SHF_GROUP bit doesn't make sense in executables or DSOs, so linkers are
expected to remove that bit from section flags. We did that when we create
output sections.
This patch is to do that earlier than before. Now the flag is dropped when
we instantiate input section objects.
This change improves ICF. Previously, two sections that differ only in
SHF_GROUP flag were not merged, because when the control reached ICF,
the flag was still there. Now the flag is dropped before reaching to ICF,
so the difference is ignored naturally.
This issue was found by pcc.
Differential Revision: https://reviews.llvm.org/D34074
llvm-svn: 305134
Previously we would merge relocation sections by name.
That did not work in some cases, like testcase shows.
Patch implements logic to merge relocation sections if their target
sections were merged into the same output section.
Differential revision: https://reviews.llvm.org/D33824
llvm-svn: 304886
This creates a new library called BinaryFormat that has all of
the headers from llvm/Support containing structure and layout
definitions for various types of binary formats like dwarf, coff,
elf, etc as well as the code for identifying a file from its
magic.
Differential Revision: https://reviews.llvm.org/D33843
llvm-svn: 304864
Previously LLD would fail for case when there are multiple comdats and -r.
That happened because it merged all ".group" (SHT_GROUP) sections into single
output, producing broken result. Such sections may have similar name, alignment and flags
and other properties. We need to produce separate output section for each such input one.
Differential revision: https://reviews.llvm.org/D33643
llvm-svn: 304769
This change alters the sorting for OutputSections with the SHF_LINK_ORDER
flag in OutputSection::finalize() to use the InputSectionDescription
representation and not the OutputSection::Sections representation.
Differential revision: https://reviews.llvm.org/D33772
llvm-svn: 304700
Spec says: (http://www.sco.com/developers/gabi/latest/ch4.sheader.html)
sh_info
This member holds extra information, whose interpretation depends on the section type.
If the sh_flags field for this section header includes the attribute SHF_INFO_LINK,
then this member represents a section header table index.
SHF_INFO_LINK
The sh_info field of this section header holds a section header table index.
Since sh_info for SHT_REL[A] sections should contain the section header index of the
section to which the relocation applies, this is
consistent with spec to put this flag. Behavior matches both bfd and gold as well.
Differential revision: https://reviews.llvm.org/D33763
llvm-svn: 304531
Before InputSectionBase had an OutputSection pointer, but that was not
always valid. For example, if it was a merge section one actually had
to look at MergeSec->OutSec.
This was brittle and caused bugs like the one fixed by r304260.
We now have a single Parent pointer that points to an OutputSection
for InputSection, but to a SyntheticSection for merge sections and
.eh_frame. This makes it impossible to accidentally access an invalid
OutSec.
llvm-svn: 304338
We would crash if a SHF_LINK_ORDER section pointed to a non
InputSection section. Since those sections are not merged in order,
SHF_LINK_ORDER is pretty meaningless and we can error on that case.
llvm-svn: 304327
This is PR33052, "Bug 33052 - -r eats comdats ".
To fix it I stop removing group section from out when -r is given
and fixing SHT_GROUP content when writing it just like we do some
other fixup, e.g. for Rel[a]. (it needs fix for section indices that
are in group).
Differential revision: https://reviews.llvm.org/D33485
llvm-svn: 304140
In this way, the content and the flag is always consistent, which I
think better than removing the bit when input sections reaches the Writer.
llvm-svn: 303926
This reduces how many times we have to map from OutputSection to
OutputSectionCommand. It is a required step to moving
clearOutputSections earlier.
In order to always use writeTo in OutputSectionCommand we have to call
fabricateDefaultCommands for -r links and move section compression
after it.
llvm-svn: 303784
Previously we were not printing out the type of the incompatible section
which made it difficult to determine what the problem was.
The error message format has been change to the following:
error: section type mismatch for .shstrtab
>>> <internal>:(.shstrtab): SHT_STRTAB
>>> output section .shstrtab: Unknown
Patch by Alexander Richardson.
Differential Revision: https://reviews.llvm.org/D32488
llvm-svn: 302694
Previously it was impossible to use linkerscript with --compress-debug-sections
because of assert failture:
Assertion failed: isFinalized(), file C:\llvm\lib\MC\StringTableBuilder.cpp, line 64
Patch fixes the issue
llvm-svn: 302413
We can set SectionIndex tentatively as we process the linker script
instead of looking it repeatedly.
In general we should try to have as few name lookups as possible.
llvm-svn: 302299
We were already pretty close, the one exception was when a name was
reused in another SECTIONS directive:
SECTIONS {
.text : { *(.text) }
.data : { *(.data) }
}
SECTIONS {
.data : { *(other) }
}
In this case we would create a single .data and magically output
"other" while looking at the first OutputSectionCommand.
We now create two .data sections. This matches what gold does. If we
really want to create a single one, we should change the parser so that
the above is parsed as if the user had written
SECTIONS {
.text : { *(.text) }
.data : { *(.data) *(other)}
}
That is, there should be only one OutputSectionCommand for .data and
it would have two InputSectionDescriptions.
By itself this patch makes the code a bit more complicated, but is an
important step in allowing assignAddresses to operate just on the
linker script.
llvm-svn: 301484
Previously we were not printing out the flags of the incompatible
section which made it difficult to determine what the problem was.
The error message format has been change to the following:
error: incompatible section flags for .bar
>>> /foo/bar/incompatible-section-flags.s.tmp.o:(.bar): 0x403
>>> output section .bar: 0x3
Patch by Alexander Richardson.
Differential Revision: https://reviews.llvm.org/D32484
llvm-svn: 301319
createHeader didn't use data members of Elf_Chdr type and write
directly to a given buffer. That is not a good practice because
the function had a knowledge of the struct layout.
llvm-svn: 300674
Patch implements --compress-debug-sections=zlib.
In compare with D20211 (a year old patch, abandoned), it implementation
uses streaming and fully reimplemented, does not support zlib-gnu for
simplification.
This is PR32308.
Differential revision: https://reviews.llvm.org/D31941
llvm-svn: 300444
Executable sections should not be padded with zero by default. On some
architectures, 0x00 is the start of a valid instruction sequence, so can confuse
disassembly between InputSections (and indeed the start of the next InputSection
in some situations). Further, in the case of misjumps into padding, padding may
start to be executed silently.
On x86, the "0xcc" byte represents the int3 trap instruction. It is a single
byte long so can serve well as padding. This change switches x86 (and x86_64) to
use this value for padding in executable sections, if no linker script directive
overrides it. It also puts the behaviour into place making it easy to change the
behaviour of other targets when desired. I do not know the relevant instruction
sequences for trap instructions on other targets however, so somebody should add
this separately.
Because the old behaviour simply wrote padding in the whole section before
overwriting most of it, this change also modifies the padding algorithm to write
padding only where needed. This in turn has caused a small behaviour change with
regards to what values are written via Fill commands in linker scripts, bringing
it into line with ld.bfd. The fill value is now written starting from the end of
the previous block, which means that it always starts from the first byte of the
fill, whereas the old behaviour meant that the padding sometimes started mid-way
through the fill value. See the test changes for more details.
Reviewed by: ruiu
Differential Revision: https://reviews.llvm.org/D30886
Bugzilla: http://bugs.llvm.org/show_bug.cgi?id=32227
llvm-svn: 299635
We had a few Config member functions that returns configuration values.
For example, we had is64() which returns true if the target is 64-bit.
The return values of these functions are constant and never change.
This patch is to compute them only once to make it clear that they'll
never change.
llvm-svn: 298168
Was fixed, details on review page.
Original commit message:
That removes CopyRelSection class completely, making
Bss/BssRelRo to be just regular synthetics.
This is splitted from D30541 and polished.
Difference from D30541 that all logic of SharedSymbol
converting to DefinedRegular was removed for now and
probably will be posted as separate patch.
Differential revision: https://reviews.llvm.org/D30892
llvm-svn: 298062
That removes CopyRelSection class completely, making
Bss/BssRelRo to be just regular synthetics.
This is splitted from D30541 and polished.
Difference from D30541 that all logic of SharedSymbol
converting to DefinedRegular was removed for now and
probably will be posted as separate patch.
Differential revision: https://reviews.llvm.org/D30892
llvm-svn: 297814
Using .eh_frame input section pattern in linker script currently
causes a crash; this is because .eh_frame input sections require
special handling since they're all combined into a synthetic
section rather than regular output section.
Differential Revision: https://reviews.llvm.org/D30627
llvm-svn: 297501
With this we have a single section hierarchy. It is a bit less code,
but the main advantage will be in a future patch being able to handle
foo = symbol_in_obj;
in a linker script. Currently that fails since we try to find the
output section of symbol_in_obj. With this we should be able to just
return an InputSection from the expression.
llvm-svn: 297313
In compare with D30458, this makes Bss/BssRelRo to be pure
synthetic sections.
That removes CopyRelSection class completely, making
Bss/BssRelRo to be just regular synthetics.
SharedSymbols involved in creating copy relocations are
converted to DefinedRegular, what also simplifies things.
Differential revision: https://reviews.llvm.org/D30541
llvm-svn: 297008
In many places we reset Size to 0 before calling assignOffsets()
manually. Sometimes we don't do that.
It looks we can just always do that inside.
Previous code had:
template <class ELFT> void OutputSection::assignOffsets() {
uint64_t Off = Size;
And tests feels fine with Off = 0.
I think Off = Size make no sence.
Differential revision: https://reviews.llvm.org/D30463
llvm-svn: 296609
With this we complete the transition out of special output sections,
and with the previous patches it should be possible to merge
OutputSectionBase and OuputSection.
llvm-svn: 296023
With the current design an InputSection is basically anything that
goes directly in a OutputSection. That includes plain input section
but also synthetic sections, so this should probably not be a
template.
llvm-svn: 295993
LLD is a multi-threaded program. errs() or outs() are not guaranteed
to be thread-safe (they are actually not).
LLD's message(), log() or error() are thread-safe. We should use them.
llvm-svn: 295787
This is a small difference I noticed to gold and bfd. When given
--print-gc-sections, we print sections a linkerscript marks
DISCARD. The other linkers don't.
llvm-svn: 295467
This is still not sufficient for lld to handle its own output when a
fde points to a discarded section. I am investigating if it is better
to change the -r output or make lld able to read the current version.
llvm-svn: 295141
with temporarily file name fix in testcase.
Original commit message:
-q, --emit-relocs - Generate relocations in output
Simplest implementation:
* no GC case,
* no "/DISCARD/" linkerscript command support.
This patch is extracted from D28612 / D29636,
Relative to PR31579.
Differential revision: https://reviews.llvm.org/D29663
llvm-svn: 294469
-q, --emit-relocs - Generate relocations in output
Simplest implementation:
* no GC case,
* no "/DISCARD/" linkerscript command support.
This patch is extracted from D28612 / D29636,
Relative to PR31579.
Differential revision: https://reviews.llvm.org/D29663
llvm-svn: 294464
With a synthetic merge section we can have, for example, a single
.rodata section with stings, fixed sized constants and non merge
constants.
I can be simplified further by not setting Entsize, but that is
probably better done is a followup patch.
This should allow some cleanup in the linker script code now that
every output section command maps to just one output section.
llvm-svn: 294005
[ELF] Fixed formatting. NFC
and
[ELF] Bypass section type check
Differential revision: https://reviews.llvm.org/D28761
They do the opposite of what was asked for in the code review.
llvm-svn: 293320
The effect is that the nobits section gets space allocated on disk.
Both bfd and gold allow this with linker scripts. To try to keep
things simple in lld, always allow it for now.
llvm-svn: 291795
After Mark's patch I was wondering what was the rationale for the ELF
spec requiring us to merge only sections with matching flags and
types. I tried emailing
https://groups.google.com/forum/#!forum/generic-abi, but looks like my
emails are not being posted (the list is probably moderated). I
emailed Cary Coutant instead.
Cary pointed out that the section was a late addition and didn't got
the scrutiny it deserved. Given that and the problems found by
implementing the letter of the standard, I propose changing lld to
merge all sections with the same name and issue errors if the types or
some critical flags are different.
This should allow an unmodified firefox linked with lld to run.
This also merges some code with the linkerscript path.
llvm-svn: 291107
That variable was of type DenseMap<StringRef, unsigned>, but the
unsigned numbers needed to be monotonicly increasing numbers because
the implementation that used the variable depended on that fact.
That was an implementation detail and shouldn't have leaked into Config.
This patch simplifies its type to std::vector<StringRef>.
llvm-svn: 290151
I thought for a while about how to remove it, but it looks like we
can just copy the file for now. Of course I'm not happy about that,
but it's just less than 50 lines of code, and we already have
duplicate code in Error.h and some other places. I want to solve
them all at once later.
Differential Revision: https://reviews.llvm.org/D27819
llvm-svn: 290062
Rafael Espindola