I believe I've covered all orderings of splat operands here. Better
canonicalization in lowering might help reduce this. I did not handle
the immediate adjustments needed for set(u)gt/set(u)lt.
Testing here is limited to byte types because the scalable vector
type used for masks for the store is calculated assuming 8 byte
elements. But for the setcc its based on the element count of the
container type for the setcc input. So they don't agree. We'll need
to enhanced D96352 to handle this I think.
Differential Revision: https://reviews.llvm.org/D96443
This patch extends the initial fixed-length vector support to include
smin, smax, umin, and umax.
Reviewed By: craig.topper
Differential Revision: https://reviews.llvm.org/D96491
The test cases extract a fixed element from a vector and splat it
into a vector. This gets DAG combined into a splat shuffle.
I've used some very wide vectors in the test to make sure we have
at least a couple tests where the element doesn't fit into the
uimm5 immediate of vrgather.vi so we fall back to vrgather.vx.
Reviewed By: frasercrmck
Differential Revision: https://reviews.llvm.org/D96186
This patch optimizes a build_vector "index sequence" and lowers it to
the existing custom RISCVISD::VID node. This pattern is common in
autovectorized code.
The custom node was updated to allow it to be used by both scalable and
fixed-length vectors, thus avoiding pattern duplication.
Reviewed By: craig.topper
Differential Revision: https://reviews.llvm.org/D96332
Define an option -riscv-vector-bits-max to specify the maximum vector
bits for vectorizer. Loop vectorizer will use the value to check if it
is safe to use the whole vector registers to vectorize the loop.
It is not the optimum solution for loop vectorizing for scalable vector.
It assumed the whole vector registers will be used to vectorize the code.
If it is possible, we should configure vl to do vectorize instead of
using whole vector registers.
We only consider LMUL = 1 in this patch.
This patch just an initial work for loop vectorizer for RISC-V Vector.
Differential Revision: https://reviews.llvm.org/D95659
Building on the fixed vector support from D95705
I've added ISD nodes for vmv.v.x and vfmv.v.f and switched to
lowering the intrinsics to it. This allows us to share the same
isel patterns for both.
This doesn't handle splats of i64 on RV32 yet. The build_vector
gets converted to a vXi32 build_vector+bitcast during type
legalization. Not sure the best way to handle this at the moment.
Differential Revision: https://reviews.llvm.org/D96108
This is an alternative to D95563.
This is modeled after a similar feature for AArch64's SVE that uses
predicated scalable vector instructions.a
Rather than use predication, this patch uses an explicit VL operand.
I've limited it to always use LMUL=1 for now, but we can improve this
in the future.
This requires a bunch of new ISD opcodes to carry the VL operand.
I think we can probably lower intrinsics to these ISD opcodes to
cut down on the size of the isel table. Which is why I've added
patterns for all integer/float types and not just LMUL=1.
I'm only testing one vector width right now, but the width is
programmable via the command line.
Reviewed By: frasercrmck
Differential Revision: https://reviews.llvm.org/D95705
This patch adds support for both the fadd reduction intrinsic, in both
the ordered and unordered modes.
The fmin and fmax intrinsics are not currently supported due to a
discrepancy between the LLVM semantics and the RVV ISA behaviour with
regards to signaling NaNs. This behaviour is likely fixed in version 2.3
of the RISC-V F/D/Q extension, but until then the intrinsics can be left
unsupported.
Reviewed By: craig.topper
Differential Revision: https://reviews.llvm.org/D95870
This patch adds support for the integer reduction intrinsics supported
by RVV. This excludes "mul" which has no corresponding instruction.
The reduction instructions in RVV have slightly complicated type
constraints given they always produce a single "M1" vector register.
They are lowered to custom nodes including the second "scalar" reduction
operand to simplify the patterns and in the hope that they can be useful
for future DAG combines.
Reviewed By: craig.topper
Differential Revision: https://reviews.llvm.org/D95620
This patch custom-legalizes all integer EXTRACT_VECTOR_ELT nodes where
SEW < XLEN to VMV_S_X nodes to help the compiler infer sign bits from
the result. This allows us to eliminate redundant sign extensions.
For parity, all integer EXTRACT_VECTOR_ELT nodes are legalized this way
so that we don't need TableGen patterns for some and not others.
Reviewed By: craig.topper
Differential Revision: https://reviews.llvm.org/D95741
We need to add a mask to the shift amount for these operations
to use the FSR/FSL instructions. We were previously doing this
in isel patterns, but custom lowering will make the mask
visible to optimizations earlier.
This patch adds support for the full range of vector int-to-float,
float-to-int, and float-to-float conversions on legal types.
Many conversions are supported natively in RVV so are lowered with
patterns. These include conversions between (element) types of the same
size, and those that are half/double the size of the input. When
conversions take place between types that are less than half or more
than double the size we must lower them using sequences of instructions
which go via intermediate types.
Reviewed By: craig.topper
Differential Revision: https://reviews.llvm.org/D95447
-Remove the ISD opcode for READ_VL. Just emit the MachineSDNode directly.
-Move segmented fault first only load intrinsic handling completely to
RISCVISelDAGToDAG.cpp and emit the ReadVL MachineSDNode there
instead of lowering to ISD opcodes first.
Original patch by @rogfer01.
This patch adds support for insertelt and extractelt operations on
scalable vectors.
Special care must be taken on RV32 when dealing with i64 vectors as
there are no straightforward ways to insert a 64-bit element without a
register of that size. To that end, both are custom-lowered to different
sequences.
Authored-by: Roger Ferrer Ibanez <rofirrim@gmail.com>
Co-Authored-by: Fraser Cormack <fraser@codeplay.com>
Reviewed By: craig.topper
Differential Revision: https://reviews.llvm.org/D94615
This makes our i8/i16 codegen more similar to the i32 codegen.
I've also added computeKnownBits support for DIVUW/REMUW so
that we can remove zero extending ANDs from the output. Without
this we end up turning DIVUW/REMUW back into DIVU/REMU via some
isel patterns.
Reviewed By: frasercrmck, luismarques
Differential Revision: https://reviews.llvm.org/D95322
As far as I know 32 bits arguments and returns on RV64 are always
sign extended to i64. So I think we should be taking this into
account around libcalls.
Reviewed By: luismarques
Differential Revision: https://reviews.llvm.org/D95285
The fault-only-first-load instructions can reduce VL if an element
other than element 0 triggers a memory fault. This can be used to
vectorize loops with data dependent exit conditions like strcmp or
strlen.
This patch adds a VL output to these intrinsics so that the new
VL value can be captured by software. This will be expanded to
'csrr gpr, vl' after the vleff instruction during SelectionDAG.
By doing this with one intrinsic we are able to guarantee that the
csrr reads the VL value produced by the vleff instruction. Having
it as a separate intrinsic would make it impossible to guarantee
ordering without making every other vector intrinsic have side
effects.
The intrinsics are expanded during lowering into two ISD nodes
that are glued together. These ISD nodes will go
through isel separately, but should maintain the glue so that they
get emitted adjacently by InstrEmitter.
I've only ran the chain through the vleff instruction, allowing
the READ_VL to be deleted if it is unused.
Reviewed By: HsiangKai
Differential Revision: https://reviews.llvm.org/D94286
For Zvlsseg, we need continuous vector registers for the values. We need
to define new register classes for the different combinations of (number
of fields and LMUL). For example,
when the number of fields(NF) = 3, LMUL = 2, the values will be assigned
to (V0M2, V2M2, V4M2), (V2M2, V4M2, V6M2), (V4M2, V6M2, V8M2), ...
We define the vlseg intrinsics with multiple outputs. There is no way to
describe the codegen patterns with multiple outputs in the tablegen
files. We do the codegen in RISCVISelDAGToDAG and use EXTRACT_SUBREG to
extract the values of output.
The multiple scalable vector values will be put into a struct. This
patch is depended on the support for scalable vector struct.
Differential Revision: https://reviews.llvm.org/D94229
Original patch by @rogfer01.
This patch adds support for sign-, zero-, and any-extension from
scalable mask vector types to integer vector types, as well as
truncation in the opposite direction.
Authored-by: Roger Ferrer Ibanez <rofirrim@gmail.com>
Co-Authored-by: Fraser Cormack <fraser@codeplay.com>
Reviewed By: craig.topper
Differential Revision: https://reviews.llvm.org/D94590
Original patch by @rogfer01.
This patch supports vector truncates, which on RVV must be done in a
series of instructions truncating by one power-of-two at a time. This is
done through custom-lowering and a custom node to avoid LLVM
re-combining the split TRUNCATE nodes.
Authored-by: Roger Ferrer Ibanez <rofirrim@gmail.com>
Co-Authored-by: Fraser Cormack <fraser@codeplay.com>
Reviewed By: craig.topper
Differential Revision: https://reviews.llvm.org/D94796
SimplifyDemandedBits can remove set bits from immediates from instructions
like AND/OR/XOR. This can prevent them from being efficiently
codegened on RISCV.
This adds an initial version that tries to keep or form 12 bit
sign extended immediates for AND operations to enable use of ANDI.
If that doesn't work we'll try to create a 32 bit sign extended immediate
to use LUI+ADDIW.
More optimizations are possible for different size immediates or
different operations. But this is a good starting point that already
has test coverage.
Reviewed By: frasercrmck
Differential Revision: https://reviews.llvm.org/D94628
Some FP compares expand to a sequence ending with (xor X, 1) to invert the result. If
the consumer is a select_cc we can likely get rid of this xor by fixing
up the select_cc condition.
This patch combines (select_cc (xor X, 1), 0, setne, trueV, falseV) -
(select_cc X, 0, seteq, trueV, falseV) if we can prove X is 0/1.
Reviewed By: lenary
Differential Revision: https://reviews.llvm.org/D94546
This patch custom lowers ISD::VSCALE into a csrr vlenb followed
by a shift right by 3 followed by a multiply by the scale amount.
I've added computeKnownBits support to indicate that the csrr vlenb
always produces 3 trailng bits of 0s so the shift right is "exact".
This allows the shift and multiply sequence to be nicely optimized
into a single shift or removed completely when the scale amount is
a power of 2.
The non power of 2 case multiplying by 24 is still producing
suboptimal code. We could remove the right shift and use a
multiply by 3. Hopefully we can improve DAG combine to fix that
since it's not unique to this sequence.
This replaces D94144.
Reviewed By: HsiangKai
Differential Revision: https://reviews.llvm.org/D94249
This patch extends the SDNode ISel support for RVV from only the
vector/vector instructions to include the vector/scalar and
vector/immediate forms.
It uses splat_vector to carry the scalar in each case, except when
XLEN<SEW (RV32 SEW=64) when a custom node `SPLAT_VECTOR_I64` is used for
type-legalization and to encode the fact that the value is sign-extended
to SEW. When the scalar is a full 64-bit value we use a sequence to
materialize the constant into the vector register.
The non-intrinsic ISel patterns have also been split into their own
file.
Authored-by: Roger Ferrer Ibanez <rofirrim@gmail.com>
Co-Authored-by: Fraser Cormack <fraser@codeplay.com>
Reviewed By: craig.topper
Differential Revision: https://reviews.llvm.org/D93312
This patch enables jump table lowering in the RISC-V backend.
In addition to the test case included, the new lowering was
tested by compiling the OCaml runtime and running it under qemu.
Differential Revision: https://reviews.llvm.org/D92097
This adds intrinsics for vmv.x.s and vmv.s.x.
I've used stricter type constraints on these intrinsics than what we've been doing on the arithmetic intrinsics so far. This will allow us to not need to pass the scalar type to the Intrinsic::getDeclaration call when creating these intrinsics.
A custom ISD is used for vmv.x.s in order to implement the change in computeNumSignBitsForTargetNode which can remove sign extends on the result.
I also modified the MC layer description of these instructions to show the tied source/dest operand. This is different than what we do for masked instructions where we drop the tied source operand when converting to MC. But it is a more accurate description of the instruction. We can't do this for masked instructions since we use the same MC instruction for masked and unmasked. Tools like llvm-mca operate in the MC layer and rely on ins/outs and Uses/Defs for analysis so I don't know if we'll be able to maintain the current behavior for masked instructions. So I went with the accurate description here since it was easy.
Reviewed By: frasercrmck
Differential Revision: https://reviews.llvm.org/D93365
We work with @rogfer01 from BSC to come out this patch.
Authored-by: Roger Ferrer Ibanez <rofirrim@gmail.com>
Co-Authored-by: ShihPo Hung <shihpo.hung@sifive.com>
Co-Authored-by: Monk Chiang <monk.chiang@sifive.com>
Reviewed By: craig.topper
Differential Revision: https://reviews.llvm.org/D93366
Rather than having a different opcode for RV32 and RV64. Let's just say the integer type is XLenVT and use a single opcode for both modes.
Differential Revision: https://reviews.llvm.org/D92538
Start with an assumption that FMA is faster than Fmul+FAdd. If thats not true
on some particular implementation we can add a tuning parameter in the future.
I've update the fmuladd test cases and added new test cases for fast math flag
based contraction.
Differential Revision: https://reviews.llvm.org/D91987
This adds custom opcodes for FSLW/FSRW so we can type legalize
fshl/fshr without needing to match a sign_extend_inreg.
I've used the operand order from fshl/fshr to make the isel
pattern similar to the non-W form. It was also hard to decide
another order since the register instruction has the shift amount
as the second operand, but the immediate instruction has it as
the third operand.
Differential Revision: https://reviews.llvm.org/D91479
This should result in better utilization of RORIW since we
don't need to look for a SIGN_EXTEND_INREG that may not exist.
Also remove rotl/rotr isel matching to GREVI and just prefer RORI.
This is to keep consistency so we don't have to match ROLW/RORW
to GREVIW as well. I imagine RORI/RORIW performance will be the
same or better than GREVI.
Differential Revision: https://reviews.llvm.org/D91449
This moves the recognition of GREVI and GORCI from TableGen patterns
into a DAGCombine. This is done primarily to match "deeper" patterns in
the future, like (grevi (grevi x, 1) 2) -> (grevi x, 3).
TableGen is not best suited to matching patterns such as these as the compile
time of the DAG matchers quickly gets out of hand due to the expansion of
commutative permutations.
Reviewed By: craig.topper
Differential Revision: https://reviews.llvm.org/D91259
... to shift/add or shift/sub.
Do not enable it on riscv32 with the M extension where decomposeMulByConstant
may not be an optimization.
Reviewed By: luismarques, MaskRay
Differential Revision: https://reviews.llvm.org/D82660
Currently, some fairly arbitrary subset of overriden methods in
RISCVISelLowering are private rather than public (which is the
visibility they have in TargetLowering). I suspect this is a holdover
from too closely copying another backend.
D78545 pointed out this can be difficult for some downstream patches,
and nobody has come forward to suggest a reason for keeping the
visibility as-is.
This commit simply makes all overridden methods match the public
visiblity of the parent.
Differential Revision: https://reviews.llvm.org/D79928
Summary:
The current lowering of `select` on RISC-V uses a branch instruction to load a
register with one or other value. This is inefficient, especially in the case of
small constants that can be computed easily.
By implementing the TargetLowering::convertSelectOfConstantsToMath hook, some of
the simpler cases are covered that let us avoid introducing a branch in these
cases.
Reviewed By: luismarques
Differential Revision: https://reviews.llvm.org/D79260
Summary:
Currently, the comparison argument used for ATOMIC_CMP_XCHG is legalised
with GetPromotedInteger, which leaves the upper bits of the value
undefind. Since this is used for comparing in an LR/SC loop with a
full-width comparison, we must sign extend it. We introduce a new
getExtendForAtomicCmpSwapArg to complement getExtendForAtomicOps, since
many targets have compare-and-swap instructions (or pseudos) that
correctly handle an any-extend input, and the existing function
determines the extension of the result, whereas we are concerned with
the input.
This is related to https://reviews.llvm.org/D58829, which solved the
issue for ATOMIC_CMP_SWAP_WITH_SUCCESS, but not the simpler
ATOMIC_CMP_SWAP.
Reviewers: asb, lenary, efriedma
Reviewed By: asb
Subscribers: arichardson, hiraditya, rbar, johnrusso, simoncook, sabuasal, niosHD, kito-cheng, shiva0217, MaskRay, zzheng, edward-jones, rogfer01, MartinMosbeck, brucehoult, the_o, rkruppe, jfb, PkmX, jocewei, psnobl, benna, Jim, s.egerton, pzheng, sameer.abuasal, apazos, luismarques, evandro, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D74453
Floating point positive zero can be selected using fmv.w.x / fmv.d.x /
fcvt.d.w and the zero source register.
Differential Revision: https://reviews.llvm.org/D75729
Implement TargetLowering callback mayBeEmittedAsTailCall for riscv in CodeGenPrepare,
which will duplicate return instructions to enable tailcall optimization.
Differential Revision: https://reviews.llvm.org/D73699
Only PPC seems to be using it, and only checks some simple cases and
doesn't distinguish between FP. Just switch to using LLT to simplify
use from GlobalISel.
Summary: The hook should work for any RISC-V register. Non-allocatable registers
do not need to be reserved, for the remaining the hook will only succeed
if you pass clang the -ffixed-xX flag. This builds upon D67185, which
currently only allows reserving GPRs.
Reviewers: asb, lenary
Reviewed By: lenary
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D69130
This adds support for reserving GPRs such that the compiler will not
choose a register for register allocation. The implementation follows
the same design as for AArch64; each reserved register becomes a target
feature and used for getting the reserved registers for a given
MachineFunction. The backend checks that it does not need to write to
any reserved register; if it does a relevant error is generated.
Differential Revision: https://reviews.llvm.org/D67185
The patch fixed the issue that RV64 didn't clear the upper bits
when return complex floating value with lp64 ABI.
float _Complex
complex_add(float _Complex a, float _Complex b)
{
return a + b;
}
RealResult = zero_extend(RealA + RealB)
ImageResult = ImageA + ImageB
Return (RealResult | (ImageResult << 32))
The patch introduces shouldExtendTypeInLibCall target hook to suppress
the AssertZext generation when lowering floating LibCall.
Thanks to Eli's comments from the Bugzilla
https://bugs.llvm.org/show_bug.cgi?id=42820
Differential Revision: https://reviews.llvm.org/D65497
llvm-svn: 370275
This allows arguments with the constraint A to be lowered to input nodes
for RISC-V, which implies a memory address stored in a register.
This patch adds the minimal amount of code required to get operands with
the right constraints to compile.
https://reviews.llvm.org/D54296
llvm-svn: 369095
Summary:
This adds the 'f' inline assembly constraint, as supported by GCC. An
'f'-constrained operand is passed in a floating point register. Exactly
which kind of floating-point register (32-bit or 64-bit) is decided
based on the operand type and the available standard extensions (-f and
-d, respectively).
This patch adds support in both the clang frontend, and LLVM itself.
Reviewers: asb, lewis-revill
Reviewed By: asb
Subscribers: hiraditya, rbar, johnrusso, simoncook, apazos, sabuasal, niosHD, kito-cheng, shiva0217, jrtc27, MaskRay, zzheng, edward-jones, rogfer01, MartinMosbeck, brucehoult, the_o, rkruppe, PkmX, jocewei, psnobl, benna, Jim, s.egerton, cfe-commits, llvm-commits
Tags: #clang, #llvm
Differential Revision: https://reviews.llvm.org/D65500
llvm-svn: 367403
Defines RISCV registers for getExceptionPointerRegister() and
getExceptionSelectorRegister().
Differential Revision: https://reviews.llvm.org/D63411
Patch by Edward Jones.
Modified by Alex Bradbury to add CHECK lines to exception-pointer-register.ll.
llvm-svn: 365301
On RISC-V, the `cycle` CSR holds a 64-bit count of the number of clock
cycles executed by the core, from an arbitrary point in the past. This
matches the intended semantics of `@llvm.readcyclecounter()`, which we
currently leave to the default lowering (to the constant 0).
With this patch, we will now correctly lower this intrinsic to the
intended semantics, using the user-space instruction `rdcycle`. On
64-bit targets, we can directly lower to this instruction.
On 32-bit targets, we need to do more, as `rdcycle` only returns the low
32-bits of the `cycle` CSR. In this case, we perform a custom lowering,
based on the PowerPC lowering, using `rdcycleh` to obtain the high
32-bits of the `cycle` CSR. This custom lowering inserts a new basic
block which detects overflow in the high 32-bits of the `cycle` CSR
during reading (because multiple instructions are required to read). The
emitted assembly matches the suggested assembly in the RISC-V
specification.
Differential Revision: https://reviews.llvm.org/D64125
llvm-svn: 365201
This patch adds lowering for global TLS addresses for the TLS models of
InitialExec, GlobalDynamic, LocalExec and LocalDynamic.
LocalExec support required using a 4-operand add instruction, which uses
the fourth operand to express a relocation on the symbol. The necessary
fixup is emitted when the instruction is emitted.
Differential Revision: https://reviews.llvm.org/D55305
llvm-svn: 363771
Summary:
DAGCombine will normally turn a `(shl (add x, c1), c2)` into `(add (shl x, c2), c1 << c2)`, where `c1` and `c2` are constants. This can be prevented by a callback in TargetLowering.
On RISC-V, materialising the constant `c1 << c2` can be more expensive than materialising `c1`, because materialising the former may take more instructions, and may use a register, where materialising the latter would not.
This patch implements the hook in RISCVTargetLowering to prevent this transform, in the cases where:
- `c1` fits into the immediate field in an `addi` instruction.
- `c1` takes fewer instructions to materialise than `c1 << c2`.
In future, DAGCombine could do the check to see whether `c1` fits into an add immediate, which might simplify more targets hooks than just RISC-V.
Reviewers: asb, luismarques, efriedma
Reviewed By: asb
Subscribers: xbolva00, lebedev.ri, craig.topper, lewis-revill, Jim, hiraditya, rbar, johnrusso, simoncook, apazos, sabuasal, niosHD, kito-cheng, shiva0217, jrtc27, zzheng, edward-jones, rogfer01, MartinMosbeck, brucehoult, the_o, rkruppe, PkmX, jocewei, psnobl, benna, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D62857
llvm-svn: 363736
Some GEPs were not being split, presumably because that split would just be
undone by the DAGCombiner. Not performing those splits can prevent important
optimizations, such as preventing the element indices / member offsets from
being (partially) folded into load/store instruction immediates. This patch:
- Makes the splits also occur in the cases where the base address and the GEP
are in the same BB.
- Ensures that the DAGCombiner doesn't reassociate them back again.
Differential Revision: https://reviews.llvm.org/D60294
llvm-svn: 363544
This patch allows lowering of PIC addresses by using PC-relative
addressing for DSO-local symbols and accessing the address through the
global offset table for non-DSO-local symbols.
Differential Revision: https://reviews.llvm.org/D55303
llvm-svn: 363058
This validates and lowers arguments to inline asm nodes which have the
constraints I, J & K, with the following semantics (equivalent to GCC):
I: Any 12-bit signed immediate.
J: Immediate integer zero only.
K: Any 5-bit unsigned immediate.
Differential Revision: https://reviews.llvm.org/D54093
llvm-svn: 363054
Summary:
This allows some integer bitwise operations to instead be performed by
hardware fp instructions. This is correct because the RISC-V spec
requires the F and D extensions to use the IEEE-754 standard
representation, and fp register loads and stores to be bit-preserving.
This is tested against the soft-float ABI, but with hardware float
extensions enabled, so that the tests also ensure the optimisation also
fires in this case.
Reviewers: asb, luismarques
Reviewed By: asb
Subscribers: hiraditya, rbar, johnrusso, simoncook, apazos, sabuasal, niosHD, kito-cheng, shiva0217, jrtc27, zzheng, edward-jones, rogfer01, MartinMosbeck, brucehoult, the_o, rkruppe, PkmX, jocewei, psnobl, benna, Jim, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D62900
llvm-svn: 362790
When not optimizing for minimum size (-Oz) we custom lower wide shifts
(SHL_PARTS, SRA_PARTS, SRL_PARTS) instead of expanding to a libcall.
Differential Revision: https://reviews.llvm.org/D59477
llvm-svn: 358498
This patch adds an implementation of a PC-relative addressing sequence to be
used when -mcmodel=medium is specified. With absolute addressing, a 'medium'
codemodel may cause addresses to be out of range. This is because while
'medium' implies a 2 GiB addressing range, this 2 GiB can be at any offset as
opposed to 'small', which implies the first 2 GiB only.
Note that LLVM/Clang currently specifies code models differently to GCC, where
small and medium imply the same functionality as GCC's medlow and medany
respectively.
Differential Revision: https://reviews.llvm.org/D54143
Patch by Lewis Revill.
llvm-svn: 357393
Indicates in the TargetLowering interface that conversions from CC logic to
bitwise logic are allowed. Adds tests that show the benefit when optimization
opportunities are detected. Also adds tests that show that when the optimization
is not applied correct code is generated (but opportunities for other
optimizations remain).
Differential Revision: https://reviews.llvm.org/D59596
Patch by Luís Marques.
llvm-svn: 356740
AtomicCmpSwapWithSuccess is legalised into an AtomicCmpSwap plus a comparison.
This requires an extension of the value which, by default, is a
zero-extension. When we later lower AtomicCmpSwap into a PseudoCmpXchg32 and then expanded in
RISCVExpandPseudoInsts.cpp, the lr.w instruction does a sign-extension.
This mismatch of extensions causes the comparison to fail when the compared
value is negative. This change overrides TargetLowering::getExtendForAtomicOps
for RISC-V so it does a sign-extension instead.
Differential Revision: https://reviews.llvm.org/D58829
Patch by Ferran Pallarès Roca.
llvm-svn: 355869
This requires a little extra work due tothe fact i32 is not a legal type. When
call lowering happens post-legalisation (e.g. when an intrinsic was inserted
during legalisation). A bitcast from f32 to i32 can't be introduced. This is
similar to the challenges with RV32D. To handle this, we introduce
target-specific DAG nodes that perform bitcast+anyext for f32->i64 and
trunc+bitcast for i64->f32.
Differential Revision: https://reviews.llvm.org/D53235
llvm-svn: 352807
Follow the same custom legalisation strategy as used in D57085 for
variable-length shifts (see that patch summary for more discussion). Although
we may lose out on some late-stage DAG combines, I think this custom
legalisation strategy is ultimately easier to reason about.
There are some codegen changes in rv64m-exhaustive-w-insts.ll but they are all
neutral in terms of the number of instructions.
Differential Revision: https://reviews.llvm.org/D57096
llvm-svn: 352171
The previous DAG combiner-based approach had an issue with infinite loops
between the target-dependent and target-independent combiner logic (see
PR40333). Although this was worked around in rL351806, the combiner-based
approach is still potentially brittle and can fail to select the 32-bit shift
variant when profitable to do so, as demonstrated in the pr40333.ll test case.
This patch instead introduces target-specific SelectionDAG nodes for
SHLW/SRLW/SRAW and custom-lowers variable i32 shifts to them. pr40333.ll is a
good example of how this approach can improve codegen.
This adds DAG combine that does SimplifyDemandedBits on the operands (only
lower 32-bits of first operand and lower 5 bits of second operand are read).
This seems better than implementing SimplifyDemandedBitsForTargetNode as there
is no guarantee that would be called (and it's not for e.g. the anyext return
test cases). Also implements ComputeNumSignBitsForTargetNode.
There are codegen changes in atomic-rmw.ll and atomic-cmpxchg.ll but the new
instruction sequences are semantically equivalent.
Differential Revision: https://reviews.llvm.org/D57085
llvm-svn: 352169
to reflect the new license.
We understand that people may be surprised that we're moving the header
entirely to discuss the new license. We checked this carefully with the
Foundation's lawyer and we believe this is the correct approach.
Essentially, all code in the project is now made available by the LLVM
project under our new license, so you will see that the license headers
include that license only. Some of our contributors have contributed
code under our old license, and accordingly, we have retained a copy of
our old license notice in the top-level files in each project and
repository.
llvm-svn: 351636
DAGTypeLegalizer::PromoteSetCCOperands currently prefers to zero-extend
operands when it is able to do so. For some targets this is more expensive
than a sign-extension, which is also a valid choice. Introduce the
isSExtCheaperThanZExt hook and use it in the new SExtOrZExtPromotedInteger
helper. On RISC-V, we prefer sign-extension for FromTy == MVT::i32 and ToTy ==
MVT::i64, as it can be performed using a single instruction.
Differential Revision: https://reviews.llvm.org/D52978
llvm-svn: 347977
Utilise a similar ('late') lowering strategy to D47882. The changes to
AtomicExpandPass allow this strategy to be utilised by other targets which
implement shouldExpandAtomicCmpXchgInIR.
All cmpxchg are lowered as 'strong' currently and failure ordering is ignored.
This is conservative but correct.
Differential Revision: https://reviews.llvm.org/D48131
llvm-svn: 347914
r343712 performed this optimisation during instruction selection. As Eli
Friedman pointed out in post-commit review, implementing this as a DAGCombine
might allow opportunities for further optimisations.
llvm-svn: 343741
Introduce a new RISCVExpandPseudoInsts pass to expand atomic
pseudo-instructions after register allocation. This is necessary in order to
ensure that register spills aren't introduced between LL and SC, thus breaking
the forward progress guarantee for the operation. AArch64 does something
similar for CmpXchg (though only at O0), and Mips is moving towards this
approach (see D31287). See also [this mailing list
post](http://lists.llvm.org/pipermail/llvm-dev/2016-May/099490.html) from
James Knight, which summarises the issues with lowering to ll/sc in IR or
pre-RA.
See the [accompanying RFC
thread](http://lists.llvm.org/pipermail/llvm-dev/2018-June/123993.html) for an
overview of the lowering strategy.
Differential Revision: https://reviews.llvm.org/D47882
llvm-svn: 342534
This function is not virtual, it is private and it is not called anywhere. No
regression is introduced by removing it.
I think we can safely remove it.
Differential Revision: https://reviews.llvm.org/D50836
llvm-svn: 340024
- Save/restore only registers that are used.
This includes Callee saved registers and Caller saved registers
(arguments and temporaries) for integer and FP registers.
- If there is a call in the interrupt handler, save/restore all
Caller saved registers (arguments and temporaries) and all FP registers.
- Emit special return instructions depending on "interrupt"
attribute type.
Based on initial patch by Zhaoshi Zheng.
Reviewers: asb
Reviewed By: asb
Subscribers: rkruppe, the_o, MartinMosbeck, brucehoult, rbar, johnrusso, simoncook, sabuasal, niosHD, kito-cheng, shiva0217, zzheng, edward-jones, mgrang, rogfer01, llvm-commits
Differential Revision: https://reviews.llvm.org/D48411
llvm-svn: 338047
Fences are inserted according to table A.6 in the current draft of version 2.3
of the RISC-V Instruction Set Manual, which incorporates the memory model
changes and definitions contributed by the RISC-V Memory Consistency Model
task group.
Instruction selection failures will now occur for 8/16/32-bit atomicrmw and
cmpxchg operations when targeting RV32IA until lowering for these operations
is added in a follow-on patch.
Differential Revision: https://reviews.llvm.org/D47589
llvm-svn: 334591
I'm unable to construct a representative test case that demonstrates the
advantage, but it seems sensible to report accurate target-specific
information regardless.
llvm-svn: 330938
This has no impact on codegen for the current RISC-V unit tests or my small
benchmark set and very minor changes in a few programs in the GCC torture
suite. Based on this, I haven't been able to produce a representative test
program that demonstrates a benefit from isLegalAddressingMode. I'm committing
the patch anyway, on the basis that presenting accurate information to the
target-independent code is preferable to relying on incorrect generic
assumptions.
llvm-svn: 330932
fadd.d is required in order to force floating point registers to be used in
test code, as parameters are passed in integer registers in the soft float
ABI.
Much of this patch is concerned with support for passing f64 on RV32D with a
soft-float ABI. Similar to Mips, introduce pseudoinstructions to build an f64
out of a pair of i32 and to split an f64 to a pair of i32. BUILD_PAIR and
EXTRACT_ELEMENT can't be used, as a BITCAST to i64 would be necessary, but i64
is not a legal type.
llvm-svn: 329871
Includes support for expanding va_copy. Also adds support for using 'aligned'
registers when necessary for vararg calls, and ensure the frame pointer always
points to the bottom of the vararg spill region. This is necessary to ensure
that the saved return address and stack pointer are always available at fixed
known offsets of the frame pointer.
Differential Revision: https://reviews.llvm.org/D40805
llvm-svn: 322215
The TableGen-based calling convention definitions are inflexible, while
writing a function to implement the calling convention is very
straight-forward, and allows difficult cases to be handled more easily. With
this patch adds support for:
* Passing large scalars according to the RV32I calling convention
* Byval arguments
* Passing values on the stack when the argument registers are exhausted
The custom CC_RISCV calling convention is also used for returns.
This patch also documents the ABI lowering that a language frontend is
expected to perform. I would like to work to simplify these requirements over
time, but this will require further discussion within the LLVM community.
We add PendingArgFlags CCState, as a companion to PendingLocs.
The PendingLocs vector is used by a number of backends to handle arguments
that are split during legalisation. However CCValAssign doesn't keep track of
the original argument alignment. Therefore, add a PendingArgFlags vector which
can be used to keep track of the ISD::ArgFlagsTy for every value added to
PendingLocs.
Differential Revision: https://reviews.llvm.org/D39898
llvm-svn: 320359
Previous patches primarily ensured that codegen was possible for the standard
RISC-V instructions. However, there are a number of IR inputs that wouldn't be
appropriately lowered. This patch both adds test cases and supports lowering
for a number of these cases:
* Improved sext/zext/trunc support
* Support for setcc variants that don't map directly to RISC-V instructions
* Lowering mul, and hence support for external symbols
* addc, adde, subc, sube
* mulhs, srem, mulhu, urem, udiv, sdiv
* {srl,sra,shl}_parts
* brind
* br_jt
* bswap, ctlz, cttz, ctpop
* rotl, rotr
* BlockAddress operands
Differential Revision: https://reviews.llvm.org/D29938
llvm-svn: 318737
Although ISD::SELECT_CC is a more natural match for RISCVISD::SELECT_CC (and
ultimately the integer RISC-V conditional branch instructions), we choose to
expand ISD::SELECT_CC and lower ISD::SELECT. The appropriate compare+branch
will be created in the case where an ISD::SELECT condition value is created by
an ISD::SETCC node, which operates on XLen types. Other datatypes such as
floating point don't have conditional branch instructions, and lowering
ISD::SELECT allows more flexibility for handling these cases.
Differential Revision: https://reviews.llvm.org/D29937
llvm-svn: 318735
All these headers already depend on CodeGen headers so moving them into
CodeGen fixes the layering (since CodeGen depends on Target, not the
other way around).
llvm-svn: 318490
Note that this is just enough for simple function call examples to generate
working code. Support for varargs etc follows in future patches.
Differential Revision: https://reviews.llvm.org/D29936
llvm-svn: 317691
Craig Topper