Summary:
This patch adds support for // UNSUPPORTED: feature. If an excluded feature is found in the list of available features then the test is marked unsupported.
I hope to use this to mark test unsupported if the fail with msan on asan. As well as tests that fail in particular standard modes.
Reviewers: mclow.lists, danalbert
Reviewed By: danalbert
Subscribers: cfe-commits
Differential Revision: http://reviews.llvm.org/D4950
llvm-svn: 215883
Summary:
This patch adds support for LLVM_USE_SANITIZER when being built in-tree and standalone.
This patch does the following things:
1. define the LLVM_USE_SANITIZER option to "" when being built standalone. This also helps show we support it.
2. Translate LLVM_USE_SANITIZER when standalone in a very similar way done in llvm/cmake/HandleLLVMOptions.cmake.
3. Add config.llvm_use_sanitizer to lit.site.cfg.in
4. Add code to translate config.llvm_use_sanitizer's value into the needed compile flags in lit.cfg.
Currently lit.cfg assumes that that the compiler supports '-fno-omit-frame-pointer' while CMakeLists.txt actually checks to see if its supported. We could pass this information to lit but I'm not sure its needed.
Reviewers: mclow.lists, danalbert
Reviewed By: danalbert
Subscribers: cfe-commits
Differential Revision: http://reviews.llvm.org/D4949
llvm-svn: 215872
Summary:
This patch does two things:
CMake Update:
- Add compiler flag checks for -std=c++11 and -std=c++1y and remove check for -std=c++0x.
- Add configuration option LIBCXX_ENABLE_CXX1Y to prevent/allow -std=c++1y from being chosen as the std version. LIBCXX_ENABLE_CXX1Y is set to OFF by default.
- if LIBCXX_ENABLE_CXX1Y is enabled then set LIBCXX_STD_VERSION to c++1y and fail if the compiler does not support -std=c++1y
- If c++1y is not enabled then use c++11 and fail if the compiler does not support c++11.
Lit Update:
- Update lit.site.cfg.in to capture LIBCXX_STD_VERSION information as config.std.
- Remove mentions of has_cxx0X configuration option.
- Check for `--param std=X' passed to lit on the command line.
- Choose the std for the tests either from command line parameter or (if it doesn't exist) the lit.site.cfg.
Reviewers: mclow.lists, danalbert
Reviewed By: danalbert
Subscribers: emaste, rnk, ajwong, danalbert, cfe-commits
Differential Revision: http://reviews.llvm.org/D4329
llvm-svn: 215802
Add initial support for using LIT to run the tests on FreeBSD.
More work may need to be done to add support for FreeBSD but this is a
good initial step.
llvm-svn: 215742
This patch removes the use of the "%c" specifier for getting/setting times.
The semantics of this specifier differ between linux and Mac. I don't believe
the use of this specifier was important to the test.
The following tests now pass on linux.
test/input.output/iostream.format/ext.manip/get_time.pass.cpp
test/input.output/iostream.format/ext.manip/put_time.pass.cpp
llvm-svn: 215417
This patch just adds the required return statements to slice_array::operator=
and mask_array::operator=.
Tests were added to check that the return value is the same as the object assigned
to.
llvm-svn: 215414
Some tests were constructing it with 0, so use -1 as the invalid state
instead.
Reviewers: Marshall Clow
Differential Revision: http://reviews.llvm.org/D4095
llvm-svn: 215301
These tests were marked as failing because the libc implementation does not
use the proper return type on certain math functions. There is other weirdness
that prevents us from defining our own version of these functions.
The failing tests in cmake were separated into their own files so that the rest
failures in the rest of the cmath tests were not hidden.
This was not done for the math.h test since we don't actually supply math.h
llvm-svn: 215275
Linux has a lot of failures caused by not having support for certain
locales. Since these come out as a lot of noise in the test results,
have lit.cfg detect the presence of the various locales used in the
tests and add them to config.available_features as locale.LOCALE_NAME.
This patch also adds REQUIRES: locale.REQUIRED_LOCALE to every test that
I saw failing in this manner. We probably need to add more for all the
tests requiring en_US.UTF-8, but we can do that on an as-needed basis.
One thing that concerns me is how many tests get skipped because of
missing locales (especially in regex/). We should make a point of
splitting up any tests that test default behavior _and_ behavior under a
given locale so that we aren't losing coverage for default behavior.
llvm-svn: 214753
__get_classname() and __bracket_expression were assuming that
char_class_type was ctype_base::mask rather than using
regex_traits<_CharT>::char_class_type.
This change allows char_class_type to be defined to something other than
ctype_base::mask so that the implementation will still work for
platforms with an 8-bit ctype mask (such as Android and OpenBSD).
llvm-svn: 214201
Summary: The polymorphic allocator implementation would greatly benefit by defining virtual functions in the dynlib instead of inline. In order to do that some types are going to have to be available outside of c++1y. This is the first step.
Reviewers: mclow.lists, EricWF
Reviewed By: EricWF
Subscribers: cfe-commits
Differential Revision: http://reviews.llvm.org/D4554
llvm-svn: 213889
std::make_heap is currently implemented by iteratively applying a
siftup-type algorithm. Since sift-up is O(ln n), this gives
std::make_heap a worst case time complexity of O(n ln n).
The C++ standard mandates that std::make_heap make no more than O(3n)
comparisons, this makes our std::make_heap out of spec.
Fix this by introducing an implementation of __sift_down and switch
std::make_heap to create the heap using it.
This gives std::make_heap linear time complexity in the worst case.
This fixes PR20161.
llvm-svn: 213615
Summary:
This patch adds the `<experimental/utility>` header as specified in the latest draft of the library fundamentals TS.
`<experimental/utility>` only contains `class erased_type`.
This patch also updates the documentation to list the `erased_type` class as "initial implementation complete".
Test Plan:
Three test cases where added:
1. Test that `_LIBCPP_VERSION` is defined.
2. Test that `<utility>` has been included.
3. Test that `erased_type` is in the correct namespace and is constexpr default constructible.
Reviewers: mclow.lists
Reviewed By: mclow.lists
Subscribers: cfe-commits
Differential Revision: http://reviews.llvm.org/D4510
llvm-svn: 213226
Signals may result in nanosleep returning with only some of the
requested sleeping performed.
Utilize nanosleep's "time-remaining" out parameter to continue sleeping
when this occurs.
llvm-svn: 210210
Make sure we appropriately retry calls to read if the return result is
less than what we asked for.
Additionally, check and handle IO errors: EINTR results in the read
operation getting restarted; other errors turn into exceptions.
llvm-svn: 210061
random_device::random_device(const string&) wrongly assumes that open
can only validly return a file descriptor greater than zero.
This results in random_device believing that it didn't successfully open
the device causing it to throw in it's constructor, this ends up leaking
a file descriptor.
The fix is simple, don't error on file descriptors which are zero.
llvm-svn: 210060
Other tests in this directory use this type, so it's probably copypasta from
there.
(test_buf only forwards to the superclass in all tests where it's used though,
so I wonder if it can be replaced with just using filebuf / wfilebuf
everywhere?)
llvm-svn: 210019
[syserr.errcat.objects]p4 specifies that
system_category().default_error_condition(ev) map to
error_condition(posv, generic_category()) if ev could map to a POSIX
errno.
Linux reserves up to and including 4095 for errno values, use this as a
bound.
This fixes syserr.errcat.objects/system_category.pass.cpp on Linux.
llvm-svn: 209795
When testing against the system library, there is a relatively minor
ABI breakage that the std::future_errc values have been changed to
avoid using zero. Update the tests that rely on the values being
consistent.
llvm-svn: 208840
These tests haven't been failing on darwin11 or 12 since r189610 when
pr17027 was fixed, but they've been keeping the libc++ bot red by
XPASSing since then.
llvm-svn: 208831
This is as straightforward as it sounds, a renamed from shared_mutex to
shared_timed_mutex.
Note that libcxx .dylib and .so files built with c++14 support need to
be rebuilt.
llvm-svn: 204078
Instead, define explicit specializations for the basic types listed in
the SGI documentation. This solves two problems:
1) Helps avoid silent ODR violations caused by the absence of a
user-supplied __gnu_cxx::hash specialization in cases where a std::hash
specialization exists (e.g. for std::string).
2) __gnu_cxx::hash semantics are slightly different to those of
std::hash (for example, the former may dereference a pointer argument)
so it is inappropriate for __gnu_cxx::hash to receive std::hash
specializations by default.
Differential Revision: http://llvm-reviews.chandlerc.com/D2747
llvm-svn: 203070
pair, and a couple of pair-like implementation detail types. The
C++98/03 and 11 standards all specify that the copy constructor of
pair<int, int> is trivial. However as libc++ tracked the draft C++11
standard over the years, this copy constructor became non-trivial, and
then just recently was corrected back to trivial for C++11.
Unfortunately (for libc++1) the Itanium ABI specifies different calling
conventions for trivial and non-trivial copy constructors. Therefore
currently the C++03 libc++ copy constructor for pair<int, int> is ABI
incompatible with the C++11 libc++ copy constructor for pair<int, int>.
This is Bad(tm). This patch corrects the situation by making this copy
constructor trivial in C++03 mode as well.
Just in case it is needed for an incomplete C++11 compiler, libc++
retains the ability to support pair with rvalue references, but without
defaulted special members. However the pair needs non-trivial special
members to implement this special case, (as it did when clang was in
this place a couple of years ago).
During this work a bug was also found and fixed in
is_trivially_constructible.
And there is a minor drive-by fix in <__config> regarding
__type_visibility__.
A test is updated to ensure that the copy constructor of pair<int, int>
is trivial in both C++03 and C++11. This test will necessarily fail for
a compiler that implements rvalue references but not defaulted special
members.
llvm-svn: 194536
http://lab.llvm.org:8013/builders/libcxx_clang-x86_64-darwin11-RA
lit.py: <string>:230: note: inferred use_system_lib as: False
lit.py: <string>:247: fatal: C++ ABI setting None unsupported for tests
cxx_abi is geting set to None, and the lit script errors out shortly after
that. This patch changes the default of cxx_abi from None to 'libcxxabi'.
This is likely not the right way to fix this problem. However it gets the
buildbot running again. Improvements to this fix are welcome.
llvm-svn: 192609
Linking against libstdc++, rather than libsupc++, is probably better
for people who need to link against clients of libstdc++. Because
libsupc++ is provided only as a static library, its globals are not
shared between the static library and the copy linked into libstdc++.
This has been found to cause at least one test failure.
This also removes a number of symbols which were multiply defined
between libstdc++ and libc++, only when linking with libstdc++.
Differential Revision: http://llvm-reviews.chandlerc.com/D1825
llvm-svn: 192075
iterator, allocator) constructor with the intention of it being
implicitly converted to the allocator type, it is possible for overload
resolution to favour the (iterator, iterator, enable_if) constructor.
Eliminate this possibility by moving the enable_if to one of the
existing arguments and removing the third argument.
llvm-svn: 191145
- The lit builtin XFAIL handling is more restrictive than what we were
previously using, and for now I'd rather keep the lit one restrictive.
llvm-svn: 189692
Eric Fiselier