Summary:
This is a fix to PR37005.
Essentially, rL328539 ([InstCombine] reassociate loop invariant GEP chains to enable LICM) contains a bug
whereby it will convert:
%src = getelementptr inbounds i8, i8* %base, <2 x i64> %val
%res = getelementptr inbounds i8, <2 x i8*> %src, i64 %val2
into:
%src = getelementptr inbounds i8, i8* %base, i64 %val2
%res = getelementptr inbounds i8, <2 x i8*> %src, <2 x i64> %val
By swapping the index operands if the GEPs are in a loop, and %val is loop variant while %val2
is loop invariant.
This fix recreates new GEP instructions if the index operand swap would result in the type
of %src changing from vector to scalar, or vice versa.
Reviewers: sebpop, spatel
Reviewed By: sebpop
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D45287
llvm-svn: 329331
This change brings performance of zlib up by 10%. The example below is from a
hot loop in longest_match() from zlib.
do.body:
%cur_match.addr.0 = phi i32 [ %cur_match, %entry ], [ %2, %do.cond ]
%idx.ext = zext i32 %cur_match.addr.0 to i64
%add.ptr = getelementptr inbounds i8, i8* %win, i64 %idx.ext
%add.ptr2 = getelementptr inbounds i8, i8* %add.ptr, i64 %idx.ext1
%add.ptr3 = getelementptr inbounds i8, i8* %add.ptr2, i64 -1
In this example %idx.ext1 is a loop invariant. It will be moved above the use of
loop induction variable %idx.ext such that it can be hoisted out of the loop by
LICM. The operands that have dependences carried by the loop will be sinked down
in the GEP chain. This patch will produce the following output:
do.body:
%cur_match.addr.0 = phi i32 [ %cur_match, %entry ], [ %2, %do.cond ]
%idx.ext = zext i32 %cur_match.addr.0 to i64
%add.ptr = getelementptr inbounds i8, i8* %win, i64 %idx.ext1
%add.ptr2 = getelementptr inbounds i8, i8* %add.ptr, i64 -1
%add.ptr3 = getelementptr inbounds i8, i8* %add.ptr2, i64 %idx.ext
llvm-svn: 328539
Remove #include of Transforms/Scalar.h from Transform/Utils to fix layering.
Transforms depends on Transforms/Utils, not the other way around. So
remove the header and the "createStripGCRelocatesPass" function
declaration (& definition) that is unused and motivated this dependency.
Move Transforms/Utils/Local.h into Analysis because it's used by
Analysis/MemoryBuiltins.cpp.
llvm-svn: 328165
Also, rename 'foldOpWithConstantIntoOperand' because that's annoyingly
vague. The constant check is redundant in some cases, but it allows
removing duplication for most of the calls.
llvm-svn: 326329
Making a width of GEP Index, which is used for address calculation, to be one of the pointer properties in the Data Layout.
p[address space]:size:memory_size:alignment:pref_alignment:index_size_in_bits.
The index size parameter is optional, if not specified, it is equal to the pointer size.
Till now, the InstCombiner normalized GEPs and extended the Index operand to the pointer width.
It works fine if you can convert pointer to integer for address calculation and all registered targets do this.
But some ISAs have very restricted instruction set for the pointer calculation. During discussions were desided to retrieve information for GEP index from the Data Layout.
http://lists.llvm.org/pipermail/llvm-dev/2018-January/120416.html
I added an interface to the Data Layout and I changed the InstCombiner and some other passes to take the Index width into account.
This change does not affect any in-tree target. I added tests to cover data layouts with explicitly specified index size.
Differential Revision: https://reviews.llvm.org/D42123
llvm-svn: 325102
This, in instcombine, allows conversions to i8/i16/i32 (very
common cases) even if the resulting type is not legal according
to the data layout. This can often open up extra combine
opportunities.
Differential Revision: https://reviews.llvm.org/D42424
llvm-svn: 324174
This, in instcombine, allows conversions to i8/i16/i32 (very
common cases) even if the resulting type is not legal according
to the data layout. This can often open up extra combine
opportunities.
Differential Revision: https://reviews.llvm.org/D42424
llvm-svn: 323951
Summary:
Passing AliasAnalysis results instead of nullptr appears to work just fine.
A couple new-pass-manager tests updated to align with new order of analyses.
Reviewers: chandlerc, spatel, craig.topper
Reviewed By: chandlerc
Subscribers: mehdi_amini, eraman, llvm-commits
Differential Revision: https://reviews.llvm.org/D41203
llvm-svn: 320687
InstCombine salvages debug info for every instruction it erases from its
worklist, but it wasn't doing it during its initial DCE when populating
its worklist. This fixes that.
This should help improve availability of 'this' in optimized debug info
when casts are necessary.
llvm-svn: 318320
These changes faciliate positive behavior for arithmetic based select
expressions that match its translation criteria, keeping code size gated to
neutral or improved scenarios.
Patch by Michael Berg <michael_c_berg@apple.com>!
Differential Revision: https://reviews.llvm.org/D38263
llvm-svn: 314320
The fix is to avoid invalidating our insertion point in
replaceDbgDeclare:
Builder.insertDeclare(NewAddress, DIVar, DIExpr, Loc, InsertBefore);
+ if (DII == InsertBefore)
+ InsertBefore = &*std::next(InsertBefore->getIterator());
DII->eraseFromParent();
I had to write a unit tests for this instead of a lit test because the
use list order matters in order to trigger the bug.
The reduced C test case for this was:
void useit(int*);
static inline void inlineme() {
int x[2];
useit(x);
}
void f() {
inlineme();
inlineme();
}
llvm-svn: 313905
.. as well as the two subsequent changes r313826 and r313875.
This leads to segfaults in combination with ASAN. Will forward repro
instructions to the original author (rnk).
llvm-svn: 313876
Summary:
This implements the design discussed on llvm-dev for better tracking of
variables that live in memory through optimizations:
http://lists.llvm.org/pipermail/llvm-dev/2017-September/117222.html
This is tracked as PR34136
llvm.dbg.addr is intended to be produced and used in almost precisely
the same way as llvm.dbg.declare is today, with the exception that it is
control-dependent. That means that dbg.addr should always have a
position in the instruction stream, and it will allow passes that
optimize memory operations on local variables to insert llvm.dbg.value
calls to reflect deleted stores. See SourceLevelDebugging.rst for more
details.
The main drawback to generating DBG_VALUE machine instrs is that they
usually cause LLVM to emit a location list for DW_AT_location. The next
step will be to teach DwarfDebug.cpp how to recognize more DBG_VALUE
ranges as not needing a location list, and possibly start setting
DW_AT_start_offset for variables whose lifetimes begin mid-scope.
Reviewers: aprantl, dblaikie, probinson
Subscribers: eraman, hiraditya, llvm-commits
Differential Revision: https://reviews.llvm.org/D37768
llvm-svn: 313825
In these cases, two selects have constant selectable operands for
both the true and false components and have the same conditional
expression.
We then create two arithmetic operations of the same type and feed a
final select operation using the result of the true arithmetic for the true
operand and the result of the false arithmetic for the false operand and reuse
the original conditionl expression.
The arithmetic operations are naturally folded as a consequence, leaving
only the newly formed select to replace the old arithmetic operation.
Patch by: Michael Berg <michael_c_berg@apple.com>
Differential Revision: https://reviews.llvm.org/D37019
llvm-svn: 313774
Summary:
This should improve optimized debug info for address-taken variables at
the cost of inaccurate debug info in some situations.
We patched this into clang and deployed this change to Chromium
developers, and this significantly improved debuggability of optimized
code. The long-term solution to PR34136 seems more and more like it's
going to take a while, so I would like to commit this change under a
flag so that it can be used as a stop-gap measure.
This flag should really help so for C++ aggregates like std::string and
std::vector, which are typically address-taken, even after inlining, and
cannot be SROA-ed.
Reviewers: aprantl, dblaikie, probinson, dberlin
Subscribers: hiraditya, llvm-commits
Differential Revision: https://reviews.llvm.org/D36596
llvm-svn: 313108
InstCombine folds instructions with irrelevant conditions to undef.
This, as Nuno confirmed is a bug.
(see https://bugs.llvm.org/show_bug.cgi?id=33409#c1 )
Given the original motivation for the change is that of removing an
USE, we now fold to false instead (which reaches the same goal
without undesired side effects).
Fixes PR33409.
Differential Revision: https://reviews.llvm.org/D36975
llvm-svn: 311540
Sometimes it would be nice to stop InstCombine mid way through its combining to see the current IR. By using a debug counter we can place an upper limit on how many instructions to process.
This will also allow skipping the first X combines, but that has the potential to change later combines since earlier canonicalizations might have been skipped.
Differential Revision: https://reviews.llvm.org/D36553
llvm-svn: 310638
Summary:
This changes SimplifyLibCalls to use the new OptimizationRemarkEmitter
API.
In fact, as SimplifyLibCalls is only ever called via InstCombine,
(as far as I can tell) the OptimizationRemarkEmitter is added there,
and then passed through to SimplifyLibCalls later.
I have avoided changing any remark text.
This closes PR33787
Patch by Sam Elliott!
Reviewers: anemet, davide
Reviewed By: anemet
Subscribers: davide, mehdi_amini, eraman, fhahn, llvm-commits
Differential Revision: https://reviews.llvm.org/D35608
llvm-svn: 309158
Summary:
If one side simplifies to the identity value for inner opcode, we can replace the value with just the operation that can't be simplified.
I've removed a couple now unneeded special cases in visitAnd and visitOr. There are probably other cases I missed.
Reviewers: spatel, majnemer, hfinkel, dberlin
Reviewed By: spatel
Subscribers: grandinj, llvm-commits, spatel
Differential Revision: https://reviews.llvm.org/D35451
llvm-svn: 308111
Previously the InstCombiner class contained a pointer to an IR builder that had been passed to the constructor. Sometimes this would be passed to helper functions as either a pointer or the pointer would be dereferenced to be passed by reference.
This patch makes it a reference everywhere including the InstCombiner class itself so there is more inconsistency. This a large, but mechanical patch. I've done very minimal formatting changes on it despite what clang-format wanted to do.
llvm-svn: 307451
Summary:
As discussed on the mailing list it is legal to propagate TBAA to loads/stores
from/to smaller regions of a larger load tagged with TBAA. Do so for
(load->extractvalue)=>(gep->load) and similar foldings.
Reviewed By: sanjoy
Differential Revision: https://reviews.llvm.org/D31954
llvm-svn: 306615
Summary:
Some optimizations in AddReachableCodeToWorklist did not update
the MadeIRChange state. This could happen both when removing
trivially dead instructions (DCE) and at constant folds.
It is essential that changes to the IR is reported correctly,
since for example InstCombinePass::run() will indicate that all
analyses are preserved otherwise.
And the CGPassManager determines if the CallGraph is up-to-date
based on status from InstructionCombiningPass::runOnFunction().
The new test case early_dce_clobbers_callgraph.ll is a reproducer
for some asserts that started to trigger after changes in the
inliner in r305245. With this patch the test case passes again.
Reviewers: sanjoy, craig.topper, dblaikie
Reviewed By: craig.topper
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D34346
llvm-svn: 305725
Summary:
When we fold vector constants that are operands of phi's that feed into select,
we need to set the correct insertion point for the *new* selects that get generated.
The correct insertion point is the incoming block for the phi.
Such cases can occur with patch r298845, which fixed folding of
vector constants, but the new selects could be inserted incorrectly (as the added
test case shows).
Reviewers: majnemer, spatel, sanjoy
Reviewed by: spatel
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D34162
llvm-svn: 305591
Summary: This matches the behavior we already had for compares and makes us consistent everywhere.
Reviewers: dberlin, hfinkel, spatel
Reviewed By: dberlin
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D33604
llvm-svn: 305049
I did this a long time ago with a janky python script, but now
clang-format has built-in support for this. I fed clang-format every
line with a #include and let it re-sort things according to the precise
LLVM rules for include ordering baked into clang-format these days.
I've reverted a number of files where the results of sorting includes
isn't healthy. Either places where we have legacy code relying on
particular include ordering (where possible, I'll fix these separately)
or where we have particular formatting around #include lines that
I didn't want to disturb in this patch.
This patch is *entirely* mechanical. If you get merge conflicts or
anything, just ignore the changes in this patch and run clang-format
over your #include lines in the files.
Sorry for any noise here, but it is important to keep these things
stable. I was seeing an increasing number of patches with irrelevant
re-ordering of #include lines because clang-format was used. This patch
at least isolates that churn, makes it easy to skip when resolving
conflicts, and gets us to a clean baseline (again).
llvm-svn: 304787
This continues the changes started when computeSignBit was replaced with this new version of computeKnowBits.
Differential Revision: https://reviews.llvm.org/D33431
llvm-svn: 303773
There should be a slight efficiency improvement from handling icmp/fcmp with one matcher and reducing duplicated code.
The larger motivation is that there are questions about how predicate canonicalization is handled, and the refactoring
should make it easier if we want to change any of that behavior.
1. As noted in the code comment, we've chosen 3 of the 16 FCMP preds as not canonical. Why those 3? It goes back to
rL32751 from what I can tell, but I'm not sure if there's a justification for that rule.
2. We currently do not canonicalize integer select conditions. Should we use the same rule that applies to branches
for selects?
3. We currently do canonicalize some FP select conditions, and those rules would conflict with the rule shown here.
Should one or both be changed?
No-functional-change-intended, but adding tests anyway because there's no coverage for most of the predicates.
Differential Revision: https://reviews.llvm.org/D33247
llvm-svn: 303261
Summary:
If the Worklist build causes an IR change this change flag currently factors into the flag for running another iteration of the iteration loop. But only changes during processing should trigger another loop.
This patch captures the worklist creation change flag into the outside the loop flag currently used for DbgDeclares and only sends that flag up to the caller. Rerunning the loop only depends on IC.run() now.
This uses the debug output of InstCombine to determine if one or two iterations run. I couldn't think of a better way to detect it since the second spurious iteration shoudn't make any visible changes. Just wasted computation.
I can do a pre-commit of the test case with the CHECK-NOT as a CHECK if this is an ok way to check this.
This is a subset of D31678 as I'm still not sure how to verify the analysis behavior for that.
Reviewers: davide, majnemer, spatel, chandlerc
Reviewed By: davide
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D32453
llvm-svn: 302982
This patch adds min/max population count, leading/trailing zero/one bit counting methods.
The min methods return answers based on bits that are known without considering unknown bits. The max methods give answers taking into account the largest count that unknown bits could give.
Differential Revision: https://reviews.llvm.org/D32931
llvm-svn: 302925
This patch adds isConstant and getConstant for determining if KnownBits represents a constant value and to retrieve the value. Use them to simplify code.
Differential Revision: https://reviews.llvm.org/D32785
llvm-svn: 302091
This patch introduces a new KnownBits struct that wraps the two APInt used by computeKnownBits. This allows us to treat them as more of a unit.
Initially I've just altered the signatures of computeKnownBits and InstCombine's simplifyDemandedBits to pass a KnownBits reference instead of two separate APInt references. I'll do similar to the SelectionDAG version of computeKnownBits/simplifyDemandedBits as a separate patch.
I've added a constructor that allows initializing both APInts to the same bit width with a starting value of 0. This reduces the repeated pattern of initializing both APInts. Once place default constructed the APInts so I added a default constructor for those cases.
Going forward I would like to add more methods that will work on the pairs. For example trunc, zext, and sext occur on both APInts together in several places. We should probably add a clear method that can be used to clear both pieces. Maybe a method to check for conflicting information. A method to return (Zero|One) so we don't write it out everywhere. Maybe a method for (Zero|One).isAllOnesValue() to determine if all bits are known. I'm sure there are many other methods we can come up with.
Differential Revision: https://reviews.llvm.org/D32376
llvm-svn: 301432
Commits were:
"Use WeakVH instead of WeakTrackingVH in AliasSetTracker's UnkownInsts"
"Add a new WeakVH value handle; NFC"
"Rename WeakVH to WeakTrackingVH; NFC"
The changes assumed pointers are 8 byte aligned on all architectures.
llvm-svn: 301429
Summary:
I plan to use WeakVH to mean "nulls itself out on deletion, but does
not track RAUW" in a subsequent commit.
Reviewers: dblaikie, davide
Reviewed By: davide
Subscribers: arsenm, mehdi_amini, mcrosier, mzolotukhin, jfb, llvm-commits, nhaehnle
Differential Revision: https://reviews.llvm.org/D32266
llvm-svn: 301424
The code I've removed here exists in ExpandBinOp in InstSimplify which we call into before SimplifyUsingDistributiveLaws. The code in InstSimplify looks to have been copied from here.
I verified this code doesn't fire on any lit tests. Not that that proves its definitely dead.
Differential Revision: https://reviews.llvm.org/D32472
llvm-svn: 301341
This is preparation for a clang change to improve the [[nodiscard]] warning to not be ignored on methods that return a class marked [[nodiscard]] that are defined in the class itself. See D32207.
We should consider adding wrapper methods to APInt that return the overflow flag directly and discard the APInt result. This would eliminate the void casts and the need to create a bool before the call to pass to the out param.
llvm-svn: 300758
We currently only support folding a subtract into a select but not a PHI. This fixes that.
I had to fix an assumption in FoldOpIntoPhi that assumed the PHI node was always in operand 0. Now we pass it in like we do for FoldOpIntoSelect. But we still require some dancing to find the Constant when we create the BinOp or ConstantExpr. This is based code is similar to what we do for selects.
Since I touched all call sites, this also renames FoldOpIntoPhi to foldOpIntoPhi to match coding standards.
Differential Revision: https://reviews.llvm.org/D31686
llvm-svn: 300363
Currently this code always makes 2 or 3 calls to tryFactorization regardless of whether the LHS/RHS are BinaryOperators. We make 3 calls when both operands are BinaryOperators with the same opcode. Or surprisingly, when neither are BinaryOperators. This is because getBinOpsForFactorization returns Instruction::BinaryOpsEnd when the operand is not a BinaryOperator. If both LHS and RHS are not BinaryOperators then they both have an Opcode of Instruction::BinaryOpsEnd. When this happens we rely on tryFactorization to early out due to A/B/C/D being null. Similar behavior occurs for the other calls, we rely on getBinOpsForFactorization having made A/B or C/D null to get tryFactorization to early out.
We also rely on these null checks to check the result of getIdentityValue and early out for it.
This patches refactors this to pull these checks up to SimplifyUsingDistributiveLaws so we don't rely on BinaryOpsEnd as a sentinel or this A/B/C/D null behavior. I think this makes this code easier to reason about. Should also give a tiny performance improvement for cases where the LHS or RHS isn't a BinaryOperator.
Differential Revision: https://reviews.llvm.org/D31913
llvm-svn: 300353
and to expose a handle to represent the actual case rather than having
the iterator return a reference to itself.
All of this allows the iterator to be used with common STL facilities,
standard algorithms, etc.
Doing this exposed some missing facilities in the iterator facade that
I've fixed and required some work to the actual iterator to fully
support the necessary API.
Differential Revision: https://reviews.llvm.org/D31548
llvm-svn: 300032
This removes a TODO in getIdentityValue and may allow some transforms to occur earlier. But I was unable to find any transforms we didn't already handle.
llvm-svn: 299966
Summary: I noticed in the select folding code that we copied fast math flags, but did not do the same for the similar handling in phi nodes. This patch fixes that to do the same thing as select
Reviewers: spatel, davide, majnemer, hfinkel
Reviewed By: davide
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D31690
llvm-svn: 299838
This way we ensure we immediately revisit the instruction and do any additional optimizations before visiting the users. Otherwise we might visit the users, then the instruction, then users again, then instruction again.
llvm-svn: 299267
Some of the GEP combines (e.g., descaling) can't handle vector GEPs. We have an
existing check that attempts to bail out if given a vector GEP. However, the
check only tests the GEP's pointer operand. A GEP results in a vector of
pointers if at least one of its operands is vector-typed (e.g., its pointer
operand could be a scalar, but its index could be a vector). We should just
check the type of the GEP itself. This should fix PR32414.
Reference: https://bugs.llvm.org/show_bug.cgi?id=32414
Differential Revision: https://reviews.llvm.org/D31470
llvm-svn: 299017
Summary:
We are incorrectly folding selects into phi nodes when the incoming value of a phi
node is a constant vector. This optimization is done in `FoldOpIntoPhi` when the
select condition is a phi node with constant incoming values.
Without the fix, we are miscompiling (i.e. incorrectly folding the
select into the phi node) when the vector contains non-zero
elements.
This patch fixes the miscompile and we will correctly fold based on the
select vector operand (see added test cases).
Reviewers: majnemer, sanjoy, spatel
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D31189
llvm-svn: 298845
InstCombine tries to constant fold instruction operands during worklist building, but we don't print that we're doing this.
We also set a change flag here that causes us to rebuild and rerun the worklist one more time even if processing the worklist itself created no additional changes. So in the log I saw two inst combine runs that visited all instructions without printing that anything was changed. I may be submitting another patch to remove the change flag unless I can find some reason why we should be doing that.
Differential Revision: https://reviews.llvm.org/D31091
llvm-svn: 298264
This patch is based on the llvm-dev discussion here:
http://lists.llvm.org/pipermail/llvm-dev/2017-January/109631.html
Folding to i1 should always be desirable because that's better for value tracking
and we have special folds for i1 types.
I checked for other users of shouldChangeType() where this might have an effect,
but we already handle the i1 case differently than other types in all of those cases.
Side note: the default datalayout includes i1, so it seems we only find this gap in
shouldChangeType + phi folding for the case when there is (1) an explicit datalayout
without i1, (2) casting to i1 from a legal type, and (3) a phi with exactly 2 incoming
casted operands (as Björn mentioned).
Differential Revision: https://reviews.llvm.org/D29336
llvm-svn: 294066
a function's CFG when that CFG is unchanged.
This allows transformation passes to simply claim they preserve the CFG
and analysis passes to check for the CFG being preserved to remove the
fanout of all analyses being listed in all passes.
I've gone through and removed or cleaned up as many of the comments
reminding us to do this as I could.
Differential Revision: https://reviews.llvm.org/D28627
llvm-svn: 292054
mark it as never invalidated in the new PM.
The old PM already required this to work, and after a discussion with
Hal this seems to really be the only sensible answer. The cache
gracefully degrades as the IR is mutated, and most things which do this
should already be incrementally updating the cache.
This gets rid of a bunch of logic preserving and testing the
invalidation of this analysis.
llvm-svn: 292039
cover domtree and alias analysis. These are the pretty clear analyses
that we would always want to survive this pass.
To make these survive, we also need to preserve the assumption cache.
Added a test that verifies the important bits of this preservation.
llvm-svn: 292037
Some of the callers are artificially limiting this transform to integer types;
this should make it easier to incrementally remove that restriction.
llvm-svn: 291620
We're currently doing nearly the same thing for @llvm.objectsize in
three different places: two of them are missing checks for overflow,
and one of them could subtly break if InstCombine gets much smarter
about removing alloc sites. Seems like a good idea to not do that.
llvm-svn: 290214
After r289755, the AssumptionCache is no longer needed. Variables affected by
assumptions are now found by using the new operand-bundle-based scheme. This
new scheme is more computationally efficient, and also we need much less
code...
llvm-svn: 289756
We could truncate the condition and then try to fold the add into the
original condition value causing wrong case constants to be used.
Move the offset transform ahead of the truncate transform and return
after each transform, so there's no chance of getting confused values.
Fix for:
https://llvm.org/bugs/show_bug.cgi?id=31260
llvm-svn: 289442
Instead, expose whether the current type is an array or a struct, if an array
what the upper bound is, and if a struct the struct type itself. This is
in preparation for a later change which will make PointerType derive from
Type rather than SequentialType.
Differential Revision: https://reviews.llvm.org/D26594
llvm-svn: 288458
As discussed by Andrea on PR30486, we have an unsafe cast to an Instruction type in the select combine which doesn't take into account that it could be a ConstantExpr instead.
Differential Revision: https://reviews.llvm.org/D25466
llvm-svn: 284000
computeKnownBits() already works for integer vectors, so allow vector types when calling that from InstCombine.
I don't think the change to use m_APInt in computeKnownBits is strictly necessary because we do check for
ConstantVector later, but it's more efficient to handle the splat case without needing to loop on vector elements.
This should work with InstSimplify, but doesn't yet, so I made that a FIXME comment on the test for PR24942:
https://llvm.org/bugs/show_bug.cgi?id=24942
Differential Revision: https://reviews.llvm.org/D24677
llvm-svn: 281777
Summary: We can allow sinking if the single user block has only one unique predecessor, regardless of the number of edges. Note that a switch statement with multiple cases can have the same destination.
Reviewers: mcrosier, majnemer, spatel, reames
Subscribers: reames, mcrosier, llvm-commits
Differential Revision: https://reviews.llvm.org/D23722
llvm-svn: 279448
Besides a general consistently benefit, the extra layer of indirection
allows the mechanical part of https://reviews.llvm.org/D23256 that
requires touching every transformation and analysis to be factored out
cleanly.
Thanks to David for the suggestion.
llvm-svn: 278077
Summary:
Turn (select C, (sext A), B) into (sext (select C, A, B')) when A is i1 and
B is a compatible constant, also for zext instead of sext. This will then be
further folded into logical operations.
The transformation would be valid for non-i1 types as well, but other parts of
InstCombine prefer to have sext from non-i1 as an operand of select.
Motivated by the shader compiler frontend in Mesa for AMDGPU, which emits i32
for boolean operations. With this change, the boolean logic is fully
recovered.
Reviewers: majnemer, spatel, tstellarAMD
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D22747
llvm-svn: 277801
Add a generalized IRBuilderCallbackInserter, which is just given a
callback to execute after insertion. This can be used to get rid of
the custom inserter in InstCombine, which will in turn allow me to add
target specific InstCombineCalls API for intrinsics without horrible
layering violations.
llvm-svn: 277784
A ConstantVector can have ConstantExpr operands and vice versa.
However, the folder had no ability to fold ConstantVectors which, in
some cases, was an optimization barrier.
Instead, rephrase the folder in terms of Constants instead of
ConstantExprs and teach callers how to deal with failure.
llvm-svn: 277099
Just because we can constant fold the result of an instruction does not
imply that we can delete the instruction. It may have side effects.
This fixes PR28655.
llvm-svn: 276389
Sanjay Patel