"->" with a use of ParseUnqualifiedId. Collapse
ActOnMemberReferenceExpr, ActOnDestructorReferenceExpr (both of them),
ActOnOverloadedOperatorReferenceExpr,
ActOnConversionOperatorReferenceExpr, and
ActOnMemberTemplateIdReferenceExpr into a single, new action
ActOnMemberAccessExpr that does the same thing more cleanly (and can
keep more source-location information).
llvm-svn: 85930
yet another copy of the unqualified-id parsing code.
Also, use UnqualifiedId to simplify the Action interface for building
id-expressions. ActOnIdentifierExpr, ActOnCXXOperatorFunctionIdExpr,
ActOnCXXConversionFunctionExpr, and ActOnTemplateIdExpr have all been
removed in favor of the new ActOnIdExpression action.
llvm-svn: 85904
IIDecl cannot be null. There is no need to check for both C++ mode and
presence of CXXRecordDecl. ObjC interfaces can't have ScopeSpecs.
llvm-svn: 85057
type looking using getTypeName() and every property access was using
NextToken() to do lookahead to see if the identifier is followed by
a '.'. Rearrange this code to not need lookahead and only do the
type lookup if we have "identifier." in the token stream. Also
improve a diagnostic a bit.
llvm-svn: 85056
opening parentheses and after each comma. We gather the set of visible
overloaded functions, perform "partial" overloading based on the set
of arguments that we have thus far, and return the still-viable
results sorted by the likelihood that they will be the best candidate.
Most of the changes in this patch are a refactoring of the overloading
routines for a function call, since we needed to separate out the
notion of building an overload set (common to code-completion and
normal semantic analysis) and then what to do with that overload
set. As part of this change, I've pushed explicit template arguments
into a few more subroutines.
There is still much more work to do in this area. Function templates
won't be handled well (unless we happen to deduce all of the template
arguments before we hit the completion point), nor will overloaded
function-call operators or calls to member functions.
llvm-svn: 82549
essence, code completion is triggered by a magic "code completion"
token produced by the lexer [*], which the parser recognizes at
certain points in the grammar. The parser then calls into the Action
object with the appropriate CodeCompletionXXX action.
Sema implements the CodeCompletionXXX callbacks by performing minimal
translation, then forwarding them to a CodeCompletionConsumer
subclass, which uses the results of semantic analysis to provide
code-completion results. At present, only a single, "printing" code
completion consumer is available, for regression testing and
debugging. However, the design is meant to permit other
code-completion consumers.
This initial commit contains two code-completion actions: one for
member access, e.g., "x." or "p->", and one for
nested-name-specifiers, e.g., "std::". More code-completion actions
will follow, along with improved gathering of code-completion results
for the various contexts.
[*] In the current -code-completion-dump testing/debugging mode, the
file is truncated at the completion point and EOF is translated into
"code completion".
llvm-svn: 82166
templates, e.g.,
x.template get<T>
We can now parse these, represent them within an UnresolvedMemberExpr
expression, then instantiate that expression node in simple cases.
This allows us to stumble through parsing LLVM's Casting.h.
llvm-svn: 81300
formed without a trailing '(', diagnose the error (these expressions
must be immediately called), emit a fix-it hint, and fix the code.
llvm-svn: 81015
x->Base::f
We no longer try to "enter" the context of the type that "x" points
to. Instead, we drag that object type through the parser and pass it
into the Sema routines that need to know how to perform lookup within
member access expressions.
We now implement most of the crazy name lookup rules in C++
[basic.lookup.classref] for non-templated code, including performing
lookup both in the context of the type referred to by the member
access and in the scope of the member access itself and then detecting
ambiguities when the two lookups collide (p1 and p4; p3 and p7 are
still TODO). This change also corrects our handling of name lookup
within template arguments of template-ids inside the
nested-name-specifier (p6; we used to look into the scope of the
object expression for them) and fixes PR4703.
I have disabled some tests that involve member access expressions
where the object expression has dependent type, because we don't yet
have the ability to describe dependent nested-name-specifiers starting
with an identifier.
llvm-svn: 80843
Fixes PR4704 problems
Addresses Eli's patch feedback re: ugly cast code
Updates all postfix operators to remove ParenListExprs. While this is awful,
no better solution (say, in the parser) is obvious to me. Better solutions
welcome.
llvm-svn: 78621
--- Reverse-merging r78535 into '.':
D test/Sema/altivec-init.c
U include/clang/Basic/DiagnosticSemaKinds.td
U include/clang/AST/Expr.h
U include/clang/AST/StmtNodes.def
U include/clang/Parse/Parser.h
U include/clang/Parse/Action.h
U tools/clang-cc/clang-cc.cpp
U lib/Frontend/PrintParserCallbacks.cpp
U lib/CodeGen/CGExprScalar.cpp
U lib/Sema/SemaInit.cpp
U lib/Sema/Sema.h
U lib/Sema/SemaExpr.cpp
U lib/Sema/SemaTemplateInstantiateExpr.cpp
U lib/AST/StmtProfile.cpp
U lib/AST/Expr.cpp
U lib/AST/StmtPrinter.cpp
U lib/Parse/ParseExpr.cpp
U lib/Parse/ParseExprCXX.cpp
llvm-svn: 78551
In addition to being defined by the AltiVec PIM, this is also the vector
initializer syntax used by OpenCL, so that vector literals are compatible
with macro arguments.
llvm-svn: 78535
and __has_trivial_constructor builtin pseudo-functions and
additionally implements __has_trivial_copy and __has_trivial_assign,
from John McCall!
llvm-svn: 76916
compilation, and (hopefully) introduce RAII objects for changing the
"potentially evaluated" state at all of the necessary places within
Sema and Parser. Other changes:
- Set the unevaluated/potentially-evaluated context appropriately
during template instantiation.
- We now recognize three different states while parsing or
instantiating expressions: unevaluated, potentially evaluated, and
potentially potentially evaluated (for C++'s typeid).
- When we're in a potentially potentially-evaluated context, queue
up MarkDeclarationReferenced calls in a stack. For C++ typeid
expressions that are potentially evaluated, we will play back
these MarkDeclarationReferenced calls when we exit the
corresponding potentially potentially-evaluated context.
- Non-type template arguments are now parsed as constant
expressions, so they are not potentially-evaluated.
llvm-svn: 73899
C++. This logic is required to trigger implicit instantiation of
function templates and member functions of class templates, which will
be implemented separately.
This commit includes support for -Wunused-parameter, printing warnings
for named parameters that are not used within a function/Objective-C
method/block. Fixes <rdar://problem/6505209>.
llvm-svn: 73797
a paren expression without considering the context past the parentheses.
Behold:
(T())x; - type-id
(T())*x; - type-id
(T())/x; - expression
(T()); - expression
llvm-svn: 72260
redundant functionality. The result (ASTOwningVector) lives in
clang/Parse/Ownership.h and is used by both the parser and semantic
analysis. No intended functionality change.
llvm-svn: 72214
type and argument types are missing, and let return type deduction
happen before we give errors for returning from a noreturn block.
Radar 6441502
llvm-svn: 70413
This gets rid of a bunch of random InvalidDecl bools in sema, changing
us to use the following approach:
1. When analyzing a declspec or declarator, if an error is found, we
set a bit in Declarator saying that it is invalid.
2. Once the Decl is created by sema, we immediately set the isInvalid
bit on it from what is in the declarator. From this point on, sema
consistently looks at and sets the bit on the decl.
This gives a very clear separation of concerns and simplifies a bunch
of code. In addition to this, this patch makes these changes:
1. it renames DeclSpec::getInvalidType() -> isInvalidType().
2. various "merge" functions no longer return bools: they just set the
invalid bit on the dest decl if invalid.
3. The ActOnTypedefDeclarator/ActOnFunctionDeclarator/ActOnVariableDeclarator
methods now set invalid on the decl returned instead of returning an
invalid bit byref.
4. In SemaType, refering to a typedef that was invalid now propagates the
bit into the resultant type. Stuff declared with the invalid typedef
will now be marked invalid.
5. Various methods like CheckVariableDeclaration now return void and set the
invalid bit on the decl they check.
There are a few minor changes to tests with this, but the only major bad
result is test/SemaCXX/constructor-recovery.cpp. I'll take a look at this
next.
llvm-svn: 70020
Douglas Gregor