whether they have missing header files.
Whether a module's headers happen to be present on the local file system
should make no difference to whether we make its contents visible when
importing another module that re-exports it. If we have an up-to-date
AST file that we can load, that's all that matters.
This fixes the ability to header syntax checking for modular headers in
C++20 mode (or in prior modes where -fmodules-local-submodule-visibility
is enabled but -fmodules is not).
modules too.
This more accurately reflects the semantics of this flag, as distinct
from "IsAvailable", which (in an explicit modules world) only describes
whether a module is buildable, not whether it's importable.
This is needed to fix the reason
0a2be46cfd (Modules: Invalidate out-of-date PCMs as they're
discovered) and 5b44a4b07fc1d ([modules] Do not cache invalid state for
modules that we attempted to load.) were reverted.
These patches changed Clang to use `isVolatile` when loading modules.
This had the side effect of not using mmap when loading modules, and
thus greatly increased memory usage.
The reason it wasn't using mmap is because `MemoryBuffer` plays some
games with file size when you request null termination, and it has to
disable these when `isVolatile` is set as the size may change by the
time it's mmapped. Clang by default passes
`RequiresNullTerminator = true`, and `shouldUseMmap` ignored if
`RequiresNullTerminator` was even requested.
This patch adds `RequiresNullTerminator` to the `FileManager` interface
so Clang can use it when loading modules, and changes `shouldUseMmap` to
only take volatility into account if `RequiresNullTerminator` is true.
This is fine as both `mmap` and a `read` loop are vulnerable to
modifying the file while reading, but are immune to the rename Clang
does when replacing a module file.
Differential Revision: https://reviews.llvm.org/D77772
This symbol is defined in avr-gcc. Because AVR normally uses the ELF
format, define the symbol unconditionally.
This patch is needed to get Clang to compile compiler-rt.
Differential Revision: https://reviews.llvm.org/D78117
Generate PTX using newer versions of PTX and allow using sm_80 with CUDA-11.
None of the new features of CUDA-10.2+ have been implemented yet, so using these
versions will still produce a warning.
Differential Revision: https://reviews.llvm.org/D77670
Instead of hardcoding individual GPU mappings in multiple functions, keep them
all in one table and use it to look up the mappings.
We also don't care about 'virtual' architecture much, so the API is trimmed down
down to a simpler GPU->Virtual arch name lookup.
Differential Revision: https://reviews.llvm.org/D77665
Move the listing of allowed clauses per OpenMP directive to the new
macro file in `llvm/Frontend/OpenMP`. Also, use a single generic macro
that specifies the directive and one allowed clause explicitly instead
of a dedicated macro per directive.
We save 800 loc and boilerplate for all new directives/clauses with no
functional change. We also need to include the macro file only once and
not once per directive.
Depends on D77112.
Reviewed By: JonChesterfield
Differential Revision: https://reviews.llvm.org/D77113
This is a cleanup and normalization patch that also enables reuse with
Flang later on. A follow up will clean up and move the directive ->
clauses mapping.
Reviewed By: fghanim
Differential Revision: https://reviews.llvm.org/D77112
Summary:
- `RegisterVar` has `void` return type and `size_t` in its variable size
parameter in HIP or CUDA 9.0+.
Reviewers: tra, yaxunl
Subscribers: cfe-commits
Tags: #clang
Differential Revision: https://reviews.llvm.org/D77398
Summary:
As defined by Arm C Language Extensions (ACLE) these macro defines
should be set to specific values depending on -mbranch-protection.
Reviewers: chill
Reviewed By: chill
Subscribers: danielkiss, cfe-commits, kristof.beyls
Tags: #clang
Differential Revision: https://reviews.llvm.org/D77134
This is a cleanup and normalization patch that also enables reuse with
Flang later on. A follow up will clean up and move the directive ->
clauses mapping.
Differential Revision: https://reviews.llvm.org/D77112
This API is used by LLDB to attach owning module information to
Declarations deserialized from DWARF.
Differential Revision: https://reviews.llvm.org/D75561
Currently, bpf does not specify 128bit alignment in its
layout spec. So for a structure like
struct ipv6_key_t {
unsigned pid;
unsigned __int128 saddr;
unsigned short lport;
};
clang will generate IR type
%struct.ipv6_key_t = type { i32, [12 x i8], i128, i16, [14 x i8] }
Additional padding is to ensure later IR->MIR can generate correct
stack layout with target layout spec.
But it is common practice for a tracing program to be
first compiled with target flag (e.g., x86_64 or aarch64) through
clang to generate IR and then go through llc to generate bpf
byte code. Tracing program often refers to kernel internal
data structures which needs to be compiled with non-bpf target.
But such a compilation model may cause a problem on aarch64.
The bcc issue https://github.com/iovisor/bcc/issues/2827
reported such a problem.
For the above structure, since aarch64 has "i128:128" in its
layout string, the generated IR will have
%struct.ipv6_key_t = type { i32, i128, i16 }
Since bpf does not have "i128:128" in its spec string,
the selectionDAG assumes alignment 8 for i128 and
computes the stack storage size for the above is 32 bytes,
which leads incorrect code later.
The x86_64 does not have this issue as it does not have
"i128:128" in its layout spec as it does permits i128 to
be alignmented at 8 bytes at stack. Its IR type looks like
%struct.ipv6_key_t = type { i32, [12 x i8], i128, i16, [14 x i8] }
The fix here is add i128 support in layout spec, the same as
aarch64. The only downside is we may have less optimal stack
allocation in certain cases since we require 16byte alignment
for i128 instead of 8. But this is probably fine as i128 is
not used widely and in most cases users should already
have proper alignment.
Differential Revision: https://reviews.llvm.org/D76587
The main purpose of introducing these builtins is to add a range
metadata [1, 1025) on the work group size loaded from dispatch
ptr, which cannot be done by source code.
Differential Revision: https://reviews.llvm.org/D76772
This is the first part extracted from D71179 and cleaned up.
This patch provides parsing support for `omp begin/end declare variant`,
as defined in OpenMP technical report 8 (TR8) [0].
A major purpose of this patch is to provide proper math.h/cmath support
for OpenMP target offloading. See PR42061, PR42798, PR42799. The current
code was developed with this feature in mind, see [1].
[0] https://www.openmp.org/wp-content/uploads/openmp-TR8.pdf
[1] https://reviews.llvm.org/D61399#change-496lQkg0mhRN
Reviewed By: aaron.ballman
Differential Revision: https://reviews.llvm.org/D74941
Summary:
This patch introduces command-line support for the Armv8.6-a architecture and assembly support for BFloat16. Details can be found
https://community.arm.com/developer/ip-products/processors/b/processors-ip-blog/posts/arm-architecture-developments-armv8-6-a
in addition to the GCC patch for the 8..6-a CLI:
https://gcc.gnu.org/legacy-ml/gcc-patches/2019-11/msg02647.html
In detail this patch
- march options for armv8.6-a
- BFloat16 assembly
This is part of a patch series, starting with command-line and Bfloat16
assembly support. The subsequent patches will upstream intrinsics
support for BFloat16, followed by Matrix Multiplication and the
remaining Virtualization features of the armv8.6-a architecture.
Based on work by:
- labrinea
- MarkMurrayARM
- Luke Cheeseman
- Javed Asbar
- Mikhail Maltsev
- Luke Geeson
Reviewers: SjoerdMeijer, craig.topper, rjmccall, jfb, LukeGeeson
Reviewed By: SjoerdMeijer
Subscribers: stuij, kristof.beyls, hiraditya, dexonsmith, danielkiss, cfe-commits, llvm-commits
Tags: #clang, #llvm
Differential Revision: https://reviews.llvm.org/D76062
Summary:
This patch adds a virtual method `getCPUCacheLineSize()` to `TargetInfo`. Currently, I've only implemented the method in `X86TargetInfo`. It's extremely important that each CPU's cache line size correct (e.g., we can't just define it as `64` across the board) so, it has been a little slow getting to this point.
I'll work on the ARM CPUs next, but that will probably come later in a different patch.
Tags: #clang
Differential Revision: https://reviews.llvm.org/D74918
Currently square-bracket-style (CXX11/C2X) attribute names are normalised to
start with :: if they don't have a namespace. This is a bit odd, as such
names are rejected when parsing, so don't do this.
Differential Revision: https://reviews.llvm.org/D76704
Reworked the patch to avoid sharing a header (SVETypeFlags.h) between
include/clang/Basic and utils/TableGen/SveEmitter.cpp. Now the patch
generates the enum/flags which is included in TargetBuiltins.h.
Also renamed one of the SveEmitter options to be in line with MVE.
Summary:
This is a first patch in a series for the SveEmitter to generate the arm_sve.h
header file and builtins.
I've tried my best to strip down this patch as best as I could, but there
are still a few changes that are not necessarily exercised by the load intrinsics
in this patch, mostly around the SVEType class which has some common logic to
represent types from a type and prototype string. I thought it didn't make
much sense to remove that from this patch and split it up.
This flag is used by avr-gcc (starting with v10) to set the width of the
double type. The double type is by default interpreted as a 32-bit
floating point number in avr-gcc instead of a 64-bit floating point
number as is common on other architectures. Starting with GCC 10, a new
option has been added to control this behavior:
https://gcc.gnu.org/wiki/avr-gcc#Deviations_from_the_Standard
This commit keeps the default double at 32 bits but adds support for the
-mdouble flag (-mdouble=32 and -mdouble=64) to control this behavior.
Differential Revision: https://reviews.llvm.org/D76181
Summary:
Adds the constraints described below to ensure that we
can tie variables of SVE ACLE types to operands in inline-asm:
- y: SVE registers Z0-Z7
- Upl: One of the low eight SVE predicate registers (P0-P7)
- Upa: Full range of SVE predicate registers (P0-P15)
Reviewers: sdesmalen, huntergr, rovka, cameron.mcinally, efriedma, rengolin
Reviewed By: efriedma
Subscribers: miyuki, tschuett, rkruppe, psnobl, cfe-commits
Tags: #clang
Differential Revision: https://reviews.llvm.org/D75690
This is a first patch in a series for the SveEmitter to generate the arm_sve.h
header file and builtins.
I've tried my best to strip down this patch as best as I could, but there
are still a few changes that are not necessarily exercised by the load intrinsics
in this patch, mostly around the SVEType class which has some common logic to
represent types from a type and prototype string. I thought it didn't make
much sense to remove that from this patch and split it up.
Reviewers: efriedma, rovka, SjoerdMeijer, rsandifo-arm, rengolin
Reviewed By: SjoerdMeijer
Tags: #clang
Differential Revision: https://reviews.llvm.org/D75470
Most clients of SourceManager.h need to do things like turning source
locations into file & line number pairs, but this doesn't require
bringing in FileManager.h and LLVM's FS headers.
The main code change here is to sink SM::createFileID into the cpp file.
I reason that this is not performance critical because it doesn't happen
on the diagnostic path, it happens along the paths of macro expansion
(could be hot) and new includes (less hot).
Saves some includes:
309 - /usr/local/google/home/rnk/llvm-project/clang/include/clang/Basic/FileManager.h
272 - /usr/local/google/home/rnk/llvm-project/clang/include/clang/Basic/FileSystemOptions.h
271 - /usr/local/google/home/rnk/llvm-project/llvm/include/llvm/Support/VirtualFileSystem.h
267 - /usr/local/google/home/rnk/llvm-project/llvm/include/llvm/Support/FileSystem.h
266 - /usr/local/google/home/rnk/llvm-project/llvm/include/llvm/Support/Chrono.h
Differential Revision: https://reviews.llvm.org/D75406
Module.h takes 86ms to parse, mostly parsing the class itself. Avoid it
if possible. ASTContext.h depends on ExternalASTSource.h.
A few NFC changes were needed to make this possible:
- Move ASTSourceDescriptor to Module.h. This needs Module to be
complete, and seems more related to modules and AST files than
external AST sources.
- Move "import complete" bit from Module* pointer int pair to
NextLocalImport pointer. Required because PointerIntPair<Module*,...>
requires Module to be complete, and now it may not be.
Reviewed By: aaron.ballman, hans
Differential Revision: https://reviews.llvm.org/D75784
Summary:
This patch implements feature test macros for the CDE extension
according to the upcoming ACLE specification.
The following 2 macros are being added:
- __ARM_FEATURE_CDE - defined as '1' when any coprocessor is
configured as a CDE coprocessor
- __ARM_FEATURE_CDE_COPROC - defined as an 8-bit mask, each bit of the
mask corresponds to a coprocessor and is set when the corresponding
coprocessor is configured as CDE (and cleared otherwise).
The patch also exposes the value of __ARM_FEATURE_CDE_COPROC in the
target-independent method TargetInfo::getARMCDECorpocMask, the method
will be used in follow-up patches implementing semantic checks of CDE
intrinsics (we want to diagnose the cases when CDE intrinsics are used
with coprocessors that are not configured as CDE).
Reviewers: simon_tatham, dmgreen, ostannard, MarkMurrayARM
Reviewed By: simon_tatham
Subscribers: kristof.beyls, danielkiss, cfe-commits
Tags: #clang
Differential Revision: https://reviews.llvm.org/D75843
FileManager.h is an expensive header (~350ms for me in isolation), so
try to do without it.
Notably, we need to avoid checking the alignment of FileEntry, which
happens for DenseMap<FileEntry*> and PointerUnion<FileEntry*>. I
adjusted the code to avoid PointerUnion, and moved the DenseMap
insertion to the .cpp file.
Globally, this only saved about ~17 includes of the related headers
because SourceManager.h still includes FileManager.h, and it is more
popular than Module.h.
When constructing a ParsedAttr the ParsedAttrInfo gets looked up in the
AttrInfoMap, which is auto-generated using tablegen. If that lookup fails then
we look through the ParsedAttrInfos that plugins have added to the registry and
check if any has a spelling that matches.
Differential Revision: https://reviews.llvm.org/D31338
This PR enables "XL" C++ ABI in frontend AST to IR codegen. And it is driven by
static init work. The current kind in Clang by default is Generic Itanium, which
has different behavior on static init with IBM xlclang compiler on AIX.
Differential Revision: https://reviews.llvm.org/D74015
Make Clang on aarch64 targets predefine `__AARCH64_CMODEL_SMALL__`
or `__AARCH64_CMODEL_TINY__`, etc. These are the names that GCC
uses for its predefines.
Reviewed By: tamur, MaskRay
Differential Revision: https://reviews.llvm.org/D75002
This commit removes the artificial types <512 x i1> and <1024 x i1>
from HVX intrinsics, and makes v512i1 and v1024i1 no longer legal on
Hexagon.
It may cause existing bitcode files to become invalid.
* Converting between vector predicates and vector registers must be
done explicitly via vandvrt/vandqrt instructions (their intrinsics),
i.e. (for 64-byte mode):
%Q = call <64 x i1> @llvm.hexagon.V6.vandvrt(<16 x i32> %V, i32 -1)
%V = call <16 x i32> @llvm.hexagon.V6.vandqrt(<64 x i1> %Q, i32 -1)
The conversion intrinsics are:
declare <64 x i1> @llvm.hexagon.V6.vandvrt(<16 x i32>, i32)
declare <128 x i1> @llvm.hexagon.V6.vandvrt.128B(<32 x i32>, i32)
declare <16 x i32> @llvm.hexagon.V6.vandqrt(<64 x i1>, i32)
declare <32 x i32> @llvm.hexagon.V6.vandqrt.128B(<128 x i1>, i32)
They are all pure.
* Vector predicate values cannot be loaded/stored directly. This directly
reflects the architecture restriction. Loading and storing or vector
predicates must be done indirectly via vector registers and explicit
conversions via vandvrt/vandqrt instructions.
This swaps out the OpenMPDefaultClauseKind enum with a
llvm::omp::DefaultKind enum which is stored in OMPConstants.h.
This should not change any functionality.
Reviewed By: jdoerfert
Differential Revision: https://reviews.llvm.org/D74513
This patch implements an almost complete handling of OpenMP
contexts/traits such that we can reuse most of the logic in Flang
through the OMPContext.{h,cpp} in llvm/Frontend/OpenMP.
All but construct SIMD specifiers, e.g., inbranch, and the device ISA
selector are define in `llvm/lib/Frontend/OpenMP/OMPKinds.def`. From
these definitions we generate the enum classes `TraitSet`,
`TraitSelector`, and `TraitProperty` as well as conversion and helper
functions in `llvm/lib/Frontend/OpenMP/OMPContext.{h,cpp}`.
The above enum classes are used in the parser, sema, and the AST
attribute. The latter is not a collection of multiple primitive variant
arguments that contain encodings via numbers and strings but instead a
tree that mirrors the `match` clause (see `struct OpenMPTraitInfo`).
The changes to the parser make it more forgiving when wrong syntax is
read and they also resulted in more specialized diagnostics. The tests
are updated and the core issues are detected as before. Here and
elsewhere this patch tries to be generic, thus we do not distinguish
what selector set, selector, or property is parsed except if they do
behave exceptionally, as for example `user={condition(EXPR)}` does.
The sema logic changed in two ways: First, the OMPDeclareVariantAttr
representation changed, as mentioned above, and the sema was adjusted to
work with the new `OpenMPTraitInfo`. Second, the matching and scoring
logic moved into `OMPContext.{h,cpp}`. It is implemented on a flat
representation of the `match` clause that is not tied to clang.
`OpenMPTraitInfo` provides a method to generate this flat structure (see
`struct VariantMatchInfo`) by computing integer score values and boolean
user conditions from the `clang::Expr` we keep for them.
The OpenMP context is now an explicit object (see `struct OMPContext`).
This is in anticipation of construct traits that need to be tracked. The
OpenMP context, as well as the `VariantMatchInfo`, are basically made up
of a set of active or respectively required traits, e.g., 'host', and an
ordered container of constructs which allows duplication. Matching and
scoring is kept as generic as possible to allow easy extension in the
future.
---
Test changes:
The messages checked in `OpenMP/declare_variant_messages.{c,cpp}` have
been auto generated to match the new warnings and notes of the parser.
The "subset" checks were reversed causing the wrong version to be
picked. The tests have been adjusted to correct this.
We do not print scores if the user did not provide one.
We print spaces to make lists in the `match` clause more legible.
Reviewers: kiranchandramohan, ABataev, RaviNarayanaswamy, gtbercea, grokos, sdmitriev, JonChesterfield, hfinkel, fghanim
Subscribers: merge_guards_bot, rampitec, mgorny, hiraditya, aheejin, fedor.sergeev, simoncook, bollu, guansong, dexonsmith, jfb, s.egerton, llvm-commits, cfe-commits
Tags: #clang, #llvm
Differential Revision: https://reviews.llvm.org/D71830
Implement protection against the stack clash attack [0] through inline stack
probing.
Probe stack allocation every PAGE_SIZE during frame lowering or dynamic
allocation to make sure the page guard, if any, is touched when touching the
stack, in a similar manner to GCC[1].
This extends the existing `probe-stack' mechanism with a special value `inline-asm'.
Technically the former uses function call before stack allocation while this
patch provides inlined stack probes and chunk allocation.
Only implemented for x86.
[0] https://www.qualys.com/2017/06/19/stack-clash/stack-clash.txt
[1] https://gcc.gnu.org/ml/gcc-patches/2017-07/msg00556.html
This a recommit of 39f50da2a3 with proper LiveIn
declaration, better option handling and more portable testing.
Differential Revision: https://reviews.llvm.org/D68720
Implement protection against the stack clash attack [0] through inline stack
probing.
Probe stack allocation every PAGE_SIZE during frame lowering or dynamic
allocation to make sure the page guard, if any, is touched when touching the
stack, in a similar manner to GCC[1].
This extends the existing `probe-stack' mechanism with a special value `inline-asm'.
Technically the former uses function call before stack allocation while this
patch provides inlined stack probes and chunk allocation.
Only implemented for x86.
[0] https://www.qualys.com/2017/06/19/stack-clash/stack-clash.txt
[1] https://gcc.gnu.org/ml/gcc-patches/2017-07/msg00556.html
This a recommit of 39f50da2a3 with proper LiveIn
declaration, better option handling and more portable testing.
Differential Revision: https://reviews.llvm.org/D68720
Implement protection against the stack clash attack [0] through inline stack
probing.
Probe stack allocation every PAGE_SIZE during frame lowering or dynamic
allocation to make sure the page guard, if any, is touched when touching the
stack, in a similar manner to GCC[1].
This extends the existing `probe-stack' mechanism with a special value `inline-asm'.
Technically the former uses function call before stack allocation while this
patch provides inlined stack probes and chunk allocation.
Only implemented for x86.
[0] https://www.qualys.com/2017/06/19/stack-clash/stack-clash.txt
[1] https://gcc.gnu.org/ml/gcc-patches/2017-07/msg00556.html
This a recommit of 39f50da2a3 with better option
handling and more portable testing
Differential Revision: https://reviews.llvm.org/D68720
Implement protection against the stack clash attack [0] through inline stack
probing.
Probe stack allocation every PAGE_SIZE during frame lowering or dynamic
allocation to make sure the page guard, if any, is touched when touching the
stack, in a similar manner to GCC[1].
This extends the existing `probe-stack' mechanism with a special value `inline-asm'.
Technically the former uses function call before stack allocation while this
patch provides inlined stack probes and chunk allocation.
Only implemented for x86.
[0] https://www.qualys.com/2017/06/19/stack-clash/stack-clash.txt
[1] https://gcc.gnu.org/ml/gcc-patches/2017-07/msg00556.html
This a recommit of 39f50da2a3 with correct option
flags set.
Differential Revision: https://reviews.llvm.org/D68720
This reverts commit 39f50da2a3.
The -fstack-clash-protection is being passed to the linker too, which
is not intended.
Reverting and fixing that in a later commit.
Implement protection against the stack clash attack [0] through inline stack
probing.
Probe stack allocation every PAGE_SIZE during frame lowering or dynamic
allocation to make sure the page guard, if any, is touched when touching the
stack, in a similar manner to GCC[1].
This extends the existing `probe-stack' mechanism with a special value `inline-asm'.
Technically the former uses function call before stack allocation while this
patch provides inlined stack probes and chunk allocation.
Only implemented for x86.
[0] https://www.qualys.com/2017/06/19/stack-clash/stack-clash.txt
[1] https://gcc.gnu.org/ml/gcc-patches/2017-07/msg00556.html
Differential Revision: https://reviews.llvm.org/D68720
Summary:
For now, this ABI simply expands all possible aggregate arguments and
returns all possible aggregates directly. This ABI will change rapidly
as we prototype and benchmark a new ABI that takes advantage of
multivalue return and possibly other changes from the MVP ABI.
Reviewers: aheejin, dschuff
Subscribers: sbc100, jgravelle-google, sunfish, cfe-commits
Tags: #clang
Differential Revision: https://reviews.llvm.org/D72972
AMDGPU and x86 at least both have separate controls for whether
denormal results are flushed on output, and for whether denormals are
implicitly treated as 0 as an input. The current DAGCombiner use only
really cares about the input treatment of denormals.
Summary:
This patch changes the underlying type of the ARM::ArchExtKind
enumeration to uint64_t and adjusts the related code.
The goal of the patch is to prepare the code base for a new
architecture extension.
Reviewers: simon_tatham, eli.friedman, ostannard, dmgreen
Reviewed By: dmgreen
Subscribers: merge_guards_bot, kristof.beyls, hiraditya, cfe-commits, llvm-commits, pbarrio
Tags: #clang, #llvm
Differential Revision: https://reviews.llvm.org/D73906
This is how it should've been and brings it more in line with
std::string_view. There should be no functional change here.
This is mostly mechanical from a custom clang-tidy check, with a lot of
manual fixups. It uncovers a lot of minor inefficiencies.
This doesn't actually modify StringRef yet, I'll do that in a follow-up.
This makes clang somewhat forward-compatible with new CUDA releases
without having to patch it for every minor release without adding
any new function.
If an unknown version is found, clang issues a warning (can be disabled
with -Wno-cuda-unknown-version) and assumes that it has detected
the latest known version. CUDA releases are usually supersets
of older ones feature-wise, so it should be sufficient to keep
released clang versions working with minor CUDA updates without
having to upgrade clang, too.
Differential Revision: https://reviews.llvm.org/D73231
This CL adds clang declarations of built-in functions for AMDGPU MFMA intrinsics and instructions.
OpenCL tests for new built-ins are included.
Differential Revision: https://reviews.llvm.org/D72723
Summary:
As discussed in http://lists.llvm.org/pipermail/cfe-dev/2019-October/063459.html
the overflow of the souce locations (limited to 2^31 chars) can generate all sorts of
weird things (bogus warnings, hangs, crashes, miscompilation and correct compilation).
In debug mode this assert would fail. So it might be a good start, as in PR42301,
to detect the failure and exit with a proper error message.
Reviewers: rsmith, thakis, miyuki
Reviewed By: miyuki
Subscribers: cfe-commits
Tags: #clang
Differential Revision: https://reviews.llvm.org/D70183
Since 2009 (in r63846) we've been `#define`-ing OBJC_NEW_PROPERTIES all
the time on Darwin, but this macro only makes sense for `-x objective-c`
and `-x objective-c++`. Restrict it to those cases (for which there is
already separate logic).
https://reviews.llvm.org/D72970
rdar://problem/10050342
Summary:
This adds the reference types target feature. This does not enable any
more functionality in LLVM/clang for now, but this is necessary to embed
the info in the target features section, which is used by Binaryen and
Emscripten. It turned out that after D69832 `-fwasm-exceptions` crashed
because we didn't have the reference types target feature.
Reviewers: tlively
Subscribers: dschuff, sbc100, jgravelle-google, hiraditya, sunfish, cfe-commits, llvm-commits
Tags: #clang, #llvm
Differential Revision: https://reviews.llvm.org/D73320
This adds basic support for the Swift calling convention with WebAssembly
targets.
Reviewed By: dschuff
Differential Revision: https://reviews.llvm.org/D71823
Now with concepts support merged and mostly complete, we do not need -fconcepts-ts
(which was also misleading as we were not implementing the TS) and can enable
concepts features under C++2a. A warning will be generated if users still attempt
to use -fconcepts-ts.
Currently there are 4 different mechanisms for controlling denormal
flushing behavior, and about as many equivalent frontend controls.
- AMDGPU uses the fp32-denormals and fp64-f16-denormals subtarget features
- NVPTX uses the nvptx-f32ftz attribute
- ARM directly uses the denormal-fp-math attribute
- Other targets indirectly use denormal-fp-math in one DAGCombine
- cl-denorms-are-zero has a corresponding denorms-are-zero attribute
AMDGPU wants a distinct control for f32 flushing from f16/f64, and as
far as I can tell the same is true for NVPTX (based on the attribute
name).
Work on consolidating these into the denormal-fp-math attribute, and a
new type specific denormal-fp-math-f32 variant. Only ARM seems to
support the two different flush modes, so this is overkill for the
other use cases. Ideally we would error on the unsupported
positive-zero mode on other targets from somewhere.
Move the logic for selecting the flush mode into the compiler driver,
instead of handling it in cc1. denormal-fp-math/denormal-fp-math-f32
are now both cc1 flags, but denormal-fp-math-f32 is not yet exposed as
a user flag.
-cl-denorms-are-zero, -fcuda-flush-denormals-to-zero and
-fno-cuda-flush-denormals-to-zero will be mapped to
-fp-denormal-math-f32=ieee or preserve-sign rather than the old
attributes.
Stop emitting the denorms-are-zero attribute for the OpenCL flag. It
has no in-tree users. The meaning would also be target dependent, such
as the AMDGPU choice to treat this as only meaning allow flushing of
f32 and not f16 or f64. The naming is also potentially confusing,
since DAZ in other contexts refers to instructions implicitly treating
input denormals as zero, not necessarily flushing output denormals to
zero.
This also does not attempt to change the behavior for the current
attribute. The LangRef now states that the default is ieee behavior,
but this is inaccurate for the current implementation. The clang
handling is slightly hacky to avoid touching the existing
denormal-fp-math uses. Fixing this will be left for a future patch.
AMDGPU is still using the subtarget feature to control the denormal
mode, but the new attribute are now emitted. A future change will
switch this and remove the subtarget features.
Extend -fxray-instrumentation-bundle to split function-entry and
function-exit into two separate options, so that it is possible to
instrument only function entry or only function exit. For use cases
that only care about one or the other this will save significant overhead
and code size.
Differential Revision: https://reviews.llvm.org/D72890
When LLVM_APPEND_VC_REV=OFF is set, the current git hash is no
longer embedded into binaries (mostly for --version output).
Without it, most binaries need to relink after every single
commit, even if they didn't change otherwise (due to, say,
a documentation-only commit).
LLVM_APPEND_VC_REV is ON by default, so this doesn't change the
default behavior of anything.
With this, all clients of GenerateVersionFromVCS.cmake honor
LLVM_APPEND_VC_REV.
Differential Revision: https://reviews.llvm.org/D72855
$URL$ is an SVN keyword substitution enabled via
`svn propset svn:keywords "URL" tools/clang/lib/Basic/Version.cpp`.
Now that we no longer use SVN, it's no longer being replaced by
anything, and we no longer offer svn exports. So remove the
$URL$-specific logic.
The "cfe" path prefix removal also no longer makes sense now that
we're on git: Both CLANG_REPOSITORY and LLVM_REPOSITORY are usually
set to https://github.com/llvm/llvm-project.git
So remove that too, and remove the "llvm" prefix removal for symmetry.
With the github url, "llvm" _is_ found in the string, but not in
the place the function expected. Nobody noticed since the llvm
repository path is only used if CLANG_REVISION and LLVM_REVISION are
different, which in the git monorepo world they never should be.
(I might remove the "// Support LLVM in a separate repository"
block in a separate commit.)
Differential Revision: https://reviews.llvm.org/D72848
Follow-up of D72014. It is more appropriate to use a target
feature instead of a SubTypeArch to express the difference.
Reviewed By: #powerpc, jhibbits
Differential Revision: https://reviews.llvm.org/D72433
Summary:
This allows the use of '-target powerpcspe-unknown-linux-gnu' or
'powerpcspe-unknown-freebsd' to be used, instead of
'-target powerpc-unknown-linux-gnu -mspe'.
Reviewed By: dim
Differential Revision: https://reviews.llvm.org/D72014
Summary:
Every powerpc64le platform uses elfv2.
For powerpc64, the environments "elfv1" and "elfv2" were added for
FreeBSD ELFv1->ELFv2 migration in D61950. FreeBSD developers have
decided to use OS versions to select ABI, and no one is relying on the
environments.
Also use elfv2 on powerpc64-linux-musl.
Users can always use -mabi=elfv1 and -mabi=elfv2 to override the default
ABI.
Reviewed By: adalava
Differential Revision: https://reviews.llvm.org/D72352
This removes the OpenMPProcBindClauseKind enum in favor of
llvm::omp::ProcBindKind which lives in OpenMPConstants.h and was
introduced in D70109.
No change in behavior is expected.
Reviewed By: JonChesterfield
Differential Revision: https://reviews.llvm.org/D70289
The validateOutputSize and validateInputSize need to check whether
AVX or AVX512 are enabled. But this can be affected by the
target attribute so we need to factor that in.
This patch moves some of the code from CodeGen to create an
appropriate feature map that we can pass to the function.
Differential Revision: https://reviews.llvm.org/D68627
Commit d77ae1552f
("[DebugInfo] Support to emit debugInfo for extern variables")
added deebugInfo for extern variables for BPF target.
The commit is reverted by 891e25b02d
as the committed tests using %clang instead of %clang_cc1 causing
test failed in certain scenarios as reported by Reid Kleckner.
This patch fixed the tests by using %clang_cc1.
Differential Revision: https://reviews.llvm.org/D71818
getLastArgIntValue is a useful utility function to get command line argument as an integer.
Currently it is in Frontend so that it can only be used by clang -cc1. Move it to basic so
that it can also be used by clang driver.
Differential Revision: https://reviews.llvm.org/D71080
In the current implementation of clang the canonicalization of paths in
diagnostic messages (when using -fdiagnostics-absolute-paths) only works
if the symbolic link is in the directory part of the filename, not if
the file itself is a symbolic link to another file.
This patch adds support to canonicalize the complete path including the
file.
Reviewers: rsmith, hans, rnk, ikudrin
Reviewed By: rnk
Differential Revision: https://reviews.llvm.org/D70527
Summary:
This adds parsing of the qualifiers __ptr32, __ptr64, __sptr, and __uptr and
lowers them to the corresponding address space pointer for 32-bit and 64-bit pointers.
(32/64-bit pointers added in https://reviews.llvm.org/D69639)
A large part of this patch is making these pointers ignore the address space
when doing things like overloading and casting.
https://bugs.llvm.org/show_bug.cgi?id=42359
Reviewers: rnk, rsmith
Subscribers: jholewinski, jvesely, nhaehnle, cfe-commits
Tags: #clang
Differential Revision: https://reviews.llvm.org/D71039
Allow sending address spaces into diagnostics to simplify and improve
error reporting. Improved wording of diagnostics for address spaces
in overloading.
Tags: #clang
Differential Revision: https://reviews.llvm.org/D71111
According to OpenMP 5.0, if clause can be used in for simd directive. If
condition in the if clause if false, the non-vectorized version of the
loop must be executed.
Extern variable usage in BPF is different from traditional
pure user space application. Recent discussion in linux bpf
mailing list has two use cases where debug info types are
required to use extern variables:
- extern types are required to have a suitable interface
in libbpf (bpf loader) to provide kernel config parameters
to bpf programs.
https://lore.kernel.org/bpf/CAEf4BzYCNo5GeVGMhp3fhysQ=_axAf=23PtwaZs-yAyafmXC9g@mail.gmail.com/T/#t
- extern types are required so kernel bpf verifier can
verify program which uses external functions more precisely.
This will make later link with actual external function no
need to reverify.
https://lore.kernel.org/bpf/87eez4odqp.fsf@toke.dk/T/#m8d5c3e87ffe7f2764e02d722cb0d8cbc136880ed
This patch added clang support to emit debuginfo for extern variables
with a TargetInfo hook to enable it. The debuginfo for the
extern variable is emitted only if that extern variable is
referenced in the current compilation unit.
Currently, only BPF target enables to generate debug info for
extern variables. The emission of such debuginfo is disabled for C++
at this moment since BPF only supports a subset of C language.
Emission with C++ can be enabled later if an appropriate use case
is identified.
-fstandalone-debug permits us to see more debuginfo with the cost
of bloated binary size. This patch did not add emission of extern
variable debug info with -fstandalone-debug. This can be
re-evaluated if there is a real need.
Differential Revision: https://reviews.llvm.org/D70696
Summary:
The new OpenMPConstants.h is a location for all OpenMP related constants
(and helpers) to live.
This patch moves the directives there (the enum OpenMPDirectiveKind) and
rewires Clang to use the new location.
Initially part of D69785.
Reviewers: kiranchandramohan, ABataev, RaviNarayanaswamy, gtbercea, grokos, sdmitriev, JonChesterfield, hfinkel, fghanim
Subscribers: jholewinski, ppenzin, penzn, llvm-commits, cfe-commits, jfb, guansong, bollu, hiraditya, mgorny
Tags: #clang, #llvm
Differential Revision: https://reviews.llvm.org/D69853
The validateOutputSize and validateInputSize need to check whether
AVX or AVX512 are enabled. But this can be affected by the
target attribute so we need to factor that in.
This patch copies some of the code from CodeGen to create an
appropriate feature map that we can pass to the function. Probably
need some refactoring here to share more code with Codegen. Is
there a good place to do that? Also need to support the cpu_specific
attribute as well.
Differential Revision: https://reviews.llvm.org/D68627
According to OpenMP 5.0, if clause can be used in for simd directive. If
condition in the if clause if false, the non-vectorized version of the
loop must be executed.
Summary:
The patch adds correct value of _MSVC_LANG to match with MSVC++ VS2019 /std:c++latest mode.
Bugzilla - Bug 43965
https://bugs.llvm.org/show_bug.cgi?id=43965
The value for a MS specific macro differs from Microsoft starting with VS2019 in /std:c++latest mode.
-bash-4.2$ cat msvclang.cpp
_MSVC_LANG
-bash-4.2$ cl /std:c++latest -E msvclang.cpp
Microsoft (R) C/C++ Optimizing Compiler Version 19.20.27508.1 for x64
Copyright (C) Microsoft Corporation. All rights reserved.
/std:c++latest is provided as a preview of language features from the latest C++
working draft, and we're eager to hear about bugs and suggestions for improvements.
However, note that these features are provided as-is without support, and subject
to changes or removal as the working draft evolves. See
https://go.microsoft.com/fwlink/?linkid=2045807 for details.
msvclang.cpp
201705L
-bash-4.2$ clang-cl /std:c++latest -E msvclang.cpp
201704L
Reviewers: rnk
Reviewed By: rnk
Differential Revision: https://reviews.llvm.org/D70996
Currently, it is a modified version of the Itanium ABI, with the only
change being that constructors and destructors return 'this'.
Differential Revision: https://reviews.llvm.org/D70575
Summary:
Add support for vcadd_* family of intrinsics. This set of intrinsics is
available in Armv8.3-A.
The fp16 versions require the FP16 extension, which has been available
(opt-in) since Armv8.2-A.
Reviewers: t.p.northover
Reviewed By: t.p.northover
Subscribers: t.p.northover, kristof.beyls, hiraditya, cfe-commits, llvm-commits
Tags: #clang, #llvm
Differential Revision: https://reviews.llvm.org/D70862
Now Clang does not check that features required by built-in functions
are enabled. That causes errors in the backend reported in PR44018.
This patch fixes this bug by checking that required features
are enabled.
This should fix PR44018.
Differential Revision: https://reviews.llvm.org/D70808
We don't have a full sysroot yet, so for now we only include compiler
support and compiler-rt builtins, the rest of the runtimes will get
enabled later.
Differential Revision: https://reviews.llvm.org/D70477
This patch will add -mcpu=future into clang for PowerPC.
A CPU type is required for work that may possibly be enabled for some future
Power CPU. The CPU type future will serve that purpose. This patch introduces
no new functionality. It is an incremental patch on top of which Power PC work
for some future CPU can be done.
Differential Revision: https://reviews.llvm.org/D70262
According to OpenMP 5.0, if clause can be used in for simd directive. If
condition in the if clause if false, the non-vectorized version of the
loop must be executed.
With updates to various LLVM tools that use SpecialCastList.
It was tempting to use RealFileSystem as the default, but that makes it
too easy to accidentally forget passing VFS in clang code.
Summary:
This is a follow-up to 590f279c45, which
moved some of the callers to use VFS.
It turned out more code in Driver calls into real filesystem APIs and
also needs an update.
Reviewers: gribozavr2, kadircet
Reviewed By: kadircet
Subscribers: ormris, mgorny, hiraditya, llvm-commits, jkorous, cfe-commits
Tags: #clang, #llvm
Differential Revision: https://reviews.llvm.org/D70440
According to OpenMP 5.0, if clause can be used in simd directive. If
condition in the if clause if false, the non-vectorized version of the
loop must be executed.
Provides support for using r6-r11 as globally scoped
register variables. This requires a -ffixed-rN flag
in order to reserve rN against general allocation.
If for a given GRV declaration the corresponding flag
is not found, or the the register in question is the
target's FP, we fail with a diagnostic.
Differential Revision: https://reviews.llvm.org/D68862
8548 CPU is GCC's name for the e500v2, so accept this in clang. The
e500v2 doesn't support lwsync, so define __NO_LWSYNC__ for this as well,
as GCC does.
Differential Revision: https://reviews.llvm.org/D67787
As part of an audit of whether all errors are being reported from the
ASTReader, delay err_module_file_conflict if a diagnostic is already in
flight when it is hit. This required plumbing an extra argument through
the delayed diagnostic mechanics in DiagnosticsEngine.
Summary:
When downstream LLVM distributions (like AOSP) set the CLANG_VENDOR
cmake variable, the version string printed by the clang driver looks
like:
$ clang --version
[CLANG_VENDOR] clang version X.X.X ([CLANG_REPOSITORY_STRING] sha) (based on LLVM X.X.X)
Rather than the more standard:
$ clang --version
clang version X.X.X ([CLANG_REPOSITORY_STRING] sha)
Based on feedback the the version string is a little long, the trailing
"(based on LLVM X.X.X)" is redundant and makes less sense after moving
LLVM to the monorepo. And it is only added should vendors set the cmake
variable CLANG_VENDOR. Let's remove it.
Reviewers: jyknight, eli.friedman, rsmith, rjmccall, efriedma
Reviewed By: efriedma
Subscribers: arphaman, efriedma, cfe-commits, srhines
Tags: #clang
Differential Revision: https://reviews.llvm.org/D69925
All SSE capable CPUs have MMX. 3dnow implicitly enables MMX.
We have code that detects if sse is enabled and implicitly enables
MMX unless -mno-mmx is passed. So in most cases we were already
enabling MMX if march passed a CPU that supported SSE.
The exception to this is if you pass -march for a cpu supports SSE
and also pass -mno-sse. We should still enable MMX since its part
of the CPU capability.
Summary:
Review comments on {D68767} asked that this duplicated code in clang-format was moved to one central location that being SourceManager (where it had originally be copied from I assume)
Moved function into static function ContentCache::getInvalidBOM(...) - (closest class to where it was defined before)
Updated clang-format to call this static function
Added unit tests for said new function in BasicTests
Sorry not my normal code area so may have the wrong reviewers. (but your names were on the recent history)
Reviewers: bruno, arphaman, klimek, owenpan, mitchell-stellar, dexonsmith
Reviewed By: owenpan
Subscribers: cfe-commits
Tags: #clang, #clang-format, #clang-tools-extra
Differential Revision: https://reviews.llvm.org/D68914
Summary:
Use a forward declaration of DataLayout instead of including
DataLayout.h in clangs TargetInfo.h. This reduces include
dependencies toward DataLayout.h (and other headers such as
DerivedTypes.h, Type.h that is included by DataLayout.h).
Needed to move implemantation of TargetInfo::resetDataLayout
from TargetInfo.h to TargetInfo.cpp.
Reviewers: rnk
Reviewed By: rnk
Subscribers: jvesely, nhaehnle, cfe-commits, llvm-commits
Tags: #clang
Differential Revision: https://reviews.llvm.org/D69262
llvm-svn: 375438
Added parsing/sema/codegen support for 'parallel master taskloop'
constructs. Some of the clauses, like 'grainsize', 'num_tasks', 'final'
and 'priority' are not supported in full, only constant expressions can
be used currently in these clauses.
llvm-svn: 374791
The recently announced IBM z15 processor implements the architecture
already supported as "arch13" in LLVM. This patch adds support for
"z15" as an alternate architecture name for arch13.
Corrsponding LLVM support was committed as rev. 372435.
llvm-svn: 372436
RISC-V LLVM was only implement small/medlow code model, so it defined
__riscv_cmodel_medlow directly without check.
Now, we have medium/medany code model in RISC-V back-end, it should
define according the actually code model.
Reviewed By: lewis-revill
Differential Revision: https://reviews.llvm.org/D67065
llvm-svn: 372078
r371875 moved some functionality around to a Basic header file, but
didn't move its definitions as well. This patch moves some things
around so that shared library building can work.
llvm-svn: 371985
A number of inline assembly constraints are currently supported by LLVM, but rejected as invalid by Clang:
Target independent constraints:
s: An integer constant, but allowing only relocatable values
ARM specific constraints:
j: An immediate integer between 0 and 65535 (valid for MOVW)
x: A 32, 64, or 128-bit floating-point/SIMD register: s0-s15, d0-d7, or q0-q3
N: An immediate integer between 0 and 31 (Thumb1 only)
O: An immediate integer which is a multiple of 4 between -508 and 508. (Thumb1 only)
This patch adds support to Clang for the missing constraints along with some checks to ensure that the constraints are used with the correct target and Thumb mode, and that immediates are within valid ranges (at least where possible). The constraints are already implemented in LLVM, but just a couple of minor corrections to checks (V8M Baseline includes MOVW so should work with 'j', 'N' and 'O' shouldn't be valid in Thumb2) so that Clang and LLVM are in line with each other and the documentation.
Differential Revision: https://reviews.llvm.org/D65863
Change-Id: I18076619e319bac35fbb60f590c069145c9d9a0a
llvm-svn: 371079
Summary:
r337347 added support for the Signal Processing Engine (SPE) to LLVM.
This follows that up with the clang side.
This adds -mspe and -mno-spe, to match GCC.
Subscribers: nemanjai, kbarton, cfe-commits
Differential Revision: https://reviews.llvm.org/D49754
llvm-svn: 371066
Summary:
GCC seperates the `__riscv_float_abi_*` macros and the
`__riscv_abi_rve` macro. If the chosen abi is ilp32e, `gcc -march=rv32i
-mabi=ilp32i -E -dM` shows that both `__riscv_float_abi_soft` and
`__riscv_abi_rve` are set.
This patch corrects the compiler logic around these defines.
At the moment, this patch will not change clang's behaviour, because we do not
accept the `ilp32e` abi yet.
Reviewers: luismarques, asb
Reviewed By: luismarques
Subscribers: rbar, johnrusso, simoncook, apazos, sabuasal, niosHD, kito-cheng, shiva0217, jrtc27, MaskRay, zzheng, edward-jones, rogfer01, MartinMosbeck, brucehoult, the_o, rkruppe, PkmX, jocewei, psnobl, benna, Jim, s.egerton, pzheng, cfe-commits
Tags: #clang
Differential Revision: https://reviews.llvm.org/D66591
llvm-svn: 370709
accessed name to the directory entry
This commit introduces a parallel API that returns a DirectoryEntryRef
to the FileManager, similar to the parallel FileEntryRef API. All
uses will have to be update in follow-up patches. The immediate use of the new API in this
patch fixes the issue where a file manager was reused in clang-scan-deps,
but reported an different file path whenever a framework lookup was done through a symlink.
Differential Revision: https://reviews.llvm.org/D67026
llvm-svn: 370562
If contents of a file that is part of a PCM are overridden when reading
it, but weren't overridden when the PCM was being built, the ASTReader
will emit an error. Now it creates a separate FileEntry for recovery,
bypassing the overridden content instead of discarding it. The
pre-existing testcase clang/test/PCH/remap-file-from-pch.cpp confirms
that the new recovery method works correctly.
This resolves a long-standing FIXME to avoid hypothetically invalidating
another precompiled module that's already using the overridden contents.
This also removes ContentCache-related API that would be unsafe to use
across `CompilerInstance`s in an implicit modules build. This helps to
unblock us sinking it from SourceManager into FileManager in the future,
which would allow us to delete `InMemoryModuleCache`.
https://reviews.llvm.org/D66710
llvm-svn: 370546
-Deprecate -mmpx and -mno-mpx command line options
-Remove CPUID detection of mpx for -march=native
-Remove MPX from all CPUs
-Remove MPX preprocessor define
I've left the "mpx" string in the backend so we don't fail on old IR, but its not connected to anything.
gcc has also deprecated these command line options. https://www.phoronix.com/scan.php?page=news_item&px=GCC-Patch-To-Drop-MPX
Differential Revision: https://reviews.llvm.org/D66669
llvm-svn: 370393
Summary: This ensures that libcalls aren't generated when the target supports atomics. Atomics aren't in the base RV32I/RV64I instruction sets, so MaxAtomicInlineWidth and MaxAtomicPromoteWidth are set only when the atomics extension is being targeted. This must be done in setMaxAtomicWidth, as this should be done after handleTargetFeatures has been called.
Reviewers: jfb, jyknight, wmi, asb
Reviewed By: asb
Subscribers: pzheng, MaskRay, s.egerton, lenary, dexonsmith, psnobl, benna, Jim, JohnLLVM, rbar, johnrusso, simoncook, apazos, sabuasal, niosHD, kito-cheng, shiva0217, jrtc27, zzheng, edward-jones, rogfer01, MartinMosbeck, brucehoult, the_o, rkruppe, PkmX, jocewei, lewis-revill, cfe-commits
Tags: #clang
Differential Revision: https://reviews.llvm.org/D57450
llvm-svn: 370073
Refactor ContentCache::IsSystemFile to IsFileVolatile, checking
SourceManager::userFilesAreVolatile at construction time. This is a
step toward lowering ContentCache down from SourceManager to
FileManager.
No functionality change intended.
https://reviews.llvm.org/D66713
llvm-svn: 369958
`FileManager::getFileRef` is a modern API which we expect to convert to
over time. We should modernize the error handling as well, using
`llvm::Expected` instead of `llvm::ErrorOr`, to help clients that care
about errors to ensure nothing is missed.
However, not all clients care. I've also added another path for those
that don't:
- `FileEntryRef` is now copy- and move-assignable (using a pointer
instead of a reference).
- `FileManager::getOptionalFileRef` returns an `llvm::Optional` instead
of `llvm::Expected`.
- Added an `llvm::expectedToOptional` utility in case this is useful
elsewhere.
https://reviews.llvm.org/D66705
llvm-svn: 369943
Summary:
Clang performs various recursive operations (such as template instantiation),
and may use non-trivial amounts of stack space in each recursive step (for
instance, due to recursive AST walks). While we try to keep the stack space
used by such steps to a minimum and we have explicit limits on the number of
such steps we perform, it's impractical to guarantee that we won't blow out the
stack on deeply recursive template instantiations on complex ASTs, even with
only a moderately high instantiation depth limit.
The user experience in these cases is generally terrible: we crash with
no hint of what went wrong. Under this patch, we attempt to do better:
* Detect when the stack is nearly exhausted, and produce a warning with a
nice template instantiation backtrace, telling the user that we might
run slowly or crash.
* For cases where we're forced to trigger recursive template
instantiation in arbitrarily-deeply-nested contexts, check whether
we're nearly out of stack space and allocate a new stack (by spawning
a new thread) after producing the warning.
Reviewers: rnk, aaron.ballman
Subscribers: mgorny, cfe-commits
Tags: #clang
Differential Revision: https://reviews.llvm.org/D66361
llvm-svn: 369940
construct.
OpenMP 5.0 introduced new clause for declare target directive, device_type clause, which may accept values host, nohost, and any. Host means
that the function must be emitted only for the host, nohost - only for
the device, and any - for both, device and the host.
llvm-svn: 369775
when the FileManager is reused across invocations
This commit introduces a parallel API to FileManager's getFile: getFileEntryRef, which returns
a reference to the FileEntry, and the name that was used to access the file. In the case of
a VFS with 'use-external-names', the FileEntyRef contains the external name of the file,
not the filename that was used to access it.
The new API is adopted only in the HeaderSearch and Preprocessor for include file lookup, so that the
accessed path can be propagated to SourceManager's FileInfo. SourceManager's FileInfo now can report this accessed path, using
the new getName method. This API is then adopted in the dependency collector, which now correctly reports dependencies when a file
is included both using a symlink and a real path in the case when the FileManager is reused across multiple Preprocessor invocations.
Note that this patch does not fix all dependency collector issues, as the same problem is still present in other cases when dependencies
are obtained using FileSkipped, InclusionDirective, and HasInclude. This will be fixed in follow-up commits.
Differential Revision: https://reviews.llvm.org/D65907
llvm-svn: 369680
I noticed that SourceManager::translateFile has code that doesn't really make sense.
In particular, if it fails to find a FileID by comparing FileEntry * values, it tries to
look through files that have the same filename, to see if they have a matching inode to try to
find the right FileID. However, the inode comparison seem redundant, as Clang's FileManager
already deduplicates FileEntry * values by inode.
Thus the comparisons between inodes should never actually succeed, and the comparison between FileEntry * values should be sufficient here.
Differential Revision: https://reviews.llvm.org/D65481
llvm-svn: 369585
Michael Liao