Previously, OffsetInBSS is -1 if it has no information about copy
relocation, 0 if it needs a copy relocation, and >0 if its offset
in BSS has been assigned. These flags were too subtle. This patch
adds a new flag, NeedsCopy, to carry information about whether
a shared symbol needs a copy relocation or not.
llvm-svn: 255865
[ELF] - refactor of code in RelocationSection<ELFT>::writeTo()
Just a little reformat of 'if' conditions, NFC.
Differential revision: http://reviews.llvm.org/D15453
Fix was:
* Renamed unsigned Rel; to unsigned Reloc;
llvm-svn: 255631
as it broke buildbot:
http://lab.llvm.org:8011/builders/lld-x86_64-darwin13/builds/17836/steps/build_Lld/logs/stdio
/Users/buildslave/as-bldslv9/lld-x86_64-darwin13/llvm.src/tools/lld/ELF/OutputSections.cpp:268:14: error: redefinition of 'Rel'
unsigned Rel; ^
/Users/buildslave/as-bldslv9/lld-x86_64-darwin13/llvm.src/tools/lld/ELF/OutputSections.cpp:241:34: note: previous definition is here
for (const DynamicReloc<ELFT> &Rel : Relocs) {
That compiles fine on my MSVS 2015 thought.
llvm-svn: 255628
"Ulrich Drepper, ELF Handling For Thread-Local Storage" (5.5 x86-x64 linker optimizations, http://www.akkadia.org/drepper/tls.pdf) shows how GD can be optimized to IE.
This patch implements the optimization.
Differential revision: http://reviews.llvm.org/D15000
llvm-svn: 254713
Combination of @tlsgd and @gottpoff at the same time leads to miss of R_X86_64_TPOFF64 dynamic relocation. Patch fixes that.
@tlsgd(%rip) - Allocate two contiguous entries in the GOT to hold a tls index
structure (for passing to tls get addr).
@gottpoff(%rip) - Allocate one GOT entry to hold a variable offset in initial TLS
block (relative to TLS block end, %fs:0).
The same situation can be observed for x86 (probably others too, not sure) with corresponding for that target relocations: @tlsgd, @gotntpoff.
Differential revision: http://reviews.llvm.org/D15105
llvm-svn: 254443
Fix was:
uint32_t getLocalTlsIndexVA() { return getVA() + LocalTlsIndexOff; }
=>
uint32_t getLocalTlsIndexVA() { return Base::getVA() + LocalTlsIndexOff; }
Both works for my MSVS.
Original commit message:
[ELF] - Refactor of tls_index implementation for tls local dynamic model.
Patch contains the next 2 changes:
1) static variable Out<ELFT>::LocalModuleTlsIndexOffset moved to Out<ELFT>::Got. At fact there is no meaning for it to be separated from GOT class because at each place of using it anyways needs to call GOT`s getVA(). Also it is impossible to have that offset and not have GOT.
2) addLocalModuleTlsIndex -> addLocalModelTlsIndex (word "Module" changed to "Model"). Not sure was it a mistype or not but I think that update is closer to Urlich terminology.
Differential revision: http://reviews.llvm.org/D15113
llvm-svn: 254433
It failed buildbot:
http://lab.llvm.org:8011/builders/llvm-clang-lld-x86_64-scei-ps4-ubuntu-fast/builds/3782/steps/build/logs/stdio
Target.cpp
In file included from /home/buildbot/Buildbot/Slave/llvm-clang-lld-x86_64-scei-ps4-ubuntu-fast/llvm.src/tools/lld/ELF/Target.cpp:20:
/home/buildbot/Buildbot/Slave/llvm-clang-lld-x86_64-scei-ps4-ubuntu-fast/llvm.src/tools/lld/ELF/OutputSections.h:136:42: error: use of undeclared identifier 'getVA'
uint32_t getLocalTlsIndexVA() { return getVA() + LocalTlsIndexOff; }
llvm-svn: 254432
Patch contains the next 2 changes:
1) static variable Out<ELFT>::LocalModuleTlsIndexOffset moved to Out<ELFT>::Got. At fact there is no meaning for it to be separated from GOT class because at each place of using it anyways needs to call GOT`s getVA(). Also it is impossible to have that offset and not have GOT.
2) addLocalModuleTlsIndex -> addLocalModelTlsIndex (word "Module" changed to "Model"). Not sure was it a mistype or not but I think that update is closer to Urlich terminology.
Differential revision: http://reviews.llvm.org/D15113
llvm-svn: 254428
Splitted writeTo to separate tls relocs handling stuff which is too long for one method now. NFC.
Differential revision: http://reviews.llvm.org/D15012
llvm-svn: 254309
Patch implements lazy relocations for x86.
One of features of x86 is that executable files and shared object files have separate procedure linkage tables. So patch implements both cases.
Detailed information about instructions used can be found in http://docs.oracle.com/cd/E19620-01/805-3050/chapter6-1235/index.html (search: x86: Procedure Linkage Table).
Differential revision: http://reviews.llvm.org/D14955
llvm-svn: 254098
This patch implements next relocations:
R_386_TLS_LE - Negative offset relative to static TLS (GNU version).
R_386_TLS_LE_32 - Offset relative to static TLS block.
These ones are created when using next code sequences:
* @tpoff - The operator must be used to compute an immediate value. The linker will report
an error if the referenced variable is not defined or it is not code for the executable
itself. No GOT entry is created in this case.
* @ntpoff Calculate the negative offset of the variable it is added to relative to the static TLS block.
The operator must be used to compute an immediate value. The linker will report
an error if the referenced variable is not defined or it is not code for the executable
itself. No GOT entry is created in this case.
Information was found in Ulrich Drepper, ELF Handling For Thread-Local Storage, http://www.akkadia.org/drepper/tls.pdf, (6.2, p76)
Differential revision: http://reviews.llvm.org/D14930
llvm-svn: 254090
The content of reserved entries of the .got.plt section is target specific.
In particular, on x86_64 the zero entry holds the address of the .dynamic section,
but on AArch64 the same info is stored in the zero entry of the .got section.
Differential revision: http://reviews.llvm.org/D14703
llvm-svn: 253239
The MIPS target requires specific dynamic section entries to be defined.
* DT_MIPS_RLD_VERSION and DT_MIPS_FLAGS store predefined values.
* DT_MIPS_BASE_ADDRESS holds base VA.
* DT_MIPS_LOCAL_GOTNO holds the number of local GOT entries.
* DT_MIPS_SYMTABNO holds the number of .dynsym entries.
* DT_MIPS_GOTSYM holds the index of the .dynsym entry
which corresponds to the first entry of the global part of GOT.
* DT_MIPS_RLD_MAP holds the address of the reserved space in the data segment.
* DT_MIPS_PLTGOT points to the .got.plt section if it exists.
* DT_PLTGOT holds the address of the GOT section.
See "Dynamic Section" in Chapter 5 in the following document for detailed
description: ftp://www.linux-mips.org/pub/linux/mips/doc/ABI/mipsabi.pdf
Differential revision: http://reviews.llvm.org/D14450
llvm-svn: 252857
The MIPS ABI has requirements to sort the entries in the .dyn.sym section.
Symbols which are not in the GOT have to precede the symbols which are added to
the GOT. The latter must have the same order as the corresponding GOT entries.
Since these sorting requirements contradict those of the GNU hash section,
they cannot be used together.
Differential revision: http://reviews.llvm.org/D14281
llvm-svn: 252854
This adds support for:
* Uniquing CIEs
* Dropping FDEs that point to dropped sections
It drops 657 488 bytes from the .eh_frame of a Release+Asserts clang.
The link time impact is smallish. Linking clang with a Release+Asserts
lld goes from 0.488064805 seconds to 0.504763060 seconds (1.034 X slower).
llvm-svn: 252790
leaq symbol@tlsld(%rip), %rdi
call __tls_get_addr@plt
symbol@tlsld (R_X86_64_TLSLD) instructs the linker to generate a tls_index entry (two GOT slots) in the GOT for the entire module (shared object or executable) with an offset of 0. The symbol for this GOT entry doesn't matter (as long as it's either local to the module or null), and gold doesn't put a symbol in the dynamic R_X86_64_DTPMOD64 relocation for the GOT entry.
All other platforms defined in http://www.akkadia.org/drepper/tls.pdf except for Itanium use a similar model where global and local dynamic GOT entries take up 2 contiguous GOT slots, so we can handle this in a unified manner if we don't care about Itanium.
While scanning relocations we need to identify local dynamic relocations and generate a single tls_index entry in the GOT for the module and store the address of it somewhere so we can later statically resolve the offset for R_X86_64_TLSLD relocations. We also need to generate a R_X86_64_DTPMOD64 relocation in the RelaDyn relocation section.
This implementation is a bit hacky. It side steps the issue of GotSection and RelocationSection only handling SymbolBody entries by relying on a specific relocation type. The alternative to this seemed to be completely rewriting how GotSection and RelocationSection work, or using a different hacky signaling method.
llvm-svn: 252682
This is cleaner than computing relocations as if we had done it.
While at it, keep a single Phdr variable instead of multiple fields of it.
llvm-svn: 252352
This patch implements R_MIPS_GOT16 relocation for global symbols in order to
generate some entries in GOT. Only reserved and global entries are supported
for now. For the detailed description about GOT in MIPS, see "Global Offset
Table" in Chapter 5 in the followin document:
ftp://www.linux-mips.org/pub/linux/mips/doc/ABI/mipsabi.pdf
In addition, the platform specific symbol "_gp" is added, see "Global Data
Symbols" in Chapter 6 in the aforementioned document.
Differential revision: http://reviews.llvm.org/D14211
llvm-svn: 252275
This does not support TPOFF32 relocations to local symbols as the address calculations are separate. Support for this will be a separate patch.
llvm-svn: 251998
It is required to fill up the GNU hash table section before its
finalize() method is called.
Differential Revision: http://reviews.llvm.org/D14196
llvm-svn: 251789
It is the GNU hash table section that should be reaponsible for storing its own
data and applying its requirements for the order to dynamic symbols.
Differential Revision: http://reviews.llvm.org/D14084
llvm-svn: 251502
getFileOff functions defined for other classes return an offset
from beginning of the file. StringTableSection's getFileOff however
returned an offset from beginning of the section. That was confusing.
llvm-svn: 251192
Section garbage collection is a feature to remove unused sections
from outputs. Unused sections are sections that cannot be reachable
from known GC-root symbols or sections. Naturally the feature is
implemented as a mark-sweep garbage collector.
In this patch, I added Live bit to InputSectionBase. If and only
if Live bit is on, the section will be written to the output.
Starting from GC-root symbols or sections, a new function, markLive(),
visits all reachable sections and sets their Live bits. Writer then
ignores sections whose Live bit is off, so that such sections are
excluded from the output.
This change has small negative impact on performance if you use
the feature because making sections means more work. The time to
link Clang changes from 0.356s to 0.386s, or +8%.
It reduces Clang size from 57,764,984 bytes to 55,296,600 bytes.
That is 4.3% reduction.
http://reviews.llvm.org/D13950
llvm-svn: 251043
Rui Ueyama