Rename SDOperandImpl back to SDOperand.
Introduce the SDUse class that represents a use of the SDNode referred by
an SDOperand. Now it is more similar to Use/Value classes.
Patch is approved by Dan Gohman.
llvm-svn: 49795
ScheduleDAG; they don't correspond to any actual instructions so they
don't need to be scheduled.
This fixes a bug where the EntryToken was being scheduled multiple
times in some cases, though it ended up not causing any trouble because
EntryToken doesn't expand into anything. With this fixed the schedulers
reliably schedule the expected number of units, so we can check this
with an assertion.
This requires a tweak to test/CodeGen/X86/loop-hoist.ll because it
ends up getting scheduled differently in a trivial way, though it was
enough to fool the prcontext+grep that the test does.
llvm-svn: 49701
much simpler than in LegalizeDAG because calls are
not yet expanded into call sequences: that happens
after type legalization has finished.
llvm-svn: 49634
in its maps. Add some sanity checks that catch
this kind of thing. Hopefully these can be
removed one day (once all problems are fixed!)
but for the moment it seems wise to have them in.
llvm-svn: 49612
on any current target and aren't optimized in DAGCombiner. Instead
of using intermediate nodes, expand the operations, choosing between
simple loads/stores, target-specific code, and library calls,
immediately.
Previously, the code to emit optimized code for these operations
was only used at initial SelectionDAG construction time; now it is
used at all times. This fixes some cases where rep;movs was being
used for small copies where simple loads/stores would be better.
This also cleans up code that checks for alignments less than 4;
let the targets make that decision instead of doing it in
target-independent code. This allows x86 to use rep;movs in
low-alignment cases.
Also, this fixes a bug that resulted in the use of rep;stos for
memsets of 0 with non-constant memory size when the alignment was
at least 4. It's better to use the library in this case, which
can be significantly faster when the size is large.
This also preserves more SourceValue information when memory
intrinsics are lowered into simple loads/stores.
llvm-svn: 49572
before an invoke. Failure to do this causes references in
the landing pad to variables that were not set. Fixes
g++.dg/eh/delayslot1.C
g++.dg/eh/fp-regs.C
g++.old-deja/g++.brendan/eh1.C
llvm-svn: 49243
There is no point in creating a long live range defined by an implicit_def. Scheduler now duplicates implicit_def instruction for each of its uses. Therefore, if an implicit_def node has multiple uses, it will become a number of very short live ranges, rather than a long one. This will make coalescer's job easier.
llvm-svn: 49164
review feedback.
-enable-eh is still accepted but doesn't do anything.
EH intrinsics use Dwarf EH if the target supports that,
and are handled by LowerInvoke otherwise.
The separation of the EH table and frame move data is,
I think, logically figured out, but either one still
causes full EH info to be generated (not sure how to
split the metadata correctly).
MachineModuleInfo::needsFrameInfo is no longer used and
is removed.
llvm-svn: 49064
not marked nounwind, or for all functions when -enable-eh
is set, provided the target supports Dwarf EH.
llvm-gcc generates nounwind in the right places; other FEs
will need to do so also. Given such a FE, -enable-eh should
no longer be needed.
llvm-svn: 49006
In order to handle indexed nodes I had to introduce
a new constructor, and since I was there I factorized
the code in the various load constructors.
llvm-svn: 48894
nodes. This doesn't currently have much impact the generated code, but it
does produce simpler-looking SelectionDAGs, and consequently
simpler-looking ScheduleDAGs, because there are fewer spurious
dependencies.
In particular, CopyValueToVirtualRegister now uses the entry node as the
input chain dependency for new CopyToReg nodes instead of calling getRoot
and depending on the most recent memory reference.
Also, rename UnorderedChains to PendingExports and pull it up from being
a local variable in SelectionDAGISel::BuildSelectionDAG to being a
member variable of SelectionDAGISel, so that it doesn't have to be
passed around to all the places that need it.
llvm-svn: 48893
called LimitedSumOfUnscheduledPredsOfSuccs. It terminates the computation
after a given treshold is reached. This new function is always faster, but
brings real wins only on bigger test-cases.
The old function SumOfUnscheduledPredsOfSuccs is left in-place for now and therefore a warning about an unused static function is produced.
llvm-svn: 48872
LLVM Value/Use does and MachineRegisterInfo/MachineOperand does.
This allows constant time for all uses list maintenance operations.
The idea was suggested by Chris. Reviewed by Evan and Dan.
Patch is tested and approved by Dan.
On normal use-cases compilation speed is not affected. On very big basic
blocks there are compilation speedups in the range of 15-20% or even better.
llvm-svn: 48822
This fixes Bugzilla #1835 (http://llvm.org/bugs/show_bug.cgi?id=1835).
This patched is reviewed by Tanya and Dan. Dan tested and approved it.
The reason for the bad performance of the old algorithm is that it is very naive and scans every
time all nodes of the DAG in the worst case.
This patch introduces a new algorithm based on the paper "Online algorithms
for maintaining the topological order of a directed acyclic graph" by
David J.Pearce and Paul H.J.Kelly. This is the MNR algorithm. It has a
linear time worst-case and performs much better in most situations.
The paper can be found here:
http://fano.ics.uci.edu/cites/Document/Online-algorithms-for-maintaining-the-topological-order-of-a-directed-acyclic-graph.html
The main idea of the new algorithm is to compute the topological ordering of the SNodes in the
DAG and to maintain it even after DAG modifications. The topological ordering allows for very fast
node reachability checks.
Tests on very big input files with tens of thousands of instructions in a BB indicate huge
speed-ups (up to 10x compilation time improvement) compared to the old version.
llvm-svn: 48817
With this pass, StrongPHIElim can compile very simple testcases correctly. There's still a ways
to go before it's ready for prime time, though.
llvm-svn: 48719
flags. This is needed by the new legalize types
infrastructure which wants to expand the 64 bit
constants previously used to hold the flags on
32 bit machines. There are two functional changes:
(1) in LowerArguments, if a parameter has the zext
attribute set then that is marked in the flags;
before it was being ignored; (2) PPC had some bogus
code for handling two word arguments when using the
ELF 32 ABI, which was hard to convert because of
the bogusness. As suggested by the original author
(Nicolas Geoffray), I've disabled it for the moment.
Tested with "make check" and the Ada ACATS testsuite.
llvm-svn: 48640
1. If part of a register is re-defined, an implicit kill and an implicit def are added to denote read / mod / write. However, this should only be necessary if the register is actually read later. This is a performance issue.
2. If a sub-register is being defined, and it doesn't have a previous use, do not add a implicit kill to the last use of a super-register:
= EAX, AX<imp-use,kill>
...
AX =
In this case, EAX is live but AX is killed, this is wrong and will cause the coalescer to do bad things.
llvm-svn: 48521
the fcopysign expansion from LegalizeDAG to get rid of
what seems to be a bug: the use of sign extension means
that when copying the sign bit from an f32 to an f64,
the upper 32 bits of the f64 (now an i64) are set, not
just the top bit... I also generalized it to work for
any sized floating point types, and removed the bogosity:
SDOperand Mask1 = (SrcVT == MVT::f64)
? DAG.getConstantFP(BitsToDouble(1ULL << 63), SrcVT)
: DAG.getConstantFP(BitsToFloat(1U << 31), SrcVT);
Mask1 = DAG.getNode(ISD::BIT_CONVERT, SrcNVT, Mask1);
(here SrcNVT is an integer with the same size as SrcVT).
As far as I can see this takes a 1 << 63, converts to
a double, converts that to a floating point constant
then converts that to an integer constant, ending up
with... 1 << 63 as an integer constant! So I just
generate this integer constant directly.
llvm-svn: 48305
getCopyToParts problem was noticed by the new
LegalizeTypes infrastructure. In order to avoid
this kind of thing in the future I've added a
check that EXTRACT_ELEMENT is only used with
integers. Once LegalizeTypes is up and running
most likely BUILD_PAIR and EXTRACT_ELEMENT can
be removed, in favour of using apints instead.
llvm-svn: 48294
X86 lowering normalize vector 0 to v4i32. However DAGCombine can fold (sub x, x) -> 0 after legalization. It can create a zero vector of a type that's not expected (e.g. v8i16). We don't want to disable the optimization since leaving a (sub x, x) is really bad. Add isel patterns for other types of vector 0 to ensure correctness. It's highly unlikely to happen other than in bugpoint reduced test cases.
llvm-svn: 48279
that merely add passes. This allows them to be used with either
FunctionPassManager or PassManager, or even with a custom new
kind of pass manager.
llvm-svn: 48256
Nicolas Geoffray