[BSP]添加了STM32F10x HAL库的支持

[BSP]添加了STM32F10x HAL库的支持

bsp/stm32f10x_HAL/Libraries/CMSIS/Device/ST/STM32F1xx/Include/stm32f1xx.h

@@ -0,0 +1,238 @@
+/**
+  ******************************************************************************
+  * @file    stm32f1xx.h
+  * @author  MCD Application Team
+  * @version V4.2.0
+  * @date    31-March-2017
+  * @brief   CMSIS STM32F1xx Device Peripheral Access Layer Header File. 
+  *
+  *          The file is the unique include file that the application programmer
+  *          is using in the C source code, usually in main.c. This file contains:
+  *            - Configuration section that allows to select:
+  *              - The STM32F1xx device used in the target application
+  *              - To use or not the peripheral’s drivers in application code(i.e. 
+  *                code will be based on direct access to peripheral’s registers 
+  *                rather than drivers API), this option is controlled by 
+  *                "#define USE_HAL_DRIVER"
+  *  
+  ******************************************************************************
+  * @attention
+  *
+  * <h2><center>&copy; COPYRIGHT(c) 2017 STMicroelectronics</center></h2>
+  *
+  * Redistribution and use in source and binary forms, with or without modification,
+  * are permitted provided that the following conditions are met:
+  *   1. Redistributions of source code must retain the above copyright notice,
+  *      this list of conditions and the following disclaimer.
+  *   2. Redistributions in binary form must reproduce the above copyright notice,
+  *      this list of conditions and the following disclaimer in the documentation
+  *      and/or other materials provided with the distribution.
+  *   3. Neither the name of STMicroelectronics nor the names of its contributors
+  *      may be used to endorse or promote products derived from this software
+  *      without specific prior written permission.
+  *
+  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+  * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+  * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+  * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+  * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+  * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+  * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+  *
+  ******************************************************************************
+  */
+
+/** @addtogroup CMSIS
+  * @{
+  */
+
+/** @addtogroup stm32f1xx
+  * @{
+  */
+    
+#ifndef __STM32F1XX_H
+#define __STM32F1XX_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif /* __cplusplus */
+  
+/** @addtogroup Library_configuration_section
+  * @{
+  */
+
+/**
+  * @brief STM32 Family
+  */
+#if !defined (STM32F1)
+#define STM32F1
+#endif /* STM32F1 */
+
+/* Uncomment the line below according to the target STM32L device used in your 
+   application 
+  */
+
+#if !defined (STM32F100xB) && !defined (STM32F100xE) && !defined (STM32F101x6) && \
+    !defined (STM32F101xB) && !defined (STM32F101xE) && !defined (STM32F101xG) && !defined (STM32F102x6) && !defined (STM32F102xB) && !defined (STM32F103x6) && \
+    !defined (STM32F103xB) && !defined (STM32F103xE) && !defined (STM32F103xG) && !defined (STM32F105xC) && !defined (STM32F107xC)
+  /* #define STM32F100xB  */   /*!< STM32F100C4, STM32F100R4, STM32F100C6, STM32F100R6, STM32F100C8, STM32F100R8, STM32F100V8, STM32F100CB, STM32F100RB and STM32F100VB */
+  /* #define STM32F100xE */    /*!< STM32F100RC, STM32F100VC, STM32F100ZC, STM32F100RD, STM32F100VD, STM32F100ZD, STM32F100RE, STM32F100VE and STM32F100ZE */
+  /* #define STM32F101x6  */   /*!< STM32F101C4, STM32F101R4, STM32F101T4, STM32F101C6, STM32F101R6 and STM32F101T6 Devices */
+  /* #define STM32F101xB  */   /*!< STM32F101C8, STM32F101R8, STM32F101T8, STM32F101V8, STM32F101CB, STM32F101RB, STM32F101TB and STM32F101VB */
+  /* #define STM32F101xE */    /*!< STM32F101RC, STM32F101VC, STM32F101ZC, STM32F101RD, STM32F101VD, STM32F101ZD, STM32F101RE, STM32F101VE and STM32F101ZE */ 
+  /* #define STM32F101xG  */   /*!< STM32F101RF, STM32F101VF, STM32F101ZF, STM32F101RG, STM32F101VG and STM32F101ZG */
+  /* #define STM32F102x6 */    /*!< STM32F102C4, STM32F102R4, STM32F102C6 and STM32F102R6 */
+  /* #define STM32F102xB  */   /*!< STM32F102C8, STM32F102R8, STM32F102CB and STM32F102RB */
+  /* #define STM32F103x6  */   /*!< STM32F103C4, STM32F103R4, STM32F103T4, STM32F103C6, STM32F103R6 and STM32F103T6 */
+  /* #define STM32F103xB  */   /*!< STM32F103C8, STM32F103R8, STM32F103T8, STM32F103V8, STM32F103CB, STM32F103RB, STM32F103TB and STM32F103VB */
+  /* #define STM32F103xE */    /*!< STM32F103RC, STM32F103VC, STM32F103ZC, STM32F103RD, STM32F103VD, STM32F103ZD, STM32F103RE, STM32F103VE and STM32F103ZE */
+  /* #define STM32F103xG  */   /*!< STM32F103RF, STM32F103VF, STM32F103ZF, STM32F103RG, STM32F103VG and STM32F103ZG */
+  /* #define STM32F105xC */    /*!< STM32F105R8, STM32F105V8, STM32F105RB, STM32F105VB, STM32F105RC and STM32F105VC */
+  /* #define STM32F107xC  */   /*!< STM32F107RB, STM32F107VB, STM32F107RC and STM32F107VC */  
+#endif
+
+/*  Tip: To avoid modifying this file each time you need to switch between these
+        devices, you can define the device in your toolchain compiler preprocessor.
+  */
+  
+#if !defined  (USE_HAL_DRIVER)
+/**
+ * @brief Comment the line below if you will not use the peripherals drivers.
+   In this case, these drivers will not be included and the application code will 
+   be based on direct access to peripherals registers 
+   */
+  /*#define USE_HAL_DRIVER */
+#endif /* USE_HAL_DRIVER */
+
+/**
+  * @brief CMSIS Device version number V4.2.0
+  */
+#define __STM32F1_CMSIS_VERSION_MAIN   (0x04) /*!< [31:24] main version */
+#define __STM32F1_CMSIS_VERSION_SUB1   (0x02) /*!< [23:16] sub1 version */
+#define __STM32F1_CMSIS_VERSION_SUB2   (0x00) /*!< [15:8]  sub2 version */
+#define __STM32F1_CMSIS_VERSION_RC     (0x00) /*!< [7:0]  release candidate */ 
+#define __STM32F1_CMSIS_VERSION        ((__STM32F1_CMSIS_VERSION_MAIN << 24)\
+                                       |(__STM32F1_CMSIS_VERSION_SUB1 << 16)\
+                                       |(__STM32F1_CMSIS_VERSION_SUB2 << 8 )\
+                                       |(__STM32F1_CMSIS_VERSION_RC))
+
+/**
+  * @}
+  */
+
+/** @addtogroup Device_Included
+  * @{
+  */
+
+#if defined(STM32F100xB)
+  #include "stm32f100xb.h"
+#elif defined(STM32F100xE)
+  #include "stm32f100xe.h"
+#elif defined(STM32F101x6)
+  #include "stm32f101x6.h"
+#elif defined(STM32F101xB)
+  #include "stm32f101xb.h"
+#elif defined(STM32F101xE)
+  #include "stm32f101xe.h"
+#elif defined(STM32F101xG)
+  #include "stm32f101xg.h"
+#elif defined(STM32F102x6)
+  #include "stm32f102x6.h"
+#elif defined(STM32F102xB)
+  #include "stm32f102xb.h"
+#elif defined(STM32F103x6)
+  #include "stm32f103x6.h"
+#elif defined(STM32F103xB)
+  #include "stm32f103xb.h"
+#elif defined(STM32F103xE)
+  #include "stm32f103xe.h"
+#elif defined(STM32F103xG)
+  #include "stm32f103xg.h"
+#elif defined(STM32F105xC)
+  #include "stm32f105xc.h"
+#elif defined(STM32F107xC)
+  #include "stm32f107xc.h"
+#else
+ #error "Please select first the target STM32F1xx device used in your application (in stm32f1xx.h file)"
+#endif
+
+/**
+  * @}
+  */
+
+/** @addtogroup Exported_types
+  * @{
+  */  
+typedef enum 
+{
+  RESET = 0, 
+  SET = !RESET
+} FlagStatus, ITStatus;
+
+typedef enum 
+{
+  DISABLE = 0, 
+  ENABLE = !DISABLE
+} FunctionalState;
+#define IS_FUNCTIONAL_STATE(STATE) (((STATE) == DISABLE) || ((STATE) == ENABLE))
+
+typedef enum 
+{
+  ERROR = 0, 
+  SUCCESS = !ERROR
+} ErrorStatus;
+
+/**
+  * @}
+  */
+
+
+/** @addtogroup Exported_macros
+  * @{
+  */
+#define SET_BIT(REG, BIT)     ((REG) |= (BIT))
+
+#define CLEAR_BIT(REG, BIT)   ((REG) &= ~(BIT))
+
+#define READ_BIT(REG, BIT)    ((REG) & (BIT))
+
+#define CLEAR_REG(REG)        ((REG) = (0x0))
+
+#define WRITE_REG(REG, VAL)   ((REG) = (VAL))
+
+#define READ_REG(REG)         ((REG))
+
+#define MODIFY_REG(REG, CLEARMASK, SETMASK)  WRITE_REG((REG), (((READ_REG(REG)) & (~(CLEARMASK))) | (SETMASK)))
+
+#define POSITION_VAL(VAL)     (__CLZ(__RBIT(VAL))) 
+
+
+/**
+  * @}
+  */
+
+#if defined (USE_HAL_DRIVER)
+ #include "stm32f1xx_hal.h"
+#endif /* USE_HAL_DRIVER */
+
+
+#ifdef __cplusplus
+}
+#endif /* __cplusplus */
+
+#endif /* __STM32F1xx_H */
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+  
+
+
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

bsp/stm32f10x_HAL/Libraries/CMSIS/Device/ST/STM32F1xx/Include/system_stm32f1xx.h

@@ -0,0 +1,116 @@
+/**
+  ******************************************************************************
+  * @file    system_stm32f10x.h
+  * @author  MCD Application Team
+  * @version V4.2.0
+  * @date    31-March-2017
+  * @brief   CMSIS Cortex-M3 Device Peripheral Access Layer System Header File.
+  ******************************************************************************
+  * @attention
+  *
+  * <h2><center>&copy; COPYRIGHT(c) 2017 STMicroelectronics</center></h2>
+  *
+  * Redistribution and use in source and binary forms, with or without modification,
+  * are permitted provided that the following conditions are met:
+  *   1. Redistributions of source code must retain the above copyright notice,
+  *      this list of conditions and the following disclaimer.
+  *   2. Redistributions in binary form must reproduce the above copyright notice,
+  *      this list of conditions and the following disclaimer in the documentation
+  *      and/or other materials provided with the distribution.
+  *   3. Neither the name of STMicroelectronics nor the names of its contributors
+  *      may be used to endorse or promote products derived from this software
+  *      without specific prior written permission.
+  *
+  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+  * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+  * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+  * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+  * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+  * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+  * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+  *
+  ******************************************************************************
+  */
+
+/** @addtogroup CMSIS
+  * @{
+  */
+
+/** @addtogroup stm32f10x_system
+  * @{
+  */  
+  
+/**
+  * @brief Define to prevent recursive inclusion
+  */
+#ifndef __SYSTEM_STM32F10X_H
+#define __SYSTEM_STM32F10X_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif 
+
+/** @addtogroup STM32F10x_System_Includes
+  * @{
+  */
+
+/**
+  * @}
+  */
+
+
+/** @addtogroup STM32F10x_System_Exported_types
+  * @{
+  */
+
+extern uint32_t SystemCoreClock;          /*!< System Clock Frequency (Core Clock) */
+extern const uint8_t  AHBPrescTable[16U];  /*!< AHB prescalers table values */
+extern const uint8_t  APBPrescTable[8U];   /*!< APB prescalers table values */
+
+/**
+  * @}
+  */
+
+/** @addtogroup STM32F10x_System_Exported_Constants
+  * @{
+  */
+
+/**
+  * @}
+  */
+
+/** @addtogroup STM32F10x_System_Exported_Macros
+  * @{
+  */
+
+/**
+  * @}
+  */
+
+/** @addtogroup STM32F10x_System_Exported_Functions
+  * @{
+  */
+  
+extern void SystemInit(void);
+extern void SystemCoreClockUpdate(void);
+/**
+  * @}
+  */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /*__SYSTEM_STM32F10X_H */
+
+/**
+  * @}
+  */
+  
+/**
+  * @}
+  */  
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

bsp/stm32f10x_HAL/Libraries/CMSIS/Device/ST/STM32F1xx/Source/Templates/arm/startup_stm32f100xb.s

@@ -0,0 +1,332 @@
+;******************** (C) COPYRIGHT 2017 STMicroelectronics ********************
+;* File Name          : startup_stm32f100xb.s
+;* Author             : MCD Application Team
+;* Version            : V4.2.0
+;* Date               : 31-March-2017
+;* Description        : STM32F100xB Devices vector table for MDK-ARM toolchain. 
+;*                      This module performs:
+;*                      - Set the initial SP
+;*                      - Set the initial PC == Reset_Handler
+;*                      - Set the vector table entries with the exceptions ISR address
+;*                      - Configure the clock system
+;*                      - Branches to __main in the C library (which eventually
+;*                        calls main()).
+;*                      After Reset the Cortex-M3 processor is in Thread mode,
+;*                      priority is Privileged, and the Stack is set to Main.
+;********************************************************************************
+;*
+;* <h2><center>&copy; COPYRIGHT(c) 2017 STMicroelectronics</center></h2>
+;*
+;* Redistribution and use in source and binary forms, with or without modification,
+;* are permitted provided that the following conditions are met:
+;*   1. Redistributions of source code must retain the above copyright notice,
+;*      this list of conditions and the following disclaimer.
+;*   2. Redistributions in binary form must reproduce the above copyright notice,
+;*      this list of conditions and the following disclaimer in the documentation
+;*      and/or other materials provided with the distribution.
+;*   3. Neither the name of STMicroelectronics nor the names of its contributors
+;*      may be used to endorse or promote products derived from this software
+;*      without specific prior written permission.
+;*
+;* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+;* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+;* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+;* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+;* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+;* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+;* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+;* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+;* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+;* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+; 
+;*******************************************************************************
+
+; Amount of memory (in bytes) allocated for Stack
+; Tailor this value to your application needs
+; <h> Stack Configuration
+;   <o> Stack Size (in Bytes) <0x0-0xFFFFFFFF:8>
+; </h>
+
+Stack_Size      EQU     0x00000400
+
+                AREA    STACK, NOINIT, READWRITE, ALIGN=3
+Stack_Mem       SPACE   Stack_Size
+__initial_sp
+
+
+; <h> Heap Configuration
+;   <o>  Heap Size (in Bytes) <0x0-0xFFFFFFFF:8>
+; </h>
+
+Heap_Size       EQU     0x00000200
+
+                AREA    HEAP, NOINIT, READWRITE, ALIGN=3
+__heap_base
+Heap_Mem        SPACE   Heap_Size
+__heap_limit
+
+                PRESERVE8
+                THUMB
+
+
+; Vector Table Mapped to Address 0 at Reset
+                AREA    RESET, DATA, READONLY
+                EXPORT  __Vectors
+                EXPORT  __Vectors_End
+                EXPORT  __Vectors_Size
+
+__Vectors       DCD     __initial_sp                    ; Top of Stack
+                DCD     Reset_Handler                   ; Reset Handler
+                DCD     NMI_Handler                     ; NMI Handler
+                DCD     HardFault_Handler               ; Hard Fault Handler
+                DCD     MemManage_Handler               ; MPU Fault Handler
+                DCD     BusFault_Handler                ; Bus Fault Handler
+                DCD     UsageFault_Handler              ; Usage Fault Handler
+                DCD     0                               ; Reserved
+                DCD     0                               ; Reserved
+                DCD     0                               ; Reserved
+                DCD     0                               ; Reserved
+                DCD     SVC_Handler                     ; SVCall Handler
+                DCD     DebugMon_Handler                ; Debug Monitor Handler
+                DCD     0                               ; Reserved
+                DCD     PendSV_Handler                  ; PendSV Handler
+                DCD     SysTick_Handler                 ; SysTick Handler
+
+                ; External Interrupts
+                DCD     WWDG_IRQHandler                 ; Window Watchdog
+                DCD     PVD_IRQHandler                  ; PVD through EXTI Line detect
+                DCD     TAMPER_IRQHandler               ; Tamper
+                DCD     RTC_IRQHandler                  ; RTC
+                DCD     FLASH_IRQHandler                ; Flash
+                DCD     RCC_IRQHandler                  ; RCC
+                DCD     EXTI0_IRQHandler                ; EXTI Line 0
+                DCD     EXTI1_IRQHandler                ; EXTI Line 1
+                DCD     EXTI2_IRQHandler                ; EXTI Line 2
+                DCD     EXTI3_IRQHandler                ; EXTI Line 3
+                DCD     EXTI4_IRQHandler                ; EXTI Line 4
+                DCD     DMA1_Channel1_IRQHandler        ; DMA1 Channel 1
+                DCD     DMA1_Channel2_IRQHandler        ; DMA1 Channel 2
+                DCD     DMA1_Channel3_IRQHandler        ; DMA1 Channel 3
+                DCD     DMA1_Channel4_IRQHandler        ; DMA1 Channel 4
+                DCD     DMA1_Channel5_IRQHandler        ; DMA1 Channel 5
+                DCD     DMA1_Channel6_IRQHandler        ; DMA1 Channel 6
+                DCD     DMA1_Channel7_IRQHandler        ; DMA1 Channel 7
+                DCD     ADC1_IRQHandler                 ; ADC1
+                DCD     0                               ; Reserved
+                DCD     0                               ; Reserved
+                DCD     0                               ; Reserved
+                DCD     0                               ; Reserved
+                DCD     EXTI9_5_IRQHandler              ; EXTI Line 9..5
+                DCD     TIM1_BRK_TIM15_IRQHandler       ; TIM1 Break and TIM15
+                DCD     TIM1_UP_TIM16_IRQHandler        ; TIM1 Update and TIM16
+                DCD     TIM1_TRG_COM_TIM17_IRQHandler   ; TIM1 Trigger and Commutation and TIM17
+                DCD     TIM1_CC_IRQHandler              ; TIM1 Capture Compare
+                DCD     TIM2_IRQHandler                 ; TIM2
+                DCD     TIM3_IRQHandler                 ; TIM3
+                DCD     TIM4_IRQHandler                 ; TIM4
+                DCD     I2C1_EV_IRQHandler              ; I2C1 Event
+                DCD     I2C1_ER_IRQHandler              ; I2C1 Error
+                DCD     I2C2_EV_IRQHandler              ; I2C2 Event
+                DCD     I2C2_ER_IRQHandler              ; I2C2 Error
+                DCD     SPI1_IRQHandler                 ; SPI1
+                DCD     SPI2_IRQHandler                 ; SPI2
+                DCD     USART1_IRQHandler               ; USART1
+                DCD     USART2_IRQHandler               ; USART2
+                DCD     USART3_IRQHandler               ; USART3
+                DCD     EXTI15_10_IRQHandler            ; EXTI Line 15..10
+                DCD     RTC_Alarm_IRQHandler             ; RTC Alarm through EXTI Line
+                DCD     CEC_IRQHandler                  ; HDMI-CEC
+                DCD     0                               ; Reserved
+                DCD     0                               ; Reserved
+                DCD     0                               ; Reserved
+                DCD     0                               ; Reserved 
+                DCD     0                               ; Reserved
+                DCD     0                               ; Reserved
+                DCD     0                               ; Reserved
+                DCD     0                               ; Reserved 
+                DCD     0                               ; Reserved
+                DCD     0                               ; Reserved
+                DCD     0                               ; Reserved
+                DCD     TIM6_DAC_IRQHandler             ; TIM6 and DAC underrun
+                DCD     TIM7_IRQHandler                 ; TIM7
+__Vectors_End
+
+__Vectors_Size  EQU  __Vectors_End - __Vectors
+
+                AREA    |.text|, CODE, READONLY
+
+; Reset handler
+Reset_Handler    PROC
+                 EXPORT  Reset_Handler             [WEAK]
+     IMPORT  __main
+     IMPORT  SystemInit
+                 LDR     R0, =SystemInit
+                 BLX     R0
+                 LDR     R0, =__main
+                 BX      R0
+                 ENDP
+
+; Dummy Exception Handlers (infinite loops which can be modified)
+
+NMI_Handler     PROC
+                EXPORT  NMI_Handler                      [WEAK]
+                B       .
+                ENDP
+HardFault_Handler\
+                PROC
+                EXPORT  HardFault_Handler                [WEAK]
+                B       .
+                ENDP
+MemManage_Handler\
+                PROC
+                EXPORT  MemManage_Handler                [WEAK]
+                B       .
+                ENDP
+BusFault_Handler\
+                PROC
+                EXPORT  BusFault_Handler                 [WEAK]
+                B       .
+                ENDP
+UsageFault_Handler\
+                PROC
+                EXPORT  UsageFault_Handler               [WEAK]
+                B       .
+                ENDP
+SVC_Handler     PROC
+                EXPORT  SVC_Handler                      [WEAK]
+                B       .
+                ENDP
+DebugMon_Handler\
+                PROC
+                EXPORT  DebugMon_Handler                 [WEAK]
+                B       .
+                ENDP
+PendSV_Handler  PROC
+                EXPORT  PendSV_Handler                   [WEAK]
+                B       .
+                ENDP
+SysTick_Handler PROC
+                EXPORT  SysTick_Handler                  [WEAK]
+                B       .
+                ENDP
+
+Default_Handler PROC
+
+                EXPORT  WWDG_IRQHandler                  [WEAK]
+                EXPORT  PVD_IRQHandler                   [WEAK]
+                EXPORT  TAMPER_IRQHandler                [WEAK]
+                EXPORT  RTC_IRQHandler                   [WEAK]
+                EXPORT  FLASH_IRQHandler                 [WEAK]
+                EXPORT  RCC_IRQHandler                   [WEAK]
+                EXPORT  EXTI0_IRQHandler                 [WEAK]
+                EXPORT  EXTI1_IRQHandler                 [WEAK]
+                EXPORT  EXTI2_IRQHandler                 [WEAK]
+                EXPORT  EXTI3_IRQHandler                 [WEAK]
+                EXPORT  EXTI4_IRQHandler                 [WEAK]
+                EXPORT  DMA1_Channel1_IRQHandler         [WEAK]
+                EXPORT  DMA1_Channel2_IRQHandler         [WEAK]
+                EXPORT  DMA1_Channel3_IRQHandler         [WEAK]
+                EXPORT  DMA1_Channel4_IRQHandler         [WEAK]
+                EXPORT  DMA1_Channel5_IRQHandler         [WEAK]
+                EXPORT  DMA1_Channel6_IRQHandler         [WEAK]
+                EXPORT  DMA1_Channel7_IRQHandler         [WEAK]
+                EXPORT  ADC1_IRQHandler                  [WEAK]
+                EXPORT  EXTI9_5_IRQHandler               [WEAK]
+                EXPORT  TIM1_BRK_TIM15_IRQHandler        [WEAK]
+                EXPORT  TIM1_UP_TIM16_IRQHandler         [WEAK]
+                EXPORT  TIM1_TRG_COM_TIM17_IRQHandler    [WEAK]
+                EXPORT  TIM1_CC_IRQHandler               [WEAK]
+                EXPORT  TIM2_IRQHandler                  [WEAK]
+                EXPORT  TIM3_IRQHandler                  [WEAK]
+                EXPORT  TIM4_IRQHandler                  [WEAK]
+                EXPORT  I2C1_EV_IRQHandler               [WEAK]
+                EXPORT  I2C1_ER_IRQHandler               [WEAK]
+                EXPORT  I2C2_EV_IRQHandler               [WEAK]
+                EXPORT  I2C2_ER_IRQHandler               [WEAK]
+                EXPORT  SPI1_IRQHandler                  [WEAK]
+                EXPORT  SPI2_IRQHandler                  [WEAK]
+                EXPORT  USART1_IRQHandler                [WEAK]
+                EXPORT  USART2_IRQHandler                [WEAK]
+                EXPORT  USART3_IRQHandler                [WEAK]
+                EXPORT  EXTI15_10_IRQHandler             [WEAK]
+                EXPORT  RTC_Alarm_IRQHandler              [WEAK]
+                EXPORT  CEC_IRQHandler                   [WEAK]
+                EXPORT  TIM6_DAC_IRQHandler              [WEAK]
+                EXPORT  TIM7_IRQHandler                  [WEAK]
+
+WWDG_IRQHandler
+PVD_IRQHandler
+TAMPER_IRQHandler
+RTC_IRQHandler
+FLASH_IRQHandler
+RCC_IRQHandler
+EXTI0_IRQHandler
+EXTI1_IRQHandler
+EXTI2_IRQHandler
+EXTI3_IRQHandler
+EXTI4_IRQHandler
+DMA1_Channel1_IRQHandler
+DMA1_Channel2_IRQHandler
+DMA1_Channel3_IRQHandler
+DMA1_Channel4_IRQHandler
+DMA1_Channel5_IRQHandler
+DMA1_Channel6_IRQHandler
+DMA1_Channel7_IRQHandler
+ADC1_IRQHandler
+EXTI9_5_IRQHandler
+TIM1_BRK_TIM15_IRQHandler
+TIM1_UP_TIM16_IRQHandler
+TIM1_TRG_COM_TIM17_IRQHandler
+TIM1_CC_IRQHandler
+TIM2_IRQHandler
+TIM3_IRQHandler
+TIM4_IRQHandler
+I2C1_EV_IRQHandler
+I2C1_ER_IRQHandler
+I2C2_EV_IRQHandler
+I2C2_ER_IRQHandler
+SPI1_IRQHandler
+SPI2_IRQHandler
+USART1_IRQHandler
+USART2_IRQHandler
+USART3_IRQHandler
+EXTI15_10_IRQHandler
+RTC_Alarm_IRQHandler
+CEC_IRQHandler
+TIM6_DAC_IRQHandler
+TIM7_IRQHandler
+                B       .
+
+                ENDP
+
+                ALIGN
+
+;*******************************************************************************
+; User Stack and Heap initialization
+;*******************************************************************************
+                 IF      :DEF:__MICROLIB           
+                
+                 EXPORT  __initial_sp
+                 EXPORT  __heap_base
+                 EXPORT  __heap_limit
+                
+                 ELSE
+                
+                 IMPORT  __use_two_region_memory
+                 EXPORT  __user_initial_stackheap
+                 
+__user_initial_stackheap
+
+                 LDR     R0, =  Heap_Mem
+                 LDR     R1, =(Stack_Mem + Stack_Size)
+                 LDR     R2, = (Heap_Mem +  Heap_Size)
+                 LDR     R3, = Stack_Mem
+                 BX      LR
+
+                 ALIGN
+
+                 ENDIF
+
+                 END
+
+;************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE*****

bsp/stm32f10x_HAL/Libraries/CMSIS/Device/ST/STM32F1xx/Source/Templates/arm/startup_stm32f100xe.s

@@ -0,0 +1,363 @@
+;******************** (C) COPYRIGHT 2017 STMicroelectronics ********************
+;* File Name          : startup_stm32f100xe.s
+;* Author             : MCD Application Team
+;* Version            : V4.2.0
+;* Date               : 31-March-2017
+;* Description        : STM32F100xE Devices vector table for MDK-ARM toolchain. 
+;*                      This module performs:
+;*                      - Set the initial SP
+;*                      - Set the initial PC == Reset_Handler
+;*                      - Set the vector table entries with the exceptions ISR address
+;*                      - Configure the clock system and also configure the external 
+;*                        SRAM mounted on STM32100E-EVAL board to be used as data 
+;*                        memory (optional, to be enabled by user)
+;*                      - Branches to __main in the C library (which eventually
+;*                        calls main()).
+;*                      After Reset the Cortex-M3 processor is in Thread mode,
+;*                      priority is Privileged, and the Stack is set to Main.
+;********************************************************************************
+;*
+;* <h2><center>&copy; COPYRIGHT(c) 2017 STMicroelectronics</center></h2>
+;*
+;* Redistribution and use in source and binary forms, with or without modification,
+;* are permitted provided that the following conditions are met:
+;*   1. Redistributions of source code must retain the above copyright notice,
+;*      this list of conditions and the following disclaimer.
+;*   2. Redistributions in binary form must reproduce the above copyright notice,
+;*      this list of conditions and the following disclaimer in the documentation
+;*      and/or other materials provided with the distribution.
+;*   3. Neither the name of STMicroelectronics nor the names of its contributors
+;*      may be used to endorse or promote products derived from this software
+;*      without specific prior written permission.
+;*
+;* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+;* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+;* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+;* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+;* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+;* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+;* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+;* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+;* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+;* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+; 
+;*******************************************************************************
+
+; Amount of memory (in bytes) allocated for Stack
+; Tailor this value to your application needs
+; <h> Stack Configuration
+;   <o> Stack Size (in Bytes) <0x0-0xFFFFFFFF:8>
+; </h>
+
+Stack_Size      EQU     0x00000400
+
+                AREA    STACK, NOINIT, READWRITE, ALIGN=3
+Stack_Mem       SPACE   Stack_Size
+__initial_sp
+
+
+; <h> Heap Configuration
+;   <o>  Heap Size (in Bytes) <0x0-0xFFFFFFFF:8>
+; </h>
+
+Heap_Size       EQU     0x00000200
+
+                AREA    HEAP, NOINIT, READWRITE, ALIGN=3
+__heap_base
+Heap_Mem        SPACE   Heap_Size
+__heap_limit
+
+                PRESERVE8
+                THUMB
+
+
+; Vector Table Mapped to Address 0 at Reset
+                AREA    RESET, DATA, READONLY
+                EXPORT  __Vectors
+                EXPORT  __Vectors_End
+                EXPORT  __Vectors_Size
+
+__Vectors       DCD     __initial_sp                    ; Top of Stack
+                DCD     Reset_Handler                   ; Reset Handler
+                DCD     NMI_Handler                     ; NMI Handler
+                DCD     HardFault_Handler               ; Hard Fault Handler
+                DCD     MemManage_Handler               ; MPU Fault Handler
+                DCD     BusFault_Handler                ; Bus Fault Handler
+                DCD     UsageFault_Handler              ; Usage Fault Handler
+                DCD     0                               ; Reserved
+                DCD     0                               ; Reserved
+                DCD     0                               ; Reserved
+                DCD     0                               ; Reserved
+                DCD     SVC_Handler                     ; SVCall Handler
+                DCD     DebugMon_Handler                ; Debug Monitor Handler
+                DCD     0                               ; Reserved
+                DCD     PendSV_Handler                  ; PendSV Handler
+                DCD     SysTick_Handler                 ; SysTick Handler
+
+                ; External Interrupts
+                DCD     WWDG_IRQHandler                 ; Window Watchdog
+                DCD     PVD_IRQHandler                  ; PVD through EXTI Line detect
+                DCD     TAMPER_IRQHandler               ; Tamper
+                DCD     RTC_IRQHandler                  ; RTC
+                DCD     FLASH_IRQHandler                ; Flash
+                DCD     RCC_IRQHandler                  ; RCC
+                DCD     EXTI0_IRQHandler                ; EXTI Line 0
+                DCD     EXTI1_IRQHandler                ; EXTI Line 1
+                DCD     EXTI2_IRQHandler                ; EXTI Line 2
+                DCD     EXTI3_IRQHandler                ; EXTI Line 3
+                DCD     EXTI4_IRQHandler                ; EXTI Line 4
+                DCD     DMA1_Channel1_IRQHandler        ; DMA1 Channel 1
+                DCD     DMA1_Channel2_IRQHandler        ; DMA1 Channel 2
+                DCD     DMA1_Channel3_IRQHandler        ; DMA1 Channel 3
+                DCD     DMA1_Channel4_IRQHandler        ; DMA1 Channel 4
+                DCD     DMA1_Channel5_IRQHandler        ; DMA1 Channel 5
+                DCD     DMA1_Channel6_IRQHandler        ; DMA1 Channel 6
+                DCD     DMA1_Channel7_IRQHandler        ; DMA1 Channel 7
+                DCD     ADC1_IRQHandler                 ; ADC1
+                DCD     0                               ; Reserved
+                DCD     0                               ; Reserved
+                DCD     0                               ; Reserved
+                DCD     0                               ; Reserved
+                DCD     EXTI9_5_IRQHandler              ; EXTI Line 9..5
+                DCD     TIM1_BRK_TIM15_IRQHandler       ; TIM1 Break and TIM15
+                DCD     TIM1_UP_TIM16_IRQHandler        ; TIM1 Update and TIM16
+                DCD     TIM1_TRG_COM_TIM17_IRQHandler   ; TIM1 Trigger and Commutation and TIM17
+                DCD     TIM1_CC_IRQHandler              ; TIM1 Capture Compare
+                DCD     TIM2_IRQHandler                 ; TIM2
+                DCD     TIM3_IRQHandler                 ; TIM3
+                DCD     TIM4_IRQHandler                 ; TIM4
+                DCD     I2C1_EV_IRQHandler              ; I2C1 Event
+                DCD     I2C1_ER_IRQHandler              ; I2C1 Error
+                DCD     I2C2_EV_IRQHandler              ; I2C2 Event
+                DCD     I2C2_ER_IRQHandler              ; I2C2 Error
+                DCD     SPI1_IRQHandler                 ; SPI1
+                DCD     SPI2_IRQHandler                 ; SPI2
+                DCD     USART1_IRQHandler               ; USART1
+                DCD     USART2_IRQHandler               ; USART2
+                DCD     USART3_IRQHandler               ; USART3
+                DCD     EXTI15_10_IRQHandler            ; EXTI Line 15..10
+                DCD     RTC_Alarm_IRQHandler             ; RTC Alarm through EXTI Line
+                DCD     CEC_IRQHandler                  ; HDMI CEC
+                DCD     TIM12_IRQHandler                ; TIM12
+                DCD     TIM13_IRQHandler                ; TIM13 
+                DCD     TIM14_IRQHandler                ; TIM14
+                DCD     0                               ; Reserved
+                DCD     0                               ; Reserved
+                DCD     0                               ; Reserved
+                DCD     0                               ; Reserved
+                DCD     TIM5_IRQHandler                 ; TIM5
+                DCD     SPI3_IRQHandler                 ; SPI3
+                DCD     UART4_IRQHandler                ; UART4
+                DCD     UART5_IRQHandler                ; UART5
+                DCD     TIM6_DAC_IRQHandler             ; TIM6 and DAC underrun
+                DCD     TIM7_IRQHandler                 ; TIM7
+                DCD     DMA2_Channel1_IRQHandler        ; DMA2 Channel1
+                DCD     DMA2_Channel2_IRQHandler        ; DMA2 Channel2
+                DCD     DMA2_Channel3_IRQHandler        ; DMA2 Channel3
+                DCD     DMA2_Channel4_5_IRQHandler      ; DMA2 Channel4 & Channel5
+                DCD     DMA2_Channel5_IRQHandler        ; DMA2 Channel5                
+__Vectors_End
+
+__Vectors_Size  EQU  __Vectors_End - __Vectors
+
+                AREA    |.text|, CODE, READONLY
+
+; Reset handler
+Reset_Handler    PROC
+                 EXPORT  Reset_Handler             [WEAK]
+     IMPORT  __main
+     IMPORT  SystemInit
+                 LDR     R0, =SystemInit
+                 BLX     R0
+                 LDR     R0, =__main
+                 BX      R0
+                 ENDP
+
+; Dummy Exception Handlers (infinite loops which can be modified)
+
+NMI_Handler     PROC
+                EXPORT  NMI_Handler                      [WEAK]
+                B       .
+                ENDP
+HardFault_Handler\
+                PROC
+                EXPORT  HardFault_Handler                [WEAK]
+                B       .
+                ENDP
+MemManage_Handler\
+                PROC
+                EXPORT  MemManage_Handler                [WEAK]
+                B       .
+                ENDP
+BusFault_Handler\
+                PROC
+                EXPORT  BusFault_Handler                 [WEAK]
+                B       .
+                ENDP
+UsageFault_Handler\
+                PROC
+                EXPORT  UsageFault_Handler               [WEAK]
+                B       .
+                ENDP
+SVC_Handler     PROC
+                EXPORT  SVC_Handler                      [WEAK]
+                B       .
+                ENDP
+DebugMon_Handler\
+                PROC
+                EXPORT  DebugMon_Handler                 [WEAK]
+                B       .
+                ENDP
+PendSV_Handler  PROC
+                EXPORT  PendSV_Handler                   [WEAK]
+                B       .
+                ENDP
+SysTick_Handler PROC
+                EXPORT  SysTick_Handler                  [WEAK]
+                B       .
+                ENDP
+
+Default_Handler PROC
+
+                EXPORT  WWDG_IRQHandler                  [WEAK]
+                EXPORT  PVD_IRQHandler                   [WEAK]
+                EXPORT  TAMPER_IRQHandler                [WEAK]
+                EXPORT  RTC_IRQHandler                   [WEAK]
+                EXPORT  FLASH_IRQHandler                 [WEAK]
+                EXPORT  RCC_IRQHandler                   [WEAK]
+                EXPORT  EXTI0_IRQHandler                 [WEAK]
+                EXPORT  EXTI1_IRQHandler                 [WEAK]
+                EXPORT  EXTI2_IRQHandler                 [WEAK]
+                EXPORT  EXTI3_IRQHandler                 [WEAK]
+                EXPORT  EXTI4_IRQHandler                 [WEAK]
+                EXPORT  DMA1_Channel1_IRQHandler         [WEAK]
+                EXPORT  DMA1_Channel2_IRQHandler         [WEAK]
+                EXPORT  DMA1_Channel3_IRQHandler         [WEAK]
+                EXPORT  DMA1_Channel4_IRQHandler         [WEAK]
+                EXPORT  DMA1_Channel5_IRQHandler         [WEAK]
+                EXPORT  DMA1_Channel6_IRQHandler         [WEAK]
+                EXPORT  DMA1_Channel7_IRQHandler         [WEAK]
+                EXPORT  ADC1_IRQHandler                  [WEAK]
+                EXPORT  EXTI9_5_IRQHandler               [WEAK]
+                EXPORT  TIM1_BRK_TIM15_IRQHandler        [WEAK]
+                EXPORT  TIM1_UP_TIM16_IRQHandler         [WEAK]
+                EXPORT  TIM1_TRG_COM_TIM17_IRQHandler    [WEAK]
+                EXPORT  TIM1_CC_IRQHandler               [WEAK]
+                EXPORT  TIM2_IRQHandler                  [WEAK]
+                EXPORT  TIM3_IRQHandler                  [WEAK]
+                EXPORT  TIM4_IRQHandler                  [WEAK]
+                EXPORT  I2C1_EV_IRQHandler               [WEAK]
+                EXPORT  I2C1_ER_IRQHandler               [WEAK]
+                EXPORT  I2C2_EV_IRQHandler               [WEAK]
+                EXPORT  I2C2_ER_IRQHandler               [WEAK]
+                EXPORT  SPI1_IRQHandler                  [WEAK]
+                EXPORT  SPI2_IRQHandler                  [WEAK]
+                EXPORT  USART1_IRQHandler                [WEAK]
+                EXPORT  USART2_IRQHandler                [WEAK]
+                EXPORT  USART3_IRQHandler                [WEAK]
+                EXPORT  EXTI15_10_IRQHandler             [WEAK]
+                EXPORT  RTC_Alarm_IRQHandler             [WEAK]
+                EXPORT  CEC_IRQHandler                   [WEAK]
+                EXPORT  TIM12_IRQHandler                 [WEAK]
+                EXPORT  TIM13_IRQHandler                 [WEAK]
+                EXPORT  TIM14_IRQHandler                 [WEAK]
+                EXPORT  TIM5_IRQHandler                  [WEAK]
+                EXPORT  SPI3_IRQHandler                  [WEAK]
+                EXPORT  UART4_IRQHandler                 [WEAK]
+                EXPORT  UART5_IRQHandler                 [WEAK]
+                EXPORT  TIM6_DAC_IRQHandler              [WEAK]
+                EXPORT  TIM7_IRQHandler                  [WEAK]
+                EXPORT  DMA2_Channel1_IRQHandler         [WEAK]
+                EXPORT  DMA2_Channel2_IRQHandler         [WEAK]
+                EXPORT  DMA2_Channel3_IRQHandler         [WEAK]
+                EXPORT  DMA2_Channel4_5_IRQHandler       [WEAK]
+                EXPORT  DMA2_Channel5_IRQHandler         [WEAK]
+
+WWDG_IRQHandler
+PVD_IRQHandler
+TAMPER_IRQHandler
+RTC_IRQHandler
+FLASH_IRQHandler
+RCC_IRQHandler
+EXTI0_IRQHandler
+EXTI1_IRQHandler
+EXTI2_IRQHandler
+EXTI3_IRQHandler
+EXTI4_IRQHandler
+DMA1_Channel1_IRQHandler
+DMA1_Channel2_IRQHandler
+DMA1_Channel3_IRQHandler
+DMA1_Channel4_IRQHandler
+DMA1_Channel5_IRQHandler
+DMA1_Channel6_IRQHandler
+DMA1_Channel7_IRQHandler
+ADC1_IRQHandler
+EXTI9_5_IRQHandler
+TIM1_BRK_TIM15_IRQHandler
+TIM1_UP_TIM16_IRQHandler
+TIM1_TRG_COM_TIM17_IRQHandler
+TIM1_CC_IRQHandler
+TIM2_IRQHandler
+TIM3_IRQHandler
+TIM4_IRQHandler
+I2C1_EV_IRQHandler
+I2C1_ER_IRQHandler
+I2C2_EV_IRQHandler
+I2C2_ER_IRQHandler
+SPI1_IRQHandler
+SPI2_IRQHandler
+USART1_IRQHandler
+USART2_IRQHandler
+USART3_IRQHandler
+EXTI15_10_IRQHandler
+RTC_Alarm_IRQHandler
+CEC_IRQHandler
+TIM12_IRQHandler
+TIM13_IRQHandler
+TIM14_IRQHandler
+TIM5_IRQHandler
+SPI3_IRQHandler
+UART4_IRQHandler
+UART5_IRQHandler
+TIM6_DAC_IRQHandler
+TIM7_IRQHandler
+DMA2_Channel1_IRQHandler
+DMA2_Channel2_IRQHandler
+DMA2_Channel3_IRQHandler
+DMA2_Channel4_5_IRQHandler
+DMA2_Channel5_IRQHandler
+                B       .
+
+                ENDP
+
+                ALIGN
+
+;*******************************************************************************
+; User Stack and Heap initialization
+;*******************************************************************************
+                 IF      :DEF:__MICROLIB           
+                
+                 EXPORT  __initial_sp
+                 EXPORT  __heap_base
+                 EXPORT  __heap_limit
+                
+                 ELSE
+                
+                 IMPORT  __use_two_region_memory
+                 EXPORT  __user_initial_stackheap
+                 
+__user_initial_stackheap
+
+                 LDR     R0, =  Heap_Mem
+                 LDR     R1, =(Stack_Mem + Stack_Size)
+                 LDR     R2, = (Heap_Mem +  Heap_Size)
+                 LDR     R3, = Stack_Mem
+                 BX      LR
+
+                 ALIGN
+
+                 ENDIF
+
+                 END
+
+;************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE*****

bsp/stm32f10x_HAL/Libraries/CMSIS/Device/ST/STM32F1xx/Source/Templates/arm/startup_stm32f101x6.s

@@ -0,0 +1,295 @@
+;******************** (C) COPYRIGHT 2017 STMicroelectronics ********************
+;* File Name          : startup_stm32f101x6.s
+;* Author             : MCD Application Team
+;* Version            : V4.2.0
+;* Date               : 31-March-2017
+;* Description        : STM32F101x6 Devices vector table for MDK-ARM toolchain. 
+;*                      This module performs:
+;*                      - Set the initial SP
+;*                      - Set the initial PC == Reset_Handler
+;*                      - Set the vector table entries with the exceptions ISR address
+;*                      - Configure the clock system
+;*                      - Branches to __main in the C library (which eventually
+;*                        calls main()).
+;*                      After Reset the Cortex-M3 processor is in Thread mode,
+;*                      priority is Privileged, and the Stack is set to Main.
+;********************************************************************************
+;*
+;* <h2><center>&copy; COPYRIGHT(c) 2017 STMicroelectronics</center></h2>
+;*
+;* Redistribution and use in source and binary forms, with or without modification,
+;* are permitted provided that the following conditions are met:
+;*   1. Redistributions of source code must retain the above copyright notice,
+;*      this list of conditions and the following disclaimer.
+;*   2. Redistributions in binary form must reproduce the above copyright notice,
+;*      this list of conditions and the following disclaimer in the documentation
+;*      and/or other materials provided with the distribution.
+;*   3. Neither the name of STMicroelectronics nor the names of its contributors
+;*      may be used to endorse or promote products derived from this software
+;*      without specific prior written permission.
+;*
+;* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+;* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+;* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+;* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+;* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+;* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+;* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+;* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+;* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+;* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+; 
+;*******************************************************************************
+
+; Amount of memory (in bytes) allocated for Stack
+; Tailor this value to your application needs
+; <h> Stack Configuration
+;   <o> Stack Size (in Bytes) <0x0-0xFFFFFFFF:8>
+; </h>
+
+Stack_Size      EQU     0x00000400
+
+                AREA    STACK, NOINIT, READWRITE, ALIGN=3
+Stack_Mem       SPACE   Stack_Size
+__initial_sp
+
+
+; <h> Heap Configuration
+;   <o>  Heap Size (in Bytes) <0x0-0xFFFFFFFF:8>
+; </h>
+
+Heap_Size       EQU     0x00000200
+
+                AREA    HEAP, NOINIT, READWRITE, ALIGN=3
+__heap_base
+Heap_Mem        SPACE   Heap_Size
+__heap_limit
+
+                PRESERVE8
+                THUMB
+
+
+; Vector Table Mapped to Address 0 at Reset
+                AREA    RESET, DATA, READONLY
+                EXPORT  __Vectors
+                EXPORT  __Vectors_End
+                EXPORT  __Vectors_Size
+
+__Vectors       DCD     __initial_sp               ; Top of Stack
+                DCD     Reset_Handler              ; Reset Handler
+                DCD     NMI_Handler                ; NMI Handler
+                DCD     HardFault_Handler          ; Hard Fault Handler
+                DCD     MemManage_Handler          ; MPU Fault Handler
+                DCD     BusFault_Handler           ; Bus Fault Handler
+                DCD     UsageFault_Handler         ; Usage Fault Handler
+                DCD     0                          ; Reserved
+                DCD     0                          ; Reserved
+                DCD     0                          ; Reserved
+                DCD     0                          ; Reserved
+                DCD     SVC_Handler                ; SVCall Handler
+                DCD     DebugMon_Handler           ; Debug Monitor Handler
+                DCD     0                          ; Reserved
+                DCD     PendSV_Handler             ; PendSV Handler
+                DCD     SysTick_Handler            ; SysTick Handler
+
+                ; External Interrupts
+                DCD     WWDG_IRQHandler            ; Window Watchdog
+                DCD     PVD_IRQHandler             ; PVD through EXTI Line detect
+                DCD     TAMPER_IRQHandler          ; Tamper
+                DCD     RTC_IRQHandler             ; RTC
+                DCD     FLASH_IRQHandler           ; Flash
+                DCD     RCC_IRQHandler             ; RCC
+                DCD     EXTI0_IRQHandler           ; EXTI Line 0
+                DCD     EXTI1_IRQHandler           ; EXTI Line 1
+                DCD     EXTI2_IRQHandler           ; EXTI Line 2
+                DCD     EXTI3_IRQHandler           ; EXTI Line 3
+                DCD     EXTI4_IRQHandler           ; EXTI Line 4
+                DCD     DMA1_Channel1_IRQHandler   ; DMA1 Channel 1
+                DCD     DMA1_Channel2_IRQHandler   ; DMA1 Channel 2
+                DCD     DMA1_Channel3_IRQHandler   ; DMA1 Channel 3
+                DCD     DMA1_Channel4_IRQHandler   ; DMA1 Channel 4
+                DCD     DMA1_Channel5_IRQHandler   ; DMA1 Channel 5
+                DCD     DMA1_Channel6_IRQHandler   ; DMA1 Channel 6
+                DCD     DMA1_Channel7_IRQHandler   ; DMA1 Channel 7
+                DCD     ADC1_IRQHandler            ; ADC1
+                DCD     0                          ; Reserved
+                DCD     0                          ; Reserved
+                DCD     0                          ; Reserved
+                DCD     0                          ; Reserved
+                DCD     EXTI9_5_IRQHandler         ; EXTI Line 9..5
+                DCD     0                          ; Reserved
+                DCD     0                          ; Reserved
+                DCD     0                          ; Reserved
+                DCD     0                          ; Reserved
+                DCD     TIM2_IRQHandler            ; TIM2
+                DCD     TIM3_IRQHandler            ; TIM3
+                DCD     0                          ; Reserved
+                DCD     I2C1_EV_IRQHandler         ; I2C1 Event
+                DCD     I2C1_ER_IRQHandler         ; I2C1 Error
+                DCD     0                          ; Reserved
+                DCD     0                          ; Reserved
+                DCD     SPI1_IRQHandler            ; SPI1
+                DCD     0                          ; Reserved
+                DCD     USART1_IRQHandler          ; USART1
+                DCD     USART2_IRQHandler          ; USART2
+                DCD     0                          ; Reserved
+                DCD     EXTI15_10_IRQHandler       ; EXTI Line 15..10
+                DCD     RTC_Alarm_IRQHandler        ; RTC Alarm through EXTI Line
+__Vectors_End
+
+__Vectors_Size  EQU  __Vectors_End - __Vectors
+
+                AREA    |.text|, CODE, READONLY
+
+; Reset handler routine
+Reset_Handler    PROC
+                 EXPORT  Reset_Handler             [WEAK]
+     IMPORT  __main
+     IMPORT  SystemInit
+                 LDR     R0, =SystemInit
+                 BLX     R0
+                 LDR     R0, =__main
+                 BX      R0
+                 ENDP
+
+; Dummy Exception Handlers (infinite loops which can be modified)
+
+NMI_Handler     PROC
+                EXPORT  NMI_Handler                [WEAK]
+                B       .
+                ENDP
+HardFault_Handler\
+                PROC
+                EXPORT  HardFault_Handler          [WEAK]
+                B       .
+                ENDP
+MemManage_Handler\
+                PROC
+                EXPORT  MemManage_Handler          [WEAK]
+                B       .
+                ENDP
+BusFault_Handler\
+                PROC
+                EXPORT  BusFault_Handler           [WEAK]
+                B       .
+                ENDP
+UsageFault_Handler\
+                PROC
+                EXPORT  UsageFault_Handler         [WEAK]
+                B       .
+                ENDP
+SVC_Handler     PROC
+                EXPORT  SVC_Handler                [WEAK]
+                B       .
+                ENDP
+DebugMon_Handler\
+                PROC
+                EXPORT  DebugMon_Handler           [WEAK]
+                B       .
+                ENDP
+PendSV_Handler  PROC
+                EXPORT  PendSV_Handler             [WEAK]
+                B       .
+                ENDP
+SysTick_Handler PROC
+                EXPORT  SysTick_Handler            [WEAK]
+                B       .
+                ENDP
+
+Default_Handler PROC
+
+                EXPORT  WWDG_IRQHandler            [WEAK]
+                EXPORT  PVD_IRQHandler             [WEAK]
+                EXPORT  TAMPER_IRQHandler          [WEAK]
+                EXPORT  RTC_IRQHandler             [WEAK]
+                EXPORT  FLASH_IRQHandler           [WEAK]
+                EXPORT  RCC_IRQHandler             [WEAK]
+                EXPORT  EXTI0_IRQHandler           [WEAK]
+                EXPORT  EXTI1_IRQHandler           [WEAK]
+                EXPORT  EXTI2_IRQHandler           [WEAK]
+                EXPORT  EXTI3_IRQHandler           [WEAK]
+                EXPORT  EXTI4_IRQHandler           [WEAK]
+                EXPORT  DMA1_Channel1_IRQHandler   [WEAK]
+                EXPORT  DMA1_Channel2_IRQHandler   [WEAK]
+                EXPORT  DMA1_Channel3_IRQHandler   [WEAK]
+                EXPORT  DMA1_Channel4_IRQHandler   [WEAK]
+                EXPORT  DMA1_Channel5_IRQHandler   [WEAK]
+                EXPORT  DMA1_Channel6_IRQHandler   [WEAK]
+                EXPORT  DMA1_Channel7_IRQHandler   [WEAK]
+                EXPORT  ADC1_IRQHandler            [WEAK]            
+                EXPORT  EXTI9_5_IRQHandler         [WEAK]
+                EXPORT  TIM2_IRQHandler            [WEAK]
+                EXPORT  TIM3_IRQHandler            [WEAK]
+                EXPORT  I2C1_EV_IRQHandler         [WEAK]
+                EXPORT  I2C1_ER_IRQHandler         [WEAK]
+                EXPORT  SPI1_IRQHandler            [WEAK]
+                EXPORT  USART1_IRQHandler          [WEAK]
+                EXPORT  USART2_IRQHandler          [WEAK]
+                EXPORT  EXTI15_10_IRQHandler       [WEAK]
+                EXPORT  RTC_Alarm_IRQHandler       [WEAK]
+
+WWDG_IRQHandler
+PVD_IRQHandler
+TAMPER_IRQHandler
+RTC_IRQHandler
+FLASH_IRQHandler
+RCC_IRQHandler
+EXTI0_IRQHandler
+EXTI1_IRQHandler
+EXTI2_IRQHandler
+EXTI3_IRQHandler
+EXTI4_IRQHandler
+DMA1_Channel1_IRQHandler
+DMA1_Channel2_IRQHandler
+DMA1_Channel3_IRQHandler
+DMA1_Channel4_IRQHandler
+DMA1_Channel5_IRQHandler
+DMA1_Channel6_IRQHandler
+DMA1_Channel7_IRQHandler
+ADC1_IRQHandler
+EXTI9_5_IRQHandler
+TIM2_IRQHandler
+TIM3_IRQHandler
+I2C1_EV_IRQHandler
+I2C1_ER_IRQHandler
+SPI1_IRQHandler
+USART1_IRQHandler
+USART2_IRQHandler
+EXTI15_10_IRQHandler
+RTC_Alarm_IRQHandler
+
+                B       .
+
+                ENDP
+
+                ALIGN
+
+;*******************************************************************************
+; User Stack and Heap initialization
+;*******************************************************************************
+                 IF      :DEF:__MICROLIB
+                
+                 EXPORT  __initial_sp
+                 EXPORT  __heap_base
+                 EXPORT  __heap_limit
+                
+                 ELSE
+                
+                 IMPORT  __use_two_region_memory
+                 EXPORT  __user_initial_stackheap
+                 
+__user_initial_stackheap
+
+                 LDR     R0, =  Heap_Mem
+                 LDR     R1, =(Stack_Mem + Stack_Size)
+                 LDR     R2, = (Heap_Mem +  Heap_Size)
+                 LDR     R3, = Stack_Mem
+                 BX      LR
+
+                 ALIGN
+
+                 ENDIF
+
+                 END
+
+;************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE*****

bsp/stm32f10x_HAL/Libraries/CMSIS/Device/ST/STM32F1xx/Source/Templates/arm/startup_stm32f101xb.s

@@ -0,0 +1,305 @@
+;******************** (C) COPYRIGHT 2017 STMicroelectronics ********************
+;* File Name          : startup_stm32f101xb.s
+;* Author             : MCD Application Team
+;* Version            : V4.2.0
+;* Date               : 31-March-2017
+;* Description        : STM32F101xB Devices vector table for MDK-ARM toolchain. 
+;*                      This module performs:
+;*                      - Set the initial SP
+;*                      - Set the initial PC == Reset_Handler
+;*                      - Set the vector table entries with the exceptions ISR address
+;*                      - Configure the clock system
+;*                      - Branches to __main in the C library (which eventually
+;*                        calls main()).
+;*                      After Reset the Cortex-M3 processor is in Thread mode,
+;*                      priority is Privileged, and the Stack is set to Main.
+;********************************************************************************
+;*
+;* <h2><center>&copy; COPYRIGHT(c) 2017 STMicroelectronics</center></h2>
+;*
+;* Redistribution and use in source and binary forms, with or without modification,
+;* are permitted provided that the following conditions are met:
+;*   1. Redistributions of source code must retain the above copyright notice,
+;*      this list of conditions and the following disclaimer.
+;*   2. Redistributions in binary form must reproduce the above copyright notice,
+;*      this list of conditions and the following disclaimer in the documentation
+;*      and/or other materials provided with the distribution.
+;*   3. Neither the name of STMicroelectronics nor the names of its contributors
+;*      may be used to endorse or promote products derived from this software
+;*      without specific prior written permission.
+;*
+;* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+;* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+;* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+;* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+;* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+;* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+;* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+;* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+;* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+;* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+; 
+;*******************************************************************************
+
+; Amount of memory (in bytes) allocated for Stack
+; Tailor this value to your application needs
+; <h> Stack Configuration
+;   <o> Stack Size (in Bytes) <0x0-0xFFFFFFFF:8>
+; </h>
+
+Stack_Size      EQU     0x00000400
+
+                AREA    STACK, NOINIT, READWRITE, ALIGN=3
+Stack_Mem       SPACE   Stack_Size
+__initial_sp
+
+
+; <h> Heap Configuration
+;   <o>  Heap Size (in Bytes) <0x0-0xFFFFFFFF:8>
+; </h>
+
+Heap_Size       EQU     0x00000200
+
+                AREA    HEAP, NOINIT, READWRITE, ALIGN=3
+__heap_base
+Heap_Mem        SPACE   Heap_Size
+__heap_limit
+
+                PRESERVE8
+                THUMB
+
+
+; Vector Table Mapped to Address 0 at Reset
+                AREA    RESET, DATA, READONLY
+                EXPORT  __Vectors
+                EXPORT  __Vectors_End
+                EXPORT  __Vectors_Size
+
+__Vectors       DCD     __initial_sp               ; Top of Stack
+                DCD     Reset_Handler              ; Reset Handler
+                DCD     NMI_Handler                ; NMI Handler
+                DCD     HardFault_Handler          ; Hard Fault Handler
+                DCD     MemManage_Handler          ; MPU Fault Handler
+                DCD     BusFault_Handler           ; Bus Fault Handler
+                DCD     UsageFault_Handler         ; Usage Fault Handler
+                DCD     0                          ; Reserved
+                DCD     0                          ; Reserved
+                DCD     0                          ; Reserved
+                DCD     0                          ; Reserved
+                DCD     SVC_Handler                ; SVCall Handler
+                DCD     DebugMon_Handler           ; Debug Monitor Handler
+                DCD     0                          ; Reserved
+                DCD     PendSV_Handler             ; PendSV Handler
+                DCD     SysTick_Handler            ; SysTick Handler
+
+                ; External Interrupts
+                DCD     WWDG_IRQHandler            ; Window Watchdog
+                DCD     PVD_IRQHandler             ; PVD through EXTI Line detect
+                DCD     TAMPER_IRQHandler          ; Tamper
+                DCD     RTC_IRQHandler             ; RTC
+                DCD     FLASH_IRQHandler           ; Flash
+                DCD     RCC_IRQHandler             ; RCC
+                DCD     EXTI0_IRQHandler           ; EXTI Line 0
+                DCD     EXTI1_IRQHandler           ; EXTI Line 1
+                DCD     EXTI2_IRQHandler           ; EXTI Line 2
+                DCD     EXTI3_IRQHandler           ; EXTI Line 3
+                DCD     EXTI4_IRQHandler           ; EXTI Line 4
+                DCD     DMA1_Channel1_IRQHandler   ; DMA1 Channel 1
+                DCD     DMA1_Channel2_IRQHandler   ; DMA1 Channel 2
+                DCD     DMA1_Channel3_IRQHandler   ; DMA1 Channel 3
+                DCD     DMA1_Channel4_IRQHandler   ; DMA1 Channel 4
+                DCD     DMA1_Channel5_IRQHandler   ; DMA1 Channel 5
+                DCD     DMA1_Channel6_IRQHandler   ; DMA1 Channel 6
+                DCD     DMA1_Channel7_IRQHandler   ; DMA1 Channel 7
+                DCD     ADC1_IRQHandler            ; ADC1
+                DCD     0                          ; Reserved
+                DCD     0                          ; Reserved
+                DCD     0                          ; Reserved
+                DCD     0                          ; Reserved
+                DCD     EXTI9_5_IRQHandler         ; EXTI Line 9..5
+                DCD     0                          ; Reserved
+                DCD     0                          ; Reserved
+                DCD     0                          ; Reserved
+                DCD     0                          ; Reserved
+                DCD     TIM2_IRQHandler            ; TIM2
+                DCD     TIM3_IRQHandler            ; TIM3
+                DCD     TIM4_IRQHandler            ; TIM4
+                DCD     I2C1_EV_IRQHandler         ; I2C1 Event
+                DCD     I2C1_ER_IRQHandler         ; I2C1 Error
+                DCD     I2C2_EV_IRQHandler         ; I2C2 Event
+                DCD     I2C2_ER_IRQHandler         ; I2C2 Error
+                DCD     SPI1_IRQHandler            ; SPI1
+                DCD     SPI2_IRQHandler            ; SPI2
+                DCD     USART1_IRQHandler          ; USART1
+                DCD     USART2_IRQHandler          ; USART2
+                DCD     USART3_IRQHandler          ; USART3
+                DCD     EXTI15_10_IRQHandler       ; EXTI Line 15..10
+                DCD     RTC_Alarm_IRQHandler        ; RTC Alarm through EXTI Line
+__Vectors_End
+
+__Vectors_Size  EQU  __Vectors_End - __Vectors
+
+                AREA    |.text|, CODE, READONLY
+
+; Reset handler
+Reset_Handler    PROC
+                 EXPORT  Reset_Handler             [WEAK]
+     IMPORT  __main
+     IMPORT  SystemInit
+                 LDR     R0, =SystemInit
+                 BLX     R0
+                 LDR     R0, =__main
+                 BX      R0
+                 ENDP
+
+; Dummy Exception Handlers (infinite loops which can be modified)
+
+NMI_Handler     PROC
+                EXPORT  NMI_Handler                [WEAK]
+                B       .
+                ENDP
+HardFault_Handler\
+                PROC
+                EXPORT  HardFault_Handler          [WEAK]
+                B       .
+                ENDP
+MemManage_Handler\
+                PROC
+                EXPORT  MemManage_Handler          [WEAK]
+                B       .
+                ENDP
+BusFault_Handler\
+                PROC
+                EXPORT  BusFault_Handler           [WEAK]
+                B       .
+                ENDP
+UsageFault_Handler\
+                PROC
+                EXPORT  UsageFault_Handler         [WEAK]
+                B       .
+                ENDP
+SVC_Handler     PROC
+                EXPORT  SVC_Handler                [WEAK]
+                B       .
+                ENDP
+DebugMon_Handler\
+                PROC
+                EXPORT  DebugMon_Handler           [WEAK]
+                B       .
+                ENDP
+PendSV_Handler  PROC
+                EXPORT  PendSV_Handler             [WEAK]
+                B       .
+                ENDP
+SysTick_Handler PROC
+                EXPORT  SysTick_Handler            [WEAK]
+                B       .
+                ENDP
+
+Default_Handler PROC
+
+                EXPORT  WWDG_IRQHandler            [WEAK]
+                EXPORT  PVD_IRQHandler             [WEAK]
+                EXPORT  TAMPER_IRQHandler          [WEAK]
+                EXPORT  RTC_IRQHandler             [WEAK]
+                EXPORT  FLASH_IRQHandler           [WEAK]
+                EXPORT  RCC_IRQHandler             [WEAK]
+                EXPORT  EXTI0_IRQHandler           [WEAK]
+                EXPORT  EXTI1_IRQHandler           [WEAK]
+                EXPORT  EXTI2_IRQHandler           [WEAK]
+                EXPORT  EXTI3_IRQHandler           [WEAK]
+                EXPORT  EXTI4_IRQHandler           [WEAK]
+                EXPORT  DMA1_Channel1_IRQHandler   [WEAK]
+                EXPORT  DMA1_Channel2_IRQHandler   [WEAK]
+                EXPORT  DMA1_Channel3_IRQHandler   [WEAK]
+                EXPORT  DMA1_Channel4_IRQHandler   [WEAK]
+                EXPORT  DMA1_Channel5_IRQHandler   [WEAK]
+                EXPORT  DMA1_Channel6_IRQHandler   [WEAK]
+                EXPORT  DMA1_Channel7_IRQHandler   [WEAK]
+                EXPORT  ADC1_IRQHandler            [WEAK]
+                EXPORT  EXTI9_5_IRQHandler         [WEAK]
+                EXPORT  TIM2_IRQHandler            [WEAK]
+                EXPORT  TIM3_IRQHandler            [WEAK]
+                EXPORT  TIM4_IRQHandler            [WEAK]
+                EXPORT  I2C1_EV_IRQHandler         [WEAK]
+                EXPORT  I2C1_ER_IRQHandler         [WEAK]
+                EXPORT  I2C2_EV_IRQHandler         [WEAK]
+                EXPORT  I2C2_ER_IRQHandler         [WEAK]
+                EXPORT  SPI1_IRQHandler            [WEAK]
+                EXPORT  SPI2_IRQHandler            [WEAK]
+                EXPORT  USART1_IRQHandler          [WEAK]
+                EXPORT  USART2_IRQHandler          [WEAK]
+                EXPORT  USART3_IRQHandler          [WEAK]
+                EXPORT  EXTI15_10_IRQHandler       [WEAK]
+                EXPORT  RTC_Alarm_IRQHandler       [WEAK]
+
+WWDG_IRQHandler
+PVD_IRQHandler
+TAMPER_IRQHandler
+RTC_IRQHandler
+FLASH_IRQHandler
+RCC_IRQHandler
+EXTI0_IRQHandler
+EXTI1_IRQHandler
+EXTI2_IRQHandler
+EXTI3_IRQHandler
+EXTI4_IRQHandler
+DMA1_Channel1_IRQHandler
+DMA1_Channel2_IRQHandler
+DMA1_Channel3_IRQHandler
+DMA1_Channel4_IRQHandler
+DMA1_Channel5_IRQHandler
+DMA1_Channel6_IRQHandler
+DMA1_Channel7_IRQHandler
+ADC1_IRQHandler
+EXTI9_5_IRQHandler
+TIM2_IRQHandler
+TIM3_IRQHandler
+TIM4_IRQHandler
+I2C1_EV_IRQHandler
+I2C1_ER_IRQHandler
+I2C2_EV_IRQHandler
+I2C2_ER_IRQHandler
+SPI1_IRQHandler
+SPI2_IRQHandler
+USART1_IRQHandler
+USART2_IRQHandler
+USART3_IRQHandler
+EXTI15_10_IRQHandler
+RTC_Alarm_IRQHandler
+
+                B       .
+
+                ENDP
+
+                ALIGN
+
+;*******************************************************************************
+; User Stack and Heap initialization
+;*******************************************************************************
+                 IF      :DEF:__MICROLIB           
+                
+                 EXPORT  __initial_sp
+                 EXPORT  __heap_base
+                 EXPORT  __heap_limit
+                
+                 ELSE
+                
+                 IMPORT  __use_two_region_memory
+                 EXPORT  __user_initial_stackheap
+                 
+__user_initial_stackheap
+
+                 LDR     R0, =  Heap_Mem
+                 LDR     R1, =(Stack_Mem + Stack_Size)
+                 LDR     R2, = (Heap_Mem +  Heap_Size)
+                 LDR     R3, = Stack_Mem
+                 BX      LR
+
+                 ALIGN
+
+                 ENDIF
+
+                 END
+
+;************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE*****

bsp/stm32f10x_HAL/Libraries/CMSIS/Device/ST/STM32F1xx/Source/Templates/arm/startup_stm32f101xe.s

@@ -0,0 +1,343 @@
+;******************** (C) COPYRIGHT 2017 STMicroelectronics ********************
+;* File Name          : startup_stm32f101xe.s
+;* Author             : MCD Application Team
+;* Version            : V4.2.0
+;* Date               : 31-March-2017
+;* Description        : STM32F101xE Devices vector table for MDK-ARM toolchain. 
+;*                      This module performs:
+;*                      - Set the initial SP
+;*                      - Set the initial PC == Reset_Handler
+;*                      - Set the vector table entries with the exceptions ISR address
+;*                      - Configure the clock system
+;*                      - Branches to __main in the C library (which eventually
+;*                        calls main()).
+;*                      After Reset the Cortex-M3 processor is in Thread mode,
+;*                      priority is Privileged, and the Stack is set to Main.
+;********************************************************************************
+;*
+;* <h2><center>&copy; COPYRIGHT(c) 2017 STMicroelectronics</center></h2>
+;*
+;* Redistribution and use in source and binary forms, with or without modification,
+;* are permitted provided that the following conditions are met:
+;*   1. Redistributions of source code must retain the above copyright notice,
+;*      this list of conditions and the following disclaimer.
+;*   2. Redistributions in binary form must reproduce the above copyright notice,
+;*      this list of conditions and the following disclaimer in the documentation
+;*      and/or other materials provided with the distribution.
+;*   3. Neither the name of STMicroelectronics nor the names of its contributors
+;*      may be used to endorse or promote products derived from this software
+;*      without specific prior written permission.
+;*
+;* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+;* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+;* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+;* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+;* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+;* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+;* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+;* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+;* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+;* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+; 
+;*******************************************************************************
+
+; Amount of memory (in bytes) allocated for Stack
+; Tailor this value to your application needs
+; <h> Stack Configuration
+;   <o> Stack Size (in Bytes) <0x0-0xFFFFFFFF:8>
+; </h>
+
+Stack_Size      EQU     0x00000400
+
+                AREA    STACK, NOINIT, READWRITE, ALIGN=3
+Stack_Mem       SPACE   Stack_Size
+__initial_sp
+                                                  
+; <h> Heap Configuration
+;   <o>  Heap Size (in Bytes) <0x0-0xFFFFFFFF:8>
+; </h>
+
+Heap_Size       EQU     0x00000200
+
+                AREA    HEAP, NOINIT, READWRITE, ALIGN=3
+__heap_base
+Heap_Mem        SPACE   Heap_Size
+__heap_limit
+
+                PRESERVE8
+                THUMB
+
+
+; Vector Table Mapped to Address 0 at Reset
+                AREA    RESET, DATA, READONLY
+                EXPORT  __Vectors
+                EXPORT  __Vectors_End
+                EXPORT  __Vectors_Size
+
+__Vectors       DCD     __initial_sp               ; Top of Stack
+                DCD     Reset_Handler              ; Reset Handler
+                DCD     NMI_Handler                ; NMI Handler
+                DCD     HardFault_Handler          ; Hard Fault Handler
+                DCD     MemManage_Handler          ; MPU Fault Handler
+                DCD     BusFault_Handler           ; Bus Fault Handler
+                DCD     UsageFault_Handler         ; Usage Fault Handler
+                DCD     0                          ; Reserved
+                DCD     0                          ; Reserved
+                DCD     0                          ; Reserved
+                DCD     0                          ; Reserved
+                DCD     SVC_Handler                ; SVCall Handler
+                DCD     DebugMon_Handler           ; Debug Monitor Handler
+                DCD     0                          ; Reserved
+                DCD     PendSV_Handler             ; PendSV Handler
+                DCD     SysTick_Handler            ; SysTick Handler
+
+                ; External Interrupts
+                DCD     WWDG_IRQHandler            ; Window Watchdog
+                DCD     PVD_IRQHandler             ; PVD through EXTI Line detect
+                DCD     TAMPER_IRQHandler          ; Tamper
+                DCD     RTC_IRQHandler             ; RTC
+                DCD     FLASH_IRQHandler           ; Flash
+                DCD     RCC_IRQHandler             ; RCC
+                DCD     EXTI0_IRQHandler           ; EXTI Line 0
+                DCD     EXTI1_IRQHandler           ; EXTI Line 1
+                DCD     EXTI2_IRQHandler           ; EXTI Line 2
+                DCD     EXTI3_IRQHandler           ; EXTI Line 3
+                DCD     EXTI4_IRQHandler           ; EXTI Line 4
+                DCD     DMA1_Channel1_IRQHandler   ; DMA1 Channel 1
+                DCD     DMA1_Channel2_IRQHandler   ; DMA1 Channel 2
+                DCD     DMA1_Channel3_IRQHandler   ; DMA1 Channel 3
+                DCD     DMA1_Channel4_IRQHandler   ; DMA1 Channel 4
+                DCD     DMA1_Channel5_IRQHandler   ; DMA1 Channel 5
+                DCD     DMA1_Channel6_IRQHandler   ; DMA1 Channel 6
+                DCD     DMA1_Channel7_IRQHandler   ; DMA1 Channel 7
+                DCD     ADC1_IRQHandler            ; ADC1
+                DCD     0                          ; Reserved
+                DCD     0                          ; Reserved
+                DCD     0                          ; Reserved
+                DCD     0                          ; Reserved
+                DCD     EXTI9_5_IRQHandler         ; EXTI Line 9..5
+                DCD     0                          ; Reserved
+                DCD     0                          ; Reserved
+                DCD     0                          ; Reserved
+                DCD     0                          ; Reserved
+                DCD     TIM2_IRQHandler            ; TIM2
+                DCD     TIM3_IRQHandler            ; TIM3
+                DCD     TIM4_IRQHandler            ; TIM4
+                DCD     I2C1_EV_IRQHandler         ; I2C1 Event
+                DCD     I2C1_ER_IRQHandler         ; I2C1 Error
+                DCD     I2C2_EV_IRQHandler         ; I2C2 Event
+                DCD     I2C2_ER_IRQHandler         ; I2C2 Error
+                DCD     SPI1_IRQHandler            ; SPI1
+                DCD     SPI2_IRQHandler            ; SPI2
+                DCD     USART1_IRQHandler          ; USART1
+                DCD     USART2_IRQHandler          ; USART2
+                DCD     USART3_IRQHandler          ; USART3
+                DCD     EXTI15_10_IRQHandler       ; EXTI Line 15..10
+                DCD     RTC_Alarm_IRQHandler        ; RTC Alarm through EXTI Line
+                DCD     0                          ; Reserved
+                DCD     0                          ; Reserved
+                DCD     0                          ; Reserved
+                DCD     0                          ; Reserved
+                DCD     0                          ; Reserved
+                DCD     0                          ; Reserved
+                DCD     FSMC_IRQHandler            ; FSMC
+                DCD     0                          ; Reserved
+                DCD     TIM5_IRQHandler            ; TIM5
+                DCD     SPI3_IRQHandler            ; SPI3
+                DCD     UART4_IRQHandler           ; UART4
+                DCD     UART5_IRQHandler           ; UART5
+                DCD     TIM6_IRQHandler            ; TIM6
+                DCD     TIM7_IRQHandler            ; TIM7
+                DCD     DMA2_Channel1_IRQHandler   ; DMA2 Channel1
+                DCD     DMA2_Channel2_IRQHandler   ; DMA2 Channel2
+                DCD     DMA2_Channel3_IRQHandler   ; DMA2 Channel3
+                DCD     DMA2_Channel4_5_IRQHandler ; DMA2 Channel4 & Channel5
+__Vectors_End
+
+__Vectors_Size  EQU  __Vectors_End - __Vectors
+
+                AREA    |.text|, CODE, READONLY
+                
+; Reset handler
+Reset_Handler   PROC
+                EXPORT  Reset_Handler             [WEAK]
+                IMPORT  __main
+                IMPORT  SystemInit
+                LDR     R0, =SystemInit
+                BLX     R0               
+                LDR     R0, =__main
+                BX      R0
+                ENDP
+                
+; Dummy Exception Handlers (infinite loops which can be modified)
+
+NMI_Handler     PROC
+                EXPORT  NMI_Handler                [WEAK]
+                B       .
+                ENDP
+HardFault_Handler\
+                PROC
+                EXPORT  HardFault_Handler          [WEAK]
+                B       .
+                ENDP
+MemManage_Handler\
+                PROC
+                EXPORT  MemManage_Handler          [WEAK]
+                B       .
+                ENDP
+BusFault_Handler\
+                PROC
+                EXPORT  BusFault_Handler           [WEAK]
+                B       .
+                ENDP
+UsageFault_Handler\
+                PROC
+                EXPORT  UsageFault_Handler         [WEAK]
+                B       .
+                ENDP
+SVC_Handler     PROC
+                EXPORT  SVC_Handler                [WEAK]
+                B       .
+                ENDP
+DebugMon_Handler\
+                PROC
+                EXPORT  DebugMon_Handler           [WEAK]
+                B       .
+                ENDP
+PendSV_Handler  PROC
+                EXPORT  PendSV_Handler             [WEAK]
+                B       .
+                ENDP
+SysTick_Handler PROC
+                EXPORT  SysTick_Handler            [WEAK]
+                B       .
+                ENDP
+
+Default_Handler PROC
+
+                EXPORT  WWDG_IRQHandler            [WEAK]
+                EXPORT  PVD_IRQHandler             [WEAK]
+                EXPORT  TAMPER_IRQHandler          [WEAK]
+                EXPORT  RTC_IRQHandler             [WEAK]
+                EXPORT  FLASH_IRQHandler           [WEAK]
+                EXPORT  RCC_IRQHandler             [WEAK]
+                EXPORT  EXTI0_IRQHandler           [WEAK]
+                EXPORT  EXTI1_IRQHandler           [WEAK]
+                EXPORT  EXTI2_IRQHandler           [WEAK]
+                EXPORT  EXTI3_IRQHandler           [WEAK]
+                EXPORT  EXTI4_IRQHandler           [WEAK]
+                EXPORT  DMA1_Channel1_IRQHandler   [WEAK]
+                EXPORT  DMA1_Channel2_IRQHandler   [WEAK]
+                EXPORT  DMA1_Channel3_IRQHandler   [WEAK]
+                EXPORT  DMA1_Channel4_IRQHandler   [WEAK]
+                EXPORT  DMA1_Channel5_IRQHandler   [WEAK]
+                EXPORT  DMA1_Channel6_IRQHandler   [WEAK]
+                EXPORT  DMA1_Channel7_IRQHandler   [WEAK]
+                EXPORT  ADC1_IRQHandler            [WEAK]
+                EXPORT  EXTI9_5_IRQHandler         [WEAK]
+                EXPORT  TIM2_IRQHandler            [WEAK]
+                EXPORT  TIM3_IRQHandler            [WEAK]
+                EXPORT  TIM4_IRQHandler            [WEAK]
+                EXPORT  I2C1_EV_IRQHandler         [WEAK]
+                EXPORT  I2C1_ER_IRQHandler         [WEAK]
+                EXPORT  I2C2_EV_IRQHandler         [WEAK]
+                EXPORT  I2C2_ER_IRQHandler         [WEAK]
+                EXPORT  SPI1_IRQHandler            [WEAK]
+                EXPORT  SPI2_IRQHandler            [WEAK]
+                EXPORT  USART1_IRQHandler          [WEAK]
+                EXPORT  USART2_IRQHandler          [WEAK]
+                EXPORT  USART3_IRQHandler          [WEAK]
+                EXPORT  EXTI15_10_IRQHandler       [WEAK]
+                EXPORT  RTC_Alarm_IRQHandler       [WEAK]
+                EXPORT  FSMC_IRQHandler            [WEAK]
+                EXPORT  TIM5_IRQHandler            [WEAK]
+                EXPORT  SPI3_IRQHandler            [WEAK]
+                EXPORT  UART4_IRQHandler           [WEAK]
+                EXPORT  UART5_IRQHandler           [WEAK]
+                EXPORT  TIM6_IRQHandler            [WEAK]
+                EXPORT  TIM7_IRQHandler            [WEAK]
+                EXPORT  DMA2_Channel1_IRQHandler   [WEAK]
+                EXPORT  DMA2_Channel2_IRQHandler   [WEAK]
+                EXPORT  DMA2_Channel3_IRQHandler   [WEAK]
+                EXPORT  DMA2_Channel4_5_IRQHandler [WEAK]
+
+WWDG_IRQHandler
+PVD_IRQHandler
+TAMPER_IRQHandler
+RTC_IRQHandler
+FLASH_IRQHandler
+RCC_IRQHandler
+EXTI0_IRQHandler
+EXTI1_IRQHandler
+EXTI2_IRQHandler
+EXTI3_IRQHandler
+EXTI4_IRQHandler
+DMA1_Channel1_IRQHandler
+DMA1_Channel2_IRQHandler
+DMA1_Channel3_IRQHandler
+DMA1_Channel4_IRQHandler
+DMA1_Channel5_IRQHandler
+DMA1_Channel6_IRQHandler
+DMA1_Channel7_IRQHandler
+ADC1_IRQHandler
+EXTI9_5_IRQHandler
+TIM2_IRQHandler
+TIM3_IRQHandler
+TIM4_IRQHandler
+I2C1_EV_IRQHandler
+I2C1_ER_IRQHandler
+I2C2_EV_IRQHandler
+I2C2_ER_IRQHandler
+SPI1_IRQHandler
+SPI2_IRQHandler
+USART1_IRQHandler
+USART2_IRQHandler
+USART3_IRQHandler
+EXTI15_10_IRQHandler
+RTC_Alarm_IRQHandler
+FSMC_IRQHandler
+TIM5_IRQHandler
+SPI3_IRQHandler
+UART4_IRQHandler
+UART5_IRQHandler
+TIM6_IRQHandler
+TIM7_IRQHandler
+DMA2_Channel1_IRQHandler
+DMA2_Channel2_IRQHandler
+DMA2_Channel3_IRQHandler
+DMA2_Channel4_5_IRQHandler
+                B       .
+
+                ENDP
+
+                ALIGN
+
+;*******************************************************************************
+; User Stack and Heap initialization
+;*******************************************************************************
+                 IF      :DEF:__MICROLIB
+                
+                 EXPORT  __initial_sp
+                 EXPORT  __heap_base
+                 EXPORT  __heap_limit
+                
+                 ELSE
+                
+                 IMPORT  __use_two_region_memory
+                 EXPORT  __user_initial_stackheap
+                 
+__user_initial_stackheap
+
+                 LDR     R0, =  Heap_Mem
+                 LDR     R1, =(Stack_Mem + Stack_Size)
+                 LDR     R2, = (Heap_Mem +  Heap_Size)
+                 LDR     R3, = Stack_Mem
+                 BX      LR
+
+                 ALIGN
+
+                 ENDIF
+
+                 END
+
+;************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE*****

bsp/stm32f10x_HAL/Libraries/CMSIS/Device/ST/STM32F1xx/Source/Templates/arm/startup_stm32f101xg.s

@@ -0,0 +1,355 @@
+;******************** (C) COPYRIGHT 2017 STMicroelectronics ********************
+;* File Name          : startup_stm32f101xg.s
+;* Author             : MCD Application Team
+;* Version            : V4.2.0
+;* Date               : 31-March-2017
+;* Description        : STM32F101xG Devices vector table for MDK-ARM toolchain. 
+;*                      This module performs:
+;*                      - Set the initial SP
+;*                      - Set the initial PC == Reset_Handler
+;*                      - Set the vector table entries with the exceptions ISR address
+;*                      - Configure the clock system
+;*                      - Branches to __main in the C library (which eventually
+;*                        calls main()).
+;*                      After Reset the Cortex-M3 processor is in Thread mode,
+;*                      priority is Privileged, and the Stack is set to Main.
+;********************************************************************************
+;*
+;* <h2><center>&copy; COPYRIGHT(c) 2017 STMicroelectronics</center></h2>
+;*
+;* Redistribution and use in source and binary forms, with or without modification,
+;* are permitted provided that the following conditions are met:
+;*   1. Redistributions of source code must retain the above copyright notice,
+;*      this list of conditions and the following disclaimer.
+;*   2. Redistributions in binary form must reproduce the above copyright notice,
+;*      this list of conditions and the following disclaimer in the documentation
+;*      and/or other materials provided with the distribution.
+;*   3. Neither the name of STMicroelectronics nor the names of its contributors
+;*      may be used to endorse or promote products derived from this software
+;*      without specific prior written permission.
+;*
+;* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+;* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+;* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+;* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+;* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+;* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+;* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+;* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+;* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+;* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+; 
+;*******************************************************************************
+
+; Amount of memory (in bytes) allocated for Stack
+; Tailor this value to your application needs
+; <h> Stack Configuration
+;   <o> Stack Size (in Bytes) <0x0-0xFFFFFFFF:8>
+; </h>
+
+Stack_Size      EQU     0x00000400
+
+                AREA    STACK, NOINIT, READWRITE, ALIGN=3
+Stack_Mem       SPACE   Stack_Size
+__initial_sp
+                                                  
+; <h> Heap Configuration
+;   <o>  Heap Size (in Bytes) <0x0-0xFFFFFFFF:8>
+; </h>
+
+Heap_Size       EQU     0x00000200
+
+                AREA    HEAP, NOINIT, READWRITE, ALIGN=3
+__heap_base
+Heap_Mem        SPACE   Heap_Size
+__heap_limit
+
+                PRESERVE8
+                THUMB
+
+
+; Vector Table Mapped to Address 0 at Reset
+                AREA    RESET, DATA, READONLY
+                EXPORT  __Vectors
+                EXPORT  __Vectors_End
+                EXPORT  __Vectors_Size
+
+__Vectors       DCD     __initial_sp               ; Top of Stack
+                DCD     Reset_Handler              ; Reset Handler
+                DCD     NMI_Handler                ; NMI Handler
+                DCD     HardFault_Handler          ; Hard Fault Handler
+                DCD     MemManage_Handler          ; MPU Fault Handler
+                DCD     BusFault_Handler           ; Bus Fault Handler
+                DCD     UsageFault_Handler         ; Usage Fault Handler
+                DCD     0                          ; Reserved
+                DCD     0                          ; Reserved
+                DCD     0                          ; Reserved
+                DCD     0                          ; Reserved
+                DCD     SVC_Handler                ; SVCall Handler
+                DCD     DebugMon_Handler           ; Debug Monitor Handler
+                DCD     0                          ; Reserved
+                DCD     PendSV_Handler             ; PendSV Handler
+                DCD     SysTick_Handler            ; SysTick Handler
+
+                ; External Interrupts
+                DCD     WWDG_IRQHandler               ; Window Watchdog
+                DCD     PVD_IRQHandler                ; PVD through EXTI Line detect
+                DCD     TAMPER_IRQHandler             ; Tamper
+                DCD     RTC_IRQHandler                ; RTC
+                DCD     FLASH_IRQHandler              ; Flash
+                DCD     RCC_IRQHandler                ; RCC
+                DCD     EXTI0_IRQHandler              ; EXTI Line 0
+                DCD     EXTI1_IRQHandler              ; EXTI Line 1
+                DCD     EXTI2_IRQHandler              ; EXTI Line 2
+                DCD     EXTI3_IRQHandler              ; EXTI Line 3
+                DCD     EXTI4_IRQHandler              ; EXTI Line 4
+                DCD     DMA1_Channel1_IRQHandler      ; DMA1 Channel 1
+                DCD     DMA1_Channel2_IRQHandler      ; DMA1 Channel 2
+                DCD     DMA1_Channel3_IRQHandler      ; DMA1 Channel 3
+                DCD     DMA1_Channel4_IRQHandler      ; DMA1 Channel 4
+                DCD     DMA1_Channel5_IRQHandler      ; DMA1 Channel 5
+                DCD     DMA1_Channel6_IRQHandler      ; DMA1 Channel 6
+                DCD     DMA1_Channel7_IRQHandler      ; DMA1 Channel 7
+                DCD     ADC1_2_IRQHandler             ; ADC1_2
+                DCD     0                          ; Reserved
+                DCD     0                          ; Reserved
+                DCD     0                          ; Reserved
+                DCD     0                          ; Reserved
+                DCD     EXTI9_5_IRQHandler            ; EXTI Line 9..5
+                DCD     TIM9_IRQHandler               ; TIM9
+                DCD     TIM10_IRQHandler              ; TIM10
+                DCD     TIM11_IRQHandler              ; TIM11
+                DCD     0                          ; Reserved
+                DCD     TIM2_IRQHandler               ; TIM2
+                DCD     TIM3_IRQHandler               ; TIM3
+                DCD     TIM4_IRQHandler               ; TIM4
+                DCD     I2C1_EV_IRQHandler            ; I2C1 Event
+                DCD     I2C1_ER_IRQHandler            ; I2C1 Error
+                DCD     I2C2_EV_IRQHandler            ; I2C2 Event
+                DCD     I2C2_ER_IRQHandler            ; I2C2 Error
+                DCD     SPI1_IRQHandler               ; SPI1
+                DCD     SPI2_IRQHandler               ; SPI2
+                DCD     USART1_IRQHandler             ; USART1
+                DCD     USART2_IRQHandler             ; USART2
+                DCD     USART3_IRQHandler             ; USART3
+                DCD     EXTI15_10_IRQHandler          ; EXTI Line 15..10
+                DCD     RTC_Alarm_IRQHandler           ; RTC Alarm through EXTI Line
+                DCD     0                          ; Reserved
+                DCD     TIM12_IRQHandler                ; TIM12
+                DCD     TIM13_IRQHandler                ; TIM13 
+                DCD     TIM14_IRQHandler                ; TIM14
+                DCD     0                          ; Reserved
+                DCD     0                          ; Reserved
+                DCD     FSMC_IRQHandler               ; FSMC
+                DCD     0                          ; Reserved
+                DCD     TIM5_IRQHandler               ; TIM5
+                DCD     SPI3_IRQHandler               ; SPI3
+                DCD     UART4_IRQHandler              ; UART4
+                DCD     UART5_IRQHandler              ; UART5
+                DCD     TIM6_IRQHandler               ; TIM6
+                DCD     TIM7_IRQHandler               ; TIM7
+                DCD     DMA2_Channel1_IRQHandler      ; DMA2 Channel1
+                DCD     DMA2_Channel2_IRQHandler      ; DMA2 Channel2
+                DCD     DMA2_Channel3_IRQHandler      ; DMA2 Channel3
+                DCD     DMA2_Channel4_5_IRQHandler    ; DMA2 Channel4 & Channel5
+__Vectors_End
+
+__Vectors_Size  EQU  __Vectors_End - __Vectors
+
+                AREA    |.text|, CODE, READONLY
+                
+; Reset handler
+Reset_Handler   PROC
+                EXPORT  Reset_Handler             [WEAK]
+                IMPORT  __main
+                IMPORT  SystemInit
+                LDR     R0, =SystemInit
+                BLX     R0               
+                LDR     R0, =__main
+                BX      R0
+                ENDP
+                
+; Dummy Exception Handlers (infinite loops which can be modified)
+
+NMI_Handler     PROC
+                EXPORT  NMI_Handler                [WEAK]
+                B       .
+                ENDP
+HardFault_Handler\
+                PROC
+                EXPORT  HardFault_Handler          [WEAK]
+                B       .
+                ENDP
+MemManage_Handler\
+                PROC
+                EXPORT  MemManage_Handler          [WEAK]
+                B       .
+                ENDP
+BusFault_Handler\
+                PROC
+                EXPORT  BusFault_Handler           [WEAK]
+                B       .
+                ENDP
+UsageFault_Handler\
+                PROC
+                EXPORT  UsageFault_Handler         [WEAK]
+                B       .
+                ENDP
+SVC_Handler     PROC
+                EXPORT  SVC_Handler                [WEAK]
+                B       .
+                ENDP
+DebugMon_Handler\
+                PROC
+                EXPORT  DebugMon_Handler           [WEAK]
+                B       .
+                ENDP
+PendSV_Handler  PROC
+                EXPORT  PendSV_Handler             [WEAK]
+                B       .
+                ENDP
+SysTick_Handler PROC
+                EXPORT  SysTick_Handler            [WEAK]
+                B       .
+                ENDP
+
+Default_Handler PROC
+
+                EXPORT  WWDG_IRQHandler               [WEAK]
+                EXPORT  PVD_IRQHandler                [WEAK]
+                EXPORT  TAMPER_IRQHandler             [WEAK]
+                EXPORT  RTC_IRQHandler                [WEAK]
+                EXPORT  FLASH_IRQHandler              [WEAK]
+                EXPORT  RCC_IRQHandler                [WEAK]
+                EXPORT  EXTI0_IRQHandler              [WEAK]
+                EXPORT  EXTI1_IRQHandler              [WEAK]
+                EXPORT  EXTI2_IRQHandler              [WEAK]
+                EXPORT  EXTI3_IRQHandler              [WEAK]
+                EXPORT  EXTI4_IRQHandler              [WEAK]
+                EXPORT  DMA1_Channel1_IRQHandler      [WEAK]
+                EXPORT  DMA1_Channel2_IRQHandler      [WEAK]
+                EXPORT  DMA1_Channel3_IRQHandler      [WEAK]
+                EXPORT  DMA1_Channel4_IRQHandler      [WEAK]
+                EXPORT  DMA1_Channel5_IRQHandler      [WEAK]
+                EXPORT  DMA1_Channel6_IRQHandler      [WEAK]
+                EXPORT  DMA1_Channel7_IRQHandler      [WEAK]
+                EXPORT  ADC1_2_IRQHandler             [WEAK]
+                EXPORT  EXTI9_5_IRQHandler            [WEAK]
+                EXPORT  TIM9_IRQHandler               [WEAK]
+                EXPORT  TIM10_IRQHandler              [WEAK]
+                EXPORT  TIM11_IRQHandler              [WEAK]
+                EXPORT  TIM2_IRQHandler               [WEAK]
+                EXPORT  TIM3_IRQHandler               [WEAK]
+                EXPORT  TIM4_IRQHandler               [WEAK]
+                EXPORT  I2C1_EV_IRQHandler            [WEAK]
+                EXPORT  I2C1_ER_IRQHandler            [WEAK]
+                EXPORT  I2C2_EV_IRQHandler            [WEAK]
+                EXPORT  I2C2_ER_IRQHandler            [WEAK]
+                EXPORT  SPI1_IRQHandler               [WEAK]
+                EXPORT  SPI2_IRQHandler               [WEAK]
+                EXPORT  USART1_IRQHandler             [WEAK]
+                EXPORT  USART2_IRQHandler             [WEAK]
+                EXPORT  USART3_IRQHandler             [WEAK]
+                EXPORT  EXTI15_10_IRQHandler          [WEAK]
+                EXPORT  RTC_Alarm_IRQHandler          [WEAK]
+                EXPORT  TIM12_IRQHandler              [WEAK]
+                EXPORT  TIM13_IRQHandler              [WEAK]
+                EXPORT  TIM14_IRQHandler              [WEAK]
+                EXPORT  FSMC_IRQHandler               [WEAK]
+                EXPORT  TIM5_IRQHandler               [WEAK]
+                EXPORT  SPI3_IRQHandler               [WEAK]
+                EXPORT  UART4_IRQHandler              [WEAK]
+                EXPORT  UART5_IRQHandler              [WEAK]
+                EXPORT  TIM6_IRQHandler               [WEAK]
+                EXPORT  TIM7_IRQHandler               [WEAK]
+                EXPORT  DMA2_Channel1_IRQHandler      [WEAK]
+                EXPORT  DMA2_Channel2_IRQHandler      [WEAK]
+                EXPORT  DMA2_Channel3_IRQHandler      [WEAK]
+                EXPORT  DMA2_Channel4_5_IRQHandler    [WEAK]
+
+WWDG_IRQHandler
+PVD_IRQHandler
+TAMPER_IRQHandler
+RTC_IRQHandler
+FLASH_IRQHandler
+RCC_IRQHandler
+EXTI0_IRQHandler
+EXTI1_IRQHandler
+EXTI2_IRQHandler
+EXTI3_IRQHandler
+EXTI4_IRQHandler
+DMA1_Channel1_IRQHandler
+DMA1_Channel2_IRQHandler
+DMA1_Channel3_IRQHandler
+DMA1_Channel4_IRQHandler
+DMA1_Channel5_IRQHandler
+DMA1_Channel6_IRQHandler
+DMA1_Channel7_IRQHandler
+ADC1_2_IRQHandler
+EXTI9_5_IRQHandler
+TIM9_IRQHandler
+TIM10_IRQHandler
+TIM11_IRQHandler
+TIM2_IRQHandler
+TIM3_IRQHandler
+TIM4_IRQHandler
+I2C1_EV_IRQHandler
+I2C1_ER_IRQHandler
+I2C2_EV_IRQHandler
+I2C2_ER_IRQHandler
+SPI1_IRQHandler
+SPI2_IRQHandler
+USART1_IRQHandler
+USART2_IRQHandler
+USART3_IRQHandler
+EXTI15_10_IRQHandler
+RTC_Alarm_IRQHandler
+TIM12_IRQHandler
+TIM13_IRQHandler
+TIM14_IRQHandler
+FSMC_IRQHandler
+TIM5_IRQHandler
+SPI3_IRQHandler
+UART4_IRQHandler
+UART5_IRQHandler
+TIM6_IRQHandler
+TIM7_IRQHandler
+DMA2_Channel1_IRQHandler
+DMA2_Channel2_IRQHandler
+DMA2_Channel3_IRQHandler
+DMA2_Channel4_5_IRQHandler
+                B       .
+
+                ENDP
+
+                ALIGN
+
+;*******************************************************************************
+; User Stack and Heap initialization
+;*******************************************************************************
+                 IF      :DEF:__MICROLIB
+                
+                 EXPORT  __initial_sp
+                 EXPORT  __heap_base
+                 EXPORT  __heap_limit
+                
+                 ELSE
+                
+                 IMPORT  __use_two_region_memory
+                 EXPORT  __user_initial_stackheap
+                 
+__user_initial_stackheap
+
+                 LDR     R0, =  Heap_Mem
+                 LDR     R1, =(Stack_Mem + Stack_Size)
+                 LDR     R2, = (Heap_Mem +  Heap_Size)
+                 LDR     R3, = Stack_Mem
+                 BX      LR
+
+                 ALIGN
+
+                 ENDIF
+
+                 END
+
+;************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE*****

bsp/stm32f10x_HAL/Libraries/CMSIS/Device/ST/STM32F1xx/Source/Templates/arm/startup_stm32f102x6.s

@@ -0,0 +1,302 @@
+;******************** (C) COPYRIGHT 2017 STMicroelectronics ********************
+;* File Name          : startup_stm32f102x6.s
+;* Author             : MCD Application Team
+;* Version            : V4.2.0
+;* Date               : 31-March-2017
+;* Description        : STM32F102x6 Devices vector table for MDK-ARM toolchain. 
+;*                      This module performs:
+;*                      - Set the initial SP
+;*                      - Set the initial PC == Reset_Handler
+;*                      - Set the vector table entries with the exceptions ISR address
+;*                      - Configure the clock system
+;*                      - Branches to __main in the C library (which eventually
+;*                        calls main()).
+;*                      After Reset the Cortex-M3 processor is in Thread mode,
+;*                      priority is Privileged, and the Stack is set to Main.
+;********************************************************************************
+;*
+;* <h2><center>&copy; COPYRIGHT(c) 2017 STMicroelectronics</center></h2>
+;*
+;* Redistribution and use in source and binary forms, with or without modification,
+;* are permitted provided that the following conditions are met:
+;*   1. Redistributions of source code must retain the above copyright notice,
+;*      this list of conditions and the following disclaimer.
+;*   2. Redistributions in binary form must reproduce the above copyright notice,
+;*      this list of conditions and the following disclaimer in the documentation
+;*      and/or other materials provided with the distribution.
+;*   3. Neither the name of STMicroelectronics nor the names of its contributors
+;*      may be used to endorse or promote products derived from this software
+;*      without specific prior written permission.
+;*
+;* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+;* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+;* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+;* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+;* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+;* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+;* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+;* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+;* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+;* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+; 
+;*******************************************************************************
+
+; Amount of memory (in bytes) allocated for Stack
+; Tailor this value to your application needs
+; <h> Stack Configuration
+;   <o> Stack Size (in Bytes) <0x0-0xFFFFFFFF:8>
+; </h>
+
+Stack_Size      EQU     0x00000400
+
+                AREA    STACK, NOINIT, READWRITE, ALIGN=3
+Stack_Mem       SPACE   Stack_Size
+__initial_sp
+
+
+; <h> Heap Configuration
+;   <o>  Heap Size (in Bytes) <0x0-0xFFFFFFFF:8>
+; </h>
+
+Heap_Size       EQU     0x00000200
+
+                AREA    HEAP, NOINIT, READWRITE, ALIGN=3
+__heap_base
+Heap_Mem        SPACE   Heap_Size
+__heap_limit
+
+                PRESERVE8
+                THUMB
+
+
+; Vector Table Mapped to Address 0 at Reset
+                AREA    RESET, DATA, READONLY
+                EXPORT  __Vectors
+                EXPORT  __Vectors_End
+                EXPORT  __Vectors_Size
+
+__Vectors       DCD     __initial_sp               ; Top of Stack
+                DCD     Reset_Handler              ; Reset Handler
+                DCD     NMI_Handler                ; NMI Handler
+                DCD     HardFault_Handler          ; Hard Fault Handler
+                DCD     MemManage_Handler          ; MPU Fault Handler
+                DCD     BusFault_Handler           ; Bus Fault Handler
+                DCD     UsageFault_Handler         ; Usage Fault Handler
+                DCD     0                          ; Reserved
+                DCD     0                          ; Reserved
+                DCD     0                          ; Reserved
+                DCD     0                          ; Reserved
+                DCD     SVC_Handler                ; SVCall Handler
+                DCD     DebugMon_Handler           ; Debug Monitor Handler
+                DCD     0                          ; Reserved
+                DCD     PendSV_Handler             ; PendSV Handler
+                DCD     SysTick_Handler            ; SysTick Handler
+
+                ; External Interrupts
+                DCD     WWDG_IRQHandler            ; Window Watchdog
+                DCD     PVD_IRQHandler             ; PVD through EXTI Line detect
+                DCD     TAMPER_IRQHandler          ; Tamper
+                DCD     RTC_IRQHandler             ; RTC
+                DCD     FLASH_IRQHandler           ; Flash
+                DCD     RCC_IRQHandler             ; RCC
+                DCD     EXTI0_IRQHandler           ; EXTI Line 0
+                DCD     EXTI1_IRQHandler           ; EXTI Line 1
+                DCD     EXTI2_IRQHandler           ; EXTI Line 2
+                DCD     EXTI3_IRQHandler           ; EXTI Line 3
+                DCD     EXTI4_IRQHandler           ; EXTI Line 4
+                DCD     DMA1_Channel1_IRQHandler   ; DMA1 Channel 1
+                DCD     DMA1_Channel2_IRQHandler   ; DMA1 Channel 2
+                DCD     DMA1_Channel3_IRQHandler   ; DMA1 Channel 3
+                DCD     DMA1_Channel4_IRQHandler   ; DMA1 Channel 4
+                DCD     DMA1_Channel5_IRQHandler   ; DMA1 Channel 5
+                DCD     DMA1_Channel6_IRQHandler   ; DMA1 Channel 6
+                DCD     DMA1_Channel7_IRQHandler   ; DMA1 Channel 7
+                DCD     ADC1_IRQHandler            ; ADC1
+                DCD     USB_HP_IRQHandler          ; USB High Priority
+                DCD     USB_LP_IRQHandler          ; USB Low  Priority
+                DCD     0                          ; Reserved
+                DCD     0                          ; Reserved
+                DCD     EXTI9_5_IRQHandler         ; EXTI Line 9..5
+                DCD     0                          ; Reserved
+                DCD     0                          ; Reserved
+                DCD     0                          ; Reserved
+                DCD     0                          ; Reserved
+                DCD     TIM2_IRQHandler            ; TIM2
+                DCD     TIM3_IRQHandler            ; TIM3
+                DCD     0                          ; Reserved
+                DCD     I2C1_EV_IRQHandler         ; I2C1 Event
+                DCD     I2C1_ER_IRQHandler         ; I2C1 Error
+                DCD     0                          ; Reserved
+                DCD     0                          ; Reserved
+                DCD     SPI1_IRQHandler            ; SPI1
+                DCD     0                          ; Reserved
+                DCD     USART1_IRQHandler          ; USART1
+                DCD     USART2_IRQHandler          ; USART2
+                DCD     0                          ; Reserved
+                DCD     EXTI15_10_IRQHandler       ; EXTI Line 15..10
+                DCD     RTC_Alarm_IRQHandler        ; RTC Alarm through EXTI Line
+                DCD     USBWakeUp_IRQHandler       ; USB Wakeup from suspend
+__Vectors_End
+
+__Vectors_Size  EQU  __Vectors_End - __Vectors
+
+                AREA    |.text|, CODE, READONLY
+
+; Reset handler routine
+Reset_Handler    PROC
+                 EXPORT  Reset_Handler             [WEAK]
+     IMPORT  __main
+     IMPORT  SystemInit
+                 LDR     R0, =SystemInit
+                 BLX     R0
+                 LDR     R0, =__main
+                 BX      R0
+                 ENDP
+
+; Dummy Exception Handlers (infinite loops which can be modified)
+
+NMI_Handler     PROC
+                EXPORT  NMI_Handler                [WEAK]
+                B       .
+                ENDP
+HardFault_Handler\
+                PROC
+                EXPORT  HardFault_Handler          [WEAK]
+                B       .
+                ENDP
+MemManage_Handler\
+                PROC
+                EXPORT  MemManage_Handler          [WEAK]
+                B       .
+                ENDP
+BusFault_Handler\
+                PROC
+                EXPORT  BusFault_Handler           [WEAK]
+                B       .
+                ENDP
+UsageFault_Handler\
+                PROC
+                EXPORT  UsageFault_Handler         [WEAK]
+                B       .
+                ENDP
+SVC_Handler     PROC
+                EXPORT  SVC_Handler                [WEAK]
+                B       .
+                ENDP
+DebugMon_Handler\
+                PROC
+                EXPORT  DebugMon_Handler           [WEAK]
+                B       .
+                ENDP
+PendSV_Handler  PROC
+                EXPORT  PendSV_Handler             [WEAK]
+                B       .
+                ENDP
+SysTick_Handler PROC
+                EXPORT  SysTick_Handler            [WEAK]
+                B       .
+                ENDP
+
+Default_Handler PROC
+
+                EXPORT  WWDG_IRQHandler            [WEAK]
+                EXPORT  PVD_IRQHandler             [WEAK]
+                EXPORT  TAMPER_IRQHandler          [WEAK]
+                EXPORT  RTC_IRQHandler             [WEAK]
+                EXPORT  FLASH_IRQHandler           [WEAK]
+                EXPORT  RCC_IRQHandler             [WEAK]
+                EXPORT  EXTI0_IRQHandler           [WEAK]
+                EXPORT  EXTI1_IRQHandler           [WEAK]
+                EXPORT  EXTI2_IRQHandler           [WEAK]
+                EXPORT  EXTI3_IRQHandler           [WEAK]
+                EXPORT  EXTI4_IRQHandler           [WEAK]
+                EXPORT  DMA1_Channel1_IRQHandler   [WEAK]
+                EXPORT  DMA1_Channel2_IRQHandler   [WEAK]
+                EXPORT  DMA1_Channel3_IRQHandler   [WEAK]
+                EXPORT  DMA1_Channel4_IRQHandler   [WEAK]
+                EXPORT  DMA1_Channel5_IRQHandler   [WEAK]
+                EXPORT  DMA1_Channel6_IRQHandler   [WEAK]
+                EXPORT  DMA1_Channel7_IRQHandler   [WEAK]
+                EXPORT  ADC1_IRQHandler            [WEAK]
+                EXPORT  USB_HP_IRQHandler          [WEAK]
+                EXPORT  USB_LP_IRQHandler          [WEAK]
+                EXPORT  EXTI9_5_IRQHandler         [WEAK]
+                EXPORT  TIM2_IRQHandler            [WEAK]
+                EXPORT  TIM3_IRQHandler            [WEAK]
+                EXPORT  I2C1_EV_IRQHandler         [WEAK]
+                EXPORT  I2C1_ER_IRQHandler         [WEAK]
+                EXPORT  SPI1_IRQHandler            [WEAK]
+                EXPORT  USART1_IRQHandler          [WEAK]
+                EXPORT  USART2_IRQHandler          [WEAK]
+                EXPORT  EXTI15_10_IRQHandler       [WEAK]
+                EXPORT  RTC_Alarm_IRQHandler        [WEAK]
+                EXPORT  USBWakeUp_IRQHandler       [WEAK]
+
+WWDG_IRQHandler
+PVD_IRQHandler
+TAMPER_IRQHandler
+RTC_IRQHandler
+FLASH_IRQHandler
+RCC_IRQHandler
+EXTI0_IRQHandler
+EXTI1_IRQHandler
+EXTI2_IRQHandler
+EXTI3_IRQHandler
+EXTI4_IRQHandler
+DMA1_Channel1_IRQHandler
+DMA1_Channel2_IRQHandler
+DMA1_Channel3_IRQHandler
+DMA1_Channel4_IRQHandler
+DMA1_Channel5_IRQHandler
+DMA1_Channel6_IRQHandler
+DMA1_Channel7_IRQHandler
+ADC1_IRQHandler
+USB_HP_IRQHandler
+USB_LP_IRQHandler
+EXTI9_5_IRQHandler
+TIM2_IRQHandler
+TIM3_IRQHandler
+I2C1_EV_IRQHandler
+I2C1_ER_IRQHandler
+SPI1_IRQHandler
+USART1_IRQHandler
+USART2_IRQHandler
+EXTI15_10_IRQHandler
+RTC_Alarm_IRQHandler
+USBWakeUp_IRQHandler
+
+                B       .
+
+                ENDP
+
+                ALIGN
+
+;*******************************************************************************
+; User Stack and Heap initialization
+;*******************************************************************************
+                 IF      :DEF:__MICROLIB
+                
+                 EXPORT  __initial_sp
+                 EXPORT  __heap_base
+                 EXPORT  __heap_limit
+                
+                 ELSE
+                
+                 IMPORT  __use_two_region_memory
+                 EXPORT  __user_initial_stackheap
+                 
+__user_initial_stackheap
+
+                 LDR     R0, =  Heap_Mem
+                 LDR     R1, =(Stack_Mem + Stack_Size)
+                 LDR     R2, = (Heap_Mem +  Heap_Size)
+                 LDR     R3, = Stack_Mem
+                 BX      LR
+
+                 ALIGN
+
+                 ENDIF
+
+                 END
+
+;************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE*****

bsp/stm32f10x_HAL/Libraries/CMSIS/Device/ST/STM32F1xx/Source/Templates/arm/startup_stm32f102xb.s

@@ -0,0 +1,312 @@
+;******************** (C) COPYRIGHT 2017 STMicroelectronics ********************
+;* File Name          : startup_stm32f102xb.s
+;* Author             : MCD Application Team
+;* Version            : V4.2.0
+;* Date               : 31-March-2017
+;* Description        : STM32F102xB Devices vector table for MDK-ARM toolchain. 
+;*                      This module performs:
+;*                      - Set the initial SP
+;*                      - Set the initial PC == Reset_Handler
+;*                      - Set the vector table entries with the exceptions ISR address
+;*                      - Configure the clock system
+;*                      - Branches to __main in the C library (which eventually
+;*                        calls main()).
+;*                      After Reset the Cortex-M3 processor is in Thread mode,
+;*                      priority is Privileged, and the Stack is set to Main.
+;********************************************************************************
+;*
+;* <h2><center>&copy; COPYRIGHT(c) 2017 STMicroelectronics</center></h2>
+;*
+;* Redistribution and use in source and binary forms, with or without modification,
+;* are permitted provided that the following conditions are met:
+;*   1. Redistributions of source code must retain the above copyright notice,
+;*      this list of conditions and the following disclaimer.
+;*   2. Redistributions in binary form must reproduce the above copyright notice,
+;*      this list of conditions and the following disclaimer in the documentation
+;*      and/or other materials provided with the distribution.
+;*   3. Neither the name of STMicroelectronics nor the names of its contributors
+;*      may be used to endorse or promote products derived from this software
+;*      without specific prior written permission.
+;*
+;* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+;* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+;* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+;* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+;* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+;* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+;* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+;* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+;* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+;* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+; 
+;*******************************************************************************
+
+; Amount of memory (in bytes) allocated for Stack
+; Tailor this value to your application needs
+; <h> Stack Configuration
+;   <o> Stack Size (in Bytes) <0x0-0xFFFFFFFF:8>
+; </h>
+
+Stack_Size      EQU     0x00000400
+
+                AREA    STACK, NOINIT, READWRITE, ALIGN=3
+Stack_Mem       SPACE   Stack_Size
+__initial_sp
+
+
+; <h> Heap Configuration
+;   <o>  Heap Size (in Bytes) <0x0-0xFFFFFFFF:8>
+; </h>
+
+Heap_Size       EQU     0x00000200
+
+                AREA    HEAP, NOINIT, READWRITE, ALIGN=3
+__heap_base
+Heap_Mem        SPACE   Heap_Size
+__heap_limit
+
+                PRESERVE8
+                THUMB
+
+
+; Vector Table Mapped to Address 0 at Reset
+                AREA    RESET, DATA, READONLY
+                EXPORT  __Vectors
+                EXPORT  __Vectors_End
+                EXPORT  __Vectors_Size
+
+__Vectors       DCD     __initial_sp               ; Top of Stack
+                DCD     Reset_Handler              ; Reset Handler
+                DCD     NMI_Handler                ; NMI Handler
+                DCD     HardFault_Handler          ; Hard Fault Handler
+                DCD     MemManage_Handler          ; MPU Fault Handler
+                DCD     BusFault_Handler           ; Bus Fault Handler
+                DCD     UsageFault_Handler         ; Usage Fault Handler
+                DCD     0                          ; Reserved
+                DCD     0                          ; Reserved
+                DCD     0                          ; Reserved
+                DCD     0                          ; Reserved
+                DCD     SVC_Handler                ; SVCall Handler
+                DCD     DebugMon_Handler           ; Debug Monitor Handler
+                DCD     0                          ; Reserved
+                DCD     PendSV_Handler             ; PendSV Handler
+                DCD     SysTick_Handler            ; SysTick Handler
+
+                ; External Interrupts
+                DCD     WWDG_IRQHandler            ; Window Watchdog
+                DCD     PVD_IRQHandler             ; PVD through EXTI Line detect
+                DCD     TAMPER_IRQHandler          ; Tamper
+                DCD     RTC_IRQHandler             ; RTC
+                DCD     FLASH_IRQHandler           ; Flash
+                DCD     RCC_IRQHandler             ; RCC
+                DCD     EXTI0_IRQHandler           ; EXTI Line 0
+                DCD     EXTI1_IRQHandler           ; EXTI Line 1
+                DCD     EXTI2_IRQHandler           ; EXTI Line 2
+                DCD     EXTI3_IRQHandler           ; EXTI Line 3
+                DCD     EXTI4_IRQHandler           ; EXTI Line 4
+                DCD     DMA1_Channel1_IRQHandler   ; DMA1 Channel 1
+                DCD     DMA1_Channel2_IRQHandler   ; DMA1 Channel 2
+                DCD     DMA1_Channel3_IRQHandler   ; DMA1 Channel 3
+                DCD     DMA1_Channel4_IRQHandler   ; DMA1 Channel 4
+                DCD     DMA1_Channel5_IRQHandler   ; DMA1 Channel 5
+                DCD     DMA1_Channel6_IRQHandler   ; DMA1 Channel 6
+                DCD     DMA1_Channel7_IRQHandler   ; DMA1 Channel 7
+                DCD     ADC1_IRQHandler            ; ADC1
+                DCD     USB_HP_IRQHandler          ; USB High Priority
+                DCD     USB_LP_IRQHandler          ; USB Low  Priority
+                DCD     0                          ; Reserved
+                DCD     0                          ; Reserved
+                DCD     EXTI9_5_IRQHandler         ; EXTI Line 9..5
+                DCD     0                          ; Reserved
+                DCD     0                          ; Reserved
+                DCD     0                          ; Reserved
+                DCD     0                          ; Reserved
+                DCD     TIM2_IRQHandler            ; TIM2
+                DCD     TIM3_IRQHandler            ; TIM3
+                DCD     TIM4_IRQHandler            ; TIM4
+                DCD     I2C1_EV_IRQHandler         ; I2C1 Event
+                DCD     I2C1_ER_IRQHandler         ; I2C1 Error
+                DCD     I2C2_EV_IRQHandler         ; I2C2 Event
+                DCD     I2C2_ER_IRQHandler         ; I2C2 Error
+                DCD     SPI1_IRQHandler            ; SPI1
+                DCD     SPI2_IRQHandler            ; SPI2
+                DCD     USART1_IRQHandler          ; USART1
+                DCD     USART2_IRQHandler          ; USART2
+                DCD     USART3_IRQHandler          ; USART3
+                DCD     EXTI15_10_IRQHandler       ; EXTI Line 15..10
+                DCD     RTC_Alarm_IRQHandler        ; RTC Alarm through EXTI Line
+                DCD     USBWakeUp_IRQHandler       ; USB Wakeup from suspend
+__Vectors_End
+
+__Vectors_Size  EQU  __Vectors_End - __Vectors
+
+                AREA    |.text|, CODE, READONLY
+
+; Reset handler
+Reset_Handler    PROC
+                 EXPORT  Reset_Handler             [WEAK]
+     IMPORT  __main
+     IMPORT  SystemInit
+                 LDR     R0, =SystemInit
+                 BLX     R0
+                 LDR     R0, =__main
+                 BX      R0
+                 ENDP
+
+; Dummy Exception Handlers (infinite loops which can be modified)
+
+NMI_Handler     PROC
+                EXPORT  NMI_Handler                [WEAK]
+                B       .
+                ENDP
+HardFault_Handler\
+                PROC
+                EXPORT  HardFault_Handler          [WEAK]
+                B       .
+                ENDP
+MemManage_Handler\
+                PROC
+                EXPORT  MemManage_Handler          [WEAK]
+                B       .
+                ENDP
+BusFault_Handler\
+                PROC
+                EXPORT  BusFault_Handler           [WEAK]
+                B       .
+                ENDP
+UsageFault_Handler\
+                PROC
+                EXPORT  UsageFault_Handler         [WEAK]
+                B       .
+                ENDP
+SVC_Handler     PROC
+                EXPORT  SVC_Handler                [WEAK]
+                B       .
+                ENDP
+DebugMon_Handler\
+                PROC
+                EXPORT  DebugMon_Handler           [WEAK]
+                B       .
+                ENDP
+PendSV_Handler  PROC
+                EXPORT  PendSV_Handler             [WEAK]
+                B       .
+                ENDP
+SysTick_Handler PROC
+                EXPORT  SysTick_Handler            [WEAK]
+                B       .
+                ENDP
+
+Default_Handler PROC
+
+                EXPORT  WWDG_IRQHandler            [WEAK]
+                EXPORT  PVD_IRQHandler             [WEAK]
+                EXPORT  TAMPER_IRQHandler          [WEAK]
+                EXPORT  RTC_IRQHandler             [WEAK]
+                EXPORT  FLASH_IRQHandler           [WEAK]
+                EXPORT  RCC_IRQHandler             [WEAK]
+                EXPORT  EXTI0_IRQHandler           [WEAK]
+                EXPORT  EXTI1_IRQHandler           [WEAK]
+                EXPORT  EXTI2_IRQHandler           [WEAK]
+                EXPORT  EXTI3_IRQHandler           [WEAK]
+                EXPORT  EXTI4_IRQHandler           [WEAK]
+                EXPORT  DMA1_Channel1_IRQHandler   [WEAK]
+                EXPORT  DMA1_Channel2_IRQHandler   [WEAK]
+                EXPORT  DMA1_Channel3_IRQHandler   [WEAK]
+                EXPORT  DMA1_Channel4_IRQHandler   [WEAK]
+                EXPORT  DMA1_Channel5_IRQHandler   [WEAK]
+                EXPORT  DMA1_Channel6_IRQHandler   [WEAK]
+                EXPORT  DMA1_Channel7_IRQHandler   [WEAK]
+                EXPORT  ADC1_IRQHandler            [WEAK]
+                EXPORT  USB_HP_IRQHandler          [WEAK]
+                EXPORT  USB_LP_IRQHandler          [WEAK]
+                EXPORT  EXTI9_5_IRQHandler         [WEAK]
+                EXPORT  TIM2_IRQHandler            [WEAK]
+                EXPORT  TIM3_IRQHandler            [WEAK]
+                EXPORT  TIM4_IRQHandler            [WEAK]
+                EXPORT  I2C1_EV_IRQHandler         [WEAK]
+                EXPORT  I2C1_ER_IRQHandler         [WEAK]
+                EXPORT  I2C2_EV_IRQHandler         [WEAK]
+                EXPORT  I2C2_ER_IRQHandler         [WEAK]
+                EXPORT  SPI1_IRQHandler            [WEAK]
+                EXPORT  SPI2_IRQHandler            [WEAK]
+                EXPORT  USART1_IRQHandler          [WEAK]
+                EXPORT  USART2_IRQHandler          [WEAK]
+                EXPORT  USART3_IRQHandler          [WEAK]
+                EXPORT  EXTI15_10_IRQHandler       [WEAK]
+                EXPORT  RTC_Alarm_IRQHandler        [WEAK]
+                EXPORT  USBWakeUp_IRQHandler       [WEAK]
+
+WWDG_IRQHandler
+PVD_IRQHandler
+TAMPER_IRQHandler
+RTC_IRQHandler
+FLASH_IRQHandler
+RCC_IRQHandler
+EXTI0_IRQHandler
+EXTI1_IRQHandler
+EXTI2_IRQHandler
+EXTI3_IRQHandler
+EXTI4_IRQHandler
+DMA1_Channel1_IRQHandler
+DMA1_Channel2_IRQHandler
+DMA1_Channel3_IRQHandler
+DMA1_Channel4_IRQHandler
+DMA1_Channel5_IRQHandler
+DMA1_Channel6_IRQHandler
+DMA1_Channel7_IRQHandler
+ADC1_IRQHandler
+USB_HP_IRQHandler
+USB_LP_IRQHandler
+EXTI9_5_IRQHandler
+TIM2_IRQHandler
+TIM3_IRQHandler
+TIM4_IRQHandler
+I2C1_EV_IRQHandler
+I2C1_ER_IRQHandler
+I2C2_EV_IRQHandler
+I2C2_ER_IRQHandler
+SPI1_IRQHandler
+SPI2_IRQHandler
+USART1_IRQHandler
+USART2_IRQHandler
+USART3_IRQHandler
+EXTI15_10_IRQHandler
+RTC_Alarm_IRQHandler
+USBWakeUp_IRQHandler
+
+                B       .
+
+                ENDP
+
+                ALIGN
+
+;*******************************************************************************
+; User Stack and Heap initialization
+;*******************************************************************************
+                 IF      :DEF:__MICROLIB           
+                
+                 EXPORT  __initial_sp
+                 EXPORT  __heap_base
+                 EXPORT  __heap_limit
+                
+                 ELSE
+                
+                 IMPORT  __use_two_region_memory
+                 EXPORT  __user_initial_stackheap
+                 
+__user_initial_stackheap
+
+                 LDR     R0, =  Heap_Mem
+                 LDR     R1, =(Stack_Mem + Stack_Size)
+                 LDR     R2, = (Heap_Mem +  Heap_Size)
+                 LDR     R3, = Stack_Mem
+                 BX      LR
+
+                 ALIGN
+
+                 ENDIF
+
+                 END
+
+;************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE*****

bsp/stm32f10x_HAL/Libraries/CMSIS/Device/ST/STM32F1xx/Source/Templates/arm/startup_stm32f103x6.s

@@ -0,0 +1,314 @@
+;******************** (C) COPYRIGHT 2017 STMicroelectronics ********************
+;* File Name          : startup_stm32f103x6.s
+;* Author             : MCD Application Team
+;* Version            : V4.2.0
+;* Date               : 31-March-2017
+;* Description        : STM32F103x6 Devices vector table for MDK-ARM toolchain. 
+;*                      This module performs:
+;*                      - Set the initial SP
+;*                      - Set the initial PC == Reset_Handler
+;*                      - Set the vector table entries with the exceptions ISR address
+;*                      - Configure the clock system
+;*                      - Branches to __main in the C library (which eventually
+;*                        calls main()).
+;*                      After Reset the Cortex-M3 processor is in Thread mode,
+;*                      priority is Privileged, and the Stack is set to Main.
+;********************************************************************************
+;*
+;* <h2><center>&copy; COPYRIGHT(c) 2017 STMicroelectronics</center></h2>
+;*
+;* Redistribution and use in source and binary forms, with or without modification,
+;* are permitted provided that the following conditions are met:
+;*   1. Redistributions of source code must retain the above copyright notice,
+;*      this list of conditions and the following disclaimer.
+;*   2. Redistributions in binary form must reproduce the above copyright notice,
+;*      this list of conditions and the following disclaimer in the documentation
+;*      and/or other materials provided with the distribution.
+;*   3. Neither the name of STMicroelectronics nor the names of its contributors
+;*      may be used to endorse or promote products derived from this software
+;*      without specific prior written permission.
+;*
+;* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+;* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+;* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+;* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+;* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+;* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+;* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+;* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+;* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+;* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+; 
+;*******************************************************************************
+
+; Amount of memory (in bytes) allocated for Stack
+; Tailor this value to your application needs
+; <h> Stack Configuration
+;   <o> Stack Size (in Bytes) <0x0-0xFFFFFFFF:8>
+; </h>
+
+Stack_Size      EQU     0x00000400
+
+                AREA    STACK, NOINIT, READWRITE, ALIGN=3
+Stack_Mem       SPACE   Stack_Size
+__initial_sp
+
+
+; <h> Heap Configuration
+;   <o>  Heap Size (in Bytes) <0x0-0xFFFFFFFF:8>
+; </h>
+
+Heap_Size       EQU     0x00000200
+
+                AREA    HEAP, NOINIT, READWRITE, ALIGN=3
+__heap_base
+Heap_Mem        SPACE   Heap_Size
+__heap_limit
+
+                PRESERVE8
+                THUMB
+
+
+; Vector Table Mapped to Address 0 at Reset
+                AREA    RESET, DATA, READONLY
+                EXPORT  __Vectors
+                EXPORT  __Vectors_End
+                EXPORT  __Vectors_Size
+
+__Vectors       DCD     __initial_sp               ; Top of Stack
+                DCD     Reset_Handler              ; Reset Handler
+                DCD     NMI_Handler                ; NMI Handler
+                DCD     HardFault_Handler          ; Hard Fault Handler
+                DCD     MemManage_Handler          ; MPU Fault Handler
+                DCD     BusFault_Handler           ; Bus Fault Handler
+                DCD     UsageFault_Handler         ; Usage Fault Handler
+                DCD     0                          ; Reserved
+                DCD     0                          ; Reserved
+                DCD     0                          ; Reserved
+                DCD     0                          ; Reserved
+                DCD     SVC_Handler                ; SVCall Handler
+                DCD     DebugMon_Handler           ; Debug Monitor Handler
+                DCD     0                          ; Reserved
+                DCD     PendSV_Handler             ; PendSV Handler
+                DCD     SysTick_Handler            ; SysTick Handler
+
+                ; External Interrupts
+                DCD     WWDG_IRQHandler            ; Window Watchdog
+                DCD     PVD_IRQHandler             ; PVD through EXTI Line detect
+                DCD     TAMPER_IRQHandler          ; Tamper
+                DCD     RTC_IRQHandler             ; RTC
+                DCD     FLASH_IRQHandler           ; Flash
+                DCD     RCC_IRQHandler             ; RCC
+                DCD     EXTI0_IRQHandler           ; EXTI Line 0
+                DCD     EXTI1_IRQHandler           ; EXTI Line 1
+                DCD     EXTI2_IRQHandler           ; EXTI Line 2
+                DCD     EXTI3_IRQHandler           ; EXTI Line 3
+                DCD     EXTI4_IRQHandler           ; EXTI Line 4
+                DCD     DMA1_Channel1_IRQHandler   ; DMA1 Channel 1
+                DCD     DMA1_Channel2_IRQHandler   ; DMA1 Channel 2
+                DCD     DMA1_Channel3_IRQHandler   ; DMA1 Channel 3
+                DCD     DMA1_Channel4_IRQHandler   ; DMA1 Channel 4
+                DCD     DMA1_Channel5_IRQHandler   ; DMA1 Channel 5
+                DCD     DMA1_Channel6_IRQHandler   ; DMA1 Channel 6
+                DCD     DMA1_Channel7_IRQHandler   ; DMA1 Channel 7
+                DCD     ADC1_2_IRQHandler          ; ADC1_2
+                DCD     USB_HP_CAN1_TX_IRQHandler  ; USB High Priority or CAN1 TX
+                DCD     USB_LP_CAN1_RX0_IRQHandler ; USB Low  Priority or CAN1 RX0
+                DCD     CAN1_RX1_IRQHandler        ; CAN1 RX1
+                DCD     CAN1_SCE_IRQHandler        ; CAN1 SCE
+                DCD     EXTI9_5_IRQHandler         ; EXTI Line 9..5
+                DCD     TIM1_BRK_IRQHandler        ; TIM1 Break
+                DCD     TIM1_UP_IRQHandler         ; TIM1 Update
+                DCD     TIM1_TRG_COM_IRQHandler    ; TIM1 Trigger and Commutation
+                DCD     TIM1_CC_IRQHandler         ; TIM1 Capture Compare
+                DCD     TIM2_IRQHandler            ; TIM2
+                DCD     TIM3_IRQHandler            ; TIM3
+                DCD     0                          ; Reserved
+                DCD     I2C1_EV_IRQHandler         ; I2C1 Event
+                DCD     I2C1_ER_IRQHandler         ; I2C1 Error
+                DCD     0                          ; Reserved
+                DCD     0                          ; Reserved
+                DCD     SPI1_IRQHandler            ; SPI1
+                DCD     0                          ; Reserved
+                DCD     USART1_IRQHandler          ; USART1
+                DCD     USART2_IRQHandler          ; USART2
+                DCD     0                          ; Reserved
+                DCD     EXTI15_10_IRQHandler       ; EXTI Line 15..10
+                DCD     RTC_Alarm_IRQHandler        ; RTC Alarm through EXTI Line
+                DCD     USBWakeUp_IRQHandler       ; USB Wakeup from suspend
+__Vectors_End
+
+__Vectors_Size  EQU  __Vectors_End - __Vectors
+
+                AREA    |.text|, CODE, READONLY
+
+; Reset handler routine
+Reset_Handler    PROC
+                 EXPORT  Reset_Handler             [WEAK]
+     IMPORT  __main
+     IMPORT  SystemInit
+                 LDR     R0, =SystemInit
+                 BLX     R0
+                 LDR     R0, =__main
+                 BX      R0
+                 ENDP
+
+; Dummy Exception Handlers (infinite loops which can be modified)
+
+NMI_Handler     PROC
+                EXPORT  NMI_Handler                [WEAK]
+                B       .
+                ENDP
+HardFault_Handler\
+                PROC
+                EXPORT  HardFault_Handler          [WEAK]
+                B       .
+                ENDP
+MemManage_Handler\
+                PROC
+                EXPORT  MemManage_Handler          [WEAK]
+                B       .
+                ENDP
+BusFault_Handler\
+                PROC
+                EXPORT  BusFault_Handler           [WEAK]
+                B       .
+                ENDP
+UsageFault_Handler\
+                PROC
+                EXPORT  UsageFault_Handler         [WEAK]
+                B       .
+                ENDP
+SVC_Handler     PROC
+                EXPORT  SVC_Handler                [WEAK]
+                B       .
+                ENDP
+DebugMon_Handler\
+                PROC
+                EXPORT  DebugMon_Handler           [WEAK]
+                B       .
+                ENDP
+PendSV_Handler  PROC
+                EXPORT  PendSV_Handler             [WEAK]
+                B       .
+                ENDP
+SysTick_Handler PROC
+                EXPORT  SysTick_Handler            [WEAK]
+                B       .
+                ENDP
+
+Default_Handler PROC
+
+                EXPORT  WWDG_IRQHandler            [WEAK]
+                EXPORT  PVD_IRQHandler             [WEAK]
+                EXPORT  TAMPER_IRQHandler          [WEAK]
+                EXPORT  RTC_IRQHandler             [WEAK]
+                EXPORT  FLASH_IRQHandler           [WEAK]
+                EXPORT  RCC_IRQHandler             [WEAK]
+                EXPORT  EXTI0_IRQHandler           [WEAK]
+                EXPORT  EXTI1_IRQHandler           [WEAK]
+                EXPORT  EXTI2_IRQHandler           [WEAK]
+                EXPORT  EXTI3_IRQHandler           [WEAK]
+                EXPORT  EXTI4_IRQHandler           [WEAK]
+                EXPORT  DMA1_Channel1_IRQHandler   [WEAK]
+                EXPORT  DMA1_Channel2_IRQHandler   [WEAK]
+                EXPORT  DMA1_Channel3_IRQHandler   [WEAK]
+                EXPORT  DMA1_Channel4_IRQHandler   [WEAK]
+                EXPORT  DMA1_Channel5_IRQHandler   [WEAK]
+                EXPORT  DMA1_Channel6_IRQHandler   [WEAK]
+                EXPORT  DMA1_Channel7_IRQHandler   [WEAK]
+                EXPORT  ADC1_2_IRQHandler          [WEAK]
+                EXPORT  USB_HP_CAN1_TX_IRQHandler  [WEAK]
+                EXPORT  USB_LP_CAN1_RX0_IRQHandler [WEAK]
+                EXPORT  CAN1_RX1_IRQHandler        [WEAK]
+                EXPORT  CAN1_SCE_IRQHandler        [WEAK]
+                EXPORT  EXTI9_5_IRQHandler         [WEAK]
+                EXPORT  TIM1_BRK_IRQHandler        [WEAK]
+                EXPORT  TIM1_UP_IRQHandler         [WEAK]
+                EXPORT  TIM1_TRG_COM_IRQHandler    [WEAK]
+                EXPORT  TIM1_CC_IRQHandler         [WEAK]
+                EXPORT  TIM2_IRQHandler            [WEAK]
+                EXPORT  TIM3_IRQHandler            [WEAK]
+                EXPORT  I2C1_EV_IRQHandler         [WEAK]
+                EXPORT  I2C1_ER_IRQHandler         [WEAK]
+                EXPORT  SPI1_IRQHandler            [WEAK]
+                EXPORT  USART1_IRQHandler          [WEAK]
+                EXPORT  USART2_IRQHandler          [WEAK]
+                EXPORT  EXTI15_10_IRQHandler       [WEAK]
+                EXPORT  RTC_Alarm_IRQHandler        [WEAK]
+                EXPORT  USBWakeUp_IRQHandler       [WEAK]
+
+WWDG_IRQHandler
+PVD_IRQHandler
+TAMPER_IRQHandler
+RTC_IRQHandler
+FLASH_IRQHandler
+RCC_IRQHandler
+EXTI0_IRQHandler
+EXTI1_IRQHandler
+EXTI2_IRQHandler
+EXTI3_IRQHandler
+EXTI4_IRQHandler
+DMA1_Channel1_IRQHandler
+DMA1_Channel2_IRQHandler
+DMA1_Channel3_IRQHandler
+DMA1_Channel4_IRQHandler
+DMA1_Channel5_IRQHandler
+DMA1_Channel6_IRQHandler
+DMA1_Channel7_IRQHandler
+ADC1_2_IRQHandler
+USB_HP_CAN1_TX_IRQHandler
+USB_LP_CAN1_RX0_IRQHandler
+CAN1_RX1_IRQHandler
+CAN1_SCE_IRQHandler
+EXTI9_5_IRQHandler
+TIM1_BRK_IRQHandler
+TIM1_UP_IRQHandler
+TIM1_TRG_COM_IRQHandler
+TIM1_CC_IRQHandler
+TIM2_IRQHandler
+TIM3_IRQHandler
+I2C1_EV_IRQHandler
+I2C1_ER_IRQHandler
+SPI1_IRQHandler
+USART1_IRQHandler
+USART2_IRQHandler
+EXTI15_10_IRQHandler
+RTC_Alarm_IRQHandler
+USBWakeUp_IRQHandler
+
+                B       .
+
+                ENDP
+
+                ALIGN
+
+;*******************************************************************************
+; User Stack and Heap initialization
+;*******************************************************************************
+                 IF      :DEF:__MICROLIB
+                
+                 EXPORT  __initial_sp
+                 EXPORT  __heap_base
+                 EXPORT  __heap_limit
+                
+                 ELSE
+                
+                 IMPORT  __use_two_region_memory
+                 EXPORT  __user_initial_stackheap
+                 
+__user_initial_stackheap
+
+                 LDR     R0, =  Heap_Mem
+                 LDR     R1, =(Stack_Mem + Stack_Size)
+                 LDR     R2, = (Heap_Mem +  Heap_Size)
+                 LDR     R3, = Stack_Mem
+                 BX      LR
+
+                 ALIGN
+
+                 ENDIF
+
+                 END
+
+;************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE*****

bsp/stm32f10x_HAL/Libraries/CMSIS/Device/ST/STM32F1xx/Source/Templates/arm/startup_stm32f103xb.s

@@ -0,0 +1,324 @@
+;******************** (C) COPYRIGHT 2017 STMicroelectronics ********************
+;* File Name          : startup_stm32f103xb.s
+;* Author             : MCD Application Team
+;* Version            : V4.2.0
+;* Date               : 31-March-2017
+;* Description        : STM32F103xB Devices vector table for MDK-ARM toolchain. 
+;*                      This module performs:
+;*                      - Set the initial SP
+;*                      - Set the initial PC == Reset_Handler
+;*                      - Set the vector table entries with the exceptions ISR address
+;*                      - Configure the clock system
+;*                      - Branches to __main in the C library (which eventually
+;*                        calls main()).
+;*                      After Reset the Cortex-M3 processor is in Thread mode,
+;*                      priority is Privileged, and the Stack is set to Main.
+;********************************************************************************
+;*
+;* <h2><center>&copy; COPYRIGHT(c) 2017 STMicroelectronics</center></h2>
+;*
+;* Redistribution and use in source and binary forms, with or without modification,
+;* are permitted provided that the following conditions are met:
+;*   1. Redistributions of source code must retain the above copyright notice,
+;*      this list of conditions and the following disclaimer.
+;*   2. Redistributions in binary form must reproduce the above copyright notice,
+;*      this list of conditions and the following disclaimer in the documentation
+;*      and/or other materials provided with the distribution.
+;*   3. Neither the name of STMicroelectronics nor the names of its contributors
+;*      may be used to endorse or promote products derived from this software
+;*      without specific prior written permission.
+;*
+;* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+;* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+;* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+;* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+;* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+;* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+;* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+;* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+;* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+;* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+; 
+;*******************************************************************************
+
+; Amount of memory (in bytes) allocated for Stack
+; Tailor this value to your application needs
+; <h> Stack Configuration
+;   <o> Stack Size (in Bytes) <0x0-0xFFFFFFFF:8>
+; </h>
+
+Stack_Size      EQU     0x00000400
+
+                AREA    STACK, NOINIT, READWRITE, ALIGN=3
+Stack_Mem       SPACE   Stack_Size
+__initial_sp
+
+
+; <h> Heap Configuration
+;   <o>  Heap Size (in Bytes) <0x0-0xFFFFFFFF:8>
+; </h>
+
+Heap_Size       EQU     0x00000200
+
+                AREA    HEAP, NOINIT, READWRITE, ALIGN=3
+__heap_base
+Heap_Mem        SPACE   Heap_Size
+__heap_limit
+
+                PRESERVE8
+                THUMB
+
+
+; Vector Table Mapped to Address 0 at Reset
+                AREA    RESET, DATA, READONLY
+                EXPORT  __Vectors
+                EXPORT  __Vectors_End
+                EXPORT  __Vectors_Size
+
+__Vectors       DCD     __initial_sp               ; Top of Stack
+                DCD     Reset_Handler              ; Reset Handler
+                DCD     NMI_Handler                ; NMI Handler
+                DCD     HardFault_Handler          ; Hard Fault Handler
+                DCD     MemManage_Handler          ; MPU Fault Handler
+                DCD     BusFault_Handler           ; Bus Fault Handler
+                DCD     UsageFault_Handler         ; Usage Fault Handler
+                DCD     0                          ; Reserved
+                DCD     0                          ; Reserved
+                DCD     0                          ; Reserved
+                DCD     0                          ; Reserved
+                DCD     SVC_Handler                ; SVCall Handler
+                DCD     DebugMon_Handler           ; Debug Monitor Handler
+                DCD     0                          ; Reserved
+                DCD     PendSV_Handler             ; PendSV Handler
+                DCD     SysTick_Handler            ; SysTick Handler
+
+                ; External Interrupts
+                DCD     WWDG_IRQHandler            ; Window Watchdog
+                DCD     PVD_IRQHandler             ; PVD through EXTI Line detect
+                DCD     TAMPER_IRQHandler          ; Tamper
+                DCD     RTC_IRQHandler             ; RTC
+                DCD     FLASH_IRQHandler           ; Flash
+                DCD     RCC_IRQHandler             ; RCC
+                DCD     EXTI0_IRQHandler           ; EXTI Line 0
+                DCD     EXTI1_IRQHandler           ; EXTI Line 1
+                DCD     EXTI2_IRQHandler           ; EXTI Line 2
+                DCD     EXTI3_IRQHandler           ; EXTI Line 3
+                DCD     EXTI4_IRQHandler           ; EXTI Line 4
+                DCD     DMA1_Channel1_IRQHandler   ; DMA1 Channel 1
+                DCD     DMA1_Channel2_IRQHandler   ; DMA1 Channel 2
+                DCD     DMA1_Channel3_IRQHandler   ; DMA1 Channel 3
+                DCD     DMA1_Channel4_IRQHandler   ; DMA1 Channel 4
+                DCD     DMA1_Channel5_IRQHandler   ; DMA1 Channel 5
+                DCD     DMA1_Channel6_IRQHandler   ; DMA1 Channel 6
+                DCD     DMA1_Channel7_IRQHandler   ; DMA1 Channel 7
+                DCD     ADC1_2_IRQHandler          ; ADC1_2
+                DCD     USB_HP_CAN1_TX_IRQHandler  ; USB High Priority or CAN1 TX
+                DCD     USB_LP_CAN1_RX0_IRQHandler ; USB Low  Priority or CAN1 RX0
+                DCD     CAN1_RX1_IRQHandler        ; CAN1 RX1
+                DCD     CAN1_SCE_IRQHandler        ; CAN1 SCE
+                DCD     EXTI9_5_IRQHandler         ; EXTI Line 9..5
+                DCD     TIM1_BRK_IRQHandler        ; TIM1 Break
+                DCD     TIM1_UP_IRQHandler         ; TIM1 Update
+                DCD     TIM1_TRG_COM_IRQHandler    ; TIM1 Trigger and Commutation
+                DCD     TIM1_CC_IRQHandler         ; TIM1 Capture Compare
+                DCD     TIM2_IRQHandler            ; TIM2
+                DCD     TIM3_IRQHandler            ; TIM3
+                DCD     TIM4_IRQHandler            ; TIM4
+                DCD     I2C1_EV_IRQHandler         ; I2C1 Event
+                DCD     I2C1_ER_IRQHandler         ; I2C1 Error
+                DCD     I2C2_EV_IRQHandler         ; I2C2 Event
+                DCD     I2C2_ER_IRQHandler         ; I2C2 Error
+                DCD     SPI1_IRQHandler            ; SPI1
+                DCD     SPI2_IRQHandler            ; SPI2
+                DCD     USART1_IRQHandler          ; USART1
+                DCD     USART2_IRQHandler          ; USART2
+                DCD     USART3_IRQHandler          ; USART3
+                DCD     EXTI15_10_IRQHandler       ; EXTI Line 15..10
+                DCD     RTC_Alarm_IRQHandler        ; RTC Alarm through EXTI Line
+                DCD     USBWakeUp_IRQHandler       ; USB Wakeup from suspend
+__Vectors_End
+
+__Vectors_Size  EQU  __Vectors_End - __Vectors
+
+                AREA    |.text|, CODE, READONLY
+
+; Reset handler
+Reset_Handler    PROC
+                 EXPORT  Reset_Handler             [WEAK]
+     IMPORT  __main
+     IMPORT  SystemInit
+                 LDR     R0, =SystemInit
+                 BLX     R0
+                 LDR     R0, =__main
+                 BX      R0
+                 ENDP
+
+; Dummy Exception Handlers (infinite loops which can be modified)
+
+NMI_Handler     PROC
+                EXPORT  NMI_Handler                [WEAK]
+                B       .
+                ENDP
+HardFault_Handler\
+                PROC
+                EXPORT  HardFault_Handler          [WEAK]
+                B       .
+                ENDP
+MemManage_Handler\
+                PROC
+                EXPORT  MemManage_Handler          [WEAK]
+                B       .
+                ENDP
+BusFault_Handler\
+                PROC
+                EXPORT  BusFault_Handler           [WEAK]
+                B       .
+                ENDP
+UsageFault_Handler\
+                PROC
+                EXPORT  UsageFault_Handler         [WEAK]
+                B       .
+                ENDP
+SVC_Handler     PROC
+                EXPORT  SVC_Handler                [WEAK]
+                B       .
+                ENDP
+DebugMon_Handler\
+                PROC
+                EXPORT  DebugMon_Handler           [WEAK]
+                B       .
+                ENDP
+PendSV_Handler  PROC
+                EXPORT  PendSV_Handler             [WEAK]
+                B       .
+                ENDP
+SysTick_Handler PROC
+                EXPORT  SysTick_Handler            [WEAK]
+                B       .
+                ENDP
+
+Default_Handler PROC
+
+                EXPORT  WWDG_IRQHandler            [WEAK]
+                EXPORT  PVD_IRQHandler             [WEAK]
+                EXPORT  TAMPER_IRQHandler          [WEAK]
+                EXPORT  RTC_IRQHandler             [WEAK]
+                EXPORT  FLASH_IRQHandler           [WEAK]
+                EXPORT  RCC_IRQHandler             [WEAK]
+                EXPORT  EXTI0_IRQHandler           [WEAK]
+                EXPORT  EXTI1_IRQHandler           [WEAK]
+                EXPORT  EXTI2_IRQHandler           [WEAK]
+                EXPORT  EXTI3_IRQHandler           [WEAK]
+                EXPORT  EXTI4_IRQHandler           [WEAK]
+                EXPORT  DMA1_Channel1_IRQHandler   [WEAK]
+                EXPORT  DMA1_Channel2_IRQHandler   [WEAK]
+                EXPORT  DMA1_Channel3_IRQHandler   [WEAK]
+                EXPORT  DMA1_Channel4_IRQHandler   [WEAK]
+                EXPORT  DMA1_Channel5_IRQHandler   [WEAK]
+                EXPORT  DMA1_Channel6_IRQHandler   [WEAK]
+                EXPORT  DMA1_Channel7_IRQHandler   [WEAK]
+                EXPORT  ADC1_2_IRQHandler          [WEAK]
+                EXPORT  USB_HP_CAN1_TX_IRQHandler  [WEAK]
+                EXPORT  USB_LP_CAN1_RX0_IRQHandler [WEAK]
+                EXPORT  CAN1_RX1_IRQHandler        [WEAK]
+                EXPORT  CAN1_SCE_IRQHandler        [WEAK]
+                EXPORT  EXTI9_5_IRQHandler         [WEAK]
+                EXPORT  TIM1_BRK_IRQHandler        [WEAK]
+                EXPORT  TIM1_UP_IRQHandler         [WEAK]
+                EXPORT  TIM1_TRG_COM_IRQHandler    [WEAK]
+                EXPORT  TIM1_CC_IRQHandler         [WEAK]
+                EXPORT  TIM2_IRQHandler            [WEAK]
+                EXPORT  TIM3_IRQHandler            [WEAK]
+                EXPORT  TIM4_IRQHandler            [WEAK]
+                EXPORT  I2C1_EV_IRQHandler         [WEAK]
+                EXPORT  I2C1_ER_IRQHandler         [WEAK]
+                EXPORT  I2C2_EV_IRQHandler         [WEAK]
+                EXPORT  I2C2_ER_IRQHandler         [WEAK]
+                EXPORT  SPI1_IRQHandler            [WEAK]
+                EXPORT  SPI2_IRQHandler            [WEAK]
+                EXPORT  USART1_IRQHandler          [WEAK]
+                EXPORT  USART2_IRQHandler          [WEAK]
+                EXPORT  USART3_IRQHandler          [WEAK]
+                EXPORT  EXTI15_10_IRQHandler       [WEAK]
+                EXPORT  RTC_Alarm_IRQHandler        [WEAK]
+                EXPORT  USBWakeUp_IRQHandler       [WEAK]
+
+WWDG_IRQHandler
+PVD_IRQHandler
+TAMPER_IRQHandler
+RTC_IRQHandler
+FLASH_IRQHandler
+RCC_IRQHandler
+EXTI0_IRQHandler
+EXTI1_IRQHandler
+EXTI2_IRQHandler
+EXTI3_IRQHandler
+EXTI4_IRQHandler
+DMA1_Channel1_IRQHandler
+DMA1_Channel2_IRQHandler
+DMA1_Channel3_IRQHandler
+DMA1_Channel4_IRQHandler
+DMA1_Channel5_IRQHandler
+DMA1_Channel6_IRQHandler
+DMA1_Channel7_IRQHandler
+ADC1_2_IRQHandler
+USB_HP_CAN1_TX_IRQHandler
+USB_LP_CAN1_RX0_IRQHandler
+CAN1_RX1_IRQHandler
+CAN1_SCE_IRQHandler
+EXTI9_5_IRQHandler
+TIM1_BRK_IRQHandler
+TIM1_UP_IRQHandler
+TIM1_TRG_COM_IRQHandler
+TIM1_CC_IRQHandler
+TIM2_IRQHandler
+TIM3_IRQHandler
+TIM4_IRQHandler
+I2C1_EV_IRQHandler
+I2C1_ER_IRQHandler
+I2C2_EV_IRQHandler
+I2C2_ER_IRQHandler
+SPI1_IRQHandler
+SPI2_IRQHandler
+USART1_IRQHandler
+USART2_IRQHandler
+USART3_IRQHandler
+EXTI15_10_IRQHandler
+RTC_Alarm_IRQHandler
+USBWakeUp_IRQHandler
+
+                B       .
+
+                ENDP
+
+                ALIGN
+
+;*******************************************************************************
+; User Stack and Heap initialization
+;*******************************************************************************
+                 IF      :DEF:__MICROLIB           
+                
+                 EXPORT  __initial_sp
+                 EXPORT  __heap_base
+                 EXPORT  __heap_limit
+                
+                 ELSE
+                
+                 IMPORT  __use_two_region_memory
+                 EXPORT  __user_initial_stackheap
+                 
+__user_initial_stackheap
+
+                 LDR     R0, =  Heap_Mem
+                 LDR     R1, =(Stack_Mem + Stack_Size)
+                 LDR     R2, = (Heap_Mem +  Heap_Size)
+                 LDR     R3, = Stack_Mem
+                 BX      LR
+
+                 ALIGN
+
+                 ENDIF
+
+                 END
+
+;************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE*****

bsp/stm32f10x_HAL/Libraries/CMSIS/Device/ST/STM32F1xx/Source/Templates/arm/startup_stm32f103xe.s

@@ -0,0 +1,373 @@
+;******************** (C) COPYRIGHT 2017 STMicroelectronics ********************
+;* File Name          : startup_stm32f103xe.s
+;* Author             : MCD Application Team
+;* Version            : V4.2.0
+;* Date               : 31-March-2017
+;* Description        : STM32F103xE Devices vector table for MDK-ARM toolchain. 
+;*                      This module performs:
+;*                      - Set the initial SP
+;*                      - Set the initial PC == Reset_Handler
+;*                      - Set the vector table entries with the exceptions ISR address
+;*                      - Configure the clock system
+;*                      - Branches to __main in the C library (which eventually
+;*                        calls main()).
+;*                      After Reset the Cortex-M3 processor is in Thread mode,
+;*                      priority is Privileged, and the Stack is set to Main.
+;********************************************************************************
+;*
+;* <h2><center>&copy; COPYRIGHT(c) 2017 STMicroelectronics</center></h2>
+;*
+;* Redistribution and use in source and binary forms, with or without modification,
+;* are permitted provided that the following conditions are met:
+;*   1. Redistributions of source code must retain the above copyright notice,
+;*      this list of conditions and the following disclaimer.
+;*   2. Redistributions in binary form must reproduce the above copyright notice,
+;*      this list of conditions and the following disclaimer in the documentation
+;*      and/or other materials provided with the distribution.
+;*   3. Neither the name of STMicroelectronics nor the names of its contributors
+;*      may be used to endorse or promote products derived from this software
+;*      without specific prior written permission.
+;*
+;* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+;* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+;* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+;* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+;* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+;* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+;* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+;* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+;* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+;* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+; 
+;*******************************************************************************
+
+; Amount of memory (in bytes) allocated for Stack
+; Tailor this value to your application needs
+; <h> Stack Configuration
+;   <o> Stack Size (in Bytes) <0x0-0xFFFFFFFF:8>
+; </h>
+
+Stack_Size      EQU     0x00000400
+
+                AREA    STACK, NOINIT, READWRITE, ALIGN=3
+Stack_Mem       SPACE   Stack_Size
+__initial_sp
+                                                  
+; <h> Heap Configuration
+;   <o>  Heap Size (in Bytes) <0x0-0xFFFFFFFF:8>
+; </h>
+
+Heap_Size       EQU     0x00000200
+
+                AREA    HEAP, NOINIT, READWRITE, ALIGN=3
+__heap_base
+Heap_Mem        SPACE   Heap_Size
+__heap_limit
+
+                PRESERVE8
+                THUMB
+
+
+; Vector Table Mapped to Address 0 at Reset
+                AREA    RESET, DATA, READONLY
+                EXPORT  __Vectors
+                EXPORT  __Vectors_End
+                EXPORT  __Vectors_Size
+
+__Vectors       DCD     __initial_sp               ; Top of Stack
+                DCD     Reset_Handler              ; Reset Handler
+                DCD     NMI_Handler                ; NMI Handler
+                DCD     HardFault_Handler          ; Hard Fault Handler
+                DCD     MemManage_Handler          ; MPU Fault Handler
+                DCD     BusFault_Handler           ; Bus Fault Handler
+                DCD     UsageFault_Handler         ; Usage Fault Handler
+                DCD     0                          ; Reserved
+                DCD     0                          ; Reserved
+                DCD     0                          ; Reserved
+                DCD     0                          ; Reserved
+                DCD     SVC_Handler                ; SVCall Handler
+                DCD     DebugMon_Handler           ; Debug Monitor Handler
+                DCD     0                          ; Reserved
+                DCD     PendSV_Handler             ; PendSV Handler
+                DCD     SysTick_Handler            ; SysTick Handler
+
+                ; External Interrupts
+                DCD     WWDG_IRQHandler            ; Window Watchdog
+                DCD     PVD_IRQHandler             ; PVD through EXTI Line detect
+                DCD     TAMPER_IRQHandler          ; Tamper
+                DCD     RTC_IRQHandler             ; RTC
+                DCD     FLASH_IRQHandler           ; Flash
+                DCD     RCC_IRQHandler             ; RCC
+                DCD     EXTI0_IRQHandler           ; EXTI Line 0
+                DCD     EXTI1_IRQHandler           ; EXTI Line 1
+                DCD     EXTI2_IRQHandler           ; EXTI Line 2
+                DCD     EXTI3_IRQHandler           ; EXTI Line 3
+                DCD     EXTI4_IRQHandler           ; EXTI Line 4
+                DCD     DMA1_Channel1_IRQHandler   ; DMA1 Channel 1
+                DCD     DMA1_Channel2_IRQHandler   ; DMA1 Channel 2
+                DCD     DMA1_Channel3_IRQHandler   ; DMA1 Channel 3
+                DCD     DMA1_Channel4_IRQHandler   ; DMA1 Channel 4
+                DCD     DMA1_Channel5_IRQHandler   ; DMA1 Channel 5
+                DCD     DMA1_Channel6_IRQHandler   ; DMA1 Channel 6
+                DCD     DMA1_Channel7_IRQHandler   ; DMA1 Channel 7
+                DCD     ADC1_2_IRQHandler          ; ADC1 & ADC2
+                DCD     USB_HP_CAN1_TX_IRQHandler  ; USB High Priority or CAN1 TX
+                DCD     USB_LP_CAN1_RX0_IRQHandler ; USB Low  Priority or CAN1 RX0
+                DCD     CAN1_RX1_IRQHandler        ; CAN1 RX1
+                DCD     CAN1_SCE_IRQHandler        ; CAN1 SCE
+                DCD     EXTI9_5_IRQHandler         ; EXTI Line 9..5
+                DCD     TIM1_BRK_IRQHandler        ; TIM1 Break
+                DCD     TIM1_UP_IRQHandler         ; TIM1 Update
+                DCD     TIM1_TRG_COM_IRQHandler    ; TIM1 Trigger and Commutation
+                DCD     TIM1_CC_IRQHandler         ; TIM1 Capture Compare
+                DCD     TIM2_IRQHandler            ; TIM2
+                DCD     TIM3_IRQHandler            ; TIM3
+                DCD     TIM4_IRQHandler            ; TIM4
+                DCD     I2C1_EV_IRQHandler         ; I2C1 Event
+                DCD     I2C1_ER_IRQHandler         ; I2C1 Error
+                DCD     I2C2_EV_IRQHandler         ; I2C2 Event
+                DCD     I2C2_ER_IRQHandler         ; I2C2 Error
+                DCD     SPI1_IRQHandler            ; SPI1
+                DCD     SPI2_IRQHandler            ; SPI2
+                DCD     USART1_IRQHandler          ; USART1
+                DCD     USART2_IRQHandler          ; USART2
+                DCD     USART3_IRQHandler          ; USART3
+                DCD     EXTI15_10_IRQHandler       ; EXTI Line 15..10
+                DCD     RTC_Alarm_IRQHandler        ; RTC Alarm through EXTI Line
+                DCD     USBWakeUp_IRQHandler       ; USB Wakeup from suspend
+                DCD     TIM8_BRK_IRQHandler        ; TIM8 Break
+                DCD     TIM8_UP_IRQHandler         ; TIM8 Update
+                DCD     TIM8_TRG_COM_IRQHandler    ; TIM8 Trigger and Commutation
+                DCD     TIM8_CC_IRQHandler         ; TIM8 Capture Compare
+                DCD     ADC3_IRQHandler            ; ADC3
+                DCD     FSMC_IRQHandler            ; FSMC
+                DCD     SDIO_IRQHandler            ; SDIO
+                DCD     TIM5_IRQHandler            ; TIM5
+                DCD     SPI3_IRQHandler            ; SPI3
+                DCD     UART4_IRQHandler           ; UART4
+                DCD     UART5_IRQHandler           ; UART5
+                DCD     TIM6_IRQHandler            ; TIM6
+                DCD     TIM7_IRQHandler            ; TIM7
+                DCD     DMA2_Channel1_IRQHandler   ; DMA2 Channel1
+                DCD     DMA2_Channel2_IRQHandler   ; DMA2 Channel2
+                DCD     DMA2_Channel3_IRQHandler   ; DMA2 Channel3
+                DCD     DMA2_Channel4_5_IRQHandler ; DMA2 Channel4 & Channel5
+__Vectors_End
+
+__Vectors_Size  EQU  __Vectors_End - __Vectors
+
+                AREA    |.text|, CODE, READONLY
+                
+; Reset handler
+Reset_Handler   PROC
+                EXPORT  Reset_Handler             [WEAK]
+                IMPORT  __main
+                IMPORT  SystemInit
+                LDR     R0, =SystemInit
+                BLX     R0               
+                LDR     R0, =__main
+                BX      R0
+                ENDP
+                
+; Dummy Exception Handlers (infinite loops which can be modified)
+
+NMI_Handler     PROC
+                EXPORT  NMI_Handler                [WEAK]
+                B       .
+                ENDP
+HardFault_Handler\
+                PROC
+                EXPORT  HardFault_Handler          [WEAK]
+                B       .
+                ENDP
+MemManage_Handler\
+                PROC
+                EXPORT  MemManage_Handler          [WEAK]
+                B       .
+                ENDP
+BusFault_Handler\
+                PROC
+                EXPORT  BusFault_Handler           [WEAK]
+                B       .
+                ENDP
+UsageFault_Handler\
+                PROC
+                EXPORT  UsageFault_Handler         [WEAK]
+                B       .
+                ENDP
+SVC_Handler     PROC
+                EXPORT  SVC_Handler                [WEAK]
+                B       .
+                ENDP
+DebugMon_Handler\
+                PROC
+                EXPORT  DebugMon_Handler           [WEAK]
+                B       .
+                ENDP
+PendSV_Handler  PROC
+                EXPORT  PendSV_Handler             [WEAK]
+                B       .
+                ENDP
+SysTick_Handler PROC
+                EXPORT  SysTick_Handler            [WEAK]
+                B       .
+                ENDP
+
+Default_Handler PROC
+
+                EXPORT  WWDG_IRQHandler            [WEAK]
+                EXPORT  PVD_IRQHandler             [WEAK]
+                EXPORT  TAMPER_IRQHandler          [WEAK]
+                EXPORT  RTC_IRQHandler             [WEAK]
+                EXPORT  FLASH_IRQHandler           [WEAK]
+                EXPORT  RCC_IRQHandler             [WEAK]
+                EXPORT  EXTI0_IRQHandler           [WEAK]
+                EXPORT  EXTI1_IRQHandler           [WEAK]
+                EXPORT  EXTI2_IRQHandler           [WEAK]
+                EXPORT  EXTI3_IRQHandler           [WEAK]
+                EXPORT  EXTI4_IRQHandler           [WEAK]
+                EXPORT  DMA1_Channel1_IRQHandler   [WEAK]
+                EXPORT  DMA1_Channel2_IRQHandler   [WEAK]
+                EXPORT  DMA1_Channel3_IRQHandler   [WEAK]
+                EXPORT  DMA1_Channel4_IRQHandler   [WEAK]
+                EXPORT  DMA1_Channel5_IRQHandler   [WEAK]
+                EXPORT  DMA1_Channel6_IRQHandler   [WEAK]
+                EXPORT  DMA1_Channel7_IRQHandler   [WEAK]
+                EXPORT  ADC1_2_IRQHandler          [WEAK]
+                EXPORT  USB_HP_CAN1_TX_IRQHandler  [WEAK]
+                EXPORT  USB_LP_CAN1_RX0_IRQHandler [WEAK]
+                EXPORT  CAN1_RX1_IRQHandler        [WEAK]
+                EXPORT  CAN1_SCE_IRQHandler        [WEAK]
+                EXPORT  EXTI9_5_IRQHandler         [WEAK]
+                EXPORT  TIM1_BRK_IRQHandler        [WEAK]
+                EXPORT  TIM1_UP_IRQHandler         [WEAK]
+                EXPORT  TIM1_TRG_COM_IRQHandler    [WEAK]
+                EXPORT  TIM1_CC_IRQHandler         [WEAK]
+                EXPORT  TIM2_IRQHandler            [WEAK]
+                EXPORT  TIM3_IRQHandler            [WEAK]
+                EXPORT  TIM4_IRQHandler            [WEAK]
+                EXPORT  I2C1_EV_IRQHandler         [WEAK]
+                EXPORT  I2C1_ER_IRQHandler         [WEAK]
+                EXPORT  I2C2_EV_IRQHandler         [WEAK]
+                EXPORT  I2C2_ER_IRQHandler         [WEAK]
+                EXPORT  SPI1_IRQHandler            [WEAK]
+                EXPORT  SPI2_IRQHandler            [WEAK]
+                EXPORT  USART1_IRQHandler          [WEAK]
+                EXPORT  USART2_IRQHandler          [WEAK]
+                EXPORT  USART3_IRQHandler          [WEAK]
+                EXPORT  EXTI15_10_IRQHandler       [WEAK]
+                EXPORT  RTC_Alarm_IRQHandler        [WEAK]
+                EXPORT  USBWakeUp_IRQHandler       [WEAK]
+                EXPORT  TIM8_BRK_IRQHandler        [WEAK]
+                EXPORT  TIM8_UP_IRQHandler         [WEAK]
+                EXPORT  TIM8_TRG_COM_IRQHandler    [WEAK]
+                EXPORT  TIM8_CC_IRQHandler         [WEAK]
+                EXPORT  ADC3_IRQHandler            [WEAK]
+                EXPORT  FSMC_IRQHandler            [WEAK]
+                EXPORT  SDIO_IRQHandler            [WEAK]
+                EXPORT  TIM5_IRQHandler            [WEAK]
+                EXPORT  SPI3_IRQHandler            [WEAK]
+                EXPORT  UART4_IRQHandler           [WEAK]
+                EXPORT  UART5_IRQHandler           [WEAK]
+                EXPORT  TIM6_IRQHandler            [WEAK]
+                EXPORT  TIM7_IRQHandler            [WEAK]
+                EXPORT  DMA2_Channel1_IRQHandler   [WEAK]
+                EXPORT  DMA2_Channel2_IRQHandler   [WEAK]
+                EXPORT  DMA2_Channel3_IRQHandler   [WEAK]
+                EXPORT  DMA2_Channel4_5_IRQHandler [WEAK]
+
+WWDG_IRQHandler
+PVD_IRQHandler
+TAMPER_IRQHandler
+RTC_IRQHandler
+FLASH_IRQHandler
+RCC_IRQHandler
+EXTI0_IRQHandler
+EXTI1_IRQHandler
+EXTI2_IRQHandler
+EXTI3_IRQHandler
+EXTI4_IRQHandler
+DMA1_Channel1_IRQHandler
+DMA1_Channel2_IRQHandler
+DMA1_Channel3_IRQHandler
+DMA1_Channel4_IRQHandler
+DMA1_Channel5_IRQHandler
+DMA1_Channel6_IRQHandler
+DMA1_Channel7_IRQHandler
+ADC1_2_IRQHandler
+USB_HP_CAN1_TX_IRQHandler
+USB_LP_CAN1_RX0_IRQHandler
+CAN1_RX1_IRQHandler
+CAN1_SCE_IRQHandler
+EXTI9_5_IRQHandler
+TIM1_BRK_IRQHandler
+TIM1_UP_IRQHandler
+TIM1_TRG_COM_IRQHandler
+TIM1_CC_IRQHandler
+TIM2_IRQHandler
+TIM3_IRQHandler
+TIM4_IRQHandler
+I2C1_EV_IRQHandler
+I2C1_ER_IRQHandler
+I2C2_EV_IRQHandler
+I2C2_ER_IRQHandler
+SPI1_IRQHandler
+SPI2_IRQHandler
+USART1_IRQHandler
+USART2_IRQHandler
+USART3_IRQHandler
+EXTI15_10_IRQHandler
+RTC_Alarm_IRQHandler
+USBWakeUp_IRQHandler
+TIM8_BRK_IRQHandler
+TIM8_UP_IRQHandler
+TIM8_TRG_COM_IRQHandler
+TIM8_CC_IRQHandler
+ADC3_IRQHandler
+FSMC_IRQHandler
+SDIO_IRQHandler
+TIM5_IRQHandler
+SPI3_IRQHandler
+UART4_IRQHandler
+UART5_IRQHandler
+TIM6_IRQHandler
+TIM7_IRQHandler
+DMA2_Channel1_IRQHandler
+DMA2_Channel2_IRQHandler
+DMA2_Channel3_IRQHandler
+DMA2_Channel4_5_IRQHandler
+                B       .
+
+                ENDP
+
+                ALIGN
+
+;*******************************************************************************
+; User Stack and Heap initialization
+;*******************************************************************************
+                 IF      :DEF:__MICROLIB
+                
+                 EXPORT  __initial_sp
+                 EXPORT  __heap_base
+                 EXPORT  __heap_limit
+                
+                 ELSE
+                
+                 IMPORT  __use_two_region_memory
+                 EXPORT  __user_initial_stackheap
+                 
+__user_initial_stackheap
+
+                 LDR     R0, =  Heap_Mem
+                 LDR     R1, =(Stack_Mem + Stack_Size)
+                 LDR     R2, = (Heap_Mem +  Heap_Size)
+                 LDR     R3, = Stack_Mem
+                 BX      LR
+
+                 ALIGN
+
+                 ENDIF
+
+                 END
+
+;************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE*****

bsp/stm32f10x_HAL/Libraries/CMSIS/Device/ST/STM32F1xx/Source/Templates/arm/startup_stm32f103xg.s

@@ -0,0 +1,373 @@
+;******************** (C) COPYRIGHT 2017 STMicroelectronics ********************
+;* File Name          : startup_stm32f103xg.s
+;* Author             : MCD Application Team
+;* Version            : V4.2.0
+;* Date               : 31-March-2017
+;* Description        : STM32F103xG Devices vector table for MDK-ARM toolchain. 
+;*                      This module performs:
+;*                      - Set the initial SP
+;*                      - Set the initial PC == Reset_Handler
+;*                      - Set the vector table entries with the exceptions ISR address
+;*                      - Configure the clock system
+;*                      - Branches to __main in the C library (which eventually
+;*                        calls main()).
+;*                      After Reset the Cortex-M3 processor is in Thread mode,
+;*                      priority is Privileged, and the Stack is set to Main.
+;********************************************************************************
+;*
+;* <h2><center>&copy; COPYRIGHT(c) 2017 STMicroelectronics</center></h2>
+;*
+;* Redistribution and use in source and binary forms, with or without modification,
+;* are permitted provided that the following conditions are met:
+;*   1. Redistributions of source code must retain the above copyright notice,
+;*      this list of conditions and the following disclaimer.
+;*   2. Redistributions in binary form must reproduce the above copyright notice,
+;*      this list of conditions and the following disclaimer in the documentation
+;*      and/or other materials provided with the distribution.
+;*   3. Neither the name of STMicroelectronics nor the names of its contributors
+;*      may be used to endorse or promote products derived from this software
+;*      without specific prior written permission.
+;*
+;* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+;* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+;* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+;* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+;* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+;* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+;* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+;* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+;* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+;* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+; 
+;*******************************************************************************
+
+; Amount of memory (in bytes) allocated for Stack
+; Tailor this value to your application needs
+; <h> Stack Configuration
+;   <o> Stack Size (in Bytes) <0x0-0xFFFFFFFF:8>
+; </h>
+
+Stack_Size      EQU     0x00000400
+
+                AREA    STACK, NOINIT, READWRITE, ALIGN=3
+Stack_Mem       SPACE   Stack_Size
+__initial_sp
+                                                  
+; <h> Heap Configuration
+;   <o>  Heap Size (in Bytes) <0x0-0xFFFFFFFF:8>
+; </h>
+
+Heap_Size       EQU     0x00000200
+
+                AREA    HEAP, NOINIT, READWRITE, ALIGN=3
+__heap_base
+Heap_Mem        SPACE   Heap_Size
+__heap_limit
+
+                PRESERVE8
+                THUMB
+
+
+; Vector Table Mapped to Address 0 at Reset
+                AREA    RESET, DATA, READONLY
+                EXPORT  __Vectors
+                EXPORT  __Vectors_End
+                EXPORT  __Vectors_Size
+
+__Vectors       DCD     __initial_sp               ; Top of Stack
+                DCD     Reset_Handler              ; Reset Handler
+                DCD     NMI_Handler                ; NMI Handler
+                DCD     HardFault_Handler          ; Hard Fault Handler
+                DCD     MemManage_Handler          ; MPU Fault Handler
+                DCD     BusFault_Handler           ; Bus Fault Handler
+                DCD     UsageFault_Handler         ; Usage Fault Handler
+                DCD     0                          ; Reserved
+                DCD     0                          ; Reserved
+                DCD     0                          ; Reserved
+                DCD     0                          ; Reserved
+                DCD     SVC_Handler                ; SVCall Handler
+                DCD     DebugMon_Handler           ; Debug Monitor Handler
+                DCD     0                          ; Reserved
+                DCD     PendSV_Handler             ; PendSV Handler
+                DCD     SysTick_Handler            ; SysTick Handler
+
+                ; External Interrupts
+                DCD     WWDG_IRQHandler               ; Window Watchdog
+                DCD     PVD_IRQHandler                ; PVD through EXTI Line detect
+                DCD     TAMPER_IRQHandler             ; Tamper
+                DCD     RTC_IRQHandler                ; RTC
+                DCD     FLASH_IRQHandler              ; Flash
+                DCD     RCC_IRQHandler                ; RCC
+                DCD     EXTI0_IRQHandler              ; EXTI Line 0
+                DCD     EXTI1_IRQHandler              ; EXTI Line 1
+                DCD     EXTI2_IRQHandler              ; EXTI Line 2
+                DCD     EXTI3_IRQHandler              ; EXTI Line 3
+                DCD     EXTI4_IRQHandler              ; EXTI Line 4
+                DCD     DMA1_Channel1_IRQHandler      ; DMA1 Channel 1
+                DCD     DMA1_Channel2_IRQHandler      ; DMA1 Channel 2
+                DCD     DMA1_Channel3_IRQHandler      ; DMA1 Channel 3
+                DCD     DMA1_Channel4_IRQHandler      ; DMA1 Channel 4
+                DCD     DMA1_Channel5_IRQHandler      ; DMA1 Channel 5
+                DCD     DMA1_Channel6_IRQHandler      ; DMA1 Channel 6
+                DCD     DMA1_Channel7_IRQHandler      ; DMA1 Channel 7
+                DCD     ADC1_2_IRQHandler             ; ADC1 & ADC2
+                DCD     USB_HP_CAN1_TX_IRQHandler     ; USB High Priority or CAN1 TX
+                DCD     USB_LP_CAN1_RX0_IRQHandler    ; USB Low  Priority or CAN1 RX0
+                DCD     CAN1_RX1_IRQHandler           ; CAN1 RX1
+                DCD     CAN1_SCE_IRQHandler           ; CAN1 SCE
+                DCD     EXTI9_5_IRQHandler            ; EXTI Line 9..5
+                DCD     TIM1_BRK_TIM9_IRQHandler      ; TIM1 Break and TIM9
+                DCD     TIM1_UP_TIM10_IRQHandler      ; TIM1 Update and TIM10
+                DCD     TIM1_TRG_COM_TIM11_IRQHandler ; TIM1 Trigger and Commutation and TIM11
+                DCD     TIM1_CC_IRQHandler            ; TIM1 Capture Compare
+                DCD     TIM2_IRQHandler               ; TIM2
+                DCD     TIM3_IRQHandler               ; TIM3
+                DCD     TIM4_IRQHandler               ; TIM4
+                DCD     I2C1_EV_IRQHandler            ; I2C1 Event
+                DCD     I2C1_ER_IRQHandler            ; I2C1 Error
+                DCD     I2C2_EV_IRQHandler            ; I2C2 Event
+                DCD     I2C2_ER_IRQHandler            ; I2C2 Error
+                DCD     SPI1_IRQHandler               ; SPI1
+                DCD     SPI2_IRQHandler               ; SPI2
+                DCD     USART1_IRQHandler             ; USART1
+                DCD     USART2_IRQHandler             ; USART2
+                DCD     USART3_IRQHandler             ; USART3
+                DCD     EXTI15_10_IRQHandler          ; EXTI Line 15..10
+                DCD     RTC_Alarm_IRQHandler           ; RTC Alarm through EXTI Line
+                DCD     USBWakeUp_IRQHandler          ; USB Wakeup from suspend
+                DCD     TIM8_BRK_TIM12_IRQHandler     ; TIM8 Break and TIM12
+                DCD     TIM8_UP_TIM13_IRQHandler      ; TIM8 Update and TIM13
+                DCD     TIM8_TRG_COM_TIM14_IRQHandler ; TIM8 Trigger and Commutation and TIM14
+                DCD     TIM8_CC_IRQHandler            ; TIM8 Capture Compare
+                DCD     ADC3_IRQHandler               ; ADC3
+                DCD     FSMC_IRQHandler               ; FSMC
+                DCD     SDIO_IRQHandler               ; SDIO
+                DCD     TIM5_IRQHandler               ; TIM5
+                DCD     SPI3_IRQHandler               ; SPI3
+                DCD     UART4_IRQHandler              ; UART4
+                DCD     UART5_IRQHandler              ; UART5
+                DCD     TIM6_IRQHandler               ; TIM6
+                DCD     TIM7_IRQHandler               ; TIM7
+                DCD     DMA2_Channel1_IRQHandler      ; DMA2 Channel1
+                DCD     DMA2_Channel2_IRQHandler      ; DMA2 Channel2
+                DCD     DMA2_Channel3_IRQHandler      ; DMA2 Channel3
+                DCD     DMA2_Channel4_5_IRQHandler    ; DMA2 Channel4 & Channel5
+__Vectors_End
+
+__Vectors_Size  EQU  __Vectors_End - __Vectors
+
+                AREA    |.text|, CODE, READONLY
+                
+; Reset handler
+Reset_Handler   PROC
+                EXPORT  Reset_Handler             [WEAK]
+                IMPORT  __main
+                IMPORT  SystemInit
+                LDR     R0, =SystemInit
+                BLX     R0               
+                LDR     R0, =__main
+                BX      R0
+                ENDP
+                
+; Dummy Exception Handlers (infinite loops which can be modified)
+
+NMI_Handler     PROC
+                EXPORT  NMI_Handler                [WEAK]
+                B       .
+                ENDP
+HardFault_Handler\
+                PROC
+                EXPORT  HardFault_Handler          [WEAK]
+                B       .
+                ENDP
+MemManage_Handler\
+                PROC
+                EXPORT  MemManage_Handler          [WEAK]
+                B       .
+                ENDP
+BusFault_Handler\
+                PROC
+                EXPORT  BusFault_Handler           [WEAK]
+                B       .
+                ENDP
+UsageFault_Handler\
+                PROC
+                EXPORT  UsageFault_Handler         [WEAK]
+                B       .
+                ENDP
+SVC_Handler     PROC
+                EXPORT  SVC_Handler                [WEAK]
+                B       .
+                ENDP
+DebugMon_Handler\
+                PROC
+                EXPORT  DebugMon_Handler           [WEAK]
+                B       .
+                ENDP
+PendSV_Handler  PROC
+                EXPORT  PendSV_Handler             [WEAK]
+                B       .
+                ENDP
+SysTick_Handler PROC
+                EXPORT  SysTick_Handler            [WEAK]
+                B       .
+                ENDP
+
+Default_Handler PROC
+
+                EXPORT  WWDG_IRQHandler               [WEAK]
+                EXPORT  PVD_IRQHandler                [WEAK]
+                EXPORT  TAMPER_IRQHandler             [WEAK]
+                EXPORT  RTC_IRQHandler                [WEAK]
+                EXPORT  FLASH_IRQHandler              [WEAK]
+                EXPORT  RCC_IRQHandler                [WEAK]
+                EXPORT  EXTI0_IRQHandler              [WEAK]
+                EXPORT  EXTI1_IRQHandler              [WEAK]
+                EXPORT  EXTI2_IRQHandler              [WEAK]
+                EXPORT  EXTI3_IRQHandler              [WEAK]
+                EXPORT  EXTI4_IRQHandler              [WEAK]
+                EXPORT  DMA1_Channel1_IRQHandler      [WEAK]
+                EXPORT  DMA1_Channel2_IRQHandler      [WEAK]
+                EXPORT  DMA1_Channel3_IRQHandler      [WEAK]
+                EXPORT  DMA1_Channel4_IRQHandler      [WEAK]
+                EXPORT  DMA1_Channel5_IRQHandler      [WEAK]
+                EXPORT  DMA1_Channel6_IRQHandler      [WEAK]
+                EXPORT  DMA1_Channel7_IRQHandler      [WEAK]
+                EXPORT  ADC1_2_IRQHandler             [WEAK]
+                EXPORT  USB_HP_CAN1_TX_IRQHandler     [WEAK]
+                EXPORT  USB_LP_CAN1_RX0_IRQHandler    [WEAK]
+                EXPORT  CAN1_RX1_IRQHandler           [WEAK]
+                EXPORT  CAN1_SCE_IRQHandler           [WEAK]
+                EXPORT  EXTI9_5_IRQHandler            [WEAK]
+                EXPORT  TIM1_BRK_TIM9_IRQHandler      [WEAK]
+                EXPORT  TIM1_UP_TIM10_IRQHandler      [WEAK]
+                EXPORT  TIM1_TRG_COM_TIM11_IRQHandler [WEAK]
+                EXPORT  TIM1_CC_IRQHandler            [WEAK]
+                EXPORT  TIM2_IRQHandler               [WEAK]
+                EXPORT  TIM3_IRQHandler               [WEAK]
+                EXPORT  TIM4_IRQHandler               [WEAK]
+                EXPORT  I2C1_EV_IRQHandler            [WEAK]
+                EXPORT  I2C1_ER_IRQHandler            [WEAK]
+                EXPORT  I2C2_EV_IRQHandler            [WEAK]
+                EXPORT  I2C2_ER_IRQHandler            [WEAK]
+                EXPORT  SPI1_IRQHandler               [WEAK]
+                EXPORT  SPI2_IRQHandler               [WEAK]
+                EXPORT  USART1_IRQHandler             [WEAK]
+                EXPORT  USART2_IRQHandler             [WEAK]
+                EXPORT  USART3_IRQHandler             [WEAK]
+                EXPORT  EXTI15_10_IRQHandler          [WEAK]
+                EXPORT  RTC_Alarm_IRQHandler           [WEAK]
+                EXPORT  USBWakeUp_IRQHandler          [WEAK]
+                EXPORT  TIM8_BRK_TIM12_IRQHandler     [WEAK]
+                EXPORT  TIM8_UP_TIM13_IRQHandler      [WEAK]
+                EXPORT  TIM8_TRG_COM_TIM14_IRQHandler [WEAK]
+                EXPORT  TIM8_CC_IRQHandler            [WEAK]
+                EXPORT  ADC3_IRQHandler               [WEAK]
+                EXPORT  FSMC_IRQHandler               [WEAK]
+                EXPORT  SDIO_IRQHandler               [WEAK]
+                EXPORT  TIM5_IRQHandler               [WEAK]
+                EXPORT  SPI3_IRQHandler               [WEAK]
+                EXPORT  UART4_IRQHandler              [WEAK]
+                EXPORT  UART5_IRQHandler              [WEAK]
+                EXPORT  TIM6_IRQHandler               [WEAK]
+                EXPORT  TIM7_IRQHandler               [WEAK]
+                EXPORT  DMA2_Channel1_IRQHandler      [WEAK]
+                EXPORT  DMA2_Channel2_IRQHandler      [WEAK]
+                EXPORT  DMA2_Channel3_IRQHandler      [WEAK]
+                EXPORT  DMA2_Channel4_5_IRQHandler    [WEAK]
+
+WWDG_IRQHandler
+PVD_IRQHandler
+TAMPER_IRQHandler
+RTC_IRQHandler
+FLASH_IRQHandler
+RCC_IRQHandler
+EXTI0_IRQHandler
+EXTI1_IRQHandler
+EXTI2_IRQHandler
+EXTI3_IRQHandler
+EXTI4_IRQHandler
+DMA1_Channel1_IRQHandler
+DMA1_Channel2_IRQHandler
+DMA1_Channel3_IRQHandler
+DMA1_Channel4_IRQHandler
+DMA1_Channel5_IRQHandler
+DMA1_Channel6_IRQHandler
+DMA1_Channel7_IRQHandler
+ADC1_2_IRQHandler
+USB_HP_CAN1_TX_IRQHandler
+USB_LP_CAN1_RX0_IRQHandler
+CAN1_RX1_IRQHandler
+CAN1_SCE_IRQHandler
+EXTI9_5_IRQHandler
+TIM1_BRK_TIM9_IRQHandler
+TIM1_UP_TIM10_IRQHandler
+TIM1_TRG_COM_TIM11_IRQHandler
+TIM1_CC_IRQHandler
+TIM2_IRQHandler
+TIM3_IRQHandler
+TIM4_IRQHandler
+I2C1_EV_IRQHandler
+I2C1_ER_IRQHandler
+I2C2_EV_IRQHandler
+I2C2_ER_IRQHandler
+SPI1_IRQHandler
+SPI2_IRQHandler
+USART1_IRQHandler
+USART2_IRQHandler
+USART3_IRQHandler
+EXTI15_10_IRQHandler
+RTC_Alarm_IRQHandler
+USBWakeUp_IRQHandler
+TIM8_BRK_TIM12_IRQHandler
+TIM8_UP_TIM13_IRQHandler
+TIM8_TRG_COM_TIM14_IRQHandler
+TIM8_CC_IRQHandler
+ADC3_IRQHandler
+FSMC_IRQHandler
+SDIO_IRQHandler
+TIM5_IRQHandler
+SPI3_IRQHandler
+UART4_IRQHandler
+UART5_IRQHandler
+TIM6_IRQHandler
+TIM7_IRQHandler
+DMA2_Channel1_IRQHandler
+DMA2_Channel2_IRQHandler
+DMA2_Channel3_IRQHandler
+DMA2_Channel4_5_IRQHandler
+                B       .
+
+                ENDP
+
+                ALIGN
+
+;*******************************************************************************
+; User Stack and Heap initialization
+;*******************************************************************************
+                 IF      :DEF:__MICROLIB
+                
+                 EXPORT  __initial_sp
+                 EXPORT  __heap_base
+                 EXPORT  __heap_limit
+                
+                 ELSE
+                
+                 IMPORT  __use_two_region_memory
+                 EXPORT  __user_initial_stackheap
+                 
+__user_initial_stackheap
+
+                 LDR     R0, =  Heap_Mem
+                 LDR     R1, =(Stack_Mem + Stack_Size)
+                 LDR     R2, = (Heap_Mem +  Heap_Size)
+                 LDR     R3, = Stack_Mem
+                 BX      LR
+
+                 ALIGN
+
+                 ENDIF
+
+                 END
+
+;************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE*****

bsp/stm32f10x_HAL/Libraries/CMSIS/Device/ST/STM32F1xx/Source/Templates/arm/startup_stm32f105xc.s

@@ -0,0 +1,381 @@
+;******************** (C) COPYRIGHT 2017 STMicroelectronics ********************
+;* File Name          : startup_stm32f105xc.s
+;* Author             : MCD Application Team
+;* Version            : V4.2.0
+;* Date               : 31-March-2017
+;* Description        : STM32F105xC Devices vector table for MDK-ARM toolchain. 
+;*                      This module performs:
+;*                      - Set the initial SP
+;*                      - Set the initial PC == Reset_Handler
+;*                      - Set the vector table entries with the exceptions ISR address
+;*                      - Configure the clock system
+;*                      - Branches to __main in the C library (which eventually
+;*                        calls main()).
+;*                      After Reset the Cortex-M3 processor is in Thread mode,
+;*                      priority is Privileged, and the Stack is set to Main.
+;********************************************************************************
+;*
+;* <h2><center>&copy; COPYRIGHT(c) 2017 STMicroelectronics</center></h2>
+;*
+;* Redistribution and use in source and binary forms, with or without modification,
+;* are permitted provided that the following conditions are met:
+;*   1. Redistributions of source code must retain the above copyright notice,
+;*      this list of conditions and the following disclaimer.
+;*   2. Redistributions in binary form must reproduce the above copyright notice,
+;*      this list of conditions and the following disclaimer in the documentation
+;*      and/or other materials provided with the distribution.
+;*   3. Neither the name of STMicroelectronics nor the names of its contributors
+;*      may be used to endorse or promote products derived from this software
+;*      without specific prior written permission.
+;*
+;* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+;* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+;* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+;* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+;* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+;* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+;* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+;* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+;* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+;* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+; 
+;*******************************************************************************
+
+; Amount of memory (in bytes) allocated for Stack
+; Tailor this value to your application needs
+; <h> Stack Configuration
+;   <o> Stack Size (in Bytes) <0x0-0xFFFFFFFF:8>
+; </h>
+
+Stack_Size      EQU     0x00000400
+
+                AREA    STACK, NOINIT, READWRITE, ALIGN=3
+Stack_Mem       SPACE   Stack_Size
+__initial_sp
+
+
+; <h> Heap Configuration
+;   <o>  Heap Size (in Bytes) <0x0-0xFFFFFFFF:8>
+; </h>
+
+Heap_Size       EQU     0x00000200
+
+                AREA    HEAP, NOINIT, READWRITE, ALIGN=3
+__heap_base
+Heap_Mem        SPACE   Heap_Size
+__heap_limit
+
+                PRESERVE8
+                THUMB
+
+
+; Vector Table Mapped to Address 0 at Reset
+                AREA    RESET, DATA, READONLY
+                EXPORT  __Vectors
+                EXPORT  __Vectors_End
+                EXPORT  __Vectors_Size
+
+__Vectors       DCD     __initial_sp               ; Top of Stack
+                DCD     Reset_Handler              ; Reset Handler
+                DCD     NMI_Handler                ; NMI Handler
+                DCD     HardFault_Handler          ; Hard Fault Handler
+                DCD     MemManage_Handler          ; MPU Fault Handler
+                DCD     BusFault_Handler           ; Bus Fault Handler
+                DCD     UsageFault_Handler         ; Usage Fault Handler
+                DCD     0                          ; Reserved
+                DCD     0                          ; Reserved
+                DCD     0                          ; Reserved
+                DCD     0                          ; Reserved
+                DCD     SVC_Handler                ; SVCall Handler
+                DCD     DebugMon_Handler           ; Debug Monitor Handler
+                DCD     0                          ; Reserved
+                DCD     PendSV_Handler             ; PendSV Handler
+                DCD     SysTick_Handler            ; SysTick Handler
+
+                ; External Interrupts
+                DCD     WWDG_IRQHandler            ; Window Watchdog
+                DCD     PVD_IRQHandler             ; PVD through EXTI Line detect
+                DCD     TAMPER_IRQHandler          ; Tamper
+                DCD     RTC_IRQHandler             ; RTC
+                DCD     FLASH_IRQHandler           ; Flash
+                DCD     RCC_IRQHandler             ; RCC
+                DCD     EXTI0_IRQHandler           ; EXTI Line 0
+                DCD     EXTI1_IRQHandler           ; EXTI Line 1
+                DCD     EXTI2_IRQHandler           ; EXTI Line 2
+                DCD     EXTI3_IRQHandler           ; EXTI Line 3
+                DCD     EXTI4_IRQHandler           ; EXTI Line 4
+                DCD     DMA1_Channel1_IRQHandler   ; DMA1 Channel 1
+                DCD     DMA1_Channel2_IRQHandler   ; DMA1 Channel 2
+                DCD     DMA1_Channel3_IRQHandler   ; DMA1 Channel 3
+                DCD     DMA1_Channel4_IRQHandler   ; DMA1 Channel 4
+                DCD     DMA1_Channel5_IRQHandler   ; DMA1 Channel 5
+                DCD     DMA1_Channel6_IRQHandler   ; DMA1 Channel 6
+                DCD     DMA1_Channel7_IRQHandler   ; DMA1 Channel 7
+                DCD     ADC1_2_IRQHandler          ; ADC1 and ADC2
+                DCD     CAN1_TX_IRQHandler         ; CAN1 TX
+                DCD     CAN1_RX0_IRQHandler        ; CAN1 RX0
+                DCD     CAN1_RX1_IRQHandler        ; CAN1 RX1
+                DCD     CAN1_SCE_IRQHandler        ; CAN1 SCE
+                DCD     EXTI9_5_IRQHandler         ; EXTI Line 9..5
+                DCD     TIM1_BRK_IRQHandler        ; TIM1 Break
+                DCD     TIM1_UP_IRQHandler         ; TIM1 Update
+                DCD     TIM1_TRG_COM_IRQHandler    ; TIM1 Trigger and Commutation
+                DCD     TIM1_CC_IRQHandler         ; TIM1 Capture Compare
+                DCD     TIM2_IRQHandler            ; TIM2
+                DCD     TIM3_IRQHandler            ; TIM3
+                DCD     TIM4_IRQHandler            ; TIM4
+                DCD     I2C1_EV_IRQHandler         ; I2C1 Event
+                DCD     I2C1_ER_IRQHandler         ; I2C1 Error
+                DCD     I2C2_EV_IRQHandler         ; I2C2 Event
+                DCD     I2C2_ER_IRQHandler         ; I2C1 Error
+                DCD     SPI1_IRQHandler            ; SPI1
+                DCD     SPI2_IRQHandler            ; SPI2
+                DCD     USART1_IRQHandler          ; USART1
+                DCD     USART2_IRQHandler          ; USART2
+                DCD     USART3_IRQHandler          ; USART3
+                DCD     EXTI15_10_IRQHandler       ; EXTI Line 15..10
+                DCD     RTC_Alarm_IRQHandler        ; RTC alarm through EXTI line
+                DCD     OTG_FS_WKUP_IRQHandler     ; USB OTG FS Wakeup through EXTI line
+                DCD     0                          ; Reserved
+                DCD     0                          ; Reserved
+                DCD     0                          ; Reserved
+                DCD     0                          ; Reserved
+                DCD     0                          ; Reserved
+                DCD     0                          ; Reserved
+                DCD     0                          ; Reserved
+                DCD     TIM5_IRQHandler            ; TIM5
+                DCD     SPI3_IRQHandler            ; SPI3
+                DCD     UART4_IRQHandler           ; UART4
+                DCD     UART5_IRQHandler           ; UART5
+                DCD     TIM6_IRQHandler            ; TIM6
+                DCD     TIM7_IRQHandler            ; TIM7
+                DCD     DMA2_Channel1_IRQHandler   ; DMA2 Channel1
+                DCD     DMA2_Channel2_IRQHandler   ; DMA2 Channel2
+                DCD     DMA2_Channel3_IRQHandler   ; DMA2 Channel3
+                DCD     DMA2_Channel4_IRQHandler   ; DMA2 Channel4
+                DCD     DMA2_Channel5_IRQHandler   ; DMA2 Channel5
+                DCD     0                          ; Reserved
+                DCD     0                          ; Reserved
+                DCD     CAN2_TX_IRQHandler         ; CAN2 TX
+                DCD     CAN2_RX0_IRQHandler        ; CAN2 RX0
+                DCD     CAN2_RX1_IRQHandler        ; CAN2 RX1
+                DCD     CAN2_SCE_IRQHandler        ; CAN2 SCE
+                DCD     OTG_FS_IRQHandler          ; USB OTG FS
+__Vectors_End
+
+__Vectors_Size  EQU  __Vectors_End - __Vectors
+
+                AREA    |.text|, CODE, READONLY
+
+; Reset handler
+Reset_Handler    PROC
+                 EXPORT  Reset_Handler             [WEAK]
+        IMPORT  SystemInit
+        IMPORT  __main
+                 LDR     R0, =SystemInit
+                 BLX     R0
+                 LDR     R0, =__main
+                 BX      R0
+                 ENDP
+
+; Dummy Exception Handlers (infinite loops which can be modified)
+
+NMI_Handler     PROC
+                EXPORT  NMI_Handler                [WEAK]
+                B       .
+                ENDP
+HardFault_Handler\
+                PROC
+                EXPORT  HardFault_Handler          [WEAK]
+                B       .
+                ENDP
+MemManage_Handler\
+                PROC
+                EXPORT  MemManage_Handler          [WEAK]
+                B       .
+                ENDP
+BusFault_Handler\
+                PROC
+                EXPORT  BusFault_Handler           [WEAK]
+                B       .
+                ENDP
+UsageFault_Handler\
+                PROC
+                EXPORT  UsageFault_Handler         [WEAK]
+                B       .
+                ENDP
+SVC_Handler     PROC
+                EXPORT  SVC_Handler                [WEAK]
+                B       .
+                ENDP
+DebugMon_Handler\
+                PROC
+                EXPORT  DebugMon_Handler           [WEAK]
+                B       .
+                ENDP
+PendSV_Handler  PROC
+                EXPORT  PendSV_Handler             [WEAK]
+                B       .
+                ENDP
+SysTick_Handler PROC
+                EXPORT  SysTick_Handler            [WEAK]
+                B       .
+                ENDP
+
+Default_Handler PROC
+
+                EXPORT  WWDG_IRQHandler            [WEAK]
+                EXPORT  PVD_IRQHandler             [WEAK]
+                EXPORT  TAMPER_IRQHandler          [WEAK]
+                EXPORT  RTC_IRQHandler             [WEAK]
+                EXPORT  FLASH_IRQHandler           [WEAK]
+                EXPORT  RCC_IRQHandler             [WEAK]
+                EXPORT  EXTI0_IRQHandler           [WEAK]
+                EXPORT  EXTI1_IRQHandler           [WEAK]
+                EXPORT  EXTI2_IRQHandler           [WEAK]
+                EXPORT  EXTI3_IRQHandler           [WEAK]
+                EXPORT  EXTI4_IRQHandler           [WEAK]
+                EXPORT  DMA1_Channel1_IRQHandler   [WEAK]
+                EXPORT  DMA1_Channel2_IRQHandler   [WEAK]
+                EXPORT  DMA1_Channel3_IRQHandler   [WEAK]
+                EXPORT  DMA1_Channel4_IRQHandler   [WEAK]
+                EXPORT  DMA1_Channel5_IRQHandler   [WEAK]
+                EXPORT  DMA1_Channel6_IRQHandler   [WEAK]
+                EXPORT  DMA1_Channel7_IRQHandler   [WEAK]
+                EXPORT  ADC1_2_IRQHandler          [WEAK]
+                EXPORT  CAN1_TX_IRQHandler         [WEAK]
+                EXPORT  CAN1_RX0_IRQHandler        [WEAK]
+                EXPORT  CAN1_RX1_IRQHandler        [WEAK]
+                EXPORT  CAN1_SCE_IRQHandler        [WEAK]
+                EXPORT  EXTI9_5_IRQHandler         [WEAK]
+                EXPORT  TIM1_BRK_IRQHandler        [WEAK]
+                EXPORT  TIM1_UP_IRQHandler         [WEAK]
+                EXPORT  TIM1_TRG_COM_IRQHandler    [WEAK]
+                EXPORT  TIM1_CC_IRQHandler         [WEAK]
+                EXPORT  TIM2_IRQHandler            [WEAK]
+                EXPORT  TIM3_IRQHandler            [WEAK]
+                EXPORT  TIM4_IRQHandler            [WEAK]
+                EXPORT  I2C1_EV_IRQHandler         [WEAK]
+                EXPORT  I2C1_ER_IRQHandler         [WEAK]
+                EXPORT  I2C2_EV_IRQHandler         [WEAK]
+                EXPORT  I2C2_ER_IRQHandler         [WEAK]
+                EXPORT  SPI1_IRQHandler            [WEAK]
+                EXPORT  SPI2_IRQHandler            [WEAK]
+                EXPORT  USART1_IRQHandler          [WEAK]
+                EXPORT  USART2_IRQHandler          [WEAK]
+                EXPORT  USART3_IRQHandler          [WEAK]
+                EXPORT  EXTI15_10_IRQHandler       [WEAK]
+                EXPORT  RTC_Alarm_IRQHandler        [WEAK]
+                EXPORT  OTG_FS_WKUP_IRQHandler     [WEAK]
+                EXPORT  TIM5_IRQHandler            [WEAK]
+                EXPORT  SPI3_IRQHandler            [WEAK]
+                EXPORT  UART4_IRQHandler           [WEAK]
+                EXPORT  UART5_IRQHandler           [WEAK]
+                EXPORT  TIM6_IRQHandler            [WEAK]
+                EXPORT  TIM7_IRQHandler            [WEAK]
+                EXPORT  DMA2_Channel1_IRQHandler   [WEAK]
+                EXPORT  DMA2_Channel2_IRQHandler   [WEAK]
+                EXPORT  DMA2_Channel3_IRQHandler   [WEAK]
+                EXPORT  DMA2_Channel4_IRQHandler   [WEAK]
+                EXPORT  DMA2_Channel5_IRQHandler   [WEAK]
+                EXPORT  CAN2_TX_IRQHandler         [WEAK]
+                EXPORT  CAN2_RX0_IRQHandler        [WEAK]
+                EXPORT  CAN2_RX1_IRQHandler        [WEAK]
+                EXPORT  CAN2_SCE_IRQHandler        [WEAK]
+                EXPORT  OTG_FS_IRQHandler          [WEAK]
+
+WWDG_IRQHandler
+PVD_IRQHandler
+TAMPER_IRQHandler
+RTC_IRQHandler
+FLASH_IRQHandler
+RCC_IRQHandler
+EXTI0_IRQHandler
+EXTI1_IRQHandler
+EXTI2_IRQHandler
+EXTI3_IRQHandler
+EXTI4_IRQHandler
+DMA1_Channel1_IRQHandler
+DMA1_Channel2_IRQHandler
+DMA1_Channel3_IRQHandler
+DMA1_Channel4_IRQHandler
+DMA1_Channel5_IRQHandler
+DMA1_Channel6_IRQHandler
+DMA1_Channel7_IRQHandler
+ADC1_2_IRQHandler
+CAN1_TX_IRQHandler
+CAN1_RX0_IRQHandler
+CAN1_RX1_IRQHandler
+CAN1_SCE_IRQHandler
+EXTI9_5_IRQHandler
+TIM1_BRK_IRQHandler
+TIM1_UP_IRQHandler
+TIM1_TRG_COM_IRQHandler
+TIM1_CC_IRQHandler
+TIM2_IRQHandler
+TIM3_IRQHandler
+TIM4_IRQHandler
+I2C1_EV_IRQHandler
+I2C1_ER_IRQHandler
+I2C2_EV_IRQHandler
+I2C2_ER_IRQHandler
+SPI1_IRQHandler
+SPI2_IRQHandler
+USART1_IRQHandler
+USART2_IRQHandler
+USART3_IRQHandler
+EXTI15_10_IRQHandler
+RTC_Alarm_IRQHandler
+OTG_FS_WKUP_IRQHandler
+TIM5_IRQHandler
+SPI3_IRQHandler
+UART4_IRQHandler
+UART5_IRQHandler
+TIM6_IRQHandler
+TIM7_IRQHandler
+DMA2_Channel1_IRQHandler
+DMA2_Channel2_IRQHandler
+DMA2_Channel3_IRQHandler
+DMA2_Channel4_IRQHandler
+DMA2_Channel5_IRQHandler
+CAN2_TX_IRQHandler
+CAN2_RX0_IRQHandler
+CAN2_RX1_IRQHandler
+CAN2_SCE_IRQHandler
+OTG_FS_IRQHandler
+
+                B       .
+
+                ENDP
+
+                ALIGN
+
+;*******************************************************************************
+; User Stack and Heap initialization
+;*******************************************************************************
+                 IF      :DEF:__MICROLIB
+                
+                 EXPORT  __initial_sp
+                 EXPORT  __heap_base
+                 EXPORT  __heap_limit
+                
+                 ELSE
+                
+                 IMPORT  __use_two_region_memory
+                 EXPORT  __user_initial_stackheap
+                 
+__user_initial_stackheap
+
+                 LDR     R0, =  Heap_Mem
+                 LDR     R1, =(Stack_Mem + Stack_Size)
+                 LDR     R2, = (Heap_Mem +  Heap_Size)
+                 LDR     R3, = Stack_Mem
+                 BX      LR
+
+                 ALIGN
+
+                 ENDIF
+
+                 END
+
+;************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE*****

bsp/stm32f10x_HAL/Libraries/CMSIS/Device/ST/STM32F1xx/Source/Templates/arm/startup_stm32f107xc.s

@@ -0,0 +1,385 @@
+;******************** (C) COPYRIGHT 2017 STMicroelectronics ********************
+;* File Name          : startup_stm32f107xc.s
+;* Author             : MCD Application Team
+;* Version            : V4.2.0
+;* Date               : 31-March-2017
+;* Description        : STM32F107xC Devices vector table for MDK-ARM toolchain. 
+;*                      This module performs:
+;*                      - Set the initial SP
+;*                      - Set the initial PC == Reset_Handler
+;*                      - Set the vector table entries with the exceptions ISR address
+;*                      - Configure the clock system
+;*                      - Branches to __main in the C library (which eventually
+;*                        calls main()).
+;*                      After Reset the Cortex-M3 processor is in Thread mode,
+;*                      priority is Privileged, and the Stack is set to Main.
+;********************************************************************************
+;*
+;* <h2><center>&copy; COPYRIGHT(c) 2017 STMicroelectronics</center></h2>
+;*
+;* Redistribution and use in source and binary forms, with or without modification,
+;* are permitted provided that the following conditions are met:
+;*   1. Redistributions of source code must retain the above copyright notice,
+;*      this list of conditions and the following disclaimer.
+;*   2. Redistributions in binary form must reproduce the above copyright notice,
+;*      this list of conditions and the following disclaimer in the documentation
+;*      and/or other materials provided with the distribution.
+;*   3. Neither the name of STMicroelectronics nor the names of its contributors
+;*      may be used to endorse or promote products derived from this software
+;*      without specific prior written permission.
+;*
+;* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+;* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+;* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+;* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+;* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+;* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+;* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+;* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+;* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+;* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+; 
+;*******************************************************************************
+
+; Amount of memory (in bytes) allocated for Stack
+; Tailor this value to your application needs
+; <h> Stack Configuration
+;   <o> Stack Size (in Bytes) <0x0-0xFFFFFFFF:8>
+; </h>
+
+Stack_Size      EQU     0x00000400
+
+                AREA    STACK, NOINIT, READWRITE, ALIGN=3
+Stack_Mem       SPACE   Stack_Size
+__initial_sp
+
+
+; <h> Heap Configuration
+;   <o>  Heap Size (in Bytes) <0x0-0xFFFFFFFF:8>
+; </h>
+
+Heap_Size       EQU     0x00000200
+
+                AREA    HEAP, NOINIT, READWRITE, ALIGN=3
+__heap_base
+Heap_Mem        SPACE   Heap_Size
+__heap_limit
+
+                PRESERVE8
+                THUMB
+
+
+; Vector Table Mapped to Address 0 at Reset
+                AREA    RESET, DATA, READONLY
+                EXPORT  __Vectors
+                EXPORT  __Vectors_End
+                EXPORT  __Vectors_Size
+
+__Vectors       DCD     __initial_sp               ; Top of Stack
+                DCD     Reset_Handler              ; Reset Handler
+                DCD     NMI_Handler                ; NMI Handler
+                DCD     HardFault_Handler          ; Hard Fault Handler
+                DCD     MemManage_Handler          ; MPU Fault Handler
+                DCD     BusFault_Handler           ; Bus Fault Handler
+                DCD     UsageFault_Handler         ; Usage Fault Handler
+                DCD     0                          ; Reserved
+                DCD     0                          ; Reserved
+                DCD     0                          ; Reserved
+                DCD     0                          ; Reserved
+                DCD     SVC_Handler                ; SVCall Handler
+                DCD     DebugMon_Handler           ; Debug Monitor Handler
+                DCD     0                          ; Reserved
+                DCD     PendSV_Handler             ; PendSV Handler
+                DCD     SysTick_Handler            ; SysTick Handler
+
+                ; External Interrupts
+                DCD     WWDG_IRQHandler            ; Window Watchdog
+                DCD     PVD_IRQHandler             ; PVD through EXTI Line detect
+                DCD     TAMPER_IRQHandler          ; Tamper
+                DCD     RTC_IRQHandler             ; RTC
+                DCD     FLASH_IRQHandler           ; Flash
+                DCD     RCC_IRQHandler             ; RCC
+                DCD     EXTI0_IRQHandler           ; EXTI Line 0
+                DCD     EXTI1_IRQHandler           ; EXTI Line 1
+                DCD     EXTI2_IRQHandler           ; EXTI Line 2
+                DCD     EXTI3_IRQHandler           ; EXTI Line 3
+                DCD     EXTI4_IRQHandler           ; EXTI Line 4
+                DCD     DMA1_Channel1_IRQHandler   ; DMA1 Channel 1
+                DCD     DMA1_Channel2_IRQHandler   ; DMA1 Channel 2
+                DCD     DMA1_Channel3_IRQHandler   ; DMA1 Channel 3
+                DCD     DMA1_Channel4_IRQHandler   ; DMA1 Channel 4
+                DCD     DMA1_Channel5_IRQHandler   ; DMA1 Channel 5
+                DCD     DMA1_Channel6_IRQHandler   ; DMA1 Channel 6
+                DCD     DMA1_Channel7_IRQHandler   ; DMA1 Channel 7
+                DCD     ADC1_2_IRQHandler          ; ADC1 and ADC2
+                DCD     CAN1_TX_IRQHandler         ; CAN1 TX
+                DCD     CAN1_RX0_IRQHandler        ; CAN1 RX0
+                DCD     CAN1_RX1_IRQHandler        ; CAN1 RX1
+                DCD     CAN1_SCE_IRQHandler        ; CAN1 SCE
+                DCD     EXTI9_5_IRQHandler         ; EXTI Line 9..5
+                DCD     TIM1_BRK_IRQHandler        ; TIM1 Break
+                DCD     TIM1_UP_IRQHandler         ; TIM1 Update
+                DCD     TIM1_TRG_COM_IRQHandler    ; TIM1 Trigger and Commutation
+                DCD     TIM1_CC_IRQHandler         ; TIM1 Capture Compare
+                DCD     TIM2_IRQHandler            ; TIM2
+                DCD     TIM3_IRQHandler            ; TIM3
+                DCD     TIM4_IRQHandler            ; TIM4
+                DCD     I2C1_EV_IRQHandler         ; I2C1 Event
+                DCD     I2C1_ER_IRQHandler         ; I2C1 Error
+                DCD     I2C2_EV_IRQHandler         ; I2C2 Event
+                DCD     I2C2_ER_IRQHandler         ; I2C1 Error
+                DCD     SPI1_IRQHandler            ; SPI1
+                DCD     SPI2_IRQHandler            ; SPI2
+                DCD     USART1_IRQHandler          ; USART1
+                DCD     USART2_IRQHandler          ; USART2
+                DCD     USART3_IRQHandler          ; USART3
+                DCD     EXTI15_10_IRQHandler       ; EXTI Line 15..10
+                DCD     RTC_Alarm_IRQHandler        ; RTC alarm through EXTI line
+                DCD     OTG_FS_WKUP_IRQHandler     ; USB OTG FS Wakeup through EXTI line
+                DCD     0                          ; Reserved
+                DCD     0                          ; Reserved
+                DCD     0                          ; Reserved
+                DCD     0                          ; Reserved
+                DCD     0                          ; Reserved
+                DCD     0                          ; Reserved
+                DCD     0                          ; Reserved
+                DCD     TIM5_IRQHandler            ; TIM5
+                DCD     SPI3_IRQHandler            ; SPI3
+                DCD     UART4_IRQHandler           ; UART4
+                DCD     UART5_IRQHandler           ; UART5
+                DCD     TIM6_IRQHandler            ; TIM6
+                DCD     TIM7_IRQHandler            ; TIM7
+                DCD     DMA2_Channel1_IRQHandler   ; DMA2 Channel1
+                DCD     DMA2_Channel2_IRQHandler   ; DMA2 Channel2
+                DCD     DMA2_Channel3_IRQHandler   ; DMA2 Channel3
+                DCD     DMA2_Channel4_IRQHandler   ; DMA2 Channel4
+                DCD     DMA2_Channel5_IRQHandler   ; DMA2 Channel5
+                DCD     ETH_IRQHandler             ; Ethernet
+                DCD     ETH_WKUP_IRQHandler        ; Ethernet Wakeup through EXTI line
+                DCD     CAN2_TX_IRQHandler         ; CAN2 TX
+                DCD     CAN2_RX0_IRQHandler        ; CAN2 RX0
+                DCD     CAN2_RX1_IRQHandler        ; CAN2 RX1
+                DCD     CAN2_SCE_IRQHandler        ; CAN2 SCE
+                DCD     OTG_FS_IRQHandler          ; USB OTG FS
+__Vectors_End
+
+__Vectors_Size  EQU  __Vectors_End - __Vectors
+
+                AREA    |.text|, CODE, READONLY
+
+; Reset handler
+Reset_Handler    PROC
+                 EXPORT  Reset_Handler             [WEAK]
+        IMPORT  SystemInit
+        IMPORT  __main
+                 LDR     R0, =SystemInit
+                 BLX     R0
+                 LDR     R0, =__main
+                 BX      R0
+                 ENDP
+
+; Dummy Exception Handlers (infinite loops which can be modified)
+
+NMI_Handler     PROC
+                EXPORT  NMI_Handler                [WEAK]
+                B       .
+                ENDP
+HardFault_Handler\
+                PROC
+                EXPORT  HardFault_Handler          [WEAK]
+                B       .
+                ENDP
+MemManage_Handler\
+                PROC
+                EXPORT  MemManage_Handler          [WEAK]
+                B       .
+                ENDP
+BusFault_Handler\
+                PROC
+                EXPORT  BusFault_Handler           [WEAK]
+                B       .
+                ENDP
+UsageFault_Handler\
+                PROC
+                EXPORT  UsageFault_Handler         [WEAK]
+                B       .
+                ENDP
+SVC_Handler     PROC
+                EXPORT  SVC_Handler                [WEAK]
+                B       .
+                ENDP
+DebugMon_Handler\
+                PROC
+                EXPORT  DebugMon_Handler           [WEAK]
+                B       .
+                ENDP
+PendSV_Handler  PROC
+                EXPORT  PendSV_Handler             [WEAK]
+                B       .
+                ENDP
+SysTick_Handler PROC
+                EXPORT  SysTick_Handler            [WEAK]
+                B       .
+                ENDP
+
+Default_Handler PROC
+
+                EXPORT  WWDG_IRQHandler            [WEAK]
+                EXPORT  PVD_IRQHandler             [WEAK]
+                EXPORT  TAMPER_IRQHandler          [WEAK]
+                EXPORT  RTC_IRQHandler             [WEAK]
+                EXPORT  FLASH_IRQHandler           [WEAK]
+                EXPORT  RCC_IRQHandler             [WEAK]
+                EXPORT  EXTI0_IRQHandler           [WEAK]
+                EXPORT  EXTI1_IRQHandler           [WEAK]
+                EXPORT  EXTI2_IRQHandler           [WEAK]
+                EXPORT  EXTI3_IRQHandler           [WEAK]
+                EXPORT  EXTI4_IRQHandler           [WEAK]
+                EXPORT  DMA1_Channel1_IRQHandler   [WEAK]
+                EXPORT  DMA1_Channel2_IRQHandler   [WEAK]
+                EXPORT  DMA1_Channel3_IRQHandler   [WEAK]
+                EXPORT  DMA1_Channel4_IRQHandler   [WEAK]
+                EXPORT  DMA1_Channel5_IRQHandler   [WEAK]
+                EXPORT  DMA1_Channel6_IRQHandler   [WEAK]
+                EXPORT  DMA1_Channel7_IRQHandler   [WEAK]
+                EXPORT  ADC1_2_IRQHandler          [WEAK]
+                EXPORT  CAN1_TX_IRQHandler         [WEAK]
+                EXPORT  CAN1_RX0_IRQHandler        [WEAK]
+                EXPORT  CAN1_RX1_IRQHandler        [WEAK]
+                EXPORT  CAN1_SCE_IRQHandler        [WEAK]
+                EXPORT  EXTI9_5_IRQHandler         [WEAK]
+                EXPORT  TIM1_BRK_IRQHandler        [WEAK]
+                EXPORT  TIM1_UP_IRQHandler         [WEAK]
+                EXPORT  TIM1_TRG_COM_IRQHandler    [WEAK]
+                EXPORT  TIM1_CC_IRQHandler         [WEAK]
+                EXPORT  TIM2_IRQHandler            [WEAK]
+                EXPORT  TIM3_IRQHandler            [WEAK]
+                EXPORT  TIM4_IRQHandler            [WEAK]
+                EXPORT  I2C1_EV_IRQHandler         [WEAK]
+                EXPORT  I2C1_ER_IRQHandler         [WEAK]
+                EXPORT  I2C2_EV_IRQHandler         [WEAK]
+                EXPORT  I2C2_ER_IRQHandler         [WEAK]
+                EXPORT  SPI1_IRQHandler            [WEAK]
+                EXPORT  SPI2_IRQHandler            [WEAK]
+                EXPORT  USART1_IRQHandler          [WEAK]
+                EXPORT  USART2_IRQHandler          [WEAK]
+                EXPORT  USART3_IRQHandler          [WEAK]
+                EXPORT  EXTI15_10_IRQHandler       [WEAK]
+                EXPORT  RTC_Alarm_IRQHandler        [WEAK]
+                EXPORT  OTG_FS_WKUP_IRQHandler     [WEAK]
+                EXPORT  TIM5_IRQHandler            [WEAK]
+                EXPORT  SPI3_IRQHandler            [WEAK]
+                EXPORT  UART4_IRQHandler           [WEAK]
+                EXPORT  UART5_IRQHandler           [WEAK]
+                EXPORT  TIM6_IRQHandler            [WEAK]
+                EXPORT  TIM7_IRQHandler            [WEAK]
+                EXPORT  DMA2_Channel1_IRQHandler   [WEAK]
+                EXPORT  DMA2_Channel2_IRQHandler   [WEAK]
+                EXPORT  DMA2_Channel3_IRQHandler   [WEAK]
+                EXPORT  DMA2_Channel4_IRQHandler   [WEAK]
+                EXPORT  DMA2_Channel5_IRQHandler   [WEAK]
+                EXPORT  ETH_IRQHandler             [WEAK]
+                EXPORT  ETH_WKUP_IRQHandler        [WEAK]
+                EXPORT  CAN2_TX_IRQHandler         [WEAK]
+                EXPORT  CAN2_RX0_IRQHandler        [WEAK]
+                EXPORT  CAN2_RX1_IRQHandler        [WEAK]
+                EXPORT  CAN2_SCE_IRQHandler        [WEAK]
+                EXPORT  OTG_FS_IRQHandler          [WEAK]
+
+WWDG_IRQHandler
+PVD_IRQHandler
+TAMPER_IRQHandler
+RTC_IRQHandler
+FLASH_IRQHandler
+RCC_IRQHandler
+EXTI0_IRQHandler
+EXTI1_IRQHandler
+EXTI2_IRQHandler
+EXTI3_IRQHandler
+EXTI4_IRQHandler
+DMA1_Channel1_IRQHandler
+DMA1_Channel2_IRQHandler
+DMA1_Channel3_IRQHandler
+DMA1_Channel4_IRQHandler
+DMA1_Channel5_IRQHandler
+DMA1_Channel6_IRQHandler
+DMA1_Channel7_IRQHandler
+ADC1_2_IRQHandler
+CAN1_TX_IRQHandler
+CAN1_RX0_IRQHandler
+CAN1_RX1_IRQHandler
+CAN1_SCE_IRQHandler
+EXTI9_5_IRQHandler
+TIM1_BRK_IRQHandler
+TIM1_UP_IRQHandler
+TIM1_TRG_COM_IRQHandler
+TIM1_CC_IRQHandler
+TIM2_IRQHandler
+TIM3_IRQHandler
+TIM4_IRQHandler
+I2C1_EV_IRQHandler
+I2C1_ER_IRQHandler
+I2C2_EV_IRQHandler
+I2C2_ER_IRQHandler
+SPI1_IRQHandler
+SPI2_IRQHandler
+USART1_IRQHandler
+USART2_IRQHandler
+USART3_IRQHandler
+EXTI15_10_IRQHandler
+RTC_Alarm_IRQHandler
+OTG_FS_WKUP_IRQHandler
+TIM5_IRQHandler
+SPI3_IRQHandler
+UART4_IRQHandler
+UART5_IRQHandler
+TIM6_IRQHandler
+TIM7_IRQHandler
+DMA2_Channel1_IRQHandler
+DMA2_Channel2_IRQHandler
+DMA2_Channel3_IRQHandler
+DMA2_Channel4_IRQHandler
+DMA2_Channel5_IRQHandler
+ETH_IRQHandler
+ETH_WKUP_IRQHandler
+CAN2_TX_IRQHandler
+CAN2_RX0_IRQHandler
+CAN2_RX1_IRQHandler
+CAN2_SCE_IRQHandler
+OTG_FS_IRQHandler
+
+                B       .
+
+                ENDP
+
+                ALIGN
+
+;*******************************************************************************
+; User Stack and Heap initialization
+;*******************************************************************************
+                 IF      :DEF:__MICROLIB
+                
+                 EXPORT  __initial_sp
+                 EXPORT  __heap_base
+                 EXPORT  __heap_limit
+                
+                 ELSE
+                
+                 IMPORT  __use_two_region_memory
+                 EXPORT  __user_initial_stackheap
+                 
+__user_initial_stackheap
+
+                 LDR     R0, =  Heap_Mem
+                 LDR     R1, =(Stack_Mem + Stack_Size)
+                 LDR     R2, = (Heap_Mem +  Heap_Size)
+                 LDR     R3, = Stack_Mem
+                 BX      LR
+
+                 ALIGN
+
+                 ENDIF
+
+                 END
+
+;************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE*****

bsp/stm32f10x_HAL/Libraries/CMSIS/Device/ST/STM32F1xx/Source/Templates/gcc/startup_stm32f100xb.s

@@ -0,0 +1,422 @@
+/**
+  *************** (C) COPYRIGHT 2017 STMicroelectronics ************************
+  * @file      startup_stm32f100xb.s
+  * @author    MCD Application Team
+  * @version   V4.2.0
+  * @date      31-March-2017
+  * @brief     STM32F100xB Devices vector table for Atollic toolchain.
+  *            This module performs:
+  *                - Set the initial SP
+  *                - Set the initial PC == Reset_Handler,
+  *                - Set the vector table entries with the exceptions ISR address
+  *                - Configure the clock system   
+  *                - Branches to main in the C library (which eventually
+  *                  calls main()).
+  *            After Reset the Cortex-M3 processor is in Thread mode,
+  *            priority is Privileged, and the Stack is set to Main.
+  ******************************************************************************
+  *
+  * <h2><center>&copy; COPYRIGHT(c) 2017 STMicroelectronics</center></h2>
+  *
+  * Redistribution and use in source and binary forms, with or without modification,
+  * are permitted provided that the following conditions are met:
+  *   1. Redistributions of source code must retain the above copyright notice,
+  *      this list of conditions and the following disclaimer.
+  *   2. Redistributions in binary form must reproduce the above copyright notice,
+  *      this list of conditions and the following disclaimer in the documentation
+  *      and/or other materials provided with the distribution.
+  *   3. Neither the name of STMicroelectronics nor the names of its contributors
+  *      may be used to endorse or promote products derived from this software
+  *      without specific prior written permission.
+  *
+  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+  * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+  * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+  * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+  * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+  * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+  * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+  *
+  ******************************************************************************
+  */
+
+  .syntax unified
+  .cpu cortex-m3
+  .fpu softvfp
+  .thumb
+
+.global g_pfnVectors
+.global Default_Handler
+
+/* start address for the initialization values of the .data section.
+defined in linker script */
+.word _sidata
+/* start address for the .data section. defined in linker script */
+.word _sdata
+/* end address for the .data section. defined in linker script */
+.word _edata
+/* start address for the .bss section. defined in linker script */
+.word _sbss
+/* end address for the .bss section. defined in linker script */
+.word _ebss
+
+.equ  BootRAM, 0xF108F85F
+/**
+ * @brief  This is the code that gets called when the processor first
+ *          starts execution following a reset event. Only the absolutely
+ *          necessary set is performed, after which the application
+ *          supplied main() routine is called.
+ * @param  None
+ * @retval : None
+*/
+
+  .section .text.Reset_Handler
+  .weak Reset_Handler
+  .type Reset_Handler, %function
+Reset_Handler:
+
+/* Copy the data segment initializers from flash to SRAM */
+  movs r1, #0
+  b LoopCopyDataInit
+
+CopyDataInit:
+  ldr r3, =_sidata
+  ldr r3, [r3, r1]
+  str r3, [r0, r1]
+  adds r1, r1, #4
+
+LoopCopyDataInit:
+  ldr r0, =_sdata
+  ldr r3, =_edata
+  adds r2, r0, r1
+  cmp r2, r3
+  bcc CopyDataInit
+  ldr r2, =_sbss
+  b LoopFillZerobss
+/* Zero fill the bss segment. */
+FillZerobss:
+  movs r3, #0
+  str r3, [r2], #4
+
+LoopFillZerobss:
+  ldr r3, = _ebss
+  cmp r2, r3
+  bcc FillZerobss
+
+/* Call the clock system intitialization function.*/
+    bl  SystemInit
+/* Call static constructors */
+    bl __libc_init_array
+/* Call the application's entry point.*/
+  bl main
+  bx lr
+.size Reset_Handler, .-Reset_Handler
+
+/**
+ * @brief  This is the code that gets called when the processor receives an
+ *         unexpected interrupt.  This simply enters an infinite loop, preserving
+ *         the system state for examination by a debugger.
+ *
+ * @param  None
+ * @retval : None
+*/
+    .section .text.Default_Handler,"ax",%progbits
+Default_Handler:
+Infinite_Loop:
+  b Infinite_Loop
+  .size Default_Handler, .-Default_Handler
+/******************************************************************************
+*
+* The minimal vector table for a Cortex M3.  Note that the proper constructs
+* must be placed on this to ensure that it ends up at physical address
+* 0x0000.0000.
+*
+******************************************************************************/
+  .section .isr_vector,"a",%progbits
+  .type g_pfnVectors, %object
+  .size g_pfnVectors, .-g_pfnVectors
+
+
+g_pfnVectors:
+  .word _estack
+  .word Reset_Handler
+  .word NMI_Handler
+  .word HardFault_Handler
+  .word MemManage_Handler
+  .word BusFault_Handler
+  .word UsageFault_Handler
+  .word 0
+  .word 0
+  .word 0
+  .word 0
+  .word SVC_Handler
+  .word DebugMon_Handler
+  .word 0
+  .word PendSV_Handler
+  .word SysTick_Handler
+  .word WWDG_IRQHandler
+  .word PVD_IRQHandler
+  .word TAMPER_IRQHandler
+  .word RTC_IRQHandler
+  .word FLASH_IRQHandler
+  .word RCC_IRQHandler
+  .word EXTI0_IRQHandler
+  .word EXTI1_IRQHandler
+  .word EXTI2_IRQHandler
+  .word EXTI3_IRQHandler
+  .word EXTI4_IRQHandler
+  .word DMA1_Channel1_IRQHandler
+  .word DMA1_Channel2_IRQHandler
+  .word DMA1_Channel3_IRQHandler
+  .word DMA1_Channel4_IRQHandler
+  .word DMA1_Channel5_IRQHandler
+  .word DMA1_Channel6_IRQHandler
+  .word DMA1_Channel7_IRQHandler
+  .word ADC1_IRQHandler
+  .word 0
+  .word 0
+  .word 0
+  .word 0
+  .word EXTI9_5_IRQHandler
+  .word TIM1_BRK_TIM15_IRQHandler
+  .word TIM1_UP_TIM16_IRQHandler
+  .word TIM1_TRG_COM_TIM17_IRQHandler
+  .word TIM1_CC_IRQHandler
+  .word TIM2_IRQHandler
+  .word TIM3_IRQHandler
+  .word TIM4_IRQHandler
+  .word I2C1_EV_IRQHandler
+  .word I2C1_ER_IRQHandler
+  .word I2C2_EV_IRQHandler
+  .word I2C2_ER_IRQHandler
+  .word SPI1_IRQHandler
+  .word SPI2_IRQHandler
+  .word USART1_IRQHandler
+  .word USART2_IRQHandler
+  .word USART3_IRQHandler
+  .word EXTI15_10_IRQHandler
+  .word RTC_Alarm_IRQHandler
+  .word CEC_IRQHandler
+  .word 0
+  .word 0
+  .word 0
+  .word 0
+  .word 0
+  .word 0
+  .word 0
+  .word 0
+  .word 0
+  .word 0
+  .word 0
+  .word TIM6_DAC_IRQHandler
+  .word TIM7_IRQHandler  
+  .word 0
+  .word 0
+  .word 0
+  .word 0
+  .word 0
+  .word 0
+  .word 0
+  .word 0
+  .word 0
+  .word 0
+  .word 0
+  .word 0
+  .word 0
+  .word 0
+  .word 0
+  .word 0
+  .word 0
+  .word 0
+  .word 0
+  .word 0
+  .word 0
+  .word 0
+  .word 0
+  .word 0
+  .word 0
+  .word 0
+  .word 0
+  .word 0
+  .word 0
+  .word 0
+  .word 0
+  .word 0
+  .word 0
+  .word 0
+  .word 0
+  .word 0
+  .word 0
+  .word 0
+  .word 0
+  .word 0
+  .word 0
+  .word 0
+  .word 0
+  .word BootRAM          /* @0x01CC. This is for boot in RAM mode for 
+                            STM32F10xB Value Line devices. */
+
+/*******************************************************************************
+*
+* Provide weak aliases for each Exception handler to the Default_Handler.
+* As they are weak aliases, any function with the same name will override
+* this definition.
+*
+*******************************************************************************/
+
+    
+  .weak  NMI_Handler
+  .thumb_set NMI_Handler,Default_Handler
+  
+  .weak  HardFault_Handler
+  .thumb_set HardFault_Handler,Default_Handler
+  
+  .weak  MemManage_Handler
+  .thumb_set MemManage_Handler,Default_Handler
+  
+  .weak  BusFault_Handler
+  .thumb_set BusFault_Handler,Default_Handler
+
+  .weak  UsageFault_Handler
+  .thumb_set UsageFault_Handler,Default_Handler
+
+  .weak  SVC_Handler
+  .thumb_set SVC_Handler,Default_Handler
+
+  .weak  DebugMon_Handler
+  .thumb_set DebugMon_Handler,Default_Handler
+
+  .weak  PendSV_Handler
+  .thumb_set PendSV_Handler,Default_Handler
+
+  .weak  SysTick_Handler
+  .thumb_set SysTick_Handler,Default_Handler
+
+  .weak  WWDG_IRQHandler
+  .thumb_set WWDG_IRQHandler,Default_Handler
+
+  .weak  PVD_IRQHandler
+  .thumb_set PVD_IRQHandler,Default_Handler
+
+  .weak  TAMPER_IRQHandler
+  .thumb_set TAMPER_IRQHandler,Default_Handler
+
+  .weak  RTC_IRQHandler
+  .thumb_set RTC_IRQHandler,Default_Handler
+
+  .weak  FLASH_IRQHandler
+  .thumb_set FLASH_IRQHandler,Default_Handler
+
+  .weak  RCC_IRQHandler
+  .thumb_set RCC_IRQHandler,Default_Handler
+
+  .weak  EXTI0_IRQHandler
+  .thumb_set EXTI0_IRQHandler,Default_Handler
+
+  .weak  EXTI1_IRQHandler
+  .thumb_set EXTI1_IRQHandler,Default_Handler
+
+  .weak  EXTI2_IRQHandler
+  .thumb_set EXTI2_IRQHandler,Default_Handler
+
+  .weak  EXTI3_IRQHandler
+  .thumb_set EXTI3_IRQHandler,Default_Handler
+
+  .weak  EXTI4_IRQHandler
+  .thumb_set EXTI4_IRQHandler,Default_Handler
+
+  .weak  DMA1_Channel1_IRQHandler
+  .thumb_set DMA1_Channel1_IRQHandler,Default_Handler
+
+  .weak  DMA1_Channel2_IRQHandler
+  .thumb_set DMA1_Channel2_IRQHandler,Default_Handler
+
+  .weak  DMA1_Channel3_IRQHandler
+  .thumb_set DMA1_Channel3_IRQHandler,Default_Handler
+
+  .weak  DMA1_Channel4_IRQHandler
+  .thumb_set DMA1_Channel4_IRQHandler,Default_Handler
+
+  .weak  DMA1_Channel5_IRQHandler
+  .thumb_set DMA1_Channel5_IRQHandler,Default_Handler
+
+  .weak  DMA1_Channel6_IRQHandler
+  .thumb_set DMA1_Channel6_IRQHandler,Default_Handler
+
+  .weak  DMA1_Channel7_IRQHandler
+  .thumb_set DMA1_Channel7_IRQHandler,Default_Handler
+
+  .weak  ADC1_IRQHandler
+  .thumb_set ADC1_IRQHandler,Default_Handler
+
+  .weak  EXTI9_5_IRQHandler
+  .thumb_set EXTI9_5_IRQHandler,Default_Handler
+
+  .weak  TIM1_BRK_TIM15_IRQHandler
+  .thumb_set TIM1_BRK_TIM15_IRQHandler,Default_Handler
+
+  .weak  TIM1_UP_TIM16_IRQHandler
+  .thumb_set TIM1_UP_TIM16_IRQHandler,Default_Handler
+
+  .weak  TIM1_TRG_COM_TIM17_IRQHandler
+  .thumb_set TIM1_TRG_COM_TIM17_IRQHandler,Default_Handler
+
+  .weak  TIM1_CC_IRQHandler
+  .thumb_set TIM1_CC_IRQHandler,Default_Handler
+
+  .weak  TIM2_IRQHandler
+  .thumb_set TIM2_IRQHandler,Default_Handler
+  
+  .weak  TIM3_IRQHandler
+  .thumb_set TIM3_IRQHandler,Default_Handler
+
+  .weak  TIM4_IRQHandler
+  .thumb_set TIM4_IRQHandler,Default_Handler
+
+  .weak  I2C1_EV_IRQHandler
+  .thumb_set I2C1_EV_IRQHandler,Default_Handler
+
+  .weak  I2C1_ER_IRQHandler
+  .thumb_set I2C1_ER_IRQHandler,Default_Handler
+  
+  .weak  I2C2_EV_IRQHandler
+  .thumb_set I2C1_EV_IRQHandler,Default_Handler
+
+  .weak  I2C2_ER_IRQHandler
+  .thumb_set I2C1_ER_IRQHandler,Default_Handler
+
+  .weak  SPI1_IRQHandler
+  .thumb_set SPI1_IRQHandler,Default_Handler
+  
+  .weak  SPI1_IRQHandler
+  .thumb_set SPI2_IRQHandler,Default_Handler
+
+  .weak  USART1_IRQHandler
+  .thumb_set USART1_IRQHandler,Default_Handler
+
+  .weak  USART2_IRQHandler
+  .thumb_set USART2_IRQHandler,Default_Handler
+  
+  .weak  USART3_IRQHandler
+  .thumb_set USART3_IRQHandler,Default_Handler
+
+  .weak  EXTI15_10_IRQHandler
+  .thumb_set EXTI15_10_IRQHandler,Default_Handler
+
+  .weak  RTC_Alarm_IRQHandler
+  .thumb_set RTC_Alarm_IRQHandler,Default_Handler
+
+  .weak  CEC_IRQHandler
+  .thumb_set CEC_IRQHandler,Default_Handler
+
+  .weak  TIM6_DAC_IRQHandler
+  .thumb_set TIM6_DAC_IRQHandler,Default_Handler
+
+  .weak  TIM7_IRQHandler
+  .thumb_set TIM7_IRQHandler,Default_Handler  
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
+

bsp/stm32f10x_HAL/Libraries/CMSIS/Device/ST/STM32F1xx/Source/Templates/gcc/startup_stm32f100xe.s

@@ -0,0 +1,464 @@
+/**
+  *************** (C) COPYRIGHT 2017 STMicroelectronics ************************
+  * @file      startup_stm32f100xe.s
+  * @author    MCD Application Team
+  * @version   V4.2.0
+  * @date      31-March-2017
+  * @brief     STM32F100xE Devices vector table for Atollic toolchain.
+  *            This module performs:
+  *                - Set the initial SP
+  *                - Set the initial PC == Reset_Handler,
+  *                - Set the vector table entries with the exceptions ISR address
+  *                - Configure the clock system   
+  *                - Branches to main in the C library (which eventually
+  *                  calls main()).
+  *            After Reset the Cortex-M3 processor is in Thread mode,
+  *            priority is Privileged, and the Stack is set to Main.
+  ******************************************************************************
+  *
+  * <h2><center>&copy; COPYRIGHT(c) 2017 STMicroelectronics</center></h2>
+  *
+  * Redistribution and use in source and binary forms, with or without modification,
+  * are permitted provided that the following conditions are met:
+  *   1. Redistributions of source code must retain the above copyright notice,
+  *      this list of conditions and the following disclaimer.
+  *   2. Redistributions in binary form must reproduce the above copyright notice,
+  *      this list of conditions and the following disclaimer in the documentation
+  *      and/or other materials provided with the distribution.
+  *   3. Neither the name of STMicroelectronics nor the names of its contributors
+  *      may be used to endorse or promote products derived from this software
+  *      without specific prior written permission.
+  *
+  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+  * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+  * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+  * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+  * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+  * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+  * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+  *
+  ******************************************************************************
+  */
+
+  .syntax unified
+  .cpu cortex-m3
+  .fpu softvfp
+  .thumb
+
+.global g_pfnVectors
+.global Default_Handler
+
+/* start address for the initialization values of the .data section.
+defined in linker script */
+.word _sidata
+/* start address for the .data section. defined in linker script */
+.word _sdata
+/* end address for the .data section. defined in linker script */
+.word _edata
+/* start address for the .bss section. defined in linker script */
+.word _sbss
+/* end address for the .bss section. defined in linker script */
+.word _ebss
+
+.equ  BootRAM, 0xF108F85F
+/**
+ * @brief  This is the code that gets called when the processor first
+ *          starts execution following a reset event. Only the absolutely
+ *          necessary set is performed, after which the application
+ *          supplied main() routine is called.
+ * @param  None
+ * @retval : None
+*/
+
+  .section .text.Reset_Handler
+  .weak Reset_Handler
+  .type Reset_Handler, %function
+Reset_Handler:
+
+/* Copy the data segment initializers from flash to SRAM */
+  movs r1, #0
+  b LoopCopyDataInit
+
+CopyDataInit:
+  ldr r3, =_sidata
+  ldr r3, [r3, r1]
+  str r3, [r0, r1]
+  adds r1, r1, #4
+
+LoopCopyDataInit:
+  ldr r0, =_sdata
+  ldr r3, =_edata
+  adds r2, r0, r1
+  cmp r2, r3
+  bcc CopyDataInit
+  ldr r2, =_sbss
+  b LoopFillZerobss
+/* Zero fill the bss segment. */
+FillZerobss:
+  movs r3, #0
+  str r3, [r2], #4
+
+LoopFillZerobss:
+  ldr r3, = _ebss
+  cmp r2, r3
+  bcc FillZerobss
+
+/* Call the clock system intitialization function.*/
+    bl  SystemInit
+/* Call static constructors */
+    bl __libc_init_array
+/* Call the application's entry point.*/
+  bl main
+  bx lr
+.size Reset_Handler, .-Reset_Handler
+
+/**
+ * @brief  This is the code that gets called when the processor receives an
+ *         unexpected interrupt.  This simply enters an infinite loop, preserving
+ *         the system state for examination by a debugger.
+ *
+ * @param  None
+ * @retval : None
+*/
+    .section .text.Default_Handler,"ax",%progbits
+Default_Handler:
+Infinite_Loop:
+  b Infinite_Loop
+  .size Default_Handler, .-Default_Handler
+/******************************************************************************
+*
+* The minimal vector table for a Cortex M3.  Note that the proper constructs
+* must be placed on this to ensure that it ends up at physical address
+* 0x0000.0000.
+*
+******************************************************************************/
+  .section .isr_vector,"a",%progbits
+  .type g_pfnVectors, %object
+  .size g_pfnVectors, .-g_pfnVectors
+
+
+g_pfnVectors:
+
+  .word _estack
+  .word Reset_Handler
+  .word NMI_Handler
+  .word HardFault_Handler
+  .word MemManage_Handler
+  .word BusFault_Handler
+  .word UsageFault_Handler
+  .word 0
+  .word 0
+  .word 0
+  .word 0
+  .word SVC_Handler
+  .word DebugMon_Handler
+  .word 0
+  .word PendSV_Handler
+  .word SysTick_Handler
+  .word WWDG_IRQHandler
+  .word PVD_IRQHandler
+  .word TAMPER_IRQHandler
+  .word RTC_IRQHandler
+  .word FLASH_IRQHandler
+  .word RCC_IRQHandler
+  .word EXTI0_IRQHandler
+  .word EXTI1_IRQHandler
+  .word EXTI2_IRQHandler
+  .word EXTI3_IRQHandler
+  .word EXTI4_IRQHandler
+  .word DMA1_Channel1_IRQHandler
+  .word DMA1_Channel2_IRQHandler
+  .word DMA1_Channel3_IRQHandler
+  .word DMA1_Channel4_IRQHandler
+  .word DMA1_Channel5_IRQHandler
+  .word DMA1_Channel6_IRQHandler
+  .word DMA1_Channel7_IRQHandler
+  .word ADC1_IRQHandler
+  .word 0
+  .word 0
+  .word 0
+  .word 0
+  .word EXTI9_5_IRQHandler
+  .word TIM1_BRK_TIM15_IRQHandler
+  .word TIM1_UP_TIM16_IRQHandler
+  .word TIM1_TRG_COM_TIM17_IRQHandler
+  .word TIM1_CC_IRQHandler
+  .word TIM2_IRQHandler
+  .word TIM3_IRQHandler
+  .word TIM4_IRQHandler
+  .word I2C1_EV_IRQHandler
+  .word I2C1_ER_IRQHandler
+  .word I2C2_EV_IRQHandler
+  .word I2C2_ER_IRQHandler
+  .word SPI1_IRQHandler
+  .word SPI2_IRQHandler
+  .word USART1_IRQHandler
+  .word USART2_IRQHandler
+  .word USART3_IRQHandler
+  .word EXTI15_10_IRQHandler
+  .word RTC_Alarm_IRQHandler
+  .word CEC_IRQHandler
+  .word TIM12_IRQHandler
+  .word TIM13_IRQHandler
+  .word TIM14_IRQHandler
+  .word 0
+  .word 0
+  .word 0
+  .word 0
+  .word TIM5_IRQHandler
+  .word SPI3_IRQHandler
+  .word UART4_IRQHandler
+  .word UART5_IRQHandler
+  .word TIM6_DAC_IRQHandler
+  .word TIM7_IRQHandler  
+  .word DMA2_Channel1_IRQHandler
+  .word DMA2_Channel2_IRQHandler
+  .word DMA2_Channel3_IRQHandler
+  .word DMA2_Channel4_5_IRQHandler
+  .word DMA2_Channel5_IRQHandler
+  .word 0
+  .word 0
+  .word 0
+  .word 0
+  .word 0
+  .word 0
+  .word 0
+  .word 0
+  .word 0
+  .word 0
+  .word 0
+  .word 0
+  .word 0
+  .word 0
+  .word 0
+  .word 0
+  .word 0
+  .word 0
+  .word 0
+  .word 0
+  .word 0
+  .word 0
+  .word 0
+  .word 0
+  .word 0
+  .word 0
+  .word 0
+  .word 0
+  .word 0
+  .word 0
+  .word 0
+  .word 0
+  .word 0
+  .word 0
+  .word 0
+  .word 0
+  .word 0
+  .word 0
+  .word 0
+  .word 0
+  .word 0
+  .word 0
+  .word 0
+  .word  BootRAM       /* @0x1E0. This is for boot in RAM mode for 
+                         STM32F10x High Density Value line devices. */
+
+/*******************************************************************************
+*
+* Provide weak aliases for each Exception handler to the Default_Handler.
+* As they are weak aliases, any function with the same name will override
+* this definition.
+*
+*******************************************************************************/
+
+    
+  .weak  NMI_Handler
+  .thumb_set NMI_Handler,Default_Handler
+  
+  .weak  HardFault_Handler
+  .thumb_set HardFault_Handler,Default_Handler
+  
+  .weak  MemManage_Handler
+  .thumb_set MemManage_Handler,Default_Handler
+  
+  .weak  BusFault_Handler
+  .thumb_set BusFault_Handler,Default_Handler
+
+  .weak  UsageFault_Handler
+  .thumb_set UsageFault_Handler,Default_Handler
+
+  .weak  SVC_Handler
+  .thumb_set SVC_Handler,Default_Handler
+
+  .weak  DebugMon_Handler
+  .thumb_set DebugMon_Handler,Default_Handler
+
+  .weak  PendSV_Handler
+  .thumb_set PendSV_Handler,Default_Handler
+
+  .weak  SysTick_Handler
+  .thumb_set SysTick_Handler,Default_Handler
+
+  .weak  WWDG_IRQHandler
+  .thumb_set WWDG_IRQHandler,Default_Handler
+
+  .weak  PVD_IRQHandler
+  .thumb_set PVD_IRQHandler,Default_Handler
+
+  .weak  TAMPER_IRQHandler
+  .thumb_set TAMPER_IRQHandler,Default_Handler
+
+  .weak  RTC_IRQHandler
+  .thumb_set RTC_IRQHandler,Default_Handler
+
+  .weak  FLASH_IRQHandler
+  .thumb_set FLASH_IRQHandler,Default_Handler
+
+  .weak  RCC_IRQHandler
+  .thumb_set RCC_IRQHandler,Default_Handler
+
+  .weak  EXTI0_IRQHandler
+  .thumb_set EXTI0_IRQHandler,Default_Handler
+
+  .weak  EXTI1_IRQHandler
+  .thumb_set EXTI1_IRQHandler,Default_Handler
+
+  .weak  EXTI2_IRQHandler
+  .thumb_set EXTI2_IRQHandler,Default_Handler
+
+  .weak  EXTI3_IRQHandler
+  .thumb_set EXTI3_IRQHandler,Default_Handler
+
+  .weak  EXTI4_IRQHandler
+  .thumb_set EXTI4_IRQHandler,Default_Handler
+
+  .weak  DMA1_Channel1_IRQHandler
+  .thumb_set DMA1_Channel1_IRQHandler,Default_Handler
+
+  .weak  DMA1_Channel2_IRQHandler
+  .thumb_set DMA1_Channel2_IRQHandler,Default_Handler
+
+  .weak  DMA1_Channel3_IRQHandler
+  .thumb_set DMA1_Channel3_IRQHandler,Default_Handler
+
+  .weak  DMA1_Channel4_IRQHandler
+  .thumb_set DMA1_Channel4_IRQHandler,Default_Handler
+
+  .weak  DMA1_Channel5_IRQHandler
+  .thumb_set DMA1_Channel5_IRQHandler,Default_Handler
+
+  .weak  DMA1_Channel6_IRQHandler
+  .thumb_set DMA1_Channel6_IRQHandler,Default_Handler
+
+  .weak  DMA1_Channel7_IRQHandler
+  .thumb_set DMA1_Channel7_IRQHandler,Default_Handler
+
+  .weak  ADC1_IRQHandler
+  .thumb_set ADC1_IRQHandler,Default_Handler
+
+  .weak  EXTI9_5_IRQHandler
+  .thumb_set EXTI9_5_IRQHandler,Default_Handler
+
+  .weak  TIM1_BRK_TIM15_IRQHandler
+  .thumb_set TIM1_BRK_TIM15_IRQHandler,Default_Handler
+
+  .weak  TIM1_UP_TIM16_IRQHandler
+  .thumb_set TIM1_UP_TIM16_IRQHandler,Default_Handler
+
+  .weak  TIM1_TRG_COM_TIM17_IRQHandler
+  .thumb_set TIM1_TRG_COM_TIM17_IRQHandler,Default_Handler
+
+  .weak  TIM1_CC_IRQHandler
+  .thumb_set TIM1_CC_IRQHandler,Default_Handler
+
+  .weak  TIM2_IRQHandler
+  .thumb_set TIM2_IRQHandler,Default_Handler
+
+  .weak  TIM3_IRQHandler
+  .thumb_set TIM3_IRQHandler,Default_Handler
+
+  .weak  TIM4_IRQHandler
+  .thumb_set TIM4_IRQHandler,Default_Handler
+
+  .weak  I2C1_EV_IRQHandler
+  .thumb_set I2C1_EV_IRQHandler,Default_Handler
+
+  .weak  I2C1_ER_IRQHandler
+  .thumb_set I2C1_ER_IRQHandler,Default_Handler
+
+  .weak  I2C2_EV_IRQHandler
+  .thumb_set I2C2_EV_IRQHandler,Default_Handler
+
+  .weak  I2C2_ER_IRQHandler
+  .thumb_set I2C2_ER_IRQHandler,Default_Handler
+
+  .weak  SPI1_IRQHandler
+  .thumb_set SPI1_IRQHandler,Default_Handler
+
+  .weak  SPI2_IRQHandler
+  .thumb_set SPI2_IRQHandler,Default_Handler
+
+  .weak  USART1_IRQHandler
+  .thumb_set USART1_IRQHandler,Default_Handler
+
+  .weak  USART2_IRQHandler
+  .thumb_set USART2_IRQHandler,Default_Handler
+
+  .weak  USART3_IRQHandler
+  .thumb_set USART3_IRQHandler,Default_Handler
+
+  .weak  EXTI15_10_IRQHandler
+  .thumb_set EXTI15_10_IRQHandler,Default_Handler
+
+  .weak  RTC_Alarm_IRQHandler
+  .thumb_set RTC_Alarm_IRQHandler,Default_Handler
+
+  .weak  CEC_IRQHandler
+  .thumb_set CEC_IRQHandler,Default_Handler
+
+  .weak  TIM12_IRQHandler
+  .thumb_set TIM12_IRQHandler,Default_Handler
+
+  .weak  TIM13_IRQHandler
+  .thumb_set TIM13_IRQHandler,Default_Handler
+
+  .weak  TIM14_IRQHandler
+  .thumb_set TIM14_IRQHandler,Default_Handler
+
+  .weak  TIM5_IRQHandler
+  .thumb_set TIM5_IRQHandler,Default_Handler
+
+  .weak  SPI3_IRQHandler
+  .thumb_set SPI3_IRQHandler,Default_Handler
+
+  .weak  UART4_IRQHandler
+  .thumb_set UART4_IRQHandler,Default_Handler
+
+  .weak  UART5_IRQHandler
+  .thumb_set UART5_IRQHandler,Default_Handler
+  
+  .weak  TIM6_DAC_IRQHandler
+  .thumb_set TIM6_DAC_IRQHandler,Default_Handler
+
+  .weak  TIM7_IRQHandler
+  .thumb_set TIM7_IRQHandler,Default_Handler 
+
+  .weak  DMA2_Channel1_IRQHandler
+  .thumb_set DMA2_Channel1_IRQHandler,Default_Handler
+
+  .weak  DMA2_Channel2_IRQHandler
+  .thumb_set DMA2_Channel2_IRQHandler,Default_Handler
+
+  .weak  DMA2_Channel3_IRQHandler
+  .thumb_set DMA2_Channel3_IRQHandler,Default_Handler
+
+  .weak  DMA2_Channel4_5_IRQHandler
+  .thumb_set DMA2_Channel4_5_IRQHandler,Default_Handler  
+
+  .weak  DMA2_Channel5_IRQHandler
+  .thumb_set DMA2_Channel5_IRQHandler,Default_Handler
+  
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
+

bsp/stm32f10x_HAL/Libraries/CMSIS/Device/ST/STM32F1xx/Source/Templates/gcc/startup_stm32f101x6.s

@@ -0,0 +1,337 @@
+/**
+  *************** (C) COPYRIGHT 2017 STMicroelectronics ************************
+  * @file      startup_stm32f101x6.s
+  * @author    MCD Application Team
+  * @version   V4.2.0
+  * @date      31-March-2017
+  * @brief     STM32F101x6 Devices vector table for Atollic toolchain.
+  *            This module performs:
+  *                - Set the initial SP
+  *                - Set the initial PC == Reset_Handler,
+  *                - Set the vector table entries with the exceptions ISR address
+  *                - Configure the clock system   
+  *                - Branches to main in the C library (which eventually
+  *                  calls main()).
+  *            After Reset the Cortex-M3 processor is in Thread mode,
+  *            priority is Privileged, and the Stack is set to Main.
+  ******************************************************************************
+  *
+  * <h2><center>&copy; COPYRIGHT(c) 2017 STMicroelectronics</center></h2>
+  *
+  * Redistribution and use in source and binary forms, with or without modification,
+  * are permitted provided that the following conditions are met:
+  *   1. Redistributions of source code must retain the above copyright notice,
+  *      this list of conditions and the following disclaimer.
+  *   2. Redistributions in binary form must reproduce the above copyright notice,
+  *      this list of conditions and the following disclaimer in the documentation
+  *      and/or other materials provided with the distribution.
+  *   3. Neither the name of STMicroelectronics nor the names of its contributors
+  *      may be used to endorse or promote products derived from this software
+  *      without specific prior written permission.
+  *
+  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+  * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+  * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+  * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+  * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+  * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+  * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+  *
+  ******************************************************************************
+  */
+
+  .syntax unified
+  .cpu cortex-m3
+  .fpu softvfp
+  .thumb
+
+.global g_pfnVectors
+.global Default_Handler
+
+/* start address for the initialization values of the .data section.
+defined in linker script */
+.word _sidata
+/* start address for the .data section. defined in linker script */
+.word _sdata
+/* end address for the .data section. defined in linker script */
+.word _edata
+/* start address for the .bss section. defined in linker script */
+.word _sbss
+/* end address for the .bss section. defined in linker script */
+.word _ebss
+
+.equ  BootRAM, 0xF108F85F
+/**
+ * @brief  This is the code that gets called when the processor first
+ *          starts execution following a reset event. Only the absolutely
+ *          necessary set is performed, after which the application
+ *          supplied main() routine is called.
+ * @param  None
+ * @retval : None
+*/
+
+  .section .text.Reset_Handler
+  .weak Reset_Handler
+  .type Reset_Handler, %function
+Reset_Handler:
+
+/* Copy the data segment initializers from flash to SRAM */
+  movs r1, #0
+  b LoopCopyDataInit
+
+CopyDataInit:
+  ldr r3, =_sidata
+  ldr r3, [r3, r1]
+  str r3, [r0, r1]
+  adds r1, r1, #4
+
+LoopCopyDataInit:
+  ldr r0, =_sdata
+  ldr r3, =_edata
+  adds r2, r0, r1
+  cmp r2, r3
+  bcc CopyDataInit
+  ldr r2, =_sbss
+  b LoopFillZerobss
+/* Zero fill the bss segment. */
+FillZerobss:
+  movs r3, #0
+  str r3, [r2], #4
+
+LoopFillZerobss:
+  ldr r3, = _ebss
+  cmp r2, r3
+  bcc FillZerobss
+
+/* Call the clock system intitialization function.*/
+    bl  SystemInit
+/* Call static constructors */
+    bl __libc_init_array
+/* Call the application's entry point.*/
+  bl main
+  bx lr
+.size Reset_Handler, .-Reset_Handler
+
+/**
+ * @brief  This is the code that gets called when the processor receives an
+ *         unexpected interrupt.  This simply enters an infinite loop, preserving
+ *         the system state for examination by a debugger.
+ *
+ * @param  None
+ * @retval : None
+*/
+    .section .text.Default_Handler,"ax",%progbits
+Default_Handler:
+Infinite_Loop:
+  b Infinite_Loop
+  .size Default_Handler, .-Default_Handler
+/******************************************************************************
+*
+* The minimal vector table for a Cortex M3.  Note that the proper constructs
+* must be placed on this to ensure that it ends up at physical address
+* 0x0000.0000.
+*
+******************************************************************************/
+  .section .isr_vector,"a",%progbits
+  .type g_pfnVectors, %object
+  .size g_pfnVectors, .-g_pfnVectors
+
+
+g_pfnVectors:
+
+
+  .word _estack
+  .word Reset_Handler
+  .word NMI_Handler
+  .word HardFault_Handler
+  .word MemManage_Handler
+  .word BusFault_Handler
+  .word UsageFault_Handler
+  .word 0
+  .word 0
+  .word 0
+  .word 0
+  .word SVC_Handler
+  .word DebugMon_Handler
+  .word 0
+  .word PendSV_Handler
+  .word SysTick_Handler
+  .word WWDG_IRQHandler
+  .word PVD_IRQHandler
+  .word TAMPER_IRQHandler
+  .word RTC_IRQHandler
+  .word FLASH_IRQHandler
+  .word RCC_IRQHandler
+  .word EXTI0_IRQHandler
+  .word EXTI1_IRQHandler
+  .word EXTI2_IRQHandler
+  .word EXTI3_IRQHandler
+  .word EXTI4_IRQHandler
+  .word DMA1_Channel1_IRQHandler
+  .word DMA1_Channel2_IRQHandler
+  .word DMA1_Channel3_IRQHandler
+  .word DMA1_Channel4_IRQHandler
+  .word DMA1_Channel5_IRQHandler
+  .word DMA1_Channel6_IRQHandler
+  .word DMA1_Channel7_IRQHandler
+  .word ADC1_IRQHandler
+  .word 0
+  .word 0
+  .word 0
+  .word 0
+  .word EXTI9_5_IRQHandler
+  .word 0
+  .word 0
+  .word 0
+  .word 0
+  .word TIM2_IRQHandler
+  .word TIM3_IRQHandler
+  .word 0
+  .word I2C1_EV_IRQHandler
+  .word I2C1_ER_IRQHandler
+  .word 0
+  .word 0
+  .word SPI1_IRQHandler
+  .word 0
+  .word USART1_IRQHandler
+  .word USART2_IRQHandler
+  .word 0
+  .word EXTI15_10_IRQHandler
+  .word RTC_Alarm_IRQHandler
+  .word 0
+  .word 0
+  .word 0
+  .word 0
+  .word 0
+  .word 0
+  .word 0
+  .word 0
+  .word BootRAM        /* @0x108. This is for boot in RAM mode for
+                          STM32F10x Low Density devices.*/
+
+/*******************************************************************************
+*
+* Provide weak aliases for each Exception handler to the Default_Handler.
+* As they are weak aliases, any function with the same name will override
+* this definition.
+*
+*******************************************************************************/
+
+  .weak  NMI_Handler
+  .thumb_set NMI_Handler,Default_Handler
+
+  .weak  HardFault_Handler
+  .thumb_set HardFault_Handler,Default_Handler
+
+  .weak  MemManage_Handler
+  .thumb_set MemManage_Handler,Default_Handler
+
+  .weak  BusFault_Handler
+  .thumb_set BusFault_Handler,Default_Handler
+
+  .weak  UsageFault_Handler
+  .thumb_set UsageFault_Handler,Default_Handler
+
+  .weak  SVC_Handler
+  .thumb_set SVC_Handler,Default_Handler
+
+  .weak  DebugMon_Handler
+  .thumb_set DebugMon_Handler,Default_Handler
+
+  .weak  PendSV_Handler
+  .thumb_set PendSV_Handler,Default_Handler
+
+  .weak  SysTick_Handler
+  .thumb_set SysTick_Handler,Default_Handler
+
+  .weak  WWDG_IRQHandler
+  .thumb_set WWDG_IRQHandler,Default_Handler
+
+  .weak  PVD_IRQHandler
+  .thumb_set PVD_IRQHandler,Default_Handler
+
+  .weak  TAMPER_IRQHandler
+  .thumb_set TAMPER_IRQHandler,Default_Handler
+
+  .weak  RTC_IRQHandler
+  .thumb_set RTC_IRQHandler,Default_Handler
+
+  .weak  FLASH_IRQHandler
+  .thumb_set FLASH_IRQHandler,Default_Handler
+
+  .weak  RCC_IRQHandler
+  .thumb_set RCC_IRQHandler,Default_Handler
+
+  .weak  EXTI0_IRQHandler
+  .thumb_set EXTI0_IRQHandler,Default_Handler
+
+  .weak  EXTI1_IRQHandler
+  .thumb_set EXTI1_IRQHandler,Default_Handler
+
+  .weak  EXTI2_IRQHandler
+  .thumb_set EXTI2_IRQHandler,Default_Handler
+
+  .weak  EXTI3_IRQHandler
+  .thumb_set EXTI3_IRQHandler,Default_Handler
+
+  .weak  EXTI4_IRQHandler
+  .thumb_set EXTI4_IRQHandler,Default_Handler
+
+  .weak  DMA1_Channel1_IRQHandler
+  .thumb_set DMA1_Channel1_IRQHandler,Default_Handler
+
+  .weak  DMA1_Channel2_IRQHandler
+  .thumb_set DMA1_Channel2_IRQHandler,Default_Handler
+
+  .weak  DMA1_Channel3_IRQHandler
+  .thumb_set DMA1_Channel3_IRQHandler,Default_Handler
+
+  .weak  DMA1_Channel4_IRQHandler
+  .thumb_set DMA1_Channel4_IRQHandler,Default_Handler
+
+  .weak  DMA1_Channel5_IRQHandler
+  .thumb_set DMA1_Channel5_IRQHandler,Default_Handler
+
+  .weak  DMA1_Channel6_IRQHandler
+  .thumb_set DMA1_Channel6_IRQHandler,Default_Handler
+
+  .weak  DMA1_Channel7_IRQHandler
+  .thumb_set DMA1_Channel7_IRQHandler,Default_Handler
+
+  .weak  ADC1_IRQHandler
+  .thumb_set ADC1_IRQHandler,Default_Handler
+
+  .weak  EXTI9_5_IRQHandler
+  .thumb_set EXTI9_5_IRQHandler,Default_Handler
+
+  .weak  TIM2_IRQHandler
+  .thumb_set TIM2_IRQHandler,Default_Handler
+
+  .weak  TIM3_IRQHandler
+  .thumb_set TIM3_IRQHandler,Default_Handler
+
+  .weak  I2C1_EV_IRQHandler
+  .thumb_set I2C1_EV_IRQHandler,Default_Handler
+
+  .weak  I2C1_ER_IRQHandler
+  .thumb_set I2C1_ER_IRQHandler,Default_Handler
+
+  .weak  SPI1_IRQHandler
+  .thumb_set SPI1_IRQHandler,Default_Handler
+
+  .weak  USART1_IRQHandler
+  .thumb_set USART1_IRQHandler,Default_Handler
+
+  .weak  USART2_IRQHandler
+  .thumb_set USART2_IRQHandler,Default_Handler
+
+  .weak  EXTI15_10_IRQHandler
+  .thumb_set EXTI15_10_IRQHandler,Default_Handler
+
+  .weak  RTC_Alarm_IRQHandler
+  .thumb_set RTC_Alarm_IRQHandler,Default_Handler
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

bsp/stm32f10x_HAL/Libraries/CMSIS/Device/ST/STM32F1xx/Source/Templates/gcc/startup_stm32f101xb.s

@@ -0,0 +1,353 @@
+/**
+  *************** (C) COPYRIGHT 2017 STMicroelectronics ************************
+  * @file      startup_stm32f101xb.s
+  * @author    MCD Application Team
+  * @version   V4.2.0
+  * @date      31-March-2017
+  * @brief     STM32F101xB Devices vector table for Atollic toolchain.
+  *            This module performs:
+  *                - Set the initial SP
+  *                - Set the initial PC == Reset_Handler,
+  *                - Set the vector table entries with the exceptions ISR address
+  *                - Configure the clock system   
+  *                - Branches to main in the C library (which eventually
+  *                  calls main()).
+  *            After Reset the Cortex-M3 processor is in Thread mode,
+  *            priority is Privileged, and the Stack is set to Main.
+  ******************************************************************************
+  *
+  * <h2><center>&copy; COPYRIGHT(c) 2017 STMicroelectronics</center></h2>
+  *
+  * Redistribution and use in source and binary forms, with or without modification,
+  * are permitted provided that the following conditions are met:
+  *   1. Redistributions of source code must retain the above copyright notice,
+  *      this list of conditions and the following disclaimer.
+  *   2. Redistributions in binary form must reproduce the above copyright notice,
+  *      this list of conditions and the following disclaimer in the documentation
+  *      and/or other materials provided with the distribution.
+  *   3. Neither the name of STMicroelectronics nor the names of its contributors
+  *      may be used to endorse or promote products derived from this software
+  *      without specific prior written permission.
+  *
+  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+  * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+  * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+  * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+  * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+  * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+  * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+  *
+  ******************************************************************************
+  */
+
+  .syntax unified
+  .cpu cortex-m3
+  .fpu softvfp
+  .thumb
+
+.global g_pfnVectors
+.global Default_Handler
+
+/* start address for the initialization values of the .data section.
+defined in linker script */
+.word _sidata
+/* start address for the .data section. defined in linker script */
+.word _sdata
+/* end address for the .data section. defined in linker script */
+.word _edata
+/* start address for the .bss section. defined in linker script */
+.word _sbss
+/* end address for the .bss section. defined in linker script */
+.word _ebss
+
+.equ  BootRAM, 0xF108F85F
+/**
+ * @brief  This is the code that gets called when the processor first
+ *          starts execution following a reset event. Only the absolutely
+ *          necessary set is performed, after which the application
+ *          supplied main() routine is called.
+ * @param  None
+ * @retval : None
+*/
+
+  .section .text.Reset_Handler
+  .weak Reset_Handler
+  .type Reset_Handler, %function
+Reset_Handler:
+
+/* Copy the data segment initializers from flash to SRAM */
+  movs r1, #0
+  b LoopCopyDataInit
+
+CopyDataInit:
+  ldr r3, =_sidata
+  ldr r3, [r3, r1]
+  str r3, [r0, r1]
+  adds r1, r1, #4
+
+LoopCopyDataInit:
+  ldr r0, =_sdata
+  ldr r3, =_edata
+  adds r2, r0, r1
+  cmp r2, r3
+  bcc CopyDataInit
+  ldr r2, =_sbss
+  b LoopFillZerobss
+/* Zero fill the bss segment. */
+FillZerobss:
+  movs r3, #0
+  str r3, [r2], #4
+
+LoopFillZerobss:
+  ldr r3, = _ebss
+  cmp r2, r3
+  bcc FillZerobss
+
+/* Call the clock system intitialization function.*/
+    bl  SystemInit
+/* Call static constructors */
+    bl __libc_init_array
+/* Call the application's entry point.*/
+  bl main
+  bx lr
+.size Reset_Handler, .-Reset_Handler
+
+/**
+ * @brief  This is the code that gets called when the processor receives an
+ *         unexpected interrupt.  This simply enters an infinite loop, preserving
+ *         the system state for examination by a debugger.
+ *
+ * @param  None
+ * @retval : None
+*/
+    .section .text.Default_Handler,"ax",%progbits
+Default_Handler:
+Infinite_Loop:
+  b Infinite_Loop
+  .size Default_Handler, .-Default_Handler
+/******************************************************************************
+*
+* The minimal vector table for a Cortex M3.  Note that the proper constructs
+* must be placed on this to ensure that it ends up at physical address
+* 0x0000.0000.
+*
+******************************************************************************/
+  .section .isr_vector,"a",%progbits
+  .type g_pfnVectors, %object
+  .size g_pfnVectors, .-g_pfnVectors
+
+
+g_pfnVectors:
+
+  .word _estack
+  .word Reset_Handler
+  .word NMI_Handler
+  .word HardFault_Handler
+  .word MemManage_Handler
+  .word BusFault_Handler
+  .word UsageFault_Handler
+  .word 0
+  .word 0
+  .word 0
+  .word 0
+  .word SVC_Handler
+  .word DebugMon_Handler
+  .word 0
+  .word PendSV_Handler
+  .word SysTick_Handler
+  .word WWDG_IRQHandler
+  .word PVD_IRQHandler
+  .word TAMPER_IRQHandler
+  .word RTC_IRQHandler
+  .word FLASH_IRQHandler
+  .word RCC_IRQHandler
+  .word EXTI0_IRQHandler
+  .word EXTI1_IRQHandler
+  .word EXTI2_IRQHandler
+  .word EXTI3_IRQHandler
+  .word EXTI4_IRQHandler
+  .word DMA1_Channel1_IRQHandler
+  .word DMA1_Channel2_IRQHandler
+  .word DMA1_Channel3_IRQHandler
+  .word DMA1_Channel4_IRQHandler
+  .word DMA1_Channel5_IRQHandler
+  .word DMA1_Channel6_IRQHandler
+  .word DMA1_Channel7_IRQHandler
+  .word ADC1_IRQHandler
+  .word 0
+  .word 0
+  .word 0
+  .word 0
+  .word EXTI9_5_IRQHandler
+  .word 0
+  .word 0
+  .word 0
+  .word 0
+  .word TIM2_IRQHandler
+  .word TIM3_IRQHandler
+  .word TIM4_IRQHandler
+  .word I2C1_EV_IRQHandler
+  .word I2C1_ER_IRQHandler
+  .word I2C2_EV_IRQHandler
+  .word I2C2_ER_IRQHandler
+  .word SPI1_IRQHandler
+  .word SPI2_IRQHandler
+  .word USART1_IRQHandler
+  .word USART2_IRQHandler
+  .word USART3_IRQHandler
+  .word EXTI15_10_IRQHandler
+  .word RTC_Alarm_IRQHandler
+  .word 0
+  .word 0
+  .word 0
+  .word 0
+  .word 0
+  .word 0
+  .word 0
+  .word 0
+  .word BootRAM          /* @0x108. This is for boot in RAM mode for
+                            STM32F10x Medium Density devices. */
+
+/*******************************************************************************
+*
+* Provide weak aliases for each Exception handler to the Default_Handler.
+* As they are weak aliases, any function with the same name will override
+* this definition.
+*
+*******************************************************************************/
+
+  .weak NMI_Handler
+  .thumb_set NMI_Handler,Default_Handler
+
+  .weak HardFault_Handler
+  .thumb_set HardFault_Handler,Default_Handler
+
+  .weak MemManage_Handler
+  .thumb_set MemManage_Handler,Default_Handler
+
+  .weak BusFault_Handler
+  .thumb_set BusFault_Handler,Default_Handler
+
+  .weak UsageFault_Handler
+  .thumb_set UsageFault_Handler,Default_Handler
+
+  .weak SVC_Handler
+  .thumb_set SVC_Handler,Default_Handler
+
+  .weak DebugMon_Handler
+  .thumb_set DebugMon_Handler,Default_Handler
+
+  .weak PendSV_Handler
+  .thumb_set PendSV_Handler,Default_Handler
+
+  .weak SysTick_Handler
+  .thumb_set SysTick_Handler,Default_Handler
+
+  .weak WWDG_IRQHandler
+  .thumb_set WWDG_IRQHandler,Default_Handler
+
+  .weak PVD_IRQHandler
+  .thumb_set PVD_IRQHandler,Default_Handler
+
+  .weak TAMPER_IRQHandler
+  .thumb_set TAMPER_IRQHandler,Default_Handler
+
+  .weak RTC_IRQHandler
+  .thumb_set RTC_IRQHandler,Default_Handler
+
+  .weak FLASH_IRQHandler
+  .thumb_set FLASH_IRQHandler,Default_Handler
+
+  .weak RCC_IRQHandler
+  .thumb_set RCC_IRQHandler,Default_Handler
+
+  .weak EXTI0_IRQHandler
+  .thumb_set EXTI0_IRQHandler,Default_Handler
+
+  .weak EXTI1_IRQHandler
+  .thumb_set EXTI1_IRQHandler,Default_Handler
+
+  .weak EXTI2_IRQHandler
+  .thumb_set EXTI2_IRQHandler,Default_Handler
+
+  .weak EXTI3_IRQHandler
+  .thumb_set EXTI3_IRQHandler,Default_Handler
+
+  .weak EXTI4_IRQHandler
+  .thumb_set EXTI4_IRQHandler,Default_Handler
+
+  .weak DMA1_Channel1_IRQHandler
+  .thumb_set DMA1_Channel1_IRQHandler,Default_Handler
+
+  .weak DMA1_Channel2_IRQHandler
+  .thumb_set DMA1_Channel2_IRQHandler,Default_Handler
+
+  .weak DMA1_Channel3_IRQHandler
+  .thumb_set DMA1_Channel3_IRQHandler,Default_Handler
+
+  .weak DMA1_Channel4_IRQHandler
+  .thumb_set DMA1_Channel4_IRQHandler,Default_Handler
+
+  .weak DMA1_Channel5_IRQHandler
+  .thumb_set DMA1_Channel5_IRQHandler,Default_Handler
+
+  .weak DMA1_Channel6_IRQHandler
+  .thumb_set DMA1_Channel6_IRQHandler,Default_Handler
+
+  .weak DMA1_Channel7_IRQHandler
+  .thumb_set DMA1_Channel7_IRQHandler,Default_Handler
+
+  .weak  ADC1_IRQHandler
+  .thumb_set ADC1_IRQHandler,Default_Handler
+
+  .weak EXTI9_5_IRQHandler
+  .thumb_set EXTI9_5_IRQHandler,Default_Handler
+
+  .weak TIM2_IRQHandler
+  .thumb_set TIM2_IRQHandler,Default_Handler
+
+  .weak TIM3_IRQHandler
+  .thumb_set TIM3_IRQHandler,Default_Handler
+
+  .weak TIM4_IRQHandler
+  .thumb_set TIM4_IRQHandler,Default_Handler
+
+  .weak I2C1_EV_IRQHandler
+  .thumb_set I2C1_EV_IRQHandler,Default_Handler
+
+  .weak I2C1_ER_IRQHandler
+  .thumb_set I2C1_ER_IRQHandler,Default_Handler
+
+  .weak I2C2_EV_IRQHandler
+  .thumb_set I2C2_EV_IRQHandler,Default_Handler
+
+  .weak I2C2_ER_IRQHandler
+  .thumb_set I2C2_ER_IRQHandler,Default_Handler
+
+  .weak SPI1_IRQHandler
+  .thumb_set SPI1_IRQHandler,Default_Handler
+
+  .weak SPI2_IRQHandler
+  .thumb_set SPI2_IRQHandler,Default_Handler
+
+  .weak USART1_IRQHandler
+  .thumb_set USART1_IRQHandler,Default_Handler
+
+  .weak USART2_IRQHandler
+  .thumb_set USART2_IRQHandler,Default_Handler
+
+  .weak USART3_IRQHandler
+  .thumb_set USART3_IRQHandler,Default_Handler
+
+  .weak EXTI15_10_IRQHandler
+  .thumb_set EXTI15_10_IRQHandler,Default_Handler
+
+  .weak RTC_Alarm_IRQHandler
+  .thumb_set RTC_Alarm_IRQHandler,Default_Handler
+
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
+

bsp/stm32f10x_HAL/Libraries/CMSIS/Device/ST/STM32F1xx/Source/Templates/gcc/startup_stm32f101xe.s

@@ -0,0 +1,438 @@
+/**
+  *************** (C) COPYRIGHT 2017 STMicroelectronics ************************
+  * @file      startup_stm32f101xe.s
+  * @author    MCD Application Team
+  * @version   V4.2.0
+  * @date      31-March-2017
+  * @brief     STM32F101xE Value Line Devices vector table for Atollic toolchain.
+  *            This module performs:
+  *                - Set the initial SP
+  *                - Set the initial PC == Reset_Handler,
+  *                - Set the vector table entries with the exceptions ISR address
+  *                - Configure the clock system   
+  *                - Branches to main in the C library (which eventually
+  *                  calls main()).
+  *            After Reset the Cortex-M3 processor is in Thread mode,
+  *            priority is Privileged, and the Stack is set to Main.
+  ******************************************************************************
+  *
+  * <h2><center>&copy; COPYRIGHT(c) 2017 STMicroelectronics</center></h2>
+  *
+  * Redistribution and use in source and binary forms, with or without modification,
+  * are permitted provided that the following conditions are met:
+  *   1. Redistributions of source code must retain the above copyright notice,
+  *      this list of conditions and the following disclaimer.
+  *   2. Redistributions in binary form must reproduce the above copyright notice,
+  *      this list of conditions and the following disclaimer in the documentation
+  *      and/or other materials provided with the distribution.
+  *   3. Neither the name of STMicroelectronics nor the names of its contributors
+  *      may be used to endorse or promote products derived from this software
+  *      without specific prior written permission.
+  *
+  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+  * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+  * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+  * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+  * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+  * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+  * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+  *
+  ******************************************************************************
+  */
+
+  .syntax unified
+  .cpu cortex-m3
+  .fpu softvfp
+  .thumb
+
+.global g_pfnVectors
+.global Default_Handler
+
+/* start address for the initialization values of the .data section.
+defined in linker script */
+.word _sidata
+/* start address for the .data section. defined in linker script */
+.word _sdata
+/* end address for the .data section. defined in linker script */
+.word _edata
+/* start address for the .bss section. defined in linker script */
+.word _sbss
+/* end address for the .bss section. defined in linker script */
+.word _ebss
+
+.equ  BootRAM,        0xF1E0F85F
+/**
+ * @brief  This is the code that gets called when the processor first
+ *          starts execution following a reset event. Only the absolutely
+ *          necessary set is performed, after which the application
+ *          supplied main() routine is called.
+ * @param  None
+ * @retval : None
+*/
+
+  .section .text.Reset_Handler
+  .weak Reset_Handler
+  .type Reset_Handler, %function
+Reset_Handler:
+
+/* Copy the data segment initializers from flash to SRAM */
+  movs r1, #0
+  b LoopCopyDataInit
+
+CopyDataInit:
+  ldr r3, =_sidata
+  ldr r3, [r3, r1]
+  str r3, [r0, r1]
+  adds r1, r1, #4
+
+LoopCopyDataInit:
+  ldr r0, =_sdata
+  ldr r3, =_edata
+  adds r2, r0, r1
+  cmp r2, r3
+  bcc CopyDataInit
+  ldr r2, =_sbss
+  b LoopFillZerobss
+/* Zero fill the bss segment. */
+FillZerobss:
+  movs r3, #0
+  str r3, [r2], #4
+
+LoopFillZerobss:
+  ldr r3, = _ebss
+  cmp r2, r3
+  bcc FillZerobss
+
+/* Call the clock system intitialization function.*/
+    bl  SystemInit
+/* Call static constructors */
+    bl __libc_init_array
+/* Call the application's entry point.*/
+  bl main
+  bx lr
+.size Reset_Handler, .-Reset_Handler
+
+/**
+ * @brief  This is the code that gets called when the processor receives an
+ *         unexpected interrupt.  This simply enters an infinite loop, preserving
+ *         the system state for examination by a debugger.
+ *
+ * @param  None
+ * @retval : None
+*/
+    .section .text.Default_Handler,"ax",%progbits
+Default_Handler:
+Infinite_Loop:
+  b Infinite_Loop
+  .size Default_Handler, .-Default_Handler
+/******************************************************************************
+*
+* The minimal vector table for a Cortex M3.  Note that the proper constructs
+* must be placed on this to ensure that it ends up at physical address
+* 0x0000.0000.
+*
+******************************************************************************/
+  .section .isr_vector,"a",%progbits
+  .type g_pfnVectors, %object
+  .size g_pfnVectors, .-g_pfnVectors
+
+
+g_pfnVectors:
+
+  .word _estack
+  .word Reset_Handler
+  .word NMI_Handler
+  .word HardFault_Handler
+  .word MemManage_Handler
+  .word BusFault_Handler
+  .word UsageFault_Handler
+  .word 0
+  .word 0
+  .word 0
+  .word 0
+  .word SVC_Handler
+  .word DebugMon_Handler
+  .word 0
+  .word PendSV_Handler
+  .word SysTick_Handler
+  .word WWDG_IRQHandler
+  .word PVD_IRQHandler
+  .word TAMPER_IRQHandler
+  .word RTC_IRQHandler
+  .word FLASH_IRQHandler
+  .word RCC_IRQHandler
+  .word EXTI0_IRQHandler
+  .word EXTI1_IRQHandler
+  .word EXTI2_IRQHandler
+  .word EXTI3_IRQHandler
+  .word EXTI4_IRQHandler
+  .word DMA1_Channel1_IRQHandler
+  .word DMA1_Channel2_IRQHandler
+  .word DMA1_Channel3_IRQHandler
+  .word DMA1_Channel4_IRQHandler
+  .word DMA1_Channel5_IRQHandler
+  .word DMA1_Channel6_IRQHandler
+  .word DMA1_Channel7_IRQHandler
+  .word ADC1_IRQHandler
+  .word 0
+  .word 0
+  .word 0
+  .word 0
+  .word EXTI9_5_IRQHandler
+  .word 0
+  .word 0
+  .word 0
+  .word 0
+  .word TIM2_IRQHandler
+  .word TIM3_IRQHandler
+  .word TIM4_IRQHandler
+  .word I2C1_EV_IRQHandler
+  .word I2C1_ER_IRQHandler
+  .word I2C2_EV_IRQHandler
+  .word I2C2_ER_IRQHandler
+  .word SPI1_IRQHandler
+  .word SPI2_IRQHandler
+  .word USART1_IRQHandler
+  .word USART2_IRQHandler
+  .word USART3_IRQHandler
+  .word EXTI15_10_IRQHandler
+  .word RTC_Alarm_IRQHandler
+  .word 0
+  .word 0
+  .word 0
+  .word 0
+  .word 0
+  .word 0
+  .word FSMC_IRQHandler
+  .word 0
+  .word TIM5_IRQHandler
+  .word SPI3_IRQHandler
+  .word UART4_IRQHandler
+  .word UART5_IRQHandler
+  .word TIM6_IRQHandler
+  .word TIM7_IRQHandler
+  .word DMA2_Channel1_IRQHandler
+  .word DMA2_Channel2_IRQHandler
+  .word DMA2_Channel3_IRQHandler
+  .word DMA2_Channel4_5_IRQHandler
+  .word 0
+  .word 0
+  .word 0
+  .word 0
+  .word 0
+  .word 0
+  .word 0
+  .word 0
+  .word 0
+  .word 0
+  .word 0
+  .word 0
+  .word 0
+  .word 0
+  .word 0
+  .word 0
+  .word 0
+  .word 0
+  .word 0
+  .word 0
+  .word 0
+  .word 0
+  .word 0
+  .word 0
+  .word 0
+  .word 0
+  .word 0
+  .word 0
+  .word 0
+  .word 0
+  .word 0
+  .word 0
+  .word 0
+  .word 0
+  .word 0
+  .word 0
+  .word 0
+  .word 0
+  .word 0
+  .word 0
+  .word 0
+  .word 0
+  .word 0
+  .word 0
+  .word BootRAM       /* @0x1E0. This is for boot in RAM mode for
+                         STM32F10x High Density devices. */
+
+/*******************************************************************************
+*
+* Provide weak aliases for each Exception handler to the Default_Handler.
+* As they are weak aliases, any function with the same name will override
+* this definition.
+*
+*******************************************************************************/
+
+  .weak NMI_Handler
+  .thumb_set NMI_Handler,Default_Handler
+
+  .weak HardFault_Handler
+  .thumb_set HardFault_Handler,Default_Handler
+
+  .weak MemManage_Handler
+  .thumb_set MemManage_Handler,Default_Handler
+
+  .weak BusFault_Handler
+  .thumb_set BusFault_Handler,Default_Handler
+
+  .weak UsageFault_Handler
+  .thumb_set UsageFault_Handler,Default_Handler
+
+  .weak SVC_Handler
+  .thumb_set SVC_Handler,Default_Handler
+
+  .weak DebugMon_Handler
+  .thumb_set DebugMon_Handler,Default_Handler
+
+  .weak PendSV_Handler
+  .thumb_set PendSV_Handler,Default_Handler
+
+  .weak SysTick_Handler
+  .thumb_set SysTick_Handler,Default_Handler
+
+  .weak WWDG_IRQHandler
+  .thumb_set WWDG_IRQHandler,Default_Handler
+
+  .weak PVD_IRQHandler
+  .thumb_set PVD_IRQHandler,Default_Handler
+
+  .weak TAMPER_IRQHandler
+  .thumb_set TAMPER_IRQHandler,Default_Handler
+
+  .weak RTC_IRQHandler
+  .thumb_set RTC_IRQHandler,Default_Handler
+
+  .weak FLASH_IRQHandler
+  .thumb_set FLASH_IRQHandler,Default_Handler
+
+  .weak RCC_IRQHandler
+  .thumb_set RCC_IRQHandler,Default_Handler
+
+  .weak EXTI0_IRQHandler
+  .thumb_set EXTI0_IRQHandler,Default_Handler
+
+  .weak EXTI1_IRQHandler
+  .thumb_set EXTI1_IRQHandler,Default_Handler
+
+  .weak EXTI2_IRQHandler
+  .thumb_set EXTI2_IRQHandler,Default_Handler
+
+  .weak EXTI3_IRQHandler
+  .thumb_set EXTI3_IRQHandler,Default_Handler
+
+  .weak EXTI4_IRQHandler
+  .thumb_set EXTI4_IRQHandler,Default_Handler
+
+  .weak DMA1_Channel1_IRQHandler
+  .thumb_set DMA1_Channel1_IRQHandler,Default_Handler
+
+  .weak DMA1_Channel2_IRQHandler
+  .thumb_set DMA1_Channel2_IRQHandler,Default_Handler
+
+  .weak DMA1_Channel3_IRQHandler
+  .thumb_set DMA1_Channel3_IRQHandler,Default_Handler
+
+  .weak DMA1_Channel4_IRQHandler
+  .thumb_set DMA1_Channel4_IRQHandler,Default_Handler
+
+  .weak DMA1_Channel5_IRQHandler
+  .thumb_set DMA1_Channel5_IRQHandler,Default_Handler
+
+  .weak DMA1_Channel6_IRQHandler
+  .thumb_set DMA1_Channel6_IRQHandler,Default_Handler
+
+  .weak DMA1_Channel7_IRQHandler
+  .thumb_set DMA1_Channel7_IRQHandler,Default_Handler
+
+  .weak  ADC1_IRQHandler
+  .thumb_set ADC1_IRQHandler,Default_Handler
+
+  .weak EXTI9_5_IRQHandler
+  .thumb_set EXTI9_5_IRQHandler,Default_Handler
+
+  .weak TIM2_IRQHandler
+  .thumb_set TIM2_IRQHandler,Default_Handler
+
+  .weak TIM3_IRQHandler
+  .thumb_set TIM3_IRQHandler,Default_Handler
+
+  .weak TIM4_IRQHandler
+  .thumb_set TIM4_IRQHandler,Default_Handler
+
+  .weak I2C1_EV_IRQHandler
+  .thumb_set I2C1_EV_IRQHandler,Default_Handler
+
+  .weak I2C1_ER_IRQHandler
+  .thumb_set I2C1_ER_IRQHandler,Default_Handler
+
+  .weak I2C2_EV_IRQHandler
+  .thumb_set I2C2_EV_IRQHandler,Default_Handler
+
+  .weak I2C2_ER_IRQHandler
+  .thumb_set I2C2_ER_IRQHandler,Default_Handler
+
+  .weak SPI1_IRQHandler
+  .thumb_set SPI1_IRQHandler,Default_Handler
+
+  .weak SPI2_IRQHandler
+  .thumb_set SPI2_IRQHandler,Default_Handler
+
+  .weak USART1_IRQHandler
+  .thumb_set USART1_IRQHandler,Default_Handler
+
+  .weak USART2_IRQHandler
+  .thumb_set USART2_IRQHandler,Default_Handler
+
+  .weak USART3_IRQHandler
+  .thumb_set USART3_IRQHandler,Default_Handler
+
+  .weak EXTI15_10_IRQHandler
+  .thumb_set EXTI15_10_IRQHandler,Default_Handler
+
+  .weak RTC_Alarm_IRQHandler
+  .thumb_set RTC_Alarm_IRQHandler,Default_Handler
+
+  .weak FSMC_IRQHandler
+  .thumb_set FSMC_IRQHandler,Default_Handler
+
+  .weak TIM5_IRQHandler
+  .thumb_set TIM5_IRQHandler,Default_Handler
+
+  .weak SPI3_IRQHandler
+  .thumb_set SPI3_IRQHandler,Default_Handler
+
+  .weak UART4_IRQHandler
+  .thumb_set UART4_IRQHandler,Default_Handler
+
+  .weak UART5_IRQHandler
+  .thumb_set UART5_IRQHandler,Default_Handler
+
+  .weak TIM6_IRQHandler
+  .thumb_set TIM6_IRQHandler,Default_Handler
+
+  .weak TIM7_IRQHandler
+  .thumb_set TIM7_IRQHandler,Default_Handler
+
+  .weak DMA2_Channel1_IRQHandler
+  .thumb_set DMA2_Channel1_IRQHandler,Default_Handler
+
+  .weak DMA2_Channel2_IRQHandler
+  .thumb_set DMA2_Channel2_IRQHandler,Default_Handler
+
+  .weak DMA2_Channel3_IRQHandler
+  .thumb_set DMA2_Channel3_IRQHandler,Default_Handler
+
+  .weak DMA2_Channel4_5_IRQHandler
+  .thumb_set DMA2_Channel4_5_IRQHandler,Default_Handler
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

bsp/stm32f10x_HAL/Libraries/CMSIS/Device/ST/STM32F1xx/Source/Templates/gcc/startup_stm32f101xg.s

@@ -0,0 +1,454 @@
+/**
+  *************** (C) COPYRIGHT 2017 STMicroelectronics ************************
+  * @file      startup_stm32f101xg.s
+  * @author    MCD Application Team
+  * @version   V4.2.0
+  * @date      31-March-2017
+  * @brief     STM32F101xG Devices vector table for Atollic toolchain.
+  *            This module performs:
+  *                - Set the initial SP
+  *                - Set the initial PC == Reset_Handler,
+  *                - Set the vector table entries with the exceptions ISR address
+  *                - Configure the clock system   
+  *                - Branches to main in the C library (which eventually
+  *                  calls main()).
+  *            After Reset the Cortex-M3 processor is in Thread mode,
+  *            priority is Privileged, and the Stack is set to Main.
+  ******************************************************************************
+  *
+  * <h2><center>&copy; COPYRIGHT(c) 2017 STMicroelectronics</center></h2>
+  *
+  * Redistribution and use in source and binary forms, with or without modification,
+  * are permitted provided that the following conditions are met:
+  *   1. Redistributions of source code must retain the above copyright notice,
+  *      this list of conditions and the following disclaimer.
+  *   2. Redistributions in binary form must reproduce the above copyright notice,
+  *      this list of conditions and the following disclaimer in the documentation
+  *      and/or other materials provided with the distribution.
+  *   3. Neither the name of STMicroelectronics nor the names of its contributors
+  *      may be used to endorse or promote products derived from this software
+  *      without specific prior written permission.
+  *
+  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+  * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+  * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+  * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+  * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+  * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+  * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+  *
+  ******************************************************************************
+  */
+
+  .syntax unified
+  .cpu cortex-m3
+  .fpu softvfp
+  .thumb
+
+.global g_pfnVectors
+.global Default_Handler
+
+/* start address for the initialization values of the .data section.
+defined in linker script */
+.word _sidata
+/* start address for the .data section. defined in linker script */
+.word _sdata
+/* end address for the .data section. defined in linker script */
+.word _edata
+/* start address for the .bss section. defined in linker script */
+.word _sbss
+/* end address for the .bss section. defined in linker script */
+.word _ebss
+
+.equ  BootRAM,        0xF1E0F85F
+/**
+ * @brief  This is the code that gets called when the processor first
+ *          starts execution following a reset event. Only the absolutely
+ *          necessary set is performed, after which the application
+ *          supplied main() routine is called.
+ * @param  None
+ * @retval : None
+*/
+
+  .section .text.Reset_Handler
+  .weak Reset_Handler
+  .type Reset_Handler, %function
+Reset_Handler:
+
+/* Copy the data segment initializers from flash to SRAM */
+  movs r1, #0
+  b LoopCopyDataInit
+
+CopyDataInit:
+  ldr r3, =_sidata
+  ldr r3, [r3, r1]
+  str r3, [r0, r1]
+  adds r1, r1, #4
+
+LoopCopyDataInit:
+  ldr r0, =_sdata
+  ldr r3, =_edata
+  adds r2, r0, r1
+  cmp r2, r3
+  bcc CopyDataInit
+  ldr r2, =_sbss
+  b LoopFillZerobss
+/* Zero fill the bss segment. */
+FillZerobss:
+  movs r3, #0
+  str r3, [r2], #4
+
+LoopFillZerobss:
+  ldr r3, = _ebss
+  cmp r2, r3
+  bcc FillZerobss
+
+/* Call the clock system intitialization function.*/
+    bl  SystemInit
+/* Call static constructors */
+    bl __libc_init_array
+/* Call the application's entry point.*/
+  bl main
+  bx lr
+.size Reset_Handler, .-Reset_Handler
+
+/**
+ * @brief  This is the code that gets called when the processor receives an
+ *         unexpected interrupt.  This simply enters an infinite loop, preserving
+ *         the system state for examination by a debugger.
+ * @param  None
+ * @retval None       
+*/
+    .section .text.Default_Handler,"ax",%progbits
+Default_Handler:
+Infinite_Loop:
+  b Infinite_Loop
+  .size Default_Handler, .-Default_Handler
+/******************************************************************************
+*
+* The minimal vector table for a Cortex M3.  Note that the proper constructs
+* must be placed on this to ensure that it ends up at physical address
+* 0x0000.0000.
+*
+******************************************************************************/
+  .section .isr_vector,"a",%progbits
+  .type g_pfnVectors, %object
+  .size g_pfnVectors, .-g_pfnVectors
+
+
+g_pfnVectors:
+
+  .word  _estack
+  .word  Reset_Handler
+  .word  NMI_Handler
+  .word  HardFault_Handler
+  .word  MemManage_Handler
+  .word  BusFault_Handler
+  .word  UsageFault_Handler
+  .word  0
+  .word  0
+  .word  0
+  .word  0
+  .word  SVC_Handler
+  .word  DebugMon_Handler
+  .word  0
+  .word  PendSV_Handler
+  .word  SysTick_Handler
+  .word  WWDG_IRQHandler
+  .word  PVD_IRQHandler
+  .word  TAMPER_IRQHandler
+  .word  RTC_IRQHandler
+  .word  FLASH_IRQHandler
+  .word  RCC_IRQHandler
+  .word  EXTI0_IRQHandler
+  .word  EXTI1_IRQHandler
+  .word  EXTI2_IRQHandler
+  .word  EXTI3_IRQHandler
+  .word  EXTI4_IRQHandler
+  .word  DMA1_Channel1_IRQHandler
+  .word  DMA1_Channel2_IRQHandler
+  .word  DMA1_Channel3_IRQHandler
+  .word  DMA1_Channel4_IRQHandler
+  .word  DMA1_Channel5_IRQHandler
+  .word  DMA1_Channel6_IRQHandler
+  .word  DMA1_Channel7_IRQHandler
+  .word  ADC1_2_IRQHandler
+  .word  0
+  .word  0
+  .word  0
+  .word  0
+  .word  EXTI9_5_IRQHandler
+  .word  TIM9_IRQHandler
+  .word  TIM10_IRQHandler
+  .word  TIM11_IRQHandler
+  .word  0
+  .word  TIM2_IRQHandler
+  .word  TIM3_IRQHandler
+  .word  TIM4_IRQHandler
+  .word  I2C1_EV_IRQHandler
+  .word  I2C1_ER_IRQHandler
+  .word  I2C2_EV_IRQHandler
+  .word  I2C2_ER_IRQHandler
+  .word  SPI1_IRQHandler
+  .word  SPI2_IRQHandler
+  .word  USART1_IRQHandler
+  .word  USART2_IRQHandler
+  .word  USART3_IRQHandler
+  .word  EXTI15_10_IRQHandler
+  .word  RTC_Alarm_IRQHandler
+  .word 0
+  .word TIM12_IRQHandler
+  .word TIM13_IRQHandler
+  .word TIM14_IRQHandler
+  .word 0
+  .word 0
+  .word  FSMC_IRQHandler
+  .word 0
+  .word  TIM5_IRQHandler
+  .word  SPI3_IRQHandler
+  .word  UART4_IRQHandler
+  .word  UART5_IRQHandler
+  .word  TIM6_IRQHandler
+  .word  TIM7_IRQHandler
+  .word  DMA2_Channel1_IRQHandler
+  .word  DMA2_Channel2_IRQHandler
+  .word  DMA2_Channel3_IRQHandler
+  .word  DMA2_Channel4_5_IRQHandler
+  .word  0
+  .word  0
+  .word  0
+  .word  0
+  .word  0
+  .word  0
+  .word  0
+  .word  0
+  .word  0
+  .word  0
+  .word  0
+  .word  0
+  .word  0
+  .word  0
+  .word  0
+  .word  0
+  .word  0
+  .word  0
+  .word  0
+  .word  0
+  .word  0
+  .word  0
+  .word  0
+  .word  0
+  .word  0
+  .word  0
+  .word  0
+  .word  0
+  .word  0
+  .word  0
+  .word  0
+  .word  0
+  .word  0
+  .word  0
+  .word  0
+  .word  0
+  .word  0
+  .word  0
+  .word  0
+  .word  0
+  .word  0
+  .word  0
+  .word  0
+  .word  0
+  .word  BootRAM       /* @0x1E0. This is for boot in RAM mode for 
+                         STM32F10x XL-Density devices. */
+/*******************************************************************************
+*
+* Provide weak aliases for each Exception handler to the Default_Handler. 
+* As they are weak aliases, any function with the same name will override 
+* this definition.
+* 
+*******************************************************************************/
+    
+  .weak  NMI_Handler
+  .thumb_set NMI_Handler,Default_Handler
+  
+  .weak  HardFault_Handler
+  .thumb_set HardFault_Handler,Default_Handler
+  
+  .weak  MemManage_Handler
+  .thumb_set MemManage_Handler,Default_Handler
+  
+  .weak  BusFault_Handler
+  .thumb_set BusFault_Handler,Default_Handler
+
+  .weak  UsageFault_Handler
+  .thumb_set UsageFault_Handler,Default_Handler
+
+  .weak  SVC_Handler
+  .thumb_set SVC_Handler,Default_Handler
+
+  .weak  DebugMon_Handler
+  .thumb_set DebugMon_Handler,Default_Handler
+
+  .weak  PendSV_Handler
+  .thumb_set PendSV_Handler,Default_Handler
+
+  .weak  SysTick_Handler
+  .thumb_set SysTick_Handler,Default_Handler
+
+  .weak  WWDG_IRQHandler
+  .thumb_set WWDG_IRQHandler,Default_Handler
+
+  .weak  PVD_IRQHandler
+  .thumb_set PVD_IRQHandler,Default_Handler
+
+  .weak  TAMPER_IRQHandler
+  .thumb_set TAMPER_IRQHandler,Default_Handler
+
+  .weak  RTC_IRQHandler
+  .thumb_set RTC_IRQHandler,Default_Handler
+
+  .weak  FLASH_IRQHandler
+  .thumb_set FLASH_IRQHandler,Default_Handler
+
+  .weak  RCC_IRQHandler
+  .thumb_set RCC_IRQHandler,Default_Handler
+
+  .weak  EXTI0_IRQHandler
+  .thumb_set EXTI0_IRQHandler,Default_Handler
+
+  .weak  EXTI1_IRQHandler
+  .thumb_set EXTI1_IRQHandler,Default_Handler
+
+  .weak  EXTI2_IRQHandler
+  .thumb_set EXTI2_IRQHandler,Default_Handler
+
+  .weak  EXTI3_IRQHandler
+  .thumb_set EXTI3_IRQHandler,Default_Handler
+
+  .weak  EXTI4_IRQHandler
+  .thumb_set EXTI4_IRQHandler,Default_Handler
+
+  .weak  DMA1_Channel1_IRQHandler
+  .thumb_set DMA1_Channel1_IRQHandler,Default_Handler
+
+  .weak  DMA1_Channel2_IRQHandler
+  .thumb_set DMA1_Channel2_IRQHandler,Default_Handler
+
+  .weak  DMA1_Channel3_IRQHandler
+  .thumb_set DMA1_Channel3_IRQHandler,Default_Handler
+
+  .weak  DMA1_Channel4_IRQHandler
+  .thumb_set DMA1_Channel4_IRQHandler,Default_Handler
+
+  .weak  DMA1_Channel5_IRQHandler
+  .thumb_set DMA1_Channel5_IRQHandler,Default_Handler
+
+  .weak  DMA1_Channel6_IRQHandler
+  .thumb_set DMA1_Channel6_IRQHandler,Default_Handler
+
+  .weak  DMA1_Channel7_IRQHandler
+  .thumb_set DMA1_Channel7_IRQHandler,Default_Handler
+
+  .weak  ADC1_2_IRQHandler
+  .thumb_set ADC1_2_IRQHandler,Default_Handler
+
+  .weak  EXTI9_5_IRQHandler
+  .thumb_set EXTI9_5_IRQHandler,Default_Handler
+
+  .weak  TIM9_IRQHandler
+  .thumb_set TIM9_IRQHandler,Default_Handler
+
+  .weak  TIM10_IRQHandler
+  .thumb_set TIM10_IRQHandler,Default_Handler
+
+  .weak  TIM11_IRQHandler
+  .thumb_set TIM11_IRQHandler,Default_Handler
+
+  .weak  TIM2_IRQHandler
+  .thumb_set TIM2_IRQHandler,Default_Handler
+
+  .weak  TIM3_IRQHandler
+  .thumb_set TIM3_IRQHandler,Default_Handler
+
+  .weak  TIM4_IRQHandler
+  .thumb_set TIM4_IRQHandler,Default_Handler
+
+  .weak  I2C1_EV_IRQHandler
+  .thumb_set I2C1_EV_IRQHandler,Default_Handler
+
+  .weak  I2C1_ER_IRQHandler
+  .thumb_set I2C1_ER_IRQHandler,Default_Handler
+
+  .weak  I2C2_EV_IRQHandler
+  .thumb_set I2C2_EV_IRQHandler,Default_Handler
+
+  .weak  I2C2_ER_IRQHandler
+  .thumb_set I2C2_ER_IRQHandler,Default_Handler
+
+  .weak  SPI1_IRQHandler
+  .thumb_set SPI1_IRQHandler,Default_Handler
+
+  .weak  SPI2_IRQHandler
+  .thumb_set SPI2_IRQHandler,Default_Handler
+
+  .weak  USART1_IRQHandler
+  .thumb_set USART1_IRQHandler,Default_Handler
+
+  .weak  USART2_IRQHandler
+  .thumb_set USART2_IRQHandler,Default_Handler
+
+  .weak  USART3_IRQHandler
+  .thumb_set USART3_IRQHandler,Default_Handler
+
+  .weak  EXTI15_10_IRQHandler
+  .thumb_set EXTI15_10_IRQHandler,Default_Handler
+
+  .weak  RTC_Alarm_IRQHandler
+  .thumb_set RTC_Alarm_IRQHandler,Default_Handler
+
+  .weak  TIM12_IRQHandler
+  .thumb_set TIM12_IRQHandler,Default_Handler
+
+  .weak  TIM13_IRQHandler
+  .thumb_set TIM13_IRQHandler,Default_Handler
+
+  .weak  TIM14_IRQHandler
+  .thumb_set TIM14_IRQHandler,Default_Handler
+
+  .weak  FSMC_IRQHandler
+  .thumb_set FSMC_IRQHandler,Default_Handler
+
+  .weak  TIM5_IRQHandler
+  .thumb_set TIM5_IRQHandler,Default_Handler
+
+  .weak  SPI3_IRQHandler
+  .thumb_set SPI3_IRQHandler,Default_Handler
+
+  .weak  UART4_IRQHandler
+  .thumb_set UART4_IRQHandler,Default_Handler
+
+  .weak  UART5_IRQHandler
+  .thumb_set UART5_IRQHandler,Default_Handler
+
+  .weak  TIM6_IRQHandler
+  .thumb_set TIM6_IRQHandler,Default_Handler
+
+  .weak  TIM7_IRQHandler
+  .thumb_set TIM7_IRQHandler,Default_Handler
+
+  .weak  DMA2_Channel1_IRQHandler
+  .thumb_set DMA2_Channel1_IRQHandler,Default_Handler
+
+  .weak  DMA2_Channel2_IRQHandler
+  .thumb_set DMA2_Channel2_IRQHandler,Default_Handler
+
+  .weak  DMA2_Channel3_IRQHandler
+  .thumb_set DMA2_Channel3_IRQHandler,Default_Handler
+
+  .weak  DMA2_Channel4_5_IRQHandler
+  .thumb_set DMA2_Channel4_5_IRQHandler,Default_Handler
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

bsp/stm32f10x_HAL/Libraries/CMSIS/Device/ST/STM32F1xx/Source/Templates/gcc/startup_stm32f102x6.s

@@ -0,0 +1,345 @@
+/**
+  *************** (C) COPYRIGHT 2017 STMicroelectronics ************************
+  * @file      startup_stm32f102x6.s
+  * @author    MCD Application Team
+  * @version   V4.2.0
+  * @date      31-March-2017
+  * @brief     STM32F102x6 Devices vector table for Atollic toolchain.
+  *            This module performs:
+  *                - Set the initial SP
+  *                - Set the initial PC == Reset_Handler,
+  *                - Set the vector table entries with the exceptions ISR address
+  *                - Configure the clock system   
+  *                - Branches to main in the C library (which eventually
+  *                  calls main()).
+  *            After Reset the Cortex-M3 processor is in Thread mode,
+  *            priority is Privileged, and the Stack is set to Main.
+  ******************************************************************************
+  *
+  * <h2><center>&copy; COPYRIGHT(c) 2017 STMicroelectronics</center></h2>
+  *
+  * Redistribution and use in source and binary forms, with or without modification,
+  * are permitted provided that the following conditions are met:
+  *   1. Redistributions of source code must retain the above copyright notice,
+  *      this list of conditions and the following disclaimer.
+  *   2. Redistributions in binary form must reproduce the above copyright notice,
+  *      this list of conditions and the following disclaimer in the documentation
+  *      and/or other materials provided with the distribution.
+  *   3. Neither the name of STMicroelectronics nor the names of its contributors
+  *      may be used to endorse or promote products derived from this software
+  *      without specific prior written permission.
+  *
+  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+  * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+  * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+  * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+  * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+  * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+  * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+  *
+  ******************************************************************************
+  */
+
+  .syntax unified
+  .cpu cortex-m3
+  .fpu softvfp
+  .thumb
+
+.global g_pfnVectors
+.global Default_Handler
+
+/* start address for the initialization values of the .data section.
+defined in linker script */
+.word _sidata
+/* start address for the .data section. defined in linker script */
+.word _sdata
+/* end address for the .data section. defined in linker script */
+.word _edata
+/* start address for the .bss section. defined in linker script */
+.word _sbss
+/* end address for the .bss section. defined in linker script */
+.word _ebss
+
+.equ  BootRAM, 0xF108F85F
+/**
+ * @brief  This is the code that gets called when the processor first
+ *          starts execution following a reset event. Only the absolutely
+ *          necessary set is performed, after which the application
+ *          supplied main() routine is called.
+ * @param  None
+ * @retval : None
+*/
+
+  .section .text.Reset_Handler
+  .weak Reset_Handler
+  .type Reset_Handler, %function
+Reset_Handler:
+
+/* Copy the data segment initializers from flash to SRAM */
+  movs r1, #0
+  b LoopCopyDataInit
+
+CopyDataInit:
+  ldr r3, =_sidata
+  ldr r3, [r3, r1]
+  str r3, [r0, r1]
+  adds r1, r1, #4
+
+LoopCopyDataInit:
+  ldr r0, =_sdata
+  ldr r3, =_edata
+  adds r2, r0, r1
+  cmp r2, r3
+  bcc CopyDataInit
+  ldr r2, =_sbss
+  b LoopFillZerobss
+/* Zero fill the bss segment. */
+FillZerobss:
+  movs r3, #0
+  str r3, [r2], #4
+
+LoopFillZerobss:
+  ldr r3, = _ebss
+  cmp r2, r3
+  bcc FillZerobss
+
+/* Call the clock system intitialization function.*/
+    bl  SystemInit
+/* Call static constructors */
+    bl __libc_init_array
+/* Call the application's entry point.*/
+  bl main
+  bx lr
+.size Reset_Handler, .-Reset_Handler
+
+/**
+ * @brief  This is the code that gets called when the processor receives an
+ *         unexpected interrupt.  This simply enters an infinite loop, preserving
+ *         the system state for examination by a debugger.
+ *
+ * @param  None
+ * @retval : None
+*/
+    .section .text.Default_Handler,"ax",%progbits
+Default_Handler:
+Infinite_Loop:
+  b Infinite_Loop
+  .size Default_Handler, .-Default_Handler
+/******************************************************************************
+*
+* The minimal vector table for a Cortex M3.  Note that the proper constructs
+* must be placed on this to ensure that it ends up at physical address
+* 0x0000.0000.
+*
+******************************************************************************/
+  .section .isr_vector,"a",%progbits
+  .type g_pfnVectors, %object
+  .size g_pfnVectors, .-g_pfnVectors
+
+
+g_pfnVectors:
+
+  .word _estack
+  .word Reset_Handler
+  .word NMI_Handler
+  .word HardFault_Handler
+  .word MemManage_Handler
+  .word BusFault_Handler
+  .word UsageFault_Handler
+  .word 0
+  .word 0
+  .word 0
+  .word 0
+  .word SVC_Handler
+  .word DebugMon_Handler
+  .word 0
+  .word PendSV_Handler
+  .word SysTick_Handler
+  .word WWDG_IRQHandler
+  .word PVD_IRQHandler
+  .word TAMPER_IRQHandler
+  .word RTC_IRQHandler
+  .word FLASH_IRQHandler
+  .word RCC_IRQHandler
+  .word EXTI0_IRQHandler
+  .word EXTI1_IRQHandler
+  .word EXTI2_IRQHandler
+  .word EXTI3_IRQHandler
+  .word EXTI4_IRQHandler
+  .word DMA1_Channel1_IRQHandler
+  .word DMA1_Channel2_IRQHandler
+  .word DMA1_Channel3_IRQHandler
+  .word DMA1_Channel4_IRQHandler
+  .word DMA1_Channel5_IRQHandler
+  .word DMA1_Channel6_IRQHandler
+  .word DMA1_Channel7_IRQHandler
+  .word ADC1_IRQHandler
+  .word USB_HP_IRQHandler
+  .word USB_LP_IRQHandler
+  .word 0 
+  .word 0
+  .word EXTI9_5_IRQHandler
+  .word 0
+  .word 0
+  .word 0
+  .word 0
+  .word TIM2_IRQHandler
+  .word TIM3_IRQHandler
+  .word 0
+  .word I2C1_EV_IRQHandler
+  .word I2C1_ER_IRQHandler
+  .word 0
+  .word 0
+  .word SPI1_IRQHandler
+  .word 0
+  .word USART1_IRQHandler
+  .word USART2_IRQHandler
+  .word 0
+  .word EXTI15_10_IRQHandler
+  .word RTC_Alarm_IRQHandler
+  .word USBWakeUp_IRQHandler
+  .word 0
+  .word 0
+  .word 0
+  .word 0
+  .word 0
+  .word 0
+  .word 0
+  .word BootRAM        /* @0x108. This is for boot in RAM mode for
+                          STM32F10x Low Density devices.*/
+
+/*******************************************************************************
+*
+* Provide weak aliases for each Exception handler to the Default_Handler.
+* As they are weak aliases, any function with the same name will override
+* this definition.
+*
+*******************************************************************************/
+
+  .weak NMI_Handler
+  .thumb_set NMI_Handler,Default_Handler
+
+  .weak HardFault_Handler
+  .thumb_set HardFault_Handler,Default_Handler
+
+  .weak MemManage_Handler
+  .thumb_set MemManage_Handler,Default_Handler
+
+  .weak BusFault_Handler
+  .thumb_set BusFault_Handler,Default_Handler
+
+  .weak UsageFault_Handler
+  .thumb_set UsageFault_Handler,Default_Handler
+
+  .weak SVC_Handler
+  .thumb_set SVC_Handler,Default_Handler
+
+  .weak DebugMon_Handler
+  .thumb_set DebugMon_Handler,Default_Handler
+
+  .weak PendSV_Handler
+  .thumb_set PendSV_Handler,Default_Handler
+
+  .weak SysTick_Handler
+  .thumb_set SysTick_Handler,Default_Handler
+
+  .weak WWDG_IRQHandler
+  .thumb_set WWDG_IRQHandler,Default_Handler
+
+  .weak PVD_IRQHandler
+  .thumb_set PVD_IRQHandler,Default_Handler
+
+  .weak TAMPER_IRQHandler
+  .thumb_set TAMPER_IRQHandler,Default_Handler
+
+  .weak RTC_IRQHandler
+  .thumb_set RTC_IRQHandler,Default_Handler
+
+  .weak FLASH_IRQHandler
+  .thumb_set FLASH_IRQHandler,Default_Handler
+
+  .weak RCC_IRQHandler
+  .thumb_set RCC_IRQHandler,Default_Handler
+
+  .weak EXTI0_IRQHandler
+  .thumb_set EXTI0_IRQHandler,Default_Handler
+
+  .weak EXTI1_IRQHandler
+  .thumb_set EXTI1_IRQHandler,Default_Handler
+
+  .weak EXTI2_IRQHandler
+  .thumb_set EXTI2_IRQHandler,Default_Handler
+
+  .weak EXTI3_IRQHandler
+  .thumb_set EXTI3_IRQHandler,Default_Handler
+
+  .weak EXTI4_IRQHandler
+  .thumb_set EXTI4_IRQHandler,Default_Handler
+
+  .weak DMA1_Channel1_IRQHandler
+  .thumb_set DMA1_Channel1_IRQHandler,Default_Handler
+
+  .weak DMA1_Channel2_IRQHandler
+  .thumb_set DMA1_Channel2_IRQHandler,Default_Handler
+
+  .weak DMA1_Channel3_IRQHandler
+  .thumb_set DMA1_Channel3_IRQHandler,Default_Handler
+
+  .weak DMA1_Channel4_IRQHandler
+  .thumb_set DMA1_Channel4_IRQHandler,Default_Handler
+
+  .weak DMA1_Channel5_IRQHandler
+  .thumb_set DMA1_Channel5_IRQHandler,Default_Handler
+
+  .weak DMA1_Channel6_IRQHandler
+  .thumb_set DMA1_Channel6_IRQHandler,Default_Handler
+
+  .weak DMA1_Channel7_IRQHandler
+  .thumb_set DMA1_Channel7_IRQHandler,Default_Handler
+
+  .weak  ADC1_IRQHandler
+  .thumb_set ADC1_IRQHandler,Default_Handler
+
+  .weak USB_HP_IRQHandler
+  .thumb_set USB_HP_IRQHandler,Default_Handler
+
+  .weak USB_LP_IRQHandler
+  .thumb_set USB_LP_IRQHandler,Default_Handler
+
+  .weak EXTI9_5_IRQHandler
+  .thumb_set EXTI9_5_IRQHandler,Default_Handler
+
+  .weak TIM2_IRQHandler
+  .thumb_set TIM2_IRQHandler,Default_Handler
+
+  .weak TIM3_IRQHandler
+  .thumb_set TIM3_IRQHandler,Default_Handler
+
+  .weak I2C1_EV_IRQHandler
+  .thumb_set I2C1_EV_IRQHandler,Default_Handler
+
+  .weak I2C1_ER_IRQHandler
+  .thumb_set I2C1_ER_IRQHandler,Default_Handler
+
+  .weak SPI1_IRQHandler
+  .thumb_set SPI1_IRQHandler,Default_Handler
+
+  .weak USART1_IRQHandler
+  .thumb_set USART1_IRQHandler,Default_Handler
+
+  .weak USART2_IRQHandler
+  .thumb_set USART2_IRQHandler,Default_Handler
+
+  .weak EXTI15_10_IRQHandler
+  .thumb_set EXTI15_10_IRQHandler,Default_Handler
+
+  .weak RTC_Alarm_IRQHandler
+  .thumb_set RTC_Alarm_IRQHandler,Default_Handler
+
+  .weak USBWakeUp_IRQHandler
+  .thumb_set USBWakeUp_IRQHandler,Default_Handler
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

bsp/stm32f10x_HAL/Libraries/CMSIS/Device/ST/STM32F1xx/Source/Templates/gcc/startup_stm32f102xb.s

@@ -0,0 +1,361 @@
+/**
+  *************** (C) COPYRIGHT 2017 STMicroelectronics ************************
+  * @file      startup_stm32f102xb.s
+  * @author    MCD Application Team
+  * @version   V4.2.0
+  * @date      31-March-2017
+  * @brief     STM32F102xB Value Line Devices vector table for Atollic toolchain.
+  *            This module performs:
+  *                - Set the initial SP
+  *                - Set the initial PC == Reset_Handler,
+  *                - Set the vector table entries with the exceptions ISR address
+  *                - Configure the clock system   
+  *                - Branches to main in the C library (which eventually
+  *                  calls main()).
+  *            After Reset the Cortex-M3 processor is in Thread mode,
+  *            priority is Privileged, and the Stack is set to Main.
+  ******************************************************************************
+  *
+  * <h2><center>&copy; COPYRIGHT(c) 2017 STMicroelectronics</center></h2>
+  *
+  * Redistribution and use in source and binary forms, with or without modification,
+  * are permitted provided that the following conditions are met:
+  *   1. Redistributions of source code must retain the above copyright notice,
+  *      this list of conditions and the following disclaimer.
+  *   2. Redistributions in binary form must reproduce the above copyright notice,
+  *      this list of conditions and the following disclaimer in the documentation
+  *      and/or other materials provided with the distribution.
+  *   3. Neither the name of STMicroelectronics nor the names of its contributors
+  *      may be used to endorse or promote products derived from this software
+  *      without specific prior written permission.
+  *
+  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+  * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+  * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+  * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+  * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+  * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+  * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+  *
+  ******************************************************************************
+  */
+
+  .syntax unified
+  .cpu cortex-m3
+  .fpu softvfp
+  .thumb
+
+.global g_pfnVectors
+.global Default_Handler
+
+/* start address for the initialization values of the .data section.
+defined in linker script */
+.word _sidata
+/* start address for the .data section. defined in linker script */
+.word _sdata
+/* end address for the .data section. defined in linker script */
+.word _edata
+/* start address for the .bss section. defined in linker script */
+.word _sbss
+/* end address for the .bss section. defined in linker script */
+.word _ebss
+
+.equ  BootRAM, 0xF108F85F
+/**
+ * @brief  This is the code that gets called when the processor first
+ *          starts execution following a reset event. Only the absolutely
+ *          necessary set is performed, after which the application
+ *          supplied main() routine is called.
+ * @param  None
+ * @retval : None
+*/
+
+  .section .text.Reset_Handler
+  .weak Reset_Handler
+  .type Reset_Handler, %function
+Reset_Handler:
+
+/* Copy the data segment initializers from flash to SRAM */
+  movs r1, #0
+  b LoopCopyDataInit
+
+CopyDataInit:
+  ldr r3, =_sidata
+  ldr r3, [r3, r1]
+  str r3, [r0, r1]
+  adds r1, r1, #4
+
+LoopCopyDataInit:
+  ldr r0, =_sdata
+  ldr r3, =_edata
+  adds r2, r0, r1
+  cmp r2, r3
+  bcc CopyDataInit
+  ldr r2, =_sbss
+  b LoopFillZerobss
+/* Zero fill the bss segment. */
+FillZerobss:
+  movs r3, #0
+  str r3, [r2], #4
+
+LoopFillZerobss:
+  ldr r3, = _ebss
+  cmp r2, r3
+  bcc FillZerobss
+
+/* Call the clock system intitialization function.*/
+    bl  SystemInit
+/* Call static constructors */
+    bl __libc_init_array
+/* Call the application's entry point.*/
+  bl main
+  bx lr
+.size Reset_Handler, .-Reset_Handler
+
+/**
+ * @brief  This is the code that gets called when the processor receives an
+ *         unexpected interrupt.  This simply enters an infinite loop, preserving
+ *         the system state for examination by a debugger.
+ *
+ * @param  None
+ * @retval : None
+*/
+    .section .text.Default_Handler,"ax",%progbits
+Default_Handler:
+Infinite_Loop:
+  b Infinite_Loop
+  .size Default_Handler, .-Default_Handler
+/******************************************************************************
+*
+* The minimal vector table for a Cortex M3.  Note that the proper constructs
+* must be placed on this to ensure that it ends up at physical address
+* 0x0000.0000.
+*
+******************************************************************************/
+  .section .isr_vector,"a",%progbits
+  .type g_pfnVectors, %object
+  .size g_pfnVectors, .-g_pfnVectors
+
+
+g_pfnVectors:
+
+  .word _estack
+  .word Reset_Handler
+  .word NMI_Handler
+  .word HardFault_Handler
+  .word MemManage_Handler
+  .word BusFault_Handler
+  .word UsageFault_Handler
+  .word 0
+  .word 0
+  .word 0
+  .word 0
+  .word SVC_Handler
+  .word DebugMon_Handler
+  .word 0
+  .word PendSV_Handler
+  .word SysTick_Handler
+  .word WWDG_IRQHandler
+  .word PVD_IRQHandler
+  .word TAMPER_IRQHandler
+  .word RTC_IRQHandler
+  .word FLASH_IRQHandler
+  .word RCC_IRQHandler
+  .word EXTI0_IRQHandler
+  .word EXTI1_IRQHandler
+  .word EXTI2_IRQHandler
+  .word EXTI3_IRQHandler
+  .word EXTI4_IRQHandler
+  .word DMA1_Channel1_IRQHandler
+  .word DMA1_Channel2_IRQHandler
+  .word DMA1_Channel3_IRQHandler
+  .word DMA1_Channel4_IRQHandler
+  .word DMA1_Channel5_IRQHandler
+  .word DMA1_Channel6_IRQHandler
+  .word DMA1_Channel7_IRQHandler
+  .word ADC1_IRQHandler
+  .word USB_HP_IRQHandler
+  .word USB_LP_IRQHandler
+  .word 0 
+  .word 0
+  .word EXTI9_5_IRQHandler
+  .word 0
+  .word 0
+  .word 0
+  .word 0
+  .word TIM2_IRQHandler
+  .word TIM3_IRQHandler
+  .word TIM4_IRQHandler
+  .word I2C1_EV_IRQHandler
+  .word I2C1_ER_IRQHandler
+  .word I2C2_EV_IRQHandler
+  .word I2C2_ER_IRQHandler
+  .word SPI1_IRQHandler
+  .word SPI2_IRQHandler
+  .word USART1_IRQHandler
+  .word USART2_IRQHandler
+  .word USART3_IRQHandler
+  .word EXTI15_10_IRQHandler
+  .word RTC_Alarm_IRQHandler
+  .word USBWakeUp_IRQHandler
+  .word 0
+  .word 0
+  .word 0
+  .word 0
+  .word 0
+  .word 0
+  .word 0
+  .word BootRAM          /* @0x108. This is for boot in RAM mode for
+                            STM32F10x Medium Density devices. */
+
+/*******************************************************************************
+*
+* Provide weak aliases for each Exception handler to the Default_Handler.
+* As they are weak aliases, any function with the same name will override
+* this definition.
+*
+*******************************************************************************/
+
+  .weak NMI_Handler
+  .thumb_set NMI_Handler,Default_Handler
+
+  .weak HardFault_Handler
+  .thumb_set HardFault_Handler,Default_Handler
+
+  .weak MemManage_Handler
+  .thumb_set MemManage_Handler,Default_Handler
+
+  .weak BusFault_Handler
+  .thumb_set BusFault_Handler,Default_Handler
+
+  .weak UsageFault_Handler
+  .thumb_set UsageFault_Handler,Default_Handler
+
+  .weak SVC_Handler
+  .thumb_set SVC_Handler,Default_Handler
+
+  .weak DebugMon_Handler
+  .thumb_set DebugMon_Handler,Default_Handler
+
+  .weak PendSV_Handler
+  .thumb_set PendSV_Handler,Default_Handler
+
+  .weak SysTick_Handler
+  .thumb_set SysTick_Handler,Default_Handler
+
+  .weak WWDG_IRQHandler
+  .thumb_set WWDG_IRQHandler,Default_Handler
+
+  .weak PVD_IRQHandler
+  .thumb_set PVD_IRQHandler,Default_Handler
+
+  .weak TAMPER_IRQHandler
+  .thumb_set TAMPER_IRQHandler,Default_Handler
+
+  .weak RTC_IRQHandler
+  .thumb_set RTC_IRQHandler,Default_Handler
+
+  .weak FLASH_IRQHandler
+  .thumb_set FLASH_IRQHandler,Default_Handler
+
+  .weak RCC_IRQHandler
+  .thumb_set RCC_IRQHandler,Default_Handler
+
+  .weak EXTI0_IRQHandler
+  .thumb_set EXTI0_IRQHandler,Default_Handler
+
+  .weak EXTI1_IRQHandler
+  .thumb_set EXTI1_IRQHandler,Default_Handler
+
+  .weak EXTI2_IRQHandler
+  .thumb_set EXTI2_IRQHandler,Default_Handler
+
+  .weak EXTI3_IRQHandler
+  .thumb_set EXTI3_IRQHandler,Default_Handler
+
+  .weak EXTI4_IRQHandler
+  .thumb_set EXTI4_IRQHandler,Default_Handler
+
+  .weak DMA1_Channel1_IRQHandler
+  .thumb_set DMA1_Channel1_IRQHandler,Default_Handler
+
+  .weak DMA1_Channel2_IRQHandler
+  .thumb_set DMA1_Channel2_IRQHandler,Default_Handler
+
+  .weak DMA1_Channel3_IRQHandler
+  .thumb_set DMA1_Channel3_IRQHandler,Default_Handler
+
+  .weak DMA1_Channel4_IRQHandler
+  .thumb_set DMA1_Channel4_IRQHandler,Default_Handler
+
+  .weak DMA1_Channel5_IRQHandler
+  .thumb_set DMA1_Channel5_IRQHandler,Default_Handler
+
+  .weak DMA1_Channel6_IRQHandler
+  .thumb_set DMA1_Channel6_IRQHandler,Default_Handler
+
+  .weak DMA1_Channel7_IRQHandler
+  .thumb_set DMA1_Channel7_IRQHandler,Default_Handler
+
+  .weak  ADC1_IRQHandler
+  .thumb_set ADC1_IRQHandler,Default_Handler
+
+  .weak USB_HP_IRQHandler
+  .thumb_set USB_HP_IRQHandler,Default_Handler
+
+  .weak USB_LP_IRQHandler
+  .thumb_set USB_LP_IRQHandler,Default_Handler
+
+  .weak EXTI9_5_IRQHandler
+  .thumb_set EXTI9_5_IRQHandler,Default_Handler
+
+  .weak TIM2_IRQHandler
+  .thumb_set TIM2_IRQHandler,Default_Handler
+
+  .weak TIM3_IRQHandler
+  .thumb_set TIM3_IRQHandler,Default_Handler
+
+  .weak TIM4_IRQHandler
+  .thumb_set TIM4_IRQHandler,Default_Handler
+
+  .weak I2C1_EV_IRQHandler
+  .thumb_set I2C1_EV_IRQHandler,Default_Handler
+
+  .weak I2C1_ER_IRQHandler
+  .thumb_set I2C1_ER_IRQHandler,Default_Handler
+
+  .weak I2C2_EV_IRQHandler
+  .thumb_set I2C2_EV_IRQHandler,Default_Handler
+
+  .weak I2C2_ER_IRQHandler
+  .thumb_set I2C2_ER_IRQHandler,Default_Handler
+
+  .weak SPI1_IRQHandler
+  .thumb_set SPI1_IRQHandler,Default_Handler
+
+  .weak SPI2_IRQHandler
+  .thumb_set SPI2_IRQHandler,Default_Handler
+
+  .weak USART1_IRQHandler
+  .thumb_set USART1_IRQHandler,Default_Handler
+
+  .weak USART2_IRQHandler
+  .thumb_set USART2_IRQHandler,Default_Handler
+
+  .weak USART3_IRQHandler
+  .thumb_set USART3_IRQHandler,Default_Handler
+
+  .weak EXTI15_10_IRQHandler
+  .thumb_set EXTI15_10_IRQHandler,Default_Handler
+
+  .weak RTC_Alarm_IRQHandler
+  .thumb_set RTC_Alarm_IRQHandler,Default_Handler
+
+  .weak USBWakeUp_IRQHandler
+  .thumb_set USBWakeUp_IRQHandler,Default_Handler
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
+

bsp/stm32f10x_HAL/Libraries/CMSIS/Device/ST/STM32F1xx/Source/Templates/gcc/startup_stm32f103x6.s

@@ -0,0 +1,363 @@
+/**
+  *************** (C) COPYRIGHT 2017 STMicroelectronics ************************
+  * @file      startup_stm32f103x6.s
+  * @author    MCD Application Team
+  * @version   V4.2.0
+  * @date      31-March-2017
+  * @brief     STM32F103x6 Devices vector table for Atollic toolchain.
+  *            This module performs:
+  *                - Set the initial SP
+  *                - Set the initial PC == Reset_Handler,
+  *                - Set the vector table entries with the exceptions ISR address
+  *                - Configure the clock system   
+  *                - Branches to main in the C library (which eventually
+  *                  calls main()).
+  *            After Reset the Cortex-M3 processor is in Thread mode,
+  *            priority is Privileged, and the Stack is set to Main.
+  ******************************************************************************
+  *
+  * <h2><center>&copy; COPYRIGHT(c) 2017 STMicroelectronics</center></h2>
+  *
+  * Redistribution and use in source and binary forms, with or without modification,
+  * are permitted provided that the following conditions are met:
+  *   1. Redistributions of source code must retain the above copyright notice,
+  *      this list of conditions and the following disclaimer.
+  *   2. Redistributions in binary form must reproduce the above copyright notice,
+  *      this list of conditions and the following disclaimer in the documentation
+  *      and/or other materials provided with the distribution.
+  *   3. Neither the name of STMicroelectronics nor the names of its contributors
+  *      may be used to endorse or promote products derived from this software
+  *      without specific prior written permission.
+  *
+  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+  * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+  * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+  * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+  * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+  * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+  * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+  *
+  ******************************************************************************
+  */
+
+  .syntax unified
+  .cpu cortex-m3
+  .fpu softvfp
+  .thumb
+
+.global g_pfnVectors
+.global Default_Handler
+
+/* start address for the initialization values of the .data section.
+defined in linker script */
+.word _sidata
+/* start address for the .data section. defined in linker script */
+.word _sdata
+/* end address for the .data section. defined in linker script */
+.word _edata
+/* start address for the .bss section. defined in linker script */
+.word _sbss
+/* end address for the .bss section. defined in linker script */
+.word _ebss
+
+.equ  BootRAM, 0xF108F85F
+/**
+ * @brief  This is the code that gets called when the processor first
+ *          starts execution following a reset event. Only the absolutely
+ *          necessary set is performed, after which the application
+ *          supplied main() routine is called.
+ * @param  None
+ * @retval : None
+*/
+
+  .section .text.Reset_Handler
+  .weak Reset_Handler
+  .type Reset_Handler, %function
+Reset_Handler:
+
+/* Copy the data segment initializers from flash to SRAM */
+  movs r1, #0
+  b LoopCopyDataInit
+
+CopyDataInit:
+  ldr r3, =_sidata
+  ldr r3, [r3, r1]
+  str r3, [r0, r1]
+  adds r1, r1, #4
+
+LoopCopyDataInit:
+  ldr r0, =_sdata
+  ldr r3, =_edata
+  adds r2, r0, r1
+  cmp r2, r3
+  bcc CopyDataInit
+  ldr r2, =_sbss
+  b LoopFillZerobss
+/* Zero fill the bss segment. */
+FillZerobss:
+  movs r3, #0
+  str r3, [r2], #4
+
+LoopFillZerobss:
+  ldr r3, = _ebss
+  cmp r2, r3
+  bcc FillZerobss
+
+/* Call the clock system intitialization function.*/
+    bl  SystemInit
+/* Call static constructors */
+    bl __libc_init_array
+/* Call the application's entry point.*/
+  bl main
+  bx lr
+.size Reset_Handler, .-Reset_Handler
+
+/**
+ * @brief  This is the code that gets called when the processor receives an
+ *         unexpected interrupt.  This simply enters an infinite loop, preserving
+ *         the system state for examination by a debugger.
+ *
+ * @param  None
+ * @retval : None
+*/
+    .section .text.Default_Handler,"ax",%progbits
+Default_Handler:
+Infinite_Loop:
+  b Infinite_Loop
+  .size Default_Handler, .-Default_Handler
+/******************************************************************************
+*
+* The minimal vector table for a Cortex M3.  Note that the proper constructs
+* must be placed on this to ensure that it ends up at physical address
+* 0x0000.0000.
+*
+******************************************************************************/
+  .section .isr_vector,"a",%progbits
+  .type g_pfnVectors, %object
+  .size g_pfnVectors, .-g_pfnVectors
+
+
+g_pfnVectors:
+
+  .word _estack
+  .word Reset_Handler
+  .word NMI_Handler
+  .word HardFault_Handler
+  .word MemManage_Handler
+  .word BusFault_Handler
+  .word UsageFault_Handler
+  .word 0
+  .word 0
+  .word 0
+  .word 0
+  .word SVC_Handler
+  .word DebugMon_Handler
+  .word 0
+  .word PendSV_Handler
+  .word SysTick_Handler
+  .word WWDG_IRQHandler
+  .word PVD_IRQHandler
+  .word TAMPER_IRQHandler
+  .word RTC_IRQHandler
+  .word FLASH_IRQHandler
+  .word RCC_IRQHandler
+  .word EXTI0_IRQHandler
+  .word EXTI1_IRQHandler
+  .word EXTI2_IRQHandler
+  .word EXTI3_IRQHandler
+  .word EXTI4_IRQHandler
+  .word DMA1_Channel1_IRQHandler
+  .word DMA1_Channel2_IRQHandler
+  .word DMA1_Channel3_IRQHandler
+  .word DMA1_Channel4_IRQHandler
+  .word DMA1_Channel5_IRQHandler
+  .word DMA1_Channel6_IRQHandler
+  .word DMA1_Channel7_IRQHandler
+  .word ADC1_2_IRQHandler
+  .word USB_HP_CAN1_TX_IRQHandler
+  .word USB_LP_CAN1_RX0_IRQHandler
+  .word CAN1_RX1_IRQHandler
+  .word CAN1_SCE_IRQHandler
+  .word EXTI9_5_IRQHandler
+  .word TIM1_BRK_IRQHandler
+  .word TIM1_UP_IRQHandler
+  .word TIM1_TRG_COM_IRQHandler
+  .word TIM1_CC_IRQHandler
+  .word TIM2_IRQHandler
+  .word TIM3_IRQHandler
+  .word 0
+  .word I2C1_EV_IRQHandler
+  .word I2C1_ER_IRQHandler
+  .word 0
+  .word 0
+  .word SPI1_IRQHandler
+  .word 0
+  .word USART1_IRQHandler
+  .word USART2_IRQHandler
+  .word 0
+  .word EXTI15_10_IRQHandler
+  .word RTC_Alarm_IRQHandler
+  .word USBWakeUp_IRQHandler
+  .word 0
+  .word 0
+  .word 0
+  .word 0
+  .word 0
+  .word 0
+  .word 0
+  .word BootRAM        /* @0x108. This is for boot in RAM mode for
+                          STM32F10x Low Density devices.*/
+
+/*******************************************************************************
+*
+* Provide weak aliases for each Exception handler to the Default_Handler.
+* As they are weak aliases, any function with the same name will override
+* this definition.
+*
+*******************************************************************************/
+
+  .weak NMI_Handler
+  .thumb_set NMI_Handler,Default_Handler
+
+  .weak HardFault_Handler
+  .thumb_set HardFault_Handler,Default_Handler
+
+  .weak MemManage_Handler
+  .thumb_set MemManage_Handler,Default_Handler
+
+  .weak BusFault_Handler
+  .thumb_set BusFault_Handler,Default_Handler
+
+  .weak UsageFault_Handler
+  .thumb_set UsageFault_Handler,Default_Handler
+
+  .weak SVC_Handler
+  .thumb_set SVC_Handler,Default_Handler
+
+  .weak DebugMon_Handler
+  .thumb_set DebugMon_Handler,Default_Handler
+
+  .weak PendSV_Handler
+  .thumb_set PendSV_Handler,Default_Handler
+
+  .weak SysTick_Handler
+  .thumb_set SysTick_Handler,Default_Handler
+
+  .weak WWDG_IRQHandler
+  .thumb_set WWDG_IRQHandler,Default_Handler
+
+  .weak PVD_IRQHandler
+  .thumb_set PVD_IRQHandler,Default_Handler
+
+  .weak TAMPER_IRQHandler
+  .thumb_set TAMPER_IRQHandler,Default_Handler
+
+  .weak RTC_IRQHandler
+  .thumb_set RTC_IRQHandler,Default_Handler
+
+  .weak FLASH_IRQHandler
+  .thumb_set FLASH_IRQHandler,Default_Handler
+
+  .weak RCC_IRQHandler
+  .thumb_set RCC_IRQHandler,Default_Handler
+
+  .weak EXTI0_IRQHandler
+  .thumb_set EXTI0_IRQHandler,Default_Handler
+
+  .weak EXTI1_IRQHandler
+  .thumb_set EXTI1_IRQHandler,Default_Handler
+
+  .weak EXTI2_IRQHandler
+  .thumb_set EXTI2_IRQHandler,Default_Handler
+
+  .weak EXTI3_IRQHandler
+  .thumb_set EXTI3_IRQHandler,Default_Handler
+
+  .weak EXTI4_IRQHandler
+  .thumb_set EXTI4_IRQHandler,Default_Handler
+
+  .weak DMA1_Channel1_IRQHandler
+  .thumb_set DMA1_Channel1_IRQHandler,Default_Handler
+
+  .weak DMA1_Channel2_IRQHandler
+  .thumb_set DMA1_Channel2_IRQHandler,Default_Handler
+
+  .weak DMA1_Channel3_IRQHandler
+  .thumb_set DMA1_Channel3_IRQHandler,Default_Handler
+
+  .weak DMA1_Channel4_IRQHandler
+  .thumb_set DMA1_Channel4_IRQHandler,Default_Handler
+
+  .weak DMA1_Channel5_IRQHandler
+  .thumb_set DMA1_Channel5_IRQHandler,Default_Handler
+
+  .weak DMA1_Channel6_IRQHandler
+  .thumb_set DMA1_Channel6_IRQHandler,Default_Handler
+
+  .weak DMA1_Channel7_IRQHandler
+  .thumb_set DMA1_Channel7_IRQHandler,Default_Handler
+
+  .weak ADC1_2_IRQHandler
+  .thumb_set ADC1_2_IRQHandler,Default_Handler
+
+  .weak USB_HP_CAN1_TX_IRQHandler
+  .thumb_set USB_HP_CAN1_TX_IRQHandler,Default_Handler
+
+  .weak USB_LP_CAN1_RX0_IRQHandler
+  .thumb_set USB_LP_CAN1_RX0_IRQHandler,Default_Handler
+
+  .weak CAN1_RX1_IRQHandler
+  .thumb_set CAN1_RX1_IRQHandler,Default_Handler
+
+  .weak CAN1_SCE_IRQHandler
+  .thumb_set CAN1_SCE_IRQHandler,Default_Handler
+
+  .weak EXTI9_5_IRQHandler
+  .thumb_set EXTI9_5_IRQHandler,Default_Handler
+
+  .weak TIM1_BRK_IRQHandler
+  .thumb_set TIM1_BRK_IRQHandler,Default_Handler
+
+  .weak TIM1_UP_IRQHandler
+  .thumb_set TIM1_UP_IRQHandler,Default_Handler
+
+  .weak TIM1_TRG_COM_IRQHandler
+  .thumb_set TIM1_TRG_COM_IRQHandler,Default_Handler
+
+  .weak TIM1_CC_IRQHandler
+  .thumb_set TIM1_CC_IRQHandler,Default_Handler
+
+  .weak TIM2_IRQHandler
+  .thumb_set TIM2_IRQHandler,Default_Handler
+
+  .weak TIM3_IRQHandler
+  .thumb_set TIM3_IRQHandler,Default_Handler
+
+  .weak I2C1_EV_IRQHandler
+  .thumb_set I2C1_EV_IRQHandler,Default_Handler
+
+  .weak I2C1_ER_IRQHandler
+  .thumb_set I2C1_ER_IRQHandler,Default_Handler
+
+  .weak SPI1_IRQHandler
+  .thumb_set SPI1_IRQHandler,Default_Handler
+
+  .weak USART1_IRQHandler
+  .thumb_set USART1_IRQHandler,Default_Handler
+
+  .weak USART2_IRQHandler
+  .thumb_set USART2_IRQHandler,Default_Handler
+
+  .weak EXTI15_10_IRQHandler
+  .thumb_set EXTI15_10_IRQHandler,Default_Handler
+
+  .weak RTC_Alarm_IRQHandler
+  .thumb_set RTC_Alarm_IRQHandler,Default_Handler
+
+  .weak USBWakeUp_IRQHandler
+  .thumb_set USBWakeUp_IRQHandler,Default_Handler
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

bsp/stm32f10x_HAL/Libraries/CMSIS/Device/ST/STM32F1xx/Source/Templates/gcc/startup_stm32f103xb.s

@@ -0,0 +1,379 @@
+/**
+  *************** (C) COPYRIGHT 2017 STMicroelectronics ************************
+  * @file      startup_stm32f103xb.s
+  * @author    MCD Application Team
+  * @version   V4.2.0
+  * @date      31-March-2017
+  * @brief     STM32F103xB Devices vector table for Atollic toolchain.
+  *            This module performs:
+  *                - Set the initial SP
+  *                - Set the initial PC == Reset_Handler,
+  *                - Set the vector table entries with the exceptions ISR address
+  *                - Configure the clock system   
+  *                - Branches to main in the C library (which eventually
+  *                  calls main()).
+  *            After Reset the Cortex-M3 processor is in Thread mode,
+  *            priority is Privileged, and the Stack is set to Main.
+  ******************************************************************************
+  *
+  * <h2><center>&copy; COPYRIGHT(c) 2017 STMicroelectronics</center></h2>
+  *
+  * Redistribution and use in source and binary forms, with or without modification,
+  * are permitted provided that the following conditions are met:
+  *   1. Redistributions of source code must retain the above copyright notice,
+  *      this list of conditions and the following disclaimer.
+  *   2. Redistributions in binary form must reproduce the above copyright notice,
+  *      this list of conditions and the following disclaimer in the documentation
+  *      and/or other materials provided with the distribution.
+  *   3. Neither the name of STMicroelectronics nor the names of its contributors
+  *      may be used to endorse or promote products derived from this software
+  *      without specific prior written permission.
+  *
+  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+  * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+  * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+  * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+  * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+  * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+  * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+  *
+  ******************************************************************************
+  */
+
+  .syntax unified
+  .cpu cortex-m3
+  .fpu softvfp
+  .thumb
+
+.global g_pfnVectors
+.global Default_Handler
+
+/* start address for the initialization values of the .data section.
+defined in linker script */
+.word _sidata
+/* start address for the .data section. defined in linker script */
+.word _sdata
+/* end address for the .data section. defined in linker script */
+.word _edata
+/* start address for the .bss section. defined in linker script */
+.word _sbss
+/* end address for the .bss section. defined in linker script */
+.word _ebss
+
+.equ  BootRAM, 0xF108F85F
+/**
+ * @brief  This is the code that gets called when the processor first
+ *          starts execution following a reset event. Only the absolutely
+ *          necessary set is performed, after which the application
+ *          supplied main() routine is called.
+ * @param  None
+ * @retval : None
+*/
+
+  .section .text.Reset_Handler
+  .weak Reset_Handler
+  .type Reset_Handler, %function
+Reset_Handler:
+
+/* Copy the data segment initializers from flash to SRAM */
+  movs r1, #0
+  b LoopCopyDataInit
+
+CopyDataInit:
+  ldr r3, =_sidata
+  ldr r3, [r3, r1]
+  str r3, [r0, r1]
+  adds r1, r1, #4
+
+LoopCopyDataInit:
+  ldr r0, =_sdata
+  ldr r3, =_edata
+  adds r2, r0, r1
+  cmp r2, r3
+  bcc CopyDataInit
+  ldr r2, =_sbss
+  b LoopFillZerobss
+/* Zero fill the bss segment. */
+FillZerobss:
+  movs r3, #0
+  str r3, [r2], #4
+
+LoopFillZerobss:
+  ldr r3, = _ebss
+  cmp r2, r3
+  bcc FillZerobss
+
+/* Call the clock system intitialization function.*/
+    bl  SystemInit
+/* Call static constructors */
+    bl __libc_init_array
+/* Call the application's entry point.*/
+  bl main
+  bx lr
+.size Reset_Handler, .-Reset_Handler
+
+/**
+ * @brief  This is the code that gets called when the processor receives an
+ *         unexpected interrupt.  This simply enters an infinite loop, preserving
+ *         the system state for examination by a debugger.
+ *
+ * @param  None
+ * @retval : None
+*/
+    .section .text.Default_Handler,"ax",%progbits
+Default_Handler:
+Infinite_Loop:
+  b Infinite_Loop
+  .size Default_Handler, .-Default_Handler
+/******************************************************************************
+*
+* The minimal vector table for a Cortex M3.  Note that the proper constructs
+* must be placed on this to ensure that it ends up at physical address
+* 0x0000.0000.
+*
+******************************************************************************/
+  .section .isr_vector,"a",%progbits
+  .type g_pfnVectors, %object
+  .size g_pfnVectors, .-g_pfnVectors
+
+
+g_pfnVectors:
+
+  .word _estack
+  .word Reset_Handler
+  .word NMI_Handler
+  .word HardFault_Handler
+  .word MemManage_Handler
+  .word BusFault_Handler
+  .word UsageFault_Handler
+  .word 0
+  .word 0
+  .word 0
+  .word 0
+  .word SVC_Handler
+  .word DebugMon_Handler
+  .word 0
+  .word PendSV_Handler
+  .word SysTick_Handler
+  .word WWDG_IRQHandler
+  .word PVD_IRQHandler
+  .word TAMPER_IRQHandler
+  .word RTC_IRQHandler
+  .word FLASH_IRQHandler
+  .word RCC_IRQHandler
+  .word EXTI0_IRQHandler
+  .word EXTI1_IRQHandler
+  .word EXTI2_IRQHandler
+  .word EXTI3_IRQHandler
+  .word EXTI4_IRQHandler
+  .word DMA1_Channel1_IRQHandler
+  .word DMA1_Channel2_IRQHandler
+  .word DMA1_Channel3_IRQHandler
+  .word DMA1_Channel4_IRQHandler
+  .word DMA1_Channel5_IRQHandler
+  .word DMA1_Channel6_IRQHandler
+  .word DMA1_Channel7_IRQHandler
+  .word ADC1_2_IRQHandler
+  .word USB_HP_CAN1_TX_IRQHandler
+  .word USB_LP_CAN1_RX0_IRQHandler
+  .word CAN1_RX1_IRQHandler
+  .word CAN1_SCE_IRQHandler
+  .word EXTI9_5_IRQHandler
+  .word TIM1_BRK_IRQHandler
+  .word TIM1_UP_IRQHandler
+  .word TIM1_TRG_COM_IRQHandler
+  .word TIM1_CC_IRQHandler
+  .word TIM2_IRQHandler
+  .word TIM3_IRQHandler
+  .word TIM4_IRQHandler
+  .word I2C1_EV_IRQHandler
+  .word I2C1_ER_IRQHandler
+  .word I2C2_EV_IRQHandler
+  .word I2C2_ER_IRQHandler
+  .word SPI1_IRQHandler
+  .word SPI2_IRQHandler
+  .word USART1_IRQHandler
+  .word USART2_IRQHandler
+  .word USART3_IRQHandler
+  .word EXTI15_10_IRQHandler
+  .word RTC_Alarm_IRQHandler
+  .word USBWakeUp_IRQHandler
+  .word 0
+  .word 0
+  .word 0
+  .word 0
+  .word 0
+  .word 0
+  .word 0
+  .word BootRAM          /* @0x108. This is for boot in RAM mode for
+                            STM32F10x Medium Density devices. */
+
+/*******************************************************************************
+*
+* Provide weak aliases for each Exception handler to the Default_Handler.
+* As they are weak aliases, any function with the same name will override
+* this definition.
+*
+*******************************************************************************/
+
+  .weak NMI_Handler
+  .thumb_set NMI_Handler,Default_Handler
+
+  .weak HardFault_Handler
+  .thumb_set HardFault_Handler,Default_Handler
+
+  .weak MemManage_Handler
+  .thumb_set MemManage_Handler,Default_Handler
+
+  .weak BusFault_Handler
+  .thumb_set BusFault_Handler,Default_Handler
+
+  .weak UsageFault_Handler
+  .thumb_set UsageFault_Handler,Default_Handler
+
+  .weak SVC_Handler
+  .thumb_set SVC_Handler,Default_Handler
+
+  .weak DebugMon_Handler
+  .thumb_set DebugMon_Handler,Default_Handler
+
+  .weak PendSV_Handler
+  .thumb_set PendSV_Handler,Default_Handler
+
+  .weak SysTick_Handler
+  .thumb_set SysTick_Handler,Default_Handler
+
+  .weak WWDG_IRQHandler
+  .thumb_set WWDG_IRQHandler,Default_Handler
+
+  .weak PVD_IRQHandler
+  .thumb_set PVD_IRQHandler,Default_Handler
+
+  .weak TAMPER_IRQHandler
+  .thumb_set TAMPER_IRQHandler,Default_Handler
+
+  .weak RTC_IRQHandler
+  .thumb_set RTC_IRQHandler,Default_Handler
+
+  .weak FLASH_IRQHandler
+  .thumb_set FLASH_IRQHandler,Default_Handler
+
+  .weak RCC_IRQHandler
+  .thumb_set RCC_IRQHandler,Default_Handler
+
+  .weak EXTI0_IRQHandler
+  .thumb_set EXTI0_IRQHandler,Default_Handler
+
+  .weak EXTI1_IRQHandler
+  .thumb_set EXTI1_IRQHandler,Default_Handler
+
+  .weak EXTI2_IRQHandler
+  .thumb_set EXTI2_IRQHandler,Default_Handler
+
+  .weak EXTI3_IRQHandler
+  .thumb_set EXTI3_IRQHandler,Default_Handler
+
+  .weak EXTI4_IRQHandler
+  .thumb_set EXTI4_IRQHandler,Default_Handler
+
+  .weak DMA1_Channel1_IRQHandler
+  .thumb_set DMA1_Channel1_IRQHandler,Default_Handler
+
+  .weak DMA1_Channel2_IRQHandler
+  .thumb_set DMA1_Channel2_IRQHandler,Default_Handler
+
+  .weak DMA1_Channel3_IRQHandler
+  .thumb_set DMA1_Channel3_IRQHandler,Default_Handler
+
+  .weak DMA1_Channel4_IRQHandler
+  .thumb_set DMA1_Channel4_IRQHandler,Default_Handler
+
+  .weak DMA1_Channel5_IRQHandler
+  .thumb_set DMA1_Channel5_IRQHandler,Default_Handler
+
+  .weak DMA1_Channel6_IRQHandler
+  .thumb_set DMA1_Channel6_IRQHandler,Default_Handler
+
+  .weak DMA1_Channel7_IRQHandler
+  .thumb_set DMA1_Channel7_IRQHandler,Default_Handler
+
+  .weak ADC1_2_IRQHandler
+  .thumb_set ADC1_2_IRQHandler,Default_Handler
+
+  .weak USB_HP_CAN1_TX_IRQHandler
+  .thumb_set USB_HP_CAN1_TX_IRQHandler,Default_Handler
+
+  .weak USB_LP_CAN1_RX0_IRQHandler
+  .thumb_set USB_LP_CAN1_RX0_IRQHandler,Default_Handler
+
+  .weak CAN1_RX1_IRQHandler
+  .thumb_set CAN1_RX1_IRQHandler,Default_Handler
+
+  .weak CAN1_SCE_IRQHandler
+  .thumb_set CAN1_SCE_IRQHandler,Default_Handler
+
+  .weak EXTI9_5_IRQHandler
+  .thumb_set EXTI9_5_IRQHandler,Default_Handler
+
+  .weak TIM1_BRK_IRQHandler
+  .thumb_set TIM1_BRK_IRQHandler,Default_Handler
+
+  .weak TIM1_UP_IRQHandler
+  .thumb_set TIM1_UP_IRQHandler,Default_Handler
+
+  .weak TIM1_TRG_COM_IRQHandler
+  .thumb_set TIM1_TRG_COM_IRQHandler,Default_Handler
+
+  .weak TIM1_CC_IRQHandler
+  .thumb_set TIM1_CC_IRQHandler,Default_Handler
+
+  .weak TIM2_IRQHandler
+  .thumb_set TIM2_IRQHandler,Default_Handler
+
+  .weak TIM3_IRQHandler
+  .thumb_set TIM3_IRQHandler,Default_Handler
+
+  .weak TIM4_IRQHandler
+  .thumb_set TIM4_IRQHandler,Default_Handler
+
+  .weak I2C1_EV_IRQHandler
+  .thumb_set I2C1_EV_IRQHandler,Default_Handler
+
+  .weak I2C1_ER_IRQHandler
+  .thumb_set I2C1_ER_IRQHandler,Default_Handler
+
+  .weak I2C2_EV_IRQHandler
+  .thumb_set I2C2_EV_IRQHandler,Default_Handler
+
+  .weak I2C2_ER_IRQHandler
+  .thumb_set I2C2_ER_IRQHandler,Default_Handler
+
+  .weak SPI1_IRQHandler
+  .thumb_set SPI1_IRQHandler,Default_Handler
+
+  .weak SPI2_IRQHandler
+  .thumb_set SPI2_IRQHandler,Default_Handler
+
+  .weak USART1_IRQHandler
+  .thumb_set USART1_IRQHandler,Default_Handler
+
+  .weak USART2_IRQHandler
+  .thumb_set USART2_IRQHandler,Default_Handler
+
+  .weak USART3_IRQHandler
+  .thumb_set USART3_IRQHandler,Default_Handler
+
+  .weak EXTI15_10_IRQHandler
+  .thumb_set EXTI15_10_IRQHandler,Default_Handler
+
+  .weak RTC_Alarm_IRQHandler
+  .thumb_set RTC_Alarm_IRQHandler,Default_Handler
+
+  .weak USBWakeUp_IRQHandler
+  .thumb_set USBWakeUp_IRQHandler,Default_Handler
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
+

bsp/stm32f10x_HAL/Libraries/CMSIS/Device/ST/STM32F1xx/Source/Templates/gcc/startup_stm32f103xe.s

@@ -0,0 +1,485 @@
+/**
+  *************** (C) COPYRIGHT 2017 STMicroelectronics ************************
+  * @file      startup_stm32f103xe.s
+  * @author    MCD Application Team
+  * @version   V4.2.0
+  * @date      31-March-2017
+  * @brief     STM32F103xE Devices vector table for Atollic toolchain.
+  *            This module performs:
+  *                - Set the initial SP
+  *                - Set the initial PC == Reset_Handler,
+  *                - Set the vector table entries with the exceptions ISR address
+  *                - Configure the clock system   
+  *                - Configure external SRAM mounted on STM3210E-EVAL board
+  *                  to be used as data memory (optional, to be enabled by user)
+  *                - Branches to main in the C library (which eventually
+  *                  calls main()).
+  *            After Reset the Cortex-M3 processor is in Thread mode,
+  *            priority is Privileged, and the Stack is set to Main.
+  ******************************************************************************
+  *
+  * <h2><center>&copy; COPYRIGHT(c) 2017 STMicroelectronics</center></h2>
+  *
+  * Redistribution and use in source and binary forms, with or without modification,
+  * are permitted provided that the following conditions are met:
+  *   1. Redistributions of source code must retain the above copyright notice,
+  *      this list of conditions and the following disclaimer.
+  *   2. Redistributions in binary form must reproduce the above copyright notice,
+  *      this list of conditions and the following disclaimer in the documentation
+  *      and/or other materials provided with the distribution.
+  *   3. Neither the name of STMicroelectronics nor the names of its contributors
+  *      may be used to endorse or promote products derived from this software
+  *      without specific prior written permission.
+  *
+  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+  * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+  * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+  * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+  * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+  * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+  * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+  *
+  ******************************************************************************
+  */
+
+  .syntax unified
+  .cpu cortex-m3
+  .fpu softvfp
+  .thumb
+
+.global g_pfnVectors
+.global Default_Handler
+
+/* start address for the initialization values of the .data section.
+defined in linker script */
+.word _sidata
+/* start address for the .data section. defined in linker script */
+.word _sdata
+/* end address for the .data section. defined in linker script */
+.word _edata
+/* start address for the .bss section. defined in linker script */
+.word _sbss
+/* end address for the .bss section. defined in linker script */
+.word _ebss
+
+.equ  BootRAM,        0xF1E0F85F
+/**
+ * @brief  This is the code that gets called when the processor first
+ *          starts execution following a reset event. Only the absolutely
+ *          necessary set is performed, after which the application
+ *          supplied main() routine is called.
+ * @param  None
+ * @retval : None
+*/
+
+  .section .text.Reset_Handler
+  .weak Reset_Handler
+  .type Reset_Handler, %function
+Reset_Handler:
+
+/* Copy the data segment initializers from flash to SRAM */
+  movs r1, #0
+  b LoopCopyDataInit
+
+CopyDataInit:
+  ldr r3, =_sidata
+  ldr r3, [r3, r1]
+  str r3, [r0, r1]
+  adds r1, r1, #4
+
+LoopCopyDataInit:
+  ldr r0, =_sdata
+  ldr r3, =_edata
+  adds r2, r0, r1
+  cmp r2, r3
+  bcc CopyDataInit
+  ldr r2, =_sbss
+  b LoopFillZerobss
+/* Zero fill the bss segment. */
+FillZerobss:
+  movs r3, #0
+  str r3, [r2], #4
+
+LoopFillZerobss:
+  ldr r3, = _ebss
+  cmp r2, r3
+  bcc FillZerobss
+
+/* Call the clock system intitialization function.*/
+    bl  SystemInit
+/* Call static constructors */
+    bl __libc_init_array
+/* Call the application's entry point.*/
+  bl main
+  bx lr
+.size Reset_Handler, .-Reset_Handler
+
+/**
+ * @brief  This is the code that gets called when the processor receives an
+ *         unexpected interrupt.  This simply enters an infinite loop, preserving
+ *         the system state for examination by a debugger.
+ *
+ * @param  None
+ * @retval : None
+*/
+    .section .text.Default_Handler,"ax",%progbits
+Default_Handler:
+Infinite_Loop:
+  b Infinite_Loop
+  .size Default_Handler, .-Default_Handler
+/******************************************************************************
+*
+* The minimal vector table for a Cortex M3.  Note that the proper constructs
+* must be placed on this to ensure that it ends up at physical address
+* 0x0000.0000.
+*
+******************************************************************************/
+  .section .isr_vector,"a",%progbits
+  .type g_pfnVectors, %object
+  .size g_pfnVectors, .-g_pfnVectors
+
+
+g_pfnVectors:
+
+  .word _estack
+  .word Reset_Handler
+  .word NMI_Handler
+  .word HardFault_Handler
+  .word MemManage_Handler
+  .word BusFault_Handler
+  .word UsageFault_Handler
+  .word 0
+  .word 0
+  .word 0
+  .word 0
+  .word SVC_Handler
+  .word DebugMon_Handler
+  .word 0
+  .word PendSV_Handler
+  .word SysTick_Handler
+  .word WWDG_IRQHandler
+  .word PVD_IRQHandler
+  .word TAMPER_IRQHandler
+  .word RTC_IRQHandler
+  .word FLASH_IRQHandler
+  .word RCC_IRQHandler
+  .word EXTI0_IRQHandler
+  .word EXTI1_IRQHandler
+  .word EXTI2_IRQHandler
+  .word EXTI3_IRQHandler
+  .word EXTI4_IRQHandler
+  .word DMA1_Channel1_IRQHandler
+  .word DMA1_Channel2_IRQHandler
+  .word DMA1_Channel3_IRQHandler
+  .word DMA1_Channel4_IRQHandler
+  .word DMA1_Channel5_IRQHandler
+  .word DMA1_Channel6_IRQHandler
+  .word DMA1_Channel7_IRQHandler
+  .word ADC1_2_IRQHandler
+  .word USB_HP_CAN1_TX_IRQHandler
+  .word USB_LP_CAN1_RX0_IRQHandler
+  .word CAN1_RX1_IRQHandler
+  .word CAN1_SCE_IRQHandler
+  .word EXTI9_5_IRQHandler
+  .word TIM1_BRK_IRQHandler
+  .word TIM1_UP_IRQHandler
+  .word TIM1_TRG_COM_IRQHandler
+  .word TIM1_CC_IRQHandler
+  .word TIM2_IRQHandler
+  .word TIM3_IRQHandler
+  .word TIM4_IRQHandler
+  .word I2C1_EV_IRQHandler
+  .word I2C1_ER_IRQHandler
+  .word I2C2_EV_IRQHandler
+  .word I2C2_ER_IRQHandler
+  .word SPI1_IRQHandler
+  .word SPI2_IRQHandler
+  .word USART1_IRQHandler
+  .word USART2_IRQHandler
+  .word USART3_IRQHandler
+  .word EXTI15_10_IRQHandler
+  .word RTC_Alarm_IRQHandler
+  .word USBWakeUp_IRQHandler
+  .word TIM8_BRK_IRQHandler
+  .word TIM8_UP_IRQHandler
+  .word TIM8_TRG_COM_IRQHandler
+  .word TIM8_CC_IRQHandler
+  .word ADC3_IRQHandler
+  .word FSMC_IRQHandler
+  .word SDIO_IRQHandler
+  .word TIM5_IRQHandler
+  .word SPI3_IRQHandler
+  .word UART4_IRQHandler
+  .word UART5_IRQHandler
+  .word TIM6_IRQHandler
+  .word TIM7_IRQHandler
+  .word DMA2_Channel1_IRQHandler
+  .word DMA2_Channel2_IRQHandler
+  .word DMA2_Channel3_IRQHandler
+  .word DMA2_Channel4_5_IRQHandler
+  .word 0
+  .word 0
+  .word 0
+  .word 0
+  .word 0
+  .word 0
+  .word 0
+  .word 0
+  .word 0
+  .word 0
+  .word 0
+  .word 0
+  .word 0
+  .word 0
+  .word 0
+  .word 0
+  .word 0
+  .word 0
+  .word 0
+  .word 0
+  .word 0
+  .word 0
+  .word 0
+  .word 0
+  .word 0
+  .word 0
+  .word 0
+  .word 0
+  .word 0
+  .word 0
+  .word 0
+  .word 0
+  .word 0
+  .word 0
+  .word 0
+  .word 0
+  .word 0
+  .word 0
+  .word 0
+  .word 0
+  .word 0
+  .word 0
+  .word 0
+  .word 0
+  .word BootRAM       /* @0x1E0. This is for boot in RAM mode for
+                         STM32F10x High Density devices. */
+
+/*******************************************************************************
+*
+* Provide weak aliases for each Exception handler to the Default_Handler.
+* As they are weak aliases, any function with the same name will override
+* this definition.
+*
+*******************************************************************************/
+
+  .weak NMI_Handler
+  .thumb_set NMI_Handler,Default_Handler
+
+  .weak HardFault_Handler
+  .thumb_set HardFault_Handler,Default_Handler
+
+  .weak MemManage_Handler
+  .thumb_set MemManage_Handler,Default_Handler
+
+  .weak BusFault_Handler
+  .thumb_set BusFault_Handler,Default_Handler
+
+  .weak UsageFault_Handler
+  .thumb_set UsageFault_Handler,Default_Handler
+
+  .weak SVC_Handler
+  .thumb_set SVC_Handler,Default_Handler
+
+  .weak DebugMon_Handler
+  .thumb_set DebugMon_Handler,Default_Handler
+
+  .weak PendSV_Handler
+  .thumb_set PendSV_Handler,Default_Handler
+
+  .weak SysTick_Handler
+  .thumb_set SysTick_Handler,Default_Handler
+
+  .weak WWDG_IRQHandler
+  .thumb_set WWDG_IRQHandler,Default_Handler
+
+  .weak PVD_IRQHandler
+  .thumb_set PVD_IRQHandler,Default_Handler
+
+  .weak TAMPER_IRQHandler
+  .thumb_set TAMPER_IRQHandler,Default_Handler
+
+  .weak RTC_IRQHandler
+  .thumb_set RTC_IRQHandler,Default_Handler
+
+  .weak FLASH_IRQHandler
+  .thumb_set FLASH_IRQHandler,Default_Handler
+
+  .weak RCC_IRQHandler
+  .thumb_set RCC_IRQHandler,Default_Handler
+
+  .weak EXTI0_IRQHandler
+  .thumb_set EXTI0_IRQHandler,Default_Handler
+
+  .weak EXTI1_IRQHandler
+  .thumb_set EXTI1_IRQHandler,Default_Handler
+
+  .weak EXTI2_IRQHandler
+  .thumb_set EXTI2_IRQHandler,Default_Handler
+
+  .weak EXTI3_IRQHandler
+  .thumb_set EXTI3_IRQHandler,Default_Handler
+
+  .weak EXTI4_IRQHandler
+  .thumb_set EXTI4_IRQHandler,Default_Handler
+
+  .weak DMA1_Channel1_IRQHandler
+  .thumb_set DMA1_Channel1_IRQHandler,Default_Handler
+
+  .weak DMA1_Channel2_IRQHandler
+  .thumb_set DMA1_Channel2_IRQHandler,Default_Handler
+
+  .weak DMA1_Channel3_IRQHandler
+  .thumb_set DMA1_Channel3_IRQHandler,Default_Handler
+
+  .weak DMA1_Channel4_IRQHandler
+  .thumb_set DMA1_Channel4_IRQHandler,Default_Handler
+
+  .weak DMA1_Channel5_IRQHandler
+  .thumb_set DMA1_Channel5_IRQHandler,Default_Handler
+
+  .weak DMA1_Channel6_IRQHandler
+  .thumb_set DMA1_Channel6_IRQHandler,Default_Handler
+
+  .weak DMA1_Channel7_IRQHandler
+  .thumb_set DMA1_Channel7_IRQHandler,Default_Handler
+
+  .weak ADC1_2_IRQHandler
+  .thumb_set ADC1_2_IRQHandler,Default_Handler
+
+  .weak USB_HP_CAN1_TX_IRQHandler
+  .thumb_set USB_HP_CAN1_TX_IRQHandler,Default_Handler
+
+  .weak USB_LP_CAN1_RX0_IRQHandler
+  .thumb_set USB_LP_CAN1_RX0_IRQHandler,Default_Handler
+
+  .weak CAN1_RX1_IRQHandler
+  .thumb_set CAN1_RX1_IRQHandler,Default_Handler
+
+  .weak CAN1_SCE_IRQHandler
+  .thumb_set CAN1_SCE_IRQHandler,Default_Handler
+
+  .weak EXTI9_5_IRQHandler
+  .thumb_set EXTI9_5_IRQHandler,Default_Handler
+
+  .weak TIM1_BRK_IRQHandler
+  .thumb_set TIM1_BRK_IRQHandler,Default_Handler
+
+  .weak TIM1_UP_IRQHandler
+  .thumb_set TIM1_UP_IRQHandler,Default_Handler
+
+  .weak TIM1_TRG_COM_IRQHandler
+  .thumb_set TIM1_TRG_COM_IRQHandler,Default_Handler
+
+  .weak TIM1_CC_IRQHandler
+  .thumb_set TIM1_CC_IRQHandler,Default_Handler
+
+  .weak TIM2_IRQHandler
+  .thumb_set TIM2_IRQHandler,Default_Handler
+
+  .weak TIM3_IRQHandler
+  .thumb_set TIM3_IRQHandler,Default_Handler
+
+  .weak TIM4_IRQHandler
+  .thumb_set TIM4_IRQHandler,Default_Handler
+
+  .weak I2C1_EV_IRQHandler
+  .thumb_set I2C1_EV_IRQHandler,Default_Handler
+
+  .weak I2C1_ER_IRQHandler
+  .thumb_set I2C1_ER_IRQHandler,Default_Handler
+
+  .weak I2C2_EV_IRQHandler
+  .thumb_set I2C2_EV_IRQHandler,Default_Handler
+
+  .weak I2C2_ER_IRQHandler
+  .thumb_set I2C2_ER_IRQHandler,Default_Handler
+
+  .weak SPI1_IRQHandler
+  .thumb_set SPI1_IRQHandler,Default_Handler
+
+  .weak SPI2_IRQHandler
+  .thumb_set SPI2_IRQHandler,Default_Handler
+
+  .weak USART1_IRQHandler
+  .thumb_set USART1_IRQHandler,Default_Handler
+
+  .weak USART2_IRQHandler
+  .thumb_set USART2_IRQHandler,Default_Handler
+
+  .weak USART3_IRQHandler
+  .thumb_set USART3_IRQHandler,Default_Handler
+
+  .weak EXTI15_10_IRQHandler
+  .thumb_set EXTI15_10_IRQHandler,Default_Handler
+
+  .weak RTC_Alarm_IRQHandler
+  .thumb_set RTC_Alarm_IRQHandler,Default_Handler
+
+  .weak USBWakeUp_IRQHandler
+  .thumb_set USBWakeUp_IRQHandler,Default_Handler
+
+  .weak TIM8_BRK_IRQHandler
+  .thumb_set TIM8_BRK_IRQHandler,Default_Handler
+
+  .weak TIM8_UP_IRQHandler
+  .thumb_set TIM8_UP_IRQHandler,Default_Handler
+
+  .weak TIM8_TRG_COM_IRQHandler
+  .thumb_set TIM8_TRG_COM_IRQHandler,Default_Handler
+
+  .weak TIM8_CC_IRQHandler
+  .thumb_set TIM8_CC_IRQHandler,Default_Handler
+
+  .weak ADC3_IRQHandler
+  .thumb_set ADC3_IRQHandler,Default_Handler
+
+  .weak FSMC_IRQHandler
+  .thumb_set FSMC_IRQHandler,Default_Handler
+
+  .weak SDIO_IRQHandler
+  .thumb_set SDIO_IRQHandler,Default_Handler
+
+  .weak TIM5_IRQHandler
+  .thumb_set TIM5_IRQHandler,Default_Handler
+
+  .weak SPI3_IRQHandler
+  .thumb_set SPI3_IRQHandler,Default_Handler
+
+  .weak UART4_IRQHandler
+  .thumb_set UART4_IRQHandler,Default_Handler
+
+  .weak UART5_IRQHandler
+  .thumb_set UART5_IRQHandler,Default_Handler
+
+  .weak TIM6_IRQHandler
+  .thumb_set TIM6_IRQHandler,Default_Handler
+
+  .weak TIM7_IRQHandler
+  .thumb_set TIM7_IRQHandler,Default_Handler
+
+  .weak DMA2_Channel1_IRQHandler
+  .thumb_set DMA2_Channel1_IRQHandler,Default_Handler
+
+  .weak DMA2_Channel2_IRQHandler
+  .thumb_set DMA2_Channel2_IRQHandler,Default_Handler
+
+  .weak DMA2_Channel3_IRQHandler
+  .thumb_set DMA2_Channel3_IRQHandler,Default_Handler
+
+  .weak DMA2_Channel4_5_IRQHandler
+  .thumb_set DMA2_Channel4_5_IRQHandler,Default_Handler
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

bsp/stm32f10x_HAL/Libraries/CMSIS/Device/ST/STM32F1xx/Source/Templates/gcc/startup_stm32f103xg.s

@@ -0,0 +1,482 @@
+/**
+  *************** (C) COPYRIGHT 2017 STMicroelectronics ************************
+  * @file      startup_stm32f103xb.s
+  * @author    MCD Application Team
+  * @version   V4.2.0
+  * @date      31-March-2017
+  * @brief     STM32F103xB Devices vector table for Atollic toolchain.
+  *            This module performs:
+  *                - Set the initial SP
+  *                - Set the initial PC == Reset_Handler,
+  *                - Set the vector table entries with the exceptions ISR address
+  *                - Configure the clock system   
+  *                - Branches to main in the C library (which eventually
+  *                  calls main()).
+  *            After Reset the Cortex-M3 processor is in Thread mode,
+  *            priority is Privileged, and the Stack is set to Main.
+  ******************************************************************************
+  *
+  * <h2><center>&copy; COPYRIGHT(c) 2017 STMicroelectronics</center></h2>
+  *
+  * Redistribution and use in source and binary forms, with or without modification,
+  * are permitted provided that the following conditions are met:
+  *   1. Redistributions of source code must retain the above copyright notice,
+  *      this list of conditions and the following disclaimer.
+  *   2. Redistributions in binary form must reproduce the above copyright notice,
+  *      this list of conditions and the following disclaimer in the documentation
+  *      and/or other materials provided with the distribution.
+  *   3. Neither the name of STMicroelectronics nor the names of its contributors
+  *      may be used to endorse or promote products derived from this software
+  *      without specific prior written permission.
+  *
+  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+  * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+  * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+  * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+  * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+  * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+  * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+  *
+  ******************************************************************************
+  */
+
+  .syntax unified
+  .cpu cortex-m3
+  .fpu softvfp
+  .thumb
+
+.global g_pfnVectors
+.global Default_Handler
+
+/* start address for the initialization values of the .data section.
+defined in linker script */
+.word _sidata
+/* start address for the .data section. defined in linker script */
+.word _sdata
+/* end address for the .data section. defined in linker script */
+.word _edata
+/* start address for the .bss section. defined in linker script */
+.word _sbss
+/* end address for the .bss section. defined in linker script */
+.word _ebss
+
+.equ  BootRAM,        0xF1E0F85F
+/**
+ * @brief  This is the code that gets called when the processor first
+ *          starts execution following a reset event. Only the absolutely
+ *          necessary set is performed, after which the application
+ *          supplied main() routine is called.
+ * @param  None
+ * @retval : None
+*/
+
+  .section .text.Reset_Handler
+  .weak Reset_Handler
+  .type Reset_Handler, %function
+Reset_Handler:
+
+/* Copy the data segment initializers from flash to SRAM */
+  movs r1, #0
+  b LoopCopyDataInit
+
+CopyDataInit:
+  ldr r3, =_sidata
+  ldr r3, [r3, r1]
+  str r3, [r0, r1]
+  adds r1, r1, #4
+
+LoopCopyDataInit:
+  ldr r0, =_sdata
+  ldr r3, =_edata
+  adds r2, r0, r1
+  cmp r2, r3
+  bcc CopyDataInit
+  ldr r2, =_sbss
+  b LoopFillZerobss
+
+/* Zero fill the bss segment. */
+FillZerobss:
+  movs r3, #0
+  str r3, [r2], #4
+
+LoopFillZerobss:
+  ldr r3, = _ebss
+  cmp r2, r3
+  bcc FillZerobss
+
+/* Call the clock system intitialization function.*/
+    bl  SystemInit
+/* Call static constructors */
+    bl __libc_init_array
+/* Call the application's entry point.*/
+  bl main
+  bx lr
+.size Reset_Handler, .-Reset_Handler
+
+/**
+ * @brief  This is the code that gets called when the processor receives an
+ *         unexpected interrupt.  This simply enters an infinite loop, preserving
+ *         the system state for examination by a debugger.
+ * @param  None
+ * @retval None       
+*/
+    .section .text.Default_Handler,"ax",%progbits
+Default_Handler:
+Infinite_Loop:
+  b Infinite_Loop
+  .size Default_Handler, .-Default_Handler
+/******************************************************************************
+*
+* The minimal vector table for a Cortex M3.  Note that the proper constructs
+* must be placed on this to ensure that it ends up at physical address
+* 0x0000.0000.
+*
+*******************************************************************************/
+  .section .isr_vector,"a",%progbits
+  .type g_pfnVectors, %object
+  .size g_pfnVectors, .-g_pfnVectors
+
+
+g_pfnVectors:
+
+  .word  _estack
+  .word  Reset_Handler
+  .word  NMI_Handler
+  .word  HardFault_Handler
+  .word  MemManage_Handler
+  .word  BusFault_Handler
+  .word  UsageFault_Handler
+  .word  0
+  .word  0
+  .word  0
+  .word  0
+  .word  SVC_Handler
+  .word  DebugMon_Handler
+  .word  0
+  .word  PendSV_Handler
+  .word  SysTick_Handler
+  .word  WWDG_IRQHandler
+  .word  PVD_IRQHandler
+  .word  TAMPER_IRQHandler
+  .word  RTC_IRQHandler
+  .word  FLASH_IRQHandler
+  .word  RCC_IRQHandler
+  .word  EXTI0_IRQHandler
+  .word  EXTI1_IRQHandler
+  .word  EXTI2_IRQHandler
+  .word  EXTI3_IRQHandler
+  .word  EXTI4_IRQHandler
+  .word  DMA1_Channel1_IRQHandler
+  .word  DMA1_Channel2_IRQHandler
+  .word  DMA1_Channel3_IRQHandler
+  .word  DMA1_Channel4_IRQHandler
+  .word  DMA1_Channel5_IRQHandler
+  .word  DMA1_Channel6_IRQHandler
+  .word  DMA1_Channel7_IRQHandler
+  .word  ADC1_2_IRQHandler
+  .word  USB_HP_CAN1_TX_IRQHandler
+  .word  USB_LP_CAN1_RX0_IRQHandler
+  .word  CAN1_RX1_IRQHandler
+  .word  CAN1_SCE_IRQHandler
+  .word  EXTI9_5_IRQHandler
+  .word  TIM1_BRK_TIM9_IRQHandler
+  .word  TIM1_UP_TIM10_IRQHandler
+  .word  TIM1_TRG_COM_TIM11_IRQHandler
+  .word  TIM1_CC_IRQHandler
+  .word  TIM2_IRQHandler
+  .word  TIM3_IRQHandler
+  .word  TIM4_IRQHandler
+  .word  I2C1_EV_IRQHandler
+  .word  I2C1_ER_IRQHandler
+  .word  I2C2_EV_IRQHandler
+  .word  I2C2_ER_IRQHandler
+  .word  SPI1_IRQHandler
+  .word  SPI2_IRQHandler
+  .word  USART1_IRQHandler
+  .word  USART2_IRQHandler
+  .word  USART3_IRQHandler
+  .word  EXTI15_10_IRQHandler
+  .word  RTC_Alarm_IRQHandler
+  .word  USBWakeUp_IRQHandler
+  .word  TIM8_BRK_TIM12_IRQHandler
+  .word  TIM8_UP_TIM13_IRQHandler
+  .word  TIM8_TRG_COM_TIM14_IRQHandler
+  .word  TIM8_CC_IRQHandler
+  .word  ADC3_IRQHandler
+  .word  FSMC_IRQHandler
+  .word  SDIO_IRQHandler
+  .word  TIM5_IRQHandler
+  .word  SPI3_IRQHandler
+  .word  UART4_IRQHandler
+  .word  UART5_IRQHandler
+  .word  TIM6_IRQHandler
+  .word  TIM7_IRQHandler
+  .word  DMA2_Channel1_IRQHandler
+  .word  DMA2_Channel2_IRQHandler
+  .word  DMA2_Channel3_IRQHandler
+  .word  DMA2_Channel4_5_IRQHandler
+  .word  0
+  .word  0
+  .word  0
+  .word  0
+  .word  0
+  .word  0
+  .word  0
+  .word  0
+  .word  0
+  .word  0
+  .word  0
+  .word  0
+  .word  0
+  .word  0
+  .word  0
+  .word  0
+  .word  0
+  .word  0
+  .word  0
+  .word  0
+  .word  0
+  .word  0
+  .word  0
+  .word  0
+  .word  0
+  .word  0
+  .word  0
+  .word  0
+  .word  0
+  .word  0
+  .word  0
+  .word  0
+  .word  0
+  .word  0
+  .word  0
+  .word  0
+  .word  0
+  .word  0
+  .word  0
+  .word  0
+  .word  0
+  .word  0
+  .word  0
+  .word  0
+  .word  BootRAM       /* @0x1E0. This is for boot in RAM mode for 
+                         STM32F10x XL-Density devices. */
+/*******************************************************************************
+*
+* Provide weak aliases for each Exception handler to the Default_Handler. 
+* As they are weak aliases, any function with the same name will override 
+* this definition.
+* 
+*******************************************************************************/
+    
+  .weak  NMI_Handler
+  .thumb_set NMI_Handler,Default_Handler
+  
+  .weak  HardFault_Handler
+  .thumb_set HardFault_Handler,Default_Handler
+  
+  .weak  MemManage_Handler
+  .thumb_set MemManage_Handler,Default_Handler
+  
+  .weak  BusFault_Handler
+  .thumb_set BusFault_Handler,Default_Handler
+
+  .weak  UsageFault_Handler
+  .thumb_set UsageFault_Handler,Default_Handler
+
+  .weak  SVC_Handler
+  .thumb_set SVC_Handler,Default_Handler
+
+  .weak  DebugMon_Handler
+  .thumb_set DebugMon_Handler,Default_Handler
+
+  .weak  PendSV_Handler
+  .thumb_set PendSV_Handler,Default_Handler
+
+  .weak  SysTick_Handler
+  .thumb_set SysTick_Handler,Default_Handler
+
+  .weak  WWDG_IRQHandler
+  .thumb_set WWDG_IRQHandler,Default_Handler
+
+  .weak  PVD_IRQHandler
+  .thumb_set PVD_IRQHandler,Default_Handler
+
+  .weak  TAMPER_IRQHandler
+  .thumb_set TAMPER_IRQHandler,Default_Handler
+
+  .weak  RTC_IRQHandler
+  .thumb_set RTC_IRQHandler,Default_Handler
+
+  .weak  FLASH_IRQHandler
+  .thumb_set FLASH_IRQHandler,Default_Handler
+
+  .weak  RCC_IRQHandler
+  .thumb_set RCC_IRQHandler,Default_Handler
+
+  .weak  EXTI0_IRQHandler
+  .thumb_set EXTI0_IRQHandler,Default_Handler
+
+  .weak  EXTI1_IRQHandler
+  .thumb_set EXTI1_IRQHandler,Default_Handler
+
+  .weak  EXTI2_IRQHandler
+  .thumb_set EXTI2_IRQHandler,Default_Handler
+
+  .weak  EXTI3_IRQHandler
+  .thumb_set EXTI3_IRQHandler,Default_Handler
+
+  .weak  EXTI4_IRQHandler
+  .thumb_set EXTI4_IRQHandler,Default_Handler
+
+  .weak  DMA1_Channel1_IRQHandler
+  .thumb_set DMA1_Channel1_IRQHandler,Default_Handler
+
+  .weak  DMA1_Channel2_IRQHandler
+  .thumb_set DMA1_Channel2_IRQHandler,Default_Handler
+
+  .weak  DMA1_Channel3_IRQHandler
+  .thumb_set DMA1_Channel3_IRQHandler,Default_Handler
+
+  .weak  DMA1_Channel4_IRQHandler
+  .thumb_set DMA1_Channel4_IRQHandler,Default_Handler
+
+  .weak  DMA1_Channel5_IRQHandler
+  .thumb_set DMA1_Channel5_IRQHandler,Default_Handler
+
+  .weak  DMA1_Channel6_IRQHandler
+  .thumb_set DMA1_Channel6_IRQHandler,Default_Handler
+
+  .weak  DMA1_Channel7_IRQHandler
+  .thumb_set DMA1_Channel7_IRQHandler,Default_Handler
+
+  .weak  ADC1_2_IRQHandler
+  .thumb_set ADC1_2_IRQHandler,Default_Handler
+
+  .weak  USB_HP_CAN1_TX_IRQHandler
+  .thumb_set USB_HP_CAN1_TX_IRQHandler,Default_Handler
+
+  .weak  USB_LP_CAN1_RX0_IRQHandler
+  .thumb_set USB_LP_CAN1_RX0_IRQHandler,Default_Handler
+
+  .weak  CAN1_RX1_IRQHandler
+  .thumb_set CAN1_RX1_IRQHandler,Default_Handler
+
+  .weak  CAN1_SCE_IRQHandler
+  .thumb_set CAN1_SCE_IRQHandler,Default_Handler
+
+  .weak  EXTI9_5_IRQHandler
+  .thumb_set EXTI9_5_IRQHandler,Default_Handler
+
+  .weak  TIM1_BRK_TIM9_IRQHandler
+  .thumb_set TIM1_BRK_TIM9_IRQHandler,Default_Handler
+
+  .weak  TIM1_UP_TIM10_IRQHandler
+  .thumb_set TIM1_UP_TIM10_IRQHandler,Default_Handler
+
+  .weak  TIM1_TRG_COM_TIM11_IRQHandler
+  .thumb_set TIM1_TRG_COM_TIM11_IRQHandler,Default_Handler
+
+  .weak  TIM1_CC_IRQHandler
+  .thumb_set TIM1_CC_IRQHandler,Default_Handler
+
+  .weak  TIM2_IRQHandler
+  .thumb_set TIM2_IRQHandler,Default_Handler
+
+  .weak  TIM3_IRQHandler
+  .thumb_set TIM3_IRQHandler,Default_Handler
+
+  .weak  TIM4_IRQHandler
+  .thumb_set TIM4_IRQHandler,Default_Handler
+
+  .weak  I2C1_EV_IRQHandler
+  .thumb_set I2C1_EV_IRQHandler,Default_Handler
+
+  .weak  I2C1_ER_IRQHandler
+  .thumb_set I2C1_ER_IRQHandler,Default_Handler
+
+  .weak  I2C2_EV_IRQHandler
+  .thumb_set I2C2_EV_IRQHandler,Default_Handler
+
+  .weak  I2C2_ER_IRQHandler
+  .thumb_set I2C2_ER_IRQHandler,Default_Handler
+
+  .weak  SPI1_IRQHandler
+  .thumb_set SPI1_IRQHandler,Default_Handler
+
+  .weak  SPI2_IRQHandler
+  .thumb_set SPI2_IRQHandler,Default_Handler
+
+  .weak  USART1_IRQHandler
+  .thumb_set USART1_IRQHandler,Default_Handler
+
+  .weak  USART2_IRQHandler
+  .thumb_set USART2_IRQHandler,Default_Handler
+
+  .weak  USART3_IRQHandler
+  .thumb_set USART3_IRQHandler,Default_Handler
+
+  .weak  EXTI15_10_IRQHandler
+  .thumb_set EXTI15_10_IRQHandler,Default_Handler
+
+  .weak  RTC_Alarm_IRQHandler
+  .thumb_set RTC_Alarm_IRQHandler,Default_Handler
+
+  .weak  USBWakeUp_IRQHandler
+  .thumb_set USBWakeUp_IRQHandler,Default_Handler
+
+  .weak  TIM8_BRK_TIM12_IRQHandler
+  .thumb_set TIM8_BRK_TIM12_IRQHandler,Default_Handler
+
+  .weak  TIM8_UP_TIM13_IRQHandler
+  .thumb_set TIM8_UP_TIM13_IRQHandler,Default_Handler
+
+  .weak  TIM8_TRG_COM_TIM14_IRQHandler
+  .thumb_set TIM8_TRG_COM_TIM14_IRQHandler,Default_Handler
+
+  .weak  TIM8_CC_IRQHandler
+  .thumb_set TIM8_CC_IRQHandler,Default_Handler
+
+  .weak  ADC3_IRQHandler
+  .thumb_set ADC3_IRQHandler,Default_Handler
+
+  .weak  FSMC_IRQHandler
+  .thumb_set FSMC_IRQHandler,Default_Handler
+
+  .weak  SDIO_IRQHandler
+  .thumb_set SDIO_IRQHandler,Default_Handler
+
+  .weak  TIM5_IRQHandler
+  .thumb_set TIM5_IRQHandler,Default_Handler
+
+  .weak  SPI3_IRQHandler
+  .thumb_set SPI3_IRQHandler,Default_Handler
+
+  .weak  UART4_IRQHandler
+  .thumb_set UART4_IRQHandler,Default_Handler
+
+  .weak  UART5_IRQHandler
+  .thumb_set UART5_IRQHandler,Default_Handler
+
+  .weak  TIM6_IRQHandler
+  .thumb_set TIM6_IRQHandler,Default_Handler
+
+  .weak  TIM7_IRQHandler
+  .thumb_set TIM7_IRQHandler,Default_Handler
+
+  .weak  DMA2_Channel1_IRQHandler
+  .thumb_set DMA2_Channel1_IRQHandler,Default_Handler
+
+  .weak  DMA2_Channel2_IRQHandler
+  .thumb_set DMA2_Channel2_IRQHandler,Default_Handler
+
+  .weak  DMA2_Channel3_IRQHandler
+  .thumb_set DMA2_Channel3_IRQHandler,Default_Handler
+
+  .weak  DMA2_Channel4_5_IRQHandler
+  .thumb_set DMA2_Channel4_5_IRQHandler,Default_Handler
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

bsp/stm32f10x_HAL/Libraries/CMSIS/Device/ST/STM32F1xx/Source/Templates/gcc/startup_stm32f105xc.s

@@ -0,0 +1,476 @@
+/**
+  *************** (C) COPYRIGHT 2017 STMicroelectronics ************************
+  * @file      startup_stm32f105xc.s
+  * @author    MCD Application Team
+  * @version   V4.2.0
+  * @date      31-March-2017
+  * @brief     STM32F105xC Devices vector table for Atollic toolchain.
+  *            This module performs:
+  *                - Set the initial SP
+  *                - Set the initial PC == Reset_Handler,
+  *                - Set the vector table entries with the exceptions ISR address
+  *                - Configure the clock system   
+  *                - Branches to main in the C library (which eventually
+  *                  calls main()).
+  *            After Reset the Cortex-M3 processor is in Thread mode,
+  *            priority is Privileged, and the Stack is set to Main.
+  ******************************************************************************
+  *
+  * <h2><center>&copy; COPYRIGHT(c) 2017 STMicroelectronics</center></h2>
+  *
+  * Redistribution and use in source and binary forms, with or without modification,
+  * are permitted provided that the following conditions are met:
+  *   1. Redistributions of source code must retain the above copyright notice,
+  *      this list of conditions and the following disclaimer.
+  *   2. Redistributions in binary form must reproduce the above copyright notice,
+  *      this list of conditions and the following disclaimer in the documentation
+  *      and/or other materials provided with the distribution.
+  *   3. Neither the name of STMicroelectronics nor the names of its contributors
+  *      may be used to endorse or promote products derived from this software
+  *      without specific prior written permission.
+  *
+  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+  * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+  * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+  * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+  * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+  * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+  * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+  *
+  ******************************************************************************
+  */
+
+  .syntax unified
+  .cpu cortex-m3
+  .fpu softvfp
+  .thumb
+
+.global g_pfnVectors
+.global Default_Handler
+
+/* start address for the initialization values of the .data section.
+defined in linker script */
+.word _sidata
+/* start address for the .data section. defined in linker script */
+.word _sdata
+/* end address for the .data section. defined in linker script */
+.word _edata
+/* start address for the .bss section. defined in linker script */
+.word _sbss
+/* end address for the .bss section. defined in linker script */
+.word _ebss
+
+.equ  BootRAM, 0xF1E0F85F
+/**
+ * @brief  This is the code that gets called when the processor first
+ *          starts execution following a reset event. Only the absolutely
+ *          necessary set is performed, after which the application
+ *          supplied main() routine is called.
+ * @param  None
+ * @retval : None
+*/
+
+  .section .text.Reset_Handler
+  .weak Reset_Handler
+  .type Reset_Handler, %function
+Reset_Handler:
+
+/* Copy the data segment initializers from flash to SRAM */
+  movs r1, #0
+  b LoopCopyDataInit
+
+CopyDataInit:
+  ldr r3, =_sidata
+  ldr r3, [r3, r1]
+  str r3, [r0, r1]
+  adds r1, r1, #4
+
+LoopCopyDataInit:
+  ldr r0, =_sdata
+  ldr r3, =_edata
+  adds r2, r0, r1
+  cmp r2, r3
+  bcc CopyDataInit
+  ldr r2, =_sbss
+  b LoopFillZerobss
+
+/* Zero fill the bss segment. */
+FillZerobss:
+  movs r3, #0
+  str r3, [r2], #4
+
+LoopFillZerobss:
+  ldr r3, = _ebss
+  cmp r2, r3
+  bcc FillZerobss
+/* Call the clock system intitialization function.*/
+    bl  SystemInit
+/* Call the application's entry point.*/
+  bl main
+  bx lr
+.size Reset_Handler, .-Reset_Handler
+
+/**
+ * @brief  This is the code that gets called when the processor receives an
+ *         unexpected interrupt.  This simply enters an infinite loop, preserving
+ *         the system state for examination by a debugger.
+ * @param  None
+ * @retval None
+*/
+    .section .text.Default_Handler,"ax",%progbits
+Default_Handler:
+Infinite_Loop:
+  b Infinite_Loop
+  .size Default_Handler, .-Default_Handler
+/******************************************************************************
+*
+* The minimal vector table for a Cortex M3.  Note that the proper constructs
+* must be placed on this to ensure that it ends up at physical address
+* 0x0000.0000.
+*
+******************************************************************************/
+  .section .isr_vector,"a",%progbits
+  .type g_pfnVectors, %object
+  .size g_pfnVectors, .-g_pfnVectors
+
+
+g_pfnVectors:
+
+  .word _estack
+  .word Reset_Handler
+  .word NMI_Handler
+  .word HardFault_Handler
+  .word MemManage_Handler
+  .word BusFault_Handler
+  .word UsageFault_Handler
+  .word 0
+  .word 0
+  .word 0
+  .word 0
+  .word SVC_Handler
+  .word DebugMon_Handler
+  .word 0
+  .word PendSV_Handler
+  .word SysTick_Handler
+  .word WWDG_IRQHandler
+  .word PVD_IRQHandler
+  .word TAMPER_IRQHandler
+  .word RTC_IRQHandler
+  .word FLASH_IRQHandler
+  .word RCC_IRQHandler
+  .word EXTI0_IRQHandler
+  .word EXTI1_IRQHandler
+  .word EXTI2_IRQHandler
+  .word EXTI3_IRQHandler
+  .word EXTI4_IRQHandler
+  .word DMA1_Channel1_IRQHandler
+  .word DMA1_Channel2_IRQHandler
+  .word DMA1_Channel3_IRQHandler
+  .word DMA1_Channel4_IRQHandler
+  .word DMA1_Channel5_IRQHandler
+  .word DMA1_Channel6_IRQHandler
+  .word DMA1_Channel7_IRQHandler
+  .word ADC1_2_IRQHandler
+  .word CAN1_TX_IRQHandler
+  .word CAN1_RX0_IRQHandler
+   .word CAN1_RX1_IRQHandler
+  .word CAN1_SCE_IRQHandler
+  .word EXTI9_5_IRQHandler
+  .word TIM1_BRK_IRQHandler
+  .word TIM1_UP_IRQHandler
+  .word TIM1_TRG_COM_IRQHandler
+  .word TIM1_CC_IRQHandler
+  .word TIM2_IRQHandler
+  .word TIM3_IRQHandler
+  .word TIM4_IRQHandler
+  .word I2C1_EV_IRQHandler
+  .word I2C1_ER_IRQHandler
+  .word I2C2_EV_IRQHandler
+  .word I2C2_ER_IRQHandler
+  .word SPI1_IRQHandler
+  .word SPI2_IRQHandler
+  .word USART1_IRQHandler
+  .word USART2_IRQHandler
+  .word USART3_IRQHandler
+  .word EXTI15_10_IRQHandler
+  .word RTC_Alarm_IRQHandler
+  .word OTG_FS_WKUP_IRQHandler
+  .word 0
+  .word 0
+  .word 0
+  .word 0
+  .word 0
+  .word 0
+  .word 0
+  .word TIM5_IRQHandler
+  .word SPI3_IRQHandler
+  .word UART4_IRQHandler
+  .word UART5_IRQHandler
+  .word TIM6_IRQHandler
+  .word TIM7_IRQHandler
+  .word DMA2_Channel1_IRQHandler
+  .word DMA2_Channel2_IRQHandler
+  .word DMA2_Channel3_IRQHandler
+  .word DMA2_Channel4_IRQHandler
+  .word DMA2_Channel5_IRQHandler
+  .word 0
+  .word 0
+  .word CAN2_TX_IRQHandler
+  .word CAN2_RX0_IRQHandler
+  .word CAN2_RX1_IRQHandler
+  .word CAN2_SCE_IRQHandler
+  .word OTG_FS_IRQHandler
+  .word 0
+  .word 0
+  .word 0
+  .word 0
+  .word 0
+  .word 0
+  .word 0
+  .word 0
+  .word 0
+  .word 0
+  .word 0
+  .word 0
+  .word 0
+  .word 0
+  .word 0
+  .word 0
+  .word 0
+  .word 0
+  .word 0
+  .word 0
+  .word 0
+  .word 0
+  .word 0
+  .word 0
+  .word 0
+  .word 0
+  .word 0
+  .word 0
+  .word 0
+  .word 0
+  .word 0
+  .word 0
+  .word 0
+  .word 0
+  .word 0
+  .word 0
+  .word BootRAM     /* @0x1E0. This is for boot in RAM mode for
+                         STM32F10x Connectivity line Devices. */
+
+/*******************************************************************************
+*
+* Provide weak aliases for each Exception handler to the Default_Handler.
+* As they are weak aliases, any function with the same name will override
+* this definition.
+*
+*******************************************************************************/
+  .weak NMI_Handler
+  .thumb_set NMI_Handler,Default_Handler
+
+  .weak HardFault_Handler
+  .thumb_set HardFault_Handler,Default_Handler
+
+  .weak MemManage_Handler
+  .thumb_set MemManage_Handler,Default_Handler
+
+  .weak BusFault_Handler
+  .thumb_set BusFault_Handler,Default_Handler
+
+  .weak UsageFault_Handler
+  .thumb_set UsageFault_Handler,Default_Handler
+
+  .weak SVC_Handler
+  .thumb_set SVC_Handler,Default_Handler
+
+  .weak DebugMon_Handler
+  .thumb_set DebugMon_Handler,Default_Handler
+
+  .weak PendSV_Handler
+  .thumb_set PendSV_Handler,Default_Handler
+
+  .weak SysTick_Handler
+  .thumb_set SysTick_Handler,Default_Handler
+
+  .weak WWDG_IRQHandler
+  .thumb_set WWDG_IRQHandler,Default_Handler
+
+  .weak PVD_IRQHandler
+  .thumb_set PVD_IRQHandler,Default_Handler
+
+  .weak TAMPER_IRQHandler
+  .thumb_set TAMPER_IRQHandler,Default_Handler
+
+  .weak RTC_IRQHandler
+  .thumb_set RTC_IRQHandler,Default_Handler
+
+  .weak FLASH_IRQHandler
+  .thumb_set FLASH_IRQHandler,Default_Handler
+
+  .weak RCC_IRQHandler
+  .thumb_set RCC_IRQHandler,Default_Handler
+
+  .weak EXTI0_IRQHandler
+  .thumb_set EXTI0_IRQHandler,Default_Handler
+
+  .weak EXTI1_IRQHandler
+  .thumb_set EXTI1_IRQHandler,Default_Handler
+
+  .weak EXTI2_IRQHandler
+  .thumb_set EXTI2_IRQHandler,Default_Handler
+
+  .weak EXTI3_IRQHandler
+  .thumb_set EXTI3_IRQHandler,Default_Handler
+
+  .weak EXTI4_IRQHandler
+  .thumb_set EXTI4_IRQHandler,Default_Handler
+
+  .weak DMA1_Channel1_IRQHandler
+  .thumb_set DMA1_Channel1_IRQHandler,Default_Handler
+
+  .weak DMA1_Channel2_IRQHandler
+  .thumb_set DMA1_Channel2_IRQHandler,Default_Handler
+
+  .weak DMA1_Channel3_IRQHandler
+  .thumb_set DMA1_Channel3_IRQHandler,Default_Handler
+
+  .weak DMA1_Channel4_IRQHandler
+  .thumb_set DMA1_Channel4_IRQHandler,Default_Handler
+
+  .weak DMA1_Channel5_IRQHandler
+  .thumb_set DMA1_Channel5_IRQHandler,Default_Handler
+
+  .weak DMA1_Channel6_IRQHandler
+  .thumb_set DMA1_Channel6_IRQHandler,Default_Handler
+
+  .weak DMA1_Channel7_IRQHandler
+  .thumb_set DMA1_Channel7_IRQHandler,Default_Handler
+
+  .weak ADC1_2_IRQHandler
+  .thumb_set ADC1_2_IRQHandler,Default_Handler
+
+  .weak CAN1_TX_IRQHandler
+  .thumb_set CAN1_TX_IRQHandler,Default_Handler
+
+  .weak CAN1_RX0_IRQHandler
+  .thumb_set CAN1_RX0_IRQHandler,Default_Handler
+
+  .weak CAN1_RX1_IRQHandler
+  .thumb_set CAN1_RX1_IRQHandler,Default_Handler
+
+  .weak CAN1_SCE_IRQHandler
+  .thumb_set CAN1_SCE_IRQHandler,Default_Handler
+
+  .weak EXTI9_5_IRQHandler
+  .thumb_set EXTI9_5_IRQHandler,Default_Handler
+
+  .weak TIM1_BRK_IRQHandler
+  .thumb_set TIM1_BRK_IRQHandler,Default_Handler
+
+  .weak TIM1_UP_IRQHandler
+  .thumb_set TIM1_UP_IRQHandler,Default_Handler
+
+  .weak TIM1_TRG_COM_IRQHandler
+  .thumb_set TIM1_TRG_COM_IRQHandler,Default_Handler
+
+  .weak TIM1_CC_IRQHandler
+  .thumb_set TIM1_CC_IRQHandler,Default_Handler
+
+  .weak TIM2_IRQHandler
+  .thumb_set TIM2_IRQHandler,Default_Handler
+
+  .weak TIM3_IRQHandler
+  .thumb_set TIM3_IRQHandler,Default_Handler
+
+  .weak TIM4_IRQHandler
+  .thumb_set TIM4_IRQHandler,Default_Handler
+
+  .weak I2C1_EV_IRQHandler
+  .thumb_set I2C1_EV_IRQHandler,Default_Handler
+
+  .weak I2C1_ER_IRQHandler
+  .thumb_set I2C1_ER_IRQHandler,Default_Handler
+
+  .weak I2C2_EV_IRQHandler
+  .thumb_set I2C2_EV_IRQHandler,Default_Handler
+
+  .weak I2C2_ER_IRQHandler
+  .thumb_set I2C2_ER_IRQHandler,Default_Handler
+
+  .weak SPI1_IRQHandler
+  .thumb_set SPI1_IRQHandler,Default_Handler
+
+  .weak SPI2_IRQHandler
+  .thumb_set SPI2_IRQHandler,Default_Handler
+
+  .weak USART1_IRQHandler
+  .thumb_set USART1_IRQHandler,Default_Handler
+
+  .weak USART2_IRQHandler
+  .thumb_set USART2_IRQHandler,Default_Handler
+
+  .weak USART3_IRQHandler
+  .thumb_set USART3_IRQHandler,Default_Handler
+
+  .weak EXTI15_10_IRQHandler
+  .thumb_set EXTI15_10_IRQHandler,Default_Handler
+
+  .weak RTC_Alarm_IRQHandler
+  .thumb_set RTC_Alarm_IRQHandler,Default_Handler
+
+  .weak OTG_FS_WKUP_IRQHandler
+  .thumb_set OTG_FS_WKUP_IRQHandler,Default_Handler
+
+  .weak TIM5_IRQHandler
+  .thumb_set TIM5_IRQHandler,Default_Handler
+
+  .weak SPI3_IRQHandler
+  .thumb_set SPI3_IRQHandler,Default_Handler
+
+  .weak UART4_IRQHandler
+  .thumb_set UART4_IRQHandler,Default_Handler
+
+  .weak UART5_IRQHandler
+  .thumb_set UART5_IRQHandler,Default_Handler
+
+  .weak TIM6_IRQHandler
+  .thumb_set TIM6_IRQHandler,Default_Handler
+
+  .weak TIM7_IRQHandler
+  .thumb_set TIM7_IRQHandler,Default_Handler
+
+  .weak DMA2_Channel1_IRQHandler
+  .thumb_set DMA2_Channel1_IRQHandler,Default_Handler
+
+  .weak DMA2_Channel2_IRQHandler
+  .thumb_set DMA2_Channel2_IRQHandler,Default_Handler
+
+  .weak DMA2_Channel3_IRQHandler
+  .thumb_set DMA2_Channel3_IRQHandler,Default_Handler
+
+  .weak DMA2_Channel4_IRQHandler
+  .thumb_set DMA2_Channel4_IRQHandler,Default_Handler
+
+  .weak DMA2_Channel5_IRQHandler
+  .thumb_set DMA2_Channel5_IRQHandler,Default_Handler
+
+  .weak CAN2_TX_IRQHandler
+  .thumb_set CAN2_TX_IRQHandler,Default_Handler
+
+  .weak CAN2_RX0_IRQHandler
+  .thumb_set CAN2_RX0_IRQHandler,Default_Handler
+
+  .weak CAN2_RX1_IRQHandler
+  .thumb_set CAN2_RX1_IRQHandler,Default_Handler
+
+  .weak CAN2_SCE_IRQHandler
+  .thumb_set CAN2_SCE_IRQHandler,Default_Handler
+
+  .weak OTG_FS_IRQHandler
+  .thumb_set OTG_FS_IRQHandler ,Default_Handler
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

bsp/stm32f10x_HAL/Libraries/CMSIS/Device/ST/STM32F1xx/Source/Templates/gcc/startup_stm32f107xc.s

@@ -0,0 +1,487 @@
+/**
+  *************** (C) COPYRIGHT 2017 STMicroelectronics ************************
+  * @file      startup_stm32f107xc.s
+  * @author    MCD Application Team
+  * @version   V4.2.0
+  * @date      31-March-2017
+  * @brief     STM32F107xC Devices vector table for Atollic toolchain.
+  *            This module performs:
+  *                - Set the initial SP
+  *                - Set the initial PC == Reset_Handler,
+  *                - Set the vector table entries with the exceptions ISR address
+  *                - Configure the clock system   
+  *                - Branches to main in the C library (which eventually
+  *                  calls main()).
+  *            After Reset the Cortex-M3 processor is in Thread mode,
+  *            priority is Privileged, and the Stack is set to Main.
+  ******************************************************************************
+  *
+  * <h2><center>&copy; COPYRIGHT(c) 2017 STMicroelectronics</center></h2>
+  *
+  * Redistribution and use in source and binary forms, with or without modification,
+  * are permitted provided that the following conditions are met:
+  *   1. Redistributions of source code must retain the above copyright notice,
+  *      this list of conditions and the following disclaimer.
+  *   2. Redistributions in binary form must reproduce the above copyright notice,
+  *      this list of conditions and the following disclaimer in the documentation
+  *      and/or other materials provided with the distribution.
+  *   3. Neither the name of STMicroelectronics nor the names of its contributors
+  *      may be used to endorse or promote products derived from this software
+  *      without specific prior written permission.
+  *
+  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+  * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+  * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+  * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+  * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+  * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+  * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+  *
+  ******************************************************************************
+  */
+
+  .syntax unified
+  .cpu cortex-m3
+  .fpu softvfp
+  .thumb
+
+.global g_pfnVectors
+.global Default_Handler
+
+/* start address for the initialization values of the .data section.
+defined in linker script */
+.word _sidata
+/* start address for the .data section. defined in linker script */
+.word _sdata
+/* end address for the .data section. defined in linker script */
+.word _edata
+/* start address for the .bss section. defined in linker script */
+.word _sbss
+/* end address for the .bss section. defined in linker script */
+.word _ebss
+
+.equ  BootRAM, 0xF1E0F85F
+/**
+ * @brief  This is the code that gets called when the processor first
+ *          starts execution following a reset event. Only the absolutely
+ *          necessary set is performed, after which the application
+ *          supplied main() routine is called.
+ * @param  None
+ * @retval : None
+*/
+
+  .section .text.Reset_Handler
+  .weak Reset_Handler
+  .type Reset_Handler, %function
+Reset_Handler:
+
+/* Copy the data segment initializers from flash to SRAM */
+  movs r1, #0
+  b LoopCopyDataInit
+
+CopyDataInit:
+  ldr r3, =_sidata
+  ldr r3, [r3, r1]
+  str r3, [r0, r1]
+  adds r1, r1, #4
+
+LoopCopyDataInit:
+  ldr r0, =_sdata
+  ldr r3, =_edata
+  adds r2, r0, r1
+  cmp r2, r3
+  bcc CopyDataInit
+  ldr r2, =_sbss
+  b LoopFillZerobss
+
+/* Zero fill the bss segment. */
+FillZerobss:
+  movs r3, #0
+  str r3, [r2], #4
+
+LoopFillZerobss:
+  ldr r3, = _ebss
+  cmp r2, r3
+  bcc FillZerobss
+
+/* Call the clock system intitialization function.*/
+    bl  SystemInit
+/* Call static constructors */
+    bl __libc_init_array
+/* Call the application's entry point.*/
+  bl main
+  bx lr
+.size Reset_Handler, .-Reset_Handler
+
+/**
+ * @brief  This is the code that gets called when the processor receives an
+ *         unexpected interrupt.  This simply enters an infinite loop, preserving
+ *         the system state for examination by a debugger.
+ *
+ * @param  None
+ * @retval : None
+*/
+    .section .text.Default_Handler,"ax",%progbits
+Default_Handler:
+Infinite_Loop:
+  b Infinite_Loop
+  .size Default_Handler, .-Default_Handler
+
+/******************************************************************************
+*
+* The minimal vector table for a Cortex M3.  Note that the proper constructs
+* must be placed on this to ensure that it ends up at physical address
+* 0x0000.0000.
+*
+******************************************************************************/
+  .section .isr_vector,"a",%progbits
+  .type g_pfnVectors, %object
+  .size g_pfnVectors, .-g_pfnVectors
+
+
+g_pfnVectors:
+
+  .word _estack
+  .word Reset_Handler
+  .word NMI_Handler
+  .word HardFault_Handler
+  .word MemManage_Handler
+  .word BusFault_Handler
+  .word UsageFault_Handler
+  .word 0
+  .word 0
+  .word 0
+  .word 0
+  .word SVC_Handler
+  .word DebugMon_Handler
+  .word 0
+  .word PendSV_Handler
+  .word SysTick_Handler
+  .word WWDG_IRQHandler
+  .word PVD_IRQHandler
+  .word TAMPER_IRQHandler
+  .word RTC_IRQHandler
+  .word FLASH_IRQHandler
+  .word RCC_IRQHandler
+  .word EXTI0_IRQHandler
+  .word EXTI1_IRQHandler
+  .word EXTI2_IRQHandler
+  .word EXTI3_IRQHandler
+  .word EXTI4_IRQHandler
+  .word DMA1_Channel1_IRQHandler
+  .word DMA1_Channel2_IRQHandler
+  .word DMA1_Channel3_IRQHandler
+  .word DMA1_Channel4_IRQHandler
+  .word DMA1_Channel5_IRQHandler
+  .word DMA1_Channel6_IRQHandler
+  .word DMA1_Channel7_IRQHandler
+  .word ADC1_2_IRQHandler
+  .word CAN1_TX_IRQHandler
+  .word CAN1_RX0_IRQHandler
+  .word CAN1_RX1_IRQHandler
+  .word CAN1_SCE_IRQHandler
+  .word EXTI9_5_IRQHandler
+  .word TIM1_BRK_IRQHandler
+  .word TIM1_UP_IRQHandler
+  .word TIM1_TRG_COM_IRQHandler
+  .word TIM1_CC_IRQHandler
+  .word TIM2_IRQHandler
+  .word TIM3_IRQHandler
+  .word TIM4_IRQHandler
+  .word I2C1_EV_IRQHandler
+  .word I2C1_ER_IRQHandler
+  .word I2C2_EV_IRQHandler
+  .word I2C2_ER_IRQHandler
+  .word SPI1_IRQHandler
+  .word SPI2_IRQHandler
+  .word USART1_IRQHandler
+  .word USART2_IRQHandler
+  .word USART3_IRQHandler
+  .word EXTI15_10_IRQHandler
+  .word RTC_Alarm_IRQHandler
+  .word OTG_FS_WKUP_IRQHandler
+  .word 0
+  .word 0
+  .word 0
+  .word 0
+  .word 0
+  .word 0
+  .word 0
+  .word TIM5_IRQHandler
+  .word SPI3_IRQHandler
+  .word UART4_IRQHandler
+  .word UART5_IRQHandler
+  .word TIM6_IRQHandler
+  .word TIM7_IRQHandler
+  .word DMA2_Channel1_IRQHandler
+  .word DMA2_Channel2_IRQHandler
+  .word DMA2_Channel3_IRQHandler
+  .word DMA2_Channel4_IRQHandler
+  .word DMA2_Channel5_IRQHandler
+  .word ETH_IRQHandler
+  .word ETH_WKUP_IRQHandler
+  .word CAN2_TX_IRQHandler
+  .word CAN2_RX0_IRQHandler
+  .word CAN2_RX1_IRQHandler
+  .word CAN2_SCE_IRQHandler
+  .word OTG_FS_IRQHandler
+  .word 0
+  .word 0
+  .word 0
+  .word 0
+  .word 0
+  .word 0
+  .word 0
+  .word 0
+  .word 0
+  .word 0
+  .word 0
+  .word 0
+  .word 0
+  .word 0
+  .word 0
+  .word 0
+  .word 0
+  .word 0
+  .word 0
+  .word 0
+  .word 0
+  .word 0
+  .word 0
+  .word 0
+  .word 0
+  .word 0
+  .word 0
+  .word 0
+  .word 0
+  .word 0
+  .word 0
+  .word 0
+  .word 0
+  .word 0
+  .word 0
+  .word 0
+  .word BootRAM     /* @0x1E0. This is for boot in RAM mode for
+                         STM32F10x Connectivity line Devices. */
+
+/*******************************************************************************
+*
+* Provide weak aliases for each Exception handler to the Default_Handler.
+* As they are weak aliases, any function with the same name will override
+* this definition.
+*
+*******************************************************************************/
+  .weak  NMI_Handler
+  .thumb_set NMI_Handler,Default_Handler
+
+  .weak  HardFault_Handler
+  .thumb_set HardFault_Handler,Default_Handler
+
+  .weak  MemManage_Handler
+  .thumb_set MemManage_Handler,Default_Handler
+
+  .weak  BusFault_Handler
+  .thumb_set BusFault_Handler,Default_Handler
+
+  .weak  UsageFault_Handler
+  .thumb_set UsageFault_Handler,Default_Handler
+
+  .weak  SVC_Handler
+  .thumb_set SVC_Handler,Default_Handler
+
+  .weak  DebugMon_Handler
+  .thumb_set DebugMon_Handler,Default_Handler
+
+  .weak  PendSV_Handler
+  .thumb_set PendSV_Handler,Default_Handler
+
+  .weak  SysTick_Handler
+  .thumb_set SysTick_Handler,Default_Handler
+
+  .weak  WWDG_IRQHandler
+  .thumb_set WWDG_IRQHandler,Default_Handler
+
+  .weak  PVD_IRQHandler
+  .thumb_set PVD_IRQHandler,Default_Handler
+
+  .weak  TAMPER_IRQHandler
+  .thumb_set TAMPER_IRQHandler,Default_Handler
+
+  .weak  RTC_IRQHandler
+  .thumb_set RTC_IRQHandler,Default_Handler
+
+  .weak  FLASH_IRQHandler
+  .thumb_set FLASH_IRQHandler,Default_Handler
+
+  .weak  RCC_IRQHandler
+  .thumb_set RCC_IRQHandler,Default_Handler
+
+  .weak  EXTI0_IRQHandler
+  .thumb_set EXTI0_IRQHandler,Default_Handler
+
+  .weak  EXTI1_IRQHandler
+  .thumb_set EXTI1_IRQHandler,Default_Handler
+
+  .weak  EXTI2_IRQHandler
+  .thumb_set EXTI2_IRQHandler,Default_Handler
+
+  .weak  EXTI3_IRQHandler
+  .thumb_set EXTI3_IRQHandler,Default_Handler
+
+  .weak  EXTI4_IRQHandler
+  .thumb_set EXTI4_IRQHandler,Default_Handler
+
+  .weak  DMA1_Channel1_IRQHandler
+  .thumb_set DMA1_Channel1_IRQHandler,Default_Handler
+
+  .weak  DMA1_Channel2_IRQHandler
+  .thumb_set DMA1_Channel2_IRQHandler,Default_Handler
+
+  .weak  DMA1_Channel3_IRQHandler
+  .thumb_set DMA1_Channel3_IRQHandler,Default_Handler
+
+  .weak  DMA1_Channel4_IRQHandler
+  .thumb_set DMA1_Channel4_IRQHandler,Default_Handler
+
+  .weak  DMA1_Channel5_IRQHandler
+  .thumb_set DMA1_Channel5_IRQHandler,Default_Handler
+
+  .weak  DMA1_Channel6_IRQHandler
+  .thumb_set DMA1_Channel6_IRQHandler,Default_Handler
+
+  .weak  DMA1_Channel7_IRQHandler
+  .thumb_set DMA1_Channel7_IRQHandler,Default_Handler
+
+  .weak  ADC1_2_IRQHandler
+  .thumb_set ADC1_2_IRQHandler,Default_Handler
+
+  .weak  CAN1_TX_IRQHandler
+  .thumb_set CAN1_TX_IRQHandler,Default_Handler
+
+  .weak  CAN1_RX0_IRQHandler
+  .thumb_set CAN1_RX0_IRQHandler,Default_Handler
+
+  .weak  CAN1_RX1_IRQHandler
+  .thumb_set CAN1_RX1_IRQHandler,Default_Handler
+
+  .weak  CAN1_SCE_IRQHandler
+  .thumb_set CAN1_SCE_IRQHandler,Default_Handler
+
+  .weak  EXTI9_5_IRQHandler
+  .thumb_set EXTI9_5_IRQHandler,Default_Handler
+
+  .weak  TIM1_BRK_IRQHandler
+  .thumb_set TIM1_BRK_IRQHandler,Default_Handler
+
+  .weak  TIM1_UP_IRQHandler
+  .thumb_set TIM1_UP_IRQHandler,Default_Handler
+
+  .weak  TIM1_TRG_COM_IRQHandler
+  .thumb_set TIM1_TRG_COM_IRQHandler,Default_Handler
+
+  .weak  TIM1_CC_IRQHandler
+  .thumb_set TIM1_CC_IRQHandler,Default_Handler
+
+  .weak  TIM2_IRQHandler
+  .thumb_set TIM2_IRQHandler,Default_Handler
+
+  .weak  TIM3_IRQHandler
+  .thumb_set TIM3_IRQHandler,Default_Handler
+
+  .weak  TIM4_IRQHandler
+  .thumb_set TIM4_IRQHandler,Default_Handler
+
+  .weak  I2C1_EV_IRQHandler
+  .thumb_set I2C1_EV_IRQHandler,Default_Handler
+
+  .weak  I2C1_ER_IRQHandler
+  .thumb_set I2C1_ER_IRQHandler,Default_Handler
+
+  .weak  I2C2_EV_IRQHandler
+  .thumb_set I2C2_EV_IRQHandler,Default_Handler
+
+  .weak  I2C2_ER_IRQHandler
+  .thumb_set I2C2_ER_IRQHandler,Default_Handler
+
+  .weak  SPI1_IRQHandler
+  .thumb_set SPI1_IRQHandler,Default_Handler
+
+  .weak  SPI2_IRQHandler
+  .thumb_set SPI2_IRQHandler,Default_Handler
+
+  .weak  USART1_IRQHandler
+  .thumb_set USART1_IRQHandler,Default_Handler
+
+  .weak  USART2_IRQHandler
+  .thumb_set USART2_IRQHandler,Default_Handler
+
+  .weak  USART3_IRQHandler
+  .thumb_set USART3_IRQHandler,Default_Handler
+
+  .weak  EXTI15_10_IRQHandler
+  .thumb_set EXTI15_10_IRQHandler,Default_Handler
+
+  .weak  RTC_Alarm_IRQHandler
+  .thumb_set RTC_Alarm_IRQHandler,Default_Handler
+
+  .weak  OTG_FS_WKUP_IRQHandler
+  .thumb_set OTG_FS_WKUP_IRQHandler,Default_Handler
+
+  .weak  TIM5_IRQHandler
+  .thumb_set TIM5_IRQHandler,Default_Handler
+
+  .weak  SPI3_IRQHandler
+  .thumb_set SPI3_IRQHandler,Default_Handler
+
+  .weak  UART4_IRQHandler
+  .thumb_set UART4_IRQHandler,Default_Handler
+
+  .weak  UART5_IRQHandler
+  .thumb_set UART5_IRQHandler,Default_Handler
+
+  .weak  TIM6_IRQHandler
+  .thumb_set TIM6_IRQHandler,Default_Handler
+
+  .weak  TIM7_IRQHandler
+  .thumb_set TIM7_IRQHandler,Default_Handler
+
+  .weak  DMA2_Channel1_IRQHandler
+  .thumb_set DMA2_Channel1_IRQHandler,Default_Handler
+
+  .weak  DMA2_Channel2_IRQHandler
+  .thumb_set DMA2_Channel2_IRQHandler,Default_Handler
+
+  .weak  DMA2_Channel3_IRQHandler
+  .thumb_set DMA2_Channel3_IRQHandler,Default_Handler
+
+  .weak  DMA2_Channel4_IRQHandler
+  .thumb_set DMA2_Channel4_IRQHandler,Default_Handler
+
+  .weak  DMA2_Channel5_IRQHandler
+  .thumb_set DMA2_Channel5_IRQHandler,Default_Handler
+
+  .weak  ETH_IRQHandler
+  .thumb_set ETH_IRQHandler,Default_Handler
+
+  .weak  ETH_WKUP_IRQHandler
+  .thumb_set ETH_WKUP_IRQHandler,Default_Handler
+
+  .weak  CAN2_TX_IRQHandler
+  .thumb_set CAN2_TX_IRQHandler,Default_Handler
+
+  .weak  CAN2_RX0_IRQHandler
+  .thumb_set CAN2_RX0_IRQHandler,Default_Handler
+
+  .weak  CAN2_RX1_IRQHandler
+  .thumb_set CAN2_RX1_IRQHandler,Default_Handler
+
+  .weak  CAN2_SCE_IRQHandler
+  .thumb_set CAN2_SCE_IRQHandler,Default_Handler
+
+  .weak  OTG_FS_IRQHandler
+  .thumb_set OTG_FS_IRQHandler ,Default_Handler
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

bsp/stm32f10x_HAL/Libraries/CMSIS/Device/ST/STM32F1xx/Source/Templates/iar/linker/stm32f100xb_flash.icf

@@ -0,0 +1,31 @@
+/*###ICF### Section handled by ICF editor, don't touch! ****/
+/*-Editor annotation file-*/
+/* IcfEditorFile="$TOOLKIT_DIR$\config\ide\IcfEditor\cortex_v1_0.xml" */
+/*-Specials-*/
+define symbol __ICFEDIT_intvec_start__ = 0x08000000;
+/*-Memory Regions-*/
+define symbol __ICFEDIT_region_ROM_start__   = 0x08000000 ;
+define symbol __ICFEDIT_region_ROM_end__     = 0x0801FFFF;
+define symbol __ICFEDIT_region_RAM_start__   = 0x20000000;
+define symbol __ICFEDIT_region_RAM_end__     = 0x20001FFF;
+/*-Sizes-*/
+define symbol __ICFEDIT_size_cstack__   = 0x400;
+define symbol __ICFEDIT_size_heap__     = 0x200;
+/**** End of ICF editor section. ###ICF###*/
+
+
+define memory mem with size = 4G;
+define region ROM_region   = mem:[from __ICFEDIT_region_ROM_start__   to __ICFEDIT_region_ROM_end__];
+define region RAM_region   = mem:[from __ICFEDIT_region_RAM_start__   to __ICFEDIT_region_RAM_end__];
+
+define block CSTACK    with alignment = 8, size = __ICFEDIT_size_cstack__   { };
+define block HEAP      with alignment = 8, size = __ICFEDIT_size_heap__     { };
+
+initialize by copy { readwrite };
+do not initialize  { section .noinit };
+
+place at address mem:__ICFEDIT_intvec_start__ { readonly section .intvec };
+
+place in ROM_region   { readonly };
+place in RAM_region   { readwrite,
+                        block CSTACK, block HEAP };

bsp/stm32f10x_HAL/Libraries/CMSIS/Device/ST/STM32F1xx/Source/Templates/iar/linker/stm32f100xb_sram.icf

@@ -0,0 +1,31 @@
+/*###ICF### Section handled by ICF editor, don't touch! ****/
+/*-Editor annotation file-*/
+/* IcfEditorFile="$TOOLKIT_DIR$\config\ide\IcfEditor\cortex_v1_0.xml" */
+/*-Specials-*/
+define symbol __ICFEDIT_intvec_start__ = 0x20000000;
+/*-Memory Regions-*/
+define symbol __ICFEDIT_region_ROM_start__ = 0x20000000 ;
+define symbol __ICFEDIT_region_ROM_end__   = 0x200013FF;
+define symbol __ICFEDIT_region_RAM_start__ = 0x20001400;
+define symbol __ICFEDIT_region_RAM_end__     = 0x20001FFF;
+/*-Sizes-*/
+define symbol __ICFEDIT_size_cstack__   = 0x400;
+define symbol __ICFEDIT_size_heap__     = 0x200;
+/**** End of ICF editor section. ###ICF###*/
+
+
+define memory mem with size = 4G;
+define region ROM_region   = mem:[from __ICFEDIT_region_ROM_start__   to __ICFEDIT_region_ROM_end__];
+define region RAM_region   = mem:[from __ICFEDIT_region_RAM_start__   to __ICFEDIT_region_RAM_end__];
+
+define block CSTACK    with alignment = 8, size = __ICFEDIT_size_cstack__   { };
+define block HEAP      with alignment = 8, size = __ICFEDIT_size_heap__     { };
+
+initialize by copy { readwrite };
+do not initialize  { section .noinit };
+
+place at address mem:__ICFEDIT_intvec_start__ { readonly section .intvec };
+
+place in ROM_region   { readonly };
+place in RAM_region   { readwrite,
+                        block CSTACK, block HEAP };

bsp/stm32f10x_HAL/Libraries/CMSIS/Device/ST/STM32F1xx/Source/Templates/iar/linker/stm32f100xe_flash.icf

@@ -0,0 +1,31 @@
+/*###ICF### Section handled by ICF editor, don't touch! ****/
+/*-Editor annotation file-*/
+/* IcfEditorFile="$TOOLKIT_DIR$\config\ide\IcfEditor\cortex_v1_0.xml" */
+/*-Specials-*/
+define symbol __ICFEDIT_intvec_start__ = 0x08000000;
+/*-Memory Regions-*/
+define symbol __ICFEDIT_region_ROM_start__   = 0x08000000 ;
+define symbol __ICFEDIT_region_ROM_end__     = 0x0807FFFF;
+define symbol __ICFEDIT_region_RAM_start__   = 0x20000000;
+define symbol __ICFEDIT_region_RAM_end__     = 0x20007FFF;
+/*-Sizes-*/
+define symbol __ICFEDIT_size_cstack__   = 0x400;
+define symbol __ICFEDIT_size_heap__     = 0x200;
+/**** End of ICF editor section. ###ICF###*/
+
+
+define memory mem with size = 4G;
+define region ROM_region   = mem:[from __ICFEDIT_region_ROM_start__   to __ICFEDIT_region_ROM_end__];
+define region RAM_region   = mem:[from __ICFEDIT_region_RAM_start__   to __ICFEDIT_region_RAM_end__];
+
+define block CSTACK    with alignment = 8, size = __ICFEDIT_size_cstack__   { };
+define block HEAP      with alignment = 8, size = __ICFEDIT_size_heap__     { };
+
+initialize by copy { readwrite };
+do not initialize  { section .noinit };
+
+place at address mem:__ICFEDIT_intvec_start__ { readonly section .intvec };
+
+place in ROM_region   { readonly };
+place in RAM_region   { readwrite,
+                        block CSTACK, block HEAP };

bsp/stm32f10x_HAL/Libraries/CMSIS/Device/ST/STM32F1xx/Source/Templates/iar/linker/stm32f100xe_sram.icf

@@ -0,0 +1,31 @@
+/*###ICF### Section handled by ICF editor, don't touch! ****/
+/*-Editor annotation file-*/
+/* IcfEditorFile="$TOOLKIT_DIR$\config\ide\IcfEditor\cortex_v1_0.xml" */
+/*-Specials-*/
+define symbol __ICFEDIT_intvec_start__ = 0x20000000;
+/*-Memory Regions-*/
+define symbol __ICFEDIT_region_ROM_start__ = 0x20000000 ;
+define symbol __ICFEDIT_region_ROM_end__   = 0x200013FF;
+define symbol __ICFEDIT_region_RAM_start__ = 0x20001400;
+define symbol __ICFEDIT_region_RAM_end__     = 0x20007FFF;
+/*-Sizes-*/
+define symbol __ICFEDIT_size_cstack__   = 0x400;
+define symbol __ICFEDIT_size_heap__     = 0x200;
+/**** End of ICF editor section. ###ICF###*/
+
+
+define memory mem with size = 4G;
+define region ROM_region   = mem:[from __ICFEDIT_region_ROM_start__   to __ICFEDIT_region_ROM_end__];
+define region RAM_region   = mem:[from __ICFEDIT_region_RAM_start__   to __ICFEDIT_region_RAM_end__];
+
+define block CSTACK    with alignment = 8, size = __ICFEDIT_size_cstack__   { };
+define block HEAP      with alignment = 8, size = __ICFEDIT_size_heap__     { };
+
+initialize by copy { readwrite };
+do not initialize  { section .noinit };
+
+place at address mem:__ICFEDIT_intvec_start__ { readonly section .intvec };
+
+place in ROM_region   { readonly };
+place in RAM_region   { readwrite,
+                        block CSTACK, block HEAP };

bsp/stm32f10x_HAL/Libraries/CMSIS/Device/ST/STM32F1xx/Source/Templates/iar/linker/stm32f101x6_flash.icf

@@ -0,0 +1,31 @@
+/*###ICF### Section handled by ICF editor, don't touch! ****/
+/*-Editor annotation file-*/
+/* IcfEditorFile="$TOOLKIT_DIR$\config\ide\IcfEditor\cortex_v1_0.xml" */
+/*-Specials-*/
+define symbol __ICFEDIT_intvec_start__ = 0x08000000;
+/*-Memory Regions-*/
+define symbol __ICFEDIT_region_ROM_start__   = 0x08000000 ;
+define symbol __ICFEDIT_region_ROM_end__     = 0x08007FFF;
+define symbol __ICFEDIT_region_RAM_start__   = 0x20000000;
+define symbol __ICFEDIT_region_RAM_end__     = 0x200017FF;
+/*-Sizes-*/
+define symbol __ICFEDIT_size_cstack__   = 0x400;
+define symbol __ICFEDIT_size_heap__     = 0x200;
+/**** End of ICF editor section. ###ICF###*/
+
+
+define memory mem with size = 4G;
+define region ROM_region   = mem:[from __ICFEDIT_region_ROM_start__   to __ICFEDIT_region_ROM_end__];
+define region RAM_region   = mem:[from __ICFEDIT_region_RAM_start__   to __ICFEDIT_region_RAM_end__];
+
+define block CSTACK    with alignment = 8, size = __ICFEDIT_size_cstack__   { };
+define block HEAP      with alignment = 8, size = __ICFEDIT_size_heap__     { };
+
+initialize by copy { readwrite };
+do not initialize  { section .noinit };
+
+place at address mem:__ICFEDIT_intvec_start__ { readonly section .intvec };
+
+place in ROM_region   { readonly };
+place in RAM_region   { readwrite,
+                        block CSTACK, block HEAP };

bsp/stm32f10x_HAL/Libraries/CMSIS/Device/ST/STM32F1xx/Source/Templates/iar/linker/stm32f101x6_sram.icf

@@ -0,0 +1,31 @@
+/*###ICF### Section handled by ICF editor, don't touch! ****/
+/*-Editor annotation file-*/
+/* IcfEditorFile="$TOOLKIT_DIR$\config\ide\IcfEditor\cortex_v1_0.xml" */
+/*-Specials-*/
+define symbol __ICFEDIT_intvec_start__ = 0x20000000;
+/*-Memory Regions-*/
+define symbol __ICFEDIT_region_ROM_start__ = 0x20000000 ;
+define symbol __ICFEDIT_region_ROM_end__   = 0x200013FF;
+define symbol __ICFEDIT_region_RAM_start__ = 0x20001400;
+define symbol __ICFEDIT_region_RAM_end__     = 0x200017FF;
+/*-Sizes-*/
+define symbol __ICFEDIT_size_cstack__   = 0x400;
+define symbol __ICFEDIT_size_heap__     = 0x200;
+/**** End of ICF editor section. ###ICF###*/
+
+
+define memory mem with size = 4G;
+define region ROM_region   = mem:[from __ICFEDIT_region_ROM_start__   to __ICFEDIT_region_ROM_end__];
+define region RAM_region   = mem:[from __ICFEDIT_region_RAM_start__   to __ICFEDIT_region_RAM_end__];
+
+define block CSTACK    with alignment = 8, size = __ICFEDIT_size_cstack__   { };
+define block HEAP      with alignment = 8, size = __ICFEDIT_size_heap__     { };
+
+initialize by copy { readwrite };
+do not initialize  { section .noinit };
+
+place at address mem:__ICFEDIT_intvec_start__ { readonly section .intvec };
+
+place in ROM_region   { readonly };
+place in RAM_region   { readwrite,
+                        block CSTACK, block HEAP };

bsp/stm32f10x_HAL/Libraries/CMSIS/Device/ST/STM32F1xx/Source/Templates/iar/linker/stm32f101xb_flash.icf

@@ -0,0 +1,31 @@
+/*###ICF### Section handled by ICF editor, don't touch! ****/
+/*-Editor annotation file-*/
+/* IcfEditorFile="$TOOLKIT_DIR$\config\ide\IcfEditor\cortex_v1_0.xml" */
+/*-Specials-*/
+define symbol __ICFEDIT_intvec_start__ = 0x08000000;
+/*-Memory Regions-*/
+define symbol __ICFEDIT_region_ROM_start__   = 0x08000000 ;
+define symbol __ICFEDIT_region_ROM_end__     = 0x0801FFFF;
+define symbol __ICFEDIT_region_RAM_start__   = 0x20000000;
+define symbol __ICFEDIT_region_RAM_end__     = 0x20003FFF;
+/*-Sizes-*/
+define symbol __ICFEDIT_size_cstack__   = 0x400;
+define symbol __ICFEDIT_size_heap__     = 0x200;
+/**** End of ICF editor section. ###ICF###*/
+
+
+define memory mem with size = 4G;
+define region ROM_region   = mem:[from __ICFEDIT_region_ROM_start__   to __ICFEDIT_region_ROM_end__];
+define region RAM_region   = mem:[from __ICFEDIT_region_RAM_start__   to __ICFEDIT_region_RAM_end__];
+
+define block CSTACK    with alignment = 8, size = __ICFEDIT_size_cstack__   { };
+define block HEAP      with alignment = 8, size = __ICFEDIT_size_heap__     { };
+
+initialize by copy { readwrite };
+do not initialize  { section .noinit };
+
+place at address mem:__ICFEDIT_intvec_start__ { readonly section .intvec };
+
+place in ROM_region   { readonly };
+place in RAM_region   { readwrite,
+                        block CSTACK, block HEAP };

bsp/stm32f10x_HAL/Libraries/CMSIS/Device/ST/STM32F1xx/Source/Templates/iar/linker/stm32f101xb_sram.icf

@@ -0,0 +1,31 @@
+/*###ICF### Section handled by ICF editor, don't touch! ****/
+/*-Editor annotation file-*/
+/* IcfEditorFile="$TOOLKIT_DIR$\config\ide\IcfEditor\cortex_v1_0.xml" */
+/*-Specials-*/
+define symbol __ICFEDIT_intvec_start__ = 0x20000000;
+/*-Memory Regions-*/
+define symbol __ICFEDIT_region_ROM_start__ = 0x20000000 ;
+define symbol __ICFEDIT_region_ROM_end__   = 0x200013FF;
+define symbol __ICFEDIT_region_RAM_start__ = 0x20001400;
+define symbol __ICFEDIT_region_RAM_end__     = 0x20003FFF;
+/*-Sizes-*/
+define symbol __ICFEDIT_size_cstack__   = 0x400;
+define symbol __ICFEDIT_size_heap__     = 0x200;
+/**** End of ICF editor section. ###ICF###*/
+
+
+define memory mem with size = 4G;
+define region ROM_region   = mem:[from __ICFEDIT_region_ROM_start__   to __ICFEDIT_region_ROM_end__];
+define region RAM_region   = mem:[from __ICFEDIT_region_RAM_start__   to __ICFEDIT_region_RAM_end__];
+
+define block CSTACK    with alignment = 8, size = __ICFEDIT_size_cstack__   { };
+define block HEAP      with alignment = 8, size = __ICFEDIT_size_heap__     { };
+
+initialize by copy { readwrite };
+do not initialize  { section .noinit };
+
+place at address mem:__ICFEDIT_intvec_start__ { readonly section .intvec };
+
+place in ROM_region   { readonly };
+place in RAM_region   { readwrite,
+                        block CSTACK, block HEAP };

bsp/stm32f10x_HAL/Libraries/CMSIS/Device/ST/STM32F1xx/Source/Templates/iar/linker/stm32f101xe_flash.icf

@@ -0,0 +1,31 @@
+/*###ICF### Section handled by ICF editor, don't touch! ****/
+/*-Editor annotation file-*/
+/* IcfEditorFile="$TOOLKIT_DIR$\config\ide\IcfEditor\cortex_v1_0.xml" */
+/*-Specials-*/
+define symbol __ICFEDIT_intvec_start__ = 0x08000000;
+/*-Memory Regions-*/
+define symbol __ICFEDIT_region_ROM_start__   = 0x08000000 ;
+define symbol __ICFEDIT_region_ROM_end__     = 0x0807FFFF;
+define symbol __ICFEDIT_region_RAM_start__   = 0x20000000;
+define symbol __ICFEDIT_region_RAM_end__     = 0x2000BFFF;
+/*-Sizes-*/
+define symbol __ICFEDIT_size_cstack__   = 0x400;
+define symbol __ICFEDIT_size_heap__     = 0x200;
+/**** End of ICF editor section. ###ICF###*/
+
+
+define memory mem with size = 4G;
+define region ROM_region   = mem:[from __ICFEDIT_region_ROM_start__   to __ICFEDIT_region_ROM_end__];
+define region RAM_region   = mem:[from __ICFEDIT_region_RAM_start__   to __ICFEDIT_region_RAM_end__];
+
+define block CSTACK    with alignment = 8, size = __ICFEDIT_size_cstack__   { };
+define block HEAP      with alignment = 8, size = __ICFEDIT_size_heap__     { };
+
+initialize by copy { readwrite };
+do not initialize  { section .noinit };
+
+place at address mem:__ICFEDIT_intvec_start__ { readonly section .intvec };
+
+place in ROM_region   { readonly };
+place in RAM_region   { readwrite,
+                        block CSTACK, block HEAP };

bsp/stm32f10x_HAL/Libraries/CMSIS/Device/ST/STM32F1xx/Source/Templates/iar/linker/stm32f101xe_sram.icf

@@ -0,0 +1,31 @@
+/*###ICF### Section handled by ICF editor, don't touch! ****/
+/*-Editor annotation file-*/
+/* IcfEditorFile="$TOOLKIT_DIR$\config\ide\IcfEditor\cortex_v1_0.xml" */
+/*-Specials-*/
+define symbol __ICFEDIT_intvec_start__ = 0x20000000;
+/*-Memory Regions-*/
+define symbol __ICFEDIT_region_ROM_start__ = 0x20000000 ;
+define symbol __ICFEDIT_region_ROM_end__   = 0x200013FF;
+define symbol __ICFEDIT_region_RAM_start__ = 0x20001400;
+define symbol __ICFEDIT_region_RAM_end__     = 0x2000BFFF;
+/*-Sizes-*/
+define symbol __ICFEDIT_size_cstack__   = 0x400;
+define symbol __ICFEDIT_size_heap__     = 0x200;
+/**** End of ICF editor section. ###ICF###*/
+
+
+define memory mem with size = 4G;
+define region ROM_region   = mem:[from __ICFEDIT_region_ROM_start__   to __ICFEDIT_region_ROM_end__];
+define region RAM_region   = mem:[from __ICFEDIT_region_RAM_start__   to __ICFEDIT_region_RAM_end__];
+
+define block CSTACK    with alignment = 8, size = __ICFEDIT_size_cstack__   { };
+define block HEAP      with alignment = 8, size = __ICFEDIT_size_heap__     { };
+
+initialize by copy { readwrite };
+do not initialize  { section .noinit };
+
+place at address mem:__ICFEDIT_intvec_start__ { readonly section .intvec };
+
+place in ROM_region   { readonly };
+place in RAM_region   { readwrite,
+                        block CSTACK, block HEAP };

bsp/stm32f10x_HAL/Libraries/CMSIS/Device/ST/STM32F1xx/Source/Templates/iar/linker/stm32f101xg_flash.icf

@@ -0,0 +1,31 @@
+/*###ICF### Section handled by ICF editor, don't touch! ****/
+/*-Editor annotation file-*/
+/* IcfEditorFile="$TOOLKIT_DIR$\config\ide\IcfEditor\cortex_v1_0.xml" */
+/*-Specials-*/
+define symbol __ICFEDIT_intvec_start__ = 0x08000000;
+/*-Memory Regions-*/
+define symbol __ICFEDIT_region_ROM_start__   = 0x08000000 ;
+define symbol __ICFEDIT_region_ROM_end__     = 0x080FFFFF;
+define symbol __ICFEDIT_region_RAM_start__   = 0x20000000;
+define symbol __ICFEDIT_region_RAM_end__     = 0x20013FFF;
+/*-Sizes-*/
+define symbol __ICFEDIT_size_cstack__   = 0x400;
+define symbol __ICFEDIT_size_heap__     = 0x200;
+/**** End of ICF editor section. ###ICF###*/
+
+
+define memory mem with size = 4G;
+define region ROM_region   = mem:[from __ICFEDIT_region_ROM_start__   to __ICFEDIT_region_ROM_end__];
+define region RAM_region   = mem:[from __ICFEDIT_region_RAM_start__   to __ICFEDIT_region_RAM_end__];
+
+define block CSTACK    with alignment = 8, size = __ICFEDIT_size_cstack__   { };
+define block HEAP      with alignment = 8, size = __ICFEDIT_size_heap__     { };
+
+initialize by copy { readwrite };
+do not initialize  { section .noinit };
+
+place at address mem:__ICFEDIT_intvec_start__ { readonly section .intvec };
+
+place in ROM_region   { readonly };
+place in RAM_region   { readwrite,
+                        block CSTACK, block HEAP };

bsp/stm32f10x_HAL/Libraries/CMSIS/Device/ST/STM32F1xx/Source/Templates/iar/linker/stm32f101xg_sram.icf

@@ -0,0 +1,31 @@
+/*###ICF### Section handled by ICF editor, don't touch! ****/
+/*-Editor annotation file-*/
+/* IcfEditorFile="$TOOLKIT_DIR$\config\ide\IcfEditor\cortex_v1_0.xml" */
+/*-Specials-*/
+define symbol __ICFEDIT_intvec_start__ = 0x20000000;
+/*-Memory Regions-*/
+define symbol __ICFEDIT_region_ROM_start__ = 0x20000000 ;
+define symbol __ICFEDIT_region_ROM_end__   = 0x200013FF;
+define symbol __ICFEDIT_region_RAM_start__ = 0x20001400;
+define symbol __ICFEDIT_region_RAM_end__     = 0x20013FFF;
+/*-Sizes-*/
+define symbol __ICFEDIT_size_cstack__   = 0x400;
+define symbol __ICFEDIT_size_heap__     = 0x200;
+/**** End of ICF editor section. ###ICF###*/
+
+
+define memory mem with size = 4G;
+define region ROM_region   = mem:[from __ICFEDIT_region_ROM_start__   to __ICFEDIT_region_ROM_end__];
+define region RAM_region   = mem:[from __ICFEDIT_region_RAM_start__   to __ICFEDIT_region_RAM_end__];
+
+define block CSTACK    with alignment = 8, size = __ICFEDIT_size_cstack__   { };
+define block HEAP      with alignment = 8, size = __ICFEDIT_size_heap__     { };
+
+initialize by copy { readwrite };
+do not initialize  { section .noinit };
+
+place at address mem:__ICFEDIT_intvec_start__ { readonly section .intvec };
+
+place in ROM_region   { readonly };
+place in RAM_region   { readwrite,
+                        block CSTACK, block HEAP };

bsp/stm32f10x_HAL/Libraries/CMSIS/Device/ST/STM32F1xx/Source/Templates/iar/linker/stm32f102x6_flash.icf

@@ -0,0 +1,31 @@
+/*###ICF### Section handled by ICF editor, don't touch! ****/
+/*-Editor annotation file-*/
+/* IcfEditorFile="$TOOLKIT_DIR$\config\ide\IcfEditor\cortex_v1_0.xml" */
+/*-Specials-*/
+define symbol __ICFEDIT_intvec_start__ = 0x08000000;
+/*-Memory Regions-*/
+define symbol __ICFEDIT_region_ROM_start__   = 0x08000000 ;
+define symbol __ICFEDIT_region_ROM_end__     = 0x08007FFF;
+define symbol __ICFEDIT_region_RAM_start__   = 0x20000000;
+define symbol __ICFEDIT_region_RAM_end__     = 0x200017FF;
+/*-Sizes-*/
+define symbol __ICFEDIT_size_cstack__   = 0x400;
+define symbol __ICFEDIT_size_heap__     = 0x200;
+/**** End of ICF editor section. ###ICF###*/
+
+
+define memory mem with size = 4G;
+define region ROM_region   = mem:[from __ICFEDIT_region_ROM_start__   to __ICFEDIT_region_ROM_end__];
+define region RAM_region   = mem:[from __ICFEDIT_region_RAM_start__   to __ICFEDIT_region_RAM_end__];
+
+define block CSTACK    with alignment = 8, size = __ICFEDIT_size_cstack__   { };
+define block HEAP      with alignment = 8, size = __ICFEDIT_size_heap__     { };
+
+initialize by copy { readwrite };
+do not initialize  { section .noinit };
+
+place at address mem:__ICFEDIT_intvec_start__ { readonly section .intvec };
+
+place in ROM_region   { readonly };
+place in RAM_region   { readwrite,
+                        block CSTACK, block HEAP };

bsp/stm32f10x_HAL/Libraries/CMSIS/Device/ST/STM32F1xx/Source/Templates/iar/linker/stm32f102x6_sram.icf

@@ -0,0 +1,31 @@
+/*###ICF### Section handled by ICF editor, don't touch! ****/
+/*-Editor annotation file-*/
+/* IcfEditorFile="$TOOLKIT_DIR$\config\ide\IcfEditor\cortex_v1_0.xml" */
+/*-Specials-*/
+define symbol __ICFEDIT_intvec_start__ = 0x20000000;
+/*-Memory Regions-*/
+define symbol __ICFEDIT_region_ROM_start__ = 0x20000000 ;
+define symbol __ICFEDIT_region_ROM_end__   = 0x200013FF;
+define symbol __ICFEDIT_region_RAM_start__ = 0x20001400;
+define symbol __ICFEDIT_region_RAM_end__     = 0x200017FF;
+/*-Sizes-*/
+define symbol __ICFEDIT_size_cstack__   = 0x400;
+define symbol __ICFEDIT_size_heap__     = 0x200;
+/**** End of ICF editor section. ###ICF###*/
+
+
+define memory mem with size = 4G;
+define region ROM_region   = mem:[from __ICFEDIT_region_ROM_start__   to __ICFEDIT_region_ROM_end__];
+define region RAM_region   = mem:[from __ICFEDIT_region_RAM_start__   to __ICFEDIT_region_RAM_end__];
+
+define block CSTACK    with alignment = 8, size = __ICFEDIT_size_cstack__   { };
+define block HEAP      with alignment = 8, size = __ICFEDIT_size_heap__     { };
+
+initialize by copy { readwrite };
+do not initialize  { section .noinit };
+
+place at address mem:__ICFEDIT_intvec_start__ { readonly section .intvec };
+
+place in ROM_region   { readonly };
+place in RAM_region   { readwrite,
+                        block CSTACK, block HEAP };

bsp/stm32f10x_HAL/Libraries/CMSIS/Device/ST/STM32F1xx/Source/Templates/iar/linker/stm32f102xb_flash.icf

@@ -0,0 +1,31 @@
+/*###ICF### Section handled by ICF editor, don't touch! ****/
+/*-Editor annotation file-*/
+/* IcfEditorFile="$TOOLKIT_DIR$\config\ide\IcfEditor\cortex_v1_0.xml" */
+/*-Specials-*/
+define symbol __ICFEDIT_intvec_start__ = 0x08000000;
+/*-Memory Regions-*/
+define symbol __ICFEDIT_region_ROM_start__   = 0x08000000 ;
+define symbol __ICFEDIT_region_ROM_end__     = 0x0801FFFF;
+define symbol __ICFEDIT_region_RAM_start__   = 0x20000000;
+define symbol __ICFEDIT_region_RAM_end__     = 0x20003FFF;
+/*-Sizes-*/
+define symbol __ICFEDIT_size_cstack__   = 0x400;
+define symbol __ICFEDIT_size_heap__     = 0x200;
+/**** End of ICF editor section. ###ICF###*/
+
+
+define memory mem with size = 4G;
+define region ROM_region   = mem:[from __ICFEDIT_region_ROM_start__   to __ICFEDIT_region_ROM_end__];
+define region RAM_region   = mem:[from __ICFEDIT_region_RAM_start__   to __ICFEDIT_region_RAM_end__];
+
+define block CSTACK    with alignment = 8, size = __ICFEDIT_size_cstack__   { };
+define block HEAP      with alignment = 8, size = __ICFEDIT_size_heap__     { };
+
+initialize by copy { readwrite };
+do not initialize  { section .noinit };
+
+place at address mem:__ICFEDIT_intvec_start__ { readonly section .intvec };
+
+place in ROM_region   { readonly };
+place in RAM_region   { readwrite,
+                        block CSTACK, block HEAP };

bsp/stm32f10x_HAL/Libraries/CMSIS/Device/ST/STM32F1xx/Source/Templates/iar/linker/stm32f102xb_sram.icf

@@ -0,0 +1,31 @@
+/*###ICF### Section handled by ICF editor, don't touch! ****/
+/*-Editor annotation file-*/
+/* IcfEditorFile="$TOOLKIT_DIR$\config\ide\IcfEditor\cortex_v1_0.xml" */
+/*-Specials-*/
+define symbol __ICFEDIT_intvec_start__ = 0x20000000;
+/*-Memory Regions-*/
+define symbol __ICFEDIT_region_ROM_start__ = 0x20000000 ;
+define symbol __ICFEDIT_region_ROM_end__   = 0x200013FF;
+define symbol __ICFEDIT_region_RAM_start__ = 0x20001400;
+define symbol __ICFEDIT_region_RAM_end__     = 0x20003FFF;
+/*-Sizes-*/
+define symbol __ICFEDIT_size_cstack__   = 0x400;
+define symbol __ICFEDIT_size_heap__     = 0x200;
+/**** End of ICF editor section. ###ICF###*/
+
+
+define memory mem with size = 4G;
+define region ROM_region   = mem:[from __ICFEDIT_region_ROM_start__   to __ICFEDIT_region_ROM_end__];
+define region RAM_region   = mem:[from __ICFEDIT_region_RAM_start__   to __ICFEDIT_region_RAM_end__];
+
+define block CSTACK    with alignment = 8, size = __ICFEDIT_size_cstack__   { };
+define block HEAP      with alignment = 8, size = __ICFEDIT_size_heap__     { };
+
+initialize by copy { readwrite };
+do not initialize  { section .noinit };
+
+place at address mem:__ICFEDIT_intvec_start__ { readonly section .intvec };
+
+place in ROM_region   { readonly };
+place in RAM_region   { readwrite,
+                        block CSTACK, block HEAP };

bsp/stm32f10x_HAL/Libraries/CMSIS/Device/ST/STM32F1xx/Source/Templates/iar/linker/stm32f103x6_flash.icf

@@ -0,0 +1,31 @@
+/*###ICF### Section handled by ICF editor, don't touch! ****/
+/*-Editor annotation file-*/
+/* IcfEditorFile="$TOOLKIT_DIR$\config\ide\IcfEditor\cortex_v1_0.xml" */
+/*-Specials-*/
+define symbol __ICFEDIT_intvec_start__ = 0x08000000;
+/*-Memory Regions-*/
+define symbol __ICFEDIT_region_ROM_start__   = 0x08000000 ;
+define symbol __ICFEDIT_region_ROM_end__     = 0x08007FFF;
+define symbol __ICFEDIT_region_RAM_start__   = 0x20000000;
+define symbol __ICFEDIT_region_RAM_end__     = 0x200027FF;
+/*-Sizes-*/
+define symbol __ICFEDIT_size_cstack__   = 0x400;
+define symbol __ICFEDIT_size_heap__     = 0x200;
+/**** End of ICF editor section. ###ICF###*/
+
+
+define memory mem with size = 4G;
+define region ROM_region   = mem:[from __ICFEDIT_region_ROM_start__   to __ICFEDIT_region_ROM_end__];
+define region RAM_region   = mem:[from __ICFEDIT_region_RAM_start__   to __ICFEDIT_region_RAM_end__];
+
+define block CSTACK    with alignment = 8, size = __ICFEDIT_size_cstack__   { };
+define block HEAP      with alignment = 8, size = __ICFEDIT_size_heap__     { };
+
+initialize by copy { readwrite };
+do not initialize  { section .noinit };
+
+place at address mem:__ICFEDIT_intvec_start__ { readonly section .intvec };
+
+place in ROM_region   { readonly };
+place in RAM_region   { readwrite,
+                        block CSTACK, block HEAP };

bsp/stm32f10x_HAL/Libraries/CMSIS/Device/ST/STM32F1xx/Source/Templates/iar/linker/stm32f103x6_sram.icf

@@ -0,0 +1,31 @@
+/*###ICF### Section handled by ICF editor, don't touch! ****/
+/*-Editor annotation file-*/
+/* IcfEditorFile="$TOOLKIT_DIR$\config\ide\IcfEditor\cortex_v1_0.xml" */
+/*-Specials-*/
+define symbol __ICFEDIT_intvec_start__ = 0x20000000;
+/*-Memory Regions-*/
+define symbol __ICFEDIT_region_ROM_start__ = 0x20000000 ;
+define symbol __ICFEDIT_region_ROM_end__   = 0x200013FF;
+define symbol __ICFEDIT_region_RAM_start__ = 0x20001400;
+define symbol __ICFEDIT_region_RAM_end__     = 0x200027FF;
+/*-Sizes-*/
+define symbol __ICFEDIT_size_cstack__   = 0x400;
+define symbol __ICFEDIT_size_heap__     = 0x200;
+/**** End of ICF editor section. ###ICF###*/
+
+
+define memory mem with size = 4G;
+define region ROM_region   = mem:[from __ICFEDIT_region_ROM_start__   to __ICFEDIT_region_ROM_end__];
+define region RAM_region   = mem:[from __ICFEDIT_region_RAM_start__   to __ICFEDIT_region_RAM_end__];
+
+define block CSTACK    with alignment = 8, size = __ICFEDIT_size_cstack__   { };
+define block HEAP      with alignment = 8, size = __ICFEDIT_size_heap__     { };
+
+initialize by copy { readwrite };
+do not initialize  { section .noinit };
+
+place at address mem:__ICFEDIT_intvec_start__ { readonly section .intvec };
+
+place in ROM_region   { readonly };
+place in RAM_region   { readwrite,
+                        block CSTACK, block HEAP };

bsp/stm32f10x_HAL/Libraries/CMSIS/Device/ST/STM32F1xx/Source/Templates/iar/linker/stm32f103xb_flash.icf

@@ -0,0 +1,31 @@
+/*###ICF### Section handled by ICF editor, don't touch! ****/
+/*-Editor annotation file-*/
+/* IcfEditorFile="$TOOLKIT_DIR$\config\ide\IcfEditor\cortex_v1_0.xml" */
+/*-Specials-*/
+define symbol __ICFEDIT_intvec_start__ = 0x08000000;
+/*-Memory Regions-*/
+define symbol __ICFEDIT_region_ROM_start__   = 0x08000000 ;
+define symbol __ICFEDIT_region_ROM_end__     = 0x0801FFFF;
+define symbol __ICFEDIT_region_RAM_start__   = 0x20000000;
+define symbol __ICFEDIT_region_RAM_end__     = 0x20004FFF;
+/*-Sizes-*/
+define symbol __ICFEDIT_size_cstack__   = 0x400;
+define symbol __ICFEDIT_size_heap__     = 0x200;
+/**** End of ICF editor section. ###ICF###*/
+
+
+define memory mem with size = 4G;
+define region ROM_region   = mem:[from __ICFEDIT_region_ROM_start__   to __ICFEDIT_region_ROM_end__];
+define region RAM_region   = mem:[from __ICFEDIT_region_RAM_start__   to __ICFEDIT_region_RAM_end__];
+
+define block CSTACK    with alignment = 8, size = __ICFEDIT_size_cstack__   { };
+define block HEAP      with alignment = 8, size = __ICFEDIT_size_heap__     { };
+
+initialize by copy { readwrite };
+do not initialize  { section .noinit };
+
+place at address mem:__ICFEDIT_intvec_start__ { readonly section .intvec };
+
+place in ROM_region   { readonly };
+place in RAM_region   { readwrite,
+                        block CSTACK, block HEAP };

bsp/stm32f10x_HAL/Libraries/CMSIS/Device/ST/STM32F1xx/Source/Templates/iar/linker/stm32f103xb_sram.icf

@@ -0,0 +1,31 @@
+/*###ICF### Section handled by ICF editor, don't touch! ****/
+/*-Editor annotation file-*/
+/* IcfEditorFile="$TOOLKIT_DIR$\config\ide\IcfEditor\cortex_v1_0.xml" */
+/*-Specials-*/
+define symbol __ICFEDIT_intvec_start__ = 0x20000000;
+/*-Memory Regions-*/
+define symbol __ICFEDIT_region_ROM_start__ = 0x20000000 ;
+define symbol __ICFEDIT_region_ROM_end__   = 0x200013FF;
+define symbol __ICFEDIT_region_RAM_start__ = 0x20001400;
+define symbol __ICFEDIT_region_RAM_end__     = 0x20004FFF;
+/*-Sizes-*/
+define symbol __ICFEDIT_size_cstack__   = 0x400;
+define symbol __ICFEDIT_size_heap__     = 0x200;
+/**** End of ICF editor section. ###ICF###*/
+
+
+define memory mem with size = 4G;
+define region ROM_region   = mem:[from __ICFEDIT_region_ROM_start__   to __ICFEDIT_region_ROM_end__];
+define region RAM_region   = mem:[from __ICFEDIT_region_RAM_start__   to __ICFEDIT_region_RAM_end__];
+
+define block CSTACK    with alignment = 8, size = __ICFEDIT_size_cstack__   { };
+define block HEAP      with alignment = 8, size = __ICFEDIT_size_heap__     { };
+
+initialize by copy { readwrite };
+do not initialize  { section .noinit };
+
+place at address mem:__ICFEDIT_intvec_start__ { readonly section .intvec };
+
+place in ROM_region   { readonly };
+place in RAM_region   { readwrite,
+                        block CSTACK, block HEAP };

bsp/stm32f10x_HAL/Libraries/CMSIS/Device/ST/STM32F1xx/Source/Templates/iar/linker/stm32f103xe_flash.icf

@@ -0,0 +1,31 @@
+/*###ICF### Section handled by ICF editor, don't touch! ****/
+/*-Editor annotation file-*/
+/* IcfEditorFile="$TOOLKIT_DIR$\config\ide\IcfEditor\cortex_v1_0.xml" */
+/*-Specials-*/
+define symbol __ICFEDIT_intvec_start__ = 0x08000000;
+/*-Memory Regions-*/
+define symbol __ICFEDIT_region_ROM_start__   = 0x08000000 ;
+define symbol __ICFEDIT_region_ROM_end__     = 0x0807FFFF;
+define symbol __ICFEDIT_region_RAM_start__   = 0x20000000;
+define symbol __ICFEDIT_region_RAM_end__     = 0x2000FFFF;
+/*-Sizes-*/
+define symbol __ICFEDIT_size_cstack__   = 0x400;
+define symbol __ICFEDIT_size_heap__     = 0x200;
+/**** End of ICF editor section. ###ICF###*/
+
+
+define memory mem with size = 4G;
+define region ROM_region   = mem:[from __ICFEDIT_region_ROM_start__   to __ICFEDIT_region_ROM_end__];
+define region RAM_region   = mem:[from __ICFEDIT_region_RAM_start__   to __ICFEDIT_region_RAM_end__];
+
+define block CSTACK    with alignment = 8, size = __ICFEDIT_size_cstack__   { };
+define block HEAP      with alignment = 8, size = __ICFEDIT_size_heap__     { };
+
+initialize by copy { readwrite };
+do not initialize  { section .noinit };
+
+place at address mem:__ICFEDIT_intvec_start__ { readonly section .intvec };
+
+place in ROM_region   { readonly };
+place in RAM_region   { readwrite,
+                        block CSTACK, block HEAP };

bsp/stm32f10x_HAL/Libraries/CMSIS/Device/ST/STM32F1xx/Source/Templates/iar/linker/stm32f103xe_sram.icf

@@ -0,0 +1,31 @@
+/*###ICF### Section handled by ICF editor, don't touch! ****/
+/*-Editor annotation file-*/
+/* IcfEditorFile="$TOOLKIT_DIR$\config\ide\IcfEditor\cortex_v1_0.xml" */
+/*-Specials-*/
+define symbol __ICFEDIT_intvec_start__ = 0x20000000;
+/*-Memory Regions-*/
+define symbol __ICFEDIT_region_ROM_start__ = 0x20000000 ;
+define symbol __ICFEDIT_region_ROM_end__   = 0x200013FF;
+define symbol __ICFEDIT_region_RAM_start__ = 0x20001400;
+define symbol __ICFEDIT_region_RAM_end__     = 0x2000FFFF;
+/*-Sizes-*/
+define symbol __ICFEDIT_size_cstack__   = 0x400;
+define symbol __ICFEDIT_size_heap__     = 0x200;
+/**** End of ICF editor section. ###ICF###*/
+
+
+define memory mem with size = 4G;
+define region ROM_region   = mem:[from __ICFEDIT_region_ROM_start__   to __ICFEDIT_region_ROM_end__];
+define region RAM_region   = mem:[from __ICFEDIT_region_RAM_start__   to __ICFEDIT_region_RAM_end__];
+
+define block CSTACK    with alignment = 8, size = __ICFEDIT_size_cstack__   { };
+define block HEAP      with alignment = 8, size = __ICFEDIT_size_heap__     { };
+
+initialize by copy { readwrite };
+do not initialize  { section .noinit };
+
+place at address mem:__ICFEDIT_intvec_start__ { readonly section .intvec };
+
+place in ROM_region   { readonly };
+place in RAM_region   { readwrite,
+                        block CSTACK, block HEAP };

bsp/stm32f10x_HAL/Libraries/CMSIS/Device/ST/STM32F1xx/Source/Templates/iar/linker/stm32f103xg_flash.icf

@@ -0,0 +1,31 @@
+/*###ICF### Section handled by ICF editor, don't touch! ****/
+/*-Editor annotation file-*/
+/* IcfEditorFile="$TOOLKIT_DIR$\config\ide\IcfEditor\cortex_v1_0.xml" */
+/*-Specials-*/
+define symbol __ICFEDIT_intvec_start__ = 0x08000000;
+/*-Memory Regions-*/
+define symbol __ICFEDIT_region_ROM_start__   = 0x08000000 ;
+define symbol __ICFEDIT_region_ROM_end__     = 0x080FFFFF;
+define symbol __ICFEDIT_region_RAM_start__   = 0x20000000;
+define symbol __ICFEDIT_region_RAM_end__     = 0x20017FFF;
+/*-Sizes-*/
+define symbol __ICFEDIT_size_cstack__   = 0x400;
+define symbol __ICFEDIT_size_heap__     = 0x200;
+/**** End of ICF editor section. ###ICF###*/
+
+
+define memory mem with size = 4G;
+define region ROM_region   = mem:[from __ICFEDIT_region_ROM_start__   to __ICFEDIT_region_ROM_end__];
+define region RAM_region   = mem:[from __ICFEDIT_region_RAM_start__   to __ICFEDIT_region_RAM_end__];
+
+define block CSTACK    with alignment = 8, size = __ICFEDIT_size_cstack__   { };
+define block HEAP      with alignment = 8, size = __ICFEDIT_size_heap__     { };
+
+initialize by copy { readwrite };
+do not initialize  { section .noinit };
+
+place at address mem:__ICFEDIT_intvec_start__ { readonly section .intvec };
+
+place in ROM_region   { readonly };
+place in RAM_region   { readwrite,
+                        block CSTACK, block HEAP };

bsp/stm32f10x_HAL/Libraries/CMSIS/Device/ST/STM32F1xx/Source/Templates/iar/linker/stm32f103xg_sram.icf

@@ -0,0 +1,31 @@
+/*###ICF### Section handled by ICF editor, don't touch! ****/
+/*-Editor annotation file-*/
+/* IcfEditorFile="$TOOLKIT_DIR$\config\ide\IcfEditor\cortex_v1_0.xml" */
+/*-Specials-*/
+define symbol __ICFEDIT_intvec_start__ = 0x20000000;
+/*-Memory Regions-*/
+define symbol __ICFEDIT_region_ROM_start__ = 0x20000000 ;
+define symbol __ICFEDIT_region_ROM_end__   = 0x200013FF;
+define symbol __ICFEDIT_region_RAM_start__ = 0x20001400;
+define symbol __ICFEDIT_region_RAM_end__     = 0x20017FFF;
+/*-Sizes-*/
+define symbol __ICFEDIT_size_cstack__   = 0x400;
+define symbol __ICFEDIT_size_heap__     = 0x200;
+/**** End of ICF editor section. ###ICF###*/
+
+
+define memory mem with size = 4G;
+define region ROM_region   = mem:[from __ICFEDIT_region_ROM_start__   to __ICFEDIT_region_ROM_end__];
+define region RAM_region   = mem:[from __ICFEDIT_region_RAM_start__   to __ICFEDIT_region_RAM_end__];
+
+define block CSTACK    with alignment = 8, size = __ICFEDIT_size_cstack__   { };
+define block HEAP      with alignment = 8, size = __ICFEDIT_size_heap__     { };
+
+initialize by copy { readwrite };
+do not initialize  { section .noinit };
+
+place at address mem:__ICFEDIT_intvec_start__ { readonly section .intvec };
+
+place in ROM_region   { readonly };
+place in RAM_region   { readwrite,
+                        block CSTACK, block HEAP };

bsp/stm32f10x_HAL/Libraries/CMSIS/Device/ST/STM32F1xx/Source/Templates/iar/linker/stm32f105xc_flash.icf

@@ -0,0 +1,31 @@
+/*###ICF### Section handled by ICF editor, don't touch! ****/
+/*-Editor annotation file-*/
+/* IcfEditorFile="$TOOLKIT_DIR$\config\ide\IcfEditor\cortex_v1_0.xml" */
+/*-Specials-*/
+define symbol __ICFEDIT_intvec_start__ = 0x08000000;
+/*-Memory Regions-*/
+define symbol __ICFEDIT_region_ROM_start__   = 0x08000000 ;
+define symbol __ICFEDIT_region_ROM_end__     = 0x0803FFFF;
+define symbol __ICFEDIT_region_RAM_start__   = 0x20000000;
+define symbol __ICFEDIT_region_RAM_end__     = 0x2000FFFF;
+/*-Sizes-*/
+define symbol __ICFEDIT_size_cstack__   = 0x400;
+define symbol __ICFEDIT_size_heap__     = 0x200;
+/**** End of ICF editor section. ###ICF###*/
+
+
+define memory mem with size = 4G;
+define region ROM_region   = mem:[from __ICFEDIT_region_ROM_start__   to __ICFEDIT_region_ROM_end__];
+define region RAM_region   = mem:[from __ICFEDIT_region_RAM_start__   to __ICFEDIT_region_RAM_end__];
+
+define block CSTACK    with alignment = 8, size = __ICFEDIT_size_cstack__   { };
+define block HEAP      with alignment = 8, size = __ICFEDIT_size_heap__     { };
+
+initialize by copy { readwrite };
+do not initialize  { section .noinit };
+
+place at address mem:__ICFEDIT_intvec_start__ { readonly section .intvec };
+
+place in ROM_region   { readonly };
+place in RAM_region   { readwrite,
+                        block CSTACK, block HEAP };

bsp/stm32f10x_HAL/Libraries/CMSIS/Device/ST/STM32F1xx/Source/Templates/iar/linker/stm32f105xc_sram.icf

@@ -0,0 +1,31 @@
+/*###ICF### Section handled by ICF editor, don't touch! ****/
+/*-Editor annotation file-*/
+/* IcfEditorFile="$TOOLKIT_DIR$\config\ide\IcfEditor\cortex_v1_0.xml" */
+/*-Specials-*/
+define symbol __ICFEDIT_intvec_start__ = 0x20000000;
+/*-Memory Regions-*/
+define symbol __ICFEDIT_region_ROM_start__ = 0x20000000 ;
+define symbol __ICFEDIT_region_ROM_end__   = 0x200013FF;
+define symbol __ICFEDIT_region_RAM_start__ = 0x20001400;
+define symbol __ICFEDIT_region_RAM_end__     = 0x2000FFFF;
+/*-Sizes-*/
+define symbol __ICFEDIT_size_cstack__   = 0x400;
+define symbol __ICFEDIT_size_heap__     = 0x200;
+/**** End of ICF editor section. ###ICF###*/
+
+
+define memory mem with size = 4G;
+define region ROM_region   = mem:[from __ICFEDIT_region_ROM_start__   to __ICFEDIT_region_ROM_end__];
+define region RAM_region   = mem:[from __ICFEDIT_region_RAM_start__   to __ICFEDIT_region_RAM_end__];
+
+define block CSTACK    with alignment = 8, size = __ICFEDIT_size_cstack__   { };
+define block HEAP      with alignment = 8, size = __ICFEDIT_size_heap__     { };
+
+initialize by copy { readwrite };
+do not initialize  { section .noinit };
+
+place at address mem:__ICFEDIT_intvec_start__ { readonly section .intvec };
+
+place in ROM_region   { readonly };
+place in RAM_region   { readwrite,
+                        block CSTACK, block HEAP };

bsp/stm32f10x_HAL/Libraries/CMSIS/Device/ST/STM32F1xx/Source/Templates/iar/linker/stm32f107xc_flash.icf

@@ -0,0 +1,31 @@
+/*###ICF### Section handled by ICF editor, don't touch! ****/
+/*-Editor annotation file-*/
+/* IcfEditorFile="$TOOLKIT_DIR$\config\ide\IcfEditor\cortex_v1_0.xml" */
+/*-Specials-*/
+define symbol __ICFEDIT_intvec_start__ = 0x08000000;
+/*-Memory Regions-*/
+define symbol __ICFEDIT_region_ROM_start__   = 0x08000000 ;
+define symbol __ICFEDIT_region_ROM_end__     = 0x0803FFFF;
+define symbol __ICFEDIT_region_RAM_start__   = 0x20000000;
+define symbol __ICFEDIT_region_RAM_end__     = 0x2000FFFF;
+/*-Sizes-*/
+define symbol __ICFEDIT_size_cstack__   = 0x400;
+define symbol __ICFEDIT_size_heap__     = 0x200;
+/**** End of ICF editor section. ###ICF###*/
+
+
+define memory mem with size = 4G;
+define region ROM_region   = mem:[from __ICFEDIT_region_ROM_start__   to __ICFEDIT_region_ROM_end__];
+define region RAM_region   = mem:[from __ICFEDIT_region_RAM_start__   to __ICFEDIT_region_RAM_end__];
+
+define block CSTACK    with alignment = 8, size = __ICFEDIT_size_cstack__   { };
+define block HEAP      with alignment = 8, size = __ICFEDIT_size_heap__     { };
+
+initialize by copy { readwrite };
+do not initialize  { section .noinit };
+
+place at address mem:__ICFEDIT_intvec_start__ { readonly section .intvec };
+
+place in ROM_region   { readonly };
+place in RAM_region   { readwrite,
+                        block CSTACK, block HEAP };

bsp/stm32f10x_HAL/Libraries/CMSIS/Device/ST/STM32F1xx/Source/Templates/iar/linker/stm32f107xc_sram.icf

@@ -0,0 +1,31 @@
+/*###ICF### Section handled by ICF editor, don't touch! ****/
+/*-Editor annotation file-*/
+/* IcfEditorFile="$TOOLKIT_DIR$\config\ide\IcfEditor\cortex_v1_0.xml" */
+/*-Specials-*/
+define symbol __ICFEDIT_intvec_start__ = 0x20000000;
+/*-Memory Regions-*/
+define symbol __ICFEDIT_region_ROM_start__ = 0x20000000 ;
+define symbol __ICFEDIT_region_ROM_end__   = 0x200013FF;
+define symbol __ICFEDIT_region_RAM_start__ = 0x20001400;
+define symbol __ICFEDIT_region_RAM_end__     = 0x2000FFFF;
+/*-Sizes-*/
+define symbol __ICFEDIT_size_cstack__   = 0x400;
+define symbol __ICFEDIT_size_heap__     = 0x200;
+/**** End of ICF editor section. ###ICF###*/
+
+
+define memory mem with size = 4G;
+define region ROM_region   = mem:[from __ICFEDIT_region_ROM_start__   to __ICFEDIT_region_ROM_end__];
+define region RAM_region   = mem:[from __ICFEDIT_region_RAM_start__   to __ICFEDIT_region_RAM_end__];
+
+define block CSTACK    with alignment = 8, size = __ICFEDIT_size_cstack__   { };
+define block HEAP      with alignment = 8, size = __ICFEDIT_size_heap__     { };
+
+initialize by copy { readwrite };
+do not initialize  { section .noinit };
+
+place at address mem:__ICFEDIT_intvec_start__ { readonly section .intvec };
+
+place in ROM_region   { readonly };
+place in RAM_region   { readwrite,
+                        block CSTACK, block HEAP };

bsp/stm32f10x_HAL/Libraries/CMSIS/Device/ST/STM32F1xx/Source/Templates/iar/startup_stm32f100xb.s

@@ -0,0 +1,413 @@
+;******************** (C) COPYRIGHT 2017 STMicroelectronics ********************
+;* File Name          : startup_stm32f100xb.s
+;* Author             : MCD Application Team
+;* Version            : V4.2.0
+;* Date               : 31-March-2017
+;* Description        : STM32F100xB Value Line Devices vector table 
+;*                      for EWARM toolchain.
+;*                      This module performs:
+;*                      - Set the initial SP
+;*                      - Configure the clock system
+;*                      - Set the initial PC == __iar_program_start,
+;*                      - Set the vector table entries with the exceptions ISR 
+;*                        address.
+;*                      After Reset the Cortex-M3 processor is in Thread mode,
+;*                      priority is Privileged, and the Stack is set to Main.
+;********************************************************************************
+;* 
+;* <h2><center>&copy; COPYRIGHT(c) 2017 STMicroelectronics</center></h2>
+;* 
+;* Redistribution and use in source and binary forms, with or without modification,
+;* are permitted provided that the following conditions are met:
+;*   1. Redistributions of source code must retain the above copyright notice,
+;*      this list of conditions and the following disclaimer.
+;*   2. Redistributions in binary form must reproduce the above copyright notice,
+;*      this list of conditions and the following disclaimer in the documentation
+;*      and/or other materials provided with the distribution.
+;*   3. Neither the name of STMicroelectronics nor the names of its contributors
+;*      may be used to endorse or promote products derived from this software
+;*      without specific prior written permission.
+;* 
+;* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+;* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+;* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+;* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+;* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+;* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+;* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+;* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+;* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+;* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+;* 
+;*******************************************************************************
+;
+;
+; The modules in this file are included in the libraries, and may be replaced
+; by any user-defined modules that define the PUBLIC symbol _program_start or
+; a user defined start symbol.
+; To override the cstartup defined in the library, simply add your modified
+; version to the workbench project.
+;
+; The vector table is normally located at address 0.
+; When debugging in RAM, it can be located in RAM, aligned to at least 2^6.
+; The name "__vector_table" has special meaning for C-SPY:
+; it is where the SP start value is found, and the NVIC vector
+; table register (VTOR) is initialized to this address if != 0.
+;
+; Cortex-M version
+;
+
+        MODULE  ?cstartup
+
+        ;; Forward declaration of sections.
+        SECTION CSTACK:DATA:NOROOT(3)
+
+        SECTION .intvec:CODE:NOROOT(2)
+
+        EXTERN  __iar_program_start
+        EXTERN  SystemInit        
+        PUBLIC  __vector_table
+
+        DATA
+__vector_table
+        DCD     sfe(CSTACK)
+        DCD     Reset_Handler             ; Reset Handler
+        DCD     NMI_Handler               ; NMI Handler
+        DCD     HardFault_Handler         ; Hard Fault Handler
+        DCD     MemManage_Handler         ; MPU Fault Handler
+        DCD     BusFault_Handler          ; Bus Fault Handler
+        DCD     UsageFault_Handler        ; Usage Fault Handler
+        DCD     0                         ; Reserved
+        DCD     0                         ; Reserved
+        DCD     0                         ; Reserved
+        DCD     0                         ; Reserved
+        DCD     SVC_Handler               ; SVCall Handler
+        DCD     DebugMon_Handler          ; Debug Monitor Handler
+        DCD     0                         ; Reserved
+        DCD     PendSV_Handler            ; PendSV Handler
+        DCD     SysTick_Handler           ; SysTick Handler
+
+         ; External Interrupts
+        DCD     WWDG_IRQHandler               ; Window Watchdog
+        DCD     PVD_IRQHandler                ; PVD through EXTI Line detect
+        DCD     TAMPER_IRQHandler             ; Tamper
+        DCD     RTC_IRQHandler                ; RTC
+        DCD     FLASH_IRQHandler              ; Flash
+        DCD     RCC_IRQHandler                ; RCC
+        DCD     EXTI0_IRQHandler              ; EXTI Line 0
+        DCD     EXTI1_IRQHandler              ; EXTI Line 1
+        DCD     EXTI2_IRQHandler              ; EXTI Line 2
+        DCD     EXTI3_IRQHandler              ; EXTI Line 3
+        DCD     EXTI4_IRQHandler              ; EXTI Line 4
+        DCD     DMA1_Channel1_IRQHandler      ; DMA1 Channel 1
+        DCD     DMA1_Channel2_IRQHandler      ; DMA1 Channel 2
+        DCD     DMA1_Channel3_IRQHandler      ; DMA1 Channel 3
+        DCD     DMA1_Channel4_IRQHandler      ; DMA1 Channel 4
+        DCD     DMA1_Channel5_IRQHandler      ; DMA1 Channel 5
+        DCD     DMA1_Channel6_IRQHandler      ; DMA1 Channel 6
+        DCD     DMA1_Channel7_IRQHandler      ; DMA1 Channel 7
+        DCD     ADC1_IRQHandler               ; ADC1
+        DCD     0                             ; Reserved
+        DCD     0                             ; Reserved
+        DCD     0                             ; Reserved
+        DCD     0                             ; Reserved
+        DCD     EXTI9_5_IRQHandler            ; EXTI Line 9..5
+        DCD     TIM1_BRK_TIM15_IRQHandler     ; TIM1 Break and TIM15
+        DCD     TIM1_UP_TIM16_IRQHandler      ; TIM1 Update and TIM16
+        DCD     TIM1_TRG_COM_TIM17_IRQHandler ; TIM1 Trigger and Commutation and TIM17
+        DCD     TIM1_CC_IRQHandler            ; TIM1 Capture Compare
+        DCD     TIM2_IRQHandler               ; TIM2
+        DCD     TIM3_IRQHandler               ; TIM3
+        DCD     TIM4_IRQHandler               ; TIM4
+        DCD     I2C1_EV_IRQHandler            ; I2C1 Event
+        DCD     I2C1_ER_IRQHandler            ; I2C1 Error
+        DCD     I2C2_EV_IRQHandler            ; I2C2 Event
+        DCD     I2C2_ER_IRQHandler            ; I2C2 Error
+        DCD     SPI1_IRQHandler               ; SPI1
+        DCD     SPI2_IRQHandler               ; SPI2
+        DCD     USART1_IRQHandler             ; USART1
+        DCD     USART2_IRQHandler             ; USART2
+        DCD     USART3_IRQHandler             ; USART3
+        DCD     EXTI15_10_IRQHandler          ; EXTI Line 15..10
+        DCD     RTC_Alarm_IRQHandler           ; RTC Alarm through EXTI Line
+        DCD     CEC_IRQHandler                ; HDMI-CEC
+        DCD     0                             ; Reserved
+        DCD     0                             ; Reserved
+        DCD     0                             ; Reserved
+        DCD     0                             ; Reserved
+        DCD     0                             ; Reserved
+        DCD     0                             ; Reserved
+        DCD     0                             ; Reserved
+        DCD     0                             ; Reserved
+        DCD     0                             ; Reserved
+        DCD     0                             ; Reserved
+        DCD     0                             ; Reserved                        
+        DCD     TIM6_DAC_IRQHandler           ; TIM6 and DAC underrun
+        DCD     TIM7_IRQHandler               ; TIM7                
+
+;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
+;;
+;; Default interrupt handlers.
+;;
+        THUMB
+
+        PUBWEAK Reset_Handler
+        SECTION .text:CODE:REORDER:NOROOT(2)
+Reset_Handler
+        LDR     R0, =SystemInit
+        BLX     R0
+        LDR     R0, =__iar_program_start
+        BX      R0
+        
+        PUBWEAK NMI_Handler
+        SECTION .text:CODE:REORDER:NOROOT(1)
+NMI_Handler
+        B NMI_Handler
+
+        PUBWEAK HardFault_Handler
+        SECTION .text:CODE:REORDER:NOROOT(1)
+HardFault_Handler
+        B HardFault_Handler
+
+        PUBWEAK MemManage_Handler
+        SECTION .text:CODE:REORDER:NOROOT(1)
+MemManage_Handler
+        B MemManage_Handler
+
+        PUBWEAK BusFault_Handler
+        SECTION .text:CODE:REORDER:NOROOT(1)
+BusFault_Handler
+        B BusFault_Handler
+
+        PUBWEAK UsageFault_Handler
+        SECTION .text:CODE:REORDER:NOROOT(1)
+UsageFault_Handler
+        B UsageFault_Handler
+
+        PUBWEAK SVC_Handler
+        SECTION .text:CODE:REORDER:NOROOT(1)
+SVC_Handler
+        B SVC_Handler
+
+        PUBWEAK DebugMon_Handler
+        SECTION .text:CODE:REORDER:NOROOT(1)
+DebugMon_Handler
+        B DebugMon_Handler
+
+        PUBWEAK PendSV_Handler
+        SECTION .text:CODE:REORDER:NOROOT(1)
+PendSV_Handler
+        B PendSV_Handler
+
+        PUBWEAK SysTick_Handler
+        SECTION .text:CODE:REORDER:NOROOT(1)
+SysTick_Handler
+        B SysTick_Handler
+
+        PUBWEAK WWDG_IRQHandler
+        SECTION .text:CODE:REORDER:NOROOT(1)
+WWDG_IRQHandler
+        B WWDG_IRQHandler
+
+        PUBWEAK PVD_IRQHandler
+        SECTION .text:CODE:REORDER:NOROOT(1)
+PVD_IRQHandler
+        B PVD_IRQHandler
+
+        PUBWEAK TAMPER_IRQHandler
+        SECTION .text:CODE:REORDER:NOROOT(1)
+TAMPER_IRQHandler
+        B TAMPER_IRQHandler
+
+        PUBWEAK RTC_IRQHandler
+        SECTION .text:CODE:REORDER:NOROOT(1)
+RTC_IRQHandler
+        B RTC_IRQHandler
+
+        PUBWEAK FLASH_IRQHandler
+        SECTION .text:CODE:REORDER:NOROOT(1)
+FLASH_IRQHandler
+        B FLASH_IRQHandler
+
+        PUBWEAK RCC_IRQHandler
+        SECTION .text:CODE:REORDER:NOROOT(1)
+RCC_IRQHandler
+        B RCC_IRQHandler
+
+        PUBWEAK EXTI0_IRQHandler
+        SECTION .text:CODE:REORDER:NOROOT(1)
+EXTI0_IRQHandler
+        B EXTI0_IRQHandler
+
+        PUBWEAK EXTI1_IRQHandler
+        SECTION .text:CODE:REORDER:NOROOT(1)
+EXTI1_IRQHandler
+        B EXTI1_IRQHandler
+
+        PUBWEAK EXTI2_IRQHandler
+        SECTION .text:CODE:REORDER:NOROOT(1)
+EXTI2_IRQHandler
+        B EXTI2_IRQHandler
+
+        PUBWEAK EXTI3_IRQHandler
+        SECTION .text:CODE:REORDER:NOROOT(1)
+EXTI3_IRQHandler
+        B EXTI3_IRQHandler
+
+        PUBWEAK EXTI4_IRQHandler
+        SECTION .text:CODE:REORDER:NOROOT(1)
+EXTI4_IRQHandler
+        B EXTI4_IRQHandler
+
+        PUBWEAK DMA1_Channel1_IRQHandler
+        SECTION .text:CODE:REORDER:NOROOT(1)
+DMA1_Channel1_IRQHandler
+        B DMA1_Channel1_IRQHandler
+
+        PUBWEAK DMA1_Channel2_IRQHandler
+        SECTION .text:CODE:REORDER:NOROOT(1)
+DMA1_Channel2_IRQHandler
+        B DMA1_Channel2_IRQHandler
+
+        PUBWEAK DMA1_Channel3_IRQHandler
+        SECTION .text:CODE:REORDER:NOROOT(1)
+DMA1_Channel3_IRQHandler
+        B DMA1_Channel3_IRQHandler
+
+        PUBWEAK DMA1_Channel4_IRQHandler
+        SECTION .text:CODE:REORDER:NOROOT(1)
+DMA1_Channel4_IRQHandler
+        B DMA1_Channel4_IRQHandler
+
+        PUBWEAK DMA1_Channel5_IRQHandler
+        SECTION .text:CODE:REORDER:NOROOT(1)
+DMA1_Channel5_IRQHandler
+        B DMA1_Channel5_IRQHandler
+
+        PUBWEAK DMA1_Channel6_IRQHandler
+        SECTION .text:CODE:REORDER:NOROOT(1)
+DMA1_Channel6_IRQHandler
+        B DMA1_Channel6_IRQHandler
+
+        PUBWEAK DMA1_Channel7_IRQHandler
+        SECTION .text:CODE:REORDER:NOROOT(1)
+DMA1_Channel7_IRQHandler
+        B DMA1_Channel7_IRQHandler
+
+        PUBWEAK ADC1_IRQHandler
+        SECTION .text:CODE:REORDER:NOROOT(1)
+ADC1_IRQHandler
+        B ADC1_IRQHandler
+
+        PUBWEAK EXTI9_5_IRQHandler
+        SECTION .text:CODE:REORDER:NOROOT(1)
+EXTI9_5_IRQHandler
+        B EXTI9_5_IRQHandler
+
+        PUBWEAK TIM1_BRK_TIM15_IRQHandler
+        SECTION .text:CODE:REORDER:NOROOT(1)
+TIM1_BRK_TIM15_IRQHandler
+        B TIM1_BRK_TIM15_IRQHandler
+
+        PUBWEAK TIM1_UP_TIM16_IRQHandler
+        SECTION .text:CODE:REORDER:NOROOT(1)
+TIM1_UP_TIM16_IRQHandler
+        B TIM1_UP_TIM16_IRQHandler
+
+        PUBWEAK TIM1_TRG_COM_TIM17_IRQHandler
+        SECTION .text:CODE:REORDER:NOROOT(1)
+TIM1_TRG_COM_TIM17_IRQHandler
+        B TIM1_TRG_COM_TIM17_IRQHandler
+
+        PUBWEAK TIM1_CC_IRQHandler
+        SECTION .text:CODE:REORDER:NOROOT(1)
+TIM1_CC_IRQHandler
+        B TIM1_CC_IRQHandler
+
+        PUBWEAK TIM2_IRQHandler
+        SECTION .text:CODE:REORDER:NOROOT(1)
+TIM2_IRQHandler
+        B TIM2_IRQHandler
+
+        PUBWEAK TIM3_IRQHandler
+        SECTION .text:CODE:REORDER:NOROOT(1)
+TIM3_IRQHandler
+        B TIM3_IRQHandler
+
+        PUBWEAK TIM4_IRQHandler
+        SECTION .text:CODE:REORDER:NOROOT(1)
+TIM4_IRQHandler
+        B TIM4_IRQHandler
+
+        PUBWEAK I2C1_EV_IRQHandler
+        SECTION .text:CODE:REORDER:NOROOT(1)
+I2C1_EV_IRQHandler
+        B I2C1_EV_IRQHandler
+
+        PUBWEAK I2C1_ER_IRQHandler
+        SECTION .text:CODE:REORDER:NOROOT(1)
+I2C1_ER_IRQHandler
+        B I2C1_ER_IRQHandler
+
+        PUBWEAK I2C2_EV_IRQHandler
+        SECTION .text:CODE:REORDER:NOROOT(1)
+I2C2_EV_IRQHandler
+        B I2C2_EV_IRQHandler
+
+        PUBWEAK I2C2_ER_IRQHandler
+        SECTION .text:CODE:REORDER:NOROOT(1)
+I2C2_ER_IRQHandler
+        B I2C2_ER_IRQHandler
+
+        PUBWEAK SPI1_IRQHandler
+        SECTION .text:CODE:REORDER:NOROOT(1)
+SPI1_IRQHandler
+        B SPI1_IRQHandler
+
+        PUBWEAK SPI2_IRQHandler
+        SECTION .text:CODE:REORDER:NOROOT(1)
+SPI2_IRQHandler
+        B SPI2_IRQHandler
+
+        PUBWEAK USART1_IRQHandler
+        SECTION .text:CODE:REORDER:NOROOT(1)
+USART1_IRQHandler
+        B USART1_IRQHandler
+
+        PUBWEAK USART2_IRQHandler
+        SECTION .text:CODE:REORDER:NOROOT(1)
+USART2_IRQHandler
+        B USART2_IRQHandler
+
+        PUBWEAK USART3_IRQHandler
+        SECTION .text:CODE:REORDER:NOROOT(1)
+USART3_IRQHandler
+        B USART3_IRQHandler
+
+        PUBWEAK EXTI15_10_IRQHandler
+        SECTION .text:CODE:REORDER:NOROOT(1)
+EXTI15_10_IRQHandler
+        B EXTI15_10_IRQHandler
+
+        PUBWEAK RTC_Alarm_IRQHandler
+        SECTION .text:CODE:REORDER:NOROOT(1)
+RTC_Alarm_IRQHandler
+        B RTC_Alarm_IRQHandler
+
+        PUBWEAK CEC_IRQHandler
+        SECTION .text:CODE:REORDER:NOROOT(1)
+CEC_IRQHandler
+        B CEC_IRQHandler
+
+        PUBWEAK TIM6_DAC_IRQHandler
+        SECTION .text:CODE:REORDER:NOROOT(1)
+TIM6_DAC_IRQHandler
+        B TIM6_DAC_IRQHandler
+
+        PUBWEAK TIM7_IRQHandler
+        SECTION .text:CODE:REORDER:NOROOT(1)
+TIM7_IRQHandler
+        B TIM7_IRQHandler                
+
+        END
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

bsp/stm32f10x_HAL/Libraries/CMSIS/Device/ST/STM32F1xx/Source/Templates/iar/startup_stm32f100xe.s

@@ -0,0 +1,479 @@
+;******************** (C) COPYRIGHT 2017 STMicroelectronics ********************
+;* File Name          : startup_stm32f100xe.s
+;* Author             : MCD Application Team
+;* Version            : V4.2.0
+;* Date               : 31-March-2017
+;* Description        : STM32F100xE Value Line Devices vector table 
+;*                      for EWARM toolchain.
+;*                      This module performs:
+;*                      - Set the initial SP
+;*                      - Set the initial PC == __iar_program_start,
+;*                      - Set the vector table entries with the exceptions ISR 
+;*                        address.
+;*                      After Reset the Cortex-M3 processor is in Thread mode,
+;*                      priority is Privileged, and the Stack is set to Main.
+;********************************************************************************
+;* 
+;* <h2><center>&copy; COPYRIGHT(c) 2017 STMicroelectronics</center></h2>
+;* 
+;* Redistribution and use in source and binary forms, with or without modification,
+;* are permitted provided that the following conditions are met:
+;*   1. Redistributions of source code must retain the above copyright notice,
+;*      this list of conditions and the following disclaimer.
+;*   2. Redistributions in binary form must reproduce the above copyright notice,
+;*      this list of conditions and the following disclaimer in the documentation
+;*      and/or other materials provided with the distribution.
+;*   3. Neither the name of STMicroelectronics nor the names of its contributors
+;*      may be used to endorse or promote products derived from this software
+;*      without specific prior written permission.
+;* 
+;* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+;* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+;* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+;* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+;* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+;* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+;* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+;* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+;* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+;* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+;* 
+;*******************************************************************************
+;
+;
+; The modules in this file are included in the libraries, and may be replaced
+; by any user-defined modules that define the PUBLIC symbol _program_start or
+; a user defined start symbol.
+; To override the cstartup defined in the library, simply add your modified
+; version to the workbench project.
+;
+; The vector table is normally located at address 0.
+; When debugging in RAM, it can be located in RAM, aligned to at least 2^6.
+; The name "__vector_table" has special meaning for C-SPY:
+; it is where the SP start value is found, and the NVIC vector
+; table register (VTOR) is initialized to this address if != 0.
+;
+; Cortex-M version
+;
+
+        MODULE  ?cstartup
+
+        ;; Forward declaration of sections.
+        SECTION CSTACK:DATA:NOROOT(3)
+
+        SECTION .intvec:CODE:NOROOT(2)
+
+        EXTERN  __iar_program_start
+        EXTERN  SystemInit        
+        PUBLIC  __vector_table
+
+        DATA
+__vector_table
+        DCD     sfe(CSTACK)
+        DCD     Reset_Handler             ; Reset Handler
+        DCD     NMI_Handler               ; NMI Handler
+        DCD     HardFault_Handler         ; Hard Fault Handler
+        DCD     MemManage_Handler         ; MPU Fault Handler
+        DCD     BusFault_Handler          ; Bus Fault Handler
+        DCD     UsageFault_Handler        ; Usage Fault Handler
+        DCD     0                         ; Reserved
+        DCD     0                         ; Reserved
+        DCD     0                         ; Reserved
+        DCD     0                         ; Reserved
+        DCD     SVC_Handler               ; SVCall Handler
+        DCD     DebugMon_Handler          ; Debug Monitor Handler
+        DCD     0                         ; Reserved
+        DCD     PendSV_Handler            ; PendSV Handler
+        DCD     SysTick_Handler           ; SysTick Handler
+
+         ; External Interrupts
+        DCD     WWDG_IRQHandler               ; Window Watchdog
+        DCD     PVD_IRQHandler                ; PVD through EXTI Line detect
+        DCD     TAMPER_IRQHandler             ; Tamper
+        DCD     RTC_IRQHandler                ; RTC
+        DCD     FLASH_IRQHandler              ; Flash
+        DCD     RCC_IRQHandler                ; RCC
+        DCD     EXTI0_IRQHandler              ; EXTI Line 0
+        DCD     EXTI1_IRQHandler              ; EXTI Line 1
+        DCD     EXTI2_IRQHandler              ; EXTI Line 2
+        DCD     EXTI3_IRQHandler              ; EXTI Line 3
+        DCD     EXTI4_IRQHandler              ; EXTI Line 4
+        DCD     DMA1_Channel1_IRQHandler      ; DMA1 Channel 1
+        DCD     DMA1_Channel2_IRQHandler      ; DMA1 Channel 2
+        DCD     DMA1_Channel3_IRQHandler      ; DMA1 Channel 3
+        DCD     DMA1_Channel4_IRQHandler      ; DMA1 Channel 4
+        DCD     DMA1_Channel5_IRQHandler      ; DMA1 Channel 5
+        DCD     DMA1_Channel6_IRQHandler      ; DMA1 Channel 6
+        DCD     DMA1_Channel7_IRQHandler      ; DMA1 Channel 7
+        DCD     ADC1_IRQHandler               ; ADC1
+        DCD     0                             ; Reserved
+        DCD     0                             ; Reserved
+        DCD     0                             ; Reserved
+        DCD     0                             ; Reserved
+        DCD     EXTI9_5_IRQHandler            ; EXTI Line 9..5
+        DCD     TIM1_BRK_TIM15_IRQHandler     ; TIM1 Break and TIM15
+        DCD     TIM1_UP_TIM16_IRQHandler      ; TIM1 Update and TIM16
+        DCD     TIM1_TRG_COM_TIM17_IRQHandler ; TIM1 Trigger and Commutation and TIM17
+        DCD     TIM1_CC_IRQHandler            ; TIM1 Capture Compare
+        DCD     TIM2_IRQHandler               ; TIM2
+        DCD     TIM3_IRQHandler               ; TIM3
+        DCD     TIM4_IRQHandler               ; TIM4
+        DCD     I2C1_EV_IRQHandler            ; I2C1 Event
+        DCD     I2C1_ER_IRQHandler            ; I2C1 Error
+        DCD     I2C2_EV_IRQHandler            ; I2C2 Event
+        DCD     I2C2_ER_IRQHandler            ; I2C2 Error
+        DCD     SPI1_IRQHandler               ; SPI1
+        DCD     SPI2_IRQHandler               ; SPI2
+        DCD     USART1_IRQHandler             ; USART1
+        DCD     USART2_IRQHandler             ; USART2
+        DCD     USART3_IRQHandler             ; USART3
+        DCD     EXTI15_10_IRQHandler          ; EXTI Line 15..10
+        DCD     RTC_Alarm_IRQHandler          ; RTC Alarm through EXTI Line
+        DCD     CEC_IRQHandler                ; HDMI CEC
+        DCD     TIM12_IRQHandler              ; TIM12
+        DCD     TIM13_IRQHandler              ; TIM13
+        DCD     TIM14_IRQHandler              ; TIM14
+        DCD     0                             ; Reserved
+        DCD     0                             ; Reserved
+        DCD     0                             ; Reserved
+        DCD     0                             ; Reserved
+        DCD     TIM5_IRQHandler               ; TIM5
+        DCD     SPI3_IRQHandler               ; SPI3
+        DCD     UART4_IRQHandler              ; UART4
+        DCD     UART5_IRQHandler              ; UART5                       
+        DCD     TIM6_DAC_IRQHandler           ; TIM6 and DAC underrun
+        DCD     TIM7_IRQHandler               ; TIM7     
+        DCD     DMA2_Channel1_IRQHandler      ; DMA2 Channel1
+        DCD     DMA2_Channel2_IRQHandler      ; DMA2 Channel2
+        DCD     DMA2_Channel3_IRQHandler      ; DMA2 Channel3
+        DCD     DMA2_Channel4_5_IRQHandler    ; DMA2 Channel4 & Channel5 if MISC_REMAP is not set 
+                                              ; or DMA2 Channel4 if MISC_REMAP is set
+        DCD     DMA2_Channel5_IRQHandler      ; DMA2 Channel5 if MISC_REMAP is set
+
+;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
+;;
+;; Default interrupt handlers.
+;;
+        THUMB
+
+        PUBWEAK Reset_Handler
+        SECTION .text:CODE:REORDER:NOROOT(2)
+Reset_Handler
+        LDR     R0, =SystemInit
+        BLX     R0
+        LDR     R0, =__iar_program_start
+        BX      R0
+        
+        PUBWEAK NMI_Handler
+        SECTION .text:CODE:REORDER:NOROOT(1)
+NMI_Handler
+        B NMI_Handler
+
+        PUBWEAK HardFault_Handler
+        SECTION .text:CODE:REORDER:NOROOT(1)
+HardFault_Handler
+        B HardFault_Handler
+
+        PUBWEAK MemManage_Handler
+        SECTION .text:CODE:REORDER:NOROOT(1)
+MemManage_Handler
+        B MemManage_Handler
+
+        PUBWEAK BusFault_Handler
+        SECTION .text:CODE:REORDER:NOROOT(1)
+BusFault_Handler
+        B BusFault_Handler
+
+        PUBWEAK UsageFault_Handler
+        SECTION .text:CODE:REORDER:NOROOT(1)
+UsageFault_Handler
+        B UsageFault_Handler
+
+        PUBWEAK SVC_Handler
+        SECTION .text:CODE:REORDER:NOROOT(1)
+SVC_Handler
+        B SVC_Handler
+
+        PUBWEAK DebugMon_Handler
+        SECTION .text:CODE:REORDER:NOROOT(1)
+DebugMon_Handler
+        B DebugMon_Handler
+
+        PUBWEAK PendSV_Handler
+        SECTION .text:CODE:REORDER:NOROOT(1)
+PendSV_Handler
+        B PendSV_Handler
+
+        PUBWEAK SysTick_Handler
+        SECTION .text:CODE:REORDER:NOROOT(1)
+SysTick_Handler
+        B SysTick_Handler
+
+        PUBWEAK WWDG_IRQHandler
+        SECTION .text:CODE:REORDER:NOROOT(1)
+WWDG_IRQHandler
+        B WWDG_IRQHandler
+
+        PUBWEAK PVD_IRQHandler
+        SECTION .text:CODE:REORDER:NOROOT(1)
+PVD_IRQHandler
+        B PVD_IRQHandler
+
+        PUBWEAK TAMPER_IRQHandler
+        SECTION .text:CODE:REORDER:NOROOT(1)
+TAMPER_IRQHandler
+        B TAMPER_IRQHandler
+
+        PUBWEAK RTC_IRQHandler
+        SECTION .text:CODE:REORDER:NOROOT(1)
+RTC_IRQHandler
+        B RTC_IRQHandler
+
+        PUBWEAK FLASH_IRQHandler
+        SECTION .text:CODE:REORDER:NOROOT(1)
+FLASH_IRQHandler
+        B FLASH_IRQHandler
+
+        PUBWEAK RCC_IRQHandler
+        SECTION .text:CODE:REORDER:NOROOT(1)
+RCC_IRQHandler
+        B RCC_IRQHandler
+
+        PUBWEAK EXTI0_IRQHandler
+        SECTION .text:CODE:REORDER:NOROOT(1)
+EXTI0_IRQHandler
+        B EXTI0_IRQHandler
+
+        PUBWEAK EXTI1_IRQHandler
+        SECTION .text:CODE:REORDER:NOROOT(1)
+EXTI1_IRQHandler
+        B EXTI1_IRQHandler
+
+        PUBWEAK EXTI2_IRQHandler
+        SECTION .text:CODE:REORDER:NOROOT(1)
+EXTI2_IRQHandler
+        B EXTI2_IRQHandler
+
+        PUBWEAK EXTI3_IRQHandler
+        SECTION .text:CODE:REORDER:NOROOT(1)
+EXTI3_IRQHandler
+        B EXTI3_IRQHandler
+
+        PUBWEAK EXTI4_IRQHandler
+        SECTION .text:CODE:REORDER:NOROOT(1)
+EXTI4_IRQHandler
+        B EXTI4_IRQHandler
+
+        PUBWEAK DMA1_Channel1_IRQHandler
+        SECTION .text:CODE:REORDER:NOROOT(1)
+DMA1_Channel1_IRQHandler
+        B DMA1_Channel1_IRQHandler
+
+        PUBWEAK DMA1_Channel2_IRQHandler
+        SECTION .text:CODE:REORDER:NOROOT(1)
+DMA1_Channel2_IRQHandler
+        B DMA1_Channel2_IRQHandler
+
+        PUBWEAK DMA1_Channel3_IRQHandler
+        SECTION .text:CODE:REORDER:NOROOT(1)
+DMA1_Channel3_IRQHandler
+        B DMA1_Channel3_IRQHandler
+
+        PUBWEAK DMA1_Channel4_IRQHandler
+        SECTION .text:CODE:REORDER:NOROOT(1)
+DMA1_Channel4_IRQHandler
+        B DMA1_Channel4_IRQHandler
+
+        PUBWEAK DMA1_Channel5_IRQHandler
+        SECTION .text:CODE:REORDER:NOROOT(1)
+DMA1_Channel5_IRQHandler
+        B DMA1_Channel5_IRQHandler
+
+        PUBWEAK DMA1_Channel6_IRQHandler
+        SECTION .text:CODE:REORDER:NOROOT(1)
+DMA1_Channel6_IRQHandler
+        B DMA1_Channel6_IRQHandler
+
+        PUBWEAK DMA1_Channel7_IRQHandler
+        SECTION .text:CODE:REORDER:NOROOT(1)
+DMA1_Channel7_IRQHandler
+        B DMA1_Channel7_IRQHandler
+
+        PUBWEAK ADC1_IRQHandler
+        SECTION .text:CODE:REORDER:NOROOT(1)
+ADC1_IRQHandler
+        B ADC1_IRQHandler
+
+        PUBWEAK EXTI9_5_IRQHandler
+        SECTION .text:CODE:REORDER:NOROOT(1)
+EXTI9_5_IRQHandler
+        B EXTI9_5_IRQHandler
+
+        PUBWEAK TIM1_BRK_TIM15_IRQHandler
+        SECTION .text:CODE:REORDER:NOROOT(1)
+TIM1_BRK_TIM15_IRQHandler
+        B TIM1_BRK_TIM15_IRQHandler
+
+        PUBWEAK TIM1_UP_TIM16_IRQHandler
+        SECTION .text:CODE:REORDER:NOROOT(1)
+TIM1_UP_TIM16_IRQHandler
+        B TIM1_UP_TIM16_IRQHandler
+
+        PUBWEAK TIM1_TRG_COM_TIM17_IRQHandler
+        SECTION .text:CODE:REORDER:NOROOT(1)
+TIM1_TRG_COM_TIM17_IRQHandler
+        B TIM1_TRG_COM_TIM17_IRQHandler
+
+        PUBWEAK TIM1_CC_IRQHandler
+        SECTION .text:CODE:REORDER:NOROOT(1)
+TIM1_CC_IRQHandler
+        B TIM1_CC_IRQHandler
+
+        PUBWEAK TIM2_IRQHandler
+        SECTION .text:CODE:REORDER:NOROOT(1)
+TIM2_IRQHandler
+        B TIM2_IRQHandler
+
+        PUBWEAK TIM3_IRQHandler
+        SECTION .text:CODE:REORDER:NOROOT(1)
+TIM3_IRQHandler
+        B TIM3_IRQHandler
+
+        PUBWEAK TIM4_IRQHandler
+        SECTION .text:CODE:REORDER:NOROOT(1)
+TIM4_IRQHandler
+        B TIM4_IRQHandler
+
+        PUBWEAK I2C1_EV_IRQHandler
+        SECTION .text:CODE:REORDER:NOROOT(1)
+I2C1_EV_IRQHandler
+        B I2C1_EV_IRQHandler
+
+        PUBWEAK I2C1_ER_IRQHandler
+        SECTION .text:CODE:REORDER:NOROOT(1)
+I2C1_ER_IRQHandler
+        B I2C1_ER_IRQHandler
+
+        PUBWEAK I2C2_EV_IRQHandler
+        SECTION .text:CODE:REORDER:NOROOT(1)
+I2C2_EV_IRQHandler
+        B I2C2_EV_IRQHandler
+
+        PUBWEAK I2C2_ER_IRQHandler
+        SECTION .text:CODE:REORDER:NOROOT(1)
+I2C2_ER_IRQHandler
+        B I2C2_ER_IRQHandler
+
+        PUBWEAK SPI1_IRQHandler
+        SECTION .text:CODE:REORDER:NOROOT(1)
+SPI1_IRQHandler
+        B SPI1_IRQHandler
+
+        PUBWEAK SPI2_IRQHandler
+        SECTION .text:CODE:REORDER:NOROOT(1)
+SPI2_IRQHandler
+        B SPI2_IRQHandler
+
+        PUBWEAK USART1_IRQHandler
+        SECTION .text:CODE:REORDER:NOROOT(1)
+USART1_IRQHandler
+        B USART1_IRQHandler
+
+        PUBWEAK USART2_IRQHandler
+        SECTION .text:CODE:REORDER:NOROOT(1)
+USART2_IRQHandler
+        B USART2_IRQHandler
+
+        PUBWEAK USART3_IRQHandler
+        SECTION .text:CODE:REORDER:NOROOT(1)
+USART3_IRQHandler
+        B USART3_IRQHandler
+
+        PUBWEAK EXTI15_10_IRQHandler
+        SECTION .text:CODE:REORDER:NOROOT(1)
+EXTI15_10_IRQHandler
+        B EXTI15_10_IRQHandler
+
+        PUBWEAK RTC_Alarm_IRQHandler
+        SECTION .text:CODE:REORDER:NOROOT(1)
+RTC_Alarm_IRQHandler
+        B RTC_Alarm_IRQHandler
+
+        
+        PUBWEAK CEC_IRQHandler
+        SECTION .text:CODE:REORDER:NOROOT(1)
+CEC_IRQHandler
+        B CEC_IRQHandler
+
+        PUBWEAK TIM12_IRQHandler
+        SECTION .text:CODE:REORDER:NOROOT(1)
+TIM12_IRQHandler
+        B TIM12_IRQHandler
+
+        PUBWEAK TIM13_IRQHandler
+        SECTION .text:CODE:REORDER:NOROOT(1)
+TIM13_IRQHandler
+        B TIM13_IRQHandler
+
+        PUBWEAK TIM14_IRQHandler
+        SECTION .text:CODE:REORDER:NOROOT(1)
+TIM14_IRQHandler
+        B TIM14_IRQHandler
+
+        PUBWEAK TIM5_IRQHandler
+        SECTION .text:CODE:REORDER:NOROOT(1)
+TIM5_IRQHandler
+        B TIM5_IRQHandler
+
+        PUBWEAK SPI3_IRQHandler
+        SECTION .text:CODE:REORDER:NOROOT(1)
+SPI3_IRQHandler
+        B SPI3_IRQHandler
+
+        PUBWEAK UART4_IRQHandler
+        SECTION .text:CODE:REORDER:NOROOT(1)
+UART4_IRQHandler
+        B UART4_IRQHandler
+
+        PUBWEAK UART5_IRQHandler
+        SECTION .text:CODE:REORDER:NOROOT(1)
+UART5_IRQHandler
+        B UART5_IRQHandler
+        
+        PUBWEAK TIM6_DAC_IRQHandler
+        SECTION .text:CODE:REORDER:NOROOT(1)
+TIM6_DAC_IRQHandler
+        B TIM6_DAC_IRQHandler
+
+        PUBWEAK TIM7_IRQHandler
+        SECTION .text:CODE:REORDER:NOROOT(1)
+TIM7_IRQHandler
+        B TIM7_IRQHandler                
+
+        PUBWEAK DMA2_Channel1_IRQHandler
+        SECTION .text:CODE:REORDER:NOROOT(1)
+DMA2_Channel1_IRQHandler
+        B DMA2_Channel1_IRQHandler
+
+        PUBWEAK DMA2_Channel2_IRQHandler
+        SECTION .text:CODE:REORDER:NOROOT(1)
+DMA2_Channel2_IRQHandler
+        B DMA2_Channel2_IRQHandler
+
+        PUBWEAK DMA2_Channel3_IRQHandler
+        SECTION .text:CODE:REORDER:NOROOT(1)
+DMA2_Channel3_IRQHandler
+        B DMA2_Channel3_IRQHandler
+
+        PUBWEAK DMA2_Channel4_5_IRQHandler
+        SECTION .text:CODE:REORDER:NOROOT(1)
+DMA2_Channel4_5_IRQHandler
+        B DMA2_Channel4_5_IRQHandler
+
+        PUBWEAK DMA2_Channel5_IRQHandler
+        SECTION .text:CODE:REORDER:NOROOT(1)
+DMA2_Channel5_IRQHandler
+        B DMA2_Channel5_IRQHandler
+                
+        END
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

bsp/stm32f10x_HAL/Libraries/CMSIS/Device/ST/STM32F1xx/Source/Templates/iar/startup_stm32f101x6.s

@@ -0,0 +1,340 @@
+;******************** (C) COPYRIGHT 2017 STMicroelectronics ********************
+;* File Name          : startup_stm32f101x6.s
+;* Author             : MCD Application Team
+;* Version            : V4.2.0
+;* Date               : 31-March-2017
+;* Description        : STM32F101x6 Access Line Devices vector table for EWARM
+;*                      toolchain.
+;*                      This module performs:
+;*                      - Set the initial SP
+;*                      - Configure the clock system
+;*                      - Set the initial PC == __iar_program_start,
+;*                      - Set the vector table entries with the exceptions ISR 
+;*                        address.
+;*                      After Reset the Cortex-M3 processor is in Thread mode,
+;*                      priority is Privileged, and the Stack is set to Main.
+;********************************************************************************
+;* 
+;* <h2><center>&copy; COPYRIGHT(c) 2017 STMicroelectronics</center></h2>
+;* 
+;* Redistribution and use in source and binary forms, with or without modification,
+;* are permitted provided that the following conditions are met:
+;*   1. Redistributions of source code must retain the above copyright notice,
+;*      this list of conditions and the following disclaimer.
+;*   2. Redistributions in binary form must reproduce the above copyright notice,
+;*      this list of conditions and the following disclaimer in the documentation
+;*      and/or other materials provided with the distribution.
+;*   3. Neither the name of STMicroelectronics nor the names of its contributors
+;*      may be used to endorse or promote products derived from this software
+;*      without specific prior written permission.
+;* 
+;* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+;* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+;* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+;* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+;* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+;* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+;* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+;* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+;* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+;* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+;* 
+;*******************************************************************************
+;
+;
+; The modules in this file are included in the libraries, and may be replaced
+; by any user-defined modules that define the PUBLIC symbol _program_start or
+; a user defined start symbol.
+; To override the cstartup defined in the library, simply add your modified
+; version to the workbench project.
+;
+; The vector table is normally located at address 0.
+; When debugging in RAM, it can be located in RAM, aligned to at least 2^6.
+; The name "__vector_table" has special meaning for C-SPY:
+; it is where the SP start value is found, and the NVIC vector
+; table register (VTOR) is initialized to this address if != 0.
+;
+; Cortex-M version
+;
+
+        MODULE  ?cstartup
+
+        ;; Forward declaration of sections.
+        SECTION CSTACK:DATA:NOROOT(3)
+
+        SECTION .intvec:CODE:NOROOT(2)
+
+        EXTERN  __iar_program_start
+        EXTERN  SystemInit        
+        PUBLIC  __vector_table
+
+        DATA
+__vector_table
+        DCD     sfe(CSTACK)
+        DCD     Reset_Handler             ; Reset Handler
+        DCD     NMI_Handler               ; NMI Handler
+        DCD     HardFault_Handler         ; Hard Fault Handler
+        DCD     MemManage_Handler         ; MPU Fault Handler
+        DCD     BusFault_Handler          ; Bus Fault Handler
+        DCD     UsageFault_Handler        ; Usage Fault Handler
+        DCD     0                         ; Reserved
+        DCD     0                         ; Reserved
+        DCD     0                         ; Reserved
+        DCD     0                         ; Reserved
+        DCD     SVC_Handler               ; SVCall Handler
+        DCD     DebugMon_Handler          ; Debug Monitor Handler
+        DCD     0                         ; Reserved
+        DCD     PendSV_Handler            ; PendSV Handler
+        DCD     SysTick_Handler           ; SysTick Handler
+
+         ; External Interrupts
+        DCD     WWDG_IRQHandler           ; Window Watchdog
+        DCD     PVD_IRQHandler            ; PVD through EXTI Line detect
+        DCD     TAMPER_IRQHandler         ; Tamper
+        DCD     RTC_IRQHandler            ; RTC
+        DCD     FLASH_IRQHandler          ; Flash
+        DCD     RCC_IRQHandler            ; RCC
+        DCD     EXTI0_IRQHandler          ; EXTI Line 0
+        DCD     EXTI1_IRQHandler          ; EXTI Line 1
+        DCD     EXTI2_IRQHandler          ; EXTI Line 2
+        DCD     EXTI3_IRQHandler          ; EXTI Line 3
+        DCD     EXTI4_IRQHandler          ; EXTI Line 4
+        DCD     DMA1_Channel1_IRQHandler  ; DMA1 Channel 1
+        DCD     DMA1_Channel2_IRQHandler  ; DMA1 Channel 2
+        DCD     DMA1_Channel3_IRQHandler  ; DMA1 Channel 3
+        DCD     DMA1_Channel4_IRQHandler  ; DMA1 Channel 4
+        DCD     DMA1_Channel5_IRQHandler  ; DMA1 Channel 5
+        DCD     DMA1_Channel6_IRQHandler  ; DMA1 Channel 6
+        DCD     DMA1_Channel7_IRQHandler  ; DMA1 Channel 7
+        DCD     ADC1_IRQHandler         ; ADC1
+        DCD     0                         ; Reserved
+        DCD     0                         ; Reserved
+        DCD     0                         ; Reserved
+        DCD     0                         ; Reserved
+        DCD     EXTI9_5_IRQHandler        ; EXTI Line 9..5
+        DCD     0                         ; Reserved
+        DCD     0                         ; Reserved
+        DCD     0                         ; Reserved
+        DCD     0                         ; Reserved
+        DCD     TIM2_IRQHandler           ; TIM2
+        DCD     TIM3_IRQHandler           ; TIM3
+        DCD     0                         ; Reserved
+        DCD     I2C1_EV_IRQHandler        ; I2C1 Event
+        DCD     I2C1_ER_IRQHandler        ; I2C1 Error
+        DCD     0                         ; Reserved
+        DCD     0                         ; Reserved
+        DCD     SPI1_IRQHandler           ; SPI1
+        DCD     0                         ; Reserved
+        DCD     USART1_IRQHandler         ; USART1
+        DCD     USART2_IRQHandler         ; USART2
+        DCD     0                         ; Reserved
+        DCD     EXTI15_10_IRQHandler      ; EXTI Line 15..10
+        DCD     RTC_Alarm_IRQHandler       ; RTC Alarm through EXTI Line
+        DCD     0                         ; Reserved
+
+;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
+;;
+;; Default interrupt handlers.
+;;
+        THUMB
+
+        PUBWEAK Reset_Handler
+        SECTION .text:CODE:REORDER:NOROOT(2)
+Reset_Handler
+        LDR     R0, =SystemInit
+        BLX     R0
+        LDR     R0, =__iar_program_start
+        BX      R0
+        
+        PUBWEAK NMI_Handler
+        SECTION .text:CODE:REORDER:NOROOT(1)
+NMI_Handler
+        B NMI_Handler
+        
+        PUBWEAK HardFault_Handler
+        SECTION .text:CODE:REORDER:NOROOT(1)
+HardFault_Handler
+        B HardFault_Handler
+        
+        PUBWEAK MemManage_Handler
+        SECTION .text:CODE:REORDER:NOROOT(1)
+MemManage_Handler
+        B MemManage_Handler
+        
+        PUBWEAK BusFault_Handler
+        SECTION .text:CODE:REORDER:NOROOT(1)
+BusFault_Handler
+        B BusFault_Handler
+        
+        PUBWEAK UsageFault_Handler
+        SECTION .text:CODE:REORDER:NOROOT(1)
+UsageFault_Handler
+        B UsageFault_Handler
+        
+        PUBWEAK SVC_Handler
+        SECTION .text:CODE:REORDER:NOROOT(1)
+SVC_Handler
+        B SVC_Handler
+        
+        PUBWEAK DebugMon_Handler
+        SECTION .text:CODE:REORDER:NOROOT(1)
+DebugMon_Handler
+        B DebugMon_Handler
+        
+        PUBWEAK PendSV_Handler
+        SECTION .text:CODE:REORDER:NOROOT(1)
+PendSV_Handler
+        B PendSV_Handler
+        
+        PUBWEAK SysTick_Handler
+        SECTION .text:CODE:REORDER:NOROOT(1)
+SysTick_Handler
+        B SysTick_Handler
+        
+        PUBWEAK WWDG_IRQHandler
+        SECTION .text:CODE:REORDER:NOROOT(1)
+WWDG_IRQHandler
+        B WWDG_IRQHandler
+        
+        PUBWEAK PVD_IRQHandler
+        SECTION .text:CODE:REORDER:NOROOT(1)
+PVD_IRQHandler
+        B PVD_IRQHandler
+        
+        PUBWEAK TAMPER_IRQHandler
+        SECTION .text:CODE:REORDER:NOROOT(1)
+TAMPER_IRQHandler
+        B TAMPER_IRQHandler
+        
+        PUBWEAK RTC_IRQHandler
+        SECTION .text:CODE:REORDER:NOROOT(1)
+RTC_IRQHandler
+        B RTC_IRQHandler
+        
+        PUBWEAK FLASH_IRQHandler
+        SECTION .text:CODE:REORDER:NOROOT(1)
+FLASH_IRQHandler
+        B FLASH_IRQHandler
+        
+        PUBWEAK RCC_IRQHandler
+        SECTION .text:CODE:REORDER:NOROOT(1)
+RCC_IRQHandler
+        B RCC_IRQHandler
+        
+        PUBWEAK EXTI0_IRQHandler
+        SECTION .text:CODE:REORDER:NOROOT(1)
+EXTI0_IRQHandler
+        B EXTI0_IRQHandler
+        
+        PUBWEAK EXTI1_IRQHandler
+        SECTION .text:CODE:REORDER:NOROOT(1)
+EXTI1_IRQHandler
+        B EXTI1_IRQHandler
+        
+        PUBWEAK EXTI2_IRQHandler
+        SECTION .text:CODE:REORDER:NOROOT(1)
+EXTI2_IRQHandler
+        B EXTI2_IRQHandler
+        
+        PUBWEAK EXTI3_IRQHandler
+        SECTION .text:CODE:REORDER:NOROOT(1)
+EXTI3_IRQHandler
+        B EXTI3_IRQHandler
+        
+        PUBWEAK EXTI4_IRQHandler
+        SECTION .text:CODE:REORDER:NOROOT(1)
+EXTI4_IRQHandler
+        B EXTI4_IRQHandler
+        
+        PUBWEAK DMA1_Channel1_IRQHandler
+        SECTION .text:CODE:REORDER:NOROOT(1)
+DMA1_Channel1_IRQHandler
+        B DMA1_Channel1_IRQHandler
+        
+        PUBWEAK DMA1_Channel2_IRQHandler
+        SECTION .text:CODE:REORDER:NOROOT(1)
+DMA1_Channel2_IRQHandler
+        B DMA1_Channel2_IRQHandler
+        
+        PUBWEAK DMA1_Channel3_IRQHandler
+        SECTION .text:CODE:REORDER:NOROOT(1)
+DMA1_Channel3_IRQHandler
+        B DMA1_Channel3_IRQHandler
+        
+        PUBWEAK DMA1_Channel4_IRQHandler
+        SECTION .text:CODE:REORDER:NOROOT(1)
+DMA1_Channel4_IRQHandler
+        B DMA1_Channel4_IRQHandler
+        
+        PUBWEAK DMA1_Channel5_IRQHandler
+        SECTION .text:CODE:REORDER:NOROOT(1)
+DMA1_Channel5_IRQHandler
+        B DMA1_Channel5_IRQHandler
+        
+        PUBWEAK DMA1_Channel6_IRQHandler
+        SECTION .text:CODE:REORDER:NOROOT(1)
+DMA1_Channel6_IRQHandler
+        B DMA1_Channel6_IRQHandler
+        
+        PUBWEAK DMA1_Channel7_IRQHandler
+        SECTION .text:CODE:REORDER:NOROOT(1)
+DMA1_Channel7_IRQHandler
+        B DMA1_Channel7_IRQHandler
+        
+        PUBWEAK ADC1_IRQHandler
+        SECTION .text:CODE:REORDER:NOROOT(1)
+ADC1_IRQHandler
+        B ADC1_IRQHandler
+        
+        PUBWEAK EXTI9_5_IRQHandler
+        SECTION .text:CODE:REORDER:NOROOT(1)
+EXTI9_5_IRQHandler
+        B EXTI9_5_IRQHandler  
+        
+        PUBWEAK TIM2_IRQHandler
+        SECTION .text:CODE:REORDER:NOROOT(1)
+TIM2_IRQHandler
+        B TIM2_IRQHandler
+        
+        PUBWEAK TIM3_IRQHandler
+        SECTION .text:CODE:REORDER:NOROOT(1)
+TIM3_IRQHandler
+        B TIM3_IRQHandler
+        
+        PUBWEAK I2C1_EV_IRQHandler
+        SECTION .text:CODE:REORDER:NOROOT(1)
+I2C1_EV_IRQHandler
+        B I2C1_EV_IRQHandler
+        
+        PUBWEAK I2C1_ER_IRQHandler
+        SECTION .text:CODE:REORDER:NOROOT(1)
+I2C1_ER_IRQHandler
+        B I2C1_ER_IRQHandler
+        
+        PUBWEAK SPI1_IRQHandler
+        SECTION .text:CODE:REORDER:NOROOT(1)
+SPI1_IRQHandler
+        B SPI1_IRQHandler
+                      
+        PUBWEAK USART1_IRQHandler
+        SECTION .text:CODE:REORDER:NOROOT(1)
+USART1_IRQHandler
+        B USART1_IRQHandler
+
+        PUBWEAK USART2_IRQHandler
+        SECTION .text:CODE:REORDER:NOROOT(1)
+USART2_IRQHandler
+        B USART2_IRQHandler
+
+        PUBWEAK EXTI15_10_IRQHandler
+        SECTION .text:CODE:REORDER:NOROOT(1)
+EXTI15_10_IRQHandler
+        B EXTI15_10_IRQHandler
+
+        PUBWEAK RTC_Alarm_IRQHandler
+        SECTION .text:CODE:REORDER:NOROOT(1)
+RTC_Alarm_IRQHandler
+        B RTC_Alarm_IRQHandler
+
+        END
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

bsp/stm32f10x_HAL/Libraries/CMSIS/Device/ST/STM32F1xx/Source/Templates/iar/startup_stm32f101xb.s

@@ -0,0 +1,365 @@
+;******************** (C) COPYRIGHT 2017 STMicroelectronics ********************
+;* File Name          : startup_stm32f101xb.s
+;* Author             : MCD Application Team
+;* Version            : V4.2.0
+;* Date               : 31-March-2017
+;* Description        : STM32F101xB Access Line Devices vector table for 
+;*                      EWARM toolchain.
+;*                      This module performs:
+;*                      - Set the initial SP
+;*                      - Configure the clock system
+;*                      - Set the initial PC == __iar_program_start,
+;*                      - Set the vector table entries with the exceptions ISR 
+;*                        address.
+;*                      After Reset the Cortex-M3 processor is in Thread mode,
+;*                      priority is Privileged, and the Stack is set to Main.
+;********************************************************************************
+;* 
+;* <h2><center>&copy; COPYRIGHT(c) 2017 STMicroelectronics</center></h2>
+;* 
+;* Redistribution and use in source and binary forms, with or without modification,
+;* are permitted provided that the following conditions are met:
+;*   1. Redistributions of source code must retain the above copyright notice,
+;*      this list of conditions and the following disclaimer.
+;*   2. Redistributions in binary form must reproduce the above copyright notice,
+;*      this list of conditions and the following disclaimer in the documentation
+;*      and/or other materials provided with the distribution.
+;*   3. Neither the name of STMicroelectronics nor the names of its contributors
+;*      may be used to endorse or promote products derived from this software
+;*      without specific prior written permission.
+;* 
+;* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+;* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+;* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+;* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+;* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+;* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+;* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+;* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+;* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+;* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+;* 
+;*******************************************************************************
+;
+;
+; The modules in this file are included in the libraries, and may be replaced
+; by any user-defined modules that define the PUBLIC symbol _program_start or
+; a user defined start symbol.
+; To override the cstartup defined in the library, simply add your modified
+; version to the workbench project.
+;
+; The vector table is normally located at address 0.
+; When debugging in RAM, it can be located in RAM, aligned to at least 2^6.
+; The name "__vector_table" has special meaning for C-SPY:
+; it is where the SP start value is found, and the NVIC vector
+; table register (VTOR) is initialized to this address if != 0.
+;
+; Cortex-M version
+;
+
+        MODULE  ?cstartup
+
+        ;; Forward declaration of sections.
+        SECTION CSTACK:DATA:NOROOT(3)
+
+        SECTION .intvec:CODE:NOROOT(2)
+
+        EXTERN  __iar_program_start
+        EXTERN  SystemInit        
+        PUBLIC  __vector_table
+
+        DATA
+__vector_table
+        DCD     sfe(CSTACK)
+        DCD     Reset_Handler             ; Reset Handler
+        DCD     NMI_Handler               ; NMI Handler
+        DCD     HardFault_Handler         ; Hard Fault Handler
+        DCD     MemManage_Handler         ; MPU Fault Handler
+        DCD     BusFault_Handler          ; Bus Fault Handler
+        DCD     UsageFault_Handler        ; Usage Fault Handler
+        DCD     0                         ; Reserved
+        DCD     0                         ; Reserved
+        DCD     0                         ; Reserved
+        DCD     0                         ; Reserved
+        DCD     SVC_Handler               ; SVCall Handler
+        DCD     DebugMon_Handler          ; Debug Monitor Handler
+        DCD     0                         ; Reserved
+        DCD     PendSV_Handler            ; PendSV Handler
+        DCD     SysTick_Handler           ; SysTick Handler
+
+         ; External Interrupts
+        DCD     WWDG_IRQHandler           ; Window Watchdog
+        DCD     PVD_IRQHandler            ; PVD through EXTI Line detect
+        DCD     TAMPER_IRQHandler         ; Tamper
+        DCD     RTC_IRQHandler            ; RTC
+        DCD     FLASH_IRQHandler          ; Flash
+        DCD     RCC_IRQHandler            ; RCC
+        DCD     EXTI0_IRQHandler          ; EXTI Line 0
+        DCD     EXTI1_IRQHandler          ; EXTI Line 1
+        DCD     EXTI2_IRQHandler          ; EXTI Line 2
+        DCD     EXTI3_IRQHandler          ; EXTI Line 3
+        DCD     EXTI4_IRQHandler          ; EXTI Line 4
+        DCD     DMA1_Channel1_IRQHandler  ; DMA1 Channel 1
+        DCD     DMA1_Channel2_IRQHandler  ; DMA1 Channel 2
+        DCD     DMA1_Channel3_IRQHandler  ; DMA1 Channel 3
+        DCD     DMA1_Channel4_IRQHandler  ; DMA1 Channel 4
+        DCD     DMA1_Channel5_IRQHandler  ; DMA1 Channel 5
+        DCD     DMA1_Channel6_IRQHandler  ; DMA1 Channel 6
+        DCD     DMA1_Channel7_IRQHandler  ; DMA1 Channel 7
+        DCD     ADC1_IRQHandler         ; ADC1
+        DCD     0                         ; Reserved
+        DCD     0                         ; Reserved
+        DCD     0                         ; Reserved
+        DCD     0                         ; Reserved
+        DCD     EXTI9_5_IRQHandler        ; EXTI Line 9..5
+        DCD     0                         ; Reserved
+        DCD     0                         ; Reserved
+        DCD     0                         ; Reserved
+        DCD     0                         ; Reserved
+        DCD     TIM2_IRQHandler           ; TIM2
+        DCD     TIM3_IRQHandler           ; TIM3
+        DCD     TIM4_IRQHandler           ; TIM4
+        DCD     I2C1_EV_IRQHandler        ; I2C1 Event
+        DCD     I2C1_ER_IRQHandler        ; I2C1 Error
+        DCD     I2C2_EV_IRQHandler        ; I2C2 Event
+        DCD     I2C2_ER_IRQHandler        ; I2C2 Error
+        DCD     SPI1_IRQHandler           ; SPI1
+        DCD     SPI2_IRQHandler           ; SPI2
+        DCD     USART1_IRQHandler         ; USART1
+        DCD     USART2_IRQHandler         ; USART2
+        DCD     USART3_IRQHandler         ; USART3
+        DCD     EXTI15_10_IRQHandler      ; EXTI Line 15..10
+        DCD     RTC_Alarm_IRQHandler       ; RTC Alarm through EXTI Line
+        DCD     0                         ; Reserved
+
+;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
+;;
+;; Default interrupt handlers.
+;;
+        THUMB
+
+        PUBWEAK Reset_Handler
+        SECTION .text:CODE:REORDER:NOROOT(2)
+Reset_Handler
+        LDR     R0, =SystemInit
+        BLX     R0
+        LDR     R0, =__iar_program_start
+        BX      R0
+        
+        PUBWEAK NMI_Handler
+        SECTION .text:CODE:REORDER:NOROOT(1)
+NMI_Handler
+        B NMI_Handler
+
+        PUBWEAK HardFault_Handler
+        SECTION .text:CODE:REORDER:NOROOT(1)
+HardFault_Handler
+        B HardFault_Handler
+
+        PUBWEAK MemManage_Handler
+        SECTION .text:CODE:REORDER:NOROOT(1)
+MemManage_Handler
+        B MemManage_Handler
+
+        PUBWEAK BusFault_Handler
+        SECTION .text:CODE:REORDER:NOROOT(1)
+BusFault_Handler
+        B BusFault_Handler
+
+        PUBWEAK UsageFault_Handler
+        SECTION .text:CODE:REORDER:NOROOT(1)
+UsageFault_Handler
+        B UsageFault_Handler
+
+        PUBWEAK SVC_Handler
+        SECTION .text:CODE:REORDER:NOROOT(1)
+SVC_Handler
+        B SVC_Handler
+
+        PUBWEAK DebugMon_Handler
+        SECTION .text:CODE:REORDER:NOROOT(1)
+DebugMon_Handler
+        B DebugMon_Handler
+
+        PUBWEAK PendSV_Handler
+        SECTION .text:CODE:REORDER:NOROOT(1)
+PendSV_Handler
+        B PendSV_Handler
+
+        PUBWEAK SysTick_Handler
+        SECTION .text:CODE:REORDER:NOROOT(1)
+SysTick_Handler
+        B SysTick_Handler
+
+        PUBWEAK WWDG_IRQHandler
+        SECTION .text:CODE:REORDER:NOROOT(1)
+WWDG_IRQHandler
+        B WWDG_IRQHandler
+
+        PUBWEAK PVD_IRQHandler
+        SECTION .text:CODE:REORDER:NOROOT(1)
+PVD_IRQHandler
+        B PVD_IRQHandler
+
+        PUBWEAK TAMPER_IRQHandler
+        SECTION .text:CODE:REORDER:NOROOT(1)
+TAMPER_IRQHandler
+        B TAMPER_IRQHandler
+
+        PUBWEAK RTC_IRQHandler
+        SECTION .text:CODE:REORDER:NOROOT(1)
+RTC_IRQHandler
+        B RTC_IRQHandler
+
+        PUBWEAK FLASH_IRQHandler
+        SECTION .text:CODE:REORDER:NOROOT(1)
+FLASH_IRQHandler
+        B FLASH_IRQHandler
+
+        PUBWEAK RCC_IRQHandler
+        SECTION .text:CODE:REORDER:NOROOT(1)
+RCC_IRQHandler
+        B RCC_IRQHandler
+
+        PUBWEAK EXTI0_IRQHandler
+        SECTION .text:CODE:REORDER:NOROOT(1)
+EXTI0_IRQHandler
+        B EXTI0_IRQHandler
+
+        PUBWEAK EXTI1_IRQHandler
+        SECTION .text:CODE:REORDER:NOROOT(1)
+EXTI1_IRQHandler
+        B EXTI1_IRQHandler
+
+        PUBWEAK EXTI2_IRQHandler
+        SECTION .text:CODE:REORDER:NOROOT(1)
+EXTI2_IRQHandler
+        B EXTI2_IRQHandler
+
+        PUBWEAK EXTI3_IRQHandler
+        SECTION .text:CODE:REORDER:NOROOT(1)
+EXTI3_IRQHandler
+        B EXTI3_IRQHandler
+
+        PUBWEAK EXTI4_IRQHandler
+        SECTION .text:CODE:REORDER:NOROOT(1)
+EXTI4_IRQHandler
+        B EXTI4_IRQHandler
+
+        PUBWEAK DMA1_Channel1_IRQHandler
+        SECTION .text:CODE:REORDER:NOROOT(1)
+DMA1_Channel1_IRQHandler
+        B DMA1_Channel1_IRQHandler
+
+        PUBWEAK DMA1_Channel2_IRQHandler
+        SECTION .text:CODE:REORDER:NOROOT(1)
+DMA1_Channel2_IRQHandler
+        B DMA1_Channel2_IRQHandler
+
+        PUBWEAK DMA1_Channel3_IRQHandler
+        SECTION .text:CODE:REORDER:NOROOT(1)
+DMA1_Channel3_IRQHandler
+        B DMA1_Channel3_IRQHandler
+
+        PUBWEAK DMA1_Channel4_IRQHandler
+        SECTION .text:CODE:REORDER:NOROOT(1)
+DMA1_Channel4_IRQHandler
+        B DMA1_Channel4_IRQHandler
+
+        PUBWEAK DMA1_Channel5_IRQHandler
+        SECTION .text:CODE:REORDER:NOROOT(1)
+DMA1_Channel5_IRQHandler
+        B DMA1_Channel5_IRQHandler
+
+        PUBWEAK DMA1_Channel6_IRQHandler
+        SECTION .text:CODE:REORDER:NOROOT(1)
+DMA1_Channel6_IRQHandler
+        B DMA1_Channel6_IRQHandler
+
+        PUBWEAK DMA1_Channel7_IRQHandler
+        SECTION .text:CODE:REORDER:NOROOT(1)
+DMA1_Channel7_IRQHandler
+        B DMA1_Channel7_IRQHandler
+
+        PUBWEAK ADC1_IRQHandler
+        SECTION .text:CODE:REORDER:NOROOT(1)
+ADC1_IRQHandler
+        B ADC1_IRQHandler
+
+        PUBWEAK EXTI9_5_IRQHandler
+        SECTION .text:CODE:REORDER:NOROOT(1)
+EXTI9_5_IRQHandler
+        B EXTI9_5_IRQHandler
+
+        PUBWEAK TIM2_IRQHandler
+        SECTION .text:CODE:REORDER:NOROOT(1)
+TIM2_IRQHandler
+        B TIM2_IRQHandler
+
+        PUBWEAK TIM3_IRQHandler
+        SECTION .text:CODE:REORDER:NOROOT(1)
+TIM3_IRQHandler
+        B TIM3_IRQHandler
+
+        PUBWEAK TIM4_IRQHandler
+        SECTION .text:CODE:REORDER:NOROOT(1)
+TIM4_IRQHandler
+        B TIM4_IRQHandler
+
+        PUBWEAK I2C1_EV_IRQHandler
+        SECTION .text:CODE:REORDER:NOROOT(1)
+I2C1_EV_IRQHandler
+        B I2C1_EV_IRQHandler
+
+        PUBWEAK I2C1_ER_IRQHandler
+        SECTION .text:CODE:REORDER:NOROOT(1)
+I2C1_ER_IRQHandler
+        B I2C1_ER_IRQHandler
+
+        PUBWEAK I2C2_EV_IRQHandler
+        SECTION .text:CODE:REORDER:NOROOT(1)
+I2C2_EV_IRQHandler
+        B I2C2_EV_IRQHandler
+
+        PUBWEAK I2C2_ER_IRQHandler
+        SECTION .text:CODE:REORDER:NOROOT(1)
+I2C2_ER_IRQHandler
+        B I2C2_ER_IRQHandler
+
+        PUBWEAK SPI1_IRQHandler
+        SECTION .text:CODE:REORDER:NOROOT(1)
+SPI1_IRQHandler
+        B SPI1_IRQHandler
+
+        PUBWEAK SPI2_IRQHandler
+        SECTION .text:CODE:REORDER:NOROOT(1)
+SPI2_IRQHandler
+        B SPI2_IRQHandler
+
+        PUBWEAK USART1_IRQHandler
+        SECTION .text:CODE:REORDER:NOROOT(1)
+USART1_IRQHandler
+        B USART1_IRQHandler
+
+        PUBWEAK USART2_IRQHandler
+        SECTION .text:CODE:REORDER:NOROOT(1)
+USART2_IRQHandler
+        B USART2_IRQHandler
+
+        PUBWEAK USART3_IRQHandler
+        SECTION .text:CODE:REORDER:NOROOT(1)
+USART3_IRQHandler
+        B USART3_IRQHandler
+
+        PUBWEAK EXTI15_10_IRQHandler
+        SECTION .text:CODE:REORDER:NOROOT(1)
+EXTI15_10_IRQHandler
+        B EXTI15_10_IRQHandler
+
+        PUBWEAK RTC_Alarm_IRQHandler
+        SECTION .text:CODE:REORDER:NOROOT(1)
+RTC_Alarm_IRQHandler
+        B RTC_Alarm_IRQHandler
+
+        END
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

bsp/stm32f10x_HAL/Libraries/CMSIS/Device/ST/STM32F1xx/Source/Templates/iar/startup_stm32f101xe.s

@@ -0,0 +1,445 @@
+;******************** (C) COPYRIGHT 2017 STMicroelectronics ********************
+;* File Name          : startup_stm32f101xe.s
+;* Author             : MCD Application Team
+;* Version            : V4.2.0
+;* Date               : 31-March-2017
+;* Description        : STM32F101xE Access Line Devices vector table for EWARM toolchain.
+;*                      This module performs:
+;*                      - Set the initial SP
+;*                      - Set the initial PC == __iar_program_start,
+;*                      - Set the vector table entries with the exceptions ISR 
+;*                        address.
+;*                      - Configure the system clock
+;*                      - Branches to main in the C library (which eventually
+;*                        calls main()).
+;*                      After Reset the Cortex-M3 processor is in Thread mode,
+;*                      priority is Privileged, and the Stack is set to Main.
+;********************************************************************************
+;* 
+;* <h2><center>&copy; COPYRIGHT(c) 2017 STMicroelectronics</center></h2>
+;* 
+;* Redistribution and use in source and binary forms, with or without modification,
+;* are permitted provided that the following conditions are met:
+;*   1. Redistributions of source code must retain the above copyright notice,
+;*      this list of conditions and the following disclaimer.
+;*   2. Redistributions in binary form must reproduce the above copyright notice,
+;*      this list of conditions and the following disclaimer in the documentation
+;*      and/or other materials provided with the distribution.
+;*   3. Neither the name of STMicroelectronics nor the names of its contributors
+;*      may be used to endorse or promote products derived from this software
+;*      without specific prior written permission.
+;* 
+;* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+;* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+;* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+;* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+;* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+;* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+;* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+;* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+;* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+;* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+;* 
+;*******************************************************************************
+;
+;
+; The modules in this file are included in the libraries, and may be replaced
+; by any user-defined modules that define the PUBLIC symbol _program_start or
+; a user defined start symbol.
+; To override the cstartup defined in the library, simply add your modified
+; version to the workbench project.
+;
+; The vector table is normally located at address 0.
+; When debugging in RAM, it can be located in RAM, aligned to at least 2^6.
+; The name "__vector_table" has special meaning for C-SPY:
+; it is where the SP start value is found, and the NVIC vector
+; table register (VTOR) is initialized to this address if != 0.
+;
+; Cortex-M version
+;     
+  
+    MODULE  ?cstartup
+        
+        ;; Forward declaration of sections.
+        SECTION CSTACK:DATA:NOROOT(3)
+
+        SECTION .intvec:CODE:NOROOT(2)
+
+        EXTERN  __iar_program_start
+        EXTERN  SystemInit        
+        PUBLIC  __vector_table
+
+        DATA
+       
+__vector_table
+        DCD     sfe(CSTACK)
+        DCD     Reset_Handler             ; Reset Handler
+        DCD     NMI_Handler               ; NMI Handler
+        DCD     HardFault_Handler         ; Hard Fault Handler
+        DCD     MemManage_Handler         ; MPU Fault Handler
+        DCD     BusFault_Handler          ; Bus Fault Handler
+        DCD     UsageFault_Handler        ; Usage Fault Handler
+        DCD     0                         ; Reserved
+        DCD     0                         ; Reserved
+        DCD     0                         ; Reserved
+        DCD     0                         ; Reserved
+        DCD     SVC_Handler               ; SVCall Handler
+        DCD     DebugMon_Handler          ; Debug Monitor Handler
+        DCD     0                         ; Reserved
+        DCD     PendSV_Handler            ; PendSV Handler
+        DCD     SysTick_Handler           ; SysTick Handler
+
+         ; External Interrupts
+        DCD     WWDG_IRQHandler           ; Window Watchdog
+        DCD     PVD_IRQHandler            ; PVD through EXTI Line detect
+        DCD     TAMPER_IRQHandler         ; Tamper
+        DCD     RTC_IRQHandler            ; RTC
+        DCD     FLASH_IRQHandler          ; Flash
+        DCD     RCC_IRQHandler            ; RCC
+        DCD     EXTI0_IRQHandler          ; EXTI Line 0
+        DCD     EXTI1_IRQHandler          ; EXTI Line 1
+        DCD     EXTI2_IRQHandler          ; EXTI Line 2
+        DCD     EXTI3_IRQHandler          ; EXTI Line 3
+        DCD     EXTI4_IRQHandler          ; EXTI Line 4
+        DCD     DMA1_Channel1_IRQHandler  ; DMA1 Channel 1
+        DCD     DMA1_Channel2_IRQHandler  ; DMA1 Channel 2
+        DCD     DMA1_Channel3_IRQHandler  ; DMA1 Channel 3
+        DCD     DMA1_Channel4_IRQHandler  ; DMA1 Channel 4
+        DCD     DMA1_Channel5_IRQHandler  ; DMA1 Channel 5
+        DCD     DMA1_Channel6_IRQHandler  ; DMA1 Channel 6
+        DCD     DMA1_Channel7_IRQHandler  ; DMA1 Channel 7
+        DCD     ADC1_IRQHandler         ; ADC1
+        DCD     0                         ; Reserved
+        DCD     0                         ; Reserved
+        DCD     0                         ; Reserved
+        DCD     0                         ; Reserved
+        DCD     EXTI9_5_IRQHandler        ; EXTI Line 9..5
+        DCD     0                         ; Reserved
+        DCD     0                         ; Reserved
+        DCD     0                         ; Reserved
+        DCD     0                         ; Reserved
+        DCD     TIM2_IRQHandler           ; TIM2
+        DCD     TIM3_IRQHandler           ; TIM3
+        DCD     TIM4_IRQHandler           ; TIM4
+        DCD     I2C1_EV_IRQHandler        ; I2C1 Event
+        DCD     I2C1_ER_IRQHandler        ; I2C1 Error
+        DCD     I2C2_EV_IRQHandler        ; I2C2 Event
+        DCD     I2C2_ER_IRQHandler        ; I2C2 Error
+        DCD     SPI1_IRQHandler           ; SPI1
+        DCD     SPI2_IRQHandler           ; SPI2
+        DCD     USART1_IRQHandler         ; USART1
+        DCD     USART2_IRQHandler         ; USART2
+        DCD     USART3_IRQHandler         ; USART3
+        DCD     EXTI15_10_IRQHandler      ; EXTI Line 15..10
+        DCD     RTC_Alarm_IRQHandler       ; RTC Alarm through EXTI Line
+        DCD     0                         ; Reserved
+        DCD     0                         ; Reserved
+        DCD     0                         ; Reserved
+        DCD     0                         ; Reserved
+        DCD     0                         ; Reserved
+        DCD     0                         ; Reserved
+        DCD     FSMC_IRQHandler           ; FSMC
+        DCD     0                         ; Reserved
+        DCD     TIM5_IRQHandler           ; TIM5
+        DCD     SPI3_IRQHandler           ; SPI3
+        DCD     UART4_IRQHandler          ; UART4
+        DCD     UART5_IRQHandler          ; UART5
+        DCD     TIM6_IRQHandler           ; TIM6
+        DCD     TIM7_IRQHandler           ; TIM7
+        DCD     DMA2_Channel1_IRQHandler  ; DMA2 Channel1
+        DCD     DMA2_Channel2_IRQHandler  ; DMA2 Channel2
+        DCD     DMA2_Channel3_IRQHandler  ; DMA2 Channel3
+        DCD     DMA2_Channel4_5_IRQHandler ; DMA2 Channel4 & Channel5
+;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
+;;
+;; Default interrupt handlers.
+;;
+        THUMB
+
+        PUBWEAK Reset_Handler
+        SECTION .text:CODE:REORDER:NOROOT(2)
+Reset_Handler
+        LDR     R0, =SystemInit
+        BLX     R0
+        LDR     R0, =__iar_program_start
+        BX      R0
+               
+        PUBWEAK NMI_Handler
+        SECTION .text:CODE:REORDER:NOROOT(1)
+NMI_Handler
+        B NMI_Handler
+
+        PUBWEAK HardFault_Handler
+        SECTION .text:CODE:REORDER:NOROOT(1)
+HardFault_Handler
+        B HardFault_Handler
+
+        PUBWEAK MemManage_Handler
+        SECTION .text:CODE:REORDER:NOROOT(1)
+MemManage_Handler
+        B MemManage_Handler
+
+        PUBWEAK BusFault_Handler
+        SECTION .text:CODE:REORDER:NOROOT(1)
+BusFault_Handler
+        B BusFault_Handler
+
+        PUBWEAK UsageFault_Handler
+        SECTION .text:CODE:REORDER:NOROOT(1)
+UsageFault_Handler
+        B UsageFault_Handler
+
+        PUBWEAK SVC_Handler
+        SECTION .text:CODE:REORDER:NOROOT(1)
+SVC_Handler
+        B SVC_Handler
+
+        PUBWEAK DebugMon_Handler
+        SECTION .text:CODE:REORDER:NOROOT(1)
+DebugMon_Handler
+        B DebugMon_Handler
+
+        PUBWEAK PendSV_Handler
+        SECTION .text:CODE:REORDER:NOROOT(1)
+PendSV_Handler
+        B PendSV_Handler
+
+        PUBWEAK SysTick_Handler
+        SECTION .text:CODE:REORDER:NOROOT(1)
+SysTick_Handler
+        B SysTick_Handler
+
+        PUBWEAK WWDG_IRQHandler
+        SECTION .text:CODE:REORDER:NOROOT(1)
+WWDG_IRQHandler
+        B WWDG_IRQHandler
+
+        PUBWEAK PVD_IRQHandler
+        SECTION .text:CODE:REORDER:NOROOT(1)
+PVD_IRQHandler
+        B PVD_IRQHandler
+
+        PUBWEAK TAMPER_IRQHandler
+        SECTION .text:CODE:REORDER:NOROOT(1)
+TAMPER_IRQHandler
+        B TAMPER_IRQHandler
+
+        PUBWEAK RTC_IRQHandler
+        SECTION .text:CODE:REORDER:NOROOT(1)
+RTC_IRQHandler
+        B RTC_IRQHandler
+
+        PUBWEAK FLASH_IRQHandler
+        SECTION .text:CODE:REORDER:NOROOT(1)
+FLASH_IRQHandler
+        B FLASH_IRQHandler
+
+        PUBWEAK RCC_IRQHandler
+        SECTION .text:CODE:REORDER:NOROOT(1)
+RCC_IRQHandler
+        B RCC_IRQHandler
+
+        PUBWEAK EXTI0_IRQHandler
+        SECTION .text:CODE:REORDER:NOROOT(1)
+EXTI0_IRQHandler
+        B EXTI0_IRQHandler
+
+        PUBWEAK EXTI1_IRQHandler
+        SECTION .text:CODE:REORDER:NOROOT(1)
+EXTI1_IRQHandler
+        B EXTI1_IRQHandler
+
+        PUBWEAK EXTI2_IRQHandler
+        SECTION .text:CODE:REORDER:NOROOT(1)
+EXTI2_IRQHandler
+        B EXTI2_IRQHandler
+
+        PUBWEAK EXTI3_IRQHandler
+        SECTION .text:CODE:REORDER:NOROOT(1)
+EXTI3_IRQHandler
+        B EXTI3_IRQHandler
+
+        PUBWEAK EXTI4_IRQHandler
+        SECTION .text:CODE:REORDER:NOROOT(1)
+EXTI4_IRQHandler
+        B EXTI4_IRQHandler
+
+        PUBWEAK DMA1_Channel1_IRQHandler
+        SECTION .text:CODE:REORDER:NOROOT(1)
+DMA1_Channel1_IRQHandler
+        B DMA1_Channel1_IRQHandler
+
+        PUBWEAK DMA1_Channel2_IRQHandler
+        SECTION .text:CODE:REORDER:NOROOT(1)
+DMA1_Channel2_IRQHandler
+        B DMA1_Channel2_IRQHandler
+
+        PUBWEAK DMA1_Channel3_IRQHandler
+        SECTION .text:CODE:REORDER:NOROOT(1)
+DMA1_Channel3_IRQHandler
+        B DMA1_Channel3_IRQHandler
+
+        PUBWEAK DMA1_Channel4_IRQHandler
+        SECTION .text:CODE:REORDER:NOROOT(1)
+DMA1_Channel4_IRQHandler
+        B DMA1_Channel4_IRQHandler
+
+        PUBWEAK DMA1_Channel5_IRQHandler
+        SECTION .text:CODE:REORDER:NOROOT(1)
+DMA1_Channel5_IRQHandler
+        B DMA1_Channel5_IRQHandler
+
+        PUBWEAK DMA1_Channel6_IRQHandler
+        SECTION .text:CODE:REORDER:NOROOT(1)
+DMA1_Channel6_IRQHandler
+        B DMA1_Channel6_IRQHandler
+
+        PUBWEAK DMA1_Channel7_IRQHandler
+        SECTION .text:CODE:REORDER:NOROOT(1)
+DMA1_Channel7_IRQHandler
+        B DMA1_Channel7_IRQHandler
+
+        PUBWEAK ADC1_IRQHandler
+        SECTION .text:CODE:REORDER:NOROOT(1)
+ADC1_IRQHandler
+        B ADC1_IRQHandler
+ 
+        PUBWEAK EXTI9_5_IRQHandler
+        SECTION .text:CODE:REORDER:NOROOT(1)
+EXTI9_5_IRQHandler
+        B EXTI9_5_IRQHandler
+
+        PUBWEAK TIM2_IRQHandler
+        SECTION .text:CODE:REORDER:NOROOT(1)
+TIM2_IRQHandler
+        B TIM2_IRQHandler
+
+        PUBWEAK TIM3_IRQHandler
+        SECTION .text:CODE:REORDER:NOROOT(1)
+TIM3_IRQHandler
+        B TIM3_IRQHandler
+
+        PUBWEAK TIM4_IRQHandler
+        SECTION .text:CODE:REORDER:NOROOT(1)
+TIM4_IRQHandler
+        B TIM4_IRQHandler
+
+        PUBWEAK I2C1_EV_IRQHandler
+        SECTION .text:CODE:REORDER:NOROOT(1)
+I2C1_EV_IRQHandler
+        B I2C1_EV_IRQHandler
+
+        PUBWEAK I2C1_ER_IRQHandler
+        SECTION .text:CODE:REORDER:NOROOT(1)
+I2C1_ER_IRQHandler
+        B I2C1_ER_IRQHandler
+
+        PUBWEAK I2C2_EV_IRQHandler
+        SECTION .text:CODE:REORDER:NOROOT(1)
+I2C2_EV_IRQHandler
+        B I2C2_EV_IRQHandler
+
+        PUBWEAK I2C2_ER_IRQHandler
+        SECTION .text:CODE:REORDER:NOROOT(1)
+I2C2_ER_IRQHandler
+        B I2C2_ER_IRQHandler
+
+        PUBWEAK SPI1_IRQHandler
+        SECTION .text:CODE:REORDER:NOROOT(1)
+SPI1_IRQHandler
+        B SPI1_IRQHandler
+
+        PUBWEAK SPI2_IRQHandler
+        SECTION .text:CODE:REORDER:NOROOT(1)
+SPI2_IRQHandler
+        B SPI2_IRQHandler
+
+        PUBWEAK USART1_IRQHandler
+        SECTION .text:CODE:REORDER:NOROOT(1)
+USART1_IRQHandler
+        B USART1_IRQHandler
+
+        PUBWEAK USART2_IRQHandler
+        SECTION .text:CODE:REORDER:NOROOT(1)
+USART2_IRQHandler
+        B USART2_IRQHandler
+
+        PUBWEAK USART3_IRQHandler
+        SECTION .text:CODE:REORDER:NOROOT(1)
+USART3_IRQHandler
+        B USART3_IRQHandler
+
+        PUBWEAK EXTI15_10_IRQHandler
+        SECTION .text:CODE:REORDER:NOROOT(1)
+EXTI15_10_IRQHandler
+        B EXTI15_10_IRQHandler
+
+        PUBWEAK RTC_Alarm_IRQHandler
+        SECTION .text:CODE:REORDER:NOROOT(1)
+RTC_Alarm_IRQHandler
+        B RTC_Alarm_IRQHandler
+
+        PUBWEAK FSMC_IRQHandler
+        SECTION .text:CODE:REORDER:NOROOT(1)
+FSMC_IRQHandler
+        B FSMC_IRQHandler
+
+        PUBWEAK SDIO_IRQHandler
+        SECTION .text:CODE:REORDER:NOROOT(1)
+SDIO_IRQHandler
+        B SDIO_IRQHandler
+
+        PUBWEAK TIM5_IRQHandler
+        SECTION .text:CODE:REORDER:NOROOT(1)
+TIM5_IRQHandler
+        B TIM5_IRQHandler
+
+        PUBWEAK SPI3_IRQHandler
+        SECTION .text:CODE:REORDER:NOROOT(1)
+SPI3_IRQHandler
+        B SPI3_IRQHandler
+
+        PUBWEAK UART4_IRQHandler
+        SECTION .text:CODE:REORDER:NOROOT(1)
+UART4_IRQHandler
+        B UART4_IRQHandler
+
+        PUBWEAK UART5_IRQHandler
+        SECTION .text:CODE:REORDER:NOROOT(1)
+UART5_IRQHandler
+        B UART5_IRQHandler
+
+        PUBWEAK TIM6_IRQHandler
+        SECTION .text:CODE:REORDER:NOROOT(1)
+TIM6_IRQHandler
+        B TIM6_IRQHandler
+
+        PUBWEAK TIM7_IRQHandler
+        SECTION .text:CODE:REORDER:NOROOT(1)
+TIM7_IRQHandler
+        B TIM7_IRQHandler
+
+        PUBWEAK DMA2_Channel1_IRQHandler
+        SECTION .text:CODE:REORDER:NOROOT(1)
+DMA2_Channel1_IRQHandler
+        B DMA2_Channel1_IRQHandler
+
+        PUBWEAK DMA2_Channel2_IRQHandler
+        SECTION .text:CODE:REORDER:NOROOT(1)
+DMA2_Channel2_IRQHandler
+        B DMA2_Channel2_IRQHandler
+
+        PUBWEAK DMA2_Channel3_IRQHandler
+        SECTION .text:CODE:REORDER:NOROOT(1)
+DMA2_Channel3_IRQHandler
+        B DMA2_Channel3_IRQHandler
+
+        PUBWEAK DMA2_Channel4_5_IRQHandler
+        SECTION .text:CODE:REORDER:NOROOT(1)
+DMA2_Channel4_5_IRQHandler
+        B DMA2_Channel4_5_IRQHandler
+        
+        
+        END
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

bsp/stm32f10x_HAL/Libraries/CMSIS/Device/ST/STM32F1xx/Source/Templates/iar/startup_stm32f101xg.s

@@ -0,0 +1,476 @@
+;******************** (C) COPYRIGHT 2017 STMicroelectronics ********************
+;* File Name          : startup_stm32f101xg.s
+;* Author             : MCD Application Team
+;* Version            : V4.2.0
+;* Date               : 31-March-2017
+;* Description        : STM32F101xG Access Line Devices vector table for EWARM 
+;*                      toolchain.
+;*                      This module performs:
+;*                      - Set the initial SP
+;*                      - Set the initial PC == __iar_program_start,
+;*                      - Set the vector table entries with the exceptions ISR 
+;*                        address.
+;*                      - Configure the system clock
+;*                      - Branches to main in the C library (which eventually
+;*                        calls main()).
+;*                      After Reset the Cortex-M3 processor is in Thread mode,
+;*                      priority is Privileged, and the Stack is set to Main.
+;********************************************************************************
+;* 
+;* <h2><center>&copy; COPYRIGHT(c) 2017 STMicroelectronics</center></h2>
+;* 
+;* Redistribution and use in source and binary forms, with or without modification,
+;* are permitted provided that the following conditions are met:
+;*   1. Redistributions of source code must retain the above copyright notice,
+;*      this list of conditions and the following disclaimer.
+;*   2. Redistributions in binary form must reproduce the above copyright notice,
+;*      this list of conditions and the following disclaimer in the documentation
+;*      and/or other materials provided with the distribution.
+;*   3. Neither the name of STMicroelectronics nor the names of its contributors
+;*      may be used to endorse or promote products derived from this software
+;*      without specific prior written permission.
+;* 
+;* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+;* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+;* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+;* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+;* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+;* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+;* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+;* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+;* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+;* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+;* 
+;*******************************************************************************
+;
+;
+; The modules in this file are included in the libraries, and may be replaced
+; by any user-defined modules that define the PUBLIC symbol _program_start or
+; a user defined start symbol.
+; To override the cstartup defined in the library, simply add your modified
+; version to the workbench project.
+;
+; The vector table is normally located at address 0.
+; When debugging in RAM, it can be located in RAM, aligned to at least 2^6.
+; The name "__vector_table" has special meaning for C-SPY:
+; it is where the SP start value is found, and the NVIC vector
+; table register (VTOR) is initialized to this address if != 0.
+;
+; Cortex-M version
+;     
+  
+    MODULE  ?cstartup
+        
+        ;; Forward declaration of sections.
+        SECTION CSTACK:DATA:NOROOT(3)
+
+        SECTION .intvec:CODE:NOROOT(2)
+
+        EXTERN  __iar_program_start
+        EXTERN  SystemInit        
+        PUBLIC  __vector_table
+
+        DATA
+       
+__vector_table
+        DCD     sfe(CSTACK)
+        DCD     Reset_Handler             ; Reset Handler
+        DCD     NMI_Handler               ; NMI Handler
+        DCD     HardFault_Handler         ; Hard Fault Handler
+        DCD     MemManage_Handler         ; MPU Fault Handler
+        DCD     BusFault_Handler          ; Bus Fault Handler
+        DCD     UsageFault_Handler        ; Usage Fault Handler
+        DCD     0                         ; Reserved
+        DCD     0                         ; Reserved
+        DCD     0                         ; Reserved
+        DCD     0                         ; Reserved
+        DCD     SVC_Handler               ; SVCall Handler
+        DCD     DebugMon_Handler          ; Debug Monitor Handler
+        DCD     0                         ; Reserved
+        DCD     PendSV_Handler            ; PendSV Handler
+        DCD     SysTick_Handler           ; SysTick Handler
+
+         ; External Interrupts
+        DCD     WWDG_IRQHandler               ; Window Watchdog
+        DCD     PVD_IRQHandler                ; PVD through EXTI Line detect
+        DCD     TAMPER_IRQHandler             ; Tamper
+        DCD     RTC_IRQHandler                ; RTC
+        DCD     FLASH_IRQHandler              ; Flash
+        DCD     RCC_IRQHandler                ; RCC
+        DCD     EXTI0_IRQHandler              ; EXTI Line 0
+        DCD     EXTI1_IRQHandler              ; EXTI Line 1
+        DCD     EXTI2_IRQHandler              ; EXTI Line 2
+        DCD     EXTI3_IRQHandler              ; EXTI Line 3
+        DCD     EXTI4_IRQHandler              ; EXTI Line 4
+        DCD     DMA1_Channel1_IRQHandler      ; DMA1 Channel 1
+        DCD     DMA1_Channel2_IRQHandler      ; DMA1 Channel 2
+        DCD     DMA1_Channel3_IRQHandler      ; DMA1 Channel 3
+        DCD     DMA1_Channel4_IRQHandler      ; DMA1 Channel 4
+        DCD     DMA1_Channel5_IRQHandler      ; DMA1 Channel 5
+        DCD     DMA1_Channel6_IRQHandler      ; DMA1 Channel 6
+        DCD     DMA1_Channel7_IRQHandler      ; DMA1 Channel 7
+        DCD     ADC1_2_IRQHandler             ; ADC1 & ADC2
+        DCD     0                         ; Reserved
+        DCD     0                         ; Reserved
+        DCD     0                         ; Reserved
+        DCD     0                         ; Reserved
+        DCD     EXTI9_5_IRQHandler            ; EXTI Line 9..5
+        DCD     TIM9_IRQHandler               ; TIM9
+        DCD     TIM10_IRQHandler              ; TIM10
+        DCD     TIM11_IRQHandler              ; TIM11
+        DCD     0                         ; Reserved
+        DCD     TIM2_IRQHandler               ; TIM2
+        DCD     TIM3_IRQHandler               ; TIM3
+        DCD     TIM4_IRQHandler               ; TIM4
+        DCD     I2C1_EV_IRQHandler            ; I2C1 Event
+        DCD     I2C1_ER_IRQHandler            ; I2C1 Error
+        DCD     I2C2_EV_IRQHandler            ; I2C2 Event
+        DCD     I2C2_ER_IRQHandler            ; I2C2 Error
+        DCD     SPI1_IRQHandler               ; SPI1
+        DCD     SPI2_IRQHandler               ; SPI2
+        DCD     USART1_IRQHandler             ; USART1
+        DCD     USART2_IRQHandler             ; USART2
+        DCD     USART3_IRQHandler             ; USART3
+        DCD     EXTI15_10_IRQHandler          ; EXTI Line 15..10
+        DCD     RTC_Alarm_IRQHandler           ; RTC Alarm through EXTI Line
+        DCD     0                         ; Reserved
+        DCD     TIM12_IRQHandler              ; TIM12
+        DCD     TIM13_IRQHandler              ; TIM13
+        DCD     TIM14_IRQHandler              ; TIM14
+        DCD     0                         ; Reserved
+        DCD     0                         ; Reserved
+        DCD     FSMC_IRQHandler               ; FSMC
+        DCD     0                         ; Reserved
+        DCD     TIM5_IRQHandler               ; TIM5
+        DCD     SPI3_IRQHandler               ; SPI3
+        DCD     UART4_IRQHandler              ; UART4
+        DCD     UART5_IRQHandler              ; UART5
+        DCD     TIM6_IRQHandler               ; TIM6
+        DCD     TIM7_IRQHandler               ; TIM7
+        DCD     DMA2_Channel1_IRQHandler      ; DMA2 Channel1
+        DCD     DMA2_Channel2_IRQHandler      ; DMA2 Channel2
+        DCD     DMA2_Channel3_IRQHandler      ; DMA2 Channel3
+        DCD     DMA2_Channel4_5_IRQHandler    ; DMA2 Channel4 & Channel5
+;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
+;;
+;; Default interrupt handlers.
+;;
+        THUMB
+
+        PUBWEAK Reset_Handler
+        SECTION .text:CODE:REORDER:NOROOT(2)
+Reset_Handler
+        LDR     R0, =SystemInit
+        BLX     R0
+        LDR     R0, =__iar_program_start
+        BX      R0
+               
+        PUBWEAK NMI_Handler
+        SECTION .text:CODE:REORDER:NOROOT(1)
+NMI_Handler
+        B NMI_Handler
+
+        PUBWEAK HardFault_Handler
+        SECTION .text:CODE:REORDER:NOROOT(1)
+HardFault_Handler
+        B HardFault_Handler
+
+        PUBWEAK MemManage_Handler
+        SECTION .text:CODE:REORDER:NOROOT(1)
+MemManage_Handler
+        B MemManage_Handler
+
+        PUBWEAK BusFault_Handler
+        SECTION .text:CODE:REORDER:NOROOT(1)
+BusFault_Handler
+        B BusFault_Handler
+
+        PUBWEAK UsageFault_Handler
+        SECTION .text:CODE:REORDER:NOROOT(1)
+UsageFault_Handler
+        B UsageFault_Handler
+
+        PUBWEAK SVC_Handler
+        SECTION .text:CODE:REORDER:NOROOT(1)
+SVC_Handler
+        B SVC_Handler
+
+        PUBWEAK DebugMon_Handler
+        SECTION .text:CODE:REORDER:NOROOT(1)
+DebugMon_Handler
+        B DebugMon_Handler
+
+        PUBWEAK PendSV_Handler
+        SECTION .text:CODE:REORDER:NOROOT(1)
+PendSV_Handler
+        B PendSV_Handler
+
+        PUBWEAK SysTick_Handler
+        SECTION .text:CODE:REORDER:NOROOT(1)
+SysTick_Handler
+        B SysTick_Handler
+
+        PUBWEAK WWDG_IRQHandler
+        SECTION .text:CODE:REORDER:NOROOT(1)
+WWDG_IRQHandler
+        B WWDG_IRQHandler
+
+        PUBWEAK PVD_IRQHandler
+        SECTION .text:CODE:REORDER:NOROOT(1)
+PVD_IRQHandler
+        B PVD_IRQHandler
+
+        PUBWEAK TAMPER_IRQHandler
+        SECTION .text:CODE:REORDER:NOROOT(1)
+TAMPER_IRQHandler
+        B TAMPER_IRQHandler
+
+        PUBWEAK RTC_IRQHandler
+        SECTION .text:CODE:REORDER:NOROOT(1)
+RTC_IRQHandler
+        B RTC_IRQHandler
+
+        PUBWEAK FLASH_IRQHandler
+        SECTION .text:CODE:REORDER:NOROOT(1)
+FLASH_IRQHandler
+        B FLASH_IRQHandler
+
+        PUBWEAK RCC_IRQHandler
+        SECTION .text:CODE:REORDER:NOROOT(1)
+RCC_IRQHandler
+        B RCC_IRQHandler
+
+        PUBWEAK EXTI0_IRQHandler
+        SECTION .text:CODE:REORDER:NOROOT(1)
+EXTI0_IRQHandler
+        B EXTI0_IRQHandler
+
+        PUBWEAK EXTI1_IRQHandler
+        SECTION .text:CODE:REORDER:NOROOT(1)
+EXTI1_IRQHandler
+        B EXTI1_IRQHandler
+
+        PUBWEAK EXTI2_IRQHandler
+        SECTION .text:CODE:REORDER:NOROOT(1)
+EXTI2_IRQHandler
+        B EXTI2_IRQHandler
+
+        PUBWEAK EXTI3_IRQHandler
+        SECTION .text:CODE:REORDER:NOROOT(1)
+EXTI3_IRQHandler
+        B EXTI3_IRQHandler
+
+        PUBWEAK EXTI4_IRQHandler
+        SECTION .text:CODE:REORDER:NOROOT(1)
+EXTI4_IRQHandler
+        B EXTI4_IRQHandler
+
+        PUBWEAK DMA1_Channel1_IRQHandler
+        SECTION .text:CODE:REORDER:NOROOT(1)
+DMA1_Channel1_IRQHandler
+        B DMA1_Channel1_IRQHandler
+
+        PUBWEAK DMA1_Channel2_IRQHandler
+        SECTION .text:CODE:REORDER:NOROOT(1)
+DMA1_Channel2_IRQHandler
+        B DMA1_Channel2_IRQHandler
+
+        PUBWEAK DMA1_Channel3_IRQHandler
+        SECTION .text:CODE:REORDER:NOROOT(1)
+DMA1_Channel3_IRQHandler
+        B DMA1_Channel3_IRQHandler
+
+        PUBWEAK DMA1_Channel4_IRQHandler
+        SECTION .text:CODE:REORDER:NOROOT(1)
+DMA1_Channel4_IRQHandler
+        B DMA1_Channel4_IRQHandler
+
+        PUBWEAK DMA1_Channel5_IRQHandler
+        SECTION .text:CODE:REORDER:NOROOT(1)
+DMA1_Channel5_IRQHandler
+        B DMA1_Channel5_IRQHandler
+
+        PUBWEAK DMA1_Channel6_IRQHandler
+        SECTION .text:CODE:REORDER:NOROOT(1)
+DMA1_Channel6_IRQHandler
+        B DMA1_Channel6_IRQHandler
+
+        PUBWEAK DMA1_Channel7_IRQHandler
+        SECTION .text:CODE:REORDER:NOROOT(1)
+DMA1_Channel7_IRQHandler
+        B DMA1_Channel7_IRQHandler
+
+        PUBWEAK ADC1_2_IRQHandler
+        SECTION .text:CODE:REORDER:NOROOT(1)
+ADC1_2_IRQHandler
+        B ADC1_2_IRQHandler
+
+         PUBWEAK EXTI9_5_IRQHandler
+        SECTION .text:CODE:REORDER:NOROOT(1)
+EXTI9_5_IRQHandler
+        B EXTI9_5_IRQHandler
+
+        PUBWEAK TIM9_IRQHandler
+        SECTION .text:CODE:REORDER:NOROOT(1)
+TIM9_IRQHandler
+        B TIM9_IRQHandler
+
+        PUBWEAK TIM10_IRQHandler
+        SECTION .text:CODE:REORDER:NOROOT(1)
+TIM10_IRQHandler
+        B TIM10_IRQHandler
+
+        PUBWEAK TIM11_IRQHandler
+        SECTION .text:CODE:REORDER:NOROOT(1)
+TIM11_IRQHandler
+        B TIM11_IRQHandler
+
+        PUBWEAK TIM1_CC_IRQHandler
+        SECTION .text:CODE:REORDER:NOROOT(1)
+TIM1_CC_IRQHandler
+        B TIM1_CC_IRQHandler
+
+        PUBWEAK TIM2_IRQHandler
+        SECTION .text:CODE:REORDER:NOROOT(1)
+TIM2_IRQHandler
+        B TIM2_IRQHandler
+
+        PUBWEAK TIM3_IRQHandler
+        SECTION .text:CODE:REORDER:NOROOT(1)
+TIM3_IRQHandler
+        B TIM3_IRQHandler
+
+        PUBWEAK TIM4_IRQHandler
+        SECTION .text:CODE:REORDER:NOROOT(1)
+TIM4_IRQHandler
+        B TIM4_IRQHandler
+
+        PUBWEAK I2C1_EV_IRQHandler
+        SECTION .text:CODE:REORDER:NOROOT(1)
+I2C1_EV_IRQHandler
+        B I2C1_EV_IRQHandler
+
+        PUBWEAK I2C1_ER_IRQHandler
+        SECTION .text:CODE:REORDER:NOROOT(1)
+I2C1_ER_IRQHandler
+        B I2C1_ER_IRQHandler
+
+        PUBWEAK I2C2_EV_IRQHandler
+        SECTION .text:CODE:REORDER:NOROOT(1)
+I2C2_EV_IRQHandler
+        B I2C2_EV_IRQHandler
+
+        PUBWEAK I2C2_ER_IRQHandler
+        SECTION .text:CODE:REORDER:NOROOT(1)
+I2C2_ER_IRQHandler
+        B I2C2_ER_IRQHandler
+
+        PUBWEAK SPI1_IRQHandler
+        SECTION .text:CODE:REORDER:NOROOT(1)
+SPI1_IRQHandler
+        B SPI1_IRQHandler
+
+        PUBWEAK SPI2_IRQHandler
+        SECTION .text:CODE:REORDER:NOROOT(1)
+SPI2_IRQHandler
+        B SPI2_IRQHandler
+
+        PUBWEAK USART1_IRQHandler
+        SECTION .text:CODE:REORDER:NOROOT(1)
+USART1_IRQHandler
+        B USART1_IRQHandler
+
+        PUBWEAK USART2_IRQHandler
+        SECTION .text:CODE:REORDER:NOROOT(1)
+USART2_IRQHandler
+        B USART2_IRQHandler
+
+        PUBWEAK USART3_IRQHandler
+        SECTION .text:CODE:REORDER:NOROOT(1)
+USART3_IRQHandler
+        B USART3_IRQHandler
+
+        PUBWEAK EXTI15_10_IRQHandler
+        SECTION .text:CODE:REORDER:NOROOT(1)
+EXTI15_10_IRQHandler
+        B EXTI15_10_IRQHandler
+
+        PUBWEAK RTC_Alarm_IRQHandler
+        SECTION .text:CODE:REORDER:NOROOT(1)
+RTC_Alarm_IRQHandler
+        B RTC_Alarm_IRQHandler
+
+        PUBWEAK FSMC_IRQHandler
+        SECTION .text:CODE:REORDER:NOROOT(1)
+FSMC_IRQHandler
+        B FSMC_IRQHandler
+
+        PUBWEAK TIM12_IRQHandler
+        SECTION .text:CODE:REORDER:NOROOT(1)
+TIM12_IRQHandler
+        B TIM12_IRQHandler
+
+        PUBWEAK TIM13_IRQHandler
+        SECTION .text:CODE:REORDER:NOROOT(1)
+TIM13_IRQHandler
+        B TIM13_IRQHandler
+
+        PUBWEAK TIM14_IRQHandler
+        SECTION .text:CODE:REORDER:NOROOT(1)
+TIM14_IRQHandler
+        B TIM14_IRQHandler
+
+        PUBWEAK TIM5_IRQHandler
+        SECTION .text:CODE:REORDER:NOROOT(1)
+TIM5_IRQHandler
+        B TIM5_IRQHandler
+
+        PUBWEAK SPI3_IRQHandler
+        SECTION .text:CODE:REORDER:NOROOT(1)
+SPI3_IRQHandler
+        B SPI3_IRQHandler
+
+        PUBWEAK UART4_IRQHandler
+        SECTION .text:CODE:REORDER:NOROOT(1)
+UART4_IRQHandler
+        B UART4_IRQHandler
+
+        PUBWEAK UART5_IRQHandler
+        SECTION .text:CODE:REORDER:NOROOT(1)
+UART5_IRQHandler
+        B UART5_IRQHandler
+
+        PUBWEAK TIM6_IRQHandler
+        SECTION .text:CODE:REORDER:NOROOT(1)
+TIM6_IRQHandler
+        B TIM6_IRQHandler
+
+        PUBWEAK TIM7_IRQHandler
+        SECTION .text:CODE:REORDER:NOROOT(1)
+TIM7_IRQHandler
+        B TIM7_IRQHandler
+
+        PUBWEAK DMA2_Channel1_IRQHandler
+        SECTION .text:CODE:REORDER:NOROOT(1)
+DMA2_Channel1_IRQHandler
+        B DMA2_Channel1_IRQHandler
+
+        PUBWEAK DMA2_Channel2_IRQHandler
+        SECTION .text:CODE:REORDER:NOROOT(1)
+DMA2_Channel2_IRQHandler
+        B DMA2_Channel2_IRQHandler
+
+        PUBWEAK DMA2_Channel3_IRQHandler
+        SECTION .text:CODE:REORDER:NOROOT(1)
+DMA2_Channel3_IRQHandler
+        B DMA2_Channel3_IRQHandler
+
+        PUBWEAK DMA2_Channel4_5_IRQHandler
+        SECTION .text:CODE:REORDER:NOROOT(1)
+DMA2_Channel4_5_IRQHandler
+        B DMA2_Channel4_5_IRQHandler
+        
+        
+        END
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

bsp/stm32f10x_HAL/Libraries/CMSIS/Device/ST/STM32F1xx/Source/Templates/iar/startup_stm32f102x6.s

@@ -0,0 +1,355 @@
+;******************** (C) COPYRIGHT 2017 STMicroelectronics ********************
+;* File Name          : startup_stm32f102x6.s
+;* Author             : MCD Application Team
+;* Version            : V4.2.0
+;* Date               : 31-March-2017
+;* Description        : STM32F102x6 USB Line Devices vector table for EWARM
+;*                      toolchain.
+;*                      This module performs:
+;*                      - Set the initial SP
+;*                      - Configure the clock system
+;*                      - Set the initial PC == __iar_program_start,
+;*                      - Set the vector table entries with the exceptions ISR 
+;*                        address.
+;*                      After Reset the Cortex-M3 processor is in Thread mode,
+;*                      priority is Privileged, and the Stack is set to Main.
+;********************************************************************************
+;* 
+;* <h2><center>&copy; COPYRIGHT(c) 2017 STMicroelectronics</center></h2>
+;* 
+;* Redistribution and use in source and binary forms, with or without modification,
+;* are permitted provided that the following conditions are met:
+;*   1. Redistributions of source code must retain the above copyright notice,
+;*      this list of conditions and the following disclaimer.
+;*   2. Redistributions in binary form must reproduce the above copyright notice,
+;*      this list of conditions and the following disclaimer in the documentation
+;*      and/or other materials provided with the distribution.
+;*   3. Neither the name of STMicroelectronics nor the names of its contributors
+;*      may be used to endorse or promote products derived from this software
+;*      without specific prior written permission.
+;* 
+;* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+;* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+;* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+;* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+;* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+;* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+;* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+;* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+;* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+;* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+;* 
+;*******************************************************************************
+;
+;
+; The modules in this file are included in the libraries, and may be replaced
+; by any user-defined modules that define the PUBLIC symbol _program_start or
+; a user defined start symbol.
+; To override the cstartup defined in the library, simply add your modified
+; version to the workbench project.
+;
+; The vector table is normally located at address 0.
+; When debugging in RAM, it can be located in RAM, aligned to at least 2^6.
+; The name "__vector_table" has special meaning for C-SPY:
+; it is where the SP start value is found, and the NVIC vector
+; table register (VTOR) is initialized to this address if != 0.
+;
+; Cortex-M version
+;
+
+        MODULE  ?cstartup
+
+        ;; Forward declaration of sections.
+        SECTION CSTACK:DATA:NOROOT(3)
+
+        SECTION .intvec:CODE:NOROOT(2)
+
+        EXTERN  __iar_program_start
+        EXTERN  SystemInit        
+        PUBLIC  __vector_table
+
+        DATA
+__vector_table
+        DCD     sfe(CSTACK)
+        DCD     Reset_Handler             ; Reset Handler
+        DCD     NMI_Handler               ; NMI Handler
+        DCD     HardFault_Handler         ; Hard Fault Handler
+        DCD     MemManage_Handler         ; MPU Fault Handler
+        DCD     BusFault_Handler          ; Bus Fault Handler
+        DCD     UsageFault_Handler        ; Usage Fault Handler
+        DCD     0                         ; Reserved
+        DCD     0                         ; Reserved
+        DCD     0                         ; Reserved
+        DCD     0                         ; Reserved
+        DCD     SVC_Handler               ; SVCall Handler
+        DCD     DebugMon_Handler          ; Debug Monitor Handler
+        DCD     0                         ; Reserved
+        DCD     PendSV_Handler            ; PendSV Handler
+        DCD     SysTick_Handler           ; SysTick Handler
+
+         ; External Interrupts
+        DCD     WWDG_IRQHandler           ; Window Watchdog
+        DCD     PVD_IRQHandler            ; PVD through EXTI Line detect
+        DCD     TAMPER_IRQHandler         ; Tamper
+        DCD     RTC_IRQHandler            ; RTC
+        DCD     FLASH_IRQHandler          ; Flash
+        DCD     RCC_IRQHandler            ; RCC
+        DCD     EXTI0_IRQHandler          ; EXTI Line 0
+        DCD     EXTI1_IRQHandler          ; EXTI Line 1
+        DCD     EXTI2_IRQHandler          ; EXTI Line 2
+        DCD     EXTI3_IRQHandler          ; EXTI Line 3
+        DCD     EXTI4_IRQHandler          ; EXTI Line 4
+        DCD     DMA1_Channel1_IRQHandler  ; DMA1 Channel 1
+        DCD     DMA1_Channel2_IRQHandler  ; DMA1 Channel 2
+        DCD     DMA1_Channel3_IRQHandler  ; DMA1 Channel 3
+        DCD     DMA1_Channel4_IRQHandler  ; DMA1 Channel 4
+        DCD     DMA1_Channel5_IRQHandler  ; DMA1 Channel 5
+        DCD     DMA1_Channel6_IRQHandler  ; DMA1 Channel 6
+        DCD     DMA1_Channel7_IRQHandler  ; DMA1 Channel 7
+        DCD     ADC1_IRQHandler           ; ADC1
+        DCD     USB_HP_IRQHandler  	      ; USB High Priority
+        DCD     USB_LP_IRQHandler         ; USB Low  Priority
+        DCD     0                         ; Reserved
+        DCD     0                         ; Reserved
+        DCD     EXTI9_5_IRQHandler        ; EXTI Line 9..5
+        DCD     0                         ; Reserved
+        DCD     0                         ; Reserved
+        DCD     0                         ; Reserved
+        DCD     0                         ; Reserved
+        DCD     TIM2_IRQHandler           ; TIM2
+        DCD     TIM3_IRQHandler           ; TIM3
+        DCD     0                         ; Reserved
+        DCD     I2C1_EV_IRQHandler        ; I2C1 Event
+        DCD     I2C1_ER_IRQHandler        ; I2C1 Error
+        DCD     0                         ; Reserved
+        DCD     0                         ; Reserved
+        DCD     SPI1_IRQHandler           ; SPI1
+        DCD     0                         ; Reserved
+        DCD     USART1_IRQHandler         ; USART1
+        DCD     USART2_IRQHandler         ; USART2
+        DCD     0                         ; Reserved
+        DCD     EXTI15_10_IRQHandler      ; EXTI Line 15..10
+        DCD     RTC_Alarm_IRQHandler       ; RTC Alarm through EXTI Line
+        DCD     USBWakeUp_IRQHandler      ; USB Wakeup from suspend
+
+;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
+;;
+;; Default interrupt handlers.
+;;
+        THUMB
+
+        PUBWEAK Reset_Handler
+        SECTION .text:CODE:REORDER:NOROOT(2)
+Reset_Handler
+        LDR     R0, =SystemInit
+        BLX     R0
+        LDR     R0, =__iar_program_start
+        BX      R0
+        
+        PUBWEAK NMI_Handler
+        SECTION .text:CODE:REORDER:NOROOT(1)
+NMI_Handler
+        B NMI_Handler
+        
+        PUBWEAK HardFault_Handler
+        SECTION .text:CODE:REORDER:NOROOT(1)
+HardFault_Handler
+        B HardFault_Handler
+        
+        PUBWEAK MemManage_Handler
+        SECTION .text:CODE:REORDER:NOROOT(1)
+MemManage_Handler
+        B MemManage_Handler
+        
+        PUBWEAK BusFault_Handler
+        SECTION .text:CODE:REORDER:NOROOT(1)
+BusFault_Handler
+        B BusFault_Handler
+        
+        PUBWEAK UsageFault_Handler
+        SECTION .text:CODE:REORDER:NOROOT(1)
+UsageFault_Handler
+        B UsageFault_Handler
+        
+        PUBWEAK SVC_Handler
+        SECTION .text:CODE:REORDER:NOROOT(1)
+SVC_Handler
+        B SVC_Handler
+        
+        PUBWEAK DebugMon_Handler
+        SECTION .text:CODE:REORDER:NOROOT(1)
+DebugMon_Handler
+        B DebugMon_Handler
+        
+        PUBWEAK PendSV_Handler
+        SECTION .text:CODE:REORDER:NOROOT(1)
+PendSV_Handler
+        B PendSV_Handler
+        
+        PUBWEAK SysTick_Handler
+        SECTION .text:CODE:REORDER:NOROOT(1)
+SysTick_Handler
+        B SysTick_Handler
+        
+        PUBWEAK WWDG_IRQHandler
+        SECTION .text:CODE:REORDER:NOROOT(1)
+WWDG_IRQHandler
+        B WWDG_IRQHandler
+        
+        PUBWEAK PVD_IRQHandler
+        SECTION .text:CODE:REORDER:NOROOT(1)
+PVD_IRQHandler
+        B PVD_IRQHandler
+        
+        PUBWEAK TAMPER_IRQHandler
+        SECTION .text:CODE:REORDER:NOROOT(1)
+TAMPER_IRQHandler
+        B TAMPER_IRQHandler
+        
+        PUBWEAK RTC_IRQHandler
+        SECTION .text:CODE:REORDER:NOROOT(1)
+RTC_IRQHandler
+        B RTC_IRQHandler
+        
+        PUBWEAK FLASH_IRQHandler
+        SECTION .text:CODE:REORDER:NOROOT(1)
+FLASH_IRQHandler
+        B FLASH_IRQHandler
+        
+        PUBWEAK RCC_IRQHandler
+        SECTION .text:CODE:REORDER:NOROOT(1)
+RCC_IRQHandler
+        B RCC_IRQHandler
+        
+        PUBWEAK EXTI0_IRQHandler
+        SECTION .text:CODE:REORDER:NOROOT(1)
+EXTI0_IRQHandler
+        B EXTI0_IRQHandler
+        
+        PUBWEAK EXTI1_IRQHandler
+        SECTION .text:CODE:REORDER:NOROOT(1)
+EXTI1_IRQHandler
+        B EXTI1_IRQHandler
+        
+        PUBWEAK EXTI2_IRQHandler
+        SECTION .text:CODE:REORDER:NOROOT(1)
+EXTI2_IRQHandler
+        B EXTI2_IRQHandler
+        
+        PUBWEAK EXTI3_IRQHandler
+        SECTION .text:CODE:REORDER:NOROOT(1)
+EXTI3_IRQHandler
+        B EXTI3_IRQHandler
+        
+        PUBWEAK EXTI4_IRQHandler
+        SECTION .text:CODE:REORDER:NOROOT(1)
+EXTI4_IRQHandler
+        B EXTI4_IRQHandler
+        
+        PUBWEAK DMA1_Channel1_IRQHandler
+        SECTION .text:CODE:REORDER:NOROOT(1)
+DMA1_Channel1_IRQHandler
+        B DMA1_Channel1_IRQHandler
+        
+        PUBWEAK DMA1_Channel2_IRQHandler
+        SECTION .text:CODE:REORDER:NOROOT(1)
+DMA1_Channel2_IRQHandler
+        B DMA1_Channel2_IRQHandler
+        
+        PUBWEAK DMA1_Channel3_IRQHandler
+        SECTION .text:CODE:REORDER:NOROOT(1)
+DMA1_Channel3_IRQHandler
+        B DMA1_Channel3_IRQHandler
+        
+        PUBWEAK DMA1_Channel4_IRQHandler
+        SECTION .text:CODE:REORDER:NOROOT(1)
+DMA1_Channel4_IRQHandler
+        B DMA1_Channel4_IRQHandler
+        
+        PUBWEAK DMA1_Channel5_IRQHandler
+        SECTION .text:CODE:REORDER:NOROOT(1)
+DMA1_Channel5_IRQHandler
+        B DMA1_Channel5_IRQHandler
+        
+        PUBWEAK DMA1_Channel6_IRQHandler
+        SECTION .text:CODE:REORDER:NOROOT(1)
+DMA1_Channel6_IRQHandler
+        B DMA1_Channel6_IRQHandler
+        
+        PUBWEAK DMA1_Channel7_IRQHandler
+        SECTION .text:CODE:REORDER:NOROOT(1)
+DMA1_Channel7_IRQHandler
+        B DMA1_Channel7_IRQHandler
+        
+        PUBWEAK ADC1_IRQHandler
+        SECTION .text:CODE:REORDER:NOROOT(1)
+ADC1_IRQHandler
+        B ADC1_IRQHandler
+         
+        PUBWEAK USB_HP_IRQHandler
+        SECTION .text:CODE:REORDER:NOROOT(1)
+USB_HP_IRQHandler
+        B USB_HP_IRQHandler
+        
+        PUBWEAK USB_LP_IRQHandler
+        SECTION .text:CODE:REORDER:NOROOT(1)
+USB_LP_IRQHandler
+        B USB_LP_IRQHandler
+        
+        PUBWEAK EXTI9_5_IRQHandler
+        SECTION .text:CODE:REORDER:NOROOT(1)
+EXTI9_5_IRQHandler
+        B EXTI9_5_IRQHandler      
+        
+        PUBWEAK TIM2_IRQHandler
+        SECTION .text:CODE:REORDER:NOROOT(1)
+TIM2_IRQHandler
+        B TIM2_IRQHandler
+        
+        PUBWEAK TIM3_IRQHandler
+        SECTION .text:CODE:REORDER:NOROOT(1)
+TIM3_IRQHandler
+        B TIM3_IRQHandler
+        
+        PUBWEAK I2C1_EV_IRQHandler
+        SECTION .text:CODE:REORDER:NOROOT(1)
+I2C1_EV_IRQHandler
+        B I2C1_EV_IRQHandler
+        
+        PUBWEAK I2C1_ER_IRQHandler
+        SECTION .text:CODE:REORDER:NOROOT(1)
+I2C1_ER_IRQHandler
+        B I2C1_ER_IRQHandler
+        
+        PUBWEAK SPI1_IRQHandler
+        SECTION .text:CODE:REORDER:NOROOT(1)
+SPI1_IRQHandler
+        B SPI1_IRQHandler
+                      
+        PUBWEAK USART1_IRQHandler
+        SECTION .text:CODE:REORDER:NOROOT(1)
+USART1_IRQHandler
+        B USART1_IRQHandler
+
+        PUBWEAK USART2_IRQHandler
+        SECTION .text:CODE:REORDER:NOROOT(1)
+USART2_IRQHandler
+        B USART2_IRQHandler
+
+        PUBWEAK EXTI15_10_IRQHandler
+        SECTION .text:CODE:REORDER:NOROOT(1)
+EXTI15_10_IRQHandler
+        B EXTI15_10_IRQHandler
+
+        PUBWEAK RTC_Alarm_IRQHandler
+        SECTION .text:CODE:REORDER:NOROOT(1)
+RTC_Alarm_IRQHandler
+        B RTC_Alarm_IRQHandler
+
+        PUBWEAK USBWakeUp_IRQHandler
+        SECTION .text:CODE:REORDER:NOROOT(1)
+USBWakeUp_IRQHandler
+        B USBWakeUp_IRQHandler
+
+        END
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

bsp/stm32f10x_HAL/Libraries/CMSIS/Device/ST/STM32F1xx/Source/Templates/iar/startup_stm32f102xb.s

@@ -0,0 +1,380 @@
+;******************** (C) COPYRIGHT 2017 STMicroelectronics ********************
+;* File Name          : startup_stm32f102xb.s
+;* Author             : MCD Application Team
+;* Version            : V4.2.0
+;* Date               : 31-March-2017
+;* Description        : STM32F102xB USB Line Devices vector table for 
+;*                      EWARM toolchain.
+;*                      This module performs:
+;*                      - Set the initial SP
+;*                      - Configure the clock system
+;*                      - Set the initial PC == __iar_program_start,
+;*                      - Set the vector table entries with the exceptions ISR 
+;*                        address.
+;*                      After Reset the Cortex-M3 processor is in Thread mode,
+;*                      priority is Privileged, and the Stack is set to Main.
+;********************************************************************************
+;* 
+;* <h2><center>&copy; COPYRIGHT(c) 2017 STMicroelectronics</center></h2>
+;* 
+;* Redistribution and use in source and binary forms, with or without modification,
+;* are permitted provided that the following conditions are met:
+;*   1. Redistributions of source code must retain the above copyright notice,
+;*      this list of conditions and the following disclaimer.
+;*   2. Redistributions in binary form must reproduce the above copyright notice,
+;*      this list of conditions and the following disclaimer in the documentation
+;*      and/or other materials provided with the distribution.
+;*   3. Neither the name of STMicroelectronics nor the names of its contributors
+;*      may be used to endorse or promote products derived from this software
+;*      without specific prior written permission.
+;* 
+;* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+;* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+;* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+;* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+;* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+;* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+;* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+;* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+;* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+;* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+;* 
+;*******************************************************************************
+;
+;
+; The modules in this file are included in the libraries, and may be replaced
+; by any user-defined modules that define the PUBLIC symbol _program_start or
+; a user defined start symbol.
+; To override the cstartup defined in the library, simply add your modified
+; version to the workbench project.
+;
+; The vector table is normally located at address 0.
+; When debugging in RAM, it can be located in RAM, aligned to at least 2^6.
+; The name "__vector_table" has special meaning for C-SPY:
+; it is where the SP start value is found, and the NVIC vector
+; table register (VTOR) is initialized to this address if != 0.
+;
+; Cortex-M version
+;
+
+        MODULE  ?cstartup
+
+        ;; Forward declaration of sections.
+        SECTION CSTACK:DATA:NOROOT(3)
+
+        SECTION .intvec:CODE:NOROOT(2)
+
+        EXTERN  __iar_program_start
+        EXTERN  SystemInit        
+        PUBLIC  __vector_table
+
+        DATA
+__vector_table
+        DCD     sfe(CSTACK)
+        DCD     Reset_Handler             ; Reset Handler
+        DCD     NMI_Handler               ; NMI Handler
+        DCD     HardFault_Handler         ; Hard Fault Handler
+        DCD     MemManage_Handler         ; MPU Fault Handler
+        DCD     BusFault_Handler          ; Bus Fault Handler
+        DCD     UsageFault_Handler        ; Usage Fault Handler
+        DCD     0                         ; Reserved
+        DCD     0                         ; Reserved
+        DCD     0                         ; Reserved
+        DCD     0                         ; Reserved
+        DCD     SVC_Handler               ; SVCall Handler
+        DCD     DebugMon_Handler          ; Debug Monitor Handler
+        DCD     0                         ; Reserved
+        DCD     PendSV_Handler            ; PendSV Handler
+        DCD     SysTick_Handler           ; SysTick Handler
+
+         ; External Interrupts
+        DCD     WWDG_IRQHandler           ; Window Watchdog
+        DCD     PVD_IRQHandler            ; PVD through EXTI Line detect
+        DCD     TAMPER_IRQHandler         ; Tamper
+        DCD     RTC_IRQHandler            ; RTC
+        DCD     FLASH_IRQHandler          ; Flash
+        DCD     RCC_IRQHandler            ; RCC
+        DCD     EXTI0_IRQHandler          ; EXTI Line 0
+        DCD     EXTI1_IRQHandler          ; EXTI Line 1
+        DCD     EXTI2_IRQHandler          ; EXTI Line 2
+        DCD     EXTI3_IRQHandler          ; EXTI Line 3
+        DCD     EXTI4_IRQHandler          ; EXTI Line 4
+        DCD     DMA1_Channel1_IRQHandler  ; DMA1 Channel 1
+        DCD     DMA1_Channel2_IRQHandler  ; DMA1 Channel 2
+        DCD     DMA1_Channel3_IRQHandler  ; DMA1 Channel 3
+        DCD     DMA1_Channel4_IRQHandler  ; DMA1 Channel 4
+        DCD     DMA1_Channel5_IRQHandler  ; DMA1 Channel 5
+        DCD     DMA1_Channel6_IRQHandler  ; DMA1 Channel 6
+        DCD     DMA1_Channel7_IRQHandler  ; DMA1 Channel 7
+        DCD     ADC1_IRQHandler           ; ADC1
+        DCD     USB_HP_IRQHandler  	      ; USB High Priority
+        DCD     USB_LP_IRQHandler         ; USB Low  Priority
+        DCD     0                         ; Reserved
+        DCD     0                         ; Reserved
+        DCD     EXTI9_5_IRQHandler        ; EXTI Line 9..5
+        DCD     0                         ; Reserved
+        DCD     0                         ; Reserved
+        DCD     0                         ; Reserved
+        DCD     0                         ; Reserved
+        DCD     TIM2_IRQHandler           ; TIM2
+        DCD     TIM3_IRQHandler           ; TIM3
+        DCD     TIM4_IRQHandler           ; TIM4
+        DCD     I2C1_EV_IRQHandler        ; I2C1 Event
+        DCD     I2C1_ER_IRQHandler        ; I2C1 Error
+        DCD     I2C2_EV_IRQHandler        ; I2C2 Event
+        DCD     I2C2_ER_IRQHandler        ; I2C2 Error
+        DCD     SPI1_IRQHandler           ; SPI1
+        DCD     SPI2_IRQHandler           ; SPI2
+        DCD     USART1_IRQHandler         ; USART1
+        DCD     USART2_IRQHandler         ; USART2
+        DCD     USART3_IRQHandler         ; USART3
+        DCD     EXTI15_10_IRQHandler      ; EXTI Line 15..10
+        DCD     RTC_Alarm_IRQHandler       ; RTC Alarm through EXTI Line
+        DCD     USBWakeUp_IRQHandler      ; USB Wakeup from suspend
+
+;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
+;;
+;; Default interrupt handlers.
+;;
+        THUMB
+
+        PUBWEAK Reset_Handler
+        SECTION .text:CODE:REORDER:NOROOT(2)
+Reset_Handler
+        LDR     R0, =SystemInit
+        BLX     R0
+        LDR     R0, =__iar_program_start
+        BX      R0
+        
+        PUBWEAK NMI_Handler
+        SECTION .text:CODE:REORDER:NOROOT(1)
+NMI_Handler
+        B NMI_Handler
+
+        PUBWEAK HardFault_Handler
+        SECTION .text:CODE:REORDER:NOROOT(1)
+HardFault_Handler
+        B HardFault_Handler
+
+        PUBWEAK MemManage_Handler
+        SECTION .text:CODE:REORDER:NOROOT(1)
+MemManage_Handler
+        B MemManage_Handler
+
+        PUBWEAK BusFault_Handler
+        SECTION .text:CODE:REORDER:NOROOT(1)
+BusFault_Handler
+        B BusFault_Handler
+
+        PUBWEAK UsageFault_Handler
+        SECTION .text:CODE:REORDER:NOROOT(1)
+UsageFault_Handler
+        B UsageFault_Handler
+
+        PUBWEAK SVC_Handler
+        SECTION .text:CODE:REORDER:NOROOT(1)
+SVC_Handler
+        B SVC_Handler
+
+        PUBWEAK DebugMon_Handler
+        SECTION .text:CODE:REORDER:NOROOT(1)
+DebugMon_Handler
+        B DebugMon_Handler
+
+        PUBWEAK PendSV_Handler
+        SECTION .text:CODE:REORDER:NOROOT(1)
+PendSV_Handler
+        B PendSV_Handler
+
+        PUBWEAK SysTick_Handler
+        SECTION .text:CODE:REORDER:NOROOT(1)
+SysTick_Handler
+        B SysTick_Handler
+
+        PUBWEAK WWDG_IRQHandler
+        SECTION .text:CODE:REORDER:NOROOT(1)
+WWDG_IRQHandler
+        B WWDG_IRQHandler
+
+        PUBWEAK PVD_IRQHandler
+        SECTION .text:CODE:REORDER:NOROOT(1)
+PVD_IRQHandler
+        B PVD_IRQHandler
+
+        PUBWEAK TAMPER_IRQHandler
+        SECTION .text:CODE:REORDER:NOROOT(1)
+TAMPER_IRQHandler
+        B TAMPER_IRQHandler
+
+        PUBWEAK RTC_IRQHandler
+        SECTION .text:CODE:REORDER:NOROOT(1)
+RTC_IRQHandler
+        B RTC_IRQHandler
+
+        PUBWEAK FLASH_IRQHandler
+        SECTION .text:CODE:REORDER:NOROOT(1)
+FLASH_IRQHandler
+        B FLASH_IRQHandler
+
+        PUBWEAK RCC_IRQHandler
+        SECTION .text:CODE:REORDER:NOROOT(1)
+RCC_IRQHandler
+        B RCC_IRQHandler
+
+        PUBWEAK EXTI0_IRQHandler
+        SECTION .text:CODE:REORDER:NOROOT(1)
+EXTI0_IRQHandler
+        B EXTI0_IRQHandler
+
+        PUBWEAK EXTI1_IRQHandler
+        SECTION .text:CODE:REORDER:NOROOT(1)
+EXTI1_IRQHandler
+        B EXTI1_IRQHandler
+
+        PUBWEAK EXTI2_IRQHandler
+        SECTION .text:CODE:REORDER:NOROOT(1)
+EXTI2_IRQHandler
+        B EXTI2_IRQHandler
+
+        PUBWEAK EXTI3_IRQHandler
+        SECTION .text:CODE:REORDER:NOROOT(1)
+EXTI3_IRQHandler
+        B EXTI3_IRQHandler
+
+        PUBWEAK EXTI4_IRQHandler
+        SECTION .text:CODE:REORDER:NOROOT(1)
+EXTI4_IRQHandler
+        B EXTI4_IRQHandler
+
+        PUBWEAK DMA1_Channel1_IRQHandler
+        SECTION .text:CODE:REORDER:NOROOT(1)
+DMA1_Channel1_IRQHandler
+        B DMA1_Channel1_IRQHandler
+
+        PUBWEAK DMA1_Channel2_IRQHandler
+        SECTION .text:CODE:REORDER:NOROOT(1)
+DMA1_Channel2_IRQHandler
+        B DMA1_Channel2_IRQHandler
+
+        PUBWEAK DMA1_Channel3_IRQHandler
+        SECTION .text:CODE:REORDER:NOROOT(1)
+DMA1_Channel3_IRQHandler
+        B DMA1_Channel3_IRQHandler
+
+        PUBWEAK DMA1_Channel4_IRQHandler
+        SECTION .text:CODE:REORDER:NOROOT(1)
+DMA1_Channel4_IRQHandler
+        B DMA1_Channel4_IRQHandler
+
+        PUBWEAK DMA1_Channel5_IRQHandler
+        SECTION .text:CODE:REORDER:NOROOT(1)
+DMA1_Channel5_IRQHandler
+        B DMA1_Channel5_IRQHandler
+
+        PUBWEAK DMA1_Channel6_IRQHandler
+        SECTION .text:CODE:REORDER:NOROOT(1)
+DMA1_Channel6_IRQHandler
+        B DMA1_Channel6_IRQHandler
+
+        PUBWEAK DMA1_Channel7_IRQHandler
+        SECTION .text:CODE:REORDER:NOROOT(1)
+DMA1_Channel7_IRQHandler
+        B DMA1_Channel7_IRQHandler
+
+        PUBWEAK ADC1_IRQHandler
+        SECTION .text:CODE:REORDER:NOROOT(1)
+ADC1_IRQHandler
+        B ADC1_IRQHandler
+ 
+        PUBWEAK USB_HP_IRQHandler
+        SECTION .text:CODE:REORDER:NOROOT(1)
+USB_HP_IRQHandler
+        B USB_HP_IRQHandler
+        
+        PUBWEAK USB_LP_IRQHandler
+        SECTION .text:CODE:REORDER:NOROOT(1)
+USB_LP_IRQHandler
+        B USB_LP_IRQHandler
+        
+        PUBWEAK EXTI9_5_IRQHandler
+        SECTION .text:CODE:REORDER:NOROOT(1)
+EXTI9_5_IRQHandler
+        B EXTI9_5_IRQHandler
+
+        PUBWEAK TIM2_IRQHandler
+        SECTION .text:CODE:REORDER:NOROOT(1)
+TIM2_IRQHandler
+        B TIM2_IRQHandler
+
+        PUBWEAK TIM3_IRQHandler
+        SECTION .text:CODE:REORDER:NOROOT(1)
+TIM3_IRQHandler
+        B TIM3_IRQHandler
+
+        PUBWEAK TIM4_IRQHandler
+        SECTION .text:CODE:REORDER:NOROOT(1)
+TIM4_IRQHandler
+        B TIM4_IRQHandler
+
+        PUBWEAK I2C1_EV_IRQHandler
+        SECTION .text:CODE:REORDER:NOROOT(1)
+I2C1_EV_IRQHandler
+        B I2C1_EV_IRQHandler
+
+        PUBWEAK I2C1_ER_IRQHandler
+        SECTION .text:CODE:REORDER:NOROOT(1)
+I2C1_ER_IRQHandler
+        B I2C1_ER_IRQHandler
+
+        PUBWEAK I2C2_EV_IRQHandler
+        SECTION .text:CODE:REORDER:NOROOT(1)
+I2C2_EV_IRQHandler
+        B I2C2_EV_IRQHandler
+
+        PUBWEAK I2C2_ER_IRQHandler
+        SECTION .text:CODE:REORDER:NOROOT(1)
+I2C2_ER_IRQHandler
+        B I2C2_ER_IRQHandler
+
+        PUBWEAK SPI1_IRQHandler
+        SECTION .text:CODE:REORDER:NOROOT(1)
+SPI1_IRQHandler
+        B SPI1_IRQHandler
+
+        PUBWEAK SPI2_IRQHandler
+        SECTION .text:CODE:REORDER:NOROOT(1)
+SPI2_IRQHandler
+        B SPI2_IRQHandler
+
+        PUBWEAK USART1_IRQHandler
+        SECTION .text:CODE:REORDER:NOROOT(1)
+USART1_IRQHandler
+        B USART1_IRQHandler
+
+        PUBWEAK USART2_IRQHandler
+        SECTION .text:CODE:REORDER:NOROOT(1)
+USART2_IRQHandler
+        B USART2_IRQHandler
+
+        PUBWEAK USART3_IRQHandler
+        SECTION .text:CODE:REORDER:NOROOT(1)
+USART3_IRQHandler
+        B USART3_IRQHandler
+
+        PUBWEAK EXTI15_10_IRQHandler
+        SECTION .text:CODE:REORDER:NOROOT(1)
+EXTI15_10_IRQHandler
+        B EXTI15_10_IRQHandler
+
+        PUBWEAK RTC_Alarm_IRQHandler
+        SECTION .text:CODE:REORDER:NOROOT(1)
+RTC_Alarm_IRQHandler
+        B RTC_Alarm_IRQHandler
+
+        PUBWEAK USBWakeUp_IRQHandler
+        SECTION .text:CODE:REORDER:NOROOT(1)
+USBWakeUp_IRQHandler
+        B USBWakeUp_IRQHandler
+
+        END
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

bsp/stm32f10x_HAL/Libraries/CMSIS/Device/ST/STM32F1xx/Source/Templates/iar/startup_stm32f103x6.s

@@ -0,0 +1,385 @@
+;******************** (C) COPYRIGHT 2017 STMicroelectronics ********************
+;* File Name          : startup_stm32f103x6.s
+;* Author             : MCD Application Team
+;* Version            : V4.2.0
+;* Date               : 31-March-2017
+;* Description        : STM32F103x6 Performance Line Devices vector table for EWARM
+;*                      toolchain.
+;*                      This module performs:
+;*                      - Set the initial SP
+;*                      - Configure the clock system
+;*                      - Set the initial PC == __iar_program_start,
+;*                      - Set the vector table entries with the exceptions ISR 
+;*                        address.
+;*                      After Reset the Cortex-M3 processor is in Thread mode,
+;*                      priority is Privileged, and the Stack is set to Main.
+;********************************************************************************
+;* 
+;* <h2><center>&copy; COPYRIGHT(c) 2017 STMicroelectronics</center></h2>
+;* 
+;* Redistribution and use in source and binary forms, with or without modification,
+;* are permitted provided that the following conditions are met:
+;*   1. Redistributions of source code must retain the above copyright notice,
+;*      this list of conditions and the following disclaimer.
+;*   2. Redistributions in binary form must reproduce the above copyright notice,
+;*      this list of conditions and the following disclaimer in the documentation
+;*      and/or other materials provided with the distribution.
+;*   3. Neither the name of STMicroelectronics nor the names of its contributors
+;*      may be used to endorse or promote products derived from this software
+;*      without specific prior written permission.
+;* 
+;* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+;* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+;* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+;* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+;* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+;* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+;* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+;* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+;* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+;* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+;* 
+;*******************************************************************************
+;
+;
+; The modules in this file are included in the libraries, and may be replaced
+; by any user-defined modules that define the PUBLIC symbol _program_start or
+; a user defined start symbol.
+; To override the cstartup defined in the library, simply add your modified
+; version to the workbench project.
+;
+; The vector table is normally located at address 0.
+; When debugging in RAM, it can be located in RAM, aligned to at least 2^6.
+; The name "__vector_table" has special meaning for C-SPY:
+; it is where the SP start value is found, and the NVIC vector
+; table register (VTOR) is initialized to this address if != 0.
+;
+; Cortex-M version
+;
+
+        MODULE  ?cstartup
+
+        ;; Forward declaration of sections.
+        SECTION CSTACK:DATA:NOROOT(3)
+
+        SECTION .intvec:CODE:NOROOT(2)
+
+        EXTERN  __iar_program_start
+        EXTERN  SystemInit        
+        PUBLIC  __vector_table
+
+        DATA
+__vector_table
+        DCD     sfe(CSTACK)
+        DCD     Reset_Handler             ; Reset Handler
+        DCD     NMI_Handler               ; NMI Handler
+        DCD     HardFault_Handler         ; Hard Fault Handler
+        DCD     MemManage_Handler         ; MPU Fault Handler
+        DCD     BusFault_Handler          ; Bus Fault Handler
+        DCD     UsageFault_Handler        ; Usage Fault Handler
+        DCD     0                         ; Reserved
+        DCD     0                         ; Reserved
+        DCD     0                         ; Reserved
+        DCD     0                         ; Reserved
+        DCD     SVC_Handler               ; SVCall Handler
+        DCD     DebugMon_Handler          ; Debug Monitor Handler
+        DCD     0                         ; Reserved
+        DCD     PendSV_Handler            ; PendSV Handler
+        DCD     SysTick_Handler           ; SysTick Handler
+
+         ; External Interrupts
+        DCD     WWDG_IRQHandler           ; Window Watchdog
+        DCD     PVD_IRQHandler            ; PVD through EXTI Line detect
+        DCD     TAMPER_IRQHandler         ; Tamper
+        DCD     RTC_IRQHandler            ; RTC
+        DCD     FLASH_IRQHandler          ; Flash
+        DCD     RCC_IRQHandler            ; RCC
+        DCD     EXTI0_IRQHandler          ; EXTI Line 0
+        DCD     EXTI1_IRQHandler          ; EXTI Line 1
+        DCD     EXTI2_IRQHandler          ; EXTI Line 2
+        DCD     EXTI3_IRQHandler          ; EXTI Line 3
+        DCD     EXTI4_IRQHandler          ; EXTI Line 4
+        DCD     DMA1_Channel1_IRQHandler  ; DMA1 Channel 1
+        DCD     DMA1_Channel2_IRQHandler  ; DMA1 Channel 2
+        DCD     DMA1_Channel3_IRQHandler  ; DMA1 Channel 3
+        DCD     DMA1_Channel4_IRQHandler  ; DMA1 Channel 4
+        DCD     DMA1_Channel5_IRQHandler  ; DMA1 Channel 5
+        DCD     DMA1_Channel6_IRQHandler  ; DMA1 Channel 6
+        DCD     DMA1_Channel7_IRQHandler  ; DMA1 Channel 7
+        DCD     ADC1_2_IRQHandler         ; ADC1 & ADC2
+        DCD     USB_HP_CAN1_TX_IRQHandler  ; USB High Priority or CAN1 TX
+        DCD     USB_LP_CAN1_RX0_IRQHandler ; USB Low  Priority or CAN1 RX0
+        DCD     CAN1_RX1_IRQHandler       ; CAN1 RX1
+        DCD     CAN1_SCE_IRQHandler       ; CAN1 SCE
+        DCD     EXTI9_5_IRQHandler        ; EXTI Line 9..5
+        DCD     TIM1_BRK_IRQHandler       ; TIM1 Break
+        DCD     TIM1_UP_IRQHandler        ; TIM1 Update
+        DCD     TIM1_TRG_COM_IRQHandler   ; TIM1 Trigger and Commutation
+        DCD     TIM1_CC_IRQHandler        ; TIM1 Capture Compare
+        DCD     TIM2_IRQHandler           ; TIM2
+        DCD     TIM3_IRQHandler           ; TIM3
+        DCD     0                         ; Reserved
+        DCD     I2C1_EV_IRQHandler        ; I2C1 Event
+        DCD     I2C1_ER_IRQHandler        ; I2C1 Error
+        DCD     0                         ; Reserved
+        DCD     0                         ; Reserved
+        DCD     SPI1_IRQHandler           ; SPI1
+        DCD     0                         ; Reserved
+        DCD     USART1_IRQHandler         ; USART1
+        DCD     USART2_IRQHandler         ; USART2
+        DCD     0                         ; Reserved
+        DCD     EXTI15_10_IRQHandler      ; EXTI Line 15..10
+        DCD     RTC_Alarm_IRQHandler       ; RTC Alarm through EXTI Line
+        DCD     USBWakeUp_IRQHandler      ; USB Wakeup from suspend
+
+;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
+;;
+;; Default interrupt handlers.
+;;
+        THUMB
+
+        PUBWEAK Reset_Handler
+        SECTION .text:CODE:REORDER:NOROOT(2)
+Reset_Handler
+        LDR     R0, =SystemInit
+        BLX     R0
+        LDR     R0, =__iar_program_start
+        BX      R0
+        
+        PUBWEAK NMI_Handler
+        SECTION .text:CODE:REORDER:NOROOT(1)
+NMI_Handler
+        B NMI_Handler
+        
+        PUBWEAK HardFault_Handler
+        SECTION .text:CODE:REORDER:NOROOT(1)
+HardFault_Handler
+        B HardFault_Handler
+        
+        PUBWEAK MemManage_Handler
+        SECTION .text:CODE:REORDER:NOROOT(1)
+MemManage_Handler
+        B MemManage_Handler
+        
+        PUBWEAK BusFault_Handler
+        SECTION .text:CODE:REORDER:NOROOT(1)
+BusFault_Handler
+        B BusFault_Handler
+        
+        PUBWEAK UsageFault_Handler
+        SECTION .text:CODE:REORDER:NOROOT(1)
+UsageFault_Handler
+        B UsageFault_Handler
+        
+        PUBWEAK SVC_Handler
+        SECTION .text:CODE:REORDER:NOROOT(1)
+SVC_Handler
+        B SVC_Handler
+        
+        PUBWEAK DebugMon_Handler
+        SECTION .text:CODE:REORDER:NOROOT(1)
+DebugMon_Handler
+        B DebugMon_Handler
+        
+        PUBWEAK PendSV_Handler
+        SECTION .text:CODE:REORDER:NOROOT(1)
+PendSV_Handler
+        B PendSV_Handler
+        
+        PUBWEAK SysTick_Handler
+        SECTION .text:CODE:REORDER:NOROOT(1)
+SysTick_Handler
+        B SysTick_Handler
+        
+        PUBWEAK WWDG_IRQHandler
+        SECTION .text:CODE:REORDER:NOROOT(1)
+WWDG_IRQHandler
+        B WWDG_IRQHandler
+        
+        PUBWEAK PVD_IRQHandler
+        SECTION .text:CODE:REORDER:NOROOT(1)
+PVD_IRQHandler
+        B PVD_IRQHandler
+        
+        PUBWEAK TAMPER_IRQHandler
+        SECTION .text:CODE:REORDER:NOROOT(1)
+TAMPER_IRQHandler
+        B TAMPER_IRQHandler
+        
+        PUBWEAK RTC_IRQHandler
+        SECTION .text:CODE:REORDER:NOROOT(1)
+RTC_IRQHandler
+        B RTC_IRQHandler
+        
+        PUBWEAK FLASH_IRQHandler
+        SECTION .text:CODE:REORDER:NOROOT(1)
+FLASH_IRQHandler
+        B FLASH_IRQHandler
+        
+        PUBWEAK RCC_IRQHandler
+        SECTION .text:CODE:REORDER:NOROOT(1)
+RCC_IRQHandler
+        B RCC_IRQHandler
+        
+        PUBWEAK EXTI0_IRQHandler
+        SECTION .text:CODE:REORDER:NOROOT(1)
+EXTI0_IRQHandler
+        B EXTI0_IRQHandler
+        
+        PUBWEAK EXTI1_IRQHandler
+        SECTION .text:CODE:REORDER:NOROOT(1)
+EXTI1_IRQHandler
+        B EXTI1_IRQHandler
+        
+        PUBWEAK EXTI2_IRQHandler
+        SECTION .text:CODE:REORDER:NOROOT(1)
+EXTI2_IRQHandler
+        B EXTI2_IRQHandler
+        
+        PUBWEAK EXTI3_IRQHandler
+        SECTION .text:CODE:REORDER:NOROOT(1)
+EXTI3_IRQHandler
+        B EXTI3_IRQHandler
+        
+        PUBWEAK EXTI4_IRQHandler
+        SECTION .text:CODE:REORDER:NOROOT(1)
+EXTI4_IRQHandler
+        B EXTI4_IRQHandler
+        
+        PUBWEAK DMA1_Channel1_IRQHandler
+        SECTION .text:CODE:REORDER:NOROOT(1)
+DMA1_Channel1_IRQHandler
+        B DMA1_Channel1_IRQHandler
+        
+        PUBWEAK DMA1_Channel2_IRQHandler
+        SECTION .text:CODE:REORDER:NOROOT(1)
+DMA1_Channel2_IRQHandler
+        B DMA1_Channel2_IRQHandler
+        
+        PUBWEAK DMA1_Channel3_IRQHandler
+        SECTION .text:CODE:REORDER:NOROOT(1)
+DMA1_Channel3_IRQHandler
+        B DMA1_Channel3_IRQHandler
+        
+        PUBWEAK DMA1_Channel4_IRQHandler
+        SECTION .text:CODE:REORDER:NOROOT(1)
+DMA1_Channel4_IRQHandler
+        B DMA1_Channel4_IRQHandler
+        
+        PUBWEAK DMA1_Channel5_IRQHandler
+        SECTION .text:CODE:REORDER:NOROOT(1)
+DMA1_Channel5_IRQHandler
+        B DMA1_Channel5_IRQHandler
+        
+        PUBWEAK DMA1_Channel6_IRQHandler
+        SECTION .text:CODE:REORDER:NOROOT(1)
+DMA1_Channel6_IRQHandler
+        B DMA1_Channel6_IRQHandler
+        
+        PUBWEAK DMA1_Channel7_IRQHandler
+        SECTION .text:CODE:REORDER:NOROOT(1)
+DMA1_Channel7_IRQHandler
+        B DMA1_Channel7_IRQHandler
+        
+        PUBWEAK ADC1_2_IRQHandler
+        SECTION .text:CODE:REORDER:NOROOT(1)
+ADC1_2_IRQHandler
+        B ADC1_2_IRQHandler
+        
+        PUBWEAK USB_HP_CAN1_TX_IRQHandler
+        SECTION .text:CODE:REORDER:NOROOT(1)
+USB_HP_CAN1_TX_IRQHandler
+        B USB_HP_CAN1_TX_IRQHandler
+        
+        PUBWEAK USB_LP_CAN1_RX0_IRQHandler
+        SECTION .text:CODE:REORDER:NOROOT(1)
+USB_LP_CAN1_RX0_IRQHandler
+        B USB_LP_CAN1_RX0_IRQHandler
+        
+        PUBWEAK CAN1_RX1_IRQHandler
+        SECTION .text:CODE:REORDER:NOROOT(1)
+CAN1_RX1_IRQHandler
+        B CAN1_RX1_IRQHandler
+        
+        PUBWEAK CAN1_SCE_IRQHandler
+        SECTION .text:CODE:REORDER:NOROOT(1)
+CAN1_SCE_IRQHandler
+        B CAN1_SCE_IRQHandler
+        
+        PUBWEAK EXTI9_5_IRQHandler
+        SECTION .text:CODE:REORDER:NOROOT(1)
+EXTI9_5_IRQHandler
+        B EXTI9_5_IRQHandler
+        
+        PUBWEAK TIM1_BRK_IRQHandler
+        SECTION .text:CODE:REORDER:NOROOT(1)
+TIM1_BRK_IRQHandler
+        B TIM1_BRK_IRQHandler
+        
+        PUBWEAK TIM1_UP_IRQHandler
+        SECTION .text:CODE:REORDER:NOROOT(1)
+TIM1_UP_IRQHandler
+        B TIM1_UP_IRQHandler
+        
+        PUBWEAK TIM1_TRG_COM_IRQHandler
+        SECTION .text:CODE:REORDER:NOROOT(1)
+TIM1_TRG_COM_IRQHandler
+        B TIM1_TRG_COM_IRQHandler
+        
+        PUBWEAK TIM1_CC_IRQHandler
+        SECTION .text:CODE:REORDER:NOROOT(1)
+TIM1_CC_IRQHandler
+        B TIM1_CC_IRQHandler
+        
+        PUBWEAK TIM2_IRQHandler
+        SECTION .text:CODE:REORDER:NOROOT(1)
+TIM2_IRQHandler
+        B TIM2_IRQHandler
+        
+        PUBWEAK TIM3_IRQHandler
+        SECTION .text:CODE:REORDER:NOROOT(1)
+TIM3_IRQHandler
+        B TIM3_IRQHandler
+        
+        PUBWEAK I2C1_EV_IRQHandler
+        SECTION .text:CODE:REORDER:NOROOT(1)
+I2C1_EV_IRQHandler
+        B I2C1_EV_IRQHandler
+        
+        PUBWEAK I2C1_ER_IRQHandler
+        SECTION .text:CODE:REORDER:NOROOT(1)
+I2C1_ER_IRQHandler
+        B I2C1_ER_IRQHandler
+        
+        PUBWEAK SPI1_IRQHandler
+        SECTION .text:CODE:REORDER:NOROOT(1)
+SPI1_IRQHandler
+        B SPI1_IRQHandler
+                      
+        PUBWEAK USART1_IRQHandler
+        SECTION .text:CODE:REORDER:NOROOT(1)
+USART1_IRQHandler
+        B USART1_IRQHandler
+
+        PUBWEAK USART2_IRQHandler
+        SECTION .text:CODE:REORDER:NOROOT(1)
+USART2_IRQHandler
+        B USART2_IRQHandler
+
+        PUBWEAK EXTI15_10_IRQHandler
+        SECTION .text:CODE:REORDER:NOROOT(1)
+EXTI15_10_IRQHandler
+        B EXTI15_10_IRQHandler
+
+        PUBWEAK RTC_Alarm_IRQHandler
+        SECTION .text:CODE:REORDER:NOROOT(1)
+RTC_Alarm_IRQHandler
+        B RTC_Alarm_IRQHandler
+
+        PUBWEAK USBWakeUp_IRQHandler
+        SECTION .text:CODE:REORDER:NOROOT(1)
+USBWakeUp_IRQHandler
+        B USBWakeUp_IRQHandler
+
+        END
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

bsp/stm32f10x_HAL/Libraries/CMSIS/Device/ST/STM32F1xx/Source/Templates/iar/startup_stm32f103xb.s

@@ -0,0 +1,410 @@
+;******************** (C) COPYRIGHT 2017 STMicroelectronics ********************
+;* File Name          : startup_stm32f103xb.s
+;* Author             : MCD Application Team
+;* Version            : V4.2.0
+;* Date               : 31-March-2017
+;* Description        : STM32F103xB Performance Line Devices vector table for 
+;*                      EWARM toolchain.
+;*                      This module performs:
+;*                      - Set the initial SP
+;*                      - Configure the clock system
+;*                      - Set the initial PC == __iar_program_start,
+;*                      - Set the vector table entries with the exceptions ISR 
+;*                        address.
+;*                      After Reset the Cortex-M3 processor is in Thread mode,
+;*                      priority is Privileged, and the Stack is set to Main.
+;********************************************************************************
+;* 
+;* <h2><center>&copy; COPYRIGHT(c) 2017 STMicroelectronics</center></h2>
+;* 
+;* Redistribution and use in source and binary forms, with or without modification,
+;* are permitted provided that the following conditions are met:
+;*   1. Redistributions of source code must retain the above copyright notice,
+;*      this list of conditions and the following disclaimer.
+;*   2. Redistributions in binary form must reproduce the above copyright notice,
+;*      this list of conditions and the following disclaimer in the documentation
+;*      and/or other materials provided with the distribution.
+;*   3. Neither the name of STMicroelectronics nor the names of its contributors
+;*      may be used to endorse or promote products derived from this software
+;*      without specific prior written permission.
+;* 
+;* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+;* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+;* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+;* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+;* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+;* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+;* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+;* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+;* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+;* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+;* 
+;*******************************************************************************
+;
+;
+; The modules in this file are included in the libraries, and may be replaced
+; by any user-defined modules that define the PUBLIC symbol _program_start or
+; a user defined start symbol.
+; To override the cstartup defined in the library, simply add your modified
+; version to the workbench project.
+;
+; The vector table is normally located at address 0.
+; When debugging in RAM, it can be located in RAM, aligned to at least 2^6.
+; The name "__vector_table" has special meaning for C-SPY:
+; it is where the SP start value is found, and the NVIC vector
+; table register (VTOR) is initialized to this address if != 0.
+;
+; Cortex-M version
+;
+
+        MODULE  ?cstartup
+
+        ;; Forward declaration of sections.
+        SECTION CSTACK:DATA:NOROOT(3)
+
+        SECTION .intvec:CODE:NOROOT(2)
+
+        EXTERN  __iar_program_start
+        EXTERN  SystemInit        
+        PUBLIC  __vector_table
+
+        DATA
+__vector_table
+        DCD     sfe(CSTACK)
+        DCD     Reset_Handler             ; Reset Handler
+        DCD     NMI_Handler               ; NMI Handler
+        DCD     HardFault_Handler         ; Hard Fault Handler
+        DCD     MemManage_Handler         ; MPU Fault Handler
+        DCD     BusFault_Handler          ; Bus Fault Handler
+        DCD     UsageFault_Handler        ; Usage Fault Handler
+        DCD     0                         ; Reserved
+        DCD     0                         ; Reserved
+        DCD     0                         ; Reserved
+        DCD     0                         ; Reserved
+        DCD     SVC_Handler               ; SVCall Handler
+        DCD     DebugMon_Handler          ; Debug Monitor Handler
+        DCD     0                         ; Reserved
+        DCD     PendSV_Handler            ; PendSV Handler
+        DCD     SysTick_Handler           ; SysTick Handler
+
+         ; External Interrupts
+        DCD     WWDG_IRQHandler           ; Window Watchdog
+        DCD     PVD_IRQHandler            ; PVD through EXTI Line detect
+        DCD     TAMPER_IRQHandler         ; Tamper
+        DCD     RTC_IRQHandler            ; RTC
+        DCD     FLASH_IRQHandler          ; Flash
+        DCD     RCC_IRQHandler            ; RCC
+        DCD     EXTI0_IRQHandler          ; EXTI Line 0
+        DCD     EXTI1_IRQHandler          ; EXTI Line 1
+        DCD     EXTI2_IRQHandler          ; EXTI Line 2
+        DCD     EXTI3_IRQHandler          ; EXTI Line 3
+        DCD     EXTI4_IRQHandler          ; EXTI Line 4
+        DCD     DMA1_Channel1_IRQHandler  ; DMA1 Channel 1
+        DCD     DMA1_Channel2_IRQHandler  ; DMA1 Channel 2
+        DCD     DMA1_Channel3_IRQHandler  ; DMA1 Channel 3
+        DCD     DMA1_Channel4_IRQHandler  ; DMA1 Channel 4
+        DCD     DMA1_Channel5_IRQHandler  ; DMA1 Channel 5
+        DCD     DMA1_Channel6_IRQHandler  ; DMA1 Channel 6
+        DCD     DMA1_Channel7_IRQHandler  ; DMA1 Channel 7
+        DCD     ADC1_2_IRQHandler         ; ADC1 & ADC2
+        DCD     USB_HP_CAN1_TX_IRQHandler  ; USB High Priority or CAN1 TX
+        DCD     USB_LP_CAN1_RX0_IRQHandler ; USB Low  Priority or CAN1 RX0
+        DCD     CAN1_RX1_IRQHandler       ; CAN1 RX1
+        DCD     CAN1_SCE_IRQHandler       ; CAN1 SCE
+        DCD     EXTI9_5_IRQHandler        ; EXTI Line 9..5
+        DCD     TIM1_BRK_IRQHandler       ; TIM1 Break
+        DCD     TIM1_UP_IRQHandler        ; TIM1 Update
+        DCD     TIM1_TRG_COM_IRQHandler   ; TIM1 Trigger and Commutation
+        DCD     TIM1_CC_IRQHandler        ; TIM1 Capture Compare
+        DCD     TIM2_IRQHandler           ; TIM2
+        DCD     TIM3_IRQHandler           ; TIM3
+        DCD     TIM4_IRQHandler           ; TIM4
+        DCD     I2C1_EV_IRQHandler        ; I2C1 Event
+        DCD     I2C1_ER_IRQHandler        ; I2C1 Error
+        DCD     I2C2_EV_IRQHandler        ; I2C2 Event
+        DCD     I2C2_ER_IRQHandler        ; I2C2 Error
+        DCD     SPI1_IRQHandler           ; SPI1
+        DCD     SPI2_IRQHandler           ; SPI2
+        DCD     USART1_IRQHandler         ; USART1
+        DCD     USART2_IRQHandler         ; USART2
+        DCD     USART3_IRQHandler         ; USART3
+        DCD     EXTI15_10_IRQHandler      ; EXTI Line 15..10
+        DCD     RTC_Alarm_IRQHandler       ; RTC Alarm through EXTI Line
+        DCD     USBWakeUp_IRQHandler      ; USB Wakeup from suspend
+
+;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
+;;
+;; Default interrupt handlers.
+;;
+        THUMB
+
+        PUBWEAK Reset_Handler
+        SECTION .text:CODE:REORDER:NOROOT(2)
+Reset_Handler
+        LDR     R0, =SystemInit
+        BLX     R0
+        LDR     R0, =__iar_program_start
+        BX      R0
+        
+        PUBWEAK NMI_Handler
+        SECTION .text:CODE:REORDER:NOROOT(1)
+NMI_Handler
+        B NMI_Handler
+
+        PUBWEAK HardFault_Handler
+        SECTION .text:CODE:REORDER:NOROOT(1)
+HardFault_Handler
+        B HardFault_Handler
+
+        PUBWEAK MemManage_Handler
+        SECTION .text:CODE:REORDER:NOROOT(1)
+MemManage_Handler
+        B MemManage_Handler
+
+        PUBWEAK BusFault_Handler
+        SECTION .text:CODE:REORDER:NOROOT(1)
+BusFault_Handler
+        B BusFault_Handler
+
+        PUBWEAK UsageFault_Handler
+        SECTION .text:CODE:REORDER:NOROOT(1)
+UsageFault_Handler
+        B UsageFault_Handler
+
+        PUBWEAK SVC_Handler
+        SECTION .text:CODE:REORDER:NOROOT(1)
+SVC_Handler
+        B SVC_Handler
+
+        PUBWEAK DebugMon_Handler
+        SECTION .text:CODE:REORDER:NOROOT(1)
+DebugMon_Handler
+        B DebugMon_Handler
+
+        PUBWEAK PendSV_Handler
+        SECTION .text:CODE:REORDER:NOROOT(1)
+PendSV_Handler
+        B PendSV_Handler
+
+        PUBWEAK SysTick_Handler
+        SECTION .text:CODE:REORDER:NOROOT(1)
+SysTick_Handler
+        B SysTick_Handler
+
+        PUBWEAK WWDG_IRQHandler
+        SECTION .text:CODE:REORDER:NOROOT(1)
+WWDG_IRQHandler
+        B WWDG_IRQHandler
+
+        PUBWEAK PVD_IRQHandler
+        SECTION .text:CODE:REORDER:NOROOT(1)
+PVD_IRQHandler
+        B PVD_IRQHandler
+
+        PUBWEAK TAMPER_IRQHandler
+        SECTION .text:CODE:REORDER:NOROOT(1)
+TAMPER_IRQHandler
+        B TAMPER_IRQHandler
+
+        PUBWEAK RTC_IRQHandler
+        SECTION .text:CODE:REORDER:NOROOT(1)
+RTC_IRQHandler
+        B RTC_IRQHandler
+
+        PUBWEAK FLASH_IRQHandler
+        SECTION .text:CODE:REORDER:NOROOT(1)
+FLASH_IRQHandler
+        B FLASH_IRQHandler
+
+        PUBWEAK RCC_IRQHandler
+        SECTION .text:CODE:REORDER:NOROOT(1)
+RCC_IRQHandler
+        B RCC_IRQHandler
+
+        PUBWEAK EXTI0_IRQHandler
+        SECTION .text:CODE:REORDER:NOROOT(1)
+EXTI0_IRQHandler
+        B EXTI0_IRQHandler
+
+        PUBWEAK EXTI1_IRQHandler
+        SECTION .text:CODE:REORDER:NOROOT(1)
+EXTI1_IRQHandler
+        B EXTI1_IRQHandler
+
+        PUBWEAK EXTI2_IRQHandler
+        SECTION .text:CODE:REORDER:NOROOT(1)
+EXTI2_IRQHandler
+        B EXTI2_IRQHandler
+
+        PUBWEAK EXTI3_IRQHandler
+        SECTION .text:CODE:REORDER:NOROOT(1)
+EXTI3_IRQHandler
+        B EXTI3_IRQHandler
+
+        PUBWEAK EXTI4_IRQHandler
+        SECTION .text:CODE:REORDER:NOROOT(1)
+EXTI4_IRQHandler
+        B EXTI4_IRQHandler
+
+        PUBWEAK DMA1_Channel1_IRQHandler
+        SECTION .text:CODE:REORDER:NOROOT(1)
+DMA1_Channel1_IRQHandler
+        B DMA1_Channel1_IRQHandler
+
+        PUBWEAK DMA1_Channel2_IRQHandler
+        SECTION .text:CODE:REORDER:NOROOT(1)
+DMA1_Channel2_IRQHandler
+        B DMA1_Channel2_IRQHandler
+
+        PUBWEAK DMA1_Channel3_IRQHandler
+        SECTION .text:CODE:REORDER:NOROOT(1)
+DMA1_Channel3_IRQHandler
+        B DMA1_Channel3_IRQHandler
+
+        PUBWEAK DMA1_Channel4_IRQHandler
+        SECTION .text:CODE:REORDER:NOROOT(1)
+DMA1_Channel4_IRQHandler
+        B DMA1_Channel4_IRQHandler
+
+        PUBWEAK DMA1_Channel5_IRQHandler
+        SECTION .text:CODE:REORDER:NOROOT(1)
+DMA1_Channel5_IRQHandler
+        B DMA1_Channel5_IRQHandler
+
+        PUBWEAK DMA1_Channel6_IRQHandler
+        SECTION .text:CODE:REORDER:NOROOT(1)
+DMA1_Channel6_IRQHandler
+        B DMA1_Channel6_IRQHandler
+
+        PUBWEAK DMA1_Channel7_IRQHandler
+        SECTION .text:CODE:REORDER:NOROOT(1)
+DMA1_Channel7_IRQHandler
+        B DMA1_Channel7_IRQHandler
+
+        PUBWEAK ADC1_2_IRQHandler
+        SECTION .text:CODE:REORDER:NOROOT(1)
+ADC1_2_IRQHandler
+        B ADC1_2_IRQHandler
+
+        PUBWEAK USB_HP_CAN1_TX_IRQHandler
+        SECTION .text:CODE:REORDER:NOROOT(1)
+USB_HP_CAN1_TX_IRQHandler
+        B USB_HP_CAN1_TX_IRQHandler
+
+        PUBWEAK USB_LP_CAN1_RX0_IRQHandler
+        SECTION .text:CODE:REORDER:NOROOT(1)
+USB_LP_CAN1_RX0_IRQHandler
+        B USB_LP_CAN1_RX0_IRQHandler
+
+        PUBWEAK CAN1_RX1_IRQHandler
+        SECTION .text:CODE:REORDER:NOROOT(1)
+CAN1_RX1_IRQHandler
+        B CAN1_RX1_IRQHandler
+
+        PUBWEAK CAN1_SCE_IRQHandler
+        SECTION .text:CODE:REORDER:NOROOT(1)
+CAN1_SCE_IRQHandler
+        B CAN1_SCE_IRQHandler
+
+        PUBWEAK EXTI9_5_IRQHandler
+        SECTION .text:CODE:REORDER:NOROOT(1)
+EXTI9_5_IRQHandler
+        B EXTI9_5_IRQHandler
+
+        PUBWEAK TIM1_BRK_IRQHandler
+        SECTION .text:CODE:REORDER:NOROOT(1)
+TIM1_BRK_IRQHandler
+        B TIM1_BRK_IRQHandler
+
+        PUBWEAK TIM1_UP_IRQHandler
+        SECTION .text:CODE:REORDER:NOROOT(1)
+TIM1_UP_IRQHandler
+        B TIM1_UP_IRQHandler
+
+        PUBWEAK TIM1_TRG_COM_IRQHandler
+        SECTION .text:CODE:REORDER:NOROOT(1)
+TIM1_TRG_COM_IRQHandler
+        B TIM1_TRG_COM_IRQHandler
+
+        PUBWEAK TIM1_CC_IRQHandler
+        SECTION .text:CODE:REORDER:NOROOT(1)
+TIM1_CC_IRQHandler
+        B TIM1_CC_IRQHandler
+
+        PUBWEAK TIM2_IRQHandler
+        SECTION .text:CODE:REORDER:NOROOT(1)
+TIM2_IRQHandler
+        B TIM2_IRQHandler
+
+        PUBWEAK TIM3_IRQHandler
+        SECTION .text:CODE:REORDER:NOROOT(1)
+TIM3_IRQHandler
+        B TIM3_IRQHandler
+
+        PUBWEAK TIM4_IRQHandler
+        SECTION .text:CODE:REORDER:NOROOT(1)
+TIM4_IRQHandler
+        B TIM4_IRQHandler
+
+        PUBWEAK I2C1_EV_IRQHandler
+        SECTION .text:CODE:REORDER:NOROOT(1)
+I2C1_EV_IRQHandler
+        B I2C1_EV_IRQHandler
+
+        PUBWEAK I2C1_ER_IRQHandler
+        SECTION .text:CODE:REORDER:NOROOT(1)
+I2C1_ER_IRQHandler
+        B I2C1_ER_IRQHandler
+
+        PUBWEAK I2C2_EV_IRQHandler
+        SECTION .text:CODE:REORDER:NOROOT(1)
+I2C2_EV_IRQHandler
+        B I2C2_EV_IRQHandler
+
+        PUBWEAK I2C2_ER_IRQHandler
+        SECTION .text:CODE:REORDER:NOROOT(1)
+I2C2_ER_IRQHandler
+        B I2C2_ER_IRQHandler
+
+        PUBWEAK SPI1_IRQHandler
+        SECTION .text:CODE:REORDER:NOROOT(1)
+SPI1_IRQHandler
+        B SPI1_IRQHandler
+
+        PUBWEAK SPI2_IRQHandler
+        SECTION .text:CODE:REORDER:NOROOT(1)
+SPI2_IRQHandler
+        B SPI2_IRQHandler
+
+        PUBWEAK USART1_IRQHandler
+        SECTION .text:CODE:REORDER:NOROOT(1)
+USART1_IRQHandler
+        B USART1_IRQHandler
+
+        PUBWEAK USART2_IRQHandler
+        SECTION .text:CODE:REORDER:NOROOT(1)
+USART2_IRQHandler
+        B USART2_IRQHandler
+
+        PUBWEAK USART3_IRQHandler
+        SECTION .text:CODE:REORDER:NOROOT(1)
+USART3_IRQHandler
+        B USART3_IRQHandler
+
+        PUBWEAK EXTI15_10_IRQHandler
+        SECTION .text:CODE:REORDER:NOROOT(1)
+EXTI15_10_IRQHandler
+        B EXTI15_10_IRQHandler
+
+        PUBWEAK RTC_Alarm_IRQHandler
+        SECTION .text:CODE:REORDER:NOROOT(1)
+RTC_Alarm_IRQHandler
+        B RTC_Alarm_IRQHandler
+
+        PUBWEAK USBWakeUp_IRQHandler
+        SECTION .text:CODE:REORDER:NOROOT(1)
+USBWakeUp_IRQHandler
+        B USBWakeUp_IRQHandler
+
+        END
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

bsp/stm32f10x_HAL/Libraries/CMSIS/Device/ST/STM32F1xx/Source/Templates/iar/startup_stm32f103xe.s

@@ -0,0 +1,515 @@
+;******************** (C) COPYRIGHT 2017 STMicroelectronics ********************
+;* File Name          : startup_stm32f103xe.s
+;* Author             : MCD Application Team
+;* Version            : V4.2.0
+;* Date               : 31-March-2017
+;* Description        : STM32F103xE Performance Line Devices vector table for EWARM toolchain.
+;*                      This module performs:
+;*                      - Set the initial SP
+;*                      - Set the initial PC == __iar_program_start,
+;*                      - Set the vector table entries with the exceptions ISR 
+;*                        address.
+;*                      - Configure the system clock
+;*                      - Branches to main in the C library (which eventually
+;*                        calls main()).
+;*                      After Reset the Cortex-M3 processor is in Thread mode,
+;*                      priority is Privileged, and the Stack is set to Main.
+;********************************************************************************
+;* 
+;* <h2><center>&copy; COPYRIGHT(c) 2017 STMicroelectronics</center></h2>
+;* 
+;* Redistribution and use in source and binary forms, with or without modification,
+;* are permitted provided that the following conditions are met:
+;*   1. Redistributions of source code must retain the above copyright notice,
+;*      this list of conditions and the following disclaimer.
+;*   2. Redistributions in binary form must reproduce the above copyright notice,
+;*      this list of conditions and the following disclaimer in the documentation
+;*      and/or other materials provided with the distribution.
+;*   3. Neither the name of STMicroelectronics nor the names of its contributors
+;*      may be used to endorse or promote products derived from this software
+;*      without specific prior written permission.
+;* 
+;* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+;* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+;* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+;* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+;* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+;* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+;* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+;* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+;* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+;* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+;* 
+;*******************************************************************************
+;
+;
+; The modules in this file are included in the libraries, and may be replaced
+; by any user-defined modules that define the PUBLIC symbol _program_start or
+; a user defined start symbol.
+; To override the cstartup defined in the library, simply add your modified
+; version to the workbench project.
+;
+; The vector table is normally located at address 0.
+; When debugging in RAM, it can be located in RAM, aligned to at least 2^6.
+; The name "__vector_table" has special meaning for C-SPY:
+; it is where the SP start value is found, and the NVIC vector
+; table register (VTOR) is initialized to this address if != 0.
+;
+; Cortex-M version
+;     
+  
+    MODULE  ?cstartup
+        
+        ;; Forward declaration of sections.
+        SECTION CSTACK:DATA:NOROOT(3)
+
+        SECTION .intvec:CODE:NOROOT(2)
+
+        EXTERN  __iar_program_start
+        EXTERN  SystemInit        
+        PUBLIC  __vector_table
+
+        DATA
+       
+__vector_table
+        DCD     sfe(CSTACK)
+        DCD     Reset_Handler             ; Reset Handler
+        DCD     NMI_Handler               ; NMI Handler
+        DCD     HardFault_Handler         ; Hard Fault Handler
+        DCD     MemManage_Handler         ; MPU Fault Handler
+        DCD     BusFault_Handler          ; Bus Fault Handler
+        DCD     UsageFault_Handler        ; Usage Fault Handler
+        DCD     0                         ; Reserved
+        DCD     0                         ; Reserved
+        DCD     0                         ; Reserved
+        DCD     0                         ; Reserved
+        DCD     SVC_Handler               ; SVCall Handler
+        DCD     DebugMon_Handler          ; Debug Monitor Handler
+        DCD     0                         ; Reserved
+        DCD     PendSV_Handler            ; PendSV Handler
+        DCD     SysTick_Handler           ; SysTick Handler
+
+         ; External Interrupts
+        DCD     WWDG_IRQHandler           ; Window Watchdog
+        DCD     PVD_IRQHandler            ; PVD through EXTI Line detect
+        DCD     TAMPER_IRQHandler         ; Tamper
+        DCD     RTC_IRQHandler            ; RTC
+        DCD     FLASH_IRQHandler          ; Flash
+        DCD     RCC_IRQHandler            ; RCC
+        DCD     EXTI0_IRQHandler          ; EXTI Line 0
+        DCD     EXTI1_IRQHandler          ; EXTI Line 1
+        DCD     EXTI2_IRQHandler          ; EXTI Line 2
+        DCD     EXTI3_IRQHandler          ; EXTI Line 3
+        DCD     EXTI4_IRQHandler          ; EXTI Line 4
+        DCD     DMA1_Channel1_IRQHandler  ; DMA1 Channel 1
+        DCD     DMA1_Channel2_IRQHandler  ; DMA1 Channel 2
+        DCD     DMA1_Channel3_IRQHandler  ; DMA1 Channel 3
+        DCD     DMA1_Channel4_IRQHandler  ; DMA1 Channel 4
+        DCD     DMA1_Channel5_IRQHandler  ; DMA1 Channel 5
+        DCD     DMA1_Channel6_IRQHandler  ; DMA1 Channel 6
+        DCD     DMA1_Channel7_IRQHandler  ; DMA1 Channel 7
+        DCD     ADC1_2_IRQHandler         ; ADC1 & ADC2
+        DCD     USB_HP_CAN1_TX_IRQHandler  ; USB High Priority or CAN1 TX
+        DCD     USB_LP_CAN1_RX0_IRQHandler ; USB Low  Priority or CAN1 RX0
+        DCD     CAN1_RX1_IRQHandler       ; CAN1 RX1
+        DCD     CAN1_SCE_IRQHandler       ; CAN1 SCE
+        DCD     EXTI9_5_IRQHandler        ; EXTI Line 9..5
+        DCD     TIM1_BRK_IRQHandler       ; TIM1 Break
+        DCD     TIM1_UP_IRQHandler        ; TIM1 Update
+        DCD     TIM1_TRG_COM_IRQHandler   ; TIM1 Trigger and Commutation
+        DCD     TIM1_CC_IRQHandler        ; TIM1 Capture Compare
+        DCD     TIM2_IRQHandler           ; TIM2
+        DCD     TIM3_IRQHandler           ; TIM3
+        DCD     TIM4_IRQHandler           ; TIM4
+        DCD     I2C1_EV_IRQHandler        ; I2C1 Event
+        DCD     I2C1_ER_IRQHandler        ; I2C1 Error
+        DCD     I2C2_EV_IRQHandler        ; I2C2 Event
+        DCD     I2C2_ER_IRQHandler        ; I2C2 Error
+        DCD     SPI1_IRQHandler           ; SPI1
+        DCD     SPI2_IRQHandler           ; SPI2
+        DCD     USART1_IRQHandler         ; USART1
+        DCD     USART2_IRQHandler         ; USART2
+        DCD     USART3_IRQHandler         ; USART3
+        DCD     EXTI15_10_IRQHandler      ; EXTI Line 15..10
+        DCD     RTC_Alarm_IRQHandler       ; RTC Alarm through EXTI Line
+        DCD     USBWakeUp_IRQHandler      ; USB Wakeup from suspend
+        DCD     TIM8_BRK_IRQHandler       ; TIM8 Break
+        DCD     TIM8_UP_IRQHandler        ; TIM8 Update
+        DCD     TIM8_TRG_COM_IRQHandler   ; TIM8 Trigger and Commutation
+        DCD     TIM8_CC_IRQHandler        ; TIM8 Capture Compare
+        DCD     ADC3_IRQHandler           ; ADC3
+        DCD     FSMC_IRQHandler           ; FSMC
+        DCD     SDIO_IRQHandler           ; SDIO
+        DCD     TIM5_IRQHandler           ; TIM5
+        DCD     SPI3_IRQHandler           ; SPI3
+        DCD     UART4_IRQHandler          ; UART4
+        DCD     UART5_IRQHandler          ; UART5
+        DCD     TIM6_IRQHandler           ; TIM6
+        DCD     TIM7_IRQHandler           ; TIM7
+        DCD     DMA2_Channel1_IRQHandler  ; DMA2 Channel1
+        DCD     DMA2_Channel2_IRQHandler  ; DMA2 Channel2
+        DCD     DMA2_Channel3_IRQHandler  ; DMA2 Channel3
+        DCD     DMA2_Channel4_5_IRQHandler ; DMA2 Channel4 & Channel5
+;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
+;;
+;; Default interrupt handlers.
+;;
+        THUMB
+
+        PUBWEAK Reset_Handler
+        SECTION .text:CODE:REORDER:NOROOT(2)
+Reset_Handler
+        LDR     R0, =SystemInit
+        BLX     R0
+        LDR     R0, =__iar_program_start
+        BX      R0
+               
+        PUBWEAK NMI_Handler
+        SECTION .text:CODE:REORDER:NOROOT(1)
+NMI_Handler
+        B NMI_Handler
+
+        PUBWEAK HardFault_Handler
+        SECTION .text:CODE:REORDER:NOROOT(1)
+HardFault_Handler
+        B HardFault_Handler
+
+        PUBWEAK MemManage_Handler
+        SECTION .text:CODE:REORDER:NOROOT(1)
+MemManage_Handler
+        B MemManage_Handler
+
+        PUBWEAK BusFault_Handler
+        SECTION .text:CODE:REORDER:NOROOT(1)
+BusFault_Handler
+        B BusFault_Handler
+
+        PUBWEAK UsageFault_Handler
+        SECTION .text:CODE:REORDER:NOROOT(1)
+UsageFault_Handler
+        B UsageFault_Handler
+
+        PUBWEAK SVC_Handler
+        SECTION .text:CODE:REORDER:NOROOT(1)
+SVC_Handler
+        B SVC_Handler
+
+        PUBWEAK DebugMon_Handler
+        SECTION .text:CODE:REORDER:NOROOT(1)
+DebugMon_Handler
+        B DebugMon_Handler
+
+        PUBWEAK PendSV_Handler
+        SECTION .text:CODE:REORDER:NOROOT(1)
+PendSV_Handler
+        B PendSV_Handler
+
+        PUBWEAK SysTick_Handler
+        SECTION .text:CODE:REORDER:NOROOT(1)
+SysTick_Handler
+        B SysTick_Handler
+
+        PUBWEAK WWDG_IRQHandler
+        SECTION .text:CODE:REORDER:NOROOT(1)
+WWDG_IRQHandler
+        B WWDG_IRQHandler
+
+        PUBWEAK PVD_IRQHandler
+        SECTION .text:CODE:REORDER:NOROOT(1)
+PVD_IRQHandler
+        B PVD_IRQHandler
+
+        PUBWEAK TAMPER_IRQHandler
+        SECTION .text:CODE:REORDER:NOROOT(1)
+TAMPER_IRQHandler
+        B TAMPER_IRQHandler
+
+        PUBWEAK RTC_IRQHandler
+        SECTION .text:CODE:REORDER:NOROOT(1)
+RTC_IRQHandler
+        B RTC_IRQHandler
+
+        PUBWEAK FLASH_IRQHandler
+        SECTION .text:CODE:REORDER:NOROOT(1)
+FLASH_IRQHandler
+        B FLASH_IRQHandler
+
+        PUBWEAK RCC_IRQHandler
+        SECTION .text:CODE:REORDER:NOROOT(1)
+RCC_IRQHandler
+        B RCC_IRQHandler
+
+        PUBWEAK EXTI0_IRQHandler
+        SECTION .text:CODE:REORDER:NOROOT(1)
+EXTI0_IRQHandler
+        B EXTI0_IRQHandler
+
+        PUBWEAK EXTI1_IRQHandler
+        SECTION .text:CODE:REORDER:NOROOT(1)
+EXTI1_IRQHandler
+        B EXTI1_IRQHandler
+
+        PUBWEAK EXTI2_IRQHandler
+        SECTION .text:CODE:REORDER:NOROOT(1)
+EXTI2_IRQHandler
+        B EXTI2_IRQHandler
+
+        PUBWEAK EXTI3_IRQHandler
+        SECTION .text:CODE:REORDER:NOROOT(1)
+EXTI3_IRQHandler
+        B EXTI3_IRQHandler
+
+        PUBWEAK EXTI4_IRQHandler
+        SECTION .text:CODE:REORDER:NOROOT(1)
+EXTI4_IRQHandler
+        B EXTI4_IRQHandler
+
+        PUBWEAK DMA1_Channel1_IRQHandler
+        SECTION .text:CODE:REORDER:NOROOT(1)
+DMA1_Channel1_IRQHandler
+        B DMA1_Channel1_IRQHandler
+
+        PUBWEAK DMA1_Channel2_IRQHandler
+        SECTION .text:CODE:REORDER:NOROOT(1)
+DMA1_Channel2_IRQHandler
+        B DMA1_Channel2_IRQHandler
+
+        PUBWEAK DMA1_Channel3_IRQHandler
+        SECTION .text:CODE:REORDER:NOROOT(1)
+DMA1_Channel3_IRQHandler
+        B DMA1_Channel3_IRQHandler
+
+        PUBWEAK DMA1_Channel4_IRQHandler
+        SECTION .text:CODE:REORDER:NOROOT(1)
+DMA1_Channel4_IRQHandler
+        B DMA1_Channel4_IRQHandler
+
+        PUBWEAK DMA1_Channel5_IRQHandler
+        SECTION .text:CODE:REORDER:NOROOT(1)
+DMA1_Channel5_IRQHandler
+        B DMA1_Channel5_IRQHandler
+
+        PUBWEAK DMA1_Channel6_IRQHandler
+        SECTION .text:CODE:REORDER:NOROOT(1)
+DMA1_Channel6_IRQHandler
+        B DMA1_Channel6_IRQHandler
+
+        PUBWEAK DMA1_Channel7_IRQHandler
+        SECTION .text:CODE:REORDER:NOROOT(1)
+DMA1_Channel7_IRQHandler
+        B DMA1_Channel7_IRQHandler
+
+        PUBWEAK ADC1_2_IRQHandler
+        SECTION .text:CODE:REORDER:NOROOT(1)
+ADC1_2_IRQHandler
+        B ADC1_2_IRQHandler
+
+        PUBWEAK USB_HP_CAN1_TX_IRQHandler
+        SECTION .text:CODE:REORDER:NOROOT(1)
+USB_HP_CAN1_TX_IRQHandler
+        B USB_HP_CAN1_TX_IRQHandler
+
+        PUBWEAK USB_LP_CAN1_RX0_IRQHandler
+        SECTION .text:CODE:REORDER:NOROOT(1)
+USB_LP_CAN1_RX0_IRQHandler
+        B USB_LP_CAN1_RX0_IRQHandler
+
+        PUBWEAK CAN1_RX1_IRQHandler
+        SECTION .text:CODE:REORDER:NOROOT(1)
+CAN1_RX1_IRQHandler
+        B CAN1_RX1_IRQHandler
+
+        PUBWEAK CAN1_SCE_IRQHandler
+        SECTION .text:CODE:REORDER:NOROOT(1)
+CAN1_SCE_IRQHandler
+        B CAN1_SCE_IRQHandler
+
+        PUBWEAK EXTI9_5_IRQHandler
+        SECTION .text:CODE:REORDER:NOROOT(1)
+EXTI9_5_IRQHandler
+        B EXTI9_5_IRQHandler
+
+        PUBWEAK TIM1_BRK_IRQHandler
+        SECTION .text:CODE:REORDER:NOROOT(1)
+TIM1_BRK_IRQHandler
+        B TIM1_BRK_IRQHandler
+
+        PUBWEAK TIM1_UP_IRQHandler
+        SECTION .text:CODE:REORDER:NOROOT(1)
+TIM1_UP_IRQHandler
+        B TIM1_UP_IRQHandler
+
+        PUBWEAK TIM1_TRG_COM_IRQHandler
+        SECTION .text:CODE:REORDER:NOROOT(1)
+TIM1_TRG_COM_IRQHandler
+        B TIM1_TRG_COM_IRQHandler
+
+        PUBWEAK TIM1_CC_IRQHandler
+        SECTION .text:CODE:REORDER:NOROOT(1)
+TIM1_CC_IRQHandler
+        B TIM1_CC_IRQHandler
+
+        PUBWEAK TIM2_IRQHandler
+        SECTION .text:CODE:REORDER:NOROOT(1)
+TIM2_IRQHandler
+        B TIM2_IRQHandler
+
+        PUBWEAK TIM3_IRQHandler
+        SECTION .text:CODE:REORDER:NOROOT(1)
+TIM3_IRQHandler
+        B TIM3_IRQHandler
+
+        PUBWEAK TIM4_IRQHandler
+        SECTION .text:CODE:REORDER:NOROOT(1)
+TIM4_IRQHandler
+        B TIM4_IRQHandler
+
+        PUBWEAK I2C1_EV_IRQHandler
+        SECTION .text:CODE:REORDER:NOROOT(1)
+I2C1_EV_IRQHandler
+        B I2C1_EV_IRQHandler
+
+        PUBWEAK I2C1_ER_IRQHandler
+        SECTION .text:CODE:REORDER:NOROOT(1)
+I2C1_ER_IRQHandler
+        B I2C1_ER_IRQHandler
+
+        PUBWEAK I2C2_EV_IRQHandler
+        SECTION .text:CODE:REORDER:NOROOT(1)
+I2C2_EV_IRQHandler
+        B I2C2_EV_IRQHandler
+
+        PUBWEAK I2C2_ER_IRQHandler
+        SECTION .text:CODE:REORDER:NOROOT(1)
+I2C2_ER_IRQHandler
+        B I2C2_ER_IRQHandler
+
+        PUBWEAK SPI1_IRQHandler
+        SECTION .text:CODE:REORDER:NOROOT(1)
+SPI1_IRQHandler
+        B SPI1_IRQHandler
+
+        PUBWEAK SPI2_IRQHandler
+        SECTION .text:CODE:REORDER:NOROOT(1)
+SPI2_IRQHandler
+        B SPI2_IRQHandler
+
+        PUBWEAK USART1_IRQHandler
+        SECTION .text:CODE:REORDER:NOROOT(1)
+USART1_IRQHandler
+        B USART1_IRQHandler
+
+        PUBWEAK USART2_IRQHandler
+        SECTION .text:CODE:REORDER:NOROOT(1)
+USART2_IRQHandler
+        B USART2_IRQHandler
+
+        PUBWEAK USART3_IRQHandler
+        SECTION .text:CODE:REORDER:NOROOT(1)
+USART3_IRQHandler
+        B USART3_IRQHandler
+
+        PUBWEAK EXTI15_10_IRQHandler
+        SECTION .text:CODE:REORDER:NOROOT(1)
+EXTI15_10_IRQHandler
+        B EXTI15_10_IRQHandler
+
+        PUBWEAK RTC_Alarm_IRQHandler
+        SECTION .text:CODE:REORDER:NOROOT(1)
+RTC_Alarm_IRQHandler
+        B RTC_Alarm_IRQHandler
+
+        PUBWEAK USBWakeUp_IRQHandler
+        SECTION .text:CODE:REORDER:NOROOT(1)
+USBWakeUp_IRQHandler
+        B USBWakeUp_IRQHandler
+
+        PUBWEAK TIM8_BRK_IRQHandler
+        SECTION .text:CODE:REORDER:NOROOT(1)
+TIM8_BRK_IRQHandler
+        B TIM8_BRK_IRQHandler
+
+        PUBWEAK TIM8_UP_IRQHandler
+        SECTION .text:CODE:REORDER:NOROOT(1)
+TIM8_UP_IRQHandler
+        B TIM8_UP_IRQHandler
+
+        PUBWEAK TIM8_TRG_COM_IRQHandler
+        SECTION .text:CODE:REORDER:NOROOT(1)
+TIM8_TRG_COM_IRQHandler
+        B TIM8_TRG_COM_IRQHandler
+
+        PUBWEAK TIM8_CC_IRQHandler
+        SECTION .text:CODE:REORDER:NOROOT(1)
+TIM8_CC_IRQHandler
+        B TIM8_CC_IRQHandler
+
+        PUBWEAK ADC3_IRQHandler
+        SECTION .text:CODE:REORDER:NOROOT(1)
+ADC3_IRQHandler
+        B ADC3_IRQHandler
+
+        PUBWEAK FSMC_IRQHandler
+        SECTION .text:CODE:REORDER:NOROOT(1)
+FSMC_IRQHandler
+        B FSMC_IRQHandler
+
+        PUBWEAK SDIO_IRQHandler
+        SECTION .text:CODE:REORDER:NOROOT(1)
+SDIO_IRQHandler
+        B SDIO_IRQHandler
+
+        PUBWEAK TIM5_IRQHandler
+        SECTION .text:CODE:REORDER:NOROOT(1)
+TIM5_IRQHandler
+        B TIM5_IRQHandler
+
+        PUBWEAK SPI3_IRQHandler
+        SECTION .text:CODE:REORDER:NOROOT(1)
+SPI3_IRQHandler
+        B SPI3_IRQHandler
+
+        PUBWEAK UART4_IRQHandler
+        SECTION .text:CODE:REORDER:NOROOT(1)
+UART4_IRQHandler
+        B UART4_IRQHandler
+
+        PUBWEAK UART5_IRQHandler
+        SECTION .text:CODE:REORDER:NOROOT(1)
+UART5_IRQHandler
+        B UART5_IRQHandler
+
+        PUBWEAK TIM6_IRQHandler
+        SECTION .text:CODE:REORDER:NOROOT(1)
+TIM6_IRQHandler
+        B TIM6_IRQHandler
+
+        PUBWEAK TIM7_IRQHandler
+        SECTION .text:CODE:REORDER:NOROOT(1)
+TIM7_IRQHandler
+        B TIM7_IRQHandler
+
+        PUBWEAK DMA2_Channel1_IRQHandler
+        SECTION .text:CODE:REORDER:NOROOT(1)
+DMA2_Channel1_IRQHandler
+        B DMA2_Channel1_IRQHandler
+
+        PUBWEAK DMA2_Channel2_IRQHandler
+        SECTION .text:CODE:REORDER:NOROOT(1)
+DMA2_Channel2_IRQHandler
+        B DMA2_Channel2_IRQHandler
+
+        PUBWEAK DMA2_Channel3_IRQHandler
+        SECTION .text:CODE:REORDER:NOROOT(1)
+DMA2_Channel3_IRQHandler
+        B DMA2_Channel3_IRQHandler
+
+        PUBWEAK DMA2_Channel4_5_IRQHandler
+        SECTION .text:CODE:REORDER:NOROOT(1)
+DMA2_Channel4_5_IRQHandler
+        B DMA2_Channel4_5_IRQHandler
+        
+        
+        END
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

bsp/stm32f10x_HAL/Libraries/CMSIS/Device/ST/STM32F1xx/Source/Templates/iar/startup_stm32f103xg.s

@@ -0,0 +1,512 @@
+;******************** (C) COPYRIGHT 2017 STMicroelectronics ********************
+;* File Name          : startup_stm32f103xg.s
+;* Author             : MCD Application Team
+;* Version            : V4.2.0
+;* Date               : 31-March-2017
+;* Description        : STM32F103xG Performances Line Devices vector table for EWARM 
+;*                      toolchain.
+;*                      This module performs:
+;*                      - Set the initial SP
+;*                      - Set the initial PC == __iar_program_start,
+;*                      - Set the vector table entries with the exceptions ISR address,
+;*                      After Reset the Cortex-M3 processor is in Thread mode,
+;*                      priority is Privileged, and the Stack is set to Main.
+;********************************************************************************
+;* 
+;* <h2><center>&copy; COPYRIGHT(c) 2017 STMicroelectronics</center></h2>
+;* 
+;* Redistribution and use in source and binary forms, with or without modification,
+;* are permitted provided that the following conditions are met:
+;*   1. Redistributions of source code must retain the above copyright notice,
+;*      this list of conditions and the following disclaimer.
+;*   2. Redistributions in binary form must reproduce the above copyright notice,
+;*      this list of conditions and the following disclaimer in the documentation
+;*      and/or other materials provided with the distribution.
+;*   3. Neither the name of STMicroelectronics nor the names of its contributors
+;*      may be used to endorse or promote products derived from this software
+;*      without specific prior written permission.
+;* 
+;* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+;* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+;* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+;* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+;* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+;* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+;* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+;* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+;* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+;* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+;* 
+;*******************************************************************************
+;
+;
+; The modules in this file are included in the libraries, and may be replaced
+; by any user-defined modules that define the PUBLIC symbol _program_start or
+; a user defined start symbol.
+; To override the cstartup defined in the library, simply add your modified
+; version to the workbench project.
+;
+; The vector table is normally located at address 0.
+; When debugging in RAM, it can be located in RAM, aligned to at least 2^6.
+; The name "__vector_table" has special meaning for C-SPY:
+; it is where the SP start value is found, and the NVIC vector
+; table register (VTOR) is initialized to this address if != 0.
+;
+; Cortex-M version
+;     
+  
+    MODULE  ?cstartup
+        
+        ;; Forward declaration of sections.
+        SECTION CSTACK:DATA:NOROOT(3)
+
+        SECTION .intvec:CODE:NOROOT(2)
+
+        EXTERN  __iar_program_start
+        EXTERN  SystemInit        
+        PUBLIC  __vector_table
+
+        DATA
+       
+__vector_table
+        DCD     sfe(CSTACK)
+        DCD     Reset_Handler             ; Reset Handler
+        DCD     NMI_Handler               ; NMI Handler
+        DCD     HardFault_Handler         ; Hard Fault Handler
+        DCD     MemManage_Handler         ; MPU Fault Handler
+        DCD     BusFault_Handler          ; Bus Fault Handler
+        DCD     UsageFault_Handler        ; Usage Fault Handler
+        DCD     0                         ; Reserved
+        DCD     0                         ; Reserved
+        DCD     0                         ; Reserved
+        DCD     0                         ; Reserved
+        DCD     SVC_Handler               ; SVCall Handler
+        DCD     DebugMon_Handler          ; Debug Monitor Handler
+        DCD     0                         ; Reserved
+        DCD     PendSV_Handler            ; PendSV Handler
+        DCD     SysTick_Handler           ; SysTick Handler
+
+         ; External Interrupts
+        DCD     WWDG_IRQHandler               ; Window Watchdog
+        DCD     PVD_IRQHandler                ; PVD through EXTI Line detect
+        DCD     TAMPER_IRQHandler             ; Tamper
+        DCD     RTC_IRQHandler                ; RTC
+        DCD     FLASH_IRQHandler              ; Flash
+        DCD     RCC_IRQHandler                ; RCC
+        DCD     EXTI0_IRQHandler              ; EXTI Line 0
+        DCD     EXTI1_IRQHandler              ; EXTI Line 1
+        DCD     EXTI2_IRQHandler              ; EXTI Line 2
+        DCD     EXTI3_IRQHandler              ; EXTI Line 3
+        DCD     EXTI4_IRQHandler              ; EXTI Line 4
+        DCD     DMA1_Channel1_IRQHandler      ; DMA1 Channel 1
+        DCD     DMA1_Channel2_IRQHandler      ; DMA1 Channel 2
+        DCD     DMA1_Channel3_IRQHandler      ; DMA1 Channel 3
+        DCD     DMA1_Channel4_IRQHandler      ; DMA1 Channel 4
+        DCD     DMA1_Channel5_IRQHandler      ; DMA1 Channel 5
+        DCD     DMA1_Channel6_IRQHandler      ; DMA1 Channel 6
+        DCD     DMA1_Channel7_IRQHandler      ; DMA1 Channel 7
+        DCD     ADC1_2_IRQHandler             ; ADC1 & ADC2
+        DCD     USB_HP_CAN1_TX_IRQHandler     ; USB High Priority or CAN1 TX
+        DCD     USB_LP_CAN1_RX0_IRQHandler    ; USB Low  Priority or CAN1 RX0
+        DCD     CAN1_RX1_IRQHandler           ; CAN1 RX1
+        DCD     CAN1_SCE_IRQHandler           ; CAN1 SCE
+        DCD     EXTI9_5_IRQHandler            ; EXTI Line 9..5
+        DCD     TIM1_BRK_TIM9_IRQHandler      ; TIM1 Break and TIM9
+        DCD     TIM1_UP_TIM10_IRQHandler      ; TIM1 Update and TIM10
+        DCD     TIM1_TRG_COM_TIM11_IRQHandler ; TIM1 Trigger and Commutation and TIM11
+        DCD     TIM1_CC_IRQHandler            ; TIM1 Capture Compare
+        DCD     TIM2_IRQHandler               ; TIM2
+        DCD     TIM3_IRQHandler               ; TIM3
+        DCD     TIM4_IRQHandler               ; TIM4
+        DCD     I2C1_EV_IRQHandler            ; I2C1 Event
+        DCD     I2C1_ER_IRQHandler            ; I2C1 Error
+        DCD     I2C2_EV_IRQHandler            ; I2C2 Event
+        DCD     I2C2_ER_IRQHandler            ; I2C2 Error
+        DCD     SPI1_IRQHandler               ; SPI1
+        DCD     SPI2_IRQHandler               ; SPI2
+        DCD     USART1_IRQHandler             ; USART1
+        DCD     USART2_IRQHandler             ; USART2
+        DCD     USART3_IRQHandler             ; USART3
+        DCD     EXTI15_10_IRQHandler          ; EXTI Line 15..10
+        DCD     RTC_Alarm_IRQHandler           ; RTC Alarm through EXTI Line
+        DCD     USBWakeUp_IRQHandler          ; USB Wakeup from suspend
+        DCD     TIM8_BRK_TIM12_IRQHandler     ; TIM8 Break and TIM12
+        DCD     TIM8_UP_TIM13_IRQHandler      ; TIM8 Update and TIM13
+        DCD     TIM8_TRG_COM_TIM14_IRQHandler ; TIM8 Trigger and Commutation and TIM14
+        DCD     TIM8_CC_IRQHandler            ; TIM8 Capture Compare
+        DCD     ADC3_IRQHandler               ; ADC3
+        DCD     FSMC_IRQHandler               ; FSMC
+        DCD     SDIO_IRQHandler               ; SDIO
+        DCD     TIM5_IRQHandler               ; TIM5
+        DCD     SPI3_IRQHandler               ; SPI3
+        DCD     UART4_IRQHandler              ; UART4
+        DCD     UART5_IRQHandler              ; UART5
+        DCD     TIM6_IRQHandler               ; TIM6
+        DCD     TIM7_IRQHandler               ; TIM7
+        DCD     DMA2_Channel1_IRQHandler      ; DMA2 Channel1
+        DCD     DMA2_Channel2_IRQHandler      ; DMA2 Channel2
+        DCD     DMA2_Channel3_IRQHandler      ; DMA2 Channel3
+        DCD     DMA2_Channel4_5_IRQHandler    ; DMA2 Channel4 & Channel5
+;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
+;;
+;; Default interrupt handlers.
+;;
+        THUMB
+
+        PUBWEAK Reset_Handler
+        SECTION .text:CODE:REORDER:NOROOT(2)
+Reset_Handler
+        LDR     R0, =SystemInit
+        BLX     R0
+        LDR     R0, =__iar_program_start
+        BX      R0
+               
+        PUBWEAK NMI_Handler
+        SECTION .text:CODE:REORDER:NOROOT(1)
+NMI_Handler
+        B NMI_Handler
+
+        PUBWEAK HardFault_Handler
+        SECTION .text:CODE:REORDER:NOROOT(1)
+HardFault_Handler
+        B HardFault_Handler
+
+        PUBWEAK MemManage_Handler
+        SECTION .text:CODE:REORDER:NOROOT(1)
+MemManage_Handler
+        B MemManage_Handler
+
+        PUBWEAK BusFault_Handler
+        SECTION .text:CODE:REORDER:NOROOT(1)
+BusFault_Handler
+        B BusFault_Handler
+
+        PUBWEAK UsageFault_Handler
+        SECTION .text:CODE:REORDER:NOROOT(1)
+UsageFault_Handler
+        B UsageFault_Handler
+
+        PUBWEAK SVC_Handler
+        SECTION .text:CODE:REORDER:NOROOT(1)
+SVC_Handler
+        B SVC_Handler
+
+        PUBWEAK DebugMon_Handler
+        SECTION .text:CODE:REORDER:NOROOT(1)
+DebugMon_Handler
+        B DebugMon_Handler
+
+        PUBWEAK PendSV_Handler
+        SECTION .text:CODE:REORDER:NOROOT(1)
+PendSV_Handler
+        B PendSV_Handler
+
+        PUBWEAK SysTick_Handler
+        SECTION .text:CODE:REORDER:NOROOT(1)
+SysTick_Handler
+        B SysTick_Handler
+
+        PUBWEAK WWDG_IRQHandler
+        SECTION .text:CODE:REORDER:NOROOT(1)
+WWDG_IRQHandler
+        B WWDG_IRQHandler
+
+        PUBWEAK PVD_IRQHandler
+        SECTION .text:CODE:REORDER:NOROOT(1)
+PVD_IRQHandler
+        B PVD_IRQHandler
+
+        PUBWEAK TAMPER_IRQHandler
+        SECTION .text:CODE:REORDER:NOROOT(1)
+TAMPER_IRQHandler
+        B TAMPER_IRQHandler
+
+        PUBWEAK RTC_IRQHandler
+        SECTION .text:CODE:REORDER:NOROOT(1)
+RTC_IRQHandler
+        B RTC_IRQHandler
+
+        PUBWEAK FLASH_IRQHandler
+        SECTION .text:CODE:REORDER:NOROOT(1)
+FLASH_IRQHandler
+        B FLASH_IRQHandler
+
+        PUBWEAK RCC_IRQHandler
+        SECTION .text:CODE:REORDER:NOROOT(1)
+RCC_IRQHandler
+        B RCC_IRQHandler
+
+        PUBWEAK EXTI0_IRQHandler
+        SECTION .text:CODE:REORDER:NOROOT(1)
+EXTI0_IRQHandler
+        B EXTI0_IRQHandler
+
+        PUBWEAK EXTI1_IRQHandler
+        SECTION .text:CODE:REORDER:NOROOT(1)
+EXTI1_IRQHandler
+        B EXTI1_IRQHandler
+
+        PUBWEAK EXTI2_IRQHandler
+        SECTION .text:CODE:REORDER:NOROOT(1)
+EXTI2_IRQHandler
+        B EXTI2_IRQHandler
+
+        PUBWEAK EXTI3_IRQHandler
+        SECTION .text:CODE:REORDER:NOROOT(1)
+EXTI3_IRQHandler
+        B EXTI3_IRQHandler
+
+        PUBWEAK EXTI4_IRQHandler
+        SECTION .text:CODE:REORDER:NOROOT(1)
+EXTI4_IRQHandler
+        B EXTI4_IRQHandler
+
+        PUBWEAK DMA1_Channel1_IRQHandler
+        SECTION .text:CODE:REORDER:NOROOT(1)
+DMA1_Channel1_IRQHandler
+        B DMA1_Channel1_IRQHandler
+
+        PUBWEAK DMA1_Channel2_IRQHandler
+        SECTION .text:CODE:REORDER:NOROOT(1)
+DMA1_Channel2_IRQHandler
+        B DMA1_Channel2_IRQHandler
+
+        PUBWEAK DMA1_Channel3_IRQHandler
+        SECTION .text:CODE:REORDER:NOROOT(1)
+DMA1_Channel3_IRQHandler
+        B DMA1_Channel3_IRQHandler
+
+        PUBWEAK DMA1_Channel4_IRQHandler
+        SECTION .text:CODE:REORDER:NOROOT(1)
+DMA1_Channel4_IRQHandler
+        B DMA1_Channel4_IRQHandler
+
+        PUBWEAK DMA1_Channel5_IRQHandler
+        SECTION .text:CODE:REORDER:NOROOT(1)
+DMA1_Channel5_IRQHandler
+        B DMA1_Channel5_IRQHandler
+
+        PUBWEAK DMA1_Channel6_IRQHandler
+        SECTION .text:CODE:REORDER:NOROOT(1)
+DMA1_Channel6_IRQHandler
+        B DMA1_Channel6_IRQHandler
+
+        PUBWEAK DMA1_Channel7_IRQHandler
+        SECTION .text:CODE:REORDER:NOROOT(1)
+DMA1_Channel7_IRQHandler
+        B DMA1_Channel7_IRQHandler
+
+        PUBWEAK ADC1_2_IRQHandler
+        SECTION .text:CODE:REORDER:NOROOT(1)
+ADC1_2_IRQHandler
+        B ADC1_2_IRQHandler
+
+        PUBWEAK USB_HP_CAN1_TX_IRQHandler
+        SECTION .text:CODE:REORDER:NOROOT(1)
+USB_HP_CAN1_TX_IRQHandler
+        B USB_HP_CAN1_TX_IRQHandler
+
+        PUBWEAK USB_LP_CAN1_RX0_IRQHandler
+        SECTION .text:CODE:REORDER:NOROOT(1)
+USB_LP_CAN1_RX0_IRQHandler
+        B USB_LP_CAN1_RX0_IRQHandler
+
+        PUBWEAK CAN1_RX1_IRQHandler
+        SECTION .text:CODE:REORDER:NOROOT(1)
+CAN1_RX1_IRQHandler
+        B CAN1_RX1_IRQHandler
+
+        PUBWEAK CAN1_SCE_IRQHandler
+        SECTION .text:CODE:REORDER:NOROOT(1)
+CAN1_SCE_IRQHandler
+        B CAN1_SCE_IRQHandler
+
+        PUBWEAK EXTI9_5_IRQHandler
+        SECTION .text:CODE:REORDER:NOROOT(1)
+EXTI9_5_IRQHandler
+        B EXTI9_5_IRQHandler
+
+        PUBWEAK TIM1_BRK_TIM9_IRQHandler
+        SECTION .text:CODE:REORDER:NOROOT(1)
+TIM1_BRK_TIM9_IRQHandler
+        B TIM1_BRK_TIM9_IRQHandler
+
+        PUBWEAK TIM1_UP_TIM10_IRQHandler
+        SECTION .text:CODE:REORDER:NOROOT(1)
+TIM1_UP_TIM10_IRQHandler
+        B TIM1_UP_TIM10_IRQHandler
+
+        PUBWEAK TIM1_TRG_COM_TIM11_IRQHandler
+        SECTION .text:CODE:REORDER:NOROOT(1)
+TIM1_TRG_COM_TIM11_IRQHandler
+        B TIM1_TRG_COM_TIM11_IRQHandler
+
+        PUBWEAK TIM1_CC_IRQHandler
+        SECTION .text:CODE:REORDER:NOROOT(1)
+TIM1_CC_IRQHandler
+        B TIM1_CC_IRQHandler
+
+        PUBWEAK TIM2_IRQHandler
+        SECTION .text:CODE:REORDER:NOROOT(1)
+TIM2_IRQHandler
+        B TIM2_IRQHandler
+
+        PUBWEAK TIM3_IRQHandler
+        SECTION .text:CODE:REORDER:NOROOT(1)
+TIM3_IRQHandler
+        B TIM3_IRQHandler
+
+        PUBWEAK TIM4_IRQHandler
+        SECTION .text:CODE:REORDER:NOROOT(1)
+TIM4_IRQHandler
+        B TIM4_IRQHandler
+
+        PUBWEAK I2C1_EV_IRQHandler
+        SECTION .text:CODE:REORDER:NOROOT(1)
+I2C1_EV_IRQHandler
+        B I2C1_EV_IRQHandler
+
+        PUBWEAK I2C1_ER_IRQHandler
+        SECTION .text:CODE:REORDER:NOROOT(1)
+I2C1_ER_IRQHandler
+        B I2C1_ER_IRQHandler
+
+        PUBWEAK I2C2_EV_IRQHandler
+        SECTION .text:CODE:REORDER:NOROOT(1)
+I2C2_EV_IRQHandler
+        B I2C2_EV_IRQHandler
+
+        PUBWEAK I2C2_ER_IRQHandler
+        SECTION .text:CODE:REORDER:NOROOT(1)
+I2C2_ER_IRQHandler
+        B I2C2_ER_IRQHandler
+
+        PUBWEAK SPI1_IRQHandler
+        SECTION .text:CODE:REORDER:NOROOT(1)
+SPI1_IRQHandler
+        B SPI1_IRQHandler
+
+        PUBWEAK SPI2_IRQHandler
+        SECTION .text:CODE:REORDER:NOROOT(1)
+SPI2_IRQHandler
+        B SPI2_IRQHandler
+
+        PUBWEAK USART1_IRQHandler
+        SECTION .text:CODE:REORDER:NOROOT(1)
+USART1_IRQHandler
+        B USART1_IRQHandler
+
+        PUBWEAK USART2_IRQHandler
+        SECTION .text:CODE:REORDER:NOROOT(1)
+USART2_IRQHandler
+        B USART2_IRQHandler
+
+        PUBWEAK USART3_IRQHandler
+        SECTION .text:CODE:REORDER:NOROOT(1)
+USART3_IRQHandler
+        B USART3_IRQHandler
+
+        PUBWEAK EXTI15_10_IRQHandler
+        SECTION .text:CODE:REORDER:NOROOT(1)
+EXTI15_10_IRQHandler
+        B EXTI15_10_IRQHandler
+
+        PUBWEAK RTC_Alarm_IRQHandler
+        SECTION .text:CODE:REORDER:NOROOT(1)
+RTC_Alarm_IRQHandler
+        B RTC_Alarm_IRQHandler
+
+        PUBWEAK USBWakeUp_IRQHandler
+        SECTION .text:CODE:REORDER:NOROOT(1)
+USBWakeUp_IRQHandler
+        B USBWakeUp_IRQHandler
+
+        PUBWEAK TIM8_BRK_TIM12_IRQHandler
+        SECTION .text:CODE:REORDER:NOROOT(1)
+TIM8_BRK_TIM12_IRQHandler
+        B TIM8_BRK_TIM12_IRQHandler
+
+        PUBWEAK TIM8_UP_TIM13_IRQHandler
+        SECTION .text:CODE:REORDER:NOROOT(1)
+TIM8_UP_TIM13_IRQHandler
+        B TIM8_UP_TIM13_IRQHandler
+
+        PUBWEAK TIM8_TRG_COM_TIM14_IRQHandler
+        SECTION .text:CODE:REORDER:NOROOT(1)
+TIM8_TRG_COM_TIM14_IRQHandler
+        B TIM8_TRG_COM_TIM14_IRQHandler
+
+        PUBWEAK TIM8_CC_IRQHandler
+        SECTION .text:CODE:REORDER:NOROOT(1)
+TIM8_CC_IRQHandler
+        B TIM8_CC_IRQHandler
+
+        PUBWEAK ADC3_IRQHandler
+        SECTION .text:CODE:REORDER:NOROOT(1)
+ADC3_IRQHandler
+        B ADC3_IRQHandler
+
+        PUBWEAK FSMC_IRQHandler
+        SECTION .text:CODE:REORDER:NOROOT(1)
+FSMC_IRQHandler
+        B FSMC_IRQHandler
+
+        PUBWEAK SDIO_IRQHandler
+        SECTION .text:CODE:REORDER:NOROOT(1)
+SDIO_IRQHandler
+        B SDIO_IRQHandler
+
+        PUBWEAK TIM5_IRQHandler
+        SECTION .text:CODE:REORDER:NOROOT(1)
+TIM5_IRQHandler
+        B TIM5_IRQHandler
+
+        PUBWEAK SPI3_IRQHandler
+        SECTION .text:CODE:REORDER:NOROOT(1)
+SPI3_IRQHandler
+        B SPI3_IRQHandler
+
+        PUBWEAK UART4_IRQHandler
+        SECTION .text:CODE:REORDER:NOROOT(1)
+UART4_IRQHandler
+        B UART4_IRQHandler
+
+        PUBWEAK UART5_IRQHandler
+        SECTION .text:CODE:REORDER:NOROOT(1)
+UART5_IRQHandler
+        B UART5_IRQHandler
+
+        PUBWEAK TIM6_IRQHandler
+        SECTION .text:CODE:REORDER:NOROOT(1)
+TIM6_IRQHandler
+        B TIM6_IRQHandler
+
+        PUBWEAK TIM7_IRQHandler
+        SECTION .text:CODE:REORDER:NOROOT(1)
+TIM7_IRQHandler
+        B TIM7_IRQHandler
+
+        PUBWEAK DMA2_Channel1_IRQHandler
+        SECTION .text:CODE:REORDER:NOROOT(1)
+DMA2_Channel1_IRQHandler
+        B DMA2_Channel1_IRQHandler
+
+        PUBWEAK DMA2_Channel2_IRQHandler
+        SECTION .text:CODE:REORDER:NOROOT(1)
+DMA2_Channel2_IRQHandler
+        B DMA2_Channel2_IRQHandler
+
+        PUBWEAK DMA2_Channel3_IRQHandler
+        SECTION .text:CODE:REORDER:NOROOT(1)
+DMA2_Channel3_IRQHandler
+        B DMA2_Channel3_IRQHandler
+
+        PUBWEAK DMA2_Channel4_5_IRQHandler
+        SECTION .text:CODE:REORDER:NOROOT(1)
+DMA2_Channel4_5_IRQHandler
+        B DMA2_Channel4_5_IRQHandler
+        
+        
+        END
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

bsp/stm32f10x_HAL/Libraries/CMSIS/Device/ST/STM32F1xx/Source/Templates/iar/startup_stm32f105xc.s

@@ -0,0 +1,526 @@
+;******************** (C) COPYRIGHT 2017 STMicroelectronics *******************
+;* File Name          : startup_stm32f105xc.s
+;* Author             : MCD Application Team
+;* Version            : V4.2.0
+;* Date               : 31-March-2017
+;* Description        : STM32F105xC Connectivity line devices vector table for 
+;*                      EWARM toolchain.
+;*                      This module performs:
+;*                      - Set the initial SP
+;*                      - Configure the clock system
+;*                      - Set the initial PC == __iar_program_start,
+;*                      - Set the vector table entries with the exceptions ISR 
+;*                        address.
+;*                      After Reset the Cortex-M3 processor is in Thread mode,
+;*                      priority is Privileged, and the Stack is set to Main.
+;********************************************************************************
+;* 
+;* <h2><center>&copy; COPYRIGHT(c) 2017 STMicroelectronics</center></h2>
+;* 
+;* Redistribution and use in source and binary forms, with or without modification,
+;* are permitted provided that the following conditions are met:
+;*   1. Redistributions of source code must retain the above copyright notice,
+;*      this list of conditions and the following disclaimer.
+;*   2. Redistributions in binary form must reproduce the above copyright notice,
+;*      this list of conditions and the following disclaimer in the documentation
+;*      and/or other materials provided with the distribution.
+;*   3. Neither the name of STMicroelectronics nor the names of its contributors
+;*      may be used to endorse or promote products derived from this software
+;*      without specific prior written permission.
+;* 
+;* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+;* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+;* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+;* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+;* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+;* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+;* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+;* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+;* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+;* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+;* 
+;*******************************************************************************
+;
+;
+; The modules in this file are included in the libraries, and may be replaced
+; by any user-defined modules that define the PUBLIC symbol _program_start or
+; a user defined start symbol.
+; To override the cstartup defined in the library, simply add your modified
+; version to the workbench project.
+;
+; The vector table is normally located at address 0.
+; When debugging in RAM, it can be located in RAM, aligned to at least 2^6.
+; The name "__vector_table" has special meaning for C-SPY:
+; it is where the SP start value is found, and the NVIC vector
+; table register (VTOR) is initialized to this address if != 0.
+;
+; Cortex-M version
+;
+
+        MODULE  ?cstartup
+
+        ;; Forward declaration of sections.
+        SECTION CSTACK:DATA:NOROOT(3)
+
+        SECTION .intvec:CODE:NOROOT(2)
+
+        EXTERN  __iar_program_start
+        EXTERN  SystemInit        
+        PUBLIC  __vector_table
+
+        DATA
+__vector_table
+        DCD     sfe(CSTACK)
+        DCD     Reset_Handler             ; Reset Handler
+        DCD     NMI_Handler               ; NMI Handler
+        DCD     HardFault_Handler         ; Hard Fault Handler
+        DCD     MemManage_Handler         ; MPU Fault Handler
+        DCD     BusFault_Handler          ; Bus Fault Handler
+        DCD     UsageFault_Handler        ; Usage Fault Handler
+        DCD     0                         ; Reserved
+        DCD     0                         ; Reserved
+        DCD     0                         ; Reserved
+        DCD     0                         ; Reserved
+        DCD     SVC_Handler               ; SVCall Handler
+        DCD     DebugMon_Handler          ; Debug Monitor Handler
+        DCD     0                         ; Reserved
+        DCD     PendSV_Handler            ; PendSV Handler
+        DCD     SysTick_Handler           ; SysTick Handler
+
+         ; External Interrupts
+        DCD     WWDG_IRQHandler            ; Window Watchdog
+        DCD     PVD_IRQHandler             ; PVD through EXTI Line detect
+        DCD     TAMPER_IRQHandler          ; Tamper
+        DCD     RTC_IRQHandler             ; RTC
+        DCD     FLASH_IRQHandler           ; Flash
+        DCD     RCC_IRQHandler             ; RCC
+        DCD     EXTI0_IRQHandler           ; EXTI Line 0
+        DCD     EXTI1_IRQHandler           ; EXTI Line 1
+        DCD     EXTI2_IRQHandler           ; EXTI Line 2
+        DCD     EXTI3_IRQHandler           ; EXTI Line 3
+        DCD     EXTI4_IRQHandler           ; EXTI Line 4
+        DCD     DMA1_Channel1_IRQHandler   ; DMA1 Channel 1
+        DCD     DMA1_Channel2_IRQHandler   ; DMA1 Channel 2
+        DCD     DMA1_Channel3_IRQHandler   ; DMA1 Channel 3
+        DCD     DMA1_Channel4_IRQHandler   ; DMA1 Channel 4
+        DCD     DMA1_Channel5_IRQHandler   ; DMA1 Channel 5
+        DCD     DMA1_Channel6_IRQHandler   ; DMA1 Channel 6
+        DCD     DMA1_Channel7_IRQHandler   ; DMA1 Channel 7
+        DCD     ADC1_2_IRQHandler          ; ADC1 and ADC2
+        DCD     CAN1_TX_IRQHandler         ; CAN1 TX
+        DCD     CAN1_RX0_IRQHandler        ; CAN1 RX0
+        DCD     CAN1_RX1_IRQHandler        ; CAN1 RX1
+        DCD     CAN1_SCE_IRQHandler        ; CAN1 SCE
+        DCD     EXTI9_5_IRQHandler         ; EXTI Line 9..5
+        DCD     TIM1_BRK_IRQHandler        ; TIM1 Break
+        DCD     TIM1_UP_IRQHandler         ; TIM1 Update
+        DCD     TIM1_TRG_COM_IRQHandler    ; TIM1 Trigger and Commutation
+        DCD     TIM1_CC_IRQHandler         ; TIM1 Capture Compare
+        DCD     TIM2_IRQHandler            ; TIM2
+        DCD     TIM3_IRQHandler            ; TIM3
+        DCD     TIM4_IRQHandler            ; TIM4
+        DCD     I2C1_EV_IRQHandler         ; I2C1 Event
+        DCD     I2C1_ER_IRQHandler         ; I2C1 Error
+        DCD     I2C2_EV_IRQHandler         ; I2C2 Event
+        DCD     I2C2_ER_IRQHandler         ; I2C1 Error
+        DCD     SPI1_IRQHandler            ; SPI1
+        DCD     SPI2_IRQHandler            ; SPI2
+        DCD     USART1_IRQHandler          ; USART1
+        DCD     USART2_IRQHandler          ; USART2
+        DCD     USART3_IRQHandler          ; USART3
+        DCD     EXTI15_10_IRQHandler       ; EXTI Line 15..10
+        DCD     RTC_Alarm_IRQHandler        ; RTC alarm through EXTI line
+        DCD     OTG_FS_WKUP_IRQHandler     ; USB OTG FS Wakeup through EXTI line
+        DCD     0                          ; Reserved
+        DCD     0                          ; Reserved
+        DCD     0                          ; Reserved
+        DCD     0                          ; Reserved
+        DCD     0                          ; Reserved
+        DCD     0                          ; Reserved
+        DCD     0                          ; Reserved
+        DCD     TIM5_IRQHandler            ; TIM5
+        DCD     SPI3_IRQHandler            ; SPI3
+        DCD     UART4_IRQHandler           ; UART4
+        DCD     UART5_IRQHandler           ; UART5
+        DCD     TIM6_IRQHandler            ; TIM6
+        DCD     TIM7_IRQHandler            ; TIM7
+        DCD     DMA2_Channel1_IRQHandler   ; DMA2 Channel1
+        DCD     DMA2_Channel2_IRQHandler   ; DMA2 Channel2
+        DCD     DMA2_Channel3_IRQHandler   ; DMA2 Channel3
+        DCD     DMA2_Channel4_IRQHandler   ; DMA2 Channel4
+        DCD     DMA2_Channel5_IRQHandler   ; DMA2 Channel5
+        DCD     0                          ; Reserved
+        DCD     0                          ; Reserved
+        DCD     CAN2_TX_IRQHandler         ; CAN2 TX
+        DCD     CAN2_RX0_IRQHandler        ; CAN2 RX0
+        DCD     CAN2_RX1_IRQHandler        ; CAN2 RX1
+        DCD     CAN2_SCE_IRQHandler        ; CAN2 SCE
+        DCD     OTG_FS_IRQHandler          ; USB OTG FS
+
+;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
+;;
+;; Default interrupt handlers.
+;;
+        THUMB
+
+        PUBWEAK Reset_Handler
+        SECTION .text:CODE:REORDER:NOROOT(2)
+Reset_Handler
+        LDR     R0, =SystemInit
+        BLX     R0
+        LDR     R0, =__iar_program_start
+        BX      R0
+        
+        PUBWEAK NMI_Handler
+        SECTION .text:CODE:REORDER:NOROOT(1)
+NMI_Handler
+        B NMI_Handler
+
+        PUBWEAK HardFault_Handler
+        SECTION .text:CODE:REORDER:NOROOT(1)
+HardFault_Handler
+        B HardFault_Handler
+
+        PUBWEAK MemManage_Handler
+        SECTION .text:CODE:REORDER:NOROOT(1)
+MemManage_Handler
+        B MemManage_Handler
+
+        PUBWEAK BusFault_Handler
+        SECTION .text:CODE:REORDER:NOROOT(1)
+BusFault_Handler
+        B BusFault_Handler
+
+        PUBWEAK UsageFault_Handler
+        SECTION .text:CODE:REORDER:NOROOT(1)
+UsageFault_Handler
+        B UsageFault_Handler
+
+        PUBWEAK SVC_Handler
+        SECTION .text:CODE:REORDER:NOROOT(1)
+SVC_Handler
+        B SVC_Handler
+
+        PUBWEAK DebugMon_Handler
+        SECTION .text:CODE:REORDER:NOROOT(1)
+DebugMon_Handler
+        B DebugMon_Handler
+
+        PUBWEAK PendSV_Handler
+        SECTION .text:CODE:REORDER:NOROOT(1)
+PendSV_Handler
+        B PendSV_Handler
+
+        PUBWEAK SysTick_Handler
+        SECTION .text:CODE:REORDER:NOROOT(1)
+SysTick_Handler
+        B SysTick_Handler
+
+        PUBWEAK WWDG_IRQHandler
+        SECTION .text:CODE:REORDER:NOROOT(1)
+WWDG_IRQHandler
+        B WWDG_IRQHandler
+
+        PUBWEAK PVD_IRQHandler
+        SECTION .text:CODE:REORDER:NOROOT(1)
+PVD_IRQHandler
+        B PVD_IRQHandler
+
+        PUBWEAK TAMPER_IRQHandler
+        SECTION .text:CODE:REORDER:NOROOT(1)
+TAMPER_IRQHandler
+        B TAMPER_IRQHandler
+
+        PUBWEAK RTC_IRQHandler
+        SECTION .text:CODE:REORDER:NOROOT(1)
+RTC_IRQHandler
+        B RTC_IRQHandler
+
+        PUBWEAK FLASH_IRQHandler
+        SECTION .text:CODE:REORDER:NOROOT(1)
+FLASH_IRQHandler
+        B FLASH_IRQHandler
+
+        PUBWEAK RCC_IRQHandler
+        SECTION .text:CODE:REORDER:NOROOT(1)
+RCC_IRQHandler
+        B RCC_IRQHandler
+
+        PUBWEAK EXTI0_IRQHandler
+        SECTION .text:CODE:REORDER:NOROOT(1)
+EXTI0_IRQHandler
+        B EXTI0_IRQHandler
+
+        PUBWEAK EXTI1_IRQHandler
+        SECTION .text:CODE:REORDER:NOROOT(1)
+EXTI1_IRQHandler
+        B EXTI1_IRQHandler
+
+        PUBWEAK EXTI2_IRQHandler
+        SECTION .text:CODE:REORDER:NOROOT(1)
+EXTI2_IRQHandler
+        B EXTI2_IRQHandler
+
+        PUBWEAK EXTI3_IRQHandler
+        SECTION .text:CODE:REORDER:NOROOT(1)
+EXTI3_IRQHandler
+        B EXTI3_IRQHandler
+
+
+        PUBWEAK EXTI4_IRQHandler
+        SECTION .text:CODE:REORDER:NOROOT(1)
+EXTI4_IRQHandler
+        B EXTI4_IRQHandler
+
+        PUBWEAK DMA1_Channel1_IRQHandler
+        SECTION .text:CODE:REORDER:NOROOT(1)
+DMA1_Channel1_IRQHandler
+        B DMA1_Channel1_IRQHandler
+
+        PUBWEAK DMA1_Channel2_IRQHandler
+        SECTION .text:CODE:REORDER:NOROOT(1)
+DMA1_Channel2_IRQHandler
+        B DMA1_Channel2_IRQHandler
+
+        PUBWEAK DMA1_Channel3_IRQHandler
+        SECTION .text:CODE:REORDER:NOROOT(1)
+DMA1_Channel3_IRQHandler
+        B DMA1_Channel3_IRQHandler
+
+        PUBWEAK DMA1_Channel4_IRQHandler
+        SECTION .text:CODE:REORDER:NOROOT(1)
+DMA1_Channel4_IRQHandler
+        B DMA1_Channel4_IRQHandler
+
+        PUBWEAK DMA1_Channel5_IRQHandler
+        SECTION .text:CODE:REORDER:NOROOT(1)
+DMA1_Channel5_IRQHandler
+        B DMA1_Channel5_IRQHandler
+
+        PUBWEAK DMA1_Channel6_IRQHandler
+        SECTION .text:CODE:REORDER:NOROOT(1)
+DMA1_Channel6_IRQHandler
+        B DMA1_Channel6_IRQHandler
+
+        PUBWEAK DMA1_Channel7_IRQHandler
+        SECTION .text:CODE:REORDER:NOROOT(1)
+DMA1_Channel7_IRQHandler
+        B DMA1_Channel7_IRQHandler
+
+        PUBWEAK ADC1_2_IRQHandler
+        SECTION .text:CODE:REORDER:NOROOT(1)
+ADC1_2_IRQHandler
+        B ADC1_2_IRQHandler
+
+        PUBWEAK CAN1_TX_IRQHandler
+        SECTION .text:CODE:REORDER:NOROOT(1)
+CAN1_TX_IRQHandler
+        B CAN1_TX_IRQHandler
+
+        PUBWEAK CAN1_RX0_IRQHandler
+        SECTION .text:CODE:REORDER:NOROOT(1)
+CAN1_RX0_IRQHandler
+        B CAN1_RX0_IRQHandler
+
+        PUBWEAK CAN1_RX1_IRQHandler
+        SECTION .text:CODE:REORDER:NOROOT(1)
+CAN1_RX1_IRQHandler
+        B CAN1_RX1_IRQHandler
+
+        PUBWEAK CAN1_SCE_IRQHandler
+        SECTION .text:CODE:REORDER:NOROOT(1)
+CAN1_SCE_IRQHandler
+        B CAN1_SCE_IRQHandler
+
+        PUBWEAK EXTI9_5_IRQHandler
+        SECTION .text:CODE:REORDER:NOROOT(1)
+EXTI9_5_IRQHandler
+        B EXTI9_5_IRQHandler
+
+        PUBWEAK TIM1_BRK_IRQHandler
+        SECTION .text:CODE:REORDER:NOROOT(1)
+TIM1_BRK_IRQHandler
+        B TIM1_BRK_IRQHandler
+
+        PUBWEAK TIM1_UP_IRQHandler
+        SECTION .text:CODE:REORDER:NOROOT(1)
+TIM1_UP_IRQHandler
+        B TIM1_UP_IRQHandler
+
+        PUBWEAK TIM1_TRG_COM_IRQHandler
+        SECTION .text:CODE:REORDER:NOROOT(1)
+TIM1_TRG_COM_IRQHandler
+        B TIM1_TRG_COM_IRQHandler
+
+        PUBWEAK TIM1_CC_IRQHandler
+        SECTION .text:CODE:REORDER:NOROOT(1)
+TIM1_CC_IRQHandler
+        B TIM1_CC_IRQHandler
+
+        PUBWEAK TIM2_IRQHandler
+        SECTION .text:CODE:REORDER:NOROOT(1)
+TIM2_IRQHandler
+        B TIM2_IRQHandler
+
+        PUBWEAK TIM3_IRQHandler
+        SECTION .text:CODE:REORDER:NOROOT(1)
+TIM3_IRQHandler
+        B TIM3_IRQHandler
+
+        PUBWEAK TIM4_IRQHandler
+        SECTION .text:CODE:REORDER:NOROOT(1)
+TIM4_IRQHandler
+        B TIM4_IRQHandler
+
+        PUBWEAK I2C1_EV_IRQHandler
+        SECTION .text:CODE:REORDER:NOROOT(1)
+I2C1_EV_IRQHandler
+        B I2C1_EV_IRQHandler
+
+        PUBWEAK I2C1_ER_IRQHandler
+        SECTION .text:CODE:REORDER:NOROOT(1)
+I2C1_ER_IRQHandler
+        B I2C1_ER_IRQHandler
+
+        PUBWEAK I2C2_EV_IRQHandler
+        SECTION .text:CODE:REORDER:NOROOT(1)
+I2C2_EV_IRQHandler
+        B I2C2_EV_IRQHandler
+
+        PUBWEAK I2C2_ER_IRQHandler
+        SECTION .text:CODE:REORDER:NOROOT(1)
+I2C2_ER_IRQHandler
+        B I2C2_ER_IRQHandler
+
+        PUBWEAK SPI1_IRQHandler
+        SECTION .text:CODE:REORDER:NOROOT(1)
+SPI1_IRQHandler
+        B SPI1_IRQHandler    
+
+        PUBWEAK SPI2_IRQHandler
+        SECTION .text:CODE:REORDER:NOROOT(1)
+SPI2_IRQHandler
+        B SPI2_IRQHandler
+
+        PUBWEAK USART1_IRQHandler
+        SECTION .text:CODE:REORDER:NOROOT(1)
+USART1_IRQHandler
+        B USART1_IRQHandler
+
+        PUBWEAK USART2_IRQHandler
+        SECTION .text:CODE:REORDER:NOROOT(1)
+USART2_IRQHandler
+        B USART2_IRQHandler
+
+        PUBWEAK USART3_IRQHandler
+        SECTION .text:CODE:REORDER:NOROOT(1)
+USART3_IRQHandler
+        B USART3_IRQHandler
+
+        PUBWEAK EXTI15_10_IRQHandler
+        SECTION .text:CODE:REORDER:NOROOT(1)
+EXTI15_10_IRQHandler
+        B EXTI15_10_IRQHandler
+
+        PUBWEAK RTC_Alarm_IRQHandler
+        SECTION .text:CODE:REORDER:NOROOT(1)
+RTC_Alarm_IRQHandler
+        B RTC_Alarm_IRQHandler
+
+        PUBWEAK OTG_FS_WKUP_IRQHandler
+        SECTION .text:CODE:REORDER:NOROOT(1)
+OTG_FS_WKUP_IRQHandler
+        B OTG_FS_WKUP_IRQHandler
+
+        PUBWEAK TIM5_IRQHandler
+        SECTION .text:CODE:REORDER:NOROOT(1)
+TIM5_IRQHandler
+        B TIM5_IRQHandler
+
+        PUBWEAK SPI3_IRQHandler
+        SECTION .text:CODE:REORDER:NOROOT(1)
+SPI3_IRQHandler
+        B SPI3_IRQHandler
+
+        PUBWEAK UART4_IRQHandler
+        SECTION .text:CODE:REORDER:NOROOT(1)
+UART4_IRQHandler
+        B UART4_IRQHandler
+
+        PUBWEAK UART5_IRQHandler
+        SECTION .text:CODE:REORDER:NOROOT(1)
+UART5_IRQHandler
+        B UART5_IRQHandler
+
+        PUBWEAK TIM6_IRQHandler
+        SECTION .text:CODE:REORDER:NOROOT(1)
+TIM6_IRQHandler
+        B TIM6_IRQHandler
+
+        PUBWEAK TIM7_IRQHandler
+        SECTION .text:CODE:REORDER:NOROOT(1)
+TIM7_IRQHandler
+        B TIM7_IRQHandler
+
+        PUBWEAK DMA2_Channel1_IRQHandler
+        SECTION .text:CODE:REORDER:NOROOT(1)
+DMA2_Channel1_IRQHandler
+        B DMA2_Channel1_IRQHandler
+
+        PUBWEAK DMA2_Channel2_IRQHandler
+        SECTION .text:CODE:REORDER:NOROOT(1)
+DMA2_Channel2_IRQHandler
+        B DMA2_Channel2_IRQHandler
+
+        PUBWEAK DMA2_Channel3_IRQHandler
+        SECTION .text:CODE:REORDER:NOROOT(1)
+DMA2_Channel3_IRQHandler
+        B DMA2_Channel3_IRQHandler
+
+        PUBWEAK DMA2_Channel4_IRQHandler
+        SECTION .text:CODE:REORDER:NOROOT(1)
+DMA2_Channel4_IRQHandler
+        B DMA2_Channel4_IRQHandler
+
+        PUBWEAK DMA2_Channel5_IRQHandler
+        SECTION .text:CODE:REORDER:NOROOT(1)
+DMA2_Channel5_IRQHandler
+        B DMA2_Channel5_IRQHandler
+
+        PUBWEAK ETH_IRQHandler
+        SECTION .text:CODE:REORDER:NOROOT(1)
+ETH_IRQHandler
+        B ETH_IRQHandler
+
+        PUBWEAK ETH_WKUP_IRQHandler
+        SECTION .text:CODE:REORDER:NOROOT(1)
+ETH_WKUP_IRQHandler
+        B ETH_WKUP_IRQHandler
+
+        PUBWEAK CAN2_TX_IRQHandler
+        SECTION .text:CODE:REORDER:NOROOT(1)
+CAN2_TX_IRQHandler
+        B CAN2_TX_IRQHandler
+
+        PUBWEAK CAN2_RX0_IRQHandler
+        SECTION .text:CODE:REORDER:NOROOT(1)
+CAN2_RX0_IRQHandler
+        B CAN2_RX0_IRQHandler
+
+        PUBWEAK CAN2_RX1_IRQHandler
+        SECTION .text:CODE:REORDER:NOROOT(1)
+CAN2_RX1_IRQHandler
+        B CAN2_RX1_IRQHandler
+
+        PUBWEAK CAN2_SCE_IRQHandler
+        SECTION .text:CODE:REORDER:NOROOT(1)
+CAN2_SCE_IRQHandler
+        B CAN2_SCE_IRQHandler
+
+        PUBWEAK OTG_FS_IRQHandler
+        SECTION .text:CODE:REORDER:NOROOT(1)
+OTG_FS_IRQHandler
+        B OTG_FS_IRQHandler
+
+        END
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

bsp/stm32f10x_HAL/Libraries/CMSIS/Device/ST/STM32F1xx/Source/Templates/iar/startup_stm32f107xc.s

@@ -0,0 +1,526 @@
+;******************** (C) COPYRIGHT 2017 STMicroelectronics *******************
+;* File Name          : startup_stm32f107xc.s
+;* Author             : MCD Application Team
+;* Version            : V4.2.0
+;* Date               : 31-March-2017
+;* Description        : STM32F107xC Connectivity line devices vector table for 
+;*                      EWARM toolchain.
+;*                      This module performs:
+;*                      - Set the initial SP
+;*                      - Configure the clock system
+;*                      - Set the initial PC == __iar_program_start,
+;*                      - Set the vector table entries with the exceptions ISR 
+;*                        address.
+;*                      After Reset the Cortex-M3 processor is in Thread mode,
+;*                      priority is Privileged, and the Stack is set to Main.
+;********************************************************************************
+;* 
+;* <h2><center>&copy; COPYRIGHT(c) 2017 STMicroelectronics</center></h2>
+;* 
+;* Redistribution and use in source and binary forms, with or without modification,
+;* are permitted provided that the following conditions are met:
+;*   1. Redistributions of source code must retain the above copyright notice,
+;*      this list of conditions and the following disclaimer.
+;*   2. Redistributions in binary form must reproduce the above copyright notice,
+;*      this list of conditions and the following disclaimer in the documentation
+;*      and/or other materials provided with the distribution.
+;*   3. Neither the name of STMicroelectronics nor the names of its contributors
+;*      may be used to endorse or promote products derived from this software
+;*      without specific prior written permission.
+;* 
+;* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+;* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+;* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+;* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+;* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+;* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+;* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+;* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+;* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+;* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+;* 
+;*******************************************************************************
+;
+;
+; The modules in this file are included in the libraries, and may be replaced
+; by any user-defined modules that define the PUBLIC symbol _program_start or
+; a user defined start symbol.
+; To override the cstartup defined in the library, simply add your modified
+; version to the workbench project.
+;
+; The vector table is normally located at address 0.
+; When debugging in RAM, it can be located in RAM, aligned to at least 2^6.
+; The name "__vector_table" has special meaning for C-SPY:
+; it is where the SP start value is found, and the NVIC vector
+; table register (VTOR) is initialized to this address if != 0.
+;
+; Cortex-M version
+;
+
+        MODULE  ?cstartup
+
+        ;; Forward declaration of sections.
+        SECTION CSTACK:DATA:NOROOT(3)
+
+        SECTION .intvec:CODE:NOROOT(2)
+
+        EXTERN  __iar_program_start
+        EXTERN  SystemInit        
+        PUBLIC  __vector_table
+
+        DATA
+__vector_table
+        DCD     sfe(CSTACK)
+        DCD     Reset_Handler             ; Reset Handler
+        DCD     NMI_Handler               ; NMI Handler
+        DCD     HardFault_Handler         ; Hard Fault Handler
+        DCD     MemManage_Handler         ; MPU Fault Handler
+        DCD     BusFault_Handler          ; Bus Fault Handler
+        DCD     UsageFault_Handler        ; Usage Fault Handler
+        DCD     0                         ; Reserved
+        DCD     0                         ; Reserved
+        DCD     0                         ; Reserved
+        DCD     0                         ; Reserved
+        DCD     SVC_Handler               ; SVCall Handler
+        DCD     DebugMon_Handler          ; Debug Monitor Handler
+        DCD     0                         ; Reserved
+        DCD     PendSV_Handler            ; PendSV Handler
+        DCD     SysTick_Handler           ; SysTick Handler
+
+         ; External Interrupts
+        DCD     WWDG_IRQHandler            ; Window Watchdog
+        DCD     PVD_IRQHandler             ; PVD through EXTI Line detect
+        DCD     TAMPER_IRQHandler          ; Tamper
+        DCD     RTC_IRQHandler             ; RTC
+        DCD     FLASH_IRQHandler           ; Flash
+        DCD     RCC_IRQHandler             ; RCC
+        DCD     EXTI0_IRQHandler           ; EXTI Line 0
+        DCD     EXTI1_IRQHandler           ; EXTI Line 1
+        DCD     EXTI2_IRQHandler           ; EXTI Line 2
+        DCD     EXTI3_IRQHandler           ; EXTI Line 3
+        DCD     EXTI4_IRQHandler           ; EXTI Line 4
+        DCD     DMA1_Channel1_IRQHandler   ; DMA1 Channel 1
+        DCD     DMA1_Channel2_IRQHandler   ; DMA1 Channel 2
+        DCD     DMA1_Channel3_IRQHandler   ; DMA1 Channel 3
+        DCD     DMA1_Channel4_IRQHandler   ; DMA1 Channel 4
+        DCD     DMA1_Channel5_IRQHandler   ; DMA1 Channel 5
+        DCD     DMA1_Channel6_IRQHandler   ; DMA1 Channel 6
+        DCD     DMA1_Channel7_IRQHandler   ; DMA1 Channel 7
+        DCD     ADC1_2_IRQHandler          ; ADC1 and ADC2
+        DCD     CAN1_TX_IRQHandler         ; CAN1 TX
+        DCD     CAN1_RX0_IRQHandler        ; CAN1 RX0
+        DCD     CAN1_RX1_IRQHandler        ; CAN1 RX1
+        DCD     CAN1_SCE_IRQHandler        ; CAN1 SCE
+        DCD     EXTI9_5_IRQHandler         ; EXTI Line 9..5
+        DCD     TIM1_BRK_IRQHandler        ; TIM1 Break
+        DCD     TIM1_UP_IRQHandler         ; TIM1 Update
+        DCD     TIM1_TRG_COM_IRQHandler    ; TIM1 Trigger and Commutation
+        DCD     TIM1_CC_IRQHandler         ; TIM1 Capture Compare
+        DCD     TIM2_IRQHandler            ; TIM2
+        DCD     TIM3_IRQHandler            ; TIM3
+        DCD     TIM4_IRQHandler            ; TIM4
+        DCD     I2C1_EV_IRQHandler         ; I2C1 Event
+        DCD     I2C1_ER_IRQHandler         ; I2C1 Error
+        DCD     I2C2_EV_IRQHandler         ; I2C2 Event
+        DCD     I2C2_ER_IRQHandler         ; I2C1 Error
+        DCD     SPI1_IRQHandler            ; SPI1
+        DCD     SPI2_IRQHandler            ; SPI2
+        DCD     USART1_IRQHandler          ; USART1
+        DCD     USART2_IRQHandler          ; USART2
+        DCD     USART3_IRQHandler          ; USART3
+        DCD     EXTI15_10_IRQHandler       ; EXTI Line 15..10
+        DCD     RTC_Alarm_IRQHandler        ; RTC alarm through EXTI line
+        DCD     OTG_FS_WKUP_IRQHandler     ; USB OTG FS Wakeup through EXTI line
+        DCD     0                          ; Reserved
+        DCD     0                          ; Reserved
+        DCD     0                          ; Reserved
+        DCD     0                          ; Reserved
+        DCD     0                          ; Reserved
+        DCD     0                          ; Reserved
+        DCD     0                          ; Reserved
+        DCD     TIM5_IRQHandler            ; TIM5
+        DCD     SPI3_IRQHandler            ; SPI3
+        DCD     UART4_IRQHandler           ; UART4
+        DCD     UART5_IRQHandler           ; UART5
+        DCD     TIM6_IRQHandler            ; TIM6
+        DCD     TIM7_IRQHandler            ; TIM7
+        DCD     DMA2_Channel1_IRQHandler   ; DMA2 Channel1
+        DCD     DMA2_Channel2_IRQHandler   ; DMA2 Channel2
+        DCD     DMA2_Channel3_IRQHandler   ; DMA2 Channel3
+        DCD     DMA2_Channel4_IRQHandler   ; DMA2 Channel4
+        DCD     DMA2_Channel5_IRQHandler   ; DMA2 Channel5
+        DCD     ETH_IRQHandler             ; Ethernet
+        DCD     ETH_WKUP_IRQHandler        ; Ethernet Wakeup through EXTI line
+        DCD     CAN2_TX_IRQHandler         ; CAN2 TX
+        DCD     CAN2_RX0_IRQHandler        ; CAN2 RX0
+        DCD     CAN2_RX1_IRQHandler        ; CAN2 RX1
+        DCD     CAN2_SCE_IRQHandler        ; CAN2 SCE
+        DCD     OTG_FS_IRQHandler          ; USB OTG FS
+
+;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
+;;
+;; Default interrupt handlers.
+;;
+        THUMB
+
+        PUBWEAK Reset_Handler
+        SECTION .text:CODE:REORDER:NOROOT(2)
+Reset_Handler
+        LDR     R0, =SystemInit
+        BLX     R0
+        LDR     R0, =__iar_program_start
+        BX      R0
+        
+        PUBWEAK NMI_Handler
+        SECTION .text:CODE:REORDER:NOROOT(1)
+NMI_Handler
+        B NMI_Handler
+
+        PUBWEAK HardFault_Handler
+        SECTION .text:CODE:REORDER:NOROOT(1)
+HardFault_Handler
+        B HardFault_Handler
+
+        PUBWEAK MemManage_Handler
+        SECTION .text:CODE:REORDER:NOROOT(1)
+MemManage_Handler
+        B MemManage_Handler
+
+        PUBWEAK BusFault_Handler
+        SECTION .text:CODE:REORDER:NOROOT(1)
+BusFault_Handler
+        B BusFault_Handler
+
+        PUBWEAK UsageFault_Handler
+        SECTION .text:CODE:REORDER:NOROOT(1)
+UsageFault_Handler
+        B UsageFault_Handler
+
+        PUBWEAK SVC_Handler
+        SECTION .text:CODE:REORDER:NOROOT(1)
+SVC_Handler
+        B SVC_Handler
+
+        PUBWEAK DebugMon_Handler
+        SECTION .text:CODE:REORDER:NOROOT(1)
+DebugMon_Handler
+        B DebugMon_Handler
+
+        PUBWEAK PendSV_Handler
+        SECTION .text:CODE:REORDER:NOROOT(1)
+PendSV_Handler
+        B PendSV_Handler
+
+        PUBWEAK SysTick_Handler
+        SECTION .text:CODE:REORDER:NOROOT(1)
+SysTick_Handler
+        B SysTick_Handler
+
+        PUBWEAK WWDG_IRQHandler
+        SECTION .text:CODE:REORDER:NOROOT(1)
+WWDG_IRQHandler
+        B WWDG_IRQHandler
+
+        PUBWEAK PVD_IRQHandler
+        SECTION .text:CODE:REORDER:NOROOT(1)
+PVD_IRQHandler
+        B PVD_IRQHandler
+
+        PUBWEAK TAMPER_IRQHandler
+        SECTION .text:CODE:REORDER:NOROOT(1)
+TAMPER_IRQHandler
+        B TAMPER_IRQHandler
+
+        PUBWEAK RTC_IRQHandler
+        SECTION .text:CODE:REORDER:NOROOT(1)
+RTC_IRQHandler
+        B RTC_IRQHandler
+
+        PUBWEAK FLASH_IRQHandler
+        SECTION .text:CODE:REORDER:NOROOT(1)
+FLASH_IRQHandler
+        B FLASH_IRQHandler
+
+        PUBWEAK RCC_IRQHandler
+        SECTION .text:CODE:REORDER:NOROOT(1)
+RCC_IRQHandler
+        B RCC_IRQHandler
+
+        PUBWEAK EXTI0_IRQHandler
+        SECTION .text:CODE:REORDER:NOROOT(1)
+EXTI0_IRQHandler
+        B EXTI0_IRQHandler
+
+        PUBWEAK EXTI1_IRQHandler
+        SECTION .text:CODE:REORDER:NOROOT(1)
+EXTI1_IRQHandler
+        B EXTI1_IRQHandler
+
+        PUBWEAK EXTI2_IRQHandler
+        SECTION .text:CODE:REORDER:NOROOT(1)
+EXTI2_IRQHandler
+        B EXTI2_IRQHandler
+
+        PUBWEAK EXTI3_IRQHandler
+        SECTION .text:CODE:REORDER:NOROOT(1)
+EXTI3_IRQHandler
+        B EXTI3_IRQHandler
+
+
+        PUBWEAK EXTI4_IRQHandler
+        SECTION .text:CODE:REORDER:NOROOT(1)
+EXTI4_IRQHandler
+        B EXTI4_IRQHandler
+
+        PUBWEAK DMA1_Channel1_IRQHandler
+        SECTION .text:CODE:REORDER:NOROOT(1)
+DMA1_Channel1_IRQHandler
+        B DMA1_Channel1_IRQHandler
+
+        PUBWEAK DMA1_Channel2_IRQHandler
+        SECTION .text:CODE:REORDER:NOROOT(1)
+DMA1_Channel2_IRQHandler
+        B DMA1_Channel2_IRQHandler
+
+        PUBWEAK DMA1_Channel3_IRQHandler
+        SECTION .text:CODE:REORDER:NOROOT(1)
+DMA1_Channel3_IRQHandler
+        B DMA1_Channel3_IRQHandler
+
+        PUBWEAK DMA1_Channel4_IRQHandler
+        SECTION .text:CODE:REORDER:NOROOT(1)
+DMA1_Channel4_IRQHandler
+        B DMA1_Channel4_IRQHandler
+
+        PUBWEAK DMA1_Channel5_IRQHandler
+        SECTION .text:CODE:REORDER:NOROOT(1)
+DMA1_Channel5_IRQHandler
+        B DMA1_Channel5_IRQHandler
+
+        PUBWEAK DMA1_Channel6_IRQHandler
+        SECTION .text:CODE:REORDER:NOROOT(1)
+DMA1_Channel6_IRQHandler
+        B DMA1_Channel6_IRQHandler
+
+        PUBWEAK DMA1_Channel7_IRQHandler
+        SECTION .text:CODE:REORDER:NOROOT(1)
+DMA1_Channel7_IRQHandler
+        B DMA1_Channel7_IRQHandler
+
+        PUBWEAK ADC1_2_IRQHandler
+        SECTION .text:CODE:REORDER:NOROOT(1)
+ADC1_2_IRQHandler
+        B ADC1_2_IRQHandler
+
+        PUBWEAK CAN1_TX_IRQHandler
+        SECTION .text:CODE:REORDER:NOROOT(1)
+CAN1_TX_IRQHandler
+        B CAN1_TX_IRQHandler
+
+        PUBWEAK CAN1_RX0_IRQHandler
+        SECTION .text:CODE:REORDER:NOROOT(1)
+CAN1_RX0_IRQHandler
+        B CAN1_RX0_IRQHandler
+
+        PUBWEAK CAN1_RX1_IRQHandler
+        SECTION .text:CODE:REORDER:NOROOT(1)
+CAN1_RX1_IRQHandler
+        B CAN1_RX1_IRQHandler
+
+        PUBWEAK CAN1_SCE_IRQHandler
+        SECTION .text:CODE:REORDER:NOROOT(1)
+CAN1_SCE_IRQHandler
+        B CAN1_SCE_IRQHandler
+
+        PUBWEAK EXTI9_5_IRQHandler
+        SECTION .text:CODE:REORDER:NOROOT(1)
+EXTI9_5_IRQHandler
+        B EXTI9_5_IRQHandler
+
+        PUBWEAK TIM1_BRK_IRQHandler
+        SECTION .text:CODE:REORDER:NOROOT(1)
+TIM1_BRK_IRQHandler
+        B TIM1_BRK_IRQHandler
+
+        PUBWEAK TIM1_UP_IRQHandler
+        SECTION .text:CODE:REORDER:NOROOT(1)
+TIM1_UP_IRQHandler
+        B TIM1_UP_IRQHandler
+
+        PUBWEAK TIM1_TRG_COM_IRQHandler
+        SECTION .text:CODE:REORDER:NOROOT(1)
+TIM1_TRG_COM_IRQHandler
+        B TIM1_TRG_COM_IRQHandler
+
+        PUBWEAK TIM1_CC_IRQHandler
+        SECTION .text:CODE:REORDER:NOROOT(1)
+TIM1_CC_IRQHandler
+        B TIM1_CC_IRQHandler
+
+        PUBWEAK TIM2_IRQHandler
+        SECTION .text:CODE:REORDER:NOROOT(1)
+TIM2_IRQHandler
+        B TIM2_IRQHandler
+
+        PUBWEAK TIM3_IRQHandler
+        SECTION .text:CODE:REORDER:NOROOT(1)
+TIM3_IRQHandler
+        B TIM3_IRQHandler
+
+        PUBWEAK TIM4_IRQHandler
+        SECTION .text:CODE:REORDER:NOROOT(1)
+TIM4_IRQHandler
+        B TIM4_IRQHandler
+
+        PUBWEAK I2C1_EV_IRQHandler
+        SECTION .text:CODE:REORDER:NOROOT(1)
+I2C1_EV_IRQHandler
+        B I2C1_EV_IRQHandler
+
+        PUBWEAK I2C1_ER_IRQHandler
+        SECTION .text:CODE:REORDER:NOROOT(1)
+I2C1_ER_IRQHandler
+        B I2C1_ER_IRQHandler
+
+        PUBWEAK I2C2_EV_IRQHandler
+        SECTION .text:CODE:REORDER:NOROOT(1)
+I2C2_EV_IRQHandler
+        B I2C2_EV_IRQHandler
+
+        PUBWEAK I2C2_ER_IRQHandler
+        SECTION .text:CODE:REORDER:NOROOT(1)
+I2C2_ER_IRQHandler
+        B I2C2_ER_IRQHandler
+
+        PUBWEAK SPI1_IRQHandler
+        SECTION .text:CODE:REORDER:NOROOT(1)
+SPI1_IRQHandler
+        B SPI1_IRQHandler    
+
+        PUBWEAK SPI2_IRQHandler
+        SECTION .text:CODE:REORDER:NOROOT(1)
+SPI2_IRQHandler
+        B SPI2_IRQHandler
+
+        PUBWEAK USART1_IRQHandler
+        SECTION .text:CODE:REORDER:NOROOT(1)
+USART1_IRQHandler
+        B USART1_IRQHandler
+
+        PUBWEAK USART2_IRQHandler
+        SECTION .text:CODE:REORDER:NOROOT(1)
+USART2_IRQHandler
+        B USART2_IRQHandler
+
+        PUBWEAK USART3_IRQHandler
+        SECTION .text:CODE:REORDER:NOROOT(1)
+USART3_IRQHandler
+        B USART3_IRQHandler
+
+        PUBWEAK EXTI15_10_IRQHandler
+        SECTION .text:CODE:REORDER:NOROOT(1)
+EXTI15_10_IRQHandler
+        B EXTI15_10_IRQHandler
+
+        PUBWEAK RTC_Alarm_IRQHandler
+        SECTION .text:CODE:REORDER:NOROOT(1)
+RTC_Alarm_IRQHandler
+        B RTC_Alarm_IRQHandler
+
+        PUBWEAK OTG_FS_WKUP_IRQHandler
+        SECTION .text:CODE:REORDER:NOROOT(1)
+OTG_FS_WKUP_IRQHandler
+        B OTG_FS_WKUP_IRQHandler
+
+        PUBWEAK TIM5_IRQHandler
+        SECTION .text:CODE:REORDER:NOROOT(1)
+TIM5_IRQHandler
+        B TIM5_IRQHandler
+
+        PUBWEAK SPI3_IRQHandler
+        SECTION .text:CODE:REORDER:NOROOT(1)
+SPI3_IRQHandler
+        B SPI3_IRQHandler
+
+        PUBWEAK UART4_IRQHandler
+        SECTION .text:CODE:REORDER:NOROOT(1)
+UART4_IRQHandler
+        B UART4_IRQHandler
+
+        PUBWEAK UART5_IRQHandler
+        SECTION .text:CODE:REORDER:NOROOT(1)
+UART5_IRQHandler
+        B UART5_IRQHandler
+
+        PUBWEAK TIM6_IRQHandler
+        SECTION .text:CODE:REORDER:NOROOT(1)
+TIM6_IRQHandler
+        B TIM6_IRQHandler
+
+        PUBWEAK TIM7_IRQHandler
+        SECTION .text:CODE:REORDER:NOROOT(1)
+TIM7_IRQHandler
+        B TIM7_IRQHandler
+
+        PUBWEAK DMA2_Channel1_IRQHandler
+        SECTION .text:CODE:REORDER:NOROOT(1)
+DMA2_Channel1_IRQHandler
+        B DMA2_Channel1_IRQHandler
+
+        PUBWEAK DMA2_Channel2_IRQHandler
+        SECTION .text:CODE:REORDER:NOROOT(1)
+DMA2_Channel2_IRQHandler
+        B DMA2_Channel2_IRQHandler
+
+        PUBWEAK DMA2_Channel3_IRQHandler
+        SECTION .text:CODE:REORDER:NOROOT(1)
+DMA2_Channel3_IRQHandler
+        B DMA2_Channel3_IRQHandler
+
+        PUBWEAK DMA2_Channel4_IRQHandler
+        SECTION .text:CODE:REORDER:NOROOT(1)
+DMA2_Channel4_IRQHandler
+        B DMA2_Channel4_IRQHandler
+
+        PUBWEAK DMA2_Channel5_IRQHandler
+        SECTION .text:CODE:REORDER:NOROOT(1)
+DMA2_Channel5_IRQHandler
+        B DMA2_Channel5_IRQHandler
+
+        PUBWEAK ETH_IRQHandler
+        SECTION .text:CODE:REORDER:NOROOT(1)
+ETH_IRQHandler
+        B ETH_IRQHandler
+
+        PUBWEAK ETH_WKUP_IRQHandler
+        SECTION .text:CODE:REORDER:NOROOT(1)
+ETH_WKUP_IRQHandler
+        B ETH_WKUP_IRQHandler
+
+        PUBWEAK CAN2_TX_IRQHandler
+        SECTION .text:CODE:REORDER:NOROOT(1)
+CAN2_TX_IRQHandler
+        B CAN2_TX_IRQHandler
+
+        PUBWEAK CAN2_RX0_IRQHandler
+        SECTION .text:CODE:REORDER:NOROOT(1)
+CAN2_RX0_IRQHandler
+        B CAN2_RX0_IRQHandler
+
+        PUBWEAK CAN2_RX1_IRQHandler
+        SECTION .text:CODE:REORDER:NOROOT(1)
+CAN2_RX1_IRQHandler
+        B CAN2_RX1_IRQHandler
+
+        PUBWEAK CAN2_SCE_IRQHandler
+        SECTION .text:CODE:REORDER:NOROOT(1)
+CAN2_SCE_IRQHandler
+        B CAN2_SCE_IRQHandler
+
+        PUBWEAK OTG_FS_IRQHandler
+        SECTION .text:CODE:REORDER:NOROOT(1)
+OTG_FS_IRQHandler
+        B OTG_FS_IRQHandler
+
+        END
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

bsp/stm32f10x_HAL/Libraries/CMSIS/Device/ST/STM32F1xx/Source/Templates/system_stm32f1xx.c

@@ -0,0 +1,448 @@
+/**
+  ******************************************************************************
+  * @file    system_stm32f1xx.c
+  * @author  MCD Application Team
+  * @version V4.2.0
+  * @date    31-March-2017
+  * @brief   CMSIS Cortex-M3 Device Peripheral Access Layer System Source File.
+  * 
+  * 1.  This file provides two functions and one global variable to be called from 
+  *     user application:
+  *      - SystemInit(): Setups the system clock (System clock source, PLL Multiplier
+  *                      factors, AHB/APBx prescalers and Flash settings). 
+  *                      This function is called at startup just after reset and 
+  *                      before branch to main program. This call is made inside
+  *                      the "startup_stm32f1xx_xx.s" file.
+  *
+  *      - SystemCoreClock variable: Contains the core clock (HCLK), it can be used
+  *                                  by the user application to setup the SysTick 
+  *                                  timer or configure other parameters.
+  *                                     
+  *      - SystemCoreClockUpdate(): Updates the variable SystemCoreClock and must
+  *                                 be called whenever the core clock is changed
+  *                                 during program execution.
+  *
+  * 2. After each device reset the HSI (8 MHz) is used as system clock source.
+  *    Then SystemInit() function is called, in "startup_stm32f1xx_xx.s" file, to
+  *    configure the system clock before to branch to main program.
+  *
+  * 4. The default value of HSE crystal is set to 8 MHz (or 25 MHz, depending on
+  *    the product used), refer to "HSE_VALUE". 
+  *    When HSE is used as system clock source, directly or through PLL, and you
+  *    are using different crystal you have to adapt the HSE value to your own
+  *    configuration.
+  *        
+  ******************************************************************************
+  * @attention
+  *
+  * <h2><center>&copy; COPYRIGHT(c) 2017 STMicroelectronics</center></h2>
+  *
+  * Redistribution and use in source and binary forms, with or without modification,
+  * are permitted provided that the following conditions are met:
+  *   1. Redistributions of source code must retain the above copyright notice,
+  *      this list of conditions and the following disclaimer.
+  *   2. Redistributions in binary form must reproduce the above copyright notice,
+  *      this list of conditions and the following disclaimer in the documentation
+  *      and/or other materials provided with the distribution.
+  *   3. Neither the name of STMicroelectronics nor the names of its contributors
+  *      may be used to endorse or promote products derived from this software
+  *      without specific prior written permission.
+  *
+  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+  * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+  * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+  * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+  * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+  * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+  * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+  *
+  ******************************************************************************
+  */
+
+/** @addtogroup CMSIS
+  * @{
+  */
+
+/** @addtogroup stm32f1xx_system
+  * @{
+  */  
+  
+/** @addtogroup STM32F1xx_System_Private_Includes
+  * @{
+  */
+
+#include "stm32f1xx.h"
+
+/**
+  * @}
+  */
+
+/** @addtogroup STM32F1xx_System_Private_TypesDefinitions
+  * @{
+  */
+
+/**
+  * @}
+  */
+
+/** @addtogroup STM32F1xx_System_Private_Defines
+  * @{
+  */
+
+#if !defined  (HSE_VALUE) 
+  #define HSE_VALUE               8000000U /*!< Default value of the External oscillator in Hz.
+                                                This value can be provided and adapted by the user application. */
+#endif /* HSE_VALUE */
+
+#if !defined  (HSI_VALUE)
+  #define HSI_VALUE               8000000U /*!< Default value of the Internal oscillator in Hz.
+                                                This value can be provided and adapted by the user application. */
+#endif /* HSI_VALUE */
+
+/*!< Uncomment the following line if you need to use external SRAM  */ 
+#if defined(STM32F100xE) || defined(STM32F101xE) || defined(STM32F101xG) || defined(STM32F103xE) || defined(STM32F103xG)
+/* #define DATA_IN_ExtSRAM */
+#endif /* STM32F100xE || STM32F101xE || STM32F101xG || STM32F103xE || STM32F103xG */
+
+/*!< Uncomment the following line if you need to relocate your vector Table in
+     Internal SRAM. */ 
+/* #define VECT_TAB_SRAM */
+#define VECT_TAB_OFFSET  0x00000000U /*!< Vector Table base offset field. 
+                                  This value must be a multiple of 0x200. */
+
+
+/**
+  * @}
+  */
+
+/** @addtogroup STM32F1xx_System_Private_Macros
+  * @{
+  */
+
+/**
+  * @}
+  */
+
+/** @addtogroup STM32F1xx_System_Private_Variables
+  * @{
+  */
+
+/*******************************************************************************
+*  Clock Definitions
+*******************************************************************************/
+#if defined(STM32F100xB) ||defined(STM32F100xE)
+  uint32_t SystemCoreClock         = 24000000U;        /*!< System Clock Frequency (Core Clock) */
+#else /*!< HSI Selected as System Clock source */
+  uint32_t SystemCoreClock         = 72000000U;        /*!< System Clock Frequency (Core Clock) */
+#endif
+
+const uint8_t AHBPrescTable[16U] = {0, 0, 0, 0, 0, 0, 0, 0, 1, 2, 3, 4, 6, 7, 8, 9};
+const uint8_t APBPrescTable[8U] =  {0, 0, 0, 0, 1, 2, 3, 4};
+
+/**
+  * @}
+  */
+
+/** @addtogroup STM32F1xx_System_Private_FunctionPrototypes
+  * @{
+  */
+
+#if defined(STM32F100xE) || defined(STM32F101xE) || defined(STM32F101xG) || defined(STM32F103xE) || defined(STM32F103xG)
+#ifdef DATA_IN_ExtSRAM
+  static void SystemInit_ExtMemCtl(void); 
+#endif /* DATA_IN_ExtSRAM */
+#endif /* STM32F100xE || STM32F101xE || STM32F101xG || STM32F103xE || STM32F103xG */
+
+/**
+  * @}
+  */
+
+/** @addtogroup STM32F1xx_System_Private_Functions
+  * @{
+  */
+
+/**
+  * @brief  Setup the microcontroller system
+  *         Initialize the Embedded Flash Interface, the PLL and update the 
+  *         SystemCoreClock variable.
+  * @note   This function should be used only after reset.
+  * @param  None
+  * @retval None
+  */
+void SystemInit (void)
+{
+  /* Reset the RCC clock configuration to the default reset state(for debug purpose) */
+  /* Set HSION bit */
+  RCC->CR |= 0x00000001U;
+
+  /* Reset SW, HPRE, PPRE1, PPRE2, ADCPRE and MCO bits */
+#if !defined(STM32F105xC) && !defined(STM32F107xC)
+  RCC->CFGR &= 0xF8FF0000U;
+#else
+  RCC->CFGR &= 0xF0FF0000U;
+#endif /* STM32F105xC */   
+  
+  /* Reset HSEON, CSSON and PLLON bits */
+  RCC->CR &= 0xFEF6FFFFU;
+
+  /* Reset HSEBYP bit */
+  RCC->CR &= 0xFFFBFFFFU;
+
+  /* Reset PLLSRC, PLLXTPRE, PLLMUL and USBPRE/OTGFSPRE bits */
+  RCC->CFGR &= 0xFF80FFFFU;
+
+#if defined(STM32F105xC) || defined(STM32F107xC)
+  /* Reset PLL2ON and PLL3ON bits */
+  RCC->CR &= 0xEBFFFFFFU;
+
+  /* Disable all interrupts and clear pending bits  */
+  RCC->CIR = 0x00FF0000U;
+
+  /* Reset CFGR2 register */
+  RCC->CFGR2 = 0x00000000U;
+#elif defined(STM32F100xB) || defined(STM32F100xE)
+  /* Disable all interrupts and clear pending bits  */
+  RCC->CIR = 0x009F0000U;
+
+  /* Reset CFGR2 register */
+  RCC->CFGR2 = 0x00000000U;      
+#else
+  /* Disable all interrupts and clear pending bits  */
+  RCC->CIR = 0x009F0000U;
+#endif /* STM32F105xC */
+    
+#if defined(STM32F100xE) || defined(STM32F101xE) || defined(STM32F101xG) || defined(STM32F103xE) || defined(STM32F103xG)
+  #ifdef DATA_IN_ExtSRAM
+    SystemInit_ExtMemCtl(); 
+  #endif /* DATA_IN_ExtSRAM */
+#endif 
+
+#ifdef VECT_TAB_SRAM
+  SCB->VTOR = SRAM_BASE | VECT_TAB_OFFSET; /* Vector Table Relocation in Internal SRAM. */
+#else
+  SCB->VTOR = FLASH_BASE | VECT_TAB_OFFSET; /* Vector Table Relocation in Internal FLASH. */
+#endif 
+}
+
+/**
+  * @brief  Update SystemCoreClock variable according to Clock Register Values.
+  *         The SystemCoreClock variable contains the core clock (HCLK), it can
+  *         be used by the user application to setup the SysTick timer or configure
+  *         other parameters.
+  *           
+  * @note   Each time the core clock (HCLK) changes, this function must be called
+  *         to update SystemCoreClock variable value. Otherwise, any configuration
+  *         based on this variable will be incorrect.         
+  *     
+  * @note   - The system frequency computed by this function is not the real 
+  *           frequency in the chip. It is calculated based on the predefined 
+  *           constant and the selected clock source:
+  *             
+  *           - If SYSCLK source is HSI, SystemCoreClock will contain the HSI_VALUE(*)
+  *                                              
+  *           - If SYSCLK source is HSE, SystemCoreClock will contain the HSE_VALUE(**)
+  *                          
+  *           - If SYSCLK source is PLL, SystemCoreClock will contain the HSE_VALUE(**) 
+  *             or HSI_VALUE(*) multiplied by the PLL factors.
+  *         
+  *         (*) HSI_VALUE is a constant defined in stm32f1xx.h file (default value
+  *             8 MHz) but the real value may vary depending on the variations
+  *             in voltage and temperature.   
+  *    
+  *         (**) HSE_VALUE is a constant defined in stm32f1xx.h file (default value
+  *              8 MHz or 25 MHz, depending on the product used), user has to ensure
+  *              that HSE_VALUE is same as the real frequency of the crystal used.
+  *              Otherwise, this function may have wrong result.
+  *                
+  *         - The result of this function could be not correct when using fractional
+  *           value for HSE crystal.
+  * @param  None
+  * @retval None
+  */
+void SystemCoreClockUpdate (void)
+{
+  uint32_t tmp = 0U, pllmull = 0U, pllsource = 0U;
+
+#if defined(STM32F105xC) || defined(STM32F107xC)
+  uint32_t prediv1source = 0U, prediv1factor = 0U, prediv2factor = 0U, pll2mull = 0U;
+#endif /* STM32F105xC */
+
+#if defined(STM32F100xB) || defined(STM32F100xE)
+  uint32_t prediv1factor = 0U;
+#endif /* STM32F100xB or STM32F100xE */
+    
+  /* Get SYSCLK source -------------------------------------------------------*/
+  tmp = RCC->CFGR & RCC_CFGR_SWS;
+  
+  switch (tmp)
+  {
+    case 0x00U:  /* HSI used as system clock */
+      SystemCoreClock = HSI_VALUE;
+      break;
+    case 0x04U:  /* HSE used as system clock */
+      SystemCoreClock = HSE_VALUE;
+      break;
+    case 0x08U:  /* PLL used as system clock */
+
+      /* Get PLL clock source and multiplication factor ----------------------*/
+      pllmull = RCC->CFGR & RCC_CFGR_PLLMULL;
+      pllsource = RCC->CFGR & RCC_CFGR_PLLSRC;
+      
+#if !defined(STM32F105xC) && !defined(STM32F107xC)      
+      pllmull = ( pllmull >> 18U) + 2U;
+      
+      if (pllsource == 0x00U)
+      {
+        /* HSI oscillator clock divided by 2 selected as PLL clock entry */
+        SystemCoreClock = (HSI_VALUE >> 1U) * pllmull;
+      }
+      else
+      {
+ #if defined(STM32F100xB) || defined(STM32F100xE)
+       prediv1factor = (RCC->CFGR2 & RCC_CFGR2_PREDIV1) + 1U;
+       /* HSE oscillator clock selected as PREDIV1 clock entry */
+       SystemCoreClock = (HSE_VALUE / prediv1factor) * pllmull; 
+ #else
+        /* HSE selected as PLL clock entry */
+        if ((RCC->CFGR & RCC_CFGR_PLLXTPRE) != (uint32_t)RESET)
+        {/* HSE oscillator clock divided by 2 */
+          SystemCoreClock = (HSE_VALUE >> 1U) * pllmull;
+        }
+        else
+        {
+          SystemCoreClock = HSE_VALUE * pllmull;
+        }
+ #endif
+      }
+#else
+      pllmull = pllmull >> 18U;
+      
+      if (pllmull != 0x0DU)
+      {
+         pllmull += 2U;
+      }
+      else
+      { /* PLL multiplication factor = PLL input clock * 6.5 */
+        pllmull = 13U / 2U; 
+      }
+            
+      if (pllsource == 0x00U)
+      {
+        /* HSI oscillator clock divided by 2 selected as PLL clock entry */
+        SystemCoreClock = (HSI_VALUE >> 1U) * pllmull;
+      }
+      else
+      {/* PREDIV1 selected as PLL clock entry */
+        
+        /* Get PREDIV1 clock source and division factor */
+        prediv1source = RCC->CFGR2 & RCC_CFGR2_PREDIV1SRC;
+        prediv1factor = (RCC->CFGR2 & RCC_CFGR2_PREDIV1) + 1U;
+        
+        if (prediv1source == 0U)
+        { 
+          /* HSE oscillator clock selected as PREDIV1 clock entry */
+          SystemCoreClock = (HSE_VALUE / prediv1factor) * pllmull;          
+        }
+        else
+        {/* PLL2 clock selected as PREDIV1 clock entry */
+          
+          /* Get PREDIV2 division factor and PLL2 multiplication factor */
+          prediv2factor = ((RCC->CFGR2 & RCC_CFGR2_PREDIV2) >> 4U) + 1U;
+          pll2mull = ((RCC->CFGR2 & RCC_CFGR2_PLL2MUL) >> 8U) + 2U; 
+          SystemCoreClock = (((HSE_VALUE / prediv2factor) * pll2mull) / prediv1factor) * pllmull;                         
+        }
+      }
+#endif /* STM32F105xC */ 
+      break;
+
+    default:
+      SystemCoreClock = HSI_VALUE;
+      break;
+  }
+  
+  /* Compute HCLK clock frequency ----------------*/
+  /* Get HCLK prescaler */
+  tmp = AHBPrescTable[((RCC->CFGR & RCC_CFGR_HPRE) >> 4U)];
+  /* HCLK clock frequency */
+  SystemCoreClock >>= tmp;  
+}
+
+#if defined(STM32F100xE) || defined(STM32F101xE) || defined(STM32F101xG) || defined(STM32F103xE) || defined(STM32F103xG)
+/**
+  * @brief  Setup the external memory controller. Called in startup_stm32f1xx.s 
+  *          before jump to __main
+  * @param  None
+  * @retval None
+  */ 
+#ifdef DATA_IN_ExtSRAM
+/**
+  * @brief  Setup the external memory controller. 
+  *         Called in startup_stm32f1xx_xx.s/.c before jump to main.
+  *         This function configures the external SRAM mounted on STM3210E-EVAL
+  *         board (STM32 High density devices). This SRAM will be used as program
+  *         data memory (including heap and stack).
+  * @param  None
+  * @retval None
+  */ 
+void SystemInit_ExtMemCtl(void) 
+{
+  __IO uint32_t tmpreg;
+  /*!< FSMC Bank1 NOR/SRAM3 is used for the STM3210E-EVAL, if another Bank is 
+    required, then adjust the Register Addresses */
+
+  /* Enable FSMC clock */
+  RCC->AHBENR = 0x00000114U;
+
+  /* Delay after an RCC peripheral clock enabling */
+  tmpreg = READ_BIT(RCC->AHBENR, RCC_AHBENR_FSMCEN);
+  
+  /* Enable GPIOD, GPIOE, GPIOF and GPIOG clocks */
+  RCC->APB2ENR = 0x000001E0U;
+  
+  /* Delay after an RCC peripheral clock enabling */
+  tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_IOPDEN);
+
+  (void)(tmpreg);
+  
+/* ---------------  SRAM Data lines, NOE and NWE configuration ---------------*/
+/*----------------  SRAM Address lines configuration -------------------------*/
+/*----------------  NOE and NWE configuration --------------------------------*/  
+/*----------------  NE3 configuration ----------------------------------------*/
+/*----------------  NBL0, NBL1 configuration ---------------------------------*/
+  
+  GPIOD->CRL = 0x44BB44BBU;  
+  GPIOD->CRH = 0xBBBBBBBBU;
+
+  GPIOE->CRL = 0xB44444BBU;  
+  GPIOE->CRH = 0xBBBBBBBBU;
+
+  GPIOF->CRL = 0x44BBBBBBU;  
+  GPIOF->CRH = 0xBBBB4444U;
+
+  GPIOG->CRL = 0x44BBBBBBU;  
+  GPIOG->CRH = 0x444B4B44U;
+   
+/*----------------  FSMC Configuration ---------------------------------------*/  
+/*----------------  Enable FSMC Bank1_SRAM Bank ------------------------------*/
+  
+  FSMC_Bank1->BTCR[4U] = 0x00001091U;
+  FSMC_Bank1->BTCR[5U] = 0x00110212U;
+}
+#endif /* DATA_IN_ExtSRAM */
+#endif /* STM32F100xE || STM32F101xE || STM32F101xG || STM32F103xE || STM32F103xG */
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+  
+/**
+  * @}
+  */    
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

bsp/stm32f10x_HAL/Libraries/CMSIS/Include/arm_common_tables.h

@@ -0,0 +1,136 @@
+/* ----------------------------------------------------------------------
+* Copyright (C) 2010-2014 ARM Limited. All rights reserved.
+*
+* $Date:        19. October 2015
+* $Revision: 	V.1.4.5 a
+*
+* Project: 	    CMSIS DSP Library
+* Title:	    arm_common_tables.h
+*
+* Description:	This file has extern declaration for common tables like Bitreverse, reciprocal etc which are used across different functions
+*
+* Target Processor: Cortex-M4/Cortex-M3
+*
+* Redistribution and use in source and binary forms, with or without
+* modification, are permitted provided that the following conditions
+* are met:
+*   - Redistributions of source code must retain the above copyright
+*     notice, this list of conditions and the following disclaimer.
+*   - Redistributions in binary form must reproduce the above copyright
+*     notice, this list of conditions and the following disclaimer in
+*     the documentation and/or other materials provided with the
+*     distribution.
+*   - Neither the name of ARM LIMITED nor the names of its contributors
+*     may be used to endorse or promote products derived from this
+*     software without specific prior written permission.
+*
+* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+* POSSIBILITY OF SUCH DAMAGE.
+* -------------------------------------------------------------------- */
+
+#ifndef _ARM_COMMON_TABLES_H
+#define _ARM_COMMON_TABLES_H
+
+#include "arm_math.h"
+
+extern const uint16_t armBitRevTable[1024];
+extern const q15_t armRecipTableQ15[64];
+extern const q31_t armRecipTableQ31[64];
+/* extern const q31_t realCoefAQ31[1024]; */
+/* extern const q31_t realCoefBQ31[1024]; */
+extern const float32_t twiddleCoef_16[32];
+extern const float32_t twiddleCoef_32[64];
+extern const float32_t twiddleCoef_64[128];
+extern const float32_t twiddleCoef_128[256];
+extern const float32_t twiddleCoef_256[512];
+extern const float32_t twiddleCoef_512[1024];
+extern const float32_t twiddleCoef_1024[2048];
+extern const float32_t twiddleCoef_2048[4096];
+extern const float32_t twiddleCoef_4096[8192];
+#define twiddleCoef twiddleCoef_4096
+extern const q31_t twiddleCoef_16_q31[24];
+extern const q31_t twiddleCoef_32_q31[48];
+extern const q31_t twiddleCoef_64_q31[96];
+extern const q31_t twiddleCoef_128_q31[192];
+extern const q31_t twiddleCoef_256_q31[384];
+extern const q31_t twiddleCoef_512_q31[768];
+extern const q31_t twiddleCoef_1024_q31[1536];
+extern const q31_t twiddleCoef_2048_q31[3072];
+extern const q31_t twiddleCoef_4096_q31[6144];
+extern const q15_t twiddleCoef_16_q15[24];
+extern const q15_t twiddleCoef_32_q15[48];
+extern const q15_t twiddleCoef_64_q15[96];
+extern const q15_t twiddleCoef_128_q15[192];
+extern const q15_t twiddleCoef_256_q15[384];
+extern const q15_t twiddleCoef_512_q15[768];
+extern const q15_t twiddleCoef_1024_q15[1536];
+extern const q15_t twiddleCoef_2048_q15[3072];
+extern const q15_t twiddleCoef_4096_q15[6144];
+extern const float32_t twiddleCoef_rfft_32[32];
+extern const float32_t twiddleCoef_rfft_64[64];
+extern const float32_t twiddleCoef_rfft_128[128];
+extern const float32_t twiddleCoef_rfft_256[256];
+extern const float32_t twiddleCoef_rfft_512[512];
+extern const float32_t twiddleCoef_rfft_1024[1024];
+extern const float32_t twiddleCoef_rfft_2048[2048];
+extern const float32_t twiddleCoef_rfft_4096[4096];
+
+
+/* floating-point bit reversal tables */
+#define ARMBITREVINDEXTABLE__16_TABLE_LENGTH ((uint16_t)20  )
+#define ARMBITREVINDEXTABLE__32_TABLE_LENGTH ((uint16_t)48  )
+#define ARMBITREVINDEXTABLE__64_TABLE_LENGTH ((uint16_t)56  )
+#define ARMBITREVINDEXTABLE_128_TABLE_LENGTH ((uint16_t)208 )
+#define ARMBITREVINDEXTABLE_256_TABLE_LENGTH ((uint16_t)440 )
+#define ARMBITREVINDEXTABLE_512_TABLE_LENGTH ((uint16_t)448 )
+#define ARMBITREVINDEXTABLE1024_TABLE_LENGTH ((uint16_t)1800)
+#define ARMBITREVINDEXTABLE2048_TABLE_LENGTH ((uint16_t)3808)
+#define ARMBITREVINDEXTABLE4096_TABLE_LENGTH ((uint16_t)4032)
+
+extern const uint16_t armBitRevIndexTable16[ARMBITREVINDEXTABLE__16_TABLE_LENGTH];
+extern const uint16_t armBitRevIndexTable32[ARMBITREVINDEXTABLE__32_TABLE_LENGTH];
+extern const uint16_t armBitRevIndexTable64[ARMBITREVINDEXTABLE__64_TABLE_LENGTH];
+extern const uint16_t armBitRevIndexTable128[ARMBITREVINDEXTABLE_128_TABLE_LENGTH];
+extern const uint16_t armBitRevIndexTable256[ARMBITREVINDEXTABLE_256_TABLE_LENGTH];
+extern const uint16_t armBitRevIndexTable512[ARMBITREVINDEXTABLE_512_TABLE_LENGTH];
+extern const uint16_t armBitRevIndexTable1024[ARMBITREVINDEXTABLE1024_TABLE_LENGTH];
+extern const uint16_t armBitRevIndexTable2048[ARMBITREVINDEXTABLE2048_TABLE_LENGTH];
+extern const uint16_t armBitRevIndexTable4096[ARMBITREVINDEXTABLE4096_TABLE_LENGTH];
+
+/* fixed-point bit reversal tables */
+#define ARMBITREVINDEXTABLE_FIXED___16_TABLE_LENGTH ((uint16_t)12  )
+#define ARMBITREVINDEXTABLE_FIXED___32_TABLE_LENGTH ((uint16_t)24  )
+#define ARMBITREVINDEXTABLE_FIXED___64_TABLE_LENGTH ((uint16_t)56  )
+#define ARMBITREVINDEXTABLE_FIXED__128_TABLE_LENGTH ((uint16_t)112 )
+#define ARMBITREVINDEXTABLE_FIXED__256_TABLE_LENGTH ((uint16_t)240 )
+#define ARMBITREVINDEXTABLE_FIXED__512_TABLE_LENGTH ((uint16_t)480 )
+#define ARMBITREVINDEXTABLE_FIXED_1024_TABLE_LENGTH ((uint16_t)992 )
+#define ARMBITREVINDEXTABLE_FIXED_2048_TABLE_LENGTH ((uint16_t)1984)
+#define ARMBITREVINDEXTABLE_FIXED_4096_TABLE_LENGTH ((uint16_t)4032)
+
+extern const uint16_t armBitRevIndexTable_fixed_16[ARMBITREVINDEXTABLE_FIXED___16_TABLE_LENGTH];
+extern const uint16_t armBitRevIndexTable_fixed_32[ARMBITREVINDEXTABLE_FIXED___32_TABLE_LENGTH];
+extern const uint16_t armBitRevIndexTable_fixed_64[ARMBITREVINDEXTABLE_FIXED___64_TABLE_LENGTH];
+extern const uint16_t armBitRevIndexTable_fixed_128[ARMBITREVINDEXTABLE_FIXED__128_TABLE_LENGTH];
+extern const uint16_t armBitRevIndexTable_fixed_256[ARMBITREVINDEXTABLE_FIXED__256_TABLE_LENGTH];
+extern const uint16_t armBitRevIndexTable_fixed_512[ARMBITREVINDEXTABLE_FIXED__512_TABLE_LENGTH];
+extern const uint16_t armBitRevIndexTable_fixed_1024[ARMBITREVINDEXTABLE_FIXED_1024_TABLE_LENGTH];
+extern const uint16_t armBitRevIndexTable_fixed_2048[ARMBITREVINDEXTABLE_FIXED_2048_TABLE_LENGTH];
+extern const uint16_t armBitRevIndexTable_fixed_4096[ARMBITREVINDEXTABLE_FIXED_4096_TABLE_LENGTH];
+
+/* Tables for Fast Math Sine and Cosine */
+extern const float32_t sinTable_f32[FAST_MATH_TABLE_SIZE + 1];
+extern const q31_t sinTable_q31[FAST_MATH_TABLE_SIZE + 1];
+extern const q15_t sinTable_q15[FAST_MATH_TABLE_SIZE + 1];
+
+#endif /*  ARM_COMMON_TABLES_H */

bsp/stm32f10x_HAL/Libraries/CMSIS/Include/arm_const_structs.h

@@ -0,0 +1,79 @@
+/* ----------------------------------------------------------------------
+* Copyright (C) 2010-2014 ARM Limited. All rights reserved.
+*
+* $Date:        19. March 2015
+* $Revision: 	V.1.4.5
+*
+* Project: 	    CMSIS DSP Library
+* Title:	    arm_const_structs.h
+*
+* Description:	This file has constant structs that are initialized for
+*              user convenience.  For example, some can be given as
+*              arguments to the arm_cfft_f32() function.
+*
+* Target Processor: Cortex-M4/Cortex-M3
+*
+* Redistribution and use in source and binary forms, with or without
+* modification, are permitted provided that the following conditions
+* are met:
+*   - Redistributions of source code must retain the above copyright
+*     notice, this list of conditions and the following disclaimer.
+*   - Redistributions in binary form must reproduce the above copyright
+*     notice, this list of conditions and the following disclaimer in
+*     the documentation and/or other materials provided with the
+*     distribution.
+*   - Neither the name of ARM LIMITED nor the names of its contributors
+*     may be used to endorse or promote products derived from this
+*     software without specific prior written permission.
+*
+* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+* POSSIBILITY OF SUCH DAMAGE.
+* -------------------------------------------------------------------- */
+
+#ifndef _ARM_CONST_STRUCTS_H
+#define _ARM_CONST_STRUCTS_H
+
+#include "arm_math.h"
+#include "arm_common_tables.h"
+
+   extern const arm_cfft_instance_f32 arm_cfft_sR_f32_len16;
+   extern const arm_cfft_instance_f32 arm_cfft_sR_f32_len32;
+   extern const arm_cfft_instance_f32 arm_cfft_sR_f32_len64;
+   extern const arm_cfft_instance_f32 arm_cfft_sR_f32_len128;
+   extern const arm_cfft_instance_f32 arm_cfft_sR_f32_len256;
+   extern const arm_cfft_instance_f32 arm_cfft_sR_f32_len512;
+   extern const arm_cfft_instance_f32 arm_cfft_sR_f32_len1024;
+   extern const arm_cfft_instance_f32 arm_cfft_sR_f32_len2048;
+   extern const arm_cfft_instance_f32 arm_cfft_sR_f32_len4096;
+
+   extern const arm_cfft_instance_q31 arm_cfft_sR_q31_len16;
+   extern const arm_cfft_instance_q31 arm_cfft_sR_q31_len32;
+   extern const arm_cfft_instance_q31 arm_cfft_sR_q31_len64;
+   extern const arm_cfft_instance_q31 arm_cfft_sR_q31_len128;
+   extern const arm_cfft_instance_q31 arm_cfft_sR_q31_len256;
+   extern const arm_cfft_instance_q31 arm_cfft_sR_q31_len512;
+   extern const arm_cfft_instance_q31 arm_cfft_sR_q31_len1024;
+   extern const arm_cfft_instance_q31 arm_cfft_sR_q31_len2048;
+   extern const arm_cfft_instance_q31 arm_cfft_sR_q31_len4096;
+
+   extern const arm_cfft_instance_q15 arm_cfft_sR_q15_len16;
+   extern const arm_cfft_instance_q15 arm_cfft_sR_q15_len32;
+   extern const arm_cfft_instance_q15 arm_cfft_sR_q15_len64;
+   extern const arm_cfft_instance_q15 arm_cfft_sR_q15_len128;
+   extern const arm_cfft_instance_q15 arm_cfft_sR_q15_len256;
+   extern const arm_cfft_instance_q15 arm_cfft_sR_q15_len512;
+   extern const arm_cfft_instance_q15 arm_cfft_sR_q15_len1024;
+   extern const arm_cfft_instance_q15 arm_cfft_sR_q15_len2048;
+   extern const arm_cfft_instance_q15 arm_cfft_sR_q15_len4096;
+
+#endif

bsp/stm32f10x_HAL/Libraries/CMSIS/Include/cmsis_armcc.h

@@ -0,0 +1,734 @@
+/**************************************************************************//**
+ * @file     cmsis_armcc.h
+ * @brief    CMSIS Cortex-M Core Function/Instruction Header File
+ * @version  V4.30
+ * @date     20. October 2015
+ ******************************************************************************/
+/* Copyright (c) 2009 - 2015 ARM LIMITED
+
+   All rights reserved.
+   Redistribution and use in source and binary forms, with or without
+   modification, are permitted provided that the following conditions are met:
+   - Redistributions of source code must retain the above copyright
+     notice, this list of conditions and the following disclaimer.
+   - Redistributions in binary form must reproduce the above copyright
+     notice, this list of conditions and the following disclaimer in the
+     documentation and/or other materials provided with the distribution.
+   - Neither the name of ARM nor the names of its contributors may be used
+     to endorse or promote products derived from this software without
+     specific prior written permission.
+   *
+   THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+   AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+   IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+   ARE DISCLAIMED. IN NO EVENT SHALL COPYRIGHT HOLDERS AND CONTRIBUTORS BE
+   LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+   CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+   SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+   INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+   CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+   ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+   POSSIBILITY OF SUCH DAMAGE.
+   ---------------------------------------------------------------------------*/
+
+
+#ifndef __CMSIS_ARMCC_H
+#define __CMSIS_ARMCC_H
+
+
+#if defined(__ARMCC_VERSION) && (__ARMCC_VERSION < 400677)
+  #error "Please use ARM Compiler Toolchain V4.0.677 or later!"
+#endif
+
+/* ###########################  Core Function Access  ########################### */
+/** \ingroup  CMSIS_Core_FunctionInterface
+    \defgroup CMSIS_Core_RegAccFunctions CMSIS Core Register Access Functions
+  @{
+ */
+
+/* intrinsic void __enable_irq();     */
+/* intrinsic void __disable_irq();    */
+
+/**
+  \brief   Get Control Register
+  \details Returns the content of the Control Register.
+  \return               Control Register value
+ */
+__STATIC_INLINE uint32_t __get_CONTROL(void)
+{
+  register uint32_t __regControl         __ASM("control");
+  return(__regControl);
+}
+
+
+/**
+  \brief   Set Control Register
+  \details Writes the given value to the Control Register.
+  \param [in]    control  Control Register value to set
+ */
+__STATIC_INLINE void __set_CONTROL(uint32_t control)
+{
+  register uint32_t __regControl         __ASM("control");
+  __regControl = control;
+}
+
+
+/**
+  \brief   Get IPSR Register
+  \details Returns the content of the IPSR Register.
+  \return               IPSR Register value
+ */
+__STATIC_INLINE uint32_t __get_IPSR(void)
+{
+  register uint32_t __regIPSR          __ASM("ipsr");
+  return(__regIPSR);
+}
+
+
+/**
+  \brief   Get APSR Register
+  \details Returns the content of the APSR Register.
+  \return               APSR Register value
+ */
+__STATIC_INLINE uint32_t __get_APSR(void)
+{
+  register uint32_t __regAPSR          __ASM("apsr");
+  return(__regAPSR);
+}
+
+
+/**
+  \brief   Get xPSR Register
+  \details Returns the content of the xPSR Register.
+  \return               xPSR Register value
+ */
+__STATIC_INLINE uint32_t __get_xPSR(void)
+{
+  register uint32_t __regXPSR          __ASM("xpsr");
+  return(__regXPSR);
+}
+
+
+/**
+  \brief   Get Process Stack Pointer
+  \details Returns the current value of the Process Stack Pointer (PSP).
+  \return               PSP Register value
+ */
+__STATIC_INLINE uint32_t __get_PSP(void)
+{
+  register uint32_t __regProcessStackPointer  __ASM("psp");
+  return(__regProcessStackPointer);
+}
+
+
+/**
+  \brief   Set Process Stack Pointer
+  \details Assigns the given value to the Process Stack Pointer (PSP).
+  \param [in]    topOfProcStack  Process Stack Pointer value to set
+ */
+__STATIC_INLINE void __set_PSP(uint32_t topOfProcStack)
+{
+  register uint32_t __regProcessStackPointer  __ASM("psp");
+  __regProcessStackPointer = topOfProcStack;
+}
+
+
+/**
+  \brief   Get Main Stack Pointer
+  \details Returns the current value of the Main Stack Pointer (MSP).
+  \return               MSP Register value
+ */
+__STATIC_INLINE uint32_t __get_MSP(void)
+{
+  register uint32_t __regMainStackPointer     __ASM("msp");
+  return(__regMainStackPointer);
+}
+
+
+/**
+  \brief   Set Main Stack Pointer
+  \details Assigns the given value to the Main Stack Pointer (MSP).
+  \param [in]    topOfMainStack  Main Stack Pointer value to set
+ */
+__STATIC_INLINE void __set_MSP(uint32_t topOfMainStack)
+{
+  register uint32_t __regMainStackPointer     __ASM("msp");
+  __regMainStackPointer = topOfMainStack;
+}
+
+
+/**
+  \brief   Get Priority Mask
+  \details Returns the current state of the priority mask bit from the Priority Mask Register.
+  \return               Priority Mask value
+ */
+__STATIC_INLINE uint32_t __get_PRIMASK(void)
+{
+  register uint32_t __regPriMask         __ASM("primask");
+  return(__regPriMask);
+}
+
+
+/**
+  \brief   Set Priority Mask
+  \details Assigns the given value to the Priority Mask Register.
+  \param [in]    priMask  Priority Mask
+ */
+__STATIC_INLINE void __set_PRIMASK(uint32_t priMask)
+{
+  register uint32_t __regPriMask         __ASM("primask");
+  __regPriMask = (priMask);
+}
+
+
+#if       (__CORTEX_M >= 0x03U) || (__CORTEX_SC >= 300U)
+
+/**
+  \brief   Enable FIQ
+  \details Enables FIQ interrupts by clearing the F-bit in the CPSR.
+           Can only be executed in Privileged modes.
+ */
+#define __enable_fault_irq                __enable_fiq
+
+
+/**
+  \brief   Disable FIQ
+  \details Disables FIQ interrupts by setting the F-bit in the CPSR.
+           Can only be executed in Privileged modes.
+ */
+#define __disable_fault_irq               __disable_fiq
+
+
+/**
+  \brief   Get Base Priority
+  \details Returns the current value of the Base Priority register.
+  \return               Base Priority register value
+ */
+__STATIC_INLINE uint32_t  __get_BASEPRI(void)
+{
+  register uint32_t __regBasePri         __ASM("basepri");
+  return(__regBasePri);
+}
+
+
+/**
+  \brief   Set Base Priority
+  \details Assigns the given value to the Base Priority register.
+  \param [in]    basePri  Base Priority value to set
+ */
+__STATIC_INLINE void __set_BASEPRI(uint32_t basePri)
+{
+  register uint32_t __regBasePri         __ASM("basepri");
+  __regBasePri = (basePri & 0xFFU);
+}
+
+
+/**
+  \brief   Set Base Priority with condition
+  \details Assigns the given value to the Base Priority register only if BASEPRI masking is disabled,
+           or the new value increases the BASEPRI priority level.
+  \param [in]    basePri  Base Priority value to set
+ */
+__STATIC_INLINE void __set_BASEPRI_MAX(uint32_t basePri)
+{
+  register uint32_t __regBasePriMax      __ASM("basepri_max");
+  __regBasePriMax = (basePri & 0xFFU);
+}
+
+
+/**
+  \brief   Get Fault Mask
+  \details Returns the current value of the Fault Mask register.
+  \return               Fault Mask register value
+ */
+__STATIC_INLINE uint32_t __get_FAULTMASK(void)
+{
+  register uint32_t __regFaultMask       __ASM("faultmask");
+  return(__regFaultMask);
+}
+
+
+/**
+  \brief   Set Fault Mask
+  \details Assigns the given value to the Fault Mask register.
+  \param [in]    faultMask  Fault Mask value to set
+ */
+__STATIC_INLINE void __set_FAULTMASK(uint32_t faultMask)
+{
+  register uint32_t __regFaultMask       __ASM("faultmask");
+  __regFaultMask = (faultMask & (uint32_t)1);
+}
+
+#endif /* (__CORTEX_M >= 0x03U) || (__CORTEX_SC >= 300U) */
+
+
+#if       (__CORTEX_M == 0x04U) || (__CORTEX_M == 0x07U)
+
+/**
+  \brief   Get FPSCR
+  \details Returns the current value of the Floating Point Status/Control register.
+  \return               Floating Point Status/Control register value
+ */
+__STATIC_INLINE uint32_t __get_FPSCR(void)
+{
+#if (__FPU_PRESENT == 1U) && (__FPU_USED == 1U)
+  register uint32_t __regfpscr         __ASM("fpscr");
+  return(__regfpscr);
+#else
+   return(0U);
+#endif
+}
+
+
+/**
+  \brief   Set FPSCR
+  \details Assigns the given value to the Floating Point Status/Control register.
+  \param [in]    fpscr  Floating Point Status/Control value to set
+ */
+__STATIC_INLINE void __set_FPSCR(uint32_t fpscr)
+{
+#if (__FPU_PRESENT == 1U) && (__FPU_USED == 1U)
+  register uint32_t __regfpscr         __ASM("fpscr");
+  __regfpscr = (fpscr);
+#endif
+}
+
+#endif /* (__CORTEX_M == 0x04U) || (__CORTEX_M == 0x07U) */
+
+
+
+/*@} end of CMSIS_Core_RegAccFunctions */
+
+
+/* ##########################  Core Instruction Access  ######################### */
+/** \defgroup CMSIS_Core_InstructionInterface CMSIS Core Instruction Interface
+  Access to dedicated instructions
+  @{
+*/
+
+/**
+  \brief   No Operation
+  \details No Operation does nothing. This instruction can be used for code alignment purposes.
+ */
+#define __NOP                             __nop
+
+
+/**
+  \brief   Wait For Interrupt
+  \details Wait For Interrupt is a hint instruction that suspends execution until one of a number of events occurs.
+ */
+#define __WFI                             __wfi
+
+
+/**
+  \brief   Wait For Event
+  \details Wait For Event is a hint instruction that permits the processor to enter
+           a low-power state until one of a number of events occurs.
+ */
+#define __WFE                             __wfe
+
+
+/**
+  \brief   Send Event
+  \details Send Event is a hint instruction. It causes an event to be signaled to the CPU.
+ */
+#define __SEV                             __sev
+
+
+/**
+  \brief   Instruction Synchronization Barrier
+  \details Instruction Synchronization Barrier flushes the pipeline in the processor,
+           so that all instructions following the ISB are fetched from cache or memory,
+           after the instruction has been completed.
+ */
+#define __ISB() do {\
+                   __schedule_barrier();\
+                   __isb(0xF);\
+                   __schedule_barrier();\
+                } while (0U)
+
+/**
+  \brief   Data Synchronization Barrier
+  \details Acts as a special kind of Data Memory Barrier.
+           It completes when all explicit memory accesses before this instruction complete.
+ */
+#define __DSB() do {\
+                   __schedule_barrier();\
+                   __dsb(0xF);\
+                   __schedule_barrier();\
+                } while (0U)
+
+/**
+  \brief   Data Memory Barrier
+  \details Ensures the apparent order of the explicit memory operations before
+           and after the instruction, without ensuring their completion.
+ */
+#define __DMB() do {\
+                   __schedule_barrier();\
+                   __dmb(0xF);\
+                   __schedule_barrier();\
+                } while (0U)
+
+/**
+  \brief   Reverse byte order (32 bit)
+  \details Reverses the byte order in integer value.
+  \param [in]    value  Value to reverse
+  \return               Reversed value
+ */
+#define __REV                             __rev
+
+
+/**
+  \brief   Reverse byte order (16 bit)
+  \details Reverses the byte order in two unsigned short values.
+  \param [in]    value  Value to reverse
+  \return               Reversed value
+ */
+#ifndef __NO_EMBEDDED_ASM
+__attribute__((section(".rev16_text"))) __STATIC_INLINE __ASM uint32_t __REV16(uint32_t value)
+{
+  rev16 r0, r0
+  bx lr
+}
+#endif
+
+/**
+  \brief   Reverse byte order in signed short value
+  \details Reverses the byte order in a signed short value with sign extension to integer.
+  \param [in]    value  Value to reverse
+  \return               Reversed value
+ */
+#ifndef __NO_EMBEDDED_ASM
+__attribute__((section(".revsh_text"))) __STATIC_INLINE __ASM int32_t __REVSH(int32_t value)
+{
+  revsh r0, r0
+  bx lr
+}
+#endif
+
+
+/**
+  \brief   Rotate Right in unsigned value (32 bit)
+  \details Rotate Right (immediate) provides the value of the contents of a register rotated by a variable number of bits.
+  \param [in]    value  Value to rotate
+  \param [in]    value  Number of Bits to rotate
+  \return               Rotated value
+ */
+#define __ROR                             __ror
+
+
+/**
+  \brief   Breakpoint
+  \details Causes the processor to enter Debug state.
+           Debug tools can use this to investigate system state when the instruction at a particular address is reached.
+  \param [in]    value  is ignored by the processor.
+                 If required, a debugger can use it to store additional information about the breakpoint.
+ */
+#define __BKPT(value)                       __breakpoint(value)
+
+
+/**
+  \brief   Reverse bit order of value
+  \details Reverses the bit order of the given value.
+  \param [in]    value  Value to reverse
+  \return               Reversed value
+ */
+#if       (__CORTEX_M >= 0x03U) || (__CORTEX_SC >= 300U)
+  #define __RBIT                          __rbit
+#else
+__attribute__((always_inline)) __STATIC_INLINE uint32_t __RBIT(uint32_t value)
+{
+  uint32_t result;
+  int32_t s = 4 /*sizeof(v)*/ * 8 - 1; /* extra shift needed at end */
+
+  result = value;                      /* r will be reversed bits of v; first get LSB of v */
+  for (value >>= 1U; value; value >>= 1U)
+  {
+    result <<= 1U;
+    result |= value & 1U;
+    s--;
+  }
+  result <<= s;                        /* shift when v's highest bits are zero */
+  return(result);
+}
+#endif
+
+
+/**
+  \brief   Count leading zeros
+  \details Counts the number of leading zeros of a data value.
+  \param [in]  value  Value to count the leading zeros
+  \return             number of leading zeros in value
+ */
+#define __CLZ                             __clz
+
+
+#if       (__CORTEX_M >= 0x03U) || (__CORTEX_SC >= 300U)
+
+/**
+  \brief   LDR Exclusive (8 bit)
+  \details Executes a exclusive LDR instruction for 8 bit value.
+  \param [in]    ptr  Pointer to data
+  \return             value of type uint8_t at (*ptr)
+ */
+#if defined(__ARMCC_VERSION) && (__ARMCC_VERSION < 5060020)
+  #define __LDREXB(ptr)                                                        ((uint8_t ) __ldrex(ptr))
+#else
+  #define __LDREXB(ptr)          _Pragma("push") _Pragma("diag_suppress 3731") ((uint8_t ) __ldrex(ptr))  _Pragma("pop")
+#endif
+
+
+/**
+  \brief   LDR Exclusive (16 bit)
+  \details Executes a exclusive LDR instruction for 16 bit values.
+  \param [in]    ptr  Pointer to data
+  \return        value of type uint16_t at (*ptr)
+ */
+#if defined(__ARMCC_VERSION) && (__ARMCC_VERSION < 5060020)
+  #define __LDREXH(ptr)                                                        ((uint16_t) __ldrex(ptr))
+#else
+  #define __LDREXH(ptr)          _Pragma("push") _Pragma("diag_suppress 3731") ((uint16_t) __ldrex(ptr))  _Pragma("pop")
+#endif
+
+
+/**
+  \brief   LDR Exclusive (32 bit)
+  \details Executes a exclusive LDR instruction for 32 bit values.
+  \param [in]    ptr  Pointer to data
+  \return        value of type uint32_t at (*ptr)
+ */
+#if defined(__ARMCC_VERSION) && (__ARMCC_VERSION < 5060020)
+  #define __LDREXW(ptr)                                                        ((uint32_t ) __ldrex(ptr))
+#else
+  #define __LDREXW(ptr)          _Pragma("push") _Pragma("diag_suppress 3731") ((uint32_t ) __ldrex(ptr))  _Pragma("pop")
+#endif
+
+
+/**
+  \brief   STR Exclusive (8 bit)
+  \details Executes a exclusive STR instruction for 8 bit values.
+  \param [in]  value  Value to store
+  \param [in]    ptr  Pointer to location
+  \return          0  Function succeeded
+  \return          1  Function failed
+ */
+#if defined(__ARMCC_VERSION) && (__ARMCC_VERSION < 5060020)
+  #define __STREXB(value, ptr)                                                 __strex(value, ptr)
+#else
+  #define __STREXB(value, ptr)   _Pragma("push") _Pragma("diag_suppress 3731") __strex(value, ptr)        _Pragma("pop")
+#endif
+
+
+/**
+  \brief   STR Exclusive (16 bit)
+  \details Executes a exclusive STR instruction for 16 bit values.
+  \param [in]  value  Value to store
+  \param [in]    ptr  Pointer to location
+  \return          0  Function succeeded
+  \return          1  Function failed
+ */
+#if defined(__ARMCC_VERSION) && (__ARMCC_VERSION < 5060020)
+  #define __STREXH(value, ptr)                                                 __strex(value, ptr)
+#else
+  #define __STREXH(value, ptr)   _Pragma("push") _Pragma("diag_suppress 3731") __strex(value, ptr)        _Pragma("pop")
+#endif
+
+
+/**
+  \brief   STR Exclusive (32 bit)
+  \details Executes a exclusive STR instruction for 32 bit values.
+  \param [in]  value  Value to store
+  \param [in]    ptr  Pointer to location
+  \return          0  Function succeeded
+  \return          1  Function failed
+ */
+#if defined(__ARMCC_VERSION) && (__ARMCC_VERSION < 5060020)
+  #define __STREXW(value, ptr)                                                 __strex(value, ptr)
+#else
+  #define __STREXW(value, ptr)   _Pragma("push") _Pragma("diag_suppress 3731") __strex(value, ptr)        _Pragma("pop")
+#endif
+
+
+/**
+  \brief   Remove the exclusive lock
+  \details Removes the exclusive lock which is created by LDREX.
+ */
+#define __CLREX                           __clrex
+
+
+/**
+  \brief   Signed Saturate
+  \details Saturates a signed value.
+  \param [in]  value  Value to be saturated
+  \param [in]    sat  Bit position to saturate to (1..32)
+  \return             Saturated value
+ */
+#define __SSAT                            __ssat
+
+
+/**
+  \brief   Unsigned Saturate
+  \details Saturates an unsigned value.
+  \param [in]  value  Value to be saturated
+  \param [in]    sat  Bit position to saturate to (0..31)
+  \return             Saturated value
+ */
+#define __USAT                            __usat
+
+
+/**
+  \brief   Rotate Right with Extend (32 bit)
+  \details Moves each bit of a bitstring right by one bit.
+           The carry input is shifted in at the left end of the bitstring.
+  \param [in]    value  Value to rotate
+  \return               Rotated value
+ */
+#ifndef __NO_EMBEDDED_ASM
+__attribute__((section(".rrx_text"))) __STATIC_INLINE __ASM uint32_t __RRX(uint32_t value)
+{
+  rrx r0, r0
+  bx lr
+}
+#endif
+
+
+/**
+  \brief   LDRT Unprivileged (8 bit)
+  \details Executes a Unprivileged LDRT instruction for 8 bit value.
+  \param [in]    ptr  Pointer to data
+  \return             value of type uint8_t at (*ptr)
+ */
+#define __LDRBT(ptr)                      ((uint8_t )  __ldrt(ptr))
+
+
+/**
+  \brief   LDRT Unprivileged (16 bit)
+  \details Executes a Unprivileged LDRT instruction for 16 bit values.
+  \param [in]    ptr  Pointer to data
+  \return        value of type uint16_t at (*ptr)
+ */
+#define __LDRHT(ptr)                      ((uint16_t)  __ldrt(ptr))
+
+
+/**
+  \brief   LDRT Unprivileged (32 bit)
+  \details Executes a Unprivileged LDRT instruction for 32 bit values.
+  \param [in]    ptr  Pointer to data
+  \return        value of type uint32_t at (*ptr)
+ */
+#define __LDRT(ptr)                       ((uint32_t ) __ldrt(ptr))
+
+
+/**
+  \brief   STRT Unprivileged (8 bit)
+  \details Executes a Unprivileged STRT instruction for 8 bit values.
+  \param [in]  value  Value to store
+  \param [in]    ptr  Pointer to location
+ */
+#define __STRBT(value, ptr)               __strt(value, ptr)
+
+
+/**
+  \brief   STRT Unprivileged (16 bit)
+  \details Executes a Unprivileged STRT instruction for 16 bit values.
+  \param [in]  value  Value to store
+  \param [in]    ptr  Pointer to location
+ */
+#define __STRHT(value, ptr)               __strt(value, ptr)
+
+
+/**
+  \brief   STRT Unprivileged (32 bit)
+  \details Executes a Unprivileged STRT instruction for 32 bit values.
+  \param [in]  value  Value to store
+  \param [in]    ptr  Pointer to location
+ */
+#define __STRT(value, ptr)                __strt(value, ptr)
+
+#endif /* (__CORTEX_M >= 0x03U) || (__CORTEX_SC >= 300U) */
+
+/*@}*/ /* end of group CMSIS_Core_InstructionInterface */
+
+
+/* ###################  Compiler specific Intrinsics  ########################### */
+/** \defgroup CMSIS_SIMD_intrinsics CMSIS SIMD Intrinsics
+  Access to dedicated SIMD instructions
+  @{
+*/
+
+#if (__CORTEX_M >= 0x04U)  /* only for Cortex-M4 and above */
+
+#define __SADD8                           __sadd8
+#define __QADD8                           __qadd8
+#define __SHADD8                          __shadd8
+#define __UADD8                           __uadd8
+#define __UQADD8                          __uqadd8
+#define __UHADD8                          __uhadd8
+#define __SSUB8                           __ssub8
+#define __QSUB8                           __qsub8
+#define __SHSUB8                          __shsub8
+#define __USUB8                           __usub8
+#define __UQSUB8                          __uqsub8
+#define __UHSUB8                          __uhsub8
+#define __SADD16                          __sadd16
+#define __QADD16                          __qadd16
+#define __SHADD16                         __shadd16
+#define __UADD16                          __uadd16
+#define __UQADD16                         __uqadd16
+#define __UHADD16                         __uhadd16
+#define __SSUB16                          __ssub16
+#define __QSUB16                          __qsub16
+#define __SHSUB16                         __shsub16
+#define __USUB16                          __usub16
+#define __UQSUB16                         __uqsub16
+#define __UHSUB16                         __uhsub16
+#define __SASX                            __sasx
+#define __QASX                            __qasx
+#define __SHASX                           __shasx
+#define __UASX                            __uasx
+#define __UQASX                           __uqasx
+#define __UHASX                           __uhasx
+#define __SSAX                            __ssax
+#define __QSAX                            __qsax
+#define __SHSAX                           __shsax
+#define __USAX                            __usax
+#define __UQSAX                           __uqsax
+#define __UHSAX                           __uhsax
+#define __USAD8                           __usad8
+#define __USADA8                          __usada8
+#define __SSAT16                          __ssat16
+#define __USAT16                          __usat16
+#define __UXTB16                          __uxtb16
+#define __UXTAB16                         __uxtab16
+#define __SXTB16                          __sxtb16
+#define __SXTAB16                         __sxtab16
+#define __SMUAD                           __smuad
+#define __SMUADX                          __smuadx
+#define __SMLAD                           __smlad
+#define __SMLADX                          __smladx
+#define __SMLALD                          __smlald
+#define __SMLALDX                         __smlaldx
+#define __SMUSD                           __smusd
+#define __SMUSDX                          __smusdx
+#define __SMLSD                           __smlsd
+#define __SMLSDX                          __smlsdx
+#define __SMLSLD                          __smlsld
+#define __SMLSLDX                         __smlsldx
+#define __SEL                             __sel
+#define __QADD                            __qadd
+#define __QSUB                            __qsub
+
+#define __PKHBT(ARG1,ARG2,ARG3)          ( ((((uint32_t)(ARG1))          ) & 0x0000FFFFUL) |  \
+                                           ((((uint32_t)(ARG2)) << (ARG3)) & 0xFFFF0000UL)  )
+
+#define __PKHTB(ARG1,ARG2,ARG3)          ( ((((uint32_t)(ARG1))          ) & 0xFFFF0000UL) |  \
+                                           ((((uint32_t)(ARG2)) >> (ARG3)) & 0x0000FFFFUL)  )
+
+#define __SMMLA(ARG1,ARG2,ARG3)          ( (int32_t)((((int64_t)(ARG1) * (ARG2)) + \
+                                                      ((int64_t)(ARG3) << 32U)     ) >> 32U))
+
+#endif /* (__CORTEX_M >= 0x04) */
+/*@} end of group CMSIS_SIMD_intrinsics */
+
+
+#endif /* __CMSIS_ARMCC_H */

bsp/stm32f10x_HAL/Libraries/CMSIS/Include/core_cm0.h

@@ -0,0 +1,798 @@
+/**************************************************************************//**
+ * @file     core_cm0.h
+ * @brief    CMSIS Cortex-M0 Core Peripheral Access Layer Header File
+ * @version  V4.30
+ * @date     20. October 2015
+ ******************************************************************************/
+/* Copyright (c) 2009 - 2015 ARM LIMITED
+
+   All rights reserved.
+   Redistribution and use in source and binary forms, with or without
+   modification, are permitted provided that the following conditions are met:
+   - Redistributions of source code must retain the above copyright
+     notice, this list of conditions and the following disclaimer.
+   - Redistributions in binary form must reproduce the above copyright
+     notice, this list of conditions and the following disclaimer in the
+     documentation and/or other materials provided with the distribution.
+   - Neither the name of ARM nor the names of its contributors may be used
+     to endorse or promote products derived from this software without
+     specific prior written permission.
+   *
+   THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+   AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+   IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+   ARE DISCLAIMED. IN NO EVENT SHALL COPYRIGHT HOLDERS AND CONTRIBUTORS BE
+   LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+   CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+   SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+   INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+   CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+   ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+   POSSIBILITY OF SUCH DAMAGE.
+   ---------------------------------------------------------------------------*/
+
+
+#if   defined ( __ICCARM__ )
+ #pragma system_include         /* treat file as system include file for MISRA check */
+#elif defined(__ARMCC_VERSION) && (__ARMCC_VERSION >= 6010050)
+  #pragma clang system_header   /* treat file as system include file */
+#endif
+
+#ifndef __CORE_CM0_H_GENERIC
+#define __CORE_CM0_H_GENERIC
+
+#include <stdint.h>
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/**
+  \page CMSIS_MISRA_Exceptions  MISRA-C:2004 Compliance Exceptions
+  CMSIS violates the following MISRA-C:2004 rules:
+
+   \li Required Rule 8.5, object/function definition in header file.<br>
+     Function definitions in header files are used to allow 'inlining'.
+
+   \li Required Rule 18.4, declaration of union type or object of union type: '{...}'.<br>
+     Unions are used for effective representation of core registers.
+
+   \li Advisory Rule 19.7, Function-like macro defined.<br>
+     Function-like macros are used to allow more efficient code.
+ */
+
+
+/*******************************************************************************
+ *                 CMSIS definitions
+ ******************************************************************************/
+/**
+  \ingroup Cortex_M0
+  @{
+ */
+
+/*  CMSIS CM0 definitions */
+#define __CM0_CMSIS_VERSION_MAIN  (0x04U)                                      /*!< [31:16] CMSIS HAL main version */
+#define __CM0_CMSIS_VERSION_SUB   (0x1EU)                                      /*!< [15:0]  CMSIS HAL sub version */
+#define __CM0_CMSIS_VERSION       ((__CM0_CMSIS_VERSION_MAIN << 16U) | \
+                                    __CM0_CMSIS_VERSION_SUB           )        /*!< CMSIS HAL version number */
+
+#define __CORTEX_M                (0x00U)                                      /*!< Cortex-M Core */
+
+
+#if   defined ( __CC_ARM )
+  #define __ASM            __asm                                      /*!< asm keyword for ARM Compiler */
+  #define __INLINE         __inline                                   /*!< inline keyword for ARM Compiler */
+  #define __STATIC_INLINE  static __inline
+
+#elif defined(__ARMCC_VERSION) && (__ARMCC_VERSION >= 6010050)
+  #define __ASM            __asm                                      /*!< asm keyword for ARM Compiler */
+  #define __INLINE         __inline                                   /*!< inline keyword for ARM Compiler */
+  #define __STATIC_INLINE  static __inline
+
+#elif defined ( __GNUC__ )
+  #define __ASM            __asm                                      /*!< asm keyword for GNU Compiler */
+  #define __INLINE         inline                                     /*!< inline keyword for GNU Compiler */
+  #define __STATIC_INLINE  static inline
+
+#elif defined ( __ICCARM__ )
+  #define __ASM            __asm                                      /*!< asm keyword for IAR Compiler */
+  #define __INLINE         inline                                     /*!< inline keyword for IAR Compiler. Only available in High optimization mode! */
+  #define __STATIC_INLINE  static inline
+
+#elif defined ( __TMS470__ )
+  #define __ASM            __asm                                      /*!< asm keyword for TI CCS Compiler */
+  #define __STATIC_INLINE  static inline
+
+#elif defined ( __TASKING__ )
+  #define __ASM            __asm                                      /*!< asm keyword for TASKING Compiler */
+  #define __INLINE         inline                                     /*!< inline keyword for TASKING Compiler */
+  #define __STATIC_INLINE  static inline
+
+#elif defined ( __CSMC__ )
+  #define __packed
+  #define __ASM            _asm                                      /*!< asm keyword for COSMIC Compiler */
+  #define __INLINE         inline                                    /*!< inline keyword for COSMIC Compiler. Use -pc99 on compile line */
+  #define __STATIC_INLINE  static inline
+
+#else
+  #error Unknown compiler
+#endif
+
+/** __FPU_USED indicates whether an FPU is used or not.
+    This core does not support an FPU at all
+*/
+#define __FPU_USED       0U
+
+#if defined ( __CC_ARM )
+  #if defined __TARGET_FPU_VFP
+    #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+  #endif
+
+#elif defined(__ARMCC_VERSION) && (__ARMCC_VERSION >= 6010050)
+  #if defined __ARM_PCS_VFP
+    #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+  #endif
+
+#elif defined ( __GNUC__ )
+  #if defined (__VFP_FP__) && !defined(__SOFTFP__)
+    #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+  #endif
+
+#elif defined ( __ICCARM__ )
+  #if defined __ARMVFP__
+    #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+  #endif
+
+#elif defined ( __TMS470__ )
+  #if defined __TI_VFP_SUPPORT__
+    #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+  #endif
+
+#elif defined ( __TASKING__ )
+  #if defined __FPU_VFP__
+    #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+  #endif
+
+#elif defined ( __CSMC__ )
+  #if ( __CSMC__ & 0x400U)
+    #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+  #endif
+
+#endif
+
+#include "core_cmInstr.h"                /* Core Instruction Access */
+#include "core_cmFunc.h"                 /* Core Function Access */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __CORE_CM0_H_GENERIC */
+
+#ifndef __CMSIS_GENERIC
+
+#ifndef __CORE_CM0_H_DEPENDANT
+#define __CORE_CM0_H_DEPENDANT
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* check device defines and use defaults */
+#if defined __CHECK_DEVICE_DEFINES
+  #ifndef __CM0_REV
+    #define __CM0_REV               0x0000U
+    #warning "__CM0_REV not defined in device header file; using default!"
+  #endif
+
+  #ifndef __NVIC_PRIO_BITS
+    #define __NVIC_PRIO_BITS          2U
+    #warning "__NVIC_PRIO_BITS not defined in device header file; using default!"
+  #endif
+
+  #ifndef __Vendor_SysTickConfig
+    #define __Vendor_SysTickConfig    0U
+    #warning "__Vendor_SysTickConfig not defined in device header file; using default!"
+  #endif
+#endif
+
+/* IO definitions (access restrictions to peripheral registers) */
+/**
+    \defgroup CMSIS_glob_defs CMSIS Global Defines
+
+    <strong>IO Type Qualifiers</strong> are used
+    \li to specify the access to peripheral variables.
+    \li for automatic generation of peripheral register debug information.
+*/
+#ifdef __cplusplus
+  #define   __I     volatile             /*!< Defines 'read only' permissions */
+#else
+  #define   __I     volatile const       /*!< Defines 'read only' permissions */
+#endif
+#define     __O     volatile             /*!< Defines 'write only' permissions */
+#define     __IO    volatile             /*!< Defines 'read / write' permissions */
+
+/* following defines should be used for structure members */
+#define     __IM     volatile const      /*! Defines 'read only' structure member permissions */
+#define     __OM     volatile            /*! Defines 'write only' structure member permissions */
+#define     __IOM    volatile            /*! Defines 'read / write' structure member permissions */
+
+/*@} end of group Cortex_M0 */
+
+
+
+/*******************************************************************************
+ *                 Register Abstraction
+  Core Register contain:
+  - Core Register
+  - Core NVIC Register
+  - Core SCB Register
+  - Core SysTick Register
+ ******************************************************************************/
+/**
+  \defgroup CMSIS_core_register Defines and Type Definitions
+  \brief Type definitions and defines for Cortex-M processor based devices.
+*/
+
+/**
+  \ingroup    CMSIS_core_register
+  \defgroup   CMSIS_CORE  Status and Control Registers
+  \brief      Core Register type definitions.
+  @{
+ */
+
+/**
+  \brief  Union type to access the Application Program Status Register (APSR).
+ */
+typedef union
+{
+  struct
+  {
+    uint32_t _reserved0:28;              /*!< bit:  0..27  Reserved */
+    uint32_t V:1;                        /*!< bit:     28  Overflow condition code flag */
+    uint32_t C:1;                        /*!< bit:     29  Carry condition code flag */
+    uint32_t Z:1;                        /*!< bit:     30  Zero condition code flag */
+    uint32_t N:1;                        /*!< bit:     31  Negative condition code flag */
+  } b;                                   /*!< Structure used for bit  access */
+  uint32_t w;                            /*!< Type      used for word access */
+} APSR_Type;
+
+/* APSR Register Definitions */
+#define APSR_N_Pos                         31U                                            /*!< APSR: N Position */
+#define APSR_N_Msk                         (1UL << APSR_N_Pos)                            /*!< APSR: N Mask */
+
+#define APSR_Z_Pos                         30U                                            /*!< APSR: Z Position */
+#define APSR_Z_Msk                         (1UL << APSR_Z_Pos)                            /*!< APSR: Z Mask */
+
+#define APSR_C_Pos                         29U                                            /*!< APSR: C Position */
+#define APSR_C_Msk                         (1UL << APSR_C_Pos)                            /*!< APSR: C Mask */
+
+#define APSR_V_Pos                         28U                                            /*!< APSR: V Position */
+#define APSR_V_Msk                         (1UL << APSR_V_Pos)                            /*!< APSR: V Mask */
+
+
+/**
+  \brief  Union type to access the Interrupt Program Status Register (IPSR).
+ */
+typedef union
+{
+  struct
+  {
+    uint32_t ISR:9;                      /*!< bit:  0.. 8  Exception number */
+    uint32_t _reserved0:23;              /*!< bit:  9..31  Reserved */
+  } b;                                   /*!< Structure used for bit  access */
+  uint32_t w;                            /*!< Type      used for word access */
+} IPSR_Type;
+
+/* IPSR Register Definitions */
+#define IPSR_ISR_Pos                        0U                                            /*!< IPSR: ISR Position */
+#define IPSR_ISR_Msk                       (0x1FFUL /*<< IPSR_ISR_Pos*/)                  /*!< IPSR: ISR Mask */
+
+
+/**
+  \brief  Union type to access the Special-Purpose Program Status Registers (xPSR).
+ */
+typedef union
+{
+  struct
+  {
+    uint32_t ISR:9;                      /*!< bit:  0.. 8  Exception number */
+    uint32_t _reserved0:15;              /*!< bit:  9..23  Reserved */
+    uint32_t T:1;                        /*!< bit:     24  Thumb bit        (read 0) */
+    uint32_t _reserved1:3;               /*!< bit: 25..27  Reserved */
+    uint32_t V:1;                        /*!< bit:     28  Overflow condition code flag */
+    uint32_t C:1;                        /*!< bit:     29  Carry condition code flag */
+    uint32_t Z:1;                        /*!< bit:     30  Zero condition code flag */
+    uint32_t N:1;                        /*!< bit:     31  Negative condition code flag */
+  } b;                                   /*!< Structure used for bit  access */
+  uint32_t w;                            /*!< Type      used for word access */
+} xPSR_Type;
+
+/* xPSR Register Definitions */
+#define xPSR_N_Pos                         31U                                            /*!< xPSR: N Position */
+#define xPSR_N_Msk                         (1UL << xPSR_N_Pos)                            /*!< xPSR: N Mask */
+
+#define xPSR_Z_Pos                         30U                                            /*!< xPSR: Z Position */
+#define xPSR_Z_Msk                         (1UL << xPSR_Z_Pos)                            /*!< xPSR: Z Mask */
+
+#define xPSR_C_Pos                         29U                                            /*!< xPSR: C Position */
+#define xPSR_C_Msk                         (1UL << xPSR_C_Pos)                            /*!< xPSR: C Mask */
+
+#define xPSR_V_Pos                         28U                                            /*!< xPSR: V Position */
+#define xPSR_V_Msk                         (1UL << xPSR_V_Pos)                            /*!< xPSR: V Mask */
+
+#define xPSR_T_Pos                         24U                                            /*!< xPSR: T Position */
+#define xPSR_T_Msk                         (1UL << xPSR_T_Pos)                            /*!< xPSR: T Mask */
+
+#define xPSR_ISR_Pos                        0U                                            /*!< xPSR: ISR Position */
+#define xPSR_ISR_Msk                       (0x1FFUL /*<< xPSR_ISR_Pos*/)                  /*!< xPSR: ISR Mask */
+
+
+/**
+  \brief  Union type to access the Control Registers (CONTROL).
+ */
+typedef union
+{
+  struct
+  {
+    uint32_t _reserved0:1;               /*!< bit:      0  Reserved */
+    uint32_t SPSEL:1;                    /*!< bit:      1  Stack to be used */
+    uint32_t _reserved1:30;              /*!< bit:  2..31  Reserved */
+  } b;                                   /*!< Structure used for bit  access */
+  uint32_t w;                            /*!< Type      used for word access */
+} CONTROL_Type;
+
+/* CONTROL Register Definitions */
+#define CONTROL_SPSEL_Pos                   1U                                            /*!< CONTROL: SPSEL Position */
+#define CONTROL_SPSEL_Msk                  (1UL << CONTROL_SPSEL_Pos)                     /*!< CONTROL: SPSEL Mask */
+
+/*@} end of group CMSIS_CORE */
+
+
+/**
+  \ingroup    CMSIS_core_register
+  \defgroup   CMSIS_NVIC  Nested Vectored Interrupt Controller (NVIC)
+  \brief      Type definitions for the NVIC Registers
+  @{
+ */
+
+/**
+  \brief  Structure type to access the Nested Vectored Interrupt Controller (NVIC).
+ */
+typedef struct
+{
+  __IOM uint32_t ISER[1U];               /*!< Offset: 0x000 (R/W)  Interrupt Set Enable Register */
+        uint32_t RESERVED0[31U];
+  __IOM uint32_t ICER[1U];               /*!< Offset: 0x080 (R/W)  Interrupt Clear Enable Register */
+        uint32_t RSERVED1[31U];
+  __IOM uint32_t ISPR[1U];               /*!< Offset: 0x100 (R/W)  Interrupt Set Pending Register */
+        uint32_t RESERVED2[31U];
+  __IOM uint32_t ICPR[1U];               /*!< Offset: 0x180 (R/W)  Interrupt Clear Pending Register */
+        uint32_t RESERVED3[31U];
+        uint32_t RESERVED4[64U];
+  __IOM uint32_t IP[8U];                 /*!< Offset: 0x300 (R/W)  Interrupt Priority Register */
+}  NVIC_Type;
+
+/*@} end of group CMSIS_NVIC */
+
+
+/**
+  \ingroup  CMSIS_core_register
+  \defgroup CMSIS_SCB     System Control Block (SCB)
+  \brief    Type definitions for the System Control Block Registers
+  @{
+ */
+
+/**
+  \brief  Structure type to access the System Control Block (SCB).
+ */
+typedef struct
+{
+  __IM  uint32_t CPUID;                  /*!< Offset: 0x000 (R/ )  CPUID Base Register */
+  __IOM uint32_t ICSR;                   /*!< Offset: 0x004 (R/W)  Interrupt Control and State Register */
+        uint32_t RESERVED0;
+  __IOM uint32_t AIRCR;                  /*!< Offset: 0x00C (R/W)  Application Interrupt and Reset Control Register */
+  __IOM uint32_t SCR;                    /*!< Offset: 0x010 (R/W)  System Control Register */
+  __IOM uint32_t CCR;                    /*!< Offset: 0x014 (R/W)  Configuration Control Register */
+        uint32_t RESERVED1;
+  __IOM uint32_t SHP[2U];                /*!< Offset: 0x01C (R/W)  System Handlers Priority Registers. [0] is RESERVED */
+  __IOM uint32_t SHCSR;                  /*!< Offset: 0x024 (R/W)  System Handler Control and State Register */
+} SCB_Type;
+
+/* SCB CPUID Register Definitions */
+#define SCB_CPUID_IMPLEMENTER_Pos          24U                                            /*!< SCB CPUID: IMPLEMENTER Position */
+#define SCB_CPUID_IMPLEMENTER_Msk          (0xFFUL << SCB_CPUID_IMPLEMENTER_Pos)          /*!< SCB CPUID: IMPLEMENTER Mask */
+
+#define SCB_CPUID_VARIANT_Pos              20U                                            /*!< SCB CPUID: VARIANT Position */
+#define SCB_CPUID_VARIANT_Msk              (0xFUL << SCB_CPUID_VARIANT_Pos)               /*!< SCB CPUID: VARIANT Mask */
+
+#define SCB_CPUID_ARCHITECTURE_Pos         16U                                            /*!< SCB CPUID: ARCHITECTURE Position */
+#define SCB_CPUID_ARCHITECTURE_Msk         (0xFUL << SCB_CPUID_ARCHITECTURE_Pos)          /*!< SCB CPUID: ARCHITECTURE Mask */
+
+#define SCB_CPUID_PARTNO_Pos                4U                                            /*!< SCB CPUID: PARTNO Position */
+#define SCB_CPUID_PARTNO_Msk               (0xFFFUL << SCB_CPUID_PARTNO_Pos)              /*!< SCB CPUID: PARTNO Mask */
+
+#define SCB_CPUID_REVISION_Pos              0U                                            /*!< SCB CPUID: REVISION Position */
+#define SCB_CPUID_REVISION_Msk             (0xFUL /*<< SCB_CPUID_REVISION_Pos*/)          /*!< SCB CPUID: REVISION Mask */
+
+/* SCB Interrupt Control State Register Definitions */
+#define SCB_ICSR_NMIPENDSET_Pos            31U                                            /*!< SCB ICSR: NMIPENDSET Position */
+#define SCB_ICSR_NMIPENDSET_Msk            (1UL << SCB_ICSR_NMIPENDSET_Pos)               /*!< SCB ICSR: NMIPENDSET Mask */
+
+#define SCB_ICSR_PENDSVSET_Pos             28U                                            /*!< SCB ICSR: PENDSVSET Position */
+#define SCB_ICSR_PENDSVSET_Msk             (1UL << SCB_ICSR_PENDSVSET_Pos)                /*!< SCB ICSR: PENDSVSET Mask */
+
+#define SCB_ICSR_PENDSVCLR_Pos             27U                                            /*!< SCB ICSR: PENDSVCLR Position */
+#define SCB_ICSR_PENDSVCLR_Msk             (1UL << SCB_ICSR_PENDSVCLR_Pos)                /*!< SCB ICSR: PENDSVCLR Mask */
+
+#define SCB_ICSR_PENDSTSET_Pos             26U                                            /*!< SCB ICSR: PENDSTSET Position */
+#define SCB_ICSR_PENDSTSET_Msk             (1UL << SCB_ICSR_PENDSTSET_Pos)                /*!< SCB ICSR: PENDSTSET Mask */
+
+#define SCB_ICSR_PENDSTCLR_Pos             25U                                            /*!< SCB ICSR: PENDSTCLR Position */
+#define SCB_ICSR_PENDSTCLR_Msk             (1UL << SCB_ICSR_PENDSTCLR_Pos)                /*!< SCB ICSR: PENDSTCLR Mask */
+
+#define SCB_ICSR_ISRPREEMPT_Pos            23U                                            /*!< SCB ICSR: ISRPREEMPT Position */
+#define SCB_ICSR_ISRPREEMPT_Msk            (1UL << SCB_ICSR_ISRPREEMPT_Pos)               /*!< SCB ICSR: ISRPREEMPT Mask */
+
+#define SCB_ICSR_ISRPENDING_Pos            22U                                            /*!< SCB ICSR: ISRPENDING Position */
+#define SCB_ICSR_ISRPENDING_Msk            (1UL << SCB_ICSR_ISRPENDING_Pos)               /*!< SCB ICSR: ISRPENDING Mask */
+
+#define SCB_ICSR_VECTPENDING_Pos           12U                                            /*!< SCB ICSR: VECTPENDING Position */
+#define SCB_ICSR_VECTPENDING_Msk           (0x1FFUL << SCB_ICSR_VECTPENDING_Pos)          /*!< SCB ICSR: VECTPENDING Mask */
+
+#define SCB_ICSR_VECTACTIVE_Pos             0U                                            /*!< SCB ICSR: VECTACTIVE Position */
+#define SCB_ICSR_VECTACTIVE_Msk            (0x1FFUL /*<< SCB_ICSR_VECTACTIVE_Pos*/)       /*!< SCB ICSR: VECTACTIVE Mask */
+
+/* SCB Application Interrupt and Reset Control Register Definitions */
+#define SCB_AIRCR_VECTKEY_Pos              16U                                            /*!< SCB AIRCR: VECTKEY Position */
+#define SCB_AIRCR_VECTKEY_Msk              (0xFFFFUL << SCB_AIRCR_VECTKEY_Pos)            /*!< SCB AIRCR: VECTKEY Mask */
+
+#define SCB_AIRCR_VECTKEYSTAT_Pos          16U                                            /*!< SCB AIRCR: VECTKEYSTAT Position */
+#define SCB_AIRCR_VECTKEYSTAT_Msk          (0xFFFFUL << SCB_AIRCR_VECTKEYSTAT_Pos)        /*!< SCB AIRCR: VECTKEYSTAT Mask */
+
+#define SCB_AIRCR_ENDIANESS_Pos            15U                                            /*!< SCB AIRCR: ENDIANESS Position */
+#define SCB_AIRCR_ENDIANESS_Msk            (1UL << SCB_AIRCR_ENDIANESS_Pos)               /*!< SCB AIRCR: ENDIANESS Mask */
+
+#define SCB_AIRCR_SYSRESETREQ_Pos           2U                                            /*!< SCB AIRCR: SYSRESETREQ Position */
+#define SCB_AIRCR_SYSRESETREQ_Msk          (1UL << SCB_AIRCR_SYSRESETREQ_Pos)             /*!< SCB AIRCR: SYSRESETREQ Mask */
+
+#define SCB_AIRCR_VECTCLRACTIVE_Pos         1U                                            /*!< SCB AIRCR: VECTCLRACTIVE Position */
+#define SCB_AIRCR_VECTCLRACTIVE_Msk        (1UL << SCB_AIRCR_VECTCLRACTIVE_Pos)           /*!< SCB AIRCR: VECTCLRACTIVE Mask */
+
+/* SCB System Control Register Definitions */
+#define SCB_SCR_SEVONPEND_Pos               4U                                            /*!< SCB SCR: SEVONPEND Position */
+#define SCB_SCR_SEVONPEND_Msk              (1UL << SCB_SCR_SEVONPEND_Pos)                 /*!< SCB SCR: SEVONPEND Mask */
+
+#define SCB_SCR_SLEEPDEEP_Pos               2U                                            /*!< SCB SCR: SLEEPDEEP Position */
+#define SCB_SCR_SLEEPDEEP_Msk              (1UL << SCB_SCR_SLEEPDEEP_Pos)                 /*!< SCB SCR: SLEEPDEEP Mask */
+
+#define SCB_SCR_SLEEPONEXIT_Pos             1U                                            /*!< SCB SCR: SLEEPONEXIT Position */
+#define SCB_SCR_SLEEPONEXIT_Msk            (1UL << SCB_SCR_SLEEPONEXIT_Pos)               /*!< SCB SCR: SLEEPONEXIT Mask */
+
+/* SCB Configuration Control Register Definitions */
+#define SCB_CCR_STKALIGN_Pos                9U                                            /*!< SCB CCR: STKALIGN Position */
+#define SCB_CCR_STKALIGN_Msk               (1UL << SCB_CCR_STKALIGN_Pos)                  /*!< SCB CCR: STKALIGN Mask */
+
+#define SCB_CCR_UNALIGN_TRP_Pos             3U                                            /*!< SCB CCR: UNALIGN_TRP Position */
+#define SCB_CCR_UNALIGN_TRP_Msk            (1UL << SCB_CCR_UNALIGN_TRP_Pos)               /*!< SCB CCR: UNALIGN_TRP Mask */
+
+/* SCB System Handler Control and State Register Definitions */
+#define SCB_SHCSR_SVCALLPENDED_Pos         15U                                            /*!< SCB SHCSR: SVCALLPENDED Position */
+#define SCB_SHCSR_SVCALLPENDED_Msk         (1UL << SCB_SHCSR_SVCALLPENDED_Pos)            /*!< SCB SHCSR: SVCALLPENDED Mask */
+
+/*@} end of group CMSIS_SCB */
+
+
+/**
+  \ingroup  CMSIS_core_register
+  \defgroup CMSIS_SysTick     System Tick Timer (SysTick)
+  \brief    Type definitions for the System Timer Registers.
+  @{
+ */
+
+/**
+  \brief  Structure type to access the System Timer (SysTick).
+ */
+typedef struct
+{
+  __IOM uint32_t CTRL;                   /*!< Offset: 0x000 (R/W)  SysTick Control and Status Register */
+  __IOM uint32_t LOAD;                   /*!< Offset: 0x004 (R/W)  SysTick Reload Value Register */
+  __IOM uint32_t VAL;                    /*!< Offset: 0x008 (R/W)  SysTick Current Value Register */
+  __IM  uint32_t CALIB;                  /*!< Offset: 0x00C (R/ )  SysTick Calibration Register */
+} SysTick_Type;
+
+/* SysTick Control / Status Register Definitions */
+#define SysTick_CTRL_COUNTFLAG_Pos         16U                                            /*!< SysTick CTRL: COUNTFLAG Position */
+#define SysTick_CTRL_COUNTFLAG_Msk         (1UL << SysTick_CTRL_COUNTFLAG_Pos)            /*!< SysTick CTRL: COUNTFLAG Mask */
+
+#define SysTick_CTRL_CLKSOURCE_Pos          2U                                            /*!< SysTick CTRL: CLKSOURCE Position */
+#define SysTick_CTRL_CLKSOURCE_Msk         (1UL << SysTick_CTRL_CLKSOURCE_Pos)            /*!< SysTick CTRL: CLKSOURCE Mask */
+
+#define SysTick_CTRL_TICKINT_Pos            1U                                            /*!< SysTick CTRL: TICKINT Position */
+#define SysTick_CTRL_TICKINT_Msk           (1UL << SysTick_CTRL_TICKINT_Pos)              /*!< SysTick CTRL: TICKINT Mask */
+
+#define SysTick_CTRL_ENABLE_Pos             0U                                            /*!< SysTick CTRL: ENABLE Position */
+#define SysTick_CTRL_ENABLE_Msk            (1UL /*<< SysTick_CTRL_ENABLE_Pos*/)           /*!< SysTick CTRL: ENABLE Mask */
+
+/* SysTick Reload Register Definitions */
+#define SysTick_LOAD_RELOAD_Pos             0U                                            /*!< SysTick LOAD: RELOAD Position */
+#define SysTick_LOAD_RELOAD_Msk            (0xFFFFFFUL /*<< SysTick_LOAD_RELOAD_Pos*/)    /*!< SysTick LOAD: RELOAD Mask */
+
+/* SysTick Current Register Definitions */
+#define SysTick_VAL_CURRENT_Pos             0U                                            /*!< SysTick VAL: CURRENT Position */
+#define SysTick_VAL_CURRENT_Msk            (0xFFFFFFUL /*<< SysTick_VAL_CURRENT_Pos*/)    /*!< SysTick VAL: CURRENT Mask */
+
+/* SysTick Calibration Register Definitions */
+#define SysTick_CALIB_NOREF_Pos            31U                                            /*!< SysTick CALIB: NOREF Position */
+#define SysTick_CALIB_NOREF_Msk            (1UL << SysTick_CALIB_NOREF_Pos)               /*!< SysTick CALIB: NOREF Mask */
+
+#define SysTick_CALIB_SKEW_Pos             30U                                            /*!< SysTick CALIB: SKEW Position */
+#define SysTick_CALIB_SKEW_Msk             (1UL << SysTick_CALIB_SKEW_Pos)                /*!< SysTick CALIB: SKEW Mask */
+
+#define SysTick_CALIB_TENMS_Pos             0U                                            /*!< SysTick CALIB: TENMS Position */
+#define SysTick_CALIB_TENMS_Msk            (0xFFFFFFUL /*<< SysTick_CALIB_TENMS_Pos*/)    /*!< SysTick CALIB: TENMS Mask */
+
+/*@} end of group CMSIS_SysTick */
+
+
+/**
+  \ingroup  CMSIS_core_register
+  \defgroup CMSIS_CoreDebug       Core Debug Registers (CoreDebug)
+  \brief    Cortex-M0 Core Debug Registers (DCB registers, SHCSR, and DFSR) are only accessible over DAP and not via processor.
+            Therefore they are not covered by the Cortex-M0 header file.
+  @{
+ */
+/*@} end of group CMSIS_CoreDebug */
+
+
+/**
+  \ingroup    CMSIS_core_register
+  \defgroup   CMSIS_core_bitfield     Core register bit field macros
+  \brief      Macros for use with bit field definitions (xxx_Pos, xxx_Msk).
+  @{
+ */
+
+/**
+  \brief   Mask and shift a bit field value for use in a register bit range.
+  \param[in] field  Name of the register bit field.
+  \param[in] value  Value of the bit field.
+  \return           Masked and shifted value.
+*/
+#define _VAL2FLD(field, value)    ((value << field ## _Pos) & field ## _Msk)
+
+/**
+  \brief     Mask and shift a register value to extract a bit filed value.
+  \param[in] field  Name of the register bit field.
+  \param[in] value  Value of register.
+  \return           Masked and shifted bit field value.
+*/
+#define _FLD2VAL(field, value)    ((value & field ## _Msk) >> field ## _Pos)
+
+/*@} end of group CMSIS_core_bitfield */
+
+
+/**
+  \ingroup    CMSIS_core_register
+  \defgroup   CMSIS_core_base     Core Definitions
+  \brief      Definitions for base addresses, unions, and structures.
+  @{
+ */
+
+/* Memory mapping of Cortex-M0 Hardware */
+#define SCS_BASE            (0xE000E000UL)                            /*!< System Control Space Base Address */
+#define SysTick_BASE        (SCS_BASE +  0x0010UL)                    /*!< SysTick Base Address */
+#define NVIC_BASE           (SCS_BASE +  0x0100UL)                    /*!< NVIC Base Address */
+#define SCB_BASE            (SCS_BASE +  0x0D00UL)                    /*!< System Control Block Base Address */
+
+#define SCB                 ((SCB_Type       *)     SCB_BASE      )   /*!< SCB configuration struct */
+#define SysTick             ((SysTick_Type   *)     SysTick_BASE  )   /*!< SysTick configuration struct */
+#define NVIC                ((NVIC_Type      *)     NVIC_BASE     )   /*!< NVIC configuration struct */
+
+
+/*@} */
+
+
+
+/*******************************************************************************
+ *                Hardware Abstraction Layer
+  Core Function Interface contains:
+  - Core NVIC Functions
+  - Core SysTick Functions
+  - Core Register Access Functions
+ ******************************************************************************/
+/**
+  \defgroup CMSIS_Core_FunctionInterface Functions and Instructions Reference
+*/
+
+
+
+/* ##########################   NVIC functions  #################################### */
+/**
+  \ingroup  CMSIS_Core_FunctionInterface
+  \defgroup CMSIS_Core_NVICFunctions NVIC Functions
+  \brief    Functions that manage interrupts and exceptions via the NVIC.
+  @{
+ */
+
+/* Interrupt Priorities are WORD accessible only under ARMv6M                   */
+/* The following MACROS handle generation of the register offset and byte masks */
+#define _BIT_SHIFT(IRQn)         (  ((((uint32_t)(int32_t)(IRQn))         )      &  0x03UL) * 8UL)
+#define _SHP_IDX(IRQn)           ( (((((uint32_t)(int32_t)(IRQn)) & 0x0FUL)-8UL) >>    2UL)      )
+#define _IP_IDX(IRQn)            (   (((uint32_t)(int32_t)(IRQn))                >>    2UL)      )
+
+
+/**
+  \brief   Enable External Interrupt
+  \details Enables a device-specific interrupt in the NVIC interrupt controller.
+  \param [in]      IRQn  External interrupt number. Value cannot be negative.
+ */
+__STATIC_INLINE void NVIC_EnableIRQ(IRQn_Type IRQn)
+{
+  NVIC->ISER[0U] = (uint32_t)(1UL << (((uint32_t)(int32_t)IRQn) & 0x1FUL));
+}
+
+
+/**
+  \brief   Disable External Interrupt
+  \details Disables a device-specific interrupt in the NVIC interrupt controller.
+  \param [in]      IRQn  External interrupt number. Value cannot be negative.
+ */
+__STATIC_INLINE void NVIC_DisableIRQ(IRQn_Type IRQn)
+{
+  NVIC->ICER[0U] = (uint32_t)(1UL << (((uint32_t)(int32_t)IRQn) & 0x1FUL));
+}
+
+
+/**
+  \brief   Get Pending Interrupt
+  \details Reads the pending register in the NVIC and returns the pending bit for the specified interrupt.
+  \param [in]      IRQn  Interrupt number.
+  \return             0  Interrupt status is not pending.
+  \return             1  Interrupt status is pending.
+ */
+__STATIC_INLINE uint32_t NVIC_GetPendingIRQ(IRQn_Type IRQn)
+{
+  return((uint32_t)(((NVIC->ISPR[0U] & (1UL << (((uint32_t)(int32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL));
+}
+
+
+/**
+  \brief   Set Pending Interrupt
+  \details Sets the pending bit of an external interrupt.
+  \param [in]      IRQn  Interrupt number. Value cannot be negative.
+ */
+__STATIC_INLINE void NVIC_SetPendingIRQ(IRQn_Type IRQn)
+{
+  NVIC->ISPR[0U] = (uint32_t)(1UL << (((uint32_t)(int32_t)IRQn) & 0x1FUL));
+}
+
+
+/**
+  \brief   Clear Pending Interrupt
+  \details Clears the pending bit of an external interrupt.
+  \param [in]      IRQn  External interrupt number. Value cannot be negative.
+ */
+__STATIC_INLINE void NVIC_ClearPendingIRQ(IRQn_Type IRQn)
+{
+  NVIC->ICPR[0U] = (uint32_t)(1UL << (((uint32_t)(int32_t)IRQn) & 0x1FUL));
+}
+
+
+/**
+  \brief   Set Interrupt Priority
+  \details Sets the priority of an interrupt.
+  \note    The priority cannot be set for every core interrupt.
+  \param [in]      IRQn  Interrupt number.
+  \param [in]  priority  Priority to set.
+ */
+__STATIC_INLINE void NVIC_SetPriority(IRQn_Type IRQn, uint32_t priority)
+{
+  if ((int32_t)(IRQn) < 0)
+  {
+    SCB->SHP[_SHP_IDX(IRQn)] = ((uint32_t)(SCB->SHP[_SHP_IDX(IRQn)] & ~(0xFFUL << _BIT_SHIFT(IRQn))) |
+       (((priority << (8U - __NVIC_PRIO_BITS)) & (uint32_t)0xFFUL) << _BIT_SHIFT(IRQn)));
+  }
+  else
+  {
+    NVIC->IP[_IP_IDX(IRQn)]  = ((uint32_t)(NVIC->IP[_IP_IDX(IRQn)]  & ~(0xFFUL << _BIT_SHIFT(IRQn))) |
+       (((priority << (8U - __NVIC_PRIO_BITS)) & (uint32_t)0xFFUL) << _BIT_SHIFT(IRQn)));
+  }
+}
+
+
+/**
+  \brief   Get Interrupt Priority
+  \details Reads the priority of an interrupt.
+           The interrupt number can be positive to specify an external (device specific) interrupt,
+           or negative to specify an internal (core) interrupt.
+  \param [in]   IRQn  Interrupt number.
+  \return             Interrupt Priority.
+                      Value is aligned automatically to the implemented priority bits of the microcontroller.
+ */
+__STATIC_INLINE uint32_t NVIC_GetPriority(IRQn_Type IRQn)
+{
+
+  if ((int32_t)(IRQn) < 0)
+  {
+    return((uint32_t)(((SCB->SHP[_SHP_IDX(IRQn)] >> _BIT_SHIFT(IRQn) ) & (uint32_t)0xFFUL) >> (8U - __NVIC_PRIO_BITS)));
+  }
+  else
+  {
+    return((uint32_t)(((NVIC->IP[ _IP_IDX(IRQn)] >> _BIT_SHIFT(IRQn) ) & (uint32_t)0xFFUL) >> (8U - __NVIC_PRIO_BITS)));
+  }
+}
+
+
+/**
+  \brief   System Reset
+  \details Initiates a system reset request to reset the MCU.
+ */
+__STATIC_INLINE void NVIC_SystemReset(void)
+{
+  __DSB();                                                          /* Ensure all outstanding memory accesses included
+                                                                       buffered write are completed before reset */
+  SCB->AIRCR  = ((0x5FAUL << SCB_AIRCR_VECTKEY_Pos) |
+                 SCB_AIRCR_SYSRESETREQ_Msk);
+  __DSB();                                                          /* Ensure completion of memory access */
+
+  for(;;)                                                           /* wait until reset */
+  {
+    __NOP();
+  }
+}
+
+/*@} end of CMSIS_Core_NVICFunctions */
+
+
+
+/* ##################################    SysTick function  ############################################ */
+/**
+  \ingroup  CMSIS_Core_FunctionInterface
+  \defgroup CMSIS_Core_SysTickFunctions SysTick Functions
+  \brief    Functions that configure the System.
+  @{
+ */
+
+#if (__Vendor_SysTickConfig == 0U)
+
+/**
+  \brief   System Tick Configuration
+  \details Initializes the System Timer and its interrupt, and starts the System Tick Timer.
+           Counter is in free running mode to generate periodic interrupts.
+  \param [in]  ticks  Number of ticks between two interrupts.
+  \return          0  Function succeeded.
+  \return          1  Function failed.
+  \note    When the variable <b>__Vendor_SysTickConfig</b> is set to 1, then the
+           function <b>SysTick_Config</b> is not included. In this case, the file <b><i>device</i>.h</b>
+           must contain a vendor-specific implementation of this function.
+ */
+__STATIC_INLINE uint32_t SysTick_Config(uint32_t ticks)
+{
+  if ((ticks - 1UL) > SysTick_LOAD_RELOAD_Msk)
+  {
+    return (1UL);                                                   /* Reload value impossible */
+  }
+
+  SysTick->LOAD  = (uint32_t)(ticks - 1UL);                         /* set reload register */
+  NVIC_SetPriority (SysTick_IRQn, (1UL << __NVIC_PRIO_BITS) - 1UL); /* set Priority for Systick Interrupt */
+  SysTick->VAL   = 0UL;                                             /* Load the SysTick Counter Value */
+  SysTick->CTRL  = SysTick_CTRL_CLKSOURCE_Msk |
+                   SysTick_CTRL_TICKINT_Msk   |
+                   SysTick_CTRL_ENABLE_Msk;                         /* Enable SysTick IRQ and SysTick Timer */
+  return (0UL);                                                     /* Function successful */
+}
+
+#endif
+
+/*@} end of CMSIS_Core_SysTickFunctions */
+
+
+
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __CORE_CM0_H_DEPENDANT */
+
+#endif /* __CMSIS_GENERIC */

bsp/stm32f10x_HAL/Libraries/CMSIS/Include/core_cm0plus.h

@@ -0,0 +1,914 @@
+/**************************************************************************//**
+ * @file     core_cm0plus.h
+ * @brief    CMSIS Cortex-M0+ Core Peripheral Access Layer Header File
+ * @version  V4.30
+ * @date     20. October 2015
+ ******************************************************************************/
+/* Copyright (c) 2009 - 2015 ARM LIMITED
+
+   All rights reserved.
+   Redistribution and use in source and binary forms, with or without
+   modification, are permitted provided that the following conditions are met:
+   - Redistributions of source code must retain the above copyright
+     notice, this list of conditions and the following disclaimer.
+   - Redistributions in binary form must reproduce the above copyright
+     notice, this list of conditions and the following disclaimer in the
+     documentation and/or other materials provided with the distribution.
+   - Neither the name of ARM nor the names of its contributors may be used
+     to endorse or promote products derived from this software without
+     specific prior written permission.
+   *
+   THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+   AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+   IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+   ARE DISCLAIMED. IN NO EVENT SHALL COPYRIGHT HOLDERS AND CONTRIBUTORS BE
+   LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+   CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+   SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+   INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+   CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+   ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+   POSSIBILITY OF SUCH DAMAGE.
+   ---------------------------------------------------------------------------*/
+
+
+#if   defined ( __ICCARM__ )
+ #pragma system_include         /* treat file as system include file for MISRA check */
+#elif defined(__ARMCC_VERSION) && (__ARMCC_VERSION >= 6010050)
+  #pragma clang system_header   /* treat file as system include file */
+#endif
+
+#ifndef __CORE_CM0PLUS_H_GENERIC
+#define __CORE_CM0PLUS_H_GENERIC
+
+#include <stdint.h>
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/**
+  \page CMSIS_MISRA_Exceptions  MISRA-C:2004 Compliance Exceptions
+  CMSIS violates the following MISRA-C:2004 rules:
+
+   \li Required Rule 8.5, object/function definition in header file.<br>
+     Function definitions in header files are used to allow 'inlining'.
+
+   \li Required Rule 18.4, declaration of union type or object of union type: '{...}'.<br>
+     Unions are used for effective representation of core registers.
+
+   \li Advisory Rule 19.7, Function-like macro defined.<br>
+     Function-like macros are used to allow more efficient code.
+ */
+
+
+/*******************************************************************************
+ *                 CMSIS definitions
+ ******************************************************************************/
+/**
+  \ingroup Cortex-M0+
+  @{
+ */
+
+/*  CMSIS CM0+ definitions */
+#define __CM0PLUS_CMSIS_VERSION_MAIN (0x04U)                                   /*!< [31:16] CMSIS HAL main version */
+#define __CM0PLUS_CMSIS_VERSION_SUB  (0x1EU)                                   /*!< [15:0]  CMSIS HAL sub version */
+#define __CM0PLUS_CMSIS_VERSION      ((__CM0PLUS_CMSIS_VERSION_MAIN << 16U) | \
+                                       __CM0PLUS_CMSIS_VERSION_SUB           ) /*!< CMSIS HAL version number */
+
+#define __CORTEX_M                (0x00U)                                      /*!< Cortex-M Core */
+
+
+#if   defined ( __CC_ARM )
+  #define __ASM            __asm                                      /*!< asm keyword for ARM Compiler */
+  #define __INLINE         __inline                                   /*!< inline keyword for ARM Compiler */
+  #define __STATIC_INLINE  static __inline
+
+#elif defined(__ARMCC_VERSION) && (__ARMCC_VERSION >= 6010050)
+  #define __ASM            __asm                                      /*!< asm keyword for ARM Compiler */
+  #define __INLINE         __inline                                   /*!< inline keyword for ARM Compiler */
+  #define __STATIC_INLINE  static __inline
+
+#elif defined ( __GNUC__ )
+  #define __ASM            __asm                                      /*!< asm keyword for GNU Compiler */
+  #define __INLINE         inline                                     /*!< inline keyword for GNU Compiler */
+  #define __STATIC_INLINE  static inline
+
+#elif defined ( __ICCARM__ )
+  #define __ASM            __asm                                      /*!< asm keyword for IAR Compiler */
+  #define __INLINE         inline                                     /*!< inline keyword for IAR Compiler. Only available in High optimization mode! */
+  #define __STATIC_INLINE  static inline
+
+#elif defined ( __TMS470__ )
+  #define __ASM            __asm                                      /*!< asm keyword for TI CCS Compiler */
+  #define __STATIC_INLINE  static inline
+
+#elif defined ( __TASKING__ )
+  #define __ASM            __asm                                      /*!< asm keyword for TASKING Compiler */
+  #define __INLINE         inline                                     /*!< inline keyword for TASKING Compiler */
+  #define __STATIC_INLINE  static inline
+
+#elif defined ( __CSMC__ )
+  #define __packed
+  #define __ASM            _asm                                      /*!< asm keyword for COSMIC Compiler */
+  #define __INLINE         inline                                    /*!< inline keyword for COSMIC Compiler. Use -pc99 on compile line */
+  #define __STATIC_INLINE  static inline
+
+#else
+  #error Unknown compiler
+#endif
+
+/** __FPU_USED indicates whether an FPU is used or not.
+    This core does not support an FPU at all
+*/
+#define __FPU_USED       0U
+
+#if defined ( __CC_ARM )
+  #if defined __TARGET_FPU_VFP
+    #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+  #endif
+
+#elif defined(__ARMCC_VERSION) && (__ARMCC_VERSION >= 6010050)
+  #if defined __ARM_PCS_VFP
+    #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+  #endif
+
+#elif defined ( __GNUC__ )
+  #if defined (__VFP_FP__) && !defined(__SOFTFP__)
+    #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+  #endif
+
+#elif defined ( __ICCARM__ )
+  #if defined __ARMVFP__
+    #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+  #endif
+
+#elif defined ( __TMS470__ )
+  #if defined __TI_VFP_SUPPORT__
+    #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+  #endif
+
+#elif defined ( __TASKING__ )
+  #if defined __FPU_VFP__
+    #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+  #endif
+
+#elif defined ( __CSMC__ )
+  #if ( __CSMC__ & 0x400U)
+    #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+  #endif
+
+#endif
+
+#include "core_cmInstr.h"                /* Core Instruction Access */
+#include "core_cmFunc.h"                 /* Core Function Access */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __CORE_CM0PLUS_H_GENERIC */
+
+#ifndef __CMSIS_GENERIC
+
+#ifndef __CORE_CM0PLUS_H_DEPENDANT
+#define __CORE_CM0PLUS_H_DEPENDANT
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* check device defines and use defaults */
+#if defined __CHECK_DEVICE_DEFINES
+  #ifndef __CM0PLUS_REV
+    #define __CM0PLUS_REV             0x0000U
+    #warning "__CM0PLUS_REV not defined in device header file; using default!"
+  #endif
+
+  #ifndef __MPU_PRESENT
+    #define __MPU_PRESENT             0U
+    #warning "__MPU_PRESENT not defined in device header file; using default!"
+  #endif
+
+  #ifndef __VTOR_PRESENT
+    #define __VTOR_PRESENT            0U
+    #warning "__VTOR_PRESENT not defined in device header file; using default!"
+  #endif
+
+  #ifndef __NVIC_PRIO_BITS
+    #define __NVIC_PRIO_BITS          2U
+    #warning "__NVIC_PRIO_BITS not defined in device header file; using default!"
+  #endif
+
+  #ifndef __Vendor_SysTickConfig
+    #define __Vendor_SysTickConfig    0U
+    #warning "__Vendor_SysTickConfig not defined in device header file; using default!"
+  #endif
+#endif
+
+/* IO definitions (access restrictions to peripheral registers) */
+/**
+    \defgroup CMSIS_glob_defs CMSIS Global Defines
+
+    <strong>IO Type Qualifiers</strong> are used
+    \li to specify the access to peripheral variables.
+    \li for automatic generation of peripheral register debug information.
+*/
+#ifdef __cplusplus
+  #define   __I     volatile             /*!< Defines 'read only' permissions */
+#else
+  #define   __I     volatile const       /*!< Defines 'read only' permissions */
+#endif
+#define     __O     volatile             /*!< Defines 'write only' permissions */
+#define     __IO    volatile             /*!< Defines 'read / write' permissions */
+
+/* following defines should be used for structure members */
+#define     __IM     volatile const      /*! Defines 'read only' structure member permissions */
+#define     __OM     volatile            /*! Defines 'write only' structure member permissions */
+#define     __IOM    volatile            /*! Defines 'read / write' structure member permissions */
+
+/*@} end of group Cortex-M0+ */
+
+
+
+/*******************************************************************************
+ *                 Register Abstraction
+  Core Register contain:
+  - Core Register
+  - Core NVIC Register
+  - Core SCB Register
+  - Core SysTick Register
+  - Core MPU Register
+ ******************************************************************************/
+/**
+  \defgroup CMSIS_core_register Defines and Type Definitions
+  \brief Type definitions and defines for Cortex-M processor based devices.
+*/
+
+/**
+  \ingroup    CMSIS_core_register
+  \defgroup   CMSIS_CORE  Status and Control Registers
+  \brief      Core Register type definitions.
+  @{
+ */
+
+/**
+  \brief  Union type to access the Application Program Status Register (APSR).
+ */
+typedef union
+{
+  struct
+  {
+    uint32_t _reserved0:28;              /*!< bit:  0..27  Reserved */
+    uint32_t V:1;                        /*!< bit:     28  Overflow condition code flag */
+    uint32_t C:1;                        /*!< bit:     29  Carry condition code flag */
+    uint32_t Z:1;                        /*!< bit:     30  Zero condition code flag */
+    uint32_t N:1;                        /*!< bit:     31  Negative condition code flag */
+  } b;                                   /*!< Structure used for bit  access */
+  uint32_t w;                            /*!< Type      used for word access */
+} APSR_Type;
+
+/* APSR Register Definitions */
+#define APSR_N_Pos                         31U                                            /*!< APSR: N Position */
+#define APSR_N_Msk                         (1UL << APSR_N_Pos)                            /*!< APSR: N Mask */
+
+#define APSR_Z_Pos                         30U                                            /*!< APSR: Z Position */
+#define APSR_Z_Msk                         (1UL << APSR_Z_Pos)                            /*!< APSR: Z Mask */
+
+#define APSR_C_Pos                         29U                                            /*!< APSR: C Position */
+#define APSR_C_Msk                         (1UL << APSR_C_Pos)                            /*!< APSR: C Mask */
+
+#define APSR_V_Pos                         28U                                            /*!< APSR: V Position */
+#define APSR_V_Msk                         (1UL << APSR_V_Pos)                            /*!< APSR: V Mask */
+
+
+/**
+  \brief  Union type to access the Interrupt Program Status Register (IPSR).
+ */
+typedef union
+{
+  struct
+  {
+    uint32_t ISR:9;                      /*!< bit:  0.. 8  Exception number */
+    uint32_t _reserved0:23;              /*!< bit:  9..31  Reserved */
+  } b;                                   /*!< Structure used for bit  access */
+  uint32_t w;                            /*!< Type      used for word access */
+} IPSR_Type;
+
+/* IPSR Register Definitions */
+#define IPSR_ISR_Pos                        0U                                            /*!< IPSR: ISR Position */
+#define IPSR_ISR_Msk                       (0x1FFUL /*<< IPSR_ISR_Pos*/)                  /*!< IPSR: ISR Mask */
+
+
+/**
+  \brief  Union type to access the Special-Purpose Program Status Registers (xPSR).
+ */
+typedef union
+{
+  struct
+  {
+    uint32_t ISR:9;                      /*!< bit:  0.. 8  Exception number */
+    uint32_t _reserved0:15;              /*!< bit:  9..23  Reserved */
+    uint32_t T:1;                        /*!< bit:     24  Thumb bit        (read 0) */
+    uint32_t _reserved1:3;               /*!< bit: 25..27  Reserved */
+    uint32_t V:1;                        /*!< bit:     28  Overflow condition code flag */
+    uint32_t C:1;                        /*!< bit:     29  Carry condition code flag */
+    uint32_t Z:1;                        /*!< bit:     30  Zero condition code flag */
+    uint32_t N:1;                        /*!< bit:     31  Negative condition code flag */
+  } b;                                   /*!< Structure used for bit  access */
+  uint32_t w;                            /*!< Type      used for word access */
+} xPSR_Type;
+
+/* xPSR Register Definitions */
+#define xPSR_N_Pos                         31U                                            /*!< xPSR: N Position */
+#define xPSR_N_Msk                         (1UL << xPSR_N_Pos)                            /*!< xPSR: N Mask */
+
+#define xPSR_Z_Pos                         30U                                            /*!< xPSR: Z Position */
+#define xPSR_Z_Msk                         (1UL << xPSR_Z_Pos)                            /*!< xPSR: Z Mask */
+
+#define xPSR_C_Pos                         29U                                            /*!< xPSR: C Position */
+#define xPSR_C_Msk                         (1UL << xPSR_C_Pos)                            /*!< xPSR: C Mask */
+
+#define xPSR_V_Pos                         28U                                            /*!< xPSR: V Position */
+#define xPSR_V_Msk                         (1UL << xPSR_V_Pos)                            /*!< xPSR: V Mask */
+
+#define xPSR_T_Pos                         24U                                            /*!< xPSR: T Position */
+#define xPSR_T_Msk                         (1UL << xPSR_T_Pos)                            /*!< xPSR: T Mask */
+
+#define xPSR_ISR_Pos                        0U                                            /*!< xPSR: ISR Position */
+#define xPSR_ISR_Msk                       (0x1FFUL /*<< xPSR_ISR_Pos*/)                  /*!< xPSR: ISR Mask */
+
+
+/**
+  \brief  Union type to access the Control Registers (CONTROL).
+ */
+typedef union
+{
+  struct
+  {
+    uint32_t nPRIV:1;                    /*!< bit:      0  Execution privilege in Thread mode */
+    uint32_t SPSEL:1;                    /*!< bit:      1  Stack to be used */
+    uint32_t _reserved1:30;              /*!< bit:  2..31  Reserved */
+  } b;                                   /*!< Structure used for bit  access */
+  uint32_t w;                            /*!< Type      used for word access */
+} CONTROL_Type;
+
+/* CONTROL Register Definitions */
+#define CONTROL_SPSEL_Pos                   1U                                            /*!< CONTROL: SPSEL Position */
+#define CONTROL_SPSEL_Msk                  (1UL << CONTROL_SPSEL_Pos)                     /*!< CONTROL: SPSEL Mask */
+
+#define CONTROL_nPRIV_Pos                   0U                                            /*!< CONTROL: nPRIV Position */
+#define CONTROL_nPRIV_Msk                  (1UL /*<< CONTROL_nPRIV_Pos*/)                 /*!< CONTROL: nPRIV Mask */
+
+/*@} end of group CMSIS_CORE */
+
+
+/**
+  \ingroup    CMSIS_core_register
+  \defgroup   CMSIS_NVIC  Nested Vectored Interrupt Controller (NVIC)
+  \brief      Type definitions for the NVIC Registers
+  @{
+ */
+
+/**
+  \brief  Structure type to access the Nested Vectored Interrupt Controller (NVIC).
+ */
+typedef struct
+{
+  __IOM uint32_t ISER[1U];               /*!< Offset: 0x000 (R/W)  Interrupt Set Enable Register */
+        uint32_t RESERVED0[31U];
+  __IOM uint32_t ICER[1U];               /*!< Offset: 0x080 (R/W)  Interrupt Clear Enable Register */
+        uint32_t RSERVED1[31U];
+  __IOM uint32_t ISPR[1U];               /*!< Offset: 0x100 (R/W)  Interrupt Set Pending Register */
+        uint32_t RESERVED2[31U];
+  __IOM uint32_t ICPR[1U];               /*!< Offset: 0x180 (R/W)  Interrupt Clear Pending Register */
+        uint32_t RESERVED3[31U];
+        uint32_t RESERVED4[64U];
+  __IOM uint32_t IP[8U];                 /*!< Offset: 0x300 (R/W)  Interrupt Priority Register */
+}  NVIC_Type;
+
+/*@} end of group CMSIS_NVIC */
+
+
+/**
+  \ingroup  CMSIS_core_register
+  \defgroup CMSIS_SCB     System Control Block (SCB)
+  \brief    Type definitions for the System Control Block Registers
+  @{
+ */
+
+/**
+  \brief  Structure type to access the System Control Block (SCB).
+ */
+typedef struct
+{
+  __IM  uint32_t CPUID;                  /*!< Offset: 0x000 (R/ )  CPUID Base Register */
+  __IOM uint32_t ICSR;                   /*!< Offset: 0x004 (R/W)  Interrupt Control and State Register */
+#if (__VTOR_PRESENT == 1U)
+  __IOM uint32_t VTOR;                   /*!< Offset: 0x008 (R/W)  Vector Table Offset Register */
+#else
+        uint32_t RESERVED0;
+#endif
+  __IOM uint32_t AIRCR;                  /*!< Offset: 0x00C (R/W)  Application Interrupt and Reset Control Register */
+  __IOM uint32_t SCR;                    /*!< Offset: 0x010 (R/W)  System Control Register */
+  __IOM uint32_t CCR;                    /*!< Offset: 0x014 (R/W)  Configuration Control Register */
+        uint32_t RESERVED1;
+  __IOM uint32_t SHP[2U];                /*!< Offset: 0x01C (R/W)  System Handlers Priority Registers. [0] is RESERVED */
+  __IOM uint32_t SHCSR;                  /*!< Offset: 0x024 (R/W)  System Handler Control and State Register */
+} SCB_Type;
+
+/* SCB CPUID Register Definitions */
+#define SCB_CPUID_IMPLEMENTER_Pos          24U                                            /*!< SCB CPUID: IMPLEMENTER Position */
+#define SCB_CPUID_IMPLEMENTER_Msk          (0xFFUL << SCB_CPUID_IMPLEMENTER_Pos)          /*!< SCB CPUID: IMPLEMENTER Mask */
+
+#define SCB_CPUID_VARIANT_Pos              20U                                            /*!< SCB CPUID: VARIANT Position */
+#define SCB_CPUID_VARIANT_Msk              (0xFUL << SCB_CPUID_VARIANT_Pos)               /*!< SCB CPUID: VARIANT Mask */
+
+#define SCB_CPUID_ARCHITECTURE_Pos         16U                                            /*!< SCB CPUID: ARCHITECTURE Position */
+#define SCB_CPUID_ARCHITECTURE_Msk         (0xFUL << SCB_CPUID_ARCHITECTURE_Pos)          /*!< SCB CPUID: ARCHITECTURE Mask */
+
+#define SCB_CPUID_PARTNO_Pos                4U                                            /*!< SCB CPUID: PARTNO Position */
+#define SCB_CPUID_PARTNO_Msk               (0xFFFUL << SCB_CPUID_PARTNO_Pos)              /*!< SCB CPUID: PARTNO Mask */
+
+#define SCB_CPUID_REVISION_Pos              0U                                            /*!< SCB CPUID: REVISION Position */
+#define SCB_CPUID_REVISION_Msk             (0xFUL /*<< SCB_CPUID_REVISION_Pos*/)          /*!< SCB CPUID: REVISION Mask */
+
+/* SCB Interrupt Control State Register Definitions */
+#define SCB_ICSR_NMIPENDSET_Pos            31U                                            /*!< SCB ICSR: NMIPENDSET Position */
+#define SCB_ICSR_NMIPENDSET_Msk            (1UL << SCB_ICSR_NMIPENDSET_Pos)               /*!< SCB ICSR: NMIPENDSET Mask */
+
+#define SCB_ICSR_PENDSVSET_Pos             28U                                            /*!< SCB ICSR: PENDSVSET Position */
+#define SCB_ICSR_PENDSVSET_Msk             (1UL << SCB_ICSR_PENDSVSET_Pos)                /*!< SCB ICSR: PENDSVSET Mask */
+
+#define SCB_ICSR_PENDSVCLR_Pos             27U                                            /*!< SCB ICSR: PENDSVCLR Position */
+#define SCB_ICSR_PENDSVCLR_Msk             (1UL << SCB_ICSR_PENDSVCLR_Pos)                /*!< SCB ICSR: PENDSVCLR Mask */
+
+#define SCB_ICSR_PENDSTSET_Pos             26U                                            /*!< SCB ICSR: PENDSTSET Position */
+#define SCB_ICSR_PENDSTSET_Msk             (1UL << SCB_ICSR_PENDSTSET_Pos)                /*!< SCB ICSR: PENDSTSET Mask */
+
+#define SCB_ICSR_PENDSTCLR_Pos             25U                                            /*!< SCB ICSR: PENDSTCLR Position */
+#define SCB_ICSR_PENDSTCLR_Msk             (1UL << SCB_ICSR_PENDSTCLR_Pos)                /*!< SCB ICSR: PENDSTCLR Mask */
+
+#define SCB_ICSR_ISRPREEMPT_Pos            23U                                            /*!< SCB ICSR: ISRPREEMPT Position */
+#define SCB_ICSR_ISRPREEMPT_Msk            (1UL << SCB_ICSR_ISRPREEMPT_Pos)               /*!< SCB ICSR: ISRPREEMPT Mask */
+
+#define SCB_ICSR_ISRPENDING_Pos            22U                                            /*!< SCB ICSR: ISRPENDING Position */
+#define SCB_ICSR_ISRPENDING_Msk            (1UL << SCB_ICSR_ISRPENDING_Pos)               /*!< SCB ICSR: ISRPENDING Mask */
+
+#define SCB_ICSR_VECTPENDING_Pos           12U                                            /*!< SCB ICSR: VECTPENDING Position */
+#define SCB_ICSR_VECTPENDING_Msk           (0x1FFUL << SCB_ICSR_VECTPENDING_Pos)          /*!< SCB ICSR: VECTPENDING Mask */
+
+#define SCB_ICSR_VECTACTIVE_Pos             0U                                            /*!< SCB ICSR: VECTACTIVE Position */
+#define SCB_ICSR_VECTACTIVE_Msk            (0x1FFUL /*<< SCB_ICSR_VECTACTIVE_Pos*/)       /*!< SCB ICSR: VECTACTIVE Mask */
+
+#if (__VTOR_PRESENT == 1U)
+/* SCB Interrupt Control State Register Definitions */
+#define SCB_VTOR_TBLOFF_Pos                 8U                                            /*!< SCB VTOR: TBLOFF Position */
+#define SCB_VTOR_TBLOFF_Msk                (0xFFFFFFUL << SCB_VTOR_TBLOFF_Pos)            /*!< SCB VTOR: TBLOFF Mask */
+#endif
+
+/* SCB Application Interrupt and Reset Control Register Definitions */
+#define SCB_AIRCR_VECTKEY_Pos              16U                                            /*!< SCB AIRCR: VECTKEY Position */
+#define SCB_AIRCR_VECTKEY_Msk              (0xFFFFUL << SCB_AIRCR_VECTKEY_Pos)            /*!< SCB AIRCR: VECTKEY Mask */
+
+#define SCB_AIRCR_VECTKEYSTAT_Pos          16U                                            /*!< SCB AIRCR: VECTKEYSTAT Position */
+#define SCB_AIRCR_VECTKEYSTAT_Msk          (0xFFFFUL << SCB_AIRCR_VECTKEYSTAT_Pos)        /*!< SCB AIRCR: VECTKEYSTAT Mask */
+
+#define SCB_AIRCR_ENDIANESS_Pos            15U                                            /*!< SCB AIRCR: ENDIANESS Position */
+#define SCB_AIRCR_ENDIANESS_Msk            (1UL << SCB_AIRCR_ENDIANESS_Pos)               /*!< SCB AIRCR: ENDIANESS Mask */
+
+#define SCB_AIRCR_SYSRESETREQ_Pos           2U                                            /*!< SCB AIRCR: SYSRESETREQ Position */
+#define SCB_AIRCR_SYSRESETREQ_Msk          (1UL << SCB_AIRCR_SYSRESETREQ_Pos)             /*!< SCB AIRCR: SYSRESETREQ Mask */
+
+#define SCB_AIRCR_VECTCLRACTIVE_Pos         1U                                            /*!< SCB AIRCR: VECTCLRACTIVE Position */
+#define SCB_AIRCR_VECTCLRACTIVE_Msk        (1UL << SCB_AIRCR_VECTCLRACTIVE_Pos)           /*!< SCB AIRCR: VECTCLRACTIVE Mask */
+
+/* SCB System Control Register Definitions */
+#define SCB_SCR_SEVONPEND_Pos               4U                                            /*!< SCB SCR: SEVONPEND Position */
+#define SCB_SCR_SEVONPEND_Msk              (1UL << SCB_SCR_SEVONPEND_Pos)                 /*!< SCB SCR: SEVONPEND Mask */
+
+#define SCB_SCR_SLEEPDEEP_Pos               2U                                            /*!< SCB SCR: SLEEPDEEP Position */
+#define SCB_SCR_SLEEPDEEP_Msk              (1UL << SCB_SCR_SLEEPDEEP_Pos)                 /*!< SCB SCR: SLEEPDEEP Mask */
+
+#define SCB_SCR_SLEEPONEXIT_Pos             1U                                            /*!< SCB SCR: SLEEPONEXIT Position */
+#define SCB_SCR_SLEEPONEXIT_Msk            (1UL << SCB_SCR_SLEEPONEXIT_Pos)               /*!< SCB SCR: SLEEPONEXIT Mask */
+
+/* SCB Configuration Control Register Definitions */
+#define SCB_CCR_STKALIGN_Pos                9U                                            /*!< SCB CCR: STKALIGN Position */
+#define SCB_CCR_STKALIGN_Msk               (1UL << SCB_CCR_STKALIGN_Pos)                  /*!< SCB CCR: STKALIGN Mask */
+
+#define SCB_CCR_UNALIGN_TRP_Pos             3U                                            /*!< SCB CCR: UNALIGN_TRP Position */
+#define SCB_CCR_UNALIGN_TRP_Msk            (1UL << SCB_CCR_UNALIGN_TRP_Pos)               /*!< SCB CCR: UNALIGN_TRP Mask */
+
+/* SCB System Handler Control and State Register Definitions */
+#define SCB_SHCSR_SVCALLPENDED_Pos         15U                                            /*!< SCB SHCSR: SVCALLPENDED Position */
+#define SCB_SHCSR_SVCALLPENDED_Msk         (1UL << SCB_SHCSR_SVCALLPENDED_Pos)            /*!< SCB SHCSR: SVCALLPENDED Mask */
+
+/*@} end of group CMSIS_SCB */
+
+
+/**
+  \ingroup  CMSIS_core_register
+  \defgroup CMSIS_SysTick     System Tick Timer (SysTick)
+  \brief    Type definitions for the System Timer Registers.
+  @{
+ */
+
+/**
+  \brief  Structure type to access the System Timer (SysTick).
+ */
+typedef struct
+{
+  __IOM uint32_t CTRL;                   /*!< Offset: 0x000 (R/W)  SysTick Control and Status Register */
+  __IOM uint32_t LOAD;                   /*!< Offset: 0x004 (R/W)  SysTick Reload Value Register */
+  __IOM uint32_t VAL;                    /*!< Offset: 0x008 (R/W)  SysTick Current Value Register */
+  __IM  uint32_t CALIB;                  /*!< Offset: 0x00C (R/ )  SysTick Calibration Register */
+} SysTick_Type;
+
+/* SysTick Control / Status Register Definitions */
+#define SysTick_CTRL_COUNTFLAG_Pos         16U                                            /*!< SysTick CTRL: COUNTFLAG Position */
+#define SysTick_CTRL_COUNTFLAG_Msk         (1UL << SysTick_CTRL_COUNTFLAG_Pos)            /*!< SysTick CTRL: COUNTFLAG Mask */
+
+#define SysTick_CTRL_CLKSOURCE_Pos          2U                                            /*!< SysTick CTRL: CLKSOURCE Position */
+#define SysTick_CTRL_CLKSOURCE_Msk         (1UL << SysTick_CTRL_CLKSOURCE_Pos)            /*!< SysTick CTRL: CLKSOURCE Mask */
+
+#define SysTick_CTRL_TICKINT_Pos            1U                                            /*!< SysTick CTRL: TICKINT Position */
+#define SysTick_CTRL_TICKINT_Msk           (1UL << SysTick_CTRL_TICKINT_Pos)              /*!< SysTick CTRL: TICKINT Mask */
+
+#define SysTick_CTRL_ENABLE_Pos             0U                                            /*!< SysTick CTRL: ENABLE Position */
+#define SysTick_CTRL_ENABLE_Msk            (1UL /*<< SysTick_CTRL_ENABLE_Pos*/)           /*!< SysTick CTRL: ENABLE Mask */
+
+/* SysTick Reload Register Definitions */
+#define SysTick_LOAD_RELOAD_Pos             0U                                            /*!< SysTick LOAD: RELOAD Position */
+#define SysTick_LOAD_RELOAD_Msk            (0xFFFFFFUL /*<< SysTick_LOAD_RELOAD_Pos*/)    /*!< SysTick LOAD: RELOAD Mask */
+
+/* SysTick Current Register Definitions */
+#define SysTick_VAL_CURRENT_Pos             0U                                            /*!< SysTick VAL: CURRENT Position */
+#define SysTick_VAL_CURRENT_Msk            (0xFFFFFFUL /*<< SysTick_VAL_CURRENT_Pos*/)    /*!< SysTick VAL: CURRENT Mask */
+
+/* SysTick Calibration Register Definitions */
+#define SysTick_CALIB_NOREF_Pos            31U                                            /*!< SysTick CALIB: NOREF Position */
+#define SysTick_CALIB_NOREF_Msk            (1UL << SysTick_CALIB_NOREF_Pos)               /*!< SysTick CALIB: NOREF Mask */
+
+#define SysTick_CALIB_SKEW_Pos             30U                                            /*!< SysTick CALIB: SKEW Position */
+#define SysTick_CALIB_SKEW_Msk             (1UL << SysTick_CALIB_SKEW_Pos)                /*!< SysTick CALIB: SKEW Mask */
+
+#define SysTick_CALIB_TENMS_Pos             0U                                            /*!< SysTick CALIB: TENMS Position */
+#define SysTick_CALIB_TENMS_Msk            (0xFFFFFFUL /*<< SysTick_CALIB_TENMS_Pos*/)    /*!< SysTick CALIB: TENMS Mask */
+
+/*@} end of group CMSIS_SysTick */
+
+#if (__MPU_PRESENT == 1U)
+/**
+  \ingroup  CMSIS_core_register
+  \defgroup CMSIS_MPU     Memory Protection Unit (MPU)
+  \brief    Type definitions for the Memory Protection Unit (MPU)
+  @{
+ */
+
+/**
+  \brief  Structure type to access the Memory Protection Unit (MPU).
+ */
+typedef struct
+{
+  __IM  uint32_t TYPE;                   /*!< Offset: 0x000 (R/ )  MPU Type Register */
+  __IOM uint32_t CTRL;                   /*!< Offset: 0x004 (R/W)  MPU Control Register */
+  __IOM uint32_t RNR;                    /*!< Offset: 0x008 (R/W)  MPU Region RNRber Register */
+  __IOM uint32_t RBAR;                   /*!< Offset: 0x00C (R/W)  MPU Region Base Address Register */
+  __IOM uint32_t RASR;                   /*!< Offset: 0x010 (R/W)  MPU Region Attribute and Size Register */
+} MPU_Type;
+
+/* MPU Type Register Definitions */
+#define MPU_TYPE_IREGION_Pos               16U                                            /*!< MPU TYPE: IREGION Position */
+#define MPU_TYPE_IREGION_Msk               (0xFFUL << MPU_TYPE_IREGION_Pos)               /*!< MPU TYPE: IREGION Mask */
+
+#define MPU_TYPE_DREGION_Pos                8U                                            /*!< MPU TYPE: DREGION Position */
+#define MPU_TYPE_DREGION_Msk               (0xFFUL << MPU_TYPE_DREGION_Pos)               /*!< MPU TYPE: DREGION Mask */
+
+#define MPU_TYPE_SEPARATE_Pos               0U                                            /*!< MPU TYPE: SEPARATE Position */
+#define MPU_TYPE_SEPARATE_Msk              (1UL /*<< MPU_TYPE_SEPARATE_Pos*/)             /*!< MPU TYPE: SEPARATE Mask */
+
+/* MPU Control Register Definitions */
+#define MPU_CTRL_PRIVDEFENA_Pos             2U                                            /*!< MPU CTRL: PRIVDEFENA Position */
+#define MPU_CTRL_PRIVDEFENA_Msk            (1UL << MPU_CTRL_PRIVDEFENA_Pos)               /*!< MPU CTRL: PRIVDEFENA Mask */
+
+#define MPU_CTRL_HFNMIENA_Pos               1U                                            /*!< MPU CTRL: HFNMIENA Position */
+#define MPU_CTRL_HFNMIENA_Msk              (1UL << MPU_CTRL_HFNMIENA_Pos)                 /*!< MPU CTRL: HFNMIENA Mask */
+
+#define MPU_CTRL_ENABLE_Pos                 0U                                            /*!< MPU CTRL: ENABLE Position */
+#define MPU_CTRL_ENABLE_Msk                (1UL /*<< MPU_CTRL_ENABLE_Pos*/)               /*!< MPU CTRL: ENABLE Mask */
+
+/* MPU Region Number Register Definitions */
+#define MPU_RNR_REGION_Pos                  0U                                            /*!< MPU RNR: REGION Position */
+#define MPU_RNR_REGION_Msk                 (0xFFUL /*<< MPU_RNR_REGION_Pos*/)             /*!< MPU RNR: REGION Mask */
+
+/* MPU Region Base Address Register Definitions */
+#define MPU_RBAR_ADDR_Pos                   8U                                            /*!< MPU RBAR: ADDR Position */
+#define MPU_RBAR_ADDR_Msk                  (0xFFFFFFUL << MPU_RBAR_ADDR_Pos)              /*!< MPU RBAR: ADDR Mask */
+
+#define MPU_RBAR_VALID_Pos                  4U                                            /*!< MPU RBAR: VALID Position */
+#define MPU_RBAR_VALID_Msk                 (1UL << MPU_RBAR_VALID_Pos)                    /*!< MPU RBAR: VALID Mask */
+
+#define MPU_RBAR_REGION_Pos                 0U                                            /*!< MPU RBAR: REGION Position */
+#define MPU_RBAR_REGION_Msk                (0xFUL /*<< MPU_RBAR_REGION_Pos*/)             /*!< MPU RBAR: REGION Mask */
+
+/* MPU Region Attribute and Size Register Definitions */
+#define MPU_RASR_ATTRS_Pos                 16U                                            /*!< MPU RASR: MPU Region Attribute field Position */
+#define MPU_RASR_ATTRS_Msk                 (0xFFFFUL << MPU_RASR_ATTRS_Pos)               /*!< MPU RASR: MPU Region Attribute field Mask */
+
+#define MPU_RASR_XN_Pos                    28U                                            /*!< MPU RASR: ATTRS.XN Position */
+#define MPU_RASR_XN_Msk                    (1UL << MPU_RASR_XN_Pos)                       /*!< MPU RASR: ATTRS.XN Mask */
+
+#define MPU_RASR_AP_Pos                    24U                                            /*!< MPU RASR: ATTRS.AP Position */
+#define MPU_RASR_AP_Msk                    (0x7UL << MPU_RASR_AP_Pos)                     /*!< MPU RASR: ATTRS.AP Mask */
+
+#define MPU_RASR_TEX_Pos                   19U                                            /*!< MPU RASR: ATTRS.TEX Position */
+#define MPU_RASR_TEX_Msk                   (0x7UL << MPU_RASR_TEX_Pos)                    /*!< MPU RASR: ATTRS.TEX Mask */
+
+#define MPU_RASR_S_Pos                     18U                                            /*!< MPU RASR: ATTRS.S Position */
+#define MPU_RASR_S_Msk                     (1UL << MPU_RASR_S_Pos)                        /*!< MPU RASR: ATTRS.S Mask */
+
+#define MPU_RASR_C_Pos                     17U                                            /*!< MPU RASR: ATTRS.C Position */
+#define MPU_RASR_C_Msk                     (1UL << MPU_RASR_C_Pos)                        /*!< MPU RASR: ATTRS.C Mask */
+
+#define MPU_RASR_B_Pos                     16U                                            /*!< MPU RASR: ATTRS.B Position */
+#define MPU_RASR_B_Msk                     (1UL << MPU_RASR_B_Pos)                        /*!< MPU RASR: ATTRS.B Mask */
+
+#define MPU_RASR_SRD_Pos                    8U                                            /*!< MPU RASR: Sub-Region Disable Position */
+#define MPU_RASR_SRD_Msk                   (0xFFUL << MPU_RASR_SRD_Pos)                   /*!< MPU RASR: Sub-Region Disable Mask */
+
+#define MPU_RASR_SIZE_Pos                   1U                                            /*!< MPU RASR: Region Size Field Position */
+#define MPU_RASR_SIZE_Msk                  (0x1FUL << MPU_RASR_SIZE_Pos)                  /*!< MPU RASR: Region Size Field Mask */
+
+#define MPU_RASR_ENABLE_Pos                 0U                                            /*!< MPU RASR: Region enable bit Position */
+#define MPU_RASR_ENABLE_Msk                (1UL /*<< MPU_RASR_ENABLE_Pos*/)               /*!< MPU RASR: Region enable bit Disable Mask */
+
+/*@} end of group CMSIS_MPU */
+#endif
+
+
+/**
+  \ingroup  CMSIS_core_register
+  \defgroup CMSIS_CoreDebug       Core Debug Registers (CoreDebug)
+  \brief    Cortex-M0+ Core Debug Registers (DCB registers, SHCSR, and DFSR) are only accessible over DAP and not via processor.
+            Therefore they are not covered by the Cortex-M0+ header file.
+  @{
+ */
+/*@} end of group CMSIS_CoreDebug */
+
+
+/**
+  \ingroup    CMSIS_core_register
+  \defgroup   CMSIS_core_bitfield     Core register bit field macros
+  \brief      Macros for use with bit field definitions (xxx_Pos, xxx_Msk).
+  @{
+ */
+
+/**
+  \brief   Mask and shift a bit field value for use in a register bit range.
+  \param[in] field  Name of the register bit field.
+  \param[in] value  Value of the bit field.
+  \return           Masked and shifted value.
+*/
+#define _VAL2FLD(field, value)    ((value << field ## _Pos) & field ## _Msk)
+
+/**
+  \brief     Mask and shift a register value to extract a bit filed value.
+  \param[in] field  Name of the register bit field.
+  \param[in] value  Value of register.
+  \return           Masked and shifted bit field value.
+*/
+#define _FLD2VAL(field, value)    ((value & field ## _Msk) >> field ## _Pos)
+
+/*@} end of group CMSIS_core_bitfield */
+
+
+/**
+  \ingroup    CMSIS_core_register
+  \defgroup   CMSIS_core_base     Core Definitions
+  \brief      Definitions for base addresses, unions, and structures.
+  @{
+ */
+
+/* Memory mapping of Cortex-M0+ Hardware */
+#define SCS_BASE            (0xE000E000UL)                            /*!< System Control Space Base Address */
+#define SysTick_BASE        (SCS_BASE +  0x0010UL)                    /*!< SysTick Base Address */
+#define NVIC_BASE           (SCS_BASE +  0x0100UL)                    /*!< NVIC Base Address */
+#define SCB_BASE            (SCS_BASE +  0x0D00UL)                    /*!< System Control Block Base Address */
+
+#define SCB                 ((SCB_Type       *)     SCB_BASE      )   /*!< SCB configuration struct */
+#define SysTick             ((SysTick_Type   *)     SysTick_BASE  )   /*!< SysTick configuration struct */
+#define NVIC                ((NVIC_Type      *)     NVIC_BASE     )   /*!< NVIC configuration struct */
+
+#if (__MPU_PRESENT == 1U)
+  #define MPU_BASE          (SCS_BASE +  0x0D90UL)                    /*!< Memory Protection Unit */
+  #define MPU               ((MPU_Type       *)     MPU_BASE      )   /*!< Memory Protection Unit */
+#endif
+
+/*@} */
+
+
+
+/*******************************************************************************
+ *                Hardware Abstraction Layer
+  Core Function Interface contains:
+  - Core NVIC Functions
+  - Core SysTick Functions
+  - Core Register Access Functions
+ ******************************************************************************/
+/**
+  \defgroup CMSIS_Core_FunctionInterface Functions and Instructions Reference
+*/
+
+
+
+/* ##########################   NVIC functions  #################################### */
+/**
+  \ingroup  CMSIS_Core_FunctionInterface
+  \defgroup CMSIS_Core_NVICFunctions NVIC Functions
+  \brief    Functions that manage interrupts and exceptions via the NVIC.
+  @{
+ */
+
+/* Interrupt Priorities are WORD accessible only under ARMv6M                   */
+/* The following MACROS handle generation of the register offset and byte masks */
+#define _BIT_SHIFT(IRQn)         (  ((((uint32_t)(int32_t)(IRQn))         )      &  0x03UL) * 8UL)
+#define _SHP_IDX(IRQn)           ( (((((uint32_t)(int32_t)(IRQn)) & 0x0FUL)-8UL) >>    2UL)      )
+#define _IP_IDX(IRQn)            (   (((uint32_t)(int32_t)(IRQn))                >>    2UL)      )
+
+
+/**
+  \brief   Enable External Interrupt
+  \details Enables a device-specific interrupt in the NVIC interrupt controller.
+  \param [in]      IRQn  External interrupt number. Value cannot be negative.
+ */
+__STATIC_INLINE void NVIC_EnableIRQ(IRQn_Type IRQn)
+{
+  NVIC->ISER[0U] = (uint32_t)(1UL << (((uint32_t)(int32_t)IRQn) & 0x1FUL));
+}
+
+
+/**
+  \brief   Disable External Interrupt
+  \details Disables a device-specific interrupt in the NVIC interrupt controller.
+  \param [in]      IRQn  External interrupt number. Value cannot be negative.
+ */
+__STATIC_INLINE void NVIC_DisableIRQ(IRQn_Type IRQn)
+{
+  NVIC->ICER[0U] = (uint32_t)(1UL << (((uint32_t)(int32_t)IRQn) & 0x1FUL));
+}
+
+
+/**
+  \brief   Get Pending Interrupt
+  \details Reads the pending register in the NVIC and returns the pending bit for the specified interrupt.
+  \param [in]      IRQn  Interrupt number.
+  \return             0  Interrupt status is not pending.
+  \return             1  Interrupt status is pending.
+ */
+__STATIC_INLINE uint32_t NVIC_GetPendingIRQ(IRQn_Type IRQn)
+{
+  return((uint32_t)(((NVIC->ISPR[0U] & (1UL << (((uint32_t)(int32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL));
+}
+
+
+/**
+  \brief   Set Pending Interrupt
+  \details Sets the pending bit of an external interrupt.
+  \param [in]      IRQn  Interrupt number. Value cannot be negative.
+ */
+__STATIC_INLINE void NVIC_SetPendingIRQ(IRQn_Type IRQn)
+{
+  NVIC->ISPR[0U] = (uint32_t)(1UL << (((uint32_t)(int32_t)IRQn) & 0x1FUL));
+}
+
+
+/**
+  \brief   Clear Pending Interrupt
+  \details Clears the pending bit of an external interrupt.
+  \param [in]      IRQn  External interrupt number. Value cannot be negative.
+ */
+__STATIC_INLINE void NVIC_ClearPendingIRQ(IRQn_Type IRQn)
+{
+  NVIC->ICPR[0U] = (uint32_t)(1UL << (((uint32_t)(int32_t)IRQn) & 0x1FUL));
+}
+
+
+/**
+  \brief   Set Interrupt Priority
+  \details Sets the priority of an interrupt.
+  \note    The priority cannot be set for every core interrupt.
+  \param [in]      IRQn  Interrupt number.
+  \param [in]  priority  Priority to set.
+ */
+__STATIC_INLINE void NVIC_SetPriority(IRQn_Type IRQn, uint32_t priority)
+{
+  if ((int32_t)(IRQn) < 0)
+  {
+    SCB->SHP[_SHP_IDX(IRQn)] = ((uint32_t)(SCB->SHP[_SHP_IDX(IRQn)] & ~(0xFFUL << _BIT_SHIFT(IRQn))) |
+       (((priority << (8U - __NVIC_PRIO_BITS)) & (uint32_t)0xFFUL) << _BIT_SHIFT(IRQn)));
+  }
+  else
+  {
+    NVIC->IP[_IP_IDX(IRQn)]  = ((uint32_t)(NVIC->IP[_IP_IDX(IRQn)]  & ~(0xFFUL << _BIT_SHIFT(IRQn))) |
+       (((priority << (8U - __NVIC_PRIO_BITS)) & (uint32_t)0xFFUL) << _BIT_SHIFT(IRQn)));
+  }
+}
+
+
+/**
+  \brief   Get Interrupt Priority
+  \details Reads the priority of an interrupt.
+           The interrupt number can be positive to specify an external (device specific) interrupt,
+           or negative to specify an internal (core) interrupt.
+  \param [in]   IRQn  Interrupt number.
+  \return             Interrupt Priority.
+                      Value is aligned automatically to the implemented priority bits of the microcontroller.
+ */
+__STATIC_INLINE uint32_t NVIC_GetPriority(IRQn_Type IRQn)
+{
+
+  if ((int32_t)(IRQn) < 0)
+  {
+    return((uint32_t)(((SCB->SHP[_SHP_IDX(IRQn)] >> _BIT_SHIFT(IRQn) ) & (uint32_t)0xFFUL) >> (8U - __NVIC_PRIO_BITS)));
+  }
+  else
+  {
+    return((uint32_t)(((NVIC->IP[ _IP_IDX(IRQn)] >> _BIT_SHIFT(IRQn) ) & (uint32_t)0xFFUL) >> (8U - __NVIC_PRIO_BITS)));
+  }
+}
+
+
+/**
+  \brief   System Reset
+  \details Initiates a system reset request to reset the MCU.
+ */
+__STATIC_INLINE void NVIC_SystemReset(void)
+{
+  __DSB();                                                          /* Ensure all outstanding memory accesses included
+                                                                       buffered write are completed before reset */
+  SCB->AIRCR  = ((0x5FAUL << SCB_AIRCR_VECTKEY_Pos) |
+                 SCB_AIRCR_SYSRESETREQ_Msk);
+  __DSB();                                                          /* Ensure completion of memory access */
+
+  for(;;)                                                           /* wait until reset */
+  {
+    __NOP();
+  }
+}
+
+/*@} end of CMSIS_Core_NVICFunctions */
+
+
+
+/* ##################################    SysTick function  ############################################ */
+/**
+  \ingroup  CMSIS_Core_FunctionInterface
+  \defgroup CMSIS_Core_SysTickFunctions SysTick Functions
+  \brief    Functions that configure the System.
+  @{
+ */
+
+#if (__Vendor_SysTickConfig == 0U)
+
+/**
+  \brief   System Tick Configuration
+  \details Initializes the System Timer and its interrupt, and starts the System Tick Timer.
+           Counter is in free running mode to generate periodic interrupts.
+  \param [in]  ticks  Number of ticks between two interrupts.
+  \return          0  Function succeeded.
+  \return          1  Function failed.
+  \note    When the variable <b>__Vendor_SysTickConfig</b> is set to 1, then the
+           function <b>SysTick_Config</b> is not included. In this case, the file <b><i>device</i>.h</b>
+           must contain a vendor-specific implementation of this function.
+ */
+__STATIC_INLINE uint32_t SysTick_Config(uint32_t ticks)
+{
+  if ((ticks - 1UL) > SysTick_LOAD_RELOAD_Msk)
+  {
+    return (1UL);                                                   /* Reload value impossible */
+  }
+
+  SysTick->LOAD  = (uint32_t)(ticks - 1UL);                         /* set reload register */
+  NVIC_SetPriority (SysTick_IRQn, (1UL << __NVIC_PRIO_BITS) - 1UL); /* set Priority for Systick Interrupt */
+  SysTick->VAL   = 0UL;                                             /* Load the SysTick Counter Value */
+  SysTick->CTRL  = SysTick_CTRL_CLKSOURCE_Msk |
+                   SysTick_CTRL_TICKINT_Msk   |
+                   SysTick_CTRL_ENABLE_Msk;                         /* Enable SysTick IRQ and SysTick Timer */
+  return (0UL);                                                     /* Function successful */
+}
+
+#endif
+
+/*@} end of CMSIS_Core_SysTickFunctions */
+
+
+
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __CORE_CM0PLUS_H_DEPENDANT */
+
+#endif /* __CMSIS_GENERIC */

bsp/stm32f10x_HAL/Libraries/CMSIS/Include/core_cmFunc.h

@@ -0,0 +1,87 @@
+/**************************************************************************//**
+ * @file     core_cmFunc.h
+ * @brief    CMSIS Cortex-M Core Function Access Header File
+ * @version  V4.30
+ * @date     20. October 2015
+ ******************************************************************************/
+/* Copyright (c) 2009 - 2015 ARM LIMITED
+
+   All rights reserved.
+   Redistribution and use in source and binary forms, with or without
+   modification, are permitted provided that the following conditions are met:
+   - Redistributions of source code must retain the above copyright
+     notice, this list of conditions and the following disclaimer.
+   - Redistributions in binary form must reproduce the above copyright
+     notice, this list of conditions and the following disclaimer in the
+     documentation and/or other materials provided with the distribution.
+   - Neither the name of ARM nor the names of its contributors may be used
+     to endorse or promote products derived from this software without
+     specific prior written permission.
+   *
+   THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+   AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+   IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+   ARE DISCLAIMED. IN NO EVENT SHALL COPYRIGHT HOLDERS AND CONTRIBUTORS BE
+   LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+   CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+   SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+   INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+   CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+   ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+   POSSIBILITY OF SUCH DAMAGE.
+   ---------------------------------------------------------------------------*/
+
+
+#if   defined ( __ICCARM__ )
+ #pragma system_include         /* treat file as system include file for MISRA check */
+#elif defined(__ARMCC_VERSION) && (__ARMCC_VERSION >= 6010050)
+  #pragma clang system_header   /* treat file as system include file */
+#endif
+
+#ifndef __CORE_CMFUNC_H
+#define __CORE_CMFUNC_H
+
+
+/* ###########################  Core Function Access  ########################### */
+/** \ingroup  CMSIS_Core_FunctionInterface
+    \defgroup CMSIS_Core_RegAccFunctions CMSIS Core Register Access Functions
+  @{
+*/
+
+/*------------------ RealView Compiler -----------------*/
+#if   defined ( __CC_ARM )
+  #include "cmsis_armcc.h"
+
+/*------------------ ARM Compiler V6 -------------------*/
+#elif defined(__ARMCC_VERSION) && (__ARMCC_VERSION >= 6010050)
+  #include "cmsis_armcc_V6.h"
+
+/*------------------ GNU Compiler ----------------------*/
+#elif defined ( __GNUC__ )
+  #include "cmsis_gcc.h"
+
+/*------------------ ICC Compiler ----------------------*/
+#elif defined ( __ICCARM__ )
+  #include <cmsis_iar.h>
+
+/*------------------ TI CCS Compiler -------------------*/
+#elif defined ( __TMS470__ )
+  #include <cmsis_ccs.h>
+
+/*------------------ TASKING Compiler ------------------*/
+#elif defined ( __TASKING__ )
+  /*
+   * The CMSIS functions have been implemented as intrinsics in the compiler.
+   * Please use "carm -?i" to get an up to date list of all intrinsics,
+   * Including the CMSIS ones.
+   */
+
+/*------------------ COSMIC Compiler -------------------*/
+#elif defined ( __CSMC__ )
+  #include <cmsis_csm.h>
+
+#endif
+
+/*@} end of CMSIS_Core_RegAccFunctions */
+
+#endif /* __CORE_CMFUNC_H */

bsp/stm32f10x_HAL/Libraries/CMSIS/Include/core_cmInstr.h

@@ -0,0 +1,87 @@
+/**************************************************************************//**
+ * @file     core_cmInstr.h
+ * @brief    CMSIS Cortex-M Core Instruction Access Header File
+ * @version  V4.30
+ * @date     20. October 2015
+ ******************************************************************************/
+/* Copyright (c) 2009 - 2015 ARM LIMITED
+
+   All rights reserved.
+   Redistribution and use in source and binary forms, with or without
+   modification, are permitted provided that the following conditions are met:
+   - Redistributions of source code must retain the above copyright
+     notice, this list of conditions and the following disclaimer.
+   - Redistributions in binary form must reproduce the above copyright
+     notice, this list of conditions and the following disclaimer in the
+     documentation and/or other materials provided with the distribution.
+   - Neither the name of ARM nor the names of its contributors may be used
+     to endorse or promote products derived from this software without
+     specific prior written permission.
+   *
+   THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+   AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+   IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+   ARE DISCLAIMED. IN NO EVENT SHALL COPYRIGHT HOLDERS AND CONTRIBUTORS BE
+   LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+   CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+   SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+   INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+   CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+   ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+   POSSIBILITY OF SUCH DAMAGE.
+   ---------------------------------------------------------------------------*/
+
+
+#if   defined ( __ICCARM__ )
+ #pragma system_include         /* treat file as system include file for MISRA check */
+#elif defined(__ARMCC_VERSION) && (__ARMCC_VERSION >= 6010050)
+  #pragma clang system_header   /* treat file as system include file */
+#endif
+
+#ifndef __CORE_CMINSTR_H
+#define __CORE_CMINSTR_H
+
+
+/* ##########################  Core Instruction Access  ######################### */
+/** \defgroup CMSIS_Core_InstructionInterface CMSIS Core Instruction Interface
+  Access to dedicated instructions
+  @{
+*/
+
+/*------------------ RealView Compiler -----------------*/
+#if   defined ( __CC_ARM )
+  #include "cmsis_armcc.h"
+
+/*------------------ ARM Compiler V6 -------------------*/
+#elif defined(__ARMCC_VERSION) && (__ARMCC_VERSION >= 6010050)
+  #include "cmsis_armcc_V6.h"
+
+/*------------------ GNU Compiler ----------------------*/
+#elif defined ( __GNUC__ )
+  #include "cmsis_gcc.h"
+
+/*------------------ ICC Compiler ----------------------*/
+#elif defined ( __ICCARM__ )
+  #include <cmsis_iar.h>
+
+/*------------------ TI CCS Compiler -------------------*/
+#elif defined ( __TMS470__ )
+  #include <cmsis_ccs.h>
+
+/*------------------ TASKING Compiler ------------------*/
+#elif defined ( __TASKING__ )
+  /*
+   * The CMSIS functions have been implemented as intrinsics in the compiler.
+   * Please use "carm -?i" to get an up to date list of all intrinsics,
+   * Including the CMSIS ones.
+   */
+
+/*------------------ COSMIC Compiler -------------------*/
+#elif defined ( __CSMC__ )
+  #include <cmsis_csm.h>
+
+#endif
+
+/*@}*/ /* end of group CMSIS_Core_InstructionInterface */
+
+#endif /* __CORE_CMINSTR_H */