These tests fail if you build without the x86 llvm backend.
Either because they use an x86 triple or try to backtrace which
requires some x86 knowledge to see all frames.
Reviewed By: labath
Differential Revision: https://reviews.llvm.org/D100194
Local values are constants or addresses that can't be folded into
the instruction that uses them. FastISel materializes these in a
"local value" area that always dominates the current insertion
point, to try to avoid materializing these values more than once
(per block).
https://reviews.llvm.org/D43093 added code to sink these local
value instructions to their first use, which has two beneficial
effects. One, it is likely to avoid some unnecessary spills and
reloads; two, it allows us to attach the debug location of the
user to the local value instruction. The latter effect can
improve the debugging experience for debuggers with a "set next
statement" feature, such as the Visual Studio debugger and PS4
debugger, because instructions to set up constants for a given
statement will be associated with the appropriate source line.
There are also some constants (primarily addresses) that could be
produced by no-op casts or GEP instructions; the main difference
from "local value" instructions is that these are values from
separate IR instructions, and therefore could have multiple users
across multiple basic blocks. D43093 avoided sinking these, even
though they were emitted to the same "local value" area as the
other instructions. The patch comment for D43093 states:
Local values may also be used by no-op casts, which adds the
register to the RegFixups table. Without reversing the RegFixups
map direction, we don't have enough information to sink these
instructions.
This patch undoes most of D43093, and instead flushes the local
value map after(*) every IR instruction, using that instruction's
debug location. This avoids sometimes incorrect locations used
previously, and emits instructions in a more natural order.
In addition, constants materialized due to PHI instructions are
not assigned a debug location immediately; instead, when the
local value map is flushed, if the first local value instruction
has no debug location, it is given the same location as the
first non-local-value-map instruction. This prevents PHIs
from introducing unattributed instructions, which would either
be implicitly attributed to the location for the preceding IR
instruction, or given line 0 if they are at the beginning of
a machine basic block. Neither of those consequences is good
for debugging.
This does mean materialized values are not re-used across IR
instruction boundaries; however, only about 5% of those values
were reused in an experimental self-build of clang.
(*) Actually, just prior to the next instruction. It seems like
it would be cleaner the other way, but I was having trouble
getting that to work.
This reapplies commits cf1c774d and dc35368c, and adds the
modification to PHI handling, which should avoid problems
with debugging under gdb.
Differential Revision: https://reviews.llvm.org/D91734
This reverts commit cf1c774d6a.
This change caused several regressions in the gdb test suite - at least
a sample of which was due to line zero instructions making breakpoints
un-lined. I think they're worth investigating/understanding more (&
possibly addressing) before moving forward with this change.
Revert "[FastISel] NFC: Clean up unnecessary bookkeeping"
This reverts commit 3fd39d3694.
Revert "[FastISel] NFC: Remove obsolete -fast-isel-sink-local-values option"
This reverts commit a474657e30.
Revert "Remove static function unused after cf1c774."
This reverts commit dc35368ccf.
Revert "[lldb] Fix TestThreadStepOut.py after "Flush local value map on every instruction""
This reverts commit 53a14a47ee.
Local values are constants or addresses that can't be folded into
the instruction that uses them. FastISel materializes these in a
"local value" area that always dominates the current insertion
point, to try to avoid materializing these values more than once
(per block).
https://reviews.llvm.org/D43093 added code to sink these local
value instructions to their first use, which has two beneficial
effects. One, it is likely to avoid some unnecessary spills and
reloads; two, it allows us to attach the debug location of the
user to the local value instruction. The latter effect can
improve the debugging experience for debuggers with a "set next
statement" feature, such as the Visual Studio debugger and PS4
debugger, because instructions to set up constants for a given
statement will be associated with the appropriate source line.
There are also some constants (primarily addresses) that could be
produced by no-op casts or GEP instructions; the main difference
from "local value" instructions is that these are values from
separate IR instructions, and therefore could have multiple users
across multiple basic blocks. D43093 avoided sinking these, even
though they were emitted to the same "local value" area as the
other instructions. The patch comment for D43093 states:
Local values may also be used by no-op casts, which adds the
register to the RegFixups table. Without reversing the RegFixups
map direction, we don't have enough information to sink these
instructions.
This patch undoes most of D43093, and instead flushes the local
value map after(*) every IR instruction, using that instruction's
debug location. This avoids sometimes incorrect locations used
previously, and emits instructions in a more natural order.
This does mean materialized values are not re-used across IR
instruction boundaries; however, only about 5% of those values
were reused in an experimental self-build of clang.
(*) Actually, just prior to the next instruction. It seems like
it would be cleaner the other way, but I was having trouble
getting that to work.
Differential Revision: https://reviews.llvm.org/D91734
When loading a PE/COFF target, the associated PDB file often wasn't
found. The executable module contains a path for the associated PDB
file, but people often debug from a different directory than the one
their build system uses. (This is especially common in post-mortem
and cross platform debugging.)
Suppose the COFF executable being debugged is `~/proj/foo.exe`, but
it was built elsewhere and refers to `D:\remote\build\env\foobar.pdb`,
LLDB wouldn't find it.
With this change, if no file exists at the PDB path, LLDB will look
in the executable directory for a PDB file that matches the name of
the one it expected (e.g., `~/proj/foobar.pdb`). If found, the PDB
is subject to the same matching criteria (GUIDs and age) as would
have been used had it been in the original location.
This same-directory-as-the-binary rule is commonly used by debuggers
on Windows.
Differential Review: https://reviews.llvm.org/D84815
These test don't execute the binaries they build, and so they don't need
to build for the host. By hardcoding the target, we don't have do xfail
or skip them for targets which don't have the appropriate support in
clang(-cl).
Following test cases need minor adjustment in order to accomodate xfail
decorator:
lldb/test/Shell/SymbolFile/NativePDB/break-by-line.cpp
lldb/test/Shell/SymbolFile/NativePDB/source-list.cpp
Summary:
Currently when printing data types we include implicit scopes such as inline namespaces or anonymous namespaces.
This leads to command output like this (for `std::set<X>` with X being in an anonymous namespace):
```
(lldb) print my_set
(std::__1::set<(anonymous namespace)::X, std::__1::less<(anonymous namespace)::X>, std::__1::allocator<(anonymous namespace)::X> >) $0 = size=0 {}
```
This patch removes all the implicit scopes when printing type names in TypeSystemClang::GetDisplayTypeName
so that our output now looks like this:
```
(lldb) print my_set
(std::set<X, std::less<X>, std::allocator<X> >) $0 = size=0 {}
```
As previously GetDisplayTypeName and GetTypeName had the same output we actually often used the
two as if they are the same method (they were in fact using the same implementation), so this patch also
fixes the places where we actually want the display type name and not the actual type name.
Note that this doesn't touch the `GetTypeName` class that for example the data formatters use, so this patch
is only changes the way we display types to the user. The full type name can also still be found when passing
'-R' to see the raw output of a variable in case someone is somehow interested in that.
Partly fixes rdar://problem/59292534
Reviewers: shafik, jingham
Reviewed By: shafik
Subscribers: christof, JDevlieghere, lldb-commits
Tags: #lldb
Differential Revision: https://reviews.llvm.org/D74478
This allows explicitly specifying the intended target architecture,
for tests that aren't supposed to be executed, and that don't
require MSVC headers or libraries to be available.
(These tests already implicitly assumed to be built for x86; one
didn't specify anything, assuming x86_64, while the other specified
--arch=32, which only picks the 32 bit variant of the default target
architecture).
Join two comment lines in disassembly.cpp, to keep row numbers
checked in the test unchanged.
This fixes running check-lldb on arm linux.
Previously when this was applied (in 95980409e6), it broke
macos buildbots, as they added "-isysroot <path>" to all %clang*
substitutions, and clang-cl didn't support that.
Reapplying it without further changes to this patch, after D69619
(9c73925226), because now, such extra parameters are added to
%clang_host*, but not to plain %clang_cl.
Differential Revision: https://reviews.llvm.org/D69031
This allows explicitly specifying the intended target architecture,
for tests that aren't supposed to be executed, and that don't
require MSVC headers or libraries to be available.
(These tests already implicitly assumed to be built for x86; one
didn't specify anything, assuming x86_64, while the other specified
--arch=32, which only picks the 32 bit variant of the default target
architecture).
Join two comment lines in disassembly.cpp, to keep row numbers
checked in the test unchanged.
This fixes running check-lldb on arm linux.
Differential Revision: https://reviews.llvm.org/D69031
llvm-svn: 375156
LLDB has three major testing strategies: unit tests, tests that exercise
the SB API though dotest.py and what we currently call lit tests. The
later is rather confusing as we're now using lit as the driver for all
three types of tests. As most of this grew organically, the directory
structure in the LLDB repository doesn't really make this clear.
The 'lit' tests are part of the root and among these tests there's a
Unit and Suite folder for the unit and dotest-tests. This layout makes
it impossible to run just the lit tests.
This patch changes the directory layout to match the 3 testing
strategies, each with their own directory and their own configuration
file. This means there are now 3 directories under lit with 3
corresponding targets:
- API (check-lldb-api): Test exercising the SB API.
- Shell (check-lldb-shell): Test exercising command line utilities.
- Unit (check-lldb-unit): Unit tests.
Finally, there's still the `check-lldb` target that runs all three test
suites.
Finally, this also renames the lit folder to `test` to match the LLVM
repository layout.
Differential revision: https://reviews.llvm.org/D68606
llvm-svn: 374184
Stella Stamenova