Since those features are general properties of the environment, it makes
sense to use them from libc++abi too, and so the name libcpp-has-no-xxx
doesn't make sense.
Differential Revision: https://reviews.llvm.org/D126482
As part of https://reviews.llvm.org/D119036
(506cf6dc04), `-DNOMINMAX` was
dropped from the Windows CI configurations, replaced with a
block with `_LIBCPP_PUSH_MACROS`, `#include <__undef_macros>`
and `_LIBCPP_POP_MACROS` (and
`ADDITIONAL_COMPILE_FLAGS: -DNOMINMAX` left in two tests).
However, this workaround breaks the running the libc++ tests
against a different C++ standard library than libc++, as those
macros and that header are libc++ internals.
Therefore, reinstate `-DNOMINMAX` for clang-cl configurations
and remove the libc++ specific bits in filesystem_test_helper.h.
Differential Revision: https://reviews.llvm.org/D120478
A number of the filesystem tests create a directory that contains a bad
symlink. On AIX recursively setting permissions on said directory will
return a non-zero value because of the bad symlink, however the
following rm -r still completes successfully. Avoid the assertion on
AIX, and rely on the return value of the remove command to detect
problems.
Differential Revision: https://reviews.llvm.org/D112086
This changes adds the pipeline config for both 32-bit and 64-bit AIX targets. As well, we add a lit feature `LIBCXX-AIX-FIXME` which is used to mark the failing tests which remain to be investigated on AIX, so that the CI produces a clean build.
Reviewed By: #libc, ldionne
Differential Revision: https://reviews.llvm.org/D111359
Now that Lit supports regular expressions inside XFAIL & friends, it is
much easier to write Lit annotations based on the triple.
Differential Revision: https://reviews.llvm.org/D104747
This fixes a long standing issue where the triple is not always set
consistently in all configurations. This change also moves the
back-deployment Lit features to using the proper target triple
instead of using something ad-hoc.
This will be necessary for using from scratch Lit configuration files
in both normal testing and back-deployment testing.
Differential Revision: https://reviews.llvm.org/D102012
On Windows, one can't use perms::none on a directory to trigger
failures to read the directory entries.
These remaining tests can't use GetWindowsInaccessibleDir() sensibly,
e.g. for tests that rely on toggling accessibility back and forth during
the test, or where the semantics of the dir provided by
GetWindowsInaccessibleDir() doesn't allow for running the ifdeffed tests
meaningfully.
Differential Revision: https://reviews.llvm.org/D97538
If running in a Windows Container, there is no such directory at all.
If running from within bash on Windows Server, the directory seems to
be fully accessible. (The mechanics of this isn't fully understood, and
it doesn't seem to happen on desktop versions.)
If the directory isn't available with the expected behaviour, mark those
individual tests as unsupported. (The test as a whole is considered to
pass, but the unsupported test is mentioned in a test summary printed on
stdout.)
Differential Revision: https://reviews.llvm.org/D98960
Download older roots from Dropbox instead of Green Dragon, which is too
unreliable. Also XFAIL tests that were broken for back-deployment
configurations by D98097.
Differential Revision: https://reviews.llvm.org/D99359
This makes no attempt yet to look into the why/what for each of them,
but makes the CI configuration useful for tracking further regressions.
After looking into each case, they can either be fixed, or converted
into UNSUPPORTED: windows or XFAIL: windows, once the cause is known
and explained.
A number of the filesystem cases can be fixed by patches that are
currently in review.
Differential Revision: https://reviews.llvm.org/D99095
Fix handling of skip_permission_denied on windows; after converting
the return value of GetLastError() to a standard error_code, ec.value()
is in the standard errc range, not a native windows error code. This
was missed in 156180727d.
The directory "C:\System Volume Information" does seem to exist and
have these properties on most relevant contempory setups.
Differential Revision: https://reviews.llvm.org/D98166
Restructure code in directory_entry.obs/file_type_obs.pass.cpp
and directory_entry.obs/hard_link_count.pass.cpp to reduce the
amount of ifdeffery needed.
In file_type_obs.pass.cpp, we can't inline the calls to
env.create_* into the lambda calls (e.g. "test_path(env.create_*())"),
because the lambda removes the referenced file, and the hardlink
must be created while the earlier test file exists.
In hard_link_count.pass.cpp, move restoration of the original
directory permissions to the end of the lambda, so that new
directory entries can be created after the lambda has run once.
Differential Revision: https://reviews.llvm.org/D89948
P1614R2 removes most of `directory_entry`'s member comparison operators, leaving only `operator==` and `operator<=>`. This test should require the comparison expressions to be valid rather than require the member functions to be present so it is correct in both C++17 and C++20 modes.
We used <iostream> in several places where we don't actually need the
full power of <iostream>, and where using basic `std::printf` is enough.
This is better, since `std::printf` can be supported on systems that don't
have a notion of locales, while <iostream> can't.
C++98 and C++03 are effectively aliases as far as Clang is concerned.
As such, allowing both std=c++98 and std=c++03 as Lit parameters is
just slightly confusing, but provides no value. It's similar to allowing
both std=c++17 and std=c++1z, which we don't do.
This was discovered because we had an internal bot that ran the test
suite under both c++98 AND c++03 -- one of which is redundant.
Differential Revision: https://reviews.llvm.org/D80926
Don't use std::filesystem APIs for CWDGuard, use POSIX functions
instead. This way the tests don't rely on the correctness of
the functionality they're testing.
Differential Revision: https://reviews.llvm.org/D78200
Summary:
Instead of storing `static_test_env` (with all the symlinks) in the repo, we create it on the fly to be cross-toolchain-friendly. The primary use case for this are Windows-hosted cross-toolchains. Windows doesn't really have a concept of symlinks. So, when the monorepo is cloned, those symlinks turn to ordinary text files. Previously, if we cross-compiled libc++ for some symlink-friendly system (e. g. Linux) and ran tests on the target system, some tests would fail. This patch makes them pass.
Reviewers: ldionne, #libc
Reviewed By: ldionne, #libc
Subscribers: EricWF, dexonsmith, libcxx-commits
Tags: #libc
Differential Revision: https://reviews.llvm.org/D78200
Instead of storing static_test_env (with all the symlinks) in the repo,
we create it on the fly to be cross-toolchain-friendly. The primary
use case for this are Windows-hosted cross-toolchains. Windows doesn't
really have a concept of symlinks. So, when the monorepo is cloned,
those symlinks turn to ordinary text files. Previously, if we
cross-compiled libc++ for some symlink-friendly system (e. g. Linux) and
ran tests on the target system, some tests would fail. This patch makes
them pass.
Differential Revision: https://reviews.llvm.org/D78200
The libc++ test suite has a lot of old Lit features used to XFAIL tests
and mark them as UNSUPPORTED. Many of them are to workaround problems on
old compilers or old platforms. As time goes by, it is good to go and
clean those up to simplify the configuration of the test suite, and also
to reflect the testing reality. It's not useful to have markup that gives
the impression that e.g. clang-3.3 is supported, when we don't really
test on it anymore (and hence several new tests probably don't have the
necessary markup on them).
Instead of hardcoding absolute paths on the build-host in the executables,
use relative paths from the current working directory. Also, use
FILE_DEPENDENCIES to mark the static test env as being required by
the relevant tests.
Given a SSH executor that copies the files to the remote host properly,
the tests can be run on that remote host.
When I applied r356500 (https://reviews.llvm.org/D59152), I somehow
deleted all of filesystem's tests. I will revert r356500 and re-apply
it properly.
llvm-svn: 356505
Summary:
This patch treats <filesystem> as a first-class citizen of the dylib,
like all other sub-libraries (e.g. <chrono>). As such, it also removes
all special handling for installing the filesystem library separately
or disabling part of the test suite from the lit command line.
Reviewers: mclow.lists, EricWF, serge-sans-paille
Subscribers: mgorny, christof, jkorous, dexonsmith, jfb, jdoerfert, libcxx-commits
Differential Revision: https://reviews.llvm.org/D59152
llvm-svn: 356500
Summary:
Freestanding is *weird*. The standard allows it to differ in a bunch of odd
manners from regular C++, and the committee would like to improve that
situation. I'd like to make libc++ behave better with what freestanding should
be, so that it can be a tool we use in improving the standard. To do that we
need to try stuff out, both with "freestanding the language mode" and
"freestanding the library subset".
Let's start with the super basic: run the libc++ tests in freestanding, using
clang as the compiler, and see what works. The easiest hack to do this:
In utils/libcxx/test/config.py add:
self.cxx.compile_flags += ['-ffreestanding']
Run the tests and they all fail.
Why? Because in freestanding `main` isn't special. This "not special" property
has two effects: main doesn't get mangled, and main isn't allowed to omit its
`return` statement. The first means main gets mangled and the linker can't
create a valid executable for us to test. The second means we spew out warnings
(ew) and the compiler doesn't insert the `return` we omitted, and main just
falls of the end and does whatever undefined behavior (if you're luck, ud2
leading to non-zero return code).
Let's start my work with the basics. This patch changes all libc++ tests to
declare `main` as `int main(int, char**` so it mangles consistently (enabling us
to declare another `extern "C"` main for freestanding which calls the mangled
one), and adds `return 0;` to all places where it was missing. This touches 6124
files, and I apologize.
The former was done with The Magic Of Sed.
The later was done with a (not quite correct but decent) clang tool:
https://gist.github.com/jfbastien/793819ff360baa845483dde81170feed
This works for most tests, though I did have to adjust a few places when e.g.
the test runs with `-x c`, macros are used for main (such as for the filesystem
tests), etc.
Once this is in we can create a freestanding bot which will prevent further
regressions. After that, we can start the real work of supporting C++
freestanding fairly well in libc++.
<rdar://problem/47754795>
Reviewers: ldionne, mclow.lists, EricWF
Subscribers: christof, jkorous, dexonsmith, arphaman, miyuki, libcxx-commits
Differential Revision: https://reviews.llvm.org/D57624
llvm-svn: 353086
to reflect the new license. These used slightly different spellings that
defeated my regular expressions.
We understand that people may be surprised that we're moving the header
entirely to discuss the new license. We checked this carefully with the
Foundation's lawyer and we believe this is the correct approach.
Essentially, all code in the project is now made available by the LLVM
project under our new license, so you will see that the license headers
include that license only. Some of our contributors have contributed
code under our old license, and accordingly, we have retained a copy of
our old license notice in the top-level files in each project and
repository.
llvm-svn: 351648
This patch implements the <filesystem> header and uses that
to provide <experimental/filesystem>.
Unlike other standard headers, the symbols needed for <filesystem>
have not yet been placed in libc++.so. Instead they live in the
new libc++fs.a library. Users of filesystem are required to link this
library. (Also note that libc++experimental no longer contains the
definition of <experimental/filesystem>, which now requires linking libc++fs).
The reason for keeping <filesystem> out of the dylib for now is that
it's still somewhat experimental, and the possibility of requiring an
ABI breaking change is very real. In the future the symbols will likely
be moved into the dylib, or the dylib will be made to link libc++fs automagically).
Note that moving the symbols out of libc++experimental may break user builds
until they update to -lc++fs. This should be OK, because the experimental
library provides no stability guarantees. However, I plan on looking into
ways we can force libc++experimental to automagically link libc++fs.
In order to use a single implementation and set of tests for <filesystem>, it
has been placed in a special `__fs` namespace. This namespace is inline in
C++17 onward, but not before that. As such implementation is available
in C++11 onward, but no filesystem namespace is present "directly", and
as such name conflicts shouldn't occur in C++11 or C++14.
llvm-svn: 338093