PLLMUL=RCC_PLL_MUL9
|
RCC.APB2Freq_Value=96000000
|
||||||
RCC.PLLN=384
|
|
||||||
RCC.PLLP=RCC_PLLP_DIV4
|
|
||||||
RCC.PLLQ=8
|
|
||||||
RCC.PLLQCLKFreq_Value=48000000
|
|
||||||
RCC.PLLQoutputFreq_Value=48000000
|
|
||||||
RCC.PLLRCLKFreq_Value=192000000
|
|
||||||
RCC.PLLRoutputFreq_Value=192000000
|
|
||||||
RCC.PRESCALERUSB=RCC_USBCLKSOURCE_PLL_DIV1_5
|
|
||||||
RCC.PWRFreq_Value=96000000
|
|
||||||
RCC.RNGFreq_Value=48000000
|
|
||||||
RCC.RTCFreq_Value=32000
|
|
||||||
RCC.RTCHSEDivFreq_Value=4000000
|
|
||||||
RCC.SAI1AFreq_Value=8000000
|
|
||||||
RCC.SAI1BFreq_Value=8000000
|
|
||||||
RCC.SDIOFreq_Value=48000000
|
|
||||||
RCC.SYSCLKFreq_VALUE=96000000
|
|
||||||
RCC.SYSCLKSource=RCC_SYSCLKSOURCE_PLLCLK
|
|
||||||
RCC.SYSCLKSourceVirtual=RCC_SYSCLKSOURCE_PLLCLK
|
|
||||||
RCC.TIM15Freq_Value=72000000
|
|
||||||
RCC.TIM16Freq_Value=72000000
|
|
||||||
RCC.TIM17Freq_Value=72000000
|
|
||||||
RCC.TIM1Freq_Value=72000000
|
|
||||||
RCC.TIM20Freq_Value=72000000
|
|
||||||
RCC.TIM2Freq_Value=72000000
|
|
||||||
RCC.TIM3Freq_Value=72000000
|
|
||||||
RCC.TIM8Freq_Value=72000000
|
RCC.TIM8Freq_Value=72000000
|
||||||
RCC.UART4Freq_Value=36000000
|
RCC.UART4Freq_Value=36000000
|
||||||
RCC.UART5Freq_Value=36000000
|
MxCube.Version=5.1.0
|
||||||
RCC.USART1Freq_Value=72000000
|
RCC.PRESCALERUSB=RCC_USBCLKSOURCE_PLL_DIV1_5
|
||||||
RCC.USART2Freq_Value=36000000
|
VP_TIM2_VS_ClockSourceINT.Mode=Internal
|
||||||
RCC.USART3Freq_Value=36000000
|
Mcu.Pin35=VP_TIM14_VS_ClockSourceINT
|
||||||
RCC.USBFreq_Value=48000000
|
RCC.I2C1Freq_Value=8000000
|
||||||
RCC.VCOI2SInputFreq_Value=500000
|
RCC.PLLI2SPCLKFreq_Value=48000000
|
||||||
RCC.VCOI2SOutputFreq_Value=96000000
|
PC13.GPIOParameters=GPIO_Label
|
||||||
RCC.VCOInputFreq_Value=1000000
|
PG7.GPIO_Label=USB_OverCurrent [STMPS2151STR_FAULT]
|
||||||
RCC.VCOInputMFreq_Value=500000
|
RCC.RNGFreq_Value=48000000
|
||||||
RCC.VCOOutput2Freq_Value=8000000
|
Mcu.Pin30=VP_RTC_VS_RTC_Activate
|
||||||
RCC.VCOOutputFreq_Value=384000000
|
PA10.GPIOParameters=GPIO_Label
|
||||||
RCC.VcooutputI2S=48000000
|
|
||||||
RCC.WatchDogFreq_Value=32000
|
|
||||||
SH.GPXTI13.0=GPIO_EXTI13
|
|
||||||
SH.GPXTI13.ConfNb=1
|
|
||||||
USART3.IPParameters=VirtualMode
|
|
||||||
USART3.VirtualMode=VM_ASYNC
|
|
||||||
USB_OTG_FS.IPParameters=VirtualMode
|
|
||||||
USB_OTG_FS.VirtualMode=Device_Only
|
|
||||||
VP_SYS_VS_Systick.Mode=SysTick
|
VP_SYS_VS_Systick.Mode=SysTick
|
||||||
VP_SYS_VS_Systick.Signal=SYS_VS_Systick
|
RCC.EthernetFreq_Value=8000000
|
||||||
board=NUCLEO-F413ZH
|
Mcu.Pin33=VP_TIM11_VS_ClockSourceINT
|
||||||
boardIOC=true
|
Mcu.Pin34=VP_TIM13_VS_ClockSourceINT
|
||||||
|
Mcu.Pin31=VP_SYS_VS_Systick
|
||||||
|
Mcu.Pin32=VP_TIM2_VS_ClockSourceINT
|
||||||
|
PA9.Locked=true
|
||||||
|
NVIC.NonMaskableInt_IRQn=true\:0\:0\:false\:false\:true\:true\:false
|
||||||
|
RCC.UART5Freq_Value=36000000
|
||||||
|
PA13.Mode=Serial_Wire
|
||||||
|
ProjectManager.FreePins=false
|
||||||
|
RCC.IPParameters=48MHZClocksFreq_Value,ADC12outputFreq_Value,ADC34outputFreq_Value,AHBFreq_Value,APB1CLKDivider,APB1Freq_Value,APB1TimFreq_Value,APB2Freq_Value,APB2TimFreq_Value,CortexFreq_Value,DFSDM2AudioFreq_Value,DFSDMAudioFreq_Value,DFSDMFreq_Value,EthernetFreq_Value,FCLKCortexFreq_Value,FMPI2C1Freq_Value,FamilyName,HCLKFreq_Value,HSE_VALUE,HSI_VALUE,I2C1Freq_Value,I2C2Freq_Value,I2C3Freq_Value,I2S1Freq_Value,I2S2Freq_Value,I2SClocksFreq_Value,LPTimerFreq_Value,LSI_VALUE,MCO1PinFreq_Value,MCO2PinFreq_Value,MCOFreq_Value,PLLCLKFreq_Value,PLLI2SPCLKFreq_Value,PLLI2SQCLKFreq_Value,PLLI2SQoutputFreq_Value,PLLI2SRCLKFreq_Value,PLLI2SoutputFreq_Value,PLLM,PLLMCOFreq_Value,PLLMUL,PLLN,PLLP,PLLQ,PLLQCLKFreq_Value,PLLQoutputFreq_Value,PLLRCLKFreq_Value,PLLRoutputFreq_Value,PRESCALERUSB,PWRFreq_Value,RNGFreq_Value,RTCFreq_Value,RTCHSEDivFreq_Value,SAI1AFreq_Value,SAI1BFreq_Value,SDIOFreq_Value,SYSCLKFreq_VALUE,SYSCLKSource,SYSCLKSourceVirtual,TIM15Freq_Value,TIM16Freq_Value,TIM17Freq_Value,TIM1Freq_Value,TIM20Freq_Value,TIM2Freq_Value,TIM3Freq_Value,TIM8Freq_Value,UART4Freq_Value,UART5Freq_Value,USART1Freq_Value,USART2Freq_Value,USART3Freq_Value,USBFreq_Value,VCOI2SInputFreq_Value,VCOI2SOutputFreq_Value,VCOInputFreq_Value,VCOInputMFreq_Value,VCOOutput2Freq_Value,VCOOutputFreq_Value,VcooutputI2S,WatchDogFreq_Value
|
||||||
|
PC9.GPIOParameters=GPIO_Label
|
||||||
|
ProjectManager.AskForMigrate=true
|
||||||
|
Mcu.Name=STM32F413Z(G-H)Tx
|
||||||
|
RCC.PLLI2SQCLKFreq_Value=48000000
|
||||||
|
Mcu.Pin26=PB6
|
||||||
|
Mcu.Pin27=PB7
|
||||||
|
RCC.RTCHSEDivFreq_Value=4000000
|
||||||
|
PA2.Signal=USART2_TX
|
||||||
|
PA13.GPIO_Label=TMS
|
||||||
|
Mcu.Pin24=PD6
|
||||||
|
ProjectManager.UnderRoot=false
|
||||||
|
Mcu.Pin25=PB3
|
||||||
|
Mcu.IP8=TIM2
|
||||||
|
Mcu.IP9=TIM11
|
||||||
|
Mcu.Pin28=PB9
|
||||||
|
Mcu.IP6=SPI2
|
||||||
|
Mcu.Pin29=VP_IWDG_VS_IWDG
|
||||||
|
Mcu.IP7=SYS
|
||||||
|
ProjectManager.CoupleFile=false
|
||||||
|
RCC.48MHZClocksFreq_Value=24000000
|
||||||
|
PB3.Signal=SYS_JTDO-SWO
|
||||||
|
RCC.SYSCLKFreq_VALUE=96000000
|
||||||
|
Mcu.Pin22=PA13
|
||||||
|
Mcu.Pin23=PA14
|
||||||
|
Mcu.Pin20=PA11
|
||||||
|
ADC1.master=1
|
||||||
|
Mcu.Pin21=PA12
|
||||||
|
PA12.Mode=Device_Only
|
||||||
|
PA10.Locked=true
|
||||||
|
NVIC.ForceEnableDMAVector=true
|
||||||
|
KeepUserPlacement=true
|
||||||
|
USART3.VirtualMode=VM_ASYNC
|
||||||
|
PA14.GPIOParameters=GPIO_Label
|
||||||
|
NVIC.MemoryManagement_IRQn=true\:0\:0\:false\:false\:true\:true\:false
|
||||||
|
PA13.Locked=true
|
||||||
|
ProjectManager.CompilerOptimize=6
|
||||||
|
PA11.Signal=USB_OTG_FS_DM
|
||||||
|
VP_IWDG_VS_IWDG.Signal=IWDG_VS_IWDG
|
||||||
|
PA14.Signal=SYS_JTCK-SWCLK
|
||||||
|
ProjectManager.HeapSize=0x200
|
||||||
|
Mcu.Pin15=PG7
|
||||||
|
NVIC.HardFault_IRQn=true\:0\:0\:false\:false\:true\:true\:false
|
||||||
|
Mcu.Pin16=PC9
|
||||||
|
SH.S_TIM2_CH4.0=TIM2_CH4,PWM Generation4 CH4
|
||||||
|
Mcu.Pin13=PD9
|
||||||
|
Mcu.Pin14=PG6
|
||||||
|
Mcu.Pin19=PA10
|
||||||
|
RCC.TIM20Freq_Value=72000000
|
||||||
|
ProjectManager.ComputerToolchain=false
|
||||||
|
Mcu.Pin17=PA8
|
||||||
|
RCC.HSI_VALUE=16000000
|
||||||
|
Mcu.Pin18=PA9
|
||||||
|
RCC.TIM3Freq_Value=72000000
|
||||||
|
SH.ADCx_IN5.0=ADC1_IN5,IN5
|
||||||
|
RCC.PLLP=RCC_PLLP_DIV4
|
||||||
|
RCC.PLLQ=8
|
||||||
|
NVIC.PriorityGroup=NVIC_PRIORITYGROUP_4
|
||||||
|
ADC1.NbrOfConversionFlag=1
|
||||||
|
Mcu.Pin11=PB14
|
||||||
|
Mcu.Pin12=PD8
|
||||||
|
RCC.PLLM=8
|
||||||
|
RCC.PLLN=384
|
||||||
|
Mcu.Pin10=PB10
|
||||||
|
PB7.Locked=true
|
||||||
|
PA2.Mode=Asynchronous
|
||||||
|
RCC.PWRFreq_Value=96000000
|
||||||
|
PH0\ -\ OSC_IN.GPIO_Label=MCO
|
||||||
|
PA8.Mode=Activate_SOF_FS
|
||||||
|
SH.ADCx_IN5.ConfNb=1
|
||||||
|
PC9.Signal=GPIO_Output
|
||||||
|
RCC.I2C2Freq_Value=8000000
|
||||||
|
PD9.Locked=true
|
||||||
|
RCC.APB1Freq_Value=48000000
|
||||||
|
ProjectManager.DeviceId=STM32F413ZHTx
|
||||||
|
PG7.GPIOParameters=GPIO_Label
|
||||||
|
ProjectManager.LibraryCopy=0
|
||||||
|
|
@ -62,6 +62,22 @@
|
||||||
/* USER CODE END PM */
|
/* USER CODE END PM */
|
||||||
|
|
||||||
/* Private variables ---------------------------------------------------------*/
|
/* Private variables ---------------------------------------------------------*/
|
||||||
|
ADC_HandleTypeDef hadc1;
|
||||||
|
|
||||||
|
I2C_HandleTypeDef hi2c1;
|
||||||
|
|
||||||
|
IWDG_HandleTypeDef hiwdg;
|
||||||
|
|
||||||
|
RTC_HandleTypeDef hrtc;
|
||||||
|
|
||||||
|
SPI_HandleTypeDef hspi2;
|
||||||
|
|
||||||
|
TIM_HandleTypeDef htim2;
|
||||||
|
TIM_HandleTypeDef htim11;
|
||||||
|
TIM_HandleTypeDef htim13;
|
||||||
|
TIM_HandleTypeDef htim14;
|
||||||
|
|
||||||
|
UART_HandleTypeDef huart2;
|
||||||
UART_HandleTypeDef huart3;
|
UART_HandleTypeDef huart3;
|
||||||
|
|
||||||
PCD_HandleTypeDef hpcd_USB_OTG_FS;
|
PCD_HandleTypeDef hpcd_USB_OTG_FS;
|
||||||
|
|
@ -75,6 +91,16 @@ void SystemClock_Config(void);
|
||||||
static void MX_GPIO_Init(void);
|
static void MX_GPIO_Init(void);
|
||||||
static void MX_USART3_UART_Init(void);
|
static void MX_USART3_UART_Init(void);
|
||||||
static void MX_USB_OTG_FS_PCD_Init(void);
|
static void MX_USB_OTG_FS_PCD_Init(void);
|
||||||
|
static void MX_ADC1_Init(void);
|
||||||
|
static void MX_I2C1_Init(void);
|
||||||
|
static void MX_IWDG_Init(void);
|
||||||
|
static void MX_RTC_Init(void);
|
||||||
|
static void MX_SPI2_Init(void);
|
||||||
|
static void MX_TIM2_Init(void);
|
||||||
|
static void MX_TIM11_Init(void);
|
||||||
|
static void MX_TIM13_Init(void);
|
||||||
|
static void MX_TIM14_Init(void);
|
||||||
|
static void MX_USART2_UART_Init(void);
|
||||||
/* USER CODE BEGIN PFP */
|
/* USER CODE BEGIN PFP */
|
||||||
|
|
||||||
/* USER CODE END PFP */
|
/* USER CODE END PFP */
|
||||||
|
|
@ -114,6 +140,16 @@ int main(void)
|
||||||
MX_GPIO_Init();
|
MX_GPIO_Init();
|
||||||
MX_USART3_UART_Init();
|
MX_USART3_UART_Init();
|
||||||
MX_USB_OTG_FS_PCD_Init();
|
MX_USB_OTG_FS_PCD_Init();
|
||||||
|
MX_ADC1_Init();
|
||||||
|
MX_I2C1_Init();
|
||||||
|
MX_IWDG_Init();
|
||||||
|
MX_RTC_Init();
|
||||||
|
MX_SPI2_Init();
|
||||||
|
MX_TIM2_Init();
|
||||||
|
MX_TIM11_Init();
|
||||||
|
MX_TIM13_Init();
|
||||||
|
MX_TIM14_Init();
|
||||||
|
MX_USART2_UART_Init();
|
||||||
/* USER CODE BEGIN 2 */
|
/* USER CODE BEGIN 2 */
|
||||||
|
|
||||||
/* USER CODE END 2 */
|
/* USER CODE END 2 */
|
||||||
|
|
@ -145,8 +181,9 @@ void SystemClock_Config(void)
|
||||||
__HAL_PWR_VOLTAGESCALING_CONFIG(PWR_REGULATOR_VOLTAGE_SCALE1);
|
__HAL_PWR_VOLTAGESCALING_CONFIG(PWR_REGULATOR_VOLTAGE_SCALE1);
|
||||||
/** Initializes the CPU, AHB and APB busses clocks
|
/** Initializes the CPU, AHB and APB busses clocks
|
||||||
*/
|
*/
|
||||||
RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_HSE;
|
RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_LSI|RCC_OSCILLATORTYPE_HSE;
|
||||||
RCC_OscInitStruct.HSEState = RCC_HSE_BYPASS;
|
RCC_OscInitStruct.HSEState = RCC_HSE_BYPASS;
|
||||||
|
RCC_OscInitStruct.LSIState = RCC_LSI_ON;
|
||||||
RCC_OscInitStruct.PLL.PLLState = RCC_PLL_ON;
|
RCC_OscInitStruct.PLL.PLLState = RCC_PLL_ON;
|
||||||
RCC_OscInitStruct.PLL.PLLSource = RCC_PLLSOURCE_HSE;
|
RCC_OscInitStruct.PLL.PLLSource = RCC_PLLSOURCE_HSE;
|
||||||
RCC_OscInitStruct.PLL.PLLM = 8;
|
RCC_OscInitStruct.PLL.PLLM = 8;
|
||||||
|
|
@ -171,7 +208,8 @@ void SystemClock_Config(void)
|
||||||
{
|
{
|
||||||
Error_Handler();
|
Error_Handler();
|
||||||
}
|
}
|
||||||
PeriphClkInitStruct.PeriphClockSelection = RCC_PERIPHCLK_CLK48;
|
PeriphClkInitStruct.PeriphClockSelection = RCC_PERIPHCLK_RTC|RCC_PERIPHCLK_CLK48;
|
||||||
|
PeriphClkInitStruct.RTCClockSelection = RCC_RTCCLKSOURCE_LSI;
|
||||||
PeriphClkInitStruct.Clk48ClockSelection = RCC_CLK48CLKSOURCE_PLLQ;
|
PeriphClkInitStruct.Clk48ClockSelection = RCC_CLK48CLKSOURCE_PLLQ;
|
||||||
if (HAL_RCCEx_PeriphCLKConfig(&PeriphClkInitStruct) != HAL_OK)
|
if (HAL_RCCEx_PeriphCLKConfig(&PeriphClkInitStruct) != HAL_OK)
|
||||||
{
|
{
|
||||||
|
|
@ -179,6 +217,375 @@ void SystemClock_Config(void)
|
||||||
}
|
}
|
||||||
}
|
}
|
||||||
|
|
||||||
|
/**
|
||||||
|
* @brief ADC1 Initialization Function
|
||||||
|
* @param None
|
||||||
|
* @retval None
|
||||||
|
*/
|
||||||
|
static void MX_ADC1_Init(void)
|
||||||
|
{
|
||||||
|
|
||||||
|
/* USER CODE BEGIN ADC1_Init 0 */
|
||||||
|
|
||||||
|
/* USER CODE END ADC1_Init 0 */
|
||||||
|
|
||||||
|
ADC_ChannelConfTypeDef sConfig = {0};
|
||||||
|
|
||||||
|
/* USER CODE BEGIN ADC1_Init 1 */
|
||||||
|
|
||||||
|
/* USER CODE END ADC1_Init 1 */
|
||||||
|
/** Configure the global features of the ADC (Clock, Resolution, Data Alignment and number of conversion)
|
||||||
|
*/
|
||||||
|
hadc1.Instance = ADC1;
|
||||||
|
hadc1.Init.ClockPrescaler = ADC_CLOCK_SYNC_PCLK_DIV4;
|
||||||
|
hadc1.Init.Resolution = ADC_RESOLUTION_12B;
|
||||||
|
hadc1.Init.ScanConvMode = DISABLE;
|
||||||
|
hadc1.Init.ContinuousConvMode = DISABLE;
|
||||||
|
hadc1.Init.DiscontinuousConvMode = DISABLE;
|
||||||
|
hadc1.Init.ExternalTrigConvEdge = ADC_EXTERNALTRIGCONVEDGE_NONE;
|
||||||
|
hadc1.Init.ExternalTrigConv = ADC_SOFTWARE_START;
|
||||||
|
hadc1.Init.DataAlign = ADC_DATAALIGN_RIGHT;
|
||||||
|
hadc1.Init.NbrOfConversion = 1;
|
||||||
|
hadc1.Init.DMAContinuousRequests = DISABLE;
|
||||||
|
hadc1.Init.EOCSelection = ADC_EOC_SINGLE_CONV;
|
||||||
|
if (HAL_ADC_Init(&hadc1) != HAL_OK)
|
||||||
|
{
|
||||||
|
Error_Handler();
|
||||||
|
}
|
||||||
|
/** Configure for the selected ADC regular channel its corresponding rank in the sequencer and its sample time.
|
||||||
|
*/
|
||||||
|
sConfig.Channel = ADC_CHANNEL_5;
|
||||||
|
sConfig.Rank = 1;
|
||||||
|
sConfig.SamplingTime = ADC_SAMPLETIME_3CYCLES;
|
||||||
|
if (HAL_ADC_ConfigChannel(&hadc1, &sConfig) != HAL_OK)
|
||||||
|
{
|
||||||
|
Error_Handler();
|
||||||
|
}
|
||||||
|
/* USER CODE BEGIN ADC1_Init 2 */
|
||||||
|
|
||||||
|
/* USER CODE END ADC1_Init 2 */
|
||||||
|
|
||||||
|
}
|
||||||
|
|
||||||
|
/**
|
||||||
|
* @brief I2C1 Initialization Function
|
||||||
|
* @param None
|
||||||
|
* @retval None
|
||||||
|
*/
|
||||||
|
static void MX_I2C1_Init(void)
|
||||||
|
{
|
||||||
|
|
||||||
|
/* USER CODE BEGIN I2C1_Init 0 */
|
||||||
|
|
||||||
|
/* USER CODE END I2C1_Init 0 */
|
||||||
|
|
||||||
|
/* USER CODE BEGIN I2C1_Init 1 */
|
||||||
|
|
||||||
|
/* USER CODE END I2C1_Init 1 */
|
||||||
|
hi2c1.Instance = I2C1;
|
||||||
|
hi2c1.Init.ClockSpeed = 100000;
|
||||||
|
hi2c1.Init.DutyCycle = I2C_DUTYCYCLE_2;
|
||||||
|
hi2c1.Init.OwnAddress1 = 0;
|
||||||
|
hi2c1.Init.AddressingMode = I2C_ADDRESSINGMODE_7BIT;
|
||||||
|
hi2c1.Init.DualAddressMode = I2C_DUALADDRESS_DISABLE;
|
||||||
|
hi2c1.Init.OwnAddress2 = 0;
|
||||||
|
hi2c1.Init.GeneralCallMode = I2C_GENERALCALL_DISABLE;
|
||||||
|
hi2c1.Init.NoStretchMode = I2C_NOSTRETCH_DISABLE;
|
||||||
|
if (HAL_I2C_Init(&hi2c1) != HAL_OK)
|
||||||
|
{
|
||||||
|
Error_Handler();
|
||||||
|
}
|
||||||
|
/* USER CODE BEGIN I2C1_Init 2 */
|
||||||
|
|
||||||
|
/* USER CODE END I2C1_Init 2 */
|
||||||
|
|
||||||
|
}
|
||||||
|
|
||||||
|
/**
|
||||||
|
* @brief IWDG Initialization Function
|
||||||
|
* @param None
|
||||||
|
* @retval None
|
||||||
|
*/
|
||||||
|
static void MX_IWDG_Init(void)
|
||||||
|
{
|
||||||
|
|
||||||
|
/* USER CODE BEGIN IWDG_Init 0 */
|
||||||
|
|
||||||
|
/* USER CODE END IWDG_Init 0 */
|
||||||
|
|
||||||
|
/* USER CODE BEGIN IWDG_Init 1 */
|
||||||
|
|
||||||
|
/* USER CODE END IWDG_Init 1 */
|
||||||
|
hiwdg.Instance = IWDG;
|
||||||
|
hiwdg.Init.Prescaler = IWDG_PRESCALER_4;
|
||||||
|
hiwdg.Init.Reload = 4095;
|
||||||
|
if (HAL_IWDG_Init(&hiwdg) != HAL_OK)
|
||||||
|
{
|
||||||
|
Error_Handler();
|
||||||
|
}
|
||||||
|
/* USER CODE BEGIN IWDG_Init 2 */
|
||||||
|
|
||||||
|
/* USER CODE END IWDG_Init 2 */
|
||||||
|
|
||||||
|
}
|
||||||
|
|
||||||
|
/**
|
||||||
|
* @brief RTC Initialization Function
|
||||||
|
* @param None
|
||||||
|
* @retval None
|
||||||
|
*/
|
||||||
|
static void MX_RTC_Init(void)
|
||||||
|
{
|
||||||
|
|
||||||
|
/* USER CODE BEGIN RTC_Init 0 */
|
||||||
|
|
||||||
|
/* USER CODE END RTC_Init 0 */
|
||||||
|
|
||||||
|
/* USER CODE BEGIN RTC_Init 1 */
|
||||||
|
|
||||||
|
/* USER CODE END RTC_Init 1 */
|
||||||
|
/** Initialize RTC Only
|
||||||
|
*/
|
||||||
|
hrtc.Instance = RTC;
|
||||||
|
hrtc.Init.HourFormat = RTC_HOURFORMAT_24;
|
||||||
|
hrtc.Init.AsynchPrediv = 127;
|
||||||
|
hrtc.Init.SynchPrediv = 255;
|
||||||
|
hrtc.Init.OutPut = RTC_OUTPUT_DISABLE;
|
||||||
|
hrtc.Init.OutPutPolarity = RTC_OUTPUT_POLARITY_HIGH;
|
||||||
|
hrtc.Init.OutPutType = RTC_OUTPUT_TYPE_OPENDRAIN;
|
||||||
|
if (HAL_RTC_Init(&hrtc) != HAL_OK)
|
||||||
|
{
|
||||||
|
Error_Handler();
|
||||||
|
}
|
||||||
|
/* USER CODE BEGIN RTC_Init 2 */
|
||||||
|
|
||||||
|
/* USER CODE END RTC_Init 2 */
|
||||||
|
|
||||||
|
}
|
||||||
|
|
||||||
|
/**
|
||||||
|
* @brief SPI2 Initialization Function
|
||||||
|
* @param None
|
||||||
|
* @retval None
|
||||||
|
*/
|
||||||
|
static void MX_SPI2_Init(void)
|
||||||
|
{
|
||||||
|
|
||||||
|
/* USER CODE BEGIN SPI2_Init 0 */
|
||||||
|
|
||||||
|
/* USER CODE END SPI2_Init 0 */
|
||||||
|
|
||||||
|
/* USER CODE BEGIN SPI2_Init 1 */
|
||||||
|
|
||||||
|
/* USER CODE END SPI2_Init 1 */
|
||||||
|
/* SPI2 parameter configuration*/
|
||||||
|
hspi2.Instance = SPI2;
|
||||||
|
hspi2.Init.Mode = SPI_MODE_MASTER;
|
||||||
|
hspi2.Init.Direction = SPI_DIRECTION_2LINES;
|
||||||
|
hspi2.Init.DataSize = SPI_DATASIZE_8BIT;
|
||||||
|
hspi2.Init.CLKPolarity = SPI_POLARITY_LOW;
|
||||||
|
hspi2.Init.CLKPhase = SPI_PHASE_1EDGE;
|
||||||
|
hspi2.Init.NSS = SPI_NSS_SOFT;
|
||||||
|
hspi2.Init.BaudRatePrescaler = SPI_BAUDRATEPRESCALER_2;
|
||||||
|
hspi2.Init.FirstBit = SPI_FIRSTBIT_MSB;
|
||||||
|
hspi2.Init.TIMode = SPI_TIMODE_DISABLE;
|
||||||
|
hspi2.Init.CRCCalculation = SPI_CRCCALCULATION_DISABLE;
|
||||||
|
hspi2.Init.CRCPolynomial = 10;
|
||||||
|
if (HAL_SPI_Init(&hspi2) != HAL_OK)
|
||||||
|
{
|
||||||
|
Error_Handler();
|
||||||
|
}
|
||||||
|
/* USER CODE BEGIN SPI2_Init 2 */
|
||||||
|
|
||||||
|
/* USER CODE END SPI2_Init 2 */
|
||||||
|
|
||||||
|
}
|
||||||
|
|
||||||
|
/**
|
||||||
|
* @brief TIM2 Initialization Function
|
||||||
|
* @param None
|
||||||
|
* @retval None
|
||||||
|
*/
|
||||||
|
static void MX_TIM2_Init(void)
|
||||||
|
{
|
||||||
|
|
||||||
|
/* USER CODE BEGIN TIM2_Init 0 */
|
||||||
|
|
||||||
|
/* USER CODE END TIM2_Init 0 */
|
||||||
|
|
||||||
|
TIM_ClockConfigTypeDef sClockSourceConfig = {0};
|
||||||
|
TIM_MasterConfigTypeDef sMasterConfig = {0};
|
||||||
|
TIM_OC_InitTypeDef sConfigOC = {0};
|
||||||
|
|
||||||
|
/* USER CODE BEGIN TIM2_Init 1 */
|
||||||
|
|
||||||
|
/* USER CODE END TIM2_Init 1 */
|
||||||
|
htim2.Instance = TIM2;
|
||||||
|
htim2.Init.Prescaler = 0;
|
||||||
|
htim2.Init.CounterMode = TIM_COUNTERMODE_UP;
|
||||||
|
htim2.Init.Period = 0;
|
||||||
|
htim2.Init.ClockDivision = TIM_CLOCKDIVISION_DIV1;
|
||||||
|
htim2.Init.AutoReloadPreload = TIM_AUTORELOAD_PRELOAD_DISABLE;
|
||||||
|
if (HAL_TIM_Base_Init(&htim2) != HAL_OK)
|
||||||
|
{
|
||||||
|
Error_Handler();
|
||||||
|
}
|
||||||
|
sClockSourceConfig.ClockSource = TIM_CLOCKSOURCE_INTERNAL;
|
||||||
|
if (HAL_TIM_ConfigClockSource(&htim2, &sClockSourceConfig) != HAL_OK)
|
||||||
|
{
|
||||||
|
Error_Handler();
|
||||||
|
}
|
||||||
|
if (HAL_TIM_PWM_Init(&htim2) != HAL_OK)
|
||||||
|
{
|
||||||
|
Error_Handler();
|
||||||
|
}
|
||||||
|
sMasterConfig.MasterOutputTrigger = TIM_TRGO_RESET;
|
||||||
|
sMasterConfig.MasterSlaveMode = TIM_MASTERSLAVEMODE_DISABLE;
|
||||||
|
if (HAL_TIMEx_MasterConfigSynchronization(&htim2, &sMasterConfig) != HAL_OK)
|
||||||
|
{
|
||||||
|
Error_Handler();
|
||||||
|
}
|
||||||
|
sConfigOC.OCMode = TIM_OCMODE_PWM1;
|
||||||
|
sConfigOC.Pulse = 0;
|
||||||
|
sConfigOC.OCPolarity = TIM_OCPOLARITY_HIGH;
|
||||||
|
sConfigOC.OCFastMode = TIM_OCFAST_DISABLE;
|
||||||
|
if (HAL_TIM_PWM_ConfigChannel(&htim2, &sConfigOC, TIM_CHANNEL_4) != HAL_OK)
|
||||||
|
{
|
||||||
|
Error_Handler();
|
||||||
|
}
|
||||||
|
/* USER CODE BEGIN TIM2_Init 2 */
|
||||||
|
|
||||||
|
/* USER CODE END TIM2_Init 2 */
|
||||||
|
HAL_TIM_MspPostInit(&htim2);
|
||||||
|
|
||||||
|
}
|
||||||
|
|
||||||
|
/**
|
||||||
|
* @brief TIM11 Initialization Function
|
||||||
|
* @param None
|
||||||
|
* @retval None
|
||||||
|
*/
|
||||||
|
static void MX_TIM11_Init(void)
|
||||||
|
{
|
||||||
|
|
||||||
|
/* USER CODE BEGIN TIM11_Init 0 */
|
||||||
|
|
||||||
|
/* USER CODE END TIM11_Init 0 */
|
||||||
|
|
||||||
|
/* USER CODE BEGIN TIM11_Init 1 */
|
||||||
|
|
||||||
|
/* USER CODE END TIM11_Init 1 */
|
||||||
|
htim11.Instance = TIM11;
|
||||||
|
htim11.Init.Prescaler = 0;
|
||||||
|
htim11.Init.CounterMode = TIM_COUNTERMODE_UP;
|
||||||
|
htim11.Init.Period = 0;
|
||||||
|
htim11.Init.ClockDivision = TIM_CLOCKDIVISION_DIV1;
|
||||||
|
htim11.Init.AutoReloadPreload = TIM_AUTORELOAD_PRELOAD_DISABLE;
|
||||||
|
if (HAL_TIM_Base_Init(&htim11) != HAL_OK)
|
||||||
|
{
|
||||||
|
Error_Handler();
|
||||||
|
}
|
||||||
|
/* USER CODE BEGIN TIM11_Init 2 */
|
||||||
|
|
||||||
|
/* USER CODE END TIM11_Init 2 */
|
||||||
|
|
||||||
|
}
|
||||||
|
|
||||||
|
/**
|
||||||
|
* @brief TIM13 Initialization Function
|
||||||
|
* @param None
|
||||||
|
* @retval None
|
||||||
|
*/
|
||||||
|
static void MX_TIM13_Init(void)
|
||||||
|
{
|
||||||
|
|
||||||
|
/* USER CODE BEGIN TIM13_Init 0 */
|
||||||
|
|
||||||
|
/* USER CODE END TIM13_Init 0 */
|
||||||
|
|
||||||
|
/* USER CODE BEGIN TIM13_Init 1 */
|
||||||
|
|
||||||
|
/* USER CODE END TIM13_Init 1 */
|
||||||
|
htim13.Instance = TIM13;
|
||||||
|
htim13.Init.Prescaler = 0;
|
||||||
|
htim13.Init.CounterMode = TIM_COUNTERMODE_UP;
|
||||||
|
htim13.Init.Period = 0;
|
||||||
|
htim13.Init.ClockDivision = TIM_CLOCKDIVISION_DIV1;
|
||||||
|
htim13.Init.AutoReloadPreload = TIM_AUTORELOAD_PRELOAD_DISABLE;
|
||||||
|
if (HAL_TIM_Base_Init(&htim13) != HAL_OK)
|
||||||
|
{
|
||||||
|
Error_Handler();
|
||||||
|
}
|
||||||
|
/* USER CODE BEGIN TIM13_Init 2 */
|
||||||
|
|
||||||
|
/* USER CODE END TIM13_Init 2 */
|
||||||
|
|
||||||
|
}
|
||||||
|
|
||||||
|
/**
|
||||||
|
* @brief TIM14 Initialization Function
|
||||||
|
* @param None
|
||||||
|
* @retval None
|
||||||
|
*/
|
||||||
|
static void MX_TIM14_Init(void)
|
||||||
|
{
|
||||||
|
|
||||||
|
/* USER CODE BEGIN TIM14_Init 0 */
|
||||||
|
|
||||||
|
/* USER CODE END TIM14_Init 0 */
|
||||||
|
|
||||||
|
/* USER CODE BEGIN TIM14_Init 1 */
|
||||||
|
|
||||||
|
/* USER CODE END TIM14_Init 1 */
|
||||||
|
htim14.Instance = TIM14;
|
||||||
|
htim14.Init.Prescaler = 0;
|
||||||
|
htim14.Init.CounterMode = TIM_COUNTERMODE_UP;
|
||||||
|
htim14.Init.Period = 0;
|
||||||
|
htim14.Init.ClockDivision = TIM_CLOCKDIVISION_DIV1;
|
||||||
|
htim14.Init.AutoReloadPreload = TIM_AUTORELOAD_PRELOAD_DISABLE;
|
||||||
|
if (HAL_TIM_Base_Init(&htim14) != HAL_OK)
|
||||||
|
{
|
||||||
|
Error_Handler();
|
||||||
|
}
|
||||||
|
/* USER CODE BEGIN TIM14_Init 2 */
|
||||||
|
|
||||||
|
/* USER CODE END TIM14_Init 2 */
|
||||||
|
|
||||||
|
}
|
||||||
|
|
||||||
|
/**
|
||||||
|
* @brief USART2 Initialization Function
|
||||||
|
* @param None
|
||||||
|
* @retval None
|
||||||
|
*/
|
||||||
|
static void MX_USART2_UART_Init(void)
|
||||||
|
{
|
||||||
|
|
||||||
|
/* USER CODE BEGIN USART2_Init 0 */
|
||||||
|
|
||||||
|
/* USER CODE END USART2_Init 0 */
|
||||||
|
|
||||||
|
/* USER CODE BEGIN USART2_Init 1 */
|
||||||
|
|
||||||
|
/* USER CODE END USART2_Init 1 */
|
||||||
|
huart2.Instance = USART2;
|
||||||
|
huart2.Init.BaudRate = 115200;
|
||||||
|
huart2.Init.WordLength = UART_WORDLENGTH_8B;
|
||||||
|
huart2.Init.StopBits = UART_STOPBITS_1;
|
||||||
|
huart2.Init.Parity = UART_PARITY_NONE;
|
||||||
|
huart2.Init.Mode = UART_MODE_TX_RX;
|
||||||
|
huart2.Init.HwFlowCtl = UART_HWCONTROL_NONE;
|
||||||
|
huart2.Init.OverSampling = UART_OVERSAMPLING_16;
|
||||||
|
if (HAL_UART_Init(&huart2) != HAL_OK)
|
||||||
|
{
|
||||||
|
Error_Handler();
|
||||||
|
}
|
||||||
|
/* USER CODE BEGIN USART2_Init 2 */
|
||||||
|
|
||||||
|
/* USER CODE END USART2_Init 2 */
|
||||||
|
|
||||||
|
}
|
||||||
|
|
||||||
/**
|
/**
|
||||||
* @brief USART3 Initialization Function
|
* @brief USART3 Initialization Function
|
||||||
* @param None
|
* @param None
|
||||||
|
|
@ -260,10 +667,10 @@ static void MX_GPIO_Init(void)
|
||||||
/* GPIO Ports Clock Enable */
|
/* GPIO Ports Clock Enable */
|
||||||
__HAL_RCC_GPIOC_CLK_ENABLE();
|
__HAL_RCC_GPIOC_CLK_ENABLE();
|
||||||
__HAL_RCC_GPIOH_CLK_ENABLE();
|
__HAL_RCC_GPIOH_CLK_ENABLE();
|
||||||
|
__HAL_RCC_GPIOA_CLK_ENABLE();
|
||||||
__HAL_RCC_GPIOB_CLK_ENABLE();
|
__HAL_RCC_GPIOB_CLK_ENABLE();
|
||||||
__HAL_RCC_GPIOD_CLK_ENABLE();
|
__HAL_RCC_GPIOD_CLK_ENABLE();
|
||||||
__HAL_RCC_GPIOG_CLK_ENABLE();
|
__HAL_RCC_GPIOG_CLK_ENABLE();
|
||||||
__HAL_RCC_GPIOA_CLK_ENABLE();
|
|
||||||
|
|
||||||
/*Configure GPIO pin Output Level */
|
/*Configure GPIO pin Output Level */
|
||||||
HAL_GPIO_WritePin(GPIOB, LD3_Pin|LD2_Pin, GPIO_PIN_RESET);
|
HAL_GPIO_WritePin(GPIOB, LD3_Pin|LD2_Pin, GPIO_PIN_RESET);
|
||||||
|
|
|
||||||
|
|
@ -78,7 +78,9 @@
|
||||||
/* USER CODE BEGIN 0 */
|
/* USER CODE BEGIN 0 */
|
||||||
|
|
||||||
/* USER CODE END 0 */
|
/* USER CODE END 0 */
|
||||||
/**
|
|
||||||
|
void HAL_TIM_MspPostInit(TIM_HandleTypeDef *htim);
|
||||||
|
/**
|
||||||
* Initializes the Global MSP.
|
* Initializes the Global MSP.
|
||||||
*/
|
*/
|
||||||
void HAL_MspInit(void)
|
void HAL_MspInit(void)
|
||||||
|
|
@ -97,6 +99,389 @@ void HAL_MspInit(void)
|
||||||
/* USER CODE END MspInit 1 */
|
/* USER CODE END MspInit 1 */
|
||||||
}
|
}
|
||||||
|
|
||||||
|
/**
|
||||||
|
* @brief ADC MSP Initialization
|
||||||
|
* This function configures the hardware resources used in this example
|
||||||
|
* @param hadc: ADC handle pointer
|
||||||
|
* @retval None
|
||||||
|
*/
|
||||||
|
void HAL_ADC_MspInit(ADC_HandleTypeDef* hadc)
|
||||||
|
{
|
||||||
|
GPIO_InitTypeDef GPIO_InitStruct = {0};
|
||||||
|
if(hadc->Instance==ADC1)
|
||||||
|
{
|
||||||
|
/* USER CODE BEGIN ADC1_MspInit 0 */
|
||||||
|
|
||||||
|
/* USER CODE END ADC1_MspInit 0 */
|
||||||
|
/* Peripheral clock enable */
|
||||||
|
__HAL_RCC_ADC1_CLK_ENABLE();
|
||||||
|
|
||||||
|
__HAL_RCC_GPIOA_CLK_ENABLE();
|
||||||
|
/**ADC1 GPIO Configuration
|
||||||
|
PA5 ------> ADC1_IN5
|
||||||
|
*/
|
||||||
|
GPIO_InitStruct.Pin = GPIO_PIN_5;
|
||||||
|
GPIO_InitStruct.Mode = GPIO_MODE_ANALOG;
|
||||||
|
GPIO_InitStruct.Pull = GPIO_NOPULL;
|
||||||
|
HAL_GPIO_Init(GPIOA, &GPIO_InitStruct);
|
||||||
|
|
||||||
|
/* USER CODE BEGIN ADC1_MspInit 1 */
|
||||||
|
|
||||||
|
/* USER CODE END ADC1_MspInit 1 */
|
||||||
|
}
|
||||||
|
|
||||||
|
}
|
||||||
|
|
||||||
|
/**
|
||||||
|
* @brief ADC MSP De-Initialization
|
||||||
|
* This function freeze the hardware resources used in this example
|
||||||
|
* @param hadc: ADC handle pointer
|
||||||
|
* @retval None
|
||||||
|
*/
|
||||||
|
void HAL_ADC_MspDeInit(ADC_HandleTypeDef* hadc)
|
||||||
|
{
|
||||||
|
if(hadc->Instance==ADC1)
|
||||||
|
{
|
||||||
|
/* USER CODE BEGIN ADC1_MspDeInit 0 */
|
||||||
|
|
||||||
|
/* USER CODE END ADC1_MspDeInit 0 */
|
||||||
|
/* Peripheral clock disable */
|
||||||
|
__HAL_RCC_ADC1_CLK_DISABLE();
|
||||||
|
|
||||||
|
/**ADC1 GPIO Configuration
|
||||||
|
PA5 ------> ADC1_IN5
|
||||||
|
*/
|
||||||
|
HAL_GPIO_DeInit(GPIOA, GPIO_PIN_5);
|
||||||
|
|
||||||
|
/* USER CODE BEGIN ADC1_MspDeInit 1 */
|
||||||
|
|
||||||
|
/* USER CODE END ADC1_MspDeInit 1 */
|
||||||
|
}
|
||||||
|
|
||||||
|
}
|
||||||
|
|
||||||
|
/**
|
||||||
|
* @brief I2C MSP Initialization
|
||||||
|
* This function configures the hardware resources used in this example
|
||||||
|
* @param hi2c: I2C handle pointer
|
||||||
|
* @retval None
|
||||||
|
*/
|
||||||
|
void HAL_I2C_MspInit(I2C_HandleTypeDef* hi2c)
|
||||||
|
{
|
||||||
|
GPIO_InitTypeDef GPIO_InitStruct = {0};
|
||||||
|
if(hi2c->Instance==I2C1)
|
||||||
|
{
|
||||||
|
/* USER CODE BEGIN I2C1_MspInit 0 */
|
||||||
|
|
||||||
|
/* USER CODE END I2C1_MspInit 0 */
|
||||||
|
|
||||||
|
__HAL_RCC_GPIOB_CLK_ENABLE();
|
||||||
|
/**I2C1 GPIO Configuration
|
||||||
|
PB6 ------> I2C1_SCL
|
||||||
|
PB9 ------> I2C1_SDA
|
||||||
|
*/
|
||||||
|
GPIO_InitStruct.Pin = GPIO_PIN_6|GPIO_PIN_9;
|
||||||
|
GPIO_InitStruct.Mode = GPIO_MODE_AF_OD;
|
||||||
|
GPIO_InitStruct.Pull = GPIO_PULLUP;
|
||||||
|
GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_VERY_HIGH;
|
||||||
|
GPIO_InitStruct.Alternate = GPIO_AF4_I2C1;
|
||||||
|
HAL_GPIO_Init(GPIOB, &GPIO_InitStruct);
|
||||||
|
|
||||||
|
/* Peripheral clock enable */
|
||||||
|
__HAL_RCC_I2C1_CLK_ENABLE();
|
||||||
|
/* USER CODE BEGIN I2C1_MspInit 1 */
|
||||||
|
|
||||||
|
/* USER CODE END I2C1_MspInit 1 */
|
||||||
|
}
|
||||||
|
|
||||||
|
}
|
||||||
|
|
||||||
|
/**
|
||||||
|
* @brief I2C MSP De-Initialization
|
||||||
|
* This function freeze the hardware resources used in this example
|
||||||
|
* @param hi2c: I2C handle pointer
|
||||||
|
* @retval None
|
||||||
|
*/
|
||||||
|
void HAL_I2C_MspDeInit(I2C_HandleTypeDef* hi2c)
|
||||||
|
{
|
||||||
|
if(hi2c->Instance==I2C1)
|
||||||
|
{
|
||||||
|
/* USER CODE BEGIN I2C1_MspDeInit 0 */
|
||||||
|
|
||||||
|
/* USER CODE END I2C1_MspDeInit 0 */
|
||||||
|
/* Peripheral clock disable */
|
||||||
|
__HAL_RCC_I2C1_CLK_DISABLE();
|
||||||
|
|
||||||
|
/**I2C1 GPIO Configuration
|
||||||
|
PB6 ------> I2C1_SCL
|
||||||
|
PB9 ------> I2C1_SDA
|
||||||
|
*/
|
||||||
|
HAL_GPIO_DeInit(GPIOB, GPIO_PIN_6|GPIO_PIN_9);
|
||||||
|
|
||||||
|
/* USER CODE BEGIN I2C1_MspDeInit 1 */
|
||||||
|
|
||||||
|
/* USER CODE END I2C1_MspDeInit 1 */
|
||||||
|
}
|
||||||
|
|
||||||
|
}
|
||||||
|
|
||||||
|
/**
|
||||||
|
* @brief RTC MSP Initialization
|
||||||
|
* This function configures the hardware resources used in this example
|
||||||
|
* @param hrtc: RTC handle pointer
|
||||||
|
* @retval None
|
||||||
|
*/
|
||||||
|
void HAL_RTC_MspInit(RTC_HandleTypeDef* hrtc)
|
||||||
|
{
|
||||||
|
if(hrtc->Instance==RTC)
|
||||||
|
{
|
||||||
|
/* USER CODE BEGIN RTC_MspInit 0 */
|
||||||
|
|
||||||
|
/* USER CODE END RTC_MspInit 0 */
|
||||||
|
/* Peripheral clock enable */
|
||||||
|
__HAL_RCC_RTC_ENABLE();
|
||||||
|
/* USER CODE BEGIN RTC_MspInit 1 */
|
||||||
|
|
||||||
|
/* USER CODE END RTC_MspInit 1 */
|
||||||
|
}
|
||||||
|
|
||||||
|
}
|
||||||
|
|
||||||
|
/**
|
||||||
|
* @brief RTC MSP De-Initialization
|
||||||
|
* This function freeze the hardware resources used in this example
|
||||||
|
* @param hrtc: RTC handle pointer
|
||||||
|
* @retval None
|
||||||
|
*/
|
||||||
|
void HAL_RTC_MspDeInit(RTC_HandleTypeDef* hrtc)
|
||||||
|
{
|
||||||
|
if(hrtc->Instance==RTC)
|
||||||
|
{
|
||||||
|
/* USER CODE BEGIN RTC_MspDeInit 0 */
|
||||||
|
|
||||||
|
/* USER CODE END RTC_MspDeInit 0 */
|
||||||
|
/* Peripheral clock disable */
|
||||||
|
__HAL_RCC_RTC_DISABLE();
|
||||||
|
/* USER CODE BEGIN RTC_MspDeInit 1 */
|
||||||
|
|
||||||
|
/* USER CODE END RTC_MspDeInit 1 */
|
||||||
|
}
|
||||||
|
|
||||||
|
}
|
||||||
|
|
||||||
|
/**
|
||||||
|
* @brief SPI MSP Initialization
|
||||||
|
* This function configures the hardware resources used in this example
|
||||||
|
* @param hspi: SPI handle pointer
|
||||||
|
* @retval None
|
||||||
|
*/
|
||||||
|
void HAL_SPI_MspInit(SPI_HandleTypeDef* hspi)
|
||||||
|
{
|
||||||
|
GPIO_InitTypeDef GPIO_InitStruct = {0};
|
||||||
|
if(hspi->Instance==SPI2)
|
||||||
|
{
|
||||||
|
/* USER CODE BEGIN SPI2_MspInit 0 */
|
||||||
|
|
||||||
|
/* USER CODE END SPI2_MspInit 0 */
|
||||||
|
/* Peripheral clock enable */
|
||||||
|
__HAL_RCC_SPI2_CLK_ENABLE();
|
||||||
|
|
||||||
|
__HAL_RCC_GPIOC_CLK_ENABLE();
|
||||||
|
__HAL_RCC_GPIOB_CLK_ENABLE();
|
||||||
|
/**SPI2 GPIO Configuration
|
||||||
|
PC2 ------> SPI2_MISO
|
||||||
|
PC3 ------> SPI2_MOSI
|
||||||
|
PB10 ------> SPI2_SCK
|
||||||
|
*/
|
||||||
|
GPIO_InitStruct.Pin = GPIO_PIN_2|GPIO_PIN_3;
|
||||||
|
GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
|
||||||
|
GPIO_InitStruct.Pull = GPIO_NOPULL;
|
||||||
|
GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_VERY_HIGH;
|
||||||
|
GPIO_InitStruct.Alternate = GPIO_AF5_SPI2;
|
||||||
|
HAL_GPIO_Init(GPIOC, &GPIO_InitStruct);
|
||||||
|
|
||||||
|
GPIO_InitStruct.Pin = GPIO_PIN_10;
|
||||||
|
GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
|
||||||
|
GPIO_InitStruct.Pull = GPIO_NOPULL;
|
||||||
|
GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_VERY_HIGH;
|
||||||
|
GPIO_InitStruct.Alternate = GPIO_AF5_SPI2;
|
||||||
|
HAL_GPIO_Init(GPIOB, &GPIO_InitStruct);
|
||||||
|
|
||||||
|
/* USER CODE BEGIN SPI2_MspInit 1 */
|
||||||
|
|
||||||
|
/* USER CODE END SPI2_MspInit 1 */
|
||||||
|
}
|
||||||
|
|
||||||
|
}
|
||||||
|
|
||||||
|
/**
|
||||||
|
* @brief SPI MSP De-Initialization
|
||||||
|
* This function freeze the hardware resources used in this example
|
||||||
|
* @param hspi: SPI handle pointer
|
||||||
|
* @retval None
|
||||||
|
*/
|
||||||
|
void HAL_SPI_MspDeInit(SPI_HandleTypeDef* hspi)
|
||||||
|
{
|
||||||
|
if(hspi->Instance==SPI2)
|
||||||
|
{
|
||||||
|
/* USER CODE BEGIN SPI2_MspDeInit 0 */
|
||||||
|
|
||||||
|
/* USER CODE END SPI2_MspDeInit 0 */
|
||||||
|
/* Peripheral clock disable */
|
||||||
|
__HAL_RCC_SPI2_CLK_DISABLE();
|
||||||
|
|
||||||
|
/**SPI2 GPIO Configuration
|
||||||
|
PC2 ------> SPI2_MISO
|
||||||
|
PC3 ------> SPI2_MOSI
|
||||||
|
PB10 ------> SPI2_SCK
|
||||||
|
*/
|
||||||
|
HAL_GPIO_DeInit(GPIOC, GPIO_PIN_2|GPIO_PIN_3);
|
||||||
|
|
||||||
|
HAL_GPIO_DeInit(GPIOB, GPIO_PIN_10);
|
||||||
|
|
||||||
|
/* USER CODE BEGIN SPI2_MspDeInit 1 */
|
||||||
|
|
||||||
|
/* USER CODE END SPI2_MspDeInit 1 */
|
||||||
|
}
|
||||||
|
|
||||||
|
}
|
||||||
|
|
||||||
|
/**
|
||||||
|
* @brief TIM_Base MSP Initialization
|
||||||
|
* This function configures the hardware resources used in this example
|
||||||
|
* @param htim_base: TIM_Base handle pointer
|
||||||
|
* @retval None
|
||||||
|
*/
|
||||||
|
void HAL_TIM_Base_MspInit(TIM_HandleTypeDef* htim_base)
|
||||||
|
{
|
||||||
|
if(htim_base->Instance==TIM2)
|
||||||
|
{
|
||||||
|
/* USER CODE BEGIN TIM2_MspInit 0 */
|
||||||
|
|
||||||
|
/* USER CODE END TIM2_MspInit 0 */
|
||||||
|
/* Peripheral clock enable */
|
||||||
|
__HAL_RCC_TIM2_CLK_ENABLE();
|
||||||
|
/* USER CODE BEGIN TIM2_MspInit 1 */
|
||||||
|
|
||||||
|
/* USER CODE END TIM2_MspInit 1 */
|
||||||
|
}
|
||||||
|
else if(htim_base->Instance==TIM11)
|
||||||
|
{
|
||||||
|
/* USER CODE BEGIN TIM11_MspInit 0 */
|
||||||
|
|
||||||
|
/* USER CODE END TIM11_MspInit 0 */
|
||||||
|
/* Peripheral clock enable */
|
||||||
|
__HAL_RCC_TIM11_CLK_ENABLE();
|
||||||
|
/* USER CODE BEGIN TIM11_MspInit 1 */
|
||||||
|
|
||||||
|
/* USER CODE END TIM11_MspInit 1 */
|
||||||
|
}
|
||||||
|
else if(htim_base->Instance==TIM13)
|
||||||
|
{
|
||||||
|
/* USER CODE BEGIN TIM13_MspInit 0 */
|
||||||
|
|
||||||
|
/* USER CODE END TIM13_MspInit 0 */
|
||||||
|
/* Peripheral clock enable */
|
||||||
|
__HAL_RCC_TIM13_CLK_ENABLE();
|
||||||
|
/* USER CODE BEGIN TIM13_MspInit 1 */
|
||||||
|
|
||||||
|
/* USER CODE END TIM13_MspInit 1 */
|
||||||
|
}
|
||||||
|
else if(htim_base->Instance==TIM14)
|
||||||
|
{
|
||||||
|
/* USER CODE BEGIN TIM14_MspInit 0 */
|
||||||
|
|
||||||
|
/* USER CODE END TIM14_MspInit 0 */
|
||||||
|
/* Peripheral clock enable */
|
||||||
|
__HAL_RCC_TIM14_CLK_ENABLE();
|
||||||
|
/* USER CODE BEGIN TIM14_MspInit 1 */
|
||||||
|
|
||||||
|
/* USER CODE END TIM14_MspInit 1 */
|
||||||
|
}
|
||||||
|
|
||||||
|
}
|
||||||
|
|
||||||
|
void HAL_TIM_MspPostInit(TIM_HandleTypeDef* htim)
|
||||||
|
{
|
||||||
|
GPIO_InitTypeDef GPIO_InitStruct = {0};
|
||||||
|
if(htim->Instance==TIM2)
|
||||||
|
{
|
||||||
|
/* USER CODE BEGIN TIM2_MspPostInit 0 */
|
||||||
|
|
||||||
|
/* USER CODE END TIM2_MspPostInit 0 */
|
||||||
|
|
||||||
|
__HAL_RCC_GPIOA_CLK_ENABLE();
|
||||||
|
/**TIM2 GPIO Configuration
|
||||||
|
PA3 ------> TIM2_CH4
|
||||||
|
*/
|
||||||
|
GPIO_InitStruct.Pin = GPIO_PIN_3;
|
||||||
|
GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
|
||||||
|
GPIO_InitStruct.Pull = GPIO_NOPULL;
|
||||||
|
GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_LOW;
|
||||||
|
GPIO_InitStruct.Alternate = GPIO_AF1_TIM2;
|
||||||
|
HAL_GPIO_Init(GPIOA, &GPIO_InitStruct);
|
||||||
|
|
||||||
|
/* USER CODE BEGIN TIM2_MspPostInit 1 */
|
||||||
|
|
||||||
|
/* USER CODE END TIM2_MspPostInit 1 */
|
||||||
|
}
|
||||||
|
|
||||||
|
}
|
||||||
|
/**
|
||||||
|
* @brief TIM_Base MSP De-Initialization
|
||||||
|
* This function freeze the hardware resources used in this example
|
||||||
|
* @param htim_base: TIM_Base handle pointer
|
||||||
|
* @retval None
|
||||||
|
*/
|
||||||
|
void HAL_TIM_Base_MspDeInit(TIM_HandleTypeDef* htim_base)
|
||||||
|
{
|
||||||
|
if(htim_base->Instance==TIM2)
|
||||||
|
{
|
||||||
|
/* USER CODE BEGIN TIM2_MspDeInit 0 */
|
||||||
|
|
||||||
|
/* USER CODE END TIM2_MspDeInit 0 */
|
||||||
|
/* Peripheral clock disable */
|
||||||
|
__HAL_RCC_TIM2_CLK_DISABLE();
|
||||||
|
/* USER CODE BEGIN TIM2_MspDeInit 1 */
|
||||||
|
|
||||||
|
/* USER CODE END TIM2_MspDeInit 1 */
|
||||||
|
}
|
||||||
|
else if(htim_base->Instance==TIM11)
|
||||||
|
{
|
||||||
|
/* USER CODE BEGIN TIM11_MspDeInit 0 */
|
||||||
|
|
||||||
|
/* USER CODE END TIM11_MspDeInit 0 */
|
||||||
|
/* Peripheral clock disable */
|
||||||
|
__HAL_RCC_TIM11_CLK_DISABLE();
|
||||||
|
/* USER CODE BEGIN TIM11_MspDeInit 1 */
|
||||||
|
|
||||||
|
/* USER CODE END TIM11_MspDeInit 1 */
|
||||||
|
}
|
||||||
|
else if(htim_base->Instance==TIM13)
|
||||||
|
{
|
||||||
|
/* USER CODE BEGIN TIM13_MspDeInit 0 */
|
||||||
|
|
||||||
|
/* USER CODE END TIM13_MspDeInit 0 */
|
||||||
|
/* Peripheral clock disable */
|
||||||
|
__HAL_RCC_TIM13_CLK_DISABLE();
|
||||||
|
/* USER CODE BEGIN TIM13_MspDeInit 1 */
|
||||||
|
|
||||||
|
/* USER CODE END TIM13_MspDeInit 1 */
|
||||||
|
}
|
||||||
|
else if(htim_base->Instance==TIM14)
|
||||||
|
{
|
||||||
|
/* USER CODE BEGIN TIM14_MspDeInit 0 */
|
||||||
|
|
||||||
|
/* USER CODE END TIM14_MspDeInit 0 */
|
||||||
|
/* Peripheral clock disable */
|
||||||
|
__HAL_RCC_TIM14_CLK_DISABLE();
|
||||||
|
/* USER CODE BEGIN TIM14_MspDeInit 1 */
|
||||||
|
|
||||||
|
/* USER CODE END TIM14_MspDeInit 1 */
|
||||||
|
}
|
||||||
|
|
||||||
|
}
|
||||||
|
|
||||||
/**
|
/**
|
||||||
* @brief UART MSP Initialization
|
* @brief UART MSP Initialization
|
||||||
* This function configures the hardware resources used in this example
|
* This function configures the hardware resources used in this example
|
||||||
|
|
@ -106,7 +491,39 @@ void HAL_MspInit(void)
|
||||||
void HAL_UART_MspInit(UART_HandleTypeDef* huart)
|
void HAL_UART_MspInit(UART_HandleTypeDef* huart)
|
||||||
{
|
{
|
||||||
GPIO_InitTypeDef GPIO_InitStruct = {0};
|
GPIO_InitTypeDef GPIO_InitStruct = {0};
|
||||||
if(huart->Instance==USART3)
|
if(huart->Instance==USART2)
|
||||||
|
{
|
||||||
|
/* USER CODE BEGIN USART2_MspInit 0 */
|
||||||
|
|
||||||
|
/* USER CODE END USART2_MspInit 0 */
|
||||||
|
/* Peripheral clock enable */
|
||||||
|
__HAL_RCC_USART2_CLK_ENABLE();
|
||||||
|
|
||||||
|
__HAL_RCC_GPIOA_CLK_ENABLE();
|
||||||
|
__HAL_RCC_GPIOD_CLK_ENABLE();
|
||||||
|
/**USART2 GPIO Configuration
|
||||||
|
PA2 ------> USART2_TX
|
||||||
|
PD6 ------> USART2_RX
|
||||||
|
*/
|
||||||
|
GPIO_InitStruct.Pin = GPIO_PIN_2;
|
||||||
|
GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
|
||||||
|
GPIO_InitStruct.Pull = GPIO_PULLUP;
|
||||||
|
GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_VERY_HIGH;
|
||||||
|
GPIO_InitStruct.Alternate = GPIO_AF7_USART2;
|
||||||
|
HAL_GPIO_Init(GPIOA, &GPIO_InitStruct);
|
||||||
|
|
||||||
|
GPIO_InitStruct.Pin = GPIO_PIN_6;
|
||||||
|
GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
|
||||||
|
GPIO_InitStruct.Pull = GPIO_PULLUP;
|
||||||
|
GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_VERY_HIGH;
|
||||||
|
GPIO_InitStruct.Alternate = GPIO_AF7_USART2;
|
||||||
|
HAL_GPIO_Init(GPIOD, &GPIO_InitStruct);
|
||||||
|
|
||||||
|
/* USER CODE BEGIN USART2_MspInit 1 */
|
||||||
|
|
||||||
|
/* USER CODE END USART2_MspInit 1 */
|
||||||
|
}
|
||||||
|
else if(huart->Instance==USART3)
|
||||||
{
|
{
|
||||||
/* USER CODE BEGIN USART3_MspInit 0 */
|
/* USER CODE BEGIN USART3_MspInit 0 */
|
||||||
|
|
||||||
|
|
@ -141,7 +558,27 @@ void HAL_UART_MspInit(UART_HandleTypeDef* huart)
|
||||||
*/
|
*/
|
||||||
void HAL_UART_MspDeInit(UART_HandleTypeDef* huart)
|
void HAL_UART_MspDeInit(UART_HandleTypeDef* huart)
|
||||||
{
|
{
|
||||||
if(huart->Instance==USART3)
|
if(huart->Instance==USART2)
|
||||||
|
{
|
||||||
|
/* USER CODE BEGIN USART2_MspDeInit 0 */
|
||||||
|
|
||||||
|
/* USER CODE END USART2_MspDeInit 0 */
|
||||||
|
/* Peripheral clock disable */
|
||||||
|
__HAL_RCC_USART2_CLK_DISABLE();
|
||||||
|
|
||||||
|
/**USART2 GPIO Configuration
|
||||||
|
PA2 ------> USART2_TX
|
||||||
|
PD6 ------> USART2_RX
|
||||||
|
*/
|
||||||
|
HAL_GPIO_DeInit(GPIOA, GPIO_PIN_2);
|
||||||
|
|
||||||
|
HAL_GPIO_DeInit(GPIOD, GPIO_PIN_6);
|
||||||
|
|
||||||
|
/* USER CODE BEGIN USART2_MspDeInit 1 */
|
||||||
|
|
||||||
|
/* USER CODE END USART2_MspDeInit 1 */
|
||||||
|
}
|
||||||
|
else if(huart->Instance==USART3)
|
||||||
{
|
{
|
||||||
/* USER CODE BEGIN USART3_MspDeInit 0 */
|
/* USER CODE BEGIN USART3_MspDeInit 0 */
|
||||||
|
|
||||||
|
|
|
||||||
|
|
@ -45,6 +45,112 @@ menu "On-chip Peripheral Drivers"
|
||||||
default n
|
default n
|
||||||
endif
|
endif
|
||||||
|
|
||||||
|
menuconfig BSP_USING_SPI
|
||||||
|
bool "Enable SPI BUS"
|
||||||
|
default n
|
||||||
|
select RT_USING_SPI
|
||||||
|
if BSP_USING_SPI
|
||||||
|
config BSP_USING_SPI2
|
||||||
|
bool "Enable SPI2 BUS"
|
||||||
|
default n
|
||||||
|
|
||||||
|
config BSP_SPI2_TX_USING_DMA
|
||||||
|
bool "Enable SPI2 TX DMA"
|
||||||
|
depends on BSP_USING_SPI2
|
||||||
|
default n
|
||||||
|
|
||||||
|
config BSP_SPI2_RX_USING_DMA
|
||||||
|
bool "Enable SPI2 RX DMA"
|
||||||
|
depends on BSP_USING_SPI2
|
||||||
|
select BSP_SPI2_TX_USING_DMA
|
||||||
|
default n
|
||||||
|
|
||||||
|
endif
|
||||||
|
|
||||||
|
menuconfig BSP_USING_I2C1
|
||||||
|
bool "Enable I2C1 BUS (software simulation)"
|
||||||
|
default n
|
||||||
|
select RT_USING_I2C
|
||||||
|
select RT_USING_I2C_BITOPS
|
||||||
|
select RT_USING_PIN
|
||||||
|
if BSP_USING_I2C1
|
||||||
|
comment "Notice: PB6 --> 136; PB9 --> 140"
|
||||||
|
config BSP_I2C1_SCL_PIN
|
||||||
|
int "I2C1 scl pin number"
|
||||||
|
range 1 144
|
||||||
|
default 136
|
||||||
|
config BSP_I2C1_SDA_PIN
|
||||||
|
int "I2C1 sda pin number"
|
||||||
|
range 1 144
|
||||||
|
default 140
|
||||||
|
endif
|
||||||
|
|
||||||
|
menuconfig BSP_USING_TIM
|
||||||
|
bool "Enable timer"
|
||||||
|
default n
|
||||||
|
select RT_USING_HWTIMER
|
||||||
|
if BSP_USING_TIM
|
||||||
|
config BSP_USING_TIM11
|
||||||
|
bool "Enable TIM11"
|
||||||
|
default n
|
||||||
|
|
||||||
|
config BSP_USING_TIM13
|
||||||
|
bool "Enable TIM13"
|
||||||
|
default n
|
||||||
|
|
||||||
|
config BSP_USING_TIM14
|
||||||
|
bool "Enable TIM14"
|
||||||
|
default n
|
||||||
|
endif
|
||||||
|
|
||||||
|
menuconfig BSP_USING_PWM
|
||||||
|
bool "Enable pwm"
|
||||||
|
default n
|
||||||
|
select RT_USING_PWM
|
||||||
|
if BSP_USING_PWM
|
||||||
|
menuconfig BSP_USING_PWM2
|
||||||
|
bool "Enable timer2 output pwm"
|
||||||
|
default n
|
||||||
|
if BSP_USING_PWM2
|
||||||
|
config BSP_USING_PWM2_CH4
|
||||||
|
bool "Enable PWM2 channel4"
|
||||||
|
default n
|
||||||
|
endif
|
||||||
|
endif
|
||||||
|
|
||||||
|
menuconfig BSP_USING_ADC
|
||||||
|
bool "Enable ADC"
|
||||||
|
default n
|
||||||
|
select RT_USING_ADC
|
||||||
|
if BSP_USING_ADC
|
||||||
|
config BSP_USING_ADC1
|
||||||
|
bool "Enable ADC1"
|
||||||
|
default n
|
||||||
|
endif
|
||||||
|
|
||||||
|
menuconfig BSP_USING_ONCHIP_RTC
|
||||||
|
bool "Enable RTC"
|
||||||
|
select RT_USING_RTC
|
||||||
|
select RT_USING_LIBC
|
||||||
|
default n
|
||||||
|
if BSP_USING_ONCHIP_RTC
|
||||||
|
choice
|
||||||
|
prompt "Select clock source"
|
||||||
|
default BSP_RTC_USING_LSE
|
||||||
|
|
||||||
|
config BSP_RTC_USING_LSE
|
||||||
|
bool "RTC USING LSE"
|
||||||
|
|
||||||
|
config BSP_RTC_USING_LSI
|
||||||
|
bool "RTC USING LSI"
|
||||||
|
endchoice
|
||||||
|
endif
|
||||||
|
|
||||||
|
config BSP_USING_WDT
|
||||||
|
bool "Enable Watchdog Timer"
|
||||||
|
select RT_USING_WDT
|
||||||
|
default n
|
||||||
|
|
||||||
config BSP_USING_ON_CHIP_FLASH
|
config BSP_USING_ON_CHIP_FLASH
|
||||||
bool "Enable on-chip FLASH"
|
bool "Enable on-chip FLASH"
|
||||||
default n
|
default n
|
||||||
|
|
|
||||||
|
|
@ -26,8 +26,9 @@ void SystemClock_Config(void)
|
||||||
__HAL_PWR_VOLTAGESCALING_CONFIG(PWR_REGULATOR_VOLTAGE_SCALE1);
|
__HAL_PWR_VOLTAGESCALING_CONFIG(PWR_REGULATOR_VOLTAGE_SCALE1);
|
||||||
/** Initializes the CPU, AHB and APB busses clocks
|
/** Initializes the CPU, AHB and APB busses clocks
|
||||||
*/
|
*/
|
||||||
RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_HSE;
|
RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_LSI|RCC_OSCILLATORTYPE_HSE;
|
||||||
RCC_OscInitStruct.HSEState = RCC_HSE_BYPASS;
|
RCC_OscInitStruct.HSEState = RCC_HSE_BYPASS;
|
||||||
|
RCC_OscInitStruct.LSIState = RCC_LSI_ON;
|
||||||
RCC_OscInitStruct.PLL.PLLState = RCC_PLL_ON;
|
RCC_OscInitStruct.PLL.PLLState = RCC_PLL_ON;
|
||||||
RCC_OscInitStruct.PLL.PLLSource = RCC_PLLSOURCE_HSE;
|
RCC_OscInitStruct.PLL.PLLSource = RCC_PLLSOURCE_HSE;
|
||||||
RCC_OscInitStruct.PLL.PLLM = 8;
|
RCC_OscInitStruct.PLL.PLLM = 8;
|
||||||
|
|
@ -52,7 +53,8 @@ void SystemClock_Config(void)
|
||||||
{
|
{
|
||||||
Error_Handler();
|
Error_Handler();
|
||||||
}
|
}
|
||||||
PeriphClkInitStruct.PeriphClockSelection = RCC_PERIPHCLK_CLK48;
|
PeriphClkInitStruct.PeriphClockSelection = RCC_PERIPHCLK_RTC|RCC_PERIPHCLK_CLK48;
|
||||||
|
PeriphClkInitStruct.RTCClockSelection = RCC_RTCCLKSOURCE_LSI;
|
||||||
PeriphClkInitStruct.Clk48ClockSelection = RCC_CLK48CLKSOURCE_PLLQ;
|
PeriphClkInitStruct.Clk48ClockSelection = RCC_CLK48CLKSOURCE_PLLQ;
|
||||||
if (HAL_RCCEx_PeriphCLKConfig(&PeriphClkInitStruct) != HAL_OK)
|
if (HAL_RCCEx_PeriphCLKConfig(&PeriphClkInitStruct) != HAL_OK)
|
||||||
{
|
{
|
||||||
|
|
|
||||||
|
|
@ -2180,6 +2180,9 @@
|
||||||
<file>
|
<file>
|
||||||
<name>$PROJ_DIR$\..\..\..\components\drivers\src\workqueue.c</name>
|
<name>$PROJ_DIR$\..\..\..\components\drivers\src\workqueue.c</name>
|
||||||
</file>
|
</file>
|
||||||
|
<file>
|
||||||
|
<name>$PROJ_DIR$\..\..\..\components\drivers\watchdog\watchdog.c</name>
|
||||||
|
</file>
|
||||||
</group>
|
</group>
|
||||||
<group>
|
<group>
|
||||||
<name>finsh</name>
|
<name>finsh</name>
|
||||||
|
|
@ -2252,5 +2255,11 @@
|
||||||
<file>
|
<file>
|
||||||
<name>$PROJ_DIR$\..\libraries\STM32F4xx_HAL\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_usart.c</name>
|
<name>$PROJ_DIR$\..\libraries\STM32F4xx_HAL\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_usart.c</name>
|
||||||
</file>
|
</file>
|
||||||
|
<file>
|
||||||
|
<name>$PROJ_DIR$\..\libraries\STM32F4xx_HAL\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_iwdg.c</name>
|
||||||
|
</file>
|
||||||
|
<file>
|
||||||
|
<name>$PROJ_DIR$\..\libraries\STM32F4xx_HAL\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_wwdg.c</name>
|
||||||
|
</file>
|
||||||
</group>
|
</group>
|
||||||
</project>
|
</project>
|
||||||
|
|
|
||||||
File diff suppressed because it is too large
Load Diff
|
|
@ -73,7 +73,7 @@
|
||||||
<LExpSel>0</LExpSel>
|
<LExpSel>0</LExpSel>
|
||||||
</OPTXL>
|
</OPTXL>
|
||||||
<OPTFL>
|
<OPTFL>
|
||||||
<tvExp>0</tvExp>
|
<tvExp>1</tvExp>
|
||||||
<tvExpOptDlg>0</tvExpOptDlg>
|
<tvExpOptDlg>0</tvExpOptDlg>
|
||||||
<IsCurrentTarget>1</IsCurrentTarget>
|
<IsCurrentTarget>1</IsCurrentTarget>
|
||||||
</OPTFL>
|
</OPTFL>
|
||||||
|
|
@ -140,7 +140,7 @@
|
||||||
<SetRegEntry>
|
<SetRegEntry>
|
||||||
<Number>0</Number>
|
<Number>0</Number>
|
||||||
<Key>ST-LINKIII-KEIL_SWO</Key>
|
<Key>ST-LINKIII-KEIL_SWO</Key>
|
||||||
<Name>-U-O206 -O206 -SF4000 -C0 -A0 -I0 -HNlocalhost -HP7184 -P2 -N00("ARM CoreSight SW-DP") -D00(2BA01477) -L00(0) -TO18 -TC10000000 -TP21 -TDS8007 -TDT0 -TDC1F -TIEFFFFFFFF -TIP8 -FO7 -FD20000000 -FC1000 -FN1 -FF0STM32F4xx_1536.FLM -FS08000000 -FL0180000 -FP0($$Device:STM32F413ZHTx$CMSIS\Flash\STM32F4xx_1536.FLM)</Name>
|
<Name>-U-O206 -O206 -SF10000 -C0 -A0 -I0 -HNlocalhost -HP7184 -P2 -N00("ARM CoreSight SW-DP (ARM Core") -D00(2BA01477) -L00(0) -TO131090 -TC10000000 -TT10000000 -TP21 -TDS8007 -TDT0 -TDC1F -TIEFFFFFFFF -TIP8 -FO15 -FD20000000 -FC1000 -FN1 -FF0STM32F4xx_1536.FLM -FS08000000 -FL0180000 -FP0($$Device:STM32F413ZHTx$CMSIS\Flash\STM32F4xx_1536.FLM)</Name>
|
||||||
</SetRegEntry>
|
</SetRegEntry>
|
||||||
<SetRegEntry>
|
<SetRegEntry>
|
||||||
<Number>0</Number>
|
<Number>0</Number>
|
||||||
|
|
@ -198,6 +198,7 @@
|
||||||
<pMultCmdsp></pMultCmdsp>
|
<pMultCmdsp></pMultCmdsp>
|
||||||
<DebugDescription>
|
<DebugDescription>
|
||||||
<Enable>1</Enable>
|
<Enable>1</Enable>
|
||||||
|
<EnableFlashSeq>0</EnableFlashSeq>
|
||||||
<EnableLog>0</EnableLog>
|
<EnableLog>0</EnableLog>
|
||||||
<Protocol>2</Protocol>
|
<Protocol>2</Protocol>
|
||||||
<DbgClock>10000000</DbgClock>
|
<DbgClock>10000000</DbgClock>
|
||||||
|
|
@ -663,6 +664,18 @@
|
||||||
<RteFlg>0</RteFlg>
|
<RteFlg>0</RteFlg>
|
||||||
<bShared>0</bShared>
|
<bShared>0</bShared>
|
||||||
</File>
|
</File>
|
||||||
|
<File>
|
||||||
|
<GroupNumber>5</GroupNumber>
|
||||||
|
<FileNumber>36</FileNumber>
|
||||||
|
<FileType>1</FileType>
|
||||||
|
<tvExp>0</tvExp>
|
||||||
|
<tvExpOptDlg>0</tvExpOptDlg>
|
||||||
|
<bDave2>0</bDave2>
|
||||||
|
<PathWithFileName>..\..\..\components\drivers\watchdog\watchdog.c</PathWithFileName>
|
||||||
|
<FilenameWithoutPath>watchdog.c</FilenameWithoutPath>
|
||||||
|
<RteFlg>0</RteFlg>
|
||||||
|
<bShared>0</bShared>
|
||||||
|
</File>
|
||||||
</Group>
|
</Group>
|
||||||
|
|
||||||
<Group>
|
<Group>
|
||||||
|
|
@ -673,7 +686,7 @@
|
||||||
<RteFlg>0</RteFlg>
|
<RteFlg>0</RteFlg>
|
||||||
<File>
|
<File>
|
||||||
<GroupNumber>6</GroupNumber>
|
<GroupNumber>6</GroupNumber>
|
||||||
<FileNumber>36</FileNumber>
|
<FileNumber>37</FileNumber>
|
||||||
<FileType>1</FileType>
|
<FileType>1</FileType>
|
||||||
<tvExp>0</tvExp>
|
<tvExp>0</tvExp>
|
||||||
<tvExpOptDlg>0</tvExpOptDlg>
|
<tvExpOptDlg>0</tvExpOptDlg>
|
||||||
|
|
@ -685,7 +698,7 @@
|
||||||
</File>
|
</File>
|
||||||
<File>
|
<File>
|
||||||
<GroupNumber>6</GroupNumber>
|
<GroupNumber>6</GroupNumber>
|
||||||
<FileNumber>37</FileNumber>
|
<FileNumber>38</FileNumber>
|
||||||
<FileType>1</FileType>
|
<FileType>1</FileType>
|
||||||
<tvExp>0</tvExp>
|
<tvExp>0</tvExp>
|
||||||
<tvExpOptDlg>0</tvExpOptDlg>
|
<tvExpOptDlg>0</tvExpOptDlg>
|
||||||
|
|
@ -697,7 +710,7 @@
|
||||||
</File>
|
</File>
|
||||||
<File>
|
<File>
|
||||||
<GroupNumber>6</GroupNumber>
|
<GroupNumber>6</GroupNumber>
|
||||||
<FileNumber>38</FileNumber>
|
<FileNumber>39</FileNumber>
|
||||||
<FileType>1</FileType>
|
<FileType>1</FileType>
|
||||||
<tvExp>0</tvExp>
|
<tvExp>0</tvExp>
|
||||||
<tvExpOptDlg>0</tvExpOptDlg>
|
<tvExpOptDlg>0</tvExpOptDlg>
|
||||||
|
|
@ -717,7 +730,7 @@
|
||||||
<RteFlg>0</RteFlg>
|
<RteFlg>0</RteFlg>
|
||||||
<File>
|
<File>
|
||||||
<GroupNumber>7</GroupNumber>
|
<GroupNumber>7</GroupNumber>
|
||||||
<FileNumber>39</FileNumber>
|
<FileNumber>40</FileNumber>
|
||||||
<FileType>1</FileType>
|
<FileType>1</FileType>
|
||||||
<tvExp>0</tvExp>
|
<tvExp>0</tvExp>
|
||||||
<tvExpOptDlg>0</tvExpOptDlg>
|
<tvExpOptDlg>0</tvExpOptDlg>
|
||||||
|
|
@ -737,7 +750,7 @@
|
||||||
<RteFlg>0</RteFlg>
|
<RteFlg>0</RteFlg>
|
||||||
<File>
|
<File>
|
||||||
<GroupNumber>8</GroupNumber>
|
<GroupNumber>8</GroupNumber>
|
||||||
<FileNumber>40</FileNumber>
|
<FileNumber>41</FileNumber>
|
||||||
<FileType>1</FileType>
|
<FileType>1</FileType>
|
||||||
<tvExp>0</tvExp>
|
<tvExp>0</tvExp>
|
||||||
<tvExpOptDlg>0</tvExpOptDlg>
|
<tvExpOptDlg>0</tvExpOptDlg>
|
||||||
|
|
@ -749,7 +762,7 @@
|
||||||
</File>
|
</File>
|
||||||
<File>
|
<File>
|
||||||
<GroupNumber>8</GroupNumber>
|
<GroupNumber>8</GroupNumber>
|
||||||
<FileNumber>41</FileNumber>
|
<FileNumber>42</FileNumber>
|
||||||
<FileType>1</FileType>
|
<FileType>1</FileType>
|
||||||
<tvExp>0</tvExp>
|
<tvExp>0</tvExp>
|
||||||
<tvExpOptDlg>0</tvExpOptDlg>
|
<tvExpOptDlg>0</tvExpOptDlg>
|
||||||
|
|
@ -761,7 +774,7 @@
|
||||||
</File>
|
</File>
|
||||||
<File>
|
<File>
|
||||||
<GroupNumber>8</GroupNumber>
|
<GroupNumber>8</GroupNumber>
|
||||||
<FileNumber>42</FileNumber>
|
<FileNumber>43</FileNumber>
|
||||||
<FileType>1</FileType>
|
<FileType>1</FileType>
|
||||||
<tvExp>0</tvExp>
|
<tvExp>0</tvExp>
|
||||||
<tvExpOptDlg>0</tvExpOptDlg>
|
<tvExpOptDlg>0</tvExpOptDlg>
|
||||||
|
|
@ -773,7 +786,7 @@
|
||||||
</File>
|
</File>
|
||||||
<File>
|
<File>
|
||||||
<GroupNumber>8</GroupNumber>
|
<GroupNumber>8</GroupNumber>
|
||||||
<FileNumber>43</FileNumber>
|
<FileNumber>44</FileNumber>
|
||||||
<FileType>1</FileType>
|
<FileType>1</FileType>
|
||||||
<tvExp>0</tvExp>
|
<tvExp>0</tvExp>
|
||||||
<tvExpOptDlg>0</tvExpOptDlg>
|
<tvExpOptDlg>0</tvExpOptDlg>
|
||||||
|
|
@ -785,7 +798,7 @@
|
||||||
</File>
|
</File>
|
||||||
<File>
|
<File>
|
||||||
<GroupNumber>8</GroupNumber>
|
<GroupNumber>8</GroupNumber>
|
||||||
<FileNumber>44</FileNumber>
|
<FileNumber>45</FileNumber>
|
||||||
<FileType>1</FileType>
|
<FileType>1</FileType>
|
||||||
<tvExp>0</tvExp>
|
<tvExp>0</tvExp>
|
||||||
<tvExpOptDlg>0</tvExpOptDlg>
|
<tvExpOptDlg>0</tvExpOptDlg>
|
||||||
|
|
@ -797,7 +810,7 @@
|
||||||
</File>
|
</File>
|
||||||
<File>
|
<File>
|
||||||
<GroupNumber>8</GroupNumber>
|
<GroupNumber>8</GroupNumber>
|
||||||
<FileNumber>45</FileNumber>
|
<FileNumber>46</FileNumber>
|
||||||
<FileType>1</FileType>
|
<FileType>1</FileType>
|
||||||
<tvExp>0</tvExp>
|
<tvExp>0</tvExp>
|
||||||
<tvExpOptDlg>0</tvExpOptDlg>
|
<tvExpOptDlg>0</tvExpOptDlg>
|
||||||
|
|
@ -809,7 +822,7 @@
|
||||||
</File>
|
</File>
|
||||||
<File>
|
<File>
|
||||||
<GroupNumber>8</GroupNumber>
|
<GroupNumber>8</GroupNumber>
|
||||||
<FileNumber>46</FileNumber>
|
<FileNumber>47</FileNumber>
|
||||||
<FileType>1</FileType>
|
<FileType>1</FileType>
|
||||||
<tvExp>0</tvExp>
|
<tvExp>0</tvExp>
|
||||||
<tvExpOptDlg>0</tvExpOptDlg>
|
<tvExpOptDlg>0</tvExpOptDlg>
|
||||||
|
|
@ -821,7 +834,7 @@
|
||||||
</File>
|
</File>
|
||||||
<File>
|
<File>
|
||||||
<GroupNumber>8</GroupNumber>
|
<GroupNumber>8</GroupNumber>
|
||||||
<FileNumber>47</FileNumber>
|
<FileNumber>48</FileNumber>
|
||||||
<FileType>1</FileType>
|
<FileType>1</FileType>
|
||||||
<tvExp>0</tvExp>
|
<tvExp>0</tvExp>
|
||||||
<tvExpOptDlg>0</tvExpOptDlg>
|
<tvExpOptDlg>0</tvExpOptDlg>
|
||||||
|
|
@ -833,7 +846,7 @@
|
||||||
</File>
|
</File>
|
||||||
<File>
|
<File>
|
||||||
<GroupNumber>8</GroupNumber>
|
<GroupNumber>8</GroupNumber>
|
||||||
<FileNumber>48</FileNumber>
|
<FileNumber>49</FileNumber>
|
||||||
<FileType>1</FileType>
|
<FileType>1</FileType>
|
||||||
<tvExp>0</tvExp>
|
<tvExp>0</tvExp>
|
||||||
<tvExpOptDlg>0</tvExpOptDlg>
|
<tvExpOptDlg>0</tvExpOptDlg>
|
||||||
|
|
@ -845,7 +858,7 @@
|
||||||
</File>
|
</File>
|
||||||
<File>
|
<File>
|
||||||
<GroupNumber>8</GroupNumber>
|
<GroupNumber>8</GroupNumber>
|
||||||
<FileNumber>49</FileNumber>
|
<FileNumber>50</FileNumber>
|
||||||
<FileType>1</FileType>
|
<FileType>1</FileType>
|
||||||
<tvExp>0</tvExp>
|
<tvExp>0</tvExp>
|
||||||
<tvExpOptDlg>0</tvExpOptDlg>
|
<tvExpOptDlg>0</tvExpOptDlg>
|
||||||
|
|
@ -857,7 +870,7 @@
|
||||||
</File>
|
</File>
|
||||||
<File>
|
<File>
|
||||||
<GroupNumber>8</GroupNumber>
|
<GroupNumber>8</GroupNumber>
|
||||||
<FileNumber>50</FileNumber>
|
<FileNumber>51</FileNumber>
|
||||||
<FileType>1</FileType>
|
<FileType>1</FileType>
|
||||||
<tvExp>0</tvExp>
|
<tvExp>0</tvExp>
|
||||||
<tvExpOptDlg>0</tvExpOptDlg>
|
<tvExpOptDlg>0</tvExpOptDlg>
|
||||||
|
|
@ -869,7 +882,7 @@
|
||||||
</File>
|
</File>
|
||||||
<File>
|
<File>
|
||||||
<GroupNumber>8</GroupNumber>
|
<GroupNumber>8</GroupNumber>
|
||||||
<FileNumber>51</FileNumber>
|
<FileNumber>52</FileNumber>
|
||||||
<FileType>1</FileType>
|
<FileType>1</FileType>
|
||||||
<tvExp>0</tvExp>
|
<tvExp>0</tvExp>
|
||||||
<tvExpOptDlg>0</tvExpOptDlg>
|
<tvExpOptDlg>0</tvExpOptDlg>
|
||||||
|
|
@ -881,7 +894,7 @@
|
||||||
</File>
|
</File>
|
||||||
<File>
|
<File>
|
||||||
<GroupNumber>8</GroupNumber>
|
<GroupNumber>8</GroupNumber>
|
||||||
<FileNumber>52</FileNumber>
|
<FileNumber>53</FileNumber>
|
||||||
<FileType>1</FileType>
|
<FileType>1</FileType>
|
||||||
<tvExp>0</tvExp>
|
<tvExp>0</tvExp>
|
||||||
<tvExpOptDlg>0</tvExpOptDlg>
|
<tvExpOptDlg>0</tvExpOptDlg>
|
||||||
|
|
@ -893,7 +906,7 @@
|
||||||
</File>
|
</File>
|
||||||
<File>
|
<File>
|
||||||
<GroupNumber>8</GroupNumber>
|
<GroupNumber>8</GroupNumber>
|
||||||
<FileNumber>53</FileNumber>
|
<FileNumber>54</FileNumber>
|
||||||
<FileType>1</FileType>
|
<FileType>1</FileType>
|
||||||
<tvExp>0</tvExp>
|
<tvExp>0</tvExp>
|
||||||
<tvExpOptDlg>0</tvExpOptDlg>
|
<tvExpOptDlg>0</tvExpOptDlg>
|
||||||
|
|
@ -905,7 +918,7 @@
|
||||||
</File>
|
</File>
|
||||||
<File>
|
<File>
|
||||||
<GroupNumber>8</GroupNumber>
|
<GroupNumber>8</GroupNumber>
|
||||||
<FileNumber>54</FileNumber>
|
<FileNumber>55</FileNumber>
|
||||||
<FileType>1</FileType>
|
<FileType>1</FileType>
|
||||||
<tvExp>0</tvExp>
|
<tvExp>0</tvExp>
|
||||||
<tvExpOptDlg>0</tvExpOptDlg>
|
<tvExpOptDlg>0</tvExpOptDlg>
|
||||||
|
|
@ -917,7 +930,7 @@
|
||||||
</File>
|
</File>
|
||||||
<File>
|
<File>
|
||||||
<GroupNumber>8</GroupNumber>
|
<GroupNumber>8</GroupNumber>
|
||||||
<FileNumber>55</FileNumber>
|
<FileNumber>56</FileNumber>
|
||||||
<FileType>1</FileType>
|
<FileType>1</FileType>
|
||||||
<tvExp>0</tvExp>
|
<tvExp>0</tvExp>
|
||||||
<tvExpOptDlg>0</tvExpOptDlg>
|
<tvExpOptDlg>0</tvExpOptDlg>
|
||||||
|
|
@ -929,7 +942,7 @@
|
||||||
</File>
|
</File>
|
||||||
<File>
|
<File>
|
||||||
<GroupNumber>8</GroupNumber>
|
<GroupNumber>8</GroupNumber>
|
||||||
<FileNumber>56</FileNumber>
|
<FileNumber>57</FileNumber>
|
||||||
<FileType>1</FileType>
|
<FileType>1</FileType>
|
||||||
<tvExp>0</tvExp>
|
<tvExp>0</tvExp>
|
||||||
<tvExpOptDlg>0</tvExpOptDlg>
|
<tvExpOptDlg>0</tvExpOptDlg>
|
||||||
|
|
@ -939,6 +952,30 @@
|
||||||
<RteFlg>0</RteFlg>
|
<RteFlg>0</RteFlg>
|
||||||
<bShared>0</bShared>
|
<bShared>0</bShared>
|
||||||
</File>
|
</File>
|
||||||
|
<File>
|
||||||
|
<GroupNumber>8</GroupNumber>
|
||||||
|
<FileNumber>58</FileNumber>
|
||||||
|
<FileType>1</FileType>
|
||||||
|
<tvExp>0</tvExp>
|
||||||
|
<tvExpOptDlg>0</tvExpOptDlg>
|
||||||
|
<bDave2>0</bDave2>
|
||||||
|
<PathWithFileName>..\libraries\STM32F4xx_HAL\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_iwdg.c</PathWithFileName>
|
||||||
|
<FilenameWithoutPath>stm32f4xx_hal_iwdg.c</FilenameWithoutPath>
|
||||||
|
<RteFlg>0</RteFlg>
|
||||||
|
<bShared>0</bShared>
|
||||||
|
</File>
|
||||||
|
<File>
|
||||||
|
<GroupNumber>8</GroupNumber>
|
||||||
|
<FileNumber>59</FileNumber>
|
||||||
|
<FileType>1</FileType>
|
||||||
|
<tvExp>0</tvExp>
|
||||||
|
<tvExpOptDlg>0</tvExpOptDlg>
|
||||||
|
<bDave2>0</bDave2>
|
||||||
|
<PathWithFileName>..\libraries\STM32F4xx_HAL\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_wwdg.c</PathWithFileName>
|
||||||
|
<FilenameWithoutPath>stm32f4xx_hal_wwdg.c</FilenameWithoutPath>
|
||||||
|
<RteFlg>0</RteFlg>
|
||||||
|
<bShared>0</bShared>
|
||||||
|
</File>
|
||||||
</Group>
|
</Group>
|
||||||
|
|
||||||
</ProjectOpt>
|
</ProjectOpt>
|
||||||
|
|
|
||||||
|
|
@ -1,10 +1,7 @@
|
||||||
<?xml version="1.0" encoding="UTF-8" standalone="no" ?>
|
<?xml version="1.0" encoding="UTF-8" standalone="no" ?>
|
||||||
<Project xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:noNamespaceSchemaLocation="project_proj.xsd">
|
<Project xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:noNamespaceSchemaLocation="project_proj.xsd">
|
||||||
|
|
||||||
<SchemaVersion>1.1</SchemaVersion>
|
<SchemaVersion>1.1</SchemaVersion>
|
||||||
|
|
||||||
<Header>### uVision Project, (C) Keil Software</Header>
|
<Header>### uVision Project, (C) Keil Software</Header>
|
||||||
|
|
||||||
<Targets>
|
<Targets>
|
||||||
<Target>
|
<Target>
|
||||||
<TargetName>rt-thread</TargetName>
|
<TargetName>rt-thread</TargetName>
|
||||||
|
|
@ -15,25 +12,26 @@
|
||||||
<Device>STM32F407ZG</Device>
|
<Device>STM32F407ZG</Device>
|
||||||
<Vendor>STMicroelectronics</Vendor>
|
<Vendor>STMicroelectronics</Vendor>
|
||||||
<Cpu>IRAM(0x20000000-0x2001FFFF) IRAM2(0x10000000-0x1000FFFF) IROM(0x8000000-0x80FFFFF) CLOCK(25000000) CPUTYPE("Cortex-M4") FPU2</Cpu>
|
<Cpu>IRAM(0x20000000-0x2001FFFF) IRAM2(0x10000000-0x1000FFFF) IROM(0x8000000-0x80FFFFF) CLOCK(25000000) CPUTYPE("Cortex-M4") FPU2</Cpu>
|
||||||
<FlashUtilSpec></FlashUtilSpec>
|
<FlashUtilSpec />
|
||||||
<StartupFile>"Startup\ST\STM32F4xx\startup_stm32f40_41xxx.s" ("STM32F40/41xxx Startup Code")</StartupFile>
|
<StartupFile>"Startup\ST\STM32F4xx\startup_stm32f40_41xxx.s" ("STM32F40/41xxx Startup Code")</StartupFile>
|
||||||
<FlashDriverDll>UL2CM3(-O207 -S0 -C0 -FO7 -FD20000000 -FC800 -FN1 -FF0STM32F4xx_1024 -FS08000000 -FL0100000)</FlashDriverDll>
|
<FlashDriverDll>UL2CM3(-O207 -S0 -C0 -FO7 -FD20000000 -FC800 -FN1 -FF0STM32F4xx_1024 -FS08000000 -FL0100000)</FlashDriverDll>
|
||||||
<DeviceId>6105</DeviceId>
|
<DeviceId>6105</DeviceId>
|
||||||
<RegisterFile>stm32f4xx.h</RegisterFile>
|
<RegisterFile>stm32f4xx.h</RegisterFile>
|
||||||
<MemoryEnv></MemoryEnv>
|
<MemoryEnv />
|
||||||
<Cmp></Cmp>
|
<Cmp />
|
||||||
<Asm></Asm>
|
<Asm />
|
||||||
<Linker></Linker>
|
<Linker />
|
||||||
<OHString></OHString>
|
<OHString />
|
||||||
<InfinionOptionDll></InfinionOptionDll>
|
<InfinionOptionDll />
|
||||||
<SLE66CMisc>-DSTM32F40_41xxx</SLE66CMisc>
|
<SLE66CMisc>-DSTM32F40_41xxx</SLE66CMisc>
|
||||||
<SLE66AMisc></SLE66AMisc>
|
<SLE66AMisc />
|
||||||
<SLE66LinkerMisc></SLE66LinkerMisc>
|
<SLE66LinkerMisc />
|
||||||
<SFDFile>SFD\ST\STM32F4xx\STM32F40x.sfr</SFDFile>
|
<SFDFile>SFD\ST\STM32F4xx\STM32F40x.sfr</SFDFile>
|
||||||
|
<bCustSvd>0</bCustSvd>
|
||||||
<UseEnv>0</UseEnv>
|
<UseEnv>0</UseEnv>
|
||||||
<BinPath></BinPath>
|
<BinPath />
|
||||||
<IncludePath></IncludePath>
|
<IncludePath />
|
||||||
<LibPath></LibPath>
|
<LibPath />
|
||||||
<RegisterFilePath>ST\STM32F4xx\</RegisterFilePath>
|
<RegisterFilePath>ST\STM32F4xx\</RegisterFilePath>
|
||||||
<DBRegisterFilePath>ST\STM32F4xx\</DBRegisterFilePath>
|
<DBRegisterFilePath>ST\STM32F4xx\</DBRegisterFilePath>
|
||||||
<TargetStatus>
|
<TargetStatus>
|
||||||
|
|
@ -57,8 +55,8 @@
|
||||||
<BeforeCompile>
|
<BeforeCompile>
|
||||||
<RunUserProg1>0</RunUserProg1>
|
<RunUserProg1>0</RunUserProg1>
|
||||||
<RunUserProg2>0</RunUserProg2>
|
<RunUserProg2>0</RunUserProg2>
|
||||||
<UserProg1Name></UserProg1Name>
|
<UserProg1Name />
|
||||||
<UserProg2Name></UserProg2Name>
|
<UserProg2Name />
|
||||||
<UserProg1Dos16Mode>0</UserProg1Dos16Mode>
|
<UserProg1Dos16Mode>0</UserProg1Dos16Mode>
|
||||||
<UserProg2Dos16Mode>0</UserProg2Dos16Mode>
|
<UserProg2Dos16Mode>0</UserProg2Dos16Mode>
|
||||||
<nStopU1X>0</nStopU1X>
|
<nStopU1X>0</nStopU1X>
|
||||||
|
|
@ -67,8 +65,8 @@
|
||||||
<BeforeMake>
|
<BeforeMake>
|
||||||
<RunUserProg1>0</RunUserProg1>
|
<RunUserProg1>0</RunUserProg1>
|
||||||
<RunUserProg2>0</RunUserProg2>
|
<RunUserProg2>0</RunUserProg2>
|
||||||
<UserProg1Name></UserProg1Name>
|
<UserProg1Name />
|
||||||
<UserProg2Name></UserProg2Name>
|
<UserProg2Name />
|
||||||
<UserProg1Dos16Mode>0</UserProg1Dos16Mode>
|
<UserProg1Dos16Mode>0</UserProg1Dos16Mode>
|
||||||
<UserProg2Dos16Mode>0</UserProg2Dos16Mode>
|
<UserProg2Dos16Mode>0</UserProg2Dos16Mode>
|
||||||
</BeforeMake>
|
</BeforeMake>
|
||||||
|
|
@ -76,12 +74,12 @@
|
||||||
<RunUserProg1>1</RunUserProg1>
|
<RunUserProg1>1</RunUserProg1>
|
||||||
<RunUserProg2>0</RunUserProg2>
|
<RunUserProg2>0</RunUserProg2>
|
||||||
<UserProg1Name>fromelf --bin !L --output rtthread.bin</UserProg1Name>
|
<UserProg1Name>fromelf --bin !L --output rtthread.bin</UserProg1Name>
|
||||||
<UserProg2Name></UserProg2Name>
|
<UserProg2Name />
|
||||||
<UserProg1Dos16Mode>0</UserProg1Dos16Mode>
|
<UserProg1Dos16Mode>0</UserProg1Dos16Mode>
|
||||||
<UserProg2Dos16Mode>0</UserProg2Dos16Mode>
|
<UserProg2Dos16Mode>0</UserProg2Dos16Mode>
|
||||||
</AfterMake>
|
</AfterMake>
|
||||||
<SelectedForBatchBuild>0</SelectedForBatchBuild>
|
<SelectedForBatchBuild>0</SelectedForBatchBuild>
|
||||||
<SVCSIdString></SVCSIdString>
|
<SVCSIdString />
|
||||||
</TargetCommonOption>
|
</TargetCommonOption>
|
||||||
<CommonProperty>
|
<CommonProperty>
|
||||||
<UseCPPCompiler>0</UseCPPCompiler>
|
<UseCPPCompiler>0</UseCPPCompiler>
|
||||||
|
|
@ -95,8 +93,9 @@
|
||||||
<AssembleAssemblyFile>0</AssembleAssemblyFile>
|
<AssembleAssemblyFile>0</AssembleAssemblyFile>
|
||||||
<PublicsOnly>0</PublicsOnly>
|
<PublicsOnly>0</PublicsOnly>
|
||||||
<StopOnExitCode>3</StopOnExitCode>
|
<StopOnExitCode>3</StopOnExitCode>
|
||||||
<CustomArgument></CustomArgument>
|
<CustomArgument />
|
||||||
<IncludeLibraryModules></IncludeLibraryModules>
|
<IncludeLibraryModules />
|
||||||
|
<ComprImg>1</ComprImg>
|
||||||
</CommonProperty>
|
</CommonProperty>
|
||||||
<DllOption>
|
<DllOption>
|
||||||
<SimDllName>SARMCM3.DLL</SimDllName>
|
<SimDllName>SARMCM3.DLL</SimDllName>
|
||||||
|
|
@ -126,6 +125,7 @@
|
||||||
<RestoreFunctions>1</RestoreFunctions>
|
<RestoreFunctions>1</RestoreFunctions>
|
||||||
<RestoreToolbox>1</RestoreToolbox>
|
<RestoreToolbox>1</RestoreToolbox>
|
||||||
<LimitSpeedToRealTime>0</LimitSpeedToRealTime>
|
<LimitSpeedToRealTime>0</LimitSpeedToRealTime>
|
||||||
|
<RestoreSysVw>1</RestoreSysVw>
|
||||||
</Simulator>
|
</Simulator>
|
||||||
<Target>
|
<Target>
|
||||||
<UseTarget>1</UseTarget>
|
<UseTarget>1</UseTarget>
|
||||||
|
|
@ -137,22 +137,24 @@
|
||||||
<RestoreFunctions>0</RestoreFunctions>
|
<RestoreFunctions>0</RestoreFunctions>
|
||||||
<RestoreToolbox>1</RestoreToolbox>
|
<RestoreToolbox>1</RestoreToolbox>
|
||||||
<RestoreTracepoints>0</RestoreTracepoints>
|
<RestoreTracepoints>0</RestoreTracepoints>
|
||||||
|
<RestoreSysVw>1</RestoreSysVw>
|
||||||
|
<UsePdscDebugDescription>0</UsePdscDebugDescription>
|
||||||
</Target>
|
</Target>
|
||||||
<RunDebugAfterBuild>0</RunDebugAfterBuild>
|
<RunDebugAfterBuild>0</RunDebugAfterBuild>
|
||||||
<TargetSelection>7</TargetSelection>
|
<TargetSelection>6</TargetSelection>
|
||||||
<SimDlls>
|
<SimDlls>
|
||||||
<CpuDll></CpuDll>
|
<CpuDll />
|
||||||
<CpuDllArguments></CpuDllArguments>
|
<CpuDllArguments />
|
||||||
<PeripheralDll></PeripheralDll>
|
<PeripheralDll />
|
||||||
<PeripheralDllArguments></PeripheralDllArguments>
|
<PeripheralDllArguments />
|
||||||
<InitializationFile></InitializationFile>
|
<InitializationFile />
|
||||||
</SimDlls>
|
</SimDlls>
|
||||||
<TargetDlls>
|
<TargetDlls>
|
||||||
<CpuDll></CpuDll>
|
<CpuDll />
|
||||||
<CpuDllArguments></CpuDllArguments>
|
<CpuDllArguments />
|
||||||
<PeripheralDll></PeripheralDll>
|
<PeripheralDll />
|
||||||
<PeripheralDllArguments></PeripheralDllArguments>
|
<PeripheralDllArguments />
|
||||||
<InitializationFile></InitializationFile>
|
<InitializationFile />
|
||||||
<Driver>Segger\JL2CM3.dll</Driver>
|
<Driver>Segger\JL2CM3.dll</Driver>
|
||||||
</TargetDlls>
|
</TargetDlls>
|
||||||
</DebugOption>
|
</DebugOption>
|
||||||
|
|
@ -165,9 +167,14 @@
|
||||||
<Capability>1</Capability>
|
<Capability>1</Capability>
|
||||||
<DriverSelection>4096</DriverSelection>
|
<DriverSelection>4096</DriverSelection>
|
||||||
</Flash1>
|
</Flash1>
|
||||||
|
<bUseTDR>1</bUseTDR>
|
||||||
<Flash2>BIN\UL2CM3.DLL</Flash2>
|
<Flash2>BIN\UL2CM3.DLL</Flash2>
|
||||||
<Flash3>"" ()</Flash3>
|
<Flash3>"" ()</Flash3>
|
||||||
<Flash4></Flash4>
|
<Flash4 />
|
||||||
|
<pFcarmOut />
|
||||||
|
<pFcarmGrp />
|
||||||
|
<pFcArmRoot />
|
||||||
|
<FcArmLst>0</FcArmLst>
|
||||||
</Utilities>
|
</Utilities>
|
||||||
<TargetArmAds>
|
<TargetArmAds>
|
||||||
<ArmAdsMisc>
|
<ArmAdsMisc>
|
||||||
|
|
@ -199,7 +206,7 @@
|
||||||
<RvctClst>0</RvctClst>
|
<RvctClst>0</RvctClst>
|
||||||
<GenPPlst>0</GenPPlst>
|
<GenPPlst>0</GenPPlst>
|
||||||
<AdsCpuType>"Cortex-M4"</AdsCpuType>
|
<AdsCpuType>"Cortex-M4"</AdsCpuType>
|
||||||
<RvctDeviceName></RvctDeviceName>
|
<RvctDeviceName />
|
||||||
<mOS>0</mOS>
|
<mOS>0</mOS>
|
||||||
<uocRom>0</uocRom>
|
<uocRom>0</uocRom>
|
||||||
<uocRam>0</uocRam>
|
<uocRam>0</uocRam>
|
||||||
|
|
@ -330,7 +337,7 @@
|
||||||
<Size>0x10000</Size>
|
<Size>0x10000</Size>
|
||||||
</OCR_RVCT10>
|
</OCR_RVCT10>
|
||||||
</OnChipMemories>
|
</OnChipMemories>
|
||||||
<RvctStartVector></RvctStartVector>
|
<RvctStartVector />
|
||||||
</ArmAdsMisc>
|
</ArmAdsMisc>
|
||||||
<Cads>
|
<Cads>
|
||||||
<interw>1</interw>
|
<interw>1</interw>
|
||||||
|
|
@ -346,11 +353,13 @@
|
||||||
<wLevel>0</wLevel>
|
<wLevel>0</wLevel>
|
||||||
<uThumb>0</uThumb>
|
<uThumb>0</uThumb>
|
||||||
<uSurpInc>0</uSurpInc>
|
<uSurpInc>0</uSurpInc>
|
||||||
|
<uC99>1</uC99>
|
||||||
|
<useXO>0</useXO>
|
||||||
<VariousControls>
|
<VariousControls>
|
||||||
<MiscControls></MiscControls>
|
<MiscControls />
|
||||||
<Define>USE_HAL_DRIVER, STM32F413xx</Define>
|
<Define>USE_HAL_DRIVER, STM32F413xx</Define>
|
||||||
<Undefine></Undefine>
|
<Undefine />
|
||||||
<IncludePath>.;..\..\..\include;applications;.;board;board\CubeMX_Config\Inc;..\libraries\HAL_Drivers;..\libraries\HAL_Drivers\config;..\..\..\libcpu\arm\common;..\..\..\libcpu\arm\cortex-m4;..\..\..\components\drivers\include;..\..\..\components\drivers\include;..\..\..\components\drivers\include;..\..\..\components\finsh;..\..\..\components\libc\compilers\common;..\libraries\STM32F4xx_HAL\STM32F4xx_HAL_Driver\Inc;..\libraries\STM32F4xx_HAL\CMSIS\Device\ST\STM32F4xx\Include;..\libraries\STM32F4xx_HAL\CMSIS\Include</IncludePath>
|
<IncludePath>.;..\..\..\include;applications;.;board;board\CubeMX_Config\Inc;..\libraries\HAL_Drivers;..\libraries\HAL_Drivers\config;..\..\..\libcpu\arm\common;..\..\..\libcpu\arm\cortex-m4;..\..\..\components\drivers\include;..\..\..\components\drivers\include;..\..\..\components\drivers\include;..\..\..\components\drivers\include;..\..\..\components\finsh;..\..\..\components\libc\compilers\common;..\libraries\STM32F4xx_HAL\STM32F4xx_HAL_Driver\Inc;..\libraries\STM32F4xx_HAL\CMSIS\Device\ST\STM32F4xx\Include;..\libraries\STM32F4xx_HAL\CMSIS\Include</IncludePath>
|
||||||
</VariousControls>
|
</VariousControls>
|
||||||
</Cads>
|
</Cads>
|
||||||
<Aads>
|
<Aads>
|
||||||
|
|
@ -362,11 +371,12 @@
|
||||||
<SwStkChk>0</SwStkChk>
|
<SwStkChk>0</SwStkChk>
|
||||||
<NoWarn>0</NoWarn>
|
<NoWarn>0</NoWarn>
|
||||||
<uSurpInc>0</uSurpInc>
|
<uSurpInc>0</uSurpInc>
|
||||||
|
<useXO>0</useXO>
|
||||||
<VariousControls>
|
<VariousControls>
|
||||||
<MiscControls></MiscControls>
|
<MiscControls />
|
||||||
<Define></Define>
|
<Define />
|
||||||
<Undefine></Undefine>
|
<Undefine />
|
||||||
<IncludePath></IncludePath>
|
<IncludePath />
|
||||||
</VariousControls>
|
</VariousControls>
|
||||||
</Aads>
|
</Aads>
|
||||||
<LDads>
|
<LDads>
|
||||||
|
|
@ -378,12 +388,13 @@
|
||||||
<useFile>0</useFile>
|
<useFile>0</useFile>
|
||||||
<TextAddressRange>0x08000000</TextAddressRange>
|
<TextAddressRange>0x08000000</TextAddressRange>
|
||||||
<DataAddressRange>0x20000000</DataAddressRange>
|
<DataAddressRange>0x20000000</DataAddressRange>
|
||||||
|
<pXoBase />
|
||||||
<ScatterFile>.\board\linker_scripts\link.sct</ScatterFile>
|
<ScatterFile>.\board\linker_scripts\link.sct</ScatterFile>
|
||||||
<IncludeLibs></IncludeLibs>
|
<IncludeLibs />
|
||||||
<IncludeLibsPath></IncludeLibsPath>
|
<IncludeLibsPath />
|
||||||
<Misc></Misc>
|
<Misc />
|
||||||
<LinkerInputFile></LinkerInputFile>
|
<LinkerInputFile />
|
||||||
<DisabledWarnings></DisabledWarnings>
|
<DisabledWarnings />
|
||||||
</LDads>
|
</LDads>
|
||||||
</TargetArmAds>
|
</TargetArmAds>
|
||||||
</TargetOption>
|
</TargetOption>
|
||||||
|
|
@ -396,66 +407,92 @@
|
||||||
<FileType>1</FileType>
|
<FileType>1</FileType>
|
||||||
<FilePath>..\..\..\src\clock.c</FilePath>
|
<FilePath>..\..\..\src\clock.c</FilePath>
|
||||||
</File>
|
</File>
|
||||||
|
</Files>
|
||||||
|
<Files>
|
||||||
<File>
|
<File>
|
||||||
<FileName>components.c</FileName>
|
<FileName>components.c</FileName>
|
||||||
<FileType>1</FileType>
|
<FileType>1</FileType>
|
||||||
<FilePath>..\..\..\src\components.c</FilePath>
|
<FilePath>..\..\..\src\components.c</FilePath>
|
||||||
</File>
|
</File>
|
||||||
|
</Files>
|
||||||
|
<Files>
|
||||||
<File>
|
<File>
|
||||||
<FileName>device.c</FileName>
|
<FileName>device.c</FileName>
|
||||||
<FileType>1</FileType>
|
<FileType>1</FileType>
|
||||||
<FilePath>..\..\..\src\device.c</FilePath>
|
<FilePath>..\..\..\src\device.c</FilePath>
|
||||||
</File>
|
</File>
|
||||||
|
</Files>
|
||||||
|
<Files>
|
||||||
<File>
|
<File>
|
||||||
<FileName>idle.c</FileName>
|
<FileName>idle.c</FileName>
|
||||||
<FileType>1</FileType>
|
<FileType>1</FileType>
|
||||||
<FilePath>..\..\..\src\idle.c</FilePath>
|
<FilePath>..\..\..\src\idle.c</FilePath>
|
||||||
</File>
|
</File>
|
||||||
|
</Files>
|
||||||
|
<Files>
|
||||||
<File>
|
<File>
|
||||||
<FileName>ipc.c</FileName>
|
<FileName>ipc.c</FileName>
|
||||||
<FileType>1</FileType>
|
<FileType>1</FileType>
|
||||||
<FilePath>..\..\..\src\ipc.c</FilePath>
|
<FilePath>..\..\..\src\ipc.c</FilePath>
|
||||||
</File>
|
</File>
|
||||||
|
</Files>
|
||||||
|
<Files>
|
||||||
<File>
|
<File>
|
||||||
<FileName>irq.c</FileName>
|
<FileName>irq.c</FileName>
|
||||||
<FileType>1</FileType>
|
<FileType>1</FileType>
|
||||||
<FilePath>..\..\..\src\irq.c</FilePath>
|
<FilePath>..\..\..\src\irq.c</FilePath>
|
||||||
</File>
|
</File>
|
||||||
|
</Files>
|
||||||
|
<Files>
|
||||||
<File>
|
<File>
|
||||||
<FileName>kservice.c</FileName>
|
<FileName>kservice.c</FileName>
|
||||||
<FileType>1</FileType>
|
<FileType>1</FileType>
|
||||||
<FilePath>..\..\..\src\kservice.c</FilePath>
|
<FilePath>..\..\..\src\kservice.c</FilePath>
|
||||||
</File>
|
</File>
|
||||||
|
</Files>
|
||||||
|
<Files>
|
||||||
<File>
|
<File>
|
||||||
<FileName>mem.c</FileName>
|
<FileName>mem.c</FileName>
|
||||||
<FileType>1</FileType>
|
<FileType>1</FileType>
|
||||||
<FilePath>..\..\..\src\mem.c</FilePath>
|
<FilePath>..\..\..\src\mem.c</FilePath>
|
||||||
</File>
|
</File>
|
||||||
|
</Files>
|
||||||
|
<Files>
|
||||||
<File>
|
<File>
|
||||||
<FileName>mempool.c</FileName>
|
<FileName>mempool.c</FileName>
|
||||||
<FileType>1</FileType>
|
<FileType>1</FileType>
|
||||||
<FilePath>..\..\..\src\mempool.c</FilePath>
|
<FilePath>..\..\..\src\mempool.c</FilePath>
|
||||||
</File>
|
</File>
|
||||||
|
</Files>
|
||||||
|
<Files>
|
||||||
<File>
|
<File>
|
||||||
<FileName>object.c</FileName>
|
<FileName>object.c</FileName>
|
||||||
<FileType>1</FileType>
|
<FileType>1</FileType>
|
||||||
<FilePath>..\..\..\src\object.c</FilePath>
|
<FilePath>..\..\..\src\object.c</FilePath>
|
||||||
</File>
|
</File>
|
||||||
|
</Files>
|
||||||
|
<Files>
|
||||||
<File>
|
<File>
|
||||||
<FileName>scheduler.c</FileName>
|
<FileName>scheduler.c</FileName>
|
||||||
<FileType>1</FileType>
|
<FileType>1</FileType>
|
||||||
<FilePath>..\..\..\src\scheduler.c</FilePath>
|
<FilePath>..\..\..\src\scheduler.c</FilePath>
|
||||||
</File>
|
</File>
|
||||||
|
</Files>
|
||||||
|
<Files>
|
||||||
<File>
|
<File>
|
||||||
<FileName>signal.c</FileName>
|
<FileName>signal.c</FileName>
|
||||||
<FileType>1</FileType>
|
<FileType>1</FileType>
|
||||||
<FilePath>..\..\..\src\signal.c</FilePath>
|
<FilePath>..\..\..\src\signal.c</FilePath>
|
||||||
</File>
|
</File>
|
||||||
|
</Files>
|
||||||
|
<Files>
|
||||||
<File>
|
<File>
|
||||||
<FileName>thread.c</FileName>
|
<FileName>thread.c</FileName>
|
||||||
<FileType>1</FileType>
|
<FileType>1</FileType>
|
||||||
<FilePath>..\..\..\src\thread.c</FilePath>
|
<FilePath>..\..\..\src\thread.c</FilePath>
|
||||||
</File>
|
</File>
|
||||||
|
</Files>
|
||||||
|
<Files>
|
||||||
<File>
|
<File>
|
||||||
<FileName>timer.c</FileName>
|
<FileName>timer.c</FileName>
|
||||||
<FileType>1</FileType>
|
<FileType>1</FileType>
|
||||||
|
|
@ -481,26 +518,36 @@
|
||||||
<FileType>1</FileType>
|
<FileType>1</FileType>
|
||||||
<FilePath>board\board.c</FilePath>
|
<FilePath>board\board.c</FilePath>
|
||||||
</File>
|
</File>
|
||||||
|
</Files>
|
||||||
|
<Files>
|
||||||
<File>
|
<File>
|
||||||
<FileName>stm32f4xx_hal_msp.c</FileName>
|
<FileName>stm32f4xx_hal_msp.c</FileName>
|
||||||
<FileType>1</FileType>
|
<FileType>1</FileType>
|
||||||
<FilePath>board\CubeMX_Config\Src\stm32f4xx_hal_msp.c</FilePath>
|
<FilePath>board\CubeMX_Config\Src\stm32f4xx_hal_msp.c</FilePath>
|
||||||
</File>
|
</File>
|
||||||
|
</Files>
|
||||||
|
<Files>
|
||||||
<File>
|
<File>
|
||||||
<FileName>startup_stm32f413xx.s</FileName>
|
<FileName>startup_stm32f413xx.s</FileName>
|
||||||
<FileType>2</FileType>
|
<FileType>2</FileType>
|
||||||
<FilePath>..\libraries\STM32F4xx_HAL\CMSIS\Device\ST\STM32F4xx\Source\Templates\arm\startup_stm32f413xx.s</FilePath>
|
<FilePath>..\libraries\STM32F4xx_HAL\CMSIS\Device\ST\STM32F4xx\Source\Templates\arm\startup_stm32f413xx.s</FilePath>
|
||||||
</File>
|
</File>
|
||||||
|
</Files>
|
||||||
|
<Files>
|
||||||
<File>
|
<File>
|
||||||
<FileName>drv_gpio.c</FileName>
|
<FileName>drv_gpio.c</FileName>
|
||||||
<FileType>1</FileType>
|
<FileType>1</FileType>
|
||||||
<FilePath>..\libraries\HAL_Drivers\drv_gpio.c</FilePath>
|
<FilePath>..\libraries\HAL_Drivers\drv_gpio.c</FilePath>
|
||||||
</File>
|
</File>
|
||||||
|
</Files>
|
||||||
|
<Files>
|
||||||
<File>
|
<File>
|
||||||
<FileName>drv_usart.c</FileName>
|
<FileName>drv_usart.c</FileName>
|
||||||
<FileType>1</FileType>
|
<FileType>1</FileType>
|
||||||
<FilePath>..\libraries\HAL_Drivers\drv_usart.c</FilePath>
|
<FilePath>..\libraries\HAL_Drivers\drv_usart.c</FilePath>
|
||||||
</File>
|
</File>
|
||||||
|
</Files>
|
||||||
|
<Files>
|
||||||
<File>
|
<File>
|
||||||
<FileName>drv_common.c</FileName>
|
<FileName>drv_common.c</FileName>
|
||||||
<FileType>1</FileType>
|
<FileType>1</FileType>
|
||||||
|
|
@ -516,21 +563,29 @@
|
||||||
<FileType>1</FileType>
|
<FileType>1</FileType>
|
||||||
<FilePath>..\..\..\libcpu\arm\common\backtrace.c</FilePath>
|
<FilePath>..\..\..\libcpu\arm\common\backtrace.c</FilePath>
|
||||||
</File>
|
</File>
|
||||||
|
</Files>
|
||||||
|
<Files>
|
||||||
<File>
|
<File>
|
||||||
<FileName>div0.c</FileName>
|
<FileName>div0.c</FileName>
|
||||||
<FileType>1</FileType>
|
<FileType>1</FileType>
|
||||||
<FilePath>..\..\..\libcpu\arm\common\div0.c</FilePath>
|
<FilePath>..\..\..\libcpu\arm\common\div0.c</FilePath>
|
||||||
</File>
|
</File>
|
||||||
|
</Files>
|
||||||
|
<Files>
|
||||||
<File>
|
<File>
|
||||||
<FileName>showmem.c</FileName>
|
<FileName>showmem.c</FileName>
|
||||||
<FileType>1</FileType>
|
<FileType>1</FileType>
|
||||||
<FilePath>..\..\..\libcpu\arm\common\showmem.c</FilePath>
|
<FilePath>..\..\..\libcpu\arm\common\showmem.c</FilePath>
|
||||||
</File>
|
</File>
|
||||||
|
</Files>
|
||||||
|
<Files>
|
||||||
<File>
|
<File>
|
||||||
<FileName>cpuport.c</FileName>
|
<FileName>cpuport.c</FileName>
|
||||||
<FileType>1</FileType>
|
<FileType>1</FileType>
|
||||||
<FilePath>..\..\..\libcpu\arm\cortex-m4\cpuport.c</FilePath>
|
<FilePath>..\..\..\libcpu\arm\cortex-m4\cpuport.c</FilePath>
|
||||||
</File>
|
</File>
|
||||||
|
</Files>
|
||||||
|
<Files>
|
||||||
<File>
|
<File>
|
||||||
<FileName>context_rvds.S</FileName>
|
<FileName>context_rvds.S</FileName>
|
||||||
<FileType>2</FileType>
|
<FileType>2</FileType>
|
||||||
|
|
@ -546,47 +601,70 @@
|
||||||
<FileType>1</FileType>
|
<FileType>1</FileType>
|
||||||
<FilePath>..\..\..\components\drivers\misc\pin.c</FilePath>
|
<FilePath>..\..\..\components\drivers\misc\pin.c</FilePath>
|
||||||
</File>
|
</File>
|
||||||
|
</Files>
|
||||||
|
<Files>
|
||||||
<File>
|
<File>
|
||||||
<FileName>serial.c</FileName>
|
<FileName>serial.c</FileName>
|
||||||
<FileType>1</FileType>
|
<FileType>1</FileType>
|
||||||
<FilePath>..\..\..\components\drivers\serial\serial.c</FilePath>
|
<FilePath>..\..\..\components\drivers\serial\serial.c</FilePath>
|
||||||
</File>
|
</File>
|
||||||
|
</Files>
|
||||||
|
<Files>
|
||||||
<File>
|
<File>
|
||||||
<FileName>completion.c</FileName>
|
<FileName>completion.c</FileName>
|
||||||
<FileType>1</FileType>
|
<FileType>1</FileType>
|
||||||
<FilePath>..\..\..\components\drivers\src\completion.c</FilePath>
|
<FilePath>..\..\..\components\drivers\src\completion.c</FilePath>
|
||||||
</File>
|
</File>
|
||||||
|
</Files>
|
||||||
|
<Files>
|
||||||
<File>
|
<File>
|
||||||
<FileName>dataqueue.c</FileName>
|
<FileName>dataqueue.c</FileName>
|
||||||
<FileType>1</FileType>
|
<FileType>1</FileType>
|
||||||
<FilePath>..\..\..\components\drivers\src\dataqueue.c</FilePath>
|
<FilePath>..\..\..\components\drivers\src\dataqueue.c</FilePath>
|
||||||
</File>
|
</File>
|
||||||
|
</Files>
|
||||||
|
<Files>
|
||||||
<File>
|
<File>
|
||||||
<FileName>pipe.c</FileName>
|
<FileName>pipe.c</FileName>
|
||||||
<FileType>1</FileType>
|
<FileType>1</FileType>
|
||||||
<FilePath>..\..\..\components\drivers\src\pipe.c</FilePath>
|
<FilePath>..\..\..\components\drivers\src\pipe.c</FilePath>
|
||||||
</File>
|
</File>
|
||||||
|
</Files>
|
||||||
|
<Files>
|
||||||
<File>
|
<File>
|
||||||
<FileName>ringblk_buf.c</FileName>
|
<FileName>ringblk_buf.c</FileName>
|
||||||
<FileType>1</FileType>
|
<FileType>1</FileType>
|
||||||
<FilePath>..\..\..\components\drivers\src\ringblk_buf.c</FilePath>
|
<FilePath>..\..\..\components\drivers\src\ringblk_buf.c</FilePath>
|
||||||
</File>
|
</File>
|
||||||
|
</Files>
|
||||||
|
<Files>
|
||||||
<File>
|
<File>
|
||||||
<FileName>ringbuffer.c</FileName>
|
<FileName>ringbuffer.c</FileName>
|
||||||
<FileType>1</FileType>
|
<FileType>1</FileType>
|
||||||
<FilePath>..\..\..\components\drivers\src\ringbuffer.c</FilePath>
|
<FilePath>..\..\..\components\drivers\src\ringbuffer.c</FilePath>
|
||||||
</File>
|
</File>
|
||||||
|
</Files>
|
||||||
|
<Files>
|
||||||
<File>
|
<File>
|
||||||
<FileName>waitqueue.c</FileName>
|
<FileName>waitqueue.c</FileName>
|
||||||
<FileType>1</FileType>
|
<FileType>1</FileType>
|
||||||
<FilePath>..\..\..\components\drivers\src\waitqueue.c</FilePath>
|
<FilePath>..\..\..\components\drivers\src\waitqueue.c</FilePath>
|
||||||
</File>
|
</File>
|
||||||
|
</Files>
|
||||||
|
<Files>
|
||||||
<File>
|
<File>
|
||||||
<FileName>workqueue.c</FileName>
|
<FileName>workqueue.c</FileName>
|
||||||
<FileType>1</FileType>
|
<FileType>1</FileType>
|
||||||
<FilePath>..\..\..\components\drivers\src\workqueue.c</FilePath>
|
<FilePath>..\..\..\components\drivers\src\workqueue.c</FilePath>
|
||||||
</File>
|
</File>
|
||||||
</Files>
|
</Files>
|
||||||
|
<Files>
|
||||||
|
<File>
|
||||||
|
<FileName>watchdog.c</FileName>
|
||||||
|
<FileType>1</FileType>
|
||||||
|
<FilePath>..\..\..\components\drivers\watchdog\watchdog.c</FilePath>
|
||||||
|
</File>
|
||||||
|
</Files>
|
||||||
</Group>
|
</Group>
|
||||||
<Group>
|
<Group>
|
||||||
<GroupName>finsh</GroupName>
|
<GroupName>finsh</GroupName>
|
||||||
|
|
@ -596,11 +674,15 @@
|
||||||
<FileType>1</FileType>
|
<FileType>1</FileType>
|
||||||
<FilePath>..\..\..\components\finsh\shell.c</FilePath>
|
<FilePath>..\..\..\components\finsh\shell.c</FilePath>
|
||||||
</File>
|
</File>
|
||||||
|
</Files>
|
||||||
|
<Files>
|
||||||
<File>
|
<File>
|
||||||
<FileName>cmd.c</FileName>
|
<FileName>cmd.c</FileName>
|
||||||
<FileType>1</FileType>
|
<FileType>1</FileType>
|
||||||
<FilePath>..\..\..\components\finsh\cmd.c</FilePath>
|
<FilePath>..\..\..\components\finsh\cmd.c</FilePath>
|
||||||
</File>
|
</File>
|
||||||
|
</Files>
|
||||||
|
<Files>
|
||||||
<File>
|
<File>
|
||||||
<FileName>msh.c</FileName>
|
<FileName>msh.c</FileName>
|
||||||
<FileType>1</FileType>
|
<FileType>1</FileType>
|
||||||
|
|
@ -626,90 +708,135 @@
|
||||||
<FileType>1</FileType>
|
<FileType>1</FileType>
|
||||||
<FilePath>..\libraries\STM32F4xx_HAL\CMSIS\Device\ST\STM32F4xx\Source\Templates\system_stm32f4xx.c</FilePath>
|
<FilePath>..\libraries\STM32F4xx_HAL\CMSIS\Device\ST\STM32F4xx\Source\Templates\system_stm32f4xx.c</FilePath>
|
||||||
</File>
|
</File>
|
||||||
|
</Files>
|
||||||
|
<Files>
|
||||||
<File>
|
<File>
|
||||||
<FileName>stm32f4xx_hal.c</FileName>
|
<FileName>stm32f4xx_hal.c</FileName>
|
||||||
<FileType>1</FileType>
|
<FileType>1</FileType>
|
||||||
<FilePath>..\libraries\STM32F4xx_HAL\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal.c</FilePath>
|
<FilePath>..\libraries\STM32F4xx_HAL\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal.c</FilePath>
|
||||||
</File>
|
</File>
|
||||||
|
</Files>
|
||||||
|
<Files>
|
||||||
<File>
|
<File>
|
||||||
<FileName>stm32f4xx_hal_cec.c</FileName>
|
<FileName>stm32f4xx_hal_cec.c</FileName>
|
||||||
<FileType>1</FileType>
|
<FileType>1</FileType>
|
||||||
<FilePath>..\libraries\STM32F4xx_HAL\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_cec.c</FilePath>
|
<FilePath>..\libraries\STM32F4xx_HAL\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_cec.c</FilePath>
|
||||||
</File>
|
</File>
|
||||||
|
</Files>
|
||||||
|
<Files>
|
||||||
<File>
|
<File>
|
||||||
<FileName>stm32f4xx_hal_cortex.c</FileName>
|
<FileName>stm32f4xx_hal_cortex.c</FileName>
|
||||||
<FileType>1</FileType>
|
<FileType>1</FileType>
|
||||||
<FilePath>..\libraries\STM32F4xx_HAL\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_cortex.c</FilePath>
|
<FilePath>..\libraries\STM32F4xx_HAL\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_cortex.c</FilePath>
|
||||||
</File>
|
</File>
|
||||||
|
</Files>
|
||||||
|
<Files>
|
||||||
<File>
|
<File>
|
||||||
<FileName>stm32f4xx_hal_crc.c</FileName>
|
<FileName>stm32f4xx_hal_crc.c</FileName>
|
||||||
<FileType>1</FileType>
|
<FileType>1</FileType>
|
||||||
<FilePath>..\libraries\STM32F4xx_HAL\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_crc.c</FilePath>
|
<FilePath>..\libraries\STM32F4xx_HAL\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_crc.c</FilePath>
|
||||||
</File>
|
</File>
|
||||||
|
</Files>
|
||||||
|
<Files>
|
||||||
<File>
|
<File>
|
||||||
<FileName>stm32f4xx_hal_cryp.c</FileName>
|
<FileName>stm32f4xx_hal_cryp.c</FileName>
|
||||||
<FileType>1</FileType>
|
<FileType>1</FileType>
|
||||||
<FilePath>..\libraries\STM32F4xx_HAL\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_cryp.c</FilePath>
|
<FilePath>..\libraries\STM32F4xx_HAL\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_cryp.c</FilePath>
|
||||||
</File>
|
</File>
|
||||||
|
</Files>
|
||||||
|
<Files>
|
||||||
<File>
|
<File>
|
||||||
<FileName>stm32f4xx_hal_cryp_ex.c</FileName>
|
<FileName>stm32f4xx_hal_cryp_ex.c</FileName>
|
||||||
<FileType>1</FileType>
|
<FileType>1</FileType>
|
||||||
<FilePath>..\libraries\STM32F4xx_HAL\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_cryp_ex.c</FilePath>
|
<FilePath>..\libraries\STM32F4xx_HAL\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_cryp_ex.c</FilePath>
|
||||||
</File>
|
</File>
|
||||||
|
</Files>
|
||||||
|
<Files>
|
||||||
<File>
|
<File>
|
||||||
<FileName>stm32f4xx_hal_dma.c</FileName>
|
<FileName>stm32f4xx_hal_dma.c</FileName>
|
||||||
<FileType>1</FileType>
|
<FileType>1</FileType>
|
||||||
<FilePath>..\libraries\STM32F4xx_HAL\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_dma.c</FilePath>
|
<FilePath>..\libraries\STM32F4xx_HAL\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_dma.c</FilePath>
|
||||||
</File>
|
</File>
|
||||||
|
</Files>
|
||||||
|
<Files>
|
||||||
<File>
|
<File>
|
||||||
<FileName>stm32f4xx_hal_dma_ex.c</FileName>
|
<FileName>stm32f4xx_hal_dma_ex.c</FileName>
|
||||||
<FileType>1</FileType>
|
<FileType>1</FileType>
|
||||||
<FilePath>..\libraries\STM32F4xx_HAL\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_dma_ex.c</FilePath>
|
<FilePath>..\libraries\STM32F4xx_HAL\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_dma_ex.c</FilePath>
|
||||||
</File>
|
</File>
|
||||||
|
</Files>
|
||||||
|
<Files>
|
||||||
<File>
|
<File>
|
||||||
<FileName>stm32f4xx_hal_pwr.c</FileName>
|
<FileName>stm32f4xx_hal_pwr.c</FileName>
|
||||||
<FileType>1</FileType>
|
<FileType>1</FileType>
|
||||||
<FilePath>..\libraries\STM32F4xx_HAL\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_pwr.c</FilePath>
|
<FilePath>..\libraries\STM32F4xx_HAL\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_pwr.c</FilePath>
|
||||||
</File>
|
</File>
|
||||||
|
</Files>
|
||||||
|
<Files>
|
||||||
<File>
|
<File>
|
||||||
<FileName>stm32f4xx_hal_pwr_ex.c</FileName>
|
<FileName>stm32f4xx_hal_pwr_ex.c</FileName>
|
||||||
<FileType>1</FileType>
|
<FileType>1</FileType>
|
||||||
<FilePath>..\libraries\STM32F4xx_HAL\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_pwr_ex.c</FilePath>
|
<FilePath>..\libraries\STM32F4xx_HAL\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_pwr_ex.c</FilePath>
|
||||||
</File>
|
</File>
|
||||||
|
</Files>
|
||||||
|
<Files>
|
||||||
<File>
|
<File>
|
||||||
<FileName>stm32f4xx_hal_rcc.c</FileName>
|
<FileName>stm32f4xx_hal_rcc.c</FileName>
|
||||||
<FileType>1</FileType>
|
<FileType>1</FileType>
|
||||||
<FilePath>..\libraries\STM32F4xx_HAL\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_rcc.c</FilePath>
|
<FilePath>..\libraries\STM32F4xx_HAL\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_rcc.c</FilePath>
|
||||||
</File>
|
</File>
|
||||||
|
</Files>
|
||||||
|
<Files>
|
||||||
<File>
|
<File>
|
||||||
<FileName>stm32f4xx_hal_rcc_ex.c</FileName>
|
<FileName>stm32f4xx_hal_rcc_ex.c</FileName>
|
||||||
<FileType>1</FileType>
|
<FileType>1</FileType>
|
||||||
<FilePath>..\libraries\STM32F4xx_HAL\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_rcc_ex.c</FilePath>
|
<FilePath>..\libraries\STM32F4xx_HAL\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_rcc_ex.c</FilePath>
|
||||||
</File>
|
</File>
|
||||||
|
</Files>
|
||||||
|
<Files>
|
||||||
<File>
|
<File>
|
||||||
<FileName>stm32f4xx_hal_rng.c</FileName>
|
<FileName>stm32f4xx_hal_rng.c</FileName>
|
||||||
<FileType>1</FileType>
|
<FileType>1</FileType>
|
||||||
<FilePath>..\libraries\STM32F4xx_HAL\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_rng.c</FilePath>
|
<FilePath>..\libraries\STM32F4xx_HAL\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_rng.c</FilePath>
|
||||||
</File>
|
</File>
|
||||||
|
</Files>
|
||||||
|
<Files>
|
||||||
<File>
|
<File>
|
||||||
<FileName>stm32f4xx_hal_gpio.c</FileName>
|
<FileName>stm32f4xx_hal_gpio.c</FileName>
|
||||||
<FileType>1</FileType>
|
<FileType>1</FileType>
|
||||||
<FilePath>..\libraries\STM32F4xx_HAL\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_gpio.c</FilePath>
|
<FilePath>..\libraries\STM32F4xx_HAL\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_gpio.c</FilePath>
|
||||||
</File>
|
</File>
|
||||||
|
</Files>
|
||||||
|
<Files>
|
||||||
<File>
|
<File>
|
||||||
<FileName>stm32f4xx_hal_uart.c</FileName>
|
<FileName>stm32f4xx_hal_uart.c</FileName>
|
||||||
<FileType>1</FileType>
|
<FileType>1</FileType>
|
||||||
<FilePath>..\libraries\STM32F4xx_HAL\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_uart.c</FilePath>
|
<FilePath>..\libraries\STM32F4xx_HAL\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_uart.c</FilePath>
|
||||||
</File>
|
</File>
|
||||||
|
</Files>
|
||||||
|
<Files>
|
||||||
<File>
|
<File>
|
||||||
<FileName>stm32f4xx_hal_usart.c</FileName>
|
<FileName>stm32f4xx_hal_usart.c</FileName>
|
||||||
<FileType>1</FileType>
|
<FileType>1</FileType>
|
||||||
<FilePath>..\libraries\STM32F4xx_HAL\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_usart.c</FilePath>
|
<FilePath>..\libraries\STM32F4xx_HAL\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_usart.c</FilePath>
|
||||||
</File>
|
</File>
|
||||||
</Files>
|
</Files>
|
||||||
|
<Files>
|
||||||
|
<File>
|
||||||
|
<FileName>stm32f4xx_hal_iwdg.c</FileName>
|
||||||
|
<FileType>1</FileType>
|
||||||
|
<FilePath>..\libraries\STM32F4xx_HAL\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_iwdg.c</FilePath>
|
||||||
|
</File>
|
||||||
|
</Files>
|
||||||
|
<Files>
|
||||||
|
<File>
|
||||||
|
<FileName>stm32f4xx_hal_wwdg.c</FileName>
|
||||||
|
<FileType>1</FileType>
|
||||||
|
<FilePath>..\libraries\STM32F4xx_HAL\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_wwdg.c</FilePath>
|
||||||
|
</File>
|
||||||
|
</Files>
|
||||||
</Group>
|
</Group>
|
||||||
</Groups>
|
</Groups>
|
||||||
</Target>
|
</Target>
|
||||||
</Targets>
|
</Targets>
|
||||||
|
|
||||||
</Project>
|
</Project>
|
||||||
|
|
|
||||||
|
|
@ -10,14 +10,14 @@
|
||||||
<TargetName>rt-thread</TargetName>
|
<TargetName>rt-thread</TargetName>
|
||||||
<ToolsetNumber>0x4</ToolsetNumber>
|
<ToolsetNumber>0x4</ToolsetNumber>
|
||||||
<ToolsetName>ARM-ADS</ToolsetName>
|
<ToolsetName>ARM-ADS</ToolsetName>
|
||||||
<pCCUsed>5060750::V5.06 update 6 (build 750)::ARMCC</pCCUsed>
|
<pCCUsed>5060750::V5.06 update 6 (build 750)::.\ARMCC</pCCUsed>
|
||||||
<uAC6>0</uAC6>
|
<uAC6>0</uAC6>
|
||||||
<TargetOption>
|
<TargetOption>
|
||||||
<TargetCommonOption>
|
<TargetCommonOption>
|
||||||
<Device>STM32F413ZHTx</Device>
|
<Device>STM32F413ZHTx</Device>
|
||||||
<Vendor>STMicroelectronics</Vendor>
|
<Vendor>STMicroelectronics</Vendor>
|
||||||
<PackID>Keil.STM32F4xx_DFP.2.13.0</PackID>
|
<PackID>Keil.STM32F4xx_DFP.2.14.0</PackID>
|
||||||
<PackURL>http://www.keil.com/pack</PackURL>
|
<PackURL>http://www.keil.com/pack/</PackURL>
|
||||||
<Cpu>IRAM(0x20000000,0x00050000) IROM(0x08000000,0x00180000) CPUTYPE("Cortex-M4") FPU2 CLOCK(12000000) ELITTLE</Cpu>
|
<Cpu>IRAM(0x20000000,0x00050000) IROM(0x08000000,0x00180000) CPUTYPE("Cortex-M4") FPU2 CLOCK(12000000) ELITTLE</Cpu>
|
||||||
<FlashUtilSpec></FlashUtilSpec>
|
<FlashUtilSpec></FlashUtilSpec>
|
||||||
<StartupFile></StartupFile>
|
<StartupFile></StartupFile>
|
||||||
|
|
@ -184,6 +184,8 @@
|
||||||
<hadXRAM>0</hadXRAM>
|
<hadXRAM>0</hadXRAM>
|
||||||
<uocXRam>0</uocXRam>
|
<uocXRam>0</uocXRam>
|
||||||
<RvdsVP>2</RvdsVP>
|
<RvdsVP>2</RvdsVP>
|
||||||
|
<RvdsMve>0</RvdsMve>
|
||||||
|
<RvdsCdeCp>0</RvdsCdeCp>
|
||||||
<hadIRAM2>0</hadIRAM2>
|
<hadIRAM2>0</hadIRAM2>
|
||||||
<hadIROM2>0</hadIROM2>
|
<hadIROM2>0</hadIROM2>
|
||||||
<StupSel>8</StupSel>
|
<StupSel>8</StupSel>
|
||||||
|
|
@ -337,7 +339,7 @@
|
||||||
<MiscControls></MiscControls>
|
<MiscControls></MiscControls>
|
||||||
<Define>USE_HAL_DRIVER, STM32F413xx</Define>
|
<Define>USE_HAL_DRIVER, STM32F413xx</Define>
|
||||||
<Undefine></Undefine>
|
<Undefine></Undefine>
|
||||||
<IncludePath>.;..\..\..\include;applications;.;board;board\CubeMX_Config\Inc;..\libraries\HAL_Drivers;..\libraries\HAL_Drivers\config;..\..\..\libcpu\arm\common;..\..\..\libcpu\arm\cortex-m4;..\..\..\components\drivers\include;..\..\..\components\drivers\include;..\..\..\components\drivers\include;..\..\..\components\finsh;..\..\..\components\libc\compilers\common;..\libraries\STM32F4xx_HAL\STM32F4xx_HAL_Driver\Inc;..\libraries\STM32F4xx_HAL\CMSIS\Device\ST\STM32F4xx\Include;..\libraries\STM32F4xx_HAL\CMSIS\Include</IncludePath>
|
<IncludePath>.;..\..\..\include;applications;.;board;board\CubeMX_Config\Inc;..\libraries\HAL_Drivers;..\libraries\HAL_Drivers\config;..\..\..\libcpu\arm\common;..\..\..\libcpu\arm\cortex-m4;..\..\..\components\drivers\include;..\..\..\components\drivers\include;..\..\..\components\drivers\include;..\..\..\components\drivers\include;..\..\..\components\finsh;..\..\..\components\libc\compilers\common;..\libraries\STM32F4xx_HAL\STM32F4xx_HAL_Driver\Inc;..\libraries\STM32F4xx_HAL\CMSIS\Device\ST\STM32F4xx\Include;..\libraries\STM32F4xx_HAL\CMSIS\Include</IncludePath>
|
||||||
</VariousControls>
|
</VariousControls>
|
||||||
</Cads>
|
</Cads>
|
||||||
<Aads>
|
<Aads>
|
||||||
|
|
@ -350,7 +352,7 @@
|
||||||
<NoWarn>0</NoWarn>
|
<NoWarn>0</NoWarn>
|
||||||
<uSurpInc>0</uSurpInc>
|
<uSurpInc>0</uSurpInc>
|
||||||
<useXO>0</useXO>
|
<useXO>0</useXO>
|
||||||
<uClangAs>0</uClangAs>
|
<ClangAsOpt>4</ClangAsOpt>
|
||||||
<VariousControls>
|
<VariousControls>
|
||||||
<MiscControls></MiscControls>
|
<MiscControls></MiscControls>
|
||||||
<Define></Define>
|
<Define></Define>
|
||||||
|
|
@ -576,6 +578,11 @@
|
||||||
<FileType>1</FileType>
|
<FileType>1</FileType>
|
||||||
<FilePath>..\..\..\components\drivers\src\workqueue.c</FilePath>
|
<FilePath>..\..\..\components\drivers\src\workqueue.c</FilePath>
|
||||||
</File>
|
</File>
|
||||||
|
<File>
|
||||||
|
<FileName>watchdog.c</FileName>
|
||||||
|
<FileType>1</FileType>
|
||||||
|
<FilePath>..\..\..\components\drivers\watchdog\watchdog.c</FilePath>
|
||||||
|
</File>
|
||||||
</Files>
|
</Files>
|
||||||
</Group>
|
</Group>
|
||||||
<Group>
|
<Group>
|
||||||
|
|
@ -696,6 +703,16 @@
|
||||||
<FileType>1</FileType>
|
<FileType>1</FileType>
|
||||||
<FilePath>..\libraries\STM32F4xx_HAL\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_usart.c</FilePath>
|
<FilePath>..\libraries\STM32F4xx_HAL\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_usart.c</FilePath>
|
||||||
</File>
|
</File>
|
||||||
|
<File>
|
||||||
|
<FileName>stm32f4xx_hal_iwdg.c</FileName>
|
||||||
|
<FileType>1</FileType>
|
||||||
|
<FilePath>..\libraries\STM32F4xx_HAL\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_iwdg.c</FilePath>
|
||||||
|
</File>
|
||||||
|
<File>
|
||||||
|
<FileName>stm32f4xx_hal_wwdg.c</FileName>
|
||||||
|
<FileType>1</FileType>
|
||||||
|
<FilePath>..\libraries\STM32F4xx_HAL\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_wwdg.c</FilePath>
|
||||||
|
</File>
|
||||||
</Files>
|
</Files>
|
||||||
</Group>
|
</Group>
|
||||||
</Groups>
|
</Groups>
|
||||||
|
|
@ -708,4 +725,19 @@
|
||||||
<files/>
|
<files/>
|
||||||
</RTE>
|
</RTE>
|
||||||
|
|
||||||
|
<LayerInfo>
|
||||||
|
<Layers>
|
||||||
|
<Layer>
|
||||||
|
<LayName><Project Info></LayName>
|
||||||
|
<LayDesc></LayDesc>
|
||||||
|
<LayUrl></LayUrl>
|
||||||
|
<LayKeys></LayKeys>
|
||||||
|
<LayCat></LayCat>
|
||||||
|
<LayLic></LayLic>
|
||||||
|
<LayTarg>0</LayTarg>
|
||||||
|
<LayPrjMark>1</LayPrjMark>
|
||||||
|
</Layer>
|
||||||
|
</Layers>
|
||||||
|
</LayerInfo>
|
||||||
|
|
||||||
</Project>
|
</Project>
|
||||||
|
|
|
||||||
|
|
@ -82,6 +82,7 @@
|
||||||
#define RT_SERIAL_USING_DMA
|
#define RT_SERIAL_USING_DMA
|
||||||
#define RT_SERIAL_RB_BUFSZ 64
|
#define RT_SERIAL_RB_BUFSZ 64
|
||||||
#define RT_USING_PIN
|
#define RT_USING_PIN
|
||||||
|
#define RT_USING_WDT
|
||||||
|
|
||||||
/* Using USB */
|
/* Using USB */
|
||||||
|
|
||||||
|
|
|
||||||
|
|
@ -73,7 +73,7 @@
|
||||||
<LExpSel>0</LExpSel>
|
<LExpSel>0</LExpSel>
|
||||||
</OPTXL>
|
</OPTXL>
|
||||||
<OPTFL>
|
<OPTFL>
|
||||||
<tvExp>0</tvExp>
|
<tvExp>1</tvExp>
|
||||||
<tvExpOptDlg>0</tvExpOptDlg>
|
<tvExpOptDlg>0</tvExpOptDlg>
|
||||||
<IsCurrentTarget>1</IsCurrentTarget>
|
<IsCurrentTarget>1</IsCurrentTarget>
|
||||||
</OPTFL>
|
</OPTFL>
|
||||||
|
|
@ -120,7 +120,7 @@
|
||||||
<SetRegEntry>
|
<SetRegEntry>
|
||||||
<Number>0</Number>
|
<Number>0</Number>
|
||||||
<Key>ST-LINKIII-KEIL_SWO</Key>
|
<Key>ST-LINKIII-KEIL_SWO</Key>
|
||||||
<Name>-U-O206 -O206 -SF4000 -C0 -A0 -I0 -HNlocalhost -HP7184 -P2 -TO18 -TC10000000 -TP21 -TDS8007 -TDT0 -TDC1F -TIEFFFFFFFF -TIP8 -FO7 -FD20000000 -FC1000 -FN1 -FF0STM32F4xx_1536.FLM -FS08000000 -FL0180000 -FP0($$Device:STM32F413ZHTx$CMSIS\Flash\STM32F4xx_1536.FLM)</Name>
|
<Name>-U-O206 -O206 -SF10000 -C0 -A0 -I0 -HNlocalhost -HP7184 -P2 -N00("") -D00(00000000) -L00(0) -TO131090 -TC10000000 -TT10000000 -TP21 -TDS8007 -TDT0 -TDC1F -TIEFFFFFFFF -TIP8 -FO15 -FD20000000 -FC1000 -FN1 -FF0STM32F4xx_1536.FLM -FS08000000 -FL0180000 -FP0($$Device:STM32F413ZHTx$CMSIS\Flash\STM32F4xx_1536.FLM)</Name>
|
||||||
</SetRegEntry>
|
</SetRegEntry>
|
||||||
<SetRegEntry>
|
<SetRegEntry>
|
||||||
<Number>0</Number>
|
<Number>0</Number>
|
||||||
|
|
@ -178,6 +178,7 @@
|
||||||
<pMultCmdsp></pMultCmdsp>
|
<pMultCmdsp></pMultCmdsp>
|
||||||
<DebugDescription>
|
<DebugDescription>
|
||||||
<Enable>1</Enable>
|
<Enable>1</Enable>
|
||||||
|
<EnableFlashSeq>0</EnableFlashSeq>
|
||||||
<EnableLog>0</EnableLog>
|
<EnableLog>0</EnableLog>
|
||||||
<Protocol>2</Protocol>
|
<Protocol>2</Protocol>
|
||||||
<DbgClock>10000000</DbgClock>
|
<DbgClock>10000000</DbgClock>
|
||||||
|
|
|
||||||
|
|
@ -16,8 +16,8 @@
|
||||||
<TargetCommonOption>
|
<TargetCommonOption>
|
||||||
<Device>STM32F413ZHTx</Device>
|
<Device>STM32F413ZHTx</Device>
|
||||||
<Vendor>STMicroelectronics</Vendor>
|
<Vendor>STMicroelectronics</Vendor>
|
||||||
<PackID>Keil.STM32F4xx_DFP.2.13.0</PackID>
|
<PackID>Keil.STM32F4xx_DFP.2.14.0</PackID>
|
||||||
<PackURL>http://www.keil.com/pack</PackURL>
|
<PackURL>http://www.keil.com/pack/</PackURL>
|
||||||
<Cpu>IRAM(0x20000000,0x00050000) IROM(0x08000000,0x00180000) CPUTYPE("Cortex-M4") FPU2 CLOCK(12000000) ELITTLE</Cpu>
|
<Cpu>IRAM(0x20000000,0x00050000) IROM(0x08000000,0x00180000) CPUTYPE("Cortex-M4") FPU2 CLOCK(12000000) ELITTLE</Cpu>
|
||||||
<FlashUtilSpec></FlashUtilSpec>
|
<FlashUtilSpec></FlashUtilSpec>
|
||||||
<StartupFile></StartupFile>
|
<StartupFile></StartupFile>
|
||||||
|
|
@ -184,6 +184,8 @@
|
||||||
<hadXRAM>0</hadXRAM>
|
<hadXRAM>0</hadXRAM>
|
||||||
<uocXRam>0</uocXRam>
|
<uocXRam>0</uocXRam>
|
||||||
<RvdsVP>2</RvdsVP>
|
<RvdsVP>2</RvdsVP>
|
||||||
|
<RvdsMve>0</RvdsMve>
|
||||||
|
<RvdsCdeCp>0</RvdsCdeCp>
|
||||||
<hadIRAM2>0</hadIRAM2>
|
<hadIRAM2>0</hadIRAM2>
|
||||||
<hadIROM2>0</hadIROM2>
|
<hadIROM2>0</hadIROM2>
|
||||||
<StupSel>8</StupSel>
|
<StupSel>8</StupSel>
|
||||||
|
|
@ -350,7 +352,7 @@
|
||||||
<NoWarn>0</NoWarn>
|
<NoWarn>0</NoWarn>
|
||||||
<uSurpInc>0</uSurpInc>
|
<uSurpInc>0</uSurpInc>
|
||||||
<useXO>0</useXO>
|
<useXO>0</useXO>
|
||||||
<uClangAs>0</uClangAs>
|
<ClangAsOpt>4</ClangAsOpt>
|
||||||
<VariousControls>
|
<VariousControls>
|
||||||
<MiscControls></MiscControls>
|
<MiscControls></MiscControls>
|
||||||
<Define></Define>
|
<Define></Define>
|
||||||
|
|
@ -391,4 +393,19 @@
|
||||||
<files/>
|
<files/>
|
||||||
</RTE>
|
</RTE>
|
||||||
|
|
||||||
|
<LayerInfo>
|
||||||
|
<Layers>
|
||||||
|
<Layer>
|
||||||
|
<LayName><Project Info></LayName>
|
||||||
|
<LayDesc></LayDesc>
|
||||||
|
<LayUrl></LayUrl>
|
||||||
|
<LayKeys></LayKeys>
|
||||||
|
<LayCat></LayCat>
|
||||||
|
<LayLic></LayLic>
|
||||||
|
<LayTarg>0</LayTarg>
|
||||||
|
<LayPrjMark>1</LayPrjMark>
|
||||||
|
</Layer>
|
||||||
|
</Layers>
|
||||||
|
</LayerInfo>
|
||||||
|
|
||||||
</Project>
|
</Project>
|
||||||
|
|
|
||||||
Loading…
Reference in New Issue