Move the cast<MCSymbolELF> inside emitELFSize, so that:
- it's done in one place instead of at each call
- it's more consistent with similar functions like EmitCOFFSafeSEH
- ambiguity between cast<> and dyn_cast<> is avoided (which also
eliminates an unnecessary dyn_cast call)
This also makes it easier to experiment with using ".size" directives on
non-ELF targets.
llvm-svn: 288437
The coalescer eliminates copies from reserved registers of the form:
%vregX = COPY %rY
in the case where %rY is a reserved register. However this turns out to
be invalid if only some of the subregisters are reserved (see also
https://reviews.llvm.org/D26648).
Differential Revision: https://reviews.llvm.org/D26687
llvm-svn: 288428
Recommitting r288293 with some extra fixes for GlobalISel code.
Most of the exception handling members in MachineModuleInfo is actually
per function data (talks about the "current function") so it is better
to keep it at the function instead of the module.
This is a necessary step to have machine module passes work properly.
Also:
- Rename TidyLandingPads() to tidyLandingPads()
- Use doxygen member groups instead of "//===- EH ---"... so it is clear
where a group ends.
- I had to add an ugly const_cast at two places in the AsmPrinter
because the available MachineFunction pointers are const, but the code
wants to call tidyLandingPads() in between
(markFunctionEnd()/endFunction()).
Differential Revision: https://reviews.llvm.org/D27227
llvm-svn: 288405
The DIEUnit class represents a compile or type unit and it owns the unit DIE as an instance variable. This allows anyone with a DIE, to get the unit DIE, and then get back to its DIEUnit without adding any new ivars to the DIE class. Why was this needed? The DIE class has an Offset that is always the CU relative DIE offset, not the "offset in debug info section" as was commented in the header file (the comment has been corrected). This is great for performance because most DIE references are compile unit relative and this means most code that accessed the DIE's offset didn't need to make it into a compile unit relative offset because it already was. When we needed to emit a DW_FORM_ref_addr though, we needed to find the absolute offset of the DIE by finding the DIE's compile/type unit. This class did have the absolute debug info/type offset and could be added to the CU relative offset to compute the absolute offset. With this change we can easily get back to a DIE's DIEUnit which will have this needed offset. Prior to this is required having a DwarfDebug and required calling:
DwarfCompileUnit *DwarfDebug::lookupUnit(const DIE *CU) const;
Now we can use the DIEUnit class to do so without needing DwarfDebug. All clients now use DIEUnit objects (the DwarfDebug stack and the DwarfLinker). A follow on patch for the DWARF generator will also take advantage of this.
Differential Revision: https://reviews.llvm.org/D27170
llvm-svn: 288399
Most of the exception handling members in MachineModuleInfo is actually
per function data (talks about the "current function") so it is better
to keep it at the function instead of the module.
This is a necessary step to have machine module passes work properly.
Also:
- Rename TidyLandingPads() to tidyLandingPads()
- Use doxygen member groups instead of "//===- EH ---"... so it is clear
where a group ends.
- I had to add an ugly const_cast at two places in the AsmPrinter
because the available MachineFunction pointers are const, but the code
wants to call tidyLandingPads() in between
(markFunctionEnd()/endFunction()).
Differential Revision: https://reviews.llvm.org/D27227
llvm-svn: 288293
VariableDbgInfo is per function data, so it makes sense to have it with
the function instead of the module.
This is a necessary step to have machine module passes work properly.
Differential Revision: https://reviews.llvm.org/D27186
llvm-svn: 288292
This is per function data so it is better kept at the function instead
of the module.
This is a necessary step to have machine module passes work properly.
Differential Revision: https://reviews.llvm.org/D27185
llvm-svn: 288291
The LLDB tests are now ready for this patch.
DWARF specifies that "line 0" really means "no appropriate source
location" in the line table. Use this for branch targets and some
other cases that have no specified source location, to prevent
inheriting unfortunate line numbers from physically preceding
instructions (which might be from completely unrelated source).
Differential Revision: http://reviews.llvm.org/D24180
llvm-svn: 288283
No test case necessary as the problematic condition is checked with the
newly introduced assertAllSuperRegsMarked() function.
Differential Revision: https://reviews.llvm.org/D26648
llvm-svn: 288277
Summary: Further preparation for the expansion of MUL_LOHI added in D24956.
Reviewers: efriedma, RKSimon
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D27064
llvm-svn: 288248
DWARF specifies that "line 0" really means "no appropriate source
location" in the line table. Use this for branch targets and some
other cases that have no specified source location, to prevent
inheriting unfortunate line numbers from physically preceding
instructions (which might be from completely unrelated source).
Differential Revision: http://reviews.llvm.org/D24180
llvm-svn: 288212
Summary:
The code in LiveRangeEdit::eliminateDeadDef() that computes isOrigDef
doesn't handle instructions in which operand 0 is not a def (e.g. KILL)
correctly. Add a check that operand 0 is a def before doing the rest of
the isOrigDef computation.
Reviewers: qcolombet, MatzeB, wmi
Subscribers: mcrosier, llvm-commits
Differential Revision: https://reviews.llvm.org/D27174
llvm-svn: 288189
It looks like this logic was duplicated long ago and the GCC side of
things has grown additional functionality. We need ${:uid} at least to
generate unique MS inline asm labels (PR23715), so expose these.
llvm-svn: 288092
This makes the createGenericSchedLive() function that constructs the
default scheduler available for the public API. This should help when
you want to get a scheduler and the default list of DAG mutations.
This also shrinks the list of default DAG mutations:
{Load|Store}ClusterDAGMutation and MacroFusionDAGMutation are no longer
added by default. Targets can easily add them if they need them. It also
makes it easier for targets to add alternative/custom macrofusion or
clustering mutations while staying with the default
createGenericSchedLive(). It also saves the callback back and forth in
TargetInstrInfo::enableClusterLoads()/enableClusterStores().
Differential Revision: https://reviews.llvm.org/D26986
llvm-svn: 288057
The scavenger was not passed if requiresFrameIndexScavenging was
enabled. I need to be able to test for the availability of an
unallocatable register here, so I can't create a virtual register for
it.
It might be better to just always use the scavenger and stop
creating virtual registers.
llvm-svn: 287843
This patch makes AsmPrinter less reliant on DwarfDebug by relying on the DWARF version in the AsmPrinter's MCStreamer's MCContext. This allows us to remove the redundant DWARF version from DwarfDebug. It also lets us change code that used to access the AsmPrinter's DwarfDebug just to get to the DWARF version by changing the DWARF version accessor on AsmPrinter so that it grabs the version from its MCStreamer's MCContext.
Differential Revision: https://reviews.llvm.org/D27032
llvm-svn: 287839
We did not support subregs in InlineSpiller:foldMemoryOperand() because targets
may not deal with them correctly.
This adds a target hook to let the spiller know that a target can handle
subregs, and actually enables it for x86 for the case of stack slot reloads.
This fixes PR30832.
Differential Revision: https://reviews.llvm.org/D26521
llvm-svn: 287792
Forward store values to matching loads down through token
factors. Factored from D14834.
Reviewers: jyknight, hfinkel
Subscribers: hfinkel, nemanjai, llvm-commits
Differential Revision: https://reviews.llvm.org/D26080
llvm-svn: 287773
We have the following DAGCombiner transformations:
(mul (shl X, c1), c2) -> (mul X, c2 << c1)
(mul (shl X, C), Y) -> (shl (mul X, Y), C)
(shl (mul x, c1), c2) -> (mul x, c1 << c2)
Usually the constant shift is optimised by SelectionDAG::getNode when it is
constructed, by SelectionDAG::FoldConstantArithmetic, but when we're dealing
with vectors and one of those vector constants contains an undef element
FoldConstantArithmetic does not fold and we enter an infinite loop.
Fix this by making FoldConstantArithmetic use getNode to decide how to fold each
vector element, the same as FoldConstantVectorArithmetic does, and rather than
adding the constant shift to the work list instead only apply the transformation
if it's already been folded into a constant, as if it's not we're going to loop
endlessly. Additionally add missing NoOpaques to one of those transformations,
which I noticed when writing the tests for this.
Differential Revision: https://reviews.llvm.org/D26605
llvm-svn: 287766
Implemented widening (v2f32) and splitting (v16f64).
On splitting, I use "popcnt" to calculate memory increment.
More type legalization work will come in the next patches.
llvm-svn: 287761
TargetSubtargetInfo is filled with CodeGen specific interfaces nowadays
(getInstrInfo(), getFrameLowering(), getSelectionDAGInfo()) most of the
tuning flags like enablePostRAScheduler(), getAntiDepBreakMode(),
enableRALocalReassignment(), ... also do not seem to be universal enough
to make sense outside of CodeGen.
Differential Revision: https://reviews.llvm.org/D26948
llvm-svn: 287708
No-one actually had a mangler handy when calling this function, and
getSymbol itself went most of the way towards getting its own mangler
(with a local TLOF variable) so forcing all callers to supply one was
just extra complication.
llvm-svn: 287645
Add basic ComputeNumSignBits support for TRUNCATE ops for cases where the source's number of sign bits overlaps with the truncated size.
Improves X86 SIGN_EXTEND_IN_REG vector cases which were needlessly sign extending boolean vector results.
Differential Revision: https://reviews.llvm.org/D26851
llvm-svn: 287635
A target intrinsic may be defined as possibly reading memory,
but the call site may have additional knowledge that it doesn't read
memory. The intrinsic lowering will expect the pessimistic
assumption of the intrinsic definition, so the chain should
still be used.
llvm-svn: 287593
Summary:
Previously, CGP would unconditionally sink addrspacecast instructions,
even going so far as to sink them into a loop.
Now we check that the cast is "cheap", as defined by TLI.
We introduce a new "is-cheap" function to TLI rather than using
isNopAddrSpaceCast because some GPU platforms want the ability to ask
for non-nop casts to be sunk.
Reviewers: arsenm, tra
Subscribers: jholewinski, wdng, llvm-commits
Differential Revision: https://reviews.llvm.org/D26923
llvm-svn: 287591
The function extendPHIRanges checks the main range of the original live
interval, even when dealing with a subrange. This could also lead to an
assert when the subrange is not live at the extension point, but the
main range is. To avoid this, check the corresponding subrange of the
original live range, instead of always checking the main range.
Review (as a part of a bigger set of changes):
https://reviews.llvm.org/D26359
llvm-svn: 287571
Enable codeview emission for windows-itanium targets. Co-opt an existing
test (which is derived from a C source file and should therefore be
identical across the Itanium and MS ABIs).
Differential Revision: https://reviews.llvm.org/D26693
llvm-svn: 287567
Summary: Merging an empty case block into the header block of switch could cause
ISel to add COPY instructions in the header of switch, instead of the case
block, if the case block is used as an incoming block of a PHI. This could
potentially increase dynamic instructions, especially when the switch is in a
loop. I added a test case which was reduced from the benchmark I was targetting.
Reviewers: t.p.northover, mcrosier, manmanren, wmi, davidxl
Subscribers: qcolombet, danielcdh, hfinkel, mcrosier, llvm-commits
Differential Revision: https://reviews.llvm.org/D22696
llvm-svn: 287553
The previously used "names" are rather descriptions (they use multiple
words and contain spaces), use short programming language identifier
like strings for the "names" which should be used when exporting to
machine parseable formats.
Also removed a unused TimerGroup from Hexxagon.
Differential Revision: https://reviews.llvm.org/D25583
llvm-svn: 287369
ImplicitNullCheck keeps track of one instruction that the memory
operation depends on that it also hoists with the memory operation.
When hoisting this dependency, it would sometimes clobber a live-in
value to the basic block we were hoisting the two things out of. Fix
this by explicitly looking for such dependencies.
I also noticed two redundant checks on `MO.isDef()` in IsMIOperandSafe.
They're redundant since register MachineOperands are either Defs or Uses
-- there is no third kind. I'll change the checks to asserts in a later
commit.
llvm-svn: 287213
This patch updates a bunch of places where add_dependencies was being explicitly called to add dependencies on intrinsics_gen to instead use the DEPENDS named parameter. This cleanup is needed for a patch I'm working on to add a dependency debugging mode to the build system.
llvm-svn: 287206
They're not SelectionDAG- or FunctionLoweringInfo-specific. They
are, however, specific to building MMI from IR.
We could make them members, but it's nice having MMI be a "simple" data
structure and this logic kept separate.
This also lets us reuse them from GlobalISel.
llvm-svn: 287167
We don't track callee clobbered registers correctly, so avoid hoisting
across calls.
Note: for this bug to trigger we need a `readonly` call target, since we
already have logic to not hoist across potentially storing instructions
either.
llvm-svn: 287159
We fail to produce bit-to-bit matching stage2 and stage3 compiler in PGO
bootstrap build. The reason is because LoopBlockSet is of SmallPtrSet type
whose iterating order depends on the pointer value.
This patch fixes this issue by changing to use SmallSetVector.
Differential Revision: http://reviews.llvm.org/D26634
llvm-svn: 287148
In https://reviews.llvm.org/D25347, Geoff noticed that we still have
useless copy that we can eliminate after register allocation. At the
time the allocation is chosen for those copies, they are not useless
but, because of changes in the surrounding code, later on they might
become useless.
The Greedy allocator already has a mechanism to deal with such cases
with a late recoloring. However, we missed to record the some of the
missed hints.
This commit fixes that.
llvm-svn: 287070
Summary:
This fixes the runtime results produces by the fallback multiplication expansion introduced in r270720.
For tests I created a fuzz tester that compares the results with Boost.Multiprecision.
Reviewers: hfinkel
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D26628
llvm-svn: 286998
r286407 has introduced calls to llvm::AddLandingPadInfo, which lives in the
SelectionDAG component. Add it to LLVMBuild to avoid linker failures on Linux.
llvm-svn: 286962
For 64bit ABIs it is common practice to use relative Jump Tables with
potentially different relocation bases. As the logic for the jump table
itself doesn't depend on the relocation base, make it easier for targets
to use the generic logic. Start by dropping the now redundant MIPS logic.
Differential Revision: https://reviews.llvm.org/D26578
llvm-svn: 286951
This adds support for TSan C++ exception handling, where we need to add extra calls to __tsan_func_exit when a function is exitted via exception mechanisms. Otherwise the shadow stack gets corrupted (leaked). This patch moves and enhances the existing implementation of EscapeEnumerator that finds all possible function exit points, and adds extra EH cleanup blocks where needed.
Differential Revision: https://reviews.llvm.org/D26177
llvm-svn: 286893
The DAG mutators in the scheduler cannot really remove DAG nodes as
additional anlysis information such as ScheduleDAGToplogicalSort are
already computed at this point and rely on a fixed number of DAG nodes.
Alleviate the missing removal with a new flag: Setting the new skip
flag on a node ignores it during scheduling.
llvm-svn: 286655
Push VRegUses/collectVRegUses() down the class hierarchy towards its
only user ScheduleDAGMILive.
NFCI: The initialization of the map happens at a later point but that
should not matter.
This is in preparation to allow DAG mutators to merge nodes, which
relies on this map getting computed later.
llvm-svn: 286654
This is a partial revert of r244615 (http://reviews.llvm.org/D11942),
which caused a major regression in debug info quality.
Turning the artificial __MergedGlobal symbols into private symbols
(l__MergedGlobal) means that the linker will not include them in the
symbol table of the final executable. Without a symbol table entry
dsymutil is not be able to process the debug info for any of the
merged globals and thus drops the debug info for all of them.
This patch is enabling the old behavior for all MachO targets while
leaving all other targets unaffected.
rdar://problem/29160481
https://reviews.llvm.org/D26531
llvm-svn: 286607
Summary:
Split ReaderWriter.h which contains the APIs into both the BitReader and
BitWriter libraries into BitcodeReader.h and BitcodeWriter.h.
This is to address Chandler's concern about sharing the same API header
between multiple libraries (BitReader and BitWriter). That concern is
why we create a single bitcode library in our downstream build of clang,
which led to r286297 being reverted as it added a dependency that
created a cycle only when there is a single bitcode library (not two as
in upstream).
Reviewers: mehdi_amini
Subscribers: dlj, mehdi_amini, llvm-commits
Differential Revision: https://reviews.llvm.org/D26502
llvm-svn: 286566
addSchedBarrierDeps() is supposed to add use operands to the ExitSU
node. The current implementation adds uses for calls/barrier instruction
and the MBB live-outs in all other cases. The use
operands of conditional jump instructions were missed.
Also added code to macrofusion to set the latencies between nodes to
zero to avoid problems with the fusing nodes lingering around in the
pending list now.
Differential Revision: https://reviews.llvm.org/D25140
llvm-svn: 286544
There is no need to track dependencies for constant physregs, as they
don't change their value no matter in what order you read/write to them.
Differential Revision: https://reviews.llvm.org/D26221
llvm-svn: 286526
The generic infrastructure to compute the Newton series for reciprocal and
reciprocal square root was conceived to allow a target to compute the series
itself. However, the original code did not properly consider this condition
if returned by a target. This patch addresses the issues to allow a target
to compute the series on its own.
Differential revision: https://reviews.llvm.org/D22975
llvm-svn: 286523
When copying to/from a constant register interferences can be ignored.
Also update the documentation for isConstantPhysReg() to make it more
obvious that this transformation is valid.
Differential Revision: https://reviews.llvm.org/D26106
llvm-svn: 286503
We were failing to extract a constant splat shift value if the shifted value was being masked.
The (shl (and (setcc) N01CV) N1CV) -> (and (setcc) N01CV<<N1CV) combine was unnecessarily preventing this.
llvm-svn: 286454
The name/comment of the third argument to the ScheduleDAGMI constructor
is RemoveKillFlags and not IsPostRA. Only the comments are changed.
Review: A Trick
llvm-svn: 286350
Previously support had been added for using CodeViewRecordIO
to read (deserialize) CodeView type records. This patch adds
support for writing those same records. With this patch,
reading and writing of CodeView type records finally uses a single
codepath.
Differential Revision: https://reviews.llvm.org/D26253
llvm-svn: 286304
if it is more specific than the one in its DW_AT_specification.
If a static member is an array, the translation unit containing the
member definition may have a more specific type (including its length)
than TUs only seeing the class declaration. This patch adds a
DW_AT_type to the member's DW_TAG_variable in addition to the
DW_AT_specification in these cases. The member type in the
DW_AT_specification still shows the more generic type (without the
length) to avoid defeating type uniquing.
The DWARF standard discourages “duplicating” a DW_AT_type in a member
variable definition but doesn’t explicitly forbid it. Having the more
specific type (with the array length) available is what allows the
debugger to print the contents of a static array member variable.
https://reviews.llvm.org/D26368
rdar://problem/28706946
llvm-svn: 286302
Summary:
There are two variables here that break. This change constrains both of them to
debug builds (via DEBUG() or #ifndef NDEBUG).
Reviewers: bkramer, t.p.northover
Subscribers: mehdi_amini, vkalintiris
Differential Revision: https://reviews.llvm.org/D26421
llvm-svn: 286300
After instruction selection we perform some checks on each VReg just before
discarding the type information. These checks were assertions before, but that
breaks the fallback path so this patch moves the logic into the main flow and
reports a better error on failure.
llvm-svn: 286289
Erasing reverse_iterators is problematic; iterate manually.
While there, keep track of the range of inserted instructions.
It can miss instructions inserted elsewhere, but those are harder
to track.
Differential Revision: http://reviews.llvm.org/D22924
llvm-svn: 286272
About when we should move a vreg from CurrentNewVRegs to NewVRegs,
if the vreg in CurrentNewVRegs was added into RecoloringCandidate and was
evicted, it shouldn't be added to NewVRegs because its physical register
will be restored at the end of tryLastChanceRecoloring after the recoloring
failed. If the vreg in CurrentNewVRegs was not in RecoloringCandidate, i.e.
it was evicted in selectOrSplitImpl inside tryRecoloringCandidates, its
physical register will not be restored even if the recoloring failed. In
that case, we need to add the vreg to NewVRegs.
Same as r281783, the problem was seen on out-of-tree target and we didn't
have a test case that reproduce the problem with in-tree targets.
llvm-svn: 286259
Fixed an issue with vector usage of TargetLowering::isConstTrueVal / TargetLowering::isConstFalseVal boolean result matching.
The comment said we shouldn't handle constant splat vectors with undef elements. But the the actual code was returning false if the build vector contained no undef elements....
This patch now ignores the number of undefs (getConstantSplatNode will return null if the build vector is all undefs).
The change has also unearthed a couple of missed opportunities in AVX512 comparison code that will need to be addressed.
Differential Revision: https://reviews.llvm.org/D26031
llvm-svn: 286238
This patch avoids scalarization of CTLZ by instead expanding to use CTPOP (ref: "Hacker's Delight") when the necessary operations are available.
This also adds the necessary cost models for X86 SSE2 targets (the main beneficiary) to ensure vectorization only happens when its useful.
Differential Revision: https://reviews.llvm.org/D25910
llvm-svn: 286233
of which that is hidden inside a separate function call) and helpfully
before building expensive transaction infrastructure. This will avoid
crashing when running CGP in a generic mode if we ever managed to hit
this case.
Note that I spent some time looking at alternatives. CGP is actually
used without a TM or TLI in order to do some target-independent testing.
Further, all of the neighboring optimization techniques actually have
some paths that are effective even in the absence of TLI so this seemed
the correct scope at which to check and bypass logic. It still isn't
clear that long-term support for missing TM/TLI is the right
cost/benefit tradeoff for CGP -- we seem to get relatively little for it
and the code is just littered with checks (and assumptions which
I suspect are still missing some checks).
This at least fixes the potential bug in this code spotted by
PVS-Studio, so we've got that going for us. ;]
llvm-svn: 285987
Summary:
Have MergeConsecutiveStores explicitly return information about the stores
that were merged, so that we can safely determine whether the starting
node has been freed.
Reviewers: chandlerc, bogner, niravd
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D25601
llvm-svn: 285916
2 new intrinsics covering AVX-512 compress/expand functionality.
This implementation includes syntax, DAG builder, operation lowering and tests.
Does not include: handling of illegal data types, codegen prepare pass and the cost model.
llvm-svn: 285876
Using a pattern similar to that of YamlIO, this allows
us to have a single codepath for translating codeview
records to and from serialized byte streams. The
current patch only hooks this up to the reading of
CodeView type records. A subsequent patch will hook
it up for writing of CodeView type records, and then a
third patch will hook up the reading and writing of
CodeView symbols.
Differential Revision: https://reviews.llvm.org/D26040
llvm-svn: 285836
Summary:
Currently PreferredLoopExit is set only in buildLoopChains, which is
never called if there are no MachineLoops.
MSan is currently broken by this:
http://lab.llvm.org:8011/builders/sanitizer-x86_64-linux-fast/builds/145/steps/check-llvm%20msan/logs/stdio
This is a naive fix to get things green again. iteratee: you may have a better fix.
This change will also mean PreferredLoopExit will not carry over if
buildCFGChains() is called a second time in runOnMachineFunction, this
appears to be the right thing.
Reviewers: bkramer, iteratee, echristo
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D26069
llvm-svn: 285757
It's likely if a conditional branch needs to be expanded, the following
unconditional branch will also need expansion. By expanding the
unconditional branch first, the conditional branch can be simply
inverted to jump over the inserted indirect branch block. If the
conditional branch is expanded first, it results in an additional
branch.
This avoids test regressions in future commits.
llvm-svn: 285722
This bug was exposed by using nsw/nuw for more aggressive folds in:
https://reviews.llvm.org/rL284844
The changes mimic the IR demanded bits logic in InstCombiner::SimplifyDemandedUseBits(),
but we can't just flip flag bits in the DAG; we have to create a new node that has the
bits cleared.
This should fix:
https://llvm.org/bugs/show_bug.cgi?id=30841
llvm-svn: 285656
DW_TAG_atomic_type was already included in Dwarf.defs and emitted correctly,
however Verifier didn't recognize it as valid.
Thus we introduce the following changes:
* Make DW_TAG_atomic_type valid tag for IR and DWARF (enabled only with -gdwarf-5)
* Add it to related docs
* Add DebugInfo tests
Differential Revision: https://reviews.llvm.org/D26144
llvm-svn: 285624
Currently computeKnownBits returns the common known zero/one bits for all elements of vector data, when we may only be interested in one/some of the elements.
This patch adds a DemandedElts argument that allows us to specify the elements we actually care about. The original computeKnownBits implementation calls with a DemandedElts demanding all elements to match current behaviour. Scalar types set this to 1.
The approach was found to be easier than trying to add a per-element known bits solution, for a similar usefulness given the combines where computeKnownBits is typically used.
I've only added support for a few opcodes so far (the ones that have proven straightforward to test), all others will default to demanding all elements but can be updated in due course.
DemandedElts support could similarly be added to computeKnownBitsForTargetNode in a future commit.
This looked like this had caused compile time regressions on some buildbots (and was reverted in rL285381), but appears to have just been a harmless bystander!
Differential Revision: https://reviews.llvm.org/D25691
llvm-svn: 285494
Instead of asserting that the shift count is != 0 we just bail out
as it's not profitable trying to optimize a node which will be
removed anyway.
Differential Revision: https://reviews.llvm.org/D26098
llvm-svn: 285480
When LivePhysRegs adds live-in registers, it recognizes ~0 as a special
lane mask indicating the entire register. If the lane mask is not ~0,
it will only add the subregisters that overlap the specified lane mask.
The problem is that if a live-in register does not have subregisters,
and the lane mask is not ~0, it will not be added to the live set.
(The given lane mask may simply be the lane mask of its register class.)
If a register does not have subregisters, add it to the live set if
the lane mask is non-zero.
Differential Revision: https://reviews.llvm.org/D26094
llvm-svn: 285440
TargetPassConfig::addMachinePasses() does some housekeeping first:
Handling the -print-machineinstrs flag and doing an initial printing
"After Instruction Selection". There is no reason for RegUsageInfoProp
to run before those two steps.
llvm-svn: 285422
There is a use after free bug in the existing code. Loop layout selects
a preferred exit block, and then lays out the loop. If this block is
removed during layout, it needs to be invalidated to prevent a use after
free.
llvm-svn: 285348
Summary:
Found when running Valgrind.
This removes two unnecessary assignments when using
AttrBuilder::removeAttribute.
AttrBuilder::removeAttribute returns a reference to the object.
As the LHSes were the same as the callees, the assignments
resulted in memcpy calls where dst = src.
Commited on behalf-of: dstenb (David Stenberg)
Reviewers: mkuper, rnk
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D25460
llvm-svn: 285298
Currently computeKnownBits returns the common known zero/one bits for all elements of vector data, when we may only be interested in one/some of the elements.
This patch adds a DemandedElts argument that allows us to specify the elements we actually care about. The original computeKnownBits implementation calls with a DemandedElts demanding all elements to match current behaviour. Scalar types set this to 1.
The approach was found to be easier than trying to add a per-element known bits solution, for a similar usefulness given the combines where computeKnownBits is typically used.
I've only added support for a few opcodes so far (the ones that have proven straightforward to test), all others will default to demanding all elements but can be updated in due course.
DemandedElts support could similarly be added to computeKnownBitsForTargetNode in a future commit.
Differential Revision: https://reviews.llvm.org/D25691
llvm-svn: 285296
Change type of some missed DebugInfo-related alignment variables,
that are still uint64_t, to uint32_t.
Original change introduced in r284482.
llvm-svn: 285242
This patch ensures that if a floating point vector operand is legalized by
expanding, it is legalized through the stack rather than by calling
DAGTypeLegalizer::IntegerToVector which will cause a failure since the operand
is a non-integer type.
This fixes PR 30715.
llvm-svn: 285231
This reapplies revision 285093. Original commit message:
The branch folding pass tail merges blocks into a common-tail. However, the
tail retains the debug information from one of the original inputs to the
merge (chosen randomly). This is a problem for sampled-based PGO, as hits
on the common-tail will be attributed to whichever block was chosen,
irrespective of which path was actually taken to the common-tail.
This patch fixes the issue by nulling the debug location for the common-tail.
Differential Revision: https://reviews.llvm.org/D25742
llvm-svn: 285212
This finds all of the references to a frame index in a function, and
sorts by the offset. If multiple instructions use the same offset,
nothing was breaking the tie for sorting.
This avoids the test failures the reverted r282999 introduced.
llvm-svn: 285201
Summary:
AMDGPU will need this one i16 is added as a legal type. This is tested by:
test/CodeGen/AMDGPU/sdiv.ll
test/CodeGen/AMDGPU/sdivrem24.ll
test/CodeGen/AMDGPU/udiv.ll
test/CodeGen/AMDGPU/udivrem24.ll
Reviewers: bogner, efriedma
Subscribers: efriedma, wdng, llvm-commits
Differential Revision: https://reviews.llvm.org/D25699
llvm-svn: 285199
* Assume that clang passes non-zero alignment value to DIBuilder
only in case when it was forced by C++11 'alignas', C11 '_Alignas'
or compiler attribute '__attribute__((aligned (N)))'.
* Emit DW_AT_alignment if alignment is specified for type/object.
Differential Revision: https://reviews.llvm.org/D24425
llvm-svn: 285189
* Assume that clang passes non-zero alignment value to DIBuilder
only in case when it was forced by C++11 'alignas', C11 '_Alignas'
or compiler attribute '__attribute__((aligned (N)))'.
* Emit DW_AT_alignment if alignment is specified for type/object.
Differential Revision: https://reviews.llvm.org/D24425
llvm-svn: 285181
Summary:
Fixes PR28281.
MSVC lists indirect virtual base classes in the field list of a class,
using LF_IVBCLASS records. This change makes LLVM emit such records
when processing DW_TAG_inheritance tags with the DIFlagVirtual and
(newly introduced) DIFlagIndirect tags.
Reviewers: rnk, ruiu, zturner
Differential Revision: https://reviews.llvm.org/D25578
llvm-svn: 285130
This reverts r285093, as it caused unexpected buildbot failures on
clang-ppc64le-linux, clang-ppc64be-linux, clang-ppc64be-linux-multistage
and clang-ppc64be-linux-lnt. Failing test ubsan/TestCases/TypeCheck/vptr.cpp.
llvm-svn: 285110
Add an option to allow easier experimentation by target maintainers with the
minimum number of entries to create jump tables. Also clarify the name of
the other existing option governing the creation of jump tables.
Differential revision: https://reviews.llvm.org/D25883
llvm-svn: 285104
When there's a tie between partitionings of jump tables, consider also cases
that result in no jump tables, but in one or a few cases. The motivation is
that many contemporary processors typically perform case switches fairly
quickly.
Differential revision: https://reviews.llvm.org/D25212
llvm-svn: 285099
The branch folding pass tail merges blocks into a common-tail. However, the
tail retains the debug information from one of the original inputs to the
merge (chosen randomly). This is a problem for sampled-based PGO, as hits
on the common-tail will be attributed to whichever block was chosen,
irrespective of which path was actually taken to the common-tail.
This patch fixes the issue by nulling the debug location for the common-tail.
Differential Revision: https://reviews.llvm.org/D25742
llvm-svn: 285093
Summary:
Do *not* perform combines such as:
vector_shuffle<4,1,2,3>(build_vector(Ud, C0, C1 C2), scalar_to_vector(X))
->
build_vector(X, C0, C1, C2)
Keeping the shuffle allows lowering the constant build_vector to a materialized
constant vector (such as a vector-load from the constant-pool or some other idiom).
Reviewers: delena, igorb, spatel, mkuper, andreadb, RKSimon
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D25524
llvm-svn: 285063
This is a function to go backwards in a block to find the first
instruction in a bundle, so iterator is a more natural choice for
parameter/return rather than a reference to a MachineInstruction.
llvm-svn: 285051
Passing a MachineFunction as argument is more natural and avoids an
unnecessary round-trip through the logic determining the correct
Subtarget because MachineFunction already has a reference anyway.
llvm-svn: 285039
(Const)?MIOperands is equivalent to the C++ style
MachineInstr::mop_iterator. Use the latter for consistency except for a
few callers of MIOperands::analyzePhysReg().
llvm-svn: 285029
These functions are about classifying a global which will actually be
emitted, so it does not make sense for them to take a GlobalValue which may
for example be an alias.
Change the Mach-O object writer and the Hexagon, Lanai and MIPS backends to
look through aliases before using TargetLoweringObjectFile interfaces. These
are functional changes but all appear to be bug fixes.
Differential Revision: https://reviews.llvm.org/D25917
llvm-svn: 285006
Summary: With MSVC 2013 and GCC < 4.8 gone, we can use the "constexpr" keyword.
Reviewers: bkramer, mehdi_amini
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D25901
llvm-svn: 284947
0 - X --> 0, if the sub is NUW
0 - X --> 0, if X is 0 or the minimum signed value and the sub is NSW
0 - X --> X, if X is 0 or the minimum signed value
This is the DAG equivalent of:
https://reviews.llvm.org/rL284649
plus the fold for the NUW case which already existed in InstSimplify.
Note that we miss a vector fold because of a deficiency in the DAG version of
computeKnownBits().
llvm-svn: 284844
Because we're just 'or-ing' these 2 variables later in the code, I
don't think there's a logical bug here, but of course the string with
"no size" is the one that should have the size suffix stripped off.
llvm-svn: 284826
As discussed in D24815, let's start the process of killing off the broken fast-math global
state housed in TargetOptions and eliminate the need for function-level fast-math attributes.
Here we enable two similar folds that are possible when we don't care about signed-zero:
fadd nsz x, 0 --> x
fsub nsz 0, x --> -x
Note that although the test cases include a 'sin' function call, I'm side-stepping the
FMF-on-calls question (and lack of support in the DAG) for now. It's not needed for these
tests - isNegatibleForFree/GetNegatedExpression just look through a ISD::FSIN node.
Also, when we create an FNEG node and propagate the Flags of the FSUB to it, this doesn't
actually do anything today because Flags are silently dropped for any node that is not a
binary operator.
Differential Revision: https://reviews.llvm.org/D25297
llvm-svn: 284824
Summary:
The original heuristic to break critical edge during machine sink is relatively conservertive: when there is only one instruction sinkable to the critical edge, it is likely that the machine sink pass will not break the critical edge. This leads to many speculative instructions executed at runtime. However, with profile info, we could model the splitting benefits: if the critical edge has 50% taken rate, it would always be beneficial to split the critical edge to avoid the speculated runtime instructions. This patch uses profile to guide critical edge splitting in machine sink pass.
The performance impact on speccpu2006 on Intel sandybridge machines:
spec/2006/fp/C++/444.namd 25.3 +0.26%
spec/2006/fp/C++/447.dealII 45.96 -0.10%
spec/2006/fp/C++/450.soplex 41.97 +1.49%
spec/2006/fp/C++/453.povray 36.83 -0.96%
spec/2006/fp/C/433.milc 23.81 +0.32%
spec/2006/fp/C/470.lbm 41.17 +0.34%
spec/2006/fp/C/482.sphinx3 48.13 +0.69%
spec/2006/int/C++/471.omnetpp 22.45 +3.25%
spec/2006/int/C++/473.astar 21.35 -2.06%
spec/2006/int/C++/483.xalancbmk 36.02 -2.39%
spec/2006/int/C/400.perlbench 33.7 -0.17%
spec/2006/int/C/401.bzip2 22.9 +0.52%
spec/2006/int/C/403.gcc 32.42 -0.54%
spec/2006/int/C/429.mcf 39.59 +0.19%
spec/2006/int/C/445.gobmk 26.98 -0.00%
spec/2006/int/C/456.hmmer 24.52 -0.18%
spec/2006/int/C/458.sjeng 28.26 +0.02%
spec/2006/int/C/462.libquantum 55.44 +3.74%
spec/2006/int/C/464.h264ref 46.67 -0.39%
geometric mean +0.20%
Manually checked 473 and 471 to verify the diff is in the noise range.
Reviewers: rengolin, davidxl
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D24818
llvm-svn: 284757
Summary:
While promoting *_EXTEND_VECTOR_INREG nodes whose inputs are already
promoted, perform the appropriate sign extension for the promoted node
before doing the *_EXTEND_VECTOR_INREG operation. If not, the undefined
high-order bits of the promoted operand may (a) be garbage inc ase of
zext) or (b) contribute the wrong sign-bit (in case of sext)
Updated the promote-vec3.ll test after this change. The diff shows
explicit zeroing in case of zext and intermediate sign extension in case
of sext.
Reviewers: RKSimon
Subscribers: llvm-commits, srhines
Differential Revision: https://reviews.llvm.org/D25790
llvm-svn: 284752
This is a retry of r284495 which was reverted at r284513 due to use-after-scope bugs
caused by faulty usage of StringRef.
This version also renames a pair of functions:
getRecipEstimateDivEnabled()
getRecipEstimateSqrtEnabled()
as suggested by Eric Christopher.
original commit msg:
[Target] remove TargetRecip class; move reciprocal estimate isel functionality to TargetLowering
This is a follow-up to https://reviews.llvm.org/D24816 - where we changed reciprocal estimates to be function attributes
rather than TargetOptions.
This patch is intended to be a structural, but not functional change. By moving all of the
TargetRecip functionality into TargetLowering, we can remove all of the reciprocal estimate
state, shield the callers from the string format implementation, and simplify/localize the
logic needed for a target to enable this.
If a function has a "reciprocal-estimates" attribute, those settings may override the target's
default reciprocal preferences for whatever operation and data type we're trying to optimize.
If there's no attribute string or specific setting for the op/type pair, just use the target
default settings.
As noted earlier, a better solution would be to move the reciprocal estimate settings to IR
instructions and SDNodes rather than function attributes, but that's a multi-step job that
requires infrastructure improvements. I intend to work on that, but it's not clear how long
it will take to get all the pieces in place.
Differential Revision: https://reviews.llvm.org/D25440
llvm-svn: 284746
- Add alignment attribute to DIVariable family
- Modify bitcode format to match new DIVariable representation
- Update tests to match these changes (also add bitcode upgrade test)
- Expect that frontend passes non-zero align value only when it is not default
(was forcibly aligned by alignas()/_Alignas()/__atribute__(aligned())
Differential Revision: https://reviews.llvm.org/D25073
llvm-svn: 284678
This code crashed on funclet-style EH instructions such as catchpad,
catchswitch, and cleanuppad. Just treat all EH pad instructions
equivalently and avoid merging the globals they reference through any
use.
llvm-svn: 284633
Use mask and negate for legalization of i1 source type with SIGN_EXTEND_INREG.
With the mask, this should be no worse than 2 shifts. The mask can be eliminated
in some cases, so that should be better than 2 shifts.
This change exposed some missing folds related to negation:
https://reviews.llvm.org/rL284239https://reviews.llvm.org/rL284395
There may be others, so please let me know if you see any regressions.
Differential Revision: https://reviews.llvm.org/D25485
llvm-svn: 284611
This will get the same ConstantSDNode scalar or vector splat value as the current separate dyn_cast<ConstantSDNode> / isVector() approach.
llvm-svn: 284578
Summary:
The original heuristic to break critical edge during machine sink is relatively conservertive: when there is only one instruction sinkable to the critical edge, it is likely that the machine sink pass will not break the critical edge. This leads to many speculative instructions executed at runtime. However, with profile info, we could model the splitting benefits: if the critical edge has 50% taken rate, it would always be beneficial to split the critical edge to avoid the speculated runtime instructions. This patch uses profile to guide critical edge splitting in machine sink pass.
The performance impact on speccpu2006 on Intel sandybridge machines:
spec/2006/fp/C++/444.namd 25.3 +0.26%
spec/2006/fp/C++/447.dealII 45.96 -0.10%
spec/2006/fp/C++/450.soplex 41.97 +1.49%
spec/2006/fp/C++/453.povray 36.83 -0.96%
spec/2006/fp/C/433.milc 23.81 +0.32%
spec/2006/fp/C/470.lbm 41.17 +0.34%
spec/2006/fp/C/482.sphinx3 48.13 +0.69%
spec/2006/int/C++/471.omnetpp 22.45 +3.25%
spec/2006/int/C++/473.astar 21.35 -2.06%
spec/2006/int/C++/483.xalancbmk 36.02 -2.39%
spec/2006/int/C/400.perlbench 33.7 -0.17%
spec/2006/int/C/401.bzip2 22.9 +0.52%
spec/2006/int/C/403.gcc 32.42 -0.54%
spec/2006/int/C/429.mcf 39.59 +0.19%
spec/2006/int/C/445.gobmk 26.98 -0.00%
spec/2006/int/C/456.hmmer 24.52 -0.18%
spec/2006/int/C/458.sjeng 28.26 +0.02%
spec/2006/int/C/462.libquantum 55.44 +3.74%
spec/2006/int/C/464.h264ref 46.67 -0.39%
geometric mean +0.20%
Manually checked 473 and 471 to verify the diff is in the noise range.
Reviewers: rengolin, davidxl
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D24818
llvm-svn: 284545
Summary:
The original heuristic to break critical edge during machine sink is relatively conservertive: when there is only one instruction sinkable to the critical edge, it is likely that the machine sink pass will not break the critical edge. This leads to many speculative instructions executed at runtime. However, with profile info, we could model the splitting benefits: if the critical edge has 50% taken rate, it would always be beneficial to split the critical edge to avoid the speculated runtime instructions. This patch uses profile to guide critical edge splitting in machine sink pass.
The performance impact on speccpu2006 on Intel sandybridge machines:
spec/2006/fp/C++/444.namd 25.3 +0.26%
spec/2006/fp/C++/447.dealII 45.96 -0.10%
spec/2006/fp/C++/450.soplex 41.97 +1.49%
spec/2006/fp/C++/453.povray 36.83 -0.96%
spec/2006/fp/C/433.milc 23.81 +0.32%
spec/2006/fp/C/470.lbm 41.17 +0.34%
spec/2006/fp/C/482.sphinx3 48.13 +0.69%
spec/2006/int/C++/471.omnetpp 22.45 +3.25%
spec/2006/int/C++/473.astar 21.35 -2.06%
spec/2006/int/C++/483.xalancbmk 36.02 -2.39%
spec/2006/int/C/400.perlbench 33.7 -0.17%
spec/2006/int/C/401.bzip2 22.9 +0.52%
spec/2006/int/C/403.gcc 32.42 -0.54%
spec/2006/int/C/429.mcf 39.59 +0.19%
spec/2006/int/C/445.gobmk 26.98 -0.00%
spec/2006/int/C/456.hmmer 24.52 -0.18%
spec/2006/int/C/458.sjeng 28.26 +0.02%
spec/2006/int/C/462.libquantum 55.44 +3.74%
spec/2006/int/C/464.h264ref 46.67 -0.39%
geometric mean +0.20%
Manually checked 473 and 471 to verify the diff is in the noise range.
Reviewers: rengolin, davidxl
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D24818
llvm-svn: 284541
Summary:
The original implementation is in r261607, which was reverted in r269726 to accomendate the ProfileSummaryInfo analysis pass. The new implementation:
1. add a new metadata for function section prefix
2. query against ProfileSummaryInfo in CGP to set the correct section prefix for each function
3. output the section prefix set by CGP
Reviewers: davidxl, eraman
Subscribers: vsk, llvm-commits
Differential Revision: https://reviews.llvm.org/D24989
llvm-svn: 284533
This is a follow-up to D24816 - where we changed reciprocal estimates to be function attributes
rather than TargetOptions.
This patch is intended to be a structural, but not functional change. By moving all of the
TargetRecip functionality into TargetLowering, we can remove all of the reciprocal estimate
state, shield the callers from the string format implementation, and simplify/localize the
logic needed for a target to enable this.
If a function has a "reciprocal-estimates" attribute, those settings may override the target's
default reciprocal preferences for whatever operation and data type we're trying to optimize.
If there's no attribute string or specific setting for the op/type pair, just use the target
default settings.
As noted earlier, a better solution would be to move the reciprocal estimate settings to IR
instructions and SDNodes rather than function attributes, but that's a multi-step job that
requires infrastructure improvements. I intend to work on that, but it's not clear how long
it will take to get all the pieces in place.
Differential Revision: https://reviews.llvm.org/D25440
llvm-svn: 284495
In futher patches we shall have alignment field added to DIVariable family
and switching from uint64_t to uint32_t will save 4 bytes per variable.
Differential Revision: https://reviews.llvm.org/D25620
llvm-svn: 284482
This patch adds simplified support for tail calls on ARM with XRay instrumentation.
Known issue: compiled with generic flags: `-O3 -g -fxray-instrument -Wall
-std=c++14 -ffunction-sections -fdata-sections` (this list doesn't include my
specific flags like --target=armv7-linux-gnueabihf etc.), the following program
#include <cstdio>
#include <cassert>
#include <xray/xray_interface.h>
[[clang::xray_always_instrument]] void __attribute__ ((noinline)) fC() {
std::printf("In fC()\n");
}
[[clang::xray_always_instrument]] void __attribute__ ((noinline)) fB() {
std::printf("In fB()\n");
fC();
}
[[clang::xray_always_instrument]] void __attribute__ ((noinline)) fA() {
std::printf("In fA()\n");
fB();
}
// Avoid infinite recursion in case the logging function is instrumented (so calls logging
// function again).
[[clang::xray_never_instrument]] void simplyPrint(int32_t functionId, XRayEntryType xret)
{
printf("XRay: functionId=%d type=%d.\n", int(functionId), int(xret));
}
int main(int argc, char* argv[]) {
__xray_set_handler(simplyPrint);
printf("Patching...\n");
__xray_patch();
fA();
printf("Unpatching...\n");
__xray_unpatch();
fA();
return 0;
}
gives the following output:
Patching...
XRay: functionId=3 type=0.
In fA()
XRay: functionId=3 type=1.
XRay: functionId=2 type=0.
In fB()
XRay: functionId=2 type=1.
XRay: functionId=1 type=0.
XRay: functionId=1 type=1.
In fC()
Unpatching...
In fA()
In fB()
In fC()
So for function fC() the exit sled seems to be called too much before function
exit: before printing In fC().
Debugging shows that the above happens because printf from fC is also called as
a tail call. So first the exit sled of fC is executed, and only then printf is
jumped into. So it seems we can't do anything about this with the current
approach (i.e. within the simplification described in
https://reviews.llvm.org/D23988 ).
Differential Revision: https://reviews.llvm.org/D25030
llvm-svn: 284456
Summary:
There are differences in codegen between Linux and Windows due to:
1. Using std::sort which uses quicksort which is a non-stable sort.
2. Iterating over Set data structure where the iteration order is
non deterministic.
Reviewers: arsenm, grosbach, junbuml, zinob, MatzeB
Subscribers: MatzeB, wdng
Differential Revision: https://reviews.llvm.org/D25695
llvm-svn: 284441
As noted in:
https://reviews.llvm.org/D25685
This is the next-to-smallest step needed to enable the ComputeNumSignBits fix in that patch.
In a minor attempt to keep some structure, we're pulling the FP helper over along with its
integer sibling, but clearly we can and should do more refactoring of the similar helper
functions in DAGCombiner and SelectionDAG to simplify and not duplicate functionality.
llvm-svn: 284421
This came up as part of:
https://reviews.llvm.org/D25485
Note that the vector case is missed because ComputeNumSignBits() is deficient for vectors.
llvm-svn: 284395
SelectionDAG::getConstantPool will automatically determine an appropriate alignment if one is not specified. It does this by querying the type's preferred alignment. This can end up creating quite a lot of padding when the preferred alignment for vectors is 128.
In optimize-for-size mode, it makes sense to instead query the ABI type alignment which is often smaller and causes less padding.
llvm-svn: 284381
CodeGenPrepare knows how to move a zext of a load into the same basic block
where the load lives. The goal is to help ISel match a zero-extending load
instead of two separated instructions.
CGP attempts to move a zext computation even if it lives in a basic block that
does not post-dominate the load's basic block. That means, the hoisted zext may
be speculated. Preserving the zext location would hurt the debugging experience
and the quality of sample pgo.
With this patch, when moving a zext near to its associated load, CGP no longer
propagates the zext's debug location. Instead, CGP conservatively reuses the
same debug location for the load and the zext.
An alternative approach would be to assign an artificial line-0 location to the
zext. However we don't want to over-use the 'line-0' for this particular case
because it would have a size cost in the line-table section for no additional
benefit.
Differential Revision: https://reviews.llvm.org/D25611
llvm-svn: 284377
The previous names were both misleading (the MachineLegalizer actually
contained the info tables) and inconsistent with the selector & translator (in
having a "Machine") prefix. This should make everything sensible again.
The only functional change is the name of a couple of command-line options.
llvm-svn: 284287
Eli noted this potential bug in the post-commit thread for:
https://reviews.llvm.org/rL284239
...but I'm not sure how to trigger it, so there's no test case yet.
llvm-svn: 284268
Summary:
The main purpose of this new helper is to enable simplifying operations that
have multiple uses. SimplifyDemandedBits does not handle multiple uses
currently, and this new function makes it possible to optimize:
and v1, v0, 0xffffff
mul24 v2, v1, v1 ; Multiply ignoring high 8-bits.
To:
mul24 v2, v0, v0
Where before this would not be optimized, because v1 has multiple uses.
Reviewers: bogner, arsenm
Subscribers: nhaehnle, wdng, llvm-commits
Differential Revision: https://reviews.llvm.org/D24964
llvm-svn: 284266
X86. The pass optimizes as a unit the entire wide load + shuffles pattern
produced by interleaved vectorization. This initial patch optimizes one pattern
(64-bit elements interleaved by a factor of 4). Future patches will generalize
to additional patterns.
Patch by Farhana Aleen
Differential revision: http://reviews.llvm.org/D24681
llvm-svn: 284260
This will be needed by a future commit to support sign/zero extending from v8i8 to v8i64 which requires a sign/zero_extend_vector_inreg to be created which requires v8i8 to be concatenated upto v64i8 and goes through this code.
llvm-svn: 284204
Summary:
This operation is promoted the same way was ISD::BSWAP. This will
prevent a regression in test/Target/AMDGOU/bitreverse.ll when i16
support is implemented.
Reviewers: bogner, hfinkel
Subscribers: hfinkel, wdng, llvm-commits
Differential Revision: https://reviews.llvm.org/D25202
llvm-svn: 284163
the X86 subdirectory. Original commit message:
Requires a valid TargetMachine to be passed to the SafeStack pass.
Patch by Michael LeMay
Differential revision: http://reviews.llvm.org/D24896
llvm-svn: 284161
Relax the constraint for empty live-ranges while doing last chance
recoloring. Indeed, those live-ranges do not need an actual color to be
fond for the recoloring to work.
Empty live-range may happen as a result of splitting/spilling.
Unfortunately no test case for in-tree targets.
llvm-svn: 284152
Retrying after upstream changes.
Simplify Consecutive Merge Store Candidate Search
Now that address aliasing is much less conservative, push through
simplified store merging search which only checks for parallel stores
through the chain subgraph. This is cleaner as the separation of
non-interfering loads/stores from the store-merging logic.
Whem merging stores, search up the chain through a single load, and
finds all possible stores by looking down from through a load and a
TokenFactor to all stores visited. This improves the quality of the
output SelectionDAG and generally the output CodeGen (with some
exceptions).
Additional Minor Changes:
1. Finishes removing unused AliasLoad code
2. Unifies the the chain aggregation in the merged stores across
code paths
3. Re-add the Store node to the worklist after calling
SimplifyDemandedBits.
4. Increase GatherAllAliasesMaxDepth from 6 to 18. That number is
arbitrary, but seemed sufficient to not cause regressions in
tests.
This finishes the change Matt Arsenault started in r246307 and
jyknight's original patch.
Many tests required some changes as memory operations are now
reorderable. Some tests relying on the order were changed to use
volatile memory operations
Noteworthy tests:
CodeGen/AArch64/argument-blocks.ll -
It's not entirely clear what the test_varargs_stackalign test is
supposed to be asserting, but the new code looks right.
CodeGen/AArch64/arm64-memset-inline.lli -
CodeGen/AArch64/arm64-stur.ll -
CodeGen/ARM/memset-inline.ll -
The backend now generates *worse* code due to store merging
succeeding, as we do do a 16-byte constant-zero store efficiently.
CodeGen/AArch64/merge-store.ll -
Improved, but there still seems to be an extraneous vector insert
from an element to itself?
CodeGen/PowerPC/ppc64-align-long-double.ll -
Worse code emitted in this case, due to the improved store->load
forwarding.
CodeGen/X86/dag-merge-fast-accesses.ll -
CodeGen/X86/MergeConsecutiveStores.ll -
CodeGen/X86/stores-merging.ll -
CodeGen/Mips/load-store-left-right.ll -
Restored correct merging of non-aligned stores
CodeGen/AMDGPU/promote-alloca-stored-pointer-value.ll -
Improved. Correctly merges buffer_store_dword calls
CodeGen/AMDGPU/si-triv-disjoint-mem-access.ll -
Improved. Sidesteps loading a stored value and
merges two stores
CodeGen/X86/pr18023.ll -
This test has been removed, as it was asserting incorrect
behavior. Non-volatile stores *CAN* be moved past volatile loads,
and now are.
CodeGen/X86/vector-idiv.ll -
CodeGen/X86/vector-lzcnt-128.ll -
It's basically impossible to tell what these tests are actually
testing. But, looks like the code got better due to the memory
operations being recognized as non-aliasing.
CodeGen/X86/win32-eh.ll -
Both loads of the securitycookie are now merged.
CodeGen/AMDGPU/vgpr-spill-emergency-stack-slot-compute.ll -
This test appears to work but no longer exhibits the spill behavior.
Reviewers: arsenm, hfinkel, tstellarAMD, jyknight, nhaehnle
Subscribers: wdng, nhaehnle, nemanjai, arsenm, weimingz, niravd, RKSimon, aemerson, qcolombet, dsanders, resistor, tstellarAMD, t.p.northover, spatel
Differential Revision: https://reviews.llvm.org/D14834
llvm-svn: 284151
Summary: We need a new LLVM intrinsic to implement MS _AddressOfReturnAddress builtin on 64-bit Windows.
Reviewers: majnemer, rnk
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D25293
llvm-svn: 284061
Branch folder removes implicit defs if they are the only non-branching
instructions in a block, and the branches do not use the defined registers.
The problem is that in some cases these implicit defs are required for
the liveness information to be correct.
Differential Revision: https://reviews.llvm.org/D25478
llvm-svn: 284036
Add a number of helper functions to match scalar or vector equivalent constant/splat values to allow most of the combine patterns to be used by vectors.
Differential Revision: https://reviews.llvm.org/D25374
llvm-svn: 284015
This combiner breaks debug experience and should not be run when optimizations are disabled.
For example:
int main() {
int j = 0;
j += 2;
if (j == 2)
return 0;
return 5;
}
When debugging this code compiled in /O0, it should be valid to break at line "j+=2;" and edit the value of j. It should change the return value of the function.
Differential Revision: https://reviews.llvm.org/D19268
llvm-svn: 284014
Fixes a crash in the build_vector -> vector_shuffle combine
when the first vector input is twice as wide as the output,
and the second input vector is even wider.
llvm-svn: 283953
The tail duplication pass uses an assumed layout when making duplication
decisions. This is fine, but passes up duplication opportunities that
may arise when blocks are outlined. Because we want the updated CFG to
affect subsequent placement decisions, this change must occur during
placement.
In order to achieve this goal, TailDuplicationPass is split into a
utility class, TailDuplicator, and the pass itself. The pass delegates
nearly everything to the TailDuplicator object, except for looping over
the blocks in a function. This allows the same code to be used for tail
duplication in both places.
This change, in concert with outlining optional branches, allows
triangle shaped code to perform much better, esepecially when the
taken/untaken branches are correlated, as it creates a second spine when
the tests are small enough.
Issue from previous rollback fixed, and a new test was added for that
case as well. Issue was worklist/scheduling/taildup issue in layout.
Issue from 2nd rollback fixed, with 2 additional tests. Issue was
tail merging/loop info/tail-duplication causing issue with loops that share
a header block.
Issue with early tail-duplication of blocks that branch to a fallthrough
predecessor fixed with test case: tail-dup-branch-to-fallthrough.ll
Differential revision: https://reviews.llvm.org/D18226
llvm-svn: 283934
The non-obvious motivation for adding this fold (which already happens in InstCombine)
is that we want to canonicalize IR towards select instructions and canonicalize DAG
nodes towards boolean math. So we need to recreate some folds in the DAG to handle that
change in direction.
An interesting implementation difference for cases like this is that InstCombine
generally works top-down while the DAG goes bottom-up. That means we need to detect
different patterns. In this case, the SimplifyDemandedBits fold prevents us from
performing a zext to sext fold that would then be recognized as a negation of a sext.
llvm-svn: 283900
This reverts commit r283842.
test/CodeGen/X86/tail-dup-repeat.ll causes and llc crash with our
internal testing. I'll share a link with you.
llvm-svn: 283857
This changes MachineRegisterInfo to be initializes after parsing all
instructions. This is in preparation for upcoming commits that allow the
register class specification on the operand or deduce them from the
MCInstrDesc.
This commit removes the unused feature of having nonsequential register
numbers. This was confusing anyway as the vreg numbers would be
different after parsing when you had "holes" in your numbering.
This patch also introduces the concept of an incomplete virtual
register. An incomplete virtual register may be used during .mir parsing
to construct MachineOperands without knowing the exact register class
(or register bank) yet.
NFC except for some error messages.
Differential Revision: https://reviews.llvm.org/D22397
llvm-svn: 283848
The tail duplication pass uses an assumed layout when making duplication
decisions. This is fine, but passes up duplication opportunities that
may arise when blocks are outlined. Because we want the updated CFG to
affect subsequent placement decisions, this change must occur during
placement.
In order to achieve this goal, TailDuplicationPass is split into a
utility class, TailDuplicator, and the pass itself. The pass delegates
nearly everything to the TailDuplicator object, except for looping over
the blocks in a function. This allows the same code to be used for tail
duplication in both places.
This change, in concert with outlining optional branches, allows
triangle shaped code to perform much better, esepecially when the
taken/untaken branches are correlated, as it creates a second spine when
the tests are small enough.
Issue from previous rollback fixed, and a new test was added for that
case as well. Issue was worklist/scheduling/taildup issue in layout.
Issue from 2nd rollback fixed, with 2 additional tests. Issue was
tail merging/loop info/tail-duplication causing issue with loops that share
a header block.
Issue with early tail-duplication of blocks that branch to a fallthrough
predecessor fixed with test case: tail-dup-branch-to-fallthrough.ll
Differential revision: https://reviews.llvm.org/D18226
llvm-svn: 283842
Summary:
Previously, when allocating unspillable live ranges, we would never
attempt to split. We would always bail out and try last ditch graph
recoloring.
This patch changes this by attempting to split all live intervals before
performing recoloring.
This fixes LLVM bug PR14879.
I can't add test cases for any backends other than AVR because none of
them have small enough register classes to trigger the bug.
Reviewers: qcolombet
Subscribers: MatzeB
Differential Revision: https://reviews.llvm.org/D25070
llvm-svn: 283838
Add integer expansion for FLT_ROUNDS_ for targets where i32 is not a legal
type.
Patch by Edward Jones, thanks!
Differential Revision: https://reviews.llvm.org/D24459
llvm-svn: 283797
Masked-expand-load node represents load operation that loads a variable amount of elements from memory according to amount of "true" bits in the mask and expands the loaded elements according to their position in the mask vector.
Right now, the node is used in intrinsics for VEXPAND* instructions.
The work is done towards implementation of masked.expandload and masked.compressstore intrinsics.
Differential Revision: https://reviews.llvm.org/D25322
llvm-svn: 283694
The core of the change is supposed to be NFC, however it also fixes
what I believe was an undefined behavior when calling:
va_start(ValueArgs, Desc);
with Desc being a StringRef.
Differential Revision: https://reviews.llvm.org/D25342
llvm-svn: 283671
The tail duplication pass uses an assumed layout when making duplication
decisions. This is fine, but passes up duplication opportunities that
may arise when blocks are outlined. Because we want the updated CFG to
affect subsequent placement decisions, this change must occur during
placement.
In order to achieve this goal, TailDuplicationPass is split into a
utility class, TailDuplicator, and the pass itself. The pass delegates
nearly everything to the TailDuplicator object, except for looping over
the blocks in a function. This allows the same code to be used for tail
duplication in both places.
This change, in concert with outlining optional branches, allows
triangle shaped code to perform much better, esepecially when the
taken/untaken branches are correlated, as it creates a second spine when
the tests are small enough.
Issue from previous rollback fixed, and a new test was added for that
case as well. Issue was worklist/scheduling/taildup issue in layout.
Issue from 2nd rollback fixed, with 2 additional tests. Issue was
tail merging/loop info/tail-duplication causing issue with loops that share
a header block.
Differential revision: https://reviews.llvm.org/D18226
llvm-svn: 283619
The code used llvm basic block predecessors to decided where to insert phi
nodes. Instruction selection can and will liberally insert new machine basic
block predecessors. There is not a guaranteed one-to-one mapping from pred.
llvm basic blocks and machine basic blocks.
Therefore the current approach does not work as it assumes we can mark
predecessor machine basic block as needing a copy, and needs to know the set of
all predecessor machine basic blocks to decide when to insert phis.
Instead of computing the swifterror vregs as we select instructions, propagate
them at the end of instruction selection when the MBB CFG is complete.
When an instruction needs a swifterror vreg and we don't know the value yet,
generate a new vreg and remember this "upward exposed" use, and reconcile this
at the end of instruction selection.
This will only happen if the target supports promoting swifterror parameters to
registers and the swifterror attribute is used.
rdar://28300923
llvm-svn: 283617
Summary: -fsample-profile needs discriminator, which will not be added if built with -g0. This patch makes sure the discriminator is added for sample-profile at -g0. A followup patch will be send out to update clang tests.
Reviewers: davidxl, dblaikie, echristo, dnovillo
Subscribers: mehdi_amini, probinson, llvm-commits
Differential Revision: https://reviews.llvm.org/D25132
llvm-svn: 283565
Summary:
These nodes need legalization for 3-element vectors. This commit
handles the legalization and adds tests for zext and sext.
This fixes PR30614.
Reviewers: RKSimon, srhines
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D25268
llvm-svn: 283496
This generalizes the build_vector -> vector_shuffle combine to support any
number of inputs. The idea is to create a binary tree of shuffles, where
the first layer performs pairwise shuffles of the input vectors placing each
input element into the correct lane, and the rest of the tree blends these
shuffles together.
This doesn't try to be smart and create any sort of "optimal" shuffles.
The assumption is that even a "poor" shuffle sequence is better than extracting
and inserting the elements one by one.
Differential Revision: https://reviews.llvm.org/D24683
llvm-svn: 283480
If we don't truncate, LLVM asserts when the label difference doesn't fit
in a 16 bit field. This patch truncates two kinds of data: trailing null
terminated names in symbol records, and inline line tables. The inline
line table test that I have is too large (many MB), so I'm not checking
it in.
Hopefully fixes PR28264.
llvm-svn: 283403
Summary: This makes a change to the state used to maintain visited information for depth first iterator. We know assume a method "completed(...)" which is called after all children of a node have been visited. In all existing cases, this method does nothing so this patch has no functional changes. It will however allow a client to distinguish back from cross edges in a DFS tree.
Reviewers: nadav, mehdi_amini, dberlin
Subscribers: MatzeB, mzolotukhin, twoh, freik, llvm-commits
Differential Revision: https://reviews.llvm.org/D25191
llvm-svn: 283391
This allows LLVM to describe locations of aggregate variables that have
been split by SROA.
Fixes PR29141
Reviewers: amccarth, majnemer
Differential Revision: https://reviews.llvm.org/D25253
llvm-svn: 283388
Previously we would give up when we saw the bitpiece DWARF expression
and print "[complex expression]" when actually we handled bitpiece
expressions outside the loop.
llvm-svn: 283355
Summary: Both computeKnownBits and ComputeNumSignBits can now do a simple
look-through of EXTRACT_VECTOR_ELT. It will compute the result based
on the known bits (or known sign bits) for the vector that the element
is extracted from.
Reviewers: bogner, tstellarAMD, mkuper
Subscribers: wdng, RKSimon, jyknight, llvm-commits, nhaehnle
Differential Revision: https://reviews.llvm.org/D25007
llvm-svn: 283347
This reverts commit 062ace9764953e9769142c1099281a345f9b6bdc.
Issue with loop info and block removal revealed by polly.
I have a fix for this issue already in another patch, I'll re-roll this
together with that fix, and a test case.
llvm-svn: 283292
The tail duplication pass uses an assumed layout when making duplication
decisions. This is fine, but passes up duplication opportunities that
may arise when blocks are outlined. Because we want the updated CFG to
affect subsequent placement decisions, this change must occur during
placement.
In order to achieve this goal, TailDuplicationPass is split into a
utility class, TailDuplicator, and the pass itself. The pass delegates
nearly everything to the TailDuplicator object, except for looping over
the blocks in a function. This allows the same code to be used for tail
duplication in both places.
This change, in concert with outlining optional branches, allows
triangle shaped code to perform much better, esepecially when the
taken/untaken branches are correlated, as it creates a second spine when
the tests are small enough.
Issue from previous rollback fixed, and a new test was added for that
case as well.
Differential revision: https://reviews.llvm.org/D18226
llvm-svn: 283274
The motivation for the change is that we can't have pseudo-global settings for
codegen living in TargetOptions because that doesn't work with LTO.
Ideally, these reciprocal attributes will be moved to the instruction-level via
FMF, metadata, or something else. But making them function attributes is at least
an improvement over the current state.
The ingredients of this patch are:
Remove the reciprocal estimate command-line debug option.
Add TargetRecip to TargetLowering.
Remove TargetRecip from TargetOptions.
Clean up the TargetRecip implementation to work with this new scheme.
Set the default reciprocal settings in TargetLoweringBase (everything is off).
Update the PowerPC defaults, users, and tests.
Update the x86 defaults, users, and tests.
Note that if this patch needs to be reverted, the related clang patch checked in
at r283251 should be reverted too.
Differential Revision: https://reviews.llvm.org/D24816
llvm-svn: 283252
The SMULO/UMULO DAG nodes, when not directly supported by the target,
expand to a multiplication twice as wide. In case that the resulting
type is not legal, an __mul?i3 intrinsic is used. Since the type is
not legal, the legalizer cannot directly call the intrinsic with
the wide arguments; instead, it "pre-lowers" them by splitting them
in halves.
The "pre-lowering" code in essence made assumptions about
the calling convention, specifically that i(N*2) values will be
split into two iN values and passed in consecutive registers in
little-endian order. This, naturally, breaks on a big-endian system,
such as our OR1K out-of-tree backend.
Thanks to James Miller <james@aatch.net> for help in debugging.
Differential Revision: https://reviews.llvm.org/D25223
llvm-svn: 283203
The tail duplication pass uses an assumed layout when making duplication
decisions. This is fine, but passes up duplication opportunities that
may arise when blocks are outlined. Because we want the updated CFG to
affect subsequent placement decisions, this change must occur during
placement.
In order to achieve this goal, TailDuplicationPass is split into a
utility class, TailDuplicator, and the pass itself. The pass delegates
nearly everything to the TailDuplicator object, except for looping over
the blocks in a function. This allows the same code to be used for tail
duplication in both places.
This change, in concert with outlining optional branches, allows
triangle shaped code to perform much better, esepecially when the
taken/untaken branches are correlated, as it creates a second spine when
the tests are small enough.
llvm-svn: 283164
Summary:
Previously, when allocating unspillable live ranges, we would never
attempt to split. We would always bail out and try last ditch graph
recoloring.
This patch changes this by attempting to split all live intervals before
performing recoloring.
This fixes LLVM bug PR14879.
I can't add test cases for any backends other than AVR because none of
them have small enough register classes to trigger the bug.
Reviewers: qcolombet
Subscribers: MatzeB
Differential Revision: https://reviews.llvm.org/D25070
llvm-svn: 282852
Instead of producing a mapping for all the operands, we only generate a
mapping for the definition. Indeed, the other operands are not
constrained by the instruction and thus, we should leave the choice to
the actual definition to do the right thing.
In pratice this is almost NFC, but with one advantage. We will have only
one instance of OperandsMapping for each copy and phi that map to one
register bank instead of one different instance for each different
number of operands for each copy and phi.
llvm-svn: 282756
The VS debugger doesn't appear to understand the 0x68 or 0x69 type
indices, which were probably intended for use on a platform where a C
'int' is 8 bits. So, use the character types instead. Clang was already
using the character types because '[u]int8_t' is usually defined in
terms of 'char'.
See the Rust issue for screenshots of what VS does:
https://github.com/rust-lang/rust/issues/36646
Fixes PR30552
llvm-svn: 282739
This is a step toward statically allocate InstructionMapping. Like the
previous few commits, the goal is to move toward a TableGen'ed like
structure with no dynamic allocation at all.
This should already improve compile time by getting rid of a bunch of
memmove of SmallVectors.
llvm-svn: 282643
LiveDebugVariables doesn't propagate DBG_VALUEs accross basic block
boundaries any more; this functionality was split into LiveDebugValues.
We can thus drop the now dead references to LexicalScopes from LiveDebugVariables.
llvm-svn: 282638
Normally, if conversion would add implicit uses for redefined registers,
e.g. R0<def> = add_if ..., R0<imp-use>. However, if only subregisters of
R0 are known to be live but not R0 itself, such implicit uses will not be
added, causing prior definitions of such subregisters and R0 itself to
become dead.
llvm-svn: 282626
This addresses PR26055 LiveDebugValues is very slow.
Contrary to the old LiveDebugVariables pass LiveDebugValues currently
doesn't look at the lexical scopes before inserting a DBG_VALUE
intrinsic. This means that we often propagate DBG_VALUEs much further
down than necessary. This is especially noticeable in large C++
functions with many inlined method calls that all use the same
"this"-pointer.
For example, in the following code it makes no sense to propagate the
inlined variable a from the first inlined call to f() into any of the
subsequent basic blocks, because the variable will always be out of
scope:
void sink(int a);
void __attribute((always_inline)) f(int a) { sink(a); }
void foo(int i) {
f(i);
if (i)
f(i);
f(i);
}
This patch reuses the LexicalScopes infrastructure we have for
LiveDebugVariables to take this into account.
The effect on compile time and memory consumption is quite noticeable:
I tested a benchmark that is a large C++ source with an enormous
amount of inlined "this"-pointers that would previously eat >24GiB
(most of them for DBG_VALUE intrinsics) and whose compile time was
dominated by LiveDebugValues. With this patch applied the memory
consumption is 1GiB and 1.7% of the time is spent in LiveDebugValues.
https://reviews.llvm.org/D24994
Thanks to Daniel Berlin and Keith Walker for reviewing!
llvm-svn: 282611
Simplify Consecutive Merge Store Candidate Search
Now that address aliasing is much less conservative, push through
simplified store merging search which only checks for parallel stores
through the chain subgraph. This is cleaner as the separation of
non-interfering loads/stores from the store-merging logic.
Whem merging stores, search up the chain through a single load, and
finds all possible stores by looking down from through a load and a
TokenFactor to all stores visited. This improves the quality of the
output SelectionDAG and generally the output CodeGen (with some
exceptions).
Additional Minor Changes:
1. Finishes removing unused AliasLoad code
2. Unifies the the chain aggregation in the merged stores across
code paths
3. Re-add the Store node to the worklist after calling
SimplifyDemandedBits.
4. Increase GatherAllAliasesMaxDepth from 6 to 18. That number is
arbitrary, but seemed sufficient to not cause regressions in
tests.
This finishes the change Matt Arsenault started in r246307 and
jyknight's original patch.
Many tests required some changes as memory operations are now
reorderable. Some tests relying on the order were changed to use
volatile memory operations
Noteworthy tests:
CodeGen/AArch64/argument-blocks.ll -
It's not entirely clear what the test_varargs_stackalign test is
supposed to be asserting, but the new code looks right.
CodeGen/AArch64/arm64-memset-inline.lli -
CodeGen/AArch64/arm64-stur.ll -
CodeGen/ARM/memset-inline.ll -
The backend now generates *worse* code due to store merging
succeeding, as we do do a 16-byte constant-zero store efficiently.
CodeGen/AArch64/merge-store.ll -
Improved, but there still seems to be an extraneous vector insert
from an element to itself?
CodeGen/PowerPC/ppc64-align-long-double.ll -
Worse code emitted in this case, due to the improved store->load
forwarding.
CodeGen/X86/dag-merge-fast-accesses.ll -
CodeGen/X86/MergeConsecutiveStores.ll -
CodeGen/X86/stores-merging.ll -
CodeGen/Mips/load-store-left-right.ll -
Restored correct merging of non-aligned stores
CodeGen/AMDGPU/promote-alloca-stored-pointer-value.ll -
Improved. Correctly merges buffer_store_dword calls
CodeGen/AMDGPU/si-triv-disjoint-mem-access.ll -
Improved. Sidesteps loading a stored value and merges two stores
CodeGen/X86/pr18023.ll -
This test has been removed, as it was asserting incorrect
behavior. Non-volatile stores *CAN* be moved past volatile loads,
and now are.
CodeGen/X86/vector-idiv.ll -
CodeGen/X86/vector-lzcnt-128.ll -
It's basically impossible to tell what these tests are actually
testing. But, looks like the code got better due to the memory
operations being recognized as non-aliasing.
CodeGen/X86/win32-eh.ll -
Both loads of the securitycookie are now merged.
CodeGen/AMDGPU/vgpr-spill-emergency-stack-slot-compute.ll -
This test appears to work but no longer exhibits the spill
behavior.
Reviewers: arsenm, hfinkel, tstellarAMD, nhaehnle, jyknight
Subscribers: wdng, nhaehnle, nemanjai, arsenm, weimingz, niravd, RKSimon, aemerson, qcolombet, resistor, tstellarAMD, t.p.northover, spatel
Differential Revision: https://reviews.llvm.org/D14834
llvm-svn: 282600
This check currently doesn't seem to do anything useful on any in-tree target:
On non-x86, it always evaluates to false, so we never hit the code path that
creates the shuffle with zero.
On x86, it just forwards to isShuffleMaskLegal(), which is a reasonable thing to
query in general, but doesn't make sense if only restricted to zero blends.
Differential Revision: https://reviews.llvm.org/D24625
llvm-svn: 282567
Summary:
The current implementation of isConstantPhysReg() checks for defs of
physical registers to determine if they are constant. Some
architectures (e.g. AArch64 XZR/WZR) have registers that are constant
and may be used as destinations to indicate the generated value is
discarded, preventing isConstantPhysReg() from returning true. This
change adds a TargetRegisterInfo hook that overrides the no defs check
for cases such as this.
Reviewers: MatzeB, qcolombet, t.p.northover, jmolloy
Subscribers: junbuml, aemerson, mcrosier, rengolin
Differential Revision: https://reviews.llvm.org/D24570
llvm-svn: 282543
Variables are sometimes missing their debug location information in
blocks in which the variables should be available. This would occur
when one or more predecessor blocks had not yet been visited by the
routine which propagated the information from predecessor blocks.
This is addressed by only considering predecessor blocks which have
already been visited.
The solution to this problem was suggested by Daniel Berlin on the
LLVM developer mailing list.
Differential Revision: https://reviews.llvm.org/D24927
llvm-svn: 282506
Many high-performance processors have a dedicated branch predictor for
indirect branches, commonly used with jump tables. As sophisticated as such
branch predictors are, they tend to have well defined limits beyond which
their effectiveness is hampered or even nullified. One such limit is the
number of possible destinations for a given indirect branches that such
branch predictors can handle.
This patch considers a limit that a target may set to the number of
destination addresses in a jump table.
Patch by: Evandro Menezes <e.menezes@samsung.com>, Aditya Kumar
<aditya.k7@samsung.com>, Sebastian Pop <s.pop@samsung.com>.
Differential revision: https://reviews.llvm.org/D21940
llvm-svn: 282412
If a constant is unamed_addr and is only used within one function, we can save
on the code size and runtime cost of an indirection by changing the global's storage
to inside the constant pool. For example, instead of:
ldr r0, .CPI0
bl printf
bx lr
.CPI0: &format_string
format_string: .asciz "hello, world!\n"
We can emit:
adr r0, .CPI0
bl printf
bx lr
.CPI0: .asciz "hello, world!\n"
This can cause significant code size savings when many small strings are used in one
function (4 bytes per string).
This recommit contains fixes for a nasty bug related to fast-isel fallback - because
fast-isel doesn't know about this optimization, if it runs and emits references to
a string that we inline (because fast-isel fell back to SDAG) we will end up
with an inlined string and also an out-of-line string, and we won't emit the
out-of-line string, causing backend failures.
It also contains fixes for emitting .text relocations which made the sanitizer
bots unhappy.
llvm-svn: 282387
This is a step toward statically allocate ValueMapping. Like the
previous few commits, the goal is to move toward a TableGen'ed like
structure with no dynamic allocation at all.
llvm-svn: 282324
Previously we were using the address of the unique instance of a partial
mapping in the related map to access this instance. However, when the
map grows, the whole set of instances may be moved elsewhere and the
previous addresses are not valid anymore.
Instead, keep the address of the unique heap allocated instance of a
partial mapping.
Note: I did not see any actual bugs for that problem as the number of
partial mappings dynamically allocated is small (<= 4).
llvm-svn: 282323
As the development of GlobalISel move forward, this statistic should
strictly decrease until it reaches zero. At this point, it would mean
GlobalISel can replace SDISel (at least on the tested inputs :P).
llvm-svn: 282275
Collect statistics about the number of partial mappings dynamically
allocated and accessed. Ultimately, when the whole TableGen
infrastructure is set, those numbers should be zero.
llvm-svn: 282274
In the verify method of the ValueMapping class we used to check that the
mapping exactly matches the bits of the input value. This is problematic
for statically allocated mappings because we would need a different
mapping for each different size of the value that maps on one
instruction. For instance, with such scheme, we would need a different
mapping for a value of size 1, 5, 23 whereas they all end up on a 32-bit
wide instruction.
Therefore, change the verifier to check that the meaningful bits are
covered by the mapping instead of matching them.
llvm-svn: 282214
This is another step toward TableGen'ed like structures. The BreakDown of
the mapping of the value will be statically computed by TableGen, thus
we only have to point to the right entry in the table instead of
dynamically allocate the mapping for each instruction.
We still support the dynamic allocation through a factory of
PartialMapping to ease the bring-up of the targets while the TableGen
backend is not available.
llvm-svn: 282213
Currently all nodes get added to the NextSU list when they are released,
so any candidate must be in that list, making the heuristic ineffective.
Remove it for now, we can add it back later in a working fashion if
necessary.
llvm-svn: 282200
According to MSDN (see the PR), functions which don't touch any callee-saved
registers (including %rsp) don't need any unwind info.
This patch makes LLVM not emit unwind info for such functions, to save
binary size.
Differential Revision: https://reviews.llvm.org/D24748
llvm-svn: 282185
This commit is basically the first step toward what will
RegisterBankInfo look when it gets TableGen'ed.
It introduces a XXXGenRegisterBankInfo.def file that is what TableGen
will issue at some point. Moreover, the RegBanks field in
RegisterBankInfo changed to reflect the static (compile time) aspect of
the information.
llvm-svn: 282131
When initializing an instance of OperandsMapper, instead of using
SmallVector::resize followed by std::fill, use the function that
directly does that in SmallVector.
llvm-svn: 282130
We still don't really have an equivalent of "AssertXExt" in DAG, so we don't
exploit the guarantees on the receiving side yet, but this should produce
conservatively correct code on iOS ABIs.
llvm-svn: 282069
The only implementation that exists immediately looks it up anyway, and the
information is needed to handle various parameter attributes (stored on the
function itself).
llvm-svn: 282068
TargetMachine::getNameWithPrefix and inline the result into the singular
caller." and "Remove more guts of TargetMachine::getNameWithPrefix and
migrate one check to the TLOF mach-o version." temporarily until I can
get the whole call migrated out of the TargetMachine as we could hit
places where TLOF isn't valid.
This reverts commits r281981 and r281983.
llvm-svn: 282028
This check caused us to skip adding layout information for calls to
alloca in sspreq/sspstrong mode. We check properly for sspstrong later
on (and add the correct layout info when doing so), so removing this
shouldn't hurt.
No test is included, since testing this using lit seems to require
checking for exact offsets in asm, which is something that the lit tests
for this avoid. If someone cares deeply, I'm happy to write a unittest
or something to cover this, but that feels like overkill.
Patch by Daniel Micay.
Differential Revision: https://reviews.llvm.org/D22714
llvm-svn: 282022
Previously, such section would be marked as SHT_PROGBITS which
makes it impossible to use an initialized C variable declaration
to emit an (allocated) ELF note. The new behavior is also consistent
with ELF assembly parser.
Differential Revision: https://reviews.llvm.org/D24692
llvm-svn: 282010
CodeView has an S_COMPILE3 record to identify the compiler and source language of the compiland. This record comes first in the debug$S section for the compiland. The debuggers rely on this record to know the source language of the code.
There was a little test fallout from introducing a new record into the symbols subsection.
Differential Revision: https://reviews.llvm.org/D24317
llvm-svn: 281990
This should match the existing behaviour for passing complicated struct and
array types, in particular HFAs come through like that from Clang.
For C & C++ we still need to somehow support all the weird ABI flags, or at
least those that are present in the IR (signext, byval, ...), and stack-based
parameter passing.
llvm-svn: 281977
It is legal to merge instructions with different undef flags; However we
must drop the undef flag from the merged instruction if it isn't present
everywhere.
This fixes http://llvm.org/PR30199
llvm-svn: 281957
The OperandsMapper class is used heavy in RegBankSelect and each
instantiation triggered a heap allocation for the array of operands.
Instead, use a SmallVector with a big enough size such that most of the
cases do not have to use dynamically allocated memory.
This improves the compile time of the RegBankSelect pass.
llvm-svn: 281916
Machine programs need a definition of each vreg before reaching a use
(the definition may come from an IMPLICIT_DEF instruction). This class
of errors is not detected by the MachineVerifier because of efficiency
concerns. LiveRangeCalc used to report these problems, make it do that
again (followup to r279625).
Also use report_fatal_error() instead of llvm_unreachable() as the error
reporting is only present in asserts build anyway.
llvm-svn: 281914
This is a port of XRay to ARM 32-bit, without Thumb support yet. The XRay instrumentation support is moving up to AsmPrinter.
This is one of 3 commits to different repositories of XRay ARM port. The other 2 are:
https://reviews.llvm.org/D23932 (Clang test)
https://reviews.llvm.org/D23933 (compiler-rt)
Differential Revision: https://reviews.llvm.org/D23931
llvm-svn: 281878
With D24253 we can now use SelectionDAG::SignBitIsZero with vector operations.
This patch uses SelectionDAG::SignBitIsZero to recognise that a zero sign bit means that we can use a sitofp instead of a uitofp (which is not directly support on pre-AVX512 hardware).
While AVX512 does provide support for uitofp, the conversion to sitofp should not cause any regressions.
Differential Revision: https://reviews.llvm.org/D24343
llvm-svn: 281852
The ValueSymbolTable is used to detect name conflict and rename
instructions automatically. This is not needed when the value
names are automatically discarded by the LLVMContext.
No functional change intended, just saving a little bit of memory.
This is a recommit of r281806 after fixing the accessor to return
a pointer instead of a reference and updating all the call-sites.
llvm-svn: 281813
This is a fix for PR30318.
Clang may generate IR where an alloca is already live when entering a
BB with lifetime.start. In this case, conservatively extend the
alloca lifetime all the way back to the block entry.
llvm-svn: 281784
When trying to recolor a register we may split live-ranges in the
process. When we create new live-ranges we will have to process them,
but when we move a register from Assign to Split, the allocation is not
changed until the whole recoloring session is successful.
Therefore, only push the live-ranges that changed from Assign to
Split when the recoloring is successful.
Same as the previous commit, I was not able to produce a test case that
reproduce the problem with in-tree targets.
Note: The bug has been here since the recoloring scheme has been added
back in r200883 (Feb 2014).
llvm-svn: 281783
When last chance recoloring is used, the list of NewVRegs may not be
empty when calling selectOrSplitImpl. Indeed, another coloring may have
taken place with splitting/spilling in the same recoloring session.
Relax an assertion to take this into account and adapt a condition to
act as if the NewVRegs were local to this selectOrSplitImpl instance.
Unfortunately I am unable to produce a test case for this, I was only
able to reproduce the conditions on an out-of-tree target.
llvm-svn: 281782
When a phi node is finally lowered to a machine instruction it is
important that the lowered "load" instruction is placed before the
associated DEBUG_VALUE entry describing the value loaded.
Renamed the existing SkipPHIsAndLabels to SkipPHIsLabelsAndDebug to
more fully describe that it also skips debug entries. Then used the
"new" function SkipPHIsAndLabels when the debug information should not
be skipped when placing the lowered "load" instructions so that it is
placed before the debug entries.
Differential Revision: https://reviews.llvm.org/D23760
llvm-svn: 281727
It was only really there as a sentinel when instructions had to have precisely
one type. Now that registers are typed, each register really has to have a type
that is sized.
llvm-svn: 281599
Otherwise everything that needs to work out what size they are has to keep a
DataLayout handy, which is a bit silly and very annoying.
llvm-svn: 281597
Summary:
It was previously not possible for tools to use solely the stackmap
information emitted to reconstruct the return addresses of callsites in
the map, which is necessary to use the information to walk a stack. This
patch adds per-function callsite counts when emitting the stackmap
section in order to resolve the problem. Note that this slightly alters
the stackmap format, so external tools parsing these maps will need to
be updated.
**Problem Details:**
Records only store their offset from the beginning of the function they
belong to. While these records and the functions are output in program
order, it is not possible to determine where the end of one function's
records are without the callsite count when processing the records to
compute return addresses.
Patch by Kavon Farvardin!
Reviewers: atrick, ributzka, sanjoy
Subscribers: nemanjai
Differential Revision: https://reviews.llvm.org/D23487
llvm-svn: 281532
in order to make sure that its TargetMachine constructor is
registered.
This allows us to run the PEI machine pass with MIR input
(see PR30324).
llvm-svn: 281474
Summary: When expanding mul in type legalization make sure the type for shift amount can actually fit the value. This fixes PR30354 https://llvm.org/bugs/show_bug.cgi?id=30354.
Reviewers: hfinkel, majnemer, RKSimon
Subscribers: RKSimon, llvm-commits
Differential Revision: https://reviews.llvm.org/D24478
llvm-svn: 281403
This allows us to, in some cases, create a vector_shuffle out of a build_vector, when
the inputs to the build are extract_elements from two different vectors, at least one
of which is wider than the output. (E.g. a <8 x i16> being constructed out of
elements from a <16 x i16> and a <8 x i16>).
Differential Revision: https://reviews.llvm.org/D24491
llvm-svn: 281402
To avoid assertion, we must ensure that the inner shift constant is within range before calling ConstantSDNode::getZExtValue(). We already know that the outer shift constant is in range.
Followup to D23007
llvm-svn: 281362
This patch reverses the edge from DIGlobalVariable to GlobalVariable.
This will allow us to more easily preserve debug info metadata when
manipulating global variables.
Fixes PR30362. A program for upgrading test cases is attached to that
bug.
Differential Revision: http://reviews.llvm.org/D20147
llvm-svn: 281284
This should make it easier to add cases that we currently don't cover,
like supporting more kinds of type mismatches and more than 2 input vectors.
llvm-svn: 281283
Summary: If consecutive select instructions are lowered separately in CGP, it will introduce redundant condition check and branches that cannot be removed by later optimization phases. This patch lowers all consecutive select instructions at the same to to avoid inefficent code as demonstrated in https://llvm.org/bugs/show_bug.cgi?id=29095
Reviewers: davidxl
Subscribers: vsk, llvm-commits
Differential Revision: https://reviews.llvm.org/D24147
llvm-svn: 281252
Unlike SDag, we use a separate G_GEP instruction (much simplified, only taking
a single byte offset) to preserve the pointer type information through
selection.
llvm-svn: 281205
Some generic instructions have multiple types. While in theory these always be
discovered by inspecting the single definition of each generic vreg, in
practice those definitions won't always be local and traipsing through a big
function to find them will not be fun.
So this changes MIRPrinter to print out the type of uses as well as defs, if
they're known to be different or not known to be the same.
On the parsing side, we're a little more flexible: provided each register is
given a type in at least one place it's mentioned (and all types are
consistent) we accept the MIR. This doesn't introduce ambiguity but makes
writing tests manually a bit less painful.
llvm-svn: 281204
Now that MachineBasicBlock::reverse_instr_iterator knows when it's at
the end (since r281168 and r281170), implement
MachineBasicBlock::reverse_iterator directly on top of an
ilist::reverse_iterator by adding an IsReverse template parameter to
MachineInstrBundleIterator. This replaces another hard-to-reason-about
use of std::reverse_iterator on list iterators, matching the changes for
ilist::reverse_iterator from r280032 (see the "out of scope" section at
the end of that commit message). MachineBasicBlock::reverse_iterator
now has a handle to the current node and has obvious invalidation
semantics.
r280032 has a more detailed explanation of how list-style reverse
iterators (invalidated when the pointed-at node is deleted) are
different from vector-style reverse iterators like std::reverse_iterator
(invalidated on every operation). A great motivating example is this
commit's changes to lib/CodeGen/DeadMachineInstructionElim.cpp.
Note: If your out-of-tree backend deletes instructions while iterating
on a MachineBasicBlock::reverse_iterator or converts between
MachineBasicBlock::iterator and MachineBasicBlock::reverse_iterator,
you'll need to update your code in similar ways to r280032. The
following table might help:
[Old] ==> [New]
delete &*RI, RE = end() delete &*RI++
RI->erase(), RE = end() RI++->erase()
reverse_iterator(I) std::prev(I).getReverse()
reverse_iterator(I) ++I.getReverse()
--reverse_iterator(I) I.getReverse()
reverse_iterator(std::next(I)) I.getReverse()
RI.base() std::prev(RI).getReverse()
RI.base() ++RI.getReverse()
--RI.base() RI.getReverse()
std::next(RI).base() RI.getReverse()
(For more details, have a look at r280032.)
llvm-svn: 281172
This is a prep commit before fixing MachineBasicBlock::reverse_iterator
invalidation semantics, ala r281167 for ilist::reverse_iterator. This
changes MachineBasicBlock::Instructions to track which node is the
sentinel regardless of LLVM_ENABLE_ABI_BREAKING_CHECKS.
There's almost no functionality change (aside from ABI). However, in
the rare configuration:
#if !defined(NDEBUG) && !defined(LLVM_ENABLE_ABI_BREAKING_CHECKS)
the isKnownSentinel() assertions in ilist_iterator<>::operator* suddenly
have teeth for MachineInstr. If these assertions start firing for your
out-of-tree backend, have a look at the suggestions in the commit
message for r279314, and at some of the commits leading up to it that
avoid dereferencing the end() iterator.
llvm-svn: 281168
Summary:
An IR load can be invariant, dereferenceable, neither, or both. But
currently, MI's notion of invariance is IR-invariant &&
IR-dereferenceable.
This patch splits up the notions of invariance and dereferenceability at
the MI level. It's NFC, so adds some probably-unnecessary
"is-dereferenceable" checks, which we can remove later if desired.
Reviewers: chandlerc, tstellarAMD
Subscribers: jholewinski, arsenm, nemanjai, llvm-commits
Differential Revision: https://reviews.llvm.org/D23371
llvm-svn: 281151
Summary:
I want to separate out the notions of invariance and dereferenceability
at the MI level, so that they correspond to the equivalent concepts at
the IR level. (Currently an MI load is MI-invariant iff it's
IR-invariant and IR-dereferenceable.)
First step is renaming this function.
Reviewers: chandlerc
Subscribers: MatzeB, jfb, llvm-commits
Differential Revision: https://reviews.llvm.org/D23370
llvm-svn: 281125
Move the target specific setup into the target specific lowering setup. As
pointed out by Anton, the initial change was moving this too high up the stack
resulting in a violation of the layering (the target generic code path setup
target specific bits). Sink this into the ARM specific setup. NFC.
llvm-svn: 281088
This writes the full sequence of type records described in
Yaml to the TPI stream of the PDB file.
Reviewed By: rnk
Differential Revision: https://reviews.llvm.org/D24316
llvm-svn: 281063
This can happen when the frontend knows the debug info will be emitted
somewhere else. Usually this happens for dynamic classes with out of
line constructors or key functions, but it can also happen when modules
are enabled.
llvm-svn: 281060
These instructions were only necessary when type information was stored in the
MachineInstr (because only generic MachineInstrs possessed a type). Now that
it's in MachineRegisterInfo, COPY and PHI work fine.
llvm-svn: 281037
We want each register to have a canonical type, which means the best place to
store this is in MachineRegisterInfo rather than on every MachineInstr that
happens to use or define that register.
Most changes following from this are pretty simple (you need an MRI anyway if
you're going to be doing any transformations, so just check the type there).
But legalization doesn't really want to check redundant operands (when, for
example, a G_ADD only ever has one type) so I've made use of MCInstrDesc's
operand type field to encode these constraints and limit legalization's work.
As an added bonus, more validation is possible, both in MachineVerifier and
MachineIRBuilder (coming soon).
llvm-svn: 281035
mapping a yaml field to an object in code has always been
a stateless operation. You could still pass state by using the
`setContext` function of the YAMLIO object, but this represented
global state for the entire yaml input. In order to have
context-sensitive state, it is necessary to pass this state in
at the granularity of an individual mapping.
This patch adds support for this type of context-sensitive state.
You simply pass an additional argument of type T to the
`mapRequired` or `mapOptional` functions, and provided you have
specialized a `MappingContextTraits<U, T>` class with the
appropriate mapping function, you can pass this context into
the mapping function.
Reviewed By: chandlerc
Differential Revision: https://reviews.llvm.org/D24162
llvm-svn: 280977
And associated commits, as they broke the Thumb bots.
This reverts commit r280935.
This reverts commit r280891.
This reverts commit r280888.
llvm-svn: 280967
Add the ability to computeKnownBits and SimplifyDemandedBits to extract the known zero/one bits from BUILD_VECTOR, returning the known bits that are shared by every vector element.
This is an initial step towards determining the sign bits of a vector (PR29079).
Differential Revision: https://reviews.llvm.org/D24253
llvm-svn: 280927
CGP tail-duplicates rets into blocks that end with a call that feed the ret.
This puts the call in tail position, potentially allowing the DAG builder to
lower it as a tail call. To avoid tail duplication in cases where we won't
form the tail call, CGP tried to predict whether this is going to be possible,
and avoids doing it when lowering as a tail call will definitely fail.
However, it was being too conservative by always throwing away calls to
functions with a signext/zeroext attribute on the return type.
Instead, we can use the same logic the builder uses to determine whether the
attributes work out.
Differential Revision: https://reviews.llvm.org/D24315
llvm-svn: 280894
This is a port of XRay to ARM 32-bit, without Thumb support yet. The XRay instrumentation support is moving up to AsmPrinter.
This is one of 3 commits to different repositories of XRay ARM port. The other 2 are:
1. https://reviews.llvm.org/D23932 (Clang test)
2. https://reviews.llvm.org/D23933 (compiler-rt)
Differential Revision: https://reviews.llvm.org/D23931
llvm-svn: 280888
The original commit was too aggressive about marking LibCalls as AAPCS. The
libcalls contain libc/libm/libunwind calls which are not AAPCS, but C.
llvm-svn: 280833
When branching to a block that immediately tail calls, it is possible to fold
the call directly into the branch if the call is direct and there is no stack
adjustment, saving one byte.
Example:
define void @f(i32 %x, i32 %y) {
entry:
%p = icmp eq i32 %x, %y
br i1 %p, label %bb1, label %bb2
bb1:
tail call void @foo()
ret void
bb2:
tail call void @bar()
ret void
}
before:
f:
movl 4(%esp), %eax
cmpl 8(%esp), %eax
jne .LBB0_2
jmp foo
.LBB0_2:
jmp bar
after:
f:
movl 4(%esp), %eax
cmpl 8(%esp), %eax
jne bar
.LBB0_1:
jmp foo
I don't expect any significant size savings from this (on a Clang bootstrap I
saw 288 bytes), but it does make the code a little tighter.
This patch only does 32-bit, but 64-bit would work similarly.
Differential Revision: https://reviews.llvm.org/D24108
llvm-svn: 280832
Summary:
Previously we were trying to represent this with the "contains" list of
the .cv_inline_linetable directive, which was not enough information.
Now we directly represent the chain of inlined call sites, so we know
what location to emit when we encounter a .cv_loc directive of an inner
inlined call site while emitting the line table of an outer function or
inlined call site. Fixes PR29146.
Also fixes PR29147, where we would crash when .cv_loc directives crossed
sections. Now we write down the section of the first .cv_loc directive,
and emit an error if any other .cv_loc directive for that function is in
a different section.
Also fixes issues with discontiguous inlined source locations, like in
this example:
volatile int unlikely_cond = 0;
extern void __declspec(noreturn) abort();
__forceinline void f() {
if (!unlikely_cond) abort();
}
int main() {
unlikely_cond = 0;
f();
unlikely_cond = 0;
}
Previously our tables gave bad location information for the 'abort'
call, and the debugger wouldn't snow the inlined stack frame for 'f'.
It is important to emit good line tables for this code pattern, because
it comes up whenever an asan bug occurs in an inlined function. The
__asan_report* stubs are generally placed after the normal function
epilogue, leading to discontiguous regions of inlined code.
Reviewers: majnemer, amccarth
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D24014
llvm-svn: 280822
I might have called this "r246507, the sequel". It fixes the same issue, as the
issue has cropped up in a few more places. The underlying problem is that
isSetCCEquivalent can pick up select_cc nodes with a result type that is not
legal for a setcc node to have, and if we use that type to create new setcc
nodes, nothing fixes that (and so we've violated the contract that the
infrastructure has with the backend regarding setcc node types).
Fixes PR30276.
For convenience, here's the commit message from r246507, which explains the
problem is greater detail:
[DAGCombine] Fixup SETCC legality checking
SETCC is one of those special node types for which operation actions (legality,
etc.) is keyed off of an operand type, not the node's value type. This makes
sense because the value type of a legal SETCC node is determined by its
operands' value type (via the TLI function getSetCCResultType). When the
SDAGBuilder creates SETCC nodes, it either creates them with an MVT::i1 value
type, or directly with the value type provided by TLI.getSetCCResultType.
The first problem being fixed here is that DAGCombine had several places
querying TLI.isOperationLegal on SETCC, but providing the return of
getSetCCResultType, instead of the operand type directly. This does not mean
what the author thought, and "luckily", most in-tree targets have SETCC with
Custom lowering, instead of marking them Legal, so these checks return false
anyway.
The second problem being fixed here is that two of the DAGCombines could create
SETCC nodes with arbitrary (integer) value types; specifically, those that
would simplify:
(setcc a, b, op1) and|or (setcc a, b, op2) -> setcc a, b, op3
(which is possible for some combinations of (op1, op2))
If the operands of the and|or node are actual setcc nodes, then this is not an
issue (because the and|or must share the same type), but, the relevant code in
DAGCombiner::visitANDLike and DAGCombiner::visitORLike actually calls
DAGCombiner::isSetCCEquivalent on each operand, and that function will
recognise setcc-like select_cc nodes with other return types. And, thus, when
creating new SETCC nodes, we need to be careful to respect the value-type
constraint. This is even true before type legalization, because it is quite
possible for the SELECT_CC node to have a legal type that does not happen to
match the corresponding TLI.getSetCCResultType type.
To be explicit, there is nothing that later fixes the value types of SETCC
nodes (if the type is legal, but does not happen to match
TLI.getSetCCResultType). Creating SETCCs with an MVT::i1 value type seems to
work only because, either MVT::i1 is not legal, or it is what
TLI.getSetCCResultType returns if it is legal. Fixing that is a larger change,
however. For the time being, restrict the relevant transformations to produce
only SETCC nodes with a value type matching TLI.getSetCCResultType (or MVT::i1
prior to type legalization).
Fixes PR24636.
llvm-svn: 280767
If we are extracting a subvector that has just been inserted then we should just use the original inserted subvector.
This has come up in certain several x86 shuffle lowering cases where we are crossing 128-bit lanes.
Differential Revision: https://reviews.llvm.org/D24254
llvm-svn: 280715
Summary:
In addition to not including the register operand of the current
instruction also don't include any aliasing registers. We can't consider
these as candidates because using them will clobber the corresponding
register operand of the current instruction.
This change doesn't include a test case and it would probably be difficult
to produce a stable one since the bug depends on the results of register
allocation.
Reviewers: MatzeB, qcolombet, hfinkel
Subscribers: hfinkel, llvm-commits
Differential Revision: https://reviews.llvm.org/D24130
llvm-svn: 280698
All of the builtins are designed to be invoked with ARM AAPCS CC even on ARM
AAPCS VFP CC hosts. Tweak the default initialisation to ARM AAPCS CC rather
than C CC for ARM/thumb targets.
The changes to the tests are necessary to ensure that the calling convention for
the lowered library calls are honoured. Furthermore, these adjustments cause
certain branch invocations to change to branch-and-link since the returned value
needs to be moved across registers (d0 -> r0, r1).
llvm-svn: 280683
CGP currently drops select's MD_prof profile data when
generating conditional branch which can lead to bad
code layout. The patch fixes the issue.
Differential Revision: http://reviews.llvm.org/D24169
llvm-svn: 280600
Delete the dead code for Write(ilist_iterator) in the IR Verifier,
inline report(ilist_iterator) at its call sites in the MachineVerifier,
and use simple_ilist<>::iterator in SymbolTableListTraits.
The only remaining reference to ilist_iterator outside of the ilist
implementation is from MachineInstrBundleIterator. I'll get rid of that
in a follow-up.
llvm-svn: 280565
Subregister definitions are considered uses for the purpose of tracking
liveness of the whole register. At the same time, when calculating live
interval subranges, subregister defs should not be treated as uses.
Differential Revision: https://reviews.llvm.org/D24190
llvm-svn: 280532
One side of a diamond may end with a predicate clobbering instruction.
That side of the diamond has to be if-converted second. Both sides can't
clobber the predicate or the ifconversion is invalid. This is checked
elsewhere, but add an assert as a safety check. NFC
llvm-svn: 280518
For the store of a wide value merged from a pair of values, especially int-fp pair,
sometimes it is more efficent to split it into separate narrow stores, which can
remove the bitwise instructions or sink them to colder places.
Now the feature is only enabled on x86 target, and only store of int-fp pair is
splitted. It is possible that the application scope gets extended with perf evidence
support in the future.
Differential Revision: https://reviews.llvm.org/D22840
llvm-svn: 280505
This fixes a regression introduced by revision 268094.
Revision 268094 added the following dag combine rule:
// trunc (shl x, K) -> shl (trunc x), K => K < vt.size / 2
That rule converts a truncate of a shift-by-constant into a shift of a truncated
value. We do this only if the shift count is less than half the size in bits of
the truncated value (K < vt.size / 2).
The problem is that the constraint on the shift count is incorrect, so the rule
doesn't work well in some cases involving vector types. The combine rule should
have been written instead like this:
// trunc (shl x, K) -> shl (trunc x), K => K < vt.getScalarSizeInBits()
Basically, if K is smaller than the "scalar size in bits" of the truncated value
then we know that by "sinking" the truncate into the operand of the shift we
would never accidentally make the shift undefined.
This patch fixes the check on the shift count, and adds test cases to make sure
that we don't regress the behavior.
Differential Revision: https://reviews.llvm.org/D24154
llvm-svn: 280482
If the entire blocks match, we would count the branch instructions
toward the number of duplicated instructions. This doesn't match what we
do elsewhere, and was causing a bug.
llvm-svn: 280448
When expanding a SETCC for which the low half is known to evaluate to false,
we can only throw it away for LT/GT comparisons, not LE/GE.
This fixes PR29170.
Differential Revision: https://reviews.llvm.org/D24151
llvm-svn: 280424
Prior to this, we could generate a vector_shuffle from an IR shuffle when the
size of the result was exactly the sum of the sizes of the input vectors.
If the output vector was narrower - e.g. a <12 x i8> being formed by a shuffle
with two <8 x i8> inputs - we would lower the shuffle to a sequence of extracts
and inserts.
Instead, we can form a larger vector_shuffle, and then extract a subvector
of the right size - e.g. shuffle the two <8 x i8> inputs into a <16 x i8>
and then extract a <12 x i8>.
This also includes a target-specific X86 combine that in the presence of
AVX2 combines:
(vector_shuffle <mask> (concat_vectors t1, undef)
(concat_vectors t2, undef))
into:
(vector_shuffle <mask> (concat_vectors t1, t2), undef)
in cases where this allows us to form VPERMD/VPERMQ.
(This is not a separate commit, as that pattern does not appear without
the DAGBuilder change.)
llvm-svn: 280418
They're another source of generic vregs, which are going to need a type on the
definition when we remove the register width from MachineRegisterInfo.
llvm-svn: 280412
Legalization tends to create anyext(trunc) patterns. This should always be
combined - into either a single trunc, a single ext, or nothing if the
types match exactly. But if we happen to combine the trunc first, we may pull
the trunc away from the anyext or make it implicit (e.g. the truncate(extract)
-> extract(bitcast) fold).
To prevent this, we can avoid doing the fold, similarly to how we already handle
fpround(fpextend).
Differential Revision: https://reviews.llvm.org/D23893
llvm-svn: 280386
LLVM has an @llvm.eh.dwarf.cfa intrinsic, used to lower the GCC-compatible
__builtin_dwarf_cfa() builtin. As pointed out in PR26761, this is currently
broken on PowerPC (and likely on ARM as well). Currently, @llvm.eh.dwarf.cfa is
lowered using:
ADD(FRAMEADDR, FRAME_TO_ARGS_OFFSET)
where FRAME_TO_ARGS_OFFSET defaults to the constant zero. On x86,
FRAME_TO_ARGS_OFFSET is lowered to 2*SlotSize. This setup, however, does not
work for PowerPC. Because of the way that the stack layout works, the canonical
frame address is not exactly (FRAMEADDR + FRAME_TO_ARGS_OFFSET) on PowerPC
(there is a lower save-area offset as well), so it is not just a matter of
implementing FRAME_TO_ARGS_OFFSET for PowerPC (unless we redefine its
semantics -- We can do that, since it is currently used only for
@llvm.eh.dwarf.cfa lowering, but the better to directly lower the CFA construct
itself (since it can be easily represented as a fixed-offset FrameIndex)). Mips
currently does this, but by using a custom lowering for ADD that specifically
recognizes the (FRAMEADDR, FRAME_TO_ARGS_OFFSET) pattern.
This change introduces a ISD::EH_DWARF_CFA node, which by default expands using
the existing logic, but can be directly lowered by the target. Mips is updated
to use this method (which simplifies its implementation, and I suspect makes it
more robust), and updates PowerPC to do the same.
Fixes PR26761.
Differential Revision: https://reviews.llvm.org/D24038
llvm-svn: 280350
As discussed in https://reviews.llvm.org/D22666, our current mechanism to
support -pg profiling, where we insert calls to mcount(), or some similar
function, is fundamentally broken. We insert these calls in the frontend, which
means they get duplicated when inlining, and so the accumulated execution
counts for the inlined-into functions are wrong.
Because we don't want the presence of these functions to affect optimizaton,
they should be inserted in the backend. Here's a pass which would do just that.
The knowledge of the name of the counting function lives in the frontend, so
we're passing it here as a function attribute. Clang will be updated to use
this mechanism.
Differential Revision: https://reviews.llvm.org/D22825
llvm-svn: 280347
Summary:
This change promotes the 'isTailCall(...)' member function to
TargetInstrInfo as a query interface for determining on a per-target
basis whether a given MachineInstr is a tail call instruction. We build
upon this in the XRay instrumentation pass to emit special sleds for
tail call optimisations, where we emit the correct kind of sled.
The tail call sleds look like a mix between the function entry and
function exit sleds. Form-wise, the sled comes before the "jmp"
instruction that implements the tail call similar to how we do it for
the function entry sled. Functionally, because we know this is a tail
call, it behaves much like an exit sled -- i.e. at runtime we may use
the exit trampolines instead of a different kind of trampoline.
A follow-up change to recognise these sleds will be done in compiler-rt,
so that we can start intercepting these initially as exits, but also
have the option to have different log entries to more accurately reflect
that this is actually a tail call.
Reviewers: echristo, rSerge, majnemer
Subscribers: mehdi_amini, dberris, llvm-commits
Differential Revision: https://reviews.llvm.org/D23986
llvm-svn: 280334
This reverts commit r280268, it causes all MSVC 2013 to ICE. This
appears to have been fixed in a later MSVC 2013 update, because I cannot
reproduce it locally. That said, all upstream LLVM bots are broken right
now, so I am reverting.
Also reverts dependent change r280275, "[Hexagon] Deal with undefs when
extending live intervals".
llvm-svn: 280301
More preparation for dropping source types from MachineInstrs: regsters coming
out of already-selected code (i.e. non-generic instructions) don't have a type,
but that information is needed so we must add it manually.
This is done via a new G_TYPE instruction.
llvm-svn: 280292
The shape of the vtable is passed down as the size of the
__vtbl_ptr_type. This special pointer type appears both as the pointee
type of the vptr type, and by itself in every dynamic class. For classes
with multiple vtables, only the shape of the primary vftable is
included, as the shape of all secondary vftables will be the same as in
the base class.
Fixes PR28150
llvm-svn: 280254
This is a first step towards supporting deopt value lowering and reporting entirely with the register allocator. I hope to build on this in the near future to support live-on-return semantics, but I have a use case which allows me to test and investigate code quality with just the live-in semantics so I've chosen to start there. For those curious, my use cases is our implementation of the "__llvm_deoptimize" function we bind to @llvm.deoptimize. I'm choosing not to hard code that fact in the patch and instead make it configurable via function attributes.
The basic approach here is modelled on what is done for the "Live In" values on stackmaps and patchpoints. (A secondary goal here is to remove one of the last barriers to merging the pseudo instructions.) We start by adding the operands directly to the STATEPOINT SDNode. Once we've lowered to MI, we extend the remat logic used by the register allocator to fold virtual register uses into StackMap::Indirect entries as needed. This does rely on the fact that the register allocator rematerializes. If it didn't along some code path, we could end up with more vregs than physical registers and fail to allocate.
Today, we *only* fold in the register allocator. This can create some weird effects when combined with arguments passed on the stack because we don't fold them appropriately. I have an idea how to fix that, but it needs this patch in place to work on that effectively. (There's some weird interaction with the scheduler as well, more investigation needed.)
My near term plan is to land this patch off-by-default, experiment in my local tree to identify any correctness issues and then start fixing codegen problems one by one as I find them. Once I have the live-in lowering fully working (both correctness and code quality), I'm hoping to move on to the live-on-return semantics. Note: I don't have any *known* miscompiles with this patch enabled, but I'm pretty sure I'll find at least a couple. Thus, the "experimental" tag and the fact it's off by default.
Differential Revision: https://reviews.llvm.org/D24000
llvm-svn: 280250
As written, the code should assert if this lookup would have ever
succeeded. Without looking through composite types, the type graph
should be acyclic.
llvm-svn: 280168
Legalization ends up creating many G_SEQUENCE/G_EXTRACT pairs which leads to
inefficient codegen (even for -O0), so add a quick pass over the function to
remove them again.
llvm-svn: 280155
We're intending to move to a world where the type of a register is determined
by its (unique) def. This is incompatible with physregs, which are untyped.
It also means the other passes don't have to worry quite so much about
register-class compatibility and inserting COPYs appropriately.
llvm-svn: 280132
Many lists want to override only allocation semantics, or callbacks for
iplist. Split these up to prevent code duplication.
- Specialize ilist_alloc_traits to change the implementations of
deleteNode() and createNode().
- One common desire is to do nothing deleteNode() and disable
createNode(). Specialize ilist_alloc_traits to inherit from
ilist_noalloc_traits for that behaviour.
- Specialize ilist_callback_traits to use the addNodeToList(),
removeNodeFromList(), and transferNodesFromList() callbacks.
As a drive-by, add some coverage to the callback-related unit tests.
llvm-svn: 280128
The existing code hard-coded a limit of 20 instructions for duplication
when a block ended with an indirect branch. Extract this as an option.
No functional change intended.
llvm-svn: 280125
Guarantee that ilist_traits<T>::transferNodesFromList is only called
when nodes are actually changing lists.
I also moved all the callbacks to occur *first*, before the operation.
This is the only choice for iplist<T>::merge, so we might as well be
consistent. I expect this to have no effect in practice, although it
simplifies the logic in both iplist<T>::transfer and iplist<T>::insert.
llvm-svn: 280122
Reverse iterators to doubly-linked lists can be simpler (and cheaper)
than std::reverse_iterator. Make it so.
In particular, change ilist<T>::reverse_iterator so that it is *never*
invalidated unless the node it references is deleted. This matches the
guarantees of ilist<T>::iterator.
(Note: MachineBasicBlock::iterator is *not* an ilist iterator, but a
MachineInstrBundleIterator<MachineInstr>. This commit does not change
MachineBasicBlock::reverse_iterator, but it does update
MachineBasicBlock::reverse_instr_iterator. See note at end of commit
message for details on bundle iterators.)
Given the list (with the Sentinel showing twice for simplicity):
[Sentinel] <-> A <-> B <-> [Sentinel]
the following is now true:
1. begin() represents A.
2. begin() holds the pointer for A.
3. end() represents [Sentinel].
4. end() holds the poitner for [Sentinel].
5. rbegin() represents B.
6. rbegin() holds the pointer for B.
7. rend() represents [Sentinel].
8. rend() holds the pointer for [Sentinel].
The changes are #6 and #8. Here are some properties from the old
scheme (which used std::reverse_iterator):
- rbegin() held the pointer for [Sentinel] and rend() held the pointer
for A;
- operator*() cost two dereferences instead of one;
- converting from a valid iterator to its valid reverse_iterator
involved a confusing increment; and
- "RI++->erase()" left RI invalid. The unintuitive replacement was
"RI->erase(), RE = end()".
With vector-like data structures these properties are hard to avoid
(since past-the-beginning is not a valid pointer), and don't impose a
real cost (since there's still only one dereference, and all iterators
are invalidated on erase). But with lists, this was a poor design.
Specifically, the following code (which obviously works with normal
iterators) now works with ilist::reverse_iterator as well:
for (auto RI = L.rbegin(), RE = L.rend(); RI != RE;)
fooThatMightRemoveArgFromList(*RI++);
Converting between iterator and reverse_iterator for the same node uses
the getReverse() function.
reverse_iterator iterator::getReverse();
iterator reverse_iterator::getReverse();
Why doesn't iterator <=> reverse_iterator conversion use constructors?
In order to catch and update old code, reverse_iterator does not even
have an explicit conversion from iterator. It wouldn't be safe because
there would be no reasonable way to catch all the bugs from the changed
semantic (see the changes at call sites that are part of this patch).
Old code used this API:
std::reverse_iterator::reverse_iterator(iterator);
iterator std::reverse_iterator::base();
Here's how to update from old code to new (that incorporates the
semantic change), assuming I is an ilist<>::iterator and RI is an
ilist<>::reverse_iterator:
[Old] ==> [New]
reverse_iterator(I) (--I).getReverse()
reverse_iterator(I) ++I.getReverse()
--reverse_iterator(I) I.getReverse()
reverse_iterator(++I) I.getReverse()
RI.base() (--RI).getReverse()
RI.base() ++RI.getReverse()
--RI.base() RI.getReverse()
(++RI).base() RI.getReverse()
delete &*RI, RE = end() delete &*RI++
RI->erase(), RE = end() RI++->erase()
=======================================
Note: bundle iterators are out of scope
=======================================
MachineBasicBlock::iterator, also known as
MachineInstrBundleIterator<MachineInstr>, is a wrapper to represent
MachineInstr bundles. The idea is that each operator++ takes you to the
beginning of the next bundle. Implementing a sane reverse iterator for
this is harder than ilist. Here are the options:
- Use std::reverse_iterator<MBB::i>. Store a handle to the beginning of
the next bundle. A call to operator*() runs a loop (usually
operator--() will be called 1 time, for unbundled instructions).
Increment/decrement just works. This is the status quo.
- Store a handle to the final node in the bundle. A call to operator*()
still runs a loop, but it iterates one time fewer (usually
operator--() will be called 0 times, for unbundled instructions).
Increment/decrement just works.
- Make the ilist_sentinel<MachineInstr> *always* store that it's the
sentinel (instead of just in asserts mode). Then the bundle iterator
can sniff the sentinel bit in operator++().
I initially tried implementing the end() option as part of this commit,
but updating iterator/reverse_iterator conversion call sites was
error-prone. I have a WIP series of patches that implements the final
option.
llvm-svn: 280032
Instead of putting all possible requests into a single table, we can perform
the extremely dense lookup based on opcode and type-index in constant time
using multi-dimensional array-like things.
This roughly halves the time spent doing legalization, which was dominated by
queries against the Actions table.
llvm-svn: 280011
There should be no functional change here, I'm just making the implementation
of "frem" (to libcall) legalization easier for a followup.
llvm-svn: 279987
This bug shows up with diamonds that share unpredicable, unanalyzable branches.
There's an included test case from Hexagon. What was happening was that we were
attempting to predicate the branch instruction despite the fact that it was
checked to be the same. Now for unanalyzable branches we skip over the branch
instructions when predicating the block.
Differential Revision: https://reviews.llvm.org/D23939
llvm-svn: 279985
Assuming the default FP env, we should not treat fdiv and frem any differently in terms of
trapping behavior than any other FP op. Ie, FP ops do not trap with the default FP env.
This matches how we treat these ops in IR with isSafeToSpeculativelyExecute(). There's a
similar bug in Constant::canTrap().
This bug manifests in PR29114:
https://llvm.org/bugs/show_bug.cgi?id=29114
...as a sequence of scalar divisions instead of a vector division on x86 for a <3 x float>
type.
Differential Revision: https://reviews.llvm.org/D23974
llvm-svn: 279970
MRI::getMaxLaneMaskForVReg does not always cover the whole register.
For example, on X86 the upper 16 bits of EAX cannot be accessed via
any subregister. Consequently, there is no lane mask that only covers
that part of EAX. The getMaxLaneMaskForVReg will return the union of
the lane masks for all subregisters, and in case of EAX, that union
will not cover the upper 16 bits.
This fixes https://llvm.org/bugs/show_bug.cgi?id=29132
llvm-svn: 279969
The problem occurs when the Node doesn't updated in place , UpdateNodeOperation() return the node that already exist.
In this case assert fail in PromoteIntegerOperand() , N have 2 results ( val + chain).
Differential Revision: http://reviews.llvm.org/D23756
llvm-svn: 279961
When global-isel fails on a MachineFunction MF, MF will be cleaned up
and given to SDISel.
Thanks to this fallback, we can already perform correctness test even if
we support only a small portion of the functions in a test.
llvm-svn: 279891
This is used to communicate that the instruction selection pipeline
failed at some point.
Another way to achieve that would be to have some kind of conditional
scheduling in the PassManager, such that we only schedule a pass based
on the success/failure of another one. The property approach has the
advantage of being lightweight and solve the problem at stake.
llvm-svn: 279885
By default, this hook tells GlobalISel to abort (report a fatal error)
when it encounters an error. The alternative will be to fall back on
SDISel.
This fall back will be removed when the bring-up of GlobalISel is over.
llvm-svn: 279879
This method allows to reset the state of a MachineFunction as if it was
just created. This will be used during the bring-up of GlobalISel to
provide a way to fallback on SelectionDAG. That way, we can start doing
correctness testing even if we are not able to select all functions via
the global instruction selector.
llvm-svn: 279876
MCContext already has many tasks, and separating CodeView out from it is
probably a good idea. The .cv_loc tracking was modelled on the DWARF
tracking which lived directly in MCContext.
Removes the inclusion of MCCodeView.h from MCContext.h, so now there are
only 10 build actions while I hack on CodeView support instead of 265.
llvm-svn: 279847
It's unclear how the old
%res(32) = G_ICMP { s32, s32 } intpred(eq), %0, %1
is actually different from an s1 verison
%res(1) = G_ICMP { s1, s32 } intpred(eq), %0, %1
so we'll remove it for now.
llvm-svn: 279843
This was for some reason skipping operands that are subregisters
instead of keeping the same subregister index.
v_movreld_b32 expects src0 to be the subregister of the tied
super register use/def.
e.g.
v_movreld_b32 v0, v9, <imp-def, tied3> v[0:3], <imp-use, tied2> v[0:3]
was being replaced with
v[4:7] = copy v[0:3]
v_movreld_b32 v0, v9, <imp-def, tied3> v[4:7], <imp-use, tied2> v[4:7],
which really writes to v[0:3]
llvm-svn: 279804
MMI must match the function passed, and MF has a handle on MMI. Use that instead
of accepting it as separate argument. No Functional Change.
llvm-svn: 279701
Save the function in the class, and then don't pass it around. This reduces the
number of parameters and makes calls to member functions simpler.
No Functional Change.
llvm-svn: 279700
Rename AllVRegsAllocated to NoVRegs. This avoids the connotation of
running after register and simply describes that no vregs are used in
a machine function. With that we can simply compute the property and do
not need to dump/parse it in .mir files.
Differential Revision: http://reviews.llvm.org/D23850
llvm-svn: 279698
This patch changes LLVM_CONSTEXPR variable declarations to const
variable declarations, since LLVM_CONSTEXPR expands to nothing if the
current compiler doesn't support constexpr. In all of the changed
cases, it looks like the code intended the variable to be const instead
of sometimes-constexpr sometimes-not.
llvm-svn: 279696
tracksSubRegLiveness only depends on the Subtarget and a cl::opt, there
is not need to change it or save/parse it in a .mir file.
Make the field const and move the initialization LiveIntervalAnalysis to the
MachineRegisterInfo constructor. Also cleanup some code and fix some
instances which better use MachineRegisterInfo::subRegLivenessEnabled() instead
of TargetSubtargetInfo::enableSubRegLiveness().
llvm-svn: 279676
The cost of predicating a diamond is only the instructions that are not shared
between the two branches. Additionally If a predicate clobbering instruction
occurs in the shared portion of the branches (e.g. a cond move), it may still
be possible to if convert the sub-cfg. This change handles these two facts by
rescanning the non-shared portion of a diamond sub-cfg to recalculate both the
predication cost and whether both blocks are pred-clobbering.
Fixed 2 bugs before recommitting. Branch instructions must be compared and found
identical before diamond conversion. Also, predicate-clobbering instructions in
the shared prefix disqualifies a potential diamond conversion. Includes tests
for both.
llvm-svn: 279670
In cases where .dwo/.dwp files are guaranteed to be available, skipping
the extra online (in the .o file) inline info can save a substantial
amount of space - see the original r221306 for more details there.
llvm-svn: 279650
The register allocator can split a live interval of a register into a set
of smaller intervals. After the allocation of registers is complete, the
rewriter will modify the IR to replace virtual registers with the corres-
ponding physical registers. At this stage, if a register corresponding
to a subregister of a virtual register is used, the rewriter will check
if that subregister is undefined, and if so, it will add the <undef> flag
to the machine operand. The function verifying liveness of the subregis-
ter would assume that it is undefined, unless any of the subranges of the
live interval proves otherwise.
The problem is that the live intervals created during splitting do not
have any subranges, even if the original parent interval did. This could
result in the <undef> flag placed on a register that is actually defined.
Differential Revision: http://reviews.llvm.org/D21189
llvm-svn: 279625
We should not consider subregister definitions as reads for schedule
model purposes (they are just modeled as reads of the overal vreg for
liveness calculation purposes, the CPU instructions are not actually
reading).
Unfortunately I cannot submit a test for this as it requires a target
which uses ReadAdvance annotation in the scheduling model and has
subregister liveness enabled at the same time, which is only the case on
an out of tree target.
llvm-svn: 279604
Re-apply this patch, hopefully I will get away without any warnings
in the constructor now.
This patch removes the MachineFunctionAnalysis. Instead we keep a
map from IR Function to MachineFunction in the MachineModuleInfo.
This allows the insertion of ModulePasses into the codegen pipeline
without breaking it because the MachineFunctionAnalysis gets dropped
before a module pass.
Peak memory should stay unchanged without a ModulePass in the codegen
pipeline: Previously the MachineFunction was freed at the end of a codegen
function pipeline because the MachineFunctionAnalysis was dropped; With
this patch the MachineFunction is freed after the AsmPrinter has
finished.
Differential Revision: http://reviews.llvm.org/D23736
llvm-svn: 279602
Specifying isSSA is an extra line at best and results in invalid MI at
worst. Compute the value instead.
Differential Revision: http://reviews.llvm.org/D22722
llvm-svn: 279600
Change this pass constructor to just accept a const TargetMachine * and
use INITIALIZE_TM_PASS, that way we can get rid of the dummy
constructor. The pass will still fail when calling the default
constructor leading to TM == nullptr, this is no different than before
but is more in line what other codegen passes are doing and avoids the
dummy constructor.
llvm-svn: 279598
since 2015 (n4387), though it's allowed by a library DR so new implementations
accept it in their C++11 modes...
This should unbreak the build with libstdc++ 4.9.
llvm-svn: 279583
I want to compute the SSA property of .mir files automatically in
upcoming patches. The problem with this is that some inputs will be
reported as static single assignment with some passes claiming not to
support SSA form. In reality though those passes do not support PHI
instructions => Track the presence of PHI instructions separate from the
SSA property.
Differential Revision: https://reviews.llvm.org/D22719
llvm-svn: 279573
They really should have both types represented, but early variants were created
before MachineInstrs could have multiple types so they're rather ambiguous.
llvm-svn: 279567
Re-apply this commit with the deletion of a MachineFunction delegated to
a separate pass to avoid use after free when doing this directly in
AsmPrinter.
This patch removes the MachineFunctionAnalysis. Instead we keep a
map from IR Function to MachineFunction in the MachineModuleInfo.
This allows the insertion of ModulePasses into the codegen pipeline
without breaking it because the MachineFunctionAnalysis gets dropped
before a module pass.
Peak memory should stay unchanged without a ModulePass in the codegen
pipeline: Previously the MachineFunction was freed at the end of a codegen
function pipeline because the MachineFunctionAnalysis was dropped; With
this patch the MachineFunction is freed after the AsmPrinter has
finished.
Differential Revision: http://reviews.llvm.org/D23736
llvm-svn: 279564
Instructions like G_ICMP have multiple types that may need to be legalized (the
boolean output and nearly arbitrary inputs in this case). So the legalizer must
be capable of deciding what to do for each of them separately.
llvm-svn: 279554
Summary:
This greatly simplifies our handling of SDNode::SubclassData.
NFC, hopefully. :)
See discussion in D23035 for discussion about the design API of these
bitfields.
Reviewers: chandlerc
Subscribers: llvm-commits, rnk
Differential Revision: https://reviews.llvm.org/D23036
llvm-svn: 279537
That commit added a new version of Intrinsic::getName which should only
be called when the intrinsic has no overloaded types. There are several
debugging paths, such as SDNode::dump which are printing the name of the
intrinsic but don't have the overloaded types. These paths should be ok
to just print the name instead of crashing.
The fix here is ultimately to just add a 'None' second argument as that
calls the overload capable getName, which is less efficient, but this is a
debugging path anyway, and not perf critical.
Thanks to Björn Pettersson for pointing out that there were more crashes.
llvm-svn: 279528
This patch removes the MachineFunctionAnalysis. Instead we keep a
map from IR Function to MachineFunction in the MachineModuleInfo.
This allows the insertion of ModulePasses into the codegen pipeline
without breaking it because the MachineFunctionAnalysis gets dropped
before a module pass.
Peak memory should stay unchanged without a ModulePass in the codegen
pipeline: Previously the MachineFunction was freed at the end of a codegen
function pipeline because the MachineFunctionAnalysis was dropped; With
this patch the MachineFunction is freed after the AsmPrinter has
finished.
Differential Revision: http://reviews.llvm.org/D23736
llvm-svn: 279502
The assert in r279466 checks that we call the correct version of
Intrinsic::getName. The version which accepts only an ID should not
be used for intrinsics with overloaded types. The global-isel
code was calling the wrong version. The test CodeGen/AArch64/GlobalISel/arm64-irtranslator.ll
will ensure that we call the correct version from now on.
llvm-svn: 279487
__guard_local is defined as long on OpenBSD. If the source file contains
a definition of __guard_local, it mismatches with the int8 pointer type
used in LLVM. In that case, Module::getOrInsertGlobal() returns a
cast operation instead of a GlobalVariable. Trying to set the
visibility on the cast operation leads to random segfaults (seen when
compiling the OpenBSD kernel, which also runs with stack protection).
In the kernel, the hidden attribute does not matter. For userspace code,
__guard_local is defined as hidden in the startup code. If a program
re-defines __guard_local, the definition from the startup code will
either win or the linker complains about multiple definitions
(depending on whether the re-defined __guard_local is placed in the
common segment or not).
It also matches what gcc on OpenBSD does.
Thanks Stefan Kempf <sisnkemp@gmail.com> for the patch!
Differential Revision: http://reviews.llvm.org/D23674
llvm-svn: 279449
- Always compile print() regardless of LLVM_ENABLE_DUMP. (We usually
only gard dump() functions with that).
- Only show the set properties to reduce output clutter.
- Remove the unused variant that even shows the unset properties.
- Fix comments
llvm-svn: 279338
Currently nodes_iterator may dereference to a NodeType* or a NodeType&. Make them all dereference to NodeType*, which is NodeRef later.
Differential Revision: https://reviews.llvm.org/D23704
Differential Revision: https://reviews.llvm.org/D23705
llvm-svn: 279326
This adds a G_INSERT instruction, which technically makes G_SEQUENCE redundant
(it's equivalent to a G_INSERT into an IMPLICIT_DEF). We'll leave G_SEQUENCE
for now though: it's likely to be far more common as it's a fundamental part of
legalization, so avoiding the mess and bloat of the extra IMPLICIT_DEFs is
probably worthwhile.
llvm-svn: 279306
Summary: This way they can be re-used by target-specific schedulers.
Reviewers: atrick, MatzeB, kparzysz
Subscribers: kparzysz, llvm-commits, MatzeB
Differential Revision: https://reviews.llvm.org/D23678
llvm-svn: 279305
First, make sure all types involved are represented, rather than being implicit
from the register width.
Second, canonicalize all types to scalar. These operations just act in bits and
don't care about vectors.
Also standardize spelling of Indices in the MachineIRBuilder (NFC here).
llvm-svn: 279294
Unsigned addition and subtraction can reuse the instructions created to
legalize large width operations (i.e. both produce and consume a carry flag).
Signed operations and multiplies get a dedicated op-with-overflow instruction.
Once this is produced the two values are combined into a struct register (which
will almost always be merged with a corresponding G_EXTRACT as part of
legalization).
llvm-svn: 279278
The heuristic above this code is incredibly suspect, but disregarding that it mutates the cast opcode so we need to check the *mutated* opcode later to see if we need to emit an AssertSext or AssertZext node.
Fixes PR29041.
llvm-svn: 279223
The ppc64 multistage bot fails on this.
This reverts commit r279124.
Also Revert "CodeGen: Add/Factor out LiveRegUnits class; NFCI" because it depends on the previous change
This reverts commit r279171.
llvm-svn: 279199
This is a set of register units intended to track register liveness, it
is similar in spirit to LivePhysRegs.
You can also think of this as the liveness tracking parts of the
RegisterScavenger factored out into an own class.
This was proposed in http://llvm.org/PR27609
Differential Revision: http://reviews.llvm.org/D21916
llvm-svn: 279171
The following function currently relies on tail-merging for if
conversion to succeed. The common tail of cond_true and cond_false is
extracted, and this then forms a diamond pattern that can be
successfully if converted.
If this block does not get extracted, either because tail-merging is
disabled or the threshold is higher, we should still recognize this
pattern and if-convert it.
Fixed a regression in the original commit. Need to un-reverse branches after
reversing them, or other conversions go awry.
Regression on self-hosting bots with no obvious explanation. Tidied up range
handling to be more obviously correct, but there was no smoking gun.
define i32 @t2(i32 %a, i32 %b) nounwind {
entry:
%tmp1434 = icmp eq i32 %a, %b ; <i1> [#uses=1]
br i1 %tmp1434, label %bb17, label %bb.outer
bb.outer: ; preds = %cond_false, %entry
%b_addr.021.0.ph = phi i32 [ %b, %entry ], [ %tmp10, %cond_false ]
%a_addr.026.0.ph = phi i32 [ %a, %entry ], [ %a_addr.026.0, %cond_false ]
br label %bb
bb: ; preds = %cond_true, %bb.outer
%indvar = phi i32 [ 0, %bb.outer ], [ %indvar.next, %cond_true ]
%tmp. = sub i32 0, %b_addr.021.0.ph
%tmp.40 = mul i32 %indvar, %tmp.
%a_addr.026.0 = add i32 %tmp.40, %a_addr.026.0.ph
%tmp3 = icmp sgt i32 %a_addr.026.0, %b_addr.021.0.ph
br i1 %tmp3, label %cond_true, label %cond_false
cond_true: ; preds = %bb
%tmp7 = sub i32 %a_addr.026.0, %b_addr.021.0.ph
%tmp1437 = icmp eq i32 %tmp7, %b_addr.021.0.ph
%indvar.next = add i32 %indvar, 1
br i1 %tmp1437, label %bb17, label %bb
cond_false: ; preds = %bb
%tmp10 = sub i32 %b_addr.021.0.ph, %a_addr.026.0
%tmp14 = icmp eq i32 %a_addr.026.0, %tmp10
br i1 %tmp14, label %bb17, label %bb.outer
bb17: ; preds = %cond_false, %cond_true, %entry
%a_addr.026.1 = phi i32 [ %a, %entry ], [ %tmp7, %cond_true ], [ %a_addr.026.0, %cond_false ]
ret i32 %a_addr.026.1
}
Without tail-merging or diamond-tail if conversion:
LBB1_1: @ %bb
@ =>This Inner Loop Header: Depth=1
cmp r0, r1
ble LBB1_3
@ BB#2: @ %cond_true
@ in Loop: Header=BB1_1 Depth=1
subs r0, r0, r1
cmp r1, r0
it ne
cmpne r0, r1
bgt LBB1_4
LBB1_3: @ %cond_false
@ in Loop: Header=BB1_1 Depth=1
subs r1, r1, r0
cmp r1, r0
bne LBB1_1
LBB1_4: @ %bb17
bx lr
With diamond-tail if conversion, but without tail-merging:
@ BB#0: @ %entry
cmp r0, r1
it eq
bxeq lr
LBB1_1: @ %bb
@ =>This Inner Loop Header: Depth=1
cmp r0, r1
ite le
suble r1, r1, r0
subgt r0, r0, r1
cmp r1, r0
bne LBB1_1
@ BB#2: @ %bb17
bx lr
llvm-svn: 279168
The cost of predicating a diamond is only the instructions that are not shared
between the two branches. Additionally If a predicate clobbering instruction
occurs in the shared portion of the branches (e.g. a cond move), it may still
be possible to if convert the sub-cfg. This change handles these two facts by
rescanning the non-shared portion of a diamond sub-cfg to recalculate both the
predication cost and whether both blocks are pred-clobbering.
llvm-svn: 279167
This may affect calculations for thresholds, but is not a significant change
in behavior.
The problem was that an inclusive range must have an additonal flag to showr
that it is empty, because otherwise begin == end implies that the range has one
element, and it may not be possible to move past on either side.
llvm-svn: 279166
Re-apply r276044 with off-by-1 instruction fix for the reload placement.
This is a variant of scavengeRegister() that works for
enterBasicBlockEnd()/backward(). The benefit of the backward mode is
that it is not affected by incomplete kill flags.
This patch also changes
PrologEpilogInserter::doScavengeFrameVirtualRegs() to use the register
scavenger in backwards mode.
Differential Revision: http://reviews.llvm.org/D21885
llvm-svn: 279124
This is prep work for allowing the threshold to be different during layout,
and to enforce a single threshold between merging and duplicating during
layout. No observable change intended.
llvm-svn: 279117
Summary:
This is a pretty trivial, but I thought it was worth just checking that nobody feels it's completely the wrong thing to be doing.
The motivation is that when starting a new backend, you often start with a minimal stub, pretty much just FooTargetMachine and FooTargetInfo. Once that's built, you might naturally try `llc -march=foo myinput.ll` and it seems more developer-friendly if this ends up asserting due to the lack of MCAsmInfo with an informative message rather than just segfaulting.
Reviewers: MatzeB, chandlerc
Subscribers: bogner, llvm-commits
Differential Revision: https://reviews.llvm.org/D23443
llvm-svn: 279061
This will allow tail duplication and tail merging during layout to have a
shared threshold to make sure that they don't overlap. No observable change
intended.
llvm-svn: 278981
Summary:
This is part of the "NodeType* -> NodeRef" migration. Notice that since
GraphWriter prints object address as identity, I added a static_assert on
NodeRef to be a pointer type.
Reviewers: dblaikie
Subscribers: llvm-commits, MatzeB
Differential Revision: https://reviews.llvm.org/D23580
llvm-svn: 278966
This is a fix for https://llvm.org/bugs/show_bug.cgi?id=29010
Root cause of the bug is that the register class of the machine instruction operand does not fully reflect if this registers that can be allocated.
Both for i386 and x86_64 the operand's register class is VR128RegClass and thus contains xmm0-xmm15, though in i386 we can only use xmm0-xmm8.
In order to get the actual allocable registers of the class we need to use RegisterClassInfo.
Differential Revision: https://reviews.llvm.org/D23613
llvm-svn: 278954
This is used to mark functions with the C++11 [[ noreturn ]] or C11 _Noreturn
attributes.
Patch by Victor Leschuk!
https://reviews.llvm.org/D23167
llvm-svn: 278940
In theory the indices of RC (and thus the index used for LiveRegs) may differ from the indices of OpRC.
Fixed the code to extract the correct RC index.
OpRC contains the first X consecutive elements of RC, and thus their indices are currently de facto the same, therefore a test cannot be added at this point.
Differential Revision: https://reviews.llvm.org/D23491
llvm-svn: 278923
This is a mechanical change of comments in switches like fallthrough,
fall-through, or fall-thru to use the LLVM_FALLTHROUGH macro instead.
llvm-svn: 278902
Also avoid some pointless use of auto! Because that's friendlier to
readers and avoids several types accidentally resolving to unnecessary
references here (MachineInstr *&, unsigned &).
llvm-svn: 278894
Rather than doing a funny dance that relies on dereferencing end() not
crashing, add some API to MachineInstrBundleIterator to get a non-const
version of the iterator.
llvm-svn: 278870
If AnalyzeBranch can't analyze a block and it is possible to
fallthrough, then duplicating the block doesn't make sense, as only one
block can be the layout predecessor for the un-analyzable fallthrough.
Submitted wit a test case, but NOTE: the test case doesn't currently
fail. However, the test case fails with D20505 and would have saved me
some time debugging.
llvm-svn: 278866
The current MachineBasicBlock might be the last block, so FallThru may
be past the end(). Use getNextNode(), which will convert to nullptr,
rather than &*++, which is invalid if we reach the end().
llvm-svn: 278858
Do not reorder and move up a loop latch block before a loop header
when optimising for size because this will generate an extra
unconditional branch.
Differential Revision: https://reviews.llvm.org/D22521
llvm-svn: 278840
The pipeliner was generating an invalid Phi name for an operand
in the epilog block, which caused an assert in the live variable
analysis pass. The fix is to the code that generates new Phis
in the epilog block. In this case, there is an existing Phi that
needs to be reused rather than creating a new Phi instruction.
Differential Revision: https://reviews.llvm.org/D23513
llvm-svn: 278805
Following the discussion on D22038, this refactors a PowerPC specific setcc -> srl(ctlz) transformation so it can be used by other targets.
Differential Revision: https://reviews.llvm.org/D23445
llvm-svn: 278799
in debug info using their stack slots instead of as an indirection of param reg + 0
offset. This is done by detecting FrameIndexSDNodes in SelectionDAG and generating
FrameIndexDbgValues for them. This ultimately generates DBG_VALUEs with stack
location operands.
Differential Revision: http://reviews.llvm.org/D23283
llvm-svn: 278703
This adds two new utility functions findLoopControlBlock and findLoopPreheader
to MachineLoop and MachineLoopInfo. These functions are refactored and taken
from the Hexagon target as they are target independent; thus this is intendend to
be a non-functional change.
Differential Revision: https://reviews.llvm.org/D22959
llvm-svn: 278661
Remove all ilist_iterator to pointer casts. There were two reasons for
casts:
- Checking for an uninitialized (i.e., null) iterator. I added
MachineInstrBundleIterator::isValid() to check for that case.
- Comparing an iterator against the underlying pointer value while
avoiding converting the pointer value to an iterator. This is
occasionally necessary in MachineInstrBundleIterator, since there is
an assertion in the constructors that the underlying MachineInstr is
not bundled (but we don't care about that if we're just checking for
pointer equality).
To support the latter case, I rewrote the == and != operators for
ilist_iterator and MachineInstrBundleIterator.
- The implicit constructors now use enable_if to exclude
const-iterator => non-const-iterator conversions from overload
resolution (previously it was a compiler error on instantiation, now
it's SFINAE).
- The == and != operators are now global (friends), and are not
templated.
- MachineInstrBundleIterator has overloads to compare against both
const_pointer and const_reference. This avoids the implicit
conversions to MachineInstrBundleIterator that assert, instead just
checking the address (and I added unit tests to confirm this).
Notably, the only remaining uses of ilist_iterator::getNodePtrUnchecked
are in ilist.h, and no code outside of ilist*.h directly relies on this
UB end-iterator-to-pointer conversion anymore. It's still needed for
ilist_*sentinel_traits, but I'll clean that up soon.
llvm-svn: 278478
To fix PR28014, this patch restricts tail merging to blocks that belong to the
same loop after MBP.
Differential Revision: https://reviews.llvm.org/D23191
llvm-svn: 278463
It's sharing the integer G_CONSTANT for now since I don't *think* it creates
any ambiguity (even on weird archs). If that turns out wrong we can create a
G_PTRCONSTANT or something.
llvm-svn: 278423
Check MachineInstr::isDebugValue for the same instruction as we're
calling isSchedBoundary, avoiding the possibility of dereferencing
end().
This is a functionality change even when I!=end(). Matthias had a look
and agrees this is the right resolution (as opposed to checking for
end()).
This is triggered by a huge number of tests, but they happen to
magically pass right now. I found this because WIP patches for PR26753
convert them into crashes.
llvm-svn: 278394
Summary: Some backends, like WebAssembly, use virtual registers instead of physical registers. This crashes the DbgValueHistoryCalculator pass, which assumes that all registers are physical. Instead, skip virtual registers when iterating aliases, and assume that they are clobbered.
Reviewers: dexonsmith, dschuff, aprantl
Subscribers: yurydelendik, llvm-commits, jfb, sunfish
Differential Revision: https://reviews.llvm.org/D22590
llvm-svn: 278371
After machine block placement, MBBs may not have terminators, and it is
appropriate to check for the end iterator here. We can fold the check
into the next if, as well. This look is really just looking for BBs that
end in CATCHRET.
llvm-svn: 278350
Check for an end iterator from MachineBasicBlock::getFirstTerminator in
llvm::getFuncletMembership. If this is turned into an assertion, it
fires in 48 X86 testcases (for example,
CodeGen/X86/regalloc-spill-at-ehpad.ll).
Since this is likely a latent bug (shouldn't all basic blocks end with a
terminator?) I've filed PR28938.
llvm-svn: 278344
This patch helps avoid false dependencies on undef registers by updating the machine instructions' undef operand to use a register that the instruction is truly dependent on, or use a register with clearance higher than Pref.
Pseudo example:
loop:
xmm0 = ...
xmm1 = vcvtsi2sdl eax, xmm0<undef>
... = inst xmm0
jmp loop
In this example, selecting xmm0 as the undef register creates false dependency between loop iterations.
This false dependency cannot be solved by inserting an xor before vcvtsi2sdl because xmm0 is alive at the point of the vcvtsi2sdl instruction.
Selecting a different register instead of xmm0, especially a register that is not used in the loop, will eliminate this problem.
Differential Revision: https://reviews.llvm.org/D22466
llvm-svn: 278321
It's more than just inttoptr, but the others can't be tested until we have
support for non-trivial constants (they currently get unavoidably folded to a
ConstantInt).
llvm-svn: 278303
If AnalyzeBranch can't analyze a block and it is possible to
fallthrough, then duplicating the block doesn't make sense, as only one
block can be the layout predecessor for the un-analyzable fallthrough.
Submitted wit a test case, but NOTE: the test case doesn't currently
fail. However, the test case fails with D20505 and would have saved me
some time debugging.
llvm-svn: 278288
Summary:
See the new test case for one that was (non-deterministically) crashing
on trunk and deterministically hit the assertion that I added in D23302.
Basically, the machine function contains a sequence
DS_WRITE_B32 %vreg4, %vreg14:sub0, ...
DS_WRITE_B32 %vreg4, %vreg14:sub0, ...
%vreg14:sub1<def> = COPY %vreg14:sub0
and SILoadStoreOptimizer::mergeWrite2Pair merges the two DS_WRITE_B32
instructions into one before calling repairIntervalsInRange.
Now repairIntervalsInRange wants to repair %vreg14, in particular, and
ends up trying to repair %vreg14:sub1 as well, but that only becomes
active _after_ the range that is to be repaired, hence the crash due
to LR.find(...) == LR.begin() at the start of repairOldRegInRange.
I believe that just skipping those subrange is fine, but again, not too
familiar with that code.
Reviewers: MatzeB, kparzysz, tstellarAMD
Subscribers: llvm-commits, MatzeB
Differential Revision: https://reviews.llvm.org/D23303
llvm-svn: 278268
This change makes it possible for tail-duplication and tail-merging to
be disjoint. By being less aggressive when merging during layout, there are no
overlapping cases between tail-duplication and tail-merging, provided the
thresholds are disjoint.
There is a remaining TODO to benchmark the succ_size() test for non-layout tail
merging.
llvm-svn: 278265
If the value produced by the bitcast hasn't been referenced yet, we can simply
reuse the input register avoiding an unnecessary COPY instruction.
llvm-svn: 278245
If the input vector to INSERT_SUBVECTOR is another INSERT_SUBVECTOR, and this inserted subvector replaces the last insertion, then insert into the common source vector.
i.e.
INSERT_SUBVECTOR( INSERT_SUBVECTOR( Vec, SubOld, Idx ), SubNew, Idx ) --> INSERT_SUBVECTOR( Vec, SubNew, Idx )
Differential Revision: https://reviews.llvm.org/D23330
llvm-svn: 278211
For now put them all in the entry block. This should be correct but may give
poor runtime performance. Hopefully MachineSinking combined with
isReMaterializable can solve those issues, but if not the interface is sound
enough to support alternatives.
llvm-svn: 278168
As detailed on D22726, much of the shift combining code assume constant values will fit into a uint64_t value and calls ConstantSDNode::getZExtValue where it probably shouldn't (leading to asserts). Using APInt directly avoids this problem but we encounter other assertions if we attempt to compare/operate on 2 APInt of different bitwidths.
This patch adds a helper function to ensure that 2 APInt values are zero extended as required so that they can be safely used together. I've only added an initial example use for this to the '(SHIFT (SHIFT x, c1), c2) --> (SHIFT x, (ADD c1, c2))' combines. Further cases can easily be added as required.
Differential Revision: https://reviews.llvm.org/D23007
llvm-svn: 278141
This reverts commit r278048. Something changed between the last time I
built this--it takes awhile on my ridiculously slow and ancient
computer--and now that broke this.
llvm-svn: 278053
Summary:
Based on two patches by Michael Mueller.
This is a target attribute that causes a function marked with it to be
emitted as "hotpatchable". This particular mechanism was originally
devised by Microsoft for patching their binaries (which they are
constantly updating to stay ahead of crackers, script kiddies, and other
ne'er-do-wells on the Internet), but is now commonly abused by Windows
programs to hook API functions.
This mechanism is target-specific. For x86, a two-byte no-op instruction
is emitted at the function's entry point; the entry point must be
immediately preceded by 64 (32-bit) or 128 (64-bit) bytes of padding.
This padding is where the patch code is written. The two byte no-op is
then overwritten with a short jump into this code. The no-op is usually
a `movl %edi, %edi` instruction; this is used as a magic value
indicating that this is a hotpatchable function.
Reviewers: majnemer, sanjoy, rnk
Subscribers: dberris, llvm-commits
Differential Revision: https://reviews.llvm.org/D19908
llvm-svn: 278048
ScanInstructions is now 2 functions:
AnalyzeBranches and ScanInstructions. ScanInstructions also now takes a
pair of arguments delimiting the instructions to be scanned. This will
be used for forked diamond support to re-scan only a portion of the
block.
llvm-svn: 277904
Until now, our use case for the visitor has been to take a stream of bytes
representing a type stream, deserialize the records in sequence, and do
something with them, where "something" is determined by how the user
implements a particular set of callbacks on an abstract class.
For actually writing PDBs, however, we want to do the reverse. We have
some kind of description of the list of records in their in-memory format,
and we want to process each one. Perhaps by serializing them to a byte
stream, or perhaps by converting them from one description format (Yaml)
to another (in-memory representation).
This was difficult in the current model because deserialization and
invoking the callbacks were tightly coupled.
With this patch we change this so that TypeDeserializer is itself an
implementation of the particular set of callbacks. This decouples
deserialization from the iteration over a list of records and invocation
of the callbacks. TypeDeserializer is initialized with another
implementation of the callback interface, so that upon deserialization it
can pass the deserialized record through to the next set of callbacks. In
a sense this is like an implementation of the Decorator design pattern,
where the Deserializer is a decorator.
This will be useful for writing Pdbs from yaml, where we have a
description of the type records in Yaml format. In this case, the visitor
implementation would have each visitation callback method implemented in
such a way as to extract the proper set of fields from the Yaml, and it
could maintain state that builds up a list of these records. Finally at
the end we can pass this information through to another set of callbacks
which serializes them into a byte stream.
Reviewed By: majnemer, ruiu, rnk
Differential Revision: https://reviews.llvm.org/D23177
llvm-svn: 277871
This differs from the previous version by being more careful about template
instantiation/specialization in order to prevent errors when building with
clang -Werror. Specifically:
* begin is not defined in the template and is instead instantiated when Head
is. I think the warning when we don't do that is wrong (PR28815) but for now
at least do it this way to avoid the warning.
* Instead of performing template specializations in LLVM_INSTANTIATE_REGISTRY
instead provide a template definition then do explicit instantiation. No
compiler I've tried has problems with doing it the other way, but strictly
speaking it's not permitted by the C++ standard so better safe than sorry.
Original commit message:
Currently the Registry class contains the vestiges of a previous attempt to
allow plugins to be used on Windows without using BUILD_SHARED_LIBS, where a
plugin would have its own copy of a registry and export it to be imported by
the tool that's loading the plugin. This only works if the plugin is entirely
self-contained with the only interface between the plugin and tool being the
registry, and in particular this conflicts with how IR pass plugins work.
This patch changes things so that instead the add_node function of the registry
is exported by the tool and then imported by the plugin, which solves this
problem and also means that instead of every plugin having to export every
registry they use instead LLVM only has to export the add_node functions. This
allows plugins that use a registry to work on Windows if
LLVM_EXPORT_SYMBOLS_FOR_PLUGINS is used.
llvm-svn: 277806
These are the operations that are trivially identical. Division is omitted for
now because you need to use the correct sign/zero extension.
llvm-svn: 277775
On modern Intel processors hardware SQRT in many cases is faster than RSQRT
followed by Newton-Raphson refinement. The patch introduces a simple heuristic
to choose between hardware SQRT instruction and Newton-Raphson software
estimation.
The patch treats scalars and vectors differently. The heuristic is that for
scalars the compiler should optimize for latency while for vectors it should
optimize for throughput. It is based on the assumption that throughput bound
code is likely to be vectorized.
Basically, the patch disables scalar NR for big cores and disables NR completely
for Skylake. Firstly, scalar SQRT has shorter latency than NR code in big cores.
Secondly, vector SQRT has been greatly improved in Skylake and has better
throughput compared to NR.
Differential Revision: https://reviews.llvm.org/D21379
llvm-svn: 277725
rewriteOperands() always performed liveness queries at the base index
rather than the RegSlot/Base as apropriate for the machine operand. This
could lead to illegal rewriting in some cases.
llvm-svn: 277661
When expanding FP constants, we attempt to shrink doubles to floats and perform an extending load.
However, on SystemZ, and possibly on other targets (I've only confirmed the problem on SystemZ), the FP extending load instruction may convert SNaN into QNaN, or may cause an exception. So in the general case, we would still like to shrink FP constants, but SNaNs should be left as doubles.
Differential Revision: https://reviews.llvm.org/D22685
llvm-svn: 277602
IfConversion used to always add the undef flag when adding a use operand
on a newly predicated instruction. This would be an operand for the register
being conditionally redefined. Due to the undef flag, the liveness of this
register prior to the predicated instruction would get lost.
This patch changes this so that such use operands are added only when the
register is live, without the undef flag.
This was reverted but pushed again now, for details follow link below.
Reviewed by Quentin Colombet.
http://reviews.llvm.org/D209077
llvm-svn: 277571
None of GlobalISel requires the property, but this lets us use the
verifier instead of rolling our own "all instructions selected" check.
llvm-svn: 277484
After instruction selection, there should be no pre-isel generic
instructions remaining, nor should generic virtual registers be
used. Verify that.
llvm-svn: 277483
Selected: the InstructionSelect pass ran and all pre-isel generic
instructions have been eliminated; i.e., all instructions are now
target-specific or non-pre-isel generic instructions (e.g., COPY).
Since only pre-isel generic instructions can have generic virtual register
operands, this also means that all generic virtual registers have been
constrained to virtual registers (assigned to register classes) and that
all sizes attached to them have been eliminated.
This lets us enforce certain invariants across passes.
This property is GlobalISel-specific, but is always available.
llvm-svn: 277482
RegBankSelected: the RegBankSelect pass ran and all generic virtual
registers have been assigned to a register bank.
This lets us enforce certain invariants across passes.
This property is GlobalISel-specific, but is always available.
llvm-svn: 277475
RegBankSelect and InstructionSelect run after the legalizer and
require a Legalized function: check that all instructions are legal.
Note that this should be in the MachineVerifier, but it can't use the
MachineLegalizer as it's currently in the separate GlobalISel library.
Note that the RegBankSelect verifier checks have the same layering
problem, but we only use inline methods so end up not needing to link
against the GlobalISel library.
llvm-svn: 277472
Legalized: The MachineLegalizer ran; all pre-isel generic instructions
have been legalized, i.e., all instructions are now one of:
- generic and always legal (e.g., COPY)
- target-specific
- legal pre-isel generic instructions.
This lets us enforce certain invariants across passes.
This property is GlobalISel-specific, but is always available.
llvm-svn: 277470
This is only used for debug prints, but the previous hardcoded ", "
caused it to be printed unnecessarily when OnlySet, and is annoying
when adding new properties.
llvm-svn: 277465
Added ability to estimate the entry count of the extracted function and
the branch probabilities of the exit branches.
Patch by River Riddle!
Differential Revision: https://reviews.llvm.org/D22744
llvm-svn: 277411
We used to combine "sext(setcc x, y, cc) -> (select (setcc x, y, cc), -1, 0)"
Instead, we should combine to (select (setcc x, y, cc), T, 0) where the value
of T is 1 or -1, depending on the type of the setcc, and getBooleanContents()
for the type if it is not i1.
This fixes PR28504.
llvm-svn: 277371
Added ability to estimate the entry count of the extracted function and
the branch probabilities of the exit branches.
Patch by River Riddle!
Differential Revision: https://reviews.llvm.org/D22744
llvm-svn: 277313
Summary:
When performing cmp for EQ/NE and the operand is sign extended, we can
avoid the truncaton if the bits to be tested are no less than origianl
bits.
Reviewers: eli.friedman
Subscribers: eli.friedman, aemerson, nemanjai, t.p.northover, llvm-commits
Differential Revision: https://reviews.llvm.org/D22933
llvm-svn: 277252
These come in two variants for now: G_INTRINSIC and G_INTRINSIC_W_SIDE_EFFECTS.
We may decide to split the latter up with finer-grained restrictions later, if
necessary.
llvm-svn: 277224
Previously this change was submitted from a Windows machine, so
changes made to the case of filenames and directory names did
not survive the commit, and as a result the CMake source file
names and the on-disk file names did not match on case-sensitive
file systems.
I'm resubmitting this patch from a Linux system, which hopefully
allows the case changes to make it through unfettered.
llvm-svn: 277213
In a previous patch, it was suggested to use all caps instead of
rolling caps for initialisms, so this patch changes everything
to do this.
llvm-svn: 277190
Patch by Sunita Marathe
Third try, now following fixes to MSan to handle mempcy in such a way that this commit won't break the MSan buildbots. (Thanks, Evegenii!)
llvm-svn: 277189
The following pattern was being layed out poorly:
A
/ \
B C
/ \ / \
D E ? (Doesn't matter)
Where A->B is far more likely than A->C, and prob(B->D) = prob(B->E)
The current algorithm gives:
A,B,C,E (D goes on worklist)
It does this even if C has a frequency count of 0. This patch
adjusts the layout calculation so that if freq(B->E) >> freq(C->E)
then we go ahead and layout E rather than C. Fallthrough half the time
is better than fallthrough never, or fallthrough very rarely. The
resulting layout is:
A,B,E, (C and D are in a worklist)
llvm-svn: 277187
For MachineInstrBuilder, having to manually use RegState::Define is ugly and
makes register definitions clunkier than they need to be, so this adds two
convenience functions: addDef and addUse.
For MachineIRBuilder, we want to avoid BuildMI's first-reg-is-def rule because
it's hidden away and causes bugs. So this patch switches buildInstr to
returning a MachineInstrBuilder and adding *all* operands via addDef/addUse.
NFC.
llvm-svn: 277176
Mostly straightforward as we ignore addressing modes and just
use the base + unsigned immediate offset (always 0) variants.
This currently fails to select extloads because we have yet to
agree on a representation.
llvm-svn: 277171
Software pipelining is an optimization for improving ILP by
overlapping loop iterations. Swing Modulo Scheduling (SMS) is
an implementation of software pipelining that attempts to
reduce register pressure and generate efficient pipelines with
a low compile-time cost.
This implementaion of SMS is a target-independent back-end pass.
When enabled, the pass should run just prior to the register
allocation pass, while the machine IR is in SSA form. If the pass
is successful, then the original loop is replaced by the optimized
loop. The optimized loop contains one or more prolog blocks, the
pipelined kernel, and one or more epilog blocks.
This pass is enabled for Hexagon only. To enable for other targets,
a couple of target specific hooks must be implemented, and the
pass needs to be called from the target's TargetMachine
implementation.
Differential Review: http://reviews.llvm.org/D16829
llvm-svn: 277169
[DAG] Check debug values for invalidation before transferring and mark
old debug values invalid when transferring to another SDValue.
This fixes PR28613.
Reviewers: jyknight, hans, dblaikie, echristo
Subscribers: yaron.keren, ismail, llvm-commits
Differential Revision: https://reviews.llvm.org/D22858
llvm-svn: 277135
A ConstantVector can have ConstantExpr operands and vice versa.
However, the folder had no ability to fold ConstantVectors which, in
some cases, was an optimization barrier.
Instead, rephrase the folder in terms of Constants instead of
ConstantExprs and teach callers how to deal with failure.
llvm-svn: 277099
This broke some out-of-tree AMDGPU tests that relied on the old behavior
wherein isIntrinsic() would return true for any function that starts
with "llvm.". And in general that change will not play nicely with
out-of-tree backends.
llvm-svn: 277087
LLT() has a particular meaning: it's one invalid type. But we really
want selected instructions to have no type whatsoever.
Also verify that types don't linger after ISel, and enable the verifier
on the AArch64 select test.
llvm-svn: 277001
This version has two fixes compared to the original:
* In Registry.h the template static members are instantiated before they are
used, as clang gives an error if you do it the other way around.
* The use of the Registry template in clang-tidy is updated in the same way as
has been done everywhere else.
Original commit message:
Currently the Registry class contains the vestiges of a previous attempt to
allow plugins to be used on Windows without using BUILD_SHARED_LIBS, where a
plugin would have its own copy of a registry and export it to be imported by
the tool that's loading the plugin. This only works if the plugin is entirely
self-contained with the only interface between the plugin and tool being the
registry, and in particular this conflicts with how IR pass plugins work.
This patch changes things so that instead the add_node function of the registry
is exported by the tool and then imported by the plugin, which solves this
problem and also means that instead of every plugin having to export every
registry they use instead LLVM only has to export the add_node functions. This
allows plugins that use a registry to work on Windows if
LLVM_EXPORT_SYMBOLS_FOR_PLUGINS is used.
llvm-svn: 276973
Summary:
getName() involves a hashtable lookup, so is expensive given how
frequently isIntrinsic() is called. (In particular, many users cast to
IntrinsicInstr or one of its subclasses before calling
getIntrinsicID().)
This has an incidental functional change: Before, isIntrinsic() would
return true for any function whose name started with "llvm.", even if it
wasn't properly an intrinsic. The new behavior seems more correct to
me, because it's strange to say that isIntrinsic() is true, but
getIntrinsicId() returns "not an intrinsic".
Some callers want the old behavior -- they want to know whether the
caller is a recognized intrinsic, or might be one in some other version
of LLVM. For them, we added Function::hasLLVMReservedName(), which
checks whether the name starts with "llvm.".
This change is good for a 1.5% e2e speedup compiling a large Eigen
benchmark.
Reviewers: bogner
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D22065
llvm-svn: 276942
Factor out countDuplicatedInstructions to Count duplicated instructions at the
beginning and end of a diamond pattern. This is in prep for adding support for
diamonds that need to be tail-merged.
llvm-svn: 276910
TargetOptions wants the ExceptionHandling enum. Move that to
MCTargetOptions.h to avoid transitively including Dwarf.h everywhere in
clang. Now you can add a DWARF tag without a full rebuild of clang
semantic analysis.
llvm-svn: 276883
Currently the Registry class contains the vestiges of a previous attempt to
allow plugins to be used on Windows without using BUILD_SHARED_LIBS, where a
plugin would have its own copy of a registry and export it to be imported by
the tool that's loading the plugin. This only works if the plugin is entirely
self-contained with the only interface between the plugin and tool being the
registry, and in particular this conflicts with how IR pass plugins work.
This patch changes things so that instead the add_node function of the registry
is exported by the tool and then imported by the plugin, which solves this
problem and also means that instead of every plugin having to export every
registry they use instead LLVM only has to export the add_node functions. This
allows plugins that use a registry to work on Windows if
LLVM_EXPORT_SYMBOLS_FOR_PLUGINS is used.
Differential Revision: http://reviews.llvm.org/D21385
llvm-svn: 276856
Using getZExtValue() will assert if the value doesn't fit into uint64_t - SHL was already doing this, I've just updated ASHR/LSHR to match
As mentioned on D22726
llvm-svn: 276855
Change the syntax to use `%0.sub8` to denote a subregister.
This seems like a more natural fit to denote subregisters; I also plan
to introduce a new ":classname" syntax in upcoming patches to denote the
register class of a vreg.
Note that this commit disallows plain identifiers to start with a '.'
character. This shouldn't affect anything as external names/IR
references are all prefixed with '$'/'%', plain identifiers are only
used for instruction names, register mask names and subreg indexes.
Differential Revision: https://reviews.llvm.org/D22390
llvm-svn: 276815
In an instruction like:
CFI_INSTRUCTION .cfi_def_cfa ...
we can drop the '.cfi_' prefix since that should be obvious by the
context:
CFI_INSTRUCTION def_cfa ...
While being a terser and cleaner syntax this also prepares to dropping
support for identifiers starting with a dot character so we can use it
for expressions.
Differential Revision: http://reviews.llvm.org/D22388
llvm-svn: 276785
Instead of an ad-hoc collection of "buildInstr" functions with varying numbers
of registers, this uses variadic templates to provide for as many regs as
needed!
Also make IRtranslator use new "buildBr" function instead of some weird generic
one that no-one else would really use.
llvm-svn: 276762
If we move a last-use register read to a later position we may skip
intermediate segments. This may require us to not only extend the
segment before the NewIdx, but also extend the segment live-in to
OldIdx.
This switches LiveIntervalTest to use AMDGPU so we can test subregister
liveness.
llvm-svn: 276724
This adds LLVM's 3 main cast instructions (inttoptr, ptrtoint, bitcast) to the
IRTranslator. The first two are direct translations (with 2 MachineInstr types
each). Since LLT discards information, a bitcast might become trivial and we
emit a COPY in those cases instead.
llvm-svn: 276690
Some targets, notably AArch64 for ILP32, have different relocation encodings
based upon the ABI. This is an enabling change, so a future patch can use the
ABIName from MCTargetOptions to chose which relocations to use. Tested using
check-llvm.
The corresponding change to clang is in: http://reviews.llvm.org/D16538
Patch by: Joel Jones
Differential Revision: https://reviews.llvm.org/D16213
llvm-svn: 276654
This adds the actual MachineLegalizeHelper to do the work and a trivial pass
wrapper that legalizes all instructions in a MachineFunction. Currently the
only transformation supported is splitting up a vector G_ADD into one acting on
smaller vectors.
llvm-svn: 276461
This provides a better layering of responsibilities among different
aspects of PDB writing code. Some of the MSF related code was
contained in CodeView, and some was in PDB prior to this. Further,
we were often saying PDB when we meant MSF, and the two are
actually independent of each other since in theory you can have
other types of data besides PDB data in an MSF. So, this patch
separates the MSF specific code into its own library, with no
dependencies on anything else, and DebugInfoCodeView and
DebugInfoPDB take dependencies on DebugInfoMsf.
llvm-svn: 276458
An extension of D19978, this patch replaces the default BITREVERSE evaluation of individual bit masks+shifts with block mask+shifts when we have integer elements of power-of-2 bits in size.
After calling BSWAP to reverse the order of the constituent bytes (which typically follows a similar approach), every neighbouring 4-bits, 2-bits and finally 1-bit pairs are masked off and swapped over with shifts.
In doing so we can significantly reduce the number of operations required.
Differential Revision: https://reviews.llvm.org/D21578
llvm-svn: 276432
When we failed to parse a function in the mir parser, we should abort
the whole compilation instead of continuing in a weird state. Indeed,
this was creating strange machine function passes failures that were
hard to understand, until we notice that the function actually did not
get parsed correctly!
llvm-svn: 276348
The clearance calculation did not take into account registers defined as outputs or clobbers in inline assembly machine instructions because these register defs are implicit.
Differential Revision: http://reviews.llvm.org/D22580
llvm-svn: 276266
This patch fixes a very subtle bug in regmask calculation. Thanks to zan
jyu Wong <zyfwong@gmail.com> for bringing this to notice.
For example if CL is only clobbered than CH should not be marked
clobbered but CX, RCX and ECX should be mark clobbered. Previously for
each modified register all of its aliases are marked clobbered by
markRegClobbred() in RegUsageInfoCollector.cpp but that is wrong because
when CL is clobbered then MRI::isPhysRegModified() will return true for
CL, CX, ECX, RCX which is correct behavior but then for CX, EXC, RCX we
mark CH also clobbered as CH is aliased to CX,ECX,RCX so
markRegClobbred() is not required because isPhysRegModified already take
cares of proper aliasing register. A very simple test case has been
added to verify this change.
Please find relevant bug report here :
http://llvm.org/PR28567
Patch by Vivek Pandya <vivekvpandya@gmail.com>
Differential Revision: https://reviews.llvm.org/D22400
llvm-svn: 276235
This should be all the low-level instruction selection needs to determine how
to implement an operation, with the remaining context taken from the opcode
(e.g. G_ADD vs G_FADD) or other flags not based on type (e.g. fast-math).
llvm-svn: 276158
Reverting this commit for now as it seems to be causing failures on
test-suite tests on the clang-ppc64le-linux-lnt bot.
This reverts commit r276044.
llvm-svn: 276068
Add a check that the layout predecessor of a block is an actual CFG
predecssor of the block as well. No current code fails this check, but
upcoming patches can trigger this, and it makes sense to separate it
out.
llvm-svn: 276066
canTailDuplicate accepts two blocks and returns true if the first can be
duplicated into the second successfully. Use this function to
encapsulate the heuristic.
llvm-svn: 276062
This is a variant of scavengeRegister() that works for
enterBasicBlockEnd()/backward(). The benefit of the backward mode is
that it is not affected by incomplete kill flags.
This patch also changes
PrologEpilogInserter::doScavengeFrameVirtualRegs() to use the register
scavenger in backwards mode.
Differential Revision: http://reviews.llvm.org/D21885
llvm-svn: 276044
This adds two pieces:
- RegisterScavenger:::enterBasicBlockEnd() which behaves similar to
enterBasicBlock() but starts tracking at the end of the basic block.
- A RegisterScavenger::backward() method. It is subtly different
from the existing unprocess() method which only considers uses with
the kill flag set: If a value is dead at the end of a basic block with
a last use inside the basic block, unprocess() will fail to mark it as
live. However we cannot change/fix this behaviour because unprocess()
needs to perform the exact reverse operation of forward().
Differential Revision: http://reviews.llvm.org/D21873
llvm-svn: 276043
Also verify that we never try to set the size of a vreg associated
to a register class.
Report an error when we encounter that in MIR. Fix a testcase that
hit that error and had a size for no reason.
llvm-svn: 276012
The following condition expression ( a >> n) & 1 is converted to "bt a, n" instruction. It works on all intel targets.
But on AVX-512 it was broken because the expression is modified to (truncate (a >>n) to i1).
I added the new sequence (truncate (a >>n) to i1) to the BT pattern.
Differential Revision: https://reviews.llvm.org/D22354
llvm-svn: 275950
Elsewhere (particularly computeKnownBits) we assume that a global will be
aligned to the value returned by Value::getPointerAlignment. This is used to
boost the alignment on memcpy/memset, so any target-specific request can only
increase that value.
llvm-svn: 275866
DAGTypeLegalizer::CanSkipSoftenFloatOperand should allow
SELECT op code for x86_64 fp128 type for MME targets,
so SoftenFloatOperand does not abort on SELECT op code.
Differential Revision: http://reviews.llvm.org/D21758
llvm-svn: 275818
When SelectionDAGISel transforms a node representing an inline asm
block, memory constraint information is not preserved. This can cause
constraints to be broken when a memory offset is of the form:
offset + frame index
when the frame is resolved.
By propagating the constraints all the way to the backend, targets can
enforce memory operands of inline assembly to conform to their constraints.
For MIPSR6, some instructions had their offsets reduced to 9 bits from
16 bits such as ll/sc. This becomes problematic when using inline assembly
to perform atomic operations, as an offset can generated that is too big to
encode in the instruction.
Reviewers: dsanders, vkalintris
Differential Review: https://reviews.llvm.org/D21615
llvm-svn: 275786
Previously, we would expand:
%BL<def> = COPY %DL<kill>, %EBX<imp-use,kill>, %EBX<imp-def>
Into:
%BL<def> = MOV8rr %DL<kill>, %EBX<imp-def>
Dropping the imp-use on the floor.
That confused CriticalAntiDepBreaker, which (correctly) assumes that if an
instruction defs but doesn't use a register, that register is dead immediately
before the instruction - while in this case, the high lanes of EBX can be very
much alive.
This fixes PR28560.
Differential Revision: https://reviews.llvm.org/D22425
llvm-svn: 275634
Remove unnecessary clutter in assembly output. When using SjLj EH, the CFI is
not actually used for anything. Do not emit the CFI needlessly. The minor test
adjustments are interesting. The prologue test was just overzealous matcching.
The interesting case is the LSDA change. It was originally added to ensure that
various compilations did not mangle the name (it explicitly checked the name!).
However, subsequent cleanups made it more reliant on the CFI to find the name.
Parse the generated code flow to generically find the label still.
llvm-svn: 275614
Summary:
Instead, we take a single flags arg (a bitset).
Also add a default 0 alignment, and change the order of arguments so the
alignment comes before the flags.
This greatly simplifies many callsites, and fixes a bug in
AMDGPUISelLowering, wherein the order of the args to getLoad was
inverted. It also greatly simplifies the process of adding another flag
to getLoad.
Reviewers: chandlerc, tstellarAMD
Subscribers: jholewinski, arsenm, jyknight, dsanders, nemanjai, llvm-commits
Differential Revision: http://reviews.llvm.org/D22249
llvm-svn: 275592
Summary:
Previously we took an unsigned.
Hooray for type-safety.
Reviewers: chandlerc
Subscribers: dsanders, llvm-commits
Differential Revision: http://reviews.llvm.org/D22282
llvm-svn: 275591
For a fully inlined call chain like a -> b -> c -> d, we were emitting
line info for 'd' 3 separate times: once for d's actual InlineSite line
table, and twice for 'b' and 'c'. This is particularly inefficient when
all these functions are in different headers, because now we need to
encode the file change. Windbg was coping with our suboptimal output, so
this should not be noticeable from the debugger.
llvm-svn: 275502
Summary:
Make the target-specific flags in MachineMemOperand::Flags real, bona
fide enum values. This simplifies users, prevents various constants
from going out of sync, and avoids the false sense of security provided
by declaring static members in classes and then forgetting to define
them inside of cpp files.
Reviewers: MatzeB
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D22372
llvm-svn: 275451
Summary:
- Give it a shorter name (because we're going to refer to it often from
SelectionDAG and friends).
- Split the flags and alignment into separate variables.
- Specialize FlagsEnumTraits for it, so we can do bitwise ops on it
without losing type information.
- Make some enum values constants in MachineMemOperand instead.
MOMaxBits should not be a valid Flag.
- Simplify some of the bitwise ops for dealing with Flags.
Reviewers: chandlerc
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D22281
llvm-svn: 275438
Summary:
In this patch we implement the following parts of XRay:
- Supporting a function attribute named 'function-instrument' which currently only supports 'xray-always'. We should be able to use this attribute for other instrumentation approaches.
- Supporting a function attribute named 'xray-instruction-threshold' used to determine whether a function is instrumented with a minimum number of instructions (IR instruction counts).
- X86-specific nop sleds as described in the white paper.
- A machine function pass that adds the different instrumentation marker instructions at a very late stage.
- A way of identifying which return opcode is considered "normal" for each architecture.
There are some caveats here:
1) We don't handle PATCHABLE_RET in platforms other than x86_64 yet -- this means if IR used PATCHABLE_RET directly instead of a normal ret, instruction lowering for that platform might do the wrong thing. We think this should be handled at instruction selection time to by default be unpacked for platforms where XRay is not availble yet.
2) The generated section for X86 is different from what is described from the white paper for the sole reason that LLVM allows us to do this neatly. We're taking the opportunity to deviate from the white paper from this perspective to allow us to get richer information from the runtime library.
Reviewers: sanjoy, eugenis, kcc, pcc, echristo, rnk
Subscribers: niravd, majnemer, atrick, rnk, emaste, bmakam, mcrosier, mehdi_amini, llvm-commits
Differential Revision: http://reviews.llvm.org/D19904
llvm-svn: 275367
Avoid exposing a cl::opt in a public header and instead promote this
option in the API.
Alternatively, we could land the cl::opt in CommandFlags.h so that
it is available to every tool, but we would still have to find an
option for clang.
llvm-svn: 275348
IPRA try to optimize caller saved register by propagating register
usage information from callee to caller so it is beneficial to have
caller saved registers compare to callee saved registers when IPRA
is enabled. Please find more detailed explanation here
https://groups.google.com/d/msg/llvm-dev/XRzGhJ9wtZg/tjAJqb0eEgAJ.
This change makes local function do not have any callee preserved
register when IPRA is enabled. A simple test case is also added to
verify this change.
Patch by Vivek Pandya <vivekvpandya@gmail.com>
Differential Revision: http://reviews.llvm.org/D21561
llvm-svn: 275347
Code cleanup: Move references to SlotMapping and SourceMgr into the
PerFunctionMIParsingState to avoid unnecessary passing around in
parameters.
llvm-svn: 275342
Summary:
Previously it would say we had an invariant load if any of the memory
operands were invariant. But the load should be invariant only if *all*
the memory operands are invariant.
No testcase because this has proven to be very difficult to tickle in
practice. As just one example, ARM's ldrd instruction, which loads 64
bits into two 32-bit regs, is theoretically affected by this. But when
it's produced, it loses its memoperands' invariance bits!
Reviewers: jfb
Subscribers: llvm-commits, aemerson
Differential Revision: http://reviews.llvm.org/D22318
llvm-svn: 275331
Code cleanup: The PerFunctionMIParsingState is per function, moving a
reference into PFS we can avoid passing around the MachineFunction in an
extra parameter most of the time.
Also change most signatures to consistently pass PFS reference first.
llvm-svn: 275329
Currently the MIR framework prints all its outputs (errors and actual
representation) on stderr.
This patch fixes that by printing the regular output in the output
specified with -o.
Differential Revision: http://reviews.llvm.org/D22251
llvm-svn: 275314
We can freeze the registers after the MachineFrameInfo has been configured (by
telling it about calls, inline asm, ...). This doesn't happen at all yet, but
will be part of IR translation.
Fixes -verify-machineinstrs assertion.
llvm-svn: 275221
Use LivePhysRegs with a backwards walking algorithm to update live in
lists, this way the results do not depend on the presence of kill flags
anymore.
This patch also reduces the number of registers added as live-in.
Previously all pristine registers as well as all sub registers of a
super register were added resulting in unnecessarily large live in
lists. This fixed https://llvm.org/PR25263.
Differential Revision: http://reviews.llvm.org/D22027
llvm-svn: 275201
Added support for:
1. Multi dimension array.
2. Array of structure type, which previously was declared incompletely.
3. Dynamic size array.
4. Array where element type is a typedef, volatile or constant (this should resolve PR28311).
Differential Revision: http://reviews.llvm.org/D21526
llvm-svn: 275167
Blocks to be tail-merged may share more than one successor. Correct the
comment to state that they share a specific successor, SuccBB, rather
than a single successor, which is not true.
llvm-svn: 275104
Preserve assembly comments from input in output assembly and flags to
toggle property. This is on by default for inline assembly and off in
llvm-mc.
Parsed comments are emitted immediately before an EOL which generally
places them on the expected line.
Reviewers: rtrieu, dwmw2, rnk, majnemer
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D20020
llvm-svn: 275058
Drive-by improvement: We would 1) add CSRs, 2) remove callee saved CSRs
and 3) add all CSRs again for the return block. Just adding CSRs once
obviously gives the same results.
llvm-svn: 274955
An identity COPY like this:
%AL = COPY %AL, %EAX<imp-def>
has no semantic effect, but encodes liveness information: Further users
of %EAX only depend on this instruction even though it does not define
the full register.
Replace the COPY with a KILL instruction in those cases to maintain this
liveness information. (This reverts a small part of r238588 but this
time adds a comment explaining why a KILL instruction is useful).
llvm-svn: 274952
Because isReallyTriviallyReMaterializableGeneric puts many limits on
rematerializable instructions, this fix can prevent instructions with
tied virtual operands and instructions with virtual register uses from
being kept in DeadRemat, so as to workaround the live interval consistency
problem for the dummy instructions kept in DeadRemat.
But we still need to fix the live interval consistency problem. This patch
is just a short time relieve. PR28464 has been filed as a reminder.
Differential Revision: http://reviews.llvm.org/D19486
llvm-svn: 274928
Mostly through preferring MachineInstr&, avoid implicit conversions from
iterator to pointer.
Although this may bitrot (since there are other uses blocking me from
removing the implicit operator), this removes the last of the implicit
conversions from MachineInstrBundleIterator to MachineInstr* in the
LLVMCodeGen build target.
llvm-svn: 274893
The createRegAllocPass reads and writes to a global variable 'Registry'
via calls to getDefault and setDefault. Run this under a call_once to
avoid races.
llvm-svn: 274875
As a result, the urem instruction will not be expanded to a sequence of umull,
lsrs, muls and sub instructions, but just a call to __aeabi_uidivmod.
Differential Revision: http://reviews.llvm.org/D22131
llvm-svn: 274843
findScratchNonCalleeSaveRegister() just needs a simple liveness
analysis, use LivePhysRegs for that as it is simpler and does not depend
on the kill flags.
This commit adds a convenience function available() to LivePhysRegs:
This function returns true if the given register is not reserved and
neither the register nor any of its aliases are alive.
Differential Revision: http://reviews.llvm.org/D21865
llvm-svn: 274685
Now with a corrected test to account for a recently supported properties bit in the debug info of a struct.
Original review: http://reviews.llvm.org/D21939
This reverts commit 970c3fd497a28d25dd69526eb52594a696c37968.
llvm-svn: 274661
This logic was introduced in r157663 and does not make any sense to me.
The motivating example in rdar://11538365 looks like this:
This is the tail:
BB#16: derived from LLVM BB %if.end68
Live Ins: %R0 %R4 %R5
Predecessors according to CFG: BB#15 BB#5
tBLXi pred:14, pred:%noreg, <ga:@CFRelease>, %R0<kill>, <regmask>, %LR<imp-def,dead>, %SP<imp-use>, %SP<imp-def>
t2B <BB#20>, pred:14, pred:%noreg
Successors according to CFG: BB#20
This is the predBB:
BB#5:
Live Ins: %R5
Predecessors according to CFG: BB#4
%R4<def> = t2MOVi 0, pred:14, pred:%noreg, opt:%noreg
t2B <BB#16>, pred:14, pred:%noreg
Successors according to CFG: BB#16
However this is invalid machine code to begin with, if %R0 is live-in to
BB#16 then it must be live-in to BB#5 as well if BB#5 does not define
it. We should not need logic to retroactively fix broken machine code
and in fact the example from r157663 passes cleanly with the code
removed and I do not see any (newly) failing tests with the machine
verifier enabled.
Differential Revision: http://reviews.llvm.org/D22031
llvm-svn: 274655
Summary:
findBetterNeighborChains may or may not find a better chain for each node it finds, which include the node ("St") that visitSTORE is currently processing. If no better chain is found for St, visitSTORE should continue instead of return SDValue(St, 0), as if it's CombinedTo'ed.
This fixes bug 28130. There might be other ways to make the test pass (see D21409). I think both of the patches are fixing actual bugs revealed by the same testcase.
Reviewers: echristo, wschmidt, hfinkel, kbarton, amehsan, arsenm, nemanjai, bogner
Subscribers: mehdi_amini, nemanjai, llvm-commits
Differential Revision: http://reviews.llvm.org/D21692
llvm-svn: 274644
StratifiedSets (as implemented) is very fast, but its accuracy is also
limited. If we take a more aggressive andersens-like approach, we can be
way more accurate, but we'll also end up being slower.
So, we've decided to split CFLAA into CFLSteensAA and CFLAndersAA.
Long-term, we want to end up in a place where CFLSteens is queried
first; if it can provide an answer, great (since queries are basically
map lookups). Otherwise, we'll fall back to CFLAnders, BasicAA, etc.
This patch splits everything out so we can try to do something like
that when we get a reasonable CFLAnders implementation.
Patch by Jia Chen.
Differential Revision: http://reviews.llvm.org/D21910
llvm-svn: 274589
This reverts commit r259387 because it inserts illegal code after legalization
in some backends where i64 OR type is illegal for example.
llvm-svn: 274573
We can now handle concatenation of each source multiple times. The previous code just checked for each source to appear once in either order.
This also now handles an entire source vector sized piece having undef indices correctly. We now concat with UNDEF instead of using one of the sources. This is responsible for the test case change.
llvm-svn: 274483
After the block placement, if a block ends with a conditional branch, but the
next block is not its successor. The conditional branch should be changed to
unconditional branch. This patch fixes PR28307, PR28297, PR28402.
Differential Revision: http://reviews.llvm.org/D21811
llvm-svn: 274470
Given something like:
struct S {
int a;
struct { int b; };
};
We would fail to give 'b' offset 4. Instead, we would give it the
offset it has inside of it's struct.
llvm-svn: 274400
A namespace without a name should be written out as `anonymous
namespace' while a tag type without a name should be written out as
<unnamed-tag>.
llvm-svn: 274399
MSVC makes up names for these anonymous structs, but we don't (yet).
Eventually Clang should use getTypedefNameForAnonDecl() to put some name
in the debug info, and we can update the test case when that happens.
llvm-svn: 274391
We were asserting that our type records were valid when emitting
assembly, but not when emitting an object file.
I've been seeing lots of LNK1285 errors (corrupt PDB) during incremental
debug self-host builds with the MSVC linker, and hopefully this will
catch some of them earlier.
llvm-svn: 274373
Use MachineInstr& to avoid implicit conversions from
MachineBasicBlock::iterator to MachineInstr*. In one case, this could
use a range-based for loop, but the other loops iterated in reverse
order.
One of the reverse-loops checked the MachineInstr* for nullptr, a
condition that is provably unreachable. (And even if my proof has a
flaw, UBSan would catch the bug.)
llvm-svn: 274360
Use MachineInstr& instead of MachineInstr* in RegAllocFast to avoid
implicit conversions from MachineInstrBundleIterator. RAFast::spillAll
and RAFast::spillVirtReg still take iterators, since their argument may
be an end iterator from MachineBasicBlock::getFirstTerminator.
llvm-svn: 274353
For the most part this simplifies all callers. There were two places in X86 that needed an explicit makeArrayRef to shorten a statically sized array.
llvm-svn: 274337
Group" sections while lowering. In particular, for ELF sections this is
useful for creating function-specific groups that get merged into the
same named section.
Also use const Twine& instead of StringRef for the getELF functions
while we're here.
Differential Revision: http://reviews.llvm.org/D21743
llvm-svn: 274336
Summary:
This represents the adjustment applied to the implicit 'this' parameter
in the prologue of a virtual method in the MS C++ ABI. The adjustment is
always zero unless multiple inheritance is involved.
This increases the size of DISubprogram by 8 bytes, unfortunately. The
adjustment really is a signed 32-bit integer. If this size increase is
too much, we could probably win it back by splitting out a subclass with
info specific to virtual methods (virtuality, vindex, thisadjustment,
containingType).
Reviewers: aprantl, dexonsmith
Subscribers: aaboud, amccarth, llvm-commits
Differential Revision: http://reviews.llvm.org/D21614
llvm-svn: 274325
Change all the methods in LiveVariables that expect non-null
MachineInstr* to take MachineInstr& and update the call sites. This
clarifies the API, and designs away a class of iterator to pointer
implicit conversions.
llvm-svn: 274319
Convert a loop to a range-based for, using MachineInstr& instead of
MachineInstr* and removing an implicit conversion from iterator to
pointer.
llvm-svn: 274311
Use MachineInstr& over MachineInstr* to avoid implicit iterator to
pointer conversions. MachineInstr*-as-nullptr was being used as a flag
for whether the for loop terminated normally; I added an explicit `bool`
instead.
llvm-svn: 274310
TargetSubtargetInfo::overrideSchedPolicy takes two MachineInstr*
arguments (begin and end) that invite implicit conversions from
MachineInstrBundleIterator. One option would be to change their type to
an iterator, but since they don't seem to have been used since the API
was added in 2010, I'm deleting the dead code.
llvm-svn: 274304
Push MachineInstr& through helper APIs for consistency. This doesn't
remove any more implicit conversions, but it's a nice cleanup after
r274300.
llvm-svn: 274301
Switch to a range-based for in IfConverter::PredicateBlock and take
MachineInstr& in MaySpeculate to avoid an implicit conversion from
MachineBasicBlock::iterator to MachineInstr*.
llvm-svn: 274290
This is a mechanical change to make TargetLowering API take MachineInstr&
(instead of MachineInstr*), since the argument is expected to be a valid
MachineInstr. In one case, changed a parameter from MachineInstr* to
MachineBasicBlock::iterator, since it was used as an insertion point.
As a side effect, this removes a bunch of MachineInstr* to
MachineBasicBlock::iterator implicit conversions, a necessary step
toward fixing PR26753.
llvm-svn: 274287
Summary:
MSVC provide exception handlers with enhanced information to deal with security buffer feature (/GS).
To be more secure, the security cookies (GS and SEH) are validated when unwinding the stack.
The following code:
```
void f() {}
void foo() {
__try {
f();
} __except(1) {
f();
}
}
```
Reviewers: majnemer, rnk
Subscribers: thakis, llvm-commits, chrisha
Differential Revision: http://reviews.llvm.org/D21101
llvm-svn: 274239
CodeView need to know the offset of the storage allocation for a
bitfield. Encode this via the "extraData" field in DIDerivedType and
introduced a new flag, DIFlagBitField, to indicate whether or not a
member is a bitfield.
This fixes PR28162.
Differential Revision: http://reviews.llvm.org/D21782
llvm-svn: 274200
- Use range based for loops
- No need for some !Reg checks: isPhysicalRegister() reports false for
NoRegister anyway
- Do not repeat function name in documentation comment.
- Do not repeat documentation comment in implementation when we already
have one at the declaration.
- Factor some common subexpressions out.
- Change file comments to use doxygen syntax.
llvm-svn: 274194
This is mostly a mechanical change to make TargetInstrInfo API take
MachineInstr& (instead of MachineInstr* or MachineBasicBlock::iterator)
when the argument is expected to be a valid MachineInstr. This is a
general API improvement.
Although it would be possible to do this one function at a time, that
would demand a quadratic amount of churn since many of these functions
call each other. Instead I've done everything as a block and just
updated what was necessary.
This is mostly mechanical fixes: adding and removing `*` and `&`
operators. The only non-mechanical change is to split
ARMBaseInstrInfo::getOperandLatencyImpl out from
ARMBaseInstrInfo::getOperandLatency. Previously, the latter took a
`MachineInstr*` which it updated to the instruction bundle leader; now,
the latter calls the former either with the same `MachineInstr&` or the
bundle leader.
As a side effect, this removes a bunch of MachineInstr* to
MachineBasicBlock::iterator implicit conversions, a necessary step
toward fixing PR26753.
Note: I updated WebAssembly, Lanai, and AVR (despite being
off-by-default) since it turned out to be easy. I couldn't run tests
for AVR since llc doesn't link with it turned on.
llvm-svn: 274189
- Use range based for
- Use the more common variable names MBB and MF for
MachineBasicBlock/MachineFunction variables.
- Add a few const modifiers
llvm-svn: 274187
This is a fix for PR27842.
An IR-level implementation of stack coloring tailored to work with
SafeStack. It is a bit weaker than the MI implementation in that it
does not the "lifetime start at first access" logic. This can be
improved in the future.
This patch also replaces the naive implementation of stack frame
layout with a greedy algorithm that can split existing stack slots
and even fit small objects inside the alignment padding of other
objects.
llvm-svn: 274162
I think this converts all the simple cases that really just care about
the generated code being position independent or not. The remaining
uses are a bit more complicated and are checking things like "is this
a library or executable" or "can this symbol be preempted".
llvm-svn: 274055
This patch enhances dot graph viewer to show hot regions
with hot bbs/edges displayed in red. The ratio of the bb
freq to the max freq of the function needs to be no less
than the value specified by view-hot-freq-percent option.
The default value is 10 (i.e. 10%).
llvm-svn: 273996
MBFI supports profile count dumping and function
name based filtering. Add these two feature to
BFI as well. The filtering option is shared between
BFI and MBFI: -view-bfi-func-name=..
llvm-svn: 273992
BFI and MBFI's dot traits class share most of the
code and all future enhancement. This patch extracts
common implementation into base class BFIDOTGraphTraitsBase.
This patch also enables BFI graph to show branch probability
on edges as MBFI does before.
llvm-svn: 273990
The main issue here is that the "thumb" flag wasn't set for some of these
sections, making MSVC's link.exe fails to correctly relocate code
against the symbols inside these sections. link.exe could fail for
instance with the "fixup is not aligned for target 'XX'" error. If
linking doesn't fail, the relocation process goes wrong in the end and
invalid code is generated by the linker.
This patch adds Thumb/ARM information so that the right flags are set
on COFF/Windows.
Patch by Adrien Guinet.
llvm-svn: 273880
SimplifyCFG had logic to insert calls to llvm.trap for two very
particular IR patterns: stores and invokes of undef/null.
While InstCombine canonicalizes certain undefined behavior IR patterns
to stores of undef, phase ordering means that this cannot be relied upon
in general.
There are much better tools than llvm.trap: UBSan and ASan.
N.B. I could be argued into reverting this change if a clear argument as
to why it is important that we synthesize llvm.trap for stores, I'd be
hard pressed to see why it'd be useful for invokes...
llvm-svn: 273778
Remember the last choice for the top/bottom scheduling boundary in
bidirectional scheduling mode. The top choice should not change if we
schedule at the bottom and vice versa.
This allows us to improve compiletime: We only recalculate the best pick
for one border and re-use the cached top-pick from the other border.
Differential Revision: http://reviews.llvm.org/D19350
llvm-svn: 273766
In bidirectional scheduling this gives more stable results than just
comparing the "reason" fields of the top/bottom node because the reason
field may be higher depending on what other nodes are in the queue.
Differential Revision: http://reviews.llvm.org/D19401
llvm-svn: 273755
This fixes an embarrassing bug when emitting .debug_loc entries for 64-bit+ constants,
which were previously silently truncated to 32 bits.
<rdar://problem/26843232>
llvm-svn: 273736
Tail merge was making the assumption that a layout successor or
predecessor was always a cfg successor/predecessor. Remove that
assumption. Changes to tests are necessary because the errant cfg edges
were preventing optimizations.
llvm-svn: 273700
Clang emits them in reverse order to conform to the ABI, which requires
left-to-right destruction. As a result, the order doesn't fall out
naturally, and we have to sort things out in the backend.
Fixes PR28213
llvm-svn: 273696
There are two remaining issues here:
1. No vbptr information
2. Need to mention indirect virtual bases
Getting indirect virtual bases is just a matter of adding an "indirect"
flag, emitting them in the frontend, and ignoring them when appropriate
for DWARF.
All virtual bases use the same artificial vbptr field, so I think the
vbptr offset will be best represented by an implicit __vbptr$ClassName
member similar to our existing __vptr$ member.
llvm-svn: 273688
When considering whether to split an instruction with a memory operand
into an explicit load and a register-based instruction, we currently
check that the resulting instruction has exactly 1 def. This prevents 2
important LICM optimizations: compares with memory operands, and double
indirect calls. All the tests and the test-suite pass without the check.
My guess as to original intent is to limit the additional register pressure
created by the new instruction, but given that we only split out a single
register, it is already limited.
The licm-dominance test now checks actual memory loads for hoisting instead of
undef, and it tests compares.
hoist-invariant-load.ll now checks for 2 hoists, the intended hoist, and a bonus
from calling a got-relative function in a loop.
llvm-svn: 273616
Recommiting after correcting over-eager Debug Value transfer fixing PR28270.
[DAG] Previously debug values would transfer debuginfo for the selected
start node for a replacement which allows for debug to be dropped.
Push debug value transfer to occur with node/value replacement in
SelectionDAG, remove now extraneous transfers of debug values.
This refixes PR9817 which was being incompletely checked in the
testsuite.
Reviewers: jyknight
Subscribers: dblaikie, llvm-commits
Differential Revision: http://reviews.llvm.org/D21037
llvm-svn: 273585
IfConversion used to always add the undef flag when adding a use operand
on a newly predicated instruction. This would be an operand for the register
being conditionally redefined. Due to the undef flag, the liveness of this
register prior to the predicated instruction would get lost.
This patch changes this so that such use operands are added only when the
register is live, without the undef flag.
Reviewed by Quentin Colombet.
http://reviews.llvm.org/D209077
llvm-svn: 273545
When trying to convert a loading instruction into a FAULTING_LOAD, we
sometimes face code like this:
if %R10 is not null:
%R9<def> = MOV32ri Immediate
%R9<def, tied> = AND32rm %R9, 0x20(%R10)
else:
goto TRAP
In these cases we would like to use the AND32rm instruction as the
faulting operation by hoisting the "depedency" def-ing %R9 also above
the control flow, transforming the program into:
%R9<def> = MOV32ri Immediate
%R9<def, tied> = FAULTING_LOAD_OP(AND32rm %R9, 0x20(%R10), FailPath: TRAP)
This change teaches ImplicitNullChecks to do the above, when safe.
llvm-svn: 273501
This is a convenience iterator that allows clients to enumerate the
GlobalObjects within a Module.
Also start using it in a few places where it is obviously the right thing
to use.
Differential Revision: http://reviews.llvm.org/D21580
llvm-svn: 273470
-view-machine-block-freq-propagation-dags currently
support integer and fraction as the suboptions. This
patch adds the 'count' suboption to display actual
profile count if available.
llvm-svn: 273460
Recommiting after fixing over-aggressive assertion
[DAG] Previously debug values would transfer debuginfo for the selected
start node for a replacement which allows for debug to be dropped.
Push debug value transfer to occur with node/value replacement in
SelectionDAG, remove now extraneous transfers of debug values.
This refixes PR9817 which was being incompletely checked in the
testsuite.
Reviewers: jyknight
Subscribers: dblaikie, llvm-commits
Differential Revision: http://reviews.llvm.org/D21037
llvm-svn: 273456
CodeView needs to know if a virtual method was introduced in the current
class, and base classes may not have complete type information, so we
need to thread this bit through from the frontend.
llvm-svn: 273453
This is the motivating example:
struct B { int b; };
struct A { B *b; };
int f(A *p) { return p->b->b; }
Clang emits complete types for both A and B because they are required to
be complete, but our CodeView emission would only emit forward
declarations of A and B. This was a consequence of the fact that the A*
type must reference the forward declaration of A, which doesn't
reference B at all.
We can't eagerly emit complete definitions of A and B when we request
the forward declaration's type index because of recursive types like
linked lists. If we did that, our stack usage could get out of hand, and
it would be possible to lower a type while attempting to lower a type,
and we would need to double check if our type is already present in the
TypeIndexMap after all recursive getTypeIndex calls.
Instead, defer complete type emission until after all type lowering has
completed. This ensures that all referenced complete types are emitted,
and that type lowering is not re-entrant.
llvm-svn: 273443
From a design perspective, complete record type emission should not
depend on information from other complete record types.
Currently this map is unused, and needlessly accumulates data throughout
compilation.
llvm-svn: 273431
The setCallee function will set the number of fixed arguments based
on the size of the argument list. The FixedArgs parameter was often
explicitly set to 0, leading to a lack of consistent value for non-
vararg functions.
Differential Revision: http://reviews.llvm.org/D20376
llvm-svn: 273403
We now include namespace scope info in LF_FUNC_ID records and we emit
LF_MFUNC_ID records for member functions as we should.
Class names are now fully qualified, which is what MSVC does.
Add a little bit of scaffolding to handle ThisAdjustment when it arrives
in DISubprogram.
llvm-svn: 273358
Summary:
Fix the computation of the offsets present in the scopetable when using the
SEH (__except_handler4).
This patch added an intrinsic to track the position of the allocation on the
stack of the EHGuard. This position is needed when producing the ScopeTable.
```
struct _EH4_SCOPETABLE {
DWORD GSCookieOffset;
DWORD GSCookieXOROffset;
DWORD EHCookieOffset;
DWORD EHCookieXOROffset;
_EH4_SCOPETABLE_RECORD ScopeRecord[1];
};
struct _EH4_SCOPETABLE_RECORD {
DWORD EnclosingLevel;
long (*FilterFunc)();
union {
void (*HandlerAddress)();
void (*FinallyFunc)();
};
};
```
The code to generate the EHCookie is added in `X86WinEHState.cpp`.
Which is adding these instructions when using SEH4.
```
Lfunc_begin0:
# BB#0: # %entry
pushl %ebp
movl %esp, %ebp
pushl %ebx
pushl %edi
pushl %esi
subl $28, %esp
movl %ebp, %eax <<-- Loading FramePtr
movl %esp, -36(%ebp)
movl $-2, -16(%ebp)
movl $L__ehtable$use_except_handler4_ssp, %ecx
xorl ___security_cookie, %ecx
movl %ecx, -20(%ebp)
xorl ___security_cookie, %eax <<-- XOR FramePtr and Cookie
movl %eax, -40(%ebp) <<-- Storing EHGuard
leal -28(%ebp), %eax
movl $__except_handler4, -24(%ebp)
movl %fs:0, %ecx
movl %ecx, -28(%ebp)
movl %eax, %fs:0
movl $0, -16(%ebp)
calll _may_throw_or_crash
LBB1_1: # %cont
movl -28(%ebp), %eax
movl %eax, %fs:0
addl $28, %esp
popl %esi
popl %edi
popl %ebx
popl %ebp
retl
```
And the corresponding offset is computed:
```
Luse_except_handler4_ssp$parent_frame_offset = -36
.p2align 2
L__ehtable$use_except_handler4_ssp:
.long -2 # GSCookieOffset
.long 0 # GSCookieXOROffset
.long -40 # EHCookieOffset <<----
.long 0 # EHCookieXOROffset
.long -2 # ToState
.long _catchall_filt # FilterFunction
.long LBB1_2 # ExceptionHandler
```
Clang is not yet producing function using SEH4, but it's a work in progress.
This patch is a step toward having a valid implementation of SEH4.
Unfortunately, it is not yet fully working. The EH registration block is not
allocated at the right offset on the stack.
Reviewers: rnk, majnemer
Subscribers: llvm-commits, chrisha
Differential Revision: http://reviews.llvm.org/D21231
llvm-svn: 273281
When you have a map holding a unique_ptr, hold a reference to the raw
pointer instead of the unique pointer. The unique_ptr will be moved on
rehash.
llvm-svn: 273268
Summary:
canCombineSinCosLibcall() would previously combine sin+cos into sincos for
GNUX32/GNUEABI/GNUEABIHF regardless of whether UnsafeFPMath were set or not.
However, GNU would only combine them for UnsafeFPMath because sincos does not
set errno like sin and cos do. It seems likely that this is an oversight.
Reviewers: t.p.northover
Subscribers: t.p.northover, aemerson, llvm-commits, rengolin
Differential Revision: http://reviews.llvm.org/D21431
llvm-svn: 273259
Summary:
Using isOutOfOrder makes the code more clear.
Reviewers: rengolin, atrick, hfinkel.
Differential Revision: http://reviews.llvm.org/D21548
llvm-svn: 273255
An incomplete member pointer type will always have a size of zero, so we
don't need an extra flag. Credit to David Majnemer for the idea.
llvm-svn: 273057
Summary:
This seems like the least intrusive way to pass this information
through.
Fixes PR28151
Reviewers: majnemer, aprantl, dblaikie
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D21444
llvm-svn: 273053
Many CPUs only have the ability to do a 4-byte cmpxchg (or ll/sc), not 1
or 2-byte. For those, you need to mask and shift the 1 or 2 byte values
appropriately to use the 4-byte instruction.
This change adds support for cmpxchg-based instruction sets (only SPARC,
in LLVM). The support can be extended for LL/SC-based PPC and MIPS in
the future, supplanting the ISel expansions those architectures
currently use.
Tests added for the IR transform and SPARCv9.
Differential Revision: http://reviews.llvm.org/D21029
llvm-svn: 273025
Names in function id records don't include nested name specifiers or
template arguments, but names in the symbol stream include both.
For the symbol stream, instead of having Clang put the fully qualified
name in the subprogram display name, recreate it from the subprogram
scope chain. For the type stream, take the unqualified name and chop of
any template arguments.
This makes it so that CodeView DI metadata is more similar to DWARF DI
metadata.
llvm-svn: 273009
This is a fix for PR27844.
When replacing uses of unsafe allocas, emit the new location
immediately after each use. Without this, the pointer stays live from
the function entry to the last use, while it's usually cheaper to
recalculate.
llvm-svn: 272969
When moving unsafe allocas to the unsafe stack, dbg.declare intrinsics are
updated to refer to the new location.
This change does the same to dbg.value intrinsics.
llvm-svn: 272968
MSVC handles enums differently from structs and classes: a forward
declaration is not emitted unconditionally. MSVC does not emit an S_UDT
record for the enum.
Differential Revision: http://reviews.llvm.org/D21442
llvm-svn: 272960
Summary:
... into getFrameIndexReferencePreferSP. This change folds the
fail-then-retry logic into getFrameIndexReferencePreferSP.
There is a non-functional but behaviorial change in WinException --
earlier if `getFrameIndexReferenceFromSP` failed we'd trip an assert,
but now we'll silently use the (wrong) offset from the base pointer. I
could not write the assert I'd like to write ("FrameReg ==
StackRegister", like I've done in X86FrameLowering) since there is no
easy way to get to the stack register from WinException (happy to be
proven wrong here). One solution to this is to add a `bool
OnlyStackPointer` parameter to `getFrameIndexReferenceFromSP` that
asserts if it could not satisfy its promise of returning an offset from
a stack pointer, but that seems overkill.
Reviewers: rnk
Subscribers: sanjoy, mcrosier, llvm-commits
Differential Revision: http://reviews.llvm.org/D21427
llvm-svn: 272938
This allows better catching of compiler errors since we can use
the override keyword to verify that methods are actually
overridden.
Also in this patch I've changed from storing a boolean Error
code everywhere to returning an llvm::Error, to propagate richer
error information up the call stack.
Reviewed By: ruiu, rnk
Differential Revision: http://reviews.llvm.org/D21410
llvm-svn: 272926
When calculating a square root using Newton-Raphson with two constants,
a naive implementation is to use five multiplications (four muls to calculate
reciprocal square root and another one to calculate the square root itself).
However, after some reassociation and CSE the same result can be obtained
with only four multiplications. Unfortunately, there's no reliable way to do
such a reassociation in the back-end. So, the patch modifies NR code itself
so that it directly builds optimal code for SQRT and doesn't rely on any
further reassociation.
Patch by Nikolai Bozhenov!
Differential Revision: http://reviews.llvm.org/D21127
llvm-svn: 272920
Emit a S_UDT record for typedefs. We still need to do something for
class types.
Differential Revision: http://reviews.llvm.org/D21149
llvm-svn: 272813
[DAG] Previously debug values would transfer debuginfo for the selected
start node for a replacement which allows for debug to be dropped.
Push debug value transfer to occur with node/value replacement in
SelectionDAG, remove now extraneous transfers of debug values.
This refixes PR9817 which was being incompletely checked in the
testsuite.
Reviewers: jyknight
Subscribers: dblaikie, llvm-commits
Differential Revision: http://reviews.llvm.org/D21037
llvm-svn: 272792
Summary:
... when the offset is not statically known.
Prioritize addresses relative to the stack pointer in the stackmap, but
fallback gracefully to other modes of addressing if the offset to the
stack pointer is not a known constant.
Patch by Oscar Blumberg!
Reviewers: sanjoy
Subscribers: llvm-commits, majnemer, rnk, sanjoy, thanm
Differential Revision: http://reviews.llvm.org/D21259
llvm-svn: 272756
Document the new parameter and threshod computation
model. Also fix a bug when the threshold parameter
is set to be different from the default.
llvm-svn: 272749
Summary: With runtime profile, we have more confidence in branch probability, thus during basic block layout, we set a lower hot prob threshold so that blocks can be layouted optimally.
Reviewers: djasper, davidxl
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D20991
llvm-svn: 272729
If a local_unnamed_addr attribute is attached to a global, the address
is known to be insignificant within the module. It is distinct from the
existing unnamed_addr attribute in that it only describes a local property
of the module rather than a global property of the symbol.
This attribute is intended to be used by the code generator and LTO to allow
the linker to decide whether the global needs to be in the symbol table. It is
possible to exclude a global from the symbol table if three things are true:
- This attribute is present on every instance of the global (which means that
the normal rule that the global must have a unique address can be broken without
being observable by the program by performing comparisons against the global's
address)
- The global has linkonce_odr linkage (which means that each linkage unit must have
its own copy of the global if it requires one, and the copy in each linkage unit
must be the same)
- It is a constant or a function (which means that the program cannot observe that
the unique-address rule has been broken by writing to the global)
Although this attribute could in principle be computed from the module
contents, LTO clients (i.e. linkers) will normally need to be able to compute
this property as part of symbol resolution, and it would be inefficient to
materialize every module just to compute it.
See:
http://lists.llvm.org/pipermail/llvm-commits/Week-of-Mon-20160509/356401.htmlhttp://lists.llvm.org/pipermail/llvm-commits/Week-of-Mon-20160516/356738.html
for earlier discussion.
Part of the fix for PR27553.
Differential Revision: http://reviews.llvm.org/D20348
llvm-svn: 272709
Summary:
Split NumInstrDups statistic into separate added/removed counts to avoid
negative stat being printed as unsigned.
Subscribers: mcrosier, llvm-commits
Differential Revision: http://reviews.llvm.org/D21335
llvm-svn: 272700
For <N x i32> type mul, pmuludq will be used for targets without SSE41, which
often introduces many extra pack and unpack instructions in vectorized loop
body because pmuludq generates <N/2 x i64> type value. However when the operands
of <N x i32> mul are extended from smaller size values like i8 and i16, the type
of mul may be shrunk to use pmullw + pmulhw/pmulhuw instead of pmuludq, which
generates better code. For targets with SSE41, pmulld is supported so no
shrinking is needed.
Differential Revision: http://reviews.llvm.org/D20931
llvm-svn: 272694
Change EmitGlobalVariable to check final assembler section is in BSS
before using .lcomm/.comm directive. This prevents globals from being
put into .bss erroneously when -data-sections is used.
This fixes PR26570.
Reviewers: echristo, rafael
Subscribers: llvm-commits, mehdi_amini
Differential Revision: http://reviews.llvm.org/D21146
llvm-svn: 272674
The exit-on-error flag in the ARM test is necessary in order to avoid an
unreachable in the DAGTypeLegalizer, when trying to expand a physical register.
We can also avoid this situation by introducing a bitcast early on, where the
invalid scalar-to-vector conversion is detected.
We also add a test for PowerPC, which goes through a similar code path in the
SelectionDAGBuilder.
Fixes PR27765.
Differential Revision: http://reviews.llvm.org/D21061
llvm-svn: 272644
Save machine function pointer so that
the reference does not need to be passed around.
This also gives other methods access to machine
function for information such as entry count etc.
llvm-svn: 272594
This is third patch to clean up the code.
Included in this patch:
1. Further unclutter trace/chain formation main routine;
2. Isolate the logic to compute global cost/conflict detection
into its own method;
3. Heavily document the selection algorithm;
4. Added helper hook to allow PGO specific logic to be
added in the future.
llvm-svn: 272582
This is second patch to clean up the code.
In this patch, the logic to determine block outlinining
is refactored and more comments are added.
llvm-svn: 272514
This used to be free, copying and moving DebugLocs became expensive
after the metadata rewrite. Passing by reference eliminates a ton of
track/untrack operations. No functionality change intended.
llvm-svn: 272512
This is one of the patches to clean up the code so that
it is in a better form to make future enhancements easier.
In htis patch, the logic to collect viable successors are
extrated as a helper to unclutter the caller which gets very
large recenty. Also cleaned up BP adjustment code.
llvm-svn: 272482
undef uses are no real uses of a register and must be ignored by
findLastUseBefore() so that handleMove() does not produce invalid live
intervals in some cases.
This fixed http://llvm.org/PR28083
llvm-svn: 272446
Summary:
When stack-protection is activated and WinEH exceptions is used,
the EHRegNode (exception handling registration) is allocated twice on the stack.
This was not breaking anything except loosing space on the stack.
```
D:\src\llvm\examples>llc exc2.ll -debug-only=pei
alloc FI(0) at SP[-24]
alloc FI(1) at SP[-48] <<-- Allocated
alloc FI(1) at SP[-72] <<-- Allocated twice!?
alloc FI(2) at SP[-76]
alloc FI(4) at SP[-80]
alloc FI(3) at SP[-84]
```
Reviewers: rnk, majnemer
Subscribers: chrisha, llvm-commits
Differential Revision: http://reviews.llvm.org/D21188
llvm-svn: 272426
Adds a MachineFunctionPass that scans the body to find calls, and
update the register mask with the one saved by the
RegUsageInfoCollector analysis in PhysicalRegisterUsageInfo.
Patch by Vivek Pandya <vivekvpandya@gmail.com>
Differential Revision: http://reviews.llvm.org/D21180
llvm-svn: 272414
Add an option to enable the analysis of MachineFunction register
usage to extract the list of clobbered registers.
When enabled, the CodeGen order is changed to be bottom up on the Call
Graph.
The analysis is split in two parts, RegUsageInfoCollector is the
MachineFunction Pass that runs post-RA and collect the list of
clobbered registers to produce a register mask.
An immutable pass, RegisterUsageInfo, stores the RegMask produced by
RegUsageInfoCollector, and keep them available. A future tranformation
pass will use this information to update every call-sites after
instruction selection.
Patch by Vivek Pandya <vivekvpandya@gmail.com>
Differential Revision: http://reviews.llvm.org/D20769
llvm-svn: 272403
When we delete a live-range, we check if that live-range is the origin of others
to keep it around for rematerialization. For that we check that the instruction
we are about to remove is the same as the definition of the VNI of the original
live-range.
If this is the case, we just shrink the live-range to an empty one.
Now, when we try to delete one of the children of such live-range (product of
splitting), we do the same check.
However, now the original live-range is empty and there is no way we can
access the VNI to check its definition, and we crash.
When we cannot get the VNI for the original live-range, that means we are not in
the presence of the original definition. Thus, this check does not need to happen
in that case and the crash is sloved!
This bug was introduced in r266162 | wmi | 2016-04-12 20:08:27. It affects every
target that uses the greedy register allocator.
To happen, we need to delete both a the original instruction and its split
products, in that order. This is likely to happen when rematerialization comes
into play.
Trying to produce a more robust test case. Will follow in a coming commit.
This fixes llvm.org/PR27983.
rdar://problem/26651519
llvm-svn: 272314
This reapplies commit r271930, r271915, r271923. They hit a bug in
Thumb which is fixed in r272258 now.
The original message:
The code layout that TailMerging (inside BranchFolding) works on is not the
final layout optimized based on the branch probability. Generally, after
BlockPlacement, many new merging opportunities emerge.
This patch calls Tail Merging after MBP and calls MBP again if Tail Merging
merges anything.
llvm-svn: 272267
Without that check it was possible to write test cases where the size
was not specified and we ended up with weird asserts down the road,
because the default value (1) would not make sense.
llvm-svn: 272226
For complex rewrittings, which do not occur currently, the related
machine instruction may have been deleted in the process. Therefore, do
not try to print it after the mapping is applied.
llvm-svn: 272209
Refactor the code so that we do not compute in two different places the
end iterator for the range of new virtual registers for a given operand.
Although this refactoring was intended as NFC, this is not the case
because it actually fixes a bug where we were returning a range off by 1
(too long). Right now, this could not result in an actual bug because we
were accessing this range via the BreakDown size of the related operand.
llvm-svn: 272208
Summary:
Consider the following diamond CFG:
A
/ \
B C
\/
D
Suppose A->B and A->C have probabilities 81% and 19%. In block-placement, A->B is called a hot edge and the final placement should be ABDC. However, the current implementation outputs ABCD. This is because when choosing the next block of B, it checks if Freq(C->D) > Freq(B->D) * 20%, which is true (if Freq(A) = 100, then Freq(B->D) = 81, Freq(C->D) = 19, and 19 > 81*20%=16.2). Actually, we should use 25% instead of 20% as the probability here, so that we have 19 < 81*25%=20.25, and the desired ABDC layout will be generated.
Reviewers: djasper, davidxl
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D20989
llvm-svn: 272203
Summary:
Now DISubroutineType has a 'cc' field which should be a DW_CC_ enum. If
it is present and non-zero, the backend will emit it as a
DW_AT_calling_convention attribute. On the CodeView side, we translate
it to the appropriate enum for the LF_PROCEDURE record.
I added a new LLVM vendor specific enum to the list of DWARF calling
conventions. DWARF does not appear to attempt to standardize these, so I
assume it's OK to do this until we coordinate with GCC on how to emit
vectorcall convention functions.
Reviewers: dexonsmith, majnemer, aaboud, amccarth
Subscribers: mehdi_amini, llvm-commits
Differential Revision: http://reviews.llvm.org/D21114
llvm-svn: 272197
When repairing with a copy, instead of accounting for the cost of that
copy and actually inserting it, we may be able to use an alternative
source for the register to repair and just use it.
Make sure this is documented, so that we consider that opportunity at
some point.
llvm-svn: 272176
Now, the target will be able to provide its how implementation to remap
an instruction. This open the way to crazier optimizations, but to
beginning with, we will be able to handle something else than the
default mapping.
llvm-svn: 272165
When the command line option is set, it overrides any thing that the
target may have set. The rationale is that we get what we asked for.
Options are respectively regbankselect-fast and regbankselect-greedy for
fast and greedy mode.
llvm-svn: 272158
repairing.
Copies are easy because we repair only when there is a mismatch. For
non-copy repairing, i.e., cases that involves breaking down or gathering
up the value, one of the operand may not have a register bank yet. Thus,
derivate a cost from that, requires more work.
llvm-svn: 272157
As suggested by clang-tidy's performance-unnecessary-copy-initialization.
This can easily hit lifetime issues, so I audited every change and ran the
tests under asan, which came back clean.
llvm-svn: 272126
The cost of a copy may be different based on how many bits we have to
copy around. E.g., a 8-bit copy may be different than a 32-bit copy.
llvm-svn: 272084
Summary:
This patch is adding support for the MSVC buffer security check implementation
The buffer security check is turned on with the '/GS' compiler switch.
* https://msdn.microsoft.com/en-us/library/8dbf701c.aspx
* To be added to clang here: http://reviews.llvm.org/D20347
Some overview of buffer security check feature and implementation:
* https://msdn.microsoft.com/en-us/library/aa290051(VS.71).aspx
* http://www.ksyash.com/2011/01/buffer-overflow-protection-3/
* http://blog.osom.info/2012/02/understanding-vs-c-compilers-buffer.html
For the following example:
```
int example(int offset, int index) {
char buffer[10];
memset(buffer, 0xCC, index);
return buffer[index];
}
```
The MSVC compiler is adding these instructions to perform stack integrity check:
```
push ebp
mov ebp,esp
sub esp,50h
[1] mov eax,dword ptr [__security_cookie (01068024h)]
[2] xor eax,ebp
[3] mov dword ptr [ebp-4],eax
push ebx
push esi
push edi
mov eax,dword ptr [index]
push eax
push 0CCh
lea ecx,[buffer]
push ecx
call _memset (010610B9h)
add esp,0Ch
mov eax,dword ptr [index]
movsx eax,byte ptr buffer[eax]
pop edi
pop esi
pop ebx
[4] mov ecx,dword ptr [ebp-4]
[5] xor ecx,ebp
[6] call @__security_check_cookie@4 (01061276h)
mov esp,ebp
pop ebp
ret
```
The instrumentation above is:
* [1] is loading the global security canary,
* [3] is storing the local computed ([2]) canary to the guard slot,
* [4] is loading the guard slot and ([5]) re-compute the global canary,
* [6] is validating the resulting canary with the '__security_check_cookie' and performs error handling.
Overview of the current stack-protection implementation:
* lib/CodeGen/StackProtector.cpp
* There is a default stack-protection implementation applied on intermediate representation.
* The target can overload 'getIRStackGuard' method if it has a standard location for the stack protector cookie.
* An intrinsic 'Intrinsic::stackprotector' is added to the prologue. It will be expanded by the instruction selection pass (DAG or Fast).
* Basic Blocks are added to every instrumented function to receive the code for handling stack guard validation and errors handling.
* Guard manipulation and comparison are added directly to the intermediate representation.
* lib/CodeGen/SelectionDAG/SelectionDAGISel.cpp
* lib/CodeGen/SelectionDAG/SelectionDAGBuilder.cpp
* There is an implementation that adds instrumentation during instruction selection (for better handling of sibbling calls).
* see long comment above 'class StackProtectorDescriptor' declaration.
* The target needs to override 'getSDagStackGuard' to activate SDAG stack protection generation. (note: getIRStackGuard MUST be nullptr).
* 'getSDagStackGuard' returns the appropriate stack guard (security cookie)
* The code is generated by 'SelectionDAGBuilder.cpp' and 'SelectionDAGISel.cpp'.
* include/llvm/Target/TargetLowering.h
* Contains function to retrieve the default Guard 'Value'; should be overriden by each target to select which implementation is used and provide Guard 'Value'.
* lib/Target/X86/X86ISelLowering.cpp
* Contains the x86 specialisation; Guard 'Value' used by the SelectionDAG algorithm.
Function-based Instrumentation:
* The MSVC doesn't inline the stack guard comparison in every function. Instead, a call to '__security_check_cookie' is added to the epilogue before every return instructions.
* To support function-based instrumentation, this patch is
* adding a function to get the function-based check (llvm 'Value', see include/llvm/Target/TargetLowering.h),
* If provided, the stack protection instrumentation won't be inlined and a call to that function will be added to the prologue.
* modifying (SelectionDAGISel.cpp) do avoid producing basic blocks used for inline instrumentation,
* generating the function-based instrumentation during the ISEL pass (SelectionDAGBuilder.cpp),
* if FastISEL (not SelectionDAG), using the fallback which rely on the same function-based implemented over intermediate representation (StackProtector.cpp).
Modifications
* adding support for MSVC (lib/Target/X86/X86ISelLowering.cpp)
* adding support function-based instrumentation (lib/CodeGen/SelectionDAG/SelectionDAGBuilder.cpp, .h)
Results
* IR generated instrumentation:
```
clang-cl /GS test.cc /Od /c -mllvm -print-isel-input
```
```
*** Final LLVM Code input to ISel ***
; Function Attrs: nounwind sspstrong
define i32 @"\01?example@@YAHHH@Z"(i32 %offset, i32 %index) #0 {
entry:
%StackGuardSlot = alloca i8* <<<-- Allocated guard slot
%0 = call i8* @llvm.stackguard() <<<-- Loading Stack Guard value
call void @llvm.stackprotector(i8* %0, i8** %StackGuardSlot) <<<-- Prologue intrinsic call (store to Guard slot)
%index.addr = alloca i32, align 4
%offset.addr = alloca i32, align 4
%buffer = alloca [10 x i8], align 1
store i32 %index, i32* %index.addr, align 4
store i32 %offset, i32* %offset.addr, align 4
%arraydecay = getelementptr inbounds [10 x i8], [10 x i8]* %buffer, i32 0, i32 0
%1 = load i32, i32* %index.addr, align 4
call void @llvm.memset.p0i8.i32(i8* %arraydecay, i8 -52, i32 %1, i32 1, i1 false)
%2 = load i32, i32* %index.addr, align 4
%arrayidx = getelementptr inbounds [10 x i8], [10 x i8]* %buffer, i32 0, i32 %2
%3 = load i8, i8* %arrayidx, align 1
%conv = sext i8 %3 to i32
%4 = load volatile i8*, i8** %StackGuardSlot <<<-- Loading Guard slot
call void @__security_check_cookie(i8* %4) <<<-- Epilogue function-based check
ret i32 %conv
}
```
* SelectionDAG generated instrumentation:
```
clang-cl /GS test.cc /O1 /c /FA
```
```
"?example@@YAHHH@Z": # @"\01?example@@YAHHH@Z"
# BB#0: # %entry
pushl %esi
subl $16, %esp
movl ___security_cookie, %eax <<<-- Loading Stack Guard value
movl 28(%esp), %esi
movl %eax, 12(%esp) <<<-- Store to Guard slot
leal 2(%esp), %eax
pushl %esi
pushl $204
pushl %eax
calll _memset
addl $12, %esp
movsbl 2(%esp,%esi), %esi
movl 12(%esp), %ecx <<<-- Loading Guard slot
calll @__security_check_cookie@4 <<<-- Epilogue function-based check
movl %esi, %eax
addl $16, %esp
popl %esi
retl
```
Reviewers: kcc, pcc, eugenis, rnk
Subscribers: majnemer, llvm-commits, hans, thakis, rnk
Differential Revision: http://reviews.llvm.org/D20346
llvm-svn: 272053
This reverts commit r271962 and reinstantes r271957.
MSVC's linker doesn't appear to like it if you have an empty symbol
substream, so only open a symbol substream if we're going to emit
something about globals into it.
Makes check-asan pass.
llvm-svn: 271965
The code layout that TailMerging (inside BranchFolding) works on is not the
final layout optimized based on the branch probability. Generally, after
BlockPlacement, many new merging opportunities emerge.
This patch calls Tail Merging after MBP and calls MBP again if Tail Merging
merges anything.
Differential Revision: http://reviews.llvm.org/D20276
llvm-svn: 271925
C++ has a builtin type called wchar_t. Clang also provides a type
called __wchar_t in C mode.
In C mode, wchar_t can be a typedef to unsigned short.
llvm-svn: 271793
My first attempt at this had an overly aggressive assert - chain nodes
will only be removed, but we could hit the assert if a non-chain node
was CSE'd (NodeToMatch, for instance).
This reapplies r271706 by reverting r271713 and fixing an assert.
Original message:
Avoid relying on UB by looking into deleted nodes for a marker value.
Instead, update the list of chain nodes as we go.
llvm-svn: 271733
This only translates data members for now. Translating overloaded
methods is complicated, so I stopped short of doing that.
Reviewers: aaboud
Differential Revision: http://reviews.llvm.org/D20924
llvm-svn: 271680
The DIType* for void is the null pointer. A null DIType can never be a
qualified type, so we can just exit the loop at this point and go to
getTypeIndex(BaseTy).
Fixes PR27984
llvm-svn: 271550
Summary:
If the target requests it, use emptry spaces in the fixed and
callee-save stack area to allocate local stack objects.
AArch64: Change last callee-save reg stack object alignment instead of
size to leave a gap to take advantage of above change.
Reviewers: t.p.northover, qcolombet, MatzeB
Subscribers: rengolin, mcrosier, llvm-commits, aemerson
Differential Revision: http://reviews.llvm.org/D20220
llvm-svn: 271527
Although this was intended to be NFC, the test case wiggle shows a change in
code scheduling/RA caused by a difference in the SDLoc() generation.
Depending on how you look at it, this is the (dis)advantage of exact checking
in regression tests.
llvm-svn: 271526
Use the type index of the underlying type unless we have a typedef from
long to HRESULT; HRESULT typedefs are translated to T_HRESULT.
llvm-svn: 271494
When the index is known to be constant 0, insert directly into the the low half,
instead of spilling, performing the insert in-memory, and reloading.
Differential Revision: http://reviews.llvm.org/D20763
llvm-svn: 271428
Summary:
Re-enable lifetime-start-on-first-use for stack coloring,
but explicitly disable it for slots with more than one start
or end lifetime marker.
Bug: 27903
Reviewers: wmi, tejohnson, qcolombet, gbiv
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D20739
llvm-svn: 271412
Summary:
This is meant to be the tiniest step towards DIType to CV type index
translation that I could come up with. Whenever translation fails, we use type
index zero, which is the unknown type.
Reviewers: aaboud, zturner
Subscribers: llvm-commits, amccarth
Differential Revision: http://reviews.llvm.org/D20840
llvm-svn: 271408
This should have been converting the size to bytes, but wasn't really.
These should probably all be using getStoreSize instead.
I haven't been able to come up with a meaningful testcase for this.
I can trigger it using combinations of struct loads and stores,
but can't observe a difference in non-broken testcases.
isAlias is only really used during store merging, so I'm not sure how
to get into the vector splitting situation the comment describes
since store merging is only done before type legalization.
llvm-svn: 271356
Refactor LiveIntervals::renameDisconnectedComponents() to be a pass.
Also change the name to "RenameIndependentSubregs":
- renameDisconnectedComponents() worked on a MachineFunction at a time
so it is a natural candidate for a machine function pass.
- The algorithm is testable with a .mir test now.
- This also fixes a problem where the lazy renaming as part of the
MachineScheduler introduced IMPLICIT_DEF instructions after the number
of a nodes in a region were counted leading to a mismatch.
Differential Revision: http://reviews.llvm.org/D20507
llvm-svn: 271345
We think it's OK to generate half fminnan because it's legal for the
transform-to type (f32; r245196). However, PromoteFloatRes was missing
the case; simply promote like the other binops, including minnum.
llvm-svn: 271317
Adds the method MCStreamer::EmitBinaryData, which is usually an alias
for EmitBytes. In the MCAsmStreamer case, it is overridden to emit hex
dump output like this:
.byte 0x0e, 0x00, 0x08, 0x10
.byte 0x03, 0x00, 0x00, 0x00
.byte 0x00, 0x00, 0x00, 0x00
.byte 0x00, 0x10, 0x00, 0x00
Also, when verbose asm comments are enabled, this patch prints the dump
output for each comment before its record, like this:
# ArgList (0x1000) {
# TypeLeafKind: LF_ARGLIST (0x1201)
# NumArgs: 0
# Arguments [
# ]
# }
.byte 0x06, 0x00, 0x01, 0x12
.byte 0x00, 0x00, 0x00, 0x00
This should make debugging easier and testing more convenient.
Reviewers: aaboud
Subscribers: majnemer, zturner, amccarth, aaboud, llvm-commits
Differential Revision: http://reviews.llvm.org/D20711
llvm-svn: 271313
This adds support to the backed to actually support SjLj EH as an exception
model. This is *NOT* the default model, and requires explicitly opting into it
from the frontend. GCC supports this model and for MinGW can still be enabled
via the `--using-sjlj-exceptions` options.
Addresses PR27749!
llvm-svn: 271244
Summary:
Turn off lifetime-start-on-first-use enhancement for the moment
pending a fix for bug 27903.
Bug: 27903
Reviewers: tejohnson, wmi, qcolombet, gbiv
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D20731
llvm-svn: 271003
Fix: updated clang code which was not updated by mistake.
Original commit message:
[llvm-mc] - Teach llvm-mc to generate zlib styled compression sections.
This patch is strongly based on previously reverted D20331.
(because of gnuutils < 2.26 does not support compressed debug sections in non zlib-gnu style)
Difference that this patch supports both zlib and zlib-gnu styles.
-compress-debug-sections option now supports next values:
-compress-debug-sections=zlib-gnu
-compress-debug-sections=zlib
-compress-debug-sections=none
Previously specifying -compress-debug-sections enabled zlib-gnu compression,
so anyone can put "-compress-debug-sections=zlib-gnu" to restore the behavior
that was before this patch for case when compression was enabled.
Differential revision: http://reviews.llvm.org/D20676
llvm-svn: 270987
It broke buildbot:
http://lab.llvm.org:8011/builders/llvm-clang-lld-x86_64-scei-ps4-ubuntu-fast/builds/13585/steps/build/logs/stdio
Initial commit message:
[llvm-mc] - Teach llvm-mc to generate zlib styled compression sections.
This patch is strongly based on previously reverted D20331.
(because of gnuutils < 2.26 does not support compressed debug sections in non zlib-gnu style)
Difference that this patch supports both zlib and zlib-gnu styles.
-compress-debug-sections option now supports next values:
-compress-debug-sections=zlib-gnu
-compress-debug-sections=zlib
-compress-debug-sections=none
Previously specifying -compress-debug-sections enabled zlib-gnu compression,
so anyone can put "-compress-debug-sections=zlib-gnu" to restore the behavior
that was before this patch for case when compression was enabled.
Differential revision: http://reviews.llvm.org/D20676
llvm-svn: 270978
This patch is strongly based on previously reverted D20331.
(because of gnuutils < 2.26 does not support compressed debug sections in non zlib-gnu style)
Difference that this patch supports both zlib and zlib-gnu styles.
-compress-debug-sections option now supports next values:
-compress-debug-sections=zlib-gnu
-compress-debug-sections=zlib
-compress-debug-sections=none
Previously specifying -compress-debug-sections enabled zlib-gnu compression,
so anyone can put "-compress-debug-sections=zlib-gnu" to restore the behavior
that was before this patch for case when compression was enabled.
Differential revision: http://reviews.llvm.org/D20676
llvm-svn: 270977
CriticalAntiDepBreaker was not correctly tracking defs of the high X86 byte
registers, leading to incorrect use of a busy register to break an
antidependence.
Fixes pr27681, and its duplicates pr27580, pr27804.
Differential Revision: http://reviews.llvm.org/D20456
llvm-svn: 270935
This patch builds upon r270776 and speeds up
LiveDebugValues::transferDebugValue() by adding an index that maps each
DebugVariable to its open VarLoc.
The transferDebugValue() function needs to close all open ranges for a
given DebugVariable. Iterating over the set bits of OpenRanges is
prohibitively slow in practice. I experimented with using the sorted map
of VarLocs in the UniqueVector to iterate only over the range of VarLocs
with a given DebugVariable, but the binary search turned out to be even
more expensive than just iterating over the set bits in OpenRanges.
Instead, this patch exploits the fact that there can only be one open
location for each DebugVariable and redundantly stores this location in a
DenseMap.
This patch brings the time spent in the LiveDebugValues pass down to an
almost neglectiable amount.
http://llvm.org/bugs/show_bug.cgi?id=26055http://reviews.llvm.org/D20636
rdar://problem/24091200
llvm-svn: 270923
Summary:
This allows the linker to discard unused symbol information for comdat
functions that were discarded during the link. Before this change,
searching for the name of an inline function in the debugger would
return multiple results, one per symbol subsection in the object file.
After this change, there is only one result, the result for the function
chosen by the linker.
Reviewers: zturner, majnemer
Subscribers: aaboud, amccarth, llvm-commits
Differential Revision: http://reviews.llvm.org/D20642
llvm-svn: 270792
This patch modifies the LiveDebugValues pass to use more efficient set
data structures as outlined in PR26055. Both VarLocSet and VarLocList are
now SparseBitVectors which allows us to perform much faster bitvector
arithmetic on them.
The speedup can be in the order of minutes especially on ASANified code.
The change is not NFC in the assembler output because the inserted
DBG_VALUEs are now sorted by variable and location.
Many thanks to Daniel Berlin for helping design the improved algorithm and
reviewing the patch.
https://llvm.org/bugs/show_bug.cgi?id=26055http://reviews.llvm.org/D20178
rdar://problem/24091200
llvm-svn: 270776
LegalizeIntegerTypes does not have a way to expand multiplications for large
integer types (i.e. larger than twice the native bit width). There's no
standard runtime call to use in that case, and so we'd just assert.
Unfortunately, as it turns out, it is possible to hit this case from
standard-ish C code in rare cases. A particular case a user ran into yesterday
involved an __int128 induction variable and a loop with a quadratic (not
linear) recurrence which triggered some backend logic using SCEVExpander. In
this case, the BinomialCoefficient code in SCEV generates some i129 variables,
which get widened to i256. At a high level, this is not actually good (i.e. the
underlying optimization, PPCLoopPreIncPrep, should not be transforming the loop
in question for performance reasons), but regardless, the backend shouldn't
crash because of cost-modeling issues in the optimizer.
This is a straightforward implementation of the multiplication expansion, based
on the algorithm in Hacker's Delight. I validated it against the code for the
mul256b function from http://locklessinc.com/articles/256bit_arithmetic/ using
random inputs. There should be no functional change for previously-working code
(the new expansion code only replaces an assert).
Fixes PR19797.
llvm-svn: 270720
Also, rename recognizeBitReverseOrBSwapIdiom to recognizeBSwapOrBitReverseIdiom,
so the ordering of the MatchBSwaps and MatchBitReversals arguments are
consistent with the function name.
llvm-svn: 270715
We have to modify V2SU before inserting new elements into the
CurrentVRegDefs set because that may move V2SU in memory invalidating
the reference.
llvm-svn: 270644
The benefits of this patch are
-- We call AnalyzeBranch() to optimize unanalyzable branches, but the result of
AnalyzeBranch() is not used. Now the result is useful.
-- Before the layout of all the MBBs is set, the result of AnalyzeBranch() is
not correct and needs to be fixed before using it to optimize the branch
conditions. Now this optimization is called after the layout, the code used
to fix the result of AnalyzeBranch() is not needed.
-- The branch condition of the last block is not optimized before. Now it is
optimized.
Differential Revision: http://reviews.llvm.org/D20177
llvm-svn: 270623
These attributes aren't used by other debuggers (& may be confused with
other DWARF extensions) so they just waste space (about 1.5% on .dwo
file size on a random large program I tested).
We could remove the ObjC property ones too, but I figured they were
probably more necessary when trying to understand ObjC (I could be wrong
though) & so any debugger interested in working with ObjC would use
them, perhaps? (also, there are some legacy tests in Clang that test for
them - making it one of those annoying cross-project commits and/or
cleanup to refactor those tests)
llvm-svn: 270613
Replace bidirectional flow analysis to compute liveness with forward
analysis pass. Treat lifetimes as starting when there is a first
reference to the stack slot, as opposed to starting at the point of the
lifetime.start intrinsic, so as to increase the number of stack
variables we can overlap.
Reviewers: gbiv, qcolumbet, wmi
Differential Revision: http://reviews.llvm.org/D18827
Bug: 25776
llvm-svn: 270559
Before r269750 we did the comparisons in this loop in signed ints so
that it DTRT when MinCSFrameIndex was 0. This was changed because it's
now possible for MinCSFrameIndex to be UINT_MAX, but that introduced a
bug when we were comparing `>= 0` - this is tautological in unsigned.
Rework the comparisons here to avoid issues with unsigned wrapping.
No test. I couldn't find a way to get any of the StackGrowsUp in-tree
targets to reach the code that sets MinCSFrameIndex.
llvm-svn: 270492
This effectively revers commit r270389 and re-lands r270106, but it's
almost a rewrite.
The behavior change in r270106 was that we could no longer assume that
each LF_FUNC_ID record got its own type index. This patch adds a map
from DINode* to TypeIndex, so we can stop making that assumption.
This change also emits padding bytes between type records similar to the
way MSVC does. The size of the type record includes the padding bytes.
llvm-svn: 270485
Summary:
MBBs don't necessarily have a name (in my experience, they almost never
do), in which case this logging is quite unhelpful. The number seems to
work well.
Reviewers: iteratee
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D20533
llvm-svn: 270477
This will pave the way to introduce a full fledged symbol visitor
similar to how we have a type visitor, thus allowing the same
dumping code to be used in llvm-readobj and llvm-pdbdump.
Differential Revision: http://reviews.llvm.org/D20384
Reviewed By: rnk
llvm-svn: 270475
This fixes a bug introduced in:
r262115 - CodeGen: Take MachineInstr& in SlotIndexes and LiveIntervals, NFC
The iterator End here might == MBB->end(), and so we can't unconditionally
dereference it. This often goes unnoticed (I don't have a test case that always
crashes, and ASAN does not catch it either) because the function call arguments are
turned right back into iterators. MachineInstrBundleIterator's constructor,
however, does have an assert which might randomly fire.
llvm-svn: 270323
Prior to this patch, we were using 1 for all the repairing costs.
Now, we use the information from the target to get this information.
llvm-svn: 270304
We now use LiveRangeCalc::extendToUses() instead of a specially designed
algorithm in constructMainRangeFromSubranges():
- The original motivation for constructMainRangeFromSubranges() were
differences between the main liverange and subranges because of hidden
dead definitions. This case however cannot happen anymore with the
DetectDeadLaneMasks pass in place.
- It simplifies the code.
- This fixes a longstanding bug where we did not properly create new SSA
values on merging control flow (the MachineVerifier missed most of
these cases).
- Move constructMainRangeFromSubranges() to LiveIntervalAnalysis and
LiveRangeCalc to better match the implementation/available helper
functions.
This re-applies r269016. The fixes from r270290 and r270259 should avoid
the machine verifier problems this time.
llvm-svn: 270291
It is fine for subregister ranges to be undefined on some CFG paths as
we may have a "vregX:other_subreg<read-undef> =" def on that path. We
do not (and should not) have live segments for the subregister ranges.
The MachineVerifier should not complain about this.
This is a slight variant of http://llvm.org/PR27705
llvm-svn: 270290
Depending on the compiler used to build LLVM, llvm_unreachable can either
expand to a call to abort(), or to a __builtin_unreachable. The latter
does not have a predictable behavior at runtime.
llvm-svn: 270260
Fix renameDisconnectedComponents() creating vreg uses that can be
reached from function begin withouthaving a definition (or explicit
live-in). Fix this by inserting IMPLICIT_DEF instruction before
control-flow joins as necessary.
Removes an assert from MachineScheduler because we may now get
additional IMPLICIT_DEF when preparing the scheduling policy.
This fixes the underlying problem of http://llvm.org/PR27705
llvm-svn: 270259
This gives AsmPrinter a chance to initialize its DD field before
we call beginModule(), which is about to start using it.
Differential Revision: http://reviews.llvm.org/D20413
llvm-svn: 270258
We are about to start using DIEDwarfExpression to create global variable
DIEs, which happens before we generate code for functions.
Differential Revision: http://reviews.llvm.org/D20412
llvm-svn: 270257
The Fast mode takes the first mapping, the greedy mode loops over all
the possible mapping for an instruction and choose the cheaper one.
Test case will come with target specific code, since we currently do not
have instructions that have several mappings.
llvm-svn: 270249
computeMapping.
Computing the cost of a mapping takes some time.
Since in Fast mode, the cost is irrelevant, just spare some cycles by not
computing it.
In Greedy mode, we need to choose the best cost, that means that when
the local cost gets more expensive than the best cost, we can stop
computing the repairing and cost for the current mapping.
llvm-svn: 270245
The previous choice of the insertion points for repairing was
straightfoward but may introduce some basic block or edge splitting. In
some situation this is something we can avoid.
For instance, when repairing a phi argument, instead of placing the
repairing on the related incoming edge, we may move it to the previous
block, before the terminators. This is only possible when the argument
is not defined by one of the terminator.
llvm-svn: 270232
an instruction.
Use the previously introduced RepairingPlacement class to split the code
computing the repairing placement from the code doing the actual
placement. That way, we will be able to consider different placement and
then, only apply the best one.
llvm-svn: 270168
When assigning the register banks we may have to insert repairing code
to move already assigned values accross register banks.
Introduce a few helper classes to keep track of what is involved in the
repairing of an operand:
- InsertPoint and its derived classes record the positions, in the CFG,
where repairing has to be inserted.
- RepairingPlacement holds all the insert points for the repairing of an
operand plus the kind of action that is required to do the repairing.
This is going to be used to keep track of how the repairing should be
done, while comparing different solutions for an instruction. Indeed, we
will need the repairing placement to capture the cost of a solution and
we do not want to compute it a second time when we do the actual
repairing.
llvm-svn: 270167
register bank twice.
Prior to this change, we were checking if the assignment for the current
machine operand was matching, then we would check if the mismatch
requires to insert repair code.
We actually already have this information from the first check, so just
pass it along.
NFCI.
llvm-svn: 270166
Sorry for the lack testcase. There is one in the pr, but it depends on
std::sort and the .ll version is 110 lines, so I don't think it is
wort it.
The bug was that we were sorting after adding a terminator, and the
sorting algorithm could end up putting the terminator in the middle of
the List vector.
With that we would create a Spans map entry keyed on nullptr which would
then be added to CUs and fail in that sorting.
llvm-svn: 270165
This helper class will be used to represent the cost of mapping an
instruction to a specific register bank.
The particularity of these costs is that they are mostly local, thus the
frequency of the basic block is irrelevant. However, for few
instructions (e.g., phis and terminators), the cost may be non-local and
then, we need to account for the frequency of the involved basic blocks.
This will be used by the greedy mode I am working on.
llvm-svn: 270163
Using Chandler's words from r265331:
This commit was greatly exacerbating PR17409 and effectively regressed
build time for lot of (very large) code when compiled with ASan or MSan.
PR17409 is fixed by r269249, so this is fine to reapply r263460.
Original commit message:
The bad behavior happens when we have a function with a long linear
chain of basic blocks, and have a live range spanning most of this
chain, but with very few uses.
Let say we have only 2 uses.
The Hopfield network is only seeded with two active blocks where the
uses are, and each iteration of the outer loop in
`RAGreedy::growRegion()` only adds two new nodes to the network due to
the completely linear shape of the CFG. Meanwhile,
`SpillPlacer->iterate()` visits the whole set of discovered nodes, which
adds up to a quadratic algorithm.
This is an historical accident effect from r129188.
When the Hopfield network is expanding, most of the action is happening
on the frontier where new nodes are being added. The internal nodes in
the network are not likely to be flip-flopping much, or they will at
least settle down very quickly. This means that while
`SpillPlacer->iterate()` is recomputing all the nodes in the network, it
is probably only the two frontier nodes that are changing their output.
Instead of recomputing the whole network on each iteration, we can
maintain a SparseSet of nodes that need to be updated:
- `SpillPlacement::activate()` adds the node to the todo list.
- When a node changes value (i.e., `update()` returns true), its
neighbors are added to the todo list.
- `SpillPlacement::iterate()` only updates the nodes in the list.
The result of Hopfield iterations is not necessarily exact. It should
converge to a local minimum, but there is no guarantee that it will find
a global minimum. It is possible that updating nodes in a different
order will cause us to switch to a different local minimum. In other
words, this is not NFC, but although I saw a few runtime improvements
and regressions when I benchmarked this change, those were side effects
and actually the performance change is in the noise as expected.
Huge thanks to Jakob Stoklund Olesen <stoklund@2pi.dk> for his
feedbacks, guidance and time for the review.
llvm-svn: 270149
When matching an interleaved load to an ldN pattern, the interleaved access
pass checks that all users of the load are shuffles. If the load is used by an
instruction other than a shuffle, the pass gives up and an ldN is not
generated. This patch considers users of the load that are extractelement
instructions. It attempts to modify the extracts to use one of the available
shuffles rather than the load. After the transformation, the load is only used
by shuffles and will then be matched with an ldN pattern.
Differential Revision: http://reviews.llvm.org/D20250
llvm-svn: 270142
A baby step toward translating DIType records to CodeView.
This does not (yet) combine the record length with the record data. I'm going back and forth trying to determine if that's a good idea.
llvm-svn: 270106
Previously, specifying -post-RA-scheduler=true had the side effect of
disabling the antidependency breaker, yielding different behavior than
if the post-RA-scheduler was enabled via the scheduling model.
Differential Revision: http://reviews.llvm.org/D20186
llvm-svn: 270077
There are at least 2 places (DAGCombiner, X86ISelLowering) where this could be used instead
of ad-hoc and watered down code that is trying to match a power-of-2 pattern.
Differential Revision: http://reviews.llvm.org/D20439
llvm-svn: 270073
When looking for an available spill slot, the register scavenger would stop
after finding the first one with no register assigned to it. That slot may
have size and alignment that do not meet the requirements of the register
that is to be spilled. Instead, find an available slot that is the closest
in size and alignment to one that is needed to spill a register from RC.
Differential Revision: http://reviews.llvm.org/D20295
llvm-svn: 269969
with an additional fix to make RegAllocFast ignore undef physreg uses. It would
previously get confused about the "push %eax" instruction's use of eax. That
method for adjusting the stack pointer is used in X86FrameLowering::emitSPUpdate
as well, but since that runs after register-allocation, we didn't run into the
RegAllocFast issue before.
llvm-svn: 269949
* Reworks the CVSymbolTypes.def to work similarly to TypeRecords.def.
* Moves some enums from SymbolRecords.h to CodeView.h to maintain
consistency with how we do type records.
* Generalize a few simple things like the record prefix
* Define the leaf enum and the kind enum similar to how we do with tyep
records.
Differential Revision: http://reviews.llvm.org/D20342
Reviewed By: amccarth, rnk
llvm-svn: 269867
instead of having DwarfUnit query the debugger tuning options.
Follow-up commmit to r269827.
Thanks to Paul Robinson for pointing this out!
llvm-svn: 269840
As discovered in PR27758, GDB does not fully support the DWARF 4 format.
This patch ensures we always emit bitfields in the DWARF 2 when tuning for GDB.
llvm-svn: 269827
When processing inline asm that contains errors, make sure we can recover
gracefully by creating an UNDEF SDValue for the inline asm statement before
returning from SelectionDAGBuilder::visitInlineAsm. This is necessary for
consumers that don't exit on the first error that is emitted (e.g. clang)
and that would assert later on.
Fixes PR24071.
Patch by Diana Picus.
llvm-svn: 269811
Since r207518 they are printed exactly like non-hidden stubs on x86 and
since r207517 on ARM.
This means we can use a single set for all stubs in those platforms.
llvm-svn: 269776
PrologEpilogInserter has these 3 phases, which are related, but not
all of them are needed by all targets. This patch reorganizes PEI's
varous functions around those phases for more clear separation. It also
introduces a new TargetMachine hook, usesPhysRegsForPEI, which is true
for non-virtual targets. When it is true, all the phases operate as
before, and PEI requires the AllVRegsAllocated property on
MachineFunctions. Otherwise, CSR spilling and scavenging are skipped and
only prolog/epilog insertion/frame finalization is done.
Differential Revision: http://reviews.llvm.org/D18366
llvm-svn: 269750
The DWARF spec states that a member entry may have either a
DW_AT_data_member_location or a DW_AT_data_bit_offset, but not both.
This fixes a bug found in PR 27758.
llvm-svn: 269731
This code currently relies on static methods in ProfileSummary to determine whether a function is hot or unlikley. I am refactoring the ProfileSummary code and these methods will be removed. As discussed offline, the right way to re-introduce this is to add a pass to annotate functions with unlikely/hot hints and use the hints to determine the prefix here.
llvm-svn: 269726
The DWARF spec clearly states that a bit field member should have either a
DW_AT_byte_size or a DW_AT_bit_size, but not both.
Also the DW_AT_byte_size is redundant with the size of the type of the member.
This fixes a bug found in PR 27758.
llvm-svn: 269714
In practice only a few well known appending linkage variables work.
Currently if codegen sees an unknown appending linkage variable it will
just print it as a regular global. That is wrong as the symbol in the
produced object file has different semantics as the one provided by the
appending linkage.
This just errors early instead of producing a broken .o.
llvm-svn: 269706
Allow two users of the condition if the other user
is also a min/max select. i.e.
%c = icmp slt i32 %x, %y
%min = select i1 %c, i32 %x, i32 %y
%max = select i1 %c, i32 %y, i32 %x
llvm-svn: 269699
Summary: This way we can get rid of one of the fields in the .def file.
Reviewers: llvm-commits
Subscribers: zturner
Differential Revision: http://reviews.llvm.org/D20251
llvm-svn: 269461
For BITREVERSE, bit shifting/masking every bit in a vector element is a very lengthy procedure.
If the input vector type is a whole multiple of bytes wide then we can split this into a BSWAP shuffle stage (to reverse at the byte level) and then a BITREVERSE stage applied to each byte. Most vector capable targets can efficiently BSWAP using shuffles resulting in a considerable reduction in instructions.
With this patch targets would only need to implement a target specific vXi8 BITREVERSE implementation to efficiently reverse most legal vector types.
Differential Revision: http://reviews.llvm.org/D19978
llvm-svn: 269290
Currently cost based loop rotation algo can only be turned on with
two conditions: the function has real profile data, and -precise-rotation-cost
flag is turned on. This is not convenient for developers to experiment
when profile is not available. Add a new option to force the new
rotation algorithm -force-precise-rotation-cost
llvm-svn: 269266
This is to fix the bug in https://llvm.org/bugs/show_bug.cgi?id=27612.
When spill is hoisted to a BB with landingpad successor, and if the VNI
of the spill reg lives into the landingpad successor, the spill should be
inserted before the call which may throw exception. InsertPointAnalysis
is used to compute the safe insert point.
http://reviews.llvm.org/D20027 is a preparing patch for this patch.
Differential Revision: http://reviews.llvm.org/D19884.
llvm-svn: 269249
InsertPointAnalysis.
Because both split and spill hoisting want to use LastSplitPoint computation
result, extract the LastSplitPoint computation from SplitAnalysis class which
also contains a bunch of other analysises only related to split.
Differential Revision: http://reviews.llvm.org/D20027.
llvm-svn: 269248
It's awkward to force callers of SelectNodeTo to figure out whether
the node was morphed or CSE'd. Update uses here instead of requiring
callers to (sometimes) do it.
llvm-svn: 269235
This means SelectCode unconditionally returns nullptr now. I'll follow
up with a change to make that return void as well, but it seems best
to keep that one very mechanical.
This is part of the work to have Select return void instead of an
SDNode *, which is in turn part of llvm.org/pr26808.
llvm-svn: 269136
Usually subregister definitions are consider uses of the remaining
lanes that did not get defined. Add a comment why the code in
ScheduleDAGInstrs does not add use dependencies regardless.
llvm-svn: 269107
for the same subprogram.
This fixes a bug where DW_AT_abstract_origin is being emitted twice for
the same subprogram if a function is both inlined and emitted in the same
translation unit, by restoring the pre-r266446 behavior.
http://reviews.llvm.org/D20072
llvm-svn: 269103
Summary:
While setting kill flags on instructions inside a BUNDLE, we bail out as soon
as we set kill flag on a register. But we are missing a check when all the
registers already have the correct kill flag set. We need to bail out in that
case as well.
This patch refactors the old code and simply makes use of the addRegisterKilled
function in MachineInstr.cpp in order to determine whether to set/remove kill
on an instruction.
Reviewers: apazos, t.p.northover, pete, MatzeB
Subscribers: MatzeB, davide, llvm-commits
Differential Revision: http://reviews.llvm.org/D17356
llvm-svn: 269092
An example from Hexagon where things went wrong:
%R0<def> = L2_loadrigp <ga:@fp04> ; load function address
J2_callr %R0<kill>, ..., %R0<imp-def> ; call *R0, return value in R0
ScheduleDAGInstrs::buildSchedGraph would visit all instructions going
backwards, and in each instruction it would visit all operands in their
order on the operand list. In the case of this call, it visited the use
of R0 first, then removed it from the set Uses after it visited the def.
This caused the DAG to be missing the data dependence edge on R0 between
the load and the call.
Differential Revision: http://reviews.llvm.org/D20102
llvm-svn: 269076
Currently, SelectionDAG assumes 8/16-bit cmpxchg returns either a sign
extended result, or a zero extended result. SystemZ takes a third
option by returning junk in the high bits (rotated contents of the other
bytes in the memory word). In that case, don't use Assert*ext, and
zero-extend the result ourselves if a comparison is needed.
Differential Revision: http://reviews.llvm.org/D19800
llvm-svn: 269075
SystemZ (and probably other targets as well) can fold a memory operand
by changing the opcode into a new instruction that as a side-effect
also clobbers the CC-reg.
In order to do this, liveness of that reg must first be checked. When
LIS is passed, getRegUnit() can be called on it and the right
LiveRange is computed on demand.
Reviewed by Matthias Braun.
http://reviews.llvm.org/D19861
llvm-svn: 269026
We now use LiveRangeCalc::extendToUses() instead of a specially designed
algorithm in constructMainRangeFromSubranges():
- The original motivation for constructMainRangeFromSubranges() were
differences between the main liverange and subranges because of hidden
dead definitions. This case however cannot happen anymore with the
DetectDeadLaneMasks pass in place.
- It simplifies the code.
- This fixes a longstanding bug where we did not properly create new SSA
values on merging control flow (the MachineVerifier missed most of
these cases).
- Move constructMainRangeFromSubranges() to LiveIntervalAnalysis and
LiveRangeCalc to better match the implementation/available helper
functions.
llvm-svn: 269016
Move the register stackification and coloring passes to run very late, after
PEI, tail duplication, and most other passes. This means that all code emitted
and expanded by those passes is now exposed to these passes. This also
eliminates the need for prologue/epilogue code to be manually stackified,
which significantly simplifies the code.
This does require running LiveIntervals a second time. It's useful to think
of these late passes not as late optimization passes, but as a domain-specific
compression algorithm based on knowledge of liveness information. It's used to
compress the code after all conventional optimizations are complete, which is
why it uses LiveIntervals at a phase when actual optimization passes don't
typically need it.
Differential Revision: http://reviews.llvm.org/D20075
llvm-svn: 269012
Many files include Passes.h but only a fraction needs to know about the
TargetPassConfig class. Move it into an own header. Also rename
Passes.cpp to TargetPassConfig.cpp while we are at it.
llvm-svn: 269011
Add convenience function to create MachineModuleInfo and
MachineFunctionAnalysis passes and add them to a pass manager.
Despite factoring out some shared code in
LiveIntervalTest/LLVMTargetMachine this will be used by my upcoming llc
change.
llvm-svn: 269002
After looking at D19087 again, it occurred to me that we can do better. If we consolidate
the valueHasExactlyOneBitSet() transforms, we won't incur extra overhead from calling it a
2nd time, and we can shrink SimplifySetCC() a bit. No functional change intended.
Differential Revision: http://reviews.llvm.org/D20050
llvm-svn: 268932
In case of COPY-like instruction we may be able to deduce that a certain
input is unused, based on the used lanes of the register defined by the
instruction.
This even works accross otherwise incompatible copies (no need to have
compatible lanemasks, completely unused operands are still completely
unused). It even makes sense to redo the analysis in this case since we
gained information for a case we previously stopped at because of the
incompatible masks.
llvm-svn: 268815
Relying on the caller to clean up after we've replaced all uses of a
node won't work when we've migrated to the `void Select(...)` API.
llvm-svn: 268774
If we don't, values that aren't precisely representable in f16 could
be used as-is in a promoted f32 operation, which would produce
incorrect results.
AArch64 had the correct behavior; add a focused test.
Fixes http://llvm.org/PR26871
llvm-svn: 268700
This is a step towards removing the rampant undefined behaviour in
SelectionDAG, which is a part of llvm.org/PR26808.
We rename SelectionDAGISel::Select to SelectImpl and update targets to
match, and then change Select to return void and consolidate the
sketchy behaviour we're trying to get away from there.
Next, we'll update backends to implement `void Select(...)` instead of
SelectImpl and eventually drop the base Select implementation.
llvm-svn: 268693
This opcode never happens in practice, and yet the logic we have in
place to handle it would be undefined behaviour if we ever executed
it. Remove it rather than trying to refactor code that's never
reached.
llvm-svn: 268692
Some vector bit operations are promoted instead of having custom lowering. This patch changes the isOperationLegalOrCustom tests for vector AND/OR operations to use a new TLI helper isOperationLegalOrCustomOrPromote instead, allowing the SSE implementations to stay on the simd unit.
Differential Revision: http://reviews.llvm.org/D19805
llvm-svn: 268561
Vector bit operations are typically promoted instead of having custom lowering. This patch changes the isOperationLegalOrCustom tests for vector AND/OR operations to use isOperationLegalOrPromote instead, allowing the SSE implementations to stay on the simd unit.
Differential Revision: http://reviews.llvm.org/D19805
llvm-svn: 268504
The replaced load may have implicit-defs and those defs may be used
in the block of the original load. Make sure to update the liveness
accordingly.
This is a generalization of r267817.
llvm-svn: 268412
Remove the AddPristinesAndCSRs parameters from
addLiveIns()/addLiveOuts().
We need to respect pristine registers after prologue epilogue insertion,
Seeing that we got this wrong in at least two commits already, we should
rather pay the small price to query MachineFrameInfo for it.
There are three cases that did not set AddPristineAndCSRs to true even
after register allocation:
- ExecutionDepsFix: live-out registers are used as a hint that the
register is used soon. This is not true for pristine registers so
use the new addLiveOutsNoPristines() to maintain this behaviour.
- SystemZShortenInst: Not setting AddPristineAndCSRs to true looks like
a bug, should do the right thing automatically now.
- StackMapLivenessAnalysis: Not adding pristine registers looks like a
bug to me. Added a FIXME comment but maintain the current behaviour
as a change may need to get coordinated with GC runtimes.
llvm-svn: 268336
Summary:
This adds a unique ID to the COFF section uniquing map, similar to the
one we have for ELF. The unique id is not currently exposed via the
assembler because we don't have a use case for it yet. Users generally
create .pdata with the .seh_* family of directives, and the assembler
internally needs to produce .pdata and .xdata sections corresponding to
the code section.
The association between .text sections and the assembler-created .xdata
and .pdata sections is maintained as an ID field of MCSectionCOFF. The
CFI-related sections are created with the given unique ID, so if more
code is added to the same text section, we can find and reuse the CFI
sections that were already created.
Reviewers: majnemer, rafael
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D19376
llvm-svn: 268331
After the layout of the basic blocks is set, the target may be able to get rid
of unconditional branches to fallthrough blocks that the generic code does not
catch. This happens any time TargetInstrInfo::AnalyzeBranch is not able to
analyze all the branches involved in the terminators sequence, while still
understanding a few of them.
In such situation, AnalyzeBranch can directly modify the branches if it has been
instructed to do so.
This patch takes advantage of that.
llvm-svn: 268328
This operation may branch to the handler block and we do not want it
to happen anywhere within the basic block.
Moreover, by marking it "terminator and branch" the machine verifier
does not wrongly assume (because of AnalyzeBranch not knowing better)
the branch is analyzable. Indeed, the target was seeing only the
unconditional branch and not the faulting load op and thought it was
a simple unconditional block.
The machine verifier was complaining because of that and moreover,
other optimizations could have done wrong transformation!
In the process, simplify the representation of the handler block in
the faulting load op. Now, we directly reference the handler block
instead of using a label. This has the benefits of:
1. MC knows how to issue a label for a BB, so leave that to it.
2. Accessing the target BB from its label is painful, whereas it is
direct from a MBB operand.
Note: The 2 bytes offset in implicit-null-check.ll comes from the
fact the unconditional jumps are not removed anymore, as the whole
terminator sequence is not analyzable anymore.
Will fix it in a subsequence commit.
llvm-svn: 268327
Summary:
When SelectionDAG performs CSE it is possible that the context's source
location is different from that of the selected node. This can lead to
incorrect line number records. We update the debug location to the
one that occurs earlier in the instruction sequence.
This fixes PR21006.
Reviewers: echristo, sdmitrouk
Subscribers: jevinskie, asl, llvm-commits
Differential Revision: http://reviews.llvm.org/D12094
llvm-svn: 268323
Summary:
Historically, we had a switch in the Makefiles for turning on "expensive
checks". This has never been ported to the cmake build, but the
(dead-ish) code is still around.
This will also make it easier to turn it on in buildbots.
Reviewers: chandlerc
Subscribers: jyknight, mzolotukhin, RKSimon, gberry, llvm-commits
Differential Revision: http://reviews.llvm.org/D19723
llvm-svn: 268050
In case of missing live intervals for a physical registers
getLanesWithProperty() would report 0 which was not a safe default in
all situations. Add a parameter to pass in a safe default.
No testcase because in-tree targets do not skip computing register unit
live intervals.
Also cleanup the getXXX() functions to not perform the
RequireLiveIntervals checks anymore so we do not even need to return
safe defaults.
llvm-svn: 267977
With the DetectDeadLanes pass in place we cannot run into situations
anymore where defs suddenly become dead.
Also add a missing check so we do not try to add an undef flag to a
physreg (found by visual inspection, no failing test).
llvm-svn: 267976
This requirement was a huge hack to keep LiveVariables alive because it
was optionally used by TwoAddressInstructionPass and PHIElimination.
However we have AnalysisUsage::addUsedIfAvailable() which we can use in
those passes.
This re-applies r260806 with LiveVariables manually added to PowerPC to
hopefully not break the stage 2 bots this time.
llvm-svn: 267954
The DetectDeadLaneMask already ensures that we have no dead subregister
definitions making the special handling in LiveIntervalAnalysis
unnecessary. This reverts most of r248335.
llvm-svn: 267937
ScheduleDAGMI::initQueues changes the RegionBegin to the first non-debug
instruction. Since it does not track register pressure, it does not affect
any RP trackers. ScheduleDAGMILive inherits initQueues from ScheduleDAGMI,
and it does reset the TopTPTracker in its schedule method. Any derived,
target-specific scheduler will need to do it as well, but the TopRPTracker
is only exposed as a "const" object to derived classes. Without the ability
to modify the tracker directly, this leaves a derived scheduler with a
potential of having the TopRPTracker out-of-sync with the CurrentTop.
The symptom of the problem:
void llvm::ScheduleDAGMILive::scheduleMI(llvm::SUnit *, bool):
Assertion `TopRPTracker.getPos() == CurrentTop && "out of sync"' failed.
Differential Revision: http://reviews.llvm.org/D19438
llvm-svn: 267918
The DWARF2 specification of DW_AT_bit_offset is ambiguous for
little-endian machines, but by restoring to the old behavior
we match what debuggers expect and what other popular compilers
generate.
llvm-svn: 267896
The DWARF2 specification of DW_AT_bit_offset was written from the perspective of
a big-endian machine with unclear semantics for other systems. DWARF4
deprecated DW_AT_bit_offset and introduced a new attribute DW_AT_data_bit_offset
that simply counts the number of bits from the beginning of the containing
entity regardless of endianness.
After this patch LLVM emits DW_AT_bit_offset for DWARF 2 or 3 and
DW_AT_data_bit_offset when DWARF 4 or later is requested.
llvm-svn: 267895
The DetectDeadLanes pass performs a dataflow analysis of used/defined
subregister lanes across COPY instructions and instructions that will
get lowered to copies. It detects dead definitions and uses reading
undefined values which are obscured by COPY and subregister usage.
These dead definitions cause trouble in the register coalescer which
cannot deal with definitions suddenly becoming dead after coalescing
COPY instructions.
For now the pass only adds dead and undef flags to machine operands. It
should be possible to extend it in the future to remove the dead
instructions and redo the analysis for the affected virtual
registers.
Differential Revision: http://reviews.llvm.org/D18427
llvm-svn: 267851
handleMove() was incorrectly swapping two value numbers. This was missed
before because the problem only occured when moving subregister definitions
and needed -verify-machineinstrs to be detected.
I cannot add a testcase as long as I cannot reapply r260905/r260806.
llvm-svn: 267840
We basically replace:
HoistBB:
cond_br NullBB, NotNullBB
NullBB:
...
NotNullBB:
<reg> = load
into
HoistBB
<reg> = load_faulting_op NullBB
uncond_br NotNullBB
NullBB:
...
NotNullBB: ## <reg> is now live-in of NotNullBB
...
This partially fixes the machine verifier error for
test/CodeGen/X86/implicit-null-check.ll, but it still fails because
of the implicit CFG structure.
llvm-svn: 267817
The sink cast machinery is supposed to sink casts as close to their user
as possible. However, an EH pad is the first instruction in it's basic
block. Don't sink if the user is an EH pad.
This fixes PR27536.
llvm-svn: 267767
Summary:
Refactor debugging routines to reduce code duplication. Remove a couple
of #include's that were not needed. Don't require MachineDominator as a
prereq for this pass (not needed).
These changes split off from http://reviews.llvm.org/D18827.
Reviewers: wmi, gbiv, qcolombet
Subscribers: llvm-commits, davidxl, jevinskie
Differential Revision: http://reviews.llvm.org/D18992
llvm-svn: 267766
is defined!
The users were checking the proper thing (Defined + PartialDeadDef), but the
information may have been wrong for other use cases, so fix that.
llvm-svn: 267641
When a block is tail-duplicated, the PHI nodes from that block are
replaced with appropriate COPY instructions. When those PHI nodes
contained use operands with subregisters, the subregisters were
dropped from the COPY instructions, resulting in incorrect code.
Keep track of the subregister information and use this information
when remapping instructions from the duplicated block.
Differential Revision: http://reviews.llvm.org/D19337
llvm-svn: 267583
This is part of solving PR27344:
https://llvm.org/bugs/show_bug.cgi?id=27344
CGP should undo the SimplifyCFG transform for the same reason that earlier patches have used this
same mechanism: it's possible that passes between SimplifyCFG and CGP may be able to optimize the
IR further with a select in place.
For the TLI hook default, >99% taken or not taken is chosen as the default threshold for a highly
predictable branch. Even the most limited HW branch predictors will be correct on this branch almost
all the time, so even a massive mispredict penalty perf loss would be overcome by the win from all
the times the branch was predicted correctly.
As a follow-up, we could make the default target hook less conservative by using the SchedMachineModel's
MispredictPenalty. Or we could just let targets override the default by implementing the hook with that
and other target-specific options. Note that trying to statically determine mispredict rates for
close-to-balanced profile weight data is generally impossible if the HW is sufficiently advanced. Ie,
50/50 taken/not-taken might still be 100% predictable.
Finally, note that this patch as-is will not solve PR27344 because the current __builtin_unpredictable()
branch weight default values are 4 and 64. A proposal to change that is in D19435.
Differential Revision: http://reviews.llvm.org/D19488
llvm-svn: 267572
visitAND, when folding and (load) forgets to check which output of
an indexed load is involved, happily folding the updated address
output on the following testcase:
target datalayout = "e-m:e-i64:64-n32:64"
target triple = "powerpc64le-unknown-linux-gnu"
%typ = type { i32, i32 }
define signext i32 @_Z8access_pP1Tc(%typ* %p, i8 zeroext %type) {
%b = getelementptr inbounds %typ, %typ* %p, i64 0, i32 1
%1 = load i32, i32* %b, align 4
%2 = ptrtoint i32* %b to i64
%3 = and i64 %2, -35184372088833
%4 = inttoptr i64 %3 to i32*
%_msld = load i32, i32* %4, align 4
%zzz = add i32 %1, %_msld
ret i32 %zzz
}
Fix this by checking ResNo.
I've found a few more places that currently neglect to check for
indexed load, and tightened them up as well, but I don't have test
cases for them. In fact, they might not be triggerable at all,
at least with current targets. Still, better safe than sorry.
Differential Revision: http://reviews.llvm.org/D19202
llvm-svn: 267420
We didn't have logic to correctly handle CFGs where there was more than
one EH-pad successor (these are novel with WinEH).
There were situations where a register was live in one exceptional
successor but not another but the code as written would only consider
the first exceptional successor it found.
This resulted in split points which were insufficiently early if an
invoke was present.
This fixes PR27501.
N.B. This removes getLandingPadSuccessor.
llvm-svn: 267412
The original patch caused crashes because it could derefence a null pointer
for SelectionDAGTargetInfo for targets that do not define it.
Evaluates fmul+fadd -> fmadd combines and similar code sequences in the
machine combiner. It adds support for float and double similar to the existing
integer implementation. The key features are:
- DAGCombiner checks whether it should combine greedily or let the machine
combiner do the evaluation. This is only supported on ARM64.
- It gives preference to throughput over latency: the heuristic used is
to combine always in loops. The targets decides whether the machine
combiner should optimize for throughput or latency.
- Supports for fmadd, f(n)msub, fmla, fmls patterns
- On by default at O3 ffast-math
llvm-svn: 267328
Eliminate DITypeIdentifierMap and make DITypeRef a thin wrapper around
DIType*. It is no longer legal to refer to a DICompositeType by its
'identifier:', and DIBuilder no longer retains all types with an
'identifier:' automatically.
Aside from the bitcode upgrade, this is mainly removing logic to resolve
an MDString-based reference to an actualy DIType. The commits leading
up to this have made the implicit type map in DICompileUnit's
'retainedTypes:' field superfluous.
This does not remove DITypeRef, DIScopeRef, DINodeRef, and
DITypeRefArray, or stop using them in DI-related metadata. Although as
of this commit they aren't serving a useful purpose, there are patchces
under review to reuse them for CodeView support.
The tests in LLVM were updated with deref-typerefs.sh, which is attached
to the thread "[RFC] Lazy-loading of debug info metadata":
http://lists.llvm.org/pipermail/llvm-dev/2016-April/098318.html
llvm-svn: 267296
The original commit was reverted because of a buildbot problem with LazyCallGraph::SCC handling (not related to the OptBisect handling).
Differential Revision: http://reviews.llvm.org/D19172
llvm-svn: 267231
This intrinsic takes two arguments, ``%ptr`` and ``%offset``. It loads
a 32-bit value from the address ``%ptr + %offset``, adds ``%ptr`` to that
value and returns it. The constant folder specifically recognizes the form of
this intrinsic and the constant initializers it may load from; if a loaded
constant initializer is known to have the form ``i32 trunc(x - %ptr)``,
the intrinsic call is folded to ``x``.
LLVM provides that the calculation of such a constant initializer will
not overflow at link time under the medium code model if ``x`` is an
``unnamed_addr`` function. However, it does not provide this guarantee for
a constant initializer folded into a function body. This intrinsic can be
used to avoid the possibility of overflows when loading from such a constant.
Differential Revision: http://reviews.llvm.org/D18367
llvm-svn: 267223
The relative vtable ABI (PR26723) needs PLT relocations to refer to virtual
functions defined in other DSOs. The unnamed_addr attribute means that the
function's address is not significant, so we're allowed to substitute it
with the address of a PLT entry.
Also includes a bonus feature: addends for COFF image-relative references.
Differential Revision: http://reviews.llvm.org/D17938
llvm-svn: 267211
Avoid quadratic complexity in unusually large basic blocks by limiting
the size of the ready lists.
Differential Revision: http://reviews.llvm.org/D19349
llvm-svn: 267189
Summary:
This new pass allows targets to use the hazard recognizer without having
to also run one of the schedulers. This is useful when compiling with
optimizations disabled for targets that still need noop hazards
to be handled correctly.
Reviewers: hfinkel, atrick
Subscribers: arsenm, llvm-commits
Differential Revision: http://reviews.llvm.org/D18594
llvm-svn: 267156
Summary:
This intrinsic returns true if the current thread belongs to a live pixel
and false if it belongs to a pixel that we are executing only for derivative
computation. It will be used by Mesa to implement gl_HelperInvocation.
Note that for pixels that are killed during the shader, this implementation
also returns true, but it doesn't matter because those pixels are always
disabled in the EXEC mask.
This unearthed a corner case in the instruction verifier, which complained
about a v_cndmask 0, 1, exec, exec<imp-use> instruction. That's stupid but
correct code, so make the verifier accept it as such.
Reviewers: arsenm, tstellarAMD
Subscribers: arsenm, llvm-commits
Differential Revision: http://reviews.llvm.org/D19191
llvm-svn: 267102
Evaluates fmul+fadd -> fmadd combines and similar code sequences in the
machine combiner. It adds support for float and double similar to the existing
integer implementation. The key features are:
- DAGCombiner checks whether it should combine greedily or let the machine
combiner do the evaluation. This is only supported on ARM64.
- It gives preference to throughput over latency: the heuristic used is
to combine always in loops. The targets decides whether the machine
combiner should optimize for throughput or latency.
- Supports for fmadd, f(n)msub, fmla, fmls patterns
- On by default at O3 ffast-math
llvm-svn: 267098
When printing the properties required by a pass, only print the
properties that are set, and not those that are clear (only properties
that are set are verified, clear properties are "don't-care").
llvm-svn: 267070
splitting edges.
MachineBasicBlock::SplitCriticalEdges will crash if a nullptr would have
been passed for the Pass argument. Do not allow that by turning this
argument into a reference.
The alternative would have been to make the Pass a truly optional
argument, but although this is easy to do, I was afraid users using it
like this would not be aware the livness information, dominator tree and
such would silently be broken.
llvm-svn: 267052
Introduce canSplitCriticalEdge, so that clients can now query whether or
not a critical edge can be split without actually needing to split it.
This may be useful when gathering information for cost models for
instance.
llvm-svn: 267046
When custom lowered, this is not called if the store is custom
lowered. Move it to be a utility function so targets can
easily expand unaligned accesses when custom lowering.
llvm-svn: 267029
Instead of holding a mask, hold two value: the start index and the
length of the mapping. This is a more compact representation, although
less powerful. That being said, arbitrary masks would not have worked
for the generic so do not allow them in the first place.
llvm-svn: 267025
This patch implements a optimization bisect feature, which will allow optimizations to be selectively disabled at compile time in order to track down test failures that are caused by incorrect optimizations.
The bisection is enabled using a new command line option (-opt-bisect-limit). Individual passes that may be skipped call the OptBisect object (via an LLVMContext) to see if they should be skipped based on the bisect limit. A finer level of control (disabling individual transformations) can be managed through an addition OptBisect method, but this is not yet used.
The skip checking in this implementation is based on (and replaces) the skipOptnoneFunction check. Where that check was being called, a new call has been inserted in its place which checks the bisect limit and the optnone attribute. A new function call has been added for module and SCC passes that behaves in a similar way.
Differential Revision: http://reviews.llvm.org/D19172
llvm-svn: 267022
Before this fix, DILexicalBlockFile entries were skipped only in some cases and were not in other cases.
Differential Revision: http://reviews.llvm.org/D18724
llvm-svn: 267004
With this change, ideally IR pass can always generate llvm.stackguard
call to get the stack guard; but for now there are still IR form stack
guard customizations around (see getIRStackGuard()). Future SSP
customization should go through LOAD_STACK_GUARD.
There is a behavior change: stack guard values are not CSEed anymore,
since we should never reuse the value in case that it has been spilled (and
corrupted). See ssp-guard-spill.ll. This also cause the change of stack
size and codegen in X86 and AArch64 test cases.
Ideally we'd like to know if the guard created in llvm.stackprotector() gets
spilled or not. If the value is spilled, discard the value and reload
stack guard; otherwise reuse the value. This can be done by teaching
register allocator to know how to rematerialize LOAD_STACK_GUARD and
force a rematerialization (which seems hard), or check for spilling in
expandPostRAPseudo. It only makes sense when the stack guard is a global
variable, which requires more instructions to load. Anyway, this seems to go out
of the scope of the current patch.
llvm-svn: 266806
Summary:
The `"patchable-function"` attribute can be used by an LLVM client to
influence LLVM's code generation in ways that makes the generated code
easily patchable at runtime (for instance, to redirect control).
Right now only one patchability scheme is supported,
`"prologue-short-redirect"`, but this can be expanded in the future.
Reviewers: joker.eph, rnk, echristo, dberris
Subscribers: joker.eph, echristo, mcrosier, llvm-commits
Differential Revision: http://reviews.llvm.org/D19046
llvm-svn: 266715
When we suppress linkage names, for a non-inlined subprogram the name
can still be found in the object-file symbol table, because we have
the code address of the subprogram. This is not necessarily the case
for an inlined subprogram, so we still want to emit the linkage name
in the DWARF. Put this on the abstract-origin DIE because it's common
to all inlined instances.
Differential Revision: http://reviews.llvm.org/D18706
llvm-svn: 266692
Removed some unused headers, replaced some headers with forward class declarations.
Found using simple scripts like this one:
clear && ack --cpp -l '#include "llvm/ADT/IndexedMap.h"' | xargs grep -L 'IndexedMap[<]' | xargs grep -n --color=auto 'IndexedMap'
Patch by Eugene Kosov <claprix@yandex.ru>
Differential Revision: http://reviews.llvm.org/D19219
From: Mehdi Amini <mehdi.amini@apple.com>
llvm-svn: 266595
1) We need to add this flag prior to adding any other, in case the user has
specified a -fmodule-cache-path= flag in their custom CXXFLAGS. Such a flag
causes -Werror builds to fail, and thus all config checks fail, until we add
the corresponding -fmodules flag. The modules selfhost bot does this, for
instance.
2) Delete module maps that were putting .cpp files into modules.
3) Enable -fmodules-local-submodule-visibility, to get proper module
visibility rules applied across submodules of the same module. Disable
-fmodules for C builds, since that flag is not available there.
llvm-svn: 266502
Because HoistSpillHelper::hoistAllSpills is called in postOptimization, before the
patch we didn't want LiveRangeEdit::eliminateDeadDefs to call splitSeparateComponents
and generate unassigned new vregs. However, skipping splitSeparateComponents will make
verify-machineinstrs unhappy, so I remove the early return, and use
HoistSpillHelper::LRE_DidCloneVirtReg to assign physreg/stackslot for those new vregs.
In addition, some code reorganization to make class HoistSpillHelper privately inheriting
from LiveRangeEdit::Delegate possible. This is to be consistent with class RAGreedy and
class RegisterCoalescer.
Differential Revision: http://reviews.llvm.org/D19142
llvm-svn: 266489
After r245976, LLVM will skip the last bit test case if knows it will always be
true. However, we would still erroneously update PHI nodes with incoming values
from the MBB that would perform the final bit test, causing -verify-machineinstrs
to fail.
llvm-svn: 266479
This is a recommit of r266390 with a fix that will allow tests to pass
(hopefully). Before we got a StringRef to M->getTargetTriple() and right
after we moved the Module so we were referencing a dangling object.
llvm-svn: 266456
Currently each Function points to a DISubprogram and DISubprogram has a
scope field. For member functions the scope is a DICompositeType. DIScopes
point to the DICompileUnit to facilitate type uniquing.
Distinct DISubprograms (with isDefinition: true) are not part of the type
hierarchy and cannot be uniqued. This change removes the subprograms
list from DICompileUnit and instead adds a pointer to the owning compile
unit to distinct DISubprograms. This would make it easy for ThinLTO to
strip unneeded DISubprograms and their transitively referenced debug info.
Motivation
----------
Materializing DISubprograms is currently the most expensive operation when
doing a ThinLTO build of clang.
We want the DISubprogram to be stored in a separate Bitcode block (or the
same block as the function body) so we can avoid having to expensively
deserialize all DISubprograms together with the global metadata. If a
function has been inlined into another subprogram we need to store a
reference the block containing the inlined subprogram.
Attached to https://llvm.org/bugs/show_bug.cgi?id=27284 is a python script
that updates LLVM IR testcases to the new format.
http://reviews.llvm.org/D19034
<rdar://problem/25256815>
llvm-svn: 266446
Perform store clustering just like load clustering. This change add
StoreClusterMutation in machine-scheduler. To control StoreClusterMutation,
added enableClusterStores() in TargetInstrInfo.h. This is enabled only on
AArch64 for now.
This change also add support for unscaled stores which were not handled in
getMemOpBaseRegImmOfs().
llvm-svn: 266437
It's unsafe to duplicate blocks that contain convergent instructions
during ifcnv. See the patch for details.
Reviewers: hfinkel
Differential Revision: http://reviews.llvm.org/D17518
llvm-svn: 266404
This will be used in lld to avoid creating TargetMachine in two
different places. See D18999 for a more detailed discussion.
Differential Revision: http://reviews.llvm.org/D19139
llvm-svn: 266390
Summary:
Re-factor some code to improve clarity and style based on review
comments from http://reviews.llvm.org/D18093.
Reviewers: MatzeB, mcrosier
Subscribers: MatzeB, mcrosier, llvm-commits
Differential Revision: http://reviews.llvm.org/D19128
llvm-svn: 266372
MachineInstr.h and MachineInstrBuilder.h are very popular headers,
widely included across all LLVM backends. It turns out that there only a
handful of TUs that actually care about DI operands on MachineInstrs.
After this change, touching DebugInfoMetadata.h and rebuilding llc only
needs 112 actions instead of 542.
llvm-svn: 266351
The behavior of {MIN,MAX}NAN differs from that of {MIN,MAX}NUM when only
one of the inputs is NaN: -NUM will return the non-NaN argument while
-NAN would return NaN.
It is desirable to lower to @llvm.{min,max}num to -NAN if they don't
have a native instruction for -NUM. Notably, ARMv7 NEON's vmin has the
-NAN semantics.
N.B. Of course, it is only safe to do this if the intrinsic call is
marked nnan.
llvm-svn: 266279
This patch fixes a bug (PR26827) when using anti-aliasing in store
merging. This sets the chain users of the component stores to point to
the new store instead of the component stores chain parent.
Reviewers: jyknight
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D18909
llvm-svn: 266217
This patch fixes calculating of builtin_object_size if it depends on a
condition. Before this patch compiler did not know how to calculate the
object size when it finds a condition that cannot be eliminated.
This patch enables calculating of builtin_object_size even in case when
condition cannot be eliminated by choosing minimum or maximum value as a
result from condition. Choosing minimum or maximum value from condition
is based on the second argument of __builtin_object_size function.
Patch by Strahinja Petrovic.
Differential Revision: http://reviews.llvm.org/D18438
llvm-svn: 266193
two fixes with one about error verify-regalloc reported, and
another about live range update of phi after rematerialization.
r265547:
Replace analyzeSiblingValues with new algorithm to fix its compile
time issue. The patch is to solve PR17409 and its duplicates.
analyzeSiblingValues is a N x N complexity algorithm where N is
the number of siblings generated by reg splitting. Although it
causes siginificant compile time issue when N is large, it is also
important for performance since it removes redundent spills and
enables rematerialization.
To solve the compile time issue, the patch removes analyzeSiblingValues
and replaces it with lower cost alternatives containing two parts. The
first part creates a new spill hoisting method in postOptimization of
register allocation. It does spill hoisting at once after all the spills
are generated instead of inside every instance of selectOrSplit. The
second part queries the define expr of the original register for
rematerializaiton and keep it always available during register allocation
even if it is already dead. It deletes those dead instructions only in
postOptimization. With the two parts in the patch, it can remove
analyzeSiblingValues without sacrificing performance.
Patches on top of r265547:
r265610 "Fix the compare-clang diff error introduced by r265547."
r265639 "Fix the sanitizer bootstrap error in r265547."
r265657 "InlineSpiller.cpp: Escap \@ in r265547. [-Wdocumentation]"
Differential Revision: http://reviews.llvm.org/D15302
Differential Revision: http://reviews.llvm.org/D18934
Differential Revision: http://reviews.llvm.org/D18935
Differential Revision: http://reviews.llvm.org/D18936
llvm-svn: 266162
This state is no longer useful and not guaranteed to be valid in later
codegen passes. For example, see the added test, which would print a
savepoint of %bb.-1 without this change, and crashes with a
use-after-free error under ASan if you apply the recycling allocator
patch from llvm.org/PR26808.
llvm-svn: 266150
(Recommit of r266002, with r266011, r266016, and not accidentally
including an extra unused/uninitialized element in LibcallRoutineNames)
AtomicExpandPass can now lower atomic load, atomic store, atomicrmw, and
cmpxchg instructions to __atomic_* library calls, when the target
doesn't support atomics of a given size.
This is the first step towards moving all atomic lowering from clang
into llvm. When all is done, the behavior of __sync_* builtins,
__atomic_* builtins, and C11 atomics will be unified.
Previously LLVM would pass everything through to the ISelLowering
code. There, unsupported atomic instructions would turn into __sync_*
library calls. Because of that behavior, Clang currently avoids emitting
llvm IR atomic instructions when this would happen, and emits __atomic_*
library functions itself, in the frontend.
This change makes LLVM able to emit __atomic_* libcalls, and thus will
eventually allow clang to depend on LLVM to do the right thing.
It is advantageous to do the new lowering to atomic libcalls in
AtomicExpandPass, before ISel time, because it's important that all
atomic operations for a given size either lower to __atomic_*
libcalls (which may use locks), or native instructions which won't. No
mixing and matching.
At the moment, this code is enabled only for SPARC, as a
demonstration. The next commit will expand support to all of the other
targets.
Differential Revision: http://reviews.llvm.org/D18200
llvm-svn: 266115
This code was specific to vector operations with scalar operands:
all the opcodes in FoldValue (via FoldConstantArithmetic) can't
match those criteria.
Replace it with an assert if that ever changes: at that point,
we might need to add back a splat BUILD_VECTOR.
llvm-svn: 266100
Previously, we were using isGCRelocate predicates. Using a subclass of IntrinsicInst is far more idiomatic. The refactoring also enables a couple of minor simplifications and code sharing.
llvm-svn: 266098
Summary:
In getUnderlyingObjectsForInstr(): Don't give up on instructions with
multiple MMOs, instead look through all the MMOs and if they all meet
the conservative criteria previously used for single MMO instructions,
then return all of the underlying objects derived from the MMOs.
The change to ScheduleDAGInstrs::buildSchedGraph() is needed to avoid
the case where multiple underlying objects are present and are related
in such a way that successive iterations of the loop end up adding a
dependency from an instruction to itself.
Reviewers: atrick, hfinkel
Subscribers: MatzeB, mcrosier, llvm-commits
Differential Revision: http://reviews.llvm.org/D18093
llvm-svn: 266084
Dan Gohman