This reverts commit r326261 as it introduces inconsistencies in the
handling of load addresses for ObjectFileELF -- some parts of the class
use physical addresses, and some use virtual. This has manifested itself
as us not being able to set the load address of the vdso "module" on
android.
llvm-svn: 326367
Summary:
When writing an object file over gdb-remote, use the vFlashErase, vFlashWrite, and vFlashDone commands if the write address is in a flash memory region. A bare metal target may have this kind of setup.
- Update ObjectFileELF to set load addresses using physical addresses. A typical case may be a data section with a physical address in ROM and a virtual address in RAM, which should be loaded to the ROM address.
- Add support for querying the target's qXfer:memory-map, which contains information about flash memory regions, leveraging MemoryRegionInfo data structures with minor modifications
- Update ProcessGDBRemote to use vFlash commands in DoWriteMemory when the target address is in a flash region
Original discussion at http://lists.llvm.org/pipermail/lldb-dev/2018-January/013093.html
Reviewers: clayborg, labath
Reviewed By: labath
Subscribers: arichardson, emaste, mgorny, lldb-commits
Differential Revision: https://reviews.llvm.org/D42145
Patch by Owen Shaw <llvm@owenpshaw.net>
llvm-svn: 326261
These tests all test very similar things, and use the same inferior.
They were only placed in separate folders to achieve better
paralelization. Now that we paralelize at a file level, this is no
longer relevant, and we can put them together again.
llvm-svn: 326159
Summary:
The command takes two input arguments: a module to use as a debug target
and a file containing a list of commands. The command will execute each
of the breakpoint commands in the file and dump the breakpoint state
after each one.
The commands are expected to be breakpoint set/remove/etc. commands, but
I explicitly allow any lldb command here, so you can do things like
change setting which impact breakpoint resolution, etc. There is also a
"-persistent" flag, which causes lldb-test to *not* automatically clear
the breakpoint list after each command. Right now I don't use it, but
the idea behind it was that it could be used to test more complex
combinations of breakpoint commands (set+modify, set+disable, etc.).
Right now the command prints out only the basic breakpoint state, but
more information can be easily added there. To enable easy matching of
the "at least one breakpoint location found" state, the command
explicitly prints out the string "At least one breakpoint location.".
To enable testing of breakpoints set with an absolute paths, I add the
ability to perform rudimentary substitutions on the commands: right now
the string %p is replaced by the directory which contains the command
file (so, under normal circumstances, this will perform the same
substitution as lit would do for %p).
I use this command to rewrite the TestBreakpointCaseSensitivity test --
the test was checking about a dozen breakpoint commands, but it was
launching a new process for each one, so it took about 90 seconds to
run. The new test takes about 0.3 seconds for me, which is approximately
a 300x speedup.
Reviewers: davide, zturner, jingham
Subscribers: luporl, lldb-commits
Differential Revision: https://reviews.llvm.org/D43686
llvm-svn: 326112
Summary:
Potentially due to the recent testuite refactorings, this test now reports
a full absolute path but expect just the filename. For some reason this
test is skipped on GreenDragon so we've never seen the issue.
Reviewers: vsk
Subscribers: kubamracek, lldb-commits
Differential Revision: https://reviews.llvm.org/D43577
llvm-svn: 325859
The header file for the DLL tried to declare inline functions and a local
function as dllexport which broke the compile and link. Removing the bad
declarations solves the problem, and the test passes on Windows now.
Differential Revision: https://reviews.llvm.org/D43600
llvm-svn: 325836
Summary:
This test was failing on Windows because it expected the breakpoint in the
dynamic library to be resolved before the process is launched. Since the DLL
isn't loaded until the process is launched this didn't work.
The fix creates a special value (-2) for num_expected_locations that ignores
the actual number of breakpoint locations found.
Reviewers: jasonmolenda
Subscribers: sanjoy, lldb-commits
Differential Revision: https://reviews.llvm.org/D43419
llvm-svn: 325704
Summary:
These were not being flaky, but they're still making the tree dirty.
These tests were using lldbutil.append_to_process_working_directory to
derive the file path so I fix them by modifying the function to return
the build directory for local tests.
Technically, now the path returned by this function does not point to
the process working directory for local tests, but I think it makes
sense to keep the function name, as I think we should move towards
launching the process in the build directory (and I intend to change
this for the handful of inferiors that actually care about their PWD,
for example because they need to create files there).
Reviewers: davide, aprantl
Subscribers: lldb-commits
Differential Revision: https://reviews.llvm.org/D43506
llvm-svn: 325690
Summary:
The paralelization patch exposed a bunch of cases where we were still
touching the source tree (as these tests were now stepping on each
others toes and being flaky).
This patch removes such issues from breakpoint command tests. Since the
only reason they were creating files was to indirectly test whether the
breakpoint commands got executed (and plumbing the full build tree path
to all places that needed it would be messy) I decided to modify the
tests to check for a different side effect instead: modification of a
global variable. This also makes the code simpler as checking the value
of the global variable is easier, and there is nothing to clean up.
As the tests aren't really doing anything debug-info related, I took the
opportunity to also mark them as NO_DEBUG_INFO_TESTCASEs.
Reviewers: jingham, aprantl
Subscribers: lldb-commits
Differential Revision: https://reviews.llvm.org/D43464
llvm-svn: 325570
Summary:
This adds a SBDebugger::GetBuildConfiguration static function, which
returns a SBStructuredData describing the the build parameters of
liblldb. Right now, it just contains one entry: whether we were built
with XML support.
I use the new functionality to skip a test which requires XML support,
but concievably the new function could be useful to other liblldb
clients as well (making sure the library supports the feature they are
about to use).
Reviewers: zturner, jingham, clayborg, davide
Subscribers: lldb-commits
Differential Revision: https://reviews.llvm.org/D43333
llvm-svn: 325504
These were missed in the great refactor because they were added
concurrently with it. Since we started running tests in a more parallel
fashion they started to be flaky. This should fix it.
Now that we are no longer polluting the source tree, I also delete the
bit of custom cleanup code specific to these tests.
llvm-svn: 325495
This test uses XML packets, but libxml is an optional dependency of
lldb, and this test fails if it is not present.
I'm leaving this enabled on mac, as thats the only platform that's
likely to have libxml always available, but ideally we should have a way
to skip this based on build configuration. I'll see if I can whip
something like that up soon, but for the time being, this unblocks the
buildbots.
llvm-svn: 324870
arch incompat with spec in file so it's rejected and the test fails.
will look into this later, will be a test case issue not a test issue;
test case may only be valid when lldb is built for/running on an x86_64
system.
llvm-svn: 324795
This only worked on MacOS, which now ships a newer version of
python without this bug. As such, we don't leak the fd, and
this test is not needed anymore (as it also hardcoded the python
version in the check).
llvm-svn: 324743
Summary:
Update makefiles to specify -fPIC in Makefile.rules and only throw -fPIC when building a shared library. This change is necessary to allow building the lldb tests on Windows where -fPIC is not a valid option.
Update a few places to Python 3.x syntax
Reviewers: zturner, lldb-commits
Reviewed By: zturner
Subscribers: stella.stamenova, labath, llvm-commits
Differential Revision: https://reviews.llvm.org/D42994
llvm-svn: 324671
Summary:
The test was trying to reproduce a bug in handling of two concurrent
events, which was impossible to do reliably in a black-box style test.
In practice, this meant the test was only ever failing on remote
targets, as these were slow enough to trigger this.
Fortunately, we now have the ability to mock the server side of the
connection, which means we can simulate the failure deterministically,
so I rewrite the test to use the new gdb-client framework.
I've needed to add a couple of new packets to the mock server to be able
to do this. Instead of trying to guess how a "typical" gdb-client test
will want to handle this, I throw an exception in the implementation to
force the user to override them (the packets are only sent if the test
explicitly performs some action which will trigger them, so a basic test
which e.g. does not need the "continue" functionality will not need to
implement them).
Reviewers: owenpshaw
Subscribers: srhines, lldb-commits
Differential Revision: https://reviews.llvm.org/D42959
llvm-svn: 324590
This patch creates a <test>.dwarf, <test>.dwo, etc., build directory for each testcase variant.
Most importantly, this eliminates the need for the per-test lock file in the source directory.
Tests that are marked as NO_DEBUG_INFO_TESTCASE and build with
buildDefault() are built in a <test>.default build directory.
Differential Revision: https://reviews.llvm.org/D42763
llvm-svn: 324368
We've had a bug (fixed by https://reviews.llvm.org/D42828) where the
thread name was being read incorrectly. Add a test for this behavior.
llvm-svn: 324230
This test was marked as an expected failure because of PR20231 but it
seems to consistently result in an unexpected success across the bots.
Let's try to re-enable this test again.
llvm-svn: 324227
Summary:
This changes the way we store the debug info variant to make it
available earlier in the test bringup: instead of it being set by the
test wrapper method, it is set as a *property* of the wrapper method.
This way, we can inspect it as soon as self.testMethodName is
initialized. The retrieval is implemented by a new function
TestBase.getDebugInfo(), and all that's necessary to make it work is to
change self.debug_info into self.getDebugInfo().
While searching for debug_info occurences i noticed that TestLogging is
being replicated for no good reason, so I removed the replication there.
Reviewers: aprantl, jingham
Subscribers: eraman, JDevlieghere, lldb-commits
Differential Revision: https://reviews.llvm.org/D42836
llvm-svn: 324226
Using the "run_to_{source,name}_breakpoint will allow us to remove
a lot of boiler-plate from the testsuite. We mostly use source
breakpoints, but some tests use by name ones so this was needed.
llvm-svn: 324010
The mock server was sending acks back in response to spurious acks from
the client, but the client was not prepared to handle these. Most of the
time this would work because the only time the client was sending
unsolicited acks is after the initial connection, and there reply-ack
would get ignored in the "flush all packets from the server" loop which
came after the ack. However, this loop had only a 10ms delay, and
sometimes this was not enough to catch the reply (which meant the
connection got out of sync, and test failed).
Since this behavior not consistent with how lldb-server handles this
situation (it just ignores the ack), I fix the mock server to do the
same.
llvm-svn: 323953
This patch is the result of a discussion on lldb-dev, see
http://lists.llvm.org/pipermail/lldb-dev/2018-January/013111.html for
background.
For each test (should be eventually: each test configuration) a
separate build directory is created and we execute
make VPATH=$srcdir/path/to/test -C $builddir/path/to/test -f $srcdir/path/to/test/Makefile -I $srcdir/path/to/test
In order to make this work all LLDB tests need to be updated to find
the executable in the test build directory, since CWD still points at
the test's source directory, which is a requirement for unittest2.
Although we have done extensive testing, I'm expecting that this first
attempt will break a few bots. Please DO NOT HESITATE TO REVERT this
patch in order to get the bots green again. We will likely have to
iterate on this some more.
Differential Revision: https://reviews.llvm.org/D42281
llvm-svn: 323803
Summary:
Adds new utilities that make it easier to write test cases for lldb acting as a client over a gdb-remote connection.
- A GDBRemoteTestBase class that starts a mock GDB server and provides an easy way to check client packets
- A MockGDBServer that, via MockGDBServerResponder, can be made to issue server responses that test client behavior.
- Utility functions for handling common data encoding/decoding
- Utility functions for creating dummy targets from YAML files
----
Split from the review at https://reviews.llvm.org/D42145, which was a new feature that necessitated the new testing capabilities.
Reviewers: clayborg, labath
Reviewed By: clayborg, labath
Subscribers: hintonda, davide, jingham, krytarowski, mgorny, lldb-commits
Differential Revision: https://reviews.llvm.org/D42195
Patch by Owen Shaw <llvm@owenpshaw.net>
llvm-svn: 323636
TestLibcxxListLoop - fails because the evil "define private public"
trick does not work with gmodules. The purpose of the test is not to
test debug info parsing so I just mark it as no_debug_info_testcase.
In the long term it may be interesting to write a mock std::list which
will allow us to test bad inputs to data formatters more easily.
TestGModules - seems to be a genuine bug. Filed pr36107 and xfailed.
llvm-svn: 323520
This test #include's stdio.h, which, on at least two bots results in a
module import of MacTypes.h (due to weird SDK layering issues), which
causes the test to fail to compile.
Just don't #include stdio.h, as it's not needed for the test.
llvm-svn: 323467
Stale global module caches cause problems for the bots. The modules
become invalid when clang headers are updated by version control, and
tests which use these modules fail to compile, e.g:
fatal error: file '.../__stddef_max_align_t.h' has been modified since the module file '/var/.../Darwin.pcm' was built
note: please rebuild precompiled header '/var/.../Darwin.pcm'
Eventually we should transition to having just a single module cache to speed
tests up. This patch should be just enough to fix the spurious bot failures due
to stale caches.
rdar://36479805, also related to llvm.org/PR36048
Differential Revision: https://reviews.llvm.org/D42277
llvm-svn: 323450
RemoveInvalidLocations was clearing out the m_locations in the
breakpoint by hand, and it wasn't also clearing the locations from
the address->location map, which confused us when we went to update
breakpoint locations.
I also made Breakpoint::ModulesChanged check the Location's Section
to make sure it hadn't been deleted. This shouldn't strictly be necessary,
but if the DynamicLoaderPlugin doesn't do it's job right (I'm looking at
you new Darwin DynamicLoader...) then it can end up leaving stale locations
on rerun. It doesn't hurt to clean them up here as a backstop.
<rdar://problem/36134350>
llvm-svn: 322348
When rendezvous structure is not initialized we need to set up
rendezvous breakpoint anyway. In this case the code will locate
dynamic loader (interpreter) and look for known function names.
This is r322209, but with fixed VDSO loading fixed.
Bug: https://bugs.llvm.org/show_bug.cgi?id=25806
Differential Revision: https://reviews.llvm.org/D41533
llvm-svn: 322251
When rendezvous structure is not initialized we need to set up
rendezvous breakpoint anyway. In this case the code will locate
dynamic loader (interpreter) and look for known function names.
Bug: https://bugs.llvm.org/show_bug.cgi?id=25806
Differential Revision: https://reviews.llvm.org/D41533
llvm-svn: 322209
an empty Python string object when it reads a 0-length
string out of memory (and a successful SBError object).
<rdar://problem/26186692>
llvm-svn: 321338
Also add a test. There should also be control for this
in ProcessLaunchInfo and a "target launch" flag, but at least
this will allow you to control it somehow.
<rdar://problem/35842137>
llvm-svn: 319731
Summary:
This flag is on by default for darwin and freebsd, but off for linux.
Without it, clang will sometimes not emit debug info for types like
std::string. Whether it does this, and which tests will fail because of
that depends on the linux distro and c++ library version.
A bunch of tests were already setting these flags manually, but here
instead I take a whole sale approach and enable this flag for all tests.
Any test which does not want to have this flag (right now we have one
such test) can turn it off explicitly via
CFLAGS_EXTRAS+=$(LIMIT_DEBUG_INFO_FLAGS)
This fixes a bunch of data formatter tests on red-hat.
Reviewers: davide, jankratochvil
Subscribers: emaste, aprantl, krytarowski, JDevlieghere, lldb-commits
Differential Revision: https://reviews.llvm.org/D40717
llvm-svn: 319653
unambiguously on one bit of code. On macOS these
lines mapped to two distinct locations, and that
was artificially throwing off the test.
llvm-svn: 319472
Summary:
New linux kernels (on systems that support the XSAVES instruction) will
not update the inferior registers unless the corresponding flag in the
XSAVE header is set. Normally this flag will be set in our image of the
XSAVE area (since we obtained it from the kernel), but if the inferior
has never used the corresponding register set, the respective flag can
be clear.
This fixes the issue by making sure we explicitly set the flags
corresponding to the registers we modify. I don't try to precisely match
the flags to set on each write, as the rules could get quite complicated
-- I use a simpler over-approximation instead.
This was already caught by test_fp_register_write, but that was only
because the code that ran before main() did not use some of the register
sets. Since nothing in this test relies on being stopped in main(), I
modify the test to stop at the entry point instead, so we can be sure
the inferior did not have a chance to access these registers.
Reviewers: clayborg, valentinagiusti
Subscribers: lldb-commits
Differential Revision: https://reviews.llvm.org/D40434
llvm-svn: 319161
r317561 exposed an interesting bug (pr35228) in handling of simultaneous
watchpoint hits. Disabling the test until we can get that fixed.
llvm-svn: 317683
Summary:
The test incremented an atomic varible to trigger the watchpoint event.
On arm64 this compiled to a ldaxr/stlxr loop, with the watchpoint being
triggered in the middle of the loop. Hitting the watchpoint resets the
exclusive monitor, and forces the process to loop one more time, hitting
the watchpoint again, etc.
While it would be nice if the debugger was able to resume from this
situation, this is not trivial, and is not what this test is about.
Therefore, I propose to change this to a simple store to a normal
variable (which should still trip the watchpoint everywhere, but without
atomic loops) and file a bug to investigate the possibilities of
handling the watchpoints in atomic loops in a more reasonable way.
Reviewers: clayborg
Subscribers: aemerson, kristof.beyls, lldb-commits
Differential Revision: https://reviews.llvm.org/D39680
llvm-svn: 317561
Summary:
This mechanism was mostly redundant with the file-based .categories
mechanism, and it was interfering with it, as any test which implemented
a getCategories method would not inherit the filesystem categories.
This patch removes it. The existing categories are preserved either by
adding a .categories file, or using the @add_test_categories decorator.
Reviewers: jingham, clayborg, zturner
Subscribers: lldb-commits
Differential Revision: https://reviews.llvm.org/D39515
llvm-svn: 317277
Now that the wathpoint tests have their own category, we can easily skip
them on devices which don't have watchpoint support. Therefore, we don't
need an android xfail on each of these tests.
llvm-svn: 317276
Summary:
std::queue is just a fancy wrapper around another container, so all we
need to do is to delegate to the it.
Reviewers: jingham, EricWF
Subscribers: srhines, mgorny, lldb-commits, eugene
Differential Revision: https://reviews.llvm.org/D35666
llvm-svn: 317099
Most of the watchpoint tests are organized into subtrees, so we can use the
file-based .categories approach to annotate them. The exception are the
concurrent_events tests, which needed to be annotated on a per-test basis.
The motivation behind this is to provide an easy way to disable watchpoint
tests on systems where the watchpoint functionality is not present/unreliable.
llvm-svn: 317004
Summary:
This adds a data formatter for the implementation of forward_list in
libc++. I've refactored the existing std::list data formatter a bit to
enable more sharing of code (mainly the loop detection stuff).
Reviewers: jingham, EricWF
Subscribers: srhines, eugene, lldb-commits
Differential Revision: https://reviews.llvm.org/D35556
llvm-svn: 316992
The test was asserting that we can only find one frame in the minidump.
Now that we have the default unwind plan from the ABI plugin, we are
able to find 5 more frames using the frame pointer chaining. Correct the
expectation in the test.
llvm-svn: 316688
The core of this change is the new CommandInterpreter::m_command_state,
which models the state transitions for interactive commands, including
an "interrupted" state transition.
In general, command interruption requires cooperation from the code
executing the command, which needs to poll for interruption requests
through CommandInterpreter::WasInterrupted().
CommandInterpreter::PrintCommandOutput() implements an optionally
interruptible printing of the command output, which for large outputs
was likely the longest blocking part.
(ex. target modules dump symtab on a complex binary could take 10+ minutes)
Differential Revision: https://reviews.llvm.org/D37923
llvm-svn: 315037
running watchos. These tests cannot run on normal customer devices,
but I hope to some day have a public facing bot running against a
device.
llvm-svn: 314355
in TestDataFormatterSkipSummary.py - I'm building this test
with the default c++ library.
Skip TestMTCSimple.py when running for i386.
llvm-svn: 314155
Normal customer devices won't be able to run these tests, we're hoping to get
a public facing bot set up at some point. Both devices pass the testsuite without
any errors or failures.
I have seen some instability with the armv7 test runs, I may submit additional patches
to address this. arm64 looks good.
I'll be watching the bots for the rest of today; if any problems are introduced by
this patch I'll revert it - if anyone sees a problem with their bot that I don't
see, please do the same. I know it's a rather large patch.
One change I had to make specifically for iOS devices was that debugserver can't
create files. There were several tests that launch the inferior process redirecting
its output to a file, then they retrieve the file. They were not trying to test
file redirection in these tests, so I rewrote those to write their output to a file
directly.
llvm-svn: 314132
Normal customer devices won't be able to run these devices, we're hoping to get
a public facing bot set up at some point. Both devices pass the testsuite without
any errors or failures.
I have seen some instability with the armv7 test runs, I may submit additional patches
to address this. arm64 looks good.
I'll be watching the bots for the rest of today; if any problems are introduced by
this patch I'll revert it - if anyone sees a problem with their bot that I don't
see, please do the same. I know it's a rather large patch.
One change I had to make specifically for iOS devices was that debugserver can't
create files. There were several tests that launch the inferior process redirecting
its output to a file, then they retrieve the file. They were not trying to test
file redirection in these tests, so I rewrote those to write their output to a file
directly.
llvm-svn: 314038
Normal customer devices won't be able to run these devices, we're hoping to get
a public facing bot set up at some point.
There will be some smaller follow-on patches. The changes to tools/lldb-server are
verbose and I'm not thrilled with having to skip all of these tests manually.
There are a few places where I'm making the assumption that "armv7", "armv7k", "arm64"
means it's an ios device, and I need to review & clean these up with an OS check
as well. (Android will show up as "arm" and "aarch64" so by pure luck they shouldn't
cause problems, but it's not an assumption I want to rely on).
I'll be watching the bots for the rest of today; if any problems are introduced by
this patch I'll revert it - if anyone sees a problem with their bot that I don't
see, please do the same. I know it's a rather large patch.
One change I had to make specifically for iOS devices was that debugserver can't
create files. There were several tests that launch the inferior process redirecting
its output to a file, then they retrieve the file. They were not trying to test
file redirection in these tests, so I rewrote those to write their output to a file
directly.
llvm-svn: 313932
The main change is to avoid setting the process state as running when
debugging core/minidumps (details in the bug). Also included a few small,
related fixes around how the errors propagate in this case.
Fixed the FreeBSD/Windows break: the intention was to keep
Process::WillResume() and Process::DoResume() "in-sync", but this had the
unfortunate consequence of breaking Process sub-classes which don't override
WillResume().
The safer approach is to keep Process::WillResume() untouched and only
override it in the minidump and core implementations.
patch by lemo
Bug: https://bugs.llvm.org/show_bug.cgi?id=34532
Differential Revision: https://reviews.llvm.org/D37651
llvm-svn: 313655
When introduced, breakpoint names were just tags that you could
apply to breakpoints that would allow you to refer to a breakpoint
when you couldn't capture the ID, or to refer to a collection of
breakpoints.
This change makes the names independent holders of breakpoint options
that you can then apply to breakpoints when you add the name to the
breakpoint. It adds the "breakpoint name configure" command to set
up or reconfigure breakpoint names. There is also full support for
then in the SB API, including a new SBBreakpointName class.
The connection between the name and the breakpoints
sharing the name remains live, so if you reconfigure the name, all the
breakpoint options all change as well. This allows a quick way
to share complex breakpoint behavior among a bunch of breakpoints, and
a convenient way to iterate on the set.
You can also create a name from a breakpoint, allowing a quick way
to copy options from one breakpoint to another.
I also added the ability to make hidden and delete/disable protected
names. When applied to a breakpoint, you will only be able to list,
delete or disable that breakpoint if you refer to it explicitly by ID.
This feature will allow GUI's that need to use breakpoints for their
own purposes to keep their breakpoints from getting accidentally
disabled or deleted.
<rdar://problem/22094452>
llvm-svn: 313292
The auto-continue test was using the new (better) name
for providing commands (-C) but I haven't checked in that change
yet. Put the test back to the old way for now.
llvm-svn: 313221
The main change is to avoid setting the process state as running when
debugging core/minidumps (details in the bug).
Also included a few small, related fixes around how the errors propagate in
this case.
patch by lemo
Bug: https://bugs.llvm.org/show_bug.cgi?id=34532
Differential Revision: https://reviews.llvm.org/D37651
llvm-svn: 313210
On Windows a process can't delete its own current direcotry, that's why the test
needs to return to the original direcotry before removing newdir.
llvm-svn: 313113
The FXSAVE member `ftw` (FPU Tag Word) was given the wrong size (8-bit)
instead of the correct width (16-bit) as per the x87 Programmer's
Manual. Adjust this to ensure that we print out the complete value for
the register.
llvm-svn: 311579
This is the FreeBSD equivalent of r238549.
This serves 2 purposes:
* LLDB should handle inferior process signals SIGSEGV/SIGILL/SIGBUS/
SIGFPE the way it is suppose to be handled. Prior to this fix these
signals will neither create a coredump, nor exit from the debugger
or work for signal handling scenario.
* eInvalidCrashReason need not report "unknown crash reason" if we have
a valid si_signo
llvm.org/pr23699
Patch by Karnajit Wangkhem
Differential Revision: https://reviews.llvm.org/D35223
llvm-svn: 310591
Summary:
The available platform list was previously only accessible via the
`platform list` command, this patch makes it possible to access that
list via the SBDebugger API. The active platform list has likewise
been exposed via the SBDebugger API.
Differential Revision: https://reviews.llvm.org/D35760
llvm-svn: 310452
You can get a breakpoint to auto-continue by adding "continue"
as a command, but that has the disadvantage that if you hit two
breakpoints simultaneously, the continue will force the process
to continue, and maybe even forstalling the commands on the other.
The auto-continue flag means the breakpoints can negotiate about
whether to stop.
Writing tests, I wanted to supply some commands when I made the
breakpoints, so I also added that ability.
llvm-svn: 309969
When an option was set at on a location, I was just copying the whole option set
to the location, and letting it shadow the breakpoint options. That was wrong since
it meant changes to unrelated options on the breakpoint would no longer take on this
location. I added a mask of set options and use that for option propagation.
I also added a "location" property to breakpoints, and added SBBreakpointLocation.{G,S}etCommandLineCommands
since I wanted to use them to write some more test cases.
<rdar://problem/24397798>
llvm-svn: 309772
Summary:
SBBreakpointLocation exposed the ignore count, but didn't expose
the hit count. Both values were exposed by SBBreakpoint and
SBWatchpoint, so this makes things a bit more consistent.
Reviewers: lldb-commits
Subscribers: lldb-commits
Differential Revision: https://reviews.llvm.org/D31283
llvm-svn: 308480
In NativeProcessLinux::MonitorSIGTRAP we were asserting that the si_code
value is one of the codes we know about. However, that list was very
incomplete -- for example, we were not handling SI_TKILL/SI_USER,
generated by raise(SIGTRAP). A cursory examination show there are at
least a dozen codes like these that an app can generate, and more can be
added at any point.
So, instead of trying to play catchup, I change the default behavior to
treat an unknown si_code like an ordinary signal. The only reason we
needed to inspect si_code in the first place is because
watchpoint/breakpoints are notified as SIGTRAP, but we already know
about those, and us starting to use a new debug event is far less likely
than somebody introducing a new non-debug event.
I add a test case to TestRaise to verify we are handling raise(SIGTRAP)
in an application properly.
llvm-svn: 307644
Starting with android ndk r15, clang much more tests are affected by the
-mstackrealign bugl (now nearly all functions are affected, and not just
the ones requiring 16-byte alignment). Due to their numbers, Xfailing
all of them is not a viable option, so we will just have to declare this
configuration unsupported, and wait until ndk ships a clang version that
has this bug fixed.
llvm-svn: 307252
This adds a simple testcase for MainThreadCheckerRuntime. The tool (Main Thread Checker) is only available on Darwin, so the test also detects the presence of libMainThreadChecker.dylib and is skipped if the tool is not available.
llvm-svn: 307170
All android builds systems have switched to -mstackrealign for building
x86 binaries, so follow their cue with our mini build system.
This presently breaks just one test (TestReturnValue), and this is due
to a compiler bug, which has already been fixed in clang, but it hasn't
made it yet into the official NDK compiler. While I'm touching that
test, I also remove an android-specific XFAIL, which is not relevant
anymore.
llvm-svn: 306683
This patch introduces a new thread backtrace command "unique".
The command is based off of "thread backtrace all" but will instead
find all threads which share matching call stacks and de-duplicate
their output, listing call stack and all the threads which share it.
This is especially useful for apps which use thread/task pools
sitting around waiting for work and cause excessive duplicate output.
I needed this behavior recently when debugging a core with 700+ threads.
Differential Revision: https://reviews.llvm.org/D33426
Reviewers: clayborg, jingham
Patch by Brian Gianforcaro <b.gianfo@gmail.com>
llvm-svn: 305197
I was over-eager to unable this test in r304976. It still fails in this
combination, at there does not seem to be anything we can do about it,
as the generated code does not preserve the link register.
llvm-svn: 305062
Summary:
When a call instruction is the last instruction in a function, the
backtrace PC will point past the end of the function. We already had
special code to handle that, but we did not handle the case where the PC
ends up outside of the bounds of the module containing the function,
which is a situation that occured in TestNoreturnUnwind on android for
some arch/compiler combinations.
I fix this by adding an argument to Address resolution code which states
that we are ok with addresses pointing to the end of a module/section to
resolve to that module/section.
I create a reproducible test case for this situation by hand-crafting an
executable which has a noreturn function at the end of a module.
Reviewers: jasonmolenda, jingham
Subscribers: lldb-commits
Differential Revision: https://reviews.llvm.org/D32022
llvm-svn: 304976
as described in pr33042, we cannot reliably retrieve the return value on
arm64 in cases it is returned via x8 pointer. I tried to do this as
surgically as possible and disabled it only on targets I know to be
affected, as the code is still useful, even though it can only work on
best-effort basis.
llvm-svn: 303076
Summary:
Arm64 Procedure Call Standard specifies than only vectors up to 16 bytes
are stored in v0 (which makes sense, as that's the size of the
register). 32-byte vector types are passed as regular structs via x8
pointer. Treat them as such.
This fixes TestReturnValue for arm64-clang. I also split the test case
into two so I can avoid the if(gcc) line, and annotate each test
instead. (It seems the vector type tests fail with gcc only when
targetting x86 arches).
Reviewers: tberghammer, eugene
Subscribers: aemerson, omjavaid, rengolin, srhines, lldb-commits
Differential Revision: https://reviews.llvm.org/D32813
llvm-svn: 302220
Summary:
The existing cpp-level checks using PR_MPX_ENABLE_MANAGEMENT aren't sufficient,
as this isn't defined for linux kernel versions below 3.19.
Reviewers: valentinagiusti, zturner, labath
Subscribers: lldb-commits
Differential Revision: https://reviews.llvm.org/D32719
llvm-svn: 302027
Summary:
MergeFrom was updating the architecture if the target triple did not
have it set. However, it was leaving the core field as invalid. This
resulted in assertion failures in core file tests as a missing core
meant we were unable to compute the address byte size properly.
Add a unit test for the new behaviour.
Reviewers: jingham, clayborg
Subscribers: lldb-commits
Differential Revision: https://reviews.llvm.org/D32221
llvm-svn: 300836
I thought my previous commit got the last ones but somehow I missed
these. This also resurrects TestDataFormatterLibcxxSet, which got
commented out in r263859 as a part of some seemingly unrelated change.
llvm-svn: 300833
r285226 dropped the code that did these checks. I am pretty
sure that was inadvertent, so I added that back in and added
a test for it.
<rdar://problem/31661252>
llvm-svn: 300564
Summary:
The iteration list through the available data formatters was undefined,
which meant that the vector<bool> formatter kicked in only in cases
where it happened to be queried before the general vector formatter. To
fix this, I merge the two data formatter entries into one, and select
which implementation to use in the factory function.
Reviewers: jasonmolenda, tberghammer, EricWF
Subscribers: lldb-commits
Differential Revision: https://reviews.llvm.org/D31880
llvm-svn: 300047
gcc emits DW_LANG_C89 even if we specify -std=c99 during compilation.
Since this isn't an lldb bug, but just the way the compiler happens to
be implemented, I teach the test to expect this situation correctly.
llvm-svn: 300046
I have put them all in their own category, and made that category disabled by default.
Differential revision: https://reviews.llvm.org/D31718
llvm-svn: 299587
look showed that the target's arch has no core / byte order and so when
AuxVector::AuxVector calls into a dataextractor and sets the byte size to 0,
it asserts. e.g.
m_arch = {
m_triple = (Data = "x86_64--linux", Arch = x86_64, SubArch = NoSubArch, Vendor = UnknownVendor, OS = Linux, Environment = UnknownEnvironment, ObjectFormat = ELF)
m_core = kCore_invalid
m_byte_order = eByteOrderInvalid
m_flags = 0x00000000
m_distribution_id = <no value available>
}
<rdar://problem/31380097>
llvm-svn: 299408
Summary:
After this change a sythetic child provider can generate a special child
named "$$dereference$$" what if present is used when "operator*" or
"operator->" used on a ValueObject. The goal of the change is to make
expressions like "up->foo" work inside the "frame variable" command.
Reviewers: labath, jingham
Subscribers: lldb-commits
Differential Revision: https://reviews.llvm.org/D31368
llvm-svn: 299251
Summary:
Displaying the object pointed by the unique_ptr can cause an infinite
recursion when we have a pointer loop so this change stops that
behavior. Additionally it makes the unique_ptr act more like a class
containing a pointer (what is the underlying truth) instead of some
"magic" class.
Reviewers: labath, jingham
Differential Revision: https://reviews.llvm.org/D31366
llvm-svn: 299249
Summary:
This aims to replace the different decorators we've had on each libc++
test with a single solution. Each libc++ will be assigned to the
"libc++" category and a single central piece of code will decide whether
we are actually able to run libc++ test in the given configuration by
enabling or disabling the category (while giving the user the
opportunity to override this).
I started this effort because I wanted to get libc++ tests running on
android, and none of the existing decorators worked for this use case:
- skipIfGcc - incorrect, we can build libc++ executables on android
with gcc (in fact, after this, we can now do it on linux as well)
- lldbutil.skip_if_library_missing - this checks whether libc++.so is
loaded in the proces, which fails in case of a statically linked
libc++ (this makes copying executables to the remote target easier to
manage).
To make this work I needed to split out the pseudo_barrier code from the
force-included file, as libc++'s atomic does not play well with gcc on
linux, and this made every test fail, even though we need the code only
in the threading tests.
So far, I am only annotating one of the tests with this category. If
this does not break anything, I'll proceed to update the rest.
Reviewers: jingham, zturner, EricWF
Subscribers: srhines, lldb-commits
Differential Revision: https://reviews.llvm.org/D30984
llvm-svn: 299028
This was added to workaround a limitation in LLVM's implementation
of getting the current user's home directory, since it would
only look at the value of $HOME, but we did not want to rely
on that being set so we would also look in the password database.
Adding the ability to look in the password database to LLVM was
a straightforward patch that was submitted in r298513, so since
that is done this test is no longer needed.
llvm-svn: 298519
Only do this when we are debugging an executable, since we
don't have a good way to trace from an ObjectFile back to its
containing executable. Detecting pre-run libs before running
is "best effort" in lldb, but this one is pretty easy.
llvm-svn: 298290
It seems that on darwin we are not able to resolve breakpoints in the
test shared library until the process has started. That seems
unfortunate, but it is not the purpose of this test, so work around that
by starting the process before doing the rest of our checks.
llvm-svn: 297830
Summary:
This fixes the case where a user tries to set a breakpoint on a source
line outside of any function (e.g. because that code is #ifdefed out, or
the compiler did not emit code for the function, etc.) and we would
silently move the breakpoint to the next function.
Now we check whether the line range of the resolved symbol context
function matches the original line number. We reject any breakpoint
locations that appear to move the breakpoint into a new function. This
filtering only happens if we have full debug info available (e.g. in
case of -gline-tables-only compilation, we still set the breakpoint on
the nearest source line).
Reviewers: jingham
Subscribers: lldb-commits
Differential Revision: https://reviews.llvm.org/D30817
llvm-svn: 297817
Summary:
There is nothing we can do with the breakpoint once the associated
target becomes deleted. This will make sure we don't hold on to more
resources than we need in this case. In particular, this fixes the case
TestStepOverBreakpoint on windows, where a lingering SBBreakpoint object
causes us to nor unmap the executable file from memory.
Reviewers: clayborg, jingham
Subscribers: lldb-commits
Differential Revision: https://reviews.llvm.org/D30249
llvm-svn: 296328
Summary:
This also removes magic rename code, which caused the channel to be
called "linux" when built on a linux machine, and "freebsd" when built
on a freebsd one, which seems unnecessary - registering a new channel is
sufficiently simple now that if we wish to log something extremely
os-specific, we can just create a new channel. None of the current
categories seem very specific to one OS or another.
Reviewers: emaste, krytarowski
Subscribers: lldb-commits
Differential Revision: https://reviews.llvm.org/D30250
llvm-svn: 295954
Pavel Labath