The CvRecordPdb70 structure looks like:
struct CvRecordPdb70 {
uint8_t Uuid[16];
llvm::support::ulittle32_t Age;
// char PDBFileName[];
};
We were including the "Age" in the UUID for Apple vedors which caused us to not be able to match the UUID to built binaries. The "Age" field is set to zero in breakpad minidump files for Apple targets.
Differential Revision: https://reviews.llvm.org/D51442
llvm-svn: 340966
In this patch I add support for ARM and ARM64 break pad files. There are two flavors of ARM: Apple where FP is R7, and non Apple where FP is R11. Added minimal tests that load up ARM64 and the two flavors or ARM core files with a single thread and known register values in each register. Each register is checked for the exact value.
This is a fixed version of: https://reviews.llvm.org/D49750
The changes from D49750 are:
Don't init the m_arch in the Initialize call as a system info isn't required. This keeps the thread list, module list and other tests from failing
Added -Wextended-offsetof to Xcode project so we catch use extended usages of offsetof before submission
Fixed any extended offset of warnings
Differential Revision: https://reviews.llvm.org/D50336
llvm-svn: 339032
This reverts commit r338734 (and subsequent fixups in r338772 and
r338746), because it breaks some minidump unit tests and introduces a
lot of compiler warnings.
llvm-svn: 338828
In this patch I add support for ARM and ARM64 break pad files. There are two flavors of ARM: Apple where FP is R7, and non Apple where FP is R11. Added minimal tests that load up ARM64 and the two flavors or ARM core files with a single thread and known register values in each register. Each register is checked for the exact value.
Differential Revision: https://reviews.llvm.org/D49750
llvm-svn: 338734
Corrupted minidumps was leading to unpredictable behavior.
This change adds explicit consistency checks for the minidump early on. The
checks are not comprehensive but they should catch obvious structural violations:
streams with type == 0
duplicate streams (same type)
overlapping streams
truncated minidumps
Another early check is to make sure we actually support the minidump architecture
instead of crashing at a random place deep inside LLDB.
Differential Revision: https://reviews.llvm.org/D49202
llvm-svn: 336918
Summary:
During the previous attempt to generalize the UUID class, it was
suggested that we represent invalid UUIDs as length zero (previously, we
used an all-zero UUID for that). This meant that some valid build-ids
could not be represented (it's possible however unlikely that a checksum of
some file would be zero) and complicated adding support for variable
length build-ids (should a 16-byte empty UUID compare equal to a 20-byte
empty UUID?).
This patch resolves these issues by introducing a canonical
representation for an invalid UUID. The slight complication here is that
some clients (MachO) actually use the all-zero notation to mean "no UUID
has been set". To keep this use case working (while making it very
explicit about which construction semantices are wanted), replaced the
UUID constructors and the SetBytes functions with named factory methods.
- "fromData" creates a UUID from the given data, and it treats all bytes
equally.
- "fromOptionalData" first checks the data contents - if all bytes are
zero, it treats this as an invalid/empty UUID.
Reviewers: clayborg, sas, lemo, davide, espindola
Subscribers: emaste, lldb-commits, arichardson
Differential Revision: https://reviews.llvm.org/D48479
llvm-svn: 335612
This change adds support for two types of Minidump CodeView records:
PDB70 (reference: https://crashpad.chromium.org/doxygen/structcrashpad_1_1CodeViewRecordPDB70.html)
This is by far the most common record type.
ELF BuildID (found in Breakpad/Crashpad generated minidumps)
This would set a proper UUID for placeholder modules, in turn enabling
an accurate match with local module images.
Differential Revision: https://reviews.llvm.org/D46292
llvm-svn: 331394
This is intended as a clean up after the big clang-format commit
(r280751), which unfortunately resulted in many of the comment
paragraphs in LLDB being very hard to read.
FYI, the script I used was:
import textwrap
import commands
import os
import sys
import re
tmp = "%s.tmp"%sys.argv[1]
out = open(tmp, "w+")
with open(sys.argv[1], "r") as f:
header = ""
text = ""
comment = re.compile(r'^( *//) ([^ ].*)$')
special = re.compile(r'^((([A-Z]+[: ])|([0-9]+ )).*)|(.*;)$')
for line in f:
match = comment.match(line)
if match and not special.match(match.group(2)):
# skip intentionally short comments.
if not text and len(match.group(2)) < 40:
out.write(line)
continue
if text:
text += " " + match.group(2)
else:
header = match.group(1)
text = match.group(2)
continue
if text:
filled = textwrap.wrap(text, width=(78-len(header)),
break_long_words=False)
for l in filled:
out.write(header+" "+l+'\n')
text = ""
out.write(line)
os.rename(tmp, sys.argv[1])
Differential Revision: https://reviews.llvm.org/D46144
llvm-svn: 331197
This renames the LLDB error class to Status, as discussed
on the lldb-dev mailing list.
A change of this magnitude cannot easily be done without
find and replace, but that has potential to catch unwanted
occurrences of common strings such as "Error". Every effort
was made to find all the obvious things such as the word "Error"
appearing in a string, etc, but it's possible there are still
some lingering occurences left around. Hopefully nothing too
serious.
llvm-svn: 302872
Summary:
This plugin resembles the already existing Windows-only Minidump plugin.
The WinMinidumpPlugin uses the Windows API for parsing Minidumps
while this plugin is cross-platform because it includes a Minidump
parser (which is already commited)
It is able to produce a backtrace, to read the general puprose regiters,
inspect local variables, show image list, do memory reads, etc.
For now the only arches that this supports are x86_32 and x86_64.
This is because I have only written register contexts for those.
Others will come in next CLs.
I copied the WinMinidump tests and adapted them a little bit for them to
work with the new plugin (and they pass)
I will add more tests, aiming for better code coverage.
There is still functionality to be added, see TODOs in code.
Reviewers: labath, zturner
Subscribers: beanz, mgorny, modocache, lldb-commits, amccarth
Differential Revision: https://reviews.llvm.org/D25905
llvm-svn: 285587
Summary:
Now the Minidump parser can parse the:
1) MemoryInfoList - containing region info about memory ranges (readable,
writable, executable)
2) Memory64List - this is the stuct used when the Minidump is a
full-memory one.
3) Adding filtering of the module list (shared libraries list) - there
can be mutliple records in the module list under the same name but with
different load address (e.g. when the binary has non contigious
sections). FilterModuleList eliminates the duplicated modules, leaving
the one with the lowest load addr.
Added unit tests for everything.
Reviewers: labath, zturner
Subscribers: beanz, mgorny, modocache, lldb-commits, amccarth
Differential Revision: https://reviews.llvm.org/D25569
llvm-svn: 284593
Tests are failing and build is failing on windows and darwin.
Will fix and commit it later
-------------------------------------------------------------
Revert "xfailing minidump tests again ... :("
This reverts commit 97eade002c9e43c1e0d11475a4888083a8965044.
Revert "Fixing new Minidump plugin tests"
This reverts commit 0dd93b3ab39c8288696001dd50b9a093b813b09c.
Revert "Add the new minidump files to the Xcode project."
This reverts commit 2f638a1d046b8a88e61e212220edc40aecd2ce44.
Revert "xfailing tests for Minidump plugin"
This reverts commit 99311c0b22338a83e6a00c4fbddfd3577914c003.
Revert "Adding a new Minidump post-mortem debugging plugin"
This reverts commit b09a7e4dae231663095a84dac4be3da00b03a021.
llvm-svn: 283352
Summary:
This plugin resembles the already existing Windows-only Minidump plugin.
The WinMinidumpPlugin uses the Windows API for parsing Minidumps
while this plugin is cross-platform because it includes a Minidump
parser (which is already commited)
It is able to produce a backtrace, to read the general puprose regiters,
inspect local variables, show image list, do memory reads, etc.
For now the only arch that this supports is x86 64 bit
This is because I have only written a register context for that arch.
Others will come in next CLs.
I copied the WinMinidump tests and adapted them a little bit for them to
work with the new plugin (and they pass)
I will add more tests, aiming for better code coverage.
There is still functionality to be added, see TODOs in code.
Reviewers: labath, zturner
Subscribers: beanz, mgorny, amccarth, lldb-commits, modocache
Differential Revision: https://reviews.llvm.org/D25196
llvm-svn: 283259
Summary:
This is a register context converter from Minidump to Linux reg context.
This knows the layout of the register context in the Minidump file
(which is the same as in Windows FYI) and as a result emits a binary data
buffer that matches the Linux register context binary layout.
This way we can reuse the existing RegisterContextLinux_x86_64 and
RegisterContextCorePOSIX_x86_64 classes.
Reviewers: labath, zturner
Subscribers: beanz, mgorny, lldb-commits, amccarth
Differential Revision: https://reviews.llvm.org/D24919
llvm-svn: 282529
Summary:
Added parsing of the MiscInfo data stream.
The main member of it that we care about is the process_id
On Linux generated Minidump (from breakpad) we don't have
the MiscInfo, we have the /proc/$pid/status from where we can get the
pid.
Also parsing the module list - the list of all of the loaded
modules/shared libraries.
Parsing the exception stream.
Parsing MinidumpStrings.
I have unit tests for all of that.
Also added some tests using a Minidump generated from Windows tools (not
from breakpad)
Reviewers: labath, zturner
Subscribers: beanz, lldb-commits
Differential Revision: https://reviews.llvm.org/D24385
llvm-svn: 281348
Summary:
It fixes the following compile warnings:
1. '0' flag ignored with precision and ‘%d’ gnu_printf format
2. enumeral and non-enumeral type in conditional expression
3. format ‘%d’ expects argument of type ‘int’, but argument 4 has type ...
4. enumeration value ‘...’ not handled in switch
5. cast from type ‘const uint64_t* {aka ...}’ to type ‘int64_t* {aka ...}’ casts away qualifiers
6. extra ‘;’
7. comparison between signed and unsigned integer expressions
8. variable ‘register_operand’ set but not used
9. control reaches end of non-void function
Reviewers: jingham, emaste, zturner, clayborg
Subscribers: lldb-commits
Differential Revision: https://reviews.llvm.org/D24331
llvm-svn: 281191
*** to conform to clang-format’s LLVM style. This kind of mass change has
*** two obvious implications:
Firstly, merging this particular commit into a downstream fork may be a huge
effort. Alternatively, it may be worth merging all changes up to this commit,
performing the same reformatting operation locally, and then discarding the
merge for this particular commit. The commands used to accomplish this
reformatting were as follows (with current working directory as the root of
the repository):
find . \( -iname "*.c" -or -iname "*.cpp" -or -iname "*.h" -or -iname "*.mm" \) -exec clang-format -i {} +
find . -iname "*.py" -exec autopep8 --in-place --aggressive --aggressive {} + ;
The version of clang-format used was 3.9.0, and autopep8 was 1.2.4.
Secondly, “blame” style tools will generally point to this commit instead of
a meaningful prior commit. There are alternatives available that will attempt
to look through this change and find the appropriate prior commit. YMMV.
llvm-svn: 280751
Summary:
This is a Minidump parsing code.
There are still some more structures/data streams that need to be added.
The aim ot this is to be used in the implementation of
a minidump debugging plugin that works on all platforms/architectures.
Currently we have a windows-only plugin that uses the WinAPI to parse
the dump files.
Also added unittests for the current functionality.
Reviewers: labath, amccarth
Subscribers: tberghammer, danalbert, srhines, lldb-commits, dschuff
Differential Revision: https://reviews.llvm.org/D23545
llvm-svn: 280356
Greg Clayton