These three classes have no external dependencies, but they are used
from various low-level APIs. Moving them down to Utility improves
overall code layering (although it still does not break any particular
dependency completely).
The XCode project will need to be updated after this change.
Differential Revision: https://reviews.llvm.org/D49740
llvm-svn: 339127
This is intended as a clean up after the big clang-format commit
(r280751), which unfortunately resulted in many of the comment
paragraphs in LLDB being very hard to read.
FYI, the script I used was:
import textwrap
import commands
import os
import sys
import re
tmp = "%s.tmp"%sys.argv[1]
out = open(tmp, "w+")
with open(sys.argv[1], "r") as f:
header = ""
text = ""
comment = re.compile(r'^( *//) ([^ ].*)$')
special = re.compile(r'^((([A-Z]+[: ])|([0-9]+ )).*)|(.*;)$')
for line in f:
match = comment.match(line)
if match and not special.match(match.group(2)):
# skip intentionally short comments.
if not text and len(match.group(2)) < 40:
out.write(line)
continue
if text:
text += " " + match.group(2)
else:
header = match.group(1)
text = match.group(2)
continue
if text:
filled = textwrap.wrap(text, width=(78-len(header)),
break_long_words=False)
for l in filled:
out.write(header+" "+l+'\n')
text = ""
out.write(line)
os.rename(tmp, sys.argv[1])
Differential Revision: https://reviews.llvm.org/D46144
llvm-svn: 331197
Summary:
The PC corresponding to the breakpoint was being calculated wrongly,
which was causing LLDB to never go past the first breakpoint, when
there was a second one adjacent to it.
Reviewers: clayborg, labath
Reviewed By: clayborg, labath
Subscribers: anajuliapc, alexandreyy, lbianc
Differential Revision: https://reviews.llvm.org/D43344
Patch by Leandro Lupori <leandro.lupori@gmail.com>.
llvm-svn: 325728
Summary:
The ObjectFile class was used to determine the architecture of a running
process by inspecting it's main executable. There were two issues with
this:
- it's in the wrong layer
- the call can be very expensive (it can end up computing the crc of the
whole file).
Since the process is running on the host, ideally we would be able to
just query the data straight from the OS like darwin does, but there
doesn't seem to be a reasonable way to do that. So, this fixes the
layering issue by using the llvm object library to inspect the file.
Since we know the process is already running on the host, we just need
to peek at a few bytes of the elf header to determine whether it's 32-
or 64-bit (which should make this faster as well).
Pretty much the same logic was implemented in
NativeProcessProtocol::ResolveProcessArchitecture, so I delete this
logic and replace calls with GetProcessInfo.
Reviewers: eugene, krytarowski
Subscribers: mgorny, hintonda, lldb-commits
Differential Revision: https://reviews.llvm.org/D42488
llvm-svn: 323637
Summary:
lldb-server was sending the "exit" packet (W??) twice. This happened
because it was handling both the pre-exit (PTRACE_EVENT_EXIT) and
post-exit (WIFEXITED) as exit events. We had some code which was trying
to detect when we've already sent the exit packet, but this stopped
working quite a while ago.
This never really caused any problems in practice because the client
automatically closes the connection after receiving the first packet, so
the only effect of this was some warning messages about extra packets
from the lldb-server test suite, which were ignored because they didn't
fail the test.
The new test suite will be stricter about this, so I fix this issue
ignoring the first event. I think this is the correct behavior, as the
inferior is not really dead at that point, so it's premature to send the
exit packet.
There isn't an actual test yet which would verify the exit behavior, but
in my next patch I will add a test which will also test this
functionality.
Reviewers: eugene
Subscribers: lldb-commits
Differential Revision: https://reviews.llvm.org/D41069
llvm-svn: 320961
struct iovec is used as an interface to system (posix) api's. As such,
we shouldn't be using it in os-independent code, and we shouldn't be
defining our own iovec replacements.
Fortunately, its usage was not very widespread, so the removal was very
easy -- I simply moved a couple declarations into os-specific code.
llvm-svn: 319536
Summary:
This commit removes the concrete_frame_idx member from
NativeRegisterContext and related functions, which was always set to
zero and never used.
I also change the native thread class to store a NativeRegisterContext
as a unique_ptr (documenting the ownership) and make sure it is always
initialized (most of the code was already blindly dereferencing the
register context pointer, assuming it would always be present -- this
makes its treatment consistent).
Reviewers: eugene, clayborg, krytarowski
Subscribers: aemerson, sdardis, nemanjai, javed.absar, arichardson, kristof.beyls, kbarton, uweigand, alexandreyy, lldb-commits
Differential Revision: https://reviews.llvm.org/D39837
llvm-svn: 317881
Summary:
These functions used to return bool to signify whether they were able to
retrieve the data. This is redundant because the ArchSpec and ByteOrder
already have their own "invalid" states, *and* because both of the
current implementations (linux, netbsd) can always provide a valid
result.
This allows us to simplify bits of the code handling these values.
Reviewers: eugene, krytarowski
Subscribers: javed.absar, lldb-commits
Differential Revision: https://reviews.llvm.org/D39733
llvm-svn: 317779
Summary:
The NativeThread class is useless without the containing process (and in
some places it is already assuming the process is always around). This
makes it clear that the NativeProcessProtocol is the object owning the
threads, and makes the destruction order deterministic (first threads,
then process). The NativeProcess is the only thing holding a thread
unique_ptr, and methods that used to hand out thread shared pointers now
return raw pointers or references.
Reviewers: krytarowski, eugene
Subscribers: lldb-commits
Differential Revision: https://reviews.llvm.org/D35618
llvm-svn: 316007
Add support for ppc64le to create breakpoints and read/write
general purpose registers.
Other features for ppc64le and functions to read/write
other registers are being implemented.
Patch by Alexandre Yukio Yamashita (alexandreyy)
Differential Revision: https://reviews.llvm.org/D38323
llvm-svn: 315008
Summary:
The usage of shared_from_this forces us to separate construction and
initialization phases, because shared_from_this() is not available in
the constructor (or destructor). The shared semantics are not necessary,
as we always have a clear owner of the native process class
(GDBRemoteCommunicationServerLLDB object). Even if we need shared
semantics in the future (which I think we should strongly avoid),
reverting this will not be necessary -- the owners can still easily
store the native process object in a shared pointer if they really want
to -- this just prevents the knowledge of that from leaking into the
class implementation.
After this a NativeThread object will hold a reference to the parent
process (instead of a weak_ptr) -- having a process instance always
available allows us to simplify some logic in this class (some of it was
already simplified because we were asserting that the process is
available, but this makes it obvious).
Reviewers: krytarowski, eugene, zturner
Subscribers: lldb-commits
Differential Revision: https://reviews.llvm.org/D35123
llvm-svn: 308282
In NativeProcessLinux::MonitorSIGTRAP we were asserting that the si_code
value is one of the codes we know about. However, that list was very
incomplete -- for example, we were not handling SI_TKILL/SI_USER,
generated by raise(SIGTRAP). A cursory examination show there are at
least a dozen codes like these that an app can generate, and more can be
added at any point.
So, instead of trying to play catchup, I change the default behavior to
treat an unknown si_code like an ordinary signal. The only reason we
needed to inspect si_code in the first place is because
watchpoint/breakpoints are notified as SIGTRAP, but we already know
about those, and us starting to use a new debug event is far less likely
than somebody introducing a new non-debug event.
I add a test case to TestRaise to verify we are handling raise(SIGTRAP)
in an application properly.
llvm-svn: 307644
Summary:
This replaces the static functions used for creating
NativeProcessProtocol instances with a factory pattern, and modernizes
the interface of the new class in the process -- I use llvm::Expected
instead of the Status+value combo. I also move some of the common code
(like the Delegate registration into the base class). The new
arrangement has multiple benefits:
- it removes the NativeProcess*** dependency from Process/gdb-remote
(which for example means that liblldb no longer pulls in this code).
- it enables unit testing of the GDBRemoteCommunicationServerLLGS class
(by providing a mock Native Process).
- serves as another example on how to use the llvm::Expected class (I
couldn't get rid of the Initialize-type functions completely here
because of the use of shared_from_this, but that's the next thing on
my list here)
Tests still pass on Linux and I've made sure NetBSD compiles after this.
Reviewers: zturner, eugene, krytarowski
Subscribers: srhines, lldb-commits, mgorny
Differential Revision: https://reviews.llvm.org/D33778
llvm-svn: 307390
Summary:
This patch implements support for Intel(R) Processor Trace
in lldb server. The changes have support for
starting/stopping and reading the trace data. The code
is only available on Linux versions where the perf
attributes for aux buffers are available.
The patch also consists of Unit tests for testing the
core buffer reading function.
Reviewers: lldb-commits, labath, clayborg, zturner, tberghammer
Reviewed By: labath, clayborg
Subscribers: mgorny
Differential Revision: https://reviews.llvm.org/D33674
llvm-svn: 306516
Summary:
A number of places were trying to decode the result of wait(). Add a simple
utility function that does that and a struct that encapsulates the
decoded result. Then also provide a pretty-printer for that class.
Reviewers: zturner, krytarowski, eugene
Subscribers: lldb-commits, mgorny
Differential Revision: https://reviews.llvm.org/D33998
llvm-svn: 305689
strerror is not thread-safe. llvm's StrError tries hard to retrieve the
string in a thread-safe way and falls back to strerror only if it does
not have another way.
llvm-svn: 304795
This renames the LLDB error class to Status, as discussed
on the lldb-dev mailing list.
A change of this magnitude cannot easily be done without
find and replace, but that has potential to catch unwanted
occurrences of common strings such as "Error". Every effort
was made to find all the obvious things such as the word "Error"
appearing in a string, etc, but it's possible there are still
some lingering occurences left around. Hopefully nothing too
serious.
llvm-svn: 302872
This was originall reverted due to some test failures in
ModuleCache and TestCompDirSymlink. These issues have all
been resolved and the code now passes all tests.
Differential Revision: https://reviews.llvm.org/D30698
llvm-svn: 297300
this reverts r297116 because it breaks the unittests and
TestCompDirSymlink. The ModuleCache unit test is trivially fixable, but
the CompDirSymlink failure is a symptom of a deeper problem: llvm's stat
functionality is not a drop-in replacement for lldb's. The former is
based on stat(2) (which does symlink resolution), while the latter is
based on lstat(2) (which does not).
This also reverts subsequent build fixes (r297128, r297120, 297117) and
r297119 (Remove FileSpec dependency on FileSystem) which builds on top
of this.
llvm-svn: 297139
This deletes LLDB's FileType enumeration and replaces all
users, and all calls to functions that check whether a file
exists etc with corresponding calls to LLVM.
Differential Revision: https://reviews.llvm.org/D30624
llvm-svn: 297116
Summary: QPassSignals package allows lldb client to tell lldb-server to ignore certain types of signals and re-inject them back to inferior without stopping execution.
Reviewers: jmajors, labath
Subscribers: danalbert, srhines, emaste, lldb-commits
Tags: #lldb
Differential Revision: https://reviews.llvm.org/D30286
Author: Eugene Zemtsov <ezemtsov@google.com>
llvm-svn: 296101
Summary:
The std::call_once implementation in libstdc++ has problems on few systems: NetBSD, OpenBSD and Linux PPC. LLVM ships with a homegrown implementation llvm::call_once to help on these platforms.
This change is required in the NetBSD LLDB port. std::call_once with libstdc++ results with crashing the debugger.
Sponsored by <The NetBSD Foundation>
Reviewers: labath, joerg, emaste, mehdi_amini, clayborg
Reviewed By: labath, clayborg
Subscribers: #lldb
Tags: #lldb
Differential Revision: https://reviews.llvm.org/D29288
llvm-svn: 294202
This moves the following classes from Core -> Utility.
ConstString
Error
RegularExpression
Stream
StreamString
The goal here is to get lldbUtility into a state where it has
no dependendencies except on itself and LLVM, so it can be the
starting point at which to start untangling LLDB's dependencies.
These are all low level and very widely used classes, and
previously lldbUtility had dependencies up to lldbCore in order
to use these classes. So moving then down to lldbUtility makes
sense from both the short term and long term perspective in
solving this problem.
Differential Revision: https://reviews.llvm.org/D29427
llvm-svn: 293941
Summary:
Use ProcessLauncherPosixFork in Linux and NetBSD.
Changes to ProcessLauncherLinux:
- Limit personality.h and ASLR code to Linux.
- Reuse portable ptrace(2) PT_TRACE_ME operation available on Linux and BSDs.
- Limit ETXTBSY error path from execve(2) to Linux.
- In LaunchProcess declaration change virtual to override.
This code should be readily available for FreeBSD.
Sponsored by <The NetBSD Foundation>
Reviewers: joerg, clayborg, labath, emaste
Reviewed By: labath
Subscribers: danalbert, srhines, mgorny, #lldb
Tags: #lldb
Differential Revision: https://reviews.llvm.org/D29347
llvm-svn: 293768
Use the LLDB_LOG macro instead of the more verbose if(log) ... syntax.
I have also consolidated the log channels (everything now goes to the posix
channel, instead of a mixture of posix and lldb), and cleaned up some of the
more convoluted log statements.
llvm-svn: 292489
Previously it parsed /proc/<pid>/maps for every module separately
resulting in a very slow response time. This CL add some caching and
optimizes the implementation to improve the code from O(n*m) to O(n+m)
where n is the number of modules requested and m is the number of
files mapped into memory.
Differential revision: https://reviews.llvm.org/D28233
llvm-svn: 290895
This code is currently unused.
Removing it should make porting of the linux plugin to NetBSD easier, and we can
always add it later if needed.
llvm-svn: 289801
My script updated lldb::Errors, and I failed to fix it entirely
before pushing. This restore everything in lldb as it was before
r286561.
llvm-svn: 286565
This is forcing to use Error::success(), which is in a wide majority
of cases a lot more readable.
Differential Revision: https://reviews.llvm.org/D26481
llvm-svn: 286561
Summary:
Check whether the setting the breakpoint failed during instruction emulation. If
it did, the next pc is likely in unmapped memory, and the inferior will crash
anyway after the next instruction. Do not return an error in this case, but just
continue stepping.
Reenabled the crash during step test for android/linux.
Reviewers: labath
Subscribers: aemerson, rengolin, tberghammer, danalbert, srhines, lldb-commits
Differential Revision: https://reviews.llvm.org/D25926
Author: Jason Majors <jmajors@google.com>
llvm-svn: 285187
*** to conform to clang-format’s LLVM style. This kind of mass change has
*** two obvious implications:
Firstly, merging this particular commit into a downstream fork may be a huge
effort. Alternatively, it may be worth merging all changes up to this commit,
performing the same reformatting operation locally, and then discarding the
merge for this particular commit. The commands used to accomplish this
reformatting were as follows (with current working directory as the root of
the repository):
find . \( -iname "*.c" -or -iname "*.cpp" -or -iname "*.h" -or -iname "*.mm" \) -exec clang-format -i {} +
find . -iname "*.py" -exec autopep8 --in-place --aggressive --aggressive {} + ;
The version of clang-format used was 3.9.0, and autopep8 was 1.2.4.
Secondly, “blame” style tools will generally point to this commit instead of
a meaningful prior commit. There are alternatives available that will attempt
to look through this change and find the appropriate prior commit. YMMV.
llvm-svn: 280751
This code represents the Week of Code work I did on bringing up
lldb-server LLGS support for Darwin. It does not include the
Xcode project changes needed, as we don't want to throw that switch
until more support is implemented (i.e. this change is inert, no
build systems use it yet. I've verified on Ubuntu 16.04, macOS
Xcode and macOS cmake builds).
This change does some minimal refactoring of code that is shared
with the Linux LLGS portion, moving it from NativeProcessLinux into
NativeProcessProtocol. That code is also used by NativeProcessDarwin.
Current state on Darwin:
* Process launching is implemented. (Attach is not).
Launching on devices has not yet been tested (FBS/BKS might
need a bit of work).
* Inferior waitpid monitoring and communication of exit status
via MainLoop callback is implemented.
* Memory read/write, breakpoints, thread register context, etc.
are not yet implemented. This impacts process stop/resume, as
the initial launch suspended immediately starts the process
up and running because it doesn't know it is supposed to remain
stopped.
* I implemented the equivalent of MachThreadList as
NativeThreadListDarwin, in anticipation that we might want to
factor out common parts into NativeThreadList{Protocol} and share
some code here. After writing it, though, the fallout from merging
Mach Task/Process into a single concept plus some other minor
changes makes the whole NativeThreadListDarwin concept nothing more
than dead weight. I am likely going to get rid of this class and
just manage it directly in NativeProcessDarwin, much like I did
for NativeProcessLinux.
* There is a stub-out call for starting a STDIO thread. That will
go away and adopt the MainLoop pselect-based IOObject reading.
I am developing the fully-integrated changes in the following repo,
which contains the necessary Xcode bits and the glue that enables
lldb-debugserver on a macOS system:
https://github.com/tfiala/lldb/tree/llgs-darwin
This change also breaks out a few of the lldb-server tests into
their own directory, and adds some $qHostInfo tests (not sure why
I didn't write those tests back when I initially implemented that
on the Linux side).
llvm-svn: 280604
The rewrite of StringExtractor::GetHexMaxU32 changes functionality in a way which makes
lldb-server crash. The crash (assert) happens when parsing the "qRegisterInfo0" packet, because
the function tries to drop_front more bytes than the packet contains. It's not clear to me
whether we should consider this a bug in the caller or the callee, but it any case, it worked
before, so I am reverting this until we can figure out what the proper interface should be.
llvm-svn: 280207
"Incorrect" file name seen on Android whene the main executable is
called "app_process32" (or 64) but the linker specifies the package
name (e.g. com.android.calculator2). Additionally it can be present
in case of some linker bugs.
This CL adds logic to try to fetch the correct file name from the proc
file system based on the base address sepcified by the linker in case
we are failed to load the module by name.
Differential revision: http://reviews.llvm.org/D22219
llvm-svn: 276411
Summary:
We've had two copies of code for launching processes:
- one in NativeProcessLinux, used for launching debugged processes
- one in ProcessLauncherAndroid, used on android for launching all other kinds of processes
These have over time acquired support for various launch options, but neither supported all of
them. I now replace them with a single implementation ProcessLauncherLinux, which supports all
the options the individual versions supported and set it to be used to launch all processes on
linux.
This also works around the ETXTBSY issue on android when the process is started from the platform
instance, as that used to go through the version which did not contain the workaround.
Reviewers: tberghammer
Subscribers: tberghammer, danalbert, srhines, lldb-commits
Differential Revision: https://reviews.llvm.org/D22457
llvm-svn: 276288
Summary:
This removes one level of indirection, which was just packing and repacking launch args into
different structures. NFC.
Reviewers: tberghammer
Subscribers: lldb-commits
Differential Revision: https://reviews.llvm.org/D22357
llvm-svn: 275544
Pavel Labath