If we know that the abs operand is known negative, we can replace
it with a neg.
To avoid computing known bits twice, I've removed the fold for the
non-negative case from InstSimplify. Both the non-negative and the
negative case are handled by InstCombine now, with one known bits call.
Differential Revision: https://reviews.llvm.org/D87196
log:
BB [7, 8): begin {}, end {}, livein {}, liveout {}
BB [1, 2): begin {}, end {}, livein {}, liveout {}
...
But it is not convenient to know what the basic block is.
So I add the basic block name to it.
Reviewed By: vitalybuka
TestPlan: check-llvm
Differential Revision: https://reviews.llvm.org/D87152
This addresses the remaining issue from D87188. Due to a series of
folds, we may end up with abs-of-abs represented as
x == 0 ? -abs(x) : abs(x). Rather than recognizing this as a special
abs pattern and doing an abs-of-abs fold on it afterwards,
I'm directly folding this to one of the select operands in InstSimplify.
The general pattern falls into the "select with operand replaced"
category, but that fold is not powerful enough to recognize that
both hands of the select are the same for value zero.
Differential Revision: https://reviews.llvm.org/D87197
This adjusts the description of `llvm.memcpy` to also allow operands
to be equal. This is in line with what Clang currently expects.
This change is intended to be temporary and followed by re-introduce
a variant with the non-overlapping guarantee for cases where we can
actually ensure that property in the front-end.
See the links below for more details:
http://lists.llvm.org/pipermail/cfe-dev/2020-August/066614.html
and PR11763.
Reviewed By: nikic
Differential Revision: https://reviews.llvm.org/D86815
Recognize umin/umax/smin/smax intrinsics and convert them to the
already existing SCEV nodes of the same name.
In the future we'll want SCEVExpander to also produce the intrinsics,
but we're not ready for that yet.
Differential Revision: https://reviews.llvm.org/D87160
If we have a dominating condition that x >= y, then umax(x, y) is x,
etc. I'm doing this in InstSimplify as the corresponding transform
for the select form is also done there.
Differential Revision: https://reviews.llvm.org/D87168
This also changes -lint from an analysis to a pass. It's similar to
-verify, and that is a normal pass, and lives in llvm/IR.
Reviewed By: ychen
Differential Revision: https://reviews.llvm.org/D87057
This also changes -lint from an analysis to a pass. It's similar to
-verify, and that is a normal pass, and lives in llvm/IR.
Reviewed By: ychen
Differential Revision: https://reviews.llvm.org/D87057
This helps SelectionDAGBuilder recognize the splat can be used as a uniform base.
Reviewed By: RKSimon
Differential Revision: https://reviews.llvm.org/D86371
This patch adds an initial, incomeplete and unsound implementation of
canReplacePointersIfEqual to check if a pointer value A can be replaced
by another pointer value B, that are deemed to be equivalent through
some means (e.g. information from conditions).
Note that is in general not sound to blindly replace pointers based on
equality, for example if they are based on different underlying objects.
LLVM's memory model is not completely settled as of now; see
https://bugs.llvm.org/show_bug.cgi?id=34548 for a more detailed
discussion.
The initial version of canReplacePointersIfEqual only rejects a very
specific case: replacing a pointer with a constant expression that is
not dereferenceable. Such a replacement is problematic and can be
restricted relatively easily without impacting most code. Using it to
limit replacements in GVN/SCCP/CVP only results in small differences in
7 programs out of MultiSource/SPEC2000/SPEC2006 on X86 with -O3 -flto.
This patch is supposed to be an initial step to improve the current
situation and the helper should be made stricter in the future. But this
will require careful analysis of the impact on performance.
Reviewed By: aqjune
Differential Revision: https://reviews.llvm.org/D85524
MemoryPhis with a single value are correct, but can lead to errors when
updating. Clean up single entry Phis newly added when cloning blocks.
Resolves PR46574.
Replace the check for poison-producing instructions in
SimplifyWithOpReplaced() with the generic helper canCreatePoison()
that properly handles poisonous shifts and thus avoids the problem
from PR47322.
This additionally fixes a bug in IIQ.UseInstrInfo=false mode, which
previously could have caused this code to ignore poison flags.
Setting UseInstrInfo=false should reduce the possible optimizations,
not increase them.
This is not a full solution to the problem, as poison could be
introduced more indirectly. This is just a minimal, easy to backport
fix.
Differential Revision: https://reviews.llvm.org/D86834
This got reverted because a dependency was reverted. It has since
been reapplied, so reapply this as well.
-----
Related to D69686. As noted there, LVI currently behaves differently
for integer and pointer values: For integers, the block value is always
valid inside the basic block, while for pointers it is only valid at
the end of the basic block. I believe the integer behavior is the
correct one, and CVP relies on it via its getConstantRange() uses.
The reason for the special pointer behavior is that LVI checks whether
a pointer is dereferenced in a given basic block and marks it as
non-null in that case. Of course, this information is valid only after
the dereferencing instruction, or in conservative approximation,
at the end of the block.
This patch changes the treatment of dereferencability: Instead of
including it inside the block value, we instead treat it as something
similar to an assume (it essentially is a non-nullness assume) and
incorporate this information in intersectAssumeOrGuardBlockValueConstantRange()
if the context instruction is the terminator of the basic block.
This happens either when determining an edge-value internally in LVI,
or when a terminator was explicitly passed to getValueAt(). The latter
case makes this more powerful than the previous implementation as
a side-effect, and this does actually seem benefitial in practice.
Of course, we do not want to recompute dereferencability on each
intersectAssume call, so we need a new cache for this. The
dereferencability analysis requires walking the entire basic block
and computing underlying objects of all memory operands. This was
previously done separately for each queried pointer value. In the
new implementation (both because this makes the caching simpler,
and because it is faster), I instead only walk the full BB once and
cache all the dereferenced pointers. So the traversal is now performed
only once per BB, instead of once per queried pointer value.
I think the overall model now makes more sense than before, and there
will be no more pitfalls due to differing integer/pointer behavior.
Differential Revision: https://reviews.llvm.org/D69914
This patch changes ElementCount so that the Min and Scalable
members are now private and can only be accessed via the get
functions getKnownMinValue() and isScalable(). In addition I've
added some other member functions for more commonly used operations.
Hopefully this makes the class more useful and will reduce the
need for calling getKnownMinValue().
Differential Revision: https://reviews.llvm.org/D86065
This patch adds support for memcmp in MemoryLocation::getForArgument.
memcmp reads from the first 2 arguments up to the number of bytes of the
third argument.
Reviewed By: efriedma
Differential Revision: https://reviews.llvm.org/D86725
For StackLifetime after finding alloca we need to check that
values ponting to the begining of alloca.
Reviewed By: eugenis
Differential Revision: https://reviews.llvm.org/D86692
As pointed out in post-commit review, this can legally be called
on instructions that are not inserted into basic blocks,
so don't blindly assume that there is basic block.
Apparently, we don't do this, neither in EarlyCSE, nor in InstSimplify,
nor in (old) GVN, but do in NewGVN and SimplifyCFG of all places..
While i could teach EarlyCSE how to hash PHI nodes,
we can't really do much (anything?) even if we find two identical
PHI nodes in different basic blocks, same-BB case is the interesting one,
and if we teach InstSimplify about it (which is what i wanted originally,
https://reviews.llvm.org/D86530), we get EarlyCSE support for free.
So i would think this is pretty uncontroversial.
On vanilla llvm test-suite + RawSpeed, this has the following effects:
```
| statistic name | baseline | proposed | Δ | % | \|%\| |
|----------------------------------------------------|-----------|-----------|-------:|---------:|---------:|
| instsimplify.NumPHICSE | 0 | 23779 | 23779 | 0.00% | 0.00% |
| asm-printer.EmittedInsts | 7942328 | 7942392 | 64 | 0.00% | 0.00% |
| assembler.ObjectBytes | 273069192 | 273084704 | 15512 | 0.01% | 0.01% |
| correlated-value-propagation.NumPhis | 18412 | 18539 | 127 | 0.69% | 0.69% |
| early-cse.NumCSE | 2183283 | 2183227 | -56 | 0.00% | 0.00% |
| early-cse.NumSimplify | 550105 | 542090 | -8015 | -1.46% | 1.46% |
| instcombine.NumAggregateReconstructionsSimplified | 73 | 4506 | 4433 | 6072.60% | 6072.60% |
| instcombine.NumCombined | 3640264 | 3664769 | 24505 | 0.67% | 0.67% |
| instcombine.NumDeadInst | 1778193 | 1783183 | 4990 | 0.28% | 0.28% |
| instcount.NumCallInst | 1758401 | 1758799 | 398 | 0.02% | 0.02% |
| instcount.NumInvokeInst | 59478 | 59502 | 24 | 0.04% | 0.04% |
| instcount.NumPHIInst | 330557 | 330533 | -24 | -0.01% | 0.01% |
| instcount.TotalInsts | 8831952 | 8832286 | 334 | 0.00% | 0.00% |
| simplifycfg.NumInvokes | 4300 | 4410 | 110 | 2.56% | 2.56% |
| simplifycfg.NumSimpl | 1019808 | 999607 | -20201 | -1.98% | 1.98% |
```
I.e. it fires ~24k times, causes +110 (+2.56%) more `invoke` -> `call`
transforms, and counter-intuitively results in *more* instructions total.
That being said, the PHI count doesn't decrease that much,
and looking at some examples, it seems at least some of them
were previously getting PHI CSE'd in SimplifyCFG of all places..
I'm adjusting `Instruction::isIdenticalToWhenDefined()` at the same time.
As a comment in `InstCombinerImpl::visitPHINode()` already stated,
there are no guarantees on the ordering of the operands of a PHI node,
so if we just naively compare them, we may false-negatively say that
the nodes are not equal when the only difference is operand order,
which is especially important since the fold is in InstSimplify,
so we can't rely on InstCombine sorting them beforehand.
Fixing this for the general case is costly (geomean +0.02%),
and does not appear to catch anything in test-suite, but for
the same-BB case, it's trivial, so let's fix at least that.
As per http://llvm-compile-time-tracker.com/compare.php?from=04879086b44348cad600a0a1ccbe1f7776cc3cf9&to=82bdedb888b945df1e9f130dd3ac4dd3c96e2925&stat=instructions
this appears to cause geomean +0.03% compile time increase (regression),
but geomean -0.01%..-0.04% code size decrease (improvement).
This is a reboot of D84655, now performing the inner icmp
simplification query without undef folds.
It should be possible to handle the current foldMinMaxSharedOp()
fold based on this, by moving the logic into icmp of min/max instead,
making it more general. We can't drop the folds for constant operands,
because those also allow undef, which we exclude here.
The tests use assumes for exhaustive coverage, and have a few
more examples of misc folds we get based on icmp simplification.
Differential Revision: https://reviews.llvm.org/D85929
InstSimplify should do all transformations that ConstProp does, but
one thing that ConstProp does that InstSimplify wouldn't is inline
vector instructions that are constants, e.g. into a ret.
Previously vector instructions wouldn't be inlined in InstSimplify
because llvm::Simplify*Instruction() would return nullptr for specific
instructions, such as vector instructions that were actually constants,
if it couldn't simplify them.
This changes SimplifyInsertElementInst, SimplifyExtractElementInst, and
SimplifyShuffleVectorInst to return a vector constant when possible.
Reviewed By: efriedma
Differential Revision: https://reviews.llvm.org/D85946
This patch adds NoUndef to Intrinsics.td.
The attribute is attached to llvm.assume's operand, because llvm.assume(undef)
is UB.
It is attached to pointer operands of several memory accessing intrinsics
as well.
This change makes ValueTracking::getGuaranteedNonPoisonOps' intrinsic check
unnecessary, so it is removed.
Reviewed By: jdoerfert
Differential Revision: https://reviews.llvm.org/D86576
We only need the C++ type and the corresponding TF Enum. The other
parameter was used for the output spec json file, but we can just
standardize on the C++ type name there.
Differential Revision: https://reviews.llvm.org/D86549
This patch helps getGuaranteedNonPoisonOp find multiple non-poison operands.
Instead of special-casing llvm.assume, I think it is also a viable option to
add noundef to Intrinsics.td. If it makes sense, I'll make a patch for that.
Reviewed By: jdoerfert
Differential Revision: https://reviews.llvm.org/D86477
We're not changing IR while running a single MemDep query, so it's
safe to cache alias analysis results using BatchAA. This adds BatchAA
usage to getSimplePointerDependencyFrom(), which is non-intrusive --
covering larger parts (like a whole processNonLocalLoad query) is
also possible, but requires threading BatchAA through a bunch of APIs.
For the ThinLTO configuration, this is a 1% geomean improvement on CTMark.
Differential Revision: https://reviews.llvm.org/D85583
Summary: The LCSSA pass (required for all loop passes) sometimes adds
additional blocks containing LCSSA variables, and checkLoopsStructure
may return false even when the loops are perfectly nested in this case.
This is because the successor of the exit block of the inner loop now
points to the LCSSA block instead of the latch block of the outer loop.
Examples are shown in the test nests-with-lcssa.ll.
To fix the issue, the successor of the exit block of the inner loop can
now point to a block in which all instructions are LCSSA phi node
(except the terminator), and the sole successor of that block should
point to the latch block of the outer loop.
Reviewed By: Whitney, etiotto
Differential Revision: https://reviews.llvm.org/D86133
If we use training algorithms that don't need partial rewards, we don't
need to worry about an ir2native model. In that case, training logs
won't contain a 'delta_size' feature either (since that's the partial
reward).
Differential Revision: https://reviews.llvm.org/D86481
Extend the `applyUpdates` in DominatorTree to allow a post CFG view,
different from the current CFG.
This patch implements the functionality of updating an already up to
date DT, to the desired PostCFGView.
Combining a set of updates towards an up to date DT and a PostCFGView is
not yet supported.
Differential Revision: https://reviews.llvm.org/D85472
The legacy PM alias analysis pipeline by default includes basic-aa.
When running `opt -foo-pass` under the NPM and -disable-basic-aa is not
specified, use basic-aa.
This decreases the number of check-llvm failures under NPM from 913 to 752.
Reviewed By: ychen, asbirlea
Differential Revision: https://reviews.llvm.org/D86167
Max Kazantsev