Darwin prologues save their GPRs in two stages: a narrow push of r0-r7 & lr,
followed by a wide push of the remaining registers if there are any. AAPCS uses
a single push.w instruction.
It turns out that, on average, enough registers get pushed that code is smaller
in the AAPCS prologue, which is a nice property for M-class programmers. They
also have other options available for back-traces, so can hopefully deal with
the fact that FP & LR aren't adjacent in memory.
rdar://problem/15909583
llvm-svn: 209895
The C and C++ semantics for compare_exchange require it to return a bool
indicating success. This gets mapped to LLVM IR which follows each cmpxchg with
an icmp of the value loaded against the desired value.
When lowered to ldxr/stxr loops, this extra comparison is redundant: its
results are implicit in the control-flow of the function.
This commit makes two changes: it replaces that icmp with appropriate PHI
nodes, and then makes sure earlyCSE is called after expansion to actually make
use of the opportunities revealed.
I've also added -{arm,aarch64}-enable-atomic-tidy options, so that
existing fragile tests aren't perturbed too much by the change. Many
of them either rely on undef/unreachable too pervasively to be
restored to something well-defined (particularly while making sure
they test the same obscure assert from many years ago), or depend on a
particular CFG shape, which is disrupted by SimplifyCFG.
rdar://problem/16227836
llvm-svn: 209883
Cortex-M4 only has single-precision floating point support, so any LLVM
"double" type will have been split into 2 i32s by now. Fortunately, the
consecutive-register framework turns out to be precisely what's needed to
reconstruct the double and follow AAPCS-VFP correctly!
rdar://problem/17012966
llvm-svn: 209650
This intrinsic permits the emission of platform specific undefined sequences.
ARM has reserved the 0xde opcode which takes a single integer parameter (ignored
by the CPU). This permits the operating system to implement custom behaviour on
this trap. The llvm.arm.undefined intrinsic is meant to provide a means for
generating the target specific behaviour from the frontend. This is
particularly useful for Windows on ARM which has made use of a series of these
special opcodes.
llvm-svn: 209390
This corrects the emission of IMAGE_REL_ARM_MOV32T relocations. Previously, we
were avoiding the high portion of the relocation too early. If there was a
section-relative relocation with an offset greater than 16-bits (65535), you
would end up truncating the high order bits of the offset. Allow the current
relocation representation to flow through out the MC layer to the object writer.
Use the new ability to restrict recorded relocations to avoid emitting the
relocation into the final object.
llvm-svn: 209337
Although the previous code would construct a bundle and add the correct elements
to it, it would not finalise the bundle. This resulted in the InternalRead
markers not being added to the MachineOperands nor, more importantly, the
externally visible defs to the bundle itself. So, although the bundle was not
exposing the def, the generated code would be correct because there was no
optimisations being performed. When optimisations were enabled, the post
register allocator would kick in, and the hazard recognizer would reorder
operations around the load which would define the value being operated upon.
Rather than manually constructing the bundle, simply construct and finalise the
bundle via the finaliseBundle call after both MIs have been emitted. This
improves the code generation with optimisations where IMAGE_REL_ARM_MOV32T
relocations are emitted.
The changes to the other tests are the result of the bundle generation
preventing the scheduler from hoisting the moves across the loads. The net
effect of the generated code is equivalent, but, is much more identical to what
is actually being lowered.
llvm-svn: 209267
- On ARM/ARM64 we get a vrev because the shuffle matching code is really smart. We still unroll anything that's not v4i32 though.
- On X86 we get a pshufb with SSSE3. Required more cleverness in isShuffleMaskLegal.
- On PPC we get a vperm for v8i16 and v4i32. v2i64 is unrolled.
llvm-svn: 209123
Rather than create a series of function calls to setup the library calls, create
a table with the information and just use the table to drive the configuration
of the library calls. This makes it easier to both inspect the list as well as
to modify it. NFC.
llvm-svn: 209089
Windows on ARM uses R11 for the frame pointer even though the environment is a
pure Thumb-2, thumb-only environment. Replicate this behaviour to improve
Windows ABI compatibility. This register is used for fast stack walking, and
thus is part of the Windows ABI.
llvm-svn: 209085
Use the ARMBaseRegisterInfo to query the frame register. The base register info
is aware of the frame register that is used for the frame pointer. Use that to
determine the frame register rather than duplicating the knowledge. Although,
the code path is slightly different in that it may return SP, that can only
occur if the frame pointer has been omitted in the machine function, which is
supposed to contain the desired value in that case.
llvm-svn: 209084
This is mostly a mechanical change changing all the call sites to the newer
chained-function construction pattern. This removes the horrible 15-parameter
constructor for the CallLoweringInfo in favour of setting properties of the call
via chained functions. No functional change beyond the removal of the old
constructors are intended.
llvm-svn: 209082
WoA uses COFF, not ELF. ARMISelLowering::createTLOF would previously return ELF
for any non-MachO platform. This was a missed site when the original change for
target format support for Windows on ARM was done.
llvm-svn: 209057
Add some Windows on ARM specific library calls. These are provided by msvcrt,
and can be used to perform integer to floating-point conversions (and
vice-versa) mirroring similar functions in the RTABI.
llvm-svn: 208949
The UDF instruction is a reserved undefined instruction space. The assembler
mnemonic was introduced with ARM ARM rev C.a. The instruction is not predicated
and the immediate constant is ignored by the CPU. Add support for the three
encodings for this instruction.
The changes to the invalid instruction test is due to the fact that the invalid
instructions actually overlap with the undefined instruction. Introduction of
the new instruction results in a partial decode as an undefined sequence. Drop
the tests as they are invalid instruction patterns anyways.
llvm-svn: 208751
This commit was already commited as revision rL208689 and discussd in
phabricator revision D3704.
But the test file was crashing on OS X and windows.
I fixed the test file in the same way as in rL208340.
llvm-svn: 208711
The current patterns for REV16 misses mostn __builtin_bswap16() due to
legalization promoting the operands to from load/stores toi32s and then
truncing/extending them. This patch adds new patterns that catch the resultant
DAGs and codegens them to rev16 instructions. Tests included.
rdar://15353652
llvm-svn: 208620
We must validate the value type in TLI::getRegisterByName, because if we
don't and the wrong type was used with the IR intrinsic, then we'll assert
(because we won't be able to find a valid register class with which to
construct the requested copy operation). For PPC64, additionally, the type
information is necessary to decide between the 64-bit register and the 32-bit
subregister.
No functionality change.
llvm-svn: 208508
This patch adds support to ARM for custom lowering of the
llvm.{u|s}add.with.overflow.i32 intrinsics for i32/i64. This is particularly useful
for handling idiomatic saturating math functions as generated by
InstCombineCompare.
Test cases included.
rdar://14853450
llvm-svn: 208435
When using the ARM AAPCS, HFAs (Homogeneous Floating-point Aggregates) must
be passed in a block of consecutive floating-point registers, or on the stack.
This means that unused floating-point registers cannot be back-filled with
part of an HFA, however this can currently happen. This patch, along with the
corresponding clang patch (http://reviews.llvm.org/D3083) prevents this.
llvm-svn: 208413
Handle lowering of global addresses for PIC mode compilation on Windows. Always
use the movw/movt load to load the address as Windows on ARM requires ARMv7+ and
is a pure Thumb environment.
llvm-svn: 208385
This adds FK_SecRel_2 relocation support to ARM. This enables the building of
object files for armv7-windows-msvc which enables CodeView line tables for
debugging as opposed to armv7-windows-itanium which currently uses DWARF.
llvm-svn: 208273
Mark up additional instructions which are part of the function prologue as
MachineFrameSetup. These instructions are part of the function prologue,
emitted by the PEI pass to setup the stack for use in the activating frame.
llvm-svn: 208153
The ARM::BLX instruction is an ARM mode instruction. The Windows on ARM target
is limited to Thumb instructions. Correctly use the thumb mode tBLXr
instruction. This would manifest as an errant write into the object file as the
instruction is 4-bytes in length rather than 2. The result would be a corrupted
object file that would eventually result in an executable that would crash at
runtime.
llvm-svn: 208152
remove it from the list of unspilled registers. Otherwise the following
attempt to keep the stack aligned by picking an extra GPR register to
spill will not work as it picks up r11.
llvm-svn: 208129
This patch implements the infrastructure to use named register constructs in
programs that need access to specific registers (bare metal, kernels, etc).
So far, only the stack pointer is supported as a technology preview, but as it
is, the intrinsic can already support all non-allocatable registers from any
architecture.
llvm-svn: 208104
Windows on ARM does not conform to AEABI. However, memset would be emitted
using the AEABI signature, resulting in inverted parameters. Handle this
special case appropriately.
llvm-svn: 207943
Add handling for FK_SecRel_4 (4-byte section relative relocations). These are
used by the generation of DWARF debug information (the abbrevations use section
relative relocations). This will also be used in generation of CodeView line
tables.
llvm-svn: 207941
The fix itself is fairly simple: move getAccessVariant to MCValue so that we
replace the old weak expression evaluation with the far more general
EvaluateAsRelocatable.
This then requires that EvaluateAsRelocatable stop when it finds a non
trivial reference kind. And that in turn requires the ELF writer to look
harder for weak references.
Last but not least, this found a case where we were being bug by bug
compatible with gas and accepting an invalid input. I reported pr19647
to track it.
llvm-svn: 207920
We currently force symbols to be globals in .thumb_set. The intent
seems to be that given
.thumb_set foo, bar
we emit an undefined symbol to bar if it is never defined. The side
effect is that we mark bar as global, even if it is defined, which gas
does not.
Producing an undefined reference to bar is a general difference from MC and gas.
For example, given
a = b
gas will produce an undefined reference to b, MC will not. I would be surprised
if any code depends on this, but it it does, we should fix the general
difference, not special case .thumb_set.
llvm-svn: 207757
This fixes the memory leak introduced with the initial addition of support for
WoA stack probing. Now that the pseudo-instruction expansion can handle an
external symbol, use that to generate the load which simplifies the logic as
well as avoids the memory leak.
llvm-svn: 207737
This enhances the expansion of the mov32imm pseudo-instruction to support an
external symbol reference. This is motivated by a simplification of the stack
probe emission for Windows on ARM (and fixing a leak).
llvm-svn: 207736
This introduces the stack lowering emission of the stack probe function for
Windows on ARM. The stack on Windows on ARM is a dynamically paged stack where
any page allocation which crosses a page boundary of the following guard page
will cause a page fault. This page fault must be handled by the kernel to
ensure that the page is faulted in. If this does not occur and a write access
any memory beyond that, the page fault will go unserviced, resulting in an
abnormal program termination.
The watermark for the stack probe appears to be at 4080 bytes (for
accommodating the stack guard canaries and stack alignment) when SSP is
enabled. Otherwise, the stack probe is emitted on the page size boundary of
4096 bytes.
llvm-svn: 207615
Emit the COFF header when printing out the function. This is important as the
header contains two important pieces of information: the storage class for the
symbol and the symbol type information. This bit of information is required for
the linker to correctly identify the type of symbol that it is dealing with.
llvm-svn: 207613
When building with -Werror=covered-switch-default (as on the buildbots), the
build would fail since all cases are covered by the switch. Move the
llvm_unreachable to the end of the function as an annotation.
llvm-svn: 207609
IMAGE_REL_ARM_MOV32T relocations require that the movw/movt pair-wise
relocation is not split up and reordered. When expanding the mov32imm
pseudo-instruction, create a bundle if the machine operand is referencing an
address. This helps ensure that the relocatable address load is not reordered
by subsequent passes.
Unfortunately, this only partially handles the case as the Constant Island Pass
occurs after the instructions are unbundled and does not properly handle
bundles. That is a more fundamental issue with the pass itself and beyond the
scope of this change.
llvm-svn: 207608
This patch centralizes the handling of the thumb bit around
MCStreamer::isThumbFunc and makes isThumbFunc handle aliases.
This fixes a corner case, but the main advantage is having just one
way to check if a MCSymbol is thumb or not. This should still be
refactored to be ARM only, but at least now it is just one predicate
that has to be refactored instead of 3 (isThumbFunc,
ELF_Other_ThumbFunc, and SF_ThumbFunc).
llvm-svn: 207522
It's bad enough that I have to look up 5 different levels of TableGen class
definitions to work out what bits go where in a simple NEON instruction anyway,
without having to keep track of umpteen unused parameters.
llvm-svn: 207420
Only the object streamers need to track if a symbol should be marked thumb or
not. This ports the ELF case. The COFF case is not ported since it is currently
not working for some other reason (I will report a bug).
llvm-svn: 207366
Introduce support for WoA PE/COFF object file emission from LLVM. Add the new
target specific PE/COFF Streamer (ARMWinCOFFStreamer) that handles the ARM
specific behaviour of PE/COFF object emission. ARM exception information is not
yet emitted and is a TODO item.
The ARM specific object writer (ARMWinCOFFObjectWriter) handles the ARM specific
relocation handling in conjunction with the WinCOFFObjectWriter in the MC layer.
The MC layer needs to be updated to deal with the relocation adjustments.
Branch relocations are adjusted by 4 bytes (unlikely their ELF counterparts).
Minor tweaks to switch multiple conditional checks into equivalent switch
statements. The ObjectFileInfo is updated to relax the object file setup for
Windows COFF. Move the architecture checks into an assertion. Windows COFF is
currently only supported on x86, x86_64, and ARM (thumb). Rather than
defaulting to ELF, we will refuse to generate an object file. This is better
though as you do not get an (arbitrary) object file which is different from the
request.
llvm-svn: 207345
Currently, the integrated assembler is the only choice for assembling Windows on
ARM binaries. IAS supports the .file <filename> directive which emits the file
symbol into the resulting object binary. Mark the GNU COFF information to
indicate support for this feature.
llvm-svn: 207341
Otherwise the legalizer would just scalarize everything. Support for
mulhi in the targets isn't that great yet so on most targets we get
exactly the same scalarized output. Add a test for x86 vector udiv.
I had to disable the mulhi nodes on ARM because there aren't any patterns
for it. As far as I know ARM has instructions for getting the high part of
a multiply so this should be fixed.
llvm-svn: 207315
This intrinsic is no longer needed with the new @llvm.arm.hint(i32) intrinsic
which provides a generic, extensible manner for adding hint instructions. This
functionality can now be represented as @llvm.arm.hint(i32 5).
llvm-svn: 207246
Introduce the llvm.arm.hint(i32) intrinsic that can be used to inject hints into
the instruction stream. This is particularly useful for generating IR from a
compiler where the user may inject an intrinsic (e.g. __yield). These are then
pattern substituted into the correct instruction which already existed.
llvm-svn: 207242
This is similar to the 'tail' marker, except that it guarantees that
tail call optimization will occur. It also comes with convervative IR
verification rules that ensure that tail call optimization is possible.
Reviewers: nicholas
Differential Revision: http://llvm-reviews.chandlerc.com/D3240
llvm-svn: 207143
I discovered this const-hole while attempting to coalesnce the Symbol
and SymbolMap data structures. There's some pending issues with that,
but I figured this change was easy to flush early.
llvm-svn: 207124
Added support for bytes replication feature, so it could be GAS compatible.
E.g. instructions below:
"vmov.i32 d0, 0xffffffff"
"vmvn.i32 d0, 0xabababab"
"vmov.i32 d0, 0xabababab"
"vmov.i16 d0, 0xabab"
are incorrect, but we could deal with such cases.
For first one we should emit:
"vmov.i8 d0, 0xff"
For second one ("vmvn"):
"vmov.i8 d0, 0x54"
For last two instructions it should emit:
"vmov.i8 d0, 0xab"
P.S.: In ARMAsmParser.cpp I have also fixed few nearby style issues in old code.
Just for keeping method bodies in harmony with themselves.
llvm-svn: 207080
For now it contains a single flag, SanitizeAddress, which enables
AddressSanitizer instrumentation of inline assembly.
Patch by Yuri Gorshenin.
llvm-svn: 206971
diagnostic that includes location information.
Currently if one has this assembly:
.quad (0x1234 + (4 * SOME_VALUE))
where SOME_VALUE is undefined ones gets the less than
useful error message with no location information:
% clang -c x.s
clang -cc1as: fatal error: error in backend: expected relocatable expression
With this fix one now gets a more useful error message
with location information:
% clang -c x.s
x.s:5:8: error: expected relocatable expression
.quad (0x1234 + (4 * SOME_VALUE))
^
To do this I plumbed the SMLoc through the MCObjectStreamer
EmitValue() and EmitValueImpl() interfaces so it could be used
when creating the MCFixup.
rdar://12391022
llvm-svn: 206906
The point of these calls is to allow Thumb-1 code to make use of the VFP unit
to perform its operations. This is not desirable with -msoft-float, since most
of the reasons you'd want that apply equally to the runtime library.
rdar://problem/13766161
llvm-svn: 206874
system headers above the includes of generated '.inc' files that
actually contain code. In a few targets this was already done pretty
consistently, but it wasn't done *really* consistently anywhere. It is
strictly cleaner IMO and necessary in a bunch of places where the
DEBUG_TYPE is referenced from the generated code. Consistency with the
necessary places trumps. Hopefully the build bots are OK with the
movement of intrin.h...
llvm-svn: 206838
behavior based on other files defining DEBUG_TYPE, which means it cannot
define DEBUG_TYPE at all. This is actually better IMO as it forces folks
to define relevant DEBUG_TYPEs for their files. However, it requires all
files that currently use DEBUG(...) to define a DEBUG_TYPE if they don't
already. I've updated all such files in LLVM and will do the same for
other upstream projects.
This still leaves one important change in how LLVM uses the DEBUG_TYPE
macro going forward: we need to only define the macro *after* header
files have been #include-ed. Previously, this wasn't possible because
Debug.h required the macro to be pre-defined. This commit removes that.
By defining DEBUG_TYPE after the includes two things are fixed:
- Header files that need to provide a DEBUG_TYPE for some inline code
can do so by defining the macro before their inline code and undef-ing
it afterward so the macro does not escape.
- We no longer have rampant ODR violations due to including headers with
different DEBUG_TYPE definitions. This may be mostly an academic
violation today, but with modules these types of violations are easy
to check for and potentially very relevant.
Where necessary to suppor headers with DEBUG_TYPE, I have moved the
definitions below the includes in this commit. I plan to move the rest
of the DEBUG_TYPE macros in LLVM in subsequent commits; this one is big
enough.
The comments in Debug.h, which were hilariously out of date already,
have been updated to reflect the recommended practice going forward.
llvm-svn: 206822
expressions for mov instructions instead of silently truncating by default.
For the ARM assembler, we want to avoid misleadingly allowing something
like "mov r0, <symbol>" especially when we turn it into a movw and the
expression <symbol> does not have a :lower16: or :upper16" as part of the
expression. We don't want the behavior of silently truncating, which can be
unexpected and lead to bugs that are difficult to find since this is an easy
mistake to make.
This does change the previous behavior of llvm but actually matches an
older gnu assembler that would not allow this but print less useful errors
of like “invalid constant (0x927c0) after fixup” and “unsupported relocation on
symbol foo”. The error for llvm is "immediate expression for mov requires
:lower16: or :upper16" with correct location information on the operand
as shown in the added test cases.
rdar://12342160
llvm-svn: 206669
Still only 32-bit ARM using it at this stage, but the promotion allows
direct testing via opt and is a reasonably self-contained patch on the
way to switching ARM64.
At this point, other targets should be able to make use of it without
too much difficulty if they want. (See ARM64 commit coming soon for an
example).
llvm-svn: 206485
ARM64 suffered multiple -verify-machineinstr failures (principally over the
xsp/xzr issue) because FastISel was completely ignoring which subset of the
general-purpose registers each instruction required.
More fixes are coming in ARM64 specific FastISel, but this should cover the
generic problems.
llvm-svn: 206283
This patch re-introduces the MCContext member that was removed from
MCDisassembler in r206063, and requires that an MCContext be passed in at
MCDisassembler construction time. (Previously the MCContext member had been
initialized in an ad-hoc fashion after construction). The MCCContext member
can be used by MCDisassembler sub-classes to construct constant or
target-specific MCExprs.
This patch updates disassemblers for in-tree targets, and provides the
MCRegisterInfo instance that some disassemblers were using through the
MCContext (previously those backends were constructing their own
MCRegisterInfo instances).
llvm-svn: 206241
alignments on vld/vst instructions. And report errors for
alignments that are not supported.
While this is a large diff and an big test case, the changes
are very straight forward. But pretty much had to touch
all vld/vst instructions changing the addrmode to one of the
new ones that where added will do the proper checking for
the specific instruction.
FYI, re-committing this with a tweak so MemoryOp's default
constructor is trivial and will work with MSVC 2012. Thanks
to Reid Kleckner and Jim Grosbach for help with the tweak.
rdar://11312406
llvm-svn: 205986
It doesn't build with MSVC 2012, because MSVC doesn't allow union
members that have non-trivial default constructors. This change added
'SMLoc AlignmentLoc' to MemoryOp, which made MemoryOp's default ctor
non-trivial.
This reverts commit r205930.
llvm-svn: 205944
alignments on vld/vst instructions. And report errors for
alignments that are not supported.
While this is a large diff and an big test case, the changes
are very straight forward. But pretty much had to touch
all vld/vst instructions changing the addrmode to one of the
new ones that where added will do the proper checking for
the specific instruction.
rdar://11312406
llvm-svn: 205930
This consolidates the duplicated MachO checks in the directive parsing for
various directives that are unsupported for Mach-O. The error message change is
unimportant as this restores the behaviour to that prior to the addition of the
new directive handling. Furthermore, use a more direct check for MachO
targeting rather than an indirect feature check of the assembler.
Also simplify the test execution command to avoid temporary files. Further more,
perform the check in both object and assembly emission.
Whether all non-applicable directives are handled is another question. .fnstart
is marked as being unsupported, however, the complementary .fnend is not. The
additional unwinding directives are also still honoured. This change does not
change that, though, it would be good to validate and mark them as being
unsupported if they are unsupported for the MachO emission.
llvm-svn: 205678
Removed "GNU Assembler extension (compatibility)" definitions from ARMInstrInfo.td
Fixed ARMAsmParser::ParseInstruction GNU compatability branch, so it also works for thumb mode from now.
Added new tests.
llvm-svn: 205622
Implementing this via ComputeMaskedBits has two advantages:
+ It actually works. DAGISel doesn't deal with the chains properly
in the previous pattern-based solution, so they never trigger.
+ The information can be used in other DAG combines, as well as the
trivial "get rid of truncs". For example if the trunc is in a
different basic block.
rdar://problem/16227836
llvm-svn: 205540
The terminal barrier of a cmpxchg expansion will be either Acquire or
SequentiallyConsistent. In either case it can be skipped if the
operation has Monotonic requirements on failure.
rdar://problem/15996804
llvm-svn: 205535
The previous situation where ATOMIC_LOAD_WHATEVER nodes were expanded
at MachineInstr emission time had grown to be extremely large and
involved, to account for the subtly different code needed for the
various flavours (8/16/32/64 bit, cmpxchg/add/minmax).
Moving this transformation into the IR clears up the code
substantially, and makes future optimisations much easier:
1. an atomicrmw followed by using the *new* value can be more
efficient. As an IR pass, simple CSE could handle this
efficiently.
2. Making use of cmpxchg success/failure orderings only has to be done
in one (simpler) place.
3. The common "cmpxchg; did we store?" idiom can be exposed to
optimisation.
I intend to gradually improve this situation within the ARM backend
and make sure there are no hidden issues before moving the code out
into CodeGen to be shared with (at least ARM64/AArch64, though I think
PPC & Mips could benefit too).
llvm-svn: 205525
The trouble as in ARMAsmParser, in ParseInstruction method. It assumes that ARM::R12 + 1 == ARM::SP.
It is wrong, since ARM::<Register> codes are generated by tablegen and actually could be any random numbers.
llvm-svn: 205524
add operation since extract_vector_elt can perform an extend operation. Get the input lane
type from the vector on which we're performing the vpaddl operation on and extend or
truncate it to the output type of the original add node.
llvm-svn: 205523
Just pass a MachineInstr reference rather than an MBB iterator.
Creating a MachineInstr& is the first thing every implementation did
anyway.
llvm-svn: 205453
Unlike other v6+ processors, cortex-m0 never supports unaligned accesses.
From the v6m ARM ARM:
"A3.2 Alignment support: ARMv6-M always generates a fault when an unaligned
access occurs."
rdar://16491560
llvm-svn: 205452
ARM specific optimiztion, finding places in ARM machine code where 2 dmbs
follow one another, and eliminating one of them.
Patch by Reinoud Elhorst.
llvm-svn: 205409
The Cyclone CPU is similar to swift for most LLVM purposes, but does have two
preferred instructions for zeroing a VFP register. This teaches LLVM about
them.
llvm-svn: 205309
Issue subject: Crash using integrated assembler with immediate arithmetic
Fix description:
Expressions like 'cmp r0, #(l1 - l2) >> 3' could not be evaluated on asm parsing stage,
since it is impossible to resolve labels on this stage. In the end of stage we still have
expression (MCExpr).
Then, when we want to encode it, we expect it to be an immediate, but it still an expression.
Patch introduces a Fixup (MCFixup instance), that is processed after main encoding stage.
llvm-svn: 205094
I started trying to fix a small issue, but this code has seen a small fix too
many.
The old code was fairly convoluted. Some of the issues it had:
* It failed to check if a symbol difference was in the some section when
converting a relocation to pcrel.
* It failed to check if the relocation was already pcrel.
* The pcrel value computation was wrong in some cases (relocation-pc.s)
* It was missing quiet a few cases where it should not convert symbol
relocations to section relocations, leaving the backends to patch it up.
* It would not propagate the fact that it had changed a relocation to pcrel,
requiring a quiet nasty work around in ARM.
* It was missing comments.
llvm-svn: 205076
Fix description:
Expressions like 'cmp r0, #(l1 - l2) >> 3' could not be evaluated on asm parsing stage,
since it is impossible to resolve labels on this stage. In the end of stage we still have
expression (MCExpr).
Then, when we want to encode it, we expect it to be an immediate, but it still an expression.
Patch introduces a Fixup (MCFixup instance), that is processed after main encoding stage.
llvm-svn: 204899
vector list parameter that is using all lanes "{d0[], d2[]}" but can
match and instruction with a ”{d0, d2}" parameter.
I’m finishing up a fix for proper checking of the unsupported
alignments on vld/vst instructions and ran into this. Thus I don’t
have a test case at this time. And adding all code that will
demonstrate the bug would obscure the very simple one line fix.
So if you would indulge me on not having a test case at this
time I’ll instead offer up a detailed explanation of what is
going on in this commit message.
This instruction:
vld2.8 {d0[], d2[]}, [r4:64]
is not legal as the alignment can only be 16 when the size is 8.
Per this documentation:
A8.8.325 VLD2 (single 2-element structure to all lanes)
<align> The alignment. It can be one of:
16 2-byte alignment, available only if <size> is 8, encoded as a = 1.
32 4-byte alignment, available only if <size> is 16, encoded as a = 1.
64 8-byte alignment, available only if <size> is 32, encoded as a = 1.
omitted Standard alignment, see Unaligned data access on page A3-108.
So when code is added to the llvm integrated assembler to not match
that instruction because of the alignment it then goes on to try to match
other instructions and comes across this:
vld2.8 {d0, d2}, [r4:64]
and and matches it. This is because of the method
ARMOperand::isVecListDPairSpaced() is missing the check of the Kind.
In this case the Kind is k_VectorListAllLanes . While the name of the method
may suggest that this is OK it really should check that the Kind is
k_VectorList.
As the method ARMOperand::isDoubleSpacedVectorAllLanes() is what was
used to match {d0[], d2[]} and correctly checks the Kind:
bool isDoubleSpacedVectorAllLanes() const {
return Kind == k_VectorListAllLanes && VectorList.isDoubleSpaced;
}
where the original ARMOperand::isVecListDPairSpaced() does not check
the Kind:
bool isVecListDPairSpaced() const {
if (isSingleSpacedVectorList()) return false;
return (ARMMCRegisterClasses[ARM::DPairSpcRegClassID]
.contains(VectorList.RegNum));
}
Jim Grosbach has reviewed the change and said: Yep, that sounds right. …
And by "right" I mean, "wow, that's a nasty latent bug I'm really, really
glad to see fixed." :)
rdar://16436683
llvm-svn: 204861
We've already got versions without the barriers, so this just adds IR-level
support for generating the new v8 ones.
rdar://problem/16227836
llvm-svn: 204813
After some discussion on IRC, emitting a call to the library function seems
like a better default, since it will move from a compiler internal error to
a linker error, that the user can work around until LLVM is fixed.
I'm also adding a note on the responsibility of the user to confirm that
the cache was cleared on platforms where nothing is done.
llvm-svn: 204806
Implementing the LLVM part of the call to __builtin___clear_cache
which translates into an intrinsic @llvm.clear_cache and is lowered
by each target, either to a call to __clear_cache or nothing at all
incase the caches are unified.
Updating LangRef and adding some tests for the implemented architectures.
Other archs will have to implement the method in case this builtin
has to be compiled for it, since the default behaviour is to bail
unimplemented.
A Clang patch is required for the builtin to be lowered into the
llvm intrinsic. This will be done next.
llvm-svn: 204802
When a label is parsed, check if there is type information available for the
label. If so, check if the symbol is a function. If the symbol is a function
and we are in thumb mode and no explicit thumb_func has been emitted, adjust the
symbol data to indicate that the function definition is a thumb function.
The application of this inferencing is improved value handling in the object
file (the required thumb bit is set on symbols which are thumb functions). It
also helps improve compatibility with binutils.
The one complication that arises from this handling is the MCAsmStreamer. The
default implementation of getOrCreateSymbolData in MCStreamer does not support
tracking the symbol data. In order to support the semantics of thumb functions,
track symbol data in assembly streamer. Although O(n) in number of labels in
the TU, this is already done in various other streamers and as such the memory
overhead is not a practical concern in this scenario.
llvm-svn: 204544
Sicne MBB->computeRegisterLivenes() returns Dead for sub regs like s0,
d0 is used in vpop instead of updating sp, which causes s0 dead before
its use.
This patch checks the liveness of each subreg to make sure the reg is
actually dead.
llvm-svn: 204411
Given
bar = foo + 4
.long bar
MC would eat the 4. GNU as includes it in the relocation. The rule seems to be
that a variable that defines a symbol is used in the relocation and one that
does not define a symbol is evaluated and the result included in the relocation.
Fixing this unfortunately required some other changes:
* Since the variable is now evaluated, it would prevent the ELF writer from
noticing the weakref marker the elf streamer uses. This patch then replaces
that with a VariantKind in MCSymbolRefExpr.
* Using VariantKind then requires us to look past other VariantKind to see
.weakref bar,foo
call bar@PLT
doing this also fixes
zed = foo +2
call zed@PLT
so that is a good thing.
* Looking past VariantKind means that the relocation selection has to use
the fixup instead of the target.
This is a reboot of the previous fixes for MC. I will watch the sanitizer
buildbot and wait for a build before adding back the previous fixes.
llvm-svn: 204294
The revision I'm reverting breaks handling of transitive aliases. This blocks us
and breaks sanitizer bootstrap:
http://lab.llvm.org:8011/builders/sanitizer-x86_64-linux-bootstrap/builds/2651
(and checked locally by Alexey).
This revision is the result of:
svn merge -r204059:204058 -r204028:204027 -r203962:203961 .
+ the regression test added to test/MC/ELF/alias.s
Another way to reproduce the regression with clang:
$ cat q.c
void a1();
void a2() __attribute__((alias("a1")));
void a3() __attribute__((alias("a2")));
void a1() {}
$ ~/work/llvm-build/bin/clang-3.5-good -c q.c && mv q.o good.o && \
~/work/llvm-build/bin/clang-3.5-bad -c q.c && mv q.o bad.o && \
objdump -t good.o bad.o
good.o: file format elf64-x86-64
SYMBOL TABLE:
0000000000000000 l df *ABS* 0000000000000000 q.c
0000000000000000 l d .text 0000000000000000 .text
0000000000000000 l d .data 0000000000000000 .data
0000000000000000 l d .bss 0000000000000000 .bss
0000000000000000 l d .comment 0000000000000000 .comment
0000000000000000 l d .note.GNU-stack 0000000000000000 .note.GNU-stack
0000000000000000 l d .eh_frame 0000000000000000 .eh_frame
0000000000000000 g F .text 0000000000000006 a1
0000000000000000 g F .text 0000000000000006 a2
0000000000000000 g F .text 0000000000000006 a3
bad.o: file format elf64-x86-64
SYMBOL TABLE:
0000000000000000 l df *ABS* 0000000000000000 q.c
0000000000000000 l d .text 0000000000000000 .text
0000000000000000 l d .data 0000000000000000 .data
0000000000000000 l d .bss 0000000000000000 .bss
0000000000000000 l d .comment 0000000000000000 .comment
0000000000000000 l d .note.GNU-stack 0000000000000000 .note.GNU-stack
0000000000000000 l d .eh_frame 0000000000000000 .eh_frame
0000000000000000 g F .text 0000000000000006 a1
0000000000000000 g F .text 0000000000000006 a2
0000000000000000 g .text 0000000000000000 a3
llvm-svn: 204137
Add an assertion that a valid section is referenced. The potential NULL pointer
dereference was identified by the clang static analyzer.
llvm-svn: 204114
This performs the equivalent of a .set directive in that it creates a symbol
which is an alias for another symbol or value which may possibly be yet
undefined. This directive also has the added property in that it marks the
aliased symbol as being a thumb function entry point, in the same way that the
.thumb_func directive does.
The current implementation fails one test due to an unrelated issue. Functions
within .thumb sections are not marked as thumb_func. The result is that
the aliasee function is not valued correctly.
llvm-svn: 204059
operator* on the by-operand iterators to return a MachineOperand& rather than
a MachineInstr&. At this point they almost behave like normal iterators!
Again, this requires making some existing loops more verbose, but should pave
the way for the big range-based for-loop cleanups in the future.
llvm-svn: 203865
This is a follow-up to r203635. Saleem pointed out that since symbolic register
names are much easier to read, it would be good if we could turn them off only
when we really need to because we're using an external assembler.
Differential Revision: http://llvm-reviews.chandlerc.com/D3056
llvm-svn: 203806
Support to the IAS was added to actually parse and handle the complex SO
expressions. However, the object file lowering was not updated to compensate
for the fact that the shift operand may be an absolute expression.
When trying to assemble to an object file, the lowering would fail while
succeeding when emitting purely assembly. Add an appropriate test.
The test case is inspired by the test case provided by Jiangning Liu who also
brought the issue to light.
llvm-svn: 203762
When the list of VFP registers to be saved was non-contiguous (so multiple
vpush/vpop instructions were needed) these were being ordered oddly, as in:
vpush {d8, d9}
vpush {d11}
This led to the layout in memory being [d11, d8, d9] which is ugly and doesn't
match the CFI_INSTRUCTIONs we're generating either (so Dwarf info would be
broken).
This switches the order of vpush/vpop (in both prologue and epilogue,
obviously) so that the Dwarf locations are correct again.
rdar://problem/16264856
llvm-svn: 203655
It seems gas can't handle CFI directives with VFP register names ("d12", etc.).
This broke us trying to build Chromium for Android after 201423.
A gas bug has been filed: https://sourceware.org/bugzilla/show_bug.cgi?id=16694
compnerd suggested making this conditional on whether we're using the integrated
assembler or not. I'll look into that in a follow-up patch.
Differential Revision: http://llvm-reviews.chandlerc.com/D3049
llvm-svn: 203635
Use the options in the ARMISelLowering to control whether tail calls are
optimised or not. Previously, this option was entirely ignored on the ARM
target and only honoured on x86.
This option is mostly useful in profiling scenarios. The default remains that
tail call optimisations will be applied.
llvm-svn: 203577
This option is from 2010, designed to work around a linker issue on Darwin for
ARM. According to grosbach this is no longer an issue and this option can
safely be removed.
llvm-svn: 203576
Tail call optimisation was previously disabled on all targets other than
iOS5.0+. This enables the tail call optimisation on all Thumb 2 capable
platforms.
The test adjustments are to remove the IR hint "tail" to function invocation.
The tests were designed assuming that tail call optimisations would not kick in
which no longer holds true.
llvm-svn: 203575
ATOMIC_STORE operations always get here as a lowered ATOMIC_SWAP, so there's no
need for any code to handle them specially.
There should be no functionality change so no tests.
llvm-svn: 203567
The syntax for "cmpxchg" should now look something like:
cmpxchg i32* %addr, i32 42, i32 3 acquire monotonic
where the second ordering argument gives the required semantics in the case
that no exchange takes place. It should be no stronger than the first ordering
constraint and cannot be either "release" or "acq_rel" (since no store will
have taken place).
rdar://problem/15996804
llvm-svn: 203559
the stack of the analysis group because they are all immutable passes.
This is made clear by Craig's recent work to use override
systematically -- we weren't overriding anything for 'finalizePass'
because there is no such thing.
This is kind of a lame restriction on the API -- we can no longer push
and pop things, we just set up the stack and run. However, I'm not
invested in building some better solution on top of the existing
(terrifying) immutable pass and legacy pass manager.
llvm-svn: 203437
Summary:
llvm/MC/MCSectionMachO.h and llvm/Support/MachO.h both had the same
definitions for the section flags. Instead, grab the definitions out of
support.
No functionality change.
Reviewers: grosbach, Bigcheese, rafael
Reviewed By: rafael
CC: llvm-commits
Differential Revision: http://llvm-reviews.chandlerc.com/D2998
llvm-svn: 203211
The old system was fairly convoluted:
* A temporary label was created.
* A single PROLOG_LABEL was created with it.
* A few MCCFIInstructions were created with the same label.
The semantics were that the cfi instructions were mapped to the PROLOG_LABEL
via the temporary label. The output position was that of the PROLOG_LABEL.
The temporary label itself was used only for doing the mapping.
The new CFI_INSTRUCTION has a 1:1 mapping to MCCFIInstructions and points to
one by holding an index into the CFI instructions of this function.
I did consider removing MMI.getFrameInstructions completelly and having
CFI_INSTRUCTION own a MCCFIInstruction, but MCCFIInstructions have non
trivial constructors and destructors and are somewhat big, so the this setup
is probably better.
The net result is that we don't create temporary labels that are never used.
llvm-svn: 203204
This is a preliminary setup change to support a renaming of Windows target
triples. Split the object file format information out of the environment into a
separate entity. Unfortunately, file format was previously treated as an
environment with an unknown OS. This is most obvious in the ARM subtarget where
the handling for macho on an arbitrary platform switches to AAPCS rather than
APCS (as per Apple's needs).
llvm-svn: 203160
name might indicate, it is an iterator over the types in an instruction
in the IR.... You see where this is going.
Another step of modularizing the support library.
llvm-svn: 202815
This is a temporary workaround for native arm linux builds:
PR18996: Changing regalloc order breaks "lencod" on native arm linux builds.
llvm-svn: 202433
scan the register file for sub- and super-registers.
No functionality change intended.
(Tests are updated because the comments in the assembler output are
different.)
llvm-svn: 202416
.align is handled specially on certain targets. .align without any parameters
on ARM indicates a default alignment (4). Handle the special case in the target
parser, but fall back to the generic parser for the normal version.
llvm-svn: 201988
This adds support for the .short and its alias .hword for adding literal values
into the object file. This is similar to the .word directive, however, rather
than inserting a value of 4 bytes, adds a 2-byte value.
llvm-svn: 201968
This commit moves getSLEB128Size() and getULEB128Size() from
MCAsmInfo to LEB128.h and removes some copy-and-paste code.
Besides, this commit also adds some unit tests for the LEB128
functions.
llvm-svn: 201937
TargetLoweringBase is implemented in CodeGen, so before this patch we had
a dependency fom Target to CodeGen. This would show up as a link failure of
llvm-stress when building with -DBUILD_SHARED_LIBS=ON.
This fixes pr18900.
llvm-svn: 201711
r201608 made llvm corretly handle private globals with MachO. r201622 fixed
a bug in it and r201624 and r201625 were changes for using private linkage,
assuming that llvm would do the right thing.
They all got reverted because r201608 introduced a crash in LTO. This patch
includes a fix for that. The issue was that TargetLoweringObjectFile now has
to be initialized before we can mangle names of private globals. This is
trivially true during the normal codegen pipeline (the asm printer does it),
but LTO has to do it manually.
llvm-svn: 201700
The IR
@foo = private constant i32 42
is valid, but before this patch we would produce an invalid MachO from it. It
was invalid because it would use an L label in a section where the liker needs
the labels in order to atomize it.
One way of fixing it would be to just reject this IR in the backend, but that
would not be very front end friendly.
What this patch does is use an 'l' prefix in sections that we know the linker
requires symbols for atomizing them. This allows frontends to just use
private and not worry about which sections they go to or how the linker handles
them.
One small issue with this strategy is that now a symbol name depends on the
section, which is not available before codegen. This is not a problem in
practice. The reason is that it only happens with private linkage, which will
be ignored by the non codegen users (llvm-nm and llvm-ar).
llvm-svn: 201608
ldrd r6, r7 [r2, #15]
simply gives an error and does not triggers an assertion.
As Jim points out, the diagnostic is really strange here,
but fixing that would be more complicated. The missing
comma results in the parser expecting a construct like r2[2],
which is the vector index thing the error message is talking
about. That's not what the user intended, though, and there's
nothing else in the instruction that looks at all like a vector.
Yet more fallout from not having a real parser here and trying
to do context-free generic matching for addressing modes.
rdar://15097243
llvm-svn: 201531
NaCl's ARM ABI uses 16 byte stack alignment, so set that in
ARMSubtarget.cpp.
Using 16 byte alignment exposes an issue in code generation in which a
varargs function leaves a 4 byte gap between the values of r1-r3 saved
to the stack and the following arguments that were passed on the
stack. (Previously, this code only needed to support 4 byte and 8
byte alignment.)
With this issue, llc generated:
varargs_func:
sub sp, sp, #16
push {lr}
sub sp, sp, #12
add r0, sp, #16 // Should be 20
stm r0, {r1, r2, r3}
ldr r0, .LCPI0_0 // Address of va_list
add r1, sp, #16
str r1, [r0]
bl external_func
Fix the bug by checking for "Align > 4". Also simplify the code by
using OffsetToAlignment(), and update comments.
Differential Revision: http://llvm-reviews.chandlerc.com/D2677
llvm-svn: 201497
This adds a partial implementation of the .arch_extension directive to the
integrated ARM assembler. There are a number of limitations to this
implementation arising from the target backend support rather than the
implementation itself. Namely, iWMMXT (v1 and v2), Maverick, and XScale support
is not present in the ARM backend. Currently, there is no check for A-class
only (needed for virt), and no ARMv6k detection (needed for os and sec). The
remainder of the extensions are fully supported.
llvm-svn: 201471
Summary:
AsmPrinter::EmitInlineAsm() will no longer use the EmitRawText() call for
targets with mature MC support. Such targets will always parse the inline
assembly (even when emitting assembly). Targets without mature MC support
continue to use EmitRawText() for assembly output.
The hasRawTextSupport() check in AsmPrinter::EmitInlineAsm() has been replaced
with MCAsmInfo::UseIntegratedAs which when true, causes the integrated assembler
to parse inline assembly (even when emitting assembly output). UseIntegratedAs
is set to true for targets that consider any failure to parse valid assembly
to be a bug. Target specific subclasses generally enable the integrated
assembler in their constructor. The default value can be overridden with
-no-integrated-as.
All tests that rely on inline assembly supporting invalid assembly (for example,
those that use mnemonics such as 'foo' or 'hello world') have been updated to
disable the integrated assembler.
Changes since review (and last commit attempt):
- Fixed test failures that were missed due to configuration of local build.
(fixes crash.ll and a couple others).
- Fixed tests that happened to pass because the local build was on X86
(should fix 2007-12-17-InvokeAsm.ll)
- mature-mc-support.ll's should no longer require all targets to be compiled.
(should fix ARM and PPC buildbots)
- Object output (-filetype=obj and similar) now forces the integrated assembler
to be enabled regardless of default setting or -no-integrated-as.
(should fix SystemZ buildbots)
Reviewers: rafael
Reviewed By: rafael
CC: llvm-commits
Differential Revision: http://llvm-reviews.chandlerc.com/D2686
llvm-svn: 201333
Summary:
AsmPrinter::EmitInlineAsm() will no longer use the EmitRawText() call for targets with mature MC support. Such targets will always parse the inline assembly (even when emitting assembly). Targets without mature MC support continue to use EmitRawText() for assembly output.
The hasRawTextSupport() check in AsmPrinter::EmitInlineAsm() has been replaced with MCAsmInfo::UseIntegratedAs which when true, causes the integrated assembler to parse inline assembly (even when emitting assembly output). UseIntegratedAs is set to true for targets that consider any failure to parse valid assembly to be a bug. Target specific subclasses generally enable the integrated assembler in their constructor. The default value can be overridden with -no-integrated-as.
All tests that rely on inline assembly supporting invalid assembly (for example, those that use mnemonics such as 'foo' or 'hello world') have been updated to disable the integrated assembler.
Reviewers: rafael
Reviewed By: rafael
CC: llvm-commits
Differential Revision: http://llvm-reviews.chandlerc.com/D2686
llvm-svn: 201237
* CPRCs may be allocated to co-processor registers or the stack – they may never be allocated to core registers
* When a CPRC is allocated to the stack, all other VFP registers should be marked as unavailable
The difference is only noticeable in rare cases where there are a large number of floating point arguments (e.g.
7 doubles + additional float, double arguments). Although it's probably still better to avoid vmov as it can cause
stalls in some older ARM cores. The other, more subtle benefit, is to minimize difference between the various
calling conventions.
rdar://16039676
llvm-svn: 201193
Similarly to the vshrn instructions, these are simple zext/sext + trunc
operations. Using normal LLVM IR should allow for better code, and more sharing
with the AArch64 backend.
llvm-svn: 201093
For A- and R-class processors, r12 is not normally callee-saved, but is for
interrupt handlers. See AAPCS, 5.3.1.1, "Use of IP by the linker".
llvm-svn: 201089
vshrn is just the combination of a right shift and a truncate (and the limits
on the immediate value actually mean the signedness of the shift doesn't
matter). Using that representation allows us to get rid of an ARM-specific
intrinsic, share more code with AArch64 and hopefully get better code out of
the mid-end optimisers.
llvm-svn: 201085
These methods normally call each other and it is really annoying if the
arguments are in different order. The more common rule was that the arguments
specific to call are first (GV, Encoding, Suffix) and the auxiliary objects
(Mang, TM) come after. This patch changes the exceptions.
llvm-svn: 201044
According to the AAPCS, when a CPRC is allocated to the stack, all other
VFP registers should be marked as unavailable.
I have also modified the rules for allocating non-CPRCs to the stack, to make
it more explicit that all GPRs must be made unavailable. I cannot think of a
case where the old version would produce incorrect answers, so there is no test
for this.
llvm-svn: 200970
In a previous commit (r199818) we added a const_cast to an existing
subtarget info instead of creating a new one so that we could reuse
it when creating the TargetAsmParser for parsing inline assembly.
This cast was necessary because we needed to reuse the existing STI
to avoid generating incorrect code when the inline asm contained
mode-switching directives (e.g. .code 16).
The root cause of the failure was that there was an implicit sharing
of the STI between the parser and the MCCodeEmitter. To fix a
different but related issue, we now explicitly pass the STI to the
MCCodeEmitter (see commits r200345-r200351).
The const_cast is no longer necessary and we can now create a fresh
STI for the inline asm parser to use.
Differential Revision: http://llvm-reviews.chandlerc.com/D2709
llvm-svn: 200929
In Thumb1 mode, bl instruction might be selected for branches between
basic blocks in the function if the offset is greater than 2KB.
However, this might cause SEGV because the destination symbol
is not marked as thumb function and the execution mode will be reset
to ARM mode.
Since we are sure that these symbols are in the same data fragment, we
can simply resolve these local symbols, and don't emit any relocation
information for this bl instruction.
llvm-svn: 200842
This patch fixes the ldr-pseudo implementation to work when used in
inline assembly. The fix is to move arm assembler constant pools
from the ARMAsmParser class to the ARMTargetStreamer class.
Previously we kept the assembler generated constant pools in the
ARMAsmParser object. This does not work for inline assembly because
a new parser object is created for each blob of inline assembly.
This patch moves the constant pools to the ARMTargetStreamer class
so that the constant pool will remain alive for the entire code
generation process.
An ARMTargetStreamer class is now required for the arm backend.
There was no existing implementation for MachO, only Asm and ELF.
Instead of creating an empty MachO subclass, we decided to make the
ARMTargetStreamer a non-abstract class and provide default
(llvm_unreachable) implementations for the non constant-pool related
methods.
Differential Revision: http://llvm-reviews.chandlerc.com/D2638
llvm-svn: 200777
There was an extremely confusing proliferation of LLVM intrinsics to implement
the vacge & vacgt instructions. This combines them all into two polymorphic
intrinsics, shared across both backends.
llvm-svn: 200768
Some of the SHA instructions take a scalar i32 as one argument (largely because
they work on 160-bit hash fragments). This wasn't reflected in the IR
previously, with ARM and AArch64 choosing different types (<4 x i32> and <1 x
i32> respectively) which was ugly.
This makes all the affected intrinsics take a uniform "i32", allowing them to
become non-polymorphic at the same time.
llvm-svn: 200706
The .object_arch directive indicates an alternative architecture to be specified
in the object file. The directive does *not* effect the enabled feature bits
for the object file generation. This is particularly useful when the code
performs runtime detection and would like to indicate a lower architecture as
the requirements than the actual instructions used.
llvm-svn: 200451
.movsp is an ARM unwinding directive that indicates to the unwinder that a
register contains an offset from the current stack pointer. If the offset is
unspecified, it defaults to zero.
llvm-svn: 200449
This enhances the ARMAsmParser to handle .tlsdescseq directives. This is a
slightly special relocation. We must be able to generate them, but not consume
them in assembly. The relocation is meant to assist the linker in generating a
TLS descriptor sequence. The ELF target streamer is enhanced to append
additional fixups into the current segment and that is used to emit the new
R_ARM_TLS_DESCSEQ relocations.
llvm-svn: 200448
Add support for tlsdesc relocations which are part of the ABI, marked as
experimental. These relocations permit the linker to perform TLS reference
optimizations.
llvm-svn: 200447
This adds support for TLS CALL relocations. TLS CALL relocations are used to
indicate to the linker to generate appropriate entries to resolve TLS references
via an appropriate function invocation (e.g. __tls_get_addr(PLT)).
In order to accomodate the linker relaxation of the TLS access model for the
references (GD/LD -> IE, IE -> LE), the relocation addend must be incomplete.
This requires that the partial inplace value is also incomplete (i.e. 0). We
simply avoid the offset value calculation at the time of the fixup adjustment in
the ARM assembler backend.
llvm-svn: 200446
After all hard work to implement the EHABI and with the test-suite
passing, it's time to turn it on by default and allow users to
disable it as a work-around while we fix the eventual bugs that show
up.
This commit also remove the -arm-enable-ehabi-descriptors, since we
want the tables to be printed every time the EHABI is turned on
for non-Darwin ARM targets.
Although MCJIT EHABI is not working yet (needs linking with the right
libraries), this commit also fixes some relocations on MCJIT regarding
the EH tables/lib calls, and update some tests to avoid using EH tables
when none are needed.
The EH tests in the test-suite that were previously disabled on ARM
now pass with these changes, so a follow-up commit on the test-suite
will re-enable them.
llvm-svn: 200388
The subtarget info is explicitly passed to the EncodeInstruction
method and we should use that subtarget info to influence any
encoding decisions.
llvm-svn: 200350
Before this patch we used getIntImmCost from TargetTransformInfo to determine if
a load of a constant should be converted to just a constant, but the threshold
for this was set to an arbitrary value. This value works well for the two
targets (X86 and ARM) that implement this target-hook, but it isn't
target-independent at all.
Now targets have the possibility to decide directly if this optimization should
be performed. The default value is set to false to preserve the current
behavior. The target hook has been moved to TargetLowering, which removed the
last use and need of TargetTransformInfo in SelectionDAG.
llvm-svn: 200271
This brings MC into line with GNU 'as' on ARM, and it brings the ARM
target into line with most other LLVM targets, which declare the
initial CFI state with addInitialFrameState().
Without this, functions generated with .cfi_startproc/endproc on ARM
will tend to cause GDB to abort with:
gdb/dwarf2-frame.c:1132: internal-error: Unknown CFA rule.
I've also tested this by comparing the output of "readelf -w" on the
object files produced by llvm-mc and gas when given the .s file added
here.
This change is part of addressing PR18636.
Differential Revision: http://llvm-reviews.chandlerc.com/D2597
llvm-svn: 200255
Summary:
This commit gives an address mode to the PLD instruction. We
were getting an assertion failure in the frame lowering code
because we had code that was doing a pld of a stack allocated
address. The frame lowering was checking the address mode and
then asserting because pld had none defined.
This commit fixes pld for arm mode. There was a previous fix for
thumb mode in a separate commit. The commit for thumb mode
added a test in a separate file because it would otherwise fail
for arm. This commit moves the thumb test back into the prefetch.ll
file and adds the corresponding arm test.
Differential Revision: http://llvm-reviews.chandlerc.com/D2622
llvm-svn: 200248
If a complex expression was passed to the .word directive and the first part of
the directive failed to parse, a secondary diagnostic would be produced that
would clutter the error diagnostics. Improve the diagnostics by consuming the
remainder of the statement.
llvm-svn: 200160
This has a few advantages:
* Only targets that use a MCTargetStreamer have to worry about it.
* There is never a MCTargetStreamer without a MCStreamer, so we can use a
reference.
* A MCTargetStreamer can talk to the MCStreamer in its constructor.
llvm-svn: 200129
There is no inline asm in a .s file. Therefore, there should be no logic to
handle it in the streamer. Inline asm only exists in bitcode files, so the
logic can live in the (long misnamed) AsmPrinter class.
llvm-svn: 200011
Originally, BLX was passed as operand #0 in MachineInstr and as operand
#2 in MCInst. But now, it's operand #2 in both cases.
This patch also removes unnecessary FileCheck in the test case added by r199127.
llvm-svn: 199928
With constant-sharing, litpool loads consume 4 + N*2 bytes of code, but
movw/movt pairs consume 8*N. This means litpools are better than movw/movt even
with just one use. Other materialisation strategies can still be better though,
so the logic is a little odd.
llvm-svn: 199891
This patch restores the ARM mode if the user's inline assembly
does not. In the object streamer, it ensures that instructions
following the inline assembly are encoded correctly and that
correct mapping symbols are emitted. For the asm streamer, it
emits a .arm or .thumb directive.
This patch does not ensure that the inline assembly contains
the ADR instruction to switch modes at runtime.
The problem we need to solve is code like this:
int foo(int a, int b) {
int r = a + b;
asm volatile(
".align 2 \n"
".arm \n"
"add r0,r0,r0 \n"
: : "r"(r));
return r+1;
}
If we compile this function in thumb mode then the inline assembly
will switch to arm mode. We need to make sure that we switch back to
thumb mode after emitting the inline assembly or we will incorrectly
encode the instructions that follow (i.e. the assembly instructions
for return r+1).
Based on patch by David Peixotto
Change-Id: Ib57f6d2d78a22afad5de8693fba6230ff56ba48b
llvm-svn: 199818
This implements the unwind_raw directive for the ARM IAS. The unwind_raw
directive takes the form of a stack offset value followed by one or more bytes
representing the opcodes to be emitted. The opcode emitted will interpreted as
if it were assembled by the opcode assembler via the standard unwinding
directives.
Thanks to Logan Chien for an extra test!
llvm-svn: 199707
The .personalityindex directive is equivalent to the .personality directive with
the ARM EABI personality with the specific index (0, 1, 2). Both of these
directives indicate personality routines, so enhance the personality directive
handling to take into account personalityindex.
Bonus fix: flush the UnwindContext at the beginning of a new function.
Thanks to Logan Chien for additional tests!
llvm-svn: 199706
optional DWARF sections, so compiling with -g does not result in
different code being generated for PC-relative loads.
This is reapplying a diet r197922 (__TEXT-only).
llvm-svn: 199681
Ensure that the tag types are reflected on a replacement. This is particularly
important for the compatibility tag which has multiple representations where the
last definition wins.
llvm-svn: 199577
This moves the ARM build attributes definitions and support routines into the
Support library. The support routines simply permit the conversion of the value
to and from a string representation.
The movement is prompted in order to permit access to the constants and string
representations from readobj in order to facilitate decoding of the attributes
section.
llvm-svn: 199575
Fix MLA defs to use register class GPRnopc.
Add encoding tests for multiply instructions.
(Alias for MUL/SMLAL/UMLAL added by r199026.)
Patch by Zhaoshi.
llvm-svn: 199491
When expanding neon pseudo stores, it may miss the implicit uses of sub
regs, which may cause post RA scheduler reorder instructions that
breakes anti dependency.
For example:
VST1d64QPseudo %R0<kill>, 16, %Q9_Q10, pred:14, pred:%noreg
will be expanded to
VST1d64Q %R0<kill>, 16, %D18, pred:14, pred:%noreg;
An instruction that defines %D20 may be scheduled before the store by
mistake.
This patches adds implicit uses for such case. For the example above, it
emits:
VST1d64Q %R0<kill>, 8, %D18, pred:14, pred:%noreg, %Q9_Q10<imp-use>
llvm-svn: 199282
The changes caused by folding an sp-adjustment into a "pop" previously
disrupted the forward search for the final real instruction in a
terminating block. This switches to a backward search (skipping debug
instrs).
This fixes PR18399.
Patch by Zhaoshi.
llvm-svn: 199266
The already allocatable DPair superclass contains odd-even D register
pair in addition to the even-odd pairs in the QPR register class. There
is no reason to constrain the set of D register pairs that can be used
for NEON values. Any NEON instructions that require a Q register will
automatically constrain the register class to QPR.
The allocation order for DPair begins with the QPR registers, so
register allocation is unlikely to change much.
llvm-svn: 199186
This will allow it to be called from target independent parts of the main
streamer that don't know if there is a registered target streamer or not. This
in turn will allow targets to perform extra actions at specified points in the
interface: add extra flags for some labels, extra work during finalization, etc.
llvm-svn: 199174
The issue is caused when Post-RA scheduler reorders a bundle instruction
(IT block). However, it only flips the CPSR liveness of the bundle instruction,
leaves the instructions inside the bundle unchanged, which causes inconstancy and crashes
Thumb2SizeReduction.cpp::ReduceMBB().
llvm-svn: 199127
Previously we only used GPR for the destination placeholder in "ldr rD, [pc,
incorrect codegen under the integrated assembler.
This should fix both issues (which probably only affect MachO targets at the
moment).
rdar://problem/15800156
llvm-svn: 199108
The target specific parser should return `false' if the target AsmParser handles
the directive, and `true' if the generic parser should handle the directive.
Many of the target specific directive handlers would `return Error' which does
not follow these semantics. This change simply changes the target specific
routines to conform to the semantis of the ParseDirective correctly.
Conformance to the semantics improves diagnostics emitted for the invalid
directives. X86 is taken as a sample to ensure that multiple diagnostics are
not presented for a single error.
llvm-svn: 199068
An improper qualifier would result in a superfluous error due to the parser not
consuming the remainder of the statement. Simply consume the remainder of the
statement to avoid the error.
llvm-svn: 199035
The implicit immediate 0 forms are assembly aliases, not distinct instruction
encodings. Fix the initial implementation introduced in r198914 to an alias to
avoid two separate instruction definitions for the same encoding.
An InstAlias is insufficient in this case as the necessary due to the need to
add a new additional operand for the implicit zero. By using the AsmPsuedoInst,
fall back to the C++ code to transform the instruction to the equivalent
_POST_IMM form, inserting the additional implicit immediate 0.
llvm-svn: 199032
A 32-bit immediate value can be formed from a constant expression and loaded
into a register. Add support to emit this into an object file. Because this
value is a constant, a relocation must *not* be produced for it.
llvm-svn: 199023
The disassembler would no longer be able to disambiguage between the two
variants (explicit immediate #0 vs implicit, omitted #0) for the ldrt, strt,
ldrbt, strbt mnemonics as both versions indicated the disassembler routine.
llvm-svn: 198944
The GNU assembler supports prefixing the expression with a '#' to indiciate that
the value that is being moved is infact a constant. This improves the
compatibility of the integrated assembler's parser for this.
llvm-svn: 198916
The GNU assembler has an extension that allows for the elision of the paired
register (dt2) for the LDRD and STRD mnemonics. Add support for this in the
assembly parser. Canonicalise the usage during the instruction parsing from
the specified version.
llvm-svn: 198915
The ARM ARM indicates the mnemonics as follows:
ldrbt{<c>}{<q>} <Rt>, [<Rn>], {, #+/-<imm>}
ldrt{<c>}{<q>} <Rt>, [<Rn>] {, #+/-<imm>}
strbt{<c>}{<q>} <Rt>, [<Rn>] {, #<imm>}
strt{<c>}{<q>} <Rt>, [<Rn>] {, #+/-<imm>}
This improves the parser to deal with the implicit immediate 0 for the mnemonics
as per the specification.
Thanks to Joerg Sonnenberger for the tests!
llvm-svn: 198914
operand into the Value interface just like the core print method is.
That gives a more conistent organization to the IR printing interfaces
-- they are all attached to the IR objects themselves. Also, update all
the users.
This removes the 'Writer.h' header which contained only a single function
declaration.
llvm-svn: 198836
Operands which involved label arithemetic would previously fail to parse. This
corrects that by adding the additional case for the shift operand validation.
llvm-svn: 198735
This commit adds the pre-UAL aliases of fconsts and fconstd for
vmov.f32 and vmov.f64. They use an InstAlias rather than a
MnemonicAlias to properly support the predicate operand.
We need to support encoded 8-bit constants in order to implement the
pre-UAL fconsts/fconstd aliases for vmov.f32/vmov.f64, so this
commit also fixes parsing of encoded floating point constants used
in vmov.f32/vmov.f64 instructions. Now we can support assembly code
like this:
fconsts s0, #0x70
which is equivalent to vmov.f32 s0, #1.0.
Most of the code was already in place to support this feature.
Previously the code was trying to accept encoded 8-bit float
constants for the vmov.f32/vmov.f64 instructions. It looks like the
support for parsing encoded floats was lost in a refactoring in
commit r148556 and we did not have any tests in place to catch it.
The change in this commit is to keep the parsed value as a 32-bit
float instead of a 64-bit double because that is what the isFPImm()
function expects to find. There is no loss of precision by using a
32-bit float here because we are still limited to an 8-bit encoded
value in the end.
Additionally, we explicitly reject encoded 8-bit floats for
vmovf.32/64. This is the same as the current behavior, but we now do
it explicitly rather than accidently.
llvm-svn: 198697
are part of the core IR library in order to support dumping and other
basic functionality.
Rename the 'Assembly' include directory to 'AsmParser' to match the
library name and the only functionality left their -- printing has been
in the core IR library for quite some time.
Update all of the #includes to match.
All of this started because I wanted to have the layering in good shape
before I started adding support for printing LLVM IR using the new pass
infrastructure, and commandline support for the new pass infrastructure.
llvm-svn: 198688
subsequent changes are easier to review. About to fix some layering
issues, and wanted to separate out the necessary churn.
Also comment and sink the include of "Windows.h" in three .inc files to
match the usage in Memory.inc.
llvm-svn: 198685
Move the unwinding context for the ARM IAS into a helper class. This is purely
a structural refactoring. A follow up change allows for recording additional
depth to improve diagnostics.
llvm-svn: 198664
Parse tag names as well as expressions. The former is part of the
specification, the latter is for improved compatibility with the GNU assembler.
Fix attribute value handling to be comformant to the specification.
llvm-svn: 198662
Introduce a new virtual method Note into the AsmParser. This completements the
existing Warning and Error methods. Use the new method to clean up the output
of the unwind routines in the ARM AsmParser.
llvm-svn: 198661
The ARM backend has been using most of the MachO related subtarget
checks almost interchangeably, and since the only target it's had to
run on has been IOS (which is all three of MachO, Darwin and IOS) it's
worked out OK so far.
But we'd like to support embedded targets under the "*-*-none-macho"
triple, which means everything starts falling apart and inconsistent
behaviours emerge.
This patch should pick a reasonably sensible set of behaviours for the
new triple (and any others that come along, with luck). Some choices
were debatable (notably FP == r7 or r11), but we can revisit those
later when deficiencies become apparent.
llvm-svn: 198617
Longer term, we want to move users to "*-*-*-macho" for embedded work, but for
now people are relying on the last thing we told them, which is unfortunately
"*-*-darwin-eabi".
rdar://problem/15703934
llvm-svn: 198602
This moves the check up into the parent class so that all targets can use it
without having to copy (and keep in sync) the same error message.
llvm-svn: 198579
Move the ARM EHABI unwind opcode definitions from the ARM MCTargetDesc into LLVM
Support. This enables sharing of the definitions across the ARM target code as
well as llvm-readobj. This will allow implementation of the unwind decoding in
llvm-readobj.
llvm-svn: 198576
__builtin_returnaddress requires that the value passed into is be a constant.
However, at -O0 even a constant expression may not be converted to a constant.
Emit an error message intead of crashing.
llvm-svn: 198531
Before this patch any program that wanted to know the final symbol name of a
GlobalValue had to link with Target.
This patch implements a compromise solution where the mangler uses DataLayout.
This way, any tool that already links with Target (llc, clang) gets the exact
behavior as before and new IR files can be mangled without linking with Target.
With this patch the mangler is constructed with just a DataLayout and DataLayout
is extended to include the information the Mangler needs.
llvm-svn: 198438
Checking the trailing letter of the mnemonic is insufficient. Be more thorough
in the scanning of the instruction to ensure that we correctly work with the
predicated mnemonics.
llvm-svn: 198235
The DPR and SPR register lists are also register lists. Furthermore, the
registers need not be checked individually since the register type can be
checked via the list kind. Use that to simplify the logic and fix the incorrect
assertion.
llvm-svn: 198174
Directive parsers must return false if the target assembler is interested in
handling the directive. The Error member function returns true always. Using
the 'return Error()' pattern would incorrectly indicate to the general parser
that the target was not interested in the directive, when in reality it simply
encountered a badly formed directive or some other error. This corrects the
behaviour to ensure that the parser behaves appropriately.
llvm-svn: 198132
Schedule more conservatively to account for stalls on floating point
resources and latency. Use the AGU resource to model latency stalls
since it's shared between FP and LD/ST instructions. This might not be
completely accurate but should work well in practice.
llvm-svn: 198125
Many vector operations never had itineraries. Since the new machine
model was a mapping from existing itinerary classes, we don't have a
model for these. We still want to migrate A9 even though no one has
invested in a complete model, so mark it incomplete to avoid the
scheduler asserting.
llvm-svn: 198123
The bkpt mnemonic has an implicit immediate constant of 0 unless otherwise
specified. Add an instruction alias for the unvalued breakpoint mnemonic to
treat it as a 0. This improves compatibility with GNU AS.
Signed-off-by: Saleem Abdulrasool <compnerd@compnerd.org>
llvm-svn: 197913
We dump any non-empty assembler constant pools after a successful
parse of an assembly file that uses the ldr pseudo opcode. These
per-section constant pools should be output in a deterministic order
to ensure that we always generate the same output when printing the
output with an AsmStreamer.
This patch changes the map data struture used to associate a section
with its constant pool to a MapVector to ensure deterministic
output. Because this map type does not support deletion, we now
check that the constant pool is not empty before dumping its entries
and clear the entries after emitting them with the streamer.
llvm-svn: 197735
This directive will write out the assembler-maintained constant
pool for the current section. These constant pools are created to
support the ldr-pseudo instruction (e.g. ldr r0, =val).
The directive can be used by the programmer to place the constant
pool in a location that can be reached by a pc-relative offset in
the ldr instruction.
llvm-svn: 197711
The ldr-pseudo opcode is a convenience for loading 32-bit constants.
It is converted into a pc-relative load from a constant pool. For
example,
ldr r0, =0x10001
ldr r1, =bar
will generate this output in the final assembly
ldr r0, .Ltmp0
ldr r1, .Ltmp1
...
.Ltmp0: .long 0x10001
.Ltmp1: .long bar
Sketch of the LDR pseudo implementation:
Keep a map from Section => ConstantPool
When parsing ldr r0, =val
parse val as an MCExpr
get ConstantPool for current Section
Label = CreateTempSymbol()
remember val in ConstantPool at next free slot
add operand to ldr that is MCSymbolRef of Label
On finishParse() callback
Write out all non-empty constant pools
for each Entry in ConstantPool
Emit Entry.Label
Emit Entry.Value
Possible improvements to be added in a later patch:
1. Does not convert load of small constants to mov
(e.g. ldr r0, =0x1 => mov r0, 0x1)
2. Does reuse constant pool entries for same constant
The implementation was tested for ARM, Thumb1, and Thumb2 targets on
linux and darwin.
llvm-svn: 197708
This adds support for the .inst directive. This is an ARM specific directive to
indicate an instruction encoded as a constant expression. The major difference
between .word, .short, or .byte and .inst is that the latter will be
disassembled as an instruction since it does not get flagged as data.
llvm-svn: 197657
Given vsel_cc, op1, op2, since vsel has no LE/LT, to generate vsel for
such selection, it needs to inverse cc and swap op1 and op2. To inverse
cc, both L/G and E bits should be flipped.
llvm-svn: 197615
According to "Addenda to ABI for ARM architecture", Tag_FP_arch is the
new name for the equivalent Tag_VFP_arch. This commit renames
Tag_VFP_arch to Tag_FP_arch.
llvm-svn: 197587
Clang sets the float-abi target option manually, but no longer
annotates each function with its ABI. This can lead to confusing
mistmatch between "clang -emit-llvm | llc" and normal clang
invocations.
Besides which, gnueabihf actually *is* hard-float. Defaulting to soft
was just perverse.
llvm-svn: 197554
were falling into the cases for 24-bit branch kinds which are not 24-bit
branches. The routine is to return false for fixups are expected to always
be resolvable at assembly time. Which these three fixups are as they have
limited displacement and are for local references within a function.
rdar://15586725
llvm-svn: 197282
The tests were no longer using fast-isel at all (MachO needs an "ios" rather
than "darwin" triple at the moment and Linux needs ARM mode). Once that was
corrected, the verifier complained about a t2ADDri created for the alloca.
llvm-svn: 197046
Most users would be surprised if "isCOFF" and "isMachO" were simultaneously
true, unless they'd put the compiler in a box with a gun attached to a photon
detector.
This makes sure precisely one of the three formats is true for any triple and
simplifies some target logic based on that.
llvm-svn: 196934
When trying to eliminate an "sub sp, sp, #N" instruction by folding
it into an existing push/pop using dummy registers, we need to account
for the fact that this might affect precisely how "fp" gets set in the
prologue.
We were attempting this, but assuming that *whenever* we performed a
fold it would make a difference. This is false, for example, in:
push {r4, r7, lr}
add fp, sp, #4
vpush {d8}
sub sp, sp, #8
we can fold the "sub" into the "vpush", forming "vpush {d7, d8}".
However, in that case the "add fp" instruction mustn't change, which
we were getting wrong before.
Should fix PR18160.
llvm-svn: 196725
- krait processor currently modeled with the same features as A9.
- Krait processor additionally has VFP4 (fused multiply add/sub)
and hardware division features enabled.
- krait has currently the same Schedule model as A9
- krait cpu flag is not recognized by the GNU assembler yet,
it is replaced with march=armv7-a to avoid a lower march
from being used.
llvm-svn: 196619
The current peephole optimizing for compare inst assumes an instr that
uses CPSR has an MO for ARM Cond code.However, for VSEL instructions
(vseqeq, vselgt, vselgt, vselvs), there is no such operand nor do
they support the modification of Cond Code.
llvm-svn: 196588
We were trying to fold the stack adjustment into the wrong instruction in the
situation where the entire basic-block was epilogue code. Really, it can only
ever be valid to do the folding precisely where the "add sp, ..." would be
placed so there's no need for a separate iterator to track that.
Should fix PR18136.
llvm-svn: 196493
ARM symbol variants are written with parens instead of @ like this:
.word __GLOBAL_I_a(target1)
This commit adds support for parsing these symbol variants in
expressions. We introduce a new flag to MCAsmInfo that indicates the
parser should use parens to parse the symbol variant. The expression
parser is modified to look for symbol variants using parens instead
of @ when the corresponding MCAsmInfo flag is true.
The MCAsmInfo parens flag is enabled only for ARM on ELF.
By adding this flag to MCAsmInfo, we are able to get rid of
redundant ARM-specific symbol variants and use the generic variants
instead (e.g. VK_GOT instead of VK_ARM_GOT). We use the new
UseParensForSymbolVariant attribute in MCAsmInfo to correctly print
the symbol variants for arm.
To achive this we need to keep a handle to the MCAsmInfo in the
MCSymbolRefExpr class that we can check when printing the symbol
variant.
Updated Tests:
Changed case of symbol variant to match the generic kind.
test/CodeGen/ARM/tls-models.ll
test/CodeGen/ARM/tls1.ll
test/CodeGen/ARM/tls2.ll
test/CodeGen/Thumb2/tls1.ll
test/CodeGen/Thumb2/tls2.ll
PR18080
llvm-svn: 196424
MO_JumpTableIndex and MO_ExternalSymbol don't show up on inline asm.
Keeping parts of the old asm printer just to print inline asm to a string that
we then parse back looks like a hack.
llvm-svn: 196111
These are used by MachO only at the moment, and (much like the existing
MOVW/MOVT set) work around the fact that the labels used in the actual
instructions often contain PC-dependent components, which means that repeatedly
materialising the same global can't be CSEed.
With small modifications, it could be adapted to how ELF finds the address of
_GLOBAL_OFFSET_TABLE_, which would give similar benefits in PIC mode there.
llvm-svn: 196090
Previously, we clobbered callee-saved registers when folding an "add
sp, #N" into a "pop {rD, ...}" instruction. This change checks whether
a register we're going to add to the "pop" could actually be live
outside the function before doing so and should fix the issue.
This should fix PR18081.
llvm-svn: 196046
I think, in principle, intrinsics_gen may be added explicitly.
That said, it can be added incidentally, since each target already has dependencies to llvm-tblgen.
Almost all source files depend on both CommonTaleGen and intrinsics_gen.
Explicit add_dependencies() have been pruned under lib/Target.
llvm-svn: 195929
Alp Toker