systems. It has been available in the OS over over three years
now. If lldb doesn't link against -lcompression, it should be an
error.
Allocate a scratch buffer for libcompression to use when decoding
packets, instead of it having to allocate & free one on every call.
Fix a typeo with the size of the buffer that compression_decode_buffer()
is expanding into.
<rdar://problem/41601084>
llvm-svn: 349563
on Darwin systems and libcompression has been in the OS for over
three years.
Remove use of / linking to zlib. We'll always have libcompression
available now.
Create a scratch buffer via compression_encode_scratch_buffer_size()
and use it in calls to compression_encode_buffer() to avoid
compression_encode_buffer having to malloc & free a scratch buffer
on each call.
Tested by forcing compression to be enabled on macos native (normally
only enabled on iOS et al devices), running the testsuite.
<rdar://problem/41601084>
llvm-svn: 349553
As discussed on IRC this morning, when building an in-tree clang for
testing we have to have libcxx and libcxxabi checked out. This is a
common pitfall. Not only are the resulting failures non-obvious, they
only manifest when running the test suite, *after* building lldb and
clang. By making them a hard dependency (on macOS) we fail earlier with
a more useful error message.
Differential revision: https://reviews.llvm.org/D55837
llvm-svn: 349539
Summary:
GnuWin32 installs libxml2 2.4. This isn't recent enough for lldb's
usage and thus the build fails. Searching for libxml2 was disabled
due to this build failure.
However, the gdb-remote plugin requires libxml2 to parse various
gdb-remote protocol packets. Thus check and confirm that the libxml2
version is at least 2.8 and disable it if not.
Reviewers: compnerd, zturner
Reviewed By: compnerd
Subscribers: mgorny
Differential Revision: https://reviews.llvm.org/D55583
llvm-svn: 349538
Summary:
The first section header does not define a real section. Instead it is
used for various elf extensions. This patch skips creation of a section
for index 0.
This has one furtunate side-effect, in that it allows us to use the section
header index as the Section ID (where 0 is also invalid). This way, we
can get rid of a lot of spurious +1s in the ObjectFileELF code.
Reviewers: clayborg, krytarowski, joerg, espindola
Subscribers: emaste, lldb-commits, arichardson
Differential Revision: https://reviews.llvm.org/D55757
llvm-svn: 349498
the "self.assertEqual(thread.GetStopReason(), lldb.eStopReasonSignal)"
was occasionally failing because the stop reason would come out as
"trace" this happened if we issued the interrupt just as the processed
stopped due to single-stepping over the breakpoint (i.e., the it was not
necessary to send any signal).
Fix this by removing the breakpoint before resuming the process. This
ensures the process can run unobstructed.
After this, the test passed 200 consecutive runs successfully for me,
even while the system was under heavy load.
llvm-svn: 349491
This test was disabled in r326756 as a part of "upstreaming debugserver
support for AVX-512 (zmm register set)". This looks like an error
because both register set and remote stubs are different.
In any case, the test passes now.
llvm-svn: 349485
This test is passing now on linux. The same test is claimed to be flaky
on darwin, so it's possible that's true on linux too. If that's the case
we'll have to skip it here too (or fix it).
I mark the test as not-debug-info-dependent as a drive-by.
llvm-svn: 349482
These tests are now passing on linux, at least with top-of-tree clang,
clang-6 and gcc-7.3. It's possible it may still be failing with some
older compilers, but I don't have those around to test.
llvm-svn: 349478
Summary:
This should enable the compiler to find the system linker for the link
step.
Reviewers: stella.stamenova, zturner
Subscribers: lldb-commits
Differential Revision: https://reviews.llvm.org/D55736
llvm-svn: 349461
We need to ensure that Finalize gets called before we start
to destroy the old Process or the weak_ptr->shared_ptr link
from Threads to Target gets broken before the threads are
destroyed.
<rdar://problem/43586979>
Differential Revision: https://reviews.llvm.org/D55631
llvm-svn: 349435
Each process plug-in can create its own custom commands. I figured it would be nice to be able to dump things from the minidump file from the lldb command line, so I added the start of the some custom commands.
Currently you can dump:
minidump stream directory
all linux specifc streams, most of which are strings
each linux stream individually if desired, or all with --linux
The idea is we can expand the command set to dump more things, search for data in the core file, and much more. This patch gets us started.
Differential Revision: https://reviews.llvm.org/D55727
llvm-svn: 349429
present in the dSYM per-uuid plist, its precedence order with
the older DBGBuildSourcePath/DBGSourcePath, and note that
must be present and have a value of 3 or the dictionary
will be ignored.
<rdar://problem/46421686>
llvm-svn: 349409
make the executable name more unique.
This test is failing sporadically on some bots. By removing the sleep
synchronisation, I'm hoping to get it to fail more reproducibly so I
can investigate what is going on.
llvm-svn: 349397
Previously the code that parsed debug info to create lldb's Symbol
objects such as Variable, Type, Function, etc was tightly coupled
to the AST reconstruction code. This made it difficult / impossible
to implement functions such as ParseDeclsForContext() that were only
supposed to be operating on clang AST's. By splitting these apart,
the logic becomes much cleaner and we have a clear separation of
responsibilities.
llvm-svn: 349383
The --repl option was incorrectly defined as "Separate" (option and
value separated by a space). This resulted in the option not being
picked up when no value was specified.
This patch fixes the driver so that `--repl` is recognized again. I
split the option into two:
- A flag: `--repl` and `-r` which take no arguments.
- A joined option: `--repl=<flags>` and `-r=<flags>` that forward its
values to the repl.
This should match the driver's old behavior.
llvm-svn: 349371
This is a little dangerous since the crashlog files aren't 100%
unambiguous, but the risk is mitigated by using a non-greedy +?
pattern.
rdar://problem/38478511
Differential Revision: https://reviews.llvm.org/D55608
llvm-svn: 349367
Often users have a crash log an d a .dSYM bundle, but not the original
application binary. It turns out that for crash symbolication, we can
safely fall back to using the binary inside the .dSYM bundle.
Differential Revision: https://reviews.llvm.org/D55607
llvm-svn: 349366
The first one allows us to add an enumerator to an enum if we
already have an APSInt, since ultimately the implementation just
constructs one anyway. The second is just a general utility
function to covert a CompilerType to a clang::TagDecl.
llvm-svn: 349360
gdb-remote serial protocol documentation, call out the
incompatability of lldb's vFile:open: packet as it stands
today. Need to think about whether to change lldb's
enum values (breaking any existing lldb-server's out there)
or create a different packet and abandon vFile:open: at
least for a while.
llvm-svn: 349316
in the packet are lldb enum values, not the open(2) oflags --
forgot about that wrinkle. Also added a comment to File.h
noting that the existing values cannot be modified or we'll
have a compatibilty break with any alternative platform
implementations, or older versions of lldb-server.
llvm-svn: 349282
Summary:
Previously lldb-test's LinePrinter would output the indentation spaces
even on completely empty lines. This is not nice, as trailing spaces get
flagged as errors in some tools/editors, and it prevents FileCheck's
CHECK-EMPTY from working.
Equally annoying was the fact that the LinePrinter did not terminate
it's output with a newline (instead it would leave the unterminated hanging
indent from the last NewLine() command), which meant that the shell prompt
following the lldb-test command came out wrong.
This fixes both issues by changing how newlines are handled. NewLine(),
which was ending the previous line ('\n') *and* begging the next line by
printing the indent, is now "demoted" to just printing literal "\n".
Instead, lines are now delimited via a helper Line object, which makes
sure the line is indented and terminated in an RAII fashion. The typical
usage would be:
Printer.line() << "This text will be indented and terminated";
If one needs to do more work than it will fit into a single statement,
one can also assign the result of the line() function to a local
variable. The line will then be terminated when that object goes out of
scope.
Reviewers: zturner
Subscribers: lldb-commits
Differential Revision: https://reviews.llvm.org/D55597
llvm-svn: 349269
Summary:
This patch attempts to move as much code as possible out of the
CreateSections function to make room for future improvements there. Some
of this may be slightly over-engineered (VMAddressProvider), but I
wanted to keep the logic of this function very simple, because once I
start taking segment headers into acount (as discussed in D55356), the
function is going to grow significantly.
While in there, I also added tests for various bits of functionality.
This should be NFC, except that I changed the order of hac^H^Heuristicks
for determining section type slightly. Previously, name-based deduction
(.symtab -> symtab) would take precedence over type-based (SHT_SYMTAB ->
symtab) one. In fact we would assert if we ran into a .text section with
type SHT_SYMTAB. Though unlikely to matter in practice, this order
seemed wrong to me, so I have inverted it.
Reviewers: clayborg, krytarowski, espindola
Subscribers: emaste, arichardson, lldb-commits
Differential Revision: https://reviews.llvm.org/D55706
llvm-svn: 349268
to write an lldb platform server that doesn't link against
LLDB.framework to be able to fully run the lldb testsuite
on a remote system. The platform packets weren't covered
in the existing lldb-gdb-remote.txt doc, so I wanted to
jot them down in one place.
llvm-svn: 349231
This patch simplifies boolean expressions acorss LLDB. It was generated
using clang-tidy with the following command:
run-clang-tidy.py -checks='-*,readability-simplify-boolean-expr' -format -fix $PWD
Differential revision: https://reviews.llvm.org/D55584
llvm-svn: 349215
While I was out hunting for remaining pexpect-based tests, I came
across these tests that can't possibly work an any modern system, as
they rely on having gdb available in /Developer.
This patch simply removes the test without replacement.
Differential Revision: https://reviews.llvm.org/D55559
llvm-svn: 349194
Breakpad creates minidump files that sometimes have:
- linux maps textual content
- no MemoryInfoList
Right now unless the file has a MemoryInfoList we get no region information.
This patch:
- reads and caches the memory region info one time and sorts it for easy subsequent access
- get the region info from the best source in this order:
- linux maps info (if available)
- MemoryInfoList (if available)
- MemoryList or Memory64List
- returns memory region info for the gaps between regions (before the first and after the last)
Differential Revision: https://reviews.llvm.org/D55522
llvm-svn: 349182
Since we're actually running an executable on the host now, different
versions of Windows could load different system libraries, so we need
to regex out the number of loaded modules.
llvm-svn: 349175
Summary:
These are general purpose "utility" classes, whose functionality is not
debugger-specific in any way. As such, I believe they belong in the
Utility module.
This doesn't break any particular dependency (yet), but it reduces the
number of Core dependencies across the board.
Reviewers: zturner, jingham, teemperor, clayborg
Subscribers: mgorny, lldb-commits
Differential Revision: https://reviews.llvm.org/D55361
llvm-svn: 349157
This commit added new test inputs, but it did not add them to the cmake
files. This caused the test to fail at runtime.
While in there, I also sorted the list of minidump test inputs.
llvm-svn: 349154
It turns out it wasn't the compilers, but swig who had issues with my
previous patch -- older versions do not recognise the "constexpr"
keyword.
Fortunately, that can be fixed the same way we fix all other swig
incompatibilities: #ifndef SWIG.
llvm-svn: 349153
this allows one to use bitwise operators on the variables of this type
without complicated casting.
The gotcha here is that the combinations of these enums were being used
in some constexpr contexts such as case labels (case
ePermissionsWritable | ePermissionsExecutable:), which is not possible
if the user-defined operator| is not constexpr.
So, this commit also marks these operators as constexpr. I am committing
this as a small standalone patch so it can be easily reverted if some
compiler has an issue with this.
llvm-svn: 349149
This patch adds support for parsing and evaluating local variables.
using the native pdb plugin.
Differential Revision: https://reviews.llvm.org/D55575
llvm-svn: 349067
The MinidumpParser::GetFilteredModuleList() code was attempting to iterate through the entire module list and if it found more than one entry for a given module name, it wanted to pick the MinidumpModule with the lowest address. A bug existed where it wasn't doing that due to "exists" variable being inverted. "exists" was set to true if it was inserted, not if it existed. Furthermore, the order of the modules would be modified by sorting all modules from low address to high address (using MinidumpModule::base_of_image). This fix also maintains the original order which means your executable is at index 0 as intended instead of some random shared library.
Tests were added to ensure this functionality doesn't regress.
Differential Revision: https://reviews.llvm.org/D55614
llvm-svn: 349062
We've recently developed a convention where the tests are placed into
subfolders according to the object file type. This applies that
convention to existing tests too.
llvm-svn: 349027
Previously CreateParameterDeclaration was always using the translation
unit DeclContext. We would later go and add parameters to the
FunctionDecl, but internally clang makes a copy when you do this, and
we'd end up with ParmVarDecl's at the global scope as well as in the
function scope.
This fixes the issue. It's hard to say whether this will introduce
a behavioral change in name lookup, but I know there have been several
hacks introduced in previous years to deal with collisions between
various types of variables, so there's a chance that this patch could
obviate one of those hacks.
Differential Revision: https://reviews.llvm.org/D55571
llvm-svn: 348941
Move code into a separate function, and replace the if-else chain with
llvm::StringSwitch.
A slight behavioral change is that now I use the section flags
(SHF_TLS) instead of the section name to set the thread-specific
property. There is no explanation in the original commit introducing
this (r153537) as to why that was done this way, but the new behavior
should be more correct.
llvm-svn: 348936
Instead of GetProgramHeaderCount+GetProgramHeaderByIndex, expose an
ArrayRef of all program headers, to enable range-based iteration.
Instead of GetSegmentDataByIndex, expose GetSegmentData, taking a
program header (reference).
This makes the code simpler by enabling range-based loops and also
allowed to remove some null checks, as it became locally obvious that
some pointers can never be null.
llvm-svn: 348928
Previously, lldb-test would only print top-level sections. However, in
lldb, sections can contain other sections. This teaches lldb-test to
print nested sections too.
llvm-svn: 348924
Summary:
This implements the gcc builder in build.py script to allow it to
compile host executables when running on a non-windows host. Where it
made sense, I tried to share code with the msvc builder by moving stuff
to the base class.
Reviewers: zturner
Subscribers: mehdi_amini, dexonsmith, lldb-commits
Differential Revision: https://reviews.llvm.org/D55430
llvm-svn: 348918
Hopefully this makes the option data easier to understand and maintain.
- Group the member variables.
- Do the initialization in the header as it's less error prone.
- Rename the Clean method. It was called only once and was
re-initializing some but not all (?) members. The only useful thing it
does is dealing with the local lldbinit file so keep that and make the
name reflect that.
llvm-svn: 348894
Summary:
This function was named such because in the case of MachO files, the
mach header is located at this address. However all (most?) usages of
this function were not interested in that fact, but the fact that this
address is used as the base address for expressing various relative
addresses in the object file.
For other object file formats, this name is not appropriate (and it's
probably the reason why this function was not implemented in these
classes). In the ELF case the ELF header will usually end up at this
address, but this is a result of the linker optimizing the file layout
and not a requirement of the spec. For COFF files, I believe the is no
header located at this address either.
Reviewers: clayborg, jasonmolenda, amccarth, lemo, stella.stamenova
Subscribers: lldb-commits
Differential Revision: https://reviews.llvm.org/D55422
llvm-svn: 348849
m_loc_is_constant_data was uninitialized, so unless someone
explicitly called SetLocIsConstantData(), this would be UB.
I think every existing call-site would always call the proper
function to initialize the value, so there were no existing
bugs, but I encountered this when I tried to use it without
calling this function and encountered this.
llvm-svn: 348813
Summary: Instead use a more reasonable value to start and rely on the fact that SmallString will resize if necessary.
Reviewers: labath, asmith
Reviewed By: labath
Subscribers: lldb-commits
Differential Revision: https://reviews.llvm.org/D55457
llvm-svn: 348775
This re-commits r348592, which was reverted due to a failing test on
macos.
The issue was that I was passing a null pointer for the
"CreateMemoryInstance" callback when registering ObjectFileBreakpad,
which caused crashes when attemping to load modules from memory. The
correct thing to do is to pass a callback which always returns a null
pointer (as breakpad files are never loaded in inferior memory).
It turns out that there is only one test which exercises this code path,
and it's mac-only, so I've create a new test which should run everywhere
(except windows, as one cannot delete an executable which is being run).
Unfortunately, this test still fails on linux for other reasons, but at
least it gives us something to aim for.
The original commit message was:
This patch adds the scaffolding necessary for lldb to recognise symbol
files generated by breakpad. These (textual) files contain just enough
information to be able to produce a backtrace from a crash
dump. This information includes:
- UUID, architecture and name of the module
- line tables
- list of symbols
- unwind information
A minimal breakpad file could look like this:
MODULE Linux x86_64 0000000024B5D199F0F766FFFFFF5DC30 a.out
INFO CODE_ID 00000000B52499D1F0F766FFFFFF5DC3
FILE 0 /tmp/a.c
FUNC 1010 10 0 _start
1010 4 4 0
1014 5 5 0
1019 5 6 0
101e 2 7 0
PUBLIC 1010 0 _start
STACK CFI INIT 1010 10 .cfa: $rsp 8 + .ra: .cfa -8 + ^
STACK CFI 1011 $rbp: .cfa -16 + ^ .cfa: $rsp 16 +
STACK CFI 1014 .cfa: $rbp 16 +
Even though this data would normally be considered "symbol" information,
in the current lldb infrastructure it is assumed every SymbolFile object
is backed by an ObjectFile instance. So, in order to better interoperate
with the rest of the code (particularly symbol vendors).
In this patch I just parse the breakpad header, which is enough to
populate the UUID and architecture fields of the ObjectFile interface.
The rough plan for followup patches is to expose the individual parts of
the breakpad file as ObjectFile "sections", which can then be used by
other parts of the codebase (SymbolFileBreakpad ?) to vend the necessary
information.
Reviewers: clayborg, zturner, lemo, amccarth
Subscribers: mgorny, fedor.sergeev, markmentovai, lldb-commits
Differential Revision: https://reviews.llvm.org/D55214
llvm-svn: 348773
The test still only passes when not run from VS because the previous patch did not remove the original build commands.... This also simplifies the build command by removing some defaults
llvm-svn: 348664
Previously we would create an lldb::Function object for each function
parsed, but we would not add these to the clang AST. This is a first
step towards getting local variable support working, as we first need an
AST decl so that when we create local variable entries, they have the
proper DeclContext.
Differential Revision: https://reviews.llvm.org/D55384
llvm-svn: 348631
Summary:
This patch adds the scaffolding necessary for lldb to recognise symbol
files generated by breakpad. These (textual) files contain just enough
information to be able to produce a backtrace from a crash
dump. This information includes:
- UUID, architecture and name of the module
- line tables
- list of symbols
- unwind information
A minimal breakpad file could look like this:
MODULE Linux x86_64 0000000024B5D199F0F766FFFFFF5DC30 a.out
INFO CODE_ID 00000000B52499D1F0F766FFFFFF5DC3
FILE 0 /tmp/a.c
FUNC 1010 10 0 _start
1010 4 4 0
1014 5 5 0
1019 5 6 0
101e 2 7 0
PUBLIC 1010 0 _start
STACK CFI INIT 1010 10 .cfa: $rsp 8 + .ra: .cfa -8 + ^
STACK CFI 1011 $rbp: .cfa -16 + ^ .cfa: $rsp 16 +
STACK CFI 1014 .cfa: $rbp 16 +
Even though this data would normally be considered "symbol" information,
in the current lldb infrastructure it is assumed every SymbolFile object
is backed by an ObjectFile instance. So, in order to better interoperate
with the rest of the code (particularly symbol vendors).
In this patch I just parse the breakpad header, which is enough to
populate the UUID and architecture fields of the ObjectFile interface.
The rough plan for followup patches is to expose the individual parts of
the breakpad file as ObjectFile "sections", which can then be used by
other parts of the codebase (SymbolFileBreakpad ?) to vend the necessary
information.
Reviewers: clayborg, zturner, lemo, amccarth
Subscribers: mgorny, fedor.sergeev, markmentovai, lldb-commits
Differential Revision: https://reviews.llvm.org/D55214
llvm-svn: 348592
And mark it as a public header so it will get copied
into the LLDB.framework. A handful of "api" tests were
failing because they couldn't find this file.
llvm-svn: 348561
in one packet from 1k bytes to 16k bytes. Sending a large file to an
iOS device directly connected by USB cable, to lldb-server running in
platform mode, this speeds up the file xfer by 77%. Sending the file
in 32k blocks speeds up the file xfer by 80% versus 1k blocks, starting
with 16k to make sure we don't have any problems with android testing.
We may not have the same perf characteristics over ethernet, but with
USB it's faster to send fewer larger packets than many small packets.
llvm-svn: 348557
Windows provides a Yield function-like macro that allows a thread to
yield the CPU. However, this conflicts with `Yield` in swift. Undefine
`Yield` to allow building lldb with swift support.
llvm-svn: 348556
Summary:
This parses entries in pecoff import tables for imported DLLs and
is intended as the first step to allow LLDB to load a PE's shared
modules when creating a target on the LLDB console.
Reviewers: rnk, zturner, aleksandr.urakov, lldb-commits, labath, asmith
Reviewed By: labath, asmith
Subscribers: labath, lemo, clayborg, Hui, mgorny, mgrang, teemperor
Differential Revision: https://reviews.llvm.org/D53094
llvm-svn: 348527
Summary:
Windows lldb debugging currently uses a process plugin to handle
launching and attaching to a process. Launching a process via a debug
server (e.g. ds2) and attaching to it with `gdb-remote port` currently
doesn't communicate address information of the executable properly.
Implement DynamicLoaderWindowsDYLD::DidAttach which allow us to
obtain the proper executable load address.
Differential Revision: https://reviews.llvm.org/D55383
llvm-svn: 348526
In compile-and-link mode, the user doesn't specify the name of the
object files to generate, because there could be multiple inputs
on a single command line and this would be hard to specify. So the
script just tries to be smart and figure out the best object file
names. However, if two build scripts are running in parallel and
using the same source files as input, they would previously race
to write the same object files, since the computed name only considered
the source file names when computing the object file names.
With this patch, we also consider the final executable name. In a
way, this "namespaces" the generated object files so that as long
as the final executable file names don't clash, the intermediate
object file names won't clash either.
llvm-svn: 348511
VarStreamArray was built on the assumption that it is backed by a
StreamRef, and offset 0 of that StreamRef is the first byte of the first
record in the array.
This is a logical and intuitive assumption, but unfortunately we have
use cases where it doesn't hold. Specifically, a PDB module's symbol
stream is prefixed by 4 bytes containing a magic value, and the first
byte of record data in the array is actually at offset 4 of this byte
sequence.
Previously, we would just truncate the first 4 bytes and then construct
the VarStreamArray with the resulting StreamRef, so that offset 0 of the
underlying stream did correspond to the first byte of the first record,
but this is problematic, because symbol records reference other symbol
records by the absolute offset including that initial magic 4 bytes. So
if another record wants to refer to the first record in the array, it
would say "the record at offset 4".
This led to extremely confusing hacks and semantics in loading code, and
after spending 30 minutes trying to get some math right and failing, I
decided to fix this in the underlying implementation of VarStreamArray.
Now, we can say that a stream is skewed by a particular amount. This
way, when we access a record by absolute offset, we can use the same
values that the records themselves contain, instead of having to do
fixups.
Differential Revision: https://reviews.llvm.org/D55344
llvm-svn: 348499
When building with MSVC, the type `Module` is ambiguous due to both the
lldb_private and llvm namespaces being used. Use the elaborated type
instead to resolve the ambiguity.
llvm-svn: 348332
This makes -mode=compile support multiple inputs (and hence
multiple outputs).
It also makes the value of -arch for compiling inferiors default
to the architecture that LLDB is built in. This can still be
overridden however.
Differential Revision: https://reviews.llvm.org/D55230
llvm-svn: 348305
As Pavel noted on the mailing list we should only create the bottom-most
directory if it doesn't exist. This should also fix the test case on
Windows as we can use lit's temp directory.
llvm-svn: 348289
Summary:
r348240 assumes that an expression contains the Objective C option if
Objective C Runtime is found. But on MacOS X it seems that the test application
process always contains Objective C Runtime, so the test fails when it assumes
that the language is C++ only. Skip this part on Darwin.
llvm-svn: 348250
Summary:
This patch adds the check of the language before ignoring names like `id` or
`Class`, which are reserved in Objective C, but are allowed in C++. It is needed
to make it possible to evaluate expressions in a C++ program containing names
like `id` or `Class`.
Reviewers: jingham, zturner, labath, clayborg
Reviewed By: jingham, clayborg
Tags: #lldb
Differential Revision: https://reviews.llvm.org/D54843
llvm-svn: 348240
This patch changes the way the reproducer is initialized. Rather than
making changes at run time we now do everything at initialization time.
To make this happen we had to introduce initializer options and their SB
variant. This allows us to tell the initializer that we're running in
reproducer capture/replay mode.
Because of this change we also had to alter our testing strategy. We
cannot reinitialize LLDB when using the dotest infrastructure. Instead
we use lit and invoke two instances of the driver.
Another consequence is that we can no longer enable capture or replay
through commands. This was bound to go away form the beginning, but I
had something in mind where you could enable/disable specific providers.
However this seems like it adds very little value right now so the
corresponding commands were removed.
Finally this change also means you now have to control this through the
driver, for which I replaced --reproducer with --capture and --replay to
differentiate between the two modes.
Differential revision: https://reviews.llvm.org/D55038
llvm-svn: 348152
Summary:
This patch contains several small fixes, which makes it possible to evaluate
expressions on Windows using information from PDB. The changes are:
- several sanitize checks;
- make IRExecutionUnit::MemoryManager::getSymbolAddress to not return a magic
value on a failure, because callers wait 0 in this case;
- entry point required to be a file address, not RVA, in the ObjectFilePECOFF;
- do not crash on a debuggee second chance exception - it may be an expression
evaluation crash. Also fix detection of "crushed" threads in tests;
- create parameter declarations for functions in AST to make it possible to call
debugee functions from expressions;
- relax name searching rules for variables, functions, namespaces and types. Now
it works just like in the DWARF plugin;
- fix endless recursion in SymbolFilePDB::ParseCompileUnitFunctionForPDBFunc.
Reviewers: zturner, asmith, stella.stamenova
Reviewed By: stella.stamenova, asmith
Tags: #lldb
Differential Revision: https://reviews.llvm.org/D53759
llvm-svn: 348136
This adds a script called build.py as well as a lit substitution
called %build that we can use to invoke it. The idea is that
this allows a lit test to build test inferiors without having
to worry about architecture / platform specific differences,
command line syntax, finding / configurationg a proper toolchain,
and other issues. They can simply write something like:
%build --arch=32 -o %t.exe %p/Inputs/foo.cpp
and it will just work. This paves the way for being able to
run lit tests with multiple configurations, platforms, and
compilers with a single test.
Differential Revision: https://reviews.llvm.org/D54914
llvm-svn: 348058
1. In ProcessWindows if we fail to allocate memory, we need to return LLDB_INVALID_ADDRESS rather than 0 or nullptr as that is the invalid address that LLDB looks for
2. In RegisterContextWindows in ReadAllRegisterValues, always create a new buffer. This is what the other platforms do and data_sp is always null in all tested scenarios on Windows as well
llvm-svn: 348055
The test assumes that HW breakpoints are not implemented by the debug
server. Windows doesn't use these and might actually support HW
breakpoints so these tests are expected fail because they don't raise
the expected error.
llvm-svn: 348010
This reverts commit dec87759523b2f22fcff3325bc2cd543e4cda0e7.
This commit caused the tests on Windows to run forever rather than complete.
Reverting until the commit can be fixed to not stall.
llvm-svn: 348009
Summary:
This patch fixes the next situation. On Windows clang-cl makes no stub before
the main function, so the main function is located exactly on module entry
point. May be it is the same on other platforms. So consider the following
sequence:
- set a breakpoint on main and stop there;
- try to evaluate expression, which requires a code execution on the debuggee
side. Such an execution always returns to the module entry, and the plan waits
for it there;
- the plan understands that it is complete now and removes its breakpoint. But
the breakpoint site is still there, because we also have a breakpoint on
entry;
- StopInfo analyzes a situation. It sees that we have stopped on the breakpoint
site, and it sees that the breakpoint site has owners, and no one logical
breakpoint is internal (because the plan is already completed and it have
removed its breakpoint);
- StopInfo thinks that it's a user breakpoint and skips it to avoid recursive
computations;
- the program continues.
So in this situation the program continues without a stop right after
the expression evaluation. To avoid this an additional check that
the plan was completed was added.
Reviewers: jingham, zturner, boris.ulasevich
Reviewed by: jingham
Tags: #lldb
Differential Revision: https://reviews.llvm.org/D53761
llvm-svn: 347974
Summary:
This patch contains several small fixes, which makes it possible to evaluate
expressions on Windows using information from PDB. The changes are:
- several sanitize checks;
- make IRExecutionUnit::MemoryManager::getSymbolAddress to not return a magic
value on a failure, because callers wait 0 in this case;
- entry point required to be a file address, not RVA, in the ObjectFilePECOFF;
- do not crash on a debuggee second chance exception - it may be an expression
evaluation crash;
- create parameter declarations for functions in AST to make it possible to call
debugee functions from expressions;
- relax name searching rules for variables, functions, namespaces and types. Now
it works just like in the DWARF plugin;
- fix endless recursion in SymbolFilePDB::ParseCompileUnitFunctionForPDBFunc.
Reviewers: zturner, asmith, stella.stamenova
Reviewed By: stella.stamenova, asmith
Tags: #lldb
Differential Revision: https://reviews.llvm.org/D53759
llvm-svn: 347962
Summary:
This patch adds possibility of searching a public symbol with name and type in
a symbol file, not only in a symtab. It is helpful when working with PE, because
PE's symtabs contain only imported / exported symbols only. Such a search is
required for e.g. evaluation of an expression that calls some function of
the debuggee.
Reviewers: zturner, asmith, labath, clayborg, espindola
Reviewed By: clayborg
Subscribers: davide, emaste, arichardson, aleksandr.urakov, jingham,
lldb-commits, stella.stamenova
Tags: #lldb
Differential Revision: https://reviews.llvm.org/D53368
llvm-svn: 347960
Apparently LLVM's libSupport depends on libDemangle to print the stack
trace. I'm not sure if this is desired but for now we don't have much
choice if we want to turn to bot green again.
llvm-svn: 347952
This fixes the driver with the Xcode project. We need to link the driver
against the correct LLVM libraries and make sure we're disabling
exceptions/rtti.
Thanks to Jim for helping me figure this out.
llvm-svn: 347936
Earlier this month there was a change in clang that defaulted to using codeview rather than dwarf on Windows. Since all the tests rely on dwarf, we need to explicitly request dwarf when building on Windows.
llvm-svn: 347924
A skeleton compilation unit may contain the DW_AT_str_offsets_base attribute
that points to the first string offset of the CU contribution to the
.debug_str_offsets. At the same time, when we use split dwarf,
the corresponding split debug unit also
may use DW_FORM_strx* forms pointing to its own .debug_str_offsets.dwo.
In that case, DWO does not contain DW_AT_str_offsets_base, but LLDB
still need to know and skip the .debug_str_offsets.dwo section header to
access the offsets.
The patch implements the support of DW_AT_str_offsets_base.
Differential revision: https://reviews.llvm.org/D54844
llvm-svn: 347859
The changed order of includes caused compile errors on MSVC due to
snprintf macro definition. snprintf should available since VS2015, and
the rest of the code seems to be able to use snprintf just fine without
this macro, so this removes it from the lldb driver as well.
llvm-svn: 347855
They are not needed now that we use LLVMOption for command-line parsing
thank you, Jonas). This also allows us to avoid linking of lldbHost
into the driver which was breaking liblldb encapsulation.
(Technically, there is still a lldb/Host/windows/windows.h include which
is needed on windows, but this is a header-only wrapper for <windows.h>,
so it is not necessary to link lldbHost for that. But ideally, that
should go away too.)
llvm-svn: 347846
The issue happens because starting from DWARF v5
DW_AT_addr_base attribute should be used
instead of DW_AT_GNU_addr_base. LLDB does not do that and
we end up reading the .debug_addr header as section content
(as addresses) instead of skipping it and reading the real addresses.
Then LLDB is unable to match 2 similar locations and
thinks they are different.
Differential revision: https://reviews.llvm.org/D54751
llvm-svn: 347842
Because the optarg variable was shadowed we didn't notice we weren't
extracting the value from the option. This patch fixes that and renames
the variable to prevent this from happening in the future.
I also added two tests to check the error output for --core and --file
when the given value doesn't exist.
llvm-svn: 347821
This adds new APIs and a command to deal with exceptions (mostly Obj-C exceptions): SBThread and Thread get GetCurrentException API, which returns an SBValue/ValueObjectSP with the current exception for a thread. "Current" means an exception that is currently being thrown, caught or otherwise processed. In this patch, we only know about the exception when in objc_exception_throw, but subsequent patches will expand this (and add GetCurrentExceptionBacktrace, which will return an SBThread/ThreadSP containing a historical thread backtrace retrieved from the exception object. Currently unimplemented, subsequent patches will implement this).
Extracting the exception from objc_exception_throw is implemented by adding a frame recognizer.
This also add a new sub-command "thread exception", which prints the current exception.
Differential Revision: https://reviews.llvm.org/D43886
llvm-svn: 347813
Two of the file system tests are failing on Windows - this updates them to expect the correct values after the refactor of the file system code.
llvm-svn: 347796
A couple of new tests have been added that use existing class names. This causes failures on Windows if the tests run at the same time and on any platform it results in the logs being overwritten.
llvm-svn: 347717
When I landed the initial reproducer framework I knew there were some
things that needed improvement. Rather than bundling it with a patch
that adds more functionality I split it off into this patch. I also
think the API is stable enough to add unit testing, which is included in
this patch as well.
Other improvements include:
- Refactor how we initialize the loader and generator.
- Improve naming consistency: capture and replay seems the least ambiguous.
- Index providers by name and make sure there's only one of each.
- Add convenience methods for creating and accessing providers.
Differential revision: https://reviews.llvm.org/D54616
llvm-svn: 347716
On Windows, when using the VFS without going through FileSpec, the
absolute path to `/foo` is `\\foo`. This updates the unittest to expect
that.
llvm-svn: 347712
Jason Molenda