Summary:
This patch adds a LLVM_ENABLE_GISEL_COV which, like LLVM_ENABLE_DAGISEL_COV,
causes TableGen to instrument the generated table to collect rule coverage
information. However, LLVM_ENABLE_GISEL_COV goes a bit further than
LLVM_ENABLE_DAGISEL_COV. The information is written to files
(${CMAKE_BINARY_DIR}/gisel-coverage-* by default). These files can then be
concatenated into ${LLVM_GISEL_COV_PREFIX}-all after which TableGen will
read this information and use it to emit warnings about untested rules.
This technique could also be used by SelectionDAG and can be further
extended to detect hot rules and give them priority over colder rules.
Usage:
* Enable LLVM_ENABLE_GISEL_COV in CMake
* Build the compiler and run some tests
* cat gisel-coverage-[0-9]* > gisel-coverage-all
* Delete lib/Target/*/*GenGlobalISel.inc*
* Build the compiler
Known issues:
* ${LLVM_GISEL_COV_PREFIX}-all must be generated as a manual
step due to a lack of a portable 'cat' command. It should be the
concatenation of all ${LLVM_GISEL_COV_PREFIX}-[0-9]* files.
* There's no mechanism to discard coverage information when the ruleset
changes
Depends on D39742
Reviewers: ab, qcolombet, t.p.northover, aditya_nandakumar, rovka
Reviewed By: rovka
Subscribers: vsk, arsenm, nhaehnle, mgorny, kristof.beyls, javed.absar, igorb, llvm-commits
Differential Revision: https://reviews.llvm.org/D39747
llvm-svn: 318356
Summary:
Make it possible to feed runtime information back to tablegen to enable
profile-guided tablegen-eration, detection of untested tablegen definitions, etc.
Being a cross-compiler by nature, LLVM will potentially collect data for multiple
architectures (e.g. when running 'ninja check'). We therefore need a way for
TableGen to figure out what data applies to the backend it is generating at the
time. This patch achieves that by including the name of the 'def X : Target ...'
for the backend in the TargetRegistry.
Reviewers: qcolombet
Reviewed By: qcolombet
Subscribers: jholewinski, arsenm, jyknight, aditya_nandakumar, sdardis, nemanjai, ab, nhaehnle, t.p.northover, javed.absar, qcolombet, llvm-commits, fedor.sergeev
Differential Revision: https://reviews.llvm.org/D39742
llvm-svn: 318352
This requires a small change to TempFile: allowing a discard after a
failed keep.
With this the cache now handles signals and reuses a fd instead of
reopening the file.
llvm-svn: 318322
std::error_code can represent success, so we don't need a
Optional<std::error_code>.
Rename the variable to avoid confusion with the type Error.
llvm-svn: 318111
This just adds a TempFile class and replaces the use in
FileOutputBuffer with it.
The only difference for now is better error handling. Followup work includes:
- Convert other user of temporary files to it.
- Add support for automatically deleting on windows.
- Add a createUnnamed method that returns a potentially unnamed
file. It would be actually unnamed on modern linux and have a
unknown name on windows.
llvm-svn: 318069
Summary:
I want to leverage this to clean up some of the code in clang. This will allow us to simplify D39521 which was trying to do some of the same.
If we accurately keep the code in Host.cpp synced with new CPUs added to compile-rt/libgcc we should be able to use this file as a proxy for what's implemented in the libraries.
The entries for the CPUs recognized by the libraries use separate macros that define additional parameters like the name for __builtin_cpu_is and an alias string for the couple cases where __builtin_cpu_is accepts two different names.
All of the macros contain an ARCHNAME that is usually the same as the __builtin_cpu_is string, but sometimes isn't. This represents the name recognized by X86.td and -march.
I'm following the precedent set by ARM and AArch64 and adding this information to lib/Support/TargetParser.cpp
Reviewers: erichkeane, echristo, asbirlea
Reviewed By: echristo
Subscribers: llvm-commits, aemerson, kristof.beyls
Differential Revision: https://reviews.llvm.org/D39782
llvm-svn: 317900
Summary:
zturner suggested that mapped_file_region::init() on Windows seems to
create mappings that are larger than they need to be: Offset+Size
instead of Size. Indeed, that appears to be the case. I confirmed that
tests pass with mappings of just Size bytes, and fail with Size-1
bytes, suggesting that Size is indeed the correct value.
Reviewers: amccarth, zturner
Reviewed By: zturner
Subscribers: hiraditya, llvm-commits
Differential Revision: https://reviews.llvm.org/D39876
llvm-svn: 317850
Whenever LLVM_ENABLE_ABI_BREAKING_CHECKS is enabled, which
is usually the case for example when asserts are enabled,
Error's destructor does some additional checking to make sure
that that it does not represent an error condition and that it
was checked.
However, this is -- by definition -- not the likely codepath.
Some profiling shows that at least with some compilers, simply
calling assertIsChecked -- in a release build with full
optimizations -- can account for up to 15% of the entire
runtime of the program, even though this function should almost
literally be a no-op.
The problem is that the assertIsChecked function can be considered
too big to inline depending on the compiler's inliner. Since it's
unlikely to ever need to failure path though, we can move it out
of line and force it to not be inlined, so that the fast path
can be inlined.
In my test (using lld to link clang with CMAKE_BUILD_TYPE=Release
and LLVM_ENABLE_ASSERTIONS=ON), this reduces link time from 27
seconds to 23.5 seconds, which is a solid 15% gain.
llvm-svn: 317824
InMemoryBuffer and OnDiskBuffer classes have both factory methods and
public constructors, and that looks a bit odd. This patch makes factory
methods non-member function to fix it.
Differential Revision: https://reviews.llvm.org/D39693
llvm-svn: 317739
Summary:
Extends SCL functionality to allow users to find the line number in the file the SCL is built from through SpecialCaseList::inSectionBlame(...).
Also removes the need to compile the SCL before use. As the matcher now contains a list of regexes to test against instead of a single regex, the regexes can be individually built on each insertion rather than one large compilation at the end of construction.
This change also fixes a bug where blank lines would cause the parser to become out-of-sync with the line number. An error on line `k` was being reported as being on line `k - num_blank_lines_before_k`.
Note: This change has a cyclical dependency on D39486. Both these changes must be submitted at the same time to avoid a build breakage.
Reviewers: vlad.tsyrklevich
Reviewed By: vlad.tsyrklevich
Subscribers: kcc, pcc, llvm-commits
Differential Revision: https://reviews.llvm.org/D39485
llvm-svn: 317617
This changes the interface of how targets describe how to legalize, see
the below description.
1. Interface for targets to describe how to legalize.
In GlobalISel, the API in the LegalizerInfo class is the main interface
for targets to specify which types are legal for which operations, and
what to do to turn illegal type/operation combinations into legal ones.
For each operation the type sizes that can be legalized without having
to change the size of the type are specified with a call to setAction.
This isn't different to how GlobalISel worked before. For example, for a
target that supports 32 and 64 bit adds natively:
for (auto Ty : {s32, s64})
setAction({G_ADD, 0, s32}, Legal);
or for a target that needs a library call for a 32 bit division:
setAction({G_SDIV, s32}, Libcall);
The main conceptual change to the LegalizerInfo API, is in specifying
how to legalize the type sizes for which a change of size is needed. For
example, in the above example, how to specify how all types from i1 to
i8388607 (apart from s32 and s64 which are legal) need to be legalized
and expressed in terms of operations on the available legal sizes
(again, i32 and i64 in this case). Before, the implementation only
allowed specifying power-of-2-sized types (e.g. setAction({G_ADD, 0,
s128}, NarrowScalar). A worse limitation was that if you'd wanted to
specify how to legalize all the sized types as allowed by the LLVM-IR
LangRef, i1 to i8388607, you'd have to call setAction 8388607-3 times
and probably would need a lot of memory to store all of these
specifications.
Instead, the legalization actions that need to change the size of the
type are specified now using a "SizeChangeStrategy". For example:
setLegalizeScalarToDifferentSizeStrategy(
G_ADD, 0, widenToLargerAndNarrowToLargest);
This example indicates that for type sizes for which there is a larger
size that can be legalized towards, do it by Widening the size.
For example, G_ADD on s17 will be legalized by first doing WidenScalar
to make it s32, after which it's legal.
The "NarrowToLargest" indicates what to do if there is no larger size
that can be legalized towards. E.g. G_ADD on s92 will be legalized by
doing NarrowScalar to s64.
Another example, taken from the ARM backend is:
for (unsigned Op : {G_SDIV, G_UDIV}) {
setLegalizeScalarToDifferentSizeStrategy(Op, 0,
widenToLargerTypesUnsupportedOtherwise);
if (ST.hasDivideInARMMode())
setAction({Op, s32}, Legal);
else
setAction({Op, s32}, Libcall);
}
For this example, G_SDIV on s8, on a target without a divide
instruction, would be legalized by first doing action (WidenScalar,
s32), followed by (Libcall, s32).
The same principle is also followed for when the number of vector lanes
on vector data types need to be changed, e.g.:
setAction({G_ADD, LLT::vector(8, 8)}, LegalizerInfo::Legal);
setAction({G_ADD, LLT::vector(16, 8)}, LegalizerInfo::Legal);
setAction({G_ADD, LLT::vector(4, 16)}, LegalizerInfo::Legal);
setAction({G_ADD, LLT::vector(8, 16)}, LegalizerInfo::Legal);
setAction({G_ADD, LLT::vector(2, 32)}, LegalizerInfo::Legal);
setAction({G_ADD, LLT::vector(4, 32)}, LegalizerInfo::Legal);
setLegalizeVectorElementToDifferentSizeStrategy(
G_ADD, 0, widenToLargerTypesUnsupportedOtherwise);
As currently implemented here, vector types are legalized by first
making the vector element size legal, followed by then making the number
of lanes legal. The strategy to follow in the first step is set by a
call to setLegalizeVectorElementToDifferentSizeStrategy, see example
above. The strategy followed in the second step
"moreToWiderTypesAndLessToWidest" (see code for its definition),
indicating that vectors are widened to more elements so they map to
natively supported vector widths, or when there isn't a legal wider
vector, split the vector to map it to the widest vector supported.
Therefore, for the above specification, some example legalizations are:
* getAction({G_ADD, LLT::vector(3, 3)})
returns {WidenScalar, LLT::vector(3, 8)}
* getAction({G_ADD, LLT::vector(3, 8)})
then returns {MoreElements, LLT::vector(8, 8)}
* getAction({G_ADD, LLT::vector(20, 8)})
returns {FewerElements, LLT::vector(16, 8)}
2. Key implementation aspects.
How to legalize a specific (operation, type index, size) tuple is
represented by mapping intervals of integers representing a range of
size types to an action to take, e.g.:
setScalarAction({G_ADD, LLT:scalar(1)},
{{1, WidenScalar}, // bit sizes [ 1, 31[
{32, Legal}, // bit sizes [32, 33[
{33, WidenScalar}, // bit sizes [33, 64[
{64, Legal}, // bit sizes [64, 65[
{65, NarrowScalar} // bit sizes [65, +inf[
});
Please note that most of the code to do the actual lowering of
non-power-of-2 sized types is currently missing, this is just trying to
make it possible for targets to specify what is legal, and how non-legal
types should be legalized. Probably quite a bit of further work is
needed in the actual legalizing and the other passes in GlobalISel to
support non-power-of-2 sized types.
I hope the documentation in LegalizerInfo.h and the examples provided in the
various {Target}LegalizerInfo.cpp and LegalizerInfoTest.cpp explains well
enough how this is meant to be used.
This drops the need for LLT::{half,double}...Size().
Differential Revision: https://reviews.llvm.org/D30529
llvm-svn: 317560
According to the docs on opegroup.org, the function can return
EINVAL if:
The len argument is less than zero, or the offset argument is less
than zero, or the underlying file system does not support this
operation.
I'd say it's a peculiar choice (when EONOTSUPP is right there), but
let's keep POSIX happy for now. This was independently discovered
by Mark Millard (on FreeBSD/ZFS).
Quickly ack'ed by Rui on IRC.
llvm-svn: 317535
rL316419 exposed a platform specific issue where the type of the values
passed to llvm::format could be different to the format string.
Debian unstable for mips uses long long int for std::chrono:duration,
while x86_64 uses long int.
For mips, this resulted in the value being corrupted when rendered to a
string. Address this by explicitly casting the result of the duration_cast
to the type specified in the format string.
Reviewers: sammccall
Differential Revision: https://reviews.llvm.org/D39597
llvm-svn: 317523
This removes the athlon type and simplifies the string decoding. We only really need these type/subtype breaks where we need to match libgcc/compiler-rt and these CPUs aren't part of that.
I'm looking into moving some of this information to a .def file to share with clang's __builtin_cpu_is handling. And while these CPUs aren't part of that the less lines I have to deal with in the .def file the better.
llvm-svn: 317354
'x86-64' has started to reflect a sort of generic tuning flag for more modern 64-bit CPUs. We probably shouldn't be using it as the name of an unidentifiable pentium4. So use nocona for all 64-bit pentium4s instead.
llvm-svn: 317230
We know that's the earliest CPU with 64-bit support. x86-64 has taken on a role of representing a more modern 64-bit CPU so we probably shouldn't be using that when we can't identify things.
llvm-svn: 317229
Rather than looking at model numbers just check for the mmx feature flag. While there promote INTEL_PENTIUM_MMX to a CPU type instead of a subtype so that we don't have weird type with only one subtype.
llvm-svn: 317184
This patch is to rewrite FileOutputBuffer as two separate classes;
one for file-backed output buffer and the other for memory-backed
output buffer. I think the new code is easier to follow because two
different implementations are now actually separated as different
classes.
Unlike the previous implementation, the class that does not replace the
final output file using rename(2) does not create a temporary file at
all. Instead, it allocates memory using mmap(2) and use it. I think
this is an improvement because it is now guaranteed that the temporary
memory region doesn't trigger any I/O and there's now zero chance to
leave a temporary file behind. Also, it shouldn't impose new restrictions
because were using mmap IO too.
Differential Revision: https://reviews.llvm.org/D39449
llvm-svn: 317127
fmod specification requires the sign of the remainder is
the same as numerator in case remainder is zero.
Reviewers: gottesmm, scanon, arsenm, davide, craig.topper
Reviewed By: scanon
Subscribers: wdng, llvm-commits
Differential Revision: https://reviews.llvm.org/D39225
llvm-svn: 317081
Previously, we call write(2) for each 32767 byte chunk. That is not
efficient because Linux can handle much larger write requests.
This patch changes the chunk size on Linux to 1 GiB.
This patch also changes the default chunks size to SSIZE_MAX. I think
that doesn't in practice change this function's behavior on any operating
system because SSIZE_MAX on 64-bit machine is unrealistically large,
and writing 2 GiB (SSIZE_MAX on 32-bit) on a 32-bit machine by a single
call of write(2) is also unrealistic, as the userspace is usually
limited to 2 GiB. That said, it is in general a good thing to do because
a write larger than SSIZE_MAX is implementation-defined in POSIX.
Differential Revision: https://reviews.llvm.org/D39444
llvm-svn: 317015
Summary:
The removed code checks that we are able to handle a 64-bit number, but
the code we're calling takes two dwords (for a total of 64 bits), so this
is always true.
Reviewers: zturner, rnk, majnemer, compnerd
Reviewed By: zturner
Subscribers: amccarth, hiraditya, lebedev.ri, llvm-commits
Differential Revision: https://reviews.llvm.org/D39263
llvm-svn: 316814
Summary:
Original oss-fuzz report:
https://bugs.chromium.org/p/oss-fuzz/issues/detail?id=3727#c2
The minimized test case that causes this failure:
5b 5b 5b 3d 47 53 00 5b 3d 5d 5b 5d 0a [[[=GS.[=][].
Note the string "=GS\x00". The failure happens because the code is
searching the string against an array of known collated names. "GS\x00"
is a hit, but since len takes into account an extra NUL byte, indexing
into cp->name[len] goes one byte past it's allocated memory. Fix this to
use a strlen(cp->name) comparison to account for NUL bytes in the input.
Reviewers: pcc
Reviewed By: pcc
Subscribers: hctim, kcc
Differential Revision: https://reviews.llvm.org/D39380
llvm-svn: 316786
These headers have static variables in them, which would easily create
ODR violations if the header was included in another header, and the
constants were used by an inline function, for example.
llvm-svn: 316706
Summary:
On musl libc, stdin/out/err are defined as `FILE* const` globals,
and their address is not implicitly convertible to void *,
or at least gcc 6 doesn't allow it, giving errors like:
```
error: cannot initialize return object of type 'void *' with an rvalue of type 'FILE *const *' (aka '_IO_FILE *const *')
EXPLICIT_SYMBOL(stderr);
^~~~~~~~~~~~~~~~~~~~~~~
```
Add an explicit cast to fix that problem.
Reviewers: marsupial, krytarowski, dim
Reviewed By: dim
Differential Revision: https://reviews.llvm.org/D39297
llvm-svn: 316672
Summary:
Support formatv of TimePoint with strftime-style formats.
Extensions for millis/micros/nanos are added.
Inital use case is HH:MM:SS.MMM timestamps in clangd logs.
Reviewers: bkramer, ilya-biryukov
Subscribers: labath, llvm-commits
Differential Revision: https://reviews.llvm.org/D38992
llvm-svn: 316419
Summary:
Previously, we would emit error messages like "IO failure on output
stream". This change causes use to include information about what
actually went wrong, e.g. "No space left on device".
Reviewers: sunfish, rnk
Reviewed By: rnk
Subscribers: mehdi_amini, llvm-commits, hiraditya
Differential Revision: https://reviews.llvm.org/D39203
llvm-svn: 316404
Apple's iOS, tvOS and watchOS simulator platforms have never been clearly
distinguished in the target triples. Even though they are intended to
behave similarly to the corresponding device platforms, they have separate
SDKs and are really separate platforms from the compiler's perspective.
Clang now defines a macro when building for one of these simulator platforms
(r297866) but that relies on the very indirect mechanism of checking to see
which option was used to specify the minimum deployment target. That is not
so great. Swift would also like to distinguish these simulator platforms in
a similar way, but unlike Clang, Swift does not use a separate option to
specify the minimum deployment target -- it uses a -target option to
specify the target triple directly, including the OS version number.
Using a different target triple for the simulator platforms is a much
more direct and obvious way to specify this. Putting the "simulator" in
the environment component of the triple means the OS values can stay the
same and existing code the looks at the OS field will not be affected.
https://reviews.llvm.org/D39143
rdar://problem/34729432
llvm-svn: 316380
The method IEEEFloat::convertFromStringSpecials() does not recognize
the "+Inf" and "-Inf" strings but these strings are printed for
the double Infinities by the IEEEFloat::toString().
This patch adds the "+Inf" and "-Inf" strings to the list of recognized
patterns in IEEEFloat::convertFromStringSpecials().
Reviewers: sberg, bogner, majnemer, timshen, rnk, skatkov, gottesmm, bkramer, scanon
Reviewed By: skatkov
Subscribers: apilipenko, reames, llvm-commits
Differential Revision: https://reviews.llvm.org/D38030
llvm-svn: 316156
Original commit message:
"[cmake] Use find_package to discover zlib
This allows us to use standard cmake utilities to point to non-system zlib
locations.
Patch by Oksana Shadura and me (D39002)."
The new patch brings back the old behavior in the cases where find_package
cannot find zlib.
llvm-svn: 316150
This adds Intel's Knights Mill CPU to valid CPU names for the backend. For now its an alias of "knl", but ultimately we need to support AVX5124FMAPS and AVX5124VNNIW instruction sets for it.
Differential Revision: https://reviews.llvm.org/D38811
llvm-svn: 315722
In r315079 I added a check for the ERROR_CALL_NOT_IMPLEMENTED error
code, but it turns out earlier versions of Wine just returned false
without setting any error code.
This patch handles the unset error code case.
llvm-svn: 315597
Summary:
Add LLVM_FORCE_ENABLE_DUMP cmake option, and use it along with
LLVM_ENABLE_ASSERTIONS to set LLVM_ENABLE_DUMP.
Remove NDEBUG and only use LLVM_ENABLE_DUMP to enable dump methods.
Move definition of LLVM_ENABLE_DUMP from config.h to llvm-config.h so
it'll be picked up by public headers.
Differential Revision: https://reviews.llvm.org/D38406
llvm-svn: 315590
This reverts commit 4e4ee1c507e2707bb3c208e1e1b6551c3015cbf5.
This is failing due to some code that isn't built on MSVC
so I didn't catch. Not immediately obvious how to fix this
at first glance, so I'm reverting for now.
llvm-svn: 315536
There's a lot of misuse of Twine scattered around LLVM. This
ranges in severity from benign (returning a Twine from a function
by value that is just a string literal) to pretty sketchy (storing
a Twine by value in a class). While there are some uses for
copying Twines, most of the very compelling ones are confined
to the Twine class implementation itself, and other uses are
either dubious or easily worked around.
This patch makes Twine's copy constructor private, and fixes up
all callsites.
Differential Revision: https://reviews.llvm.org/D38767
llvm-svn: 315530
- Use HSA metadata streamer directly from AMDGPUAsmPrinter
- Make naming consistent with PAL metadata
Differential Revision: https://reviews.llvm.org/D38746
llvm-svn: 315526
- Move PAL metadata definitions to AMDGPUMetadata
- Make naming consistent with HSA metadata
Differential Revision: https://reviews.llvm.org/D38745
llvm-svn: 315523
- Rename AMDGPUCodeObjectMetadata to AMDGPUMetadata (PAL metadata will be included in this file in the follow up change)
- Rename AMDGPUCodeObjectMetadataStreamer to AMDGPUHSAMetadataStreamer
- Introduce HSAMD namespace
- Other minor name changes in function and test names
llvm-svn: 315522
In r315079, fs::rename was reimplemented in terms of CreateFile and
SetFileInformationByHandle. Unfortunately, the latter isn't supported by
Wine. This adds a fallback to MoveFileEx for that case.
Differential Revision: https://reviews.llvm.org/D38817
llvm-svn: 315520
Previously we would only look in the current directory for a
resource, which might not be the same as the directory of the
rc file. Furthermore, MSVC rc supports a /I option, and can
also look in the system environment. This patch adds support
for this search algorithm.
Differential Revision: https://reviews.llvm.org/D38740
llvm-svn: 315499
This allows clients to avoid an unnecessary fs::status() call on each
directory entry. Because the information returned by FindFirstFileEx
is a subset of the information returned by a regular status() call,
I needed to extract a base class from file_status that contains only
that information.
On my machine, this reduces the time required to enumerate a ThinLTO
cache directory containing 520k files from almost 4 minutes to less
than 2 seconds.
Differential Revision: https://reviews.llvm.org/D38716
llvm-svn: 315378
This patch adds a post-linking pass which replaces the function pointer of enqueued
block kernel with a global variable (runtime handle) and adds
runtime-handle attribute to the enqueued block kernel.
In LLVM CodeGen the runtime-handle metadata will be translated to
RuntimeHandle metadata in code object. Runtime allocates a global buffer
for each kernel with RuntimeHandel metadata and saves the kernel address
required for the AQL packet into the buffer. __enqueue_kernel function
in device library knows that the invoke function pointer in the block
literal is actually runtime handle and loads the kernel address from it
and puts it into AQL packet for dispatching.
This cannot be done in FE since FE cannot create a unique global variable
with external linkage across LLVM modules. The global variable with internal
linkage does not work since optimization passes will try to replace loads
of the global variable with its initialization value.
Differential Revision: https://reviews.llvm.org/D38610
llvm-svn: 315352
Microsoft's debug implementation of std::copy checks if the destination is an
array and then does some bounds checking. This was causing an assertion
failure in fs::rename_internal which copies to a buffer of the appropriate
size but that's type-punned to an array of length 1 for API compatibility
reasons.
Fix is to make make the destination a pointer rather than an array.
llvm-svn: 315222
The current implementation of rename uses ReplaceFile if the
destination file already exists. According to the documentation for
ReplaceFile, the source file is opened without a sharing mode. This
means that there is a short interval of time between when ReplaceFile
renames the file and when it closes the file during which the
destination file cannot be opened.
This behaviour is not POSIX compliant because rename is supposed
to be atomic. It was also causing intermittent link failures when
linking with a ThinLTO cache; the ThinLTO cache implementation expects
all cache files to be openable.
This patch addresses that problem by re-implementing rename
using CreateFile and SetFileInformationByHandle. It is roughly a
reimplementation of ReplaceFile with a better sharing policy as well
as support for renaming in the case where the destination file does
not exist.
This implementation is still not fully POSIX. Specifically in the case
where the destination file is open at the point when rename is called,
there will be a short interval of time during which the destination
file will not exist. It isn't clear whether it is possible to avoid
this using the Windows API.
Differential Revision: https://reviews.llvm.org/D38570
llvm-svn: 315079
But now include a check for CPU_COUNT so we still build on 10 year old
versions of glibc.
Original message:
Use sched_getaffinity instead of std:🧵:hardware_concurrency.
The issue with std:🧵:hardware_concurrency is that it forwards
to libc and some implementations (like glibc) don't take thread
affinity into consideration.
With this change a llvm program that can execute in only 2 cores will
use 2 threads, even if the machine has 32 cores.
This makes benchmarking a lot easier, but should also help if someone
doesn't want to use all cores for compilation for example.
llvm-svn: 314931
Summary:
This reverts D38481. The change breaks systems with older versions of glibc. It
injects a use of CPU_COUNT() from sched.h without checking to ensure that the
function exists first.
Reviewers:
Subscribers:
llvm-svn: 314922
The issue with std:🧵:hardware_concurrency is that it forwards
to libc and some implementations (like glibc) don't take thread
affinity into consideration.
With this change a llvm program that can execute in only 2 cores will
use 2 threads, even if the machine has 32 cores.
This makes benchmarking a lot easier, but should also help if someone
doesn't want to use all cores for compilation for example.
llvm-svn: 314809
Summary:
This operating system type represents the AMDGPU PAL runtime, and will
be required by the AMDGPU backend in order to generate correct code for
this runtime.
Currently it generates the same code as not specifying an OS at all.
That will change in future commits.
Patch from Tim Corringham.
Subscribers: arsenm, nhaehnle
Differential Revision: https://reviews.llvm.org/D37380
llvm-svn: 314500
If we do not initialize Prefix here, Prefix.data() returns a nullptr.
Later, it is passed to memcpy. memcpy's behavior is undefined if src (or
dst) is a nullptr even if a given size is 0. That's why this code
triggered UBsan.
llvm-svn: 314368
The tar format originally supported up to 99 byte filename. The two
extensions are proposed later: Ustar or PAX.
In the UStar extension, a pathanme is split at a '/' and its "prefix"
and "suffix" are stored in different locations in the tar header. Since
"prefix" can be up to 155 byte, it can represent up to 254 byte
filename (but exact limit depends on the location of '/' character in
a pathname.)
Our TarWriter first attempt to use UStar extension and then fallback to
PAX extension.
But there's a bug in UStar header creation. "Suffix" part must be a NUL-
terminated string, but we didn't handle it correctly. As a result, if
your filename just 100 characters long, the last character was droppped.
This patch fixes the issue.
Differential Revision: https://reviews.llvm.org/D38149
llvm-svn: 314349
FileOutputBuffer::create() attempts to remove a target file if the file
is a regular one, which results in an unexpected result in a failure
scenario.
If something goes wrong and the user of FileOutputBuffer decides to not
call commit(), it leaves nothing. An existing file is removed, and no
new file is created.
What we should do is to atomically replace an existing file with a new
file using rename(), so that it wouldn't remove an existing file without
creating a new one.
Differential Revision: https://reviews.llvm.org/D38283
llvm-svn: 314345
Summary:
Found when testing stage-2 build with D38101.
```
In file included from /build/llvm/lib/Support/Path.cpp:1045:
/build/llvm/lib/Support/Unix/Path.inc:648:14: error: comparison 'uint64_t' (aka 'unsigned long') > 18446744073709551615 is always false [-Werror,-Wtautological-constant-compare]
if (length > std::numeric_limits<size_t>::max()) {
~~~~~~ ^ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
```
`size_t` is `uint64_t` here, apparently, thus any `uint64_t` value
always fits into `size_t`.
Initial patch was to use some preprocessor logic to
not check if the size is known to fit at compile time.
But Zachary Turner suggested using this approach.
Reviewers: Bigcheese, rafael, zturner, mehdi_amini
Reviewed by (via email): zturner
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D38132
llvm-svn: 314312
Summary:
Sanitizer blacklist entries currently apply to all sanitizers--there
is no way to specify that an entry should only apply to a specific
sanitizer. This is important for Control Flow Integrity since there are
several different CFI modes that can be enabled at once. For maximum
security, CFI blacklist entries should be scoped to only the specific
CFI mode(s) that entry applies to.
Adding section headers to SpecialCaseLists allows users to specify more
information about list entries, like sanitizer names or other metadata,
like so:
[section1]
fun:*fun1*
[section2|section3]
fun:*fun23*
The section headers are regular expressions. For backwards compatbility,
blacklist entries entered before a section header are put into the '[*]'
section so that blacklists without sections retain the same behavior.
SpecialCaseList has been modified to also accept a section name when
matching against the blacklist. It has also been modified so the
follow-up change to clang can define a derived class that allows
matching sections by SectionMask instead of by string.
Reviewers: pcc, kcc, eugenis, vsk
Reviewed By: eugenis, vsk
Subscribers: vitalybuka, llvm-commits
Differential Revision: https://reviews.llvm.org/D37924
llvm-svn: 314170
This returns "cortex-a73" for second-generation Kryo; not precisely
correct, but close enough.
Differential Revision: https://reviews.llvm.org/D37724
llvm-svn: 313200
Summary:
Change the type of the Redirects parameter of llvm::sys::ExecuteAndWait,
ExecuteNoWait and other APIs that wrap them from `const StringRef **` to
`ArrayRef<Optional<StringRef>>`, which is safer and simplifies the use of these
APIs (no more local StringRef variables just to get a pointer to).
Corresponding clang changes will be posted as a separate patch.
Reviewers: bkramer
Reviewed By: bkramer
Subscribers: vsk, llvm-commits
Differential Revision: https://reviews.llvm.org/D37563
llvm-svn: 313155
Most callers were not expecting the exit(0) and trying to exit with a
different value.
This also adds back the call to cl::PrintHelpMessage in llvm-ar.
llvm-svn: 312761
-mcpu=# will support:
. generic: the default insn set
. v1: insn set version 1, the same as generic
. v2: insn set version 2, version 1 + additional jmp insns
. probe: the compiler will probe the underlying kernel to
decide proper version of insn set.
We did not not use -mcpu=native since llc/llvm will interpret -mcpu=native
as the underlying hardware architecture regardless of -march value.
Currently, only x86_64 supports -mcpu=probe. Other architecture will
silently revert to "generic".
Also added -mcpu=help to print available cpu parameters.
llvm will print out the information only if there are at least one
cpu and at least one feature. Add an unused dummy feature to
enable the printout.
Examples for usage:
$ llc -march=bpf -mcpu=v1 -filetype=asm t.ll
$ llc -march=bpf -mcpu=v2 -filetype=asm t.ll
$ llc -march=bpf -mcpu=generic -filetype=asm t.ll
$ llc -march=bpf -mcpu=probe -filetype=asm t.ll
$ llc -march=bpf -mcpu=v3 -filetype=asm t.ll
'v3' is not a recognized processor for this target (ignoring processor)
...
$ llc -march=bpf -mcpu=help -filetype=asm t.ll
Available CPUs for this target:
generic - Select the generic processor.
probe - Select the probe processor.
v1 - Select the v1 processor.
v2 - Select the v2 processor.
Available features for this target:
dummy - unused feature.
Use +feature to enable a feature, or -feature to disable it.
For example, llc -mcpu=mycpu -mattr=+feature1,-feature2
...
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Yonghong Song <yhs@fb.com>
Acked-by: Alexei Starovoitov <ast@kernel.org>
llvm-svn: 311522
Summary:
The function widenPath() for Windows also normalizes long path names by
iterating over the path's components and calling append(). The
assumption during the iteration that separators are not returned by the
iterator doesn't hold because the iterators do return a separator when
the path has a drive name. Handle this case by ignoring separators
during iteration.
Reviewers: rnk
Subscribers: danalbert, srhines
Differential Revision: https://reviews.llvm.org/D36752
llvm-svn: 311382
The various BinaryStream classes had explicit copy constructors
which resulted in deleted move constructors. This was causing
the internal std::shared_ptr to get copied rather than moved
very frequently, since these classes are often used as return
values.
Patch by Alex Telishev
Differential Revision: https://reviews.llvm.org/D36942
llvm-svn: 311368
An environment variable can be in one of three states:
1. undefined.
2. defined with a non-empty value.
3. defined but with an empty value.
The windows implementation did not support case 3
(it was not handling errors). The Linux implementation
is already correct.
Differential Revision: https://reviews.llvm.org/D36394
llvm-svn: 311174
I want to reuse this code in SimplifyDemandedBits handling of Add/Sub. This will make that easier.
Wonder if we should use it in SelectionDAG's computeKnownBits too.
Differential Revision: https://reviews.llvm.org/D36433
llvm-svn: 310378
Summary:
Tools like clang that use RemoveFileOnSignal on their output files
weren't actually able to clean up their outputs before this change. Now
the call to llvm::sys::fs::remove succeeds and the temporary file is
deleted. This is a stop-gap to fix clang before implementing the
solution outlined in PR34070.
Reviewers: davide
Subscribers: llvm-commits, hiraditya
Differential Revision: https://reviews.llvm.org/D36337
llvm-svn: 310137
Summary:
It was added to support clang warnings about includes with case
mismatches, but it ended up not being necessary.
Reviewers: twoh, rafael
Subscribers: hiraditya, llvm-commits
Differential Revision: https://reviews.llvm.org/D36328
llvm-svn: 310078
The full story is in the comments:
// Do not attempt to close stdout or stderr. We used to try to maintain the
// property that tools that support writing file to stdout should not also
// write informational output to stdout, but in practice we were never able to
// maintain this invariant. Many features have been added to LLVM and clang
// (-fdump-record-layouts, optimization remarks, etc) that print to stdout, so
// users must simply be aware that mixed output and remarks is a possibility.
NFC, I am just updating comments to reflect reality.
llvm-svn: 310016
The file is called "intrin.h". When building targeting Windows on a Linux
system, with the SDK mounted in a case-insensitive file system, "Intrin.h" will
miss clang's intrin.h header (because that's not in a case-insensitive file
system) but then find intrin.h in the Microsoft SDK. clang can't handle the
SDK's intrin.h.
https://reviews.llvm.org/D36281
llvm-svn: 309980
Found it during work on LLD, it would crash on following
linker script:
SECTIONS { .foo : { *("*®") } }
That happens because ® has int value -82. And chars are used as
array index in code, and are signed by default.
Differential revision: https://reviews.llvm.org/D35891
llvm-svn: 309549
Summary:
Using c++11 enum classes ensures that only valid enum values are used
for ArchKind, ProfileKind, VersionKind and ISAKind. This removes the
need for checks that the provided values map to a proper enum value,
allows us to get rid of AK_LAST and prevents comparing values from
different enums. It also removes a bunch of static_cast
from unsigned to enum values and vice versa, at the cost of introducing
static casts to access AArch64ARCHNames and ARMARCHNames by ArchKind.
FPUKind and ArchExtKind are the only remaining old-style enum in
TargetParser.h. I think it's beneficial to keep ArchExtKind as old-style
enum, but FPUKind can be converted too, but this patch is quite big, so
could do this in a follow-up patch. I could also split this patch up a
bit, if people would prefer that.
Reviewers: rengolin, javed.absar, chandlerc, rovka
Reviewed By: rovka
Subscribers: aemerson, kristof.beyls, llvm-commits
Differential Revision: https://reviews.llvm.org/D35882
llvm-svn: 309287
This patch improves our guessing of unknown Intel CPUs to support Goldmont and skylake-avx512.
Differential Revision: https://reviews.llvm.org/D35161
llvm-svn: 309246
Summary:
Previously were in support. Since many many things depend on support,
were all forced to also depend on libxml2, which we only want in a few cases.
This puts all the libxml2 deps in a separate lib to be used only in a few
places.
Reviewers: ruiu, thakis, rnk
Subscribers: mgorny, hiraditya, llvm-commits
Differential Revision: https://reviews.llvm.org/D35819
llvm-svn: 309070
Summary:
Does a simple merge, where mergeable elements are combined, all others
are appended. Does not apply trickly namespace rules.
Subscribers: llvm-commits, hiraditya
Differential Revision: https://reviews.llvm.org/D35753
llvm-svn: 309047
Summary: Implement parsing and writing of a single xml manifest file.
Subscribers: mgorny, llvm-commits, hiraditya
Differential Revision: https://reviews.llvm.org/D35425
llvm-svn: 308679
As a follow up of the bad alloc handler patch, this patch introduces nullptr checks on pointers returned from the
malloc/realloc/calloc functions. In addition some memory size assignments are moved behind the allocation
of the corresponding memory to fulfill exception safe memory management (RAII).
patch by Klaus Kretzschmar
Differential Revision: https://reviews.llvm.org/D35414
llvm-svn: 308576
It was warning like:
../llvm-project/llvm/lib/Support/ErrorHandling.cpp:172:51: warning:
ignoring return value of ‘ssize_t write(int, const void*, size_t)’,
declared with attribute warn_unused_result [-Wunused-result]
(void)::write(2, OOMMessage, strlen(OOMMessage));
Work around the warning by storing the return value in a variable and
casting that to void instead. We already did this for the other write()
call in this file.
llvm-svn: 308483
This patch series adds support for the IBM z14 processor. This part includes:
- Basic support for the new processor and its features.
- Support for new instructions (except vector 32-bit float and 128-bit float).
- CodeGen for new instructions, including new LLVM intrinsics.
- Scheduler description for the new processor.
- Detection of z14 as host processor.
Support for the new 32-bit vector float and 128-bit vector float
instructions is provided by separate patches.
llvm-svn: 308194
Summary:
The current yaml::Input constructor takes a StringRef of data as its
first parameter, discarding any filename information that may have been
present when a YAML file was opened. Add an alterate yaml::Input
constructor that takes a MemoryBufferRef, which can have a filename
associated with it. This leads to clearer diagnostic messages.
Sponsored By: DARPA, AFRL
Reviewed By: arphaman
Differential Revision: https://reviews.llvm.org/D35398
Patch by: Jonathan Anderson (trombonehero)
llvm-svn: 308172
We're already using it in 64-bit builds because 64-bit MSVC doesn't support inline assembly.
As far as I know we were using inline assembly because at the time the code was added we had to support MSVC 2008 pre-SP1 while the intrinsic was added to MSVC in SP1. Now that we don't have to support that we should be able to just use the intrinsic.
llvm-svn: 308163
As far as I can tell we can simply distinguish based on features rather than model number. Many of the strings we were previously using are treated the same by the backend.
llvm-svn: 307884
Summary: Different JITs and other clients of LLVM may have different needs in how symbol resolution should occur.
Reviewers: v.g.vassilev, lhames, karies
Reviewed By: v.g.vassilev
Subscribers: pcanal, llvm-commits
Differential Revision: https://reviews.llvm.org/D33529
llvm-svn: 307849
ManagedStatic<sys::Mutex> would lazilly allocate a sys::Mutex to lock
when reporting an OOM, which is a bad idea.
The three STL implementations that I know of use pthread_mutex_lock and
EnterCriticalSection to implement std::mutex. I'm pretty sure that
neither of those allocate heap memory.
It seems that we unconditionally use std::mutex without testing
LLVM_ENABLE_THREADS elsewhere in the codebase, so this should be
portable.
llvm-svn: 307827
This adds all the feature bits libgcc has. They will soon be added to compiler-rt as well. This adds a second 32 bit feature variable to hold the bits that are needed by getHostCPUName that are not in libgcc. libgcc had already used 31 of the 32 bits in the existing variable and we needed 3 bits so at minimum 2 bits would spill over. I chose to move all 3.
llvm-svn: 307758
Summary:
A space was added between '-' and 'help' when emitting help output.
See https://reviews.llvm.org/D22621 for details.
Reviewers: MaggieYi, vsk
Reviewed By: vsk
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D35283
llvm-svn: 307745
Summary:
Patch by Klaus Kretzschmar
We would like to introduce a new type of llvm error handler for handling
bad alloc fault situations. LLVM already provides a fatal error handler
for serious non-recoverable error situations which by default writes
some error information to stderr and calls exit(1) at the end (functions
are marked as 'noreturn').
For long running processes (e.g. a server application), exiting the
process is not an acceptable option, especially not when the system is
in a temporary resource bottleneck with a good chance to recover from
this fault situation. In such a situation you would rather throw an
exception to stop the current compilation and try to overcome the
resource bottleneck. The user should be aware of the problem of throwing
an exception in bad alloc situations, e.g. you must not do any
allocations in the unwind chain. This is especially true when adding
exceptions in existing unfamiliar code (as already stated in the comment
of the current fatal error handler)
So the new handler can also be used to distinguish from general fatal
error situations where recovering is no option. It should be used in
cases where a clean unwind after the allocation is guaranteed.
This patch contains:
- A report_bad_alloc function which calls a user defined bad alloc
error handler. If no user handler is registered the
report_fatal_error function is called. This function is not marked as
'noreturn'.
- A install/restore_bad_alloc_error_handler to install/restore the bad
alloc handler.
- An example (in Mutex.cpp) where the report_bad_alloc function is
called in case of a malloc returns a nullptr.
If this patch gets accepted we would create similar patches to fix
corresponding malloc/calloc usages in the llvm code.
Reviewers: chandlerc, greened, baldrick, rnk
Reviewed By: rnk
Subscribers: llvm-commits, MatzeB
Differential Revision: https://reviews.llvm.org/D34753
llvm-svn: 307673
These asserts could only occur if we fail to properly detect the compiler, but an assert is not a good way to do that because it doesn't work in release builds.
I wonder if we could use #error?
llvm-svn: 307520
Users of getHostCPUName should also use getHostCPUFeatures which will take care of making sure avx512 is disabled if the CPU doesn't support it. This is consistent with what we do for other CPUs.
llvm-svn: 307495
Summary:
(re)definition of _RESTRICT_KYWD rightfully causes a warning message during the Solaris build.
This hack is not needed if build compiler is properly configured (.e.g /usr/bin/gcc) so just remove it.
Reviewers: ro, mgorny, krytarowski, joerg
Reviewed By: joerg
Subscribers: quenelle, llvm-commits
Patch by Fedor Sergeev (Oracle).
Differential Revision: https://reviews.llvm.org/D35054
llvm-svn: 307469
The CPU name is really just used for scheduler and other microarchitectural optimizations. The feature flags should be determined by getHostCPUFeatures which should always be used with getHostCPUName. Trying to alter CPU name strings to control features just isn't practical.
Most of these types of things were removed from Intel CPUs a while ago.
This is part of my plan to bring compiler-rt's cpu_model.c file up to date with the equivalent functionality in libgcc. A lot of the code in that file is copied from Host.cpp and we want to keep them reasonably in sync.
llvm-svn: 307467
the system's version of macOS
sys::getProcessTriple returns LLVM_HOST_TRIPLE, whose system version might not
be the actual version of the system on which the compiler running. This commit
ensures that, for macOS, sys::getProcessTriple returns a triple with the
system's macOS version.
rdar://33177551
Differential Revision: https://reviews.llvm.org/D34446
llvm-svn: 307372
This is a short-term fix for PR33650 aimed to get the modules build bots green again.
Remove all the places where we use the LLVM_YAML_IS_(FLOW_)?SEQUENCE_VECTOR
macros to try to locally specialize a global template for a global type. That's
not how C++ works.
Instead, we now centrally define how to format vectors of fundamental types and
of string (std::string and StringRef). We use flow formatting for the former
cases, since that's the obvious right thing to do; in the latter case, it's
less clear what the right choice is, but flow formatting is really bad for some
cases (due to very long strings), so we pick block formatting. (Many of the
cases that were using flow formatting for strings are improved by this change.)
Other than the flow -> block formatting change for some vectors of strings,
this should result in no functionality change.
Differential Revision: https://reviews.llvm.org/D34907
Corresponding updates to clang, clang-tools-extra, and lld to follow.
llvm-svn: 306878
The difference from the previous version is the use of decltype, as the
implementation of std::result_of in libc++ did not work correctly for
variadic function like open(2).
Original summary:
This function retries an operation if it was interrupted by a signal
(failed with EINTR). It's inspired by the TEMP_FAILURE_RETRY macro in
glibc, but I've turned that into a template function. I've also added a
fail-value argument, to enable the function to be used with e.g.
fopen(3), which is documented to fail for any reason that open(2) can
fail (which includes EINTR).
The main user of this function will be lldb, but there were also a
couple of uses within llvm that I could simplify using this function.
Reviewers: zturner, silvas, joerg
Subscribers: mgorny, llvm-commits
Differential Revision: https://reviews.llvm.org/D33895
llvm-svn: 306671
Ananas is a home-brew operating system, mainly for amd64 machines. After
using GCC for quite some time, it has switched to clang and never looked
back - yet, having to manually patch things is annoying, so it'd be much
nicer if this was in the official tree.
More information:
https://github.com/zhmu/ananas/https://rink.nu/projects/ananas.html
Submitted by: Rink Springer
Differential Revision: https://reviews.llvm.org/D32937
llvm-svn: 306237
This is useful when an upper limit on the cache size needs to be
controlled independently of the amount of the amount of free space.
One use case is a machine with a large number of cache directories
(e.g. a buildbot slave hosting a large number of independent build
jobs). By imposing an upper size limit on each cache directory,
users can more easily estimate the server's capacity.
Differential Revision: https://reviews.llvm.org/D34547
llvm-svn: 306126
This is essentially just a BinaryStreamRef packaged with an
offset and the logic for reading one is no different than the
logic for reading a BinaryStreamRef, except that we save the
current offset.
llvm-svn: 306122
Summary:
The function matches the interface of llvm::to_integer, but as we are
calling out to a C library function, I let it take a Twine argument, so
we can avoid a string copy at least in some cases.
I add a test and replace a couple of existing uses of strtod with this
function.
Reviewers: zturner
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D34518
llvm-svn: 306096
The fix in r306003 uncovered a pretty fundamental problem that libc++
implementation of std::result_of does not handle the prototype of
open(2) correctly (presumably because it contains ...). This makes the
whole function unusable in its current form, so I am also reverting the
original commit (r305892), which introduced the function, at least until
I figure out a way to solve the libc++ issue.
llvm-svn: 306005
Summary:
This function retries an operation if it was interrupted by a signal
(failed with EINTR). It's inspired by the TEMP_FAILURE_RETRY macro in
glibc, but I've turned that into a template function. I've also added a
fail-value argument, to enable the function to be used with e.g.
fopen(3), which is documented to fail for any reason that open(2) can
fail (which includes EINTR).
The main user of this function will be lldb, but there were also a
couple of uses within llvm that I could simplify using this function.
Reviewers: zturner, silvas, joerg
Subscribers: mgorny, llvm-commits
Differential Revision: https://reviews.llvm.org/D33895
llvm-svn: 305892
This is a workaround for large file writes. It has been witnessed that
write(2) failing with EINVAL (22) due to a large value (>2G). Thanks to
James Knight for the help with coming up with a sane test case.
llvm-svn: 305846
No behavior is changed if LLVM_TARGET_TRIPLE_ENV is blank or undefined.
If LLVM_TARGET_TRIPLE_ENV is "TEST_TARGET_TRIPLE" and $TEST_TARGET_TRIPLE is not blank,
llvm::sys::getDefaultTargetTriple() returns $TEST_TARGET_TRIPLE.
Lit resets config.target_triple and config.environment[LLVM_TARGET_TRIPLE_ENV] to change the default target.
Without changing LLVM_DEFAULT_TARGET_TRIPLE nor rebuilding, lit can be run;
TEST_TARGET_TRIPLE=i686-pc-win32 bin/llvm-lit -sv path/to/test/
TEST_TARGET_TRIPLE=i686-pc-win32 ninja check-clang-tools
Differential Revision: https://reviews.llvm.org/D33662
llvm-svn: 305632
This patch should fix sanitizer-x86_64-linux-fast bot.
The problem was that the contents of this stream are aligned to 4 byte,
and the paddings were created just by incrementing `Offset`, so paddings
had undefined values. When the entire stream is written to an output,
it triggered msan.
llvm-svn: 305541
It doesn't seem relevant to set an address space limit - this isn't
important in any sense that I'm aware & it gets in the way of things
that use a lot of address space, like llvm-symbolizer.
This came up when I realized that bugpoint regression tests were much
slower with -gsplit-dwarf than plain -g. Turned out that bugpoint
subprocesses (opt, etc) were crashing and doing symbolization - but
bugpoint runs those subprocesses with a 400MB memory limit. So with
plain -g, mmaping the opt binary would exceed the memory limit, fail,
and thus be really fast - no symbolization occurred. Whereas with
-gsplit-dwarf, comically, having less to map in, it would succeed and
then spend lots of time symbolizing.
I've fixed at least the critical part of bugpoint's perf problem there
by adding an option to allow bugpoint to disable symbolization. Thus
improving the perfromance for -gsplit-dwarf and making the -g-esque
speed available without this quirk/accidental benefit.
llvm-svn: 305242
This is a precursor to another change (coming soon) that aims to make
FoldingSet's API more type-safe. Without this, the type-safety change
would just duplicate 4 more public methods between the already very
similar classes.
This renames FoldingSetImpl to FoldingSetBase so it's consistent with
the FooBase -> FooImpl<T> -> Foo<T> convention we seem to have with
other containers.
llvm-svn: 305231
Initial implementation - needs similar work/testing for other tools
bugpoint invokes (llc, lli I think, maybe more).
Alternatively (as suggested by chandlerc@) an environment variable could
be used. This would allow the option to pass transparently through user
scripts, pass to compilers if they happened to be LLVM-ish, etc.
I worry a bit about using cl::opt in the crash handling code - LLVM
might crash early, perhaps before the cl::opt is properly initialized?
Or at least before arguments have been parsed?
- should be OK since it defaults to "pretty", so if the crash is very
early in opt parsing, etc, then crash reports will still be symbolized.
I shyed away from doing this with an environment variable when I
realized that would require copying the existing environment and
appending the env variable of interest. But it seems there's no existing
LLVM API for accessing the environment (even the Support tests for
process launching have their own ifdefs for getting the environment). It
could be added, but seemed like a higher bar/untested codepath to
actually add environment variables.
Most importantly, this reduces the runtime of test/BugPoint/metadata.ll
in a split-dwarf Debug build from 1m34s to 6.5s by avoiding a lot of
symbolication. (this wasn't a problem for non-split-dwarf builds only
because the executable was too large to map into memory (due to bugpoint
setting a 400MB memory (including address space - not sure why? Going to
remove that) limit on the child process) so symbolication would fail
fast & wouldn't spend all that time parsing DWARF, etc)
Reviewers: chandlerc, dannyb
Differential Revision: https://reviews.llvm.org/D33804
llvm-svn: 305056
Summary:
This patch updates Triple::isCompatibleWith to make armxx and thumbxx
triples compatible, as long as the subarch, vendor, os, envorionment and
object format match. Thumb/ARM code generation should be controlled
using the thumb-mode per-function target feature rather than by the
triple to allow mixing Thumb and ARM functions.
D33448 updates Clang's codegen to add thumb-mode for all functions with
armxx or thumbxx triples.
Reviewers: echristo, t.p.northover, rafael, kristof.beyls, rengolin, tejohnson
Reviewed By: tejohnson
Subscribers: rinon, eugenis, pcc, srhines, aemerson, mehdi_amini, javed.absar, llvm-commits
Differential Revision: https://reviews.llvm.org/D33287
llvm-svn: 304884
This creates a new library called BinaryFormat that has all of
the headers from llvm/Support containing structure and layout
definitions for various types of binary formats like dwarf, coff,
elf, etc as well as the code for identifying a file from its
magic.
Differential Revision: https://reviews.llvm.org/D33843
llvm-svn: 304864
Summary:
I would like to add printing of registered targets to clang's version
information. For this to work correctly, the VersionPrinter logic in
CommandLine.cpp should support printing to arbitrary raw_ostreams,
instead of always defaulting to outs().
Add a raw_ostream& parameter to the function pointer type used for
VersionPrinter, and while doing so, introduce a typedef for convenience.
Note that VersionPrinter::print() will still default to using outs(),
the clang part will necessarily go into a separate review.
Reviewers: beanz, chandlerc, dberris, mehdi_amini, zturner
Reviewed By: mehdi_amini
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D33899
llvm-svn: 304835
I did this a long time ago with a janky python script, but now
clang-format has built-in support for this. I fed clang-format every
line with a #include and let it re-sort things according to the precise
LLVM rules for include ordering baked into clang-format these days.
I've reverted a number of files where the results of sorting includes
isn't healthy. Either places where we have legacy code relying on
particular include ordering (where possible, I'll fix these separately)
or where we have particular formatting around #include lines that
I didn't want to disturb in this patch.
This patch is *entirely* mechanical. If you get merge conflicts or
anything, just ignore the changes in this patch and run clang-format
over your #include lines in the files.
Sorry for any noise here, but it is important to keep these things
stable. I was seeing an increasing number of patches with irrelevant
re-ordering of #include lines because clang-format was used. This patch
at least isolates that churn, makes it easy to skip when resolving
conflicts, and gets us to a clean baseline (again).
llvm-svn: 304787
Summary:
The workaround added in rL301240 for stderr/out/in symbols being both
macros and globals is only necessary for glibc, and it does not compile
with musl libc. Alpine Linux has had the following fix for it:
https://git.alpinelinux.org/cgit/aports/plain/main/llvm4/llvm-fix-DynamicLibrary-to-build-with-musl-libc.patch
Adapt the fix in our DynamicLibrary.inc for Unix.
Reviewers: marsupial, chandlerc, krytarowski
Reviewed By: krytarowski
Subscribers: srhines, krytarowski, llvm-commits
Differential Revision: https://reviews.llvm.org/D33883
llvm-svn: 304707
Summary: Wasm object format has some functionality regressions from the ELF format, and doesn't play nicely with the rest of the toolchain. It should eventually be the default, but not yet.
Reviewers: sunfish, sbc100
Subscribers: jfb, dschuff, llvm-commits
Differential Revision: https://reviews.llvm.org/D33811
llvm-svn: 304512
Summary:
Solaris-specific implementation for llvm::sys::fs::is_local_impl.
FStype pattern matching might be a bit unreliable, but at least it fixes the build failure.
Reviewers: mgorny, nlopes, llvm-commits, krytarowski
Reviewed By: krytarowski
Subscribers: voskresensky.vladimir, krytarowski
Differential Revision: https://reviews.llvm.org/D33695
llvm-svn: 304412
This is super awkward, but GCC doesn't let us have template visible when
an argument is an inline function and -fvisibility-inlines-hidden is
used.
llvm-svn: 304175
error C2971: 'llvm::ManagedStatic': template parameter 'Creator': 'CreateDefaultTimerGroup': a variable with non-static storage duration cannot be used as a non-type argument
llvm-svn: 304157
This used to be just leaked. r295370 made it use magic statics. This adds
a global destructor, which is something we'd like to avoid. It also creates
a weird situation where the mutex used by TimerGroup is re-created during
global shutdown and leaked.
Using a ManagedStatic here is also subtle as it relies on the mutex
inside of ManagedStatic to be recursive. I've added a test for that
in a previous change.
llvm-svn: 304156
ConvertUTF.cpp has a little dependency on LLVM, and since the code extensively uses fall-through switches,
I prefer disabling the warning for the whole file, rather than adding attributes for each case.
llvm-svn: 304120
Summary:
r295737 included a fix for leaking libraries loaded via. DynamicLibrary::addPermanentLibrary.
This created a problem where static constructors in a library could insert llvm::ManagedStatic objects before DynamicLibrary would register it's own ManagedStatic, meaning a crash could occur at shutdown.
r301562 exasperated this problem by cleaning up the DynamicLibrary ManagedStatic during llvm_shutdown.
Reviewers: v.g.vassilev, lhames, efriedma
Reviewed By: efriedma
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D33581
llvm-svn: 304027
Previously it would do a character by character search for a null
terminator, to account for the fact that an arbitrary stream need not
store its data contiguously so you couldn't just do a memchr. However, the
stream API has a function which will return the longest contiguous chunk
without doing a copy, and by using this function we can do a memchr on the
individual chunks. For certain types of streams like data from object
files etc, this is guaranteed to find the null terminator with only a
single memchr, but even with discontiguous streams such as
MappedBlockStream, it's rare that any given string will cross a block
boundary, so even those will almost always be satisfied with a single
memchr.
This optimization is worth a 10-12% reduction in link time (4.2 seconds ->
3.75 seconds)
Differential Revision: https://reviews.llvm.org/D33503
llvm-svn: 303918
AVX512_VPOPCNTDQ is a new feature set that was published by Intel.
The patch represents the LLVM side of the addition of two new intrinsic based instructions (vpopcntd and vpopcntq).
Differential Revision: https://reviews.llvm.org/D33169
llvm-svn: 303858
Summary:
This patch adds udiv/sdiv/urem/srem/udivrem/sdivrem methods that can divide by a uint64_t. This makes division consistent with all the other arithmetic operations.
This modifies the interface of the divide helper method to work on raw arrays instead of APInts. This way we can pass the uint64_t in for the RHS without wrapping it in an APInt. This required moving all the Quotient and Remainder allocation handling up to the callers. For udiv/urem this was as simple as just creating the Quotient/Remainder with the right size when they were declared. For udivrem we have to rely on reallocate not changing the contents of the variable LHS or RHS is aliased with the Quotient or Remainder APInts. We also have to zero the upper bits of Remainder and Quotient that divide doesn't write to if lhsWords/rhsWords is smaller than the width.
I've update the toString method to use the new udivrem.
Reviewers: hans, dblaikie, RKSimon
Reviewed By: RKSimon
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D33310
llvm-svn: 303431
compatible target triple
Currently, an assertion fails in ThinLTOCodeGenerator::addModule when
the target triple of the module being added doesn't match that of the
one stored in TMBuilder. This patch relaxes the constraint and makes
changes to allow target triples that only differ in their version
numbers on Apple platforms, similarly to what r228999 did.
rdar://problem/30133904
Differential Revision: https://reviews.llvm.org/D33291
llvm-svn: 303326
Often you have an array and you just want to use it. With the current
design, you have to first construct a `BinaryByteStream`, and then create
a `BinaryStreamRef` from it. Worse, the `BinaryStreamRef` holds a pointer
to the `BinaryByteStream`, so you can't just create a temporary one to
appease the compiler, you have to actually hold onto both the `ArrayRef`
as well as the `BinaryByteStream` *AND* the `BinaryStreamReader` on top of
that. This makes for very cumbersome code, often requiring one to store a
`BinaryByteStream` in a class just to circumvent this.
At the cost of some added complexity (not exposed to users, but internal
to the library), we can do better than this. This patch allows us to
construct `BinaryStreamReaders` and `BinaryStreamWriters` directly from
source data (e.g. `StringRef`, `MutableArrayRef<uint8_t>`, etc). Not only
does this reduce the amount of code you have to type and make it more
obvious how to use it, but it solves real lifetime issues when it's
inconvenient to hold onto a `BinaryByteStream` for a long time.
The additional complexity is in the form of an added layer of indirection.
Whereas before we simply stored a `BinaryStream*` in the ref, we now store
both a `BinaryStream*` **and** a `std::shared_ptr<BinaryStream>`. When
the user wants to construct a `BinaryStreamRef` directly from an
`ArrayRef` etc, we allocate an internal object that holds ownership over a
`BinaryByteStream` and forwards all calls, and store this in the
`shared_ptr<>`. This also maintains the ref semantics, as you can copy it
by value and references refer to the same underlying stream -- the one
being held in the object stored in the `shared_ptr`.
Differential Revision: https://reviews.llvm.org/D33293
llvm-svn: 303294
driver-mode recognition in clang (this is because the sysctl method
always returns one and only one executable path, even for an executable
with multiple links):
Fix DynamicLibraryTest.cpp on FreeBSD and NetBSD
Summary:
After rL301562, on FreeBSD the DynamicLibrary unittests fail, because
the test uses getMainExecutable("DynamicLibraryTests", Ptr), and since
the path does not contain any slashes, retrieving the main executable
will not work.
Reimplement getMainExecutable() for FreeBSD and NetBSD using sysctl(3),
which is more reliable than fiddling with relative or absolute paths.
Also add retrieval of the original argv[] from the GoogleTest framework,
to use as a fallback for other OSes.
Reviewers: emaste, marsupial, hans, krytarowski
Reviewed By: krytarowski
Subscribers: krytarowski, llvm-commits
Differential Revision: https://reviews.llvm.org/D33171
llvm-svn: 303285
We have to check gCrashRecoveryEnabled before using __try.
In other words, SEH works too well and we ended up recovering from
crashes in implicit module builds that we weren't supposed to. Only
libclang is supposed to enable CrashRecoveryContext to allow implicit
module builds to crash.
llvm-svn: 303279
Summary:
It avoids problems when other libraries raise exceptions. In particular,
OutputDebugString raises an exception that the debugger is supposed to
catch and suppress. VEH kicks in first right now, and that is entirely
incorrect.
Unfortunately, GCC does not support SEH, so I've kept the old buggy VEH
codepath around. We could fix it with SetUnhandledExceptionFilter, but
that is not per-thread, so a well-behaved library shouldn't set it.
Reviewers: zturner
Subscribers: llvm-commits, mgorny
Differential Revision: https://reviews.llvm.org/D33261
llvm-svn: 303274
Since we use AddVectoredExceptionHandler, we get notified of
every exception that gets raised by a program. Sometimes these
are not necessarily errors though, and this can be especially
true when linking against a library that we have no control
over, and may raise an exception internally which it intends
to catch.
In particular, the Windows API OutputDebugString does exactly
this. It raises an exception inside of a __try / __except,
giving the debugger a chance to handle the exception to print
the message to the debug console.
But this doesn't interoperate nicely with our vectored exception
handler, which just sees another exception and decides that we
need to terminate the program.
Add a special case for this so that we ignore ODS exceptions
and continue normally.
Note that a better fix is to simply not use vectored exception
handlers and use SEH instead, but given that MinGW doesn't support
SEH, this is the only solution for MinGW.
Differential Revision: https://reviews.llvm.org/D33260
llvm-svn: 303219
Summary:
After rL301562, on FreeBSD the DynamicLibrary unittests fail, because
the test uses getMainExecutable("DynamicLibraryTests", Ptr), and since
the path does not contain any slashes, retrieving the main executable
will not work.
Reimplement getMainExecutable() for FreeBSD and NetBSD using sysctl(3),
which is more reliable than fiddling with relative or absolute paths.
Also add retrieval of the original argv[] from the GoogleTest framework,
to use as a fallback for other OSes.
Reviewers: emaste, marsupial, hans, krytarowski
Reviewed By: krytarowski
Subscribers: krytarowski, llvm-commits
Differential Revision: https://reviews.llvm.org/D33171
llvm-svn: 303015
We already counted the number of bits in the RHS so its pretty cheap to just check if the RHS is 1.
Differential Revision: https://reviews.llvm.org/D33154
llvm-svn: 302953
This helped the compiler generate better code for the single word case. It was able to remember that the bit width was still a single word when it created the Remainder APInt and not create code for it possibly being multiword.
llvm-svn: 302952
At this point in the code rhsWords is guaranteed to be non-zero and less than or equal to lhsWords. So if lhsWords is 1, rhsWords must also be 1. urem alread had the check removed so this makes all 3 consistent.
llvm-svn: 302930
Summary:
This adds a resize method to APInt that manages deleting/allocating storage for an APInt and changes its bit width. Use this to simplify code in copy assignment and divide.
The assignment code in particular was overly complicated. Treating every possible case as a separate implementation. I'm also pretty sure the clearUnusedBits code at the end was unnecessary. Since we always copying whole words from the source APInt. All unused bits should be clear in the source.
Reviewers: hans, RKSimon
Reviewed By: RKSimon
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D33073
llvm-svn: 302863
This time it actually occurred to me to change the #defines
to actually test the pre-processed out codepath. Hopefully
this time it works.
llvm-svn: 302752
This lets toString take advantage of the degenerate case checks in udivrem and is just generally cleaner.
One minor downside of this is that the divisor APInt now needs to be the same size as Tmp which requires an additional allocation. But we were doing a poor job of reusing allocations before so the new code should still be an improvement.
llvm-svn: 302704
The description says it returns the number of words needed to represent the results. But the way it was coded it always returns (lhsWords + rhsWords) or (lhsWords + rhsWords - 1). But the result could be even smaller than that and it wouldn't tell you.
No one uses the result today so rather than try to fix it, just remove it.
llvm-svn: 302551
The value of 'i' is always the smaller of DstParts and SrcParts so we can just use that fact to write all the code in terms of SrcParts and DstParts.
llvm-svn: 302408
Currently multiply is implemented in operator*=. Operator* makes a copy and uses operator*= to modify the copy.
Operator*= itself allocates a temporary buffer to hold the multiply result as it computes it. Then copies it to the buffer in *this.
Operator*= attempts to bound the size of the result based on the number of active bits in its inputs. It also has a couple special cases to handle 0 inputs without any memory allocations or multiply operations. The best case is that it calculates a single word regardless of input bit width. The worst case is that it calculates the a 2x input width result and drop the upper bits.
Since operator* uses operator*= it incurs two allocations, one for a copy of *this and one for the temporary allocation. Neither of these allocations are kept after the method operation is done.
The main usage in the backend appears to be ConstantRange::multiply which uses operator* rather than operator*=.
This patch moves the multiply operation to operator* and implements operator*= using it. This avoids the copy in operator*. operator* now allocates a result buffer sized the same width as its inputs no matter what. This buffer will be used as the buffer for the returned APInt. Finally, we reuse tcMultiply to implement the multiply operation. This function is capable of not calculating additional upper words that will be discarded.
This change does lose the special optimizations for the inputs using less words than their size implies. But it also removed the getActiveBits calls from all multiplies. If we think those optimizations are important we could look at providing additional bounds to tcMultiply to limit the computations.
Differential Revision: https://reviews.llvm.org/D32830
llvm-svn: 302171
Otherwise, each CPU has to manually specify the extensions it supports,
even though they have to be a superset of the base arch extensions.
And when there's redundant data there's stale data, so most of the CPUs
lie about the features they support (almost none lists AEK_FP).
Instead, do the saner thing: add the optional extensions on top of the
base extensions provided by the architecture.
The ARM TargetParser has the same behavior.
Differential Revision: https://reviews.llvm.org/D32780
llvm-svn: 302078
This was reverted due to a "missing" file, but in reality
what happened was that I renamed a file, and then due to
a merge conflict both the old file and the new file got
added to the repository. This led to an unused cpp file
being in the repo and not referenced by any CMakeLists.txt
but #including a .h file that wasn't in the repo. In an
even more unfortunate coincidence, CMake didn't report the
unused cpp file because it was in a subdirectory of the
folder with the CMakeLists.txt, and not in the same directory
as any CMakeLists.txt.
The presence of the unused file was then breaking certain
tools that determine file lists by globbing rather than
by what's specified in CMakeLists.txt
In any case, the fix is to just remove the unused file from
the patch set.
llvm-svn: 302042
This patch adds support for the the LightWeight Profiling (LWP) instructions which are available on all AMD Bulldozer class CPUs (bdver1 to bdver4).
Reapplied - this time without changing line endings of existing files.
Differential Revision: https://reviews.llvm.org/D32769
llvm-svn: 302041
Currently several places assume the VAL member is always at least the same size as pVal. In particular for a memcpy in the move assignment operator. While this is a true assumption, it isn't good practice to assume this.
This patch gives the union a name so we can write the memcpy in terms of the union itself. This also adds a similar memcpy to the move constructor where we previously just copied using VAL directly.
This patch is mostly just a mechanical addition of the U in front of VAL and pVAL everywhere. But several constructors had to be modified since we can't directly initializer a field of named union from the initializer list.
Differential Revision: https://reviews.llvm.org/D30629
llvm-svn: 302040
This patch adds support for the the LightWeight Profiling (LWP) instructions which are available on all AMD Bulldozer class CPUs (bdver1 to bdver4).
Differential Revision: https://reviews.llvm.org/D32769
llvm-svn: 302028
The "macosx" OS type is still the canonical type. In the future "macos" will
become the canonical OS type (but we will still support "macosx").
rdar://27043820
Differential Revision: https://reviews.llvm.org/D32748
llvm-svn: 302011
The patch is failing to add StringTableStreamBuilder.h, but that isn't
even discovered because the corresponding StringTableStreamBuilder.cpp
isn't added to any CMakeLists.txt file and thus never built. I think
this patch is just incomplete.
llvm-svn: 302002
Previously we had knowledge of how to serialize and deserialize
a string table inside of DebugInfo/PDB, but the string table
that it serializes contains a piece that is actually considered
CodeView and can appear outside of a PDB. We already have logic
in llvm-readobj and MCCodeView to read and write this format,
so it doesn't make sense to duplicate the logic in DebugInfoPDB
as well.
This patch makes codeview::StringTable (for writing) and
codeview::StringTableRef (for reading), updates DebugInfoPDB
to use these classes for its own writing, and updates llvm-readobj
to additionally use StringTableRef for reading.
It's a bit more difficult to get MCCodeView to use this for
writing, but it's a logical next step.
llvm-svn: 301986
When dumping raw data from a stream, you might know the offset
of a certain record you're interested in, as well as how long
that record is. Previously, you had to dump the entire stream
and wade through the bytes to find the interesting record.
This patch allows you to specify an offset and length on the
command line, and it will only dump the requested range.
llvm-svn: 301607
libraries are properly unloaded when llvm_shutdown is called.
Summary:
This was mostly affecting usage of the JIT, where storing the library handles in
a set made iteration unordered/undefined. This lead to disagreement between the
JIT and native code as to what the address and implementation of particularly on
Windows with stdlib functions:
JIT: putenv_s("TEST", "VALUE") // called msvcrt.dll, putenv_s
JIT: getenv("TEST") -> "VALUE" // called msvcrt.dll, getenv
Native: getenv("TEST") -> NULL // called ucrt.dll, getenv
Also fixed is the issue of DynamicLibrary::getPermanentLibrary(0,0) on Windows
not giving priority to the process' symbols as it did on Unix.
Reviewers: chapuni, v.g.vassilev, lhames
Reviewed By: lhames
Subscribers: danalbert, srhines, mgorny, vsk, llvm-commits
Differential Revision: https://reviews.llvm.org/D30107
llvm-svn: 301562
The previous algorithm processed one character at a time, which is very
painful on a modern CPU. Replace it with xxHash64, which both already
exists in the codebase and is fairly fast.
Patch from Scott Smith!
Differential Revision: https://reviews.llvm.org/D32509
llvm-svn: 301487
libraries are properly unloaded when llvm_shutdown is called.
Summary:
This was mostly affecting usage of the JIT, where storing the library handles in
a set made iteration unordered/undefined. This lead to disagreement between the
JIT and native code as to what the address and implementation of particularly on
Windows with stdlib functions:
JIT: putenv_s("TEST", "VALUE") // called msvcrt.dll, putenv_s
JIT: getenv("TEST") -> "VALUE" // called msvcrt.dll, getenv
Native: getenv("TEST") -> NULL // called ucrt.dll, getenv
Also fixed is the issue of DynamicLibrary::getPermanentLibrary(0,0) on Windows
not giving priority to the process' symbols as it did on Unix.
Reviewers: chapuni, v.g.vassilev, lhames
Reviewed By: lhames
Subscribers: danalbert, srhines, mgorny, vsk, llvm-commits
Differential Revision: https://reviews.llvm.org/D30107
llvm-svn: 301236
This replaces a hand written copy loop with a call to memcpy for both zext and sext.
For sext, it replaces multiple if/else blocks propagating sign information forward. Now we just do a copy, a sign extension on the last copied word, a memset, and clearUnusedBits.
Differential Revision: https://reviews.llvm.org/D32417
llvm-svn: 301201
This patch adds an in place version of ashr to match lshr and shl which were recently added.
I've tried to make this similar to the lshr code with additions to handle the sign extension. I've also tried to do this with less if checks than the current ashr code by sign extending the original result to a word boundary before doing any of the shifting. This removes a lot of the complexity of determining where to fill in sign bits after the shifting.
Differential Revision: https://reviews.llvm.org/D32415
llvm-svn: 301198
Summary: SUSE's ARM triples end with -gnueabi even though they are hard-float. This requires special handling of SUSE ARM triples. Hence we need a way to differentiate the SUSE as vendor. This CL adds that.
Reviewers: chandlerc, compnerd, echristo, rengolin
Reviewed By: rengolin
Subscribers: aemerson, rengolin, llvm-commits
Differential Revision: https://reviews.llvm.org/D32426
llvm-svn: 301174
Previously single word would always return 0 regardless of the original sign. Multi word would return all 0s or all 1s based on the original sign. Now single word takes into account the sign as well.
llvm-svn: 301159
The changes are causing the i686-mingw32 build to fail.
This reverts commit r301153, and the changes for a separate warning on i686-mingw32 in r301155 and r301156.
llvm-svn: 301157
libraries are properly unloaded when llvm_shutdown is called.
Summary:
This was mostly affecting usage of the JIT, where storing the library handles in
a set made iteration unordered/undefined. This lead to disagreement between the
JIT and native code as to what the address and implementation of particularly on
Windows with stdlib functions:
JIT: putenv_s("TEST", "VALUE") // called msvcrt.dll, putenv_s
JIT: getenv("TEST") -> "VALUE" // called msvcrt.dll, getenv
Native: getenv("TEST") -> NULL // called ucrt.dll, getenv
Also fixed is the issue of DynamicLibrary::getPermanentLibrary(0,0) on Windows
not giving priority to the process' symbols as it did on Unix.
Reviewers: chapuni, v.g.vassilev, lhames
Reviewed By: lhames
Subscribers: danalbert, srhines, mgorny, vsk, llvm-commits
Differential Revision: https://reviews.llvm.org/D30107
llvm-svn: 301153
The current code is trying to be clever with shifts to avoid needing to clear unused bits. But it looks like the compiler is unable to optimize out the unused bit handling in the APInt constructor. Given this its better to just use SignExtend64 and have more readable code.
llvm-svn: 301133
This reverts commit r301105, 4, 3 and 1, as a follow up of the previous
revert, which broke even more bots.
For reference:
Revert "[APInt] Use operator<<= where possible. NFC"
Revert "[APInt] Use operator<<= instead of shl where possible. NFC"
Revert "[APInt] Use ashInPlace where possible."
PR32754.
llvm-svn: 301111
For single word, shift by BitWidth was always returning 0, but for multiword it was based on original sign. Now single word matches multi word.
llvm-svn: 301094
Currently sle and ule have to call slt/ult and eq to get the proper answer. This results in extra code for both calls and additional scans of multiword APInts.
This patch replaces slt/ult with a compareSigned/compare that can return -1, 0, or 1 so we can cover all the comparison functions with a single call.
While I was there I removed the activeBits calls and other checks at the start of the slow part of ult. Both of the activeBits calls potentially scan through each of the APInts separately. I can't imagine that's any better than just scanning them in parallel and doing the compares. Now we just share the code with tcCompare.
These changes seem to be good for about a 7-8k reduction on the size of the opt binary on my local x86-64 build.
Differential Revision: https://reviews.llvm.org/D32339
llvm-svn: 300995
This should fix the bug https://bugs.llvm.org/show_bug.cgi?id=12906
To print the FP constant AsmWriter does the following:
1) convert FP value to String (actually using snprintf function which is locale dependent).
2) Convert String back to FP Value
3) Compare original and got FP values. If they are not equal just dump as hex.
The problem happens on the 2nd step when APFloat does not expect group delimiter or
fraction delimiter other than period symbol and so on, which can be produced on the
first step if LLVM library is used in an environment with corresponding locale set.
To fix this issue the locale independent APFloat:toString function is used.
However it prints FP values slightly differently than snprintf does. Specifically
it suppress trailing zeros in significant, use capital E and so on.
It results in 117 test failures during make check.
To avoid this I've also updated APFloat.toString a bit to pass make check at least.
Reviewers: sberg, bogner, majnemer, sanjoy, timshen, rnk
Reviewed By: timshen, rnk
Subscribers: rnk, llvm-commits
Differential Revision: https://reviews.llvm.org/D32276
llvm-svn: 300943
Associate the version-when-defined with definitions of standard DWARF
constants. Identify the "vendor" for DWARF extensions.
Use this information to verify FORMs in .debug_abbrev are defined as
of the DWARF version specified in the associated unit.
Removed two tests that had specified DWARF v1 (which essentially does
not exist).
Differential Revision: http://reviews.llvm.org/D30785
llvm-svn: 300875
This question comes up in many places in SimplifyDemandedBits. This makes it easy to ask without allocating additional temporary APInts.
The BitVector class provides a similar functionality through its (IMHO badly named) test(const BitVector&) method. Though its output polarity is reversed.
I've provided one example use case in this patch. I plan to do more as a follow up.
Differential Revision: https://reviews.llvm.org/D32258
llvm-svn: 300851
The hardware div feature refers only to Thumb, but because of its name
it is tempting to use it to check for hardware division in general,
which may cause problems in ARM mode. See https://reviews.llvm.org/D32005.
This patch adds "Thumb" to its name, to make its scope clear. One
notable place where I haven't made the change is in the feature flag
(used with -mattr), which is still hwdiv. Changing it would also require
changes in a lot of tests, including clang tests, and it doesn't seem
like it's worth the effort.
Differential Revision: https://reviews.llvm.org/D32160
llvm-svn: 300827
Summary: This is a simple question we should be able to answer without creating a temporary to hold the AND result. We can also get an early out as soon as we find a word that intersects.
Reviewers: RKSimon, hans, spatel, davide
Reviewed By: hans, davide
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D32253
llvm-svn: 300812
This fixes PR32471.
As comment 10 on that bug report highlights
(https://bugs.llvm.org//show_bug.cgi?id=32471#c10), there are quite a
few different defendable design tradeoffs that could be made, including
not representing pointers at all in LLT.
I decided to go for representing vector-of-pointer as a concept in LLT,
while keeping the size of the LLT type 64 bits (this is an increase from
48 bits before). My rationale for keeping pointers explicit is that on
some targets probably it's very handy to have the distinction between
pointer and non-pointer (e.g. 68K has a different register bank for
pointers IIRC). If we keep a scalar pointer, it probably is easiest to
also have a vector-of-pointers to keep LLT relatively conceptually clean
and orthogonal, while we don't have a very strong reason to break that
orthogonality. Once we gain more experience on the use of LLT, we can
of course reconsider this direction.
Rejecting vector-of-pointer types in the IRTranslator is also an option
to avoid the crash reported in PR32471, but that is only a very
short-term solution; also needs quite a bit of code tweaks in places,
and is probably fragile. Therefore I didn't consider this the best
option.
llvm-svn: 300664
Summary:
VersionPrinter by default outputs information about the Host CPU
and Default target. Printing this information requires linking in
a large amount of data, such as supported target triples as C
strings, which in turn bloats the binary size.
Enable a new CMake option LLVM_VERSION_PRINTER_SHOW_HOST_TARGET_INFO
which controls printing of the host and target info. This allows
the target triple names to be dead-code stripped. This is a nice
win for LLVM clients that wish to minimize their binary size, such
as graphics drivers.
By default this is ON, so there is no change in the default behavior.
Clients who wish to suppress this printing can do so by setting this
option to off via CMake.
A test app on Linux that uses ParseCommandLineOptions() shows a binary
size reduction of 23KB (from 149K to 126K) for a Release build, and 24KB
(from 135K to 111K) in a MinSizeRel build.
Reviewers: klimek, beanz, bogner, chandlerc, compnerd
Reviewed By: compnerd
Patch by pammon (Peter Ammon) !
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D30904
llvm-svn: 300630
This patch uses lshrInPlace to replace code where the object that lshr is called on is being overwritten with the result.
This adds an lshrInPlace(const APInt &) version as well.
Differential Revision: https://reviews.llvm.org/D32155
llvm-svn: 300566
This reverts r300535 and r300537.
The newly added tests in test/CodeGen/AArch64/GlobalISel/arm64-fallback.ll
produces slightly different code between LLVM versions being built with different compilers.
E.g., dependent on the compiler LLVM is built with, either one of the following
can be produced:
remark: <unknown>:0:0: unable to legalize instruction: %vreg0<def>(p0) = G_EXTRACT_VECTOR_ELT %vreg1, %vreg2; (in function: vector_of_pointers_extractelement)
remark: <unknown>:0:0: unable to legalize instruction: %vreg2<def>(p0) = G_EXTRACT_VECTOR_ELT %vreg1, %vreg0; (in function: vector_of_pointers_extractelement)
Non-determinism like this is clearly a bad thing, so reverting this until
I can find and fix the root cause of the non-determinism.
llvm-svn: 300538
This fixes PR32471.
As comment 10 on that bug report highlights
(https://bugs.llvm.org//show_bug.cgi?id=32471#c10), there are quite a
few different defendable design tradeoffs that could be made, including
not representing pointers at all in LLT.
I decided to go for representing vector-of-pointer as a concept in LLT,
while keeping the size of the LLT type 64 bits (this is an increase from
48 bits before). My rationale for keeping pointers explicit is that on
some targets probably it's very handy to have the distinction between
pointer and non-pointer (e.g. 68K has a different register bank for
pointers IIRC). If we keep a scalar pointer, it probably is easiest to
also have a vector-of-pointers to keep LLT relatively conceptually clean
and orthogonal, while we don't have a very strong reason to break that
orthogonality. Once we gain more experience on the use of LLT, we can
of course reconsider this direction.
Rejecting vector-of-pointer types in the IRTranslator is also an option
to avoid the crash reported in PR32471, but that is only a very
short-term solution; also needs quite a bit of code tweaks in places,
and is probably fragile. Therefore I didn't consider this the best
option.
llvm-svn: 300535
This merges the two different multiword shift right implementations into a single version located in tcShiftRight. lshrInPlace now calls tcShiftRight for the multiword case.
I retained the memmove fast path from lshrInPlace and used a memset for the zeroing. The for loop is basically tcShiftRight's implementation with the zeroing and the intra-shift of 0 removed.
Differential Revision: https://reviews.llvm.org/D32114
llvm-svn: 300503
This was throwing an assert because we determined the intra-word shift amount by subtracting the size of the full word shift from the total shift amount. But we failed to account for the fact that we clipped the full word shifts by total words first. To fix this just calculate the intra-word shift as the remainder of dividing by bits per word.
llvm-svn: 300405
The ErrorOr should not be dereferenced on the error path.
Patch by Jacob Young
Reviewers: tejohnson
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D32032
llvm-svn: 300267
Switch from Euclid's algorithm to Stein's algorithm for computing GCD. This
avoids the (expensive) APInt division operation in favour of bit operations.
Remove all memory allocation from within the GCD loop by tweaking our `lshr`
implementation so it can operate in-place.
Differential Revision: https://reviews.llvm.org/D31968
llvm-svn: 300252
Summary:
APInt is currently implemented with an unsigned BitWidth field first and then a uint_64/pointer union. Due to the 64-bit size of the union there is a hole after the bitwidth.
Putting the union first allows the class to be packed. Making it 12 bytes instead of 16 bytes. An APSInt goes from 20 bytes to 16 bytes.
This shows a 4k reduction on the size of the opt binary on my local x86-64 build. So this enables some other improvement to the code as well.
Reviewers: dblaikie, RKSimon, hans, davide
Reviewed By: davide
Subscribers: davide, llvm-commits
Differential Revision: https://reviews.llvm.org/D32001
llvm-svn: 300171
On FreeBSD backtrace is not part of libc and depends on libexecinfo
being available. Instead of using manual checks we can use the builtin
CMake module FindBacktrace.cmake to detect availability of backtrace()
in a portable way.
Patch By: Alex Richardson
Differential Revision: https://reviews.llvm.org/D27143
llvm-svn: 300062
This shares detection logic with ARM(32), since AArch64 capable CPUs may
also run in 32-bit system mode.
We observe weird /proc/cpuinfo output for MSM8992 and MSM8994, where
they report all CPU cores as one single model, depending on which CPU
core the kernel is running on. As a workaround, we hardcode the known
CPU part name for these SoCs.
For big.LITTLE systems, this patch would only return the part name of
the first core (usually the little core). Proper support will be added
in a follow-up change.
Differential Revision: D31675
llvm-svn: 299458
This patch is one step to attempt to unify the main APInt interface and the tc functions used by APFloat.
This patch adds a WordType to APInt and uses that in all the tc functions. I've added temporary typedefs to APFloat to alias it to integerPart to keep the patch size down. I'll work on removing that in a future patch.
In future patches I hope to reuse the tc functions to implement some of the main APInt functionality.
I may remove APINT_ from BITS_PER_WORD and WORD_SIZE constants so that we don't have the repetitive APInt::APINT_ externally.
Differential Revision: https://reviews.llvm.org/D31523
llvm-svn: 299341
Summary:
GreatestComonDivisor currently makes a copy of both its inputs. Then in the loop we do one move and two copies, plus any allocation the urem call does.
This patch changes it to take its inputs by value so that we can do a move of any rvalue inputs instead of copying. Then in the loop we do 3 move assignments and no copies. This way the only possible allocations we have in the loop is from the urem call.
Reviewers: dblaikie, RKSimon, hans
Reviewed By: dblaikie
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D31572
llvm-svn: 299314
We do not want to close STDOUT as there may have been several uses of it
such as the case: llc %s -o=- -pass-remarks-output=- -filetype=asm
which cause multiple closes of STDOUT_FILENO and/or use-after-close of it.
Using dup() in getFD doesn't work as we end up with original STDOUT_FILENO
open anyhow.
reviewed by Rafael Espindola
Differential Revision: https://reviews.llvm.org/D31505
llvm-svn: 299098
This reverts r299062, which caused build failures on Windows.
It also reverts the attempts to fix the windows builds in r299064 and r299065.
The introduction of namespace llvm::sys::detail makes MSVC, and seemingly also
mingw, complain about ambiguity with the existing namespace llvm::detail.
E.g.:
C:\b\slave\sanitizer-windows\llvm\include\llvm/Support/MathExtras.h(184): error C2872: 'detail': ambiguous symbol
C:\b\slave\sanitizer-windows\llvm\include\llvm/Support/PointerLikeTypeTraits.h(31): note: could be 'llvm::detail'
C:\b\slave\sanitizer-windows\llvm\include\llvm/Support/Host.h(80): note: or 'llvm::sys::detail'
In r299064 and r299065 I tried to fix these ambiguities, based on the errors
reported in the log files. It seems however that the build stops early when
this kind of error is encountered, and many build-then-fix-iterations on
Windows may be needed to fix this. Therefore reverting r299062 for now to
get the build working again on Windows.
llvm-svn: 299066
This refactors getHostCPUName so that for the architectures that get the
host cpu info on linux from /proc/cpuinfo, the /proc/cpuinfo parsing
logic is present in the build, even if it wasn't built on a linux system
for that architecture.
Since the code is present in the build, we can then test that code also
on other systems, i.e. we don't need to have buildbots setup for all
architectures on linux to be able to test this. Instead, developers will
test this as part of the regression test run.
As an example, a few unit tests are added to test getHostCPUName for ARM
running linux. A unit test is preferred over a lit-based test, since the
expectation is that in the future, the functionality here will grow over
what can be tested with "llc -mcpu=native".
This is a preparation step to enable implementing the range of
improvements discussed on PR30516, such as adding AArch64 support,
support for big.LITTLE systems, reducing code duplication.
Differential Revision: https://reviews.llvm.org/D31236
llvm-svn: 299060
Several static functions from the signal API can be invoked
simultaneously; RemoveFileOnSignal for instance can be called indirectly
by multiple parallel loadModule() invocations, which might lead to
the assertion:
Assertion failed: (NumRegisteredSignals < array_lengthof(RegisteredSignalInfo) && "Out of space for signal handlers!"),
function RegisterHandler, file /llvm/lib/Support/Unix/Signals.inc, line 105.
RemoveFileOnSignal calls RegisterHandlers(), which isn't currently
mutex protected, leading to the behavior above. This potentially affect
a few other users of RegisterHandlers() too.
rdar://problem/30381224
llvm-svn: 298871
This method is pretty new and probably isn't use much in the code base so this should have a negligible size impact. The OR and XOR operators are already inline.
llvm-svn: 298870
Summary:
It should return <0, 0, or >0 for less-than, equal, and greater-than like
strcmp() (according to the history, it used to be implemented with
strcmp()) but it actually returned 0, or 1 for not-equal and equal.
Reviewers: qcolombet
Reviewed By: qcolombet
Subscribers: qcolombet, llvm-commits
Differential Revision: https://reviews.llvm.org/D30996
llvm-svn: 298844
This is something of an edge case, but when the $HOME environment
variable is not set, we can still look in the password database
to get the current user's home directory.
Added a test for this by getting the value of $HOME, then unsetting
it, then calling home_directory() and verifying that it succeeds
and that the value is the same as what we originally read from
the environment.
llvm-svn: 298513
In doing so, clean up the MD5 interface a little. Most
existing users only care about the lower 8 bytes of an MD5,
but for some users that care about the upper and lower,
there wasn't a good interface. Furthermore, consumers
of the MD5 checksum were required to handle endianness
details on their own, so it seems reasonable to abstract
this into a nicer interface that just gives you the right
value.
Differential Revision: https://reviews.llvm.org/D31105
llvm-svn: 298322
This is a safeguard against data loss if the user specifies a directory
that is not a cache directory. Teach the existing cache pruning clients
to create files with appropriate names.
Differential Revision: https://reviews.llvm.org/D31109
llvm-svn: 298271
I'm not sure if zeroing VAL before writing pVal is really necessary, but at least one other place did it in code.
But by taking the store out of line, this reduces the opt binary by about 20k on my local x86-64 build.
llvm-svn: 298233
Go back to behavior pre-r231309 and reduce the timeout from 8 to ~1.5
min now that we have (a) PCMCache mechanism (r298165) and (b) timeout
that doesn't cause a failure, but actually build the module (r298175).
rdar://problem/30297862
llvm-svn: 298176
Previously which path syntax we supported dependend on what
platform we were compiling LLVM on. While this is normally
desirable, there are situations where we need to be able to
handle a path that we know was generated on a remote host.
Remote debugging, for example, or parsing debug info.
99% of the code in LLVM for handling paths was platform
agnostic and literally just a few branches were gated behind
pre-processor checks, so this changes those sites to use
runtime checks instead, and adds a flag to every path
API that allows one to override the host native syntax.
Differential Revision: https://reviews.llvm.org/D30858
llvm-svn: 298004
This change adds support for functions to set and get file permissions, in a similar manner to the C++17 permissions() function in <filesystem>. The setter uses chmod on Unix systems and SetFileAttributes on Windows, setting the permissions as passed in. The getter simply uses the existing status() function.
Prior to this change, status() would always return an unknown value for the permissions on a Windows file, making it impossible to test the new function on Windows. I have therefore added support for this as well. On Linux, prior to this change, the permissions included the file type, which should actually be accessed via a different member of the file_status class.
Note that on Windows, only the *_write permission bits have any affect - if any are set, the file is writable, and if not, the file is read-only. This is in common with what MSDN describes for their behaviour of std::filesystem::permissions(), and also what boost::filesystem does.
The motivation behind this change is so that we can easily test behaviour on read-only files in LLVM unit tests, but I am sure that others may find it useful in some situations.
Reviewers: zturner, amccarth, aaron.ballman
Differential Revision: https://reviews.llvm.org/D30736
llvm-svn: 297945
The idea is that the policy string fully specifies the policy and is portable
between clients.
Differential Revision: https://reviews.llvm.org/D31020
llvm-svn: 297927
Change the function that implements the pruning into a free function that
takes the policy as a struct argument.
Differential Revision: https://reviews.llvm.org/D31009
llvm-svn: 297907
Previously we did not have support for writing detailed
module information for each module, as well as the symbol
records. This patch adds support for this, and in doing
so enables the ability to construct minimal PDBs from
just a few lines of YAML. A test is added to illustrate
this functionality.
llvm-svn: 297900
Previously, if you attempted to write a key/value pair and the
value was equal to the key's default value, we would not output
the value. Sometimes it is useful to be able to see this value
in the output anyway.
llvm-svn: 297864
Summary:
Previously, ParseCommandLineOptions returns false and ignores error messages
when IgnoreErrors. It would be useful to also return error messages if users
decide to check parsing result instead of having the program exit on error.
Reviewers: chandlerc, mehdi_amini, rnk
Reviewed By: rnk
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D30893
llvm-svn: 297810
Previously, it created a temporary directory and then failed when
FileOutputBuffer tried to rename that file to the destination file
(which is actually a directory name).
Differential Revision: https://reviews.llvm.org/D30912
llvm-svn: 297679
If raw_fd_ostream is constructed with the path of "-", it claims
ownership of the stdout file descriptor. This means that it closes
stdout when it is destroyed. If there are multiple users of
raw_fd_ostream wrapped around stdout, then a crash can occur because
of operations on a closed stream.
An example of this would be running something like "clang -S -o - -MD
-MF - test.cpp". Alternatively, using outs() (which creates a local
version of raw_fd_stream to stdout) anywhere combined with such a
stream usage would cause the crash.
The fix duplicates the stdout file descriptor when used within
raw_fd_ostream, so that only that particular descriptor is closed when
the stream is destroyed.
Patch by James Henderson!
llvm-svn: 297624
In openFileForRead, we would not previously return an error
if real_path resolution failed. After a recent patch, we
started propagating this error up. This caused a failure
in clang when trying to call openFileForRead("nul"). This
patch restores the previous behavior of not propagating this
error up.
llvm-svn: 297488
LLVM already has real_path like functionality, but it is
cumbersome to use and involves clean up after (e.g. you have
to call openFileForRead, then close the resulting FD).
Furthermore, on Windows it doesn't work for directories since
opening a directory and opening a file require slightly
different flags.
So I add a simple function `real_path` which works for all
paths on all platforms and has a simple to use interface.
In doing so, I add the ability to opt in to resolving tilde
expressions (e.g. ~/foo), which are normally handled by
the shell.
Differential Revision: https://reviews.llvm.org/D30668
llvm-svn: 297483
We currently have to insert bits via a temporary variable of the same size as the target with various shift/mask stages, resulting in further temporary variables, all of which require the allocation of memory for large APInts (MaskSizeInBits > 64).
This is another of the compile time issues identified in PR32037 (see also D30265).
This patch adds the APInt::insertBits() helper method which avoids the temporary memory allocation and masks/inserts the raw bits directly into the target.
Differential Revision: https://reviews.llvm.org/D30780
llvm-svn: 297458
We already have a function create_directories() which can create
an entire tree, and remove() which can remove an empty directory,
but we do not have remove_directories() which can remove an entire
tree. This patch adds such a function.
Because removing a directory tree can have dangerous consequences
when the tree contains a directory symlink, the patch here updates
the existing directory_iterator construct to optionally not follow
symlinks (previously it would always follow symlinks). The delete
algorithm uses this flag so that for symlinks, only the links are
removed, and not the targets.
On Windows this is implemented with SHFileOperation, which also
does not recurse into symbolic links or junctions.
Differential Revision: https://reviews.llvm.org/D30676
llvm-svn: 297314
This was originall reverted due to some test failures in
ModuleCache and TestCompDirSymlink. These issues have all
been resolved and the code now passes all tests.
Differential Revision: https://reviews.llvm.org/D30698
llvm-svn: 297300
Summary:
This will allow future patches to inspect the details of the LLT. The implementation is now split between
the Support and CodeGen libraries to allow TableGen to use this class without introducing layering concerns.
Thanks to Ahmed Bougacha for finding a reasonable way to avoid the layering issue and providing the version of this patch without that problem.
The problem with the previous commit appears to have been that TableGen was including CodeGen/LowLevelType.h instead of Support/LowLevelTypeImpl.h.
Reviewers: t.p.northover, qcolombet, rovka, aditya_nandakumar, ab, javed.absar
Subscribers: arsenm, nhaehnle, mgorny, dberris, llvm-commits, kristof.beyls
Differential Revision: https://reviews.llvm.org/D30046
llvm-svn: 297241
Move the __try/__except block outside of the set_thread_name function to avoid a conflict with object unwinding due to the use of the llvm::Storage.
Differential Revision: https://reviews.llvm.org/D30707
llvm-svn: 297192
More module problems. This time it only showed up in the stage 2 compile of
clang-x86_64-linux-selfhost-modules-2 but not the stage 1 compile.
Somehow, this change causes the build to need Attributes.gen before it's been
generated.
llvm-svn: 297188
Summary:
This will allow future patches to inspect the details of the LLT. The implementation is now split between
the Support and CodeGen libraries to allow TableGen to use this class without introducing layering concerns.
Thanks to Ahmed Bougacha for finding a reasonable way to avoid the layering issue and providing the version of this patch without that problem.
Reviewers: t.p.northover, qcolombet, rovka, aditya_nandakumar, ab, javed.absar
Subscribers: arsenm, nhaehnle, mgorny, dberris, llvm-commits, kristof.beyls
Differential Revision: https://reviews.llvm.org/D30046
llvm-svn: 297177
This extends an earlier change that did similar for add and sub operations.
With this first patch we lose the fastpath for the single word case as operator&= and friends don't support it. This can be added there if we think that's important.
I had to change some functions in the APInt class since the operator overloads were moved out of the class and can't be used inside the class now. The getBitsSet change collides with another outstanding patch to implement it with setBits. But I didn't want to make this patch dependent on that series.
I've also removed the Or, And, Xor functions which were rarely or never used. I already commited two changes to remove the only uses of Or that existed.
Differential Revision: https://reviews.llvm.org/D30612
llvm-svn: 297121
This deletes LLDB's FileType enumeration and replaces all
users, and all calls to functions that check whether a file
exists etc with corresponding calls to LLVM.
Differential Revision: https://reviews.llvm.org/D30624
llvm-svn: 297116
Summary:
There are quite a few places in the code base that do something like the following to set the high or low bits in an APInt.
KnownZero |= APInt::getHighBitsSet(BitWidth, BitWidth - 1);
For BitWidths larger than 64 this creates a short lived APInt with malloced storage. I think it might even call malloc twice. Its better to just provide methods that can set the necessary bits without the temporary APInt.
I'll update usages that benefit in a separate patch.
Reviewers: majnemer, MatzeB, davide, RKSimon, hans
Reviewed By: hans
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D30525
llvm-svn: 297111
Do not include <sys/user.h> on NetBSD. It's dead file and will be removed.
No need to include <sys/sysctl.h> in this code context on NetBSD.
llvm-svn: 296973
pthread_self() returns a pthread_t, but we were setting it to
an int. It seems the cast to int when calling sysctl is still
the correct thing to do, though.
llvm-svn: 296892
Doing so defines the type llvm::thread. On FreeBSD, we need
to call a macro which references its own ::thread type, which
causes an ambiguity due to ADL when inside of the llvm namespace.
Since we don't even need this unless LLVM_ENABLE_THREADS == 1,
we don't even need this type anyway, as it is always equal to
std::thread, so we can just use that directly.
llvm-svn: 296891
Applications often need the current thread id when making
system calls, and some operating systems provide the notion
of a thread name, which can be useful in enabling better
diagnostics when debugging or logging.
This patch adds an accessor for the thread id, and "best effort"
getters and setters for the thread name. Since this is
non critical functionality, no error is returned to indicate
that a platform doesn't support thread names.
Differential Revision: https://reviews.llvm.org/D30526
llvm-svn: 296887
After several smaller patches to get most of the core improvements
finished up, this patch is a straight move and header fixup of
the source.
Differential Revision: https://reviews.llvm.org/D30266
llvm-svn: 296810
Original commit message:
"Allow externally dlopen-ed libraries to be registered as permanent libraries.
This is also useful in cases when llvm is in a shared library. First we dlopen
the llvm shared library and then we register it as a permanent library in order
to keep the JIT and other services working.
Patch reviewed by Vedant Kumar (D29955)!"
llvm-svn: 296774
Summary:
This patch moves the clearUnusedBits calls into the two different initialization paths for APInt from a uint64_t. This allows the compiler to better optimize the clearing of the unused bits for the single word case. And it puts the clearing for the multi word case into the initSlowCase function to save code. In the common case of initializing with 0 this allows the clearing to be completely optimized out for the single word case.
On my local x86 build this is showing a ~45kb reduction in the size of the opt binary.
Reviewers: RKSimon, hans, majnemer, davide, MatzeB
Reviewed By: hans
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D30486
llvm-svn: 296677
Windows does not treat `~` as a reference to home directory, so the call
to `llvm::sys::path::native` on, say, `~/somedir` produces `~\somedir`,
which has different meaning than the original path. With this change
tilde is expanded on Windows to user profile directory. Such behavior
keeps original meaning of the path and is consistent with the algorithm
of `llvm::sys::path::home_directory`.
Differential Revision: https://reviews.llvm.org/D27527
llvm-svn: 296590
Requesting DWARF v5 will now get you the new compile-unit and
type-unit headers. llvm-dwarfdump will also recognize them.
Differential Revision: http://reviews.llvm.org/D30206
llvm-svn: 296514
Summary:
This will allow future patches to inspect the details of the LLT. The implementation is now split between
the Support and CodeGen libraries to allow TableGen to use this class without introducing layering concerns.
Thanks to Ahmed Bougacha for finding a reasonable way to avoid the layering issue and providing the version of this patch without that problem.
Reviewers: t.p.northover, qcolombet, rovka, aditya_nandakumar, ab, javed.absar
Subscribers: arsenm, nhaehnle, mgorny, dberris, llvm-commits, kristof.beyls
Differential Revision: https://reviews.llvm.org/D30046
llvm-svn: 296474
This is also useful in cases when llvm is in a shared library. First we dlopen
the llvm shared library and then we register it as a permanent library in order
to keep the JIT and other services working.
Patch reviewed by Vedant Kumar (D29955)!
llvm-svn: 296442
The current pattern for extract bits in range is typically:
Mask.lshr(BitOffset).trunc(SubSizeInBits);
Which can be particularly slow for large APInts (MaskSizeInBits > 64) as they require the allocation of memory for the temporary variable.
This is another of the compile time issues identified in PR32037 (see also D30265).
This patch adds the APInt::extractBits() helper method which avoids the temporary memory allocation.
Differential Revision: https://reviews.llvm.org/D30336
llvm-svn: 296272
The current pattern for extract bits in range is typically:
Mask.lshr(BitOffset).trunc(SubSizeInBits);
Which can be particularly slow for large APInts (MaskSizeInBits > 64) as they require the allocation of memory for the temporary variable.
This is another of the compile time issues identified in PR32037 (see also D30265).
This patch adds the APInt::extractBits() helper method which avoids the temporary memory allocation.
Differential Revision: https://reviews.llvm.org/D30336
llvm-svn: 296147
The current pattern for extract bits in range is typically:
Mask.lshr(BitOffset).trunc(SubSizeInBits);
Which can be particularly slow for large APInts (MaskSizeInBits > 64) as they require the allocation of memory for the temporary variable.
This is another of the compile time issues identified in PR32037 (see also D30265).
This patch adds the APInt::extractBits() helper method which avoids the temporary memory allocation.
Differential Revision: https://reviews.llvm.org/D30336
llvm-svn: 296141
The current pattern for setting bits in range is typically:
Mask |= APInt::getBitsSet(MaskSizeInBits, LoPos, HiPos);
Which can be particularly slow for large APInts (MaskSizeInBits > 64) as they require the allocation memory for the temporary variable.
This is one of the key compile time issues identified in PR32037.
This patch adds the APInt::setBits() helper method which avoids the temporary memory allocation completely, this first implementation uses setBit() internally instead but already significantly reduces the regression in PR32037 (~10% drop). Additional optimization may be possible.
I investigated whether there is need for APInt::clearBits() and APInt::flipBits() equivalents but haven't seen these patterns to be particularly common, but reusing the code would be trivial.
Differential Revision: https://reviews.llvm.org/D30265
llvm-svn: 296102
The function for distinguishing local and remote files added in r295768
unconditionally uses linux/magic.h header to provide necessary
filesystem magic numbers. However, in kernel headers predating 2.6.18
the magic numbers are spread throughout multiple include files.
Furthermore, LLVM did not require kernel headers being installed so far.
To increase the portability across different versions of Linux kernel
and different Linux systems, add CMake header checks for linux/magic.h
and -- if it is missing -- the linux/nfs_fs.h and linux/smb.h headers
which contained the numbers previously.
Furthermore, since the numbers are static and the feature does not seem
critical enough to make LLVM require kernel headers at all, add fallback
constants for the case when none of the necessary headers is available.
Differential Revision: https://reviews.llvm.org/D30261
llvm-svn: 295854
Since I'm only seeing failures on OSX, and it's saying
permission denied, I'm suspecting this is due to the addition
of the MAP_RESILIENT_CODESIGN and/or MAP_RESILIENT_MEDIA flags.
Speculatively trying to remove those to get the bots working.
llvm-svn: 295770
There are still over 3400 files remaining with this property set, but there are tens of thousands more with the property not set. Until we decide what to do on a global scale, this at least unblocks me temporarily.
llvm-svn: 295756
Summary:
We have support for bisection, and bugpoint can reduce testcases
often to a single pass. But that doesn't help reduce it to a single
transform by a single pass. Which debug counting lets us do.
Debug counting lets you instrument a pass so that it only executes a
certain thing (rwhatever you want) after skipping it a certain time of
times, and then only does a certain number of executions before saying
"skip" again.
To make it concrete, for predicateinfo, if i instrument use renaming,
i can make it so it skips renaming the first N uses, renames the next
N, and then skips the rest.
This lets you narrow down a miscompilation to, often, a single
transformation, and then also debug it (by using the same command line
parameters).
Reviewers: chandlerc, davide, mehdi_amini
Subscribers: mgorny, llvm-commits
Differential Revision: https://reviews.llvm.org/D29998
llvm-svn: 295593
This set of patches adds support for Cavium ThunderX ARM64 processors:
* ThunderX
* ThunderX T81
* ThunderX T83
* ThunderX T88
Patch by Stefan Teleman
Differential Revision: https://reviews.llvm.org/D28891
llvm-svn: 295475
TimerGroup was showing up on a leak in valigrind, and
used some pretty complex code to implement a singleton.
This patch replaces the implementation with a vastly simpler
one.
Differential Revision: https://reviews.llvm.org/D28367
llvm-svn: 295370
LLVM defines `PTHREAD_LIB` which is used by AddLLVM.cmake and various projects
to correctly link the threading library when needed. Unfortunately
`PTHREAD_LIB` is defined by LLVM's `config-ix.cmake` file which isn't installed
and therefore can't be used when configuring out-of-tree builds. This causes
such builds to fail since `pthread` isn't being correctly linked.
This patch attempts to fix that problem by renaming and exporting
`LLVM_PTHREAD_LIB` as part of`LLVMConfig.cmake`. I renamed `PTHREAD_LIB`
because It seemed likely to cause collisions with downstream users of
`LLVMConfig.cmake`.
llvm-svn: 294690
Gcc supports target armv7ve which is armv7-a with virtualization
extensions. This change adds support for this in llvm for gcc
compatibility.
Also remove redundant FeatureHWDiv, FeatureHWDivARM for a few models as
this is specified automatically by FeatureVirtualization.
Patch by Manoj Gupta.
Differential Revision: https://reviews.llvm.org/D29472
llvm-svn: 294661
We only implemented it for one of the 3 HLE instructions and that instruction is also under the RTM flag. Clang only implements the RTM flag from its command line.
llvm-svn: 294562
This patch does the following.
1. Adds an Intrinsic int_x86_clzero which works with __builtin_ia32_clzero
2. Identifies clzero feature using cpuid info. (Function:8000_0008, Checks if EBX[0]=1)
3. Adds the clzero feature under znver1 architecture.
4. The custom inserter is added in Lowering.
5. A testcase is added to check the intrinsic.
6. The clzero instruction is added to assembler test.
Patch by Ganesh Gopalasubramanian with a couple formatting tweaks, a disassembler test, and using update_llc_test.py from me.
Differential revision: https://reviews.llvm.org/D29385
llvm-svn: 294558
Summary:
The formatter has three knobs:
- the user can choose which time unit to use for formatting (default: whatever is the unit of the input)
- he can choose whether the unit gets displayed (default: yes)
- he can affect the way the number itself is formatted via standard number formatting options (default:default)
Reviewers: zturner, inglorion
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D29481
llvm-svn: 294326
Summary:
Make this interface reusable similarly to std::call_once and std::once_flag interface.
This makes porting LLDB to NetBSD easier as there was in the original approach a portable way to specify a non-static once_flag. With this change translating std::once_flag to llvm::once_flag is mechanical.
Sponsored by <The NetBSD Foundation>
Reviewers: mehdi_amini, labath, joerg
Reviewed By: mehdi_amini
Subscribers: emaste, clayborg
Differential Revision: https://reviews.llvm.org/D29566
llvm-svn: 294143
Summary: As per title. I ran into that limitation of the API doing some other work, so I though that'd be a nice addition.
Reviewers: jroelofs, compnerd, majnemer
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D29503
llvm-svn: 294063
Committing after fixing suggested changes and tested release/debug builds on
x86_64-linux and arm/aarch64 builds.
Differential revision: https://reviews.llvm.org/D29042
llvm-svn: 293850
Ben Dunbobbin