We need a frame pointer if there is a push/pop sequence after the
prologue in order to unwind the stack. Scanning the instructions to
figure out if this happened made hasFP not constant-time which is a
violation of expectations. Let's compute this up-front and reuse that
computation when we need it.
llvm-svn: 256730
A frame pointer must be used if stack pointer is modified after the
prologue. LLVM will emit pushf/popf if we need to save/restore the
FLAGS register, requiring us to have a frame pointer for the function.
There is a small twist: this sequence might exist in user code via
inline-assembly. For now, conservatively assume that such functions
require a frame pointer. For real world justification, please see
clang's implementation of __readeflags.
This fixes PR25945.
llvm-svn: 256456
The patterns that set a mask register to 0/1
KXOR %kn, %kn, %kn / KXNOR %kn, %kn, %kn
are replaced with
KXOR %k0, %k0, %kn / KXNOR %k0, %k0, %kn - AVX-512 targets optimization.
KNL does not recognize dependency-breaking idioms for mask registers,
so kxnor %k1, %k1, %k2 has a RAW dependence on %k1.
Using %k0 as the undef input register is a performance heuristic based
on the assumption that %k0 is used less frequently than the other mask
registers, since it is not usable as a write mask.
Differential Revision: http://reviews.llvm.org/D15739
llvm-svn: 256365
Use the 3-byte (4 with REX prefix) push-pop sequence for materializing
small constants. This is smaller than using a mov (5, 6 or 7 bytes
depending on size and REX prefix), but it's likely to be slower, so
only used for 'minsize'.
This is a follow-up to r255656.
Differential Revision: http://reviews.llvm.org/D15549
llvm-svn: 255936
"movl $-1, %eax" is 5 bytes, "xorl %eax, %eax; decl %eax" is 3 bytes.
This commit makes LLVM use the latter when optimizing for size.
Differential Revision: http://reviews.llvm.org/D14971
llvm-svn: 255656
computeRegisterLiveness() was broken in that it reported dead for a
register even if a subregister was alive. I assume this was because the
results of analayzePhysRegs() are hard to understand with respect to
subregisters.
This commit: Changes the results of analyzePhysRegs (=struct
PhysRegInfo) to be clearly understandable, also renames the fields to
avoid silent breakage of third-party code (and improve the grammar).
Fix all (two) users of computeRegisterLiveness() in llvm: By reenabling
it and removing workarounds for the bug.
This fixes http://llvm.org/PR24535 and http://llvm.org/PR25033
Differential Revision: http://reviews.llvm.org/D15320
llvm-svn: 255362
These instructions are not supported by all CPUs in 64-bit mode. Emitting them
causes Chromium to crash on start-up for users with such chips.
(GCC puts these instructions behind -msahf on 64-bit for the same reason.)
This patch adds FeatureLAHFSAHF, enables it by default for 32-bit targets
and modern CPUs, and changes X86InstrInfo::copyPhysReg back to the lowering
from before r244503 when the instructions are not available.
Differential Revision: http://reviews.llvm.org/D15240
llvm-svn: 254793
Summary:
computeRegisterLiveness and analyzePhysReg are currently getting
confused about liveness in some cases, breaking copyPhysReg's
calculation of whether AX is dead in some cases. Work around this issue
temporarily by assuming that AX is always live.
See detail in: https://llvm.org/bugs/show_bug.cgi?id=25033#c7
And associated bugs PR24535 PR25033 PR24991 PR24992 PR25201.
This workaround makes the code correct but slightly inefficient, but it
seems to confuse the machine instr verifier which now things EAX was
undefined in some cases where it's being conservatively saved /
restored.
Reviewers: majnemer, sanjoy
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D15198
llvm-svn: 254680
generated for _mm_losd_s{s,d}() intrinsics and used in scalar FMAs generated
for FMA intrinsics _mm_f{madd,msub,nmadd,nmsub}_s{s,d}().
Reviewer: David Kreitzer
Differential Revision: http://reviews.llvm.org/D14762
llvm-svn: 254140
We had duplicated definitions for the same hardware '[v]movq' instructions. For example with SSE:
def MOVZQI2PQIrr : RS2I<0x6E, MRMSrcReg, (outs VR128:$dst), (ins GR64:$src),
"mov{d|q}\t{$src, $dst|$dst, $src}", // X86-64 only
[(set VR128:$dst, (v2i64 (X86vzmovl (v2i64 (scalar_to_vector GR64:$src)))))],
IIC_SSE_MOVDQ>;
def MOV64toPQIrr : RS2I<0x6E, MRMSrcReg, (outs VR128:$dst), (ins GR64:$src),
"mov{d|q}\t{$src, $dst|$dst, $src}",
[(set VR128:$dst, (v2i64 (scalar_to_vector GR64:$src)))],
IIC_SSE_MOVDQ>, Sched<[WriteMove]>;
As shown in the test case and PR25554:
https://llvm.org/bugs/show_bug.cgi?id=25554
This causes us to miss reusing an operand because later passes don't know these 'movq' are the same instruction.
This patch deletes one pair of these defs.
Sadly, this won't fix the original test case in the bug report. Something else is still broken.
Differential Revision: http://reviews.llvm.org/D14941
llvm-svn: 253988
Copying one mask register to another under BW should be done with kmovq instruction, otherwise we can loose some bits.
Copying 8 bits under DQ may be done with kmovb.
Differential Revision: http://reviews.llvm.org/D14812
llvm-svn: 253563
It made it possible to apply the memory folding optimization for the 2nd
operand of FMA*_Int instructions.
Reviewer: Quentin Colombet
Differential Revision: http://reviews.llvm.org/D14550
llvm-svn: 252973
All 3 operands of FMA3 instructions are commutable now.
Patch by Slava Klochkov
Reviewers: Quentin Colombet(qcolombet), Ahmed Bougacha(ab).
Differential Revision: http://reviews.llvm.org/D13269
llvm-svn: 252335
This patch improves the memory folding of the inserted float element for the (V)INSERTPS instruction.
The existing implementation occurs in the DAGCombiner and relies on the narrowing of a whole vector load into a scalar load (and then converted into a vector) to (hopefully) allow folding to occur later on. Not only has this proven problematic for debug builds, it also prevents other memory folds (notably stack reloads) from happening.
This patch removes the old implementation and moves the folding code to the X86 foldMemoryOperand handler. A new private 'special case' function - foldMemoryOperandCustom - has been added to deal with memory folding of instructions that can't just use the lookup tables - (V)INSERTPS is the first of several that could be done.
It also tweaks the memory operand folding code with an additional pointer offset that allows existing memory addresses to be modified, in this case to convert the vector address to the explicit address of the scalar element that will be inserted.
Unlike the previous implementation we now set the insertion source index to zero, although this is ignored for the (V)INSERTPSrm version, anything that relied on shuffle decodes (such as unfolding of insertps loads) was incorrectly calculating the source address - I've added a test for this at insertps-unfold-load-bug.ll
Differential Revision: http://reviews.llvm.org/D13988
llvm-svn: 252074
Patch by Slava Klochkov
The key difference between FMA* and FMA*_Int opcodes is that FMA*_Int opcodes are handled more conservatively. It is illegal to commute the 1st operand of FMA*_Int instructions as the upper bits of scalar FMA intrinsic result must be taken from the 1st operand, but such commute transformation would change those upper bits and invalidate the intrinsic's result.
Reviewers: Quentin Colombet, Elena Demikhovsky
Differential Revision: http://reviews.llvm.org/D13710
llvm-svn: 252060
Catchret transfers control from a catch funclet to an earlier funclet.
However, it is not completely clear which funclet the catchret target is
part of. Make this clear by stapling the catchret target's funclet
membership onto the CATCHRET SDAG node.
llvm-svn: 249052
AVX-512 does not provide an instruction that shuffles mask register. So I do the following way:
mask-2-simd , shuffle simd , simd-2-mask
Differential Revision: http://reviews.llvm.org/D12727
llvm-svn: 247876
The changes in:
test/CodeGen/X86/machine-cp.ll
are just due to scheduling differences after some logic instructions were reassociated.
llvm-svn: 247516
This takes the existing static function hasLiveCondCodeDef and makes it a member function of the X86InstrInfo class. This is a useful utility function that an upcoming change would like to use. NFC.
Patch by: Kevin B. Smith
Differential Revision: http://reviews.llvm.org/D12371
llvm-svn: 246073
This is a 'no functional change intended' patch. It removes one FIXME, but adds several more.
Motivation: the FeatureFastUAMem attribute may be too general. It is used to determine if any
sized misaligned memory access under 32-bytes is 'fast'. From the added FIXME comments, however,
you can see that we're not consistent about this. Changing the name of the attribute makes it
clearer to see the logic holes.
Changing this to a 'slow' attribute also means we don't have to add an explicit 'fast' attribute
to new chips; fast unaligned accesses have been standard for several generations of CPUs now.
Differential Revision: http://reviews.llvm.org/D12154
llvm-svn: 245729
This commit removes the global manager variable which is responsible for
storing and allocating pseudo source values and instead it introduces a new
manager class named 'PseudoSourceValueManager'. Machine functions now own an
instance of the pseudo source value manager class.
This commit also modifies the 'get...' methods in the 'MachinePointerInfo'
class to construct pseudo source values using the instance of the pseudo
source value manager object from the machine function.
This commit updates calls to the 'get...' methods from the 'MachinePointerInfo'
class in a lot of different files because those calls now need to pass in a
reference to a machine function to those methods.
This change will make it easier to serialize pseudo source values as it will
enable me to transform the mips specific MipsCallEntry PseudoSourceValue
subclass into two target independent subclasses.
Reviewers: Akira Hatanaka
llvm-svn: 244693
NaCl's sandbox doesn't allow PUSHF/POPF out of security concerns (priviledged emulators have forgotten to mask system bits in the past, and EFLAGS's DF bit is a constant source of hilarity). Commit r220529 fixed PR20376 by saving cmpxchg's flags result using EFLAGS, this commit now generated LAHF/SAHF instead, for all of x86 (not just NaCl) because it leads to an overall performance gain over PUSHF/POPF.
As with the previous patch this code generation is pretty bad because it occurs very later, after register allocation, and in many cases it rematerializes flags which were already available (e.g. already in a register through SETE). Fortunately it's somewhat rare that this code needs to fire.
I did [[ https://github.com/jfbastien/benchmark-x86-flags | a bit of benchmarking ]], the results on an Intel Haswell E5-2690 CPU at 2.9GHz are:
| Time per call (ms) | Runtime (ms) | Benchmark |
| 0.000012514 | 6257 | sete.i386 |
| 0.000012810 | 6405 | sete.i386-fast |
| 0.000010456 | 5228 | sete.x86-64 |
| 0.000010496 | 5248 | sete.x86-64-fast |
| 0.000012906 | 6453 | lahf-sahf.i386 |
| 0.000013236 | 6618 | lahf-sahf.i386-fast |
| 0.000010580 | 5290 | lahf-sahf.x86-64 |
| 0.000010304 | 5152 | lahf-sahf.x86-64-fast |
| 0.000028056 | 14028 | pushf-popf.i386 |
| 0.000027160 | 13580 | pushf-popf.i386-fast |
| 0.000023810 | 11905 | pushf-popf.x86-64 |
| 0.000026468 | 13234 | pushf-popf.x86-64-fast |
Clearly `PUSHF`/`POPF` are suboptimal. It doesn't really seems to be worth teaching LLVM about individual flags, at least not for this purpose.
Reviewers: rnk, jvoung, t.p.northover
Subscribers: llvm-commits
Differential revision: http://reviews.llvm.org/D6629
llvm-svn: 244503
This commit implements the initial serialization of the machine operand target
flags. It extends the 'TargetInstrInfo' class to add two new methods that help
to provide text based serialization for the target flags.
This commit can serialize only the X86 target flags, and the target flags for
the other targets will be serialized in the follow-up commits.
Reviewers: Duncan P. N. Exon Smith
llvm-svn: 244185
Create wrapper methods in the Function class for the OptimizeForSize and MinSize
attributes. We want to hide the logic of "or'ing" them together when optimizing
just for size (-Os).
Currently, we are not consistent about this and rely on a front-end to always set
OptimizeForSize (-Os) if MinSize (-Oz) is on. Thus, there are 18 FIXME changes here
that should be added as follow-on patches with regression tests.
This patch is NFC-intended: it just replaces existing direct accesses of the attributes
by the equivalent wrapper call.
Differential Revision: http://reviews.llvm.org/D11734
llvm-svn: 243994
In the commentary for D11660, I wasn't sure if it was alright to create new
integer machine instructions without also creating the implicit EFLAGS operand.
From what I can see, the implicit operand is always created by the MachineInstrBuilder
based on the instruction type, so we don't have to do that explicitly. However, in
reviewing the debug output, I noticed that the operand was not marked as 'dead'.
The machine combiner should do that to preserve future optimization opportunities
that may be checking for that dead EFLAGS operand themselves.
Differential Revision: http://reviews.llvm.org/D11696
llvm-svn: 243990
Add i16, i32, i64 imul machine instructions to the list of reassociation
candidates.
A new bit of logic is needed to handle integer instructions: they have an
implicit EFLAGS operand, so we have to make sure it's dead in order to do
any reassociation with integer ops.
Differential Revision: http://reviews.llvm.org/D11660
llvm-svn: 243756
This is a follow-up to the FIXME that was added with D7474 ( http://reviews.llvm.org/rL229531 ).
I thought this load folding bug had been made hard-to-hit, but it turns out to be very easy
when targeting 32-bit x86 and causes a miscompile/crash in Wine:
https://bugs.winehq.org/show_bug.cgi?id=38826https://llvm.org/bugs/show_bug.cgi?id=22371#c25
The quick fix is to simply remove the scalar FP logical instructions from the load folding table
in X86InstrInfo, but that causes us to miss load folds that should be possible when lowering fabs,
fneg, fcopysign. So the majority of this patch is altering those lowerings to use *vector* FP
logical instructions (because that's all x86 gives us anyway). That lets us do the load folding
legally.
Differential Revision: http://reviews.llvm.org/D11477
llvm-svn: 243361
Adds pushes to the folding tables.
This also required a fix to the TD definition, since the memory forms of
the push instructions did not have the right mayLoad/mayStore flags.
Differential Revision: http://reviews.llvm.org/D11340
llvm-svn: 243010
canFoldMemoryOperand is not actually used anywhere in the codebase - all existing users instead call foldMemoryOperand directly when they wish to fold and can correctly deduce what they need from the return value.
This patch removes the canFoldMemoryOperand base function and the target implementations; only x86 had a real (bit-rotted) implementation, although AMDGPU had a preparatory stub that had never needed to be completed.
Differential Revision: http://reviews.llvm.org/D11331
llvm-svn: 242638
MOVSDto64rr and MOV64toSDrr are defined to convert between FR64 (%xmm)
<-> GR64 registers, not VR64 (%mm) <-> GR64. This is wrong.
I found this by inspection and could not find a suitable testcase for it
since (1) we don't handle MMX bitcasts in Peephole optimizer as to
generate COPYs that (2) could be expanded back to the appropriate x86
instruction in ExpandPostRA.
Switch to use the appropriate instructions: MMX_MOVD64from64rr and
MMX_MOVD64to64rr here.
llvm-svn: 242191
Extend the reassociation optimization of http://reviews.llvm.org/rL240361 (D10460)
to SSE scalar FP SP adds in addition to AVX scalar FP SP adds.
With the 'switch' in place, we can trivially add other opcodes and test cases in
future patches.
Differential Revision: http://reviews.llvm.org/D10975
llvm-svn: 241515
Currently ( D10321, http://reviews.llvm.org/rL239486 ), we can use the machine combiner pass
to reassociate the following sequence to reduce the critical path:
A = ? op ?
B = A op X
C = B op Y
-->
A = ? op ?
B = X op Y
C = A op B
'op' is currently limited to x86 AVX scalar FP adds (with fast-math on), but in theory, it could
be any associative math/logic op (see TODO in code comment).
This patch generalizes the pattern match to ignore the instruction that defines 'A'. So instead of
a sequence of 3 adds, we now only need to find 2 dependent adds and decide if it's worth
reassociating them.
This generalization has a compile-time cost because we can now match more instruction sequences
and we rely more heavily on the machine combiner to discard sequences where reassociation doesn't
improve the critical path.
For example, in the new test case:
A = M div N
B = A add X
C = B add Y
We'll match 2 reassociation patterns, but this transform doesn't reduce the critical path:
A = M div N
B = A add Y
C = B add X
We need the combiner to reject that pattern but select this:
A = M div N
B = X add Y
C = B add A
Differential Revision: http://reviews.llvm.org/D10460
llvm-svn: 240361
The _Int instructions are special, in that they operate on the full
VR128 instead of FR32. The load folding then looks at MOVSS, at the
user, and bails out when it sees a size mismatch.
What we really know is that the rm_Int instructions don't load the
higher lanes, so folding is fine.
This happens for the straightforward intrinsic code, e.g.:
_mm_add_ss(a, _mm_load_ss(p));
Fixes PR23349.
Differential Revision: http://reviews.llvm.org/D10554
llvm-svn: 240326
The patch is generated using this command:
tools/clang/tools/extra/clang-tidy/tool/run-clang-tidy.py -fix \
-checks=-*,llvm-namespace-comment -header-filter='llvm/.*|clang/.*' \
llvm/lib/
Thanks to Eugene Kosov for the original patch!
llvm-svn: 240137
Summary:
NFC: no one uses AnalyzeBranchPredicate yet.
Add TargetInstrInfo::AnalyzeBranchPredicate and implement for x86. A
later change adding support for page-fault based implicit null checks
depends on this.
Reviewers: reames, ab, atrick
Reviewed By: atrick
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D10200
llvm-svn: 239742
Summary:
TargetInstrInfo::getLdStBaseRegImmOfs to
TargetInstrInfo::getMemOpBaseRegImmOfs and implement for x86. The
implementation only handles a few easy cases now and will be made more
sophisticated in the future.
This is NFCI: the only user of `getLdStBaseRegImmOfs` (now
`getmemOpBaseRegImmOfs`) is `LoadClusterMotion` and `LoadClusterMotion`
is disabled for x86.
Reviewers: reames, ab, MatzeB, atrick
Reviewed By: MatzeB, atrick
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D10199
llvm-svn: 239741
This will use Itinieraries if available, but will also work if just a
MCSchedModel is available.
Differential Revision: http://reviews.llvm.org/D10428
llvm-svn: 239658
This is a reimplementation of D9780 at the machine instruction level rather than the DAG.
Use the MachineCombiner pass to reassociate scalar single-precision AVX additions (just a
starting point; see the TODO comments) to increase ILP when it's safe to do so.
The code is closely based on the existing MachineCombiner optimization that is implemented
for AArch64.
This patch should not cause the kind of spilling tragedy that led to the reversion of r236031.
Differential Revision: http://reviews.llvm.org/D10321
llvm-svn: 239486
Summary:
This was a longstanding FIXME and is a necessary precursor to cases
where foldOperandImpl may have to create more than one instruction
(e.g. to constrain a register class). This is the split out NFC changes from
D6262.
Reviewers: pete, ributzka, uweigand, mcrosier
Reviewed By: mcrosier
Subscribers: mcrosier, ted, llvm-commits
Differential Revision: http://reviews.llvm.org/D10174
llvm-svn: 239336
Implemented DAG lowering for all these forms.
Added tests for DAG lowering and encoding.
Differential Revision: http://reviews.llvm.org/D10310
llvm-svn: 239300
Finish the job that was abandoned in D6958 following the refactoring in
http://reviews.llvm.org/rL230221:
1. Uncomment the intrinsic def for the AVX r_Int instruction.
2. Add missing r_Int entries to the load folding tables; there are already
tests that check these in "test/Codegen/X86/fold-load-unops.ll", so I
haven't added any more in this patch.
3. Add patterns to solve PR21507 ( https://llvm.org/bugs/show_bug.cgi?id=21507 ).
So instead of this:
movaps %xmm0, %xmm1
rcpss %xmm1, %xmm1
movss %xmm1, %xmm0
We should now get:
rcpss %xmm0, %xmm0
And instead of this:
vsqrtss %xmm0, %xmm0, %xmm1
vblendps $1, %xmm1, %xmm0, %xmm0 ## xmm0 = xmm1[0],xmm0[1,2,3]
We should now get:
vsqrtss %xmm0, %xmm0, %xmm0
Differential Revision: http://reviews.llvm.org/D9504
llvm-svn: 236740
We don't need codegen-only intrinsic instructions for the vector forms of these instructions.
This makes the reciprocal estimate instruction lowering identical to how we handle normal
square roots: (V)SQRTPS / (V)SQRTPD.
No existing regression tests fail with this patch.
Differential Revision: http://reviews.llvm.org/D9301
llvm-svn: 236013
This is a 1-line patch (with a TODO for AVX because that will affect
even more regression tests) that lets us substitute the appropriate
64-bit store for the float/double/int domains.
It's not clear to me exactly what the difference is between the 0xD6 (MOVPQI2QImr) and
0x7E (MOVSDto64mr) opcodes, but this is apparently the right choice.
Differential Revision: http://reviews.llvm.org/D8691
llvm-svn: 235014
All of the cases were just appending from random access iterators to a
vector. Using insert/append can grow the vector to the perfect size
directly and moves the growing out of the loop. No intended functionalty
change.
llvm-svn: 230845
Reapply r230248.
Teach the peephole optimizer to work with MMX instructions by adding
entries into the foldable tables. This covers folding opportunities not
handled during isel.
llvm-svn: 230499
Teach the peephole optimizer to work with MMX instructions by adding
entries into the foldable tables. This covers folding opportunities not
handled during isel.
llvm-svn: 230226
Change the memory operands in sse12_fp_packed_scalar_logical_alias from scalars to vectors.
That's what the hardware packed logical FP instructions define: 128-bit memory operands.
There are no scalar versions of these instructions...because this is x86.
Generating the wrong code (folding a scalar load into a 128-bit load) is still possible
using the peephole optimization pass and the load folding tables. We won't completely
solve this bug until we either fix the lowering in fabs/fneg/fcopysign and any other
places where scalar FP logic is created or fix the load folding in foldMemoryOperandImpl()
to make sure it isn't changing the size of the load.
Differential Revision: http://reviews.llvm.org/D7474
llvm-svn: 229531
Patch to allow XOP instructions (integer comparison and integer multiply-add) to be commuted. The comparison instructions sometimes require the compare mode to be flipped but the remaining instructions can use default commutation modes.
This patch also sets the SSE domains of all the XOP instructions.
Differential Revision: http://reviews.llvm.org/D7646
llvm-svn: 229267
Canonicalize access to function attributes to use the simpler API.
getAttributes().getAttribute(AttributeSet::FunctionIndex, Kind)
=> getFnAttribute(Kind)
getAttributes().hasAttribute(AttributeSet::FunctionIndex, Kind)
=> hasFnAttribute(Kind)
llvm-svn: 229214
Added most of the missing vector folding patterns for AVX2 (as well as fixing the vpermpd and verpmq patterns)
Differential Revision: http://reviews.llvm.org/D7492
llvm-svn: 228688
This patch adds the complete AMD Bulldozer XOP instruction set to the memory folding pattern tables for stack folding, etc.
Note: Many of the XOP instructions have multiple table entries as it can fold loads from different sources.
Differential Revision: http://reviews.llvm.org/D7484
llvm-svn: 228685
This moves the transformation introduced in r223757 into a separate MI pass.
This allows it to cover many more cases (not only cases where there must be a
reserved call frame), and perform rudimentary call folding. It still doesn't
have a heuristic, so it is enabled only for optsize/minsize, with stack
alignment <= 8, where it ought to be a fairly clear win.
(Re-commit of r227728)
Differential Revision: http://reviews.llvm.org/D6789
llvm-svn: 227752
This moves the transformation introduced in r223757 into a separate MI pass.
This allows it to cover many more cases (not only cases where there must be a
reserved call frame), and perform rudimentary call folding. It still doesn't
have a heuristic, so it is enabled only for optsize/minsize, with stack
alignment <= 8, where it ought to be a fairly clear win.
Differential Revision: http://reviews.llvm.org/D6789
llvm-svn: 227728
MSDN's x64 software conventions page says that this is one of the fixed
list of legal epilogues:
https://msdn.microsoft.com/en-us/library/tawsa7cb.aspx
Presumably this is how the unwinder distinguishes epilogue jumps from
in-function control flow.
Also normalize the way we place "## TAILCALL" comments on such jumps.
llvm-svn: 227611
For ordered, unordered, equal and not-equal tests, packed float and double comparison instructions can be safely commuted without affecting the results. This patch checks the comparison mode of the (v)cmpps + (v)cmppd instructions and commutes the result if it can.
Differential Revision: http://reviews.llvm.org/D7178
llvm-svn: 227145
Patch to allow (v)pclmulqdq to be commuted - swaps the src registers and inverts the immediate (low/high) src mask.
Differential Revision: http://reviews.llvm.org/D7180
llvm-svn: 227141
Minor tweak now that D7042 is complete, we can enable stack folding for (V)MOVDDUP and do proper testing.
Added missing AVX ymm folding patterns and fixed alignment for AVX VMOVSLDUP / VMOVSHDUP.
llvm-svn: 226873
Added most of the missing integer vector folding patterns for SSE (to SSE42) and AVX1.
The most useful of these are probably the i32/i64 extraction, i8/i16/i32/i64 insertions, zero/sign extension, unsigned saturation subtractions, i64 subtractions and the variable mask blends (pblendvb) - others include CLMUL, SSE42 string comparisons and bit tests.
Differential Revision: http://reviews.llvm.org/D7094
llvm-svn: 226745
Now that we can create much more exhaustive X86 memory folding tests, this patch adds the missing AVX1/F16C floating point instruction stack foldings we can easily test for including the scalar intrinsics (add, div, max, min, mul, sub), conversions float/int to double, half precision conversions, rounding, dot product and bit test. The patch also adds a couple of obviously missing SSE instructions (more to follow once we have full SSE testing).
Now that scalar folding is working it broke a very old test (2006-10-07-ScalarSSEMiscompile.ll) - this test appears to make no sense as its trying to ensure that a scalar subtraction isn't folded as it 'would zero the top elts of the loaded vector' - this test just appears to be wrong to me.
Differential Revision: http://reviews.llvm.org/D7055
llvm-svn: 226513
A pass that adds random noops to X86 binaries to introduce diversity with the goal of increasing security against most return-oriented programming attacks.
Command line options:
-noop-insertion // Enable noop insertion.
-noop-insertion-percentage=X // X% of assembly instructions will have a noop prepended (default: 50%, requires -noop-insertion)
-max-noops-per-instruction=X // Randomly generate X noops per instruction. ie. roll the dice X times with probability set above (default: 1). This doesn't guarantee X noop instructions.
In addition, the following 'quick switch' in clang enables basic diversity using default settings (currently: noop insertion and schedule randomization; it is intended to be extended in the future).
-fdiversify
This is the llvm part of the patch.
clang part: D3393
http://reviews.llvm.org/D3392
Patch by Stephen Crane (@rinon)
llvm-svn: 225908
Overall this seems simpler. It reduces duplication of patterns between both modes and it simplifies the memory folding/unfolding tables as they don't need to create fake instructions just to keep track of 64-bitness.
llvm-svn: 225252
The assembler backend will relax to the long form if necessary. This removes a swap from long form to short form in the MCInstLowering code. Selecting the long form used to be required by the old JIT.
llvm-svn: 225242
Added RegOp2MemOpTable4 to transform 4th operand from register to memory in merge-masked versions of instructions.
Added lowering tests.
llvm-svn: 224516
Added a missing memory folding relationship for the (V)CVTPD2PS instruction - we can safely fold these for stack reloads.
Differential Revision: http://reviews.llvm.org/D6663
llvm-svn: 224383
Adds the various "rm" instruction variants into the list of instructions that have a partial register update. Also adds all variants of SQRTSD that were missing in the original list.
Differential Revision: http://reviews.llvm.org/D6620
llvm-svn: 224246
Lowering patterns were written through avx512_broadcast_pat multiclass as pattern generates VBROADCAST and COPY_TO_REGCLASS nodes.
Added lowering tests.
llvm-svn: 223804
Under many circumstances the stack is not 32-byte aligned, resulting in the use of the vmovups/vmovupd/vmovdqu instructions when inserting ymm reloads/spills.
This minor patch adds these instructions to the isFrameLoadOpcode/isFrameStoreOpcode helpers so that they can be correctly identified and not be treated as folded reloads/spills.
This has also been noticed by http://llvm.org/bugs/show_bug.cgi?id=18846 where it was causing redundant spills - I've added a reduced test case at test/CodeGen/X86/pr18846.ll
Differential Revision: http://reviews.llvm.org/D6252
llvm-svn: 222281
This commit adds a new pass that can inject checks before indirect calls to
make sure that these calls target known locations. It supports three types of
checks and, at compile time, it can take the name of a custom function to call
when an indirect call check fails. The default failure function ignores the
error and continues.
This pass incidentally moves the function JumpInstrTables::transformType from
private to public and makes it static (with a new argument that specifies the
table type to use); this is so that the CFI code can transform function types
at call sites to determine which jump-instruction table to use for the check at
that site.
Also, this removes support for jumptables in ARM, pending further performance
analysis and discussion.
Review: http://reviews.llvm.org/D4167
llvm-svn: 221708
Fixed an issue with the (v)cvttps2dq and (v)cvttpd2dq instructions being incorrectly put in the 2 source operand folding tables instead of the 1 source operand and added the missing SSE/AVX versions.
Also added missing (v)cvtps2dq and (v)cvtpd2dq instructions to the folding tables.
Differential Revision: http://reviews.llvm.org/D6001
llvm-svn: 221489
Example:
define <4 x i32> @test(<4 x i32> %a, <4 x i32> %b) {
%shuffle = shufflevector <4 x i32> %a, <4 x i32> %b, <4 x i32> <i32 4, i32 5, i32 6, i32 3>
ret <4 x i32> %shuffle
}
Before llc (-mattr=+sse4.1), produced the following assembly instruction:
pblendw $4294967103, %xmm1, %xmm0
After
pblendw $63, %xmm1, %xmm0
llvm-svn: 221455
Added missing memory folding for the (V)CVTDQ2PS instructions - we can safely fold these (but not the (V)CVTDQ2PD versions which have a register/memory size discrepancy in the source operand). I've added a test case demonstrating that stack folding now works.
Differential Revision: http://reviews.llvm.org/D5981
llvm-svn: 221407
Patch to allow (v)blendps, (v)blendpd, (v)pblendw and vpblendd instructions to be commuted - swaps the src registers and inverts the blend mask.
This is primarily to improve memory folding (see new tests), but it also improves the quality of shuffles (see modified tests).
Differential Revision: http://reviews.llvm.org/D6015
llvm-svn: 221313
It appears to ignore or find ambiguous MachineInstrBuilder's conversion
operators that allow conversion to MachineInstr* and
MachineBasicBlock::bundle_iterator.
As a workaround, add an explicit way to get the MachineInstr.
llvm-svn: 221017
Tidied up some entries in the folding tables so that they are under the correct comment section (they were categorised as AVX2 instructions when they're AVX1).
Minor patch agreed with qcolombet.
llvm-svn: 220613
This patch improves support for commutative instructions in the x86 memory folding implementation by attempting to fold a commuted version of the instruction if the original folding fails - if that folding fails as well the instruction is 're-commuted' back to its original order before returning.
Updated version of r219584 (reverted in r219595) - the commutation attempt now explicitly ensures that neither of the commuted source operands are tied to the destination operand / register, which was the source of all the regressions that occurred with the original patch attempt.
Added additional regression test case provided by Joerg Sonnenberger.
Differential Revision: http://reviews.llvm.org/D5818
llvm-svn: 220239
This patch improves support for commutative instructions in the x86 memory folding implementation by attempting to fold a commuted version of the instruction if the original folding fails - if that folding fails as well the instruction is 're-commuted' back to its original order before returning.
This mainly helps the stack inliner better fold reloads of 3 (or more) operand instructions (VEX encoded SSE etc.) but by performing this in the lowest foldMemoryOperandImpl implementation it also replaces the X86InstrInfo::optimizeLoadInstr version and is now used by FastISel too.
Differential Revision: http://reviews.llvm.org/D5701
llvm-svn: 219584
This trades a (register-renamer-friendly) movaps for a floating point
/ integer domain cross. That is a very bad trade, even on architectures
where domain crossing is relatively fast. On any chip where there is
even a cycle stall, this is a Very Bad Idea. It doesn't even seem likely
to cause a spill to be introduced because the reason for the copy is to
destructively shuffle in place.
Thanks to Ben Kramer for fixing a bug in this code that my new shuffle
lowering exposed and highlighting that perhaps it should just go away.
=]
llvm-svn: 219090
Summary:
Update segmented-stacks*.ll tests with x32 target case and make
corresponding changes to make them pass.
Test Plan: tests updated with x32 target
Reviewers: nadav, rafael, dschuff
Subscribers: llvm-commits, zinovy.nis
Differential Revision: http://reviews.llvm.org/D5245
llvm-svn: 218247
Peephole optimization was folding MOVSDrm, which is a zero-extending double
precision floating point load, into ADDPDrr, which is a SIMD add of two packed
double precision floating point values.
(before)
%vreg21<def> = MOVSDrm <fi#0>, 1, %noreg, 0, %noreg; mem:LD8[%7](align=16)(tbaa=<badref>) VR128:%vreg21
%vreg23<def,tied1> = ADDPDrr %vreg20<tied0>, %vreg21; VR128:%vreg23,%vreg20,%vreg21
(after)
%vreg23<def,tied1> = ADDPDrm %vreg20<tied0>, <fi#0>, 1, %noreg, 0, %noreg; mem:LD8[%7](align=16)(tbaa=<badref>) VR128:%vreg23,%vreg20
X86InstrInfo::foldMemoryOperandImpl already had the logic that prevented this
from happening. However the check wasn't being conducted for loads from stack
objects. This commit factors out the logic into a new function and uses it for
checking loads from stack slots are not zero-extending loads.
rdar://problem/18236850
llvm-svn: 217799
be deleted. This will be reapplied as soon as possible and before
the 3.6 branch date at any rate.
Approved by Jim Grosbach, Lang Hames, Rafael Espindola.
This reverts commits r215111, 215115, 215116, 215117, 215136.
llvm-svn: 215154
I am sure we will be finding bits and pieces of dead code for years to
come, but this is a good start.
Thanks to Lang Hames for making MCJIT a good replacement!
llvm-svn: 215111
address of the stack guard was being spilled to the stack.
Previously the address of the stack guard would get spilled to the stack if it
was impossible to keep it in a register. This patch introduces a new target
independent node and pseudo instruction which gets expanded post-RA to a
sequence of instructions that load the stack guard value. Register allocator
can now just remat the value when it can't keep it in a register.
<rdar://problem/12475629>
llvm-svn: 213967
Make use of helper functions to simplify the branch and compare instruction
selection in FastISel. Also add test cases for compare and conditonal branch.
llvm-svn: 211077
It includes a pass that rewrites all indirect calls to jumptable functions to pass through these tables.
This also adds backend support for generating the jump-instruction tables on ARM and X86.
Note that since the jumptable attribute creates a second function pointer for a
function, any function marked with jumptable must also be marked with unnamed_addr.
llvm-svn: 210280
According to Intel Software Optimization Manual on Silvermont in some cases LEA
is better to be replaced with ADD instructions:
"The rule of thumb for ADDs and LEAs is that it is justified to use LEA
with a valid index and/or displacement for non-destructive destination purposes
(especially useful for stack offset cases), or to use a SCALE.
Otherwise, ADD(s) are preferable."
Differential Revision: http://reviews.llvm.org/D3826
llvm-svn: 209198
For example
tzcntl %edi, %ebx
testl %edi, %edi
je .label
can be rewritten into
tzcntl %edi, %ebx
jb .label
A minor complication is that tzcnt sets CF instead of ZF when the input
is zero, we have to rewrite users of the flags from ZF to CF. Currently
we recognize patterns using lzcnt, tzcnt and popcnt.
Differential Revision: http://reviews.llvm.org/D3454
llvm-svn: 208788
system headers above the includes of generated '.inc' files that
actually contain code. In a few targets this was already done pretty
consistently, but it wasn't done *really* consistently anywhere. It is
strictly cleaner IMO and necessary in a bunch of places where the
DEBUG_TYPE is referenced from the generated code. Consistency with the
necessary places trumps. Hopefully the build bots are OK with the
movement of intrin.h...
llvm-svn: 206838
behavior based on other files defining DEBUG_TYPE, which means it cannot
define DEBUG_TYPE at all. This is actually better IMO as it forces folks
to define relevant DEBUG_TYPEs for their files. However, it requires all
files that currently use DEBUG(...) to define a DEBUG_TYPE if they don't
already. I've updated all such files in LLVM and will do the same for
other upstream projects.
This still leaves one important change in how LLVM uses the DEBUG_TYPE
macro going forward: we need to only define the macro *after* header
files have been #include-ed. Previously, this wasn't possible because
Debug.h required the macro to be pre-defined. This commit removes that.
By defining DEBUG_TYPE after the includes two things are fixed:
- Header files that need to provide a DEBUG_TYPE for some inline code
can do so by defining the macro before their inline code and undef-ing
it afterward so the macro does not escape.
- We no longer have rampant ODR violations due to including headers with
different DEBUG_TYPE definitions. This may be mostly an academic
violation today, but with modules these types of violations are easy
to check for and potentially very relevant.
Where necessary to suppor headers with DEBUG_TYPE, I have moved the
definitions below the includes in this commit. I plan to move the rest
of the DEBUG_TYPE macros in LLVM in subsequent commits; this one is big
enough.
The comments in Debug.h, which were hilariously out of date already,
have been updated to reflect the recommended practice going forward.
llvm-svn: 206822
TargetInstrInfo::findCommutedOpIndices to enable VFMA*231 commutation, rather
than abusing commuteInstruction.
Thanks very much for the suggestion guys!
llvm-svn: 205489
on FMA3 memory operands. FMA3 instructions are VEX encoded, so they can load
from unaligned memory.
Testcase to follow, along with related patch.
<rdar://problem/16478629>
llvm-svn: 205472
Adds the different broadcast instructions to the ReplaceableInstrsAVX2 table.
That way the ExeDepsFix pass can take better decisions when AVX2 broadcasts are
across domain (int <-> float).
In particular, prior to this patch we were generating:
vpbroadcastd LCPI1_0(%rip), %ymm2
vpand %ymm2, %ymm0, %ymm0
vmaxps %ymm1, %ymm0, %ymm0 ## <- domain change penalty
Now, we generate the following nice sequence where everything is in the float
domain:
vbroadcastss LCPI1_0(%rip), %ymm2
vandps %ymm2, %ymm0, %ymm0
vmaxps %ymm1, %ymm0, %ymm0
<rdar://problem/16354675>
llvm-svn: 204770
operator* on the by-operand iterators to return a MachineOperand& rather than
a MachineInstr&. At this point they almost behave like normal iterators!
Again, this requires making some existing loops more verbose, but should pave
the way for the big range-based for-loop cleanups in the future.
llvm-svn: 203865
It looks like these pseudos were only used for pattern matching. Def pats are
the appropriate way to do that. As a bonus, these intrinsics will now have
memory operands folded properly, and better FMA3 variants selected where
appropriate (see r199933).
<rdar://problem/15611947>
llvm-svn: 200577
Added scalar compare VCMPSS, VCMPSD.
Implemented LowerSELECT for scalar FP operations.
I replaced FSETCCss, FSETCCsd with one node type FSETCCs.
Node extract_vector_elt(v16i1/v8i1, idx) returns an element of type i1.
llvm-svn: 197384
target independent.
Most of the x86 specific stackmap/patchpoint handling was necessitated by the
use of the native address-mode format for frame index operands. PEI has now
been modified to treat stackmap/patchpoint similarly to DEBUG_INFO, allowing
us to use a simple, platform independent register/offset pair for frame
indexes on stackmap/patchpoints.
Notes:
- Folding is now platform independent and automatically supported.
- Emiting patchpoints with direct memory references now just involves calling
the TargetLoweringBase::emitPatchPoint utility method from the target's
XXXTargetLowering::EmitInstrWithCustomInserter method. (See
X86TargetLowering for an example).
- No more ugly platform-specific operand parsers.
This patch shouldn't change the generated output for X86.
llvm-svn: 195944
A Direct stack map location records the address of frame index. This
address is itself the value that the runtime requested. This differs
from IndirectMemRefOp locations, which refer to a stack locations from
which the requested values must be loaded. Direct locations can
directly communicate the address if an alloca, while IndirectMemRefOp
handle register spills.
For example:
entry:
%a = alloca i64...
llvm.experimental.stackmap(i32 <ID>, i32 <shadowBytes>, i64* %a)
Since both the alloca and stackmap intrinsic are in the entry block,
and the intrinsic takes the address of the alloca, the runtime can
assume that LLVM will not substitute alloca with any intervening
value. This must be verified by the runtime by checking that the stack
map's location is a Direct location type. The runtime can then
determine the alloca's relative location on the stack immediately after
compilation, or at any time thereafter. This differs from Register and
Indirect locations, because the runtime can only read the values in
those locations when execution reaches the instruction address of the
stack map.
llvm-svn: 195712
This patch removes most of the trivial cases of weak vtables by pinning them to
a single object file. The memory leaks in this version have been fixed. Thanks
Alexey for pointing them out.
Differential Revision: http://llvm-reviews.chandlerc.com/D2068
Reviewed by Andy
llvm-svn: 195064
This change is incorrect. If you delete virtual destructor of both a base class
and a subclass, then the following code:
Base *foo = new Child();
delete foo;
will not cause the destructor for members of Child class. As a result, I observe
plently of memory leaks. Notable examples I investigated are:
ObjectBuffer and ObjectBufferStream, AttributeImpl and StringSAttributeImpl.
llvm-svn: 194997
Implementing this on bigendian platforms could get strange. I added a
target hook, getStackSlotRange, per Jakob's recommendation to make
this as explicit as possible.
llvm-svn: 194942
This patch removes most of the trivial cases of weak vtables by pinning them to
a single object file.
Differential Revision: http://llvm-reviews.chandlerc.com/D2068
Reviewed by Andy
llvm-svn: 194865
We already know how to fold a reload from a frameindex without
analyzing the load instruction. Generalize this to handle any
frameindex load. This streamlines the logic for rematerializing loads
from stack arguments. As a side effect, it allows stackmaps to record
a stack argument location without spilling it.
Verified no effect on codegen for llvm test-suite.
llvm-svn: 194497
Fixes <rdar://15432754> [JS] Assertion: "Folded a def to a non-store!"
The primary purpose of anyregcc is to prevent a patchpoint's call
arguments and return value from being spilled. They must be available
in a register, although the calling convention does not pin the
register. It's up to the front end to avoid using this convention for
calls with more arguments than allocatable registers.
llvm-svn: 194428
The idea of the AnyReg Calling Convention is to provide the call arguments in
registers, but not to force them to be placed in a paticular order into a
specified set of registers. Instead it is up tp the register allocator to assign
any register as it sees fit. The same applies to the return value (if
applicable).
Differential Revision: http://llvm-reviews.chandlerc.com/D2009
Reviewed by Andy
llvm-svn: 194293
This pass is needed to break false dependencies. Without it, unlucky
register assignment can result in wild (5x) swings in
performance. This pass was trying to handle AVX but not getting it
right. AVX doesn't have partial register defs, it has unused register
reads in which the high bits of a source operand are copied into the
unused bits of the dest.
Fixing this requires conservative liveness analysis. This is awkard
because the pass already has its own pseudo-liveness. However, proper
liveness is expensive, and we would like to use a generic utility to
compute it. The fix only invokes liveness on-demand. It is rare to
detect a case that needs undef-read dependence breaking, but when it
happens, it can be needed many times within a very large block.
I think the existing heuristic which uses a register window of 16 is
too conservative for loop-carried false dependencies. If the loop is a
reduction. The out-of-order engine may be able to execute several loop
iterations in parallel. However, I'll leave this tuning exercise for
next time.
llvm-svn: 192635
This is an awful implementation of the target hook. But we don't have
abstractions yet for common machine ops, and I don't see any quick way
to make it table-driven.
llvm-svn: 184664
Frame index handling is now target-agnostic, so delete the target hooks
for creation & asm printing of target-specific addressing in DBG_VALUEs
and any related functions.
llvm-svn: 184067
Previously LEA64_32r went through virtually the entire backend thinking it was
using 32-bit registers until its blissful illusions were cruelly snatched away
by MCInstLower and 64-bit equivalents were substituted at the last minute.
This patch makes it behave normally, and take 64-bit registers as sources all
the way through. Previous uses (for 32-bit arithmetic) are accommodated via
SUBREG_TO_REG instructions which make the types and classes agree properly.
llvm-svn: 183693
Instead of having a bunch of separate MOV8r0, MOV16r0, ... pseudo-instructions,
it's better to use a single MOV32r0 (which will expand to "xorl %reg, %reg")
and obtain other sizes with EXTRACT_SUBREG and SUBREG_TO_REG. The encoding is
smaller and partial register updates can sometimes be avoided.
Until recently, this sequence was a barrier to rematerialization though. That
should now be fixed so it's an appropriate time to make the change.
llvm-svn: 182928
32-bit writes on amd64 zero out the high bits of the corresponding 64-bit
register. LLVM makes use of this for zero-extension, but until now relied on
custom MCLowering and other code to fixup instructions. Now we have proper
handling of sub-registers, this can be done by creating SUBREG_TO_REG
instructions at selection-time.
Should be no change in functionality.
llvm-svn: 182921
The peephole tries to reorder MOV32r0 instructions such that they are
before the instruction that modifies EFLAGS.
The problem is that the peephole does not consider the case where the
instruction that modifies EFLAGS also depends on the previous state of
EFLAGS.
Instead, walk backwards until we find an instruction that has a def for
EFLAGS but does not have a use.
If we find such an instruction, insert the MOV32r0 before it.
If it cannot find such an instruction, skip the optimization.
llvm-svn: 182184
Increase the number of instructions LLVM recognizes as setting the ZF
flag. This allows us to remove test instructions that redundantly
recalculate the flag.
llvm-svn: 181937
form of call in preference to memory indirect on Atom.
In this case, the patch applies the optimization to the code for reloading
spilled registers.
The patch also includes changes to sibcall.ll and movgs.ll, which were
failing on the Atom buildbot after the first patch was applied.
This patch by Sriram Murali.
llvm-svn: 178193
into their new header subdirectory: include/llvm/IR. This matches the
directory structure of lib, and begins to correct a long standing point
of file layout clutter in LLVM.
There are still more header files to move here, but I wanted to handle
them in separate commits to make tracking what files make sense at each
layer easier.
The only really questionable files here are the target intrinsic
tablegen files. But that's a battle I'd rather not fight today.
I've updated both CMake and Makefile build systems (I think, and my
tests think, but I may have missed something).
I've also re-sorted the includes throughout the project. I'll be
committing updates to Clang, DragonEgg, and Polly momentarily.
llvm-svn: 171366
directly.
This is in preparation for removing the use of the 'Attribute' class as a
collection of attributes. That will shift to the AttributeSet class instead.
llvm-svn: 171253
When these instructions are encoded in VEX (on AVX) there is no such requirement. This changes the folding
tables and removes the alignment restrictions from VEX-encoded instructions.
llvm-svn: 171024
The only way to read the eflags is using push and pop. If we don't
adjust the stack then we run over the first frame index. This is
not something that we want to do, so we have to make sure that
our machine function does not copy the flags. If it does then
we have to emit the prolog that adjusts the stack.
rdar://12896831
llvm-svn: 170961
Use the version that also takes an MF reference instead.
It would technically be possible to extract an MF reference from the MI
as MI->getParent()->getParent(), but that would not work for MIs that
are not inserted into any basic block.
Given the reasonably small number of places this constructor was used at
all, I preferred the compile time check to a run time assertion.
llvm-svn: 170588
Sooooo many of these had incorrect or strange main module includes.
I have manually inspected all of these, and fixed the main module
include to be the nearest plausible thing I could find. If you own or
care about any of these source files, I encourage you to take some time
and check that these edits were sensible. I can't have broken anything
(I strictly added headers, and reordered them, never removed), but they
may not be the headers you'd really like to identify as containing the
API being implemented.
Many forward declarations and missing includes were added to a header
files to allow them to parse cleanly when included first. The main
module rule does in fact have its merits. =]
llvm-svn: 169131
when the destination register is wider than the memory load.
These load instructions load from m32 or m64 and set the upper bits to zero,
while the folded instructions may accept m128.
rdar://12721174
llvm-svn: 168710
We use the enums to query whether an Attributes object has that attribute. The
opaque layer is responsible for knowing where that specific attribute is stored.
llvm-svn: 165488
- Rewrite/merge pseudo-atomic instruction emitters to address the
following issue:
* Reduce one unnecessary load in spin-loop
previously the spin-loop looks like
thisMBB:
newMBB:
ld t1 = [bitinstr.addr]
op t2 = t1, [bitinstr.val]
not t3 = t2 (if Invert)
mov EAX = t1
lcs dest = [bitinstr.addr], t3 [EAX is implicit]
bz newMBB
fallthrough -->nextMBB
the 'ld' at the beginning of newMBB should be lift out of the loop
as lcs (or CMPXCHG on x86) will load the current memory value into
EAX. This loop is refined as:
thisMBB:
EAX = LOAD [MI.addr]
mainMBB:
t1 = OP [MI.val], EAX
LCMPXCHG [MI.addr], t1, [EAX is implicitly used & defined]
JNE mainMBB
sinkMBB:
* Remove immopc as, so far, all pseudo-atomic instructions has
all-register form only, there is no immedidate operand.
* Remove unnecessary attributes/modifiers in pseudo-atomic instruction
td
* Fix issues in PR13458
- Add comprehensive tests on atomic ops on various data types.
NOTE: Some of them are turned off due to missing functionality.
- Revise tests due to the new spin-loop generated.
llvm-svn: 164281
We perform the following:
1> Use SUB instead of CMP for i8,i16,i32 and i64 in ISel lowering.
2> Modify MachineCSE to correctly handle implicit defs.
3> Convert SUB back to CMP if possible at peephole.
Removed pattern matching of (a>b) ? (a-b):0 and like, since they are handled
by peephole now.
rdar://11873276
llvm-svn: 161462
We can't rematerialize a PIC base after register allocation anyway, and
scanning physreg use-def chains is very expensive in a function with
many calls.
<rdar://problem/12047515>
llvm-svn: 161461
Machine CSE and other optimizations can remove instructions so folding
is possible at peephole while not possible at ISel.
This patch is a rework of r160919 and was tested on clang self-host on my local
machine.
rdar://10554090 and rdar://11873276
llvm-svn: 161152
Machine CSE and other optimizations can remove instructions so folding
is possible at peephole while not possible at ISel.
rdar://10554090 and rdar://11873276
llvm-svn: 160919
It is possible that an instruction can use and update EFLAGS.
When checking the safety, we should check the usage of EFLAGS first before
declaring it is safe to optimize due to the update.
llvm-svn: 160912
Updated OptimizeCompare in peephole to remove redundant cmp against zero.
We only remove Compare if CF and OF are not used.
rdar://11855129
llvm-svn: 160454
undef virtual register. The problem is that ProcessImplicitDefs removes the
definition of the register and marks all uses as undef. If we lose the undef
marker then we get a register which has no def, is not marked as undef. The
live interval analysis does not collect information for these virtual
registers and we crash in later passes.
Together with Michael Kuperstein <michael.m.kuperstein@intel.com>
llvm-svn: 160260
Allow the folding of vbroadcastRR to vbroadcastRM, where the memory operand is a spill slot.
PR12782.
Together with Michael Kuperstein <michael.m.kuperstein@intel.com>
llvm-svn: 160230
getCondFromSETOpc, getCondFromCMovOpc, getSETFromCond, getCMovFromCond
No functional change intended.
If we want to update the condition code of CMOV|SET|Jcc, we first analyze the
opcode to get the condition code, then update the condition code, finally
synthesize the new opcode form the new condition code.
llvm-svn: 159955
It is safe if EFLAGS is killed or re-defined.
When we are done with the basic block, check whether EFLAGS is live-out.
Do not optimize away cmp if EFLAGS is live-out.
llvm-svn: 159888
For each Cmp, we check whether there is an earlier Sub which make Cmp
redundant. We handle the case where SUB operates on the same source operands as
Cmp, including the case where the two source operands are swapped.
llvm-svn: 159838
Implement the TII hooks needed by EarlyIfConversion to create cmov
instructions and estimate their latency.
Early if-conversion is still not enabled by default.
llvm-svn: 159695
The commit is intended to fix rdar://11540023.
It is implemented as part of peephole optimization. We can actually implement
this in the SelectionDAG lowering phase.
llvm-svn: 158122
There are some that I didn't remove this round because they looked like
obvious stubs. There are dead variables in gtest too, they should be
fixed upstream.
llvm-svn: 158090
This patch will optimize the following:
sub r1, r3
cmp r3, r1 or cmp r1, r3
bge L1
TO
sub r1, r3
bge L1 or ble L1
If the branch instruction can use flag from "sub", then we can eliminate
the "cmp" instruction.
llvm-svn: 157831
This implements codegen support for accesses to thread-local variables
using the local-dynamic model, and adds a clean-up pass so that the base
address for the TLS block can be re-used between local-dynamic access on
an execution path.
llvm-svn: 157818
This patch will optimize the following
movq %rdi, %rax
subq %rsi, %rax
cmovsq %rsi, %rdi
movq %rdi, %rax
to
cmpq %rsi, %rdi
cmovsq %rsi, %rdi
movq %rdi, %rax
Perform this optimization if the actual result of SUB is not used.
rdar: 11540023
llvm-svn: 157755
I disabled FMA3 autodetection, since the result may differ from expected for some benchmarks.
I added tests for GodeGen and intrinsics.
I did not change llvm.fma.f32/64 - it may be done later.
llvm-svn: 157737
The getPointerRegClass() hook can return register classes that depend on
the calling convention of the current function (ptr_rc_tailcall).
So far, we have been able to infer the calling convention from the
subtarget alone, but as we add support for multiple calling conventions
per target, that no longer works.
Patch by Yiannis Tsiouris!
llvm-svn: 156328
to finalize MI bundles (i.e. add BUNDLE instruction and computing register def
and use lists of the BUNDLE instruction) and a pass to unpack bundles.
- Teach more of MachineBasic and MachineInstr methods to be bundle aware.
- Switch Thumb2 IT block to MI bundles and delete the hazard recognizer hack to
prevent IT blocks from being broken apart.
llvm-svn: 146542
generator to it. For non-bundle instructions, these behave exactly the same
as the MC layer API.
For properties like mayLoad / mayStore, look into the bundle and if any of the
bundled instructions has the property it would return true.
For properties like isPredicable, only return true if *all* of the bundled
instructions have the property.
For properties like canFoldAsLoad, isCompare, conservatively return false for
bundles.
llvm-svn: 146026
Like V_SET0, these instructions are expanded by ExpandPostRA to xorps /
vxorps so they can participate in execution domain swizzling.
This also makes the AVX variants redundant.
llvm-svn: 145440
This was a bug in keeping track of the available domains when merging
domain values.
The wrong domain mask caused ExecutionDepsFix to try to move VANDPSYrr
to the integer domain which is only available in AVX2.
Also add an assertion to catch future attempts at emitting AVX2
instructions.
llvm-svn: 145096
Two new TargetInstrInfo hooks lets the target tell ExecutionDepsFix
about instructions with partial register updates causing false unwanted
dependencies.
The ExecutionDepsFix pass will break the false dependencies if the
updated register was written in the previoius N instructions.
The small loop added to sse-domains.ll runs twice as fast with
dependency-breaking instructions inserted.
llvm-svn: 144602
The xorps instruction is smaller than pxor, so prefer that encoding.
The ExecutionDepsFix pass will switch the encoding to pxor and xorpd
when appropriate.
llvm-svn: 143996
In 64-bit mode, sub_8bit_hi sub-registers can only be used by NOREX
instructions. The COPY created from the EXTRACT_SUBREG DAG node cannot
target all GR8 registers, only those in GR8_NOREX.
TO enforce this, we ensure that all instructions using the
EXTRACT_SUBREG are GR8_NOREX constrained.
This fixes PR11088.
llvm-svn: 141499
This instruction is explicitly encoded without an REX prefix, so both
operands but be *_NOREX.
Also add an assertion to copyPhysReg() that fires when the MOV8rr_NOREX
constraints are not satisfied.
This fixes a miscompilation in 20040709-2 in the gcc test suite.
llvm-svn: 141410
I am going to unify the SSEDomainFix and NEONMoveFix passes into a
single target independent pass. They are essentially doing the same
thing.
llvm-svn: 140652
We already support GR64 <-> VR128 copies. All of these copies break
partial register dependencies by zeroing the high part of the target
register.
llvm-svn: 140348
alignment check for 256-bit classes more strict. There're no testcases
but we catch more folding cases for AVX while running single and multi
sources in the llvm testsuite.
Since some 128-bit AVX instructions have different number of operands
than their SSE counterparts, they are placed in different tables.
256-bit AVX instructions should also be added in the table soon. And
there a few more 128-bit versions to handled, which should come in
the following commits.
llvm-svn: 139687
single field (Flags), which is a bitwise OR of items from the TB_*
enum. This makes it easier to add new information in the future.
* Gives every static array an equivalent layout: { RegOp, MemOp, Flags }
* Adds a helper function, AddTableEntry, to avoid duplication of the
insertion code.
* Renames TB_NOT_REVERSABLE to TB_NO_REVERSE.
* Adds TB_NO_FORWARD, which is analogous to TB_NO_REVERSE, except that
it prevents addition of the Reg->Mem entry. (This is going to be used
by Native Client, in the next CL).
Patch by David Meyer
llvm-svn: 139311
sink them into MC layer.
- Added MCInstrInfo, which captures the tablegen generated static data. Chang
TargetInstrInfo so it's based off MCInstrInfo.
llvm-svn: 134021
we try to branch to them.
Before we were creating successor lists with duplicated entries. Fixing that
found a bug in isBlockOnlyReachableByFallthrough that would causes it to
return the wrong answer for
-----------
...
jne foo
jmp bar
foo:
----------
llvm-svn: 132882
Add TargetRegisterInfo::hasSubClassEq and use it to check for compatible
register classes instead of trying to list all register classes in
X86's getLoadStoreRegOpcode.
llvm-svn: 132398
after folding ADD32ri to ADD32mi, so don't do that.
This only happens when the greedy register allocator gets itself in trouble and
spills %vreg9 here:
16L %vreg9<def> = MOVPC32r 0, %ESP<imp-use>; GR32:%vreg9
48L %vreg9<def> = ADD32ri %vreg9, <es:_GLOBAL_OFFSET_TABLE_>[TF=1], %EFLAGS<imp-def,dead>; GR32:%vreg9
That should never happen, the live range should be split instead.
llvm-svn: 130625
Now that we have a first-class way to represent unaligned loads, the unaligned
load intrinsics are superfluous.
First part of <rdar://problem/8460511>.
llvm-svn: 129401
regs. This is the only change in this checkin that may affects the
default scheduler. With better register tracking and heuristics, it
doesn't make sense to artificially lower the register limit so much.
Added -sched-high-latency-cycles and X86InstrInfo::isHighLatencyDef to
give the scheduler a way to account for div and sqrt on targets that
don't have an itinerary. It is currently defaults to 10 (the actual
number doesn't matter much), but only takes effect on non-default
schedulers: list-hybrid and list-ilp.
Added several heuristics that can be individually disabled for the
non-default sched=list-ilp mode. This helps us determine how much
better we can do on a given benchmark than the default
scheduler. Certain compute intensive loops run much faster in this
mode with the right set of heuristics, and it doesn't seem to have
much negative impact elsewhere. Not all of the heuristics are needed,
but we still need to experiment to decide which should be disabled by
default for sched=list-ilp.
llvm-svn: 127067
"long latency" enough to hoist even if it may increase spilling. Reloading
a value from spill slot is often cheaper than performing an expensive
computation in the loop. For X86, that means machine LICM will hoist
SQRT, DIV, etc. ARM will be somewhat aggressive with VFP and NEON
instructions.
- Enable register pressure aware machine LICM by default.
llvm-svn: 116781
The reg-reg copies were no longer being generated since copyPhysReg copies
physical registers only.
The loads and stores are not necessary - The TC constraint is imposed by the
TAILJMP and TCRETURN instructions, there should be no need for constrained loads
and stores.
llvm-svn: 116314
reapply: reimplement the second half of the or/add optimization. We should now
with no changes. Turns out that one missing "Defs = [EFLAGS]" can upset things
a bit.
llvm-svn: 116040
only end up emitting LEA instead of OR. If we aren't able to promote
something into an LEA, we should never be emitting it as an ADD.
Add some testcases that we emit "or" in cases where we used to produce
an "add".
llvm-svn: 116026
is general goodness because it allows ORs to be converted to LEA to avoid
inserting copies. However, this is bad because it makes the generated .s
file less obvious and gives valgrind heartburn (tons of false positives in
bitfield code).
While the general fix should be in valgrind, we can at least try to avoid
emitting ADD instructions that *don't* get promoted to LEA. This is more
work because it requires introducing pseudo instructions to represents
"add that knows the bits are disjoint", but hey, people really love valgrind.
This fixes this testcase:
https://bugs.kde.org/show_bug.cgi?id=242137#c20
the add r/i cases are coming next.
llvm-svn: 116007
operands.
With this done, we can remove the _Int suffixes from the round instructions
without the disassembler blowing up. This allows the assembler to support
them, implementing rdar://8456376 - llvm-mc rejects 'roundss'
llvm-svn: 115019
- Make foldMemoryOperandImpl aware of 256-bit zero vectors folding and support the 128-bit counterparts of AVX too.
- Make sure MOV[AU]PS instructions are only selected when SSE1 is enabled, and duplicate the patterns to match AVX.
- Add a testcase for a simple 128-bit zero vector creation.
llvm-svn: 110946
When a register is defined by a partial load:
%reg1234:sub_32 = MOV32mr <fi#-1>; GR64:%reg1234
That load cannot be folded into an instruction using the full 64-bit register.
It would become a 64-bit load.
This is related to the recent change to have isLoadFromStackSlot return false on
a sub-register load.
llvm-svn: 110874
We do sometimes load from a too small stack slot when dealing with x86 arguments
(varargs and smaller-than-32-bit args). It looks like we know what we are doing
in those cases, so I am going to remove the assert instead of artifically
enlarging stack slot sizes.
The assert in storeRegToStackSlot stays in. We don't want to write beyond the
bounds of a stack slot.
llvm-svn: 109764
subregister operands like this:
%reg1040:sub_32bit<def> = MOV32rm <fi#-2>, 1, %reg0, 0, %reg0, %reg1040<imp-def>; mem:LD4[FixedStack-2](align=8)
Make them return false when subreg operands are present. VirtRegRewriter is
making bad assumptions otherwise.
This fixes PR7713.
llvm-svn: 109489
rip out the implementation of X86InstrInfo::GetInstSizeInBytes.
The code being ripped out just implemented a copy and hacked up
version of the (old) instruction encoder, and is buggy and
terrible in other ways. Since "GetInstSizeInBytes" is really
only there to support the JIT's "NeedsExactSize" hook (which
noone is using), just rip out the code. I will rip out the
NeedsExactSize hook next.
This resolves rdar://7617809 - switch X86InstrInfo::GetInstSizeInBytes to use X86MCCodeEmitter
llvm-svn: 109149
1) all registers were spilled as xmm, regardless of actual size
2) win64 abi doesn't do the varargs-size-in-%al thing
Still to look into:
xmm6-15 are marked as clobbered by call instructions on win64 even though they aren't.
llvm-svn: 109035
getMinimalPhysRegClass. It was used to produce spills, and it is better to
use the most specific class if possible.
Update getLoadStoreRegOpcode to handle GR32_AD.
llvm-svn: 108115
Based on a patch by Rafael Espíndola.
Attempt to make the FpSET_ST1 hack more robust, but we are still relying on
FpSET_ST0 preceeding it. This is only for supporting really weird x87 inline
asm.
We support:
FpSET_ST0
INLINEASM
FpSET_ST0
FpSET_ST1
INLINEASM
with and without kills on the arguments. We don't support:
FpSET_ST1
FpSET_ST0
INLINEASM
nor
FpSET_ST1
INLINEASM
Just Don't Do It!
llvm-svn: 108047
- Check getBytesToPopOnReturn().
- Eschew ST0 and ST1 for return values.
- Fix the PIC base register initialization so that it doesn't ever
fail to end up the top of the entry block.
llvm-svn: 108039
notes:
- The instructions are being added with dummy placeholder patterns using some 256
specifiers, this is not meant to work now, but since there are some multiclasses
generic enough to accept them, when we go for codegen, the stuff will be already
there.
- Add VEX encoding bits to support YMM
- Add MOVUPS and MOVAPS in the first round
- Use "Y" as suffix for those Instructions: MOVUPSYrr, ...
- All AVX instructions in X86InstrSSE.td will move soon to a new X86InstrAVX
file.
llvm-svn: 107996
like all other instructions, even though a segment is not
allowed. This resolves a bunch of gross hacks in the
encoder and makes LEA more consistent with the rest of the
instruction set.
No functionality change.
llvm-svn: 107934
EXTRACT_SUBREG no longer appears as a machine instruction. Use COPY instead.
Add isCopy() checks in many places using isMoveInstr() and isExtractSubreg().
The isMoveInstr hook will be removed later.
llvm-svn: 107879
- X86 unfolding should check if the instructions being unfolded has memoperands.
If there is no memoperands, then it must assume conservative alignment. If this
would introduce an expensive sse unaligned load / store, then unfoldMemoryOperand
etc. should not unfold the instruction.
llvm-svn: 107509
addresses a longstanding deficiency noted in many FIXMEs scattered
across all the targets.
This effectively moves the problem up one level, replacing eleven
FIXMEs in the targets with eight FIXMEs in CodeGen, plus one path
through FastISel where we actually supply a DebugLoc, fixing Radar
7421831.
llvm-svn: 106243
instruction defines subregisters.
Any existing subreg indices on the original instruction are preserved or
composed with the new subreg index.
Also substitute multiple operands mentioning the original register by using the
new MachineInstr::substituteRegister() function. This is necessary because there
will soon be <imp-def> operands added to non read-modify-write partial
definitions. This instruction:
%reg1234:foo = FLAP %reg1234<imp-def>
will reMaterialize(%reg3333, bar) like this:
%reg3333:bar-foo = FLAP %reg333:bar<imp-def>
Finally, replace the TargetRegisterInfo pointer argument with a reference to
indicate that it cannot be NULL.
llvm-svn: 105358
This is the beginning of purely symbolic subregister indices, but we need a bit
of jiggling before the explicit numeric indices can be completely removed.
llvm-svn: 104492
otherwise labels get incorrectly merged. We handled this by emitting a
".byte 0", but this isn't correct on thumb/arm targets where the text segment
needs to be a multiple of 2/4 bytes. Handle this by emitting a noop. This
is more gross than it should be because arm/ppc are not fully mc'ized yet.
This fixes rdar://7908505
llvm-svn: 102400
If we have this situation:
jCC L1
jmp L2
L1:
...
L2:
...
We can get a small performance boost by emitting this instead:
jnCC L2
L1:
...
L2:
...
This testcase shows an example of this:
float func(float x, float y) {
double product = (double)x * y;
if (product == 0.0)
return product;
return product - 1.0;
}
llvm-svn: 101075
SSEDomainFix will collapse to the domain with the lower number when it has a
choice. The SSEPackedSingle domain often has smaller instructions, so prefer
that.
llvm-svn: 99952
On Nehalem and newer CPUs there is a 2 cycle latency penalty on using a register
in a different domain than where it was defined. Some instructions have
equvivalents for different domains, like por/orps/orpd.
The SSEDomainFix pass tries to minimize the number of domain crossings by
changing between equvivalent opcodes where possible.
This is a work in progress, in particular the pass doesn't do anything yet. SSE
instructions are tagged with their execution domain in TableGen using the last
two bits of TSFlags. Note that not all instructions are tagged correctly. Life
just isn't that simple.
The SSE execution domain issue is very similar to the ARM NEON/VFP pipeline
issue handled by NEONMoveFixPass. This pass may become target independent to
handle both.
llvm-svn: 99524
This is work in progress. So far, SSE execution domain tables are added to
X86InstrInfo, and a skeleton pass is enabled with -sse-domain-fix.
llvm-svn: 99345
David Majnemer