This changes the way that asrl and lsrl intrinsics are lowered, going
via a the ISEL ASRL and LSLL nodes instead of straight to machine nodes.
On top of that, it adds some constant folds for long shifts, in case it
turns out that the shift amount was either constant or 0.
Differential Revision: https://reviews.llvm.org/D75553
Summary:
This is a simple patch that expands https://reviews.llvm.org/D75859 to pointer comparison and fcmp
Checked with Alive2
Reviewers: reames, jdoerfert
Reviewed By: jdoerfert
Subscribers: hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D76048
We can form vpbroadcastw with a folded load.
We had patterns for i16->i32 zextload/extload, but nothing prevents
i64 from occuring.
I'd like to move this all to DAG combine to fix more cases, but
this is trivial fix to minimize test diffs when moving to a combine.
These are based on existing test cases but use i64 instead of i32.
Some of these end up with i64 zextload/extloads from i16 that we
don't have isel patterns for.
Some of the other cases fail because isTypeDesirableForOp prevents
shrinking the (trunc (i64 (srl (load)))) directly. So we try
to shrink based on the (i64 (srl (load))) but we need 64 - shift_amount
to be a power of 2 to do that shrink.
LLVM currently supports CSK_MD5 and CSK_SHA1 source file checksums in
debug info. This change adds support for CSK_SHA256 checksums.
The SHA256 checksums are supported by the CodeView debug format.
Reviewed By: aprantl
Differential Revision: https://reviews.llvm.org/D75785
Summary:
Do not iterate on scalable vector. Also do not return constant scalable vector
from ConstantInt::get().
Fix result type by using getElementCount() instead of getNumElements().
Reviewers: sdesmalen, efriedma, apazos, huntergr, willlovett
Reviewed By: efriedma
Subscribers: tschuett, hiraditya, rkruppe, psnobl, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D73753
Currently we infer whether the flat-scratch-init kernel input should
be enabled based on calls. Move this handling, so we can decide if the
full set of ABI inputs is needed in kernels. Ideally we would have an
analysis of some sort, rather than the function attributes.
This patch enables exception handling in code added to LLJIT on Darwin by
adding an orc::EHFrameRegistrationPlugin instance to the ObjectLinkingLayer
(which is currently used on Darwin only).
The patch removes late endcf handling and only leaves the
related portion with redundant exec mask copy elimination.
Differential Revision: https://reviews.llvm.org/D76095
Summary:
Support ConstantInt::get() and Constant::getAllOnesValue() for scalable
vector type, this requires ConstantVector::getSplat() to take in 'ElementCount',
instead of 'unsigned' number of element count.
This change is needed for D73753.
Reviewers: sdesmalen, efriedma, apazos, spatel, huntergr, willlovett
Reviewed By: efriedma
Subscribers: tschuett, hiraditya, rkruppe, psnobl, cfe-commits, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D74386
This patch allows ISD::FSHR(i32) patterns to lower to ALIGNBIT instructions.
This improves test coverage of ISD::FSHR matching - x86 has both FSHL/FSHR instructions and we prefer FSHL by default.
Differential Revision: https://reviews.llvm.org/D76070
Summary:
Using the default DAG.UnrollVectorOp on v16i8 and v8i16 vectors
results in i8 or i16 nodes being inserted into the SelectionDAG. Since
those are illegal types, this causes a legalization assertion failure
for some code patterns, as uncovered by PR45178. This change unrolls
shifts manually to avoid this issue by adding and using a new optional
EVT argument to DAG.ExtractVectorElements to control the type of the
extract_element nodes.
Reviewers: aheejin, dschuff
Subscribers: sbc100, jgravelle-google, hiraditya, sunfish, zzheng, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D76043
This is to replace the optimization from the SIOptimizeExecMaskingPreRA.
We have less opportunities in the control flow lowering because many
VGPR copies are still in place and will be removed later, but we know
for sure an instruction is SI_END_CF and not just an arbitrary S_OR_B64
with EXEC.
The subsequent change needs to convert s_and_saveexec into s_and and
address new TODO lines in tests, then code block guarded by the
-amdgpu-remove-redundant-endcf option in the pre-RA exec mask optimizer
will be removed.
Differential Revision: https://reviews.llvm.org/D76033
Summary:
On 32-bit PPC target[AIX and BE], when we convert an `i64` to `f32`, a `setcc` operand expansion is needed. The expansion will set the result type of expanded `setcc` operation based on if the subtarget use CRBits or not. If the subtarget does use the CRBits, like AIX and BE, then it will set the result type to `i1`, leading to an inconsistency with original `setcc` result type[i32].
And the reason why it crashed underneath is because we don't set result type of setcc consistent in those two places.
This patch fixes this problem by setting original setcc opnode result type also with `getSetCCResultType` interface.
Reviewers: sfertile, cebowleratibm, hubert.reinterpretcast, Xiangling_L
Reviewed By: sfertile
Subscribers: wuzish, nemanjai, hiraditya, kbarton, jsji, shchenz, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D75702
Summary:
This patch adds the following intrinsics for non-temporal gather loads
and scatter stores:
* aarch64_sve_ldnt1_gather_index
* aarch64_sve_stnt1_scatter_index
These intrinsics implement the "scalar + vector of indices" addressing
mode.
As opposed to regular and first-faulting gathers/scatters, there's no
instruction that would take indices and then scale them. Instead, the
indices for non-temporal gathers/scatters are scaled before the
intrinsics are lowered to `ldnt1` instructions.
The new ISD nodes, GLDNT1_INDEX and SSTNT1_INDEX, are only used as
placeholders so that we can easily identify the cases implemented in
this patch in performGatherLoadCombine and performScatterStoreCombined.
Once encountered, they are replaced with:
* GLDNT1_INDEX -> SPLAT_VECTOR + SHL + GLDNT1
* SSTNT1_INDEX -> SPLAT_VECTOR + SHL + SSTNT1
The patterns for lowering ISD::SHL for scalable vectors (required by
this patch) were missing, so these are added too.
Reviewed By: sdesmalen
Differential Revision: https://reviews.llvm.org/D75601
This is part of the IR sibling for:
D75576
(I'm splitting part of the transform as a separate commit
to reduce risk. I don't know of any bugs that might be
exposed by this improved folding, but it's hard to see
those in advance...)
This patch switches SCCP to use ValueLatticeElement for lattice values,
instead of the local LatticeVal, as first step to enable integer range support.
This patch does not make use of constant ranges for additional operations
and the only difference for now is that integer constants are represented by
single element ranges. To preserve the existing behavior, the following helpers
are used
* isConstant(LV): returns true when LV is either a constant or a constant range with a single element. This should return true in the same cases where LV.isConstant() returned true previously.
* getConstant(LV): returns a constant if LV is either a constant or a constant range with a single element. This should return a constant in the same cases as LV.getConstant() previously.
* getConstantInt(LV): same as getConstant, but additionally casted to ConstantInt.
Reviewers: davide, efriedma, mssimpso
Reviewed By: efriedma
Differential Revision: https://reviews.llvm.org/D60582
Summary:
This adds the ACLE intrinsic family for the VFMA and VFMS
instructions, which perform fused multiply-add on vectors of floats.
I've represented the unpredicated versions in IR using the cross-
platform `@llvm.fma` IR intrinsic. We already had isel rules to
convert one of those into a vector VFMA in the simplest possible way;
but we didn't have rules to detect a negated argument and turn it into
VFMS, or rules to detect a splat argument and turn it into one of the
two vector/scalar forms of the instruction. Now we have all of those.
The predicated form uses a target-specific intrinsic as usual, but
I've stuck to just one, for a predicated FMA. The subtraction and
splat versions are code-generated by passing an fneg or a splat as one
of its operands, the same way as the unpredicated version.
In arm_mve_defs.h, I've had to introduce a tiny extra piece of
infrastructure: a record `id` for use in codegen dags which implements
the identity function. (Just because you can't declare a Tablegen
value of type dag which is //only// a `$varname`: you have to wrap it
in something. Now I can write `(id $varname)` to get the same effect.)
Reviewers: dmgreen, MarkMurrayARM, miyuki, ostannard
Reviewed By: dmgreen
Subscribers: kristof.beyls, hiraditya, danielkiss, cfe-commits, llvm-commits
Tags: #clang, #llvm
Differential Revision: https://reviews.llvm.org/D75998
Summary:
This patch replaces incorrectt assert with a check. Previously it asserts that
if SCEV cannot prove `isKnownPredicate(A != B)`, then it should be able to prove
`isKnownPredicate(A == B)`.
Both these fact may be not provable. It is shown in the provided test:
Could not prove: `{-294,+,-2}<%bb1> != 0`
Asserting: `{-294,+,-2}<%bb1> == 0`
Obviously, this SCEV is not equal to zero, but 0 is in its range so we cannot
also prove that it is not zero.
Instead of assert, we should be checking the required conditions explicitly.
Reviewers: lebedev.ri, fhahn, sanjoy, fedor.sergeev
Reviewed By: lebedev.ri
Subscribers: hiraditya, zzheng, javed.absar, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D76050
Summary:
Currently, a BoundaryAlign fragment may be inserted after the branch
that needs to be aligned to truncate the current fragment, this fragment is
unused at most of time. To avoid that, we can insert a new empty Data
fragment instead. Non-relaxable instruction is usually emitted into Data
fragment, so the inserted empty Data fragment will be reused at a high
possibility.
Reviewers: annita.zhang, reames, MaskRay, craig.topper, LuoYuanke, jyknight
Reviewed By: reames, LuoYuanke
Subscribers: llvm-commits, dexonsmith, hiraditya
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D75438
This patch is intend to implement the missing P8 MacroFusion for LLVM
according to Power8 User's Manual Section 10.1.12 Instruction Fusion
Differential Revision: https://reviews.llvm.org/D70651
This is a reimplementation of the optimization removed in D75964. The actual spill/fill optimization is handled by D76013, this one just worries about reducing the stackmap section size itself by eliminating redundant entries. As noted in the comments, we could go a lot further here, but avoiding the degenerate invoke case as we did before is probably "enough" in practice.
Differential Revision: https://reviews.llvm.org/D76021
Summary:
callbr's indirect branches aren't expected to be taken, so reduce their
probabilities to 0 while increasing the default destination to 1. This
allows some code improvements through block placement.
Reviewers: nickdesaulniers
Subscribers: hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D72656
In order for dsymutil to collect .apinotes files (which capture
attributes such as nullability, Swift import names, and availability),
I want to propose adding an apinotes: field to DIModule that gets
translated into a DW_AT_LLVM_apinotes (path) nested inside
DW_TAG_module. This will be primarily used by LLDB to indirectly
extract the Swift names of Clang declarations that were deserialized
from DWARF.
<rdar://problem/59514626>
Differential Revision: https://reviews.llvm.org/D75585
Summary: Add verification that operand bundles on an llvm.assume are well formed to the verify pass.
Reviewers: jdoerfert
Reviewed By: jdoerfert
Subscribers: hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D75269
Summary:
For scalable vector, index out-of-bound can not be determined at compile-time.
The same apply for VectorUtil findScalarElement().
Add test cases to check the functionality of SimplifyInsert/ExtractElementInst for scalable vector.
Reviewers: sdesmalen, efriedma, spatel, apazos
Reviewed By: efriedma
Subscribers: cameron.mcinally, tschuett, hiraditya, rkruppe, psnobl, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D75782
This is part of PR44213 https://bugs.llvm.org/show_bug.cgi?id=44213
When importing (system) Clang modules, LLDB needs to know which SDK
(e.g., MacOSX, iPhoneSimulator, ...) they came from. While the sysroot
attribute contains the absolute path to the SDK, this doesn't work
well when the debugger is run on a different machine than the
compiler, and the SDKs are installed in different directories. It thus
makes sense to just store the name of the SDK instead of the absolute
path, so it can be found relative to LLDB.
rdar://problem/51645582
Differential Revision: https://reviews.llvm.org/D75646
Summary:
The change is to fix conflict value for metadata "Objective-C Garbage Collection" in the mix of swift and Objective-C bitcode.
The purpose is to provide the support of LTO for swift and Objective-C mixed project.
Reviewers: rjmccall, ahatanak, steven_wu
Reviewed By: rjmccall, steven_wu
Subscribers: manmanren, mehdi_amini, hiraditya, dexonsmith, llvm-commits, jinlin
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D71219
Instead, emit a trap and a warning. We force inlining of this
situation, so any function where this happens should be dead as
indirect or external calls are not yet supported. This should avoid
erroring on dead code.
We just removed a broken duplicate elimination algorithm in D75964, and after landed that it occurred to me that duplicate elimination is simply CSE. SelectionDAG has a build in CSE, so why wasn't that triggering? Well, it turns out we were overly conservative in the memory states for our reloads and CSE (rightly) considers the incoming memory state for a load part of the identity of the load.
By loosening the chain and allowing reordering, we also allow CSE. As shown in the test case, doing iterative CSE as we go is enough to eliminate duplicate stores in later statepoints as well. We key our (block local) slot map by SDValue, so commoning a previous pair of loads at construction time means we also common following stores.
Differential Revision: https://reviews.llvm.org/D76013
This patch reuses the existing MatchRotate ROTL/ROTR rotation pattern code to also recognize the more general FSHL/FSHR funnel shift patterns when we have constant shift amounts.
Differential Revision: https://reviews.llvm.org/D75114
Summary:
The IR intrinsics are mapped to the following SVE2 instructions:
* WHILERW <Pd>.<T>, <Xn>, <Xm>
* WHILEWR <Pd>.<T>, <Xn>, <Xm>
The intrinsics introduced in this patch are the IR counterpart of the
SVE ACLE functions `svwhilerw` and `svwhilewr` (all data type
variants).
Patch by Maciej Gąbka <maciej.gabka@arm.com>.
Reviewers: kmclaughlin, rengolin
Reviewed By: kmclaughlin
Subscribers: tschuett, kristof.beyls, hiraditya, danielkiss, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D75862
The assumption is that conditional regions are perfectly nested
and a mask restored at the exit from the inner block will be
completely covered by a mask restored in the outer.
It turns out with our current structurizer this is not always
the case.
Disable the optimization for now, but I want to keep it around
for a while to either try after further structurizer changes or
to move it into control flow lowering where we have more info
and reuse the test.
Differential Revision: https://reviews.llvm.org/D75958
Summary:
This patch helps CodeGenPrepare move freeze into the icmp when it is used by branch.
It reenables generation of efficient conditional jumps.
This is only done when at least one of icmp's operands is constant to prevent the transformation from increasing # of freeze instructions.
Performance degradation of MultiSource/Benchmarks/Ptrdist/yacr2/yacr2.test is resolved with this patch.
Checked with Alive2
Reviewers: reames, fhahn, nlopes
Reviewed By: reames
Subscribers: jdoerfert, hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D75859
Summary:
There's a lot of test case churn but the overall effect is to increase
the number of back-to-back v_sub,v_subbrev pairs, which can execute with
no delay even on gfx10.
Reviewers: arsenm, rampitec, nhaehnle
Subscribers: kzhuravl, jvesely, wdng, yaxunl, dstuttard, tpr, t-tye, hiraditya, kerbowa, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D75999
This patch adds support for propagating matrix expressions along the
inlined-at chain and emitting remarks at the traversed function scopes.
To motivate this new behavior, consider the example below. Without the
remark 'up-leveling', we would only get remarks in load.h and store.h,
but we cannot generate a remark describing the full expression in
toplevel.cpp, which is the place where the user has the best chance of
spotting/fixing potential problems.
With this patch, we generate a remark for the load in load.h, one for
the store in store.h and one for the complete expression in
toplevel.cpp. For a bigger example, please see remarks-inlining.ll.
load.h:
template <typename Ty, unsigned R, unsigned C> Matrix<Ty, R, C> load(Ty *Ptr) {
Matrix<Ty, R, C> Result;
Result.value = *reinterpret_cast <typename Matrix<Ty, R, C>::matrix_t *>(Ptr);
return Result;
}
store.h:
template <typename Ty, unsigned R, unsigned C> void store(Matrix<Ty, R, C> M1, Ty *Ptr) {
*reinterpret_cast<typename decltype(M1)::matrix_t *>(Ptr) = M1.value;
}
toplevel.cpp
void test(double *A, double *B, double *C) {
store(add(load<double, 3, 5>(A), load<double, 3, 5>(B)), C);
}
For a given function, we traverse the inlined-at chain for each
matrix instruction (= instructions with shape information). We collect
the matrix instructions in each DISubprogram we visit. This produces a
mapping of DISubprogram -> (List of matrix instructions visible in the
subpogram). We then generate remarks using the list of instructions for
each subprogram in the inlined-at chain. Note that the list of instructions
for a subprogram includes the instructions from its own subprograms
recursively. For example using the example above, for the subprogram
'test' this includes inline functions 'load' and 'store'. This allows
surfacing the remarks at a level useful to users.
Please note that the current approach may create a lot of extra remarks.
Additional heuristics to cut-off the traversal can be implemented in the
future. For example, it might make sense to stop 'up-leveling' once all
matrix instructions are at the same debug location.
Reviewers: anemet, Gerolf, thegameg, hfinkel, andrew.w.kaylor, LuoYuanke
Reviewed By: anemet
Differential Revision: https://reviews.llvm.org/D73600
A downstream test case (see included reduced test) revealed that we have a bug in how we handle duplicate relocations. If we have the same SDValue relocated twice, and that value happens to be a constant (such as null), we only export one of the two llvm::Values. Exporting on a per llvm::Value basis is required to allow lowering of gc.relocates in following basic blocks (e.g. invokes). Without it, we end up with a use of an undefined vreg and bad things happen.
Rather than fixing the optimization - which appears to be hard - I propose we simply remove it. There are no tests in tree that change with this code removed. If we find out later that this did matter for something, we can reimplement a variation of this in CodeGenPrepare to catch the easy cases without complicating the lowering code.
Thanks to Denis and Serguei who did all the hard work of figuring out what went wrong here. The patch is by far the easy part. :)
Differential Revision: https://reviews.llvm.org/D75964
This was failng on any pre-assigned copy to the VCC bank.
This is something of a workaround for the default implementation in
getInstrMappingImpl, and how it treats copy-like operations in
general.
Copy-like operations are considered to only have one result register
bank, rather than separate banks for each source like a normal
instruction. To avoid potentially mishandling reg_sequence with
impossible operand combinations, the generic implementation errors on
impossible costs. If the bank was already assigned, is treated it
as-if it were an unsatisfiable REG_SEQUENCE mapping. We really don't
get any value from any of what getInstrMappingImpl tries to do for
copies, so just directly emit the simple mapping we really want.
For i32 and i64 cases, X86ISD::SHLD/SHRD are close enough to ISD::FSHL/FSHR that we can use them directly, we just need to account for the operand commutation for SHRD.
The i16 SHLD/SHRD case is annoying as the shift amount is modulo-32 (vs funnel shift modulo-16), so I've added X86ISD::FSHL/FSHR equivalents, which matches the generic implementation in all other terms.
Something I'm slightly concerned with is that ISD::FSHL/FSHR legality is controlled by the Subtarget.isSHLDSlow() feature flag - we don't normally use non-ISA features for this but it allows the DAG combines to continue to operate after legalization in a lot more cases.
The X86 *bits.ll changes are all affected by the same issue - we now have a "FSHR(-1,-1,amt) -> ROTR(-1,amt) -> (-1)" simplification that reduces the dependencies enough for the branch fall through code to mess up.
Differential Revision: https://reviews.llvm.org/D75748
Refines the gather/scatter cost model, but also changes the TTI
function getIntrinsicInstrCost to accept an additional parameter
which is needed for the gather/scatter cost evaluation.
This did require trivial changes in some non-ARM backends to
adopt the new parameter.
Extending gathers and truncating scatters are now priced cheaper.
Differential Revision: https://reviews.llvm.org/D75525
Summary:
Instead of generating two i32 instructions for each load or store of a volatile
i64 value (two LDRs or STRs), now emit LDRD/STRD.
These improvements cover architectures implementing ARMv5TE or Thumb-2.
The code generation explicitly deviates from using the register-offset
variant of LDRD/STRD. In this variant, the register allocated to the
register-offset cannot be reused in any of the remaining operands. Such
restriction seems to be non-trivial to implement in LLVM, thus it is
left as a to-do.
Reviewers: dmgreen, efriedma, john.brawn, nickdesaulniers
Reviewed By: efriedma, nickdesaulniers
Subscribers: danielkiss, alanphipps, hans, nathanchance, nickdesaulniers, vvereschaka, kristof.beyls, hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D70072
If the loaded memory size was smaller than the result size, this would
produce out of bounds memory accesses. I'm wondering if we need a
distinct narrow memory legalize action type, since a case I care about
is decomposing a 4-byte unaligned access into 4 extending loads, which
would leave the original result register type. I'm currently awkwardly
using narrowScalar to handle unaligned accesses that need to be split.
Summary:
Enables JIT-linking by RuntimeDyld of COFF objects that contain references to
dllimport symbols. This is done by recognizing symbols that start with the
reserved "__imp_" prefix and building a pointer entry to the target symbol in
the stubs area of the section. References to the "__imp_" symbol are updated to
point to this pointer.
Work in progress: The generic code is in place, but only RuntimeDyldCOFFX86_64
and RuntimeDyldCOFFI386 have been updated to look for and update references to
dllimport symbols.
Reviewers: compnerd
Subscribers: hiraditya, ributzka, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D75884
This avoids regressions in a future patch. I'm confused by the use of
the gfx9 usage legacy_mad. Was this a pointless instruction rename, or
uses fmul_legacy handling? Why is regular mac avilable in that case?
This essentially reverts some of the SimplifyLibcalls part changes of D45736 [SimplifyLibcalls] Replace locked IO with unlocked IO.
C11 7.21.5.2 The fflush function
> If stream is a null pointer, the fflush function performs this flushing action on all streams for which the behavior is defined above.
i.e. fopen'ed FILE* is inherently captured.
POSIX.1-2017 getc_unlocked, getchar_unlocked, putc_unlocked, putchar_unlocked - stdio with explicit client locking
> These functions can safely be used in a multi-threaded program if and only if they are called while the invoking thread owns the ( FILE *) object, as is the case after a successful call to the flockfile() or ftrylockfile() functions.
After a thread fopen'ed a FILE*, when it is calling foobar() which is now replaced by foobar_unlocked(),
if another thread is concurrently calling fflush(0), the behavior is undefined.
C11 7.22.4.4 The exit function
> Next, all open streams with unwritten buffered data are flushed, all open streams are closed, and all files created by the tmpfile function are removed.
The replacement is only feasible if the program is single threaded, or exit or fflush(0) is never called.
See also http://lists.llvm.org/pipermail/llvm-commits/Week-of-Mon-20180528/556615.html
for how the replacement makes libc interceptors difficult to implement.
dalias: in a worst case, it's unbounded data corruption because of concurrent access to pointers
without synchronization. f->wpos or rpos could get outside of the buffer, thread A could do
f->wpos += j after knowing j is in bounds, while thread B also changes it concurrently.
This can produce exploitable conditions depending on libc internals.
Revert the SimplifyLibcalls part change because the cons obviously
overweigh the pros. Even when the replacement is feasible, the benefit
is indemonstrable, more so in an application instead of an artificial
glibc benchmark. Theoretically the replacement could be beneficial when
calling getc_unlocked/putc_unlocked in a loop, but then it is better
using a blocked IO operation and the user is likely aware of that.
The function attribute inference is still useful and thus kept.
Reviewed By: xbolva00
Differential Revision: https://reviews.llvm.org/D75933
Summary:
This patch extends the TargetMachine to let targets specify the integer size
used by the sjljehprepare pass. This is 64bit for the VE target and otherwise
defaults to 32bit for all targets, which was hard-wired before.
Reviewed By: arsenm
Differential Revision: https://reviews.llvm.org/D71337
Summary: Rewrite the fsub-0.0 idiom to fneg and always emit fneg for fp
negation. This also extends the scalarization cost in instcombine for unary
operators to result in the same IR rewrites for fneg as for the idiom.
Reviewed By: cameron.mcinally
Differential Revision: https://reviews.llvm.org/D75467
In case the source value ends up in a VGPR, insert a readfirstlane to
avoid producing an illegal copy later. If it turns out to be
unnecessary, it can be folded out.
Swap the compare operands if LHS is spilled while updating the CCMask:s of
the CC users. This is relatively straight forward since the live-in lists for
the CC register can be assumed to be correct during register allocation
(thanks to 659efa2).
Also fold a spilled operand of an LOCR/SELR into an LOC(G).
Review: Ulrich Weigand
Differential Revision: https://reviews.llvm.org/D67437
SimplifyAddWithRemainder currently also matches for vector types, but
tries to create an integer constant, which causes a crash.
By using Constant::getIntegerValue() we can support both the scalar and
vector cases.
The 2 added test cases crash without the fix.
Reviewers: spatel, lebedev.ri
Reviewed By: spatel, lebedev.ri
Differential Revision: https://reviews.llvm.org/D75906
SimplifyCFG should not merge empty return blocks and leave a CallBr behind
with a duplicated destination since the verifier will then trigger an
assert. This patch checks for this case and avoids the transformation.
CodeGenPrepare has a similar check which also has a FIXME comment about why
this is needed. It seems perhaps better if these two passes would eventually
instead update the CallBr instruction instead of just checking and avoiding.
This fixes https://bugs.llvm.org/show_bug.cgi?id=45062.
Review: Craig Topper
Differential Revision: https://reviews.llvm.org/D75620
It seems like the SLPVectorizer is currently not aware of vector
versions of functions provided by libraries like Accelerate [1].
This patch updates SLPVectorizer to use the same infrastructure
the LoopVectorizer uses to detect vectorizable library functions.
For calls, it computes the cost of an intrinsic call (existing behavior)
and the cost of a vector function library call, if available. Like
LoopVectorizer, it assumes the cost of the vector function is simply the
cost of a call to a vector function.
[1] https://developer.apple.com/documentation/accelerate
Reviewers: ABataev, RKSimon, spatel
Reviewed By: ABataev
Differential Revision: https://reviews.llvm.org/D75878
Summary:
When SI_INDIRECT_DST_V* pseudos has indexes in VGPR, they get expanded into the self-looped basic block that modifies EXEC in a loop.
To keep EXEC consistent it is stored before and then re-stored after the pseudo expansion result.
%95:vreg_512 = SI_INDIRECT_DST_V16 %93:vreg_512(tied-def 0), %94:sreg_32, 0, killed %1500:vgpr_32
results to
s_mov_b64 s[6:7], exec
BB0_16:
v_readfirstlane_b32 s8, v28
v_cmp_eq_u32_e32 vcc, s8, v28
s_and_saveexec_b64 vcc, vcc
s_set_gpr_idx_on s8, gpr_idx(DST)
v_mov_b32_e32 v6, v25
s_set_gpr_idx_off
s_xor_b64 exec, exec, vcc
s_cbranch_execnz BB0_16
; %bb.17:
s_mov_b64 exec, s[6:7]
The bug appeared in case this expansion occurs in the ELSE block of the CF.
Originally
%110:vreg_512 = SI_INDIRECT_DST_V16 %103:vreg_512(tied-def 0), %85:vgpr_32, 0, %107:vgpr_32,
%112:sreg_64 = SI_ELSE %108:sreg_64, %bb.19, 0, implicit-def dead $exec, implicit-def dead $scc, implicit $exec
expanded to
****************** <== here exec has "THEN" context
s_mov_b64 s[6:7], exec
BB0_16:
v_readfirstlane_b32 s8, v28
v_cmp_eq_u32_e32 vcc, s8, v28
s_and_saveexec_b64 vcc, vcc
s_set_gpr_idx_on s8, gpr_idx(DST)
v_mov_b32_e32 v6, v25
s_set_gpr_idx_off
s_xor_b64 exec, exec, vcc
s_cbranch_execnz BB0_16
; %bb.17:
s_or_saveexec_b64 s[4:5], s[4:5] <-- exec mask is restored for "ELSE" but immediately overwritten.
s_mov_b64 exec, s[6:7]
The rest of the "ELSE" block is executed not by the workitems which constitute the "else mask" but by those which constitute "then mask"
SILowerControlFlow::emitElse always considers the basic block begin() as an insertion point for s_or_saveexec.
Proposed fix: The SI_INDIRECT_DST_V* procedure should split the reminder block to create landing pad for the EXEC restoration.
Reviewers: rampitec, vpykhtin, nhaehnle
Reviewed By: vpykhtin
Subscribers: arsenm, kzhuravl, jvesely, wdng, yaxunl, dstuttard, tpr, t-tye, hiraditya, kerbowa, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D75472
On some Arm cores there is a performance penalty when forwarding from an
S register to a D register. Calculating VMAX in a D register creates
false forwarding hazards, so don't do that unless we're on a core which
specifically asks for it.
Patch by James Greenhalgh
Differential Revision: https://reviews.llvm.org/D75248
For pre-AVX512 targets, combine binary shuffles to X86ISD::VPERM2X128 if possible. This mainly helps optimize the blend(extract_subvector(x,1),y) pattern.
At some point soon we're going to have make a decision about when to combine AVX512 shuffles more aggressively - we bail out if there is any change in element size (to protect predicate mask merging) which means we miss out on a lot of optimizations.
Iterate through the loop and check that the observable values
produced are the same whether tail predication happens or not.
We want to find out if the tail-predicated version of this loop will
produce the same values as the loop in its original form. For this to
be true, the newly inserted implicit predication must not change the
the (observable) results.
We're doing this because many instructions in the loop will not be
predicated and so the conversion from VPT predication to tail
predication can result in different values being produced, because of
falsely predicated lanes not being updated in the converted form.
A masked load, whether through VPT or tail predication, will write
zeros to any of the falsely predicated bytes. So, from the loads, we
know that the false lanes are zeroed and here we're trying to track
that those false lanes remain zero, or where they change, the
differences are masked away by their user(s).
All MVE loads and stores have to be predicated, so we know that any
load operands, or stored results are equivalent already. Other
explicitly predicated instructions will perform the same operation in
the original loop and the tail-predicated form too. Because of this,
we can insert loads, stores and other predicated instructions into
our KnownFalseZeros set and build from there.
Differential Revision: https://reviews.llvm.org/D75452
When hashing on MachineOperand::MO_ConstantPoolIndex, now MIR-Canon and
MIRVRegNamer will no longer result in a hash collision.
Differential Revision: https://reviews.llvm.org/D74449
When expanding scalar packed operations, we should not introduce
illegal vector casts LegalizerHelper introduces. We're not in a
legalizer context, and there's no RegBankSelect apply or legalize
worklist.
We weren't considering the packed case correctly, and this was passing
through to the selector. The selector only checked the size, so this
would incorrectly compile to a single 32-bit scalar add.
As usual, the LegalizerHelper is somewhat awkward to use from
applyMappingImpl. I think this is the first place we've needed
multi-step legalization here though.
a tail call
Previosly ARC optimizer removed the autoreleaseRV/retainRV pair in the
following code, which caused the object returned by @something to be
placed in the autorelease pool because the call to @something isn't a
tail call:
```
%call = call i8* @something(...)
%2 = call i8* @objc_retainAutoreleasedReturnValue(i8* %call)
%3 = call i8* @objc_autoreleaseReturnValue(i8* %2)
ret i8* %3
```
Fix the bug by checking whether @something is a tail call.
rdar://problem/59275894
Most importantly, this fixes ret i8. Also make sure to handle
signext/zeroext for odd types > i32. Some of the corresponding
argument passing fixes also need to be handled.
Interpret these as extending to the next multiple of 32-bits. This had
no effect with i48 for example, which is really split into {i32, i16},
which should extend the high part.
Use a hack to only enable this for GlobalISel.
Technically this also works with SelectionDAG, but the divergence
selection isn't reliable enough and a few cases fail, but I have no
desire to spend time writing the manual expansion code for it. The DAG
actually does a better job since it catches using v_add_lshl_u32 in
the mixed SGPR/VGPR cases.
If we don't need the upper subvector elements of the BLENDI node then use a smaller vector size.
This causes a couple of minor regressions in insertelement-ones.ll which are more examples of PR26018; given how cheap allones generation is I don't consider that a showstopper, just an annoyance (and there's plenty of other poor codegen cases in that file).
If we're inserting a scalar that is smaller than the element
size of the final VT, the value of the extra bits doesn't matter.
Previously we any_extended in the scalar domain before inserting.
This patch changes this to use a broadcast of the original
scalar type and then a bitcast to the final type. This might
enable the use of a broadcast load.
This recovers regressions from 07d68c24aa
and 9fcd212e2f without relying on
alignment of the load.
Differential Revision: https://reviews.llvm.org/D75835
Summary: As discussed in D75505, it's not particularly useful to change the type of a load to/from floating-point/integer because it's followed by a bitcast, and it might lead to surprising code generation. Check that this doesn't generally happen.
Reviewers: lebedev.ri
Subscribers: jkorous, dexonsmith, ributzka, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D75644
If a call argument has the "returned" attribute, we can simplify
the call to the value of that argument. The "-inst-simplify" pass
already handled this for the constant integer argument case via
known bits, which is invoked in SimplifyInstruction. However,
non-constant (or non-int) arguments are not handled at all right now.
This addresses one of the regressions from D75801.
Differential Revision: https://reviews.llvm.org/D75815
When simplifying a call without uses, replaceInstUsesWith() is
going to do nothing, but we'll skip all following folds. We can
only run into this problem with calls that both simplify and are
not trivially dead if unused, which currently seems to happen only
with calls to undef, as the test diff shows. When extending
SimplifyCall() to handle "returned" attributes, this becomes a much
bigger problem, so I'm fixing this first.
Differential Revision: https://reviews.llvm.org/D75814
As pointed out by jdoerfert on D75815, we must be careful when
simplifying musttail calls: We can only replace the return value
if we can eliminate the call entirely. As we can't make this
guarantee for all consumers of InstSimplify, this patch disables
simplification of musttail calls. Without this patch, musttail
simplification currently results in module verification errors.
Differential Revision: https://reviews.llvm.org/D75824
This patch introduces the propagation of known information based on path exploration.
For example,
```
int u(int c, int *p){
if(c) {
return *p;
} else {
return *p + 1;
}
}
```
An argument `p` is dereferenced whatever c's value is.
For an instruction `CtxI`, we accumulate branch instructions in the must-be-executed-context of `CtxI` and then, we take the conjunction of the successors' known state.
Reviewed By: jdoerfert
Differential Revision: https://reviews.llvm.org/D65593
This was selecting VBROADCASTW which turned the 8-bit load into
a 16-bit load if it happened to be 2 byte aligned.
I have a plan to fix the regression with a follow up patch
which I'll post shortly.
opcode (extelt V0, Ext0), (ext V1, Ext1) --> extelt (opcode (splat V0, Ext0), V1), Ext1
The first part of this patch generalizes the cost calculation to accept
different extraction indexes. The second part creates a shuffle+extract
before feeding into the existing code to create a vector op+extract.
The patch conservatively uses "TargetTransformInfo::SK_PermuteSingleSrc"
rather than "TargetTransformInfo::SK_Broadcast" (splat specifically
from element 0) because we do not have a more general "SK_Splat"
currently. That does not affect any of the current regression tests,
but we might be able to find some cost model target specialization where
that comes into play.
I suspect that we can expose some missing x86 horizontal op codegen with
this transform, so I'm speculatively adding a debug flag to disable the
binop variant of this transform to allow easier testing.
The test changes show that we're sensitive to cost model diffs (as we
should be), so that means that patches like D74976
should have better coverage.
Differential Revision: https://reviews.llvm.org/D75689
Summary:
Assume bundles need to be usable by Analysis and Transforms/Utils isn't.
so this commit moves utilities to deal with asusme bundles to IR.
Reviewers: jdoerfert
Reviewed By: jdoerfert
Subscribers: mgorny, hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D75618
Fixes a regression from D75801. SimplifyDemandedUseBits() is also
supposed to compute the known bits (of the demanded subset) of the
instruction. For unknown instructions it does so by directly calling
computeKnownBits(). For known instructions it will compute known
bits itself. However, for instructions where only some cases are
handled directly (e.g. a constant shift amount) the known bits
invocation for the unhandled case is sometimes missing. This patch
adds the missing calls and thus removes the main discrepancy with
ExpensiveCombines mode.
Differential Revision: https://reviews.llvm.org/D75804
It is possible that an instruction to be changed to unreachable is
in the same block with a terminator that can be constant-folded.
In this case, as of now, the instruction will be changed to
unreachable before the terminator is folded. But, then the
whole BB becomes invalidated and so when we go ahead to fold
the terminator, we trap.
Change the order of these two.
Differential Revision: https://reviews.llvm.org/D75780
This reverts commit 5583c2f2fb.
The lldb bot failure was a test that was fragile and sensitive to irrelevant
changes in instruction ordering. Re-committing this as the test should have
been skipped for AArch64 now.
Differential Revision: https://reviews.llvm.org/D75555
With the addition of the LLD time tracing it made sense to include coverage
for LLVM's various passes. Doing so ensures that ThinLTO is also covered
with a time trace.
Before:
{F11333974}
After:
{F11333928}
Reviewed By: rnk
Differential Revision: https://reviews.llvm.org/D74516
In 172eee9c, we tried to avoid these by modelling the callee as
internally resetting the stack pointer.
However, for the majority of functions with reserved stack frames, this
would lead LLVM to emit extra SP adjustments to undo the callee's
internal adjustment. This lead us to fix the problem further on down the
pipeline in eliminateCallFramePseudoInstr. In 5b79e603d3, I added
use a heuristic to try to detect when the adjustment would be
unreachable.
This heuristic is imperfect, and when exception handling is involved, it
fails to fire. The new test is an example of this. Simply throwing an
exception with an active cleanup emits dead SP adjustments after the
throw. Not only are they dead, but if they were executed, they would be
incorrect, so they are confusing.
This change essentially reverts 172eee9c and makes the 5b79e603d3
heuristic responsible for preventing unreachable stack adjustments. This
means we may emit unreachable stack adjustments for functions using EH
with unreserved call frames, but that is not very many these days. Back
in 2016 when this change was added, we were focused on 32-bit, which we
observed to have fewer reserved frames.
Fixes PR45064
Reviewed By: hans
Differential Revision: https://reviews.llvm.org/D75712
As mentioned in the comments, extractelement is special
since we actually want a scalar base for that element we extracted from
the vector (i.e. not a vector base).
This same logic should apply to uses of the extractelement such as phis
and selects which have the same BDV as the extractelement.
Howeber, for these uses we conservatively mark the BDV state as
conflict, since setting the EE's new base BDV does not always dominate
these uses.
Added testcase showcases the problem where the BDV identification chokes
on the incorrect cast from vector to scalar for the phi use of
extractelement.
Tests-Run: make check, internal fuzzer testing
Reviewers: reames, skatkov, dantrushin
Reviewed-By: dantrushin
Differential Revision: https://reviews.llvm.org/D75704
Summary:
Dollar signed prefixed integers were not allowed by the AsmParser to be
used as Identifiers, differing from the GNU assembler behavior.
This patch updates the parsing of Identifiers to consider such cases as
valid, where the identifier string includes the $ prefix itself. As the
Lexer currently splits these occurrences into separate tokens, those
need to be combined by the AsmParser itself.
Reviewers: efriedma, chill
Reviewed By: efriedma
Subscribers: sdardis, hiraditya, jrtc27, atanasyan, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D75111
Summary:
ARMAsmParser was incorrectly dropping a leading dollar sign character
from symbol names in targets of branch instructions. This was caused by
an incorrect assumption that the contents following the dollar sign
token should be handled as a constant immediate, similarly to the #
token.
This patch avoids the operand parsing from consuming the dollar sign
token when it is followed by an identifier, making sure it is properly
parsed as part of the expression.
Reviewers: efriedma
Reviewed By: efriedma
Subscribers: danielkiss, chill, carwil, vhscampos, kristof.beyls, hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D73176
This is a follow-up for D75609. As @dblaikie suggested, it prints
the actual number for an unknown section identifier when dumping
unit index sections.
Differential Revision: https://reviews.llvm.org/D75668
Handle LinkOnceODRLinkage;
Handle AppendingLinkage type for llvm.global_ctors/dtors static init global arrays;
Differential Revision: https://reviews.llvm.org/D75305
As noted on D75114, if both arguments of a funnel shift are consecutive loads we are missing the opportunity to combine them into a single load.
Differential Revision: https://reviews.llvm.org/D75624
Currently `yaml2obj` require `Offset` field in a relocation description.
There are many cases when `Offset` is insignificant in a context of a test case.
Making `Offset` optional allows to simplify our test cases.
This is what this patch does.
Also, with this patch `obj2yaml` does not dump a zero offset of a relocation.
Differential revision: https://reviews.llvm.org/D75608
The intention was to remove the `Object/X86/yaml-elf-x86-rel-broken.yaml test`,
This test is at the wrong place.
`yaml-elf-x86-rel-broken.yaml` was introduced in
rG892c6c86ea25dc97668ff1f1b7bf1108e85fa5ec to check that
yaml2obj can use an arbitrary `Hex32` value as a relocation type.
We have tests that check the similar functionality.
I've improved them and removed the `yaml-elf-x86-rel-broken.yaml`
Differential revision: https://reviews.llvm.org/D75679
If we infer the dso_local flag for -fpic, dso_local should be dropped
when we convert a GlobalVariable a declaration. dso_local causes the
generation of direct access (e.g. R_X86_64_PC32). Such relocations referencing
STB_GLOBAL STV_DEFAULT objects are not allowed in a -shared link.
Reviewed By: tejohnson
Differential Revision: https://reviews.llvm.org/D74749
The new behavior matches GNU objdump. A pair of angle brackets makes tests slightly easier.
`.foo:` is not unique and thus cannot be used in a `CHECK-LABEL:` directive.
Without `-LABEL`, the CHECK line can match the `Disassembly of section`
line and causes the next `CHECK-NEXT:` to fail.
```
Disassembly of section .foo:
0000000000001634 .foo:
```
Bdragon: <> has metalinguistic connotation. it just "feels right"
Reviewed By: rupprecht
Differential Revision: https://reviews.llvm.org/D75713
Summary:
The widenIVUse avoids generating trunc by evaluating the use as AddRec, this
will not work when:
1) SCEV traces back to an instruction inside the loop that SCEV can not
expand, eg. add %indvar, (load %addr)
2) SCEV finds a loop variant, eg. add %indvar, %loopvariant
While SCEV fails to avoid trunc, we can still try to use instruction
combining approach to prove trunc is not required. This can be further
extended with other instruction combining checks, but for now we handle the
following case (sub can be "add" and "mul", "nsw + sext" can be "nus + zext")
```
Src:
%c = sub nsw %b, %indvar
%d = sext %c to i64
Dst:
%indvar.ext1 = sext %indvar to i64
%m = sext %b to i64
%d = sub nsw i64 %m, %indvar.ext1
```
Therefore, as long as the result of add/sub/mul is extended to wide type with
right extension and overflow wrap combination, no
trunc is required regardless of how %b is generated. This pattern is common
when calculating address in 64 bit architecture.
Note that this patch reuse almost all the code from D49151 by @az:
https://reviews.llvm.org/D49151
It extends it by providing proof of why trunc is unnecessary in more general case,
it should also resolve some of the concerns from the following discussion with @reames.
http://lists.llvm.org/pipermail/llvm-commits/Week-of-Mon-20180910/585945.html
Reviewers: sanjoy, efriedma, sebpop, reames, az, javed.absar, amehsan
Reviewed By: az, amehsan
Subscribers: hiraditya, llvm-commits, amehsan, reames, az
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D73059
Previously for any copy from a register bigger than the destination:
Copied to a same-sized register in the destination register bank.
Subregister copy of that to the destination.
This fails for copies from 128-bit FPRs to GPRs because the GPR register bank
can't accomodate 128-bit values.
Instead of special-casing such copies to perform the truncation beforehand in
the source register bank, generalize this:
a) Perform a subregister copy straight from source register whenever possible.
This results in shorter MIR and fixes the above problem.
b) Perform a full copy to target bank and then do a subregister copy only if
source bank can't support target's size. E.g. GPR to 8-bit FPR copy.
Patch by Raul Tambre (tambre)!
Differential Revision: https://reviews.llvm.org/D75421
This fixes several issues. The behavior changes are:
A SHN_COMMON symbol does not have the 'g' flag.
An undefined symbol does not have 'g' or 'l' flag.
A STB_GLOBAL SymbolRef::ST_Unknown symbol has the 'g' flag.
A STB_LOCAL SymbolRef::ST_Unknown symbol has the 'l' flag.
Reviewed By: rupprecht
Differential Revision: https://reviews.llvm.org/D75659
This changes the output of `llvm-readelf -n` from:
```
Displaying notes found at file offset 0x<...> with length 0x<...>:
```
to:
```
Displaying notes found in: .note.foo
```
And similarly, adds a `Name:` field to the `llvm-readobj -n` output for notes.
This change not only increases GNU compatibility, it also makes it much easier to read notes. Note that we still fall back to printing the file offset/length in cases where we don't have a section name, such as when printing notes in program headers or printing notes in a partially stripped file (GNU readelf does the same).
Fixes llvm.org/PR41339.
Reviewed By: MaskRay
Differential Revision: https://reviews.llvm.org/D75647
Summary:
This seems like an obvious error - cut and paste issue?
The change does make a change to one of the lit tests - it stops s_buffer_load
re-ordering past an MUBUF instruction (which is not surprising).
Change-Id: I80be99de5b62af4f42e91af2591b76a52ac9efa6
Subscribers: arsenm, kzhuravl, jvesely, wdng, nhaehnle, yaxunl, tpr, t-tye, hiraditya, kerbowa, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D75686
This is a follow up to the previous patch: [AIX] Implement caller
arguments passed in stack memory.
This corrects a defect in AIX 64-bit where an i32 is written to the
stack with stw (4 bytes) rather than the expected std (8 bytes.) Integer
arguments pass on the stack as images of their register representation.
I also took the opportunity to tidy up some of the calling convention
AIX tests I added in my last commit. This patch adds the missed assembly
expected output for the stack arg int case, which would have caught this
problem.
Differential Revision: https://reviews.llvm.org/D75126
Summary:
```
br i1 c, BB1, BB2:
BB1:
use1(c)
BB2:
use2(c)
```
In BB1 and BB2, c is never undef or poison because otherwise the branch would have triggered UB.
This is a resubmission of 952ad47 with crash fix of llvm/test/Transforms/LoopRotate/freeze-crash.ll.
Checked with Alive2
Reviewers: xbolva00, spatel, lebedev.ri, reames, jdoerfert, nlopes, sanjoy
Reviewed By: reames
Subscribers: jdoerfert, hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D75401
This fixes printing long values that might reside in CIE and FDE,
including offsets, lengths, and addresses.
Differential Revision: https://reviews.llvm.org/D73887
The condition was not accurate enough and could interpret some FDEs in
.eh_frame or 64-bit DWARF .debug_frame sections as CIEs. Even though
such FDEs are unlikely in a normal situation, the wrong interpretation
could hide an issue in a buggy generator.
Differential Revision: https://reviews.llvm.org/D73886
After structurization, some phi nodes can have a single incoming edge
and can be simplified away. This change runs a simplify query on all
phis that are either modified or added by the structurizer. This also
moves some phis closer to their use as a side benefit.
Reviewed By: arsenm
Differential Revision: https://reviews.llvm.org/D75500
Summary:
Move the check for malformed REBASE_OPCODE_ADD_ADDR_IMM_SCALED and
BIND_OPCODE_DO_BIND_ADD_ADDR_IMM_SCALED opcodes after the immediate
has been applied to the SegmentOffset. This fixes specious errors
where SegmentOffset is pointing between two sections when trying to
correct the SegmentOffset value.
Update the regression tests to verify the proper error message.
Reviewers: pete, ab, lhames, steven_wu, jhenderson
Reviewed By: pete
Subscribers: hiraditya, dexonsmith, rupprecht, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D75629
A DWARFSectionKind is read from input. It is not validated on parsing,
so an unexpected value may result in reaching llvm_unreachable() in
DWARFUnitIndex::getColumnHeader() when dumping the index section.
Differential Revision: https://reviews.llvm.org/D75609
PowerPC hits an assertion due to somewhat the same reason as https://reviews.llvm.org/D70975.
Though there are already some hack, it still failed with some case, when the operand 0 is NOT
a const fp, it is another fma that with const fp. And that const fp is negated which result in multi-uses.
A better fix is to check the uses of the negated const fp. If there are already use of its negated
value, we will have benefit as no extra Node is added.
Differential revision: https://reviews.llvm.org/D75501
YAML files were not being run during lit testing as there was no lit.local.cfg file. Once this was fixed, some buildbots would fail due to a StringRef that pointed to a std::string inside of a temporary llvm::Triple object. These issues are fixed here by making a local triple object that stays around long enough so the StringRef points to valid data. Fixed memory sanitizer bot bugs as well.
Differential Revision: https://reviews.llvm.org/D75390
If we have an explicit align directive, we currently default to emitting nops to fill the space. As discussed in the context of the prefix padding work for branch alignment (D72225), we're allowed to play other tricks such as extending the size of previous instructions instead.
This patch will convert near jumps to far jumps if doing so decreases the number of bytes of nops needed for a following align. It does so as a post-pass after relaxation is complete. It intentionally works without moving any labels or doing anything which might require another round of relaxation.
The point of this patch is mainly to mock out the approach. The optimization implemented is real, and possibly useful, but the main point is to demonstrate an approach for implementing such "pad previous instruction" approaches. The key notion in this patch is to treat padding previous instructions as an optional optimization, not as a core part of relaxation. The benefit to this is that we avoid the potential concern about increasing the distance between two labels and thus causing further potentially non-local code grown due to relaxation. The downside is that we may miss some opportunities to avoid nops.
For the moment, this patch only implements a small set of existing relaxations.. Assuming the approach is satisfactory, I plan to extend this to a broader set of instructions where there are obvious "relaxations" which are roughly performance equivalent.
Note that this patch *doesn't* change which instructions are relaxable. We may wish to explore that separately to increase optimization opportunity, but I figured that deserved it's own separate discussion.
There are possible downsides to this optimization (and all "pad previous instruction" variants). The major two are potentially increasing instruction fetch and perturbing uop caching. (i.e. the usual alignment risks) Specifically:
* If we pad an instruction such that it crosses a fetch window (16 bytes on modern X86-64), we may cause the decoder to have to trigger a fetch it wouldn't have otherwise. This can effect both decode speed, and icache pressure.
* Intel's uop caching have particular restrictions on instruction combinations which can fit in a particular way. By moving around instructions, we can both cause misses an change misses into hits. Many of the most painful cases are around branch density, so I don't expect this to be too bad on the whole.
On the whole, I expect to see small swings (i.e. the typical alignment change problem), but nothing major or systematic in either direction.
Differential Revision: https://reviews.llvm.org/D75203
Previously we tried to promote these to xmm/ymm/zmm by promoting
in the X86CallingConv.td file. But this breaks when we run out
of xmm/ymm/zmm registers and need to fall back to memory. We end
up trying to create a non-sensical scalar to vector. This lead
to an assertion. The new tests in avx512-calling-conv.ll all
trigger this assertion.
Since we really want to treat these types like we do on avx2,
it seems better to promote them before the calling convention
code gets involved. Except when the calling convention is one
that passes the vXi1 type in a k register.
The changes in avx512-regcall-Mask.ll are because we indicated
that xmm/ymm/zmm types should be passed indirectly for the
Win64 ABI before we go to the common lines that promoted the
vXi1 types. This caused the promoted types to be picked up by
the default calling convention code. Now we promote them earlier
so they get passed indirectly as though they were xmm/ymm/zmm.
Differential Revision: https://reviews.llvm.org/D75154
Currently dsymutil when generating accelerator tables will attempt to strip the template parameters from names for subroutines.
For some overload operators which contain < in their names e.g. operator< the current method ends up stripping the operator name as well,
we just end up with the name operator in the table for each case.
Differential Revision: https://reviews.llvm.org/D75545
I believe this is the correct fix for D75506 rather than disabling all commuting. We can still commute the remaining two sources.
Differential Revision:m https://reviews.llvm.org/D75526
InstSimplify can fold icmps of gep where the base pointers are the
same and the offsets are constant. It does so by constructing a
constant expression icmp and assumes that it gets folded -- but
this doesn't actually happen, because GEP expressions can usually
only be folded by the target-dependent constant folding layer.
As such, we need to explicitly invoke it here.
Differential Revision: https://reviews.llvm.org/D75407
Create a wider source vector, and unmerge with dead defs like the
legalizer. The legalization handling for G_EXTRACT is incomplete, and
it's preferrable to keep everything in 32-bit pieces.
We should probably start moving these functions into utils, since we
have a growing number of places that do almost the same thing.
Since this is still largely relying on the DAG argument type lowering
code, this has inherited the problem where i16 vectors have a
different ABI on targets with and without legal i16. Switch to using a
target with legal i16, so the i16 vector argument tests are more
useful.
https://reviews.llvm.org/D42848 only handled CFA related cfi directives but
didn't handle CSR related cfi. The patch adds the CSR part. Basically it reuses
the framework created in D42848. For each basicblock, the patch tracks which
CSR set have been saved at its CFG predecessors's exits, and compare the CSR
set with the set at its previous basicblock's exit (The previous block is the
block laid before the current block). If the saved CSR set at its previous
basicblock's exit is larger, .cfi_restore will be inserted.
The patch also generates proper .cfi_restore in epilogue to make sure the
saved CSR set is consistent for the incoming edges of each block.
Differential Revision: https://reviews.llvm.org/D74303
As the test case shows if there is an ExtractValueInst in the Ret block, function dupRetToEnableTailCallOpts can't duplicate it into the block containing call. So later no tail call is generated in CodeGen.
This patch adds the ExtractValueInst handling code in function dupRetToEnableTailCallOpts and FoldReturnIntoUncondBranch, and later tail call can be generated for this case.
Differential Revision: https://reviews.llvm.org/D74242
This teaches Loop Strength Reduction the details about masked load and
store address operands, so that it can have a better time optimising
them as it would for normal loads and stores.
Differential Revision: https://reviews.llvm.org/D75371
This makes sure that the constant expression bitcast goes through
target-dependent constant folding, and thus avoids an additional
iteration of InstCombine.
The initial placement of vector-combine in the opt pipeline revealed phase ordering bugs:
https://bugs.llvm.org/show_bug.cgi?id=45015https://bugs.llvm.org/show_bug.cgi?id=42022
This patch contains a few independent changes:
1. Move the pass up in the pipeline, so it happens just after loop-vectorization.
This is only to keep vectorization passes together in the pipeline at the moment.
I don't have evidence of interaction between these yet.
2. Add an -early-cse pass after -vector-combine to clean up redundant ops. This was
partly proposed as far back as rL219644 (which is why it's effectively being moved
in the old PM code). This is important because the subsequent -instcombine doesn't
work as well without EarlyCSE. With the CSE, -instcombine is able to squash
shuffles together in 1 of the tests (because those are simple "select" shuffles).
3. Remove the -vector-combine pass that was running after SLP. We may want to do that
eventually, but I don't have a test case to support it yet.
Differential Revision: https://reviews.llvm.org/D75145
As discussed in the commit thread for rGa253a2a and D73978, we can do more undef folding for FP ops.
The nnan and ninf fast-math-flags specify that if an operand is the disallowed value, the result is
poison, so we can produce an undef result.
But this doesn't work as expected (the undef operand cases remain) because of a Flags propagation
problem in SelectionDAGBuilder.
I've added DAGCombiner calls to enable these for the other cases because we've shown in other
patches that (because of the limited way that SDAG iterates), it is possible to miss simplifications
like this if they are done only at node creation time.
Several potential follow-ups to expand on this patch are possible.
Differential Revision: https://reviews.llvm.org/D75576
If SimplifyDemandedBits succeeds in simplifying the byte src, add the CVT_F32_UBYTE node back to the worklist as we might be able to simplify further.
Yet another step towards removing SelectionDAG::GetDemandedBits.
- Added handling of thin archives to symtab.test.
- Added handling of newlines to response.test.
- 62fa3332c9 exposed behaviour
regarding the use of -- on the command line. Added
double-hyphen.test to cover this.
Differential Revision: https://reviews.llvm.org/D73333
Summary:
The VSHLC instruction performs a left shift of a whole vector register
by an immediate shift count up to 32, shifting in new bits at the low
end from a GPR and delivering the shifted-out bits from the high end
back into the same GPR.
Since the instruction produces two outputs (the shifted vector
register and the output GPR of shifted-out bits), it has to be
instruction-selected in C++ rather than Tablegen.
Reviewers: MarkMurrayARM, dmgreen, miyuki, ostannard
Reviewed By: miyuki
Subscribers: kristof.beyls, hiraditya, cfe-commits, llvm-commits
Tags: #clang, #llvm
Differential Revision: https://reviews.llvm.org/D75445
Summary:
These are exactly parallel to the existing `vadciq` intrinsics, which
we implemented last year as part of the original MVE intrinsics
framework setup.
Just like VADC/VADCI, the MVE VSBC/VSBCI instructions deliver two
outputs, both of which the intrinsic exposes: a modified vector
register and a carry flag. So they have to be instruction-selected in
C++ rather than Tablegen. However, in this case, that's trivial: the
same C++ isel routine we already have for VADC works unchanged, and
all we have to do is to pass it a different instruction id.
Reviewers: MarkMurrayARM, dmgreen, miyuki, ostannard
Reviewed By: miyuki
Subscribers: kristof.beyls, hiraditya, cfe-commits, llvm-commits
Tags: #clang, #llvm
Differential Revision: https://reviews.llvm.org/D75444
Summary:
```
br i1 c, BB1, BB2:
BB1:
use1(c)
BB2:
use2(c)
```
In BB1 and BB2, c is never undef or poison because otherwise the branch would have triggered UB.
Checked with Alive2
Reviewers: xbolva00, spatel, lebedev.ri, reames, jdoerfert, nlopes, sanjoy
Reviewed By: reames
Subscribers: jdoerfert, hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D75401
This changes the localizer to attempt intra-block localizer of instructions
that have local uses. This is useful because sometimes the entry block itself
has many uses of constant-like instructions, which would benefit from shortening
live ranges. Previously if an inst had no non-local uses, we wouldn't add it to
the list of instructions to attempt further intra-block localization.
This gives a 0.7% geomean code size improvement on CTMark.
Differential Revision: https://reviews.llvm.org/D75555
This option can be used to for JITLink to link as-if the target memory slab were
allocated at a specific start address. This can be used to both verify that
cross-address space linking is working correctly, and to ensure that certain
address-sensitive optimizations (e.g. GOT and stub elimination) either do or do
not fire, depending on the requirements of the test case.
This argument is only valid for testing in conjunction with -noexec -slab-alloc,
and will produce an error if used without those arguments.
The computation here didn't really make sense to me, and reported
wildy different results depending on the flat work group size
attribute.
I think this should really report a range derived from the possible
work group size bounds, and only allow an occupancy that is a multiple
of the group size.
Summary:
https://gist.github.com/modocache/ed7c62f6e570766c0f39b35dad675c2f
is an example of a small C++ program that uses C++20 coroutines that
is difficult to debug, due to the loss of debug info for variables that
"spill" across coroutine suspension boundaries. This patch addresses
that issue by inserting 'llvm.dbg.declare' intrinsics that point the
debugger to the variables' location at an offset to the coroutine frame.
With this patch, I confirmed that running the 'frame variable' commands in
https://gist.github.com/modocache/ed7c62f6e570766c0f39b35dad675c2f at
the specified breakpoints results in the correct values being printed
for coroutine frame variables 'i' and 'j' when using an lldb built from
trunk, as well as with gdb 8.3 (lldb 9.0.1, however, could not print the
values). The added test case also verifies this improved behavior.
The existing coro-debug.ll test case is also modified to reflect the
locations at which Clang actually places calls to 'dbg.declare', and
additional checks are added to ensure this patch works as intended in that
example as well.
Reviewers: vsk, jmorse, GorNishanov, lewissbaker, wenlei
Subscribers: EricWF, aprantl, hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D75338
Summary:
This change checks for the return type in the frontend and adds a flag
to the DISubroutineType to indicate that the option should be added in
CodeViewDebug.
Previously function types sometimes appeared twice in the PDB: once with
"returns cxx udt" and once without.
See https://bugs.llvm.org/show_bug.cgi?id=44785.
Reviewers: rnk, asmith
Subscribers: hiraditya, cfe-commits, llvm-commits
Tags: #clang, #llvm
Differential Revision: https://reviews.llvm.org/D75215
This fixes a miscompile that happened because a DBG_VALUE interfered
with the MachineOutliner's liveness analysis.
Inserting a DBG_VALUE after a terminator breaks predicates on MBB such
as isReturnBlock(). And the resulting DBG_VALUE cannot be "live".
I plan to introduce a MachineVerifier check for this situation in a
follow up.
rdar://59859175
Testing: check-llvm, LNT build with a stage2 compiler & entry values
enabled
Differential Revision: https://reviews.llvm.org/D75548
uops.info says these should be 15 cycle instructions. Uops.info also shows the 512-bit form uses port 0 and 5 for both register and memory. We had memory using 0 and 1.
Differential Revision: https://reviews.llvm.org/D75549
If we go with D75412, we no longer depend on the scalar type directly. So we don't need to avoid using i64. We already have AVX1 fallback patterns with i32 and i64 scalar types so we don't need to avoid using integer types on AVX1.
Differential Revision: https://reviews.llvm.org/D75413
Summary: This patch adds an analysis pass to collect loop nests and
summarize properties of the nest (e.g the nest depth, whether the nest
is perfect, what's the innermost loop, etc...).
The motivation for this patch was discussed at the latest meeting of the
LLVM loop group (https://ibm.box.com/v/llvm-loop-nest-analysis) where we
discussed
the unimodular loop transformation framework ( “A Loop Transformation
Theory and an Algorithm to Maximize Parallelism”, Michael E. Wolf and
Monica S. Lam, IEEE TPDS, October 1991). The unimodular framework
provides a convenient way to unify legality checking and code generation
for several loop nest transformations (e.g. loop reversal, loop
interchange, loop skewing) and their compositions. Given that the
unimodular framework is applicable to perfect loop nests this is one
property of interest we expose in this analysis. Several other utility
functions are also provided. In the future other properties of interest
can be added in a centralized place.
Authored By: etiotto
Reviewer: Meinersbur, bmahjour, kbarton, Whitney, dmgreen, fhahn,
reames, hfinkel, jdoerfert, ppc-slack
Reviewed By: Meinersbur
Subscribers: bryanpkc, ppc-slack, mgorny, hiraditya, llvm-commits
Tag: LLVM
Differential Revision: https://reviews.llvm.org/D68789
```
// clang -c -gdwarf-5 a.s -o a.o
.section .init; ret
.text; ret
```
.debug_info contains DW_AT_ranges and llvm-dwarfdump will report
a verification error because .debug_rnglists does not exist (not
implemented).
This patch generates .debug_rnglists for assembly files.
emitListsTableHeaderStart() in DwarfDebug.cpp can be shared with
MCDwarf.cpp. Because CodeGen depends on MC, I move the function to
MCDwarf.cpp
Reviewed By: probinson
Differential Revision: https://reviews.llvm.org/D75375
Summary:
Follow up from D75377. If the subvector is byte sized and the
index is aligned to the subvector size, we can shrink the load.
Reviewers: spatel, RKSimon
Reviewed By: RKSimon
Subscribers: dbabokin, hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D75434
The build_vector needs to be the only user of the data, but the
chain will likely have another use. So we can't make sure the
build_vector is the only user of the node.
The expected output is erroneous and will be corrected alongside a fix
to ensure stack arguments are widened to register width before writing
to the parameter save area.
On SystemZ there are a set of "access registers" that can be copied in and
out of 32-bit GPRs with special instructions. These instructions can only
perform the copy using low 32-bit parts of the 64-bit GPRs. However, the
default register class for 32-bit integers is GRX32, which also contains the
high 32-bit part registers.
In order to never end up with a case of such a COPY into a high reg, this
patch adds a new simple pre-RA pass that selects such COPYs into target
instructions.
This pass also handles COPYs from CC (Condition Code register), and COPYs to
CC can now also be emitted from a high reg in copyPhysReg().
Fixes: https://bugs.llvm.org/show_bug.cgi?id=44254
Review: Ulrich Weigand.
Differential Revision: https://reviews.llvm.org/D75014
Use MIOperand in collectLocalKilledOperands to make the search
global, as we already have to search for global uses too. This
allows us to delete more dead code when tail predicating.
Differential Revision: https://reviews.llvm.org/D75167
SUMMARY:
1.if there is a gap between the end virtual address of one section and the beginning virtual address of the next section, the XCOFFObjectWriter.cpp will hit a assert.
2.as discussed in the patch https://reviews.llvm.org/D66969,
since implemented the function description. We can output the raw object data for function.
we need to create a test for raw text section content and test section header for xcoff object file.
Reviewer: daltenty,hubert.reinterpretcast,jasonliu
Differential Revision: https://reviews.llvm.org/D71845
David Green