Predicating stores requires creating extra blocks. It's much cleaner if we do this in one pass instead of mutating the CFG while writing vector instructions.
Besides which we can make use of helper functions to update domtree for us, reducing the work we need to do.
llvm-svn: 247139
Summary:
One of the vector splitting paths for extract_vector_elt tries to lower:
define i1 @via_stack_bug(i8 signext %idx) {
%1 = extractelement <2 x i1> <i1 false, i1 true>, i8 %idx
ret i1 %1
}
to:
define i1 @via_stack_bug(i8 signext %idx) {
%base = alloca <2 x i1>
store <2 x i1> <i1 false, i1 true>, <2 x i1>* %base
%2 = getelementptr <2 x i1>, <2 x i1>* %base, i32 %idx
%3 = load i1, i1* %2
ret i1 %3
}
However, the elements of <2 x i1> are not byte-addressible. The result of this
is that the getelementptr expands to '%base + %idx * (1 / 8)' which simplifies
to '%base + %idx * 0', and then simply '%base' causing all values of %idx to
extract element zero.
This commit fixes this by promoting the vector elements of <8-bits to i8 before
splitting the vector.
This fixes a number of test failures in pocl.
Reviewers: pekka.jaaskelainen
Subscribers: pekka.jaaskelainen, llvm-commits
Differential Revision: http://reviews.llvm.org/D12591
llvm-svn: 247128
Currently this hits an assert that extload should
always be supported, which assumes integer extloads.
This moves a hack out of SI's argument lowering and
is covered by existing tests.
llvm-svn: 247113
Example output:
Linker Options {
Size: 32
Count: 2
Strings [
Value: -framework
Value: Cocoa
]
}
There were only two tests using this -- so I converted them as part of
this commit rather than separately.
Differential Revision: http://reviews.llvm.org/D12702
llvm-svn: 247106
Typically these are catchpads, which hold data used to decide whether to
catch the exception or continue unwinding. We also shouldn't create MBBs
for catchendpads, cleanupendpads, or terminatepads, since no real code
can live in them.
This fixes a problem where MI passes (like the register allocator) would
try to put code into catchpad blocks, which are not executed by the
runtime. In the new world, blocks ending in invokes now have many
possible successors.
llvm-svn: 247102
Summary:
32-bit funclets have short prologues that allocate enough stack for the
largest call in the whole function. The runtime saves CSRs for the
funclet. It doesn't restore CSRs after we finally transfer control back
to the parent funciton via a CATCHRET, but that's a separate issue.
32-bit funclets also have to adjust the incoming EBP value, which is
what llvm.x86.seh.recoverframe does in the old model.
64-bit funclets need to spill CSRs as normal. For simplicity, this just
spills the same set of CSRs as the parent function, rather than trying
to compute different CSR sets for the parent function and each funclet.
64-bit funclets also allocate enough stack space for the largest
outgoing call frame, like 32-bit.
Reviewers: majnemer
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D12546
llvm-svn: 247092
This change extends the bitset lowering pass to support bitsets that may
contain either functions or global variables. A function bitset is lowered to
a jump table that is laid out before one of the functions in the bitset.
Also add support for non-string bitset identifier names. This allows for
distinct metadata nodes to stand in for names with internal linkage,
as done in D11857.
Differential Revision: http://reviews.llvm.org/D11856
llvm-svn: 247080
Adds vcc to output string input for e32. Allows option
of using e64 encoding with assembler.
Also fixes these instructions not implicitly reading exec.
llvm-svn: 247074
Summary: This patch modifies X86TargetLowering::LowerVASTART so that
struct va_list is initialized with 32 bit pointers in x32. It also
includes tests that call @llvm.va_start() for x32.
Patch by João Porto
Subscribers: llvm-commits, hjl.tools
Differential Revision: http://reviews.llvm.org/D12346
llvm-svn: 247069
The old implementation assumed LP64 which is broken for x32. Specifically, the
MOVE8rm_NOREX and MOVE8mr_NOREX, when selected, would cause a 'Cannot emit
physreg copy instruction' error message to be reported.
This patch also enable the h-register*ll tests for x32.
Differential Revision: http://reviews.llvm.org/D12336
Patch by João Porto
llvm-svn: 247058
sub C, x - > add (sub 0, x), C for DS offsets.
This is mostly to fix regressions that show up when
SeparateConstOffsetFromGEP is enabled.
llvm-svn: 247054
This corner case happens when we have an irreducible SCC that is
deeply nested. As we work down the tree, the backedge masses start
getting smaller and smaller until we reach one that is down to 0.
Since we distribute the incoming mass using the backedge masses as
weight, the distributor does not allow zero weights. So, we simply
ignore them (which will just use the weights of the non-zero nodes).
llvm-svn: 247050
.align directive refuses alignment 0 -- a comment in the code hints this is
done for GNU as compatibility, but it seems GNU as accepts .align 0
(and silently rounds up alignment to 1).
Differential Revision: http://reviews.llvm.org/D12682
llvm-svn: 247048
- Move tests only exercising instsimplify to instsimplify's apint-or.ll
- Actually test the CHECK lines in instsimplify's apint-or.ll
- Merge the remaining tests in apint-or1.ll and apint-or2.ll, use FileCheck
llvm-svn: 247045
removes cast by performing the lshr on smaller types. However, currently there
is no trunc(lshr (sext A), Cst) variant.
This patch add such optimization by transforming trunc(lshr (sext A), Cst)
to ashr A, Cst.
Differential Revision: http://reviews.llvm.org/D12520
llvm-svn: 246997
Summary: And define them to have noop casts with address spaces 0-255.
Reviewers: pekka.jaaskelainen
Subscribers: pekka.jaaskelainen, llvm-commits
Differential Revision: http://reviews.llvm.org/D12678
llvm-svn: 246990
Trivial multiplication by zero may survive the worklist. We tried to
reassociate the multiplication with a division instruction, causing us
to divide by zero; bail out instead.
This fixes PR24726.
llvm-svn: 246939
In searching for a fix for the underlying code-quality bug highlighted by
r246937 (that SDAG simplification can lead to us generating an ISD::OR node
with a constant zero LHS), I ran across this:
We generically canonicalize commutative binary-operation nodes in SDAG getNode
so that, if only one operand is a constant, it will be on the RHS. However, we
were doing this only after a bunch of constant-based simplification checks that
all assume this canonical form (that any constant will be on the RHS). Moving
the operand-swapping canonicalization prior to these checks seems like the
right thing to do (and, as it turns out, causes SDAG to completely fold away the
computation in test/CodeGen/ARM/2012-11-14-subs_carry.ll, just like InstCombine
would do).
llvm-svn: 246938
To commute a trivial rlwimi instructions (meaning one with a full mask and zero
shift), we'd need to ability to form an all-zero mask (instead of an all-one
mask) using rlwimi. We can't represent this, however, and we'll miscompile code
if we try.
The code quality problem that this highlights (that SDAG simplification can
lead to us generating an ISD::OR node with a constant zero LHS) will be fixed
as a follow-up.
Fixes PR24719.
llvm-svn: 246937
This commit accomplish two goals:
1) it's a step forward to deprecate macho-dump, now less than 40 tests
rely on it.
2) It tests all the MachO specific features introduced in llvm-readobj in
the following commits: r246789, r246665, r246474.
While the conversion is mostly mechanical (I double-checked all the
tests output one by one, but still), a post-commit review is greatly
appreciated.
llvm-svn: 246904
PPCISelDAGToDAG has a transformation that generates a rlwimi instruction from
an input pattern that looks like this:
and(or(x, c1), c2)
but the associated logic does not work if there are bits that are 1 in c1 but 0
in c2 (these are normally canonicalized away, but that can't happen if the 'or'
has other users. Make sure we abort the transformation if such bits are
discovered.
Fixes PR24704.
llvm-svn: 246900
This adds a basic cost model for interleaved-access vectorization (and a better
default for shuffles), and enables interleaved-access vectorization by default.
The relevant difference from the default cost model for interleaved-access
vectorization, is that on PPC, the shuffles that end up being used are *much*
cheaper than modeling the process with insert/extract pairs (which are
quite expensive, especially on older cores).
llvm-svn: 246824
On the A2, with an eye toward QPX unaligned-load merging, we should always use
aggressive interleaving. It is generally superior to only using concatenation
unrolling.
llvm-svn: 246819
When forming permutation-based unaligned vector loads, we need to know whether
it is valid to read ahead of the requested address by a full vector length.
Doing so is more efficient (and allows for more CSE with later loads), but
could trigger a page fault if invalid. To determine validity, we look for other
loads in the same block that access the relevant address range.
The relevant point here is that we need to do this as part of the process of
forming permutation-based vector loads, and this happens quite early in the
SDAG pipeline - specifically before many of the address calculations are fully
canonicalized. As a result, we need to try harder to recognize base+offset
address computations, because they still might appear as chain of adds
(base+offset+offset, for example). To account for this, we'll look through
chains of adds, accumulating the constant offsets.
llvm-svn: 246813
Pre-P8, when we generate code for unaligned vector loads (for Altivec and QPX
types), even when accounting for the combining that takes place for multiple
consecutive such loads, there is at least one load instructions and one
permutation for each load. Make sure the cost reported reflects the cost of the
permutes as well.
llvm-svn: 246807
If you compute the MMO offset using unsigned arithmetic, you end up with a
large positive offset instead of a small negative one. In theory, this could
cause bad instruction-scheduling decisions later.
I noticed this by inspection from the debug output, and using that for the
regression test is the best I can do right now.
llvm-svn: 246805
Summary:
This fixes bugzilla bug 24656. Fixes the case where there is a forward
reference to a global variable using an ID (i.e. @0). It does this by
passing the address space of the initializer pointer for which the
forward referenced global is used.
llvm-svn: 246788
Summary:
Fixes bug 24645. Problem appears to be that the type may be undefined
when ConvertValIDToValue is called.
Reviewers: kcc
Subscribers: llvm-commits
llvm-svn: 246779
Summary:
Fixes bug 24646. Previous code was not checking if an index into a vector
was valid, resulting in a SEGV. Fixed by assuming the construct can't
be parsed when given this input.
Reformat and add test.
Differential Revision: http://reviews.llvm.org/D12539
llvm-svn: 246774
Use and check the 'IsFast' optional parameter to TLI.allowsMemoryAccess() any time
we have a merged access candidate. Without this patch, we were generating unaligned
16-byte (SSE) memops for x86 targets where those accesses are slow.
This change was mentioned in:
http://reviews.llvm.org/D10662 and
http://reviews.llvm.org/D10905
and will help solve PR21711.
Differential Revision: http://reviews.llvm.org/D12573
llvm-svn: 246771
This patch allows the mixing of scaled and unscaled load/stores to form
load/store pairs.
PR24465
http://reviews.llvm.org/D12116
Many thanks to Ahmed and Michael for fixes and code review.
llvm-svn: 246769
Summary:
This function was not taking into account that the
input type could be a vector, and wasn't properly
working for vector types.
This caused an assert when building spec2k6 perlbmk for armv8.
Reviewers: rengolin, mzolotukhin
Subscribers: silviu.baranga, mzolotukhin, rengolin, eugenis, jmolloy, aemerson, llvm-commits
Differential Revision: http://reviews.llvm.org/D12559
llvm-svn: 246759
Summary:
This intrinsic can be used to extract a pointer to the exception caught by
a given catchpad. Its argument has token type and must be a `catchpad`.
Also clarify ExtendingLLVM documentation regarding overloaded intrinsics.
Reviewers: majnemer, andrew.w.kaylor, sanjoy, rnk
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D12533
llvm-svn: 246752
Summary:
Add a `cleanupendpad` instruction, used to mark exceptional exits out of
cleanups (for languages/targets that can abort a cleanup with another
exception). The `cleanupendpad` instruction is similar to the `catchendpad`
instruction in that it is an EH pad which is the target of unwind edges in
the handler and which itself has an unwind edge to the next EH action.
The `cleanupendpad` instruction, similar to `cleanupret` has a `cleanuppad`
argument indicating which cleanup it exits. The unwind successors of a
`cleanuppad`'s `cleanupendpad`s must agree with each other and with its
`cleanupret`s.
Update WinEHPrepare (and docs/tests) to accomodate `cleanupendpad`.
Reviewers: rnk, andrew.w.kaylor, majnemer
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D12433
llvm-svn: 246751
If ld.gold is configured without --enable-thread, ld.gold might not load libpthread.so.
Preloading LLVMgold.so loads also libpthread.so.
llvm-svn: 246739
We used to accept (and even test, and generate) 16-byte alignment
for 32-byte nontemporal stores, but they require 32-byte alignment,
per SDM. Found by inspection.
Instead of hardcoding 16 in the patfrag, check for natural alignment.
Also fix the autoupgrade and the various tests.
Also, use explicit -mattr instead of -mcpu: I stared at the output
several minutes wondering why I get 2x movntps for the unaligned
case (which is the ideal output, but needs some work: see FIXME),
until I remembered corei7-avx implies +slow-unaligned-mem-32.
llvm-svn: 246733
I'm adding a regression test to better cover code generation for unaligned
vector loads and stores, but there's no functional change to the code
generation here. There is an improvement to the cost model for unaligned vector
loads and stores, mostly for QPX (for which we were not previously accounting
for the permutation-based loads), and the cost model implementation is cleaner.
llvm-svn: 246712
There was infinite loop because it was trying to change assume(true) into
assume(true)
Also added handling when assume(false) appear
http://reviews.llvm.org/D12516
llvm-svn: 246697
After hitting @llvm.assume(X) we can:
- propagate equality that X == true
- if X is icmp/fcmp (with eq operation), and one of operand
is constant we can change all variables with constants in the same BasicBlock
http://reviews.llvm.org/D11918
llvm-svn: 246695
This patch uses the metadata defined in D12341 to avoid creating an unpredictable branch.
Differential Revision: http://reviews.llvm.org/D12342
llvm-svn: 246692
This patch uses the metadata defined in D12341 to avoid creating an unpredictable branch.
Differential Revision: http://reviews.llvm.org/D12343
llvm-svn: 246691
Every time lit is invoked, I get warnings like so:
lit.py: lit.cfg:286: note: Did not find llvm-go in /Users/bogner/build/llvm/./bin
lit.py: lit.cfg:286: note: Did not find Kaleidoscope-Ch3 in /Users/bogner/build/llvm/./bin
Since these tools are only built in certain configs, these warnings
are superfluous. Change it so that we only warn about tools that are
built in all configs.
llvm-svn: 246684
LowerVECTOR_SHUFFLE needs to decide whether to pass a vector shuffle off to the
TableGen-generated matching code, and it does this by testing the same
predicates used by the TableGen files. Unfortunately, when we added new
P8Altivec-only predicates, we started universally testing them in
LowerVECTOR_SHUFFLE, and if then matched when targeting a system prior to a P8,
we'd end up with a selection failure.
llvm-svn: 246675
With a fix for big endian machines. Thanks to Daniel Sanders for the debugging!
Original commit message:
The binaries containing the linked DWARF generated by dsymutil are not
standard relocatable object files like emitted did previsously. They should be
dSYM companion files, which means they have a different file type in the
header, but also a couple other peculiarities:
- they contain the segments and sections from the original binary in their
load commands, but not the actual contents. This means they get an address
and a size, but their offset is always 0 (but these are not virtual sections)
- they also conatin all the defined symbols from the original binary
This makes MC a really bad fit to emit these kind of binaries. The approach
that was used in this patch is to leverage MC's section layout for the
debug sections, but to use a replacement for MachObjectWriter that lives
in MachOUtils.cpp. Some of the low-level helpers from MachObjectWriter
were reused too.
llvm-svn: 246673
This is a continuation of the fix from:
http://reviews.llvm.org/D10662
and discussion in:
http://reviews.llvm.org/D12154
Here, we distinguish slow unaligned SSE (128-bit) accesses from slow unaligned
scalar (64-bit and under) accesses. Other lowering (eg, getOptimalMemOpType)
assumes that unaligned scalar accesses are always ok, so this changes
allowsMisalignedMemoryAccesses() to match that behavior.
Differential Revision: http://reviews.llvm.org/D12543
llvm-svn: 246658
Summary:
Add the necessary plumbing so that llvm_token_ty can be used as an
argument/return type in intrinsic definitions and correspondingly require
TokenTy in function types. TokenTy is an opaque type that has no target
lowering, but can be used in machine-independent intrinsics. It is
required for the upcoming llvm.eh.padparam intrinsic.
Reviewers: majnemer, rnk
Subscribers: stoklund, llvm-commits
Differential Revision: http://reviews.llvm.org/D12532
llvm-svn: 246651
We were bailing to two places if our runtime checks failed. If the initial overflow check failed, we'd go to ScalarPH. If any other check failed, we'd go to MiddleBlock. This caused us to have to have an extra PHI per induction and reduction as the vector loop's exit block was not dominated by its latch.
There's no need to have this behavior - if we just always go to ScalarPH we can get rid of a bunch of complexity.
llvm-svn: 246637
This reduces the complexity of createEmptyBlock() and will open the door to further refactoring.
The test change is simply because we're now constant folding a trivial test.
llvm-svn: 246634
There's no need to widen canonical induction variables. It's just as efficient to create a *new*, wide, induction variable.
Consider, if we widen an indvar, then we'll have to truncate it before its uses anyway (1 trunc). If we create a new indvar instead, we'll have to truncate that instead (1 trunc) [besides which IndVars should go and clean up our mess after us anyway on principle].
This lets us remove a ton of special-casing code.
llvm-svn: 246631
Vectorized loops only ever have one induction variable. All induction PHIs from the scalar loop are rewritten to be in terms of this single indvar.
We were trying very hard to pick an indvar that already existed, even if that indvar wasn't canonical (didn't start at zero). But trying so hard is really fruitless - creating a new, canonical, indvar only results in one extra add in the worst case and that add is trivially easy to push through the PHI out of the loop by instcombine.
If we try and be less clever here and instead let instcombine clean up our mess (as we do in many other places in LV), we can remove unneeded complexity.
llvm-svn: 246630
Vector 'getelementptr' with scalar base is an opportunity for gather/scatter intrinsic to generate a better sequence.
While looking for uniform base, we want to use the scalar base pointer of GEP, if exists.
Differential Revision: http://reviews.llvm.org/D11121
llvm-svn: 246622
The MS incremental linker seems to inspect the timestamp written into
the object file to determine whether or not it's contents need to be
considered. Failing to set the timestamp to a date newer than the
executable will result in the object file not participating in
subsequent links. To ameliorate this, write the current time into the
object file's TimeDateStamp field.
llvm-svn: 246607
The code introduced in r244314 assumed that EXTRACT_VECTOR_ELT only
takes constant indices, but it does accept variables.
Bail out for those: we can't use them, as the shuffles we want to
reconstruct do require constant masks.
llvm-svn: 246594
COFF sections are accompanied with an auxiliary symbol which includes a
checksum. This checksum used to be filled with just zero but this seems
to upset LINK.exe when it is processing a /INCREMENTAL link job.
Instead, fill the CheckSum field with the JamCRC of the section
contents. This matches MSVC's behavior.
This fixes PR19666.
N.B. A rather simple implementation of JamCRC is given. It implements
a byte-wise calculation using the method given by Sarwate. There are
implementations with higher throughput like slice-by-eight and making
use of PCLMULQDQ. We can switch to one of those techniques if it turns
out to be a significant use of time.
llvm-svn: 246590
Parallelism can be enabled using a new plugin option, jobs=N, where N is
the number of code generation threads.
Differential Revision: http://reviews.llvm.org/D12308
llvm-svn: 246584
-only-needed -- link in only symbols needed by destination module
-internalize -- internalize linked symbols
Differential Revision: http://reviews.llvm.org/D12459
llvm-svn: 246561
This matches the ARM behavior. In both cases, the register is part
of the optional Performance Monitors extension, so, add the feature,
and enable it for the A-class processors we support.
Differential Revision: http://reviews.llvm.org/D12425
llvm-svn: 246555
Summary:
This change turns on by default interleaved access vectorization
for AArch64.
We also clean up some tests which were spedifically enabling this
behaviour.
Reviewers: rengolin
Subscribers: aemerson, llvm-commits, rengolin
Differential Revision: http://reviews.llvm.org/D12149
llvm-svn: 246542
Summary:
This change turns on by default interleaved access vectorization on ARM,
as it has shown to be beneficial on ARM.
Reviewers: rengolin
Subscribers: aemerson, llvm-commits, rengolin
Differential Revision: http://reviews.llvm.org/D12146
llvm-svn: 246541
Summary:
Interleaved access lowering removes a memory operation and a
sequence of vector shuffles and replaces it with a series of
memory operations. This should be always beneficial.
This pass in only enabled on ARM/AArch64.
Reviewers: rengolin
Subscribers: aemerson, llvm-commits, rengolin
Differential Revision: http://reviews.llvm.org/D12145
llvm-svn: 246540
Currently, when edge weights are assigned to edges that are created when lowering switch statement, the weight on the edge to default statement (let's call it "default weight" here) is not considered. We need to distribute this weight properly. However, without value profiling, we have no idea how to distribute it. In this patch, I applied the heuristic that this weight is evenly distributed to successors.
For example, given a switch statement with cases 1,2,3,5,10,11,20, and every edge from switch to each successor has weight 10. If there is a binary search tree built to test if n < 10, then its two out-edges will have weight 4x10+10/2 = 45 and 3x10 + 10/2 = 35 respectively (currently they are 40 and 30 without considering the default weight). Each distribution (which is 5 here) will be stored in each SwitchWorkListItem for further distribution.
There are some exceptions:
For a jump table header which doesn't have any edge to default statement, we don't distribute the default weight to it.
For a bit test header which covers a contiguous range and hence has no edges to default statement, we don't distribute the default weight to it.
When the branch checks a single value or a contiguous range with no edge to default statement, we don't distribute the default weight to it.
In other cases, the default weight is evenly distributed to successors.
Differential Revision: http://reviews.llvm.org/D12418
llvm-svn: 246522
SETCC is one of those special node types for which operation actions (legality,
etc.) is keyed off of an operand type, not the node's value type. This makes
sense because the value type of a legal SETCC node is determined by its
operands' value type (via the TLI function getSetCCResultType). When the
SDAGBuilder creates SETCC nodes, it either creates them with an MVT::i1 value
type, or directly with the value type provided by TLI.getSetCCResultType.
The first problem being fixed here is that DAGCombine had several places
querying TLI.isOperationLegal on SETCC, but providing the return of
getSetCCResultType, instead of the operand type directly. This does not mean
what the author thought, and "luckily", most in-tree targets have SETCC with
Custom lowering, instead of marking them Legal, so these checks return false
anyway.
The second problem being fixed here is that two of the DAGCombines could create
SETCC nodes with arbitrary (integer) value types; specifically, those that
would simplify:
(setcc a, b, op1) and|or (setcc a, b, op2) -> setcc a, b, op3
(which is possible for some combinations of (op1, op2))
If the operands of the and|or node are actual setcc nodes, then this is not an
issue (because the and|or must share the same type), but, the relevant code in
DAGCombiner::visitANDLike and DAGCombiner::visitORLike actually calls
DAGCombiner::isSetCCEquivalent on each operand, and that function will
recognise setcc-like select_cc nodes with other return types. And, thus, when
creating new SETCC nodes, we need to be careful to respect the value-type
constraint. This is even true before type legalization, because it is quite
possible for the SELECT_CC node to have a legal type that does not happen to
match the corresponding TLI.getSetCCResultType type.
To be explicit, there is nothing that later fixes the value types of SETCC
nodes (if the type is legal, but does not happen to match
TLI.getSetCCResultType). Creating SETCCs with an MVT::i1 value type seems to
work only because, either MVT::i1 is not legal, or it is what
TLI.getSetCCResultType returns if it is legal. Fixing that is a larger change,
however. For the time being, restrict the relevant transformations to produce
only SETCC nodes with a value type matching TLI.getSetCCResultType (or MVT::i1
prior to type legalization).
Fixes PR24636.
llvm-svn: 246507
Hopefully this will end the GEPs saga!
This commit reverts r245394, i.e., it reapplies r221876 while incorporating the
fixes from D11847.
r221876 was not reapplied alone because it was not safe and D11847 was not
applied alone because it needs r221876 to produce correct results.
This should fix PR24596.
Original commit message for r221876:
Let's try this again...
This reverts r219432, plus a bug fix.
Description of the bug in r219432 (by Nick):
The bug was using AllPositive to break out of the loop; if the loop break
condition i != e is changed to i != e && AllPositive then the
test_modulo_analysis_with_global test I've added will fail as the Modulo will
be calculated incorrectly (as the last loop iteration is skipped, so Modulo
isn't updated with its Scale).
Nick also adds this comment:
ComputeSignBit is safe to use in loops as it takes into account phi nodes, and
the == EK_ZeroEx check is safe in loops as, no matter how the variable changes
between iterations, zero-extensions will always guarantee a zero sign bit. The
isValueEqualInPotentialCycles check is therefore definitely not needed as all
the variable analysis holds no matter how the variables change between loop
iterations.
And this patch also adds another enhancement to GetLinearExpression - basically
to convert ConstantInts to Offsets (see test_const_eval and
test_const_eval_scaled for the situations this improves).
Original commit message:
This reverts r218944, which reverted r218714, plus a bug fix.
Description of the bug in r218714 (by Nick):
The original patch forgot to check if the Scale in VariableGEPIndex flipped the
sign of the variable. The BasicAA pass iterates over the instructions in the
order they appear in the function, and so BasicAliasAnalysis::aliasGEP is
called with the variable it first comes across as parameter GEP1. Adding a
%reorder label puts the definition of %a after %b so aliasGEP is called with %b
as the first parameter and %a as the second. aliasGEP later calculates that %a
== %b + 1 - %idxprom where %idxprom >= 0 (if %a was passed as the first
parameter it would calculate %b == %a - 1 + %idxprom where %idxprom >= 0) -
ignoring that %idxprom is scaled by -1 here lead the patch to incorrectly
conclude that %a > %b.
Revised patch by Nick White, thanks! Thanks to Lang to isolating the bug.
Slightly modified by me to add an early exit from the loop and avoid
unnecessary, but expensive, function calls.
Original commit message:
Two related things:
1. Fixes a bug when calculating the offset in GetLinearExpression. The code
previously used zext to extend the offset, so negative offsets were converted
to large positive ones.
2. Enhance aliasGEP to deduce that, if the difference between two GEP
allocations is positive and all the variables that govern the offset are also
positive (i.e. the offset is strictly after the higher base pointer), then
locations that fit in the gap between the two base pointers are NoAlias.
Patch by Nick White!
Message from D11847:
Un-revert of r241981 and fix for PR23626. The 'Or' case of GetLinearExpression
delegates to 'Add' if possible, and if not it returns an Opaque value.
Unfortunately the Scale and Offsets weren't being set (and so defaulted to 0) -
and a scale of zero effectively removes the variable from the GEP instruction.
This meant that BasicAA would return MustAliases when it should have been
returning PartialAliases (and PR23626 was an example of the GVN pass using an
incorrect MustAlias to merge loads from what should have been different
pointers).
Differential Revision: http://reviews.llvm.org/D11847
Patch by Nick White <n.j.white@gmail.com>!
llvm-svn: 246502
Summary: This handles all load/store operations that WebAssembly defines, and handles those necessary for C++ such as i1. I left a FIXME for outstanding features which aren't required for now.
Reviewers: sunfish
Subscribers: jfb, llvm-commits, dschuff
llvm-svn: 246500
Also delete and simplify a lot of MachineModuleInfo code that used to be
needed to handle personalities on landingpads. Now that the personality
is on the LLVM Function, we no longer need to track it this way on MMI.
Certainly it should not live on LandingPadInfo.
llvm-svn: 246478
Teach FunctionAttr to infer the nonnull attribute on return values of functions which never return a potentially null value. This is done both via a conservative local analysis for the function itself and a optimistic per-SCC analysis. If no function in the SCC returns anything which could be null (other than values from other functions in the SCC), we can conclude no function returned a null pointer. Even if some function within the SCC returns a null pointer, we may be able to locally conclude that some don't.
Differential Revision: http://reviews.llvm.org/D9688
llvm-svn: 246476
If asked to prove a predicate about a value produced by a PHI node, LazyValueInfo was unable to do so even if the predicate was known to be true for each input to the PHI. This prevented JumpThreading from eliminating a provably redundant branch.
The problematic test case looks something like this:
ListNode *p = ...;
while (p != null) {
if (!p) return;
x = g->x; // unrelated
p = p->next
}
The null check at the top of the loop is redundant since the value of 'p' is null checked on entry to the loop and before executing the backedge. This resulted in us a) executing an extra null check per iteration and b) not being able to LICM unrelated loads after the check since we couldn't prove they would execute or that their dereferenceability wasn't effected by the null check on the first iteration.
Differential Revision: http://reviews.llvm.org/D12383
llvm-svn: 246465
The ISelLowering code turned insertion turned the element for the
lowest lane of a BUILD_VECTOR into an INSERT_SUBREG, this prohibited
the patterns for SCALAR_TO_VECTOR(Load) to match later. Restrict this
to cases without a load argument.
Reported in rdar://22223823
Differential Revision: http://reviews.llvm.org/D12467
llvm-svn: 246462
Summary:
Constant vectors weren't allowed to have an i1 condition in the
BitcodeReader. Make sure we have the same restrictions that are
documented, not more.
Reviewers: nlewycky, rafael, kschimpf
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D12440
llvm-svn: 246459
Avoid marking some MCSymbols as used in MC/AsmParser.cpp when no uses
exist. This fixes a bug in parseAssignmentExpression() which
inadvertently sets IsUsed, thereby triggering:
"invalid re-assignment of non-absolute variable"
on otherwise valid code. No other functionality change intended.
The original version of this patch touched many calls to MCSymbol
accessors. On rafael's advice, I have stripped this patch down a bit.
As a follow-up, I intend to find the call sites which intentionally set
IsUsed and force them to do so explicitly.
Differential Revision: http://reviews.llvm.org/D12347
llvm-svn: 246457
AggressiveAntiDepBreaker was doing some EarlyClobber checking, but was not
checking that the register being potentially renamed was defined by an
early-clobber def where there was also a use, in that instruction, of the
register being considered as the target of the rename. Fixes PR24014.
llvm-svn: 246423
Summary:
If run with other locales (like French),
the decode operation might fail
Reviewers: rafael
Differential Revision: http://reviews.llvm.org/D12432
llvm-svn: 246421
Summary:
JumpThreading shouldn't duplicate a convergent call, because that would move a convergent call into a control-inequivalent location. For example,
if (cond) {
...
} else {
...
}
convergent_call();
if (cond) {
...
} else {
...
}
should not be optimized to
if (cond) {
...
convergent_call();
...
} else {
...
convergent_call();
...
}
Test Plan: test/Transforms/JumpThreading/basic.ll
Patch by Xuetian Weng.
Reviewers: resistor, arsenm, jingyue
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D12484
llvm-svn: 246415
This testcase required 2 copies of the same file, and the second
copy was missing. It was currently working because of a bug I'm
about to fix.
llvm-svn: 246411
The fix is trivial (The actual patch is 2 lines, but as it changes
indentation it looks like more).
clang does not produce this kind of (slightly bogus) debug info
anymore, thus I had to rely on a hand-crafted assembly test to trigger
that case.
llvm-svn: 246410
The value of an inlined subprogram low_pc attribute should not
get relocated, but it can happen that it matches the enclosing
function's start address and thus gets the generic treatment.
Special case it to avoid applying the PC offset twice.
llvm-svn: 246406
There were really two problems here. The first was that we had the truth tables
for signed i1 comparisons backward. I imagine these are not very common, but if
you have:
setcc i1 x, y, LT
this has the '0 1' and the '1 0' results flipped compared to:
setcc i1 x, y, ULT
because, in the signed case, '1 0' is really '-1 0', and the answer is not the
same as in the unsigned case.
The second problem was that we did not have patterns (at all) for the unsigned
comparisons select_cc nodes for i1 comparison operands. This was the specific
cause of PR24552. These had to be added (and a missing Altivec promotion added
as well) to make sure these function for all types. I've added a bunch more
test cases for these patterns, and there are a few FIXMEs in the test case
regarding code-quality.
Fixes PR24552.
llvm-svn: 246400
Add support for MIR serialization of PowerPC-specific operand target flags
(based on the generic infrastructure added in r244185 and r245383).
I won't even pretend that this is good test coverage, but this includes the
regression test associated with r246372. Adding an MIR test for that fix is far
superior to adding an IR-level test because particular instruction-scheduling
decisions are necessary in order to expose the bug, and using an MIR test we
can start the pipeline post-scheduling.
llvm-svn: 246373
This is especially visible in softfp mode, for example in the implementation of libm fabs/fneg functions. If we have:
%1 = vmovdrr r0, r1
%2 = fabs %1
then move the fabs before the vmovdrr:
%1 = and r1, #0x7FFFFFFF
%2 = vmovdrr r0, r1
This is never a lose, and could be a serious win because the vmovdrr may be followed by a vmovrrd, which would enable us to remove the conversion into FPRs completely.
We already do this for f32, but not for f64. Tests are added for both.
llvm-svn: 246360
The VOP3 encoding of these allows any SGPR pair for the i1
output, but this was forced before to always use vcc.
This doesn't yet try to use this, but does add the operand
to the definitions so the main change is adding vcc to the
output of the VOP2 encoding.
llvm-svn: 246358
Without a memory operand, mayLoad or mayStore instructions
are treated as hasUnorderedMemRef, which results in much worse
scheduling.
We really should have a verifier check that any
non-side effecting mayLoad or mayStore has a memory operand.
There are a few instructions (interp and images) which I'm
not sure what / where to add these.
llvm-svn: 246356
I'm working on adding !dbg attachments to functions (PR23367), which
we'll use to determine the canonical subprogram for a function (instead
of the `subprograms:` array in the compile units). This updates a few
old tests in preparation.
Transforms/Mem2Reg/ConvertDebugInfo2.ll had an old-style grep+count
based test that would start to fail because I've added an extra line
with `!dbg`. Instead, explicitly `CHECK` for what I think the test
actually cares about.
All three testcases have subprograms with a valid `function:` reference
-- which means my upgrade script will add a `!dbg` attachment -- but
that aren't referenced from any compile unit. I suspect these testcases
were handreduced over-zealously (or have bitrotted?). Add a reference
from the compile unit so that upcoming Verifier checks won't fail here.
llvm-svn: 246351
Add `Function::setSubprogram()` and `Function::getSubprogram()`,
convenience methods to forward to `setMetadata()` and `getMetadata()`,
respectively, and deal in `DISubprogram` instead of `MDNode`.
Also add a verifier check to enforce that `!dbg` attachments are always
subprograms.
Originally (when I had the llvm-dev discussion back in April) I thought
I'd store a pointer directly on `llvm::Function` for these attachments
-- we frequently have debug info, and that's much cheaper than using map
in the context if there are no other function-level attachments -- but
for now I'm just using the generic infrastructure. Let's add the extra
complexity only if this shows up in a profile.
llvm-svn: 246339
Currently the DWARF backend requires that subprograms have a type, and
the type is ignored if it has an empty type array. The long term
direction here -- see PR23079 -- is instead to skip the type entirely if
there's no valid type.
It turns out we have cases in tree of missing types on subprograms, but
since they're not referenced by compile units, the backend never crashes
on them. One option would be to add a Verifier check that subprograms
have types, and fix the bitrot. However, this is a fair bit of churn
(20-30 testcases) that would be reversed anyway by PR23079.
I found this inconsistency because of a WIP patch and upgrade script for
PR23367 that started crashing on test/DebugInfo/2010-10-01-crash.ll.
This commit updates the testcase to reference the subprogram from the
compile unit, and fixes the resulting crash (in line with the direction
of PR23079). This also updates `DIBuilder` to stop assuming a non-null
pointer for the subroutine types.
llvm-svn: 246333
This reverts isSafeToSpeculativelyExecute's use of ReadNone until we
split ReadNone into two pieces: one attribute which reasons about how
the function reasons about memory and another attribute which determines
how it may be speculated, CSE'd, trap, etc.
llvm-svn: 246331
As a follow-up to r246098, require `DISubprogram` definitions
(`isDefinition: true`) to be 'distinct'. Specifically, add an assembler
check, a verifier check, and bitcode upgrading logic to combat testcase
bitrot after the `DIBuilder` change.
While working on the testcases, I realized that
test/Linker/subprogram-linkonce-weak-odr.ll isn't relevant anymore. Its
purpose was to check for a corner case in PR22792 where two subprogram
definitions match exactly and share the same metadata node. The new
verifier check, requiring that subprogram definitions are 'distinct',
precludes that possibility.
I updated almost all the IR with the following script:
git grep -l -E -e '= !DISubprogram\(.* isDefinition: true' |
grep -v test/Bitcode |
xargs sed -i '' -e 's/= \(!DISubprogram(.*, isDefinition: true\)/= distinct \1/'
Likely some variant of would work for out-of-tree testcases.
llvm-svn: 246327
PR24605 is caused due to an incorrect insert point in instcombine's IR
builder. When simplifying
%t = add X Y
...
%m = icmp ... %t
the replacement for %t should be placed before %t, not before %m, as
there could be a use of %t between %t and %m.
llvm-svn: 246315
This patch adds a test for MIPS64R6 relocations, it corrects check
expressions for R_MIPS_26 and R_MIPS_PC16 relocations in MIPS64R2 test, and
it adds run for big endian in MIPS64R2 test.
Patch by Vladimir Radosavljevic.
Differential Revision: http://reviews.llvm.org/D11217
llvm-svn: 246311
This has been causing the prologue_end to be incorrectly positioned.
Patch by Vladimir Radosavljevic.
Differential Revision: http://reviews.llvm.org/D11293
llvm-svn: 246309
When combiner AA is enabled, look at stores on the same chain.
Non-aliasing stores are moved to the same chain so the existing
code fails because it expects to find an adajcent store on a consecutive
chain.
Because of how DAGCombiner tries these store combines,
MergeConsecutiveStores doesn't see the correct set of stores on the chain
when it visits the other stores. Each store individually has its chain
fixed before trying to merge consecutive stores, and then tries to merge
stores from that point before the other stores have been processed to
have their chains fixed. To fix this, attempt to use FindBetterChain
on any possibly neighboring stores in visitSTORE.
Suppose you have 4 32-bit stores that should be merged into 1 vector
store. One store would be visited first, fixing the chain. What happens is
because not all of the store chains have yet been fixed, 2 of the stores
are merged. The other 2 stores later have their chains fixed,
but because the other stores were already merged, they have different
memory types and merging the two different sized stores is not
supported and would be more difficult to handle.
llvm-svn: 246307
Summary:
This patch removes two remaining places where pointer value comparisons
are used to order functions: comparing range annotation metadata, and comparing
block address constants. (These are both rare cases, and so no actual
non-determinism was observed from either case).
The fix for range metadata is simple: the annotation always consists of a pair
of integers, so we just order by those integers.
The fix for block addresses is more subtle. Two constants are the same if they
are the same basic block in the same function, or if they refer to corresponding
basic blocks in each respective function. Note that in the first case, merging
is trivially correct. In the second, the correctness of merging relies on the
fact that the the values of block addresses cannot be compared. This change is
actually an enhancement, as these functions could not previously be merged (see
merge-block-address.ll).
There is still a problem with cross function block addresses, in that constants
pointing to a basic block in a merged function is not updated.
This also more robustly compares floating point constants by all fields of their
semantics, and fixes a dyn_cast/cast mixup.
Author: jrkoenig
Reviewers: dschuff, nlewycky, jfb
Subscribers llvm-commits
Differential revision: http://reviews.llvm.org/D12376
llvm-svn: 246305
handle more allocas with loads past the end of the alloca.
I suspect there are some related crashers with slightly different
patterns, but I'll fix those and add test cases as I find them.
Thanks to David Majnemer for the excellent test case reduction here.
Made this super simple to debug and fix.
llvm-svn: 246289
This patch includes a fix for a llvm-readobj test. With this patch,
the tool does no longer print out COFF headers for the short import
file, but that's probably desirable because the header for the short
import file is dummy.
llvm-svn: 246283
COFF short import files are special kind of files that contains only
DLL-exported symbol names. That's different from object files because
it has no data except symbol names.
This change implements a SymbolicFile interface for the short import
files so that symbol names can be accessed through that interface.
llvm-ar is now able to read the file and create symbol table entries
for short import files.
llvm-svn: 246276
Summary:
Change the coloring algorithm in WinEHPrepare to visit a funclet's exits
in its parents' contexts and so properly classify the continuations of
nested funclets.
Also change the placement of cloned blocks to be deterministic and to
maintain the relative order of each funclet's blocks.
Add a lit test showing various patterns that require cloning, the last
several of which don't have CHECKs yet because they require cloning
entire funclets which is NYI.
Reviewers: rnk, andrew.w.kaylor, majnemer
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D12353
llvm-svn: 246245
After hitting @llvm.assume(X) we can:
- propagate equality that X == true
- if X is icmp/fcmp (with eq operation), and one of operand
is constant we can change all variables with constants in the same BasicBlock
http://reviews.llvm.org/D11918
llvm-svn: 246243
Prior to this patch, we hadn't been marking StratifiedSets with the
appropriate StratifiedAttrs when handling the result of no-args call
instructions. This caused us to report NoAlias when handed, for
example, an escaped alloca and a result from an opaque function. Now we
properly mark the return value of said functions.
Thanks again to Chandler, Richard, and Nick for pinging me about this.
Differential review: http://reviews.llvm.org/D12408
llvm-svn: 246240
more than 2 instructions.
I introduced this regression a while back and did not noticed it because I
somehow forgot to push the initial test cases for the pass!
Fix that as well!
llvm-svn: 246239
llvm::splitCodeGen is a function that implements the core of parallel LTO
code generation. It uses llvm::SplitModule to split the module into linkable
partitions and spawning one code generation thread per partition. The function
produces multiple object files which can be linked in the usual way.
This has been threaded through to LTOCodeGenerator (and llvm-lto for testing
purposes). Separate patches will add parallel LTO support to the gold plugin
and lld.
Differential Revision: http://reviews.llvm.org/D12260
llvm-svn: 246236
We can now run 32-bit programs with empty catch bodies. The next step
is to change PEI so that we get funclet prologues and epilogues.
llvm-svn: 246235
Any call which is side effect free is trivially OK to speculate. We
already had similar logic in EarlyCSE and GVN but we were missing it
from isSafeToSpeculativelyExecute.
This fixes PR24601.
llvm-svn: 246232
Fixes PR24602: r245689 introduced an unguarded use of
SelectionDAG::FoldConstantArithmetic, which returns 0 when it fails
because of opaque (hoisted) constants.
llvm-svn: 246217
Constant propagation for single precision math functions (such as
tanf) is already working, but was not enabled. This patch enables
these for many single-precision functions, and adds respective test
cases.
Newly handled functions: acosf asinf atanf atan2f ceilf coshf expf
exp2f fabsf floorf fmodf logf log10f powf sinhf tanf tanhf
llvm-svn: 246194
This patch changes the analysis diagnostics produced when loops with
floating-point recurrences or memory operations are identified. The new messages
say "cannot prove it is safe to reorder * operations; allow reordering by
specifying #pragma clang loop vectorize(enable)". Depending on the type of
diagnostic the message will include additional options such as ffast-math or
__restrict__.
This patch also allows the vectorize(enable) pragma to override the low pointer
memory check threshold. When the hint is given a higher threshold is used.
See the clang patch for the options produced for each diagnostic.
llvm-svn: 246187
Constant propagation for single precision math functions (such as
tanf) is already working, but was not enabled. This patch enables
these for many single-precision functions, and adds respective test
cases.
Newly handled functions: acosf asinf atanf atan2f ceilf coshf expf
exp2f fabsf floorf fmodf logf log10f powf sinhf tanf tanhf
llvm-svn: 246186
Constant propagation for single precision math functions (such as
tanf) is already working, but was not enabled. This patch enables
these for many single-precision functions, and adds respective test
cases.
Newly handled functions: acosf asinf atanf atan2f ceilf coshf expf
exp2f fabsf floorf fmodf logf log10f powf sinhf tanf tanhf
llvm-svn: 246158
Unlike scalar operations, we can perform vector operations on element types that
are smaller than the native integer types. We type-promote scalar operations if
they are smaller than a native type (e.g., i8 arithmetic is promoted to i32
arithmetic on Arm targets). This patch detects and removes type-promotions
within the reduction detection framework, enabling the vectorization of small
size reductions.
In the legality phase, we look through the ANDs and extensions that InstCombine
creates during promotion, keeping track of the smaller type. In the
profitability phase, we use the smaller type and ignore the ANDs and extensions
in the cost model. Finally, in the code generation phase, we truncate the result
of the reduction to allow InstCombine to rewrite the entire expression in the
smaller type.
This fixes PR21369.
http://reviews.llvm.org/D12202
Patch by Matt Simpson <mssimpso@codeaurora.org>!
llvm-svn: 246149
Globals in address spaces other than one may have 0 as a valid address,
so we should not assume that they can be null.
Reviewed by Philip Reames.
llvm-svn: 246137
A release fence acts as a publication barrier for stores within the current thread to become visible to other threads which might observe the release fence. It does not require the current thread to observe stores performed on other threads. As a result, we can allow store-load and load-store forwarding across a release fence.
We do need to make sure that stores before the fence can't be eliminated even if there's another store to the same location after the fence. In theory, we could reorder the second store above the fence and *then* eliminate the former, but we can't do this if the stores are on opposite sides of the fence.
Note: While more aggressive then what's there, this patch is still implementing a really conservative ordering. In particular, I'm not trying to exploit undefined behavior via races, or the fact that the LangRef says only 'atomic' accesses are ordered w.r.t. fences.
Differential Revision: http://reviews.llvm.org/D11434
llvm-svn: 246134
When computing base pointers, we introduce new instructions to propagate the base of existing instructions which might not be bases. However, the algorithm doesn't make any effort to recognize when the new instruction to be inserted is the same as an existing one already in the IR. Since this is happening immediately before rewriting, we don't really have a chance to fix it after the pass runs without teaching loop passes about statepoints.
I'm really not thrilled with this patch. I've rewritten it 4 different ways now, but this is the best I've come up with. The case where the new instruction is just the original base defining value could be merged into the existing algorithm with some complexity. The problem is that we might have something like an extractelement from a phi of two vectors. It may be trivially obvious that the base of the 0th element is an existing instruction, but I can't see how to make the algorithm itself figure that out. Thus, I resort to the call to SimplifyInstruction instead.
Note that we can only adjust the instructions we've inserted ourselves. The live sets are still being tracked in side structures at this point in the code. We can't easily muck with instructions which might be in them. Long term, I'm really thinking we need to materialize the live pointer sets explicitly in the IR somehow rather than using side structures to track them.
Differential Revision: http://reviews.llvm.org/D12004
llvm-svn: 246133
This patch ensures that every analysis diagnostic produced by the vectorizer
will be printed if the loop has a vectorization hint on it. The condition has
also been improved to prevent printing when a disabling hint is specified.
llvm-svn: 246132
This is a one-line-change patch that moves the update to UnhandledWeights to the correct position: it should be updated for all clusters instead of just range clusters.
Differential Revision: http://reviews.llvm.org/D12391
llvm-svn: 246129
As Sanjoy pointed out over in http://reviews.llvm.org/D11819, a switch on an icmp should always be able to become a branch instruction. This patch generalizes that notion slightly to prove that the default case of a switch is unreachable if the cases completely cover all possible bit patterns in the condition. Once that's done, the switch to branch conversion kicks in just fine.
Note: Duplicate case values are disallowed by the LangRef and verifier.
Differential Revision: http://reviews.llvm.org/D11995
llvm-svn: 246125
Summary:
Let NVPTX backend detect integer min and max patterns during isel and emit intrinsics that enable hardware support.
Reviewers: jholewinski, meheff, jingyue
Subscribers: arsenm, llvm-commits, meheff, jingyue, eliben, jholewinski
Differential Revision: http://reviews.llvm.org/D12377
llvm-svn: 246107
Currently, when lowering switch statement and a new basic block is built for jump table / bit test header, the edge to this new block is not assigned with a correct weight. This patch collects the edge weight from all its successors and assign this sum of weights to the edge (and also the other fall-through edge). Test cases are adjusted accordingly.
Differential Revision: http://reviews.llvm.org/D12166#fae6eca7
llvm-svn: 246104
Things of note:
- Other linkage types aren't handled yet. We'll figure it out with dynamic linking.
- Special LLVM globals are either ignored, or error out for now.
- TLS isn't supported yet (WebAssembly will have threads later).
- There currently isn't a syntax for alignment, I left it in a comment so it's easy to hook up.
- Undef is convereted to whatever the type's appropriate null value is.
- assert versus report_fatal_error: follow what other AsmPrinters do, and assert only on what should have been caught elsewhere.
llvm-svn: 246092
This was causing problems when some functions use a GuardReg and some
don't as can happen when mixing SelectionDAG and FastISel generated
functions.
llvm-svn: 246075
If you're going to realign %sp to get object alignment properly (which
the code does), and stack offsets and alignments are calculated going
down from %fp (which they are), then the total stack size had better
be a multiple of the alignment. LLVM did indeed ensure that.
And then, after aligning, the sparc frame code added 96 (for sparcv8)
to the frame size, making any requested alignment of 64-bytes or
higher *guaranteed* to be misaligned. The test case added with r245668
even tests this exact scenario, and asserted the incorrect behavior,
which I somehow failed to notice. D'oh.
This change fixes the frame lowering code to align the stack size
*after* adding the spill area, instead.
Differential Revision: http://reviews.llvm.org/D12349
llvm-svn: 246042
This is a fix for disassembling unusual instruction sequences in 64-bit
mode w.r.t the CALL rel16 instruction. It might be desirable to move the
check somewhere else, but it essentially mimics the special case
handling with JCXZ in 16-bit mode.
The current behavior accepts the opcode size prefix and causes the
call's immediate to stop disassembling after 2 bytes. When debugging
sequences of instructions with this pattern, the disassembler output
becomes extremely unreliable and essentially useless (if you jump midway
into what lldb thinks is a unified instruction, you'll lose %rip). So we
ignore the prefix and consume all 4 bytes when disassembling a 64-bit
mode binary.
Note: in Vol. 2A 3-99 the Intel spec states that CALL rel16 is N.S. N.S.
is defined as:
Indicates an instruction syntax that requires an address override
prefix in 64-bit mode and is not supported. Using an address
override prefix in 64-bit mode may result in model-specific
execution behavior. (Vol. 2A 3-7)
Since 0x66 is an operand override prefix we should be OK (although we
may want to warn about 0x67 prefixes to 0xe8). On the CPUs I tested
with, they all ignore the 0x66 prefix in 64-bit mode.
Patch by Matthew Barney!
Differential Revision: http://reviews.llvm.org/D9573
llvm-svn: 246038
This was only added to preserve the old ScalarRepl's use of SSAUpdater
which was originally to avoid use of dominance frontiers. Now, we only
need a domtree, and we'll need a domtree right after this pass as well
and so it makes perfect sense to always and only use the dom-tree
powered mem2reg. This was flag-flipper earlier and has stuck reasonably
so I wanted to gut the now-dead code out of SROA before we waste more
time with it. Among other things, this will make passmanager porting
easier.
llvm-svn: 246028
The binaries containing the linked DWARF generated by dsymutil are not
standard relocatable object files like emitted did previsously. They should be
dSYM companion files, which means they have a different file type in the
header, but also a couple other peculiarities:
- they contain the segments and sections from the original binary in their
load commands, but not the actual contents. This means they get an address
and a size, but their offset is always 0 (but these are not virtual sections)
- they also conatin all the defined symbols from the original binary
This makes MC a really bad fit to emit these kind of binaries. The approach
that was used in this patch is to leverage MC's section layout for the
debug sections, but to use a replacement for MachObjectWriter that lives
in MachOUtils.cpp. Some of the low-level helpers from MachObjectWriter
were reused too.
llvm-svn: 246012
llvm-dsymutil needs to emit dSYM companion bundles. These are binary files
that replicate some of the orignal binary file properties (sections and
symbols). To get acces to these properties, pass the binary path in the
debug map.
llvm-svn: 246011
Summary: When comparing basic blocks, there is an additional check that two Value*'s should have the same ID, which interferes with merging equivalent constants of different kinds (such as a ConstantInt and a ConstantPointerNull in the included testcase). The cmpValues function already ensures that the two values in each function are the same, so removing this check should not cause incorrect merging.
Also, the type comparison is redundant, based on reviewing the code and testing on the test suite and several large LTO bitcodes.
Author: jrkoenig
Reviewers: nlewycky, jfb, dschuff
Subscribers: llvm-commits
Differential revision: http://reviews.llvm.org/D12302
llvm-svn: 246001
Summary:
This change makes the variable argument intrinsics, `llvm.va_start` and
`llvm.va_copy`, and the `va_arg` instruction behave as they do on Windows
inside a `CallingConv::X86_64_Win64` function. It's needed for a Clang patch
I have to add support for GCC's `__builtin_ms_va_list` constructs.
Reviewers: nadav, asl, eugenis
CC: llvm-commits
Differential Revision: http://llvm-reviews.chandlerc.com/D1622
llvm-svn: 245990
There was an issue in the test setup because the test requires an arch that
wasn't filtered by the lit.local.cfg, but given the set of bots that failed,
I'm not confident this is the (only) issue. So this commit also adds more
output to the test to help me track down the failure if it happens again.
Original commit message:
[dsymutil] Rewrite thumb triple names in user visible messages.
We autodetect triples from the input file(s) while reading the mach-o debug map.
As we need to create a Target from those triples, we always chose the thumb
variant (because the arm variant might not be 'instantiable' eg armv7m). The
user visible architecture names should still be 'arm' and not 'thumb' variants
though.
llvm-svn: 245988
Extend signed relational comparison instrumentation with a special
case for comparisons with -1. This fixes an MSan false positive when
such comparison is used as a sign bit test.
https://llvm.org/bugs/show_bug.cgi?id=24561
llvm-svn: 245980
When lowering switch statement, if bit tests are used then LLVM will always generates a jump to the default statement in the last bit test. However, this is not necessary when all cases in bit tests cover a contiguous range. This is because when generating the bit tests header MBB, there is a range check that guarantees cases in bit tests won't go outside of [low, high], where low and high are minimum and maximum case values in the bit tests. This patch checks if this is the case and then doesn't emit jump to default statement and hence saves a bit test and a branch.
Differential Revision: http://reviews.llvm.org/D12249
llvm-svn: 245976
This reverts commit r245960.
Multiple bots are failing on the new test. It seemd like llvm-dsymutil exits with an error. Investigating.
llvm-svn: 245964
We autodetect triples from the input file(s) while reading the mach-o debug map.
As we need to create a Target from those triples, we always chose the thumb
variant (because the arm variant might not be 'instantiable' eg armv7m). The
user visible architecture names should still be 'arm' and not 'thumb' variants
though.
llvm-svn: 245960
The loop minimum iterations check below ensures the loop has enough trip count so the generated
vector loop will likely be executed, and it covers the overflow check.
Differential Revision: http://reviews.llvm.org/D12107.
llvm-svn: 245952
This is a follow-on from the discussion in http://reviews.llvm.org/D12154.
This change allows memset/memcpy to use SSE or AVX memory accesses for any chip that has
generally fast unaligned memory ops.
A motivating use case for this change is a clang invocation that doesn't explicitly set
the CPU, but does target a feature that we know only exists on a CPU that supports fast
unaligned memops. For example:
$ clang -O1 foo.c -mavx
This resolves a difference in lowering noted in PR24449:
https://llvm.org/bugs/show_bug.cgi?id=24449
Before this patch, we used different store types depending on whether the example can be
lowered as a memset or not.
Differential Revision: http://reviews.llvm.org/D12288
llvm-svn: 245950
This fixes two issues in x86 fptoui lowering.
1) Makes conversions from f80 go through the right path on AVX-512.
2) Implements an inline sequence for fptoui i64 instead of a library
call. This improves performance by 6X on SSE3+ and 3X otherwise.
Incidentally, it also removes the use of ftol2 for fptoui, which was
wrong to begin with, as ftol2 converts to a signed i64, producing
wrong results for values >= 2^63.
Patch by: mitch.l.bodart@intel.com
Differential Revision: http://reviews.llvm.org/D11316
llvm-svn: 245924
It doesn't solve the problem, when for example we load something, and
then assume that it is the same as some constant value, because
globalopt will fail on unknown load instruction. The proposed solution
would be to skip some instructions that we can't evaluate and they are
safe to skip (f.e. load, assume and many others) and see if they are
required to perform optimization (f.e. we don't care about ephemeral
instructions that may appear using @llvm.assume())
http://reviews.llvm.org/D12266
llvm-svn: 245919
We might end up with a trivial copy as the addend, and if so, we should ignore
the corresponding FMA instruction. The trivial copy can be coalesced away later,
so there's nothing to do here. We should not, however, assert. Fixes PR24544.
llvm-svn: 245907
Summary: I forgot to squash git commits before doing an svn dcommit of D12219. Reverting, and re-submitting.
Subscribers: jfb, llvm-commits
Differential Revision: http://reviews.llvm.org/D12298
llvm-svn: 245886
This patch fixes PR24546, which demonstrates a segfault during the VSX
swap removal pass. The problem is that debug value instructions were
not excluded from the list of instructions to be analyzed for webs of
related computation. I've added the test case from the PR as a crash
test in test/CodeGen/PowerPC.
llvm-svn: 245862
The FP16_TO_FP node only uses the bottom 16 bits of its input, so the
following pattern can be optimised by removing the AND:
(FP16_TO_FP (AND op, 0xffff)) -> (FP16_TO_FP op)
This is a common pattern for ARM targets when functions have __fp16
arguments, as they are passed as floats (so that they get passed in the
correct registers), but then bitcast and truncated to ignore the top 16
bits.
llvm-svn: 245832
Not only do we not need to do anything to read correct values from the
object files, but the current logic actually wrongly applies twice the
section base address when there is no LoadedObjectInfo passed to the
DWARFContext creation (as the added test shows).
Simply do not apply any relocations on the mach-o debug info if there is
no load offset to apply.
llvm-svn: 245807
This patch adds all the refactored tests in new files, the old
tests will be removed by a followup commit.
Thanks to D. Blaikie for all the feedback.
llvm-svn: 245803
Summary:
WinEHPrepare is going to require that cleanuppad and catchpad produce values
of token type which are consumed by any cleanupret or catchret exiting the
pad. This change updates the signatures of those operators to require/enforce
that the type produced by the pads is token type and that the rets have an
appropriate argument.
The catchpad argument of a `CatchReturnInst` must be a `CatchPadInst` (and
similarly for `CleanupReturnInst`/`CleanupPadInst`). To accommodate that
restriction, this change adds a notion of an operator constraint to both
LLParser and BitcodeReader, allowing appropriate sentinels to be constructed
for forward references and appropriate error messages to be emitted for
illegal inputs.
Also add a verifier rule (noted in LangRef) that a catchpad with a catchpad
predecessor must have no other predecessors; this ensures that WinEHPrepare
will see the expected linear relationship between sibling catches on the
same try.
Lastly, remove some superfluous/vestigial casts from instruction operand
setters operating on BasicBlocks.
Reviewers: rnk, majnemer
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D12108
llvm-svn: 245797
Some debug info was drastically out of date, from the days where we used
to emit a list of length one (with a single null entry) rather than an
empty list (or, more recently, no list at all) for list fields that have
no elements.
llvm-svn: 245796
There was already a good error path for this. Added a test for it & made
a minor code change to ensure the error path was actually reached,
rather than crashing before we got that far.
llvm-svn: 245795
Summary:
__shared__ variable may now emit undef value as initializer, do not
throw error on that.
Test Plan: test/CodeGen/NVPTX/global-addrspace.ll
Patch by Xuetian Weng
Reviewers: jholewinski, tra, jingyue
Subscribers: llvm-commits, jholewinski
Differential Revision: http://reviews.llvm.org/D12242
llvm-svn: 245785
Summary:
Merge functions previously relied on unsigned comparisons of pointer values to
order functions. This caused observable non-determinism in the compiler for
large bitcode programs. Basically, opt -mergefuncs program.bc | md5sum produces
different hashes when run repeatedly on the same machine. Differing output was
observed on three large bitcodes, but it was less frequent on the smallest file.
It is possible that this only manifests on the large inputs, hence remaining
undetected until now.
This patch fixes this by removing (almost, see below) all places where
comparisons between pointers are used to order functions. Most of these changes
are local, but the comparison of global values requires assigning an identifier
to each local in the order it is visited. This is very similar to the way the
comparison function identifies Value*'s defined within a function. Because the
order of visiting the functions and their subparts is deterministic, the
identifiers assigned to the globals will be as well, and the order of functions
will be deterministic.
With these changes, there is no more observed non-determinism. There is also
only minor slowdowns (negligible to 4%) compared to the baseline, which is
likely a result of the fact that global comparisons involve hash lookups and not
just pointer comparisons.
The one caveat so far is that programs containing BlockAddress constants can
still be non-deterministic. It is not clear what the right solution is here. In
particular, even if the global numbers are used to order by function, we still
need a way to order the BasicBlock*'s. Unfortunately, we cannot just bail out
and fail to order the functions or consider them equal, because we require a
total order over functions. Note that programs with BlockAddress constants are
relatively rare, so the impact of leaving this in is minor as long as this pass
is opt-in.
Author: jrkoenig
Reviewers: nlewycky, jfb, dschuff
Subscribers: jevinskie, llvm-commits, chapuni
Differential revision: http://reviews.llvm.org/D12168
llvm-svn: 245762
SCEV expansion can invalidate previously expanded values. For example
in SCEVExpander::ReuseOrCreateCast, if we already have the requested
cast value but it's not at the desired location, a new cast is inserted
and the old cast will be invalidated.
Therefore, when expanding the bounds for the pointers, a later entry can
invalidate the IR value for an earlier one. The fix is to store a value
handle rather than the value itself.
The newly added test has a more detailed description of how the bug
triggers.
This bug can have a negative but potentially highly variable performance
impact in Loop Distribution. Because one of the bound values was
invalidated and is an undef expression now, InstCombine is free to
transform the array overlap check:
Start0 <= End1 && Start1 <= End0
into:
Start0 <= End1
So depending on the runtime location of the arrays, we would detect a
conflict and fall back on the original loop of the versioned loop.
Also tested compile time with SPEC2006 LTO bc files.
llvm-svn: 245760
We can wait on either VM, EXP or LGKM.
The waits are independent.
Without this patch, a wait inserted because of one of them
would also wait for all the previous others.
This patch makes s_wait only wait for the ones we need for the next
instruction.
Here's an example of subtle perf reduction this patch solves:
This is without the patch:
buffer_load_format_xyzw v[8:11], v0, s[44:47], 0 idxen
buffer_load_format_xyzw v[12:15], v0, s[48:51], 0 idxen
s_load_dwordx4 s[44:47], s[8:9], 0xc
s_waitcnt lgkmcnt(0)
buffer_load_format_xyzw v[16:19], v0, s[52:55], 0 idxen
s_load_dwordx4 s[48:51], s[8:9], 0x10
s_waitcnt vmcnt(1)
buffer_load_format_xyzw v[20:23], v0, s[44:47], 0 idxen
The s_waitcnt vmcnt(1) is useless.
The reason it is added is because the last
buffer_load_format_xyzw needs s[44:47], which was issued
by the first s_load_dwordx4. It waits for all VM
before that call to have finished.
Internally after every instruction, 3 counters (for VM, EXP and LGTM)
are updated after every instruction. For example buffer_load_format_xyzw
will
increase the VM counter, and s_load_dwordx4 the LGKM one.
Without the patch, for every defined register,
the current 3 counters are stored, and are used to know
how long to wait when an instruction needs the register.
Because of that, the s[44:47] counter includes that to use the register
you need to wait for the previous buffer_load_format_xyzw.
Instead this patch stores only the counters that matter for the
register,
and puts zero for the other ones, since we don't need any wait for them.
Patch by: Axel Davy
Differential Revision: http://reviews.llvm.org/D11883
llvm-svn: 245755
The original checkin was buggy, this change has a fix.
Original commit message:
[InstCombine] Transform A & (L - 1) u< L --> L != 0
Summary:
This transform is never a pessimization at the IR level (since it
replaces an `icmp` with another), and has potentiall payoffs:
1. It may make the `icmp` fold away or become loop invariant.
2. It may make the `A & (L - 1)` computation dead.
This shows up in Java, in range checks generated by array accesses of
the form `a[i & (a.length - 1)]`.
Reviewers: reames, majnemer
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D12210
llvm-svn: 245753
When PPCVSXFMAMutate would look at the input addend register, it would get its
input value number. This would fail, however, if the register was undef,
causing a segfault. Don't segfault (just skip such FMA instructions).
Fixes the test case from PR24542 (although that may have been over-reduced).
llvm-svn: 245741
See discussion in D12154 ( http://reviews.llvm.org/D12154 ), AMD Software
Optimization Guides for 10H/12H/15H/16H, and Agner Fog's experimental data.
llvm-svn: 245733
This will confirm that the patch in D12154 is actually NFC.
It will also confirm that the proposed changes for the AMD chips
are behaving as expected.
llvm-svn: 245704
This is intended to improve code generation for GEPs, as the index value is
shifted by the element size and in GEPs of multi-dimensional arrays the index
of higher dimensions is multiplied by the lower dimension size.
Differential Revision: http://reviews.llvm.org/D12197
llvm-svn: 245689
Note: I do not implement a base pointer, so it's still impossible to
have dynamic realignment AND dynamic alloca in the same function.
This also moves the code for determining the frame index reference
into getFrameIndexReference, where it belongs, instead of inline in
eliminateFrameIndex.
[Begin long-winded screed]
Now, stack realignment for Sparc is actually a silly thing to support,
because the Sparc ABI has no need for it -- unlike the situation on
x86, the stack is ALWAYS aligned to the required alignment for the CPU
instructions: 8 bytes on sparcv8, and 16 bytes on sparcv9.
However, LLVM unfortunately implements user-specified overalignment
using stack realignment support, so for now, I'm going to go along
with that tradition. GCC instead treats objects which have alignment
specification greater than the maximum CPU-required alignment for the
target as a separate block of stack memory, with their own virtual
base pointer (which gets aligned). Doing it that way avoids needing to
implement per-target support for stack realignment, except for the
targets which *actually* have an ABI-specified stack alignment which
is too small for the CPU's requirements.
Further unfortunately in LLVM, the default canRealignStack for all
targets effectively returns true, despite that implementing that is
something a target needs to do specifically. So, the previous behavior
on Sparc was to silently ignore the user's specified stack
alignment. Ugh.
Yet MORE unfortunate, if a target actually does return false from
canRealignStack, that also causes the user-specified alignment to be
*silently ignored*, rather than emitting an error.
(I started looking into fixing that last, but it broke a bunch of
tests, because LLVM actually *depends* on having it silently ignored:
some architectures (e.g. non-linux i386) have smaller stack alignment
than spilled-register alignment. But, the fact that a register needs
spilling is not known until within the register allocator. And by that
point, the decision to not reserve the frame pointer has been frozen
in place. And without a frame pointer, stack realignment is not
possible. So, canRealignStack() returns false, and
needsStackRealignment() then returns false, assuming everyone can just
go on their merry way assuming the alignment requirements were
probably just suggestions after-all. Sigh...)
Differential Revision: http://reviews.llvm.org/D12208
llvm-svn: 245668
The module splitter splits a module into linkable partitions. It will
be used to implement parallel LTO code generation.
This initial version of the splitter does not attempt to deal with the
somewhat subtle symbol visibility issues around module splitting. These
will be dealt with in a future change.
Differential Revision: http://reviews.llvm.org/D12132
llvm-svn: 245662
When producing conditional compare sequences for or operations we need
to negate the operands and the finally tested flags. The thing is if we negate
the finally tested flags this equals a logical negation of all previously
emitted expressions. There was a case missing where we have to order OR
expressions so they get emitted first.
This fixes http://llvm.org/PR24459
llvm-svn: 245641
Create CMP;CCMP sequences from and/or trees does not gain us anything if
the and/or tree is materialized to a GP register anyway. While most of
the code already checked for hasOneUse() there was one important case
missing.
llvm-svn: 245640
Summary:
This transform is never a pessimization at the IR level (since it
replaces an `icmp` with another), and has potentiall payoffs:
1. It may make the `icmp` fold away or become loop invariant.
2. It may make the `A & (L - 1)` computation dead.
This shows up in Java, in range checks generated by array accesses of
the form `a[i & (a.length - 1)]`.
Reviewers: reames, majnemer
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D12210
llvm-svn: 245635
Fixes PR23464: one way to use the broadcast intrinsics is:
_mm256_broadcastw_epi16(_mm_cvtsi32_si128(*(int*)src));
We don't currently fold this, but now that we use native IR for
the intrinsics (r245605), we can look through one bitcast to find
the broadcast scalar.
Differential Revision: http://reviews.llvm.org/D10557
llvm-svn: 245613
Summary:
Add an LSR test that exercises isTruncateFree. Without this change, LSR creates
another indvar representing the truncated value.
Reviewers: jholewinski, eliben
Subscribers: jholewinski, llvm-commits
Differential Revision: http://reviews.llvm.org/D12058
llvm-svn: 245611
Since r245605, the clang headers don't use these anymore.
r245165 updated some of the tests already; update the others, add
an autoupgrade, remove the intrinsics, and cleanup the definitions.
Differential Revision: http://reviews.llvm.org/D10555
llvm-svn: 245606
Instruction::dropUnknownMetadata(KnownSet) is supposed to preserve all
metadata in KnownSet, but the condition for DebugLocs was inverted.
Most users of dropUnknownMetadata() actually worked around this by not
adding LLVMContext::MD_dbg to their list of KnowIDs.
This is now made explicit.
llvm-svn: 245589
Caught by the famous "DebugLoc describes the currect SubProgram" assertion.
When GVN is removing a nonlocal load it updates the debug location of the
SSA value it replaced the load with with the one of the load. In the
testcase this actually overwrites a valid debug location with an empty one.
In reality GVN has to make an arbitrary choice between two equally valid
debug locations. This patch changes to behavior to only update the
location if the value doesn't already have a debug location.
llvm-svn: 245588
Summary: We know that -x & 1 is equivalent to x & 1, avoid using negation for testing if a negative integer is even or odd.
Reviewers: majnemer
Subscribers: junbuml, mssimpso, gberry, mcrosier, llvm-commits
Differential Revision: http://reviews.llvm.org/D12156
llvm-svn: 245569
COMISD should receive QWORD because it is defined as
(V)COMISD xmm1, xmm2/m64
COMISS should receive DWORD because it is defined as
(V)COMISS xmm1, xmm2/m32
Differential Revision: http://reviews.llvm.org/D11712
llvm-svn: 245551
Usually DSE is not supposed to remove lifetime intrinsics, but it's
actually ok to remove them for dead objects in terminating blocks,
because they convey no extra information there. Until we hit a lifetime
start that cannot be removed, that is. Because from that point on the
lifetime intrinsics become interesting again, e.g. for stack coloring.
Reviewers: reames
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D11710
llvm-svn: 245542
XVCMPEQDP is used for VSX v2f64 equality comparisons, but the value type needs
to be v2i64 (as that's the corresponding SETCC type).
Fixes PR24225.
llvm-svn: 245535
This DAGCombine was creating custom SDAG nodes with an illegal ppc_fp128
operand type because it was triggering on f64/f32 int2fp(fp2int(ppc_fp128 x)),
but shouldn't (it should only apply to f32/f64 types). The result was a crash.
llvm-svn: 245530
This commit modifies the serialization syntax so that the global IR values in
machine memory operands use the global value '@<name>' syntax instead of the
current '%ir.<name>' syntax.
The unnamed global IR values are handled by this commit as well, as the
existing global value parsing method can parse the unnamed globals already.
llvm-svn: 245527
The global IR values in machine memory operands should use the global value
'@<name>' syntax instead of the current '%ir.<name>' syntax.
However, the global value call entry pseudo source values use the global value
syntax already. Therefore, the syntax for the call entry pseudo source values
has to be changed so that the global values and call entry global value PSVs
can be parsed without ambiguities.
llvm-svn: 245526
We still need to add constant folding of vector comparisons to fold the tests for targets that don't support the respective min/max nodes
I needed to update 2011-12-06-AVXVectorExtractCombine to load a vector instead of using a constant vector to prevent it folding
Differential Revision: http://reviews.llvm.org/D12118
llvm-svn: 245503
We are already falling back to SelectionDAG when encountering an shift with UB.
This adds the same checks for shifts with UB that get folded into arithmetic or
logical operations.
This fixes rdar://problem/22345295.
llvm-svn: 245499
We don't do a great job with >= 0 comparisons against zero when the
result is used as an i8.
Given something like:
void f(long long LL, bool *B) {
*B = LL >= 0;
}
We used to generate:
shrq $63, %rdi
xorb $1, %dil
movb %dil, (%rsi)
Now we generate:
testq %rdi, %rdi
setns (%rsi)
Differential Revision: http://reviews.llvm.org/D12136
llvm-svn: 245498
Previously WebAssembly's datalayout string had -v128:8:128. This had been an
attempt to declare a certain level of support for unaligned SIMD accesses.
However, clang makes its own determinations for SIMD alignment that are
independent of the datalayout string, so this wasn't actually meaningful.
llvm-svn: 245494
Check to see if this is a CONCAT_VECTORS of a bunch of EXTRACT_SUBVECTOR operations. If so, and if the EXTRACT_SUBVECTOR vector inputs come from at most two distinct vectors the same size as the result, attempt to turn this into a legal shuffle.
Differential Revision: http://reviews.llvm.org/D12125
llvm-svn: 245490
This commit serializes the machine instruction's register operand ties.
The ties are printed out only when the instructon has register ties that are
different from the ties that are specified in the instruction's description.
llvm-svn: 245482
This revision has introduced an issue that only affects bootstrapped compiler
when it is printing the ASM. I am working on resolving the issue, but in the
meantime, I'm disabling the legalization of scalar_to_vector operation for v2i64
and the associated testing until I can get this fixed.
llvm-svn: 245481
The defined registers are already serialized - they are represented by placing
them before the '=' in a machine instruction. However, certain instructions like
INLINEASM can have defined register operands after the '=', so this commit
introduces the 'def' register flag for such operands.
llvm-svn: 245480
Reintroduce r245442. Remove an overly conservative assertion introduced
in r245442. We could replace the assertion to use `shareSameRegisterFile`
instead, but in that point in `insertPHI` we already lost the original
Def subreg to check against. So drop the assertion completely.
Original commit message:
- Teaches the ValueTracker in the PeepholeOptimizer to look through PHI
instructions.
- Add findNextSourceAndRewritePHI method to lookup into multiple sources
returnted by the ValueTracker and rewrite PHIs with new sources.
With these changes we can find more register sources and rewrite more
copies to allow coaslescing of bitcast instructions. Hence, we eliminate
unnecessary VR64 <-> GR64 copies in x86, but it could be extended to
other archs by marking "isBitcast" on target specific instructions. The
x86 example follows:
A:
psllq %mm1, %mm0
movd %mm0, %r9
jmp C
B:
por %mm1, %mm0
movd %mm0, %r9
jmp C
C:
movd %r9, %mm0
pshufw $238, %mm0, %mm0
Becomes:
A:
psllq %mm1, %mm0
jmp C
B:
por %mm1, %mm0
jmp C
C:
pshufw $238, %mm0, %mm0
Differential Revision: http://reviews.llvm.org/D11197
rdar://problem/20404526
llvm-svn: 245479
Since r244955, we try to use the short-form ErrorInfo when both
tries failed, and the long-form match failed on a suffix operand.
However, this means we sometimes mix ErrorInfo and MatchResult
(one manifestation of this being PR24498). Instead, restore both.
llvm-svn: 245469
This patch updates the X86 lowering so that the Exception Pointer and Selector
are 64-bit wide only if Subtarget.isTarget64BitLP64.
Patch by João Porto
Reviewers: dschuff, rnk
Differential Revision: http://reviews.llvm.org/D12111
llvm-svn: 245454
Reapply r243486.
- Teaches the ValueTracker in the PeepholeOptimizer to look through PHI
instructions.
- Add findNextSourceAndRewritePHI method to lookup into multiple sources
returnted by the ValueTracker and rewrite PHIs with new sources.
With these changes we can find more register sources and rewrite more
copies to allow coaslescing of bitcast instructions. Hence, we eliminate
unnecessary VR64 <-> GR64 copies in x86, but it could be extended to
other archs by marking "isBitcast" on target specific instructions. The
x86 example follows:
A:
psllq %mm1, %mm0
movd %mm0, %r9
jmp C
B:
por %mm1, %mm0
movd %mm0, %r9
jmp C
C:
movd %r9, %mm0
pshufw $238, %mm0, %mm0
Becomes:
A:
psllq %mm1, %mm0
jmp C
B:
por %mm1, %mm0
jmp C
C:
pshufw $238, %mm0, %mm0
Differential Revision: http://reviews.llvm.org/D11197
rdar://problem/20404526
llvm-svn: 245442
Summary:
The mid-end was generating vector smin/smax/umin/umax nodes, but
we were using vbsl to generatate the code. This adds the vmin/vmax
patterns and a test to check that we are now generating vmin/vmax
instructions.
Reviewers: rengolin, jmolloy
Subscribers: aemerson, rengolin, llvm-commits
Differential Revision: http://reviews.llvm.org/D12105
llvm-svn: 245439
There are some cases where the mul sequence is smaller, but for the most part,
using a div is preferable. This does not apply to vectors, since x86 doesn't
have vector idiv, and a vector mul/shifts sequence ought to be smaller than a
scalarized division.
Differential Revision: http://reviews.llvm.org/D12082
llvm-svn: 245431
Fix how DependenceAnalysis calls delinearization, mirroring what is done in
Delinearization.cpp (mostly by making sure to call getSCEVAtScope before
delinearizing, and by removing the unnecessary 'Pairs == 1' check).
Patch by Vaivaswatha Nagaraj!
llvm-svn: 245408
Here we make ScalarEvolution::isKnownPredicate, indirectly, a little smarter.
Given some relational comparison operator OP, and two AddRec SCEVs, {I,+,S} OP
{J,+,T}, we can reduce this to the comparison I OP J when S == T, both AddRecs
are for the same loop, and both are known not to wrap.
As it turns out, because of the way that backedge-guard expressions can be
leveraged when computing known predicates, this allows indvars to simplify the
if-statement comparison in this loop:
void foo (int *a, int *b, int n) {
for (int i = 0; i < n; ++i) {
if (i > n)
a[i] = b[i] + 1;
}
}
which, somewhat surprisingly, we were not previously optimizing away.
llvm-svn: 245400
This commit adds support for bit mask target flag serialization to the MIR
printer and the MIR parser. It also adds support for the machine operand's
target flag serialization to the AArch64 target.
Reviewers: Duncan P. N. Exon Smith
llvm-svn: 245383
To properly handle this, define the *a instructions as separate
instruction classes by refactoring the LoadA and StoreA multiclasses.
Move the instruction tests into the sparcv9 file to test the difference.
llvm-svn: 245360
The current code normalizes select(C0, x, select(C1, x, y)) towards
select(C0|C1, x, y) if the targets prefers that form. This patch adds an
additional rule that if the select(C1, x, y) part already exists in the
function then we want to normalize into the other direction because the
effects of reusing the existing value are bigger than transforming into
the target preferred form.
This addresses regressions following r238793, see also:
http://lists.cs.uiuc.edu/pipermail/llvm-commits/Week-of-Mon-20150727/290272.html
Differential Revision: http://reviews.llvm.org/D11616
llvm-svn: 245350
State numbers are calculated by performing a walk from the innermost
funclet to the outermost funclet. Rudimentary support for the new EH
constructs has been added to the assembly printer, just enough to test
the new machinery.
Differential Revision: http://reviews.llvm.org/D12098
llvm-svn: 245331
Summary: This is the correct way to handle JAL instructions when PIC is enabled.
Patch by Toma Tabacu
Reviewers: seanbruno, tomatabacu
Subscribers: brooks, seanbruno, emaste, llvm-commits
Differential Revision: http://reviews.llvm.org/D6231
llvm-svn: 245305
This is (almost) everything under MC/MachO/ARM. There are still some
cases missing, because llvm-readobj doesn't (yet) support some features,
that macho-dump provides. I plan to reduce the gap between them shortly.
llvm-svn: 245302
After hitting @llvm.assume(X) we can:
- propagate equality that X == true
- if X is icmp/fcmp (with eq operation), and one of operand
is constant we can change all variables with constants in the same BasicBlock
http://reviews.llvm.org/D11918
llvm-svn: 245265
It is possible to be in a situation where more than one funclet token is
a valid SSA value. If we see a terminator which exits a funclet which
doesn't use the funclet's token, replace it with unreachable.
Differential Revision: http://reviews.llvm.org/D12074
llvm-svn: 245238
Summary:
Increase the estimated costs for insert/extract element operations on
AArch64. This is motivated by results from benchmarking interleaved
accesses.
Add missing costs for zext/sext/trunc instructions and some integer to
floating point conversions. These costs were previously calculated
by scalarizing these operation and were affected by the cost increase of
the insert/extract element operations.
Reviewers: rengolin
Subscribers: mcrosier, aemerson, rengolin, llvm-commits
Differential Revision: http://reviews.llvm.org/D11939
llvm-svn: 245226
Summary:
This change limits the minimum cost of an insert/extract
element operation to 2 in cases where this would result
in mixing of NEON and VFP code.
Reviewers: rengolin
Subscribers: mssimpso, aemerson, llvm-commits, rengolin
Differential Revision: http://reviews.llvm.org/D12030
llvm-svn: 245225
Summary:
When demoting an SSA value that has a use on a phi and one of the phi's
predecessors terminates with catchret, the edge needs to be split and the
load inserted in the new block, else we'll still have a cross-funclet SSA
value.
Add a test for this, and for the similar case where a def to be spilled is
on and invoke and a critical edge, which was already implemented but
missing a test.
Reviewers: majnemer
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D12065
llvm-svn: 245218
Summary: It is the same as LA, except that it can also load 64-bit addresses and it only works on 64-bit MIPS architectures.
Reviewers: tomatabacu, seanbruno, vkalintiris
Subscribers: brooks, seanbruno, emaste, llvm-commits
Differential Revision: http://reviews.llvm.org/D9524
llvm-svn: 245208
These only get generated if the target supports them. If one of the variants is not legal and the other is, and it is safe to do so, the other variant will be emitted.
For example on AArch32 (V8), we have scalar fminnm but not fmin.
Fix up a couple of tests while we're here - one now produces better code, and the other was just plain wrong to start with.
llvm-svn: 245196
PR24469 resulted because DeleteDeadInstruction in handleNonLocalStoreDeletion was
deleting the next basic block iterator. Fixed the same by resetting the basic block iterator
post call to DeleteDeadInstruction.
llvm-svn: 245195
This change makes ScalarEvolution a stand-alone object and just produces
one from a pass as needed. Making this work well requires making the
object movable, using references instead of overwritten pointers in
a number of places, and other refactorings.
I've also wired it up to the new pass manager and added a RUN line to
a test to exercise it under the new pass manager. This includes basic
printing support much like with other analyses.
But there is a big and somewhat scary change here. Prior to this patch
ScalarEvolution was never *actually* invalidated!!! Re-running the pass
just re-wired up the various other analyses and didn't remove any of the
existing entries in the SCEV caches or clear out anything at all. This
might seem OK as everything in SCEV that can uses ValueHandles to track
updates to the values that serve as SCEV keys. However, this still means
that as we ran SCEV over each function in the module, we kept
accumulating more and more SCEVs into the cache. At the end, we would
have a SCEV cache with every value that we ever needed a SCEV for in the
entire module!!! Yowzers. The releaseMemory routine would dump all of
this, but that isn't realy called during normal runs of the pipeline as
far as I can see.
To make matters worse, there *is* actually a key that we don't update
with value handles -- there is a map keyed off of Loop*s. Because
LoopInfo *does* release its memory from run to run, it is entirely
possible to run SCEV over one function, then over another function, and
then lookup a Loop* from the second function but find an entry inserted
for the first function! Ouch.
To make matters still worse, there are plenty of updates that *don't*
trip a value handle. It seems incredibly unlikely that today GVN or
another pass that invalidates SCEV can update values in *just* such
a way that a subsequent run of SCEV will incorrectly find lookups in
a cache, but it is theoretically possible and would be a nightmare to
debug.
With this refactoring, I've fixed all this by actually destroying and
recreating the ScalarEvolution object from run to run. Technically, this
could increase the amount of malloc traffic we see, but then again it is
also technically correct. ;] I don't actually think we're suffering from
tons of malloc traffic from SCEV because if we were, the fact that we
never clear the memory would seem more likely to have come up as an
actual problem before now. So, I've made the simple fix here. If in fact
there are serious issues with too much allocation and deallocation,
I can work on a clever fix that preserves the allocations (while
clearing the data) between each run, but I'd prefer to do that kind of
optimization with a test case / benchmark that shows why we need such
cleverness (and that can test that we actually make it faster). It's
possible that this will make some things faster by making the SCEV
caches have higher locality (due to being significantly smaller) so
until there is a clear benchmark, I think the simple change is best.
Differential Revision: http://reviews.llvm.org/D12063
llvm-svn: 245193
If we can ignore NaNs, fmin/fmax libcalls can become compare and select
(this is what we turn std::min / std::max into).
This IR should then be optimized in the backend to whatever is best for
any given target. Eg, x86 can use minss/maxss instructions.
This should solve PR24314:
https://llvm.org/bugs/show_bug.cgi?id=24314
Differential Revision: http://reviews.llvm.org/D11866
llvm-svn: 245187
Bitwise arithmetic can obscure a simple sign-test. If replacing the
mask with a truncate is preferable if the type is legal because it
permits us to rephrase the comparison more explicitly.
llvm-svn: 245171
We can set additional bits in a mask given that we know the other
operand of an AND already has some bits set to zero. This can be more
efficient if doing so allows us to use an instruction which implicitly
sign extends the immediate.
This fixes PR24085.
Differential Revision: http://reviews.llvm.org/D11289
llvm-svn: 245169
Alex Lorenz