This patch makes a number of improvements to the Pipe interface.
1) An interface (PipeBase) is provided which exposes pure virtual
methods for any implementation of Pipe to override. While not
strictly necessary, this helps catch errors where the interfaces
are out of sync.
2) All methods return lldb_private::Error instead of returning bool
or void. This allows richer error information to be propagated
up to LLDB.
3) A new ReadWithTimeout() method is exposed in the base class and
implemented on Windows.
4) Support for both named and anonymous pipes is exposed through the
base interface and implemented on Windows. For creating a new
pipe, both named and anonymous pipes are supported, and for
opening an existing pipe, only named pipes are supported.
New methods described in points #3 and #4 are stubbed out on posix,
but fully implemented on Windows. These should be implemented by
someone on the linux / mac / bsd side.
Reviewed by: Greg Clayton, Oleksiy Vyalov
Differential Revision: http://reviews.llvm.org/D6686
llvm-svn: 224442
Summary:
If a stream contains an empty string, no need to append it to the output
(otherwise we end up with a blank line). Also, no need to print a status
message when the state changes to connected, as this string brings no
information -- "Process 0" does not mean anything to the user, and the
process being connected has no meaning either.
Test Plan:
Connect to a remote linux platform mode daemon with `platform select
remote-linux` followed by `platform connect ...`, create a target and
run it, observe the output. Also, run the full test suite (dosep.py).
Before:
(lldb) [...] connect, etc.
(lldb) r
Process 0 connected
Process 5635 launched: '/Users/sas/Source/test' (x86_64)
Process 5635 stopped
After:
(lldb) [...] connect, etc.
(lldb) r
Process 5635 launched: '/Users/sas/Source/test' (x86_64)
Process 5635 stopped
Reviewers: tfiala, vharron, clayborg
Subscribers: lldb-commits
Differential Revision: http://reviews.llvm.org/D6593
llvm-svn: 224188
The issue with Thumb IT (if/then) instructions is the IT instruction preceeds up to four instructions that are made conditional. If a breakpoint is placed on one of the conditional instructions, the instruction either needs to match the thumb opcode size (2 or 4 bytes) or a BKPT instruction needs to be used as these are always unconditional (even in a IT instruction). If BKPT instructions are used, then we might end up stopping on an instruction that won't get executed. So if we do stop at a BKPT instruction, we need to continue if the condition is not true.
When using the BKPT isntructions are easy in that you don't need to detect the size of the breakpoint that needs to be used when setting a breakpoint even in a thumb IT instruction. The bad part is you will now always stop at the opcode location and let LLDB determine if it should auto-continue. If the BKPT instruction is used, the BKPT that is used for ARM code should be something that also triggers the BKPT instruction in Thumb in case you set a breakpoint in the middle of code and the code is actually Thumb code. A value of 0xE120BE70 will work since the lower 16 bits being 0xBE70 happens to be a Thumb BKPT instruction.
The alternative is to use trap or illegal instructions that the kernel will translate into breakpoint hits. On Mac this was 0xE7FFDEFE for ARM and 0xDEFE for Thumb. The darwin kernel currently doesn't recognize any 32 bit Thumb instruction as a instruction that will get turned into a breakpoint exception (EXC_BREAKPOINT), so we had to use the BKPT instruction on Mac. The linux kernel recognizes a 16 and a 32 bit instruction as valid thumb breakpoint opcodes. The benefit of using 16 or 32 bit instructions is you don't stop on opcodes in a IT block when the condition doesn't match.
To further complicate things, single stepping on ARM is often implemented by modifying the BCR/BVR registers and setting the processor to stop when the PC is not equal to the current value. This means single stepping is another way the ARM target can stop on instructions that won't get executed.
This patch does the following:
1 - Fix the internal debugserver for Apple to use the BKPT instruction for ARM and Thumb
2 - Fix LLDB to catch when we stop in the middle of a Thumb IT instruction and continue if we stop at an instruction that won't execute
3 - Fixes this in a way that will work for any target on any platform as long as it is ARM/Thumb
4 - Adds a patch for ignoring conditions that don't match when in ARM mode (see below)
This patch also provides the code that implements the same thing for ARM instructions, though it is disabled for now. The ARM patch will check the condition of the instruction in ARM mode and continue if the condition isn't true (and therefore the instruction would not be executed). Again, this is not enable, but the code for it has been added.
<rdar://problem/19145455>
llvm-svn: 223851
This is a resubmit of r223548, which was reverted due to breaking
tests on Linux and Mac.
This resubmit fixes the reason for the revert by adding back some
accidentally removed code which appends -c to the command line
when running /bin/sh.
This resubmit also differs from the original patch in that it sets
the architecture on the ProcessLaunchInfo. A follow-up patch will
refactor this to separate the logic for different platforms.
Differential Revision: http://reviews.llvm.org/D6553
Reviewed By: Greg Clayton
llvm-svn: 223695
in the "dummy-target". The dummy target breakpoints prime all future
targets. Breakpoints set before any target is created (e.g. breakpoints
in ~/.lldbinit) automatically get set in the dummy target. You can also
list, add & delete breakpoints from the dummy target using the "-D" flag,
which is supported by most of the breakpoint commands.
This removes a long-standing wart in lldb...
<rdar://problem/10881487>
llvm-svn: 223565
support to LLDB. It includes the following:
- Changed DeclVendor to TypeVendor.
- Made the ObjCLanguageRuntime provide a DeclVendor
rather than a TypeVendor.
- Changed the consumers of TypeVendors to use
DeclVendors instead.
- Provided a few convenience functions on
ClangASTContext to make that easier.
llvm-svn: 223433
(e.g. breakpoints, stop-hooks) before we have any targets - for instance in
your ~/.lldbinit file. These will then get copied over to any new targets
that get created. So far, you can only make stop-hooks.
Breakpoints will have to learn to move themselves from target to target for
us to get them from no-target to new-target.
We should also make a command & SB API way to prime this ur-target.
llvm-svn: 222600
Fixed include:
- Change Platform::ResolveExecutable(...) to take a ModuleSpec instead of a FileSpec + ArchSpec to help resolve executables correctly when we have just a path + UUID (no arch).
- Add the ability to set the listener in SBLaunchInfo and SBAttachInfo in case you don't want to use the debugger as the default listener.
- Modified all places that use the SBLaunchInfo/SBAttachInfo and the internal ProcessLaunchInfo/ProcessAttachInfo to not take a listener as a parameter since it is in the launch/attach info now
- Load a module's sections by default when removing a module from a target. Since we create JIT modules for expressions and helper functions, we could end up with stale data in the section load list if a module was removed from the target as the section load list would still have entries for the unloaded module. Target now has the following functions to help unload all sections a single or multiple modules:
size_t
Target::UnloadModuleSections (const ModuleList &module_list);
size_t
Target::UnloadModuleSections (const lldb::ModuleSP &module_sp);
llvm-svn: 222167
Improvements include:
* Use of libedit's wide character support, which is imperfect but a distinct improvement over ASCII-only
* Fallback for ASCII editing path
* Support for a "faint" prompt clearly distinguished from input
* Breaking lines and insert new lines in the middle of a batch by simply pressing return
* Joining lines with forward and backward character deletion
* Detection of paste to suppress automatic formatting and statement completion tests
* Correctly reformatting when lines grow or shrink to occupy different numbers of rows
* Saving multi-line history, and correctly preserving the "tip" of history during editing
* Displaying visible ^C and ^D indications when interrupting input or sending EOF
* Fledgling VI support for multi-line editing
* General correctness and reliability improvements
llvm-svn: 222163
If a noreturn function was the last function in a section,
we wouldn't correctly back up the saved-pc value into the
correct section leading to us showing the wrong function in
the backtrace.
Also add a backtrace test with an attempt to elicit this
particular layout. It happens to work out with clang -Os
but other compilers may not quite get the same layout I'm
getting at that opt setting. We'll still be exercising the
basic noreturn handling in the unwinder even if we don't get
one function at the very end of a section.
<rdar://problem/16051613>
llvm-svn: 221575
This was done by using regular expressions on any basename we find to ensure it is valid.
This fixed setting breakpoints by name with values like '[J]com.robovm.debug.server.apps.SleepLoop.startingUp()V'. This was previously triggering the C++ method name class to identify the string as C++ with a basename of '[J]com.robovm.debug.server.apps.SleepLoop.startingUp' which was obviously incorrect.
The changes also fixed errors in templated function names like "void foo<int>(...)" where "void foo<int>" was being identified incorrectly as the basename. We also handle more C++ operators correctly now.
llvm-svn: 221416
to indicate that we're doing stuff for the expression
parser.
- When for_expression is true, look through @s and find
the actual class rather than just returning id.
- Rename BuildObjCObjectType to BuildObjCObjectPointerType
since it's actually returning an object *pointer* type.
llvm-svn: 220979
Summary:
Ed Maste found some problems with the commit in D5988. Address most of these.
While here, also add floating point return handling. This doesn't handle
128-bit long double yet. Since I don't have any system that uses it, I don't
currently have plans to implement it.
Reviewers: emaste
Reviewed By: emaste
Subscribers: emaste, lldb-commits
Differential Revision: http://reviews.llvm.org/D6049
llvm-svn: 220963
Summary:
This adds preliminary support for PowerPC/PowerPC64, for FreeBSD. There are
some issues still:
* Breakpoints don't work well on powerpc64.
* Shared libraries don't yet get loaded for a 32-bit process on powerpc64 host.
* Backtraces don't work. This is due to PowerPC ABI using a backchain pointer
in memory, instead of a dedicated frame pointer register for the backchain.
* Breakpoints on functions without debug info may not work correctly for 32-bit
powerpc.
Reviewers: emaste, tfiala, jingham, clayborg
Reviewed By: clayborg
Subscribers: emaste, lldb-commits
Differential Revision: http://reviews.llvm.org/D5988
llvm-svn: 220944
To do this, I fixed the CPPLanguageRuntime::StripNamespacesFromVariableName() function to use a regular expression that correctly determines if the name passed to it is a qualfied C++ name like "a:🅱️:c" or "b::c". The old version of this function was treating '__54-[NSUserScriptTask executeWithInterpreter:arguments::]_block_invoke' as a match with a basename of ']_block_invoke'.
Also fixed a case in the by name lookup of functions where we wouldn't look for the full name if we actually tried to call CPPLanguageRuntime::StripNamespacesFromVariableName() and got an empty basename back.
<rdar://problem/18527866>
llvm-svn: 220432
New functions to give client applications to tools to discover target byte sizes
for addresses prior to ReadMemory. Also added GetPlatform and ReadMemory to the
SBTarget class, since they seemed to be useful utilities to have.
Each new API has had a test case added.
http://reviews.llvm.org/D5867
llvm-svn: 220372
BreakpointLocation::ShouldStop. That worked but wasn't really right,
since there's nothing to guarantee that won't get called more than
once. So this change moves that responsibility to the StopInfoBreakpoint
directly, and then it uses the BreakpointSite to actually do the bumping.
Also fix a test case that was assuming if you had many threads running some
code with a breakpoint in it, the hit count when you stopped would always be
1. Many of the threads could have hit it at the same time...
<rdar://problem/18577603>
llvm-svn: 220358
There were many issues with synchronous mode that we discovered when started to try and add a "batch" mode. There was a race condition where the event handling thread might consume events when in sync mode and other times the Process::WaitForProcessToStop() would consume them. This also led to places where the Process IO handler might or might not get popped when it needed to be.
llvm-svn: 220254
We've already created a FileSpec based on this local and
this code path would never be executed if it is an invalid
FilePath - but the static analyzer doesn't know this and I
want to placate it.
clang static analyzer fixit.
llvm-svn: 219890
an uninitialized value. In reality the code block that
initializes it and the code block that restores it will always
match up - but the analyzer doesn't know that and I want to
quiet it, so...
clang static analyzer fixit.
llvm-svn: 219869
The main issue was if you didn't specify all three (stdin/out/err), you would get file actions added to the launch that would always use the pseudo terminal. This is now fixed.
Also fixed the test suite test that handles IO to test redirecting things individually and all together and in other combinations to make sure we don't regress.
<rdar://problem/18638226>
llvm-svn: 219711
With this change, both local-process llgs and remote-target llgs stdout/stderr
handling from inferior work correctly.
Several log lines have been added around PTY and stdout/stderr redirection
logic on the lldb client side.
Regarding remote llgs execution, see the following:
With these changes, remote llgs with $O now works properly:
$ lldb
(lldb) platform select remote-linux
(lldb) target create ~/some/inferior/exe
(lldb) gdb-remote {some-target}:{port}
(lldb) run
The sequence above will correctly redirect stdout/stderr over gdb-remote $O,
as is needed for remote debugging. That sequence assumes there is a lldb-gdbserver
exe running on the target with {some-host}:{port}.
You can replace the gdb-remote command with a '(lldb) platform connect
connect://{target-ip}:{target-port}'. If you do this and have a
lldb-platform running on the remote end, it will go ahead and launch
llgs for lldb for each target instance that is run/attached.
For local debugging with llgs, the following sequence also works, and
uses local PTYs instead to avoid $O and extra gdb-remote messages:
$ lldb
(lldb) settings set platform.plugin.linux.use-llgs true
(lldb) target create ~/some/inferior/exe
(lldb) run
The above will run the inferior using llgs on the local host, and
will use PTYs rather than $O redirection.
This change also removes the logging that happened after the fork but
before the exec when llgs is launching a new inferior process. Some
aspect of the file handling during that portion of code would not do
the right thing with log handling. We might want to go back later
and have that communicate over a pipe from the child to parent to pass
along any messages that previously were logged in that section of code.
llvm-svn: 219578
Reviewed at http://reviews.llvm.org/D5738
This adds an SB API into SBProcess:
bool SBProcess::IsInstrumentationRuntimePresent(InstrumentationRuntimeType type);
which simply tells whether a particular InstrumentationRuntime (read "ASan") plugin is present and active.
llvm-svn: 219560
do that (RunCommandInterpreter, HandleCommands, HandleCommandsFromFile) to gather
the options into an options class. Also expose that to the SB API's.
Change the way the "-o" options to the lldb driver are processed so:
1) They are run synchronously - didn't really make any sense to run the asynchronously.
2) The stop on error
3) "quit" in one of the -o commands will not quit lldb - not the command interpreter
that was running the -o commands.
I added an entry to the run options to stop-on-crash, but I haven't implemented that yet.
llvm-svn: 219553
Reviewed at http://reviews.llvm.org/D5592
This patch gives LLDB some ability to interact with AddressSanitizer runtime library, on top of what we already have (historical memory stack traces provided by ASan). Namely, that's the ability to stop on an error caught by ASan, and access the report information that are associated with it. The report information is also exposed into SB API.
More precisely this patch...
adds a new plugin type, InstrumentationRuntime, which should serve as a generic superclass for other instrumentation runtime libraries, these plugins get notified when modules are loaded, so they get a chance to "activate" when a specific dynamic library is loaded
an instance of this plugin type, AddressSanitizerRuntime, which activates itself when it sees the ASan dynamic library or founds ASan statically linked in the executable
adds a collection of these plugins into the Process class
AddressSanitizerRuntime sets an internal breakpoint on __asan::AsanDie(), and when this breakpoint gets hit, it retrieves the report information from ASan
this breakpoint is then exposed as a new StopReason, eStopReasonInstrumentation, with a new StopInfo subclass, InstrumentationRuntimeStopInfo
the StopInfo superclass is extended with a m_extended_info field (it's a StructuredData::ObjectSP), that can hold arbitrary JSON-like data, which is the way the new plugin provides the report data
the "thread info" command now accepts a "-s" flag that prints out the JSON data of a stop reason (same way the "-j" flag works now)
SBThread has a new API, GetStopReasonExtendedInfoAsJSON, which dumps the JSON string into a SBStream
adds a test case for all of this
I plan to also get rid of the original ASan plugin (memory history stack traces) and use an instance of AddressSanitizerRuntime for that purpose.
Kuba
llvm-svn: 219546
output style can be customized. Change the built-in default to be
more similar to gdb's disassembly formatting.
The disassembly-format for a gdb-like output is
${addr-file-or-load} <${function.name-without-args}${function.concrete-only-addr-offset-no-padding}>:
The disassembly-format for the lldb style output is
{${function.initial-function}{${module.file.basename}`}{${function.name-without-args}}:\n}{${function.changed}\n{${module.file.basename}`}{${function.name-without-args}}:\n}{${current-pc-arrow} }{${addr-file-or-load}}:
The two backticks in the lldb style formatter triggers the sub-expression evaluation in
CommandInterpreter::PreprocessCommand() so you can't use that one as-is ... changing to
use ' characters instead of ` would work around that.
<rdar://problem/9885398>
llvm-svn: 219544
See http://reviews.llvm.org/D5695 for details.
This change does the following:
Enable lldb-gdbserver (llgs) usage for local-process Linux debugging.
To turn on local llgs debugging support, which is disabled by default, enable this setting:
(lldb) settings set platform.plugin.linux.use-llgs-for-local true
Adds a stream-based Dump() function to FileAction.
Pushes some platform methods that Linux (and FreeBSD) will want to share with MacOSX from PlatformDarwin into PlatformPOSIX.
Reviewed by Greg Clayton.
llvm-svn: 219457
Jim Ingham