argument is non-null, pass it along to PHITranslateSubExpr so that it can
prefer using existing values that dominate the PredBB, instead of just
blindly picking the first equivalent value that it finds on a uselist.
Also when the DominatorTree is specified, have PHITranslateValue filter
out any result that does not dominate the PredBB. This is basically just
refactoring the check that used to be in GetAvailablePHITranslatedSubExpr
and also in GVN.
Despite my initial expectations, this change does not affect the results
of GVN for any testcases that I could find, but it should help compile time.
Before this change, if PHITranslateSubExpr picked a value that does not
dominate, PHITranslateWithInsertion would then insert a new value, which GVN
would later determine to be redundant and would replace. By picking a good
value to begin with, we save GVN the extra work of inserting and then
replacing a new value.
llvm-svn: 97010
induction variable value and a loop-variant value, don't force the
insert position to be at the post-increment position, because it may
not be dominated by the loop-variant value. This fixes a
use-before-def problem noticed on PPC.
llvm-svn: 96774
strides in foreign loops. This helps locate reuse opportunities
with existing induction variables in foreign loops and reduces
the need for inserting new ones. This fixes rdar://7657764.
llvm-svn: 96629
a loop exit value, so that if a loop gets deleted, ScalarEvolution
isn't stick holding on to dangling SCEVAddRecExprs for that loop. This
fixes PR6339.
llvm-svn: 96626
with multiplication by constants distributed through, occasionally
those subexpressions can include both x and -x. For now, if this
condition is discovered within LSR, just prune such cases away,
as they won't be profitable. This fixes a "zero allocated in a
base register" assertion failure.
llvm-svn: 96177
and add a doxygen comment.
Cache the phi entry to avoid doing tons of
PHINode::getBasicBlockIndex calls in the common case.
On my insane testcase from re2c, this speeds up CGP from
617.4s to 7.9s (78x).
llvm-svn: 96083
to a PHI, avoid it in the common case where the BB occurs
in the same index for multiple phis. This speeds up CGP on
an insane testcase from 8.35 to 3.58s.
llvm-svn: 96080
Functions explicitly marked inline will get an inlining threshold slightly
more aggressive than the default for -O3. This means than -O3 builds are
mostly unaffected while -Os builds will be a bit bigger and faster.
The difference depends entirely on how many 'inline's are sprinkled on the
source.
In the CINT2006 suite, only these tests are significantly affected under -Os:
Size Time
471.omnetpp +1.63% -1.85%
473.astar +4.01% -6.02%
483.xalancbmk +4.60% 0.00%
Note that 483.xalancbmk runs too quickly to give useful timing results.
llvm-svn: 96066
2. don't bother trying to merge globals in non-default sections,
doing so is quite dubious at best anyway.
3. fix a bug reported by Arnaud de Grandmaison where we'd try to
merge two globals in different address spaces.
llvm-svn: 95995
bug fixes, and with improved heuristics for analyzing foreign-loop
addrecs.
This change also flattens IVUsers, eliminating the stride-oriented
groupings, which makes it easier to work with.
llvm-svn: 95975
what it does. Enhance it to return false to optimizing vector
sign extensions from vector comparisions, which is the idiom used
to get a splatted vector for a vector comparison.
Doing this breaks vector-casts.ll, add some compensating
transformations to handle the important case they cover without
depending on this canonicalization.
This fixes rdar://7434900 a serious pessimization of vector compares.
llvm-svn: 95855
block. Other blocks may have pointer cycles that will crash
basicaa and other alias analyses. In any case, there is no
point wasting cycles optimizing dead blocks. This fixes
rdar://7635088
llvm-svn: 95852
Initial skeleton and SCEVUnknown lowering implemented,
the rest should come relatively quickly. Move testcase
to new directory.
Move pass to right before SimplifyLibCalls - which is
moved down a bit so we can take advantage of a few opts.
llvm-svn: 95628
This time it's for real! I am going to hook this up in the frontends as well.
The inliner has some experimental heuristics for dealing with the inline hint.
When given a -respect-inlinehint option, functions marked with the inline
keyword are given a threshold just above the default for -O3.
We need some experiments to determine if that is the right thing to do.
llvm-svn: 95466
xform it is checking to actually pass. There is no need to match
m_SelectCst<0, -1> since instcombine canonicalizes that into not(sext).
Add matches for sext(not(x)) in addition to not(sext(x)).
llvm-svn: 95420
short-circuited conditions to AND/OR expressions, and those expressions
are often converted back to a short-circuited form in code gen. The
original source order may have been optimized to take advantage of the
expected values, and if we reassociate them, we change the order and
subvert that optimization. Radar 7497329.
llvm-svn: 95333
This makes the inliner about as agressive as it was before my changes to the
inliner cost calculations. These levels give the same performance and slightly
smaller code than before.
llvm-svn: 95320
Fix bugs where we would compute out of bounds as in bounds, and where
we couldn't know that the linker could override the size of an array.
Add a few new testcases, change existing testcase to use a private
global array instead of extern.
llvm-svn: 95283
The SRThreshold value makes perfect sense for checking if an entire aggregate
should be promoted to a scalar integer, but it is not so good for splitting
an aggregate into its separate elements. A struct may contain a large embedded
array along with some scalar fields that would benefit from being split apart
by SROA. Even if the total aggregate size is large, it may still be good to
perform SROA. Thus, the most important piece of this patch is simply moving
the aggregate size comparison vs. SRThreshold so that it guards only the
aggregate promotion.
We have also been checking the number of elements to decide if an aggregate
should be split up. The limit of "SRThreshold/4" seemed rather arbitrary,
and I don't think it's very useful to derive this limit from SRThreshold
anyway. I've collected some data showing that the current default limit of
32 (since SRThreshold defaults to 128) is a reasonable cutoff for struct
types. One thing suggested by the data is that distinguishing between structs
and arrays might be useful. There are (obviously) a lot more large arrays
than large structs (as measured by the number of elements and not the total
size -- a large array inside a struct still counts as a single element given
the way we do SROA right now). Out of 8377 arrays where we successfully
performed SROA while compiling a large set of benchmarks, only 16 of them had
more than 8 elements. And, for those 16 arrays, it's not at all clear that
SROA was actually beneficial. So, to offset the compile time cost of
investigating more large structs for SROA, the patch lowers the limit on array
elements to 8.
This fixes Apple Radar 7563690.
llvm-svn: 95224
disabled by default. This divides the existing load PRE code into 2 phases:
first it checks that it is safe to move the load to each of the predecessors
where it is unavailable, and then if it is safe, the code is changed to move
the load. Radar 7571861.
llvm-svn: 95007
of objc message send was getting marked arm_apcscc, but the prototype
isn't. This is fine at runtime because objcmsgsend is implemented in
assembly. Only turn a mismatched caller and callee into 'unreachable'
if the callee is a definition.
llvm-svn: 94986
case, instcombine can't zap the invoke for fear of changing the CFG.
However, we have to do something to prevent the next iteration of
instcombine from inserting another store -> undef before the invoke
thereby getting into infinite iteration between dead store elim and
store insertion.
Just zap the callee to null, which will prevent the next iteration
from doing anything.
llvm-svn: 94985
This bug was exposed by my inliner cost changes in r94615, and caused failures
of lencod on most architectures when building with LTO.
This patch fixes lencod and 464.h264ref on x86-64 (and likely others).
llvm-svn: 94858
create a testcase where this matters. The select+load transformation only
occurs when isSafeToLoadUnconditionally is true, and in those situations,
instcombine also changes the underlying objects to be aligned. This seems
like a good idea regardless, and I've verified that it doesn't pessimize
the subsequent realignment.
llvm-svn: 94850
(via APInt &RHSKnownZero = KnownZero, etc) seems dangerous and confusing to me: it
is easy not to notice this, and then wonder why KnownZero/RHSKnownZero changed
underneath you when you modified RHSKnownZero/KnownZero etc. So get rid of this.
No intended functionality change (tested with "make check" + llvm-gcc bootstrap).
llvm-svn: 94802
This was already being done in SSAUpdater::GetValueAtEndOfBlock so I've
just changed SSAUpdater to check for existing PHIs in both places.
llvm-svn: 94690
Modules and ModuleProviders. Because the "ModuleProvider" simply materializes
GlobalValues now, and doesn't provide modules, it's renamed to
"GVMaterializer". Code that used to need a ModuleProvider to materialize
Functions can now materialize the Functions directly. Functions no longer use a
magic linkage to record that they're materializable; they simply ask the
GVMaterializer.
Because the C ABI must never change, we can't remove LLVMModuleProviderRef or
the functions that refer to it. Instead, because Module now exposes the same
functionality ModuleProvider used to, we store a Module* in any
LLVMModuleProviderRef and translate in the wrapper methods. The bindings to
other languages still use the ModuleProvider concept. It would probably be
worth some time to update them to follow the C++ more closely, but I don't
intend to do it.
Fixes http://llvm.org/PR5737 and http://llvm.org/PR5735.
llvm-svn: 94686
parameter with a default value, instead of just hardcoding it in the
implementation. The limit of MaxLookup = 6 was introduced in r69151 to fix
a performance problem with O(n^2) behavior in instcombine, but the scalarrepl
pass is relying on getUnderlyingObject to go all the way back to an AllocaInst.
Making the limit part of the method signature makes it clear that by default
the result is limited and should help avoid similar problems in the future.
This fixes pr6126.
llvm-svn: 94433
"sext cond" instead of a select. This simplifies some instcombine
code, matches the policy for zext (cond ? 1 : 0 -> zext), and allows
us to generate better code for a testcase on ppc.
llvm-svn: 94339
for arbitrary terminators in predecessors, don't assume
it is a conditional or uncond branch. The testcase shows
an example where they can happen with switches.
llvm-svn: 94323
handle the case when we can infer an input to the xor
from all inputs that agree, instead of going into an
infinite loop. Another part of PR6199
llvm-svn: 94321
missing ones are libsupport, libsystem and libvmcore. libvmcore is
currently blocked on bugpoint, which uses EH. Once it stops using
EH, we can switch it off.
This #if 0's out 3 unit tests, because gtest requires RTTI information.
Suggestions welcome on how to fix this.
llvm-svn: 94164
loop-variant components, adds must be inserted after the increment.
Keep track of the increment position for this case, and insert
these adds in the correct location.
llvm-svn: 94110
ValueMapper.cpp ends up calling an out of line
__ZNK4llvm12PATypeHolder3getEv, which is a template and llvm-config
determines arbitrarily to use the one in libipo. This sucks, but
keeping the #include is a reasonable workaround.
llvm-svn: 94103
This new version is much more aggressive about doing "full" reduction in
cases where it reduces register pressure, and also more aggressive about
rewriting induction variables to count down (or up) to zero when doing so
reduces register pressure.
It currently uses fairly simplistic algorithms for finding reuse
opportunities, but it introduces a new framework allows it to combine
multiple strategies at once to form hybrid solutions, instead of doing
all full-reduction or all base+index.
llvm-svn: 94061
than the scaled register. This makes it more likely that subsequent
AddrModeMatcher queries will match the new address the same way as the
old, instead of accidentally matching what had been the base register
as the new scaled register, and then failing to match the scaled register.
This fixes some problems with address-mode sinking multiple muls into a
block, which will be a lot more common with some upcoming
LoopStrengthReduction changes.
llvm-svn: 93935
are the same. I had already fixed a similar problem where the source and
destination were different bitcasts derived from the same alloca, but the
previous fix still did not handle the case where both operands are exactly
the same value. Radar 7552893.
llvm-svn: 93848
aggressive changed the canonical form from sext(trunc(x)) to ashr(lshr(x)),
make sure to transform a couple more things into that canonical form,
and catch a case where we missed turning zext/shl/ashr into a single sext.
llvm-svn: 93787
added to the FSub version. However, the original version of this xform guarded
against doing this for floating point (!Op0->getType()->isFPOrFPVector()).
This is causing LLVM to perform incorrect xforms for code like:
void func(double *rhi, double *rlo, double xh, double xl, double yh, double yl){
double mh, ml;
double c = 134217729.0;
double up, u1, u2, vp, v1, v2;
up = xh*c;
u1 = (xh - up) + up;
u2 = xh - u1;
vp = yh*c;
v1 = (yh - vp) + vp;
v2 = yh - v1;
mh = xh*yh;
ml = (((u1*v1 - mh) + (u1*v2)) + (u2*v1)) + (u2*v2);
ml += xh*yl + xl*yh;
*rhi = mh + ml;
*rlo = (mh - (*rhi)) + ml;
}
The last line was optimized away, but rl is intended to be the difference
between the infinitely precise result of mh + ml and after it has been rounded
to double precision.
llvm-svn: 93369
in JT.
2) When cloning blocks for PHI or xor conditions, use
instsimplify to simplify the code as we go. This allows us to
squish common cases early in JT which opens up opportunities for
subsequent iterations, and allows it to completely simplify the
testcase.
llvm-svn: 93253
condition is a xor with a phi node. This eliminates nonsense
like this from 176.gcc in several places:
LBB166_84:
testl %eax, %eax
- setne %al
- xorb %cl, %al
- notb %al
- testb $1, %al
- je LBB166_85
+ je LBB166_69
+ jmp LBB166_85
This is rdar://7391699
llvm-svn: 93221
trunc has multiple uses. Codegen is not able to coalesce the subreg case
correctly and so this leads to higher register pressure and spilling (see PR5997).
This speeds up 256.bzip2 from 8.60 -> 8.04s on my machine, ~7%.
llvm-svn: 93200
BitsToClear case. This allows it to promote expressions which have an
and/or/xor after the lshr, promoting cases like test2 (from PR4216)
and test3 (random extample extracted from a spec benchmark).
clang now compiles the code in PR4216 into:
_test_bitfield: ## @test_bitfield
movl %edi, %eax
orl $194, %eax
movl $4294902010, %ecx
andq %rax, %rcx
orl $32768, %edi
andq $39936, %rdi
movq %rdi, %rax
orq %rcx, %rax
ret
instead of:
_test_bitfield: ## @test_bitfield
movl %edi, %eax
orl $194, %eax
movl $4294902010, %ecx
andq %rax, %rcx
shrl $8, %edi
orl $128, %edi
shlq $8, %rdi
andq $39936, %rdi
movq %rdi, %rax
orq %rcx, %rax
ret
which is still not great, but is progress.
llvm-svn: 93145
new BitsToClear result which allows us to start promoting
expressions that end with a lshr-by-constant. This is
conservatively correct and better than what we had before
(see testcases) but still needs to be extended further.
llvm-svn: 93144
the zext dest type. This allows us to handle test52/53 in cast.ll,
and allows llvm-gcc to generate much better code for PR4216 in -m64
mode:
_test_bitfield: ## @test_bitfield
orl $32962, %edi
movl %edi, %eax
andl $-25350, %eax
ret
This also fixes a bug handling vector extends, ensuring that the
mask produced is a vector constant, not an integer constant.
llvm-svn: 93127
elimination of a sign extend to be a win, which simplifies
the client of CanEvaluateSExtd, and allows us to eliminate
more casts (examples taken from real code).
llvm-svn: 93109
lshr+ashr instead of trunc+sext. We want to avoid type
conversions whenever possible, it is easier to codegen expressions
without truncates and extensions.
llvm-svn: 93107
1) don't try to optimize a sext or zext that is only used by a trunc, let
the trunc get optimized first. This avoids some pointless effort in
some common cases since instcombine scans down a block in the first pass.
2) Change the cost model for zext elimination to consider an 'and' cheaper
than a zext. This allows us to do it more aggressively, and for the next
patch to simplify the code quite a bit.
llvm-svn: 93097
commonIntCastTransforms into the callers, eliminating a switch,
and allowing the static predicate methods to be moved down to
live next to the corresponding function. No functionality
change.
llvm-svn: 93089
to an element of a vector in a static ctor) which occurs with an
unrelated patch I'm testing. Annoyingly, EvaluateStoreInto basically
does exactly the same stuff as InsertElement constant folding, but it
now handles vectors, and you can't insertelement into a vector. It
would be 'really nice' if GEP into a vector were not legal.
llvm-svn: 92889
phi nodes when deciding which pointers point to local memory.
I actually checked long ago how useful this is, and it isn't
very: it hardly ever fires in the testsuite, but since Chris
wants it here it is!
llvm-svn: 92836
memcpy, memset and other intrinsics that only access their arguments
to be readnone if the intrinsic's arguments all point to local memory.
This improves the testcase in the README to readonly, but it could in
theory be made readnone, however this would involve more sophisticated
analysis that looks through the memcpy.
llvm-svn: 92829
Previously, instcombine would only promote an expression tree to
the larger type if doing so eliminated two casts. This is because
a need to manually do the sign extend after the promoted expression
tree with two shifts. Now, we keep track of whether the result of
the computation is going to be properly sign extended already. If
so, we can unconditionally promote the expression, which allows us
to zap more sext's.
This implements rdar://6598839 (aka gcc pr38751)
llvm-svn: 92815
Eliminate the 'AddMaskingAnd' transformation, it is redundant with this
more general code right below it:
// A+B --> A|B iff A and B have no bits set in common.
llvm-svn: 92693
that got instantiated. There is no reason for instcombine
to try this hard for simple associative optimizations. Next
up, eliminate the template completely.
llvm-svn: 92692
when doing this transform if the GEP is not inbounds. No testcase because
it is very difficult to trigger this: instcombine already canonicalizes
GEP indices to pointer size, so it relies specific permutations of the
instcombine worklist.
Thanks to Duncan for pointing this possible problem out.
llvm-svn: 92495
on the example in PR4216. This doesn't trigger in the testsuite,
so I'd really appreciate someone scrutinizing the logic for
correctness.
llvm-svn: 92458
when a consequtive sequence of elements all satisfies the
predicate. Like the double compare case, this generates better
code than the magic constant case and generalizes to more than
32/64 element array lookups.
Here are some examples where it triggers. From 403.gcc, most
accesses to the rtx_class array are handled, e.g.:
@rtx_class = constant [153 x i8] c"xxxxxmmmmmmmmxxxxxxxxxxxxmxxxxxxiiixxxxxxxxxxxxxxxxxxxooxooooooxxoooooox3x2c21c2222ccc122222ccccaaaaaa<<<<<<<<<<<<<<<<<<111111111111bbooxxxxxxxxxxcc2211x", align 32 ; <[153 x i8]*> [#uses=547]
%142 = icmp eq i8 %141, 105
@rtx_class = constant [153 x i8] c"xxxxxmmmmmmmmxxxxxxxxxxxxmxxxxxxiiixxxxxxxxxxxxxxxxxxxooxooooooxxoooooox3x2c21c2222ccc122222ccccaaaaaa<<<<<<<<<<<<<<<<<<111111111111bbooxxxxxxxxxxcc2211x", align 32 ; <[153 x i8]*> [#uses=543]
%165 = icmp eq i8 %164, 60
Also, most of the 59-element arrays (mode_class/rid_to_yy, etc)
optimized before are actually range compares. This lets 32-bit
machines optimize them.
400.perlbmk has stuff like this:
400.perlbmk: PL_regkind, even for 32-bit:
@PL_regkind = constant [62 x i8] c"\00\00\02\02\02\06\06\06\06\09\09\0B\0B\0D\0E\0E\0E\11\12\12\14\14\16\16\18\18\1A\1A\1C\1C\1E\1F !!!$$&'((((,-.///88886789:;8$", align 32 ; <[62 x i8]*> [#uses=4]
%811 = icmp ne i8 %810, 33
@PL_utf8skip = constant [256 x i8] c"\01\01\01\01\01\01\01\01\01\01\01\01\01\01\01\01\01\01\01\01\01\01\01\01\01\01\01\01\01\01\01\01\01\01\01\01\01\01\01\01\01\01\01\01\01\01\01\01\01\01\01\01\01\01\01\01\01\01\01\01\01\01\01\01\01\01\01\01\01\01\01\01\01\01\01\01\01\01\01\01\01\01\01\01\01\01\01\01\01\01\01\01\01\01\01\01\01\01\01\01\01\01\01\01\01\01\01\01\01\01\01\01\01\01\01\01\01\01\01\01\01\01\01\01\01\01\01\01\01\01\01\01\01\01\01\01\01\01\01\01\01\01\01\01\01\01\01\01\01\01\01\01\01\01\01\01\01\01\01\01\01\01\01\01\01\01\01\01\01\01\01\01\01\01\01\01\01\01\01\01\01\01\01\01\01\01\01\01\01\01\01\01\02\02\02\02\02\02\02\02\02\02\02\02\02\02\02\02\02\02\02\02\02\02\02\02\02\02\02\02\02\02\02\02\03\03\03\03\03\03\03\03\03\03\03\03\03\03\03\03\04\04\04\04\04\04\04\04\05\05\05\05\06\06\07\0D", align 32 ; <[256 x i8]*> [#uses=94]
%12 = icmp ult i8 %10, 2
etc.
llvm-svn: 92426
two elements match or don't match with two comparisons. For
example, the testcase compiles into:
define i1 @test5(i32 %X) {
%1 = icmp eq i32 %X, 2 ; <i1> [#uses=1]
%2 = icmp eq i32 %X, 7 ; <i1> [#uses=1]
%R = or i1 %1, %2 ; <i1> [#uses=1]
ret i1 %R
}
This generalizes the previous xforms when the array is larger than
64 elements (and this case matches) and generates better code for
cases where it overlaps with the magic bitshift case.
This generalizes more cases than you might expect. For example,
400.perlbmk has:
@PL_utf8skip = constant [256 x i8] c"\01\01\01\...
%15 = icmp ult i8 %7, 7
403.gcc has:
@rid_to_yy = internal constant [114 x i16] [i16 259, i16 260, ...
%18 = icmp eq i16 %16, 295
and xalancbmk has a bunch of examples, such as
_ZN11xercesc_2_5L15gCombiningCharsE and _ZN11xercesc_2_5L10gBaseCharsE.
llvm-svn: 92417
arrays with variable indices into a comparison of the index
with a constant. The most common occurrence of this that
I see by far is stuff like:
if ("foobar"[i] == '\0') ...
which we compile into: if (i == 6), saving a load and
materialization of the global address. This also exposes
loop trip count information to later passes in many cases.
This triggers hundreds of times in xalancbmk, which is where I first
noticed it, but it also triggers in many other apps. Here are a few
interesting ones from various apps:
@must_be_connected_without = internal constant [8 x i8*] [i8* getelementptr inbounds ([3 x i8]* @.str64320, i64 0, i64 0), i8* getelementptr inbounds ([3 x i8]* @.str27283, i64 0, i64 0), i8* getelementptr inbounds ([4 x i8]* @.str71327, i64 0, i64 0), i8* getelementptr inbounds ([4 x i8]* @.str72328, i64 0, i64 0), i8* getelementptr inbounds ([3 x i8]* @.str18274, i64 0, i64 0), i8* getelementptr inbounds ([6 x i8]* @.str11267, i64 0, i64 0), i8* getelementptr inbounds ([3 x i8]* @.str32288, i64 0, i64 0), i8* null], align 32 ; <[8 x i8*]*> [#uses=2]
%scevgep.i = getelementptr [8 x i8*]* @must_be_connected_without, i64 0, i64 %indvar.i ; <i8**> [#uses=1]
%17 = load ...
%18 = icmp eq i8* %17, null ; <i1> [#uses=1]
-> icmp eq i64 %indvar.i, 7
@yytable1095 = internal constant [84 x i8] c"\12\01(\05\06\07\08\09\0A\0B\0C\0D\0E1\0F\10\11266\1D: \10\11,-,0\03'\10\11B6\04\17&\18\1945\05\06\07\08\09\0A\0B\0C\0D\0E\1E\0F\10\11*\1A\1B\1C$3+>#%;<IJ=ADFEGH9KL\00\00\00C", align 32 ; <[84 x i8]*> [#uses=2]
%57 = getelementptr inbounds [84 x i8]* @yytable1095, i64 0, i64 %56 ; <i8*> [#uses=1]
%mode.0.in = getelementptr inbounds [9 x i32]* @mb_mode_table, i64 0, i64 %.pn ; <i32*> [#uses=1]
load ...
%64 = icmp eq i8 %58, 4 ; <i1> [#uses=1]
-> icmp eq i64 %.pn, 35 ; <i1> [#uses=0]
@gsm_DLB = internal constant [4 x i16] [i16 6554, i16 16384, i16 26214, i16 32767]
%scevgep.i = getelementptr [4 x i16]* @gsm_DLB, i64 0, i64 %indvar.i ; <i16*> [#uses=1]
%425 = load %scevgep.i
%426 = icmp eq i16 %425, -32768 ; <i1> [#uses=0]
-> false
llvm-svn: 92411
pointer to int casts that confuse later optimizations. See PR3351
for details.
This improves but doesn't complete fix 483.xalancbmk because llvm-gcc
does this xform in GCC's "fold" routine as well. Clang++ will do
better I guess.
llvm-svn: 92408
positive and negative forms of constants together. This
allows us to compile:
int foo(int x, int y) {
return (x-y) + (x-y) + (x-y);
}
into:
_foo: ## @foo
subl %esi, %edi
leal (%rdi,%rdi,2), %eax
ret
instead of (where the 3 and -3 were not factored):
_foo:
imull $-3, 8(%esp), %ecx
imull $3, 4(%esp), %eax
addl %ecx, %eax
ret
this started out as:
movl 12(%ebp), %ecx
imull $3, 8(%ebp), %eax
subl %ecx, %eax
subl %ecx, %eax
subl %ecx, %eax
ret
This comes from PR5359.
llvm-svn: 92381
getMDKindID/getMDKindNames methods to LLVMContext (and add
convenience methods to Module), eliminating MetadataContext.
Move the state that it maintains out to LLVMContext.
llvm-svn: 92259
I asked Devang to do back on Sep 27. Instead of going through the
MetadataContext class with methods like getMD() and getMDs(), just
ask the instruction directly for its metadata with getMetadata()
and getAllMetadata().
This includes a variety of other fixes and improvements: previously
all Value*'s were bloated because the HasMetadata bit was thrown into
value, adding a 9th bit to a byte. Now this is properly sunk down to
the Instruction class (the only place where it makes sense) and it
will be folded away somewhere soon.
This also fixes some confusion in getMDs and its clients about
whether the returned list is indexed by the MDID or densely packed.
This is now returned sorted and densely packed and the comments make
this clear.
This introduces a number of fixme's which I'll follow up on.
llvm-svn: 92235
non-templated IRBuilderBase class. Move that large CreateGlobalString
out of line, eliminating the need to #include GlobalVariable.h in IRBuilder.h
llvm-svn: 92227
SDISel. This optimization was causing simplifylibcalls to
introduce type-unsafe nastiness. This is the first step, I'll be
expanding the memcmp optimizations shortly, covering things that
we really really wouldn't want simplifylibcalls to do.
llvm-svn: 92098
load is needed when we have a small store into a large alloca (at which
point we get a load/insert/store sequence), but when you do a full-sized
store, this load ends up being dead.
This dead load is bad in really large nasty testcases where the load ends
up causing mem2reg to insert large chains of dependent phi nodes which only
ADCE can delete. Instead of doing this, just don't insert the dead load.
This fixes rdar://6864035
llvm-svn: 91917
missing check that an array reference doesn't go past the end of the array,
and remove some redundant checks for in-bound array and vector references
that are no longer needed.
llvm-svn: 91897
by merging all returns in a function into a single one, but simplifycfg
currently likes to duplicate the return (an unfortunate choice!)
llvm-svn: 91890
instead of stored. This reduces memdep memory usage, and also eliminates a bunch of
weakvh's. This speeds up gvn on gcc.c-torture/20001226-1.c from 23.9s to 8.45s (2.8x)
on a different machine than earlier.
llvm-svn: 91885
load to avoid even messing around with SSAUpdate at all. In this case (which
is very common, we can just use the input value directly).
This speeds up GVN time on gcc.c-torture/20001226-1.c from 36.4s to 16.3s,
which still isn't great, but substantially better and this is a simple speedup
that applies to lots of different cases.
llvm-svn: 91851
two-element arrays. After restructuring the SROA code, it was not safe to
do this without adding more checking. It is not clear that this special-case
has really been useful, and removing this simplifies the code quite a bit.
llvm-svn: 91828
'GetValueInMiddleOfBlock' case, instead of inserting
duplicates.
A similar fix is almost certainly needed by the machine-level
SSAUpdate implementation.
llvm-svn: 91820
implement some optimizations for MIN(MIN()) and MAX(MAX()) and
MIN(MAX()) etc. This substantially improves the code in PR5822 but
doesn't kick in much elsewhere. 2 max's were optimized in
pairlocalalign and one in smg2000.
llvm-svn: 91814
Use the presence of NSW/NUW to fold "icmp (x+cst), x" to a constant in
cases where it would otherwise be undefined behavior.
Surprisingly (to me at least), this triggers hundreds of the times in
a few benchmarks: lencode, ldecode, and 466.h264ref seem to *really*
like this.
llvm-svn: 91812
where instcombine would have to split a critical edge due to a
phi node of an invoke. Since instcombine can't change the CFG,
it has to bail out from doing the transformation.
llvm-svn: 91763
* change FindElementAndOffset to return a uint64_t instead of unsigned, and
to identify the type to be used for that result in a GEP instruction.
* move "isa<ConstantInt>" to be first in conditional.
* replace some dyn_casts with casts.
* add a comment about handling mem intrinsics.
llvm-svn: 91762
contains another loop, or an instruction. The loop form is
substantially more efficient on large loops than the typical
code it replaces.
llvm-svn: 91654
of 91296 that caused trouble -- the Processed list needs to be
preserved for the livetime of the pass, as AddUsersIfInteresting
is called from other passes.
llvm-svn: 91641
problem", this broke llvm-gcc bootstrap for release builds on
x86_64-apple-darwin10.
This reverts commit db22309800b224a9f5f51baf76071d7a93ce59c9.
llvm-svn: 91534
found last time. Instead of trying to modify the IR while iterating over it,
I've change it to keep a list of WeakVH references to dead instructions, and
then delete those instructions later. I also added some special case code to
detect and handle the situation when both operands of a memcpy intrinsic are
referencing the same alloca.
llvm-svn: 91459
isPodLike type trait. This is a generally useful type trait for
more than just DenseMap, and we really care about whether something
acts like a pod, not whether it really is a pod.
llvm-svn: 91421
While scanning through the uses of an alloca, keep track of the current offset
relative to the start of the alloca, and check memory references to see if
the offset & size correspond to a component within the alloca. This has the
nice benefit of unifying much of the code from isSafeUseOfAllocation,
isSafeElementUse, and isSafeUseOfBitCastedAllocation. The code to rewrite
the uses of a promoted alloca, after it is determined to be safe, is
reorganized in the same way.
Also, when rewriting GEP instructions, mark them as "in-bounds" since all the
indices are known to be safe.
llvm-svn: 91184
value size. This only manifested when memdep inprecisely returns clobber,
which is do to a caching issue in the PR5744 testcase. We can 'efficiently
emulate' this by using '-no-aa'
llvm-svn: 91004
phi translation of complex expressions like &A[i+1]. This has the
following benefits:
1. The phi translation logic is all contained in its own class with
a strong interface and verification that it is self consistent.
2. The logic is more correct than before. Previously, if intermediate
expressions got PHI translated, we'd miss the update and scan for
the wrong pointers in predecessor blocks. @phi_trans2 is a testcase
for this.
3. We have a lot less code in memdep.
We can handle phi translation across blocks of things like @phi_trans3,
which is pretty insane :).
This patch should fix the miscompiles of 255.vortex, and I tested it
with a bootstrap of llvm-gcc, llvm-test and dejagnu of course.
llvm-svn: 90926
handle cases like this:
void test(int N, double* G) {
long j;
for (j = 1; j < N - 1; j++)
G[j+1] = G[j] + G[j+1];
}
where G[1] isn't live into the loop.
llvm-svn: 90041
array indexes. The "complex" case of SRoA still handles them, and correctly.
This fixes a weirdness where we'd correctly avoid transforming A[0][42] if
the 42 was too large, but we'd only do it if it was one gep, not two separate
ones.
llvm-svn: 90007
generates store to undef and some generates store to null as the idiom
for undefined behavior. Since simplifycfg zaps both, don't remove the
undefined behavior in instcombine.
llvm-svn: 89971
ConstantExpr, not just the top-level operator. This allows it to
fold many more constants.
Also, make GlobalOpt call ConstantFoldConstantExpression on
GlobalVariable initializers.
llvm-svn: 89659
it may be used in contexts where preheader insertion may have failed due
to an indirectbr.
Make LoopSimplify's LoopSimplify::SeparateNestedLoop properly fail in
the case that it would require splitting an indirectbr edge.
These fix PR5502.
llvm-svn: 89484
tests/Transforms/InstCombine/shufflemask-undef.ll. If
anyone cares, the use of 2*e here (and the equivalent
all over the place in instcombine) seems wrong, though
harmless: it should really be twice the length of the
input vector. I think shufflevector used to require
that the mask have the same length as the input, but I
don't think that's true any more. I don't care enough
about vectors to do anything about this...
llvm-svn: 89456
if it is not ultimately captured. Teach BasicAliasAnalysis that a
local object address which does not escape and is never stored does
not alias with a value resulting from a load.
llvm-svn: 89398
they are lowered to instruction sequences more complex than a simple
load, such that CodeGen cannot rematerialize them, a reload from a
spill slot is likely to be cheaper than the complex sequence.
llvm-svn: 89374
running IPSCCP early, and we run functionattrs interlaced with the inliner,
we often (particularly for small or noop functions) completely propagate
all of the information about a call to its call site in IPSSCP (making a call
dead) and functionattrs is smart enough to realize that the function is
readonly (because it is interlaced with inliner).
To improve compile time and make the inliner threshold more accurate, realize
that we don't have to inline dead readonly function calls. Instead, just
delete the call. This happens all the time for C++ codes, here are some
counters from opt/llvm-ld counting the number of times calls were deleted vs
inlined on various apps:
Tramp3d opt:
5033 inline - Number of call sites deleted, not inlined
24596 inline - Number of functions inlined
llvm-ld:
667 inline - Number of functions deleted because all callers found
699 inline - Number of functions inlined
483.xalancbmk opt:
8096 inline - Number of call sites deleted, not inlined
62528 inline - Number of functions inlined
llvm-ld:
217 inline - Number of allocas merged together
2158 inline - Number of functions inlined
471.omnetpp:
331 inline - Number of call sites deleted, not inlined
8981 inline - Number of functions inlined
llvm-ld:
171 inline - Number of functions deleted because all callers found
629 inline - Number of functions inlined
Deleting a call is much faster than inlining it, and is insensitive to the
size of the callee. :)
llvm-svn: 86975
cannot be folded into target cmp instruction.
- Avoid a phase ordering issue where early cmp optimization would prevent the
later count-to-zero optimization.
- Add missing checks which could cause LSR to reuse stride that does not have
users.
- Fix a bug in count-to-zero optimization code which failed to find the pre-inc
iv's phi node.
- Remove, tighten, loosen some incorrect checks disable valid transformations.
- Quite a bit of code clean up.
llvm-svn: 86969
making the new LVI stuff smart enough to subsume some special
cases in the old code. Disable them when LVI is around, the
testcase still passes.
llvm-svn: 86951
llvm.invariant.start to be used without necessarily being paired with a call
to llvm.invariant.end. If you run the entire optimization pipeline then such
calls are in fact deleted (adce does it), but that's actually a good thing since
we probably do want them to be zapped late in the game. There should really be
an integration test that checks that the llvm.invariant.start call lasts long
enough that all passes that do interesting things with it get to do their stuff
before it is deleted. But since no passes do anything interesting with it yet
this will have to wait for later.
llvm-svn: 86840
start using them in a trivial way when -enable-jump-threading-lvi
is passed. enable-jump-threading-lvi will be my playground for
awhile.
llvm-svn: 86789
debug intrinsics, and an unconditional branch when possible. This
reuses the TryToSimplifyUncondBranchFromEmptyBlock function split
out of simplifycfg.
llvm-svn: 86722
just one level deep. On the testcase we go from getting this:
F1: ; preds = %T2
%F = and i1 true, %cond ; <i1> [#uses=1]
br i1 %F, label %X, label %Y
to a fully threaded:
F1: ; preds = %T2
br label %Y
This changes gets us to the point where we're forming (too many) switch
instructions on doug's strswitch testcase.
llvm-svn: 86646
except that the result may not be a constant. Switch jump threading to
use it so that it gets things like (X & 0) -> 0, which occur when phi preds
are deleted and the remaining phi pred was a zero.
llvm-svn: 86637
This patch forbids implicit conversion of DenseMap::const_iterator to
DenseMap::iterator which was possible because DenseMapIterator inherited
(publicly) from DenseMapConstIterator. Conversion the other way around is now
allowed as one may expect.
The template DenseMapConstIterator is removed and the template parameter
IsConst which specifies whether the iterator is constant is added to
DenseMapIterator.
Actually IsConst parameter is not necessary since the constness can be
determined from KeyT but this is not relevant to the fix and can be addressed
later.
Patch by Victor Zverovich!
llvm-svn: 86636
the loop. This is needed because with indirectbr it may not be possible
for LoopSimplify to guarantee that all loop exit predecessors are
inside the loop. This fixes PR5437.
LCCSA no longer actually requires LoopSimplify form, but for now it
must still have the dependency because the PassManager doesn't know
how to schedule LoopSimplify otherwise.
llvm-svn: 86569
here:
1) We need to avoid processing sigma nodes as phi nodes for constraint generation.
2) We need to generate constraints for comparisons against constants properly.
This includes our first working ABCD test!
llvm-svn: 86498
graphs being produced. The cause was that we were incorrectly marking sigma instructions as
processed after handling the sigma-specific constraints for them, potentially neglecting to
process them as normal instructions as well.
Unfortunately, the testcase that inspired this still doesn't work because of a bug in the solver,
which is next on the list to debug.
llvm-svn: 86486
when both the source and dest are illegal types, since it would cause
the phi to grow (for example, we shouldn't transform test14b's phi to
a phi on i320). This fixes an infinite loop on i686 bootstrap with
phi slicing turned on, so turn it back on.
llvm-svn: 86483
not turn a PHI in a legal type into a PHI of an illegal type, and
add a new optimization that breaks up insane integer PHI nodes into
small pieces (PR3451).
llvm-svn: 86443
(eliminating some extends) if the new type of the
computation is legal or if both the source and dest
are illegal. This prevents instcombine from changing big
chains of computation into i64 on 32-bit targets for
example.
llvm-svn: 86398
Here is the original commit message:
This commit updates malloc optimizations to operate on malloc calls that have constant int size arguments.
Update CreateMalloc so that its callers specify the size to allocate:
MallocInst-autoupgrade users use non-TargetData-computed allocation sizes.
Optimization uses use TargetData to compute the allocation size.
Now that malloc calls can have constant sizes, update isArrayMallocHelper() to use TargetData to determine the size of the malloced type and the size of malloced arrays.
Extend getMallocType() to support malloc calls that have non-bitcast uses.
Update OptimizeGlobalAddressOfMalloc() to optimize malloc calls that have non-bitcast uses. The bitcast use of a malloc call has to be treated specially here because the uses of the bitcast need to be replaced and the bitcast needs to be erased (just like the malloc call) for OptimizeGlobalAddressOfMalloc() to work correctly.
Update PerformHeapAllocSRoA() to optimize malloc calls that have non-bitcast uses. The bitcast use of the malloc is not handled specially here because ReplaceUsesOfMallocWithGlobal replaces through the bitcast use.
Update OptimizeOnceStoredGlobal() to not care about the malloc calls' bitcast use.
Update all globalopt malloc tests to not rely on autoupgraded-MallocInsts, but instead use explicit malloc calls with correct allocation sizes.
llvm-svn: 86311
predicates. This allows us to jump thread things like:
_ZN12StringSwitchI5ColorE4CaseILj7EEERS1_RAT__KcRKS0_.exit119:
%tmp1.i24166 = phi i8 [ 1, %bb5.i117 ], [ %tmp1.i24165, %_Z....exit ], [ %tmp1.i24165, %bb4.i114 ]
%toBoolnot.i87 = icmp eq i8 %tmp1.i24166, 0 ; <i1> [#uses=1]
%tmp4.i90 = icmp eq i32 %tmp2.i, 6 ; <i1> [#uses=1]
%or.cond173 = and i1 %toBoolnot.i87, %tmp4.i90 ; <i1> [#uses=1]
br i1 %or.cond173, label %bb4.i96, label %_ZN12...
Where it is "obvious" that when coming from %bb5.i117 that the 'and' is always
false. This triggers a surprisingly high number of times in the testsuite,
and gets us closer to generating good code for doug's strswitch testcase.
This also make a bunch of other code in jump threading redundant, I'll rip
out in the next patch. This survived an enable-checking llvm-gcc bootstrap.
llvm-svn: 86264
unsplittable critical edges, which means the introduction of
loops which cannot be transformed to LoopSimplify form. Fix
LoopSimplify to avoid transforming such loops into invalid
code.
llvm-svn: 86176
makes several optimization passes abort in cases where they're currently
silently miscompiling code.
Remove the indirectbr assertion from SplitEdge. Indirectbr is only
a problem for critical edges, and SplitEdge defers to SplitCriticalEdge
to handle those, and SplitCriticalEdge has its own assertion for
indirectbr.
llvm-svn: 86147
MallocInst-autoupgrade users use non-TargetData-computed allocation sizes.
Optimization uses use TargetData to compute the allocation size.
Now that malloc calls can have constant sizes, update isArrayMallocHelper() to use TargetData to determine the size of the malloced type and the size of malloced arrays.
Extend getMallocType() to support malloc calls that have non-bitcast uses.
Update OptimizeGlobalAddressOfMalloc() to optimize malloc calls that have non-bitcast uses. The bitcast use of a malloc call has to be treated specially here because the uses of the bitcast need to be replaced and the bitcast needs to be erased (just like the malloc call) for OptimizeGlobalAddressOfMalloc() to work correctly.
Update PerformHeapAllocSRoA() to optimize malloc calls that have non-bitcast uses. The bitcast use of the malloc is not handled specially here because ReplaceUsesOfMallocWithGlobal replaces through the bitcast use.
Update OptimizeOnceStoredGlobal() to not care about the malloc calls' bitcast use.
Update all globalopt malloc tests to not rely on autoupgraded-MallocInsts, but instead use explicit malloc calls with correct allocation sizes.
llvm-svn: 86077
to EmitGEPOffset.
Implement some new transforms for optimizing
subtracts of two pointer to ints into the same vector. This happens
for C++ iterator idioms for example, stringmap takes a const char*
that points to the start and end of a string. Once inlined, we want
the pointer difference to turn back into a length.
This is rdar://7362831.
llvm-svn: 86021
functions that don't have local linkage. Basically, we need to be more
careful about propagating argument information to functions whose results
we aren't tracking. This fixes a miscompilation of
LLVMCConfigurationEmitter.cpp when built with an llvm-gcc that has ipsccp
enabled.
llvm-svn: 85923
function to calls of that function, regardless of whether it has local
linkage or has its address taken. Not escaping should only affect
whether we make an aggressive assumption about the arguments to a
function, not whether we can track the result of it.
llvm-svn: 85795
a DenseMap. Doing this required being aware of subtle iterator
invalidation issues, but it provides a big speedup. In a
release-asserts build, this sped up optimizing 403.gcc from
1.34s -> 0.79s (IPSCCP) and 1.11s -> 0.44s (SCCP).
This commit also conflates in a bunch of general cleanups, sorry.
llvm-svn: 85788
phis, it didn't preserve the alignment of the load. This is a missed
optimization of the alignment is high and a miscompilation when the
alignment is low.
llvm-svn: 85736
when BB2 has its address taken. Since it ends up doing BB2->rauw(BB1),
this can cause the address of the entry block to be taken. Since it is
generally undesirable to nuke blocks whose address is taken, even when
we can, just unconditionally stop this xform.
llvm-svn: 85708
MergeBlockIntoPredecessor. This makes SimplifyCFG slightly more aggressive,
and makes it unnecessary for LoopUnroll to have its own copy of this code.
llvm-svn: 85667
PHI operands by the predecessor order, sort them by the order used by the
first PHI in the block. This is still suffucient to expose duplicates.
llvm-svn: 85634
ArraySize * ElementSize
ElementSize * ArraySize
ArraySize << log2(ElementSize)
ElementSize << log2(ArraySize)
Refactor isArrayMallocHelper and delete isSafeToGetMallocArraySize, so that there is only 1 copy of the malloc array determining logic.
Update users of getMallocArraySize() to not bother calling isArrayMalloc() as well.
llvm-svn: 85421
Checks on Demand algorithm which looks at arbitrary branches instead of loop
iterations. This is GSoC work by Andre Tavares with only editorial changes
applied!
llvm-svn: 85382
In the new world order, BlockAddress can have a BasicBlock operand.
This doesn't permute much, because if you have a ConstantExpr (or
anything more specific than Constant) we still know the operand has
to be a Constant.
llvm-svn: 85375
with multiple return values it inserts a PHI to merge them all together.
However, if the return values are all the same, it ends up with a pointless
PHI and this pointless PHI happens to really block SRoA from happening in
at least a silly C++ example written by Doug, but probably others. This
fixes rdar://7339069.
llvm-svn: 85206
GEPs (more than one non-zero index) into simple GEPs (at most one
non-zero index). In some simple experiments using this it's not
uncommon to see 3% overall code size wins, because it exposes
redundancies that can be eliminated, however it's tricky to use
because instcombine aggressively undoes the work that this pass does.
llvm-svn: 85144
strides for now, because it doesn't handle them correctly. This fixes a
miscompile of SingleSource/Benchmarks/Misc-C++/ray.
This problem was usually hidden because indvars transforms such induction
variables into negations of canonical induction variables.
llvm-svn: 85118
used elsewhere - an exit block is a block outside the loop branched to
from within the loop. An exiting block is a block inside the loop that
branches out.
llvm-svn: 85019
Update all analysis passes and transforms to treat free calls just like FreeInst.
Remove RaiseAllocations and all its tests since FreeInst no longer needs to be raised.
llvm-svn: 84987
Analysis/ConstantFolding.cpp. This doesn't change the behavior of
instcombine but makes other clients of ConstantFoldInstruction
able to handle loads. This was partially extracted from Eli's patch
in PR3152.
llvm-svn: 84836
Most changes are cleanup, but there is 1 correctness fix:
I fixed InstCombine so that the icmp is removed only if the malloc call is removed (which requires explicit removal because the Worklist won't DCE any calls since they can have side-effects).
llvm-svn: 84772
"In the existing code, if the load and the value to replace it with are
of different types *and* target data is available, it tries to use the
target data to coerce the replacement value to the type of the load.
Otherwise, it skips all effort to handle the type mismatch and just
feeds the wrongly-typed replacement value to replaceAllUsesWith, which
triggers an assertion.
The patch replaces it with an outer if checking for type mismatch, and
an inner if-else that checks whether target data is available and, if
not, returns false rather than trying to replace the load."
Patch by Kenneth Uildriks!
llvm-svn: 84739
the estimated code size and the number of blocks when deciding whether to
do a non-trivial unswitch. This protects it from some very undesirable
worst-case behavior on large numbers of loop-unswitchable conditions, such
as in the testcase in PR5259.
llvm-svn: 84661
When an incoming value for a PHI is updated, we must also updated all other
incoming values for the same BB to match, otherwise we create invalid PHIs.
llvm-svn: 84638
when the invoke had multiple return values: it set the lattice value only on the
extractvalue.
This caused the invoke's lattice value to remain the default (undefined), and
later propagated to extractvalue's operand, which incorrectly introduces
undefined behavior.
llvm-svn: 84637
where a loop's header is being split and it has predecessors which are not
contained by the most-nested loop which contains the loop.
This fixes PR5235.
llvm-svn: 84505
Update testcases that rely on malloc insts being present.
Also prematurely remove MallocInst handling from IndMemRemoval and RaiseAllocations to help pass tests in this incremental step.
llvm-svn: 84292
identifying the malloc as a non-array malloc. This broke GlobalOpt's optimization of stores of mallocs
to global variables.
The fix is to classify malloc's into 3 categories:
1. non-array mallocs
2. array mallocs whose array size can be determined
3. mallocs that cannot be determined to be of type 1 or 2 and cannot be optimized
getMallocArraySize() returns NULL for category 3, and all users of this function must avoid their
malloc optimization if this function returns NULL.
Eventually, currently unexpected codegen for computing the malloc's size argument will be supported in
isArrayMalloc() and getMallocArraySize(), extending malloc optimizations to those examples.
llvm-svn: 84199
don't bother every time going around the main worklist. This speeds up a
release-asserts opt -std-compile-opts on 403.gcc by about 4% (1.5s). It
seems to speed up the most expensive instances of instcombine by ~10%.
llvm-svn: 84171
instruction (which disqualifies stores, unreachable, etc) and at least the
first operand is a constant. This filters out a lot of obvious cases that
can't be folded. Also, switch the IRBuilder to a TargetFolder, which tries
harder.
llvm-svn: 84170
BasicBlocks, so that it doesn't blindly procede in the presence of
large individual BasicBlocks. This addresses a class of code-size
expansion problems.
llvm-svn: 83992
it to visit instructions from the start of the function to the
end of the function in the first path. This greatly speeds up
some pathological cases (e.g. PR5150).
Try #3, this time with some unneeded debug info stuff removed
which was causing dead pointers to be added to the worklist.
llvm-svn: 83818
it to visit instructions from the start of the function to the
end of the function in the first path. This greatly speeds up
some pathological cases (e.g. PR5150).
llvm-svn: 83814
into a shuffle even if it was used by another insertelement. If the
visitation order of instcombine was wrong, this would turn a chain of
insertelements into a chain of shufflevectors, which was quite painful.
Since CollectShuffleElements handles these cases, the code can just
be nuked.
llvm-svn: 83810
input the the mul is a zext from bool, just that it is all zeros
other than the low bit. This fixes some phase ordering issues
that would cause us to miss some xforms in mul.ll when the worklist
is visited differently.
llvm-svn: 83794
it to visit instructions from the start of the function to the
end of the function in the first path. This greatly speeds up
some pathological cases (e.g. PR5150).
llvm-svn: 83790
For now the metadata of sinked/hoisted instructions is still wrong, but that'll
be fixed when instructions will have debug metadata directly attached.
llvm-svn: 83786
done by condprop, but do it in a much more general form. The
basic idea is that we can do a limited form of tail duplication
in the case when we have a branch on a phi. Moving the branch
up in to the predecessor block makes instruction selection
much easier and encourages chained jump threadings.
llvm-svn: 83759
from GVN, this also speeds it up, inserts fewer PHI nodes (see the
testcase) and allows it to remove more loads (due to fewer PHI nodes
standing in the way).
llvm-svn: 83746
DemoteRegToStack. This makes it more efficient (because it isn't
creating a ton of load/stores that are eventually removed by a later
mem2reg), and more slightly more effective (because those load/stores
don't get in the way of threading).
llvm-svn: 83706
and that will make Caller too big to inline, see if it
might be better to inline Caller into its callers instead.
This situation is described in PR 2973, although I haven't
tried the specific case in SPASS.
llvm-svn: 83602
to declare that they preserve other passes without needing to pull in
additional header file or library dependencies. Convert MachineFunctionPass
and CodeGenLICM to make use of this.
llvm-svn: 83555
already on the worklist, and print Visited when an instruction is about to be
visited. Net, on one input, this reduced the output size by at least 9x.
llvm-svn: 83510
the new predicates I added) instead of going through a context and doing a
pointer comparison. Besides being cheaper, this allows a smart compiler
to turn the if sequence into a switch.
llvm-svn: 83297
that are phi nodes. Also tighten up FoldOpIntoPhi to treat constantexpr
operands to phis just like other variables, avoiding moving constantexpr
computations around.
Patch by Daniel Dunbar.
llvm-svn: 82913
from a piece of a large store when both are in the same block.
This allows clang to compile the testcase in PR4216 to this code:
_test_bitfield:
movl 4(%esp), %eax
movl %eax, %ecx
andl $-65536, %ecx
orl $32962, %eax
andl $40186, %eax
orl %ecx, %eax
ret
This is not ideal, but is a whole lot better than the code produced
by llvm-gcc:
_test_bitfield:
movw $-32574, %ax
orw 4(%esp), %ax
andw $-25350, %ax
movw %ax, 4(%esp)
movw 7(%esp), %cx
shlw $8, %cx
movzbl 6(%esp), %edx
orw %cx, %dx
movzwl %dx, %ecx
shll $16, %ecx
movzwl %ax, %eax
orl %ecx, %eax
ret
and dramatically better than that produced by gcc 4.2:
_test_bitfield:
pushl %ebx
call L3
"L00000000001$pb":
L3:
popl %ebx
movl 8(%esp), %eax
leal 0(,%eax,4), %edx
sarb $7, %dl
movl %eax, %ecx
andl $7168, %ecx
andl $-7201, %ebx
movzbl %dl, %edx
andl $1, %edx
sall $5, %edx
orl %ecx, %ebx
orl %edx, %ebx
andl $24, %eax
andl $-58336, %ebx
orl %eax, %ebx
orl $32962, %ebx
movl %ebx, %eax
popl %ebx
ret
llvm-svn: 82439
so that nonlocal and partially redundant loads can use it as well.
The testcase shows examples of craziness this can handle. This triggers
*many* times in 176.gcc.
llvm-svn: 82403
(and load -> load) when the base pointers must alias but when
they are different types. This occurs very very frequently in
176.gcc and other code that uses bitfields a lot.
llvm-svn: 82399
In getMallocArraySize(), fix bug in the case that array size is the product of 2 constants.
Extend isArrayMalloc() and getMallocArraySize() to handle case where malloc is used as char array.
Ensure that ArraySize in LowerAllocations::runOnBasicBlock() is correct type.
Extend Instruction::isSafeToSpeculativelyExecute() to handle malloc calls.
Add verification for malloc calls.
Reviewed by Dan Gohman.
llvm-svn: 82257
constants out of loops. These aren't covered by the regular LICM
pass, because in LLVM IR constants don't require separate
instructions. They're not always covered by the MachineLICM pass
either, because it doesn't know how to unfold folded constant-pool
loads. This is somewhat experimental at this point, and off by
default.
llvm-svn: 82076
more than one phi, since that leads to higher register pressure on
entry to the phi. This is especially problematic when the phi is in
a loop header, as it increases register pressure throughout the loop.
llvm-svn: 81993
argpromote to avoid invalidating an iterator. This fixes PR4977.
All clang tests now pass with expensive checking (on my system
at least).
llvm-svn: 81843
within the notional bounds of the static type of the getelementptr (which
is not the same as "inbounds") from GlobalOpt into a utility routine,
and use it in ConstantFold.cpp to check whether there are any mis-behaved
indices.
llvm-svn: 81478
loop exit edge -- new PHIs may be needed not only for the additional
splits that are made to preserve LoopSimplify form, but also for the
original split. Factor out the code that inserts new PHIs so that it
can be used for both. Remove LoopRotation.cpp's code for manually
updating LCSSA form, as it is now redundant. This fixes PR4934.
llvm-svn: 81363
that get created during loop unswitching, and fix SplitBlockPredecessors'
LCSSA updating code to create new PHIs instead of trying to just move
existing ones.
Also, optimize Loop::verifyLoop, since it gets called a lot. Use
searches on a sorted list of blocks instead of calling the "contains"
function, as is done in other places in the Loop class, since "contains"
does a linear search. Also, don't call verifyLoop from LoopSimplify or
LCSSA, as the PassManager is already calling verifyLoop as part of
LoopInfo's verifyAnalysis.
llvm-svn: 81221
extractelement operations into a bitcast of the pointer,
then a gep, then a scalar load. Disable this when the vector
only has one element, because it leads to infinite loops in
instcombine (PR4908).
This transformation seems like a really bad idea to me, as it
will likely disable CSE of vector load/stores etc and can be
better done in the code generator when profitable. This
goes all the way back to the first days of packed types,
r25299 specifically.
I'll let those people who care about the performance of vector
code decide what to do with this.
llvm-svn: 81185
compile-time constant integers or that are out of bounds for their
corresponding static array types. These can cause aliasing that
GlobalOpt assumes won't happen.
llvm-svn: 81165
is missing the inbounds flag. This is slightly conservative, but it
avoids problems with two constants pointing to the same address but
getting distinct entries in the Memory DenseMap.
llvm-svn: 81163
- I think there are more instances of this, but I think they are fixed in Dan's
incoming patch. This one was preventing me from doing a bugpoint reduction
though.
llvm-svn: 81103
Constant uniquing tables. This allows distinct ConstantExpr objects
with the same operation and different flags.
Even though a ConstantExpr "a + b" is either always overflowing or
never overflowing (due to being a ConstantExpr), it's still necessary
to be able to represent it both with and without overflow flags at
the same time within the IR, because the safety of the flag may
depend on the context of the use. If the constant really does overflow,
it wouldn't ever be safe to use with the flag set, however the use
may be in code that is never actually executed.
This also makes it possible to merge all the flags tests into a single test.
llvm-svn: 80998
instead of a bool argument, and to do the dominator check itself.
This makes it eaiser to use when DominatorTree information is
available.
llvm-svn: 80920
simplifylibcalls optimization is thus valid for C++ but not C.
It's not important enough to worry about for C++ apps, so just
remove it.
rdar://7191924
llvm-svn: 80887
Add statistics for regular edge profiling, this enables the comparation of the
number of edges inserted by regular and optimal edge profiling.
llvm-svn: 80668
for sanity. This didn't turn up any bugs.
Change CallGraphNode to maintain its "callsite" information in the
call edges list as a WeakVH instead of as an instruction*. This fixes
a broad class of dangling pointer bugs, and makes CallGraph have a number
of useful invariants again. This fixes the class of problem indicated
by PR4029 and PR3601.
llvm-svn: 80663
changes: SimplifyDemandedBits can't use the builder yet because it
has the wrong insertion point. This fixes a crash building
MultiSource/Benchmarks/PAQ8p
llvm-svn: 80537
instead of CallGraphNode*'s. This also papers over a callgraph
problem where a pass (in this case, MemCpyOpt) introduces a new
function into the module (llvm.memset.i64) but doesn't add it to
the call graph (nor should it, since it is a function pass).
While it might be a good idea for MemCpyOpt to not synthesize
functions in a runOnFunction(), there is no need for FunctionAttrs
to be boneheaded, so fix it there. This fixes an assertion building
176.gcc.
llvm-svn: 80535
indirect function pointer, inline it, then go to delete the body.
The problem is that the callgraph had other references to the function,
though the inliner had no way to know it, so we got a dangling pointer
and an invalid iterator out of the deal.
The fix to this is pretty simple: stop the inliner from deleting the
function by knowing that there are references to it. Do this by making
CallGraphNodes contain a refcount. This requires moving deletion of
available_externally functions to the module-level cleanup sweep where
it belongs.
llvm-svn: 80533
argpromotion and structretpromote. Basically, when replacing
a function, they used the 'changeFunction' api which changes
the entry in the function map (and steals/reuses the callgraph
node).
This has some interesting effects: first, the problem is that it doesn't
update the "callee" edges in any callees of the function in the call graph.
Second, this covers for a major problem in all the CGSCC pass stuff, which
is that it is completely broken when functions are deleted if they *don't*
reuse a CGN. (there is a cute little fixme about this though :).
This patch changes the protocol that CGSCC passes must obey: now the CGSCC
pass manager copies the SCC and preincrements its iterator to avoid passes
invalidating it. This allows CGSCC passes to mutate the current SCC. However
multiple passes may be run on that SCC, so if passes do this, they are now
required to *update* the SCC to be current when they return.
Other less interesting parts of this patch are that it makes passes update
the CG more directly, eliminates changeFunction, and requires clients of
replaceCallSite to specify the new callee CGN if they are changing it.
llvm-svn: 80527
is itself a bitcast. Since we have gep(bitcast(bitcast(y))) in this
case, just wait for the two bitcasts to get zapped. This prevents
instcombine from confusing some aliasing stuff, and allows it to
directly eliminate the load in the testcase.
llvm-svn: 80508
workslist and is set to insert new instructions before the current one.
Convert a bunch of stuff that used to call InsertNewInstBefore over to
use it, greatly simplifying code and making it more natural.
There is still a lot more to go, but this is a good start.
llvm-svn: 80492
if the operand is not an instruction.
Simplify most uses of AddOperandsToWorkList to use AddValue and
inline it into the one remaining callsite.
llvm-svn: 80488
former looks too much like AddUsersToWorkList and keeps
confusing me.
Remove AddSoonDeadInstToWorklist and change its two callers
to do the same thing in a simpler way.
llvm-svn: 80486
into their callers. simplify ReplaceInstUsesWith. Make
EraseInstFromFunction only add operands to the worklist if
there aren't too many of them (this was a scalability win
for crazy programs that was only infrequently enforced).
Switch more code to using EraseInstFromFunction instead of
duplicating it inline. Change some fcmp/icmp optimizations
to modify fcmp/icmp in place instead of creating a new one
and deleting the old one just to change the predicate.
llvm-svn: 80483
This implements the maximum spanning tree algorithm on CFGs according to
weights given by the ProfileEstimator. This is then used to implement Optimal
Edge Profiling.
llvm-svn: 80358
calls into a function and if the calls bring in arrays, try to merge
them together to reduce stack size. For example, in the testcase
we'd previously end up with 4 allocas, now we end up with 2 allocas.
As described in the comments, this is not really the ideal solution
to this problem, but it is surprisingly effective. For example, on
176.gcc, we end up eliminating 67 arrays at "gccas" time and another
24 at "llvm-ld" time.
One piece of concern that I didn't look into: at -O0 -g with
forced inlining this will almost certainly result in worse debug
info. I think this is acceptable though given that this is a case
of "debugging optimized code", and we don't want debug info to
prevent the optimizer from doing things anyway.
llvm-svn: 80215
and introduce a new Instruction::isIdenticalTo which tests for full
identity, including the SubclassOptionalData flags. Also, fix the
Instruction::clone implementations to preserve the SubclassOptionalData
flags. Finally, teach several optimizations how to handle
SubclassOptionalData correctly, given these changes.
This fixes the counterintuitive behavior of isIdenticalTo not comparing
the full value, and clone not returning an identical clone, as well as
some subtle bugs that could be caused by these.
Thanks to Nick Lewycky for reporting this, and for an initial patch!
llvm-svn: 80038
sinking code, since they are special. If the loop preheader happens
to be the entry block of a function, don't sink static allocas
out of it. This fixes PR4775.
llvm-svn: 80010
of an extracted block contains a PHI using a value defined in the extracted region.
With this patch, the partial inliner now passes MultiSource/Applications.
llvm-svn: 79963
try to use i686-darwin to build for arm-eabi, you'll quickly run into
several false assumptions that the target OS must be the same as the
host OS. These patches split $(OS) into $(HOST_OS) and $(TARGET_OS) to
help builds like "make check" and the test-suite able to cross
compile. Along the way a target of *-unknown-eabi is defined as
"Freestanding" so that TARGET_OS checks have something to work with.
Patch by Sandeep Patel!
llvm-svn: 79296
vector (&Formals[0]). With this change llvm-gcc builds
with expensive checking enabled for C, C++ and Fortran.
While there, change a std::vector into a SmallVector.
This is partly gratuitous, but mostly because not all
STL vector implementations define the data method (and
it should be faster).
llvm-svn: 79237
unfoldable references to a PHI node in the block being folded, and disable
the transformation in that case. The correct transformation of such PHI
nodes depends on whether BB dominates Succ, and dominance is expensive
to compute here. (Alternatively, it's possible to check whether any
uses are live, but that's also essentially a dominance calculation.
Another alternative is to use reg2mem, but it probably isn't a good idea to
use that in simplifycfg.)
Also, remove some incorrect code from CanPropagatePredecessorsForPHIs
which is made unnecessary with this patch: it didn't consider the case
where a PHI node in BB has multiple uses.
llvm-svn: 79174
the new load by the old load instead of by the extract element because
a store could have occurred between the load and extract element.
llvm-svn: 78891
- Part of optimal static profiling patch sequence by Andreas Neustifter.
- Store edge, block, and function information separately for each functions
(instead of in one giant map).
- Return frequencies as double instead of int, and use a sentinel value for
missing information.
llvm-svn: 78477
appropriate. Patch per report on llvmdev. No testcase because the
original report didn't come with a testcase, and I can't come up with a case
that actually fails.
llvm-svn: 77986
a Twine, e.g., for names).
- I am a little ambivalent about this; we don't want the string conversion of
utostr, but using overload '+' mixed with string and integer arguments is
sketchy. On the other hand, this particular usage is something of an idiom.
llvm-svn: 77579
- Some clients which used DOUT have moved to DEBUG. We are deprecating the
"magic" DOUT behavior which avoided calling printing functions when the
statement was disabled. In addition to being unnecessary magic, it had the
downside of leaving code in -Asserts builds, and of hiding potentially
unnecessary computations.
llvm-svn: 77019
- Yay for '-'s and simplifications!
- I kept StringMap::GetOrCreateValue for compatibility purposes, this can
eventually go away. Likewise the StringMapEntry Create functions still follow
the old style.
- NIFC.
llvm-svn: 76888
also apply to vectors. This allows us to compile this:
#include <emmintrin.h>
__m128i a(__m128 a, __m128 b) { return a==a & b==b; }
__m128i b(__m128 a, __m128 b) { return a!=a | b!=b; }
to:
_a:
cmpordps %xmm1, %xmm0
ret
_b:
cmpunordps %xmm1, %xmm0
ret
with clang instead of to a ton of horrible code.
llvm-svn: 76863
Daniel Dunbar