We're currently losing any fast-math flags when synthesizing fcmps for
min/max reductions. In LV, make sure we copy over the scalar inst's
flags. In LoopUtils, we know we only ever match patterns with
hasUnsafeAlgebra, so apply that to any synthesized ops.
llvm-svn: 248201
evaluate whether 'readonly' or 'readnone' apply to a given function.
This both reduces indentation and will make it easy to share the logic
with a new pass manager implementation.
llvm-svn: 248181
Because -indvars widens induction variables through arithmetic,
`NeverNegative` cannot be a property of the `WidenIV` (a `WidenIV`
manages information for all transitive uses of an IV being widened,
including uses of `-1 * IV`). Instead it must live on `NarrowIVDefUse`
which manages information for a specific def-use edge in the transitive
use list of an induction variable.
This change also adds a test case that demonstrates the problem with
r248045.
llvm-svn: 248107
Summary:
If an induction variable is provably non-negative, its sign extension is
equal to its zero extension. This means narrow uses like
icmp slt iNarrow %indvar, %rhs
can be widened into
icmp slt iWide zext(%indvar), sext(%rhs)
Reviewers: atrick, mcrosier, hfinkel
Subscribers: hfinkel, reames, llvm-commits
Differential Revision: http://reviews.llvm.org/D12745
llvm-svn: 248045
The SSE4A instructions EXTRQ/INSERTQ only use the lower 64-bits (or less) for many of their input vector operands and all of them have undefined upper 64-bits results.
Differential Revision: http://reviews.llvm.org/D12680
llvm-svn: 247934
Summary:
`signum(x)` is sometimes implemented as `(x >> 63) | (-x >>> 63)` (for
an `i64` `x`). This change adds a matcher for that pattern, and an
instcombine rule to optimize `signum(x) s< 1`.
Later, we can also consider optimizing:
icmp slt signum(x), 0 --> icmp slt x, 0
icmp sle signum(x), 1 --> true
etc.
Reviewers: majnemer
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D12703
llvm-svn: 247846
This patch adds support for msan on aarch64-linux for both 39 and
42-bit VMA. The support is enabled by defining the
SANITIZER_AARCH64_VMA compiler flag to either 39 or 42 at build time
for both clang/llvm and compiler-rt. The default VMA is 39 bits.
llvm-svn: 247807
We only checked that a global is initialized with constants, which is
incorrect. We should be checking that GlobalVariable *is* a constant,
not just initialized with it.
llvm-svn: 247769
In `IndVarSimplify::ExpandSCEVIfNeeded`,
`SCEVExpander::findExistingExpansion` may return an `llvm::Value` that
differs in type from the SCEV it was asked to find an expansion for (but
computes the same value). In such cases, we fall back on
`expandCodeFor`; and rely on LLVM to CSE the two equivalent
expressions (different only by a no-op cast) into a single computation.
I tried a few other approaches to fixing PR24783, all of which turned
out to be more complex than this current version:
1. Move the `ExpandSCEVIfNeeded` logic into `expandCodeFor`. This got
problematic because currently we do not pass in the `Loop *` into
`expandCodeFor`. Changing the interface to do this is a more
invasive change, and really does not make much semantic sense unless
the SCEV being passed in is an add recurrence.
There is also the problem of `expandCodeFor` being used in places
other than `indvars` -- there may be performance / correctness
issues elsewhere if `expandCodeFor` is moved from always generating
IR from scratch to cache-like model.
2. Have `findExistingExpansion` only return expression with the correct
type. This would make `isHighCostExpansionHelper` and thus
`isHighCostExpansion` more conservative than necessary.
3. Insert casts on the value returned by `findExistingExpansion` if
needed using `InsertNoopCastOfTo`. This is complicated because
`InsertNoopCastOfTo` depends on internal state of its
`SCEVExpander` (specifically `Builder.GetInserPoint()`), and this
may not be set up when `ExpandSCEVIfNeeded` is called.
4. Manually insert casts on the value returned by
`findExistingExpansion` if needed using `InsertNoopCastOfTo` via
`CastInst::Create`. This is probably workable, but figuring out the
location where the cast instruction needs to be inserted has enough
edge cases (arguments, constants, invokes, LCSSA must be preserved)
makes me feel what I have right now is simplest solution.
llvm-svn: 247749
These sections contain pointers to function that should be invoked
during startup/shutdown by __libc_csu_init and __libc_csu_fini.
Instrumenting these globals will append redzone to them, which will be
filled with zeroes. This will cause null pointer dereference at runtime.
Merge ASan regression tests for globals that should be ignored by
instrumentation pass.
llvm-svn: 247734
The patch extends the optimization to cases where the constant's
magnitude is so small or large that the rounding of the conversion
is irrelevant. The "so small" case includes negative zero.
Differential review: http://reviews.llvm.org/D11210
llvm-svn: 247708
LazuValueInfo can prove that value is nonnull based on the context information.
Make use of this ability to infer nonnull attributes for the call arguments.
Differential Revision: http://reviews.llvm.org/D12836
llvm-svn: 247707
Summary:
This change lets a `PlaceSafepoints` client change how wide the trip
count of a loop has to be for the loop to be considerd "counted", via
`CountedLoopTripWidth`. It also removes the boolean `SkipCounted` flag
and the `upperTripBound` constant -- we can get the old behavior of
`SkipCounted` == `false` by setting `CountedLoopTripWidth` to `13` (2 ^
13 == 8192).
Reviewers: reames
Subscribers: llvm-commits, sanjoy
Differential Revision: http://reviews.llvm.org/D12789
llvm-svn: 247656
Summary: This patch replaces isKnownNonNull() with isKnownNonNullAt() when checking nullness of passing arguments at callsite. In this way it can handle cases where the argument does not have nonnull attribute but has a dominating null check from the CFG. It also adds assertions in isKnownNonNull() and isKnownNonNullFromDominatingCondition() to make sure the value checked is pointer type (as defined in LLVM document). These assertions might trip failures in things which are not covered under llvm/test, but fixes should be pretty obvious.
Reviewers: reames
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D12779
llvm-svn: 247587
This was a flawed change - it just caused the getElementType call to be
deferred until later, when we really need to remove it. Now that the IR
for GlobalAliases has been updated, the root cause is addressed that way
instead and this change is no longer needed (and in fact gets in the way
- because we want to pass the pointee type directly down further).
Follow up patches to push this through GlobalValue, bitcode format, etc,
will come along soon.
This reverts commit 236160.
llvm-svn: 247585
GetElementPointers must have the first argument's type compared
for structural equivalence. Previously the code erroneously compared the
pointer's type, but this code was dead because all pointer types (of the
same address space) are the same. The pointee must be compared instead
(using the type stored in the GEP, not from the pointer type which will
be erased anyway).
Author: jrkoenig
Reviewers: dschuff, nlewycky, jfb
Subscribers: nlewycky, llvm-commits
Differential revision: http://reviews.llvm.org/D12820
llvm-svn: 247570
of a method and into a re-usable static helper. We can potentially use
this function from the implementation of a new pass manager oriented
version of the pass. Also add some better documentation of exactly what
the semantic model of this routine is (it isn't trivial) and use a more
modern naming convention for it.
llvm-svn: 247524
static function rather than a method. It just needed access to
TargetLibraryInfo, and this way it can be easily reused between the
current FunctionAttrs implementation and any port for the new pass
manager.
llvm-svn: 247522
comments, deleting duplicate comments, moving comments to consistently
live on the definition since these are all really internal routines,
etc. NFC.
llvm-svn: 247520
Improved InstCombine support for CVTPH2PS (F16C half 2 float conversion):
<4 x float> @llvm.x86.vcvtph2ps.128(<8 x i16>) - only uses the bottom 4 i16 elements for the conversion.
Added constant folding support.
Differential Revision: http://reviews.llvm.org/D12731
llvm-svn: 247504
In some ways this is a very boring port to the new pass manager as there
are no interesting analyses or dependencies or other oddities.
However, this does introduce the first good example of a transformation
pass with non-trivial state porting to the new pass manager. I've tried
to carve out patterns here to replicate elsewhere, and would appreciate
comments on whether folks like these patterns:
- A common need in the new pass manager is to effectively lift the pass
class and some of its state into a public header file. Prior to this,
LLVM used anonymous namespaces to provide "module private" types and
utilities, but that doesn't scale to cases where a public header file
is needed and the new pass manager will exacerbate that. The pattern
I've adopted here is to use the namespace-cased-name of the core pass
(what would be a module if we had them) as a module-private namespace.
Then utility and other code can be declared and defined in this
namespace. At some point in the future, we could even have
(conditionally compiled) code that used modules features when
available to do the same basic thing.
- I've split the actual pass run method in two in order to expose
a private method usable by the old pass manager to wrap the new class
with a minimum of duplicated code. I actually looked at a bunch of
ways to automate or generate these, but they are all quite terrible
IMO. The fundamental need is to extract the set of analyses which need
to cross this interface boundary, and that will end up being too
unpredictable to effectively encapsulate IMO. This is also
a relatively small amount of boiler plate that will live a relatively
short time, so I'm not too worried about the fact that it is boiler
plate.
The rest of the patch is totally boring but results in a massive diff
(sorry). It just moves code around and removes or adds qualifiers to
reflect the new name and nesting structure.
Differential Revision: http://reviews.llvm.org/D12773
llvm-svn: 247501
Summary: This fixes a variety of typos in docs, code and headers.
Subscribers: jholewinski, sanjoy, arsenm, llvm-commits
Differential Revision: http://reviews.llvm.org/D12626
llvm-svn: 247495
Summary: This patch replaces isKnownNonNull() with isKnownNonNullAt() when checking nullness of passing arguments at callsite. In this way it can handle cases where the argument does not have nonnull attribute but has a dominating null check from the CFG.
Reviewers: reames
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D12779
llvm-svn: 247356
Summary: This patch replaces isKnownNonNull() with isKnownNonNullAt() when checking nullness of gc.relocate return value. In this way it can handle cases where the relocated value does not have nonnull attribute but has a dominating null check from the CFG.
Reviewers: reames
Subscribers: llvm-commits, sanjoy
Differential Revision: http://reviews.llvm.org/D12772
llvm-svn: 247353
This patch enables small size reductions in which the source types are smaller
than the reduction type (e.g., computing an i16 sum from the values in an i8
array). The previous behavior was to only allow small size reductions if the
source types and reduction type were the same. The change accounts for the fact
that the existing sign- and zero-extend instructions in these cases should
still be included in the cost model.
Differential Revision: http://reviews.llvm.org/D12770
llvm-svn: 247337
This change correctly sets the attributes on the callsites
generated in thunks. This makes sure things such as sret, sext, etc.
are correctly set, so that the call can be a proper tailcall.
Also, the transfer of attributes in the replaceDirectCallers function
appears to be unnecessary, but until this is confirmed it will remain.
Author: jrkoenig
Reviewers: dschuff, jfb
Subscribers: llvm-commits, nlewycky
Differential revision: http://reviews.llvm.org/D12581
llvm-svn: 247313
This is a follow up to http://reviews.llvm.org/D11995 implementing the suggestion by Hans.
If we know some of the bits of the value being switched on, we know that the maximum number of unique cases covers the unknown bits. This allows to eliminate switch defaults for large integers (i32) when most bits in the value are known.
Note that I had to make the transform contingent on not having any dead cases. This is conservatively correct with the old code, but required for the new code since we might have a dead case which varies one of the known bits. Counting that towards our number of covering cases would be bad. If we do have dead cases, we'll eliminate them first, then revisit the possibly dead default.
Differential Revision: http://reviews.llvm.org/D12497
llvm-svn: 247309
Except the changes that defined virtual destructors as =default, because that
ran into problems with GCC 4.7 and overriding methods that weren't noexcept.
llvm-svn: 247298
removes cast by performing the lshr on smaller types. However, currently there
is no trunc(lshr (sext A), Cst) variant.
This patch add such optimization by transforming trunc(lshr (sext A), Cst)
to ashr A, Cst.
Differential Revision: http://reviews.llvm.org/D12520
llvm-svn: 247271
GlobalsAA must by definition be preserved in function passes, but the passmanager doesn't know that. Make each pass explicitly preserve GlobalsAA.
llvm-svn: 247263
The assertion was weaker than it should be and gave the impression we're growing the number of base defining values being considered during the fixed point interation. That's not true. The tighter form of the assert is useful documentation.
llvm-svn: 247221
This change is simply enhancing the existing inference algorithm to handle insertelement instructions by conservatively inserting a new instruction to propagate the vector of associated base pointers. In the process, I'm ripping out the peephole optimizations which mostly helped cover the fact this hadn't been done.
Note that most of the newly inserted nodes will be nearly immediately removed by the post insertion optimization pass introduced in 246718. Arguably, we should be trying harder to avoid the malloc traffic here, but I'd rather get the code correct, then worry about compile time.
Unlike previous extensions of the algorithm to handle more case, I discovered the existing code was causing miscompiles in some cases. In particular, we had an implicit assumption that the peephole covered *all* insert element instructions, so if we had a value directly based on a insert element the peephole didn't cover, we proceeded as if it were a base anyways. Not good. I believe we had the same issue with shufflevector which is why I adjusted the predicate for them as well.
Differential Revision: http://reviews.llvm.org/D12583
llvm-svn: 247210
Previously, the base pointer algorithm wasn't deterministic. The core fixed point was (of course), but we were inserting new nodes and optimizing them in an order which was unspecified and variable. We'd somewhat hacked around this for testing by sorting by value name, but that doesn't solve the general determinism problem.
Instead, we can use the order of traversal over the def/use graph to give us a single consistent ordering. Today, this is a DFS order, but the exact order doesn't mater provided it's deterministic for a given input.
(Q: It is safe to rely on a deterministic order of operands right?)
Note that this only fixes the determinism within a single inference step. The inference step is currently invoked many times in a non-deterministic order. That's a future change in the sequence. :)
Differential Revision: http://reviews.llvm.org/D12640
llvm-svn: 247208
Visit disjoint sets in a deterministic order based on the maximum BitSetNM
index, otherwise the order in which we visit them will depend on pointer
comparisons. This was being exposed by MSan.
llvm-svn: 247201
with the new pass manager, and no longer relying on analysis groups.
This builds essentially a ground-up new AA infrastructure stack for
LLVM. The core ideas are the same that are used throughout the new pass
manager: type erased polymorphism and direct composition. The design is
as follows:
- FunctionAAResults is a type-erasing alias analysis results aggregation
interface to walk a single query across a range of results from
different alias analyses. Currently this is function-specific as we
always assume that aliasing queries are *within* a function.
- AAResultBase is a CRTP utility providing stub implementations of
various parts of the alias analysis result concept, notably in several
cases in terms of other more general parts of the interface. This can
be used to implement only a narrow part of the interface rather than
the entire interface. This isn't really ideal, this logic should be
hoisted into FunctionAAResults as currently it will cause
a significant amount of redundant work, but it faithfully models the
behavior of the prior infrastructure.
- All the alias analysis passes are ported to be wrapper passes for the
legacy PM and new-style analysis passes for the new PM with a shared
result object. In some cases (most notably CFL), this is an extremely
naive approach that we should revisit when we can specialize for the
new pass manager.
- BasicAA has been restructured to reflect that it is much more
fundamentally a function analysis because it uses dominator trees and
loop info that need to be constructed for each function.
All of the references to getting alias analysis results have been
updated to use the new aggregation interface. All the preservation and
other pass management code has been updated accordingly.
The way the FunctionAAResultsWrapperPass works is to detect the
available alias analyses when run, and add them to the results object.
This means that we should be able to continue to respect when various
passes are added to the pipeline, for example adding CFL or adding TBAA
passes should just cause their results to be available and to get folded
into this. The exception to this rule is BasicAA which really needs to
be a function pass due to using dominator trees and loop info. As
a consequence, the FunctionAAResultsWrapperPass directly depends on
BasicAA and always includes it in the aggregation.
This has significant implications for preserving analyses. Generally,
most passes shouldn't bother preserving FunctionAAResultsWrapperPass
because rebuilding the results just updates the set of known AA passes.
The exception to this rule are LoopPass instances which need to preserve
all the function analyses that the loop pass manager will end up
needing. This means preserving both BasicAAWrapperPass and the
aggregating FunctionAAResultsWrapperPass.
Now, when preserving an alias analysis, you do so by directly preserving
that analysis. This is only necessary for non-immutable-pass-provided
alias analyses though, and there are only three of interest: BasicAA,
GlobalsAA (formerly GlobalsModRef), and SCEVAA. Usually BasicAA is
preserved when needed because it (like DominatorTree and LoopInfo) is
marked as a CFG-only pass. I've expanded GlobalsAA into the preserved
set everywhere we previously were preserving all of AliasAnalysis, and
I've added SCEVAA in the intersection of that with where we preserve
SCEV itself.
One significant challenge to all of this is that the CGSCC passes were
actually using the alias analysis implementations by taking advantage of
a pretty amazing set of loop holes in the old pass manager's analysis
management code which allowed analysis groups to slide through in many
cases. Moving away from analysis groups makes this problem much more
obvious. To fix it, I've leveraged the flexibility the design of the new
PM components provides to just directly construct the relevant alias
analyses for the relevant functions in the IPO passes that need them.
This is a bit hacky, but should go away with the new pass manager, and
is already in many ways cleaner than the prior state.
Another significant challenge is that various facilities of the old
alias analysis infrastructure just don't fit any more. The most
significant of these is the alias analysis 'counter' pass. That pass
relied on the ability to snoop on AA queries at different points in the
analysis group chain. Instead, I'm planning to build printing
functionality directly into the aggregation layer. I've not included
that in this patch merely to keep it smaller.
Note that all of this needs a nearly complete rewrite of the AA
documentation. I'm planning to do that, but I'd like to make sure the
new design settles, and to flesh out a bit more of what it looks like in
the new pass manager first.
Differential Revision: http://reviews.llvm.org/D12080
llvm-svn: 247167
Predicating stores requires creating extra blocks. It's much cleaner if we do this in one pass instead of mutating the CFG while writing vector instructions.
Besides which we can make use of helper functions to update domtree for us, reducing the work we need to do.
llvm-svn: 247139
This change extends the bitset lowering pass to support bitsets that may
contain either functions or global variables. A function bitset is lowered to
a jump table that is laid out before one of the functions in the bitset.
Also add support for non-string bitset identifier names. This allows for
distinct metadata nodes to stand in for names with internal linkage,
as done in D11857.
Differential Revision: http://reviews.llvm.org/D11856
llvm-svn: 247080
removes cast by performing the lshr on smaller types. However, currently there
is no trunc(lshr (sext A), Cst) variant.
This patch add such optimization by transforming trunc(lshr (sext A), Cst)
to ashr A, Cst.
Differential Revision: http://reviews.llvm.org/D12520
llvm-svn: 246997
Trivial multiplication by zero may survive the worklist. We tried to
reassociate the multiplication with a division instruction, causing us
to divide by zero; bail out instead.
This fixes PR24726.
llvm-svn: 246939
As a first step towards a new implementation of the base pointer inference algorithm, introduce an abstraction for BDVs, strengthen the assertions around them, and rewrite the BDV relation code in terms of the abstraction which includes an explicit notion of whether the BDV is also a base. The later is motivated by the fact we had a bug where insertelement was always assumed to be a base pointer even though the BDV code knew it wasn't. The strengthened assertions in this patch would have caught that bug.
The next step will be to separate the DefiningValueMap into a BDV use list cache (entirely within findBasePointers) and a base pointer cache. Having the former will allow me to use a deterministic visit order when visiting BDVs in the inference algorithm and remove a bunch of ordering related hacks. Before actually doing the last step, I'm likely going to extend the lattice with a 'BaseN' (seen only base inputs) state so that I can kill the post process optimization step.
Phabricator Revision: http://reviews.llvm.org/D12608
llvm-svn: 246809
The visit order being used in the base pointer inference algorithm is currently non-deterministic. When working on http://reviews.llvm.org/D12583, I discovered that we were relying on a peephole optimization to get deterministic ordering in one of the test cases.
This change is intented to let me test and land http://reviews.llvm.org/D12583. The current code will not be long lived. I'm starting to investigate a rewrite of the algorithm which will combine the post-process step into the initial algorithm and make the visit order determistic. Before doing that, I wanted to make sure the existing code was complete and the test were stable. Hopefully, patches should be up for review for the new algorithm this week or early next.
llvm-svn: 246801
Mehdi Amini