As a result of the underlying cause of PR41678 we created an ANY_EXTEND node with a scalar result type and v1i1 input type. Ideally we would have asserted for this instead of letting it go through to instruction selection and generate bad machine IR
Differential Revision: https://reviews.llvm.org/D61463
llvm-svn: 359836
The original patch was committed at rL359398 and reverted at rL359695 because of
infinite looping.
This includes a fix to check for a vector splat of "1.0" to avoid the infinite loop.
Original commit message:
This was originally part of D61028, but it's an independent diff.
If we try the repeated divisor reciprocal transform before producing an estimate sequence,
then we have an opportunity to use scalar fdiv. On x86, the trade-off is 1 divss vs. 5
vector FP ops in the default estimate sequence. On recent chips (Skylake, Ryzen), the
full-precision division is only 3 cycle throughput, so that's probably the better perf
default option and avoids problems from x86's inaccurate estimates.
The last 2 tests show that users still have the option to override the defaults by using
the function attributes for reciprocal estimates, but those patterns are potentially made
faster by converting the vector ops (including ymm ops) to scalar math.
Differential Revision: https://reviews.llvm.org/D61149
llvm-svn: 359793
We don't have FP exception limits in the IR constant folder for the binops (apart from strict ops),
so it does not make sense to have them here in the DAG either. Nothing else in the backend tries
to preserve exceptions (again outside of strict ops), so I don't see how this could have ever
worked for real code that cares about FP exceptions.
There are still cases (examples: unary opcodes in SDAG, FMA in IR) where we are trying (at least
partially) to preserve exceptions without even asking if the target supports FP exceptions. Those
should be corrected in subsequent patches.
Real support for FP exceptions requires several changes to handle the constrained/strict FP ops.
Differential Revision: https://reviews.llvm.org/D61331
llvm-svn: 359791
In preparation for supporting ILP32 on AArch64, this modifies the SelectionDAG
builder code so that pointers are allowed to have a larger type when "live" in
the DAG compared to memory.
Pointers get zero-extended whenever they are loaded, and truncated prior to
stores. In addition, a few not quite so obvious locations need updating:
* A GEP that has not been marked inbounds needs to enforce the IR-documented
2s-complement wrapping at the memory pointer size. Inbounds GEPs are
undefined if they overflow the address space, so no additional operations
are needed.
* Signed comparisons would give incorrect results if performed on the
zero-extended values.
This shouldn't affect CodeGen for now, but will become active when the AArch64
ILP32 support is committed.
llvm-svn: 359676
We don't have this restriction in IR, so it should not be here
either simply out of consistency. Code that wants to handle FP
exceptions is expected to use the 'strict' variants of these
nodes.
We don't get the frem case because frem by 0.0 produces NaN (invalid),
and that's the remaining check here (so the removed check for frem
was dead code AFAIK).
This is the only place in SDAG that uses "HasFPExceptions", so I
think we should remove that entirely as a follow-up patch.
llvm-svn: 359566
This was a local static funtion in SelectionDAG, which I've promoted to
TargetLowering so that I can reuse it to estimate the cost of a memory
operation in D59787.
Differential Revision: https://reviews.llvm.org/D59766
llvm-svn: 359543
The MachineFunction wasn't used in getOptimalMemOpType, but more importantly,
this allows reuse of findOptimalMemOpLowering that is calling getOptimalMemOpType.
This is the groundwork for the changes in D59766 and D59787, that allows
implementation of TTI::getMemcpyCost.
Differential Revision: https://reviews.llvm.org/D59785
llvm-svn: 359537
Do not combine (trunc adde(X, Y, Carry)) into (adde trunc(X), trunc(Y), Carry),
if adde is not legal for the target. Even it's at type-legalize phase.
Because adde is special and will not be legalized at operation-legalize phase later.
This fixes: PR40922
https://bugs.llvm.org/show_bug.cgi?id=40922
Differential Revision: https://reviews.llvm.org//D60854
llvm-svn: 359532
Summary:
Extract the logic for doing reassociations
from DAGCombiner::reassociateOps into a helper
function DAGCombiner::reassociateOpsCommutative,
and use that helper to trigger reassociation
on the original operand order, or the commuted
operand order.
Codegen is not identical since the operand order will
be different when doing the reassociations for the
commuted case. That causes some unfortunate churn in
some test cases. Apart from that this should be NFC.
Reviewers: spatel, craig.topper, tstellar
Reviewed By: spatel
Subscribers: dmgreen, dschuff, jvesely, nhaehnle, javed.absar, sbc100, jgravelle-google, hiraditya, aheejin, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D61199
llvm-svn: 359476
This was originally part of D61028, but it's an independent diff.
If we try the repeated divisor reciprocal transform before producing an estimate sequence,
then we have an opportunity to use scalar fdiv. On x86, the trade-off is 1 divss vs. 5
vector FP ops in the default estimate sequence. On recent chips (Skylake, Ryzen), the
full-precision division is only 3 cycle throughput, so that's probably the better perf
default option and avoids problems from x86's inaccurate estimates.
The last 2 tests show that users still have the option to override the defaults by using
the function attributes for reciprocal estimates, but those patterns are potentially made
faster by converting the vector ops (including ymm ops) to scalar math.
Differential Revision: https://reviews.llvm.org/D61149
llvm-svn: 359398
As detailed on PR40758, Bobcat/Jaguar can perform vector immediate shifts on the same pipes as vector ANDs with the same latency - so it doesn't make sense to replace a shl+lshr with a shift+and pair as it requires an additional mask (with the extra constant pool, loading and register pressure costs).
Differential Revision: https://reviews.llvm.org/D61068
llvm-svn: 359293
We had special case handling here, but it uses a scalar any_extend for the
promotion then bitcasts to the final type. This won't split up the input data
into multiple promoted elements like we need.
This patch falls back to doing the conversion through memory.
Fixes PR41594 which I believe was reflected in the bitcast-vector-bool.ll
changes. The changes to vector-half-conversions.ll are fixing a previously
unknown miscompile from this issue.
Differential Revision: https://reviews.llvm.org/D61114
llvm-svn: 359219
Summary:
This emits labels around heapallocsite calls and S_HEAPALLOCSITE debug
info in codeview. Currently only changes FastISel, so emitting labels still
needs to be implemented in SelectionDAG.
Reviewers: rnk
Subscribers: aprantl, hiraditya, cfe-commits, llvm-commits
Tags: #clang, #llvm
Differential Revision: https://reviews.llvm.org/D61083
llvm-svn: 359149
If we have a vector FP division with a splatted divisor, use the existing transform
that converts 'x/y' into 'x * (1.0/y)' to allow more conversions. This can then
potentially be converted into a scalar FP division by existing combines (rL358984)
as seen in the tests here.
That can be a potentially big perf difference if scalar fdiv has better timing
(including avoiding possible frequency throttling for vector ops).
Differential Revision: https://reviews.llvm.org/D61028
llvm-svn: 359147
Summary:
Both the input Value pointer and the returned Value
pointers in GetUnderlyingObjects are now declared as
const.
It turned out that all current (in-tree) uses of
GetUnderlyingObjects were trivial to update, being
satisfied with have those Value pointers declared
as const. Actually, in the past several of the users
had to use const_cast, just because of ValueTracking
not providing a version of GetUnderlyingObjects with
"const" Value pointers. With this patch we get rid
of those const casts.
Reviewers: hfinkel, materi, jkorous
Reviewed By: jkorous
Subscribers: dexonsmith, jkorous, jholewinski, sdardis, eraman, hiraditya, jrtc27, atanasyan, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D61038
llvm-svn: 359072
If we only match build vectors, we can miss some patterns
that use shuffles as seen in the affected tests.
Note that the underlying calls within getSplatSourceVector()
have the potential for compile-time explosion because of
exponential recursion looking through binop opcodes, but
currently the list of supported opcodes is very limited.
Both of those problems should be addressed in follow-up
patches.
llvm-svn: 358984
Summary:
The DAGCombiner is rewriting (canonicalizing) an ISD::ADD
with no common bits set in the operands as an ISD::OR node.
This could sometimes result in "missing out" on some
combines that normally are performed for ADD. To be more
specific this could happen if we already have rewritten an
ADD into OR, and later (after legalizations or combines)
we expose patterns that could have been optimized if we
had seen the OR as an ADD (e.g. reassociations based on ADD).
To make the DAG combiner less sensitive to if ADD or OR is
used for these "no common bits set" ADD/OR operations we
now apply most of the ADD combines also to an OR operation,
when value tracking indicates that the operands have no
common bits set.
Reviewers: spatel, RKSimon, craig.topper, kparzysz
Reviewed By: spatel
Subscribers: arsenm, rampitec, lebedev.ri, jvesely, nhaehnle, hiraditya, javed.absar, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D59758
llvm-svn: 358965
This was supposed to be NFC, but the change in SDLoc
definitions causes instruction scheduling changes.
There's nothing x86-specific in this code, and it can
likely be used from DAGCombiner's simplifyVBinOp().
llvm-svn: 358930
This patch adds support for BigBitWidth -> SmallBitWidth bitcasts, splitting the DemandedBits/Elts accordingly.
The AMDGPU backend needed an extra (srl (and x, c1 << c2), c2) -> (and (srl(x, c2), c1) combine to encourage BFE creation, I investigated putting this in DAGCombine but it caused a lot of noise on other targets - some improvements, some regressions.
The X86 changes are all definite wins.
Differential Revision: https://reviews.llvm.org/D60462
llvm-svn: 358887
Summary:
This emits labels around heapallocsite calls and S_HEAPALLOCSITE debug
info in codeview. Currently only changes FastISel, so emitting labels still
needs to be implemented in SelectionDAG.
Reviewers: hans, rnk
Subscribers: aprantl, hiraditya, cfe-commits, llvm-commits
Tags: #clang, #llvm
Differential Revision: https://reviews.llvm.org/D60800
llvm-svn: 358783
These are general queries, so they should not die when given
a degenerate input like an all undef mask. Callers should be
able to deal with an op that will eventually be simplified away.
llvm-svn: 358761
Currently there is a single point in ScheduleDAGRRList, where we
actually query the topological order (besides init code). Currently we
are recomputing the order after adding a node (which does not have
predecessors) and then we add predecessors edge-by-edge.
We can avoid adding edges one-by-one after we added a new node. In that case, we can
just rebuild the order from scratch after adding the edges to the DAG
and avoid all the updates to the ordering.
Also, we can delay updating the DAG until we query the DAG, if we keep a
list of added edges. Depending on the number of updates, we can either
apply them when needed or recompute the order from scratch.
This brings down the geomean compile time for of CTMark with -O1 down 0.3% on X86,
with no regressions.
Reviewers: MatzeB, atrick, efriedma, niravd, paquette
Reviewed By: efriedma
Differential Revision: https://reviews.llvm.org/D60125
llvm-svn: 358583
As discussed on PR41359, this patch renames the pair of shift-mask target feature functions to make their purposes more obvious.
shouldFoldShiftPairToMask -> shouldFoldConstantShiftPairToMask
preferShiftsToClearExtremeBits -> shouldFoldMaskToVariableShiftPair
llvm-svn: 358526
The checks in `canFoldInAddressingMode` tested for addressing modes that have a
base register but didn't set the `HasBaseReg` flag to true (it's false by
default). This patch fixes that. Although the omission of the flag was
technically incorrect it had no known observable impact, so no tests were
changed by this patch.
Differential Revision: https://reviews.llvm.org/D60314
llvm-svn: 358502
Arguments already have a flag to inform backends when they have been split up.
The AArch64 arm64_32 ABI makes use of these on return types too, so that code
emitted for armv7k can be ABI-compliant.
There should be no CodeGen changes yet, just making more information available.
llvm-svn: 358399
The arm64_32 ABI specifies that pointers (despite being 32-bits) should be
zero-extended to 64-bits when passed in registers for efficiency reasons. This
means that the SelectionDAG needs to be able to tell the backend that an
argument was originally a pointer, which is implmented here.
Additionally, some memory intrinsics need to be declared as taking an i8*
instead of an iPTR.
There should be no CodeGen change yet, but it will be triggered when AArch64
backend support for ILP32 is added.
llvm-svn: 358398
Summary:
Use KnownBits::computeForAddSub/computeForAddCarry
in SelectionDAG::computeKnownBits when doing value
tracking for addition/subtraction.
This should improve the precision of the known bits,
as we only used to make a simple estimate of known
zeroes. The KnownBits support functions are also
able to deduce bits that are known to be one in the
result.
Reviewers: spatel, RKSimon, nikic, lebedev.ri
Reviewed By: nikic
Subscribers: nikic, javed.absar, lebedev.ri, hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D60460
llvm-svn: 358372
// shuffle (concat X, undef), (concat Y, undef), Mask -->
// concat (shuffle X, Y, Mask0), (shuffle X, Y, Mask1)
The ARM changes with 'vtrn' and narrowed 'vuzp' are improvements.
The x86 changes look neutral or better. There's one test with an
extra instruction, but that could be reversed for a subtarget with
the right attributes. But by default, we want to avoid the 256-bit
op when possible (in my motivating benchmark, a handful of ymm ops
sprinkled into a sequence of xmm ops are triggering frequency
throttling on Haswell resulting in significantly worse perf).
Differential Revision: https://reviews.llvm.org/D60545
llvm-svn: 358291
If the upper bits of the SHL result aren't used, we might be able to use a narrower shift. For example, on X86 this can turn a 64-bit into 32-bit enabling a smaller encoding.
Differential Revision: https://reviews.llvm.org/D60358
llvm-svn: 358257
// bo (build_vec ...undef, x, undef...), (build_vec ...undef, y, undef...) -->
// build_vec ...undef, (bo x, y), undef...
The lifetime of the nodes in these examples is different for variables versus constants,
but they are all build vectors briefly, so I'm proposing to catch them in this form to
handle all of the leading examples in the motivating test file.
Before we have build vectors, we might have insert_vector_element. After that, we might
have scalar_to_vector and constant pool loads.
It's going to take more work to ensure that FP vector operands are getting simplified
with undef elements, so this transform can apply more widely. In a non-loose FP environment,
we are likely simplifying FP elements to NaN values rather than undefs.
We also need to allow more opcodes down this path. Eg, we don't handle FP min/max flavors
yet.
Differential Revision: https://reviews.llvm.org/D60514
llvm-svn: 358172
Certain optimisations from ConstantHoisting and CGP rely on Selection DAG not
seeing through to the constant in other blocks. Revert this patch while we come
up with a better way to handle that.
I will try to follow this up with some better tests.
llvm-svn: 358113
This lines up with what we do for regular subtract and it matches up better with X86 assumptions in isel patterns that add with immediate is more canonical than sub with immediate.
Differential Revision: https://reviews.llvm.org/D60020
llvm-svn: 358027
When bitcasting from a source op to a larger bitwidth op, split the demanded bits and OR them on top of one another and demand those merged bits in the SimplifyDemandedBits call on the source op.
llvm-svn: 357992
Simon Pilgrim