In r359354 a GetDebugger() method was added to the CommandObject class,
so that we didn't have to go through the command interpreter to obtain
the script interpreter. This patch simplifies other call sites where
m_interpreter.GetDebugger() was used, and replaces them with a shorter
call to the new method.
llvm-svn: 359373
This is part two of the change started in r359330. This patch moves the
ownership of the script interpreter from the command interpreter into
the debugger. I would've preferred to remove the lazy initialization,
however the fact that the scripting language is set after the debugger
is created makes that tricky. So for now this does exactly the same
thing as when it was under the command interpreter. The result is that
this patch is fully NFC.
Differential revision: https://reviews.llvm.org/D61211
llvm-svn: 359354
A lot of comments in LLDB are surrounded by an ASCII line to delimit the
begging and end of the comment.
Its use is not really consistent across the code base, sometimes the
lines are longer, sometimes they are shorter and sometimes they are
omitted. Furthermore, it looks kind of weird with the 80 column limit,
where the comment actually extends past the line, but not by much.
Furthermore, when /// is used for Doxygen comments, it looks
particularly odd. And when // is used, it incorrectly gives the
impression that it's actually a Doxygen comment.
I assume these lines were added to improve distinguishing between
comments and code. However, given that todays editors and IDEs do a
great job at highlighting comments, I think it's worth to drop this for
the sake of consistency. The alternative is fixing all the
inconsistencies, which would create a lot more churn.
Differential revision: https://reviews.llvm.org/D60508
llvm-svn: 358135
Summary:
Within .lldbinit, regex commands can be structured as a list of substitutions over
multiple lines. It's possible that this is uninentional, but it works and has
benefits.
For example:
command regex <command-name>
s/pat1/repl1/
s/pat2/repl2/
...
I use this form of `command regex` in my `~/.lldbinit`, because it makes it
clearer to write and read compared to a single line definition, because
multiline substitutions don't need to be quoted, and are broken up one per line.
However, multiline definitions result in usage instructions being printed for
each use. The result is that every time I run `lldb`, I get a dozen or more
lines of noise. With this change, the instructions are only printed when
`command regex` is invoked interactively, or from a terminal, neither of which
are true when lldb is sourcing `~/.lldbinit`.
Reviewers: clayborg, jingham
Reviewed By: clayborg
Subscribers: jdoerfert, kastiglione, xiaobai, keith, lldb-commits
Differential Revision: https://reviews.llvm.org/D48752
llvm-svn: 355793
This patch adds the necessary logic to capture and replay commands
entered into the command interpreter. A DataRecorder shadows the input
and writes its data to a know file. During replay this file is used as
the command interpreter's input.
It's possible to the command interpreter more than once, with a
different input source. We support this scenario by using multiple
buffers. The synchronization for this takes place at the SB layer, where
we create a new recorder every time the debugger input is changed.
During replay we use the corresponding buffer as input.
Differential revision: https://reviews.llvm.org/D58564
llvm-svn: 355249
The `ap` suffix is a remnant of lldb's former use of auto pointers,
before they got deprecated. Although all their uses were replaced by
unique pointers, some variables still carried the suffix.
In r353795 I removed another auto_ptr remnant, namely redundant calls to
::get for unique_pointers. Jim justly noted that this is a good
opportunity to clean up the variable names as well.
I went over all the changes to ensure my find-and-replace didn't have
any undesired side-effects. I hope I didn't miss any, but if you end up
at this commit doing a git blame on a weirdly named variable, please
know that the change was unintentional.
llvm-svn: 353912
to reflect the new license.
We understand that people may be surprised that we're moving the header
entirely to discuss the new license. We checked this carefully with the
Foundation's lawyer and we believe this is the correct approach.
Essentially, all code in the project is now made available by the LLVM
project under our new license, so you will see that the license headers
include that license only. Some of our contributors have contributed
code under our old license, and accordingly, we have retained a copy of
our old license notice in the top-level files in each project and
repository.
llvm-svn: 351636
This patch removes the comments grouping header includes. They were
added after running IWYU over the LLDB codebase. However they add little
value, are often outdates and burdensome to maintain.
llvm-svn: 346626
This patch removes the logic for resolving paths out of FileSpec and
updates call sites to rely on the FileSystem class instead.
Differential revision: https://reviews.llvm.org/D53915
llvm-svn: 345890
Summary:
Add settings to control command echoing:
```
(lldb) settings set interpreter.echo-commands true
(lldb) settings set interpreter.echo-comment-commands true
```
Both settings default to true, which keeps LLDB's existing behavior in non-interactive mode (echo all command inputs to the output).
So far the only way to change this behavior was the `--source-quietly` flag, which disables all output including evaluation results.
Now `echo-commands` allows to turn off echoing for commands, while evaluation results are still printed. No effect if `--source-quietly` was present.
`echo-comment-commands` allows to turn off echoing for commands in case they are pure comment lines. No effect if `echo-commands` is false.
Note that the behavior does not change immediately! The new settings take effect only with the next command source.
LLDB lit test are the main motivation for this feature. So far incoming `#CHECK` line have always been echoed to the output and so they could never fail. Now we can disable it in lit-lldb-init.
Todos: Finish test for this feature. Add to lit-lldb-init. Check for failing lit tests.
Reviewers: aprantl, jasonmolenda, JDevlieghere
Subscribers: friss, lldb-commits
Differential Revision: https://reviews.llvm.org/D52788
llvm-svn: 343859
Summary:
We currently allow any completion handler to read and manipulate the list of matches we
calculated so far. This leads to a few problems:
Firstly, a completion handler's logic can now depend on previously calculated results
by another handlers. No completion handler should have such an implicit dependency,
but the current API makes it likely that this could happen (or already happens). Especially
the fact that some completion handler deleted all previously calculated results can mess
things up right now.
Secondly, all completion handlers have knowledge about our internal data structures with
this API. This makes refactoring this internal data structure much harder than it should be.
Especially planned changes like the support of descriptions for completions are currently
giant patches because we have to refactor every single completion handler.
This patch narrows the contract the CompletionRequest has with the different handlers to:
1. A handler can suggest a completion.
2. A handler can ask how many suggestions we already have.
Point 2 obviously means we still have a dependency left between the different handlers, but
getting rid of this is too large to just append it to this patch.
Otherwise this patch just completely hides the internal StringList to the different handlers.
The CompletionRequest API now also ensures that the list of completions is unique and we
don't suggest the same value multiple times to the user. This property has been so far only
been ensured by the `Option` handler, but is now applied globally. This is part of this patch
as the OptionHandler is no longer able to implement this functionality itself.
Reviewers: jingham, davide, labath
Reviewed By: davide
Subscribers: lldb-commits
Differential Revision: https://reviews.llvm.org/D49322
llvm-svn: 338151
Summary:
As suggested in D48796, this patch replaces even more internal calls that were using the old
completion API style with a single CompletionRequest. In some cases we also pass an option
vector/index, but as we don't always have this information, it currently is not part of the
CompletionRequest class.
The constructor of the CompletionRequest is now also more sensible. You only pass the
user input, cursor position and your list of matches to the request and the rest will be
inferred (using the same code we used before to calculate this). You also have to pass these
match window parameters to it, even though they are unused right now.
The patch shouldn't change any behavior.
Reviewers: jingham
Reviewed By: jingham
Subscribers: lldb-commits
Differential Revision: https://reviews.llvm.org/D48976
llvm-svn: 337031
Summary:
This patch gets rid of the C-string parameter in the RawCommandObject::DoExecute function,
making the code simpler and less memory unsafe.
There seems to be a assumption in some command objects that this parameter could be a nullptr,
but from what I can see the rest of the API doesn't actually allow this (and other command
objects and related code pieces dereference this parameter without any checks).
Especially CommandObjectRegexCommand has error handling code for a nullptr that is now gone.
Reviewers: davide, jingham, teemperor
Reviewed By: teemperor
Subscribers: jingham, lldb-commits
Differential Revision: https://reviews.llvm.org/D49207
llvm-svn: 336955
Summary:
A subset of the LLDB commands follows this command line interface style:
<command name> [arguments] -- <string suffix>
The parsing code for this interface has been so far been duplicated into the different
command objects which makes it hard to maintain and reuse elsewhere.
This patches improves the situation by adding a OptionsWithRaw class that centralizes
the parsing logic and allows easier testing. The different commands now just call this class to
extract the arguments and the raw suffix from the provided user input.
Reviewers: jingham
Reviewed By: jingham
Subscribers: mgorny, lldb-commits
Differential Revision: https://reviews.llvm.org/D49106
llvm-svn: 336723
Summary:
This patch refactors the internal completion API. It now takes (as far as possible) a single
CompletionRequest object instead o half a dozen in/out/in-out parameters. The CompletionRequest
contains a common superset of the different parameters as far as it makes sense. This includes
the raw command line string and raw cursor position, which should make the `expr` command
possible to implement (at least without hacks that reconstruct the command line from the args).
This patch is not intended to change the observable behavior of lldb in any way. It's also as
minimal as possible and doesn't attempt to fix all the problems the API has.
Some Q&A:
Q: Why is this not fixing all the problems in the completion API?
A: Because is a blocker for the expr command completion which I want to get in ASAP. This is the
smallest patch that unblocks the expr completion patch and which allows trivial refactoring in the future.
The patch also doesn't really change the internal information flow in the API, so that hopefully
saves us from ever having to revert and resubmit this humongous patch.
Q: Can we merge all the copy-pasted code in the completion methods
(like computing the current incomplete arg) into CompletionRequest class?
A: Yes, but it's out of scope for this patch.
Q: Why the `word_complete = request.GetWordComplete(); ... ` pattern?
A: I don't want to add a getter that returns a reference to the internal integer. So we have
to use a temporary variable and the Getter/Setter instead. We don't throw exceptions
from what I can tell, so the behavior doesn't change.
Q: Why are we not owning the list of matches?
A: Because that's how the previous API works. But that should be fixed too (in another patch).
Q: Can we make the constructor simpler and compute some of the values from the plain command?
A: I think this works, but I rather want to have this in a follow up commit. Especially when making nested
request it's a bit awkward that the parsed arguments behave as both input/output (as we should in theory
propagate the changes on the nested request back to the parent request if we don't want to change the
behavior too much).
Q: Can't we pass one const request object and then just return another result object instead of mixing
them together in one in/out parameter?
A: It's hard to get keep the same behavior with that pattern, but I think we can also get a nice API with just
a single request object. If we make all input parameters read-only, we have a clear separation between what
is actually an input and what an output parameter (and hopefully we get rid of the in-out parameters).
Q: Can we throw out the 'match' variables that are not implemented according to the comment?
A: We currently just forward them as in the old code to the different methods, even though I think
they are really not used. We can easily remove and readd them once every single completion method just
takes a CompletionRequest, but for now I prefer NFC behavior from the perspective of the API user.
Reviewers: davide, jingham, labath
Reviewed By: jingham
Subscribers: mgorny, friss, lldb-commits
Differential Revision: https://reviews.llvm.org/D48796
llvm-svn: 336146
This is intended as a clean up after the big clang-format commit
(r280751), which unfortunately resulted in many of the comment
paragraphs in LLDB being very hard to read.
FYI, the script I used was:
import textwrap
import commands
import os
import sys
import re
tmp = "%s.tmp"%sys.argv[1]
out = open(tmp, "w+")
with open(sys.argv[1], "r") as f:
header = ""
text = ""
comment = re.compile(r'^( *//) ([^ ].*)$')
special = re.compile(r'^((([A-Z]+[: ])|([0-9]+ )).*)|(.*;)$')
for line in f:
match = comment.match(line)
if match and not special.match(match.group(2)):
# skip intentionally short comments.
if not text and len(match.group(2)) < 40:
out.write(line)
continue
if text:
text += " " + match.group(2)
else:
header = match.group(1)
text = match.group(2)
continue
if text:
filled = textwrap.wrap(text, width=(78-len(header)),
break_long_words=False)
for l in filled:
out.write(header+" "+l+'\n')
text = ""
out.write(line)
os.rename(tmp, sys.argv[1])
Differential Revision: https://reviews.llvm.org/D46144
llvm-svn: 331197
Summary:
The Args class is used in plenty of places besides the command
interpreter (e.g., anything requiring an argc+argv combo, such as when
launching a process), so it needs to be in a lower layer. Now that the
class has no external dependencies, it can be moved down to the Utility
module.
This removes the last (direct) dependency from the Host module to
Interpreter, so I remove the Interpreter module from Host's dependency
list.
Reviewers: zturner, jingham, davide
Subscribers: mgorny, lldb-commits
Differential Revision: https://reviews.llvm.org/D45480
llvm-svn: 330200
Summary:
The idea behind this is to move the functionality which depend on other lldb
classes into a separate class. This way, the Args class can be turned
into a lightweight arc+argv wrapper and moved into the lower lldb
layers.
Reviewers: jingham, zturner
Subscribers: lldb-commits
Differential Revision: https://reviews.llvm.org/D44306
llvm-svn: 329677
This renames the LLDB error class to Status, as discussed
on the lldb-dev mailing list.
A change of this magnitude cannot easily be done without
find and replace, but that has potential to catch unwanted
occurrences of common strings such as "Error". Every effort
was made to find all the obvious things such as the word "Error"
appearing in a string, etc, but it's possible there are still
some lingering occurences left around. Hopefully nothing too
serious.
llvm-svn: 302872
The long-term goal here is to get rid of the functions
GetArgumentAtIndex() and GetQuoteCharAtIndex(), instead
replacing them with operator based access and range-based for
enumeration. There are a lot of callsites, though, so the
changes will be done incrementally, starting with this one.
Differential Revision: https://reviews.llvm.org/D26883
llvm-svn: 287597
This is a large API change that removes the two functions from
StreamString that return a std::string& and a const std::string&,
and instead provide one function which returns a StringRef.
Direct access to the underlying buffer violates the concept of
a "stream" which is intended to provide forward only access,
and makes porting to llvm::raw_ostream more difficult in the
future.
Differential Revision: https://reviews.llvm.org/D26698
llvm-svn: 287152
This is better for a number of reasons. Mostly style, but also:
1) Signed-unsigned comparison warnings disappear since there is
no loop index.
2) Iterating with the range-for style gives you back an entry
that has more than just a const char*, so it's more efficient
and more useful.
3) Makes code safter since the type system enforces that it's
impossible to index out of bounds.
llvm-svn: 283413
This change is very mechanical. All it does is change the
signature of `Options::GetDefinitions()` and `OptionGroup::
GetDefinitions()` to return an `ArrayRef<OptionDefinition>`
instead of a `const OptionDefinition *`. In the case of the
former, it deletes the sentinel entry from every table, and
in the case of the latter, it removes the `GetNumDefinitions()`
method from the interface. These are no longer necessary as
`ArrayRef` carries its own length.
In the former case, iteration was done by using a sentinel
entry, so there was no knowledge of length. Because of this
the individual option tables were allowed to be defined below
the corresponding class (after all, only a pointer was needed).
Now, however, the length must be known at compile time to
construct the `ArrayRef`, and as a result it is necessary to
move every option table before its corresponding class. This
results in this CL looking very big, but in terms of substance
there is not much here.
Differential revision: https://reviews.llvm.org/D24834
llvm-svn: 282188
*** to conform to clang-format’s LLVM style. This kind of mass change has
*** two obvious implications:
Firstly, merging this particular commit into a downstream fork may be a huge
effort. Alternatively, it may be worth merging all changes up to this commit,
performing the same reformatting operation locally, and then discarding the
merge for this particular commit. The commands used to accomplish this
reformatting were as follows (with current working directory as the root of
the repository):
find . \( -iname "*.c" -or -iname "*.cpp" -or -iname "*.h" -or -iname "*.mm" \) -exec clang-format -i {} +
find . -iname "*.py" -exec autopep8 --in-place --aggressive --aggressive {} + ;
The version of clang-format used was 3.9.0, and autopep8 was 1.2.4.
Secondly, “blame” style tools will generally point to this commit instead of
a meaningful prior commit. There are alternatives available that will attempt
to look through this change and find the appropriate prior commit. YMMV.
llvm-svn: 280751
easier to scan a set of options with a relatively large number of positional
arguments. This commit standardizes their formatting throughout LLDB and
applies surrounding directives to exempt them from being formatted by
clang-format.
These kinds of exemptions should be rare cases that benefit significantly
from alternative formatting. They also imply a long-term obligation to
maintain their format since the automated tools will not do so.
llvm-svn: 279882
Options used to store a reference to the CommandInterpreter instance
in the base Options class. This made it impossible to parse options
independent of a CommandInterpreter.
This change removes the reference from the base class. Instead, it
modifies the options-parsing-related methods to take an
ExecutionContext pointer, which the options may inspect if they need
to do so.
Closes https://reviews.llvm.org/D23416
Reviewers: clayborg, jingham
llvm-svn: 278440
review it for consistency, accuracy, and clarity. These changes attempt to
address all of the above while keeping the text relatively terse.
<rdar://problem/24868841>
llvm-svn: 275485
- move alias help generation to CommandAlias, out of CommandInterpreter
- make alias creation use argument strings instead of OptionArgVectorSP; the former is a more reasonable currency than the latter
- remove m_is_alias from CommandObject, it wasn't actually being used
llvm-svn: 262912
Right now, obviously, this is just the pair of (CommandObjectSP,OptionArgVectorSP), so NFC
This is step one of a larger - and tricky - refactoring which will turn command aliases into interesting objects instead of passive storage that the command interpreter does smart things to
This refactoring, in turn, will allow us to do interesting things with aliases, such as intelligent and customizable help
llvm-svn: 262900
This is useful in cases such as, e.g.
(lldb) help NSString
(the user meant type lookup)
or
(lldb) help kill
(the user is looking for process kill)
Fixes rdar://24868537
llvm-svn: 262271
Summary:
This removes all uses of virtual on functions
where override could be used, including on destructors.
It also adds override where virtual was previously
missing.
Reviewers: clayborg, labath
Subscribers: lldb-commits
Differential Revision: http://reviews.llvm.org/D13503
llvm-svn: 249564
Existing commands supplying this type of help content have been reworked to take advantage of the changes. In addition to formatting changes, content was changes for accuracy and clarity purposes.
<rdar://problem/21269977>
llvm-svn: 242122
Since interaction with the python interpreter is moving towards
being more isolated, we won't be able to include this header from
normal files anymore, all includes of it should be localized to
the python library which will live under source/bindings/API/Python
after a future patch.
None of the files that were including this header actually depended
on it anyway, so it was just a dead include in every single instance.
llvm-svn: 238581
This works for Python commands defined via a class (implement get_flags on your class) and C++ plugin commands (which can call SBCommand::GetFlags()/SetFlags())
Flags allow features such as not letting the command run if there's no target, or if the process is not stopped, ...
Commands could always check for these things themselves, but having these accessible via flags makes custom commands more consistent with built-in ones
llvm-svn: 238286
This removes ScriptInterpreterObject from the codebase completely.
Places that used to rely on ScriptInterpreterObject now use
StructuredData::Object and its derived classes. To support this,
a new type of StructuredData object is introduced, called
StructuredData::Generic, which stores a void*. Internally within
the python library, StructuredPythonObject subclasses this
StructuredData::Generic class so that it can addref and decref
the python object on construction and destruction.
Additionally, all of the classes in PythonDataObjects.h such
as PythonList, PythonDictionary, etc now provide a method to
create an instance of the corresponding StructuredData type. For
example, there is PythonDictionary::CreateStructuredDictionary.
To eliminate dependencies on PythonDataObjects for external
callers, all ScriptInterpreter methods now return only
StructuredData classes
The rest of the changes in this CL are focused on fixing up
users of PythonDataObjects classes to use the new StructuredData
classes.
llvm-svn: 232534
This works by creating a command backed by a class whose interface should - at least - include
def __init__(self, debugger, session_dict)
def __call__(self, args, return_obj, exe_ctx)
What works:
- adding a command via command script add --class
- calling a thusly created command
What is missing:
- support for custom help
- test cases
The missing parts will follow over the next couple of days
This is an improvement over the existing system as:
a) it provides an obvious location for commands to provide help strings (i.e. methods)
b) it allows commands to store state in an obvious fashion
c) it allows us to easily add features to script commands over time (option parsing and subcommands registration, I am looking at you :-)
llvm-svn: 232136
This new command will delete user defined regular commands, but not aliases. We still have "command unalias" to remove aliases as they are currently in different buckets. Appropriate error messages are displayed to inform the user when "command unalias" is used on removable user defined commands that points users to the "command delete" command.
Added a test to verify we can remove user defined commands and also verify that "command unalias" fails when used on a user defined command.
<rdar://problem/18248300>
llvm-svn: 225535
Fixed the prompt to not include non-printable characters as it was hosing up the prompt when you ran "command regex foo" and entered multi-line editing mode.
Fixed error strings to include more complete descriptions when bad regular expressions are entered.
Removed the old IOHandlerLinesUpdated function as it is no longer needed (inheriting from IOHandlerDelegateMultiline takes care of what this function used to do).
llvm-svn: 222207
Improvements include:
* Use of libedit's wide character support, which is imperfect but a distinct improvement over ASCII-only
* Fallback for ASCII editing path
* Support for a "faint" prompt clearly distinguished from input
* Breaking lines and insert new lines in the middle of a batch by simply pressing return
* Joining lines with forward and backward character deletion
* Detection of paste to suppress automatic formatting and statement completion tests
* Correctly reformatting when lines grow or shrink to occupy different numbers of rows
* Saving multi-line history, and correctly preserving the "tip" of history during editing
* Displaying visible ^C and ^D indications when interrupting input or sending EOF
* Fledgling VI support for multi-line editing
* General correctness and reliability improvements
llvm-svn: 222163
do that (RunCommandInterpreter, HandleCommands, HandleCommandsFromFile) to gather
the options into an options class. Also expose that to the SB API's.
Change the way the "-o" options to the lldb driver are processed so:
1) They are run synchronously - didn't really make any sense to run the asynchronously.
2) The stop on error
3) "quit" in one of the -o commands will not quit lldb - not the command interpreter
that was running the -o commands.
I added an entry to the run options to stop-on-crash, but I haven't implemented that yet.
llvm-svn: 219553
Also, in case they don't define any, change the default from "Run Python function <blah>" into "For more information run help <blah>"
The core issue here is that Python only allows one docstring per function, so we can't really attach both a short and a long help to the same command easily
There are alternatives but this is not a pressing enough concern to go through the motions quite yet
Fixes rdar://18322737
llvm-svn: 217795
This reverses out the options validators changes. We'll get these
back in once the changes to the output can be resolved.
Restores broken tests on FreeBSD, Linux, MacOSX.
Changes reverted: r212500, r212317, r212290.
llvm-svn: 212543
The purpose of the OptionValidator is to determine, based on some
arbitrary set of conditions, whether or not a command option is
valid for a given debugger state. An example of this might be
to selectively disable or enable certain command options that
don't apply to a particular platform.
This patch contains no functional change, and does not actually
make use of an OptionValidator for any purpose yet. A follow-up
patch will begin to add the logic and users of OptionValidator.
Reviewed by: Greg Clayton, Jim Ingham
Differential Revision: http://reviews.llvm.org/D4369
llvm-svn: 212290
Also emit the "Executing commands" message so it properly only comes out when desired and so it comes out in the right place.
<rdar://problem/15992208>
llvm-svn: 200875
- empty lines in init files would repeat previous command and cause errors to be displayed
- all options to control showing the command, its output, if it should stop on error or continue, weren't being obeyed.
llvm-svn: 200860
The many many benefits include:
1 - Input/Output/Error streams are now handled as real streams not a push style input
2 - auto completion in python embedded interpreter
3 - multi-line input for "script" and "expression" commands now allow you to edit previous/next lines using up and down arrow keys and this makes multi-line input actually a viable thing to use
4 - it is now possible to use curses to drive LLDB (please try the "gui" command)
We will need to deal with and fix any buildbot failures and tests and arise now that input/output and error are correctly hooked up in all cases.
llvm-svn: 200263
The semi-unofficial way of returning a status from a Python command was to return a string (e.g. return "no such variable was found") that LLDB would pick as a clue of an error having happened
This checkin changes that:
- SBCommandReturnObject now exports a SetError() call, which can take an SBError or a plain C-string
- script commands now drop any return value and expect the SBCommandReturnObject ("return object") to be filled in appropriately - if you do nothing, a success will be assumed
If your commands were relying on returning a value and having LLDB pick that up as an error, please change your commands to SetError() through the return object or expect changes in behavior
llvm-svn: 184893
This is a rewrite of the command history facility of LLDB
It takes the history management out of the CommandInterpreter into its own CommandHistory class
It reimplements the command history command to allow more combinations of options to work correctly (e.g. com hist -c 1 -s 5)
It adds a new --wipe (-w) option to command history to allow clearing the history on demand
It extends the lldbtest runCmd: and expect: methods to allow adding commands to history if need be
It adds a test case for the reimplemented facility
llvm-svn: 184140
Adding a new setting interpreter.stop-command-source-on-error that dictates a default behavior for whether command source should stop upon hitting an error
You can still override the setting for each individual invocation with the usual -e setting
llvm-svn: 183719
command script import now does reloads - for real
If you invoke command script import foo and it detects that foo has already been imported, it will
- invoke reload(foo) to reload the module in Python
- re-invoke foo.__lldb_init_module
This second step is necessary to ensure that LLDB does not keep cached copies of any formatter, command, ... that the module is providing
Usual caveats with Python imports persist. Among these:
- if you have objects lurking around, reloading the module won't magically update them to reflect changes
- if module A imports module B, reloading A won't reload B
These are Python-specific issues independent of LLDB that would require more extensive design work
The --allow-reload (-r) option is maintained for compatibility with existing scripts, but is clearly documented as redundant - reloading is always enabled whether you use it or not
llvm-svn: 182977
Recursive commands invocations are not currently supported by our CommandInterpreter
CommandScriptImport can actually be made to invoke itself recursively, so we need to work around that by clearing the m_exe_ctx
This is a short-term workaround, a more interesting solution would be to actually make sure recursive command invocations work properly
llvm-svn: 181537
Major fixed to allow reading files that are over 4GB. The main problems were that the DataExtractor was using 32 bit offsets as a data cursor, and since we mmap all of our object files we could run into cases where if we had a very large core file that was over 4GB, we were running into the 4GB boundary.
So I defined a new "lldb::offset_t" which should be used for all file offsets.
After making this change, I enabled warnings for data loss and for enexpected implicit conversions temporarily and found a ton of things that I fixed.
Any functions that take an index internally, should use "size_t" for any indexes and also should return "size_t" for any sizes of collections.
llvm-svn: 173463
- add new header lldb-python.h to be included before other system headers
- short term fix (eventually python dependencies must be cleaned up)
Patch by Matt Kopec!
llvm-svn: 169341
Cleaned up the option parsing code to always pass around the short options as integers. Previously we cast this down to "char" and lost some information. I recently added an assert that would detect duplicate short character options which was firing during the test suite.
This fix does the following:
- make sure all short options are treated as "int"
- make sure that short options can be non-printable values when a short option is not required or when an option group is mixed into many commands and a short option is not desired
- fix the help printing to "do the right thing" in all cases. Previously if there were duplicate short character options, it would just not emit help for the duplicates
- fix option parsing when there are duplicates to parse options correctly. Previously the option parsing, when done for an OptionGroup, would just start parsing options incorrectly by omitting table entries and it would end up setting the wrong option value
llvm-svn: 169189
Jonas Devlieghere