integer.
Fixes issues on some architectures where we use arithmetic ops to build
vectors, which can cause bad things to happen for loads/stores of mixed
types.
Patch by Fiona Glaser
llvm-svn: 274307
This pass hoists duplicated computations in the program. The primary goal of
gvn-hoist is to reduce the size of functions before inline heuristics to reduce
the total cost of function inlining.
Pass written by Sebastian Pop, Aditya Kumar, Xiaoyu Hu, and Brian Rzycki.
Important algorithmic contributions by Daniel Berlin under the form of reviews.
Differential Revision: http://reviews.llvm.org/D19338
llvm-svn: 274305
Except the seed uniform instructions (conditional branch and consecutive ptr
instructions), dependencies to be added into uniform set should only be used
by existing uniform instructions or intructions outside of current loop.
Differential Revision: http://reviews.llvm.org/D21755
llvm-svn: 274262
Summary:
Found cases where DSE incorrectly add partially-overwritten intervals.
Please see the test case for details.
Reviewers: mcrosier, eeckstein, hfinkel
Subscribers: mcrosier, llvm-commits
Differential Revision: http://reviews.llvm.org/D21859
llvm-svn: 274237
For the new hotness attribute, the API will take the pass rather than
the pass name so we can no longer play the trick of AlwaysPrint being a
special pass name. This adds a getter to help the transition.
There is also a corresponding clang patch.
llvm-svn: 274100
Revert "[InstCombine] Combine A->B->A BitCast"
as this appears to cause PR27996 and as discussed in http://reviews.llvm.org/D20847
This reverts commits r270135 and r263734.
llvm-svn: 274094
If the load is conditional we can't hoist its 0-iteration instance to
the preheader because that would make it unconditional. Thus we would
access a memory location that the original loop did not access.
llvm-svn: 273991
See the bug report at https://github.com/google/sanitizers/issues/691. When a dynamic alloca has a constant size, ASan instrumentation will treat it as a regular dynamic alloca (insert calls to poison and unpoison), but the backend will turn it into a regular stack variable. The poisoning/unpoisoning is then broken. This patch will treat such allocas as static.
Differential Revision: http://reviews.llvm.org/D21509
llvm-svn: 273888
It did not handle correctly cases without GEP.
The following loop wasn't vectorized:
for (int i=0; i<len; i++)
*to++ = *from++;
I use getPtrStride() to find Stride for memory access and return 0 is the Stride is not 1 or -1.
Re-commit rL273257 - revision: http://reviews.llvm.org/D20789
llvm-svn: 273864
Summary:
This is a straightforward extension of what LoopUnswitch does to
branches to guards. That is, we unswitch
```
for (;;) {
...
guard(loop_invariant_cond);
...
}
```
into
```
if (loop_invariant_cond) {
for (;;) {
...
// There is no need to emit guard(true)
...
}
} else {
for (;;) {
...
guard(false);
// SimplifyCFG will clean this up by adding an
// unreachable after the guard(false)
...
}
}
```
Reviewers: majnemer
Subscribers: mcrosier, llvm-commits, mzolotukhin
Differential Revision: http://reviews.llvm.org/D21725
llvm-svn: 273801
SimplifyCFG had logic to insert calls to llvm.trap for two very
particular IR patterns: stores and invokes of undef/null.
While InstCombine canonicalizes certain undefined behavior IR patterns
to stores of undef, phase ordering means that this cannot be relied upon
in general.
There are much better tools than llvm.trap: UBSan and ASan.
N.B. I could be argued into reverting this change if a clear argument as
to why it is important that we synthesize llvm.trap for stores, I'd be
hard pressed to see why it'd be useful for invokes...
llvm-svn: 273778
This intrinsic safely loads a function pointer from a virtual table pointer
using type metadata. This intrinsic is used to implement control flow integrity
in conjunction with virtual call optimization. The virtual call optimization
pass will optimize away llvm.type.checked.load intrinsics associated with
devirtualized calls, thereby removing the type check in cases where it is
not needed to enforce the control flow integrity constraint.
This patch also introduces the capability to copy type metadata between
global variables, and teaches the virtual call optimization pass to do so.
Differential Revision: http://reviews.llvm.org/D21121
llvm-svn: 273756
r273711 was reverted by r273743. The inliner needs to know about any
call sites in the inlined function. These were obscured if we replaced
a call to undef with an undef but kept the call around.
This fixes PR28298.
llvm-svn: 273753
Summary: Set ProfileSummary in SampleProfilerLoader.
Reviewers: davidxl, eraman
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D21702
llvm-svn: 273745
The bitset metadata currently used in LLVM has a few problems:
1. It has the wrong name. The name "bitset" refers to an implementation
detail of one use of the metadata (i.e. its original use case, CFI).
This makes it harder to understand, as the name makes no sense in the
context of virtual call optimization.
2. It is represented using a global named metadata node, rather than
being directly associated with a global. This makes it harder to
manipulate the metadata when rebuilding global variables, summarise it
as part of ThinLTO and drop unused metadata when associated globals are
dropped. For this reason, CFI does not currently work correctly when
both CFI and vcall opt are enabled, as vcall opt needs to rebuild vtable
globals, and fails to associate metadata with the rebuilt globals. As I
understand it, the same problem could also affect ASan, which rebuilds
globals with a red zone.
This patch solves both of those problems in the following way:
1. Rename the metadata to "type metadata". This new name reflects how
the metadata is currently being used (i.e. to represent type information
for CFI and vtable opt). The new name is reflected in the name for the
associated intrinsic (llvm.type.test) and pass (LowerTypeTests).
2. Attach metadata directly to the globals that it pertains to, rather
than using the "llvm.bitsets" global metadata node as we are doing now.
This is done using the newly introduced capability to attach
metadata to global variables (r271348 and r271358).
See also: http://lists.llvm.org/pipermail/llvm-dev/2016-June/100462.html
Differential Revision: http://reviews.llvm.org/D21053
llvm-svn: 273729
This patch moves MSSA's caching walker into MemorySSA, and moves the
actual definition of MSSA's caching walker out of MemorySSA.h. This is
done in preparation for the new walker, which should be out for review
soonish.
Also, this patch removes a field from UpwardsMemoryQuery and has a few
lines of diff from clang-format'ing MemorySSA.cpp.
llvm-svn: 273723
By putting all the possible commutations together, we simplify the code.
Note that this is NFCI, but I'm adding tests that actually exercise each
commutation pattern because we don't have this anywhere else.
llvm-svn: 273702
The interleaved access analysis currently assumes that the inserted run-time
pointer aliasing checks ensure the absence of dependences that would prevent
its instruction reordering. However, this is not the case.
Issues can arise from how code generation is performed for interleaved groups.
For a load group, all loads in the group are essentially moved to the location
of the first load in program order, and for a store group, all stores in the
group are moved to the location of the last store. For groups having members
involved in a dependence relation with any other instruction in the loop, this
reordering can violate the dependence.
This patch teaches the interleaved access analysis how to avoid breaking such
dependences, and should fix PR27626.
An assumption of the original analysis was that the accesses had been collected
in "program order". The analysis was then simplified by visiting the accesses
bottom-up. However, this ordering was never guaranteed for anything other than
single basic block loops. Thus, this patch also enforces the desired ordering.
Reference: https://llvm.org/bugs/show_bug.cgi?id=27626
Differential Revision: http://reviews.llvm.org/D19984
llvm-svn: 273687
Summary:
We can avoid repeating the check `isGuaranteedToExecute` when it's already called once while checking if the alignment can be widened for the load/store being hoisted.
The function is invariant for the same instruction `UI` in `isGuaranteedToExecute(*UI, DT, CurLoop, SafetyInfo);`
Reviewers: hfinkel, eli.friedman
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D21672
llvm-svn: 273671
reduce the number of comparisons.
Specifically, InstCombine can turn:
(i == 5334 || i == 5335)
into:
((i | 1) == 5335)
SimplifyCFG was already able to detect the pattern:
(i == 5334 || i == 5335)
to:
((i & -2) == 5334)
This patch supersedes D21315 and resolves PR27555
(https://llvm.org/bugs/show_bug.cgi?id=27555).
Thanks to David and Chandler for the suggestions!
Author: Thomas Jablin (tjablin)
Reviewers: majnemer chandlerc halfdan cycheng
http://reviews.llvm.org/D21397
llvm-svn: 273639
Summary:
This instcombine rule folds away trunc operations that have value available from a prior load or store.
This kind of code can be generated as a result of GVN widening the load or from source code as well.
Reviewers: reames, majnemer, sanjoy
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D21246
llvm-svn: 273608
DeadStoreElimination can currently remove a small store rendered unnecessary by
a later larger one, but could not remove a larger store rendered unnecessary by
a series of later smaller ones. This adds that capability.
It works by keeping a map, which is used as an effective interval map, for each
store later overwritten only partially, and filling in that interval map as
more such stores are discovered. No additional walking or aliasing queries are
used. In the map forms an interval covering the the entire earlier store, then
it is dead and can be removed. The map is used as an interval map by storing a
mapping between the ending offset and the beginning offset of each interval.
I discovered this problem when investigating a performance issue with code like
this on PowerPC:
#include <complex>
using namespace std;
complex<float> bar(complex<float> C);
complex<float> foo(complex<float> C) {
return bar(C)*C;
}
which produces this:
define void @_Z4testSt7complexIfE(%"struct.std::complex"* noalias nocapture sret %agg.result, i64 %c.coerce) {
entry:
%ref.tmp = alloca i64, align 8
%tmpcast = bitcast i64* %ref.tmp to %"struct.std::complex"*
%c.sroa.0.0.extract.shift = lshr i64 %c.coerce, 32
%c.sroa.0.0.extract.trunc = trunc i64 %c.sroa.0.0.extract.shift to i32
%0 = bitcast i32 %c.sroa.0.0.extract.trunc to float
%c.sroa.2.0.extract.trunc = trunc i64 %c.coerce to i32
%1 = bitcast i32 %c.sroa.2.0.extract.trunc to float
call void @_Z3barSt7complexIfE(%"struct.std::complex"* nonnull sret %tmpcast, i64 %c.coerce)
%2 = bitcast %"struct.std::complex"* %agg.result to i64*
%3 = load i64, i64* %ref.tmp, align 8
store i64 %3, i64* %2, align 4 ; <--- ***** THIS SHOULD NOT BE HERE ****
%_M_value.realp.i.i = getelementptr inbounds %"struct.std::complex", %"struct.std::complex"* %agg.result, i64 0, i32 0, i32 0
%4 = lshr i64 %3, 32
%5 = trunc i64 %4 to i32
%6 = bitcast i32 %5 to float
%_M_value.imagp.i.i = getelementptr inbounds %"struct.std::complex", %"struct.std::complex"* %agg.result, i64 0, i32 0, i32 1
%7 = trunc i64 %3 to i32
%8 = bitcast i32 %7 to float
%mul_ad.i.i = fmul fast float %6, %1
%mul_bc.i.i = fmul fast float %8, %0
%mul_i.i.i = fadd fast float %mul_ad.i.i, %mul_bc.i.i
%mul_ac.i.i = fmul fast float %6, %0
%mul_bd.i.i = fmul fast float %8, %1
%mul_r.i.i = fsub fast float %mul_ac.i.i, %mul_bd.i.i
store float %mul_r.i.i, float* %_M_value.realp.i.i, align 4
store float %mul_i.i.i, float* %_M_value.imagp.i.i, align 4
ret void
}
the problem here is not just that the i64 store is unnecessary, but also that
it blocks further backend optimizations of the other uses of that i64 value in
the backend.
In the future, we might want to add a special case for handling smaller
accesses (e.g. using a bit vector) if the map mechanism turns out to be
noticeably inefficient. A sorted vector is also a possible replacement for the
map for small numbers of tracked intervals.
Differential Revision: http://reviews.llvm.org/D18586
llvm-svn: 273559
This is a convenience iterator that allows clients to enumerate the
GlobalObjects within a Module.
Also start using it in a few places where it is obviously the right thing
to use.
Differential Revision: http://reviews.llvm.org/D21580
llvm-svn: 273470
It's only useful to asan-itize profiling globals while debugging llvm's
profiling instrumentation passes. Enabling asan along with instrprof or
gcov instrumentation shouldn't incur extra overhead.
This patch is in the same spirit as r264805 and r273202, which disabled
tsan instrumentation of instrprof/gcov globals.
Differential Revision: http://reviews.llvm.org/D21541
llvm-svn: 273444
Do not instrument pointers with address space attributes since we cannot track
them anyway. Instrumenting them results in false positives in ASan and a
compiler crash in TSan. (The compiler should not crash in any case, but that's
a different problem.)
llvm-svn: 273339
The large offset is being tested on Windows 10 (which has larger usable
virtual address space than Windows 8 or earlier)
Patch by: Wei Wang
Differential Revision: http://reviews.llvm.org/D21523
llvm-svn: 273269
It did not handle correctly cases without GEP.
The following loop wasn't vectorized:
for (int i=0; i<len; i++)
*to++ = *from++;
I use getPtrStride() to find Stride for memory access and return 0 is the Stride is not 1 or -1.
Differential revision: http://reviews.llvm.org/D20789
llvm-svn: 273257
There is a known intended race here. This is a follow-up to r264805,
which disabled tsan instrumentation for updates to instrprof counters.
For more background on this please see the discussion in D18164.
llvm-svn: 273202
By moving this transform to InstSimplify from InstCombine, we sidestep the problem/question
raised by PR27869:
https://llvm.org/bugs/show_bug.cgi?id=27869
...where InstCombine turns an icmp+zext into a shift causing us to miss the fold.
Credit to David Majnemer for a draft patch of the changes to InstructionSimplify.cpp.
Differential Revision: http://reviews.llvm.org/D21512
llvm-svn: 273200
Summary: Inliner needs ACT when calling InlineFunction. Instead of nullptr, we need to pass it in from SampleProfileLoader
Reviewers: davidxl
Subscribers: eraman, vsk, danielcdh, llvm-commits
Differential Revision: http://reviews.llvm.org/D21205
llvm-svn: 273199
This reverts commit r273160, reapplying r273132.
RecursivelyDeleteTriviallyDeadInstructions cannot be called on a
parentless Instruction.
llvm-svn: 273162
This reverts commit r273132.
Breaks multiple test under /llvm/test:Transforms (e.g.
llvm/test:Transforms/LoopIdiom/basic.ll.test) under asan.
llvm-svn: 273160
After a store has been eliminated, when making sure that the
instruction iterator points to a valid instruction, dbg intrinsics are
now ignored as a new instruction.
Patch by Henric Karlsson.
Reviewed by Daniel Berlin.
Differential Revision: http://reviews.llvm.org/D21076
llvm-svn: 273141
Removing dead instructions requires remembering which operands have
already been removed. RecursivelyDeleteTriviallyDeadInstructions has
this logic, don't partially reimplement it in LoopIdiomRecognize.
This fixes PR28196.
llvm-svn: 273132
Change the underlying offset and comparisons to use int64_t instead of
uint64_t.
Patch by River Riddle!
Differential Revision: http://reviews.llvm.org/D21499
llvm-svn: 273105
CodeGen has hooks that allow targets to emit specialized code instead
of calls to memcmp, memchr, strcpy, stpcpy, strcmp, strlen, strnlen.
When ASan/MSan/TSan/ESan is in use, this sidesteps its interceptors, resulting
in uninstrumented memory accesses. To avoid that, make these sanitizers
mark the calls as nobuiltin.
Differential Revision: http://reviews.llvm.org/D19781
llvm-svn: 273083
This is a functional change for LLE and LDist. The other clients (LV,
LVerLICM) already had this explicitly enabled.
The temporary boolean parameter to LAA is removed that allowed turning
off speculation of symbolic strides. This makes LAA's caching interface
LAA::getInfo only take the loop as the parameter. This makes the
interface more friendly to the new Pass Manager.
The flag -enable-mem-access-versioning is moved from LV to a LAA which
now allows turning off speculation globally.
llvm-svn: 273064
This is indeed a much cleaner approach (thanks to Daniel Berlin
for pointing out), and also David/Sean for review.
Differential Revision: http://reviews.llvm.org/D21454
llvm-svn: 273032
The motivating example for this transform is similar to D20774 where bitcasts interfere
with a single cmp/select sequence, but in this case we have 2 uses of each bitcast to
produce min and max ops:
define void @minmax_bc_store(<4 x float> %a, <4 x float> %b, <4 x float>* %ptr1, <4 x float>* %ptr2) {
%cmp = fcmp olt <4 x float> %a, %b
%bc1 = bitcast <4 x float> %a to <4 x i32>
%bc2 = bitcast <4 x float> %b to <4 x i32>
%sel1 = select <4 x i1> %cmp, <4 x i32> %bc1, <4 x i32> %bc2
%sel2 = select <4 x i1> %cmp, <4 x i32> %bc2, <4 x i32> %bc1
%bc3 = bitcast <4 x float>* %ptr1 to <4 x i32>*
store <4 x i32> %sel1, <4 x i32>* %bc3
%bc4 = bitcast <4 x float>* %ptr2 to <4 x i32>*
store <4 x i32> %sel2, <4 x i32>* %bc4
ret void
}
With this patch, we move the selects up to use the input args which allows getting rid of
all of the bitcasts:
define void @minmax_bc_store(<4 x float> %a, <4 x float> %b, <4 x float>* %ptr1, <4 x float>* %ptr2) {
%cmp = fcmp olt <4 x float> %a, %b
%sel1.v = select <4 x i1> %cmp, <4 x float> %a, <4 x float> %b
%sel2.v = select <4 x i1> %cmp, <4 x float> %b, <4 x float> %a
store <4 x float> %sel1.v, <4 x float>* %ptr1, align 16
store <4 x float> %sel2.v, <4 x float>* %ptr2, align 16
ret void
}
The asm for x86 SSE then improves from:
movaps %xmm0, %xmm2
cmpltps %xmm1, %xmm2
movaps %xmm2, %xmm3
andnps %xmm1, %xmm3
movaps %xmm2, %xmm4
andnps %xmm0, %xmm4
andps %xmm2, %xmm0
orps %xmm3, %xmm0
andps %xmm1, %xmm2
orps %xmm4, %xmm2
movaps %xmm0, (%rdi)
movaps %xmm2, (%rsi)
To:
movaps %xmm0, %xmm2
minps %xmm1, %xmm2
maxps %xmm0, %xmm1
movaps %xmm2, (%rdi)
movaps %xmm1, (%rsi)
The TODO comments show that we're limiting this transform only to vectors and only to bitcasts
because we need to improve other transforms or risk creating worse codegen.
Differential Revision: http://reviews.llvm.org/D21190
llvm-svn: 273011
pass manager passes' `run` methods.
This removes a bunch of SFINAE goop from the pass manager and just
requires pass authors to accept `AnalysisManager<IRUnitT> &` as a dead
argument. This is a small price to pay for the simplicity of the system
as a whole, despite the noise that changing it causes at this stage.
This will also helpfull allow us to make the signature of the run
methods much more flexible for different kinds af passes to support
things like intelligently updating the pass's progression over IR units.
While this touches many, many, files, the changes are really boring.
Mostly made with the help of my trusty perl one liners.
Thanks to Sean and Hal for bouncing ideas for this with me in IRC.
llvm-svn: 272978
Switch from m_Constant to m_APInt per David's request. NFC.
Author: Thomas Jablin (tjablin)
Reviewers: majnemer cycheng
http://reviews.llvm.org/D21440
llvm-svn: 272977
This is still NFCI, so the list of clients that allow symbolic stride
speculation does not change (yes: LV and LoopVersioningLICM, no: LLE,
LDist). However since the symbolic strides are now managed by LAA
rather than passed by client a new bool parameter is used to enable
symbolic stride speculation.
The existing test Transforms/LoopVectorize/version-mem-access.ll checks
that stride speculation is performed for LV.
The previously added test Transforms/LoopLoadElim/symbolic-stride.ll
ensures that no speculation is performed for LLE.
The next patch will change the functionality and turn on symbolic stride
speculation in all of LAA's clients and remove the bool parameter.
llvm-svn: 272970
When moving unsafe allocas to the unsafe stack, dbg.declare intrinsics are
updated to refer to the new location.
This change does the same to dbg.value intrinsics.
llvm-svn: 272968
Turns out SymbolicStrides is actually used in canVectorizeWithIfConvert
before it gets set up in canVectorizeMemory.
This works fine as long as SymbolicStrides resides in LV since we just
have an empty map. Based on this the conclusion is made that there are
no symbolic strides which is conservatively correct.
However once SymbolicStrides becomes part of LAI, LAI is nullptr at this
point so we need to differentiate the uninitialized state by returning a
nullptr for SymbolicStrides.
llvm-svn: 272966
Redundant invariant loads can be CSE'ed with very little extra effort
over what early-cse already tracks, so it looks reasonable to make
early-cse handle this case.
llvm-svn: 272954
Daniel Berlin expressed some real concerns about the port and proposed
and alternative approach. I'll revert this for now while working on a
new patch, which I hope to put up for review shortly. Sorry for the churn.
llvm-svn: 272925
We should update results of the BranchProbabilityInfo after removing block in JumpThreading. Otherwise
we will get dangling pointer inside BranchProbabilityInfo cache.
Differential Revision: http://reviews.llvm.org/D20957
llvm-svn: 272891
Added checks to make sure the Scalarizer::transferMetadata() don't
remove valid debug locations from instructions. This is important as
the verifier pass require that e.g. inlinable callsites have a valid
debug location.
https://llvm.org/bugs/show_bug.cgi?id=27938
Patch by Karl-Johan Karlsson
Reviewers: dblaikie
Differential Revision: http://reviews.llvm.org/D20807
llvm-svn: 272884
(i == 5334 || i == 5335)
to:
((i & -2) == 5334)
This transformation has some incorrect side conditions. Specifically, the
transformation is only applied when the right-hand side constant (5334 in
the example) is a power of two not equal and not equal to the negated mask.
These side conditions were added in r258904 to fix PR26323. The correct side
condition is that: ((Constant & Mask) == Constant)[(5334 & -2) == 5334].
It's a little bit hard to see why these transformations are correct and what
the side conditions ought to be. Here is a CVC3 program to verify them for
64-bit values:
ONE : BITVECTOR(64) = BVZEROEXTEND(0bin1, 63);
x : BITVECTOR(64);
y : BITVECTOR(64);
z : BITVECTOR(64);
mask : BITVECTOR(64) = BVSHL(ONE, z);
QUERY( (y & ~mask = y) =>
((x & ~mask = y) <=> (x = y OR x = (y | mask)))
);
Please note that each pattern must be a dual implication (<--> or iff). One
directional implication can create spurious matches. If the implication is
only one-way, an unsatisfiable condition on the left side can imply a
satisfiable condition on the right side. Dual implication ensures that
satisfiable conditions are transformed to other satisfiable conditions and
unsatisfiable conditions are transformed to other unsatisfiable conditions.
Here is a concrete example of a unsatisfiable condition on the left
implying a satisfiable condition on the right:
mask = (1 << z)
(x & ~mask) == y --> (x == y || x == (y | mask))
Substituting y = 3, z = 0 yields:
(x & -2) == 3 --> (x == 3 || x == 2)
The version of this code before r258904 had no side-conditions and
incorrectly justified itself in comments through one-directional
implication.
Thanks to Chandler for the suggestion!
Author: Thomas Jablin (tjablin)
Reviewers: chandlerc majnemer hfinkel cycheng
http://reviews.llvm.org/D21417
llvm-svn: 272873
Summary: This reverts the changes to Globals.cpp and IRMover.cpp in
"[IR] Copy comdats in GlobalObject::copyAttributesFrom" (D20631,
rL270743).
The DeadArgElim test is left unchanged, and we change DAE to explicitly
copy comdats.
The reverted change breaks copyAttributesFrom when the destination lives
in a different module from the source. The decision in D21255 was to
revert this patch and handle comdat copying separately from
copyAttributesFrom.
Reviewers: majnemer, rnk
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D21403
llvm-svn: 272855
LoopVectorizationLegality holds a constant reference to LAI, so this
will have to be const as well.
Also added missed function comment.
llvm-svn: 272851
The error on clang-x86-win2008-selfhost is:
C:\buildbot\slave-config\clang-x86-win2008-selfhost\llvm\lib\Transforms\Vectorize\SLPVectorizer.cpp(955) : error C2248: 'llvm::slpvectorizer::BoUpSLP::ScheduleData' : cannot access private struct declared in class 'llvm::slpvectorizer::BoUpSLP'
C:\buildbot\slave-config\clang-x86-win2008-selfhost\llvm\lib\Transforms\Vectorize\SLPVectorizer.cpp(608) : see declaration of 'llvm::slpvectorizer::BoUpSLP::ScheduleData'
C:\buildbot\slave-config\clang-x86-win2008-selfhost\llvm\lib\Transforms\Vectorize\SLPVectorizer.cpp(337) : see declaration of 'llvm::slpvectorizer::BoUpSLP'
I reproduced this locally with both MSVC 2013 and MSVC 2015.
llvm-svn: 272772
This wasn't failing for me with clang as the compiler. I think GCC may
disagree with clang about whether a friend declaration introduces a
declaration in the enclosing namespace (or something).
Example error:
/home/uweigand/sandbox/buildbot/clang-s390x-linux/llvm/lib/Transforms/Vectorize/SLPVectorizer.cpp:950:77: error: ‘llvm::raw_ostream& llvm::slpvectorizer::operator<<(llvm::raw_ostream&, const llvm::slpvectorizer::BoUpSLP::ScheduleData&)’ should have been declared inside ‘llvm::slpvectorizer’
const BoUpSLP::ScheduleData &SD) {
^
llvm-svn: 272767
This uses the "runImpl" approach to share code with the old PM.
Porting to the new PM meant abandoning the anonymous namespace enclosing
most of SLPVectorizer.cpp which is a bit of a bummer (but not a big deal
compared to having to pull the pass class into a header which the new PM
requires since it calls the constructor directly).
llvm-svn: 272766
r272715 broke libcxx because it did not correctly handle cases where the
last iteration of one IV is the second-to-last iteration of another.
Original commit message:
Vectorizing loops with "escaping" IVs has been disabled since r190790, due to
PR17179. This re-enables it, with support for external use of both
"post-increment" (last iteration) and "pre-increment" (second-to-last iteration)
IVs.
llvm-svn: 272742
We do not support splitting cleanuppad or catchswitches. This is
problematic for passes which assume that a loop is in loop simplify
form (the loop would have a dedicated exit block instead of sharing it).
While it isn't great that we don't support this for cleanups, we still
cannot make loop-simplify form an assertable precondition because
indirectbr will also disable these sorts of CFG cleanups.
This fixes PR28132.
llvm-svn: 272739
Nearly all the changes to this pass have been done while maintaining and
updating other parts of LLVM. LLVM has had another pass, SROA, which
has superseded ScalarReplAggregates for quite some time.
Differential Revision: http://reviews.llvm.org/D21316
llvm-svn: 272737
Vectorizing loops with "escaping" IVs has been disabled since r190790, due to
PR17179. This re-enables it, with support for external use of both
"post-increment" (last iteration) and "pre-increment" (second-to-last iteration)
IVs.
Differential Revision: http://reviews.llvm.org/D21048
llvm-svn: 272715
If a local_unnamed_addr attribute is attached to a global, the address
is known to be insignificant within the module. It is distinct from the
existing unnamed_addr attribute in that it only describes a local property
of the module rather than a global property of the symbol.
This attribute is intended to be used by the code generator and LTO to allow
the linker to decide whether the global needs to be in the symbol table. It is
possible to exclude a global from the symbol table if three things are true:
- This attribute is present on every instance of the global (which means that
the normal rule that the global must have a unique address can be broken without
being observable by the program by performing comparisons against the global's
address)
- The global has linkonce_odr linkage (which means that each linkage unit must have
its own copy of the global if it requires one, and the copy in each linkage unit
must be the same)
- It is a constant or a function (which means that the program cannot observe that
the unique-address rule has been broken by writing to the global)
Although this attribute could in principle be computed from the module
contents, LTO clients (i.e. linkers) will normally need to be able to compute
this property as part of symbol resolution, and it would be inefficient to
materialize every module just to compute it.
See:
http://lists.llvm.org/pipermail/llvm-commits/Week-of-Mon-20160509/356401.htmlhttp://lists.llvm.org/pipermail/llvm-commits/Week-of-Mon-20160516/356738.html
for earlier discussion.
Part of the fix for PR27553.
Differential Revision: http://reviews.llvm.org/D20348
llvm-svn: 272709
We move the loop rotate functions in a separate class to avoid passing multiple
parameters to each function. This cleanup will help with further development of
loop rotation. NFC.
Patch written by Aditya Kumar and Sebastian Pop.
Differential Revision: http://reviews.llvm.org/D21311
llvm-svn: 272672
Ensuring that the PHI are all single-operand is not performed in the
second pass added by the previous pass. This removes the assert from
the first pass.
llvm-svn: 272650
We only used to add the edge from the cloned loop to PHIs that
corresponded to values defined by the loop. We need to do this for all
PHIs obviously since we need a PHI operand for each incoming edge.
This includes things like PHIs with a constant value or with values
defined before the original loop (see the testcases).
After the patch the PHIs are added to the exit block in two passes.
In the first pass we ensure there is a single-operand (LCSSA) PHI for
each value defined by the loop.
In the second pass we loop through each (single-operand) PHI and add the
value for the edge from the cloned loop. If the value is defined in the
loop we'll use the cloned instruction from the cloned loop.
Fixes PR28037
llvm-svn: 272649
The need for all these Lookup* functions is just because of calls to
getAnalysis inside methods (i.e. not at the top level) of the
runOnFunction method. They should be straightforward to clean up when
the old PM is gone.
llvm-svn: 272615
This reverts commit r272603 and adds a fix.
Big thanks to Davide for pointing me at r216244 which gives some insight
into how to fix this VS2013 issue. VS2013 can't synthesize a move
constructor. So the fix here is to add one explicitly to the
JumpThreadingPass class.
llvm-svn: 272607
This follows the approach in r263208 (for GVN) pretty closely:
- move the bulk of the body of the function to the new PM class.
- expose a runImpl method on the new-PM class that takes the IRUnitT and
pointers/references to any analyses and use that to implement the
old-PM class.
- use a private namespace in the header for stuff that used to be file
scope
llvm-svn: 272597
This is a bit gnarly since LVI is maintaining its own cache.
I think this port could be somewhat cleaner, but I'd rather not spend
too much time on it while we still have the old pass hanging around and
limiting how much we can clean things up.
Once the old pass is gone it will be easier (less time spent) to clean
it up anyway.
This is the last dependency needed for porting JumpThreading which I'll
do in a follow-up commit (there's no printer pass for LVI or anything to
test it, so porting a pass that depends on it seems best).
I've been mostly following:
r269370 / D18834 which ported Dependence Analysis
r268601 / D19839 which ported BPI
llvm-svn: 272593
This used to be free, copying and moving DebugLocs became expensive
after the metadata rewrite. Passing by reference eliminates a ton of
track/untrack operations. No functionality change intended.
llvm-svn: 272512
Below are my super rough notes when porting. They can probably serve as
a basic guide for porting other passes to the new PM. As I port more
passes I'll expand and generalize this and make a proper
docs/HowToPortToNewPassManager.rst document. There is also missing
documentation for general concepts and API's in the new PM which will
require some documentation.
Once there is proper documentation in place we can put up a list of
passes that have to be ported and game-ify/crowdsource the rest of the
porting (at least of the middle end; the backend is still unclear).
I will however be taking personal responsibility for ensuring that the
LLD/ELF LTO pipeline is ported in a timely fashion. The remaining passes
to be ported are (do something like
`git grep "<the string in the bullet point below>"` to find the pass):
General Scalar:
[ ] Simplify the CFG
[ ] Jump Threading
[ ] MemCpy Optimization
[ ] Promote Memory to Register
[ ] MergedLoadStoreMotion
[ ] Lazy Value Information Analysis
General IPO:
[ ] Dead Argument Elimination
[ ] Deduce function attributes in RPO
Loop stuff / vectorization stuff:
[ ] Alignment from assumptions
[ ] Canonicalize natural loops
[ ] Delete dead loops
[ ] Loop Access Analysis
[ ] Loop Invariant Code Motion
[ ] Loop Vectorization
[ ] SLP Vectorizer
[ ] Unroll loops
Devirtualization / CFI:
[ ] Cross-DSO CFI
[ ] Whole program devirtualization
[ ] Lower bitset metadata
CGSCC passes:
[ ] Function Integration/Inlining
[ ] Remove unused exception handling info
[ ] Promote 'by reference' arguments to scalars
Please let me know if you are interested in working on any of the passes
in the above list (e.g. reply to the post-commit thread for this patch).
I'll probably be tackling "General Scalar" and "General IPO" first FWIW.
Steps as I port "Deduce function attributes in RPO"
---------------------------------------------------
(note: if you are doing any work based on these notes, please leave a
note in the post-commit review thread for this commit with any
improvements / suggestions / incompleteness you ran into!)
Note: "Deduce function attributes in RPO" is a module pass.
1. Do preparatory refactoring.
Do preparatory factoring. In this case all I had to do was to pull out a static helper (r272503).
(TODO: give more advice here e.g. if pass holds state or something)
2. Rename the old pass class.
llvm/lib/Transforms/IPO/FunctionAttrs.cpp
Rename class ReversePostOrderFunctionAttrs -> ReversePostOrderFunctionAttrsLegacyPass
in preparation for adding a class ReversePostOrderFunctionAttrs as the pass in the new PM.
(edit: actually wait what? The new class name will be
ReversePostOrderFunctionAttrsPass, so it doesn't conflict. So this step is
sort of useless churn).
llvm/include/llvm/InitializePasses.h
llvm/lib/LTO/LTOCodeGenerator.cpp
llvm/lib/Transforms/IPO/IPO.cpp
llvm/lib/Transforms/IPO/FunctionAttrs.cpp
Rename initializeReversePostOrderFunctionAttrsPass -> initializeReversePostOrderFunctionAttrsLegacyPassPass
(note that the "PassPass" thing falls out of `s/ReversePostOrderFunctionAttrs/ReversePostOrderFunctionAttrsLegacyPass/`)
Note that the INITIALIZE_PASS macro is what creates this identifier name, so renaming the class requires this renaming too.
Note that createReversePostOrderFunctionAttrsPass does not need to be
renamed since its name is not generated from the class name.
3. Add the new PM pass class.
In the new PM all passes need to have their
declaration in a header somewhere, so you will often need to add a header.
In this case
llvm/include/llvm/Transforms/IPO/FunctionAttrs.h is already there because
PostOrderFunctionAttrsPass was already ported.
The file-level comment from the .cpp file can be used as the file-level
comment for the new header. You may want to tweak the wording slightly
from "this file implements" to "this file provides" or similar.
Add declaration for the new PM pass in this header:
class ReversePostOrderFunctionAttrsPass
: public PassInfoMixin<ReversePostOrderFunctionAttrsPass> {
public:
PreservedAnalyses run(Module &M, AnalysisManager<Module> &AM);
};
Its name should end with `Pass` for consistency (note that this doesn't
collide with the names of most old PM passes). E.g. call it
`<name of the old PM pass>Pass`.
Also, move the doxygen comment from the old PM pass to the declaration of
this class in the header.
Also, include the declaration for the new PM class
`llvm/Transforms/IPO/FunctionAttrs.h` at the top of the file (in this case,
it was already done when the other pass in this file was ported).
Now define the `run` method for the new class.
The main things here are:
a) Use AM.getResult<...>(M) to get results instead of `getAnalysis<...>()`
b) If the old PM pass would have returned "false" (i.e. `Changed ==
false`), then you should return PreservedAnalyses::all();
c) In the old PM getAnalysisUsage method, observe the calls
`AU.addPreserved<...>();`.
In the case `Changed == true`, for each preserved analysis you should do
call `PA.preserve<...>()` on a PreservedAnalyses object and return it.
E.g.:
PreservedAnalyses PA;
PA.preserve<CallGraphAnalysis>();
return PA;
Note that calls to skipModule/skipFunction are not supported in the new PM
currently, so optnone and optimization bisect support do not work. You can
just drop those calls for now.
4. Add the pass to the new PM pass registry to make it available in opt.
In llvm/lib/Passes/PassBuilder.cpp add a #include for your header.
`#include "llvm/Transforms/IPO/FunctionAttrs.h"`
In this case there is already an include (from when
PostOrderFunctionAttrsPass was ported).
Add your pass to llvm/lib/Passes/PassRegistry.def
In this case, I added
`MODULE_PASS("rpo-functionattrs", ReversePostOrderFunctionAttrsPass())`
The string is from the `INITIALIZE_PASS*` macros used in the old pass
manager.
Then choose a test that uses the pass and use the new PM `-passes=...` to
run it.
E.g. in this case there is a test that does:
; RUN: opt < %s -basicaa -functionattrs -rpo-functionattrs -S | FileCheck %s
I have added the line:
; RUN: opt < %s -aa-pipeline=basic-aa -passes='require<targetlibinfo>,cgscc(function-attrs),rpo-functionattrs' -S | FileCheck %s
The `-aa-pipeline=basic-aa` and
`require<targetlibinfo>,cgscc(function-attrs)` are what is needed to run
functionattrs in the new PM (note that in the new PM "functionattrs"
becomes "function-attrs" for some reason). This is just pulled from
`readattrs.ll` which contains the change from when functionattrs was ported
to the new PM.
Adding rpo-functionattrs causes the pass that was just ported to run.
llvm-svn: 272505
It isn't legal to hoist a load past a call which might not return;
even if it doesn't throw, it could, for example, call exit().
Fixes http://llvm.org/PR27953.
llvm-svn: 272495
Summary:
Make isGuaranteedToExecute use the
isGuaranteedToTransferExecutionToSuccessor helper, and make that helper
a bit more accurate.
There's a potential performance impact here from assuming that arbitrary
calls might not return. This probably has little impact on loads and
stores to a pointer because most things alias analysis can reason about
are dereferenceable anyway. The other impacts, like less aggressive
hoisting of sdiv by a variable and less aggressive hoisting around
volatile memory operations, are unlikely to matter for real code.
This also impacts SCEV, which uses the same helper. It's a minor
improvement there because we can tell that, for example, memcpy always
returns normally. Strictly speaking, it's also introducing
a bug, but it's not any worse than everywhere else we assume readonly
functions terminate.
Fixes http://llvm.org/PR27857.
Reviewers: hfinkel, reames, chandlerc, sanjoy
Subscribers: broune, llvm-commits
Differential Revision: http://reviews.llvm.org/D21167
llvm-svn: 272489
Summary:
Dominator updation fails for a loop inserted with a new basicblock.
A block required by DT to set the IDom might not have been cloned yet. This is because there is no predefined ordering of loop blocks (except for the header block which should be the first block in the list).
The patch first creates DT nodes for the cloned blocks and then separately updates the DT in a follow-on loop.
Reviewers: anemet, dberlin
Subscribers: dberlin, llvm-commits
Differential Revision: http://reviews.llvm.org/D20899
llvm-svn: 272479
Summary:
Iterates all (except the first and the last) operands within each GEP
instruction for instrumentation.
Adds test struct_field_gep.ll.
Reviewers: aizatsky
Subscribers: vitalybuka, zhaoqin, kcc, eugenis, bruening, llvm-commits
Differential Revision: http://reviews.llvm.org/D21242
llvm-svn: 272442
Summary:
I can't find a case where we can rotate a loop more than once, and it looks
like we never do this. To rotate a loop following conditions should be met:
1) its header should be exiting
2) its latch shouldn't be exiting
But after the first rotation the header becomes the new latch, so this
condition can never be true any longer.
Tested on with an assert on LNT testsuite and make check.
Reviewers: hfinkel, sanjoy
Subscribers: sebpop, sanjoy, llvm-commits, mzolotukhin
Differential Revision: http://reviews.llvm.org/D20181
llvm-svn: 272439
A memory access defined on function entry cannot be locally dominated by another memory access.
The patch was split from http://reviews.llvm.org/D19338 which exposes the problem.
Differential Revision: http://reviews.llvm.org/D21039
llvm-svn: 272436
Loop unswitching may cause MSan false positive when the unswitch
condition is not guaranteed to execute.
This is very similar to ASan and TSan special case in
llvm::isSafeToSpeculativelyExecute (they don't like speculative loads
and stores), but for branch instructions.
This is a workaround for PR28054.
llvm-svn: 272421
Summary:
Adds ClInstrumentFastpath option to control fastpath instrumentation.
Avoids the load/store instrumentation for the cache fragmentation tool.
Renames cache_frag_basic.ll to working_set_slow.ll for slowpath
instrumentation test.
Adds the __esan_init check in struct_field_count_basic.ll.
Reviewers: aizatsky
Subscribers: llvm-commits, bruening, eugenis, kcc, zhaoqin, vitalybuka
Differential Revision: http://reviews.llvm.org/D21079
llvm-svn: 272355
Summary:
We failed to unpoison uninteresting allocas on return as unpoisoning is part of
main instrumentation which skips such allocas.
Added check -asan-instrument-allocas for dynamic allocas. If instrumentation of
dynamic allocas is disabled it will not will not be unpoisoned.
PR27453
Reviewers: kcc, eugenis
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D21207
llvm-svn: 272341
Summary:
We still want to unpoison full stack even in use-after-return as it can be disabled at runtime.
PR27453
Reviewers: eugenis, kcc
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D21202
llvm-svn: 272334
Instead of directly using MaxFunctionCount and function entry count to determine callee hotness, use the isHotFunction/isColdFunction methods provided by ProfileSummaryInfo.
Differential revision: http://reviews.llvm.org/D21045
llvm-svn: 272321
Previously, we materialized secondary vector IVs from the primary scalar IV,
by offseting the primary to match the correct start value, and then broadcasting
it - inside the loop body. Instead, we can use a real vector IV, like we do for
the primary.
This enables using vector IVs for secondary integer IVs whose type matches the
type of the primary.
Differential Revision: http://reviews.llvm.org/D20932
llvm-svn: 272283
Summary:
This fixes PR26682. Also add LCSSA as a preserved pass to LoopSimplify,
that looks correct to me and allows to write a test for the issue.
Reviewers: chandlerc, bogner, sanjoy
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D21112
llvm-svn: 272224
Summary:
This fixes PR27617.
Bug description: The SLPVectorizer asserts on encountering GEPs with different index types, such as i8 and i64.
The patch includes a simple relaxation of the assert to allow constants being of different types, along with a regression test that will provoke the unrelaxed assert.
Reviewers: nadav, mzolotukhin
Subscribers: JesperAntonsson, llvm-commits, mzolotukhin
Differential Revision: http://reviews.llvm.org/D20685
Patch by Jesper Antonsson!
llvm-svn: 272206
with user specified count has been applied.
Summary:
Previously SetLoopAlreadyUnrolled() set the disable pragma only if
there was some loop metadata.
Now it set the pragma in all cases. This helps to prevent multiple
unroll when -unroll-count=N is given.
Reviewers: mzolotukhin
Differential Revision: http://reviews.llvm.org/D20765
From: Evgeny Stupachenko <evstupac@gmail.com>
llvm-svn: 272195
As suggested by clang-tidy's performance-unnecessary-copy-initialization.
This can easily hit lifetime issues, so I audited every change and ran the
tests under asan, which came back clean.
llvm-svn: 272126
Unlike native shifts, the AVX2 per-element shift instructions VPSRAV/VPSRLV/VPSLLV handle out of range shift values (logical shifts set the result to zero, arithmetic shifts splat the sign bit).
If the shift amount is constant we can sometimes convert these instructions to native shifts:
1 - if all shift amounts are in range then the conversion is trivial.
2 - out of range arithmetic shifts can be clamped to the (bitwidth - 1) (a legal shift amount) before conversion.
3 - logical shifts just return zero if all elements have out of range shift amounts.
In addition, UNDEF shift amounts are handled - either as an UNDEF shift amount in a native shift or as an UNDEF in the logical 'all out of range' zero constant special case for logical shifts.
Differential Revision: http://reviews.llvm.org/D19675
llvm-svn: 271996
This patch adds support for folding undef/zero/constant inputs to MOVMSK instructions.
The SSE/AVX versions can be fully folded, but the MMX version can only handle undef inputs.
Differential Revision: http://reviews.llvm.org/D20998
llvm-svn: 271990
scalarizePHI only looked for phis that have exactly two uses - the "latch"
use, and an extract. Unfortunately, we can not assume all equivalent extracts
are CSE'd, since InstCombine itself may create an extract which is a duplicate
of an existing one. This extends it to handle several distinct extracts from
the same index.
This should fix at least some of the performance regressions from PR27988.
Differential Revision: http://reviews.llvm.org/D20983
llvm-svn: 271961
Summary:
Fix LSRInstance::HoistInsertPosition() to check the original insert
position block first for a canonical insertion point that is dominated
by all inputs. This leads to SCEV being able to reuse more instructions
since it currently tracks the instructions it creates for reuse by
keeping a table of <Value, insert point> pairs.
Originally reviewed in http://reviews.llvm.org/D18001
Reviewers: atrick
Subscribers: llvm-commits, mzolotukhin, mcrosier
Differential Revision: http://reviews.llvm.org/D18480
llvm-svn: 271929
In r271810 ( http://reviews.llvm.org/rL271810 ), I loosened the check
above this to work for any Constant rather than ConstantInt. AFAICT,
that part makes sense if we can determine that the shrunken/extended
constant remained equal. But it doesn't make sense for this later
transform where we assume that the constant DID change.
This could assert for a ConstantExpr:
https://llvm.org/bugs/show_bug.cgi?id=28011
And it could be wrong for a vector as shown in the added regression test.
llvm-svn: 271908
Summary:
This hasn't been caught before because it requires noalias or similarly
strong alias analysis to actually reproduce.
Fixes http://llvm.org/PR27952 .
Reviewers: hfinkel, sanjoy
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D20944
llvm-svn: 271858
Since FoldOpIntoPhi speculates the binary operation to potentially each
of the predecessors of the PHI node (pulling it out of arbitrary control
dependence in the process), we can FoldOpIntoPhi only if we know the
operation doesn't have UB.
This also brings up an interesting profitability question -- the way it
is written today, commonIRemTransforms will hoist out work from
dynamically dead code into code that will execute at runtime. Perhaps
that isn't the best canonicalization?
Fixes PR27968.
llvm-svn: 271857
Summary:
There are some rough corners, since the new pass manager doesn't have
(as far as I can tell) LoopSimplify and LCSSA, so I've updated the
tests to run them separately in the old pass manager in the lit tests.
We also don't have an equivalent for AU.setPreservesCFG() in the new
pass manager, so I've left a FIXME.
Reviewers: bogner, chandlerc, davide
Subscribers: sanjoy, mcrosier, llvm-commits
Differential Revision: http://reviews.llvm.org/D20783
llvm-svn: 271846
Change the name of the ICmpInst to 'ICmp' and the Constant (was a ConstantInt) to 'C',
so that it's hopefully clearer that 'CI' refers to CastInst in this context.
While we're scrubbing, fix the documentation comment and use 'auto' with 'dyn_cast'.
llvm-svn: 271817
A basic block could contain:
%cp = cleanuppad []
cleanupret from %cp unwind to caller
This basic block is empty and is thus a candidate for removal. However,
there can be other uses of %cp outside of this basic block. This is
only possible in unreachable blocks.
Make our transform more correct by checking that the pad has a single
user before removing the BB.
This fixes PR28005.
llvm-svn: 271816
Add the MMX implementation to the SimplifyDemandedUseBits SSE/AVX MOVMSK support added in D19614
Requires a minor tweak as llvm.x86.mmx.pmovmskb takes a x86_mmx argument - so we have to be explicit about the implied v8i8 vector type.
llvm-svn: 271789
Summary:
Adds an option -esan-assume-intra-cache-line which causes esan to assume
that a single memory access touches just one cache line, even if it is not
aligned, for better performance at a potential accuracy cost. Experiments
show that the performance difference can be 2x or more, and accuracy loss
is typically negligible, so we turn this on by default. This currently
applies just to the working set tool.
Reviewers: aizatsky
Subscribers: vitalybuka, zhaoqin, kcc, eugenis, llvm-commits
Differential Revision: http://reviews.llvm.org/D20978
llvm-svn: 271743
Summary:
Adds a global variable to specify the tool, to support handling early
interceptors that invoke instrumented code and require shadow memory to be
initialized prior to __esan_init() being invoked.
Reviewers: aizatsky
Subscribers: vitalybuka, zhaoqin, kcc, eugenis, llvm-commits
Differential Revision: http://reviews.llvm.org/D20973
llvm-svn: 271715
There was concern that creating bitcasts for the simpler potential select pattern:
define <2 x i64> @vecBitcastOp1(<4 x i1> %cmp, <2 x i64> %a) {
%a2 = add <2 x i64> %a, %a
%sext = sext <4 x i1> %cmp to <4 x i32>
%bc = bitcast <4 x i32> %sext to <2 x i64>
%and = and <2 x i64> %a2, %bc
ret <2 x i64> %and
}
might lead to worse code for some targets, so this patch is matching the larger
patterns seen in the test cases.
The motivating example for this patch is this IR produced via SSE intrinsics in C:
define <2 x i64> @gibson(<2 x i64> %a, <2 x i64> %b) {
%t0 = bitcast <2 x i64> %a to <4 x i32>
%t1 = bitcast <2 x i64> %b to <4 x i32>
%cmp = icmp sgt <4 x i32> %t0, %t1
%sext = sext <4 x i1> %cmp to <4 x i32>
%t2 = bitcast <4 x i32> %sext to <2 x i64>
%and = and <2 x i64> %t2, %a
%neg = xor <4 x i32> %sext, <i32 -1, i32 -1, i32 -1, i32 -1>
%neg2 = bitcast <4 x i32> %neg to <2 x i64>
%and2 = and <2 x i64> %neg2, %b
%or = or <2 x i64> %and, %and2
ret <2 x i64> %or
}
For an AVX target, this is currently:
vpcmpgtd %xmm1, %xmm0, %xmm2
vpand %xmm0, %xmm2, %xmm0
vpandn %xmm1, %xmm2, %xmm1
vpor %xmm1, %xmm0, %xmm0
retq
With this patch, it becomes:
vpmaxsd %xmm1, %xmm0, %xmm0
Differential Revision: http://reviews.llvm.org/D20774
llvm-svn: 271676
Summary:
Instrument GEP instruction for counting the number of struct field
address calculation to approximate the number of struct field accesses.
Adds test struct_field_count_basic.ll to test the struct field
instrumentation.
Reviewers: bruening, aizatsky
Subscribers: junbuml, zhaoqin, llvm-commits, eugenis, vitalybuka, kcc, bruening
Differential Revision: http://reviews.llvm.org/D20892
llvm-svn: 271619
In r270478, where I enabled the new heuristic I posted testing results,
which I got when explicitly passed the thresholds values via CL options.
However, setting the CL options init-values is not enough to change the
default values of thresholds, so I'm changing them in another place now.
llvm-svn: 271615
In preparation for porting to the new PM.
Patch by Jake VanAdrighem! (review mainly by me/Justin)
Differential Revision: http://reviews.llvm.org/D20610
llvm-svn: 271607
Summary:
The module pass pipeline includes a late LICM run after loop
unrolling. LCSSA is implicitly run as a pass dependency of LICM. However no
cleanup pass was run after this, so the LCSSA nodes ended in the optimized output.
Reviewers: hfinkel, mehdi_amini
Subscribers: majnemer, bruno, mzolotukhin, mehdi_amini, llvm-commits
Differential Revision: http://reviews.llvm.org/D20606
llvm-svn: 271602
Matt Arsenault