This fixes PR32471.
As comment 10 on that bug report highlights
(https://bugs.llvm.org//show_bug.cgi?id=32471#c10), there are quite a
few different defendable design tradeoffs that could be made, including
not representing pointers at all in LLT.
I decided to go for representing vector-of-pointer as a concept in LLT,
while keeping the size of the LLT type 64 bits (this is an increase from
48 bits before). My rationale for keeping pointers explicit is that on
some targets probably it's very handy to have the distinction between
pointer and non-pointer (e.g. 68K has a different register bank for
pointers IIRC). If we keep a scalar pointer, it probably is easiest to
also have a vector-of-pointers to keep LLT relatively conceptually clean
and orthogonal, while we don't have a very strong reason to break that
orthogonality. Once we gain more experience on the use of LLT, we can
of course reconsider this direction.
Rejecting vector-of-pointer types in the IRTranslator is also an option
to avoid the crash reported in PR32471, but that is only a very
short-term solution; also needs quite a bit of code tweaks in places,
and is probably fragile. Therefore I didn't consider this the best
option.
llvm-svn: 300664
Summary:
VersionPrinter by default outputs information about the Host CPU
and Default target. Printing this information requires linking in
a large amount of data, such as supported target triples as C
strings, which in turn bloats the binary size.
Enable a new CMake option LLVM_VERSION_PRINTER_SHOW_HOST_TARGET_INFO
which controls printing of the host and target info. This allows
the target triple names to be dead-code stripped. This is a nice
win for LLVM clients that wish to minimize their binary size, such
as graphics drivers.
By default this is ON, so there is no change in the default behavior.
Clients who wish to suppress this printing can do so by setting this
option to off via CMake.
A test app on Linux that uses ParseCommandLineOptions() shows a binary
size reduction of 23KB (from 149K to 126K) for a Release build, and 24KB
(from 135K to 111K) in a MinSizeRel build.
Reviewers: klimek, beanz, bogner, chandlerc, compnerd
Reviewed By: compnerd
Patch by pammon (Peter Ammon) !
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D30904
llvm-svn: 300630
This patch uses lshrInPlace to replace code where the object that lshr is called on is being overwritten with the result.
This adds an lshrInPlace(const APInt &) version as well.
Differential Revision: https://reviews.llvm.org/D32155
llvm-svn: 300566
This reverts r300535 and r300537.
The newly added tests in test/CodeGen/AArch64/GlobalISel/arm64-fallback.ll
produces slightly different code between LLVM versions being built with different compilers.
E.g., dependent on the compiler LLVM is built with, either one of the following
can be produced:
remark: <unknown>:0:0: unable to legalize instruction: %vreg0<def>(p0) = G_EXTRACT_VECTOR_ELT %vreg1, %vreg2; (in function: vector_of_pointers_extractelement)
remark: <unknown>:0:0: unable to legalize instruction: %vreg2<def>(p0) = G_EXTRACT_VECTOR_ELT %vreg1, %vreg0; (in function: vector_of_pointers_extractelement)
Non-determinism like this is clearly a bad thing, so reverting this until
I can find and fix the root cause of the non-determinism.
llvm-svn: 300538
This fixes PR32471.
As comment 10 on that bug report highlights
(https://bugs.llvm.org//show_bug.cgi?id=32471#c10), there are quite a
few different defendable design tradeoffs that could be made, including
not representing pointers at all in LLT.
I decided to go for representing vector-of-pointer as a concept in LLT,
while keeping the size of the LLT type 64 bits (this is an increase from
48 bits before). My rationale for keeping pointers explicit is that on
some targets probably it's very handy to have the distinction between
pointer and non-pointer (e.g. 68K has a different register bank for
pointers IIRC). If we keep a scalar pointer, it probably is easiest to
also have a vector-of-pointers to keep LLT relatively conceptually clean
and orthogonal, while we don't have a very strong reason to break that
orthogonality. Once we gain more experience on the use of LLT, we can
of course reconsider this direction.
Rejecting vector-of-pointer types in the IRTranslator is also an option
to avoid the crash reported in PR32471, but that is only a very
short-term solution; also needs quite a bit of code tweaks in places,
and is probably fragile. Therefore I didn't consider this the best
option.
llvm-svn: 300535
This merges the two different multiword shift right implementations into a single version located in tcShiftRight. lshrInPlace now calls tcShiftRight for the multiword case.
I retained the memmove fast path from lshrInPlace and used a memset for the zeroing. The for loop is basically tcShiftRight's implementation with the zeroing and the intra-shift of 0 removed.
Differential Revision: https://reviews.llvm.org/D32114
llvm-svn: 300503
This was throwing an assert because we determined the intra-word shift amount by subtracting the size of the full word shift from the total shift amount. But we failed to account for the fact that we clipped the full word shifts by total words first. To fix this just calculate the intra-word shift as the remainder of dividing by bits per word.
llvm-svn: 300405
The ErrorOr should not be dereferenced on the error path.
Patch by Jacob Young
Reviewers: tejohnson
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D32032
llvm-svn: 300267
Switch from Euclid's algorithm to Stein's algorithm for computing GCD. This
avoids the (expensive) APInt division operation in favour of bit operations.
Remove all memory allocation from within the GCD loop by tweaking our `lshr`
implementation so it can operate in-place.
Differential Revision: https://reviews.llvm.org/D31968
llvm-svn: 300252
Summary:
APInt is currently implemented with an unsigned BitWidth field first and then a uint_64/pointer union. Due to the 64-bit size of the union there is a hole after the bitwidth.
Putting the union first allows the class to be packed. Making it 12 bytes instead of 16 bytes. An APSInt goes from 20 bytes to 16 bytes.
This shows a 4k reduction on the size of the opt binary on my local x86-64 build. So this enables some other improvement to the code as well.
Reviewers: dblaikie, RKSimon, hans, davide
Reviewed By: davide
Subscribers: davide, llvm-commits
Differential Revision: https://reviews.llvm.org/D32001
llvm-svn: 300171
On FreeBSD backtrace is not part of libc and depends on libexecinfo
being available. Instead of using manual checks we can use the builtin
CMake module FindBacktrace.cmake to detect availability of backtrace()
in a portable way.
Patch By: Alex Richardson
Differential Revision: https://reviews.llvm.org/D27143
llvm-svn: 300062
This shares detection logic with ARM(32), since AArch64 capable CPUs may
also run in 32-bit system mode.
We observe weird /proc/cpuinfo output for MSM8992 and MSM8994, where
they report all CPU cores as one single model, depending on which CPU
core the kernel is running on. As a workaround, we hardcode the known
CPU part name for these SoCs.
For big.LITTLE systems, this patch would only return the part name of
the first core (usually the little core). Proper support will be added
in a follow-up change.
Differential Revision: D31675
llvm-svn: 299458
This patch is one step to attempt to unify the main APInt interface and the tc functions used by APFloat.
This patch adds a WordType to APInt and uses that in all the tc functions. I've added temporary typedefs to APFloat to alias it to integerPart to keep the patch size down. I'll work on removing that in a future patch.
In future patches I hope to reuse the tc functions to implement some of the main APInt functionality.
I may remove APINT_ from BITS_PER_WORD and WORD_SIZE constants so that we don't have the repetitive APInt::APINT_ externally.
Differential Revision: https://reviews.llvm.org/D31523
llvm-svn: 299341
Summary:
GreatestComonDivisor currently makes a copy of both its inputs. Then in the loop we do one move and two copies, plus any allocation the urem call does.
This patch changes it to take its inputs by value so that we can do a move of any rvalue inputs instead of copying. Then in the loop we do 3 move assignments and no copies. This way the only possible allocations we have in the loop is from the urem call.
Reviewers: dblaikie, RKSimon, hans
Reviewed By: dblaikie
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D31572
llvm-svn: 299314
We do not want to close STDOUT as there may have been several uses of it
such as the case: llc %s -o=- -pass-remarks-output=- -filetype=asm
which cause multiple closes of STDOUT_FILENO and/or use-after-close of it.
Using dup() in getFD doesn't work as we end up with original STDOUT_FILENO
open anyhow.
reviewed by Rafael Espindola
Differential Revision: https://reviews.llvm.org/D31505
llvm-svn: 299098
This reverts r299062, which caused build failures on Windows.
It also reverts the attempts to fix the windows builds in r299064 and r299065.
The introduction of namespace llvm::sys::detail makes MSVC, and seemingly also
mingw, complain about ambiguity with the existing namespace llvm::detail.
E.g.:
C:\b\slave\sanitizer-windows\llvm\include\llvm/Support/MathExtras.h(184): error C2872: 'detail': ambiguous symbol
C:\b\slave\sanitizer-windows\llvm\include\llvm/Support/PointerLikeTypeTraits.h(31): note: could be 'llvm::detail'
C:\b\slave\sanitizer-windows\llvm\include\llvm/Support/Host.h(80): note: or 'llvm::sys::detail'
In r299064 and r299065 I tried to fix these ambiguities, based on the errors
reported in the log files. It seems however that the build stops early when
this kind of error is encountered, and many build-then-fix-iterations on
Windows may be needed to fix this. Therefore reverting r299062 for now to
get the build working again on Windows.
llvm-svn: 299066
This refactors getHostCPUName so that for the architectures that get the
host cpu info on linux from /proc/cpuinfo, the /proc/cpuinfo parsing
logic is present in the build, even if it wasn't built on a linux system
for that architecture.
Since the code is present in the build, we can then test that code also
on other systems, i.e. we don't need to have buildbots setup for all
architectures on linux to be able to test this. Instead, developers will
test this as part of the regression test run.
As an example, a few unit tests are added to test getHostCPUName for ARM
running linux. A unit test is preferred over a lit-based test, since the
expectation is that in the future, the functionality here will grow over
what can be tested with "llc -mcpu=native".
This is a preparation step to enable implementing the range of
improvements discussed on PR30516, such as adding AArch64 support,
support for big.LITTLE systems, reducing code duplication.
Differential Revision: https://reviews.llvm.org/D31236
llvm-svn: 299060
Several static functions from the signal API can be invoked
simultaneously; RemoveFileOnSignal for instance can be called indirectly
by multiple parallel loadModule() invocations, which might lead to
the assertion:
Assertion failed: (NumRegisteredSignals < array_lengthof(RegisteredSignalInfo) && "Out of space for signal handlers!"),
function RegisterHandler, file /llvm/lib/Support/Unix/Signals.inc, line 105.
RemoveFileOnSignal calls RegisterHandlers(), which isn't currently
mutex protected, leading to the behavior above. This potentially affect
a few other users of RegisterHandlers() too.
rdar://problem/30381224
llvm-svn: 298871
This method is pretty new and probably isn't use much in the code base so this should have a negligible size impact. The OR and XOR operators are already inline.
llvm-svn: 298870
Summary:
It should return <0, 0, or >0 for less-than, equal, and greater-than like
strcmp() (according to the history, it used to be implemented with
strcmp()) but it actually returned 0, or 1 for not-equal and equal.
Reviewers: qcolombet
Reviewed By: qcolombet
Subscribers: qcolombet, llvm-commits
Differential Revision: https://reviews.llvm.org/D30996
llvm-svn: 298844
This is something of an edge case, but when the $HOME environment
variable is not set, we can still look in the password database
to get the current user's home directory.
Added a test for this by getting the value of $HOME, then unsetting
it, then calling home_directory() and verifying that it succeeds
and that the value is the same as what we originally read from
the environment.
llvm-svn: 298513
In doing so, clean up the MD5 interface a little. Most
existing users only care about the lower 8 bytes of an MD5,
but for some users that care about the upper and lower,
there wasn't a good interface. Furthermore, consumers
of the MD5 checksum were required to handle endianness
details on their own, so it seems reasonable to abstract
this into a nicer interface that just gives you the right
value.
Differential Revision: https://reviews.llvm.org/D31105
llvm-svn: 298322
This is a safeguard against data loss if the user specifies a directory
that is not a cache directory. Teach the existing cache pruning clients
to create files with appropriate names.
Differential Revision: https://reviews.llvm.org/D31109
llvm-svn: 298271
I'm not sure if zeroing VAL before writing pVal is really necessary, but at least one other place did it in code.
But by taking the store out of line, this reduces the opt binary by about 20k on my local x86-64 build.
llvm-svn: 298233
Go back to behavior pre-r231309 and reduce the timeout from 8 to ~1.5
min now that we have (a) PCMCache mechanism (r298165) and (b) timeout
that doesn't cause a failure, but actually build the module (r298175).
rdar://problem/30297862
llvm-svn: 298176
Previously which path syntax we supported dependend on what
platform we were compiling LLVM on. While this is normally
desirable, there are situations where we need to be able to
handle a path that we know was generated on a remote host.
Remote debugging, for example, or parsing debug info.
99% of the code in LLVM for handling paths was platform
agnostic and literally just a few branches were gated behind
pre-processor checks, so this changes those sites to use
runtime checks instead, and adds a flag to every path
API that allows one to override the host native syntax.
Differential Revision: https://reviews.llvm.org/D30858
llvm-svn: 298004
This change adds support for functions to set and get file permissions, in a similar manner to the C++17 permissions() function in <filesystem>. The setter uses chmod on Unix systems and SetFileAttributes on Windows, setting the permissions as passed in. The getter simply uses the existing status() function.
Prior to this change, status() would always return an unknown value for the permissions on a Windows file, making it impossible to test the new function on Windows. I have therefore added support for this as well. On Linux, prior to this change, the permissions included the file type, which should actually be accessed via a different member of the file_status class.
Note that on Windows, only the *_write permission bits have any affect - if any are set, the file is writable, and if not, the file is read-only. This is in common with what MSDN describes for their behaviour of std::filesystem::permissions(), and also what boost::filesystem does.
The motivation behind this change is so that we can easily test behaviour on read-only files in LLVM unit tests, but I am sure that others may find it useful in some situations.
Reviewers: zturner, amccarth, aaron.ballman
Differential Revision: https://reviews.llvm.org/D30736
llvm-svn: 297945
The idea is that the policy string fully specifies the policy and is portable
between clients.
Differential Revision: https://reviews.llvm.org/D31020
llvm-svn: 297927
Change the function that implements the pruning into a free function that
takes the policy as a struct argument.
Differential Revision: https://reviews.llvm.org/D31009
llvm-svn: 297907
Previously we did not have support for writing detailed
module information for each module, as well as the symbol
records. This patch adds support for this, and in doing
so enables the ability to construct minimal PDBs from
just a few lines of YAML. A test is added to illustrate
this functionality.
llvm-svn: 297900
Previously, if you attempted to write a key/value pair and the
value was equal to the key's default value, we would not output
the value. Sometimes it is useful to be able to see this value
in the output anyway.
llvm-svn: 297864
Summary:
Previously, ParseCommandLineOptions returns false and ignores error messages
when IgnoreErrors. It would be useful to also return error messages if users
decide to check parsing result instead of having the program exit on error.
Reviewers: chandlerc, mehdi_amini, rnk
Reviewed By: rnk
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D30893
llvm-svn: 297810
Previously, it created a temporary directory and then failed when
FileOutputBuffer tried to rename that file to the destination file
(which is actually a directory name).
Differential Revision: https://reviews.llvm.org/D30912
llvm-svn: 297679
If raw_fd_ostream is constructed with the path of "-", it claims
ownership of the stdout file descriptor. This means that it closes
stdout when it is destroyed. If there are multiple users of
raw_fd_ostream wrapped around stdout, then a crash can occur because
of operations on a closed stream.
An example of this would be running something like "clang -S -o - -MD
-MF - test.cpp". Alternatively, using outs() (which creates a local
version of raw_fd_stream to stdout) anywhere combined with such a
stream usage would cause the crash.
The fix duplicates the stdout file descriptor when used within
raw_fd_ostream, so that only that particular descriptor is closed when
the stream is destroyed.
Patch by James Henderson!
llvm-svn: 297624
In openFileForRead, we would not previously return an error
if real_path resolution failed. After a recent patch, we
started propagating this error up. This caused a failure
in clang when trying to call openFileForRead("nul"). This
patch restores the previous behavior of not propagating this
error up.
llvm-svn: 297488
LLVM already has real_path like functionality, but it is
cumbersome to use and involves clean up after (e.g. you have
to call openFileForRead, then close the resulting FD).
Furthermore, on Windows it doesn't work for directories since
opening a directory and opening a file require slightly
different flags.
So I add a simple function `real_path` which works for all
paths on all platforms and has a simple to use interface.
In doing so, I add the ability to opt in to resolving tilde
expressions (e.g. ~/foo), which are normally handled by
the shell.
Differential Revision: https://reviews.llvm.org/D30668
llvm-svn: 297483
We currently have to insert bits via a temporary variable of the same size as the target with various shift/mask stages, resulting in further temporary variables, all of which require the allocation of memory for large APInts (MaskSizeInBits > 64).
This is another of the compile time issues identified in PR32037 (see also D30265).
This patch adds the APInt::insertBits() helper method which avoids the temporary memory allocation and masks/inserts the raw bits directly into the target.
Differential Revision: https://reviews.llvm.org/D30780
llvm-svn: 297458
We already have a function create_directories() which can create
an entire tree, and remove() which can remove an empty directory,
but we do not have remove_directories() which can remove an entire
tree. This patch adds such a function.
Because removing a directory tree can have dangerous consequences
when the tree contains a directory symlink, the patch here updates
the existing directory_iterator construct to optionally not follow
symlinks (previously it would always follow symlinks). The delete
algorithm uses this flag so that for symlinks, only the links are
removed, and not the targets.
On Windows this is implemented with SHFileOperation, which also
does not recurse into symbolic links or junctions.
Differential Revision: https://reviews.llvm.org/D30676
llvm-svn: 297314
This was originall reverted due to some test failures in
ModuleCache and TestCompDirSymlink. These issues have all
been resolved and the code now passes all tests.
Differential Revision: https://reviews.llvm.org/D30698
llvm-svn: 297300
Summary:
This will allow future patches to inspect the details of the LLT. The implementation is now split between
the Support and CodeGen libraries to allow TableGen to use this class without introducing layering concerns.
Thanks to Ahmed Bougacha for finding a reasonable way to avoid the layering issue and providing the version of this patch without that problem.
The problem with the previous commit appears to have been that TableGen was including CodeGen/LowLevelType.h instead of Support/LowLevelTypeImpl.h.
Reviewers: t.p.northover, qcolombet, rovka, aditya_nandakumar, ab, javed.absar
Subscribers: arsenm, nhaehnle, mgorny, dberris, llvm-commits, kristof.beyls
Differential Revision: https://reviews.llvm.org/D30046
llvm-svn: 297241
Move the __try/__except block outside of the set_thread_name function to avoid a conflict with object unwinding due to the use of the llvm::Storage.
Differential Revision: https://reviews.llvm.org/D30707
llvm-svn: 297192
More module problems. This time it only showed up in the stage 2 compile of
clang-x86_64-linux-selfhost-modules-2 but not the stage 1 compile.
Somehow, this change causes the build to need Attributes.gen before it's been
generated.
llvm-svn: 297188
Summary:
This will allow future patches to inspect the details of the LLT. The implementation is now split between
the Support and CodeGen libraries to allow TableGen to use this class without introducing layering concerns.
Thanks to Ahmed Bougacha for finding a reasonable way to avoid the layering issue and providing the version of this patch without that problem.
Reviewers: t.p.northover, qcolombet, rovka, aditya_nandakumar, ab, javed.absar
Subscribers: arsenm, nhaehnle, mgorny, dberris, llvm-commits, kristof.beyls
Differential Revision: https://reviews.llvm.org/D30046
llvm-svn: 297177
This extends an earlier change that did similar for add and sub operations.
With this first patch we lose the fastpath for the single word case as operator&= and friends don't support it. This can be added there if we think that's important.
I had to change some functions in the APInt class since the operator overloads were moved out of the class and can't be used inside the class now. The getBitsSet change collides with another outstanding patch to implement it with setBits. But I didn't want to make this patch dependent on that series.
I've also removed the Or, And, Xor functions which were rarely or never used. I already commited two changes to remove the only uses of Or that existed.
Differential Revision: https://reviews.llvm.org/D30612
llvm-svn: 297121
This deletes LLDB's FileType enumeration and replaces all
users, and all calls to functions that check whether a file
exists etc with corresponding calls to LLVM.
Differential Revision: https://reviews.llvm.org/D30624
llvm-svn: 297116
Summary:
There are quite a few places in the code base that do something like the following to set the high or low bits in an APInt.
KnownZero |= APInt::getHighBitsSet(BitWidth, BitWidth - 1);
For BitWidths larger than 64 this creates a short lived APInt with malloced storage. I think it might even call malloc twice. Its better to just provide methods that can set the necessary bits without the temporary APInt.
I'll update usages that benefit in a separate patch.
Reviewers: majnemer, MatzeB, davide, RKSimon, hans
Reviewed By: hans
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D30525
llvm-svn: 297111
Do not include <sys/user.h> on NetBSD. It's dead file and will be removed.
No need to include <sys/sysctl.h> in this code context on NetBSD.
llvm-svn: 296973
pthread_self() returns a pthread_t, but we were setting it to
an int. It seems the cast to int when calling sysctl is still
the correct thing to do, though.
llvm-svn: 296892
Doing so defines the type llvm::thread. On FreeBSD, we need
to call a macro which references its own ::thread type, which
causes an ambiguity due to ADL when inside of the llvm namespace.
Since we don't even need this unless LLVM_ENABLE_THREADS == 1,
we don't even need this type anyway, as it is always equal to
std::thread, so we can just use that directly.
llvm-svn: 296891
Applications often need the current thread id when making
system calls, and some operating systems provide the notion
of a thread name, which can be useful in enabling better
diagnostics when debugging or logging.
This patch adds an accessor for the thread id, and "best effort"
getters and setters for the thread name. Since this is
non critical functionality, no error is returned to indicate
that a platform doesn't support thread names.
Differential Revision: https://reviews.llvm.org/D30526
llvm-svn: 296887
After several smaller patches to get most of the core improvements
finished up, this patch is a straight move and header fixup of
the source.
Differential Revision: https://reviews.llvm.org/D30266
llvm-svn: 296810
Original commit message:
"Allow externally dlopen-ed libraries to be registered as permanent libraries.
This is also useful in cases when llvm is in a shared library. First we dlopen
the llvm shared library and then we register it as a permanent library in order
to keep the JIT and other services working.
Patch reviewed by Vedant Kumar (D29955)!"
llvm-svn: 296774
Summary:
This patch moves the clearUnusedBits calls into the two different initialization paths for APInt from a uint64_t. This allows the compiler to better optimize the clearing of the unused bits for the single word case. And it puts the clearing for the multi word case into the initSlowCase function to save code. In the common case of initializing with 0 this allows the clearing to be completely optimized out for the single word case.
On my local x86 build this is showing a ~45kb reduction in the size of the opt binary.
Reviewers: RKSimon, hans, majnemer, davide, MatzeB
Reviewed By: hans
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D30486
llvm-svn: 296677
Windows does not treat `~` as a reference to home directory, so the call
to `llvm::sys::path::native` on, say, `~/somedir` produces `~\somedir`,
which has different meaning than the original path. With this change
tilde is expanded on Windows to user profile directory. Such behavior
keeps original meaning of the path and is consistent with the algorithm
of `llvm::sys::path::home_directory`.
Differential Revision: https://reviews.llvm.org/D27527
llvm-svn: 296590
Requesting DWARF v5 will now get you the new compile-unit and
type-unit headers. llvm-dwarfdump will also recognize them.
Differential Revision: http://reviews.llvm.org/D30206
llvm-svn: 296514
Summary:
This will allow future patches to inspect the details of the LLT. The implementation is now split between
the Support and CodeGen libraries to allow TableGen to use this class without introducing layering concerns.
Thanks to Ahmed Bougacha for finding a reasonable way to avoid the layering issue and providing the version of this patch without that problem.
Reviewers: t.p.northover, qcolombet, rovka, aditya_nandakumar, ab, javed.absar
Subscribers: arsenm, nhaehnle, mgorny, dberris, llvm-commits, kristof.beyls
Differential Revision: https://reviews.llvm.org/D30046
llvm-svn: 296474
This is also useful in cases when llvm is in a shared library. First we dlopen
the llvm shared library and then we register it as a permanent library in order
to keep the JIT and other services working.
Patch reviewed by Vedant Kumar (D29955)!
llvm-svn: 296442
The current pattern for extract bits in range is typically:
Mask.lshr(BitOffset).trunc(SubSizeInBits);
Which can be particularly slow for large APInts (MaskSizeInBits > 64) as they require the allocation of memory for the temporary variable.
This is another of the compile time issues identified in PR32037 (see also D30265).
This patch adds the APInt::extractBits() helper method which avoids the temporary memory allocation.
Differential Revision: https://reviews.llvm.org/D30336
llvm-svn: 296272
The current pattern for extract bits in range is typically:
Mask.lshr(BitOffset).trunc(SubSizeInBits);
Which can be particularly slow for large APInts (MaskSizeInBits > 64) as they require the allocation of memory for the temporary variable.
This is another of the compile time issues identified in PR32037 (see also D30265).
This patch adds the APInt::extractBits() helper method which avoids the temporary memory allocation.
Differential Revision: https://reviews.llvm.org/D30336
llvm-svn: 296147
The current pattern for extract bits in range is typically:
Mask.lshr(BitOffset).trunc(SubSizeInBits);
Which can be particularly slow for large APInts (MaskSizeInBits > 64) as they require the allocation of memory for the temporary variable.
This is another of the compile time issues identified in PR32037 (see also D30265).
This patch adds the APInt::extractBits() helper method which avoids the temporary memory allocation.
Differential Revision: https://reviews.llvm.org/D30336
llvm-svn: 296141
The current pattern for setting bits in range is typically:
Mask |= APInt::getBitsSet(MaskSizeInBits, LoPos, HiPos);
Which can be particularly slow for large APInts (MaskSizeInBits > 64) as they require the allocation memory for the temporary variable.
This is one of the key compile time issues identified in PR32037.
This patch adds the APInt::setBits() helper method which avoids the temporary memory allocation completely, this first implementation uses setBit() internally instead but already significantly reduces the regression in PR32037 (~10% drop). Additional optimization may be possible.
I investigated whether there is need for APInt::clearBits() and APInt::flipBits() equivalents but haven't seen these patterns to be particularly common, but reusing the code would be trivial.
Differential Revision: https://reviews.llvm.org/D30265
llvm-svn: 296102
The function for distinguishing local and remote files added in r295768
unconditionally uses linux/magic.h header to provide necessary
filesystem magic numbers. However, in kernel headers predating 2.6.18
the magic numbers are spread throughout multiple include files.
Furthermore, LLVM did not require kernel headers being installed so far.
To increase the portability across different versions of Linux kernel
and different Linux systems, add CMake header checks for linux/magic.h
and -- if it is missing -- the linux/nfs_fs.h and linux/smb.h headers
which contained the numbers previously.
Furthermore, since the numbers are static and the feature does not seem
critical enough to make LLVM require kernel headers at all, add fallback
constants for the case when none of the necessary headers is available.
Differential Revision: https://reviews.llvm.org/D30261
llvm-svn: 295854
Since I'm only seeing failures on OSX, and it's saying
permission denied, I'm suspecting this is due to the addition
of the MAP_RESILIENT_CODESIGN and/or MAP_RESILIENT_MEDIA flags.
Speculatively trying to remove those to get the bots working.
llvm-svn: 295770
There are still over 3400 files remaining with this property set, but there are tens of thousands more with the property not set. Until we decide what to do on a global scale, this at least unblocks me temporarily.
llvm-svn: 295756
Summary:
We have support for bisection, and bugpoint can reduce testcases
often to a single pass. But that doesn't help reduce it to a single
transform by a single pass. Which debug counting lets us do.
Debug counting lets you instrument a pass so that it only executes a
certain thing (rwhatever you want) after skipping it a certain time of
times, and then only does a certain number of executions before saying
"skip" again.
To make it concrete, for predicateinfo, if i instrument use renaming,
i can make it so it skips renaming the first N uses, renames the next
N, and then skips the rest.
This lets you narrow down a miscompilation to, often, a single
transformation, and then also debug it (by using the same command line
parameters).
Reviewers: chandlerc, davide, mehdi_amini
Subscribers: mgorny, llvm-commits
Differential Revision: https://reviews.llvm.org/D29998
llvm-svn: 295593
This set of patches adds support for Cavium ThunderX ARM64 processors:
* ThunderX
* ThunderX T81
* ThunderX T83
* ThunderX T88
Patch by Stefan Teleman
Differential Revision: https://reviews.llvm.org/D28891
llvm-svn: 295475
TimerGroup was showing up on a leak in valigrind, and
used some pretty complex code to implement a singleton.
This patch replaces the implementation with a vastly simpler
one.
Differential Revision: https://reviews.llvm.org/D28367
llvm-svn: 295370
LLVM defines `PTHREAD_LIB` which is used by AddLLVM.cmake and various projects
to correctly link the threading library when needed. Unfortunately
`PTHREAD_LIB` is defined by LLVM's `config-ix.cmake` file which isn't installed
and therefore can't be used when configuring out-of-tree builds. This causes
such builds to fail since `pthread` isn't being correctly linked.
This patch attempts to fix that problem by renaming and exporting
`LLVM_PTHREAD_LIB` as part of`LLVMConfig.cmake`. I renamed `PTHREAD_LIB`
because It seemed likely to cause collisions with downstream users of
`LLVMConfig.cmake`.
llvm-svn: 294690
Gcc supports target armv7ve which is armv7-a with virtualization
extensions. This change adds support for this in llvm for gcc
compatibility.
Also remove redundant FeatureHWDiv, FeatureHWDivARM for a few models as
this is specified automatically by FeatureVirtualization.
Patch by Manoj Gupta.
Differential Revision: https://reviews.llvm.org/D29472
llvm-svn: 294661
We only implemented it for one of the 3 HLE instructions and that instruction is also under the RTM flag. Clang only implements the RTM flag from its command line.
llvm-svn: 294562
This patch does the following.
1. Adds an Intrinsic int_x86_clzero which works with __builtin_ia32_clzero
2. Identifies clzero feature using cpuid info. (Function:8000_0008, Checks if EBX[0]=1)
3. Adds the clzero feature under znver1 architecture.
4. The custom inserter is added in Lowering.
5. A testcase is added to check the intrinsic.
6. The clzero instruction is added to assembler test.
Patch by Ganesh Gopalasubramanian with a couple formatting tweaks, a disassembler test, and using update_llc_test.py from me.
Differential revision: https://reviews.llvm.org/D29385
llvm-svn: 294558
Summary:
The formatter has three knobs:
- the user can choose which time unit to use for formatting (default: whatever is the unit of the input)
- he can choose whether the unit gets displayed (default: yes)
- he can affect the way the number itself is formatted via standard number formatting options (default:default)
Reviewers: zturner, inglorion
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D29481
llvm-svn: 294326
Summary:
Make this interface reusable similarly to std::call_once and std::once_flag interface.
This makes porting LLDB to NetBSD easier as there was in the original approach a portable way to specify a non-static once_flag. With this change translating std::once_flag to llvm::once_flag is mechanical.
Sponsored by <The NetBSD Foundation>
Reviewers: mehdi_amini, labath, joerg
Reviewed By: mehdi_amini
Subscribers: emaste, clayborg
Differential Revision: https://reviews.llvm.org/D29566
llvm-svn: 294143
Summary: As per title. I ran into that limitation of the API doing some other work, so I though that'd be a nice addition.
Reviewers: jroelofs, compnerd, majnemer
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D29503
llvm-svn: 294063
Committing after fixing suggested changes and tested release/debug builds on
x86_64-linux and arm/aarch64 builds.
Differential revision: https://reviews.llvm.org/D29042
llvm-svn: 293850
We had various variants of defining dump() functions in LLVM. Normalize
them (this should just consistently implement the things discussed in
http://lists.llvm.org/pipermail/cfe-dev/2014-January/034323.html
For reference:
- Public headers should just declare the dump() method but not use
LLVM_DUMP_METHOD or #if !defined(NDEBUG) || defined(LLVM_ENABLE_DUMP)
- The definition of a dump method should look like this:
#if !defined(NDEBUG) || defined(LLVM_ENABLE_DUMP)
LLVM_DUMP_METHOD void MyClass::dump() {
// print stuff to dbgs()...
}
#endif
llvm-svn: 293359
Summary: This is an attempt to reduce the verbose manual dispatching code in APFloat. This doesn't handle multiple dispatch on single discriminator (e.g. APFloat::add(const APFloat&)), nor handles multiple dispatch on multiple discriminators (e.g. APFloat::convert()).
Reviewers: hfinkel, echristo, jlebar
Subscribers: mehdi_amini, llvm-commits
Differential Revision: https://reviews.llvm.org/D29161
llvm-svn: 293255
Summary:
Use the O_CLOEXEC flag only when it is available. Some old systems (e.g.
SLES10) do not support this flag. POSIX explicitly guarantees that this
flag can be checked for using #if, so there is no need for a CMake
check.
In case O_CLOEXEC is not supported, fall back to fcntl(FD_CLOEXEC)
instead.
Reviewers: rnk, rafael, mgorny
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D28894
llvm-svn: 292912
Summary:
This adds a cross-platform way of setting the current working directory
analogous to the existing current_path() function used for retrieving
it. The function will be used in lldb.
Reviewers: rafael, silvas, zturner
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D29035
llvm-svn: 292907
Summary:
There's a comment in XorSlowCase that says "0^0==1" which isn't true. 0 xored with 0 is still 0. So I don't think we need to clear any unused bits here.
Now there is no difference between XorSlowCase and AndSlowCase/OrSlowCase other than the operation being performed
Reviewers: majnemer, MatzeB, chandlerc, bkramer
Reviewed By: MatzeB
Subscribers: chfast, llvm-commits
Differential Revision: https://reviews.llvm.org/D28986
llvm-svn: 292873
Summary:
This patch changes the layout of DoubleAPFloat, and adjust all
operations to do either:
1) (IEEEdouble, IEEEdouble) -> (uint64_t, uint64_t) -> PPCDoubleDoubleImpl,
then run the old algorithm.
2) Do the right thing directly.
1) includes multiply, divide, remainder, mod, fusedMultiplyAdd, roundToIntegral,
convertFromString, next, convertToInteger, convertFromAPInt,
convertFromSignExtendedInteger, convertFromZeroExtendedInteger,
convertToHexString, toString, getExactInverse.
2) includes makeZero, makeLargest, makeSmallest, makeSmallestNormalized,
compare, bitwiseIsEqual, bitcastToAPInt, isDenormal, isSmallest,
isLargest, isInteger, ilogb, scalbn, frexp, hash_value, Profile.
I could split this into two patches, e.g. use
1) for all operatoins first, then incrementally change some of them to
2). I didn't do that, because 1) involves code that converts data between
PPCDoubleDoubleImpl and (IEEEdouble, IEEEdouble) back and forth, and may
pessimize the compiler. Instead, I find easy functions and use
approach 2) for them directly.
Next step is to implement move multiply and divide from 1) to 2). I don't
have plans for other functions in 1).
Differential Revision: https://reviews.llvm.org/D27872
llvm-svn: 292839
Summary:
This makes the file descriptors on unix platform non-inheritable (O_CLOEXEC).
There is no change in behavior on windows, as the handles were already
non-inheritable there.
Reviewers: rnk, rafael
Subscribers: llvm-commits, mgorny
Differential Revision: https://reviews.llvm.org/D28854
llvm-svn: 292401
Enable an ELFObjectFile to read the its arm build attributes to
produce a target triple with a specific ARM architecture.
llvm-objdump now uses this functionality to automatically produce
a more accurate target.
Differential Revision: https://reviews.llvm.org/D28769
llvm-svn: 292366
No any changes, will follow up with D28807 commit containing APLi change for clang
to fix build issues happened.
Original commit message:
[Support/Compression] - Change zlib API to return Error instead of custom status.
Previously API returned custom enum values.
Patch changes it to return Error with string description.
That should help users to report errors in universal way.
Differential revision: https://reviews.llvm.org/D28684
llvm-svn: 292226
Previously API returned custom enum values.
Patch changes it to return Error with string description.
That should help users to report errors in universal way.
Differential revision: https://reviews.llvm.org/D28684
llvm-svn: 292214
Summary:
Revert [ARM] Fix ubig32_t read in ARMAttributeParser
Now using support functions to read data instead of trying to
perform casts.
===========================================================
Revert [ARM] Enable objdump to construct triple for ARM
Now that The ARMAttributeParser has been moved into the library,
it has been modified so that it can parse the attributes without
printing them and stores them in a map. ELFObjectFile now queries
the attributes to fill out the architecture details of a provided
triple for 'arm' and 'thumb' targets. llvm-objdump uses this new
functionality.
Subscribers: llvm-commits, samparker, aemerson, mgorny
Differential Revision: https://reviews.llvm.org/D28683
llvm-svn: 291911
Now that The ARMAttributeParser has been moved into the library,
it has been modified so that it can parse the attributes without
printing them and stores them in a map. ELFObjectFile now queries
the attributes to fill out the architecture details of a provided
triple for 'arm' and 'thumb' targets. llvm-objdump uses this new
functionality.
Differential Revision: https://reviews.llvm.org/D28281
llvm-svn: 291898
Summary:
This patch enables the following
1. AMD family 17h architecture using "znver1" tune flag (-march, -mcpu).
2. ISAs that are enabled for "znver1" architecture.
3. Checks ADX isa from cpuid to identify "znver1" flag when -march=native is used.
4. ISAs FMA4, XOP are disabled as they are dropped from amdfam17.
5. For the time being, it uses the btver2 scheduler model.
6. Test file is updated to check this flag.
This item is linked to clang review item https://reviews.llvm.org/D28018
Patch by Ganesh Gopalasubramanian
Reviewers: RKSimon, craig.topper
Subscribers: vprasad, RKSimon, ashutosh.nema, llvm-commits
Differential Revision: https://reviews.llvm.org/D28017
llvm-svn: 291543
If we split a filename into `Name` and `Prefix`, `Prefix` is at most
145 bytes. We had a bug that didn't split a path correctly. This bug
was pointed out by Rafael in the post commit review.
This patch adds a unit test for TarWriter to verify the fix.
llvm-svn: 291494
When writing to a non regular file we cannot rename to it. Since we
have to write, we may as well create a temporary file to avoid trying
to create an unique file in /dev when trying to write to /dev/null.
llvm-svn: 291485
Most (maybe all?) tar commands can handle tar archives with blank
version fields, but POSIX requires "00" to be set to the field, so
doing it is good for compliance.
llvm-svn: 291479
Tar's Ustar header has the "prefix" field to store a directory
part of a filename. It is not as flexible as the PAX-extended
filename because there's still a limitation on the maximum filename
size, but it mitigates the situation.
This patch should unbreak some Windows buildbots that uses very
old tar command.
llvm-svn: 291340
This usage of strcpy and snprintf was certainly safe, but using them
sets off various deprecation and lint warnings. Easier to just write the
belt and suspenders version.
llvm-svn: 291256
We use PAX headers to store long filenames (>= 100 bytes).
It is not needed to emit PAX headers if filenames fit in the
Ustar header. This patch implements that optimization.
llvm-svn: 291215
In LLD, we create cpio archive files for --reproduce command.
cpio was not a bad choice because it is very easy to create, but
it was sometimes hard to use because people are not familiar with
cpio command.
I noticed that creating a tar archive isn't as hard as I thought.
So I implemented it in this patch.
Differential Revision: https://reviews.llvm.org/D28091
llvm-svn: 291209
This reverts commit 63165f6ae3bac1623be36d4b3ce63afa1d51a30a.
After making this change, I discovered that _Unwind_Backtrace is
unable to unwind past a signal handler after an assertion failure.
I filed a bug report about that issue in rdar://29866587 but even if
we get a fix soon, it will be awhile before it get released.
llvm-svn: 291207
Summary:
Intel's i5-6300U CPU is reporting to have a model id of 78 (4e).
The Host detection assumes that to be Skylake Xeon (with AVX512 support),
instead of a normal Skylake machine.
Patch by: Valentin Churavy
Reviewers: nalimilan, craig.topper
Subscribers: hfinkel, tkelman, craig.topper, nalimilan, llvm-commits
Differential Revision: https://reviews.llvm.org/D28221
llvm-svn: 291084
This CPU type was not previously recognized by LLVM which led to emitting
poor (and sometimes incorrect) code in some JIT workloads on such a machine.
llvm-svn: 290961
Provide a distinct contents for semBogus and semPPCDoubleDouble in order
to prevent compilers from collapsing them to a single memory address,
while we heavily rely on every semantic having distinct address.
This happens if insecure optimization collapsing identical values is
enabled. As a result, APFloats of semBogus are indistinguishable from
semPPCDoubleDouble -- and whenever the move constructor is used, the old
value beings being incorrectly recognized as a semPPCDoubleDouble.
Since the values in semPPCDoubleDouble are not used anywhere,
we can easily solve this issue via altering the value of one of the
fields and therefore ensuring that the collapse can not occur.
Differential Revision: https://reviews.llvm.org/D28112
llvm-svn: 290896
This was originally motivated by a compile time problem I've since figured out how to solve differently, but the cleanup seemed useful. We had the same logic - which essentially implemented find - in several places. By commoning them out, I can implement find and allow erase to be inlined at the call sites if profitable.
Differential Revision: https://reviews.llvm.org/D28183
llvm-svn: 290779
Summary:
This class is unnecessary.
Its comment indicated that it was a compile error to allocate an
instance of a class that inherits from RefCountedBaseVPTR on the stack.
This may have been true at one point, but it's not today.
Moreover you really do not want to allocate *any* refcounted object on
the stack, vptrs or not, so if we did have a way to prevent these
objects from being stack-allocated, we'd want to apply it to regular
RefCountedBase too, obviating the need for a separate RefCountedBaseVPTR
class.
It seems that the main way RefCountedBaseVPTR provides safety is by
making its subclass's destructor virtual. This may have been helpful at
one point, but these days clang will emit an error if you define a class
with virtual functions that inherits from RefCountedBase but doesn't
have a virtual destructor.
Reviewers: compnerd, dblaikie
Subscribers: cfe-commits, klimek, llvm-commits, mgorny
Differential Revision: https://reviews.llvm.org/D28162
llvm-svn: 290717
GlobPattern is a class to handle glob pattern matching. Currently
only LLD is using that, but technically that feature is not specific
to linkers, so in this patch I move that file to LLVM.
Differential Revision: https://reviews.llvm.org/D27969
llvm-svn: 290212
This patch fixes the linkage for __crashtracer_info__, making it have the proper mangling (extern "C") and linkage (private extern).
It also adds a new PrettyStackTrace type, allowing LLDB to adopt this instead of Host::SetCrashDescriptionWithFormat().
Without this patch, CrashTracer on macOS won't pick up pretty stack traces from any LLVM client.
An LLDB commit adopting this API will follow shortly.
Differential Revision: https://reviews.llvm.org/D27683
llvm-svn: 289689
At least the plugin used by the LibreOffice build
(<https://wiki.documentfoundation.org/Development/Clang_plugins>) indirectly
uses those members (through inline functions in LLVM/Clang include files in turn
using them), but they are not exported by utils/extract_symbols.py on Windows,
and accessing data across DLL/EXE boundaries on Windows is generally
problematic.
Differential Revision: https://reviews.llvm.org/D26671
llvm-svn: 289647
Summary:
The motivation is to support better the -object_path_lto option on
Darwin. The linker needs to write down the generate object files on
disk for later use by lldb or dsymutil (debug info are not present
in the final binary). We're moving this into libLTO so that we can
be smarter when a cache is enabled and hard-link when possible
instead of duplicating the files.
Reviewers: tejohnson, deadalnix, pcc
Subscribers: dexonsmith, llvm-commits
Differential Revision: https://reviews.llvm.org/D27507
llvm-svn: 289631
Bots are broken and needs to be fixed before having this on by default.
The feature was committed in r289619.
I tried to disable it in r289624 and failed because it was initialized in two places.
llvm-svn: 289626
Summary:
Given a flag (-mllvm -reverse-iterate) this patch will enable iteration of SmallPtrSet in reverse order.
The idea is to compile the same source with and without this flag and expect the code to not change.
If there is a difference in codegen then it would mean that the codegen is sensitive to the iteration order of SmallPtrSet.
This is enabled only with LLVM_ENABLE_ABI_BREAKING_CHECKS.
Reviewers: chandlerc, dexonsmith, mehdi_amini
Subscribers: mgorny, emaste, llvm-commits
Differential Revision: https://reviews.llvm.org/D26718
llvm-svn: 289619
Summary:
I looked at libgcc's implementation (which is based on the paper,
Software for Doubled-Precision Floating-Point Computations", by Seppo Linnainmaa,
ACM TOMS vol 7 no 3, September 1981, pages 272-283.) and made it generic to
arbitrary IEEE floats.
Differential Revision: https://reviews.llvm.org/D26817
llvm-svn: 289472
iteration.
Instead, load the byte at the needle length, compare it directly, and
save it to use in the lookup table of lengths we can skip forward.
I also added an annotation to expect that the comparison fails so that
the loop gets laid out contiguously without the call to memcpy (and the
substantial register shuffling that the ABI requires of that call).
Finally, because this behaves especially badly with a needle length of
one (by calling memcmp with a zero length) special case that to directly
call memchr, which is what we should have been doing anyways.
This was motivated by the fact that there are a large number of test
cases in 'check-llvm' where FileCheck's performance is dominated by
calls to StringRef::find (in a release, no-asserts build). I'm working
on patches to generally improve matters there, but this alone was worth
a 12.5% improvement in one test case where FileCheck spent 92% of its
time in this routine.
I experimented a bunch with different minor variations on this theme,
for example setting the pointer *at* the last byte and indexing
backwards for the call to memcmp. That didn't improve anything on this
version and seemed more complex. I also tried other things to make the
loop flow more nicely and none worked. =/ It is a bit unfortunate, the
generated code here remains pretty gross, but I don't see any obvious
ways to improve it. At this point, most of my ideas would be really
elaborate:
1) While the remainder of the string is long enough, we could load
a 16-byte or 32-byte vector at the address of the last byte and use
palignr to rotate that and check the first 15- or 31-bytes at the
front of the next segment, essentially pre-loading the first several
bytes of the next iteration so we could quickly detect a mismatch in
those bytes without an additional memory access. Down side would be
the code complexity, having a fallback loop, and likely misaligned
vector load. Plus it would make the common case of the last byte not
matching somewhat slower (need some extraction from a vector).
2) While we have space, we could do an aligned load of a 16- or 32-byte
vector that *contains* the end byte, and use any peceding bytes to
have a more precise "no" test, and any subsequent bytes could be
saved for the next iteration. This remove any unaligned load penalty,
but still requires us to pay the overhead of vector extraction for
the cases where we didn't need to do anything other than load and
compare the last byte.
3) Try to walk from the last byte in a way that is more friendly to
cache and/or memory pre-fetcher considering we have to poke the last
byte anyways.
No idea if any of these are really worth pursuing though. They all seem
somewhat unlikely to yield big wins in practice and to be a lot of work
and complexity. So I settled here, which at least seems like a strict
improvement over the previous version.
llvm-svn: 289373
so we can stop using DW_OP_bit_piece with the wrong semantics.
The entire back story can be found here:
http://lists.llvm.org/pipermail/llvm-commits/Week-of-Mon-20161114/405934.html
The gist is that in LLVM we've been misinterpreting DW_OP_bit_piece's
offset field to mean the offset into the source variable rather than
the offset into the location at the top the DWARF expression stack. In
order to be able to fix this in a subsequent patch, this patch
introduces a dedicated DW_OP_LLVM_fragment operation with the
semantics that we used to apply to DW_OP_bit_piece, which is what we
actually need while inside of LLVM. This patch is complete with a
bitcode upgrade for expressions using the old format. It does not yet
fix the DWARF backend to use DW_OP_bit_piece correctly.
Implementation note: We discussed several options for implementing
this, including reserving a dedicated field in DIExpression for the
fragment size and offset, but using an custom operator at the end of
the expression works just fine and is more efficient because we then
only pay for it when we need it.
Differential Revision: https://reviews.llvm.org/D27361
rdar://problem/29335809
llvm-svn: 288683
Summary:
This is a follow up to r288303, where I have introduced TrigramIndex
to speed up SpecialCaseList for the cases when all rules are
simple wildcards, like *hello*wor.d*.
Here, I add support for escaping, so that it's possible to
specify rules like *c\+\+abi*.
Reviewers: pcc
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D27318
llvm-svn: 288553
Summary:
it's often the case when the rules in the SpecialCaseList
are of the form hel.o*bar. That gives us a chance to build
trigram index to quickly discard 99% of inputs without
running a full regex. A similar idea was used in Google Code Search
as described in the blog post:
https://swtch.com/~rsc/regexp/regexp4.html
The check is defeated, if there's at least one regex
more complicated than that. In this case, all inputs
will go through the regex. That said, the real-world
rules are often simple or can be simplied. That considerably
speeds up compiling Chromium with CFI and UBSan.
As measured on Chromium's content_message_generator.cc:
before, CFI: 44 s
after, CFI: 23 s
after, CFI, no blacklist: 23 s (~1% slower, but 3 runs were unable to show the difference)
after, regular compilation to bitcode: 23 s
Reviewers: pcc
Subscribers: mgorny, llvm-commits
Differential Revision: https://reviews.llvm.org/D27188
llvm-svn: 288303
This is the first part of an effort to add wasm binary
support across all llvm tools.
Patch by Sam Clegg
Differential Revision: https://reviews.llvm.org/D26172
llvm-svn: 288251
Summary:
The usage was previously guarded by HAVE_DLFCN. This breaks on Android with
LLVM_BUILD_STATIC as the platform does not provide a static version of libdl.
Using HAVE_DLOPEN fixes it as the code will only get used if we are actually able
to link an executable using dlopen.
Reviewers: rafael, beanz
Subscribers: tberghammer, danalbert, llvm-commits
Differential Revision: https://reviews.llvm.org/D26504
llvm-svn: 288246
The macro LLVM_ENABLE_ABI_BREAKING_CHECKS is moved to a new header
abi-breaking.h, from llvm-config.h. Only headers that are using the
macro are including this new header.
LLVM will define a symbol, either EnableABIBreakingChecks or
DisableABIBreakingChecks depending on the configuration setting for
LLVM_ABI_BREAKING_CHECKS.
The abi-breaking.h header will add weak references to these symbols in
every clients that includes this header. This should ensure that
a mismatch triggers a link failure (or a load time failure for DSO).
On MSVC, the pragma "detect_mismatch" is used instead.
Differential Revision: https://reviews.llvm.org/D26876
llvm-svn: 288082
Some scanner errors were not checked and reported by the parser.
Fix PR30934. Recommit r288014 after fixing unittest.
Patch by: Serge Guelton <serge.guelton@telecom-bretagne.eu>
Differential Revision: https://reviews.llvm.org/D26419
llvm-svn: 288071
Some scanner errors were not checked and reported by the parser.
Fix PR30934
Patch by: Serge Guelton <serge.guelton@telecom-bretagne.eu>
Differential Revision: https://reviews.llvm.org/D26419
llvm-svn: 288014
This reverts commit r287684
Objections on the review thread had not been addressed to
prior to commit. I asked the committer to revert, but i expect they
are gone for the US holiday or something.
llvm-svn: 287798
In many sitautions, you just want to compute a hash for one chunk
of data. This patch adds convenient functions for that purpose.
Differential Revision: https://reviews.llvm.org/D26988
llvm-svn: 287726
If a response file in construct `@file` was specified by relative name,
constructs `@file` nested within it were resolved incorrectly if the
flag RelativeNames in call to ExpandResponseFile was set to true.
This feature is used in configuration files, tests for it are in
respective change (see D24933).
llvm-svn: 287482
The previously used "names" are rather descriptions (they use multiple
words and contain spaces), use short programming language identifier
like strings for the "names" which should be used when exporting to
machine parseable formats.
Also removed a unused TimerGroup from Hexxagon.
Differential Revision: https://reviews.llvm.org/D25583
llvm-svn: 287369
Summary:
LLVM will define a symbol, either EnableABIBreakingChecks or
DisableABIBreakingChecks depending on the configuration setting for
LLVM_ABI_BREAKING_CHECKS.
The llvm-config.h header will add weak references to these symbols in
every clients that includes this header. This should ensure that
a mismatch triggers a link failure (or a load time failure for DSO).
On MSVC, the pragma "detect_mismatch" is used instead.
Reviewers: rnk, jroelofs
Subscribers: llvm-commits, mgorny
Differential Revision: https://reviews.llvm.org/D26841
llvm-svn: 287352
Summary:
All uses have been replaced by appropriate std::chrono types, and the class is
now unused.
Reviewers: zturner, mehdi_amini
Subscribers: llvm-commits, mgorny
Differential Revision: https://reviews.llvm.org/D26447
llvm-svn: 287094
This patch makes it possible to identify object files created by CL.exe
with /GL option. Such file contains Microsoft proprietary intermediate
code instead of target machine code to do LTO.
I need this to print out user-friendly error message from LLD.
Differential Revision: https://reviews.llvm.org/D26645
llvm-svn: 286919
Darwin's backtrace() function does not work with sigaltstack (which was
enabled when available with r270395) — it does a sanity check to make
sure that the current frame pointer is within the expected stack area
(which it is not when using an alternate stack) and gives up otherwise.
The alternative of _Unwind_Backtrace seems to work fine on macOS, so use
that when backtrace() fails. Note that we then use backtrace_symbols_fd()
with the addresses from _Unwind_Backtrace, but I’ve tested that and it
also seems to work fine. rdar://problem/28646552
llvm-svn: 286851
This introduces a new type-safe general purpose formatting
library. It provides compile-time type safety, does not require
a format specifier (since the type is deduced), and provides
mechanisms for extending the format capability to user defined
types, and overriding the formatting behavior for existing types.
This patch additionally adds documentation for the API to the
LLVM programmer's manual.
Mailing List Thread:
http://lists.llvm.org/pipermail/llvm-dev/2016-October/105836.html
Differential Revision: https://reviews.llvm.org/D25587
llvm-svn: 286682
The NamedRegionTimer initializer without a group name puts the Timer
into the "Misc" group and is (nearly) unused. Remove it.
The only user of this constructor appears to be the HexagonGenInsert pass,
which creates a counter without group to count the complete execution
time of that pass, however since every pass gets a counter by the
PassManager anyway this should be unnecessary. Also removed the
pointless TimerGroup there.
Differential Revision: https://reviews.llvm.org/D25582
llvm-svn: 286524
This makes it possible to indent a binary blob by a certain
number of bytes, and also makes some things more idiomatic.
Finally, it integrates this binary blob formatter into ScopedPrinter
which used to have its own implementation of this algorithm.
Differential Revision: https://reviews.llvm.org/D26477
llvm-svn: 286495
Summary:
Fixes PR30869.
In D25977 I meant to change all functions that care about lifetime. I
changed constructors, factory functions, but I missed member/free
functions that return new instances. This patch changes them.
Reviewers: hfinkel, kbarton, echristo, joerg
Subscribers: llvm-commits, mehdi_amini
Differential Revision: https://reviews.llvm.org/D26269
llvm-svn: 286060
If a response file included by construct @file itself includes a response file
and that file is specified by relative file name, current behavior is to resolve
the name relative to the current working directory. The change adds additional
flag to ExpandResponseFiles that may be used to resolve nested response file
names relative to including file. With the new mode a set of related response
files may be kept together and reference each other with short position
independent names.
Differential Revision: https://reviews.llvm.org/D24917
llvm-svn: 285675
This resubmits r284436 and r284437, which were reverted in
r284462 as they were breaking the AArch64 buildbot.
The breakage on AArch64 turned out to be a miscompile which is
still not fixed, but is actively tracked at llvm.org/pr30748.
This resubmission re-writes the code in a way so as to make the
miscompile not happen.
llvm-svn: 285483
Summary:
This patch adds DoubleAPFloat mode to APFloat.
Now, an APFloat with semantics PPCDoubleDouble will have DoubleAPFloat layout
(APFloat.U.Double), which contains two underlying APFloats as
PPCDoubleDoubleImpl and IEEEdouble semantics. Currently the IEEEdouble APFloat
is not used, and the first APFloat behaves exactly the same before this change.
This patch consists of three kinds of logics:
1) Construction and destruction of APFloat. Now the ctors, dtor, assign
opertors and factory functions construct different underlying layout
based on the semantics passed in.
2) s/IEEE/getIEEE()/ for normal, lifetime-unrelated computation functions.
These functions only access Floats[0] in DoubleAPFloat, which is the
same as today's semantic.
3) A "Double dispatch" function, APFloat::convert. Converting between two
different layouts requires appropriate logic.
Neither of these change the external behavior.
Reviewers: hfinkel, kbarton, echristo, iteratee
Subscribers: mehdi_amini, llvm-commits
Differential Revision: https://reviews.llvm.org/D25977
llvm-svn: 285351
* Assume that clang passes non-zero alignment value to DIBuilder
only in case when it was forced by C++11 'alignas', C11 '_Alignas'
or compiler attribute '__attribute__((aligned (N)))'.
* Emit DW_AT_alignment if alignment is specified for type/object.
Differential Revision: https://reviews.llvm.org/D24425
llvm-svn: 285189
* Assume that clang passes non-zero alignment value to DIBuilder
only in case when it was forced by C++11 'alignas', C11 '_Alignas'
or compiler attribute '__attribute__((aligned (N)))'.
* Emit DW_AT_alignment if alignment is specified for type/object.
Differential Revision: https://reviews.llvm.org/D24425
llvm-svn: 285181
Summary:
The intention is to make APFloat an interface class, so that later I can add a second implementation class DoubleAPFloat to correctly implement PPCDoubleDouble semantic. The interface of IEEEFloat is not public, and can be simplified (currently it's exactly the same as the old APFloat), but that belongs to a separate patch.
DoubleAPFloat should look like:
class DoubleAPFloat {
const fltSemantics *Semantics;
std::unique_ptr<APFloat> APFloats; // Two heap-allocated APFloats.
};
There is no functional change, nor public interface change.
Reviewers: hfinkel, chandlerc, iteratee, echristo, kbarton
Subscribers: llvm-commits, mehdi_amini
Differential Revision: https://reviews.llvm.org/D25536
llvm-svn: 285105
If we don't have futimens(), we fall back to futimes(), which only supports
microsecond timestamps. In that case, we need to explicitly cast away the extra
precision in setLastModificationAndAccessTime().
llvm-svn: 284977
Summary:
This is a follow-up to D25416. It removes all usages of TimeValue from
llvm/Support library (except for the actual TimeValue declaration), and replaces
them with appropriate usages of std::chrono. To facilitate this, I have added
small utility functions for converting time points and durations into appropriate
OS-specific types (FILETIME, struct timespec, ...).
Reviewers: zturner, mehdi_amini
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D25730
llvm-svn: 284966
All of these existed because MSVC 2013 was unable to synthesize default
move ctors. We recently dropped support for it so all that error-prone
boilerplate can go.
No functionality change intended.
llvm-svn: 284721
This is a resubmission of r284590. The mingw build should be fixed now. The
problem was we were matching time_t with _localtime_64s, which was incorrect on
_USE_32BIT_TIME_T systems. Instead I use localtime_s, which should always
evaluate to the correct function.
llvm-svn: 284720
This reverts commit r284590 as it fails on the mingw buildbot. I think I know the
fix, but I cannot test it right now. Will reapply when I verify it works ok.
This reverts r284590.
llvm-svn: 284615
Summary:
std::chrono mostly covers the functionality of llvm::sys::TimeValue and
lldb_private::TimeValue. This header adds a bit of utility functions and
typedefs, which make the usage of the library and porting code from TimeValues
easier.
Rationale:
- TimePoint typedef - precision of system_clock is implementation defined -
using a well-defined precision helps maintain consistency between platforms,
makes it interact better with existing TimeValue classes, and avoids cases
there a time point is implicitly convertible to a specific precision on some
platforms but not on others.
- system_clock::to_time_t only accepts time_points with the default system
precision (even though time_t has only second precision on all platforms we
support). To avoid the need for explicit casts, I have added a toTimeT()
wrapper function. toTimePoint(time_t) was not strictly necessary, but I have
added it for symmetry.
Reviewers: zturner, mehdi_amini
Subscribers: beanz, mgorny, llvm-commits, modocache
Differential Revision: https://reviews.llvm.org/D25416
llvm-svn: 284590
This reverts commits 284436 and 284437 because they still break AArch64 bots:
Value of: format_number(-10, IntegerStyle::Integer, 1)
Actual: "-0"
Expected: "-10"
llvm-svn: 284462
This resubmits commits 284425 and r284428, which were reverted
in r284429 due to some infinite recursion caused by an incorrect
selection of function overloads. Reproduced the failure on Linux
using GCC 4.8.4, and confirmed that with the new patch the tests
path on GCC as well as MSVC. So hopefully this fixes everything.
llvm-svn: 284436
raw_ostream has not afforded a lot of flexibility in terms of
how to format numbers when outputting. Wrap this all up into
a set of low level helper functions that can be used to output
numbers with arbitrary precision, alignment, format, etc and
then update raw_ostream to use these functions.
This will be useful for upcoming improvements to llvm's string
formatting libraries, but are still useful independently.
Differential Revision: https://reviews.llvm.org/D25497
llvm-svn: 284425
Based on post-commit review for D25585/r284180, rename
hardware_physical_concurrency to heavyweight_hardware_concurrency,
to better reflect what type of tasks it should be used for and
to enable other systems to map this to something other than the
number of physical cores.
llvm-svn: 284390
/../foo is still a proper path after removing the dotdot. This should
now finally match https://9p.io/sys/doc/lexnames.html [Cleaning names].
llvm-svn: 284384
Summary:
This will be used by ThinLTO to set the amount of backend
parallelism, which performs better when restricted to the number
of physical cores (on X86 at least, where getHostNumPhysicalCores is
currently defined). If not available this falls back to
thread::hardware_concurrency.
Note I didn't add to the thread class since that is a typedef to
std::thread where available.
Reviewers: mehdi_amini
Subscribers: beanz, llvm-commits, mgorny
Differential Revision: https://reviews.llvm.org/D25585
llvm-svn: 284180
Summary:
For now I have only added support for x86_64 Linux, but other systems
can be added incrementally.
This is to be used for setting the default parallelism for ThinLTO
backends (instead of thread::hardware_concurrency which includes
hyperthreading and is too aggressive). I'll send this as a follow-on
patch, and it will fall back to hardware_concurrency when the new
getHostNumPhysicalCores returns -1 (when not supported for a given
host system).
I also added an interface to MemoryBuffer to force reading a file
as a stream - this is required for /proc/cpuinfo which is a special
file that looks like a normal file but appears to have 0 size.
The existing readers of this file in Host.cpp are reading the first
1024 or so bytes from it, because the necessary info is near the top.
But for the new functionality we need to be able to read the entire
file. I can go back and change the other readers to use the new
getFileAsStream as a follow-on patch since it seems much more robust.
Added a unittest.
Reviewers: mehdi_amini
Subscribers: beanz, mgorny, llvm-commits, modocache
Differential Revision: https://reviews.llvm.org/D25564
llvm-svn: 284138
subcommands
This commit fixes a bug where the help output doesn't display subcommands when
a tool has less than 3 subcommands.
This change doesn't include a corresponding unittest as there is no viable way
to provide a unittest for it.
Differential Revision: https://reviews.llvm.org/D25463
llvm-svn: 283998
Low level functionality to format numbers were embedded in the
implementation of raw_ostream. I have need to use these through
an interface other than the overloaded stream operators, so they
need to be raised to a level that they can be used from either
raw_ostream operators or other code.
llvm-svn: 283921
This has existed pretty much forever AFAICT, but the code was
never being exercised because nobody was using the class. A
user of this class surfaced, and now we're breaking with UB.
The code was obviously wrong, so it's fixed here.
llvm-svn: 283912
Previously we would print
USAGE: <exe> [subcommand] [options]
Even if no subcommands were present. This changes the output
format to only print "[subcommand]" if there is at least one
subcommand.
Fixes llvm.org/pr30598
Patch by Serge Guelton
llvm-svn: 283892
LLVM's RandomNumberGenerator wasn't compatible with
the random distribution from <random>.
Fixes PR25105
Patch by: Serge Guelton <serge.guelton@telecom-bretagne.eu>
Differential Revision: https://reviews.llvm.org/D25443
llvm-svn: 283854
This should allow users of the library to get a range to iterate through
all the subcommands that are registered to the global parser. This
allows users to define subcommands in libraries that self-register to
have dispatch done at a different stage (like main). It allows for
writing code like the following:
for (auto *S : cl::getRegisteredSubcommands()) {
if (*S) {
// Dispatch on S->getName().
}
}
This change also contains tests that show this usage pattern.
Reviewers: zturner, dblaikie, echristo
Subscribers: llvm-commits, mehdi_amini
Differential Revision: https://reviews.llvm.org/D24489
llvm-svn: 283296
Summary:
Attempting to fix PR30384.
Take the same approach as in compiler_rt and add a simplified version of __get_cpuid_max.
Including cpuid.h is no longer needed.
Reviewers: echristo, joerg
Subscribers: mehdi_amini, llvm-commits
Differential Revision: https://reviews.llvm.org/D24597
llvm-svn: 283265
Summary:
This lets people link against LLVM and their own version of the UTF
library.
I determined this only affects llvm, clang, lld, and lldb by running
$ git grep -wl 'UTF[0-9]\+\|\bConvertUTF\bisLegalUTF\|getNumBytesFor' | cut -f 1 -d '/' | sort | uniq
clang
lld
lldb
llvm
Tested with
ninja lldb
ninja check-clang check-llvm check-lld
(ninja check-lldb doesn't complete for me with or without this patch.)
Reviewers: rnk
Subscribers: klimek, beanz, mgorny, llvm-commits
Differential Revision: https://reviews.llvm.org/D24996
llvm-svn: 282822
Turns out several external projects relied on llvm printing statistics
on exit. Let's go back to this behaviour by default and have an optional
parameter to disable it.
llvm-svn: 282532
Previously enabling the statistics with EnableStatistics() would lead to
them getting printed to stderr/-info-output-file on exit. However
frontends may want a way to enable statistics and do the printing on
their own instead of the forced printing on exit.
This changes the code so that only the -stats option enables printing on
exit, EnableStatistics() only enables the tracking but requires invoking
one of the PrintStatistics() variants.
Differential Revision: https://reviews.llvm.org/D24819
llvm-svn: 282425
Summary:
For AMDGPU, we have been using the operating system component of the triple
for specifying the low-level runtime that is being used. The rationale for
this is that the host operating system (e.g. Linux) is irrelevant for GPU code,
since its execution enviroment will be mostly controled by the low-level runtime
being used to execute the code.
In most cases, higher level languages have their own runtime which is
implemented on top of the low-level runtime. The kernel ABIs of each
language mostly depend on the low-level runtime, but there may be some
slight differences between languages. OpenCL for example, may append
additional arguments to the kernel in order to pass values like global
offsets or buffers for printf. OpenMP, HCC, or other languages may want
to add their own values which differ from OpenCL.
The reason for adding a new opencl environment type is to make it possible for the backend
to distinguish between the ABIs of the higher-level languages and handle them correctly.
It seems cleaner to use the enviroment component for this rather than creating a new
OS type for every combination of low-level runtime / high-level language.
Reviewers: Anastasia, chandlerc
Subscribers: whchung, pekka.jaaskelainen, wdng, yaxunl, llvm-commits
Differential Revision: https://reviews.llvm.org/D24735
llvm-svn: 282218
A recent patch added support for consumeInteger() and made
getAsInteger delegate to this function. A few buildbots are
failing as a result with an assertion failure. On a hunch,
I tested what happens if I call getAsInteger() on an empty
string, and sure enough it crashes the same way that the
buildbots are crashing.
I confirmed that getAsInteger() on an empty string did not
crash before my patch, so I suspect this to be the cause.
I also added a unit test for the empty string.
llvm-svn: 282170
StringRef::getInteger() exists and treats the entire string as
an integer of the specified radix, failing if any invalid characters
are encountered or the number overflows.
Sometimes you might have something like "123456foo" and you want
to get the number 123456 and leave the string "foo" remaining.
This is similar to what would be possible by using the standard
runtime library functions strtoul et al and specifying an end
pointer.
This patch adds consumeInteger(), which does exactly that. It
consumes as much as possible until an invalid character is found,
and modifies the StringRef in place so that upon return only
the portion of the StringRef after the number remains.
Differential Revision: https://reviews.llvm.org/D24778
llvm-svn: 282164
This should allow users of the library to get a range to iterate through
all the subcommands that are registered to the global parser. This
allows users to define subcommands in libraries that self-register to
have dispatch done at a different stage (like main). It allows for
writing code like the following:
for (auto *S : cl::getRegisteredSubcommands()) {
if (*S) {
// Dispatch on S->getName().
}
}
This change also contains tests that show this usage pattern.
Reviewers: zturner, dblaikie, echristo
Subscribers: llvm-commits, mehdi_amini
Differential Revision: https://reviews.llvm.org/D24489
llvm-svn: 281290
- Add AllocatorList, a non-intrusive list that owns an LLVM-style
allocator and provides a std::list-like interface (trivially built on
top of simple_ilist),
- add a typedef (and unit tests) for BumpPtrList, and
- use BumpPtrList for the list of llvm::yaml::Token (i.e., TokenQueueT).
TokenQueueT has no need for the complexity of an intrusive list. The
only reason to inherit from ilist was to customize the allocator.
TokenQueueT was the only example in-tree of using ilist<> in a truly
non-intrusive way.
Moreover, this removes the final use of the non-intrusive
ilist_traits<>::createNode (after r280573, r281177, and r281181). I
have a WIP patch that removes this customization point (and the API that
relies on it) that I plan to commit soon.
Note: AllocatorList owns the allocator, which limits the viable API
(e.g., splicing must be on the same list). For now I've left out
any problematic API. It wouldn't be hard to split AllocatorList into
two layers: an Impl class that calls DerivedT::getAlloc (via CRTP), and
derived classes that handle Allocator ownership/reference/etc semantics;
and then implement splice with appropriate assertions; but TBH we should
probably just customize the std::list allocators at that point.
llvm-svn: 281182
SmallVectors are convenient, but they don't cover every use case.
In particular, they are fairly large (3 pointers + one element) and
there is no way to take ownership of the buffer to put it somewhere
else. This patch then adds a lower lever interface that works with
any buffer.
llvm-svn: 281082
This adds a copy of the demangler in libcxxabi.
The code also has no dependencies on anything else in LLVM. To enforce
that I added it as another library. That way a BUILD_SHARED_LIBS will
fail if anyone adds an use of StringRef for example.
The no llvm dependency combined with the fact that this has to build
on linux, OS X and Windows required a few changes to the code. In
particular:
No constexpr.
No alignas
On OS X at least this library has only one global symbol:
__ZN4llvm16itanium_demangleEPKcPcPmPi
My current plan is:
Commit something like this
Change lld to use it
Change lldb to use it as the fallback
Add a few #ifdefs so that exactly the same file can be used in
libcxxabi to export abi::__cxa_demangle.
Once the fast demangler in lldb can handle any names this
implementation can be replaced with it and we will have the one true
demangler.
llvm-svn: 280732
Crash was possible if match() method
was called on object that was moved or object
created with empty constructor.
Testcases updated.
DIfferential revision: https://reviews.llvm.org/D24123
llvm-svn: 280473
If we failed to commit the buffer but did not die to a signal, the temp
file would remain on disk on Windows. Having an open file mapping and
file handle prevents the file from being deleted. I am choosing not to
add an assertion of success on the temp file removal, since virus
scanners and other environmental things can often cause removal to fail
in real world tools.
Also fix more temp file leaks in unit tests.
llvm-svn: 280445
initializers not being in the same order as the members.
Specifically, 'preg' is the first member followed by 'error', so they
will be initialized in that order and should be written in the member
initializer list in that order.
For the constructor in question, there is no change in behavior.
llvm-svn: 280345
This is useful when need to defer the construction,
e.g. using Regex as a member of class.
Differential revision: https://reviews.llvm.org/D24101
llvm-svn: 280339
Many lists want to override only allocation semantics, or callbacks for
iplist. Split these up to prevent code duplication.
- Specialize ilist_alloc_traits to change the implementations of
deleteNode() and createNode().
- One common desire is to do nothing deleteNode() and disable
createNode(). Specialize ilist_alloc_traits to inherit from
ilist_noalloc_traits for that behaviour.
- Specialize ilist_callback_traits to use the addNodeToList(),
removeNodeFromList(), and transferNodesFromList() callbacks.
As a drive-by, add some coverage to the callback-related unit tests.
llvm-svn: 280128
This function allows getting arbitrary sized block of random bytes.
Primary motivation is support for --build-id=uuid in lld.
Differential revision: https://reviews.llvm.org/D23671
llvm-svn: 279807
This patch changes LLVM_CONSTEXPR variable declarations to const
variable declarations, since LLVM_CONSTEXPR expands to nothing if the
current compiler doesn't support constexpr. In all of the changed
cases, it looks like the code intended the variable to be const instead
of sometimes-constexpr sometimes-not.
llvm-svn: 279696
Remove all the dead code around ilist_*sentinel_traits. This is a
follow-up to gutting them as part of r279314 (originally r278974),
staged to prevent broken builds in sub-projects.
Uses were removed from clang in r279457 and lld in r279458.
llvm-svn: 279473
Xcode and MSVC list the headers and source files for each library.
LLVMSupport lists included the source files for ADT but not the headers. This
add the ADT headers so that they are browsable by the UI.
llvm-svn: 279470
This is used to mark functions with the C++11 [[ noreturn ]] or C11 _Noreturn
attributes.
Patch by Victor Leschuk!
https://reviews.llvm.org/D23167
llvm-svn: 278940
The struct LineNoCacheTy is in SourceMgr.cpp inside anonymous namespace.
This diff changes the order of fields and removes the excessive padding
(8 bytes).
Patch by Alexander Shaposhnikov!
Differential revision: https://reviews.llvm.org/D23546
llvm-svn: 278838
Share code for the (mostly problematic) embedded sentinel traits.
- Move the LLVM_NO_SANITIZE("object-size") attribute to
ilist_half_embedded_sentinel_traits and ilist_embedded_sentinel_traits
(previously it spread throughout the code duplication).
- Add an ilist_full_embedded_sentinel_traits which has no UB (but has
the downside of storing the complete node).
- Replace all the custom sentinel traits in LLVM with a declaration of
ilist_sentinel_traits that inherits from one of the embedded sentinel
traits classes.
There are still custom sentinel traits in other LLVM subprojects. I'll
remove those in a follow-up.
Nothing at all should be changing here, this is just rearranging code.
Note that the final goal here is to remove the sentinel traits
altogether, settling on the memory layout of
ilist_half_embedded_sentinel_traits without the UB. This intermediate
step moves the logic into ilist.h.
llvm-svn: 278513
Add unittest to {ARM | AArch64}TargetParser,and by the way correct problems as below:
1.Correct a incorrect indexing problem in AArch64TargetParser. The architecture enumeration
is shared across ARM and AArch64 in original implementation.But In the code,I just used the
index which was offset by the ARM, and this would index into the array incorrectly. To make
AArch64 has its own arch enum,or we will do a lot of slowly iterating.
2.Correct a spelling error. The parameter of llvm::AArch64::getArchExtName.
3.Correct a writing mistake, in llvm::ARM::parseArchISA.
Differential Revision: https://reviews.llvm.org/D21785
llvm-svn: 276957
Process::GetEnv does the right thing across our platforms.
CommandLine.cpp had, more or less, the same logic. Let's remove the
duplication.
No functional change is intended.
llvm-svn: 276572
This adds versions of operator + and - which are optimized for the LHS/RHS of the
operator being RValue's. When an RValue is available, we can use its storage space
instead of allocating new space.
On code such as ConstantRange which makes heavy use of APInt's over 64-bits in size,
this results in significant numbers of saved allocations.
Thanks to David Blaikie for all the review and most of the code here.
llvm-svn: 276470
Summary:
When giving the following command:
% llvm-cov report -instr-profile=default.profraw
llvm-cov will give the following error message:
>llvm-cov report: Not enough positional command line arguments specified!
>Must specify at least 1 positional arguments: See: orbis-llvm-cov report -help
This patch changes the error message from '1 positional arguments'
to '1 positional argument'.
Differential Revision: https://reviews.llvm.org/D22621
llvm-svn: 276404
Summary:
Mirroring most cleanup changed from compiler-rt/lib/builtins/cpu_model.
x86 methods are still returning a bool.
Reviewers: llvm-commits, echristo, craig.topper, sanjoy
Subscribers: mehdi_amini
Differential Revision: https://reviews.llvm.org/D22480
llvm-svn: 276149
Summary: substr doesn't modify the string, so this line has no effect.
Reviewers: majnemer
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D22540
llvm-svn: 276057
This makes sure that space is actually available. With this change
running lld on a full file system causes it to exit with
failed to open foo: No space left on device
instead of crashing with a sigbus.
llvm-svn: 276017
Summary:
The triple used for this distribution is mips64el-linux-gnuabi64.
Reviewers: sdardis
Subscribers: sdardis, llvm-commits
Differential Revision: https://reviews.llvm.org/D22406
llvm-svn: 275966
This adds Clang-specific DWARF constants for nullability and ObjC
class properties that are already generated by clang. This patch adds
dwarfdump support and a more comprehensive testcase.
<rdar://problem/27335745>
llvm-svn: 275354
See http://reviews.llvm.org/D22079
Changes the Archive::child_begin and Archive::children to require a reference
to an Error. If iterator increment fails (because the archive header is
damaged) the iterator will be set to 'end()', and the error stored in the
given Error&. The Error value should be checked by the user immediately after
the loop. E.g.:
Error Err;
for (auto &C : A->children(Err)) {
// Do something with archive child C.
}
// Check the error immediately after the loop.
if (Err)
return Err;
Failure to check the Error will result in an abort() when the Error goes out of
scope (as guaranteed by the Error class).
llvm-svn: 275316
Since these are named nvvm_* rather than nvptx_*, we also need to
update getArchTypePrefix. It's a bit unusual for getArchTypePrefix not
to match the backend name, but I think this fits the intent of the
function in this case.
llvm-svn: 274890
Summary:
Add renderscript32 and renderscript64 ArchTypes. This is to configure
the ABI requirement on 32-bit RenderScript that 'long' types have 64-bit
size and alignment. 64-bit RenderScript is the same as AArch64, but is
added here for completeness.
Reviewers: echristo, rsmith
Subscribers: aemerson, jfb, rampitec, dschuff, mehdi_amini, llvm-commits, srhines
Differential Revision: http://reviews.llvm.org/D21333
llvm-svn: 274412
This fixes an issue where occurrence counts would be unexpectedly
reset when parsing different parts of a command line multiple
times.
**ORIGINAL COMMIT MESSAGE**
This allows command line tools to use syntaxes like the following:
llvm-foo.exe command1 -o1 -o2
llvm-foo.exe command2 -p1 -p2
Where command1 and command2 contain completely different sets of
valid options. This is backwards compatible with previous uses
of llvm cl which did not support subcommands, as any option
which specifies no optional subcommand (e.g. all existing
code) goes into a special "top level" subcommand that expects
dashed options to appear immediately after the program name.
For example, code which is subcommand unaware would generate
a command line such as the following, where no subcommand
is specified:
llvm-foo.exe -q1 -q2
The top level subcommand can co-exist with actual subcommands,
as it is implemented as an actual subcommand which is searched
if no explicit subcommand is specified. So llvm-foo.exe as
specified above could be written so as to support all three
aforementioned command lines simultaneously.
There is one additional "special" subcommand called AllSubCommands,
which can be used to inject an option into every subcommand.
This is useful to support things like help, so that commands
such as:
llvm-foo.exe --help
llvm-foo.exe command1 --help
llvm-foo.exe command2 --help
All work and display the help for the selected subcommand
without having to explicitly go and write code to handle each
one separately.
This patch is submitted without an example of anything actually
using subcommands, but a followup patch will convert the
llvm-pdbdump tool to use subcommands.
Reviewed By: beanz
llvm-svn: 274171
This gets rid of the memory fence in the hot path (dereferencing the
ManagedStatic), trading for an extra mutex lock in the cold path (when
the ManagedStatic was uninitialized). Since this only happens on the
first accesses it shouldn't matter much. On strict architectures like
x86 this removes any atomic instructions from the hot path.
Also remove the tsan annotations, tsan knows how standard atomics work
so they should be unnecessary now.
llvm-svn: 274131
This allows us to query about the endianness without having to
look at DataLayout. The API will be used (and tested) in lld,
in order to find out the endianness of BitcodeFiles.
Briefly discussed with Rafael.
llvm-svn: 274090
Our existing yaml::Output code writes tags immediately when mapTag is called, without any state handling. This results in tags on sequence elements being written before the element itself. For example, we see this:
SomeArray: !elem_type
- key1: 1
key2: 2 !elem_type2
- key3: 3
key4: 4
We should instead see:
SomeArray:
- !elem_type
key1: 1
key2: 2
- !elem_type2
key3: 3
key4: 4
Our reader handles reading properly, so this bug only impacts writing yaml sequences with tagged elements.
As a test for this I've modified the Mach-O yaml encoding to allways apply the !mach-o tag when encoding MachOYAML::Object entries. This results in the !mach-o tag appearing as expected in dumped fat files.
llvm-svn: 274067
This allows command line tools to use syntaxes like the following:
llvm-foo.exe command1 -o1 -o2
llvm-foo.exe command2 -p1 -p2
Where command1 and command2 contain completely different sets of
valid options. This is backwards compatible with previous uses
of llvm cl which did not support subcommands, as any option
which specifies no optional subcommand (e.g. all existing
code) goes into a special "top level" subcommand that expects
dashed options to appear immediately after the program name.
For example, code which is subcommand unaware would generate
a command line such as the following, where no subcommand
is specified:
llvm-foo.exe -q1 -q2
The top level subcommand can co-exist with actual subcommands,
as it is implemented as an actual subcommand which is searched
if no explicit subcommand is specified. So llvm-foo.exe as
specified above could be written so as to support all three
aforementioned command lines simultaneously.
There is one additional "special" subcommand called AllSubCommands,
which can be used to inject an option into every subcommand.
This is useful to support things like help, so that commands
such as:
llvm-foo.exe --help
llvm-foo.exe command1 --help
llvm-foo.exe command2 --help
All work and display the help for the selected subcommand
without having to explicitly go and write code to handle each
one separately.
This patch is submitted without an example of anything actually
using subcommands, but a followup patch will convert the
llvm-pdbdump tool to use subcommands.
Reviewed By: beanz
Differential Revision: http://reviews.llvm.org/D21485
llvm-svn: 274054
Summary: Actually the list of cached files is sorted by file size, not by last accessed time. Also remove unused file access time param for a helper function.
Reviewers: joker-eph, chandlerc, davide
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D21639
llvm-svn: 273852
Darwin added support in its Xcode 8.0 tools (released in the beta) for universal
files where offsets and sizes for the objects are 64-bits to allow support for
objects contained in universal files to be larger then 4gb. The change is very
straight forward. There is a new magic number that differs by one bit, much
like the 64-bit Mach-O files. Then there is a new structure that follow the
fat_header that has the same layout but with the offset and size fields using
64-bit values instead of 32-bit values.
rdar://26899493
llvm-svn: 273207
Trying to expand short names with a relative path doesn't work, so this
first gets the module name to get a full path (which can still have short
names).
llvm-svn: 273171
Some build systems use the short (8.3) file names on Windows, especially if the path has spaces in it. The shortening made it impossible for clang to distinguish between clang.exe, clang++.exe, and clang-cl.exe. So this expands short names in the first argument and does wildcard expansion for the rest.
Differential Revision: http://reviews.llvm.org/D21420
llvm-svn: 272967
- We lacked a short unique identifier for a statistics, so I renamed the
current "Name" field that just contained the DEBUG_TYPE name of the
current file to DebugType and added a new "Name" field that contains
the C++ identifier of the statistic variable.
- Add the -stats-json option which outputs statistics in json format.
Differential Revision: http://reviews.llvm.org/D20995
llvm-svn: 272826
Differential Revision: http://reviews.llvm.org/D19842
Corresponding clang patch: http://reviews.llvm.org/D19843
Re-commit after addressing issues with of generating too many warnings for Windows and asan test failures
Patch by Eric Niebler
llvm-svn: 272555
[cpu-detection] [amdfam10] Return barcelona, and amdfam10 for all other
subtypes. Address Bug 28067.
Along with the refactoring of Host.cpp, getHostCPUName() was modified to
return more precise types for CPUs in amdfam10.
However, callers of getHostCPUName() do string matching on type, so this
cannot be modified.
Currently there is support in the x86 backend for barcelona.
For all other subtypes the assumed return value is amdfam10.
Fix: getHostCPUName() returns barcelona subtype and amdfam10 for all
others. This can be extended further when support for the other subtypes
is added.
Differential revision: http://reviews.llvm.org/D21193
llvm-svn: 272333
Summary: Remove architecture subtype from the string returned by getHostCPUName(). String matching done on type.
Reviewers: llvm-commits, echristo
Subscribers: mehdi_amini
Differential Revision: http://reviews.llvm.org/D21193
llvm-svn: 272328
looking for it along $PATH. This allows installs of LLVM tools outside of
$PATH to find the symbolizer and produce pretty backtraces if they crash.
llvm-svn: 272232
Summary:
Break on all switch cases for outer and inner switches.
No functionality changed.
Reviewers: llvm-commits, sanjoy
Differential Revision: http://reviews.llvm.org/D21158
llvm-svn: 272228
Summary:
Now DISubroutineType has a 'cc' field which should be a DW_CC_ enum. If
it is present and non-zero, the backend will emit it as a
DW_AT_calling_convention attribute. On the CodeView side, we translate
it to the appropriate enum for the LF_PROCEDURE record.
I added a new LLVM vendor specific enum to the list of DWARF calling
conventions. DWARF does not appear to attempt to standardize these, so I
assume it's OK to do this until we coordinate with GCC on how to emit
vectorcall convention functions.
Reviewers: dexonsmith, majnemer, aaboud, amccarth
Subscribers: mehdi_amini, llvm-commits
Differential Revision: http://reviews.llvm.org/D21114
llvm-svn: 272197
The architecture enumeration is shared across ARM and AArch64. However, the
data is not. The code incorrectly would index into the array using the
architecture index which was offset by the ARMv7 architecture enumeration. We
do not have a marker for indicating the architectural family to which the
enumeration belongs so we cannot be clever about offsetting the index (at least
it is not immediately apparent to me). Instead, fall back to the tried-and-true
method of slowly iterating the array (its not a large array, so the impact of
this is not too high).
Because of the incorrect indexing, if we were lucky, we would crash, but usually
we would return an invalid StringRef. We did not have any tests for the AArch64
target parser previously;. Extend the previous tests I had added for ARM to
cover AArch64 for ensuring that we return expected StringRefs.
Take the opportunity to change some iterator types to references.
This work is needed to support parsing `.arch name` directives in the AArch64
target asm parser.
llvm-svn: 272145
Summary:
Following D20970 (committed as r271726).
This is a substantial refactoring of the host CPU detection code.
There is no functionality change intended, but the changes are extensive.
Definitions of architecture types and subtypes are by no means exhaustive or
perfectly defined, but a fair starting point.
Suggestions for futher improvements are welcome.
Reviewers: llvm-commits
Differential Revision: http://reviews.llvm.org/D20988
llvm-svn: 271921
CALL_ONCE_... macro in the legacy pass manager with the new
llvm::call_once facility.
Nothing changed sicne the last attempt in r271781 which I reverted in
r271788. At least one of the failures I saw was spurious, and I want to
make sure the other failures are real before I work around them -- they
appeared to only effect ppc64le and ppc64be.
Original commit message of r271781:
----
[LPM] Reinstate r271652 to replace the CALL_ONCE_... macro in the legacy
pass manager with the new llvm::call_once facility.
This reverts commit r271657 and re-applies r271652 with a fix to
actually work with arguments. In the original version, we just ended up
directly calling std::call_once via ADL because of the std::once_flag
argument. The llvm::call_once never worked with arguments. Now,
llvm::call_once is a variadic template that perfectly forwards
everything. As a part of this it had to move to the header and we use
a generic functor rather than an explict function pointer. It would be
nice to use std::invoke here but we don't have it yet. That means
pointer to members won't work here, but that seems a tolerable
compromise.
I've also tested this by forcing the fallback path, so hopefully it
sticks this time.
----
Original commit message of r271652:
----
[LPM] Replace the CALL_ONCE_... macro in the legacy pass manager with
the new llvm::call_once facility.
This facility matches the standard APIs and when the platform supports
it actually directly uses the standard provided functionality. This is
both more efficient on some platforms and much more TSan friendly.
The only remaining user of the cas_flag and home-rolled atomics is the
fallback implementation of call_once. I have a patch that removes them
entirely, but it needs a Windows patch to land first.
This alone substantially cleans up the macros for the legacy pass
manager, and should subsume some of the work Mehdi was doing to clear
the path for TSan testing of ThinLTO, a really important step to have
reliable upstream testing of ThinLTO in all forms.
----
llvm-svn: 271800
There appears to be a strange exception thrown and crash using call_once
on a PPC build bot, and a *really* weird windows link error for
GCMetadata.obj. Still need to investigate the cause of both problems.
Original change summary:
[LPM] Reinstate r271652 to replace the CALL_ONCE_... macro in the legacy
pass manager with the new llvm::call_once facility.
llvm-svn: 271788
pass manager with the new llvm::call_once facility.
This reverts commit r271657 and re-applies r271652 with a fix to
actually work with arguments. In the original version, we just ended up
directly calling std::call_once via ADL because of the std::once_flag
argument. The llvm::call_once never worked with arguments. Now,
llvm::call_once is a variadic template that perfectly forwards
everything. As a part of this it had to move to the header and we use
a generic functor rather than an explict function pointer. It would be
nice to use std::invoke here but we don't have it yet. That means
pointer to members won't work here, but that seems a tolerable
compromise.
I've also tested this by forcing the fallback path, so hopefully it
sticks this time.
Original commit message:
----
[LPM] Replace the CALL_ONCE_... macro in the legacy pass manager with
the new llvm::call_once facility.
This facility matches the standard APIs and when the platform supports
it actually directly uses the standard provided functionality. This is
both more efficient on some platforms and much more TSan friendly.
The only remaining user of the cas_flag and home-rolled atomics is the
fallback implementation of call_once. I have a patch that removes them
entirely, but it needs a Windows patch to land first.
This alone substantially cleans up the macros for the legacy pass
manager, and should subsume some of the work Mehdi was doing to clear
the path for TSan testing of ThinLTO, a really important step to have
reliable upstream testing of ThinLTO in all forms.
llvm-svn: 271781
This is currently used by clang to lock access to modules; improve the
error message so that clang can use better output messages from locking
error issues.
rdar://problem/26529101
Differential Review: http://reviews.llvm.org/D20942
llvm-svn: 271755
Summary:
Follow-up to D20926 (committed as r271595, r271596).
This patch is in preparation for a substantial refactoring of the code.
No functionality changed.
Differential Revision: http://reviews.llvm.org/D20970
llvm-svn: 271726
code. To make the diffs easier to read, clang-format everything first.
No functionality changed.
Patch by Alina Sbirlea!
http://reviews.llvm.org/D20926
llvm-svn: 271595
D19271.
Previous attempt was broken by NetBSD, so in this version I've made the
fallback path generic rather than Windows specific and sent both Windows
and NetBSD to it.
I've also re-formatted the code some, and used an exact clone of the
code in PassSupport.h for doing manual call-once using our atomics
rather than rolling a new one.
If this sticks, we can replace the fallback path for Windows with
a Windows-specific implementation that is more reliable.
Original commit message:
This patch adds an llvm_call_once which is a wrapper around
std::call_once on platforms where it is available and devoid
of bugs. The patch also migrates the ManagedStatic mutex to
be allocated using llvm_call_once.
These changes are philosophically equivalent to the changes
added in r219638, which were reverted due to a hang on Win32
which was the result of a bug in the Windows implementation
of std::call_once.
Differential Revision: http://reviews.llvm.org/D5922
llvm-svn: 271558
except for CompareAndSwap. That is the only one still being used
anywhere now that statistics have been moved onto std::atomic.
Also, add a warning to the header that we shouldn't introduce more uses
of these old style atomics and instead should be using C++11's
std::atomic facilities.
Really hoping that we can hammer out the last couple of users here and
replace them with something more localized and/or principled, but
figured this was a pretty good start. =]
Note that this patch will need to be reverted if r271504 needs to be
reverted as that removes the last user of these. However, the biggest
risk for that patch was MSVC 2013 and at least one bot has already
passed where it would have failed there. I've tested MSVC 2015 using
their web interfaces and other platforms seem fine, so I'm optimistic.
Differential Revision: http://reviews.llvm.org/D20901
llvm-svn: 271540
warning: cast from type ‘const void*’ to type
‘llvm::PrettyStackTraceEntry*’ casts away qualifiers [-Wcast-qual]
PrettyStackTraceHead = (PrettyStackTraceEntry*)Top;
llvm-svn: 271069
This will be needed in order to consistently return an Error
to clients of the API being developed in D20268.
Differential Revision: http://reviews.llvm.org/D20550
llvm-svn: 270967
APInt::operator+(uint64_t) just forwarded to operator+(const APInt&).
Constructing the APInt for the RHS takes an allocation which isn't
required. Also, for APInt's in the slow path, operator+ would
call add() internally which iterates over both arrays of values. Instead
we can use add_1 and sub_1 which only iterate while there is something to do.
Using the memory for 'opt -O2 verify-uselistorder.lto.opt.bc -o opt.bc'
(see r236629 for details), this reduces the number of allocations from
23.9M to 22.7M.
llvm-svn: 270959
StringError can be used to represent Errors that aren't recoverable based on
the error type, but that have a useful error message that can be reported to
the user or logged.
llvm-svn: 270948
APInt::slt was copying the LHS and RHS in to temporaries then making
them unsigned so that it could use an unsigned comparision. It did
this even on the paths which were trivial to give results for, such
as the sign bit of the LHS being set while RHS was not set.
This changes the logic to return out immediately in the trivial cases,
and use an unsigned comparison in the remaining cases. But this time,
just use the unsigned comparison directly without creating any temporaries.
This works because, for example:
true = (-2 slt -1) = (0xFE ult 0xFF)
Also added some tests explicitly for slt with APInt's larger than 64-bits
so that this new code is tested.
Using the memory for 'opt -O2 verify-uselistorder.lto.opt.bc -o opt.bc'
(see r236629 for details), this reduces the number of allocations from
26.8M to 23.9M.
llvm-svn: 270881
At some point we're going to need libObject to have this dependency, but as it is now this is causing too many headaches. This commit will reduce the linkage to just llvm-objdump where it is strictly needed, and we'll cross the libObject bridge later when we need it.
llvm-svn: 270866
There's already a ARMTargetParser,now adding a similar one for aarch64.
so we can use it to do ARCH/CPU/FPU parsing in clang and llvm, instead of
string comparison.
Patch by Jojo Ma.
llvm-svn: 270687
This should fix PR27855. We have some terrible hacks in the CMake to add linking SYSTEM_LIBS to all tools. I think we need a better way to do this in the future.
llvm-svn: 270605
the C standard library implementation in use.
This works around a glibc bug in the backtrace() function where it fails to
produce a backtrace on x86_64 if libgcc / libunwind is statically linked.
llvm-svn: 270276
- glibc is dynamically linked, and
- libgcc_s is unavailable (for instance, another library is being used to
provide the compiler runtime or libgcc is statically linked), and
- the target is x86_64.
If we run backtrace() and it fails to find any stack frames, try using
_Unwind_Backtrace instead if available.
llvm-svn: 269992
Summary:
MONITORX/MWAITX instructions provide similar capability to the MONITOR/MWAIT
pair while adding a timer function, such that another termination of the MWAITX
instruction occurs when the timer expires. The presence of the MONITORX and
MWAITX instructions is indicated by CPUID 8000_0001, ECX, bit 29.
The MONITORX and MWAITX instructions are intercepted by the same bits that
intercept MONITOR and MWAIT. MONITORX instruction establishes a range to be
monitored. MWAITX instruction causes the processor to stop instruction execution
and enter an implementation-dependent optimized state until occurrence of a
class of events.
Opcode of MONITORX instruction is "0F 01 FA". Opcode of MWAITX instruction is
"0F 01 FB". These opcode information is used in adding tests for the
disassembler.
These instructions are enabled for AMD's bdver4 architecture.
Patch by Ganesh Gopalasubramanian!
Reviewers: echristo, craig.topper, RKSimon
Subscribers: RKSimon, joker.eph, llvm-commits
Differential Revision: http://reviews.llvm.org/D19795
llvm-svn: 269911
Summary:
Add support to control where files for a distributed backend (the
individual index files and optional imports files) are created.
This is invoked with a new thinlto-prefix-replace option in the gold
plugin and llvm-lto. If specified, expects a string of the form
"oldprefix:newprefix", and instead of generating these files in the
same directory path as the corresponding bitcode file, will use a path
formed by replacing the bitcode file's path prefix matching oldprefix
with newprefix.
Also add a new replace_path_prefix helper to Path.h in libSupport.
Depends on D19636.
Reviewers: joker.eph
Subscribers: llvm-commits, joker.eph
Differential Revision: http://reviews.llvm.org/D19644
llvm-svn: 269771
This reverts commit r221331 and reinstate r220932 as discussed in D19271.
Original commit message was:
This patch adds an llvm_call_once which is a wrapper around
std::call_once on platforms where it is available and devoid
of bugs. The patch also migrates the ManagedStatic mutex to
be allocated using llvm_call_once.
These changes are philosophically equivalent to the changes
added in r219638, which were reverted due to a hang on Win32
which was the result of a bug in the Windows implementation
of std::call_once.
Differential Revision: http://reviews.llvm.org/D5922
From: Mehdi Amini <mehdi.amini@apple.com>
llvm-svn: 269577
This patch corresponds to review:
http://reviews.llvm.org/D19683
Simply adds the bits for being able to specify -mcpu=pwr9 to the back end.
llvm-svn: 268950
Summary:
As per the discussion on LLVM-dev this patch proposes removing LLVM_ENABLE_TIMESTAMPS.
The only complicated bit of this patch is the Windows support. On windows we used to log an error if /INCREMENTAL was passed to the linker when timestamps were disabled.
With this change since timestamps in code are always disabled we will always compile on windows with /Brepro unless /INCREMENTAL is specified, and we will log a warning when /INCREMENTAL is specified to notify the user that the build will be non-deterministic.
See: http://lists.llvm.org/pipermail/llvm-dev/2016-May/098990.html
Reviewers: bogner, silvas, rnk
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D19892
llvm-svn: 268670
In the current implementation compiler only prints stack trace
to console after crash. This patch adds saving of minidump
files which contain a useful subset of the information for
further debugging.
Differential Revision: http://reviews.llvm.org/D18216
llvm-svn: 268519
We wish to re-use this from llvm-pdbdump, and it provides a nice
way to print structured data in scoped format that could prove
useful for many other dumping tools as well. Moving to support
and changing name to ScopedPrinter to better reflect its purpose.
llvm-svn: 268342
In gcc, \ escapes every character in response files. It is true that this makes
it harder to mention Windows files in rsp files, but not doing this means clang
disagrees with gcc, and also disagrees with the shell (on non-Windows) which
rsp file quoting is supposed to match. clang isn't free to choose what to do
here.
In general, the idea for response files is to take bits of your command line
and write them to a file unchanged, and have things work the same way. Since
the command line would've been interpreted by the shell, things in the rsp file
need to be subject to the same shell quoting rules.
People who want to put Windows-style paths in their response files either need
to do any of:
* escape their backslashes
* or use clang-cl which uses cl.exe/cmd.exe quoting rules
* pass --rsp-quoting=windows to clang to tell it to use
cl.exe/cmd.exe quoting rules for response files.
Fixes PR27464.
http://reviews.llvm.org/D19417
llvm-svn: 267556
Removed some unused headers, replaced some headers with forward class declarations.
Found using simple scripts like this one:
clear && ack --cpp -l '#include "llvm/ADT/IndexedMap.h"' | xargs grep -L 'IndexedMap[<]' | xargs grep -n --color=auto 'IndexedMap'
Patch by Eugene Kosov <claprix@yandex.ru>
Differential Revision: http://reviews.llvm.org/D19219
From: Mehdi Amini <mehdi.amini@apple.com>
llvm-svn: 266595
By running TSAN on the ThreadPool unit tests it was discovered that the
threads in the pool can pop tasks off the queue at the same time the
"wait" routine is trying to check if the task queue is empty. This patch
fixes this problem by checking for active threads in the waiter before
checking whether the queue is empty.
Patch by Jason Henline.
Differential Revision: http://reviews.llvm.org/D18811
Reviewers: joker.eph, jlebar
llvm-svn: 265618
Some Include What You Use suggestions were used too.
Use anonymous namespaces in source files.
Differential revision: http://reviews.llvm.org/D18778
llvm-svn: 265454
Incremental LTO will usea cache to store object files.
This patch handles the pruning part of the cache, exposing
a few knobs:
- Pruning interval: the implementation keeps a "timestamp" file in the
directory and will scan it only after a given interval since the
last modification of the timestamp file. This is for performance
purpose, we don't want to scan continuously the folder.
- Entry expiration: this is the time after which a file that hasn't
been used is remove from the cache.
- Maximum size: expressed in percentage of the available disk space,
it helps to avoid that we blow up the disk space.
http://reviews.llvm.org/D18422
From: Mehdi Amini <mehdi.amini@apple.com>
llvm-svn: 265209
Provide a class to generate a SHA1 from a sequence of bytes, and
a convenience raw_ostream adaptor.
This will be used to provide a "build-id" by hashing the Module
block when writing bitcode. ThinLTO will use this information for
incremental build.
Reapply r265094 which was reverted in r265102 because it broke
MSVC bots (constexpr is not supported).
http://reviews.llvm.org/D16325
From: Mehdi Amini <mehdi.amini@apple.com>
llvm-svn: 265107
This reverts commit r265096, r265095, and r265094.
Windows build is broken, and the validation does not pass.
From: Mehdi Amini <mehdi.amini@apple.com>
llvm-svn: 265102
Provide a class to generate a SHA1 from a sequence of bytes, and
a convenience raw_ostream adaptor.
This will be used to provide a "build-id" by hashing the Module
block when writing bitcode. ThinLTO will use this information for
incremental build.
From: Mehdi Amini <mehdi.amini@apple.com>
llvm-svn: 265094
Summary: Adapted from Boost::filesystem.
(This is a reapply by reverting commit r265080 and fixing the WinAPI part)
Differential Revision: http://reviews.llvm.org/D18467
From: Mehdi Amini <mehdi.amini@apple.com>
llvm-svn: 265082
Summary: Adapted from Boost::filesystem.
(This is a reapply by reverting commit r265062 and fixing the WinAPI part)
Differential Revision: http://reviews.llvm.org/D18467
From: Mehdi Amini <mehdi.amini@apple.com>
llvm-svn: 265068
The implementation is fairly obvious. This is preparation for using
some blobs in bitcode.
For clarity (and perhaps future-proofing?), I moved the call to
JumpToBit in BitstreamCursor::readRecord ahead of calling
MemoryObject::getPointer, since JumpToBit can theoretically (a) read
bytes, which (b) invalidates the blob pointer.
This isn't strictly necessary the two memory objects we have:
- The return of RawMemoryObject::getPointer is valid until the memory
object is destroyed.
- StreamingMemoryObject::getPointer is valid until the next chunk is
read from the stream. Since the JumpToBit call is only going ahead
to a word boundary, we'll never load another chunk.
However, reordering makes it clear by inspection that the blob returned
by BitstreamCursor::readRecord will be valid.
I added some tests for StreamingMemoryObject::getPointer and
BitstreamCursor::readRecord.
llvm-svn: 264549
the rename operation on 3 error conditions of ReplaceFileW() that it was
previously bailing out on.
Patch by Douglas Yung!
Differential Revision: http://reviews.llvm.org/D17903
llvm-svn: 264477
Optimize output of MDStrings in bitcode. This emits them in big blocks
(currently 1024) in a pair of records:
- BULK_STRING_SIZES: the sizes of the strings in the block, and
- BULK_STRING_DATA: a single blob, which is the concatenation of all
the strings.
Inspired by Mehdi's similar patch, http://reviews.llvm.org/D18342, this
should (a) slightly reduce bitcode size, since there is less record
overhead, and (b) greatly improve reading speed, since blobs are super
cheap to deserialize.
I needed to add support for blobs to streaming input to get the test
suite passing.
- StreamingMemoryObject::getPointer reads ahead and returns the
address of the blob.
- To avoid a possible reallocation of StreamingMemoryObject::Bytes,
BitstreamCursor::readRecord needs to move the call to JumpToEnd
forward so that getPointer is the last bitstream operation.
llvm-svn: 264409
Differential Revision: http://reviews.llvm.org/D18456
This is a re-commit of r264387 and r264388 after fixing a typo.
From: Mehdi Amini <mehdi.amini@apple.com>
llvm-svn: 264392
This reverts commit r264387.
Bots are broken in various ways, I need to take one commit at a time...
From: Mehdi Amini <mehdi.amini@apple.com>
llvm-svn: 264390
This reverts commit r264388.
Bots are broken in various ways, I need to take one commit at a time...
From: Mehdi Amini <mehdi.amini@apple.com>
llvm-svn: 264389
Summary:
StringMap ctor accepts an initialize size, but expect it to be
rounded to the next power of 2. The ctor can handle that directly
instead of expecting clients to round it. Also, since the map will
resize itself when 75% full, take this into account an initialize
a larger initial size to avoid any growth.
Reviewers: dblaikie
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D18344
From: Mehdi Amini <mehdi.amini@apple.com>
llvm-svn: 264385
This is a temporary crutch to enable code that currently uses std::error_code
to be incrementally moved over to Error. Requiring all Error instances be
convertible enables clients to call errorToErrorCode on any error (not just
ECErrors created by conversion *from* an error_code).
This patch also moves code for Error from ErrorHandling.cpp into a new
Error.cpp file.
llvm-svn: 264221
This patch introduces the Error classs for lightweight, structured,
recoverable error handling. It includes utilities for creating, manipulating
and handling errors. The scheme is similar to exceptions, in that errors are
described with user-defined types. Unlike exceptions however, errors are
represented as ordinary return types in the API (similar to the way
std::error_code is used).
For usage notes see the LLVM programmer's manual, and the Error.h header.
Usage examples can be found in unittests/Support/ErrorTest.cpp.
Many thanks to David Blaikie, Mehdi Amini, Kevin Enderby and others on the
llvm-dev and llvm-commits lists for lots of discussion and review.
llvm-svn: 263609
Summary: This change adds a PACKAGE_VENDOR variable. When set it makes the version output more closely resemble the clang version output.
Reviewers: aprantl, bogner
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D18159
llvm-svn: 263566
Added new string conversion wrappers that convert between `std::string` (of UTF-8 bytes) and `std::wstring`, which is particularly useful for Win32 interop. Also fixed a missing string conversion for `getenv` on Win32, using these new wrappers.
The motivation behind this is to provide the support functions required for LLDB to work properly on Windows with non-ASCII data; however, the functions are not LLDB specific.
Patch by cameron314
Differential Revision: http://reviews.llvm.org/D17549
llvm-svn: 263247
It is possible to invoke these methods on an invalid input resulting in an
invalid substring construction. It seems that we do not have unit tests for
these methods. Tests to ensure that the invalid call is caught to follow in
clang.
Resolves PR26839.
llvm-svn: 262778
This patch updates cmake build scripts to build on Haiku. It adds Haiku x86_64 to config.guess.
Please consider reviewing.
Pathc by Jérôme Duval.
llvm-svn: 262038
Summary:
- Rename `"skylake"` == SkylakeServerProc to `"skylake-avx512"`
- Change `"skylake"` to denote SkylakeClientProc
- Fix the detection of cpu family 6 and model 94 to be
SkylakeClientProc instead of SkylakeServerProc
- Remove the `"cnl"` for CannonLake
Reviewers: craig.topper, delena
Subscribers: zansari, echristo, qcolombet, RKSimon, spatel, DavidKreitzer, mcrosier, llvm-commits
Differential Revision: http://reviews.llvm.org/D17090
llvm-svn: 261482
Summary:
Without this, this command
$ llvm-run llc -stop-after machine-cp -o - <( echo '' )
outputs an error, because we close stdout twice -- once when closing the
file opened for "-o", and again when closing outs().
Also clarify in the outs() definition that you can't ever call it if you
want to open your own raw_fd_ostream on stdout.
Reviewers: jroelofs, tstellarAMD
Subscribers: jholewinski, qcolombet, dsanders, llvm-commits
Differential Revision: http://reviews.llvm.org/D17422
llvm-svn: 261286
r260925 introduced a version of the *trim methods which is preferable
when trimming a single kind of character. Update all users in llvm.
llvm-svn: 260926
This patch avoids the initial memset at the cost of making iterators
slightly more complex. This should be beneficial as most SmallPtrSets
hold no or only a few elements, while iterating over them is less
common.
Differential Revision: http://reviews.llvm.org/D16672
llvm-svn: 260913
We always clear the unused bits in the most signifant word so there is
no need to mask them out in countLeadingZerosSlowCase().
Differential Revision: http://reviews.llvm.org/D16621
llvm-svn: 260911
As support expands to more runtimes, we'll need to
distinguish between more than just HSA and unknown.
This also lets us stop using unknown everywhere.
llvm-svn: 260790
Previously the code used getActiveBits() to determine the highest set
bit of each APInt first. However doing so requires the same amount of
memory accesses as simply comparing both numbers right away.
Removing all the active bit checks leads to simpler code and is faster
in my benchmark.
Differential Revision: http://reviews.llvm.org/D16620
llvm-svn: 260447
Summary:
This patch adds Windows support for a few of the llvm-config commands,
including cflags, ldflags, libs, and system-libs.
Currently llvm-config is untested, so this patch adds tests for the
commands that it fixes as well.
Reviewers: rnk
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D16762
llvm-svn: 260263
Most of the time we only hit the small case, so it is beneficial to pull
it out of the insert_imp() implementation. This improves compile time
at least for non-LTO builds.
Differential Revision: http://reviews.llvm.org/D16619
llvm-svn: 258908
at least as big as the mach header to be identified as a Mach-O file and
make sure smaller files are not identified as a Mach-O files but as
unknown files. Also fix identify_magic() so it looks at all 4 bytes of
the filetype field when determining the type of the Mach-O file.
Then fix the macho-invalid-header test case to check that it is an
unknown file and make sure it does not get the error for
object_error::parse_failed. And also update the unit tests.
llvm-svn: 258883
Summary:
This patch is provided in preparation for removing autoconf on 1/26. The proposal to remove autoconf on 1/26 was discussed on the llvm-dev thread here: http://lists.llvm.org/pipermail/llvm-dev/2016-January/093875.html
"I felt a great disturbance in the [build system], as if millions of [makefiles] suddenly cried out in terror and were suddenly silenced. I fear something [amazing] has happened."
- Obi Wan Kenobi
Reviewers: chandlerc, grosbach, bob.wilson, tstellarAMD, echristo, whitequark
Subscribers: chfast, simoncook, emaste, jholewinski, tberghammer, jfb, danalbert, srhines, arsenm, dschuff, jyknight, dsanders, joker.eph, llvm-commits
Differential Revision: http://reviews.llvm.org/D16471
llvm-svn: 258861
This patch was originally committed as r257885, but was reverted due to windows
failures. The cause of these failures has been fixed under r258677, hence
re-committing the original patch.
llvm-svn: 258683
Changes in X86.td:
I set features of Intel processors in incremental form: IVB = SNB + X HSW = IVB + X ..
I added Skylake client processor and defined it's features
FeatureADX was missing on KNL
Added some new features to appropriate processors SMAP, IFMA, PREFETCHWT1, VMFUNC and others
Differential Revision: http://reviews.llvm.org/D16357
llvm-svn: 258659
The feature flag is for VPERMB,VPERMI2B,VPERMT2B and VPMULTISHIFTQB instructions.
More about the instruction can be found in:
hattps://software.intel.com/sites/default/files/managed/07/b7/319433-023.pdf
Differential Revision: http://reviews.llvm.org/D16190
llvm-svn: 258012
# The first commit's message is:
Revert "[ARM] Add DSP build attribute and extension targeting"
This reverts commit b11cc50c0b4a7c8cdb628abc50b7dc226ff583dc.
# This is the 2nd commit message:
Revert "[ARM] Add new system registers to ARMv8-M Baseline/Mainline"
This reverts commit 837d08454e3e5beb8581951ac26b22fa07df3cd5.
llvm-svn: 257916
This means that the DEBUG_TYPE cannot take a comma anymore. All existing passes
conform to this rule.
Differential Revision: http://reviews.llvm.org/D15645
llvm-svn: 257466
Apparently the preferred version is the incredibly complicated
VerifyVersionInfoW function.
Rename the function to avoid potential future name clashes.
llvm-svn: 257415
This reverts commit r254363.
load64BitDebugHelp() has the side effect of loading dbghelp and setting
globals. It should be called in no-asserts builds as well as debug
builds.
llvm_unreachable is also not appropriate here, since we actually want to
return if dbghelp couldn't be loaded in a non-asserts build.
llvm-svn: 257384
This removes ifdefs and fixes the build for users of the Win8.0 SDK,
which I happen to be. Upgrading is not hard, but executing the same code
everywhere seems better.
llvm-svn: 257379
The new leader is known anyway so we can return it for some micro
optimization in code where it is easy to pass along the result to the
next join().
llvm-svn: 257130
Change Triple::get32BitArchVariant to return arm/armeb as the 32bit
variant of aarch64/aarch64_be and do the same change for the oppoiste
direction in Triple::get64BitArchVariant.
Differential revision: http://reviews.llvm.org/D15529
llvm-svn: 257048
confused with what version of mingw is actually installed on the buildbot, and
for now I will just assume this is an unknown version which does not ship with
VersionHelpers.h.
llvm-svn: 256902
This patch is similar to the Python issue#11395. We need to cap the output
size to 32767 on Windows to work around the size limit of WriteConsole().
Reference: https://bugs.python.org/issue11395
Writing a test for this bug turns out to be harder than I thought. I am
still working on it (see phabricator review D15705).
Differential Revision: http://reviews.llvm.org/D15553
llvm-svn: 256892
Summary:
Hi Rafael,
Would you be able to review this patch, please?
(Clang part of the patch is D15832).
When clang runs an external tool, e.g. a linker, it may create a command line that exceeds the length limit.
Clang uses the llvm::sys::argumentsFitWithinSystemLimits function to check if command line length fits the OS
limitation. There are two problems in this function that may cause exceeding of the limit:
1. It ignores the length of the program path in its calculations. On the other hand, clang adds the program
path to the command line when it runs the program.
2. It assumes no space character is inserted after the last argument, which is not true for Windows. The flattenArgs function adds the trailing space for *each* argument. The result of this is that the terminating NULL character is not counted and may be placed beyond the length limit if the command line is exactly 32768 characters long. The WinAPI's CreateProcess does not find the NULL character and fails.
Reviewers: rafael, ygao, probinson
Subscribers: asl, llvm-commits
Differential Revision: http://reviews.llvm.org/D15831
llvm-svn: 256866
InitMCObjectFileInfo was trying to override the triple in awkward ways.
For example, a triple specifying COFF but not Windows was forced as ELF.
This makes it easy for internal invariants to get violated, such as
those which triggered PR25912.
This fixes PR25912.
llvm-svn: 256226
Type specific declarations have been moved to Type.h and error handling
routines have been moved to ErrorHandling.h. Both are included in Core.h
so nothing should change for projects directly including the headers,
but transitive dependencies may be affected.
llvm-svn: 255965
This creates the initial infrastructure for writing ELF output files. It
doesn't yet have any implementation for encoding instructions.
Differential Revision: http://reviews.llvm.org/D15555
llvm-svn: 255869
It looks like the code this patch deletes is based on a misunderstanding of
what guarantees writev provides. In particular, writev with 1 iovec is
not "more atomic" than a write.
Testing on OS X shows that both write and writev from multiple processes
can be intermixed.
llvm-svn: 255837
Summary: On Windows, the allocation granularity can be significantly
larger than a page (64K), so with many small objects, just clearing
the FreeMem list rapidly leaks quite a bit of virtual memory space
(if not rss). Fix that by only removing those parts of the FreeMem
blocks that overlap pages for which we are applying memory permissions,
rather than dropping the FreeMem blocks entirely.
Reviewers: lhames
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D15202
llvm-svn: 255760
the feature flag is essential for RDPKRU and WRPKRU instruction
more about the instruction can be found in the SDM rev 56, vol 2 from http://www.intel.com/sdm
Differential Revision: http://reviews.llvm.org/D15491
llvm-svn: 255644
This is a very simple implementation of a thread pool using C++11
thread. It accepts any std::function<void()> for asynchronous
execution. Individual task can be synchronize using the returned
future, or the client can block on the full queue completion.
In case LLVM is configured with Threading disabled, it falls back
to sequential execution using std::async with launch:deferred.
This is intended to support parallelism for ThinLTO processing in
linker plugin, but is generic enough for any other uses.
This is a recommit of r255444 ; trying to workaround a bug in the
MSVC 2013 standard library. I think I was hit by:
http://connect.microsoft.com/VisualStudio/feedbackdetail/view/791185/std-packaged-task-t-where-t-is-void-or-a-reference-class-are-not-movable
Recommit of r255589, trying to please g++ as well.
Differential Revision: http://reviews.llvm.org/D15464
From: mehdi_amini <mehdi_amini@91177308-0d34-0410-b5e6-96231b3b80d8>
llvm-svn: 255593
This is a very simple implementation of a thread pool using C++11
thread. It accepts any std::function<void()> for asynchronous
execution. Individual task can be synchronize using the returned
future, or the client can block on the full queue completion.
In case LLVM is configured with Threading disabled, it falls back
to sequential execution using std::async with launch:deferred.
This is intended to support parallelism for ThinLTO processing in
linker plugin, but is generic enough for any other uses.
This is a recommit of r255444 ; trying to workaround a bug in the
MSVC 2013 standard library. I think I was hit by:
http://connect.microsoft.com/VisualStudio/feedbackdetail/view/791185/std-packaged-task-t-where-t-is-void-or-a-reference-class-are-not-movable
Differential Revision: http://reviews.llvm.org/D15464
From: Mehdi Amini <mehdi.amini@apple.com>
llvm-svn: 255589
This is a very simple implementation of a thread pool using C++11
thread. It accepts any std::function<void()> for asynchronous
execution. Individual task can be synchronize using the returned
future, or the client can block on the full queue completion.
In case LLVM is configured with Threading disabled, it falls back
to sequential execution using std::async with launch:deferred.
This is intended to support parallelism for ThinLTO processing in
linker plugin, but is generic enough for any other uses.
Differential Revision: http://reviews.llvm.org/D15464
From: Mehdi Amini <mehdi.amini@apple.com>
llvm-svn: 255444
I am seeing disappointing clang performance on a large PowerPC64
Linux box. GetRandomNumberSeed() does a buffered read from
/dev/urandom to seed its PRNG. As a result we read an entire page
even though we only need 4 bytes.
With every clang task reading a page worth of /dev/urandom we
end up spending a large amount of time stuck on kernel spinlock.
Patch by Anton Blanchard!
llvm-svn: 255386
Introduced DIMacro and DIMacroFile debug info metadata in the LLVM IR to support macros.
Differential Revision: http://reviews.llvm.org/D14687
llvm-svn: 255245
Add ARMv8.2-A to TargetParser, so that it can be used by the clang
command-line options and the .arch directive.
Most testing of this will be done in clang, checking that the
command-line options that this enables work.
Differential Revision: http://reviews.llvm.org/D15037
llvm-svn: 254400
(This is the second attempt to submit this patch. The first caused two assertion
failures and was reverted. See https://llvm.org/bugs/show_bug.cgi?id=25687)
The patch in http://reviews.llvm.org/D13745 is broken into four parts:
1. New interfaces without functional changes (http://reviews.llvm.org/D13908).
2. Use new interfaces in SelectionDAG, while in other passes treat probabilities
as weights (http://reviews.llvm.org/D14361).
3. Use new interfaces in all other passes.
4. Remove old interfaces.
This patch is 3+4 above. In this patch, MBB won't provide weight-based
interfaces any more, which are totally replaced by probability-based ones.
The interface addSuccessor() is redesigned so that the default probability is
unknown. We allow unknown probabilities but don't allow using it together
with known probabilities in successor list. That is to say, we either have a
list of successors with all known probabilities, or all unknown
probabilities. In the latter case, we assume each successor has 1/N
probability where N is the number of successors. An assertion checks if the
user is attempting to add a successor with the disallowed mixed use as stated
above. This can help us catch many misuses.
All uses of weight-based interfaces are now updated to use probability-based
ones.
Differential revision: http://reviews.llvm.org/D14973
llvm-svn: 254377
and the follow-up r254356: "Fix a bug in MachineBlockPlacement that may cause assertion failure during BranchProbability construction."
Asserts were firing in Chromium builds. See PR25687.
llvm-svn: 254366
The patch in http://reviews.llvm.org/D13745 is broken into four parts:
1. New interfaces without functional changes (http://reviews.llvm.org/D13908).
2. Use new interfaces in SelectionDAG, while in other passes treat probabilities
as weights (http://reviews.llvm.org/D14361).
3. Use new interfaces in all other passes.
4. Remove old interfaces.
This patch is 3+4 above. In this patch, MBB won't provide weight-based
interfaces any more, which are totally replaced by probability-based ones.
The interface addSuccessor() is redesigned so that the default probability is
unknown. We allow unknown probabilities but don't allow using it together
with known probabilities in successor list. That is to say, we either have a
list of successors with all known probabilities, or all unknown
probabilities. In the latter case, we assume each successor has 1/N
probability where N is the number of successors. An assertion checks if the
user is attempting to add a successor with the disallowed mixed use as stated
above. This can help us catch many misuses.
All uses of weight-based interfaces are now updated to use probability-based
ones.
Differential revision: http://reviews.llvm.org/D14973
llvm-svn: 254348
Summary:
This follows D14577 to treat ARMv6-J as an alias for ARMv6,
instead of an architecture in its own right.
The functional change is that the default CPU when targeting ARMv6-J
changes from arm1136j-s to arm1136jf-s, which is currently used as
the default CPU for ARMv6; both are, in fact, ARMv6-J CPUs.
The J-bit (Jazelle support) is irrelevant to LLVM, and it doesn't
affect code generation, attributes, optimizations, or anything else,
apart from selecting the default CPU.
Reviewers: rengolin, logan, compnerd
Subscribers: aemerson, llvm-commits, rengolin
Differential Revision: http://reviews.llvm.org/D14755
llvm-svn: 253675
Summary:
This patch changes the behavior of path::system_temp_directory() on Windows to be closer to GetTempPath Windows API call. Enforces path separator to be the native one, makes path absolute, etc. GetTempPath is not used directly because of limitations/implementation bugs on Windows 7.
Windows specific unit tests are added. Most of them runs in separated process with modified environment variables.
This change fixes FileSystemTest.CreateDir unittest that had been failing when run from Unix-like shell on Windows (Unix-like path separator (/) used in env variables).
Reviewers: chapuni, rafael, aaron.ballman
Subscribers: rafael, llvm-commits
Differential Revision: http://reviews.llvm.org/D14231
llvm-svn: 253345
setExecutable() should do everything that's needed to make the memory
executable on host, i.e. unconditionally set permissions + invalidate
instruction cache. llvm-rtdyld will be updated in my next commit.
Discusseed with: Lang Hames (as part of D13631).
llvm-svn: 253341
Useful utility function; this wasn't too hard to do before, but also wasn't
obviously discoverable. Make it explicit. Reviewed offline by Michael
Gottesman.
llvm-svn: 253254
Summary:
* ARMv6KZ is the "canonical" name, given in the ARMARM
* ARMv6Z is an "official abbreviation" for it, mentioned in the ARMARM
* ARMv6ZK is a popular misspelling, which we should support as an alias.
The patch corrects the handling of the names.
Functional changes:
* ARMv6Z no longer treated as an architecture in its own right
* ARMv6ZK renamed to ARMv6KZ, accepting ARMv6ZK as an alias
* arm1176jz-s and arm1176jzf-s recognized as ARMv6ZK, instead of ARMv6K
* default ARMv6K CPU changed to arm1176j-s
Reviewers: rengolin, logan, compnerd
Subscribers: aemerson, llvm-commits, rengolin
Differential Revision: http://reviews.llvm.org/D14568
llvm-svn: 253206
Summary:
* declare FPUNames, ARCHNames, ARCHExtNames, HWDivNames, CPUNames
as static const
* implement getDefaultExtensions with a StringSwitch, in the same
way getDefaultFPU is implemented
Reviewers: rengolin
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D14648
llvm-svn: 253201
Instead of defaulting to an empty string, we want to default to
the CPU 'generic' in the case of no valid default CPU being found,
(as long as the architecture is actually valid).
In order to do this we add a default FPU for each architecture, as
well as falling back to architecture defaults for extensions and FPU
in the case of a generic CPU is specified.
llvm-svn: 253198
Summary:
This patch changes ARMV5, ARMV5E, ARMV6SM, ARMV6HL, ARMV7, ARMV7L,
ARMV7HL, ARMV7EM to be treated as aliases for the corresponding
standard architectures, instead of as actual architectures.
Reviewers: rengolin
Subscribers: aemerson, llvm-commits, rengolin
Differential Revision: http://reviews.llvm.org/D14577
llvm-svn: 252903
Added "macro" option to "-debug-dump" flag, which trigger parsing and dumping of the ".debug_macinfo" section.
Differential Revision: http://reviews.llvm.org/D14294
llvm-svn: 252866
This patch adds DWARF values for the Delphi language and Borland C++
language extensions.
Reviewed by: dblaikie
Subscribers: llvm-commits, majnemer
Differential Revision: http://reviews.llvm.org/D14522
llvm-svn: 252776
Summary: Inlined callsites need to be emitted in debug info so that sample profile can be annotated to the correct inlined instance.
Reviewers: dnovillo, dblaikie
Subscribers: dblaikie, llvm-commits
Differential Revision: http://reviews.llvm.org/D14511
llvm-svn: 252768
llvm/lib/Support/Signals.cpp:66:13: warning: unused function 'printSymbolizedStackTrace' [-Wunused-function]
llvm/lib/Support/Signals.cpp:52:13: warning: function 'findModulesAndOffsets' has internal linkage but is not defined [-Wundefined-internal]
llvm-svn: 252418
Summary:
In general GetTempDir follows the same logic as the replaced code: checks env variables TMP, TEMP, USERPROFILE in order. However, it also perform other checks like making separators native (\), making the path absolute, etc.
This change fixes FileSystemTest.CreateDir unittest that had been failing when run from Unix-like shell on Windows (Unix-like path separator (/) used in env variables).
Reviewers: chapuni, rafael, aaron.ballman
Subscribers: rafael, llvm-commits
Differential Revision: http://reviews.llvm.org/D14231
llvm-svn: 252366
Summary:
llvm-symbolizer understands both PDBs and DWARF, so it is more likely to
succeed at symbolization. If llvm-symbolizer is unavailable, we will
fall back to dbghelp. This also makes our crash traces more similar
between Windows and Linux.
Reviewers: Bigcheese, zturner, chapuni
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D12884
llvm-svn: 252118
Summary:
The new function sys::path::user_cache_directory tries to discover
a directory suitable for cache storage for current system user.
On Windows and Darwin it returns a path to system-specific user cache directory.
On Linux it follows XDG Base Directory Specification, what is:
- use non-empty $XDG_CACHE_HOME env var,
- use $HOME/.cache.
Reviewers: chapuni, aaron.ballman, rafael
Subscribers: rafael, aaron.ballman, llvm-commits
Differential Revision: http://reviews.llvm.org/D13801
llvm-svn: 251784
These MachO file directives are used by linkers and other tools to provide
compatibility information, much like the existing .ios_version_min and
.macosx_version_min.
llvm-svn: 251569
GNU tools require elfiamcu to take up the entire OS field, so, e.g.
i?86-*-linux-elfiamcu is not considered a legal triple.
Make us compatible.
Differential Revision: http://reviews.llvm.org/D14081
llvm-svn: 251390
This adds support for the i?86-*-elfiamcu triple, which indicates the IAMCU psABI is used.
Differential Revision: http://reviews.llvm.org/D13977
llvm-svn: 251222
This list is produced by llvm-config --system-libs to be used
by external programs using the llvm libraries, such as creduce.
In r250501 llvm/Support/Windows/Path.inc started to use the constant
FOLDERID_Profile from libuuid.
llvm-svn: 251201
Summary: This patch replaces usage of deprecated SHGetFolderPathW with SHGetKnownFolderPath. The usage of SHGetKnownFolderPath is wrapped to allow queries for other "known" folders in the near future.
Reviewers: aaron.ballman, gbedwell
Subscribers: chapuni, llvm-commits
Differential Revision: http://reviews.llvm.org/D13753
llvm-svn: 250501
This patch adds the underlying infrastructure for an AVR backend to be included into LLVM. It is the first of a series of patches aimed at moving the out-of-tree AVR backend into the tree.
It consists of adding a new`Triple` target 'avr'.
llvm-svn: 250492
A PDB can be thought of as a very simple file system. It is
occasionally illuminating to see the contents of the underlying files.
Differential Revision: http://reviews.llvm.org/D13674
llvm-svn: 250356
On Windows, fs::rename() could fail is another process was reading the
file at the same time using fs::openFileForRead(). In most cases the user
wouldn't notice as fs::rename() will continue to retry for 2000ms. Typically
this is enough for the read to complete and a retry to succeed, but if the
disk is being it too hard then the response time might be longer than the
retry time and the rename would fail with a permission error.
Add FILE_SHARE_DELETE to the sharing flags for CreateFileW() in
fs::openFileForRead() and try ReplaceFileW() prior to MoveFileExW()
in fs::rename().
Based on an initial patch by Edd Dawson!
Differential Revision: http://reviews.llvm.org/D13647
llvm-svn: 250046
Stop relying on ilist implicit conversions from `value_type&` to
`iterator` in YAMLParser.cpp.
I eventually want to outlaw this entirely. It encourages
`getNextNode()` and `getPrevNode()` in iterator logic, which is
extremely fragile (and relies on them never returning `nullptr`).
FTR, there's nothing nefarious going on in this case, it was just easy
to clean up since the callers really wanted iterators to begin with.
llvm-svn: 249767
Problem was in SearchPathW function that does not attach an extension if file already has one.
That does not work for executables like ld.lld2 for example which require to have .exe extension but SearchPath thinks that its "lld2".
Solution was to add the extension manually.
Differential Revision: http://reviews.llvm.org/D13536
llvm-svn: 249696
llvm::format compiles down to snprintf which has no defined rounding for
floating point arguments, and MSVC has implemented it differently from
what the BSD libcs and glibc do. Try to emulate the glibc rounding
behavior to avoid changing tests.
While there simplify code a bit and move trivial methods inline.
llvm-svn: 248665
BranchProbability now is represented by its numerator and denominator in uint32_t type. This patch changes this representation into a fixed point that is represented by the numerator in uint32_t type and a constant denominator 1<<31. This is quite similar to the representation of BlockMass in BlockFrequencyInfoImpl.h. There are several pros and cons of this change:
Pros:
1. It uses only a half space of the current one.
2. Some operations are much faster like plus, subtraction, comparison, and scaling by an integer.
Cons:
1. Constructing a probability using arbitrary numerator and denominator needs additional calculations.
2. It is a little less precise than before as we use a fixed denominator. For example, 1 - 1/3 may not be exactly identical to 1 / 3 (this will lead to many BranchProbability unit test failures). This should not matter when we only use it for branch probability. If we use it like a rational value for some precise calculations we may need another construct like ValueRatio.
One important reason for this change is that we propose to store branch probabilities instead of edge weights in MachineBasicBlock. We also want clients to use probability instead of weight when adding successors to a MBB. The current BranchProbability has more space which may be a concern.
Differential revision: http://reviews.llvm.org/D12603
llvm-svn: 248633
Currently, the availability of DSP instructions (ACLE 6.4.7) is handled in a
hand-rolled tricky condition block in tools/clang/lib/Basic/Targets.cpp, with
a FIXME: attached.
This patch changes the handling of +t2dsp to be in line with other
architecture extensions.
Following a revert of r248152 and new review comments, this patch also includes
renaming FeatureDSPThumb2 -> FeatureDSP, hasThumb2DSP() -> hasDSP(), etc.
The spelling of "t2dsp" is preserved, pending a further investigation of its
possible external usage.
Differential Revision: http://reviews.llvm.org/D12937
llvm-svn: 248519
Because mod is always exact, this function should have never taken a rounding mode argument. The actual implementation still has issues, which I'll look at resolving in a subsequent patch.
llvm-svn: 248195
Currently, the availability of DSP instructions (ACLE 6.4.7) is handled in a
hand-rolled tricky condition block in tools/clang/lib/Basic/Targets.cpp, with
a FIXME: attached.
This patch changes the handling of +t2dsp to be in line with other
architecture extensions.
Following review comments, also updating the description of FeatureDSPThumb2
in ARM.td.
Differential Revision: http://reviews.llvm.org/D12937
llvm-svn: 248152
The change was accidentally undone by r245290.
Original log message:
When calling DisplayGraph and a PS viewer is chosen, two programs are executed: The GraphViz generator and the PostScript viewer. Always wait for the generator to finish to ensure that the .ps file is written before opening the viewer for that file. DisplayGraph's wait parameter refers to whether to wait until the user closes the viewer.
This happened on Windows and if none of the options to open the .dot file directly applies, also on Linux.
Differential Revision: http://reviews.llvm.org/D11876
llvm-svn: 247980
Summary:
This is the first patch in the series to migrate Triple's (which are ambiguous)
to TargetTuple's (which aren't).
For the moment, TargetTuple simply passes all requests to the Triple object it
holds. Once it has replaced Triple, it will start to implement the interface in
a more suitable way.
This change makes some changes to the public C++ API. In particular,
InitMCSubtargetInfo(), createMCRelocationInfo(), and createMCSymbolizer()
now take TargetTuples instead of Triples. The other public C++ API's have
been left as-is for the moment to reduce patch size.
This commit also contains a trivial patch to clang to account for the C++ API
change. Thanks go to Pavel Labath for fixing LLDB for me.
Reviewers: rengolin
Subscribers: jyknight, dschuff, arsenm, rampitec, danalbert, srhines, javed.absar, dsanders, echristo, emaste, jholewinski, tberghammer, ted, jfb, llvm-commits, rengolin
Differential Revision: http://reviews.llvm.org/D10969
llvm-svn: 247692
Summary:
This is the first patch in the series to migrate Triple's (which are ambiguous)
to TargetTuple's (which aren't).
For the moment, TargetTuple simply passes all requests to the Triple object it
holds. Once it has replaced Triple, it will start to implement the interface in
a more suitable way.
This change makes some changes to the public C++ API. In particular,
InitMCSubtargetInfo(), createMCRelocationInfo(), and createMCSymbolizer()
now take TargetTuples instead of Triples. The other public C++ API's have
been left as-is for the moment to reduce patch size.
This commit also contains a trivial patch to clang to account for the C++ API
change.
Reviewers: rengolin
Subscribers: jyknight, dschuff, arsenm, rampitec, danalbert, srhines, javed.absar, dsanders, echristo, emaste, jholewinski, tberghammer, ted, jfb, llvm-commits, rengolin
Differential Revision: http://reviews.llvm.org/D10969
llvm-svn: 247683
Source code was assuming that llvm-config.h would be included somehow but
up to r247253 that added #include "llvm/Support/Compiler.h" to StringRef.h
the config file was not actually included. The inclusion of llvm-config.h
caused a change of behaviour in tools/clang/test/Frontend/source-col-map.c:
previously it would output the original UTF-8 but now it outputs <U+03B1>.
llvm-svn: 247409
When the driver tries to locate a program by its name, e.g. a linker, it
scans the paths provided by the toolchain using the ScanDirForExecutable
function. If the lookup fails, the driver uses
llvm::sys::findProgramByName. Unlike llvm::sys::findProgramByName,
ScanDirForExecutable is not aware of file extensions. If the program has
the "exe" extension in its name, which is very common on Windows,
ScanDirForExecutable won't find it under the toolchain-provided paths.
This patch changes the Windows version of the "`can_execute`" function
called by ScanDirForExecutable to respect file extensions, similarly to
llvm::sys::findProgramByName.
Patch by Oleg Ranevskyy
Reviewers: rnk
Differential Revision: http://reviews.llvm.org/D12711
llvm-svn: 247358
and tremendously less reliant on the optimizer to fix things.
The code is always necessarily looking for the entire length of the
string when doing the equality tests in this find implementation, but it
previously was needlessly re-checking the size each time among other
annoyances.
By writing this so simply an ddirectly in terms of memcmp, it also is
about 8x faster in a debug build, which in turn makes FileCheck about 2x
faster in 'ninja check-llvm'. This saves about 8% of the time for
FileCheck-heavy parts of the test suite like the x86 backend tests.
llvm-svn: 247269
re-using the resulting components rather than repeatedly splitting and
re-splitting to compute each component as part of the initializer list.
This is more work on PR23676. Sadly, it doesn't help much. It removes
the constructor from my profile, but doesn't make a sufficient dent in
the total time. But it should play together nicely with subsequent
changes.
llvm-svn: 247250
with the StringRef::split method when used with a MaxSplit argument
other than '-1' (which nobody really does today, but which should
actually work).
The spec claimed both to split up to MaxSplit times, but also to append
<= MaxSplit strings to the vector. One of these doesn't make sense.
Given the name "MaxSplit", let's go with it being a max over how many
*splits* occur, which means the max on how many strings get appended is
MaxSplit+1. I'm not actually sure the implementation correctly provided
this logic either, as it used a really opaque loop structure.
The implementation was also playing weird games with nullptr in the data
field to try to rely on a totally opaque hidden property of the split
method that returns a pair. Nasty IMO.
Replace all of this with what is (IMO) simpler code that doesn't use the
pair returning split method, and instead just finds each separator and
appends directly. I think this is a lot easier to read, and it most
definitely matches the spec. Added some tests that exercise the corner
cases around StringRef() and StringRef("") that all now pass.
I'll start using this in code in the next commit.
llvm-svn: 247249
on StringRef. Finding and splitting on a single character is
substantially faster than doing it on even a single character StringRef
-- we immediately get to a *very* tuned memchr call this way.
Even nicer, we get to this even in a debug build, shaving 18% off the
runtime of TripleTest.Normalization, helping PR23676 some more.
llvm-svn: 247244
COFF sections are accompanied with an auxiliary symbol which includes a
checksum. This checksum used to be filled with just zero but this seems
to upset LINK.exe when it is processing a /INCREMENTAL link job.
Instead, fill the CheckSum field with the JamCRC of the section
contents. This matches MSVC's behavior.
This fixes PR19666.
N.B. A rather simple implementation of JamCRC is given. It implements
a byte-wise calculation using the method given by Sarwate. There are
implementations with higher throughput like slice-by-eight and making
use of PCLMULQDQ. We can switch to one of those techniques if it turns
out to be a significant use of time.
llvm-svn: 246590
architecture string is something quite weird. Similarly delay calling
the BPF parsing code, although that is more reasonable.
To understand why I was motivated to make this change, it cuts the time
for running the ADT TripleTest unittests by a factor of two in
non-optimized builds (the developer default) and reduces my 'check-llvm'
time by a full 15 seconds. The implementation of parseARMArch is *that*
slow. I tried to fix it in the prior series of commits, but frankly,
I have no idea how to finish fixing it. The entire premise of the
function (to allow 'v7a-unknown-linux' or some such to parse as an
'arm-unknown-linux' triple) seems completely insane to me, but I'll let
the ARM folks sort that out. At least it is now out of the critical path
of every developer working on LLVM. It also will likely make some other
folks' code significantly faster as I've heard reports of 2% of time
spent in triple parsing even in optimized builds!
I'm not done making this code faster, but I am done trying to improve
the ARM target parsing code.
llvm-svn: 246378
of its strings when expanding the string literals from the macros, and
push all of the APIs to be StringRef instead of C-string APIs.
This (remarkably) removes a very non-trivial number of strlen calls. It
even deletes code and complexity from one of the primary users -- Clang.
llvm-svn: 246374
the necessary tables.
This will allow me to restructure the code and structures using this to
be significantly more efficient. It also removes the duplication of the
list of several enumerators. It also enshrines that the order of
enumerators match the order of the entries in the tables, something the
implementation code actually uses.
No functionality changed (yet).
llvm-svn: 246370
parsing logic prior to making substantial changes to it.
This parsing logic is incredibly wasteful, so I'm planning to rewrite
it. Just unittesting the triple parsing logic spends well over 80% of
its time in the ARM parsing logic, and others have measured significant
time spent here in real production compiles.
Stay tuned...
llvm-svn: 246369
Summary: Adds accessor functions for all the fields in llvm::fltSemantics. This will be used in MergeFunctions to order two APFloats with different semanatics.
Author: jrkoenig
Reviewers: jfb
Subscribers: dschuff, llvm-commits
Differential revision: http://reviews.llvm.org/D12253
llvm-svn: 245999
Remove support for Valgrind-based TSan, which hasn't been maintained for a
few years. We now use the TSan annotations only if LLVM is compiled with
-fsanitize=thread. We no longer need the weak function definitions as we
are guaranteed that our program is linked directly with the TSan runtime.
Differential Revision: http://reviews.llvm.org/D12121
llvm-svn: 245374
Summary: Windows system rarely have good PostScript viewers installed, but PDF viewers are common. So for viewing graphs, generate PDF files and open with the associated PDF viewer using cmd.exe's start command.
Reviewers: Bigcheese, aaron.ballman
Subscribers: aaron.ballman, JakeVanAdrighem, dwiberg, llvm-commits
Differential Revision: http://reviews.llvm.org/D11877
llvm-svn: 245290
Summary:
When calling DisplayGraph and a PS viewer is chosen, two programs are executed: The GraphViz generator and the PostScript viewer. Always for the generator to finish to ensure that the .ps file is written before opening the viewer for that file. DisplayGraph's wait parameter refers to whether to wait until the user closes the viewer.
This happened on Windows and if none of the options to open the .dot file directly applies, also on Linux.
Reviewers: Bigcheese, chandlerc, aaron.ballman
Subscribers: dwiberg, aaron.ballman, llvm-commits
Differential Revision: http://reviews.llvm.org/D11876
llvm-svn: 245289
WebAssembly doesn't yet have a specified binary format, and it may not
end up being ELF, so we don't want the Triple class defaulting to ELF
for it at this time.
llvm-svn: 245254
The arch prefix string isn't currently being used for anything on
WebAssembly, but if it were to be used, it makes sense to use the
same arch prefix string for wasm32 and wasm64.
llvm-svn: 245252
This is a very minimal move support - it leaves the moved-from object in
a zombie state that is only valid for destruction and move assignment.
This seems fine to me, and leaving it in the default constructed state
would require adding more state to the object and potentially allocating
memory (!!!) and so seems like a Bad Idea.
llvm-svn: 245192
Although targeting CoreCLR is similar to targeting MSVC, there are
certain important differences that the backend must be aware of
(e.g. differences in stack probes, EH, and library calls).
Differential Revision: http://reviews.llvm.org/D11012
llvm-svn: 245115
This patch makes the Darwin ARM backend take advantage of TargetParser. It
also teaches TargetParser about ARMV7K for the first time. This makes target
triple parsing more consistent across llvm.
Differential Revision: http://reviews.llvm.org/D11996
llvm-svn: 245081
This is faster and avoids the stream and SmallString state synchronization issue.
resync() is a no-op and may be safely deleted. I'll do so in a follow-up commit.
Reviewed by Rafael Espindola.
llvm-svn: 244870
PrettyStackTraceHead is a LLVM_THREAD_LOCAL, which means it's just a global
in LLVM_ENABLE_THREADS=NO builds. If a CrashRecoveryContext is used with
code that uses PrettyStackEntries, and a crash happens, PrettyStackTraceHead is
currently not reset to its pre-crash value. These functions make it possible
to add a cleanup to such code that does this.
(Not reseting the value then causes the assert in ~PrettyStackTraceEntry() to
fire if the code outside of the CrashRecoveryContext also uses
PrettyStackEntries -- for example, clang when building a module.)
Part of PR11974.
llvm-svn: 244338
libclang uses a CrashRecoveryContext, and building a module does too. If a
module gets built through libclang, nested CrashRecoveryContexts are used. They
work fine with threads as things are stored in ThreadLocal variables, but in
LLVM_ENABLE_THREADS=OFF builds the two recovery contexts would write to the
same globals.
To fix, keep active CrashRecoveryContextImpls in a list and have the global
point to the innermost one, and do something similar for
tlIsRecoveringFromCrash.
Necessary (but not sufficient) for PR11974 and PR20325
http://reviews.llvm.org/D11770
llvm-svn: 244251
If we don't have sys/wait.h and we're on a unix system there's no way
that several of the llvm tools work at all. This includes clang.
Just remove the configure and cmake checks entirely - we'll get a
build error instead of building something broken now.
llvm-svn: 243957
While theoratically required in pre-C++11 to avoid re-allocation upon call,
C++11 guarantees that c_str() returns a pointer to the internal array so
pre-calling c_str() is no longer required.
llvm-svn: 242983
And expose it in Signals.h, allowing clients to call it directly,
possibly LLVMErrorHandler which currently calls RunInterruptHandlers
but not RunSignalHandlers, thus for example not printing the stack
backtrace on Unixish OSes. On Windows it does happen because
RunInterruptHandlers ends up calling the callbacks as well via
Cleanup(). This difference in behaviour and code structures in
*/Signals.inc should be patched in the future.
llvm-svn: 242936
Move CallBacksToRun into the common Signals.cpp, create RunCallBacksToRun()
and use these in both Unix/Signals.inc and Windows/Signals.inc.
Lots of potential code to be merged here.
llvm-svn: 242925
- Changed the default FPU of cortex-m4.
- Removed "cortex-m4f" entry. Currently not supported.
Change-Id: I73121e358aa9e7ba68eb001c2143df390ff2352a
Phabricator: http://reviews.llvm.org/D11100
llvm-svn: 242528
- ARM V7L matches the 'A' profile of ARM architecture.
Change-Id: I80c8b973f5c93fb040c177a227644d56b1b83ea8
Phabricator: http://reviews.llvm.org/D11261
llvm-svn: 242406
Revert "-Added API for retrieving the default FPU of a CPU from TargetParser."
This reverts commit 01199ab0c6ff2d5c4f6b2c05a95ec011e41c4669.
llvm-svn: 242147
The newly added function returns the size of the specified floating
point semantics in bits.
Differential revision: http://reviews.llvm.org/D8413
llvm-svn: 241793
This patch changes linkage with dbghlp.dll for clang from static (at load time)
to on demand (at the first use of required functions). Clang uses dbghlp.dll
only in minor use-cases. First of all in case of crash and in case of plugin load.
The dbghlp.dll library can be absent on system. In this case clang will fail
to load. With lazy load of dbghlp.dll clang can work even if dbghlp.dll
is not available.
Differential Revision: http://reviews.llvm.org/D10737
llvm-svn: 241271
By default, the GraphWriter code assumes that the generic file open
program (`open` on Apple, `xdg-open` on other systems) can wait on the
forked proces to complete. When the fork ends, the code would delete
the temporary dot files created, and return.
On GNU/Linux, the xdg-open program does not have a "wait for your fork
to complete before dying" option. So the behaviour was that xdg-open
would launch a process, quickly die itself, and then the GraphWriter
code would think its OK to quickly delete all the temporary files.
Once the temporary files were deleted, the dot viewers would get very
upset, and often give you weird errors.
This change only waits on the generic open program on Apple platforms.
Elsewhere, we don't wait on the process, and hence we don't try and
clean up the temporary files.
llvm-svn: 241250
This unbreaks TripleTest.Normalization. We'll have to come up with a new
plan for the OS component of the target triple for WebAssembly.
llvm-svn: 241041
Reapplies r241005 after fixing the build on non-Mac platforms. Original
commit message below.
The hostname can be very unstable when there are many machines on the
network competing for the same name. Using the hardware UUID makes it
less likely to have collisions or to consider files written by the
current host to be owned by a different one at a later time.
rdar://problem/21512307
llvm-svn: 241012
The hostname can be very unstable when there are many machines on the
network competing for the same name. Using the hardware UUID makes it
less likely to have collisions or to consider files written by the
current host to be owned by a different one at a later time.
rdar://problem/21512307
llvm-svn: 241005
Make sure to remove the unique lock file, which is what the .lock
symlink points to, if there is a signal while the lock is held. This
will release the lock, since the symlink will point to nothing (already
tested in unit tests). For good measure, also clean up the unique lock
file if there is an error or signal before the lock is acquired.
I will add a clang test.
rdar://problem/21512307
llvm-svn: 240967
removing default label in switch as it results.
This is part of earlier commit http://reviews.llvm.org/D1064
Subscribers: llvm-commits
llvm-svn: 240932
Some of the the permissible ARM -mfpu options, which are supported in GCC,
are currently not present in llvm/clang.This patch adds the options:
'neon-fp16', 'vfpv3-fp16', 'vfpv3-d16-fp16', 'vfpv3xd' and 'vfpv3xd-fp16.
These are related to half-precision floating-point and single precision.
Reviewers: rengolin, ranjeet.singh
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D10645
llvm-svn: 240930
This commit moves the APSInt initialization code that's used by
the LLLexer class into a new APSInt constructor that constructs
APSInts from strings.
This change is useful for MIR Serialization, as it would allow
the MILexer class to use the same APSInt initialization as
LLexer when parsing immediate machine operands.
llvm-svn: 240436
Kristof Beyls