The penalty is currently getting applied in a bunch of places where it
doesn't make sense, like bitcasts (which are free) and calls (which
were getting the call penalty applied twice). Instead, just apply the
penalty to binary operators and floating-point casts.
While I'm here, also fix getFPOpCost() to do the right thing in more
cases, so we don't have to dig into function attributes.
Differential Revision: https://reviews.llvm.org/D41522
llvm-svn: 321332
This patch modifies the indirect call promotion utilities by exposing and using
an unconditional call promotion interface. The unconditional promotion
interface (i.e., call promotion without creating an if-then-else) can be used
if it's known that an indirect call has only one possible callee. The existing
conditional promotion interface uses this unconditional interface to promote an
indirect call after it has been versioned and placed within the "then" block.
A consequence of unconditional promotion is that the fix-up operations for phi
nodes in the normal destination of invoke instructions are changed. This is
necessary because the existing implementation assumed that an invoke had been
versioned, creating a "merge" block where a return value bitcast could be
placed. In the new implementation, the edge between a promoted invoke's parent
block and its normal destination is split if needed to add a bitcast for the
return value. If the invoke is also versioned, the phi node merging the return
value of the promoted and original invoke instructions is placed in the "merge"
block.
Differential Revision: https://reviews.llvm.org/D40751
llvm-svn: 321210
Summary:
The function section prefix for PGO based layout (e.g. hot/unlikely)
should look at the hotness of all blocks not just the entry BB.
A function with a cold entry but a very hot loop should be placed in the
hot section, for example, so that it is located close to other hot
functions it may call. For SamplePGO it was already looking at the
branch weights on calls, and I made that code conditional on whether
this is SamplePGO since it was essentially a noop for instrumentation
PGO anyway.
Reviewers: davidxl
Subscribers: eraman, llvm-commits
Differential Revision: https://reviews.llvm.org/D41395
llvm-svn: 321197
canVectorize is only checking if the loop has a normalized pre-header if DoExtraAnalysis is true.
This doesn't make sense to me because reporting analysis information shouldn't alter legality
checks. This is probably the result of a last minute minor change before committing (?).
Patch by Diego Caballero.
Reviewed By: fhahn
Differential Revision: https://reviews.llvm.org/D40973
llvm-svn: 321172
This teaches memcpyopt to make a non-local memdep query when a local query
indicates that the dependency is non-local. This notably allows it to
eliminate many more llvm.memcpy calls in common Rust code, often by 20-30%.
This is r319482 and r319483, along with fixes for PR35519: fix the
optimization that merges stores into memsets to preserve cached memdep
info, and fix memdep's non-local caching strategy to not assume that larger
queries are always more conservative than smaller ones.
Fixes PR28958 and PR35519.
Differential Revision: https://reviews.llvm.org/D40802
llvm-svn: 321138
PRE in JumpThreading should not be able to hoist copy of non-speculable loads across
instructions that don't always transfer execution to their successors, otherwise they may
introduce an unsafe load which otherwise would not be executed.
The same problem for GVN was fixed as rL316975.
Differential Revision: https://reviews.llvm.org/D40347
llvm-svn: 321063
There are cases when two tags with different base types denote
accesses to the same direct or indirect member of a structure
type. Currently, merging of such tags results in a tag that
represents an access to an object that has the type of that
member. This patch changes this so that if one of the accesses
encloses the other, then the generic tag is the one of the
enclosed access.
Differential Revision: https://reviews.llvm.org/D39557
llvm-svn: 321019
Summary:
In r277849, getEntryCount was changed to return None when the entry
count was 0, specifically for SamplePGO where it means no samples were
recorded. However, for instrumentation PGO a 0 entry count should be
returned directly, since it does mean that the function was completely
cold. Otherwise we end up treating these functions conservatively
in isFunctionEntryCold() and isColdBB().
Instead, for SamplePGO use -1 when there are no samples, and change
getEntryCount to return None when the value is -1.
Reviewers: danielcdh, davidxl
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D41307
llvm-svn: 321018
This patch introduce a switch to control splitting of non-whole-alloca slices with default off.
The switch will be default on again after fixing an issue reported in PR35657.
llvm-svn: 320958
When we put the value in select placeholder we must pass
the value through simplification tracker due to the value might
be already simplified and erased.
This is a fix for PR35658.
Reviewers: john.brawn, uabelho
Reviewed By: john.brawn
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D41251
llvm-svn: 320956
We want to do this for 2 reasons:
1. Value tracking does not recognize the ashr variant, so it would fail to match for cases like D39766.
2. DAGCombiner does better at producing optimal codegen when we have the cmp+sel pattern.
More detail about what happens in the backend:
1. DAGCombiner has a generic transform for all targets to convert the scalar cmp+sel variant of abs
into the shift variant. That is the opposite of this IR canonicalization.
2. DAGCombiner has a generic transform for all targets to convert the vector cmp+sel variant of abs
into either an ABS node or the shift variant. That is again the opposite of this IR canonicalization.
3. DAGCombiner has a generic transform for all targets to convert the exact shift variants produced by #1 or #2
into an ISD::ABS node. Note: It would be an efficiency improvement if we had #1 go directly to an ABS node
when that's legal/custom.
4. The pattern matching above is incomplete, so it is possible to escape the intended/optimal codegen in a
variety of ways.
a. For #2, the vector path is missing the case for setlt with a '1' constant.
b. For #3, we are missing a match for commuted versions of the shift variants.
5. Therefore, this IR canonicalization can only help get us to the optimal codegen. The version of cmp+sel
produced by this patch will be recognized in the DAG and converted to an ABS node when possible or the
shift sequence when not.
6. In the following examples with this patch applied, we may get conditional moves rather than the shift
produced by the generic DAGCombiner transforms. The conditional move is created using a target-specific
decision for any given target. Whether it is optimal or not for a particular subtarget may be up for debate.
define i32 @abs_shifty(i32 %x) {
%signbit = ashr i32 %x, 31
%add = add i32 %signbit, %x
%abs = xor i32 %signbit, %add
ret i32 %abs
}
define i32 @abs_cmpsubsel(i32 %x) {
%cmp = icmp slt i32 %x, zeroinitializer
%sub = sub i32 zeroinitializer, %x
%abs = select i1 %cmp, i32 %sub, i32 %x
ret i32 %abs
}
define <4 x i32> @abs_shifty_vec(<4 x i32> %x) {
%signbit = ashr <4 x i32> %x, <i32 31, i32 31, i32 31, i32 31>
%add = add <4 x i32> %signbit, %x
%abs = xor <4 x i32> %signbit, %add
ret <4 x i32> %abs
}
define <4 x i32> @abs_cmpsubsel_vec(<4 x i32> %x) {
%cmp = icmp slt <4 x i32> %x, zeroinitializer
%sub = sub <4 x i32> zeroinitializer, %x
%abs = select <4 x i1> %cmp, <4 x i32> %sub, <4 x i32> %x
ret <4 x i32> %abs
}
> $ ./opt -instcombine shiftyabs.ll -S | ./llc -o - -mtriple=x86_64 -mattr=avx
> abs_shifty:
> movl %edi, %eax
> negl %eax
> cmovll %edi, %eax
> retq
>
> abs_cmpsubsel:
> movl %edi, %eax
> negl %eax
> cmovll %edi, %eax
> retq
>
> abs_shifty_vec:
> vpabsd %xmm0, %xmm0
> retq
>
> abs_cmpsubsel_vec:
> vpabsd %xmm0, %xmm0
> retq
>
> $ ./opt -instcombine shiftyabs.ll -S | ./llc -o - -mtriple=aarch64
> abs_shifty:
> cmp w0, #0 // =0
> cneg w0, w0, mi
> ret
>
> abs_cmpsubsel:
> cmp w0, #0 // =0
> cneg w0, w0, mi
> ret
>
> abs_shifty_vec:
> abs v0.4s, v0.4s
> ret
>
> abs_cmpsubsel_vec:
> abs v0.4s, v0.4s
> ret
>
> $ ./opt -instcombine shiftyabs.ll -S | ./llc -o - -mtriple=powerpc64le
> abs_shifty:
> srawi 4, 3, 31
> add 3, 3, 4
> xor 3, 3, 4
> blr
>
> abs_cmpsubsel:
> srawi 4, 3, 31
> add 3, 3, 4
> xor 3, 3, 4
> blr
>
> abs_shifty_vec:
> vspltisw 3, -16
> vspltisw 4, 15
> vsubuwm 3, 4, 3
> vsraw 3, 2, 3
> vadduwm 2, 2, 3
> xxlxor 34, 34, 35
> blr
>
> abs_cmpsubsel_vec:
> vspltisw 3, -16
> vspltisw 4, 15
> vsubuwm 3, 4, 3
> vsraw 3, 2, 3
> vadduwm 2, 2, 3
> xxlxor 34, 34, 35
> blr
>
Differential Revision: https://reviews.llvm.org/D40984
llvm-svn: 320921
Changes to the original scalar loop during LV code gen cause the return value
of Legal->isConsecutivePtr() to be inconsistent with the return value during
legal/cost phases (further analysis and information of the bug is in D39346).
This patch is an alternative fix to PR34965 following the CM_Widen approach
proposed by Ayal and Gil in D39346. It extends InstWidening enum with
CM_Widen_Reverse to properly record the widening decision for consecutive
reverse memory accesses and, consequently, get rid of the
Legal->isConsetuviePtr() call in LV code gen. I think this is a simpler/cleaner
solution to PR34965 than the one in D39346.
Fixes PR34965.
Patch by Diego Caballero, thanks!
Differential Revision: https://reviews.llvm.org/D40742
llvm-svn: 320913
Summary:
1. Use stream 0 only for combined module. Previously if combined module was not
processes ThinLTO used the stream for own output. However small changes in input,
could trigger combined module and shuffle outputs making life of llvm::LTO harder.
2. Always process combined module and write output to stream 0. Processing empty
combined module is cheap and allows llvm::LTO users to avoid implementing processing
which is already done in llvm::LTO.
Subscribers: mehdi_amini, inglorion, eraman, hiraditya
Differential Revision: https://reviews.llvm.org/D41267
llvm-svn: 320905
When unsafe algerbra is allowed calls to cabs(r) can be replaced by:
sqrt(creal(r)*creal(r) + cimag(r)*cimag(r))
Patch by Paul Walker, thanks!
Differential Revision: https://reviews.llvm.org/D40069
llvm-svn: 320901
Summary:
This implements a missing feature to allow importing of aliases, which
was previously disabled because alias cannot be available_externally.
We instead import an alias as a copy of its aliasee.
Some additional work was required in the IndexBitcodeWriter for the
distributed build case, to ensure that the aliasee has a value id
in the distributed index file (i.e. even when it is not being
imported directly).
This is a performance win in codes that have many aliases, e.g. C++
applications that have many constructor and destructor aliases.
Reviewers: pcc
Subscribers: mehdi_amini, inglorion, eraman, llvm-commits
Differential Revision: https://reviews.llvm.org/D40747
llvm-svn: 320895
This recommits r320823 reverted due to the test failure in sink-foldable.ll and
an unused variable. Added "REQUIRES: aarch64-registered-target" in the test
and removed unused variable.
Original commit message:
Continue trying to sink an instruction if its users in the loop is foldable.
This will allow the instruction to be folded in the loop by decoupling it from
the user outside of the loop.
Reviewers: hfinkel, majnemer, davidxl, efriedma, danielcdh, bmakam, mcrosier
Reviewed By: hfinkel
Subscribers: javed.absar, bmakam, mcrosier, llvm-commits
Differential Revision: https://reviews.llvm.org/D37076
llvm-svn: 320858
This recommit r320823 after fixing a test failure.
Original commit message:
Continue trying to sink an instruction if its users in the loop is foldable.
This will allow the instruction to be folded in the loop by decoupling it from
the user outside of the loop.
Reviewers: hfinkel, majnemer, davidxl, efriedma, danielcdh, bmakam, mcrosier
Reviewed By: hfinkel
Subscribers: javed.absar, bmakam, mcrosier, llvm-commits
Differential Revision: https://reviews.llvm.org/D37076
llvm-svn: 320833
Summary:
Continue trying to sink an instruction if its users in the loop is foldable.
This will allow the instruction to be folded in the loop by decoupling it from
the user outside of the loop.
Reviewers: hfinkel, majnemer, davidxl, efriedma, danielcdh, bmakam, mcrosier
Reviewed By: hfinkel
Subscribers: javed.absar, bmakam, mcrosier, llvm-commits
Differential Revision: https://reviews.llvm.org/D37076
llvm-svn: 320823
SROA analysis of InlineCost can figure out that some stores can be removed
after inlining and then the repeated loads clobbered by these stores are also
free. This patch finds these clobbered loads and adjust the inline cost
accordingly.
Differential Revision: https://reviews.llvm.org/D33946
llvm-svn: 320814
Summary:
The port is nearly straightforward.
The only complication is related to the analyses handling,
since one of the analyses used in this module pass is domtree,
which is a function analysis. That requires asking for the results
of each function and disallows a single interface for run-on-module
pass action.
Decided to copy-paste the main body of this pass.
Most of its code is requesting analyses anyway, so not that much
of a copy-paste.
The rest of the code movement is to transform all the implementation
helper functions like stripNonValidData into non-member statics.
Extended all the related LLVM tests with new-pass-manager use.
No failures.
Reviewers: sanjoy, anna, reames
Reviewed By: anna
Subscribers: skatkov, llvm-commits
Differential Revision: https://reviews.llvm.org/D41162
llvm-svn: 320796
We cannot move the insertion point to header if SCEV contains div/rem
operations due to they may go over check for zero denominator.
Reviewers: sanjoy, mkazantsev, sebpop
Reviewed By: sebpop
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D41229
llvm-svn: 320789
This should solve:
https://bugs.llvm.org/show_bug.cgi?id=34603
...by preventing SimplifyCFG from altering redundant instructions before early-cse has a chance to run.
It changes the default (canonical-forming) behavior of SimplifyCFG, so we're only doing the
sinking transform later in the optimization pipeline.
Differential Revision: https://reviews.llvm.org/D38566
llvm-svn: 320749
In SLPVectorizer, the vector build instructions (insertvalue for aggregate type) is passed to BoUpSLP.buildTree, it is treated as UserIgnoreList, so later in cost estimation, the cost of these instructions are not counted.
For aggregate value, later usage are more likely to be done in scalar registers, either used as individual scalars or used as a whole for function call or return value. Ignore scalar extraction instructions may cause too aggressive vectorization for aggregate values, and slow down performance. So for vectorization of aggregate value, the scalar extraction instructions are required in cost estimation.
Differential Revision: https://reviews.llvm.org/D41139
llvm-svn: 320736
Summary:
The function is meant to recurse until it comes upon the
phi it's looking for. However, with the current condition,
it will recurse until it finds anything _but_ the phi.
The function will even fail for simple cases like:
%i = phi i32 [ %inc, %loop ], ...
...
%inc = add i32 %i, 1
because the base condition will not happen when the phi
is recursed to, and the recursion will end with a 'false'
result since the previous instruction is a phi.
Reviewers: sanjoy, atrick
Reviewed By: sanjoy
Subscribers: Ka-Ka, bjope, llvm-commits
Committing on behalf of: Bevin Hansson (bevinh)
Differential Revision: https://reviews.llvm.org/D40946
llvm-svn: 320700
This patch fix this FIXME in visitPHI()
FIXME: We should potentially be tracking values through phi nodes,
especially when they collapse to a single value due to deleted CFG edges
during inlining.
Differential Revision: https://reviews.llvm.org/D38594
llvm-svn: 320699
Summary:
Passing AliasAnalysis results instead of nullptr appears to work just fine.
A couple new-pass-manager tests updated to align with new order of analyses.
Reviewers: chandlerc, spatel, craig.topper
Reviewed By: chandlerc
Subscribers: mehdi_amini, eraman, llvm-commits
Differential Revision: https://reviews.llvm.org/D41203
llvm-svn: 320687
D30041 extended SCEVPredicateRewriter to improve handling of Phi nodes whose
update chain involves casts; PSCEV can now build an AddRecurrence for some
forms of such phi nodes, under the proper runtime overflow test. This means
that we can identify such phi nodes as an induction, and the loop-vectorizer
can now vectorize such inductions, however inefficiently. The vectorizer
doesn't know that it can ignore the casts, and so it vectorizes them.
This patch records the casts in the InductionDescriptor, so that they could
be marked to be ignored for cost calculation (we use VecValuesToIgnore for
that) and ignored for vectorization/widening/scalarization (i.e. treated as
TriviallyDead).
In addition to marking all these casts to be ignored, we also need to make
sure that each cast is mapped to the right vector value in the vector loop body
(be it a widened, vectorized, or scalarized induction). So whenever an
induction phi is mapped to a vector value (during vectorization/widening/
scalarization), we also map the respective cast instruction (if exists) to that
vector value. (If the phi-update sequence of an induction involves more than one
cast, then the above mapping to vector value is relevant only for the last cast
of the sequence as we allow only the "last cast" to be used outside the
induction update chain itself).
This is the last step in addressing PR30654.
llvm-svn: 320672
Summary:
See D37528 for a previous (non-deferred) version of this
patch and its description.
Preserves dominance in a deferred manner using a new class
DeferredDominance. This reduces the performance impact of
updating the DominatorTree at every edge insertion and
deletion. A user may call DDT->flush() within JumpThreading
for an up-to-date DT. This patch currently has one flush()
at the end of runImpl() to ensure DT is preserved across
the pass.
LVI is also preserved to help subsequent passes such as
CorrelatedValuePropagation. LVI is simpler to maintain and
is done immediately (not deferred). The code to perfom the
preversation was minimally altered and was simply marked
as preserved for the PassManager to be informed.
This extends the analysis available to JumpThreading for
future enhancements. One example is loop boundary threading.
Reviewers: dberlin, kuhar, sebpop
Reviewed By: kuhar, sebpop
Subscribers: hiraditya, llvm-commits
Differential Revision: https://reviews.llvm.org/D40146
llvm-svn: 320612
w.r.t. the paper
"A Practical Improvement to the Partial Redundancy Elimination in SSA Form"
(https://sites.google.com/site/jongsoopark/home/ssapre.pdf)
Proper dominance check was missing here, so having a loopinfo should not be required.
Committing this diff as this fixes the bug, if there are
further concerns, I'll be happy to work on them.
Differential Revision: https://reviews.llvm.org/D39781
llvm-svn: 320607
Summary:
This patch tries to vectorize loads of consecutive memory accesses, accessed
in non-consecutive or jumbled way. An earlier attempt was made with patch D26905
which was reverted back due to some basic issue with representing the 'use mask' of
jumbled accesses.
This patch fixes the mask representation by recording the 'use mask' in the usertree entry.
Change-Id: I9fe7f5045f065d84c126fa307ef6ebe0787296df
Reviewers: mkuper, loladiro, Ayal, zvi, danielcdh
Reviewed By: Ayal
Subscribers: mgrang, dcaballe, hans, mzolotukhin
Differential Revision: https://reviews.llvm.org/D36130
llvm-svn: 320548
Summary:
This change makes the call site creation more general if any of the
arguments is predicated on a condition in the call site's predecessors.
If we find a callsite, that potentially can be split, we collect the set
of conditions for the call site's predecessors (currently only 2
predecessors are allowed). To do that, we traverse each predecessor's
predecessors as long as it only has single predecessors and record the
condition, if it is relevant to the call site. For each condition, we
also check if the condition is taken or not. In case it is not taken,
we record the inverse predicate.
We use the recorded conditions to create the new call sites and split
the basic block.
This has 2 benefits: (1) it is slightly easier to see what is going on
(IMO) and (2) we can easily extend it to handle more complex control
flow.
Reviewers: davidxl, junbuml
Reviewed By: junbuml
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D40728
llvm-svn: 320547
Summary:
If we have pattern `store (load(bitcast(select (cmp(V1, V2), &V1,
&V2)))), bitcast)`, but the load is used in other instructions, it leads
to looping in InstCombiner. Patch adds additional check that all users
of the load instructions are stores and then replaces all uses of load
instruction by the new one with new type.
Reviewers: RKSimon, spatel, majnemer
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D41072
llvm-svn: 320525
This algorithm (explained more in the source code) takes into account
global redundancies by building a "pair map" to find common subexprs.
The primary motivation of this is to handle situations like
foo = (a * b) * c
bar = (a * d) * c
where we currently don't identify that "a * c" is redundant.
Accordingly, it prioritizes the emission of a * c so that CSE
can remove the redundant calculation later.
Does not change the actual reassociation algorithm -- only the
order in which the reassociated operand chain is reconstructed.
Gives ~1.5% floating point math instruction count reduction on
a large offline suite of graphics shaders.
llvm-svn: 320515
Eli Friedman