Summary:
We currently allow any completion handler to read and manipulate the list of matches we
calculated so far. This leads to a few problems:
Firstly, a completion handler's logic can now depend on previously calculated results
by another handlers. No completion handler should have such an implicit dependency,
but the current API makes it likely that this could happen (or already happens). Especially
the fact that some completion handler deleted all previously calculated results can mess
things up right now.
Secondly, all completion handlers have knowledge about our internal data structures with
this API. This makes refactoring this internal data structure much harder than it should be.
Especially planned changes like the support of descriptions for completions are currently
giant patches because we have to refactor every single completion handler.
This patch narrows the contract the CompletionRequest has with the different handlers to:
1. A handler can suggest a completion.
2. A handler can ask how many suggestions we already have.
Point 2 obviously means we still have a dependency left between the different handlers, but
getting rid of this is too large to just append it to this patch.
Otherwise this patch just completely hides the internal StringList to the different handlers.
The CompletionRequest API now also ensures that the list of completions is unique and we
don't suggest the same value multiple times to the user. This property has been so far only
been ensured by the `Option` handler, but is now applied globally. This is part of this patch
as the OptionHandler is no longer able to implement this functionality itself.
Reviewers: jingham, davide, labath
Reviewed By: davide
Subscribers: lldb-commits
Differential Revision: https://reviews.llvm.org/D49322
llvm-svn: 338151
Summary:
As suggested in D48796, this patch replaces even more internal calls that were using the old
completion API style with a single CompletionRequest. In some cases we also pass an option
vector/index, but as we don't always have this information, it currently is not part of the
CompletionRequest class.
The constructor of the CompletionRequest is now also more sensible. You only pass the
user input, cursor position and your list of matches to the request and the rest will be
inferred (using the same code we used before to calculate this). You also have to pass these
match window parameters to it, even though they are unused right now.
The patch shouldn't change any behavior.
Reviewers: jingham
Reviewed By: jingham
Subscribers: lldb-commits
Differential Revision: https://reviews.llvm.org/D48976
llvm-svn: 337031
Summary:
A subset of the LLDB commands follows this command line interface style:
<command name> [arguments] -- <string suffix>
The parsing code for this interface has been so far been duplicated into the different
command objects which makes it hard to maintain and reuse elsewhere.
This patches improves the situation by adding a OptionsWithRaw class that centralizes
the parsing logic and allows easier testing. The different commands now just call this class to
extract the arguments and the raw suffix from the provided user input.
Reviewers: jingham
Reviewed By: jingham
Subscribers: mgorny, lldb-commits
Differential Revision: https://reviews.llvm.org/D49106
llvm-svn: 336723
Summary:
This patch refactors the internal completion API. It now takes (as far as possible) a single
CompletionRequest object instead o half a dozen in/out/in-out parameters. The CompletionRequest
contains a common superset of the different parameters as far as it makes sense. This includes
the raw command line string and raw cursor position, which should make the `expr` command
possible to implement (at least without hacks that reconstruct the command line from the args).
This patch is not intended to change the observable behavior of lldb in any way. It's also as
minimal as possible and doesn't attempt to fix all the problems the API has.
Some Q&A:
Q: Why is this not fixing all the problems in the completion API?
A: Because is a blocker for the expr command completion which I want to get in ASAP. This is the
smallest patch that unblocks the expr completion patch and which allows trivial refactoring in the future.
The patch also doesn't really change the internal information flow in the API, so that hopefully
saves us from ever having to revert and resubmit this humongous patch.
Q: Can we merge all the copy-pasted code in the completion methods
(like computing the current incomplete arg) into CompletionRequest class?
A: Yes, but it's out of scope for this patch.
Q: Why the `word_complete = request.GetWordComplete(); ... ` pattern?
A: I don't want to add a getter that returns a reference to the internal integer. So we have
to use a temporary variable and the Getter/Setter instead. We don't throw exceptions
from what I can tell, so the behavior doesn't change.
Q: Why are we not owning the list of matches?
A: Because that's how the previous API works. But that should be fixed too (in another patch).
Q: Can we make the constructor simpler and compute some of the values from the plain command?
A: I think this works, but I rather want to have this in a follow up commit. Especially when making nested
request it's a bit awkward that the parsed arguments behave as both input/output (as we should in theory
propagate the changes on the nested request back to the parent request if we don't want to change the
behavior too much).
Q: Can't we pass one const request object and then just return another result object instead of mixing
them together in one in/out parameter?
A: It's hard to get keep the same behavior with that pattern, but I think we can also get a nice API with just
a single request object. If we make all input parameters read-only, we have a clear separation between what
is actually an input and what an output parameter (and hopefully we get rid of the in-out parameters).
Q: Can we throw out the 'match' variables that are not implemented according to the comment?
A: We currently just forward them as in the old code to the different methods, even though I think
they are really not used. We can easily remove and readd them once every single completion method just
takes a CompletionRequest, but for now I prefer NFC behavior from the perspective of the API user.
Reviewers: davide, jingham, labath
Reviewed By: jingham
Subscribers: mgorny, friss, lldb-commits
Differential Revision: https://reviews.llvm.org/D48796
llvm-svn: 336146
This is intended as a clean up after the big clang-format commit
(r280751), which unfortunately resulted in many of the comment
paragraphs in LLDB being very hard to read.
FYI, the script I used was:
import textwrap
import commands
import os
import sys
import re
tmp = "%s.tmp"%sys.argv[1]
out = open(tmp, "w+")
with open(sys.argv[1], "r") as f:
header = ""
text = ""
comment = re.compile(r'^( *//) ([^ ].*)$')
special = re.compile(r'^((([A-Z]+[: ])|([0-9]+ )).*)|(.*;)$')
for line in f:
match = comment.match(line)
if match and not special.match(match.group(2)):
# skip intentionally short comments.
if not text and len(match.group(2)) < 40:
out.write(line)
continue
if text:
text += " " + match.group(2)
else:
header = match.group(1)
text = match.group(2)
continue
if text:
filled = textwrap.wrap(text, width=(78-len(header)),
break_long_words=False)
for l in filled:
out.write(header+" "+l+'\n')
text = ""
out.write(line)
os.rename(tmp, sys.argv[1])
Differential Revision: https://reviews.llvm.org/D46144
llvm-svn: 331197
Summary:
The args class is used in plenty of places (a lot of them in the lower lldb
layers) for representing a list of arguments, and most of these places don't
care about option parsing. Moving the option parsing out of the class removes
the largest external dependency (there are a couple more, but these are in
static functions), and brings us closer to being able to move it to the
Utility module).
The new home for these functions is the Options class, which was already used
as an argument to the parse calls, so this just inverts the dependency between
the two.
The functions are themselves are mainly just copied -- the biggest functional
change I've made to them is to avoid modifying the input Args argument (getopt
likes to permute the argument vector), as it was weird to have another class
reorder the entries in Args class. So now the functions don't modify the input
arguments, and (for those where it makes sense) return a new Args vector
instead. I've also made the addition of a "fake arg0" (required for getopt
compatibility) an implementation detail rather than a part of interface.
While doing that I noticed that ParseForCompletion function was recording the
option indexes in the shuffled vector, but then the consumer was looking up the
entries in the unshuffled one. This manifested itself as us not being able to
complete "watchpoint set variable foo --" (because getopt would move "foo" to
the end). Surprisingly all other completions (e.g. "watchpoint set variable foo
--w") were not affected by this. However, I couldn't find a comprehensive test
for command argument completion, so I consolidated the existing tests and added
a bunch of new ones.
Reviewers: davide, jingham, zturner
Subscribers: lldb-commits
Differential Revision: https://reviews.llvm.org/D43837
llvm-svn: 327110
The rationale here is that ArchSpec is used throughout the codebase,
including in places which should not depend on the rest of the code in
the Core module.
This commit touches many files, but most of it is just renaming of
#include lines. In a couple of cases, I removed the #include ArchSpec
line altogether, as the file was not using it. In one or two places,
this necessitated adding other #includes like lldb-private-defines.h.
llvm-svn: 318048
When introduced, breakpoint names were just tags that you could
apply to breakpoints that would allow you to refer to a breakpoint
when you couldn't capture the ID, or to refer to a collection of
breakpoints.
This change makes the names independent holders of breakpoint options
that you can then apply to breakpoints when you add the name to the
breakpoint. It adds the "breakpoint name configure" command to set
up or reconfigure breakpoint names. There is also full support for
then in the SB API, including a new SBBreakpointName class.
The connection between the name and the breakpoints
sharing the name remains live, so if you reconfigure the name, all the
breakpoint options all change as well. This allows a quick way
to share complex breakpoint behavior among a bunch of breakpoints, and
a convenient way to iterate on the set.
You can also create a name from a breakpoint, allowing a quick way
to copy options from one breakpoint to another.
I also added the ability to make hidden and delete/disable protected
names. When applied to a breakpoint, you will only be able to list,
delete or disable that breakpoint if you refer to it explicitly by ID.
This feature will allow GUI's that need to use breakpoints for their
own purposes to keep their breakpoints from getting accidentally
disabled or deleted.
<rdar://problem/22094452>
llvm-svn: 313292
Now -shlib flag can be provided alongside with names of symbols files:
(lldb) target symbols add --shlib stripper-lib.so unstripper-lib.so
This is helpful when default matching mechanisms by name and UUID
can't find a module, and the user needs to explicitly specify
which module the given symbol file belongs to.
Differential Revision: https://reviews.llvm.org/D35607
llvm-svn: 308933
This renames the LLDB error class to Status, as discussed
on the lldb-dev mailing list.
A change of this magnitude cannot easily be done without
find and replace, but that has potential to catch unwanted
occurrences of common strings such as "Error". Every effort
was made to find all the obvious things such as the word "Error"
appearing in a string, etc, but it's possible there are still
some lingering occurences left around. Hopefully nothing too
serious.
llvm-svn: 302872
This is a large API change that removes the two functions from
StreamString that return a std::string& and a const std::string&,
and instead provide one function which returns a StringRef.
Direct access to the underlying buffer violates the concept of
a "stream" which is intended to provide forward only access,
and makes porting to llvm::raw_ostream more difficult in the
future.
Differential Revision: https://reviews.llvm.org/D26698
llvm-svn: 287152
This is better for a number of reasons. Mostly style, but also:
1) Signed-unsigned comparison warnings disappear since there is
no loop index.
2) Iterating with the range-for style gives you back an entry
that has more than just a const char*, so it's more efficient
and more useful.
3) Makes code safter since the type system enforces that it's
impossible to index out of bounds.
llvm-svn: 283413
This converts Args::Unshift, Args::AddOrReplaceEnvironmentVariable,
and Args::ContainsEnvironmentVariable to use StringRefs. The code
is also simplified somewhat as a result.
llvm-svn: 281942
This patch also marks the const char* versions as =delete to prevent
their use. This has the potential to cause build breakages on some
platforms which I can't compile. I have tested on Windows, Linux,
and OSX. Best practices for fixing broken callsites are outlined in
Args.h in a comment above the deleted function declarations.
Eventually we can remove these =delete declarations, but for now they
are important to make sure that all implicit conversions from
const char * are manually audited to make sure that they do not invoke a
conversion from nullptr.
llvm-svn: 281919
*** to conform to clang-format’s LLVM style. This kind of mass change has
*** two obvious implications:
Firstly, merging this particular commit into a downstream fork may be a huge
effort. Alternatively, it may be worth merging all changes up to this commit,
performing the same reformatting operation locally, and then discarding the
merge for this particular commit. The commands used to accomplish this
reformatting were as follows (with current working directory as the root of
the repository):
find . \( -iname "*.c" -or -iname "*.cpp" -or -iname "*.h" -or -iname "*.mm" \) -exec clang-format -i {} +
find . -iname "*.py" -exec autopep8 --in-place --aggressive --aggressive {} + ;
The version of clang-format used was 3.9.0, and autopep8 was 1.2.4.
Secondly, “blame” style tools will generally point to this commit instead of
a meaningful prior commit. There are alternatives available that will attempt
to look through this change and find the appropriate prior commit. YMMV.
llvm-svn: 280751
Options used to store a reference to the CommandInterpreter instance
in the base Options class. This made it impossible to parse options
independent of a CommandInterpreter.
This change removes the reference from the base class. Instead, it
modifies the options-parsing-related methods to take an
ExecutionContext pointer, which the options may inspect if they need
to do so.
Closes https://reviews.llvm.org/D23416
Reviewers: clayborg, jingham
llvm-svn: 278440
review it for consistency, accuracy, and clarity. These changes attempt to
address all of the above while keeping the text relatively terse.
<rdar://problem/24868841>
llvm-svn: 275485
This solves issues such as 'apropos foo' returning valid matches just because syntax examples happen to use 'foo' as a placeholder token
Fixes rdar://9043025
llvm-svn: 264123
This cleans things up such CommandAlias essentially can work as its own object; the aliases still live in a separate map, but are now just full-fledged CommandObjectSPs
This patch also cleans up help generation for aliases, allows aliases to vend their own help, and adds a tweak such that "dash-dash aliases", such as po, don't show the list of options for their underlying command, since those can't be provided anyway
I plan to fix up a few more things here, and then add a test case and proclaim victory
llvm-svn: 263499
Turns out that most of the code that runs expressions (e.g. the ObjC runtime grubber) on
behalf of the expression parser was using the currently selected thread. But sometimes,
e.g. when we are evaluating breakpoint conditions/commands, we don't select the thread
we're running on, we instead set the context for the interpreter, and explicitly pass
that to other callers. That wasn't getting communicated to these utility expressions, so
they would run on some other thread instead, and that could cause a variety of subtle and
hard to reproduce problems.
I also went through the commands and cleaned up the use of GetSelectedThread. All those
uses should have been trying the thread in the m_exe_ctx belonging to the command object
first. It would actually have been pretty hard to get misbehavior in these cases, but for
correctness sake it is good to make this usage consistent.
<rdar://problem/24978569>
llvm-svn: 263326
- move alias help generation to CommandAlias, out of CommandInterpreter
- make alias creation use argument strings instead of OptionArgVectorSP; the former is a more reasonable currency than the latter
- remove m_is_alias from CommandObject, it wasn't actually being used
llvm-svn: 262912
Right now, obviously, this is just the pair of (CommandObjectSP,OptionArgVectorSP), so NFC
This is step one of a larger - and tricky - refactoring which will turn command aliases into interesting objects instead of passive storage that the command interpreter does smart things to
This refactoring, in turn, will allow us to do interesting things with aliases, such as intelligent and customizable help
llvm-svn: 262900
This makes it so that help language provides help on the language command and help source-language provides the list of source languages one can pass as an option
Fixes rdar://24869942
llvm-svn: 262259
Existing commands supplying this type of help content have been reworked to take advantage of the changes. In addition to formatting changes, content was changes for accuracy and clarity purposes.
<rdar://problem/21269977>
llvm-svn: 242122
Since interaction with the python interpreter is moving towards
being more isolated, we won't be able to include this header from
normal files anymore, all includes of it should be localized to
the python library which will live under source/bindings/API/Python
after a future patch.
None of the files that were including this header actually depended
on it anyway, so it was just a dead include in every single instance.
llvm-svn: 238581
This works for Python commands defined via a class (implement get_flags on your class) and C++ plugin commands (which can call SBCommand::GetFlags()/SetFlags())
Flags allow features such as not letting the command run if there's no target, or if the process is not stopped, ...
Commands could always check for these things themselves, but having these accessible via flags makes custom commands more consistent with built-in ones
llvm-svn: 238286
Removed some unused variables, added some consts, changed some casts
to const_cast. I don't think any of these changes are very
controversial.
Differential Revision: http://reviews.llvm.org/D9674
llvm-svn: 237218
breakpoints, for instance on the class of the thrown object.
This change doesn't actually make that work, the part where we
extract the thrown object type from the throw site isn't done yet.
This provides a general programmatic "precondition" that you can add
to breakpoints to give them the ability to do filtering on the LLDB
side before we pass the stop on to the user-provided conditions &
callbacks.
llvm-svn: 235538
There were a couple of real bugs here regarding error checking and
signed/unsigned comparisons, but mostly these were just noise.
There was one class of bugs fixed here which is particularly
annoying, dealing with MSVC's non-standard behavior regarding
the underlying type of enums. See the comment in
lldb-enumerations.h for details. In short, from now on please use
FLAGS_ENUM and FLAGS_ANONYMOUS_ENUM when defining enums which
contain values larger than can fit into a signed integer.
llvm-svn: 233943
Debugger.h is a huge file that gets included everywhere, and
FormatManager.h brings in a ton of unnecessary stuff and doesn't
even use anything from it in the header.
llvm-svn: 231161
names can then be used in place of breakpoint id's or breakpoint id
ranges in all the commands that operate on breakpoints.
<rdar://problem/10103959>
llvm-svn: 224392
in the "dummy-target". The dummy target breakpoints prime all future
targets. Breakpoints set before any target is created (e.g. breakpoints
in ~/.lldbinit) automatically get set in the dummy target. You can also
list, add & delete breakpoints from the dummy target using the "-D" flag,
which is supported by most of the breakpoint commands.
This removes a long-standing wart in lldb...
<rdar://problem/10881487>
llvm-svn: 223565
type format info
type summary info
type synthetic info
These commands all take an expression, evaluate it, and show which of the respective formatter (if any) applies to the result of the expression
Fixes rdar://12059317
llvm-svn: 223511
(e.g. breakpoints, stop-hooks) before we have any targets - for instance in
your ~/.lldbinit file. These will then get copied over to any new targets
that get created. So far, you can only make stop-hooks.
Breakpoints will have to learn to move themselves from target to target for
us to get them from no-target to new-target.
We should also make a command & SB API way to prime this ur-target.
llvm-svn: 222600
requirement for a command instead of the smallest. e.g. if a command
requires a Target, Process, Thread, and Frame, and none of those
are available, report the largest -- Target -- as being missing
instead of the smallest -- Frame.
Patch by Paul Osmialowski.
llvm-svn: 218181
Also, in case they don't define any, change the default from "Run Python function <blah>" into "For more information run help <blah>"
The core issue here is that Python only allows one docstring per function, so we can't really attach both a short and a long help to the same command easily
There are alternatives but this is not a pressing enough concern to go through the motions quite yet
Fixes rdar://18322737
llvm-svn: 217795
CommandReturnObject. Otherwise, all the overridden command
can do is say it overrode the command, not say what it did...
Also removed the duplicate definition of CommandOverrideCallback
from the private interfaces.
Now to figure out how to get this through the SB API's...
<rdar://problem/17911629>
llvm-svn: 214938
This is a mechanical change addressing the various sign comparison warnings that
are identified by both clang and gcc. This helps cleanup some of the warning
spew that occurs during builds.
llvm-svn: 205390
What was happening was:
1 - Xcode ran and stopped and was doing work on thread 2
2 - Users would type something in Xcode console on thread 1
3 - thread 3 would be running command interpreter thread and try to execute command but get "failed to get API lock" error for any command that wanted the target API lock (like "expression")
<rdar://problem/15775016>
llvm-svn: 200997
DumpValueObject() 2.0
This checkin restores pre-Xcode5 functionality to the "po" (expr -O) command:
- expr now has a new --description-verbosity (-v) argument, which takes either compact or full as a value (-v is the same as -vfull)
When the full mode is on, "po" will show the extended output with type name, persistent variable name and value, as in
(lldb) expr -O -v -- foo
(id) $0 = 0x000000010010baf0 {
1 = 2;
2 = 3;
}
When -v is omitted, or -vcompact is passed, the Xcode5-style output will be shown, as in
(lldb) expr -O -- foo
{
1 = 2;
2 = 3;
}
- for a non-ObjectiveC object, LLDB will still try to retrieve a summary and/or value to display
(lldb) po 5
5
-v also works in this mode
(lldb) expr -O -vfull -- 5
(int) $4 = 5
On top of that, this is a major refactoring of the ValueObject printing code. The functionality is now factored into a ValueObjectPrinter class for easier maintenance in the future
DumpValueObject() was turned into an instance method ValueObject::Dump() which simply calls through to the printer code, Dump_Impl has been removed
Test case to follow
llvm-svn: 191694
Summary:
This merge brings in the improved 'platform' command that knows how to
interface with remote machines; that is, query OS/kernel information, push
and pull files, run shell commands, etc... and implementation for the new
communication packets that back that interface, at least on Darwin based
operating systems via the POSIXPlatform class. Linux support is coming soon.
Verified the test suite runs cleanly on Linux (x86_64), build OK on Mac OS
X Mountain Lion.
Additional improvements (not in the source SVN branch 'lldb-platform-work'):
- cmake build scripts for lldb-platform
- cleanup test suite
- documentation stub for qPlatform_RunCommand
- use log class instead of printf() directly
- reverted work-in-progress-looking changes from test/types/TestAbstract.py that work towards running the test suite remotely.
- add new logging category 'platform'
Reviewers: Matt Kopec, Greg Clayton
Review: http://llvm-reviews.chandlerc.com/D1493
llvm-svn: 189295
Only add the — (double dash) separator to a command syntax if it has any options to be separated from arguments
Also remove the unused Translate() method from CommandObject
llvm-svn: 184163
If you type help command <word> <word> <word> <missingSubCommand> (e.g. help script import or help type summary fake), you will get help on the deepest matched command word (i.e. script or type summary in the examples)
Also, reworked the logic for commands to produce their help to make it more object-oriented
llvm-svn: 183822
LLDB now can use a single dash for all long options for all commands form the command line and from the command interpreter. This involved just switching all calls from getopt_long() to getopt_long_only().
llvm-svn: 178789
Calculate "can branch" using the MC API's rather than our hand-rolled regex'es.
As extra credit, allow setting the disassembly flavor for x86 based architectures to intel or att.
<rdar://problem/11319574>
<rdar://problem/9329275>
llvm-svn: 176392
Replacing the address argument type with address-expression in cases where StringToAddress() is used, and hence an expression can be passed where previously only a numeric address was allowed
This makes the documentation more clear and helps users discover that they can truly pass in an expression in these situations.
llvm-svn: 173753
Major fixed to allow reading files that are over 4GB. The main problems were that the DataExtractor was using 32 bit offsets as a data cursor, and since we mmap all of our object files we could run into cases where if we had a very large core file that was over 4GB, we were running into the 4GB boundary.
So I defined a new "lldb::offset_t" which should be used for all file offsets.
After making this change, I enabled warnings for data loss and for enexpected implicit conversions temporarily and found a ton of things that I fixed.
Any functions that take an index internally, should use "size_t" for any indexes and also should return "size_t" for any sizes of collections.
llvm-svn: 173463
enum
{
//----------------------------------------------------------------------
// eFlagRequiresTarget
//
// Ensures a valid target is contained in m_exe_ctx prior to executing
// the command. If a target doesn't exist or is invalid, the command
// will fail and CommandObject::GetInvalidTargetDescription() will be
// returned as the error. CommandObject subclasses can override the
// virtual function for GetInvalidTargetDescription() to provide custom
// strings when needed.
//----------------------------------------------------------------------
eFlagRequiresTarget = (1u << 0),
//----------------------------------------------------------------------
// eFlagRequiresProcess
//
// Ensures a valid process is contained in m_exe_ctx prior to executing
// the command. If a process doesn't exist or is invalid, the command
// will fail and CommandObject::GetInvalidProcessDescription() will be
// returned as the error. CommandObject subclasses can override the
// virtual function for GetInvalidProcessDescription() to provide custom
// strings when needed.
//----------------------------------------------------------------------
eFlagRequiresProcess = (1u << 1),
//----------------------------------------------------------------------
// eFlagRequiresThread
//
// Ensures a valid thread is contained in m_exe_ctx prior to executing
// the command. If a thread doesn't exist or is invalid, the command
// will fail and CommandObject::GetInvalidThreadDescription() will be
// returned as the error. CommandObject subclasses can override the
// virtual function for GetInvalidThreadDescription() to provide custom
// strings when needed.
//----------------------------------------------------------------------
eFlagRequiresThread = (1u << 2),
//----------------------------------------------------------------------
// eFlagRequiresFrame
//
// Ensures a valid frame is contained in m_exe_ctx prior to executing
// the command. If a frame doesn't exist or is invalid, the command
// will fail and CommandObject::GetInvalidFrameDescription() will be
// returned as the error. CommandObject subclasses can override the
// virtual function for GetInvalidFrameDescription() to provide custom
// strings when needed.
//----------------------------------------------------------------------
eFlagRequiresFrame = (1u << 3),
//----------------------------------------------------------------------
// eFlagRequiresRegContext
//
// Ensures a valid register context (from the selected frame if there
// is a frame in m_exe_ctx, or from the selected thread from m_exe_ctx)
// is availble from m_exe_ctx prior to executing the command. If a
// target doesn't exist or is invalid, the command will fail and
// CommandObject::GetInvalidRegContextDescription() will be returned as
// the error. CommandObject subclasses can override the virtual function
// for GetInvalidRegContextDescription() to provide custom strings when
// needed.
//----------------------------------------------------------------------
eFlagRequiresRegContext = (1u << 4),
//----------------------------------------------------------------------
// eFlagTryTargetAPILock
//
// Attempts to acquire the target lock if a target is selected in the
// command interpreter. If the command object fails to acquire the API
// lock, the command will fail with an appropriate error message.
//----------------------------------------------------------------------
eFlagTryTargetAPILock = (1u << 5),
//----------------------------------------------------------------------
// eFlagProcessMustBeLaunched
//
// Verifies that there is a launched process in m_exe_ctx, if there
// isn't, the command will fail with an appropriate error message.
//----------------------------------------------------------------------
eFlagProcessMustBeLaunched = (1u << 6),
//----------------------------------------------------------------------
// eFlagProcessMustBePaused
//
// Verifies that there is a paused process in m_exe_ctx, if there
// isn't, the command will fail with an appropriate error message.
//----------------------------------------------------------------------
eFlagProcessMustBePaused = (1u << 7)
};
Now each command object contains a "ExecutionContext m_exe_ctx;" member variable that gets initialized prior to running the command. The validity of the target objects in m_exe_ctx are checked to ensure that any target/process/thread/frame/reg context that are required are valid prior to executing the command. Each command object also contains a Mutex::Locker m_api_locker which gets used if eFlagTryTargetAPILock is set. This centralizes a lot of checking code that was previously and inconsistently implemented across many commands.
llvm-svn: 171990
- add new header lldb-python.h to be included before other system headers
- short term fix (eventually python dependencies must be cleaned up)
Patch by Matt Kopec!
llvm-svn: 169341
- use const char* instead of char* as needed in ObjC language runtime plugin
- use int to iterate through enum (operator++ on enum not defined)
- use initializer list instead of inline initialization of const field
llvm-svn: 169185
There was a generic catch-all type for path arguments
called "eArgTypePath," and a specialized version
called "eArgTypeFilename." It turns out all the
cases where we used eArgTypePath we could have
used Filename or we explicitly meant a directory.
I changed Path to DirectoryName, made it use the
directory completer, and rationalized the uses of
Path.
<rdar://problem/12559915>
llvm-svn: 166533
options:
- added help ("help language") listing the
possible options;
- added the possibility of synonyms for language
names, in this case "ObjC" for "Objective-C";
and
- made matching against language names case
insensitive.
This should improve discoverability.
<rdar://problem/12552359>
llvm-svn: 166457
I added the ability for a process plug-in to implement custom commands. All the lldb_private::Process plug-in has to do is override:
virtual CommandObject *
GetPluginCommandObject();
This object returned should be a multi-word command that vends LLDB commands. There is a sample implementation in ProcessGDBRemote that is hollowed out. It is intended to be used for sending a custom packet, though the body of the command execute function has yet to be implemented!
llvm-svn: 165861
Execute which was never going to get run and another ExecuteRawCommandString. Took the knowledge of how
to prepare raw & parsed commands out of CommandInterpreter and put it in CommandObject where it belongs.
Also took all the cases where there were the subcommands of Multiword commands declared in the .h file for
the overall command and moved them into the .cpp file.
Made the CommandObject flags work for raw as well as parsed commands.
Made "expr" use the flags so that it requires you to be paused to run "expr".
llvm-svn: 158235
A local std::string was being filled in and then the function would return "s.c_str()".
A local StreamString (which contains a std::string) was being filled in, and essentially also returning the c string from the std::string, though it was in a the StreamString class.
The fix was to not do this by passing a stream object into StringList::Join() and fix the "arch_helper()" function to do what it should: cache the result in a global.
llvm-svn: 157519
Make 'help arch' return the list of supported architectures.
Add a convenience method StringList::Join(const char *separator) which is called from the help function for 'arch'.
Also add a simple test case.
llvm-svn: 157507
Added the ability to override command line commands. In some cases GUI interfaces
might want to intercept commands like "quit" or "process launch" (which might cause
the process to re-run). They can now do so by overriding/intercepting commands
by using functions added to SBCommandInterpreter using a callback function. If the
callback function returns true, the command is assumed to be handled. If false
is returned the command should be evaluated normally.
Adopted this up in the Driver.cpp for intercepting the "quit" command.
llvm-svn: 151708
the '-e' option (for watching of an address) to be present.
Update some existing test cases with the required option and add some more test cases.
Since the '-v' option takes <variable-name> and the '-e' option takes <expr> as the command arg,
the existing infrastructure for generating the option usage can produce confusing help message,
like:
watchpoint set -e [-w <watch-type>] [-x <byte-size>] <variable-name | expr>
watchpoint set -v [-w <watch-type>] [-x <byte-size>] <variable-name | expr>
The solution adopted is to provide an extra member field to the struct CommandArgumentData called
(uint32_t)arg_opt_set_association, whose purpose is to link this particular argument data with some
option set(s). Also modify the signature of CommandObject::GetFormattedCommandArguments() to:
GetFormattedCommandArguments (Stream &str, uint32_t opt_set_mask = LLDB_OPT_SET_ALL)
it now takes an additional opt_set_mask which can be used to generate a filtered formatted command
args for help message.
Options::GenerateOptionUsage() impl is modified to call the GetFormattedCommandArguments() appropriately.
So that the help message now looks like:
watchpoint set -e [-w <watch-type>] [-x <byte-size>] <expr>
watchpoint set -v [-w <watch-type>] [-x <byte-size>] <variable-name>
rdar://problem/10703256
llvm-svn: 150032
http://llvm.org/viewvc/llvm-project?rev=148491&view=rev check in broke the argument completion
for "settings set th", followed by TAB. Provide a way for commands who want raw commands to
hook into the completion mechanism.
llvm-svn: 148500
to include -- in sample command lines. Now LLDB
prints
expression [-f <format>] -- <expr>
instead of
expression [-f <format>] <expr>
and also adds a new example line:
expression <expr>
to show that in the absense of arguments the --
can be ommitted.
llvm-svn: 147540
a) adds a new --synchronicity (-s) setting for "command script add" that allows the user to decide if scripted commands should run synchronously or asynchronously (which can make a difference in how events are handled)
b) clears up several error messages
c) adds a new --allow-reload (-r) setting for "command script import" that allows the user to reload a module even if it has already been imported before
d) allows filename completion for "command script import" (much like what happens for "target create")
e) prevents "command script add" from replacing built-in commands with scripted commands
f) changes AddUserCommand() to take an std::string instead of a const char* (for performance reasons)
plus, it fixes an issue in "type summary add" command handling which caused several test suite errors
llvm-svn: 144035
lldb_private::Error objects the rules are:
- short strings that don't start with a capitol letter unless the name is a
class or anything else that is always capitolized
- no trailing newline character
- should be one line if possible
Implemented a first pass at adding "--gdb-format" support to anything that
accepts format with optional size/count.
llvm-svn: 142999
Add eArgTypeWatchpointID and eArgTypeWatchpointIDRange to the CommandArgumentType enums and
modify the signature of CommandObject::AddIDsArgumentData() from:
AddIDsArgumentData(CommandArgumentEntry &arg)
to:
AddIDsArgumentData(CommandArgumentEntry &arg, CommandArgumentType ID, CommandArgumentType IDRange)
to accommodate.
llvm-svn: 140346
shared pointers.
Changed the ExecutionContext over to use shared pointers for
the target, process, thread and frame since these objects can
easily go away at any time and any object that was holding onto
an ExecutionContext was running the risk of using a bad object.
Now that the shared pointers for target, process, thread and
frame are just a single pointer (they all use the instrusive
shared pointers) the execution context is much safer and still
the same size.
Made the shared pointers in the the ExecutionContext class protected
and made accessors for all of the various ways to get at the pointers,
references, and shared pointers.
llvm-svn: 140298
to the command argument entry. Add a static helper function:
CommandObject::AddIDsArgumentData(CommandArgumentEntry &arg)
to be used from CommandObjectBreakpoint.cpp. The helper function could also be useful
for commands in the future to manipulate watchpoints.
llvm-svn: 140221
stdarg formats to use __attribute__ format so the compiler can flag
incorrect uses. Fix all incorrect uses. Most of these are innocuous,
a few were resulting in crashes.
llvm-svn: 140185
o Rename from OptionGroupWatchpoint::WatchMode to OptionGroupWatchpoint::WatchType,
and CommandArgumentType::eArgTypeWatchMode to CommandArgumentType::eArgTypeWatchType.
Update the sources to reflect the change.
o Add a CreateWatchpointLocation() method to Target class, which is currently not implmeneted
(returns an empty WatchpointLocationSP object). Add logic to CommandObjectFrame::Execute()
to exercise the added API for creating a watchpoint location.
llvm-svn: 139560
Raphael Isemann