The motivating case for this is shown in:
https://bugs.llvm.org/show_bug.cgi?id=32023
and the corresponding rot16.ll regression tests.
Because x86 scalar shift amounts are i8 values, we can end up with trunc-binop-trunc
sequences that don't get folded in IR.
As the TODO comments suggest, there will be regressions if we extend this (for x86,
we mostly seem to be missing LEA opportunities, but there are likely vector folds
missing too). I think those should be considered existing bugs because this is the
same transform that we do as an IR canonicalization in instcombine. We just need
more tests to make those visible independent of this patch.
Differential Revision: https://reviews.llvm.org/D54640
llvm-svn: 347917
I believe we should be legalizing these with the rest of vector binary operations. If any custom lowering is required for these nodes, this will give the DAG combine between LegalizeVectorOps and LegalizeDAG to run on the custom code before constant build_vectors are lowered in LegalizeDAG.
I've moved MULHU/MULHS handling in AArch64 from Lowering to isel. Moving the lowering earlier caused build_vector+extract_subvector simplifications to kick in which made the generated code worse.
Differential Revision: https://reviews.llvm.org/D54276
llvm-svn: 347902
SplitVecOp_TruncateHelper tries to promote the result type while splitting FP_TO_SINT/UINT. It then concatenates the result and introduces a truncate to the original result type. But it does this without inserting the AssertZExt/AssertSExt that the regular result type promotion would insert. Nor does it turn FP_TO_UINT into FP_TO_SINT the way normal result type promotion for these operations does. This is bad on X86 which doesn't support FP_TO_SINT until AVX512.
This patch disables the use of SplitVecOp_TruncateHelper for these operations and just lets normal promotion handle it. I've tweaked a couple things in X86ISelLowering to avoid a few obvious regressions there. I believe all the changes on X86 are improvements. The other targets look neutral.
Differential Revision: https://reviews.llvm.org/D54906
llvm-svn: 347593
We might find a target specific node that needs to be unwrapped after we look through an add/or. Otherwise we get inconsistent results if one pointer is just X86WrapperRIP and the other is (add X86WrapperRIP, C)
Differential Revision: https://reviews.llvm.org/D54818
llvm-svn: 347591
This should likely be adjusted to limit this transform
further, but these diffs should be clear wins.
If we have blendv/conditional move, then we should assume
those are cheap ops. The loads become independent of the
compare, so those can be speculated before we need to use
the values in the blend/mov.
llvm-svn: 347526
rL347502 moved the null sibling, so we should group all of these
together. I'm not sure why these aren't methods of the SDValue
class itself, but that's another patch if that's possible.
llvm-svn: 347523
...and use them to avoid creating obviously undef values as
discussed in the post-commit thread for r347478.
The diffs in vector div/rem show that we were missing real
optimizations by creating bogus shift nodes.
llvm-svn: 347502
This code takes a truncate, fp_to_int, or int_to_fp with a legal result type and an input type that needs to be split and enlarges the elements in the result type before doing the split. Then inserts a follow up truncate or fp_round after concatenating the two halves back together.
But if the input type of the original op is being split on its way to ultimately being scalarized we're just going to end up building a vector from scalars and then truncating or rounding it in the vector register. Seems kind of silly to enlarge the result element type of the operation only to end up with scalar code and then building a vector with large elements only to make the elements smaller again in the vector register. Seems better to just try to get away producing smaller result types in the scalarized code.
The X86 test case that changes is a pretty contrived test case that exists because of a bug we used to have in our AVG matching code. I think the code is better now, but its not realistic anyway.
llvm-svn: 347482
SplitVecOp_TruncateHelper tries to introduce a multilevel truncate to avoid scalarization. But if splitting the result type would still be a legal type we don't need to do that.
The comment block at the top of the function implied that this was already implemented. I looked back through the history and it doesn't look to have ever been checked.
llvm-svn: 347479
We fail to canonicalize IR this way (prefer 'not' ops to arbitrary 'xor'),
but that would not matter without this patch because DAGCombiner was
reversing that transform. I think we need this transform in the backend
regardless of what happens in IR to catch cases where the shift-xor
is formed late from GEP or other ops.
https://rise4fun.com/Alive/NC1
Name: shl
Pre: (-1 << C2) == C1
%shl = shl i8 %x, C2
%r = xor i8 %shl, C1
=>
%not = xor i8 %x, -1
%r = shl i8 %not, C2
Name: shr
Pre: (-1 u>> C2) == C1
%sh = lshr i8 %x, C2
%r = xor i8 %sh, C1
=>
%not = xor i8 %x, -1
%r = lshr i8 %not, C2
https://bugs.llvm.org/show_bug.cgi?id=39657
llvm-svn: 347478
This transform needs to be limited.
We are converting to a constant pool load very early, and we
are turning loads that are independent of the select condition
(and therefore speculatable) into a dependent non-speculatable
load.
We may also be transferring a condition code from an FP register
to integer to create that dependent load.
llvm-svn: 347424
This is another step in vector narrowing - a follow-up to D53784
(and hoping to eventually squash potential regressions seen in
D51553).
The x86 test diffs are wins, but the AArch64 diff is probably not.
That problem already exists independent of this patch (see PR39722), but it
went unnoticed in the previous patch because there were no regression tests
that showed the possibility.
The x86 diff in i64-mem-copy.ll is close. Given the frequency throttling
concerns with using wider vector ops, an extra extract to reduce vector
width is the right trade-off at this level of codegen.
Differential Revision: https://reviews.llvm.org/D54392
llvm-svn: 347356
This uncovered an off-by-one typo in SimplifyDemandedVectorElts's INSERT_SUBVECTOR handling as its bounds check was bailing on safe indices.
llvm-svn: 347313
For bitcast nodes from larger element types, add the ability for SimplifyDemandedVectorElts to call SimplifyDemandedBits by merging the elts mask to a bits mask.
I've raised https://bugs.llvm.org/show_bug.cgi?id=39689 to deal with the few places where SimplifyDemandedBits's lack of vector handling is a problem.
Differential Revision: https://reviews.llvm.org/D54679
llvm-svn: 347301
Summary:
We already support this for scalars, but it was explicitly disabled for vectors. In the updated test cases this allows us to see the upper bits are zero to use less multiply instructions to emulate a 64 bit multiply.
This should help with this ispc issue that a coworker pointed me to https://github.com/ispc/ispc/issues/1362
Reviewers: spatel, efriedma, RKSimon, arsenm
Reviewed By: spatel
Subscribers: wdng, llvm-commits
Differential Revision: https://reviews.llvm.org/D54725
llvm-svn: 347287
Consistently use (!LegalOperations || isOperationLegalOrCustom) for all node pairs.
Differential Revision: https://reviews.llvm.org/D53478
llvm-svn: 347255
As discussed on D53794, for float types with ranges smaller than the destination integer type, then we should be able to just use a regular FP_TO_SINT opcode.
I thought we'd need to provide MSA test cases for very small integer types as well (fp16 -> i8 etc.), but it turns out that promotion will kick in so they're unnecessary.
Differential Revision: https://reviews.llvm.org/D54703
llvm-svn: 347251
Sadly, this duplicates (twice) the logic from InstSimplify. There
might be some way to at least share the DAG versions of the code,
but copying the folds seems to be the standard method to ensure
that we don't miss these folds.
Unlike in IR, we don't run DAGCombiner to fixpoint, so there's no
way to ensure that we do these kinds of simplifications unless the
code is repeated at node creation time and during combines.
There were other tests that would become worthless with this
improvement that I changed as pre-commits:
rL347161
rL347164
rL347165
rL347166
rL347167
I'm not sure how to salvage the remaining tests (diffs in this patch).
So the x86 tests verify that the new code is working as intended.
The AMDGPU test is actually similar to my motivating case: we have
some undef value that has survived to machine IR in an x86 test, and
then it gets folded in some weird way, or we crash if we don't transfer
the undef flag. But we would have been better off never getting to that
point by doing these simplifications.
This will lead back to PR32023 someday...
https://bugs.llvm.org/show_bug.cgi?id=32023
llvm-svn: 347170
For example, on X86 we emit a sign_extend_vector_inreg from LowerLoad and without sse4.1 this node will need further legalization. Previously this sign_extend_vector_inreg was being custom lowered during DAG legalization instead of vector op legalization.
Unfortunately, this doesn't seem to matter for the output of any existing lit tests.
llvm-svn: 347094
Legalizer used to request an ext load from i8 to i1 when promoting
vector element type to i8. Fixed.
Differential Revision: https://reviews.llvm.org/D54440
llvm-svn: 346795
Previously, the extend_vector_inreg opcode required their input register to be the same total width as their output. But this doesn't match up with how the X86 instructions are defined. For X86 the input just needs to be a legal type with at least enough elements to cover the output.
This patch weakens the check on these nodes and allows them to be used as long as they have more input elements than output elements. I haven't changed type legalization behavior so it will still create them with matching input and output sizes.
X86 will custom legalize these nodes by shrinking the input to be a 128 bit vector and once we've done that we treat them as legal operations. We still have one case during type legalization where we must custom handle v64i8 on avx512f targets without avx512bw where v64i8 isn't a legal type. In this case we will custom type legalize to a *extend_vector_inreg with a v16i8 input. After that the input is a legal type so type legalization should ignore the node and doesn't need to know about the relaxed restriction. We are no longer allowed to use the default expansion for these nodes during vector op legalization since the default expansion uses a shuffle which required the widths to match. Custom legalization for all types will prevent us from reaching the default expansion code.
I believe DAG combine works correctly with the released restriction because it doesn't check the number of input elements.
The rest of the patch is changing X86 to use either the vector_inreg nodes or the regular zero_extend/sign_extend nodes. I had to add additional isel patterns to handle any_extend during isel since simplifydemandedbits can create them at any time so we can't legalize to zero_extend before isel. We don't yet create any_extend_vector_inreg in simplifydemandedbits.
Differential Revision: https://reviews.llvm.org/D54346
llvm-svn: 346784
The IEEE-754 Standard makes it clear that fneg(x) and
fsub(-0.0, x) are two different operations. The former is a bitwise
operation, while the latter is an arithmetic operation. This patch
creates a dedicated FNeg IR Instruction to model that behavior.
Differential Revision: https://reviews.llvm.org/D53877
llvm-svn: 346774
It should be ok to create a new build_vector after legal operations so long as it doesn't cause an infinite loop in DAG combiner.
Unfortunately, X86's custom constant folding in combineVSZext is hiding any test changes from this. But I'm trying to get to a point where that X86 specific code isn't necessary at all.
Differential Revision: https://reviews.llvm.org/D54285
llvm-svn: 346728
Summary:
Handle extra output from index loads in cases where we wish to
forward a load value directly from a preceeding store.
Fixes PR39571.
Reviewers: peter.smith, rengolin
Subscribers: javed.absar, hiraditya, arphaman, llvm-commits
Differential Revision: https://reviews.llvm.org/D54265
llvm-svn: 346654
This is a long-awaited follow-up suggested in D33578. Since then, we've picked up even more
opportunities for vector narrowing from changes like D53784, so there are a lot of test diffs.
Apart from 2-3 strange cases, these are all wins.
I've structured this to be no-functional-change-intended for any target except for x86
because I couldn't tell if AArch64, ARM, and AMDGPU would improve or not. All of those
targets have existing regression tests (4, 4, 10 files respectively) that would be
affected. Also, Hexagon overrides the shouldReduceLoadWidth() hook, but doesn't show
any regression test diffs. The trade-off is deciding if an extra vector load is better
than a single wide load + extract_subvector.
For x86, this is almost always better (on paper at least) because we often can fold
loads into subsequent ops and not increase the official instruction count. There's also
some unknown -- but potentially large -- benefit from using narrower vector ops if wide
ops are implemented with multiple uops and/or frequency throttling is avoided.
Differential Revision: https://reviews.llvm.org/D54073
llvm-svn: 346595
It's possible for vector op legalization to generate a shuffle. If that happens we should give a chance for DAG combine to combine that with a build_vector input.
I also fixed a bug in combineShuffleOfScalars that was considering the number of uses on a undef input to a shuffle. We don't care how many times undef is used.
Differential Revision: https://reviews.llvm.org/D54283
llvm-svn: 346530
Previous version used type erasure through a `void* (*)()` pointer,
which triggered gcc warning and implied a lot of reinterpret_cast.
This version should make it harder to hit ourselves in the foot.
Differential revision: https://reviews.llvm.org/D54203
llvm-svn: 346522
The DAGCombiner tries to SimplifySelectCC as follows:
select_cc(x, y, 16, 0, cc) -> shl(zext(set_cc(x, y, cc)), 4)
It can't cope with the situation of reordered operands:
select_cc(x, y, 0, 16, cc)
In that case we just need to swap the operands and invert the Condition Code:
select_cc(x, y, 16, 0, ~cc)
Differential Revision: https://reviews.llvm.org/D53236
llvm-svn: 346484
FindBetterNeighborChains simulateanously improves the chain
dependencies of a chain of related stores avoiding the generation of
extra token factors. For chains longer than the GatherAllAliasDepths,
stores further down in the chain will necessarily fail, a potentially
significant waste and preventing otherwise trivial parallelization.
This patch directly parallelize the chains of stores before improving
each store. This generally improves DAG-level parallelism.
Reviewers: courbet, spatel, RKSimon, bogner, efriedma, craig.topper, rnk
Subscribers: sdardis, javed.absar, hiraditya, jrtc27, atanasyan, llvm-commits
Differential Revision: https://reviews.llvm.org/D53552
llvm-svn: 346432
This adds the llvm-side support for post-inlining evaluation of the
__builtin_constant_p GCC intrinsic.
Also fixed SCCPSolver::visitCallSite to not blow up when seeing a call
to a function where canConstantFoldTo returns true, and one of the
arguments is a struct.
Updated from patch initially by Janusz Sobczak.
Differential Revision: https://reviews.llvm.org/D4276
llvm-svn: 346322
The original code avoided creating a zero vector after type legalization, but if we're after type legalization the type we have is legal. The real hazard we need to avoid is creating a build vector after op legalization. tryFoldToZero takes care of checking for this.
llvm-svn: 346119
These methods were just wrappers around getNode with additional asserts (identical and repeated 3 times). But getNode already has a switch that can be used to hold these asserts that allows them to be shared for all 3 opcodes. This also enables checking on the places that create these nodes without using the wrappers.
The rest of the patch is just changing all callers to use getNode directly.
llvm-svn: 346087
We already have custom lowering for the AVX case in LegalizeVectorOps. So its better to keep the regular extend op around as long as possible.
I had to qualify one place in DAG combine that created illegal vector extending load operations. This change by itself had no effect on any tests which is why its included here.
I've made a few cleanups to the custom lowering. The sign extend code no longer creates an identity shuffle with undef elements. The zero extend code now emits a zero_extend_vector_inreg instead of an unpckl with a zero vector.
For the high half of the custom lowering of zero_extend/any_extend, we're now using an unpckh with a zero vector or undef. Previously we used used a pshufd to move the upper 64-bits to the lower 64-bits and then used a zero_extend_vector_inreg. I think the zero vector should require less execution resources and be smaller code size.
Differential Revision: https://reviews.llvm.org/D54024
llvm-svn: 346043
reduceBuildVecConvertToConvertBuildVec vectorizes int2float in the DAGCombiner, which means that even if the LV/SLP has decided to keep scalar code using the cost models, this will override this.
While there are cases where vectorization is necessary in the DAG (mainly due to legalization artefacts), I don't think this is the case here, we should assume that the vectorizers know what they are doing.
Differential Revision: https://reviews.llvm.org/D53712
llvm-svn: 345964
I'm having trouble creating a test case for the ISD::TRUNCATE part of this that shows any codegen differences. But I was able to test the setcc path which is what the test changes here cover.
llvm-svn: 345908
This patch adds support for expanding vector CTPOP instructions and removes the x86 'bitmath' lowering which replicates the same expansion.
Differential Revision: https://reviews.llvm.org/D53258
llvm-svn: 345869
The test causes a crash because we were trying to extract v4f32 to v3f32, and the
narrowing factor was then 4/3 = 1 producing a bogus narrow type.
This should fix:
https://bugs.llvm.org/show_bug.cgi?id=39511
llvm-svn: 345842
SimplifySetCC could shrink a load without checking for
profitability or legality of such shink with a target.
Added checks to prevent shrinking of aligned scalar loads
in AMDGPU below dword as scalar engine does not support it.
Differential Revision: https://reviews.llvm.org/D53846
llvm-svn: 345778
lowerRangeToAssertZExt currently relies on something like EarlyCSE having
eliminated the constant range [0,1). At -O0 this leads to an assert.
Differential Revision: https://reviews.llvm.org/D53888
llvm-svn: 345770
Summary:
Normalize the offset for endianess before checking
if the store cover the load in ForwardStoreValueToDirectLoad.
Without this we missed out on some optimizations for big
endian targets. If for example having a 4 bytes store followed
by a 1 byte load, loading the least significant byte from the
store, the STCoversLD check would fail (see @test4 in
test/CodeGen/AArch64/load-store-forwarding.ll).
This patch also fixes a problem seen in an out-of-tree target.
The target has i40 as a legal type, it is big endian,
and the StoreSize for i40 is 48 bits. So when normalizing
the offset for endianess we need to take the StoreSize into
account (assuming that padding added when storing into
a larger StoreSize always is added at the most significant
end).
Reviewers: niravd
Reviewed By: niravd
Subscribers: javed.absar, kristof.beyls, llvm-commits, uabelho
Differential Revision: https://reviews.llvm.org/D53776
llvm-svn: 345636
Narrowing vector binops came up in the demanded bits discussion in D52912.
I don't think we're going to be able to do this transform in IR as a canonicalization
because of the risk of creating unsupported widths for vector ops, but we already have
a DAG TLI hook to allow what I was hoping for: isExtractSubvectorCheap(). This is
currently enabled for x86, ARM, and AArch64 (although only x86 has existing regression
test diffs).
This is artificially limited to not look through bitcasts because there are so many
test diffs already, but that's marked with a TODO and is a small follow-up.
Differential Revision: https://reviews.llvm.org/D53784
llvm-svn: 345602
Similar to FoldCONCAT_VECTORS, this patch adds FoldBUILD_VECTOR to simplify cases that can avoid the creation of the BUILD_VECTOR - if all the operands are UNDEF or if the BUILD_VECTOR simplifies to a copy.
This exposed an assumption in some AMDGPU code that getBuildVector was guaranteed to be a BUILD_VECTOR node that I've tried to handle.
Differential Revision: https://reviews.llvm.org/D53760
llvm-svn: 345578
Summary: Previously if we had a bitcast vector output type that needs promotion and a vector input type that needs widening we would just do a stack store and load to handle the conversion. We can do a little better if we can widen the bitcast to a legal vector type the same size as the widened input type. Then we can do the bitcast between this widened type and the widened input type. Afterwards we can extract_subvector back to the original output and any_extend that. Type legalization will then circle back and handle promotion of the extract_subvector and the any_extend will just be removed. This will avoid going through the stack and allows us to remove a custom version of this legalization from X86.
Reviewers: efriedma, RKSimon
Reviewed By: efriedma
Subscribers: javed.absar, llvm-commits
Differential Revision: https://reviews.llvm.org/D53229
llvm-svn: 345567
Add an intrinsic that takes 2 integers and perform saturation subtraction on
them.
This is a part of implementing fixed point arithmetic in clang where some of
the more complex operations will be implemented as intrinsics.
Differential Revision: https://reviews.llvm.org/D53783
llvm-svn: 345512
Add vector support to TargetLowering::expandFP_TO_UINT.
This exposes an issue in X86TargetLowering::LowerVSELECT which was assuming that the select mask was the same width as the LHS/RHS ops - as long as the result is a sign splat we can easily sext/trunk this.
llvm-svn: 345473
The DAGTypeLegalizer::getSETCCWidenedResultTy was widening the MaskVT, but the code in convertMask called after getSETCCWidenedResultTy had no idea this widening had occurred. So none of the operands were widened when convertMask created new setccs with the widened VT.
This patch removes the widening and adds some asserts to getNode to validate the types of setccs to prevent issues like this in the future.
Differential Revision: https://reviews.llvm.org/D53743
llvm-svn: 345428
The "dead" markings allow existing target-independent optimizations,
like MachineSink, to trigger more frequently. The CPSR defs would have
eventually been marked dead by LiveVariables, so this only affects
optimizations before regalloc.
The ARMBaseInstrInfo.cpp change is fixing a bug which is only visible
with this change: the transform adds a use to an otherwise dead def
of CPSR. This is covered by existing regression tests.
thumb2-tbh.ll breaks for Thumb1 due to MachineLICM changing the
generated code; I'll fix it in D53452.
Differential Revision: https://reviews.llvm.org/D53453
llvm-svn: 345420
Summary:
This adds support for LSDA (exception table) generation for wasm EH.
Wasm EH mostly follows the structure of Itanium-style exception tables,
with one exception: a call site table entry in wasm EH corresponds to
not a call site but a landing pad.
In wasm EH, the VM is responsible for stack unwinding. After an
exception occurs and the stack is unwound, the control flow is
transferred to wasm 'catch' instruction by the VM, after which the
personality function is called from the compiler-generated code. (Refer
to WasmEHPrepare pass for more information on this part.)
This patch:
- Changes wasm.landingpad.index intrinsic to take a token argument, to
make this 1:1 match with a catchpad instruction
- Stores landingpad index info and catch type info MachineFunction in
before instruction selection
- Lowers wasm.lsda intrinsic to an MCSymbol pointing to the start of an
exception table
- Adds WasmException class with overridden methods for table generation
- Adds support for LSDA section in Wasm object writer
Reviewers: dschuff, sbc100, rnk
Subscribers: mgorny, jgravelle-google, sunfish, llvm-commits
Differential Revision: https://reviews.llvm.org/D52748
llvm-svn: 345345
Replacing BinaryOperator::isFNeg(...) to avoid regressions when we
separate FNeg from the FSub IR instruction.
Differential Revision: https://reviews.llvm.org/D53650
llvm-svn: 345295
As noticed on D52965, the SINT_TO_FP i64 to f32 legalization code has been dead for years - protected by an assert.
Differential Revision: https://reviews.llvm.org/D53703
llvm-svn: 345290
As suggested on D52965, this patch moves the i64 to f64 UINT_TO_FP expansion code from LegalizeDAG into TargetLowering and makes it available to LegalizeVectorOps as well.
Not only does this help perform X86 lowering as a true vectorization instead of (partially vectorized) scalar conversions, it avoids the HADDPD op from the scalar code which can be slow on most targets.
The AVX512F does have the vcvtusi2sdq scalar operation but we don't unroll to use it as it seems to only help for the v2f64 case - otherwise the unrolling cost will certainly be too high. My feeling is that we should leave it to the vectorizers - and if it generates the vector UINT_TO_FP we should use it.
Differential Revision: https://reviews.llvm.org/D53649
llvm-svn: 345256
Summary:
Changes all uses of minnan/maxnan to minimum/maximum
globally. These names emphasize that the semantic difference between
these operations is more than just NaN-propagation.
Reviewers: arsenm, aheejin, dschuff, javed.absar
Subscribers: jholewinski, sdardis, wdng, sbc100, jgravelle-google, jrtc27, atanasyan, llvm-commits
Differential Revision: https://reviews.llvm.org/D53112
llvm-svn: 345218
Until now, we've only checked whether merging stores would cause a cycle via
the value argument, but the address and indexed offset arguments are also
capable of creating cycles in some situations.
The addresses are all base+offset with notionally the same base, but the base
SDNode may still be different (e.g. via an indexed load in one case, and an
ISD::ADD elsewhere). This allows cycles to creep in if one of these sources
depends on another.
The indexed offset is usually undef (representing a non-indexed store), but on
some architectures (e.g. 32-bit ARM-mode ARM) it can be an arbitrary value,
again allowing dependency cycles to creep in.
llvm-svn: 345200
When implementing memset's today we often see this pattern:
$x0 = MOV 0xXYXYXYXYXYXYXYXY
store $x0, ...
$w1 = MOV 0xXYXYXYXY
store $w1, ...
We first create a 64bit constant in a 64bit register with all bytes the
same and then create a 32bit constant with all bytes the same in a 32bit
register. In many targets we could just access the lower byte of the
64bit register instead.
- Ideally this would be handled by the ConstantHoist pass but it runs
too early when memset isn't expanded yet.
- The memset expansion code already had this optimization implemented,
however SelectionDAG constantfolding would constantfold the
"trunc(bigconstnat)" pattern to "smallconstant".
- This patch makes the memset expansion mark the constant as Opaque and
stop DAGCombiner from constant folding in this situation. (Similar to
how ConstantHoisting marks things as Opaque to avoid folding
ADD/SUB/etc.)
Differential Revision: https://reviews.llvm.org/D53181
llvm-svn: 345102
As suggested on D53258, this patch move the CTPOP expansion code from SelectionDAGLegalize to TargetLowering to allow it to be reused by the VectorLegalizer.
Proper vector support will be added by D53258.
llvm-svn: 345066
As suggested on D53258, this patch shares common CTLZ expansion code between VectorLegalizer and SelectionDAGLegalize by putting it in TargetLowering.
Extension to D53474
llvm-svn: 345060
Vector types are not possible here because this code only starts
matching from the scalar bool value of a conditional branch, but
this is another step towards completely removing the fake binop
queries for not/neg/fneg.
llvm-svn: 345041
As suggested on D53258, this patch demonstrates sharing common CTTZ expansion code between VectorLegalizer and SelectionDAGLegalize by putting it in TargetLowering.
I intend to move CTLZ and (scalar) CTPOP over as well and then update D53258 accordingly.
Differential Revision: https://reviews.llvm.org/D53474
llvm-svn: 345039
Add an intrinsic that takes 2 integers and perform unsigned saturation
addition on them.
This is a part of implementing fixed point arithmetic in clang where some of
the more complex operations will be implemented as intrinsics.
Differential Revision: https://reviews.llvm.org/D53340
llvm-svn: 344971
I've included a fix to DAGCombiner::ForwardStoreValueToDirectLoad that I believe will prevent the previous miscompile.
Original commit message:
Theoretically this was done to simplify the amount of isel patterns that were needed. But it also meant a substantial number of our isel patterns have to match an explicit bitcast. By making the vXi32/vXi16/vXi8 types legal for loads, DAG combiner should be able to change the load type to rem
I had to add some additional plain load instruction patterns and a few other special cases, but overall the isel table has reduced in size by ~12000 bytes. So it looks like this promotion was hurting us more than helping.
I still have one crash in vector-trunc.ll that I'm hoping @RKSimon can help with. It seems to relate to using getTargetConstantFromNode on a load that was shrunk due to an extract_subvector combine after the constant pool entry was created. So we end up decoding more mask elements than the lo
I'm hoping this patch will simplify the number of patterns needed to remove the and/or/xor promotion.
Reviewers: RKSimon, spatel
Reviewed By: RKSimon
Subscribers: llvm-commits, RKSimon
Differential Revision: https://reviews.llvm.org/D53306
llvm-svn: 344965
Introduce new versions that follow the IEEE semantics
to help with legalization that may need quieted inputs.
There are some regressions from inserting unnecessary
canonicalizes when these are matched from fast math
fcmp + select which should be fixed in a future commit.
llvm-svn: 344914
This is a late backend subset of the IR transform added with:
D52439
We can confirm that the conversion to a 'trunc' is correct by running:
$ opt -instcombine -data-layout="e"
(assuming the IR transforms are correct; change "e" to "E" for big-endian)
As discussed in PR39016:
https://bugs.llvm.org/show_bug.cgi?id=39016
...the pattern may emerge during legalization, so that's we are waiting for an
insertelement to become a scalar_to_vector in the pattern matching here.
The DAG allows for fun variations that are not possible in IR. Result types for
extracts and scalar_to_vector don't necessarily match input types, so that means
we have to be a bit more careful in the transform (see code comments).
The tests show that we don't handle cases that require a shift (as we did in the
IR version). I've left that as a potential follow-up because I'm not sure if
that's a real concern at this late stage.
Differential Revision: https://reviews.llvm.org/D53201
llvm-svn: 344872
Add an intrinsic that takes 2 integers and perform saturation addition on them.
This is a part of implementing fixed point arithmetic in clang where some of
the more complex operations will be implemented as intrinsics.
Differential Revision: https://reviews.llvm.org/D53053
llvm-svn: 344629
Summary:
This adds support for LSDA (exception table) generation for wasm EH.
Wasm EH mostly follows the structure of Itanium-style exception tables,
with one exception: a call site table entry in wasm EH corresponds to
not a call site but a landing pad.
In wasm EH, the VM is responsible for stack unwinding. After an
exception occurs and the stack is unwound, the control flow is
transferred to wasm 'catch' instruction by the VM, after which the
personality function is called from the compiler-generated code. (Refer
to WasmEHPrepare pass for more information on this part.)
This patch:
- Changes wasm.landingpad.index intrinsic to take a token argument, to
make this 1:1 match with a catchpad instruction
- Stores landingpad index info and catch type info MachineFunction in
before instruction selection
- Lowers wasm.lsda intrinsic to an MCSymbol pointing to the start of an
exception table
- Adds WasmException class with overridden methods for table generation
- Adds support for LSDA section in Wasm object writer
Reviewers: dschuff, sbc100, rnk
Subscribers: mgorny, jgravelle-google, sunfish, llvm-commits
Differential Revision: https://reviews.llvm.org/D52748
llvm-svn: 344575
This is intended to make the backend on par with functionality that was
added to the IR version of SimplifyDemandedVectorElts in:
rL343727
...and the original motivation is that we need to improve demanded-vector-elements
in several ways to avoid problems that would be exposed in D51553.
Differential Revision: https://reviews.llvm.org/D52912
llvm-svn: 344541
by `getTerminator()` calls instead be declared as `Instruction`.
This is the biggest remaining chunk of the usage of `getTerminator()`
that insists on the narrow type and so is an easy batch of updates.
Several files saw more extensive updates where this would cascade to
requiring API updates within the file to use `Instruction` instead of
`TerminatorInst`. All of these were trivial in nature (pervasively using
`Instruction` instead just worked).
llvm-svn: 344502
The final stage of CTPOP expansion (v = (v * 0x01010101...) >> (Len - 8)) is completely pointless for the byte (Len = 8) case as it reduces to (v = (v * 0x01...) >> 0), but annoyingly this doesn't always get optimized away.
Found while investigating generic vector CTPOP expansion (PR32655).
llvm-svn: 344477
The CTPOP case has been changed from VT.getSizeInBits to VT.getScalarSizeInBits - but this fits in with future work for vector support (PR32655) and doesn't affect any current (scalar) uses.
llvm-svn: 344461
Summary:
getShiftAmountTy for X86 returns MVT::i8. If a BSWAP or BITREVERSE is created that requires promotion and the difference between the original VT and the promoted VT is more than 255 then we won't able to create the constant.
This patch adds a check to replace the result from getShiftAmountTy to MVT::i32 if the difference won't fit. This should get legalized later when the shift is ultimately expanded since its clearly an illegal type that we're only promoting to make it a power of 2 bit width. Alternatively we could base the decision completely on the largest shift amount the promoted VT could use.
Vectors should be immune here because getShiftAmountTy always returns the incoming VT for vectors. Only the scalar shift amount can be changed by the targets.
Reviewers: eli.friedman, RKSimon, spatel
Reviewed By: RKSimon
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D53232
llvm-svn: 344460
There is one remnant - AVX1 custom splitting of 256-bit vectors - which is due to a regression where the X86ISD::ANDNP is still performed as a YMM.
I've also tightened the CTLZ or CTPOP lowering in SelectionDAGLegalize::ExpandBitCount to require a legal CTLZ - it doesn't affect existing users and fixes an issue with AVX512 codegen.
llvm-svn: 344457
Summary:
These new intrinsics have the semantics of the `minimum` and `maximum`
operations specified by the latest draft of IEEE 754-2018. Unlike
llvm.minnum and llvm.maxnum, these new intrinsics propagate NaNs and
always treat -0.0 as less than 0.0. `minimum` and `maximum` lower
directly to the existing `fminnan` and `fmaxnan` ISel DAG nodes. It is
safe to reuse these DAG nodes because before this patch were only
emitted in situations where there were known to be no NaN arguments or
where NaN propagation was correct and there were known to be no zero
arguments. I know of only four backends that lower fminnan and
fmaxnan: WebAssembly, ARM, AArch64, and SystemZ, and each of these
lowers fminnan and fmaxnan to instructions that are compatible with
the IEEE 754-2018 semantics.
Reviewers: aheejin, dschuff, sunfish, javed.absar
Subscribers: kristof.beyls, dexonsmith, kristina, llvm-commits
Differential Revision: https://reviews.llvm.org/D52764
llvm-svn: 344437
This is more consistent with what we usually do and matches some code X86 custom emits in some cases that I think I can cleanup.
The MIPS test change just looks to be an instruction ordering change.
llvm-svn: 344422
This saves a conversion to extracts and build_vector. We already do this when both the result and the input need to be widened to the same type.
This changed the sse-intrinsics-fast-isel test because we don't lower (insert_vector_elt (scalar_to_vector X), Y, 1) well. We turn it into (vector_shuffle (scalar_to_vector X), (scalar_to_vector Y), <0, 4, 2, 3>) losing track of the fact that the upper elts could be undef.
We should probably find a way to prevent the scalarization of the <2 x f32> load on these tests.
llvm-svn: 344404
If the input type is widened as well, but we still were forced to unroll, we shouldn't be considering the widened input element count. We should only create as many scalar operations as the original type called for.
This will be important for an upcoming patch.
llvm-svn: 344403
Generalize SelectionDAGLegalize's CTLZ expansion to handle vectors - lets VectorLegalizer::ExpandCTLZ to just pass the expansion on instead of repeating the same codegen.
llvm-svn: 344349
I want to add another pattern here that includes scalar_to_vector,
so this makes that patch smaller. I was hoping to remove the
hasOneUse() check because it shouldn't be necessary for common
codegen, but an AMDGPU test has a comment suggesting that the
extra check makes things better on one of those targets.
llvm-svn: 344320
Summary:
Extend analysis forwarding loads from preceeding stores to work with
extended loads and truncated stores to the same address so long as the
load is fully subsumed by the store.
Hexagon's swp-epilog-phis.ll and swp-memrefs-epilog1.ll test are
deleted as they've no longer seem to be relevant.
Reviewers: RKSimon, rnk, kparzysz, javed.absar
Subscribers: sdardis, nemanjai, hiraditya, atanasyan, llvm-commits
Differential Revision: https://reviews.llvm.org/D49200
llvm-svn: 344142
Similar to what already happens in the DAGCombiner wrappers, this patch adds the root nodes back onto the worklist if the DCI wrappers' SimplifyDemandedBits/SimplifyDemandedVectorElts were successful.
Differential Revision: https://reviews.llvm.org/D53026
llvm-svn: 344132
We already do the following combines:
(bitcast int (and (bitcast fp X to int), 0x7fff...) to fp) -> fabs X
(bitcast int (xor (bitcast fp X to int), 0x8000...) to fp) -> fneg X
When the target has "bit preserving fp logic". This patch just extends it
to also combine:
(bitcast int (or (bitcast fp X to int), 0x8000...) to fp) -> fneg (fabs X)
As some targets have fnabs and even those that don't can efficiently lower
both the fabs and the fneg.
Differential revision: https://reviews.llvm.org/D44548
llvm-svn: 344093
r126518 introduced a a type parameter to the getShiftAmountTy target hook. It
produces the type of the shift (RHSTy), parameterised by the type of the value
being shifted (LHSTy). SelectionDAGBuilder::visitShift passed RHSTy rather
than LHSTy and this patch corrects this. The change is a no-op because in LLVM
IR the LHS and RHS types for a shift must be equal anyway.
llvm-svn: 343955
This is where we legalize gather and masked load so this is consistent.
Since these ops are always on vectors I've chosen to go with LegalizeDAG since that's what we do for other vector only ops like BUILD_VECTOR, VECTOR_SHUFFLE, etc. The ScalarizeMaskedMemIntrinsic pass should take care of scalarizing these before SelectionDAG so hopefully we don't need to worry about illegally typed scalar ops being emitted in the legalizing. If we did we would need to do this in LegalizeVectorOps so we could get the second type legalization that runs between LegalizeVectorOps and LegalizeDAG.
llvm-svn: 343947
This change is proposed as a part of D44548, but we
need this independently to avoid regressions from improved
undef propagation in SimplifyDemandedVectorElts().
llvm-svn: 343940
rL343913 was using SimplifyDemandedBits's original demanded mask instead of the adjusted 'NewMask' that accounts for multiple uses of the op (those variable names really need improving....).
Annoyingly many of the test changes (back to pre-rL343913 state) are actually safe - but only because their multiple uses are all by PMULDQ/PMULUDQ.
Thanks to Jan Vesely (@jvesely) for bisecting the bug.
llvm-svn: 343935
It was always returning the chain which seems to be the result number of the SDValue in the lit tests we have. But I don't know if that's guaranteed.
llvm-svn: 343933
This patch enables SimplifyDemandedBits to call SimplifyDemandedVectorElts in cases where the demanded bits mask covers entire elements of a bitcasted source vector.
There are a couple of cases here where simplification at a deeper level (such as through bitcasts) prevents further simplification - CommitTargetLoweringOpt only adds immediate uses/users back to the worklist when we might want to combine the original caller again to see what else it can simplify.
As well as that I had to disable handling of bool vector until SimplifyDemandedVectorElts better supports some of their opcodes (SETCC, shifts etc.).
Fixes PR39178
Differential Revision: https://reviews.llvm.org/D52935
llvm-svn: 343913
And use that to transform fsub with zero constant operands.
The integer part isn't used yet, but it is proposed for use in
D44548, so adding both enhancements here makes that
patch simpler.
llvm-svn: 343865
Previously we replaced the chain use ourself and return the data result. LegalizeVectorOps then detected that we'd done this and assumed the chain had already been handled.
This commit instead returns a MERGE_VALUES node with two results joined from nodes. This allows LegalizeVectorOps to do all the replacements for us without any special casing. The MERGE_VALUES will be removed by DAG combine.
llvm-svn: 343817
Sanjay Patel