Use hexadecimal numbers rather than decimal in various vFile packets
in order to fix compatibility with gdbserver. This also changes the few
custom LLDB packets -- while technically they do not have to be changed,
it is easier to use the same syntax consistently across LLDB.
Differential Revision: https://reviews.llvm.org/D107475
Following tests fail on Arm/AArch64 randomly with timeouts:
TestMultilineNavigation.py
TestBatchMode.py
TestUnicode.py
TestGdbRemote_vContThreads.py
I am marking them as skipped until we find a away make to pass reliably.
The type field is a signed integer.
(https://sourceware.org/gdb/current/onlinedocs/gdb/General-Query-Packets.html)
However it's not packed in the packet in the way
you might think. For example the type -1 should be:
qMemTags:<addr>,<len>:ffffffff
Instead of:
qMemTags:<addr>,<len>:-1
This change makes lldb-server's parsing more strict
and adds more tests to check that we handle negative types
correctly in lldb and lldb-server.
We only support one tag type value at this point,
for AArch64 MTE, which is positive. So this doesn't change
any of those interactions. It just brings us in line with GDB.
Also check that the test target has MTE. Previously
we just checked that we were AArch64 with a toolchain
that supports MTE.
Finally, update the tag type check for QMemTags to use
the same conversion steps that qMemTags now does.
Using static_cast can invoke UB and though we do do a limit
check to avoid this, I think it's clearer with the new method.
Reviewed By: omjavaid
Differential Revision: https://reviews.llvm.org/D104914
This is implemented using the QMemTags packet, as specified
by GDB in:
https://sourceware.org/gdb/current/onlinedocs/gdb/General-Query-Packets.html#General-Query-Packets
(recall that qMemTags was previously added to read tags)
On receipt of a valid packet lldb-server will:
* align the given address and length to granules
(most of the time lldb will have already done this
but the specification doesn't guarantee it)
* Repeat the supplied tags as many times as needed to cover
the range. (if tags > range we just use as many as needed)
* Call ptrace POKEMTETAGS to write the tags.
The ptrace step will loop just like the tag read does,
until all tags are written or we get an error.
Meaning that if ptrace succeeds it could be a partial write.
So we call it again and if we then get an error, return an error to
lldb.
We are not going to attempt to restore tags after a partial
write followed by an error. This matches the behaviour of the
existing memory writes.
The lldb-server tests have been extended to include read and
write in the same test file. With some updated function names
since "qMemTags" vs "QMemTags" isn't very clear when they're
next to each other.
Reviewed By: omjavaid
Differential Revision: https://reviews.llvm.org/D105180
This patch adds a helper function to test target architecture is
AArch64 or not. This also tightens isAArch64* helpers by adding an
extra architecture check.
Reviewed By: DavidSpickett
Differential Revision: https://reviews.llvm.org/D105483
Support using the extended thread-id syntax with Hg packet to select
a subprocess. This makes it possible to start providing support for
running some of the debugger packets against another subprocesses.
Differential Revision: https://reviews.llvm.org/D100261
This adds memory tag reading using the new "qMemTags"
packet and ptrace on AArch64 Linux.
This new packet is following the one used by GDB.
(https://sourceware.org/gdb/current/onlinedocs/gdb/General-Query-Packets.html)
On AArch64 Linux we use ptrace's PEEKMTETAGS to read
tags and we assume that lldb has already checked that the
memory region actually has tagging enabled.
We do not assume that lldb has expanded the requested range
to granules and expand it again to be sure.
(although lldb will be sending aligned ranges because it happens
to need them client side anyway)
Also we don't assume untagged addresses. So for AArch64 we'll
remove the top byte before using them. (the top byte includes
MTE and other non address data)
To do the ptrace read NativeProcessLinux will ask the native
register context for a memory tag manager based on the
type in the packet. This also gives you the ptrace numbers you need.
(it's called a register context but it also has non register data,
so it saves adding another per platform sub class)
The only supported platform for this is AArch64 Linux and the only
supported tag type is MTE allocation tags. Anything else will
error.
Ptrace can return a partial result but for lldb-server we will
be treating that as an error. To succeed we need to get all the tags
we expect.
(Note that the protocol leaves room for logical tags to be
read via qMemTags but this is not going to be implemented for lldb
at this time.)
Reviewed By: omjavaid
Differential Revision: https://reviews.llvm.org/D95601
This feature "memory-tagging+" indicates that lldb-server
supports memory tagging packets. (added in a later patch)
We check HWCAP2_MTE to decide whether to enable this
feature for Linux.
Reviewed By: omjavaid
Differential Revision: https://reviews.llvm.org/D97282
Add a new feature to process save-core on Darwin systems -- for
lldb to create a user process corefile with only the dirty (modified
memory) pages included. All of the binaries that were used in the
corefile are assumed to still exist on the system for the duration
of the use of the corefile. A new --style option to process save-core
is added, so a full corefile can be requested if portability across
systems, or across time, is needed for this corefile.
debugserver can now identify the dirty pages in a memory region
when queried with qMemoryRegionInfo, and the size of vm pages is
given in qHostInfo.
Create a new "all image infos" LC_NOTE for Mach-O which allows us
to describe all of the binaries that were loaded in the process --
load address, UUID, file path, segment load addresses, and optionally
whether code from the binary was executing on any thread. The old
"read dyld_all_image_infos and then the in-memory Mach-O load
commands to get segment load addresses" no longer works when we
only have dirty memory.
rdar://69670807
Differential Revision: https://reviews.llvm.org/D88387
Remove hardcoded platform list for QPassSignals, qXfer:auxv:read
and qXfer:libraries-svr4:read and instead query the process plugin
via the GetSupportedExtensions() API.
Differential Revision: https://reviews.llvm.org/D101241
Update lldb-server to not use fork or vfork on watchOS and tvOS as these
functions are explicitly marked unavailable there.
llvm-project/lldb/test/API/tools/lldb-server/main.cpp:304:11:
error: 'fork' is unavailable: not available on watchOS
if (fork() == 0)
^
WatchSimulator6.2.sdk/usr/include/unistd.h:447:8: note: 'fork' has been
explicitly marked unavailable here
pid_t fork(void) __WATCHOS_PROHIBITED __TVOS_PROHIBITED;
^
llvm-project/lldb/test/API/tools/lldb-server/main.cpp:307:11:
error: 'vfork' is unavailable: not available on watchOS
if (vfork() == 0)
^
WatchSimulator6.2.sdk/usr/include/unistd.h:602:8: note: 'vfork' has been
explicitly marked unavailable here
pid_t vfork(void) __WATCHOS_PROHIBITED __TVOS_PROHIBITED;
^
Add a NativeDelegate API to pass new processes (forks) to LLGS,
and support detaching them via the 'D' packet. A 'D' packet without
a specific PID detaches all processes, otherwise it detaches either
the specified subprocess or the main process, depending on the passed
PID.
Differential Revision: https://reviews.llvm.org/D100191
Introduce a NativeProcessProtocol API for indicating support for
protocol extensions and enabling them. LLGS calls
GetSupportedExtensions() method on the process factory to determine
which extensions are supported by the plugin. If the future is both
supported by the plugin and reported as supported by the client, LLGS
enables it and reports to the client as supported by the server.
The extension is enabled on the process instance by calling
SetEnabledExtensions() method. This is done after qSupported exchange
(if the debugger is attached to any process), as well as after launching
or attaching to a new inferior.
The patch adds 'fork' extension corresponding to 'fork-events+'
qSupported feature and 'vfork' extension for 'vfork-events+'. Both
features rely on 'multiprocess+' being supported as well.
Differential Revision: https://reviews.llvm.org/D100153
This functionality is used exactly once, and it is trivial to implement
it differently (capture into two distinct variables, and compare for
equality afterwards).
These two functions are doing the same thing, only one of them is
sending the packets immediately and the other "queues" them to be sent
later. The first one is better as in case of errors, the backtrace will
point straight to the place that caused them.
Modify the first method to avoid duplication, and ten standardize on it.
The annotation is now (since the introduction of @apple_simulator_test)
redundant, and the test could theoretically run on lldb-server too (if
it supported darwin hosts).
This patch fixes an issue, where if the thread has a signal blocked when
we try to inject it into the process (via vCont), then instead of
executing straight away, the injected signal will trigger another stop
when the thread unblocks the signal.
As (linux) threads start their life with SIGUSR1 (among others)
disabled, and only enable it during initialization, injecting the signal
during this window did not behave as expected. The fix is to change the
test to ensure the signal gets injected with the signal unblocked.
The simplest way to do this was to write a dedicated inferior for this
test. I also created a new header to factor out the function retrieving
the (os-specific) thread id.
Add a minimal support for the multiprocess extension in lldb-server.
The server indicates support for it via qSupported, and accepts
thread-ids containing a PID. However, it still does not support
debugging more than one inferior, so any other PID value results
in an error.
Differential Revision: https://reviews.llvm.org/D98482
The cause is the non-async-signal-safety printf function (et al.). If
the test managed to interrupt the process and inject a signal before the
printf("@started") call returned (but after it has actually written the
output), that string could end up being printed twice (presumably,
because the function did not manage the clear the userspace buffer, and
so the print call in the signal handler would print it once again).
This patch fixes the issue by replacing the printf call in the signal
handler with a sprintf+write combo, which should not suffer from that
problem (though I wouldn't go as far as to call it async signal safe).
The TestGdbRemote_vContThreads.py were introduced to test NetBSD process
plugin's capability of sending per-thread and per-process signals.
However, at some point the tests started failing. From retrospective,
it is possible that they were relying on some bug in the plugin's
original signal handling.
Fix the tests not to expect the process to terminate after receiving
the signals. Instead, scan for output indicating that the signals were
received and match thread IDs in it. Enable 'signal to all threads'
test everywhere as it works fine on Linux. Add a new test for vCont
packet without specific thread IDs. Introduce a helper function
to cover the common part of tests.
While this does not fix all the problems on NetBSD, it enables a subset
of the tests on other systems. I am planning to add more tests
to the group while implementing multiprocess extension for vCont.
Differential Revision: https://reviews.llvm.org/D98749
Skip the AVX-related lldb-server test on non-x86 architectures, as they
do not support AVX. While technically the test worked on Linux because
the AVX check would simply return false, other platforms do not provide
such a straightforward way of checking for AVX (especially remotely),
and the results of such check may need to be interpreted specially
for the platform in question.
Differential Revision: https://reviews.llvm.org/D97450
lldb-server can use a named pipe to communicate the port number it is
listening on. This windows bits of this are already implemented, but we
did not have a test for that, most likely because python does not have
native pipe functionality.
This patch implements the windows bits necessary to test this. I'm using
the ctypes package to call the native APIs directly to avoid a
dependency to non-standard python packages. This introduces some amount
of boilerplate, but our named pipe use case is fairly limited, so we
should not end up needing to wrap large chunks of windows APIs.
Surprisingly to changes to lldb-server were needed to make the test
pass.
Differential Revision: https://reviews.llvm.org/D96260
Although it is located under tools/lldb-server, this test is very
different that other lldb-server tests. The most important distinction
is that it does not test lldb-server directly, but rather interacts with
it through the lldb client. It also tests the relevant client
functionality (the platform connect command, which is even admitted in
the test name). The fact that this test is structured as a lldb-server
test means it cannot access most of the goodies available to the
"normal" lldb tests (the runCmd function, which it reimplements; the
run_break_set_by_symbol utility function; etc.).
This patch makes it a full-fledged lldb this, and rewrites the relevant
bits to make use of the standard features. I also move the test into the
"commands" subtree to better reflect its new status.
I switched the watch simulator test from i386 to using x86_64, but
apparently that's not supported on the bots. Rollback to using i386 and
solve the original issue by passing the target, similar to what I did
in TestSimulatorPlatform.py.
Convert `assertTrue(a == b)` to `assertEqual(a, b)` to produce better failure messages.
These were mostly done via regex search & replace, with some manual fixes.
Differential Revision: https://reviews.llvm.org/D95813
Michał Górny