Because we're potentially peeking through a bitcast in this transform,
we need to use overall bitwidths rather than number of elements to
determine when it's safe to proceed.
Should fix:
https://bugs.llvm.org/show_bug.cgi?id=39893
llvm-svn: 348383
This is an initial patch to add a minimum level of support for funnel shifts to the SelectionDAG and to begin wiring it up to the X86 SHLD/SHRD instructions.
Some partial legalization code has been added to handle the case for 'SlowSHLD' where we want to expand instead and I've added a few DAG combines so we don't get regressions from the existing DAG builder expansion code.
Differential Revision: https://reviews.llvm.org/D54698
llvm-svn: 348353
Add support for ISD::*_EXTEND and ISD::*_EXTEND_VECTOR_INREG opcodes.
The extra broadcast in trunc-subvector.ll will be fixed in an upcoming patch.
llvm-svn: 348246
This is the smallest vector enhancement I could find to D54640.
Here, we're allowing narrowing to only legal vector ops because we'll see
regressions without that. All of the test diffs are wins from what I can tell.
With AVX/AVX512, we can shrink ymm/zmm ops to xmm.
x86 vector multiplies are the problem case that we're avoiding due to the
patchwork ISA, and it's not clear to me if we can dance around those
regressions using TLI hooks or if we need preliminary patches to plug those
holes.
Differential Revision: https://reviews.llvm.org/D55126
llvm-svn: 348195
Summary:
Under -x86-experimental-vector-widening-legalization, fp_to_uint/fp_to_sint with a smaller than 128 bit vector type results are custom type legalized by promoting the result to a 128 bit vector by promoting the elements, inserting an assertzext/assertsext, then truncating back to original type. The truncate will be further legalizdd to a pack shuffle. In the case of a v8i8 result type, we'll end up with a v8i16 fp_to_sint. This will need to be further legalized during vector op legalization by promoting to v8i32 and then truncating again. Under avx2 this produces good code with two pack instructions, but Under avx512 this will result in a truncate instruction and a packuswb instruction. But we should be able to get away with a single truncate instruction.
The other option is to promote all the way to vXi32 result type during the first type legalization. But in some experimentation that seemed to require more work to produce good code for other configurations.
Reviewers: RKSimon, spatel
Reviewed By: RKSimon
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D54836
llvm-svn: 348158
This change prevents the crash noted in the post-commit comments
for rL347478 :
http://lists.llvm.org/pipermail/llvm-commits/Week-of-Mon-20181119/605166.html
We can't guarantee that an oversized shift amount is folded away,
so we have to check for it.
Note that I committed an incomplete fix for that crash with:
rL347502
But as discussed here:
http://lists.llvm.org/pipermail/llvm-commits/Week-of-Mon-20181126/605679.html
...we have to try harder.
So I'm not sure how to expose the bug now (and apparently no fuzzers have found
a way yet either).
On the plus side, we have discovered that we're missing real optimizations by
not simplifying nodes sooner, so the earlier fix still has value, and there's
likely more value in extending that so we can simplify more opcodes and simplify
when doing RAUW and/or putting nodes on the combiner worklist.
Differential Revision: https://reviews.llvm.org/D54954
llvm-svn: 348089
The motivating case for this is shown in:
https://bugs.llvm.org/show_bug.cgi?id=32023
and the corresponding rot16.ll regression tests.
Because x86 scalar shift amounts are i8 values, we can end up with trunc-binop-trunc
sequences that don't get folded in IR.
As the TODO comments suggest, there will be regressions if we extend this (for x86,
we mostly seem to be missing LEA opportunities, but there are likely vector folds
missing too). I think those should be considered existing bugs because this is the
same transform that we do as an IR canonicalization in instcombine. We just need
more tests to make those visible independent of this patch.
Differential Revision: https://reviews.llvm.org/D54640
llvm-svn: 347917
This should likely be adjusted to limit this transform
further, but these diffs should be clear wins.
If we have blendv/conditional move, then we should assume
those are cheap ops. The loads become independent of the
compare, so those can be speculated before we need to use
the values in the blend/mov.
llvm-svn: 347526
rL347502 moved the null sibling, so we should group all of these
together. I'm not sure why these aren't methods of the SDValue
class itself, but that's another patch if that's possible.
llvm-svn: 347523
...and use them to avoid creating obviously undef values as
discussed in the post-commit thread for r347478.
The diffs in vector div/rem show that we were missing real
optimizations by creating bogus shift nodes.
llvm-svn: 347502
We fail to canonicalize IR this way (prefer 'not' ops to arbitrary 'xor'),
but that would not matter without this patch because DAGCombiner was
reversing that transform. I think we need this transform in the backend
regardless of what happens in IR to catch cases where the shift-xor
is formed late from GEP or other ops.
https://rise4fun.com/Alive/NC1
Name: shl
Pre: (-1 << C2) == C1
%shl = shl i8 %x, C2
%r = xor i8 %shl, C1
=>
%not = xor i8 %x, -1
%r = shl i8 %not, C2
Name: shr
Pre: (-1 u>> C2) == C1
%sh = lshr i8 %x, C2
%r = xor i8 %sh, C1
=>
%not = xor i8 %x, -1
%r = lshr i8 %not, C2
https://bugs.llvm.org/show_bug.cgi?id=39657
llvm-svn: 347478
This transform needs to be limited.
We are converting to a constant pool load very early, and we
are turning loads that are independent of the select condition
(and therefore speculatable) into a dependent non-speculatable
load.
We may also be transferring a condition code from an FP register
to integer to create that dependent load.
llvm-svn: 347424
This is another step in vector narrowing - a follow-up to D53784
(and hoping to eventually squash potential regressions seen in
D51553).
The x86 test diffs are wins, but the AArch64 diff is probably not.
That problem already exists independent of this patch (see PR39722), but it
went unnoticed in the previous patch because there were no regression tests
that showed the possibility.
The x86 diff in i64-mem-copy.ll is close. Given the frequency throttling
concerns with using wider vector ops, an extra extract to reduce vector
width is the right trade-off at this level of codegen.
Differential Revision: https://reviews.llvm.org/D54392
llvm-svn: 347356
This uncovered an off-by-one typo in SimplifyDemandedVectorElts's INSERT_SUBVECTOR handling as its bounds check was bailing on safe indices.
llvm-svn: 347313
Consistently use (!LegalOperations || isOperationLegalOrCustom) for all node pairs.
Differential Revision: https://reviews.llvm.org/D53478
llvm-svn: 347255
Sadly, this duplicates (twice) the logic from InstSimplify. There
might be some way to at least share the DAG versions of the code,
but copying the folds seems to be the standard method to ensure
that we don't miss these folds.
Unlike in IR, we don't run DAGCombiner to fixpoint, so there's no
way to ensure that we do these kinds of simplifications unless the
code is repeated at node creation time and during combines.
There were other tests that would become worthless with this
improvement that I changed as pre-commits:
rL347161
rL347164
rL347165
rL347166
rL347167
I'm not sure how to salvage the remaining tests (diffs in this patch).
So the x86 tests verify that the new code is working as intended.
The AMDGPU test is actually similar to my motivating case: we have
some undef value that has survived to machine IR in an x86 test, and
then it gets folded in some weird way, or we crash if we don't transfer
the undef flag. But we would have been better off never getting to that
point by doing these simplifications.
This will lead back to PR32023 someday...
https://bugs.llvm.org/show_bug.cgi?id=32023
llvm-svn: 347170
It should be ok to create a new build_vector after legal operations so long as it doesn't cause an infinite loop in DAG combiner.
Unfortunately, X86's custom constant folding in combineVSZext is hiding any test changes from this. But I'm trying to get to a point where that X86 specific code isn't necessary at all.
Differential Revision: https://reviews.llvm.org/D54285
llvm-svn: 346728
Summary:
Handle extra output from index loads in cases where we wish to
forward a load value directly from a preceeding store.
Fixes PR39571.
Reviewers: peter.smith, rengolin
Subscribers: javed.absar, hiraditya, arphaman, llvm-commits
Differential Revision: https://reviews.llvm.org/D54265
llvm-svn: 346654
This is a long-awaited follow-up suggested in D33578. Since then, we've picked up even more
opportunities for vector narrowing from changes like D53784, so there are a lot of test diffs.
Apart from 2-3 strange cases, these are all wins.
I've structured this to be no-functional-change-intended for any target except for x86
because I couldn't tell if AArch64, ARM, and AMDGPU would improve or not. All of those
targets have existing regression tests (4, 4, 10 files respectively) that would be
affected. Also, Hexagon overrides the shouldReduceLoadWidth() hook, but doesn't show
any regression test diffs. The trade-off is deciding if an extra vector load is better
than a single wide load + extract_subvector.
For x86, this is almost always better (on paper at least) because we often can fold
loads into subsequent ops and not increase the official instruction count. There's also
some unknown -- but potentially large -- benefit from using narrower vector ops if wide
ops are implemented with multiple uops and/or frequency throttling is avoided.
Differential Revision: https://reviews.llvm.org/D54073
llvm-svn: 346595
It's possible for vector op legalization to generate a shuffle. If that happens we should give a chance for DAG combine to combine that with a build_vector input.
I also fixed a bug in combineShuffleOfScalars that was considering the number of uses on a undef input to a shuffle. We don't care how many times undef is used.
Differential Revision: https://reviews.llvm.org/D54283
llvm-svn: 346530
The DAGCombiner tries to SimplifySelectCC as follows:
select_cc(x, y, 16, 0, cc) -> shl(zext(set_cc(x, y, cc)), 4)
It can't cope with the situation of reordered operands:
select_cc(x, y, 0, 16, cc)
In that case we just need to swap the operands and invert the Condition Code:
select_cc(x, y, 16, 0, ~cc)
Differential Revision: https://reviews.llvm.org/D53236
llvm-svn: 346484
FindBetterNeighborChains simulateanously improves the chain
dependencies of a chain of related stores avoiding the generation of
extra token factors. For chains longer than the GatherAllAliasDepths,
stores further down in the chain will necessarily fail, a potentially
significant waste and preventing otherwise trivial parallelization.
This patch directly parallelize the chains of stores before improving
each store. This generally improves DAG-level parallelism.
Reviewers: courbet, spatel, RKSimon, bogner, efriedma, craig.topper, rnk
Subscribers: sdardis, javed.absar, hiraditya, jrtc27, atanasyan, llvm-commits
Differential Revision: https://reviews.llvm.org/D53552
llvm-svn: 346432
The original code avoided creating a zero vector after type legalization, but if we're after type legalization the type we have is legal. The real hazard we need to avoid is creating a build vector after op legalization. tryFoldToZero takes care of checking for this.
llvm-svn: 346119
These methods were just wrappers around getNode with additional asserts (identical and repeated 3 times). But getNode already has a switch that can be used to hold these asserts that allows them to be shared for all 3 opcodes. This also enables checking on the places that create these nodes without using the wrappers.
The rest of the patch is just changing all callers to use getNode directly.
llvm-svn: 346087
We already have custom lowering for the AVX case in LegalizeVectorOps. So its better to keep the regular extend op around as long as possible.
I had to qualify one place in DAG combine that created illegal vector extending load operations. This change by itself had no effect on any tests which is why its included here.
I've made a few cleanups to the custom lowering. The sign extend code no longer creates an identity shuffle with undef elements. The zero extend code now emits a zero_extend_vector_inreg instead of an unpckl with a zero vector.
For the high half of the custom lowering of zero_extend/any_extend, we're now using an unpckh with a zero vector or undef. Previously we used used a pshufd to move the upper 64-bits to the lower 64-bits and then used a zero_extend_vector_inreg. I think the zero vector should require less execution resources and be smaller code size.
Differential Revision: https://reviews.llvm.org/D54024
llvm-svn: 346043
reduceBuildVecConvertToConvertBuildVec vectorizes int2float in the DAGCombiner, which means that even if the LV/SLP has decided to keep scalar code using the cost models, this will override this.
While there are cases where vectorization is necessary in the DAG (mainly due to legalization artefacts), I don't think this is the case here, we should assume that the vectorizers know what they are doing.
Differential Revision: https://reviews.llvm.org/D53712
llvm-svn: 345964
I'm having trouble creating a test case for the ISD::TRUNCATE part of this that shows any codegen differences. But I was able to test the setcc path which is what the test changes here cover.
llvm-svn: 345908
The test causes a crash because we were trying to extract v4f32 to v3f32, and the
narrowing factor was then 4/3 = 1 producing a bogus narrow type.
This should fix:
https://bugs.llvm.org/show_bug.cgi?id=39511
llvm-svn: 345842
Summary:
Normalize the offset for endianess before checking
if the store cover the load in ForwardStoreValueToDirectLoad.
Without this we missed out on some optimizations for big
endian targets. If for example having a 4 bytes store followed
by a 1 byte load, loading the least significant byte from the
store, the STCoversLD check would fail (see @test4 in
test/CodeGen/AArch64/load-store-forwarding.ll).
This patch also fixes a problem seen in an out-of-tree target.
The target has i40 as a legal type, it is big endian,
and the StoreSize for i40 is 48 bits. So when normalizing
the offset for endianess we need to take the StoreSize into
account (assuming that padding added when storing into
a larger StoreSize always is added at the most significant
end).
Reviewers: niravd
Reviewed By: niravd
Subscribers: javed.absar, kristof.beyls, llvm-commits, uabelho
Differential Revision: https://reviews.llvm.org/D53776
llvm-svn: 345636
Narrowing vector binops came up in the demanded bits discussion in D52912.
I don't think we're going to be able to do this transform in IR as a canonicalization
because of the risk of creating unsupported widths for vector ops, but we already have
a DAG TLI hook to allow what I was hoping for: isExtractSubvectorCheap(). This is
currently enabled for x86, ARM, and AArch64 (although only x86 has existing regression
test diffs).
This is artificially limited to not look through bitcasts because there are so many
test diffs already, but that's marked with a TODO and is a small follow-up.
Differential Revision: https://reviews.llvm.org/D53784
llvm-svn: 345602
Summary:
Changes all uses of minnan/maxnan to minimum/maximum
globally. These names emphasize that the semantic difference between
these operations is more than just NaN-propagation.
Reviewers: arsenm, aheejin, dschuff, javed.absar
Subscribers: jholewinski, sdardis, wdng, sbc100, jgravelle-google, jrtc27, atanasyan, llvm-commits
Differential Revision: https://reviews.llvm.org/D53112
llvm-svn: 345218
Until now, we've only checked whether merging stores would cause a cycle via
the value argument, but the address and indexed offset arguments are also
capable of creating cycles in some situations.
The addresses are all base+offset with notionally the same base, but the base
SDNode may still be different (e.g. via an indexed load in one case, and an
ISD::ADD elsewhere). This allows cycles to creep in if one of these sources
depends on another.
The indexed offset is usually undef (representing a non-indexed store), but on
some architectures (e.g. 32-bit ARM-mode ARM) it can be an arbitrary value,
again allowing dependency cycles to creep in.
llvm-svn: 345200
When implementing memset's today we often see this pattern:
$x0 = MOV 0xXYXYXYXYXYXYXYXY
store $x0, ...
$w1 = MOV 0xXYXYXYXY
store $w1, ...
We first create a 64bit constant in a 64bit register with all bytes the
same and then create a 32bit constant with all bytes the same in a 32bit
register. In many targets we could just access the lower byte of the
64bit register instead.
- Ideally this would be handled by the ConstantHoist pass but it runs
too early when memset isn't expanded yet.
- The memset expansion code already had this optimization implemented,
however SelectionDAG constantfolding would constantfold the
"trunc(bigconstnat)" pattern to "smallconstant".
- This patch makes the memset expansion mark the constant as Opaque and
stop DAGCombiner from constant folding in this situation. (Similar to
how ConstantHoisting marks things as Opaque to avoid folding
ADD/SUB/etc.)
Differential Revision: https://reviews.llvm.org/D53181
llvm-svn: 345102
I've included a fix to DAGCombiner::ForwardStoreValueToDirectLoad that I believe will prevent the previous miscompile.
Original commit message:
Theoretically this was done to simplify the amount of isel patterns that were needed. But it also meant a substantial number of our isel patterns have to match an explicit bitcast. By making the vXi32/vXi16/vXi8 types legal for loads, DAG combiner should be able to change the load type to rem
I had to add some additional plain load instruction patterns and a few other special cases, but overall the isel table has reduced in size by ~12000 bytes. So it looks like this promotion was hurting us more than helping.
I still have one crash in vector-trunc.ll that I'm hoping @RKSimon can help with. It seems to relate to using getTargetConstantFromNode on a load that was shrunk due to an extract_subvector combine after the constant pool entry was created. So we end up decoding more mask elements than the lo
I'm hoping this patch will simplify the number of patterns needed to remove the and/or/xor promotion.
Reviewers: RKSimon, spatel
Reviewed By: RKSimon
Subscribers: llvm-commits, RKSimon
Differential Revision: https://reviews.llvm.org/D53306
llvm-svn: 344965
Introduce new versions that follow the IEEE semantics
to help with legalization that may need quieted inputs.
There are some regressions from inserting unnecessary
canonicalizes when these are matched from fast math
fcmp + select which should be fixed in a future commit.
llvm-svn: 344914
This is a late backend subset of the IR transform added with:
D52439
We can confirm that the conversion to a 'trunc' is correct by running:
$ opt -instcombine -data-layout="e"
(assuming the IR transforms are correct; change "e" to "E" for big-endian)
As discussed in PR39016:
https://bugs.llvm.org/show_bug.cgi?id=39016
...the pattern may emerge during legalization, so that's we are waiting for an
insertelement to become a scalar_to_vector in the pattern matching here.
The DAG allows for fun variations that are not possible in IR. Result types for
extracts and scalar_to_vector don't necessarily match input types, so that means
we have to be a bit more careful in the transform (see code comments).
The tests show that we don't handle cases that require a shift (as we did in the
IR version). I've left that as a potential follow-up because I'm not sure if
that's a real concern at this late stage.
Differential Revision: https://reviews.llvm.org/D53201
llvm-svn: 344872
I want to add another pattern here that includes scalar_to_vector,
so this makes that patch smaller. I was hoping to remove the
hasOneUse() check because it shouldn't be necessary for common
codegen, but an AMDGPU test has a comment suggesting that the
extra check makes things better on one of those targets.
llvm-svn: 344320
Summary:
Extend analysis forwarding loads from preceeding stores to work with
extended loads and truncated stores to the same address so long as the
load is fully subsumed by the store.
Hexagon's swp-epilog-phis.ll and swp-memrefs-epilog1.ll test are
deleted as they've no longer seem to be relevant.
Reviewers: RKSimon, rnk, kparzysz, javed.absar
Subscribers: sdardis, nemanjai, hiraditya, atanasyan, llvm-commits
Differential Revision: https://reviews.llvm.org/D49200
llvm-svn: 344142
We already do the following combines:
(bitcast int (and (bitcast fp X to int), 0x7fff...) to fp) -> fabs X
(bitcast int (xor (bitcast fp X to int), 0x8000...) to fp) -> fneg X
When the target has "bit preserving fp logic". This patch just extends it
to also combine:
(bitcast int (or (bitcast fp X to int), 0x8000...) to fp) -> fneg (fabs X)
As some targets have fnabs and even those that don't can efficiently lower
both the fabs and the fneg.
Differential revision: https://reviews.llvm.org/D44548
llvm-svn: 344093
This change is proposed as a part of D44548, but we
need this independently to avoid regressions from improved
undef propagation in SimplifyDemandedVectorElts().
llvm-svn: 343940
And use that to transform fsub with zero constant operands.
The integer part isn't used yet, but it is proposed for use in
D44548, so adding both enhancements here makes that
patch simpler.
llvm-svn: 343865
This fixes a case of bad index calculation when merging mismatching
vector types. This changes the existing code to just use the existing
extract_{subvector|element} and a bitcast (instead of bitcast first and
then newly created extract_xxx) so we don't need to adjust any indices
in the first place.
rdar://44584718
Differential Revision: https://reviews.llvm.org/D52681
llvm-svn: 343493
The SINT_TO_FP<->UINT_TO_FP combines for non-negative integers should only occur for legal ops once LegalOperations = true
No test case to hand, noticed when investigating PR38226 + PR38970
llvm-svn: 343405
DAGCombine will try to fold two loads that feed a SELECT or SELECT_CC
after the select, resulting in a select of an address and a single
load after.
If either of the loads depend on the other, this is not legal as it
could introduce cycles. However, it only checked this if the opcode
was a SELECT, and not for a SELECT_CC.
Unfortunately, the only reproducer I have for this is for our
downstream target. I've tried getting it to trigger on an upstream one
but haven't been successful.
Patch thanks to Bevin Hansson.
llvm-svn: 342980
This is a preliminary step towards solving PR14613:
https://bugs.llvm.org/show_bug.cgi?id=14613
If we have an 'add' instruction that sets flags, we can use that to eliminate an
explicit compare instruction or some other instruction (cmn) that sets flags for
use in the later select.
As shown in the unchanged tests that use 'icmp ugt %x, %a', we're effectively
reversing an IR icmp canonicalization that replaces a variable operand with a
constant:
https://rise4fun.com/Alive/V1Q
But we're not using 'uaddo' in those cases via DAG transforms. This happens in
CGP after D8889 without checking target lowering to see if the op is supported.
So AArch already shows 'uaddo' codegen for the i8/i16/i32/i64 test variants with
"using_cmp_sum" in the title. That's the pattern that CGP matches as an unsigned
saturated add and converts to uaddo without checking target capabilities.
This patch is gated by isOperationLegalOrCustom(ISD::UADDO, VT), so we see only
see AArch diffs for i32/i64 in the tests with "using_cmp_notval" in the title
(unlike x86 which sees improvements for all sizes because all sizes are 'custom').
But the AArch code (like x86) looks better when translated to 'uaddo' in all cases.
So someone that is involved with AArch may want to set i8/i16 to 'custom' for UADDO,
so this patch will fire on those tests.
Another possibility given the existing behavior: we could remove the legal-or-custom
check altogether because we're assuming that a UADDO sequence is canonical/optimal
before we ever reach here. But that seems like a bug to me. If the target doesn't
have an add-with-flags op, then it's not likely that we'll get optimal DAG combining
using a UADDO node. This is similar justification for why we don't canonicalize IR to
the overflow math intrinsic sibling (llvm.uadd.with.overflow) for UADDO in the first
place.
Differential Revision: https://reviews.llvm.org/D51929
llvm-svn: 342886
This code handled SCALAR_TO_VECTOR being returned by the recursion, but the code that used to return SCALAR_TO_VECTOR was removed in 2015.
llvm-svn: 342856
This comment was misleading about why we were restricting to before legalize types. The reason given would only apply to before legalize ops. But there is a before legalize types reason that should also be listed.
llvm-svn: 342851
This is an alternative to https://reviews.llvm.org/D37896. We can't decompose
multiplies generically without a target hook to tell us when it's profitable.
ARM and AArch64 may be able to remove some existing code that overlaps with
this transform.
This extends D52195 and may resolve PR34474:
https://bugs.llvm.org/show_bug.cgi?id=34474
(still an open question about transforming legal vector multiplies, but we
could open another bug report for those)
llvm-svn: 342844
x86 had 2 versions of peekThroughBitcast. DAGCombiner had 1. Plus, it had a 1-off implementation for the one-use variant.
Move the x86 versions of the code to SelectionDAG, so we don't have different copies of the code.
No functional change intended.
I'm putting this next to isBitwiseNot() because I am planning to use it in there. Another option is next to the
helpers in the ISD namespace (eg, ISD::isConstantSplatVector()). But if there's no good reason for those to be
there, I'd prefer to pull other helpers over to SelectionDAG in follow-up steps.
Differential Revision: https://reviews.llvm.org/D52285
llvm-svn: 342669
The test diff in not-and-simplify.ll is from a use in SimplifyDemandedBits,
and the test diff in add.ll is from a DAGCombiner transform.
llvm-svn: 342594
This is an alternative to D37896. I don't see a way to decompose multiplies
generically without a target hook to tell us when it's profitable.
ARM and AArch64 may be able to remove some duplicate code that overlaps with
this transform.
As a first step, we're only getting the most clear wins on the vector examples
requested in PR34474:
https://bugs.llvm.org/show_bug.cgi?id=34474
As noted in the code comment, it's likely that the x86 constraints are tighter
than necessary, but it may not always be a win to replace a pmullw/pmulld.
Differential Revision: https://reviews.llvm.org/D52195
llvm-svn: 342554
This is a follow-up suggested in D51630 and originally proposed as an IR transform in D49040.
Copying the motivational statement by @evandro from that patch:
"This transformation helps some benchmarks in SPEC CPU2000 and CPU2006, such as 188.ammp,
447.dealII, 453.povray, and especially 300.twolf, as well as some proprietary benchmarks.
Otherwise, no regressions on x86-64 or A64."
I'm proposing to add only the minimum support for a DAG node here. Since we don't have an
LLVM IR intrinsic for cbrt, and there are no other DAG ways to create a FCBRT node yet, I
don't think we need to worry about DAG builder, legalization, a strict variant, etc. We
should be able to expand as needed when adding more functionality/transforms. For reference,
these are transform suggestions currently listed in SimplifyLibCalls.cpp:
// * cbrt(expN(X)) -> expN(x/3)
// * cbrt(sqrt(x)) -> pow(x,1/6)
// * cbrt(cbrt(x)) -> pow(x,1/9)
Also, given that we bail out on long double for now, there should not be any logical
differences between platforms (unless there's some platform out there that has pow()
but not cbrt()).
Differential Revision: https://reviews.llvm.org/D51753
llvm-svn: 342348
Add support for bitcasts from float type to an integer type of the same element bitwidth.
There maybe cases where we need to support different widths (e.g. as SSE __m128i is treated as v2i64) - but I haven't seen cases of this in the wild yet.
llvm-svn: 341652
This was proposed as an IR transform in D49306, but it was not clearly justifiable as a canonicalization.
Here, we only do the transform when the target tells us that sqrt can be lowered with inline code.
This is the basic case. Some potential enhancements are in the TODO comments:
1. Generalize the transform for other exponents (allow more than 2 sqrt calcs if that's really cheaper).
2. If we have less fast-math-flags, generate code to avoid -0.0 and/or INF.
3. Allow the transform when optimizing/minimizing size (might require a target hook to get that right).
Note that by default, x86 converts single-precision sqrt calcs into sqrt reciprocal estimate with
refinement. That codegen is controlled by CPU attributes and can be manually overridden. We have plenty
of test coverage for that already, so I didn't bother to include extra testing for that here. AArch uses
its full-precision ops in all cases (not sure if that's the intended behavior or not, but that should
also be covered by existing tests).
Differential Revision: https://reviews.llvm.org/D51630
llvm-svn: 341481
Summary:
I'm not sure if this patch is correct or if it needs more qualifying somehow. Bitcast shouldn't change the size of the load so it should be ok? We already do something similar for stores. We'll change the type of a volatile store if the resulting store is Legal or Custom. I'm not sure we should be allowing Custom there...
I was playing around with converting X86 atomic loads/stores(except seq_cst) into regular volatile loads and stores during lowering. This would allow some special RMW isel patterns in X86InstrCompiler.td to be removed. But there's some floating point patterns in there that didn't work because we don't fold (f64 (bitconvert (i64 volatile load))) or (f32 (bitconvert (i32 volatile load))).
Reviewers: efriedma, atanasyan, arsenm
Reviewed By: efriedma
Subscribers: jvesely, arsenm, sdardis, kzhuravl, wdng, yaxunl, dstuttard, tpr, t-tye, arichardson, jrtc27, atanasyan, jfb, llvm-commits
Differential Revision: https://reviews.llvm.org/D50491
llvm-svn: 340797
I noticed this along with the patterns in D51125, but when the index is variable,
we don't convert insertelement into a build_vector.
For x86, that means these get expanded at legalization time into the loading/spilling
code that we see in the tests. I think it's always better to avoid going to memory on
these, and we get the optimal 'broadcast' if it's available.
I suspect other targets may want to look at enabling the hook. AArch64 and AMDGPU have
regression tests that would be affected (although I did not check what would happen in
those cases). In the most basic cases shown here, AArch64 would probably do much
better with a splat.
Differential Revision: https://reviews.llvm.org/D51186
llvm-svn: 340705
Previously we allowed the store to be Custom. But without knowing for sure that the Custom handling won't split the store, we shouldn't convert a volatile store. We also probably shouldn't be creating a store the requires custom handling after LegalizeOps. This could lead to an infinite loop if the custom handling was to insert a bitcast. Though I guess isStoreBitCastBeneficial could be used to block such a loop.
The test changes here are due to the volatile part of this. The stores in the test are all volatile and i32 stores are marked custom, So we are no longer converting them
This is related to D50491 where I was trying to allow some bitcasting of volatile loads
Differential Revision: https://reviews.llvm.org/D50578
llvm-svn: 340626
During combining, ReduceLoadWdith is used to combine AND nodes that
mask loads into narrow loads. This patch allows the mask to be a
shifted constant. This results in a narrow load which is then left
shifted to compensate for the new offset.
Differential Revision: https://reviews.llvm.org/D50432
llvm-svn: 340261
Summary:
I believe this restores the behavior we had before r339147.
Fixes PR38622.
Reviewers: RKSimon, chandlerc, spatel
Reviewed By: chandlerc
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D50936
llvm-svn: 340120
Add support for cases where only some c1+c2 results exceed the max bitshift, clamping accordingly.
Differential Revision: https://reviews.llvm.org/D35722
llvm-svn: 340010
When nodes are reassociated the vector-reduction flag gets lost.
The test case is here is what would happen if you had a sum of absolute differences loop that started with a non-zero but contant sum and that loop was unrolled. The vectorizer will generate a constant vector for the initial value. And DAGCombiner reassociate tries to move it down the addition tree erasing the vector-reduction flag. Interestingly this moves constants the opposite direction of the reassociate IR pass.
I've chosen to just punt on the reassociate, but I suppose we could maybe preserve the flag if both nodes have it set.
Differential Revision: https://reviews.llvm.org/D50827
llvm-svn: 339946
Intentionally excluding nodes from the DAGCombine worklist is likely to
lead to weird optimizations and infinite loops, so it's generally a bad
idea.
To avoid the infinite loops, fix DAGCombine to use the
isDesirableToCommuteWithShift target hook before performing the
transforms in question, and implement the target hook in the ARM backend
disable the transforms in question.
Fixes https://bugs.llvm.org/show_bug.cgi?id=38530 . (I don't have a
reduced testcase for that bug. But we should have sufficient test
coverage for PerformSHLSimplify given that we're not playing weird
tricks with the worklist. I can try to bugpoint it if necessary,
though.)
Differential Revision: https://reviews.llvm.org/D50667
llvm-svn: 339734
Summary: This change provides a common optimization path for both Unsafe and FMF driven optimization for this fsub fold adding reassociation, as it the flag that most closely represents the translation
Reviewers: spatel, wristow, arsenm
Reviewed By: spatel
Subscribers: wdng
Differential Revision: https://reviews.llvm.org/D50195
llvm-svn: 339357
isNegatibleForFree() should not matter here (as the test diffs show)
because it's always a win to replace an fsub+fadd with fneg. The
problem in D50195 persists because either (1) we are doing these
folds in the wrong order or (2) we're missing another fold for fadd.
llvm-svn: 339299
I don't know if it's possible to expose this diff in a test,
but we should always try simplifications (no new nodes created)
before more complicated transforms for efficiency (similar to
what we do in IR).
llvm-svn: 339298
The isConstOrConstSplat result is only used in a ISD::matchUnaryPredicate call which can perform the equivalent iteration just as quickly.
llvm-svn: 339262
Scatter could have multiple identical indices. We need to maintain sequential order. We get this right in LegalizeVectorTypes, but not in this code.
Differential Revision: https://reviews.llvm.org/D50374
llvm-svn: 339157
This was missed in D50185.
NFC until we add actual non-uniform support to BuildSDIV (similar BuildUDIV support in D49248) - for now it just early outs.
llvm-svn: 339147
This patch refactors the existing TargetLowering::BuildUDIV base implementation to support non-uniform constant vector denominators.
It also includes a fold for MULHU by pow2 constants to SRL which can now more readily occur from BuildUDIV.
Differential Revision: https://reviews.llvm.org/D49248
llvm-svn: 339121
Src0 doesn't really convey any meaning to what the operand is. Passthru matches what's used in the documentation for the intrinsic this comes from.
llvm-svn: 339101
First step towards a BuildSDIV equivalent to D49248 for non-uniform vector support - this just pushes the splat detection down into TargetLowering::BuildSDIV where its still used.
Differential Revision: https://reviews.llvm.org/D50185
llvm-svn: 338838
The vector contains the SDNodes that these functions create. The number of nodes is always a small number so we should use SmallVector to avoid a heap allocation.
llvm-svn: 338329
This is exchanging a sub-of-1 with add-of-minus-1:
https://rise4fun.com/Alive/plKAH
This is another step towards improving select-of-constants codegen (see D48970).
x86 is the motivating target, and those diffs all appear to be wins. PPC and AArch64 look neutral.
I've limited this to early combining (!LegalOperations) in case a target wants to reverse it, but
I think canonicalizing to 'add' is more likely to produce further transforms because we have more
folds for 'add'.
Differential Revision: https://reviews.llvm.org/D49924
llvm-svn: 338317
Thinking about it more it might be possible for the later nodes to be folded in getNode in such a way that the other created nodes are left dead. This can cause use counts to be incorrect on nodes that aren't dead.
So its probably safer to leave this alone.
llvm-svn: 338298
Summary:
Attempt to extract a shrl from a udiv or a shl from a mul if this allows a rotate to be formed. This targets cases where the input to a rotate pattern was a mul or udiv by a constant and InstCombine merged one of the shifts with the op.
Patch by: sameconrad (Sam Conrad)
Reviewers: RKSimon, craig.topper, spatel, lebedev.ri, javed.absar
Reviewed By: lebedev.ri
Subscribers: efriedma, kparzysz, llvm-commits
Differential Revision: https://reviews.llvm.org/D47681
llvm-svn: 338270
The DAGCombiner has a mechanism for ensuring all nodes have been visited at least once. Every time a node is visited, it makes sure its operands have been in the worklist at least once. This ensures that when multiple nodes are created by a combine, only the last node needs to be returned. The earlier nodes can all be found Through this operand check. These means we don't need to explicitly add nodes to the worklist when a combine creates multiple nodes.
I've removed the most obvious cases here. There are probably more than can be removed.
llvm-svn: 338222
This removes the need for an assert to ensure the pointer isn't null.
Years ago we had ifs the checked the pointer was non-null before very access to the vector. These checks were removed and replaced with a single assert. But a reference seems more suitable here.
llvm-svn: 338205
This is a follow-up suggested in D48970.
Alive proofs:
https://rise4fun.com/Alive/sII
We can eliminate an instruction in the usual select-of-constants
to bit hack transform by adjusting the add/sub with constant.
This is always a win.
There are more transforms that are likely wins, but they may need
target hooks in case some targets do not benefit.
This is another step towards making up for canonicalizing to
select-of-constants in rL331486.
llvm-svn: 338132
The DAGCombiner has a system for ensuring all nodes are visited. It doesn't require an AddToWorkList for every node that is created by a combine.
llvm-svn: 338079
When merging through a TokenFactor we need to check that the
load may be ordered such that no other aliasing memory operations may
happen. It is not sufficient to just check that the load is a member
of the chain token factor as it there may be a indirect chain. Require
the load's chain has only one use.
This fixes PR37826.
Reviewers: spatel, davide, efriedma, craig.topper, RKSimon
Subscribers: hiraditya, llvm-commits
Differential Revision: https://reviews.llvm.org/D49388
llvm-svn: 337560
If we are only extracting vector elements via EXTRACT_VECTOR_ELT(s) we may be able to use SimplifyDemandedVectorElts to avoid unnecessary vector ops.
Differential Revision: https://reviews.llvm.org/D49262
llvm-svn: 337258
This is almost the same as an existing IR canonicalization in instcombine,
so I'm assuming this is a good early generic DAG combine too.
The motivation comes from reduced bit-hacking for select-of-constants in IR
after rL331486. We want to restore that functionality in the DAG as noted in
the commit comments for that change and the llvm-dev discussion here:
http://lists.llvm.org/pipermail/llvm-dev/2018-July/124433.html
The PPC and AArch tests show that those targets are already doing something
similar. x86 will be neutral in the minimal case and generally better when
this pattern is extended with other ops as shown in the signbit-shift.ll tests.
Note the asymmetry: we don't include the (extend (ifneg X)) transform because
it already exists in SimplifySelectCC(), and that is verified in the later
unchanged tests in the signbit-shift.ll files. Without the 'not' op, the
general transform to use a shift is always a win because that's a single
instruction.
Alive proofs:
https://rise4fun.com/Alive/ysli
Name: if pos, get -1
%c = icmp sgt i16 %x, -1
%r = sext i1 %c to i16
=>
%n = xor i16 %x, -1
%r = ashr i16 %n, 15
Name: if pos, get 1
%c = icmp sgt i16 %x, -1
%r = zext i1 %c to i16
=>
%n = xor i16 %x, -1
%r = lshr i16 %n, 15
Differential Revision: https://reviews.llvm.org/D48970
llvm-svn: 337130
Reuse this function as to test correctness and profitability of
reducing width of either load or store operations.
Reviewsers: samparker
Differential Revision: https://reviews.llvm.org/D48624
llvm-svn: 336800
This allows us to use SelectionDAG::isKnownNeverZero in DAGCombiner::visitREM (visitSDIVLike/visitUDIVLike handle the checking for constants).
llvm-svn: 336779
First stage in PR38057 - support non-uniform constant vectors in the combine to reuse the division-by-constant logic.
We can definitely do better for srem pow2 remainders (and avoid that extra multiply....) but this at least helps keep everything on the vector unit.
Differential Revision: https://reviews.llvm.org/D48975
llvm-svn: 336774
As suggested by @efriedma on D48975, this patch separates the BuildDiv/Pow2 style optimizations from the rest of the visitSDIV/visitUDIV to make it easier to reuse the combines and will allow us to avoid some rather nasty node recursive combining in visitREM.
llvm-svn: 336656
Summary:
This adds a reverse transform for the instcombine canonicalizations
that were added in D47980, D47981.
As discussed later, that was worse at least for the code size,
and potentially for the performance, too.
https://rise4fun.com/Alive/Zmpl
Reviewers: craig.topper, RKSimon, spatel
Reviewed By: spatel
Subscribers: reames, llvm-commits
Differential Revision: https://reviews.llvm.org/D48768
llvm-svn: 336585
As discussed on PR37989, this patch adds EXTRACT_SUBVECTOR handling to TargetLowering::SimplifyDemandedVectorElts and calls it from DAGCombiner::visitEXTRACT_SUBVECTOR.
Differential Revision: https://reviews.llvm.org/D48825
llvm-svn: 336490
D48278
Allow to reduce redundant shift masks.
For example:
x1 = x & 0xAB00
x2 = (x >> 8) & 0xAB
can be reduced to:
x1 = x & 0xAB00
x2 = x1 >> 8
It only allows folding when the masks and shift values are constants.
llvm-svn: 336426
The combine added in commit 329525 overlooked the case where one, but not all, of the divisor elements is -1, -1 is the only power of two value for which the sdiv expansion recipe breaks.
Thanks to @zvi for the original patch.
Differential Revision: https://reviews.llvm.org/D45806
llvm-svn: 336048
We could get away with it for constant folded cases, but not for rL335719.
Thanks to Krzysztof Parzyszek for noticing.
Reapply original commit rL335821 which was reverted at rL335871 due to a WebAssembly bug that was fixed at rL335884.
llvm-svn: 335886
As noted in the D44909 review, the transform from (fptosi+sitofp) to ftrunc
can produce -0.0 where the original code does not:
#include <stdio.h>
int main(int argc) {
float x;
x = -0.8 * argc;
printf("%f\n", (float)((int)x));
return 0;
}
$ clang -O0 -mavx fp.c ; ./a.out
0.000000
$ clang -O1 -mavx fp.c ; ./a.out
-0.000000
Ideally, we'd use IR/node flags to predicate the transform, but the IR parser
doesn't currently allow fast-math-flags on the cast instructions. So for now,
just use the function attribute that corresponds to clang's "-fno-signed-zeros"
option.
Differential Revision: https://reviews.llvm.org/D48085
llvm-svn: 335761
This patch has the same motivating example as D48466:
define void @foo(i64 %x, i32 %c.0282.in, i32 %d.0280, i32* %ptr0, i32* %ptr1) {
%c.0282 = and i32 %c.0282.in, 268435455
%a16 = lshr i64 32508, %x
%a17 = and i64 %a16, 1
%tobool = icmp eq i64 %a17, 0
%. = select i1 %tobool, i32 1, i32 2
%.286 = select i1 %tobool, i32 27, i32 26
%shr97 = lshr i32 %c.0282, %.
%shl98 = shl i32 %c.0282.in, %.286
%or99 = or i32 %shr97, %shl98
%shr100 = lshr i32 %d.0280, %.
%shl101 = shl i32 %d.0280, %.286
%or102 = or i32 %shr100, %shl101
store i32 %or99, i32* %ptr0
store i32 %or102, i32* %ptr1
ret void
}
...but I'm trying to kill the setcc bool math sooner rather than later.
By matching a larger pattern that includes both the low-bit mask and the trailing add/sub,
we can create a universally good fold because we always eliminate the condition code
intermediate value.
Here are Alive proofs for these (currently instcombine folds the 'add' variants, but
misses the 'sub' patterns):
https://rise4fun.com/Alive/Gsyp
Name: sub of zext cmp mask
%a = and i8 %x, 1
%c = icmp eq i8 %a, 0
%z = zext i1 %c to i32
%r = sub i32 C1, %z
=>
%optional_cast = zext i8 %a to i32
%r = add i32 %optional_cast, C1-1
Name: add of zext cmp mask
%a = and i32 %x, 1
%c = icmp eq i32 %a, 0
%z = zext i1 %c to i8
%r = add i8 %z, C1
=>
%optional_cast = trunc i32 %a to i8
%r = sub i8 C1+1, %optional_cast
All of the tests look like improvements or neutral to me. But it is possible that x86
test+set+bitop is better than what we now show here. I suspect we could do better by
adding another fold for the 'sub' variants.
We start with select-of-constant in IR in the larger motivating test, so that's why I
included tests with selects. Proofs for those variants:
https://rise4fun.com/Alive/Bx1
Name: true const is bigger
Pre: C2 == (C1 + 1)
%a = and i8 %x, 1
%c = icmp eq i8 %a, 0
%r = select i1 %c, i64 C2, i64 C1
=>
%z = zext i8 %a to i64
%r = sub i64 C2, %z
Name: false const is bigger
Pre: C2 == (C1 + 1)
%a = and i8 %x, 1
%c = icmp eq i8 %a, 0
%r = select i1 %c, i64 C1, i64 C2
=>
%z = zext i8 %a to i64
%r = add i64 C1, %z
Differential Revision: https://reviews.llvm.org/D48466
llvm-svn: 335433
Allowed folding for "and/or" binops with non-constant operand if
arguments of select are 0/-1 values.
Normally this code with "and" opcode does not get to a DAG combiner
and simplified yet in the InstCombine. However AMDGPU produces it
during lowering and InstCombine has no chance to optimize it out.
In turn the same pattern with "or" opcode can reach DAG.
Differential Revision: https://reviews.llvm.org/D48301
llvm-svn: 335250
The alignment parameter to getExtLoad is treated as a base alignment,
not the alignment of the load (base + offset). When we infer a better
alignment for a Ptr we need to ensure that it applies to the base to
prevent the alignment on the load from being wrong.
This fixes a bug where the alignment could then be used to incorrectly
prove noalias between a load and a store, leading to a miscompile.
Differential Revision: https://reviews.llvm.org/D48029
llvm-svn: 335210
Previously this folding was done only if select is a first operand.
However, for non-commutative operations constant may go before
select.
Differential Revision: https://reviews.llvm.org/D48223
llvm-svn: 335167
Summary: This patch originated from D46562 and is a proper subset, with some issues addressed.
Reviewers: spatel, hfinkel, wristow, arsenm, javed.absar
Reviewed By: spatel
Subscribers: wdng, nhaehnle
Differential Revision: https://reviews.llvm.org/D47909
llvm-svn: 334996
Summary: Refactoring for all constant cases which require AllowNewConst and some staging for future fmf usage.
Reviewers: spatel, hfinkel, wristow
Reviewed By: spatel
Subscribers: nhaehnle
Differential Revision: https://reviews.llvm.org/D48289
llvm-svn: 334984
Summary: This patch originated from D47388 and is a proper subset of the originating changes, containing only the fmf optimization guard extensions.
Reviewers: spatel, hfinkel, wristow, arsenm, javed.absar, rampitec, nhaehnle, nemanjai
Reviewed By: rampitec, nhaehnle
Subscribers: tpr, nemanjai, wdng
Differential Revision: https://reviews.llvm.org/D47918
llvm-svn: 334876
Summary: This patch originated from D46562 and is a proper subset, with some issues addressed.
Reviewers: spatel, hfinkel, wristow, arsenm
Reviewed By: spatel
Subscribers: wdng, nhaehnle
Differential Revision: https://reviews.llvm.org/D47954
llvm-svn: 334862
Summary:
Here we relax the old constraint which utilized unsafe with the TargetOption flag HonorSignDependentRoundingFPMathOption, with the assertion that unsafe is no longer needed or never was required for correctness on FDIV/FMUL.
Reviewers: spatel, hfinkel, wristow, arsenm, javed.absar
Reviewed By: spatel
Subscribers: efriedma, wdng, tpr
Differential Revision: https://reviews.llvm.org/D48057
llvm-svn: 334769
Summary: A FMF constraint is added to FADD with unsafe still available as the fallback
Reviewers: spatel, wristow, arsenm, hfinkel
Reviewed By: spatel
Subscribers: wdng
Differential Revision: https://reviews.llvm.org/D48180
llvm-svn: 334753
We're constant folding here, so we shouldn't check uses. This matches
the IR optimizer behavior.
The x86 test shows the expected win. The AArch64 test shows something
else. This only seems to happen if the "generic" AArch64 CPU model is
used by MachineCombiner, so I'll file a bug report to follow-up.
llvm-svn: 334608
Summary: This patch originated from D46562 and is a proper subset, with some issues addressed for fmul.
Reviewers: spatel, hfinkel, wristow, arsenm
Reviewed By: spatel
Subscribers: nhaehnle, wdng
Differential Revision: https://reviews.llvm.org/D47911
llvm-svn: 334514
Implement default legalization of rotates: either in terms of the rotation
in the opposite direction (if legal), or in terms of shifts and ors.
Implement generating of rotate instructions for Hexagon. Hexagon only
supports rotates by an immediate value, so implement custom lowering of
ROTL/ROTR on Hexagon. If a rotate is not legal, use the default expansion.
Differential Revision: https://reviews.llvm.org/D47725
llvm-svn: 334497
This would fail before because 1x vectors aren't legal,
so instead just use the scalar type.
Avoids regressions in a future AMDGPU commit to add
v4i16/v4f16 as legal types.
Test update is just the one test that this triggers
on in tree now. It wasn't checking anything before.
The result is completely changed since the selects
are eliminated. Not sure if it's considered better
or not.
llvm-svn: 334440
This patch started off much more general and ambitious, but it's been a nightmare
seeing all the ways x86 vector codegen can go wrong.
So the code is still structured to allow extending easily, but it's currently
limited in several ways:
1. Only handle cases with an extending load.
2. Only handle cases with a zero constant compare.
3. Ignore setcc with vector bitmask (SetCCWidth != 1) - so AVX512 should be unaffected.
The motivating case from PR37427:
https://bugs.llvm.org/show_bug.cgi?id=37427
...is the 1st test, and that shows the expected win - we eliminated the unnecessary
intermediate cast.
There's a clear regression in the last test (sgt_zero_fp_select) because we longer
recognize a 'SHRUNKBLEND' opportunity. I think that general problem is also present
in sgt_zero, so I'll try to fix that in a follow-up. We need to match a sign-bit
setcc from a sign-extended operand and remove it.
Differential Revision: https://reviews.llvm.org/D47330
llvm-svn: 334378
SmallSet forwards to SmallPtrSet for pointer types. SmallPtrSet supports iteration, but a normal SmallSet doesn't. So if it wasn't for the forwarding, this wouldn't work.
These places were found by hiding the begin/end methods in the SmallSet forwarding
llvm-svn: 334343
Summary: This patch originated from D46562 and is a proper subset, with some issues addressed for fsub.
Reviewers: spatel, hfinkel, wristow, arsenm
Reviewed By: spatel
Subscribers: wdng
Differential Revision: https://reviews.llvm.org/D47910
llvm-svn: 334306
While trying to propagate AND masks back to loads, we currently allow
one non-load node to be included as a leaf in chain. This fix now
limits that node to produce only a single data value.
Differential Revision: https://reviews.llvm.org/D47878
llvm-svn: 334268
Summary: This change uses fmf subflags to guard fma optimizations as well as unsafe. These changes originated from D46483 and have been simplified via getNode.
Reviewers: spatel, arsenm, hfinkel, javed.absar
Reviewed By: spatel
Subscribers: nemanjai, wdng
Differential Revision: https://reviews.llvm.org/D47388
llvm-svn: 334242
This avoids regressions in a future AMDGPU change
to make v4i16/v4f16 legal. For these types, build_vector
is implemented as bitcasted operations on v2i32. This
combine was creating v4i16s out of what would have been
already been a v2i32 build_vector, creating a mess
of nodes that never get cleaned up.
I'm not sure this is the right condition to check.
I initially tried just checking for the legality of the
new build_vector. This works for my case, but breaks dozens
of x86 tests. A Mips test seems to show some improvement
or at least a neutral change. I don't want to think
about how long it would take to analyze the set of
different x86 vector operations impacted.
Test included in future commit.
llvm-svn: 334218
Summary:
This change uses fmf subflags to guard optimizations as well as unsafe. These changes originated from D46483.
It contains only context for fsqrt.
Reviewers: spatel, hfinkel, arsenm
Reviewed By: spatel
Subscribers: hfinkel, wdng, andrew.w.kaylor, wristow, efriedma, nemanjai
Differential Revision: https://reviews.llvm.org/D47749
llvm-svn: 334113
Summary: This include variant for add, uaddo and addcarry. usubo and subcarry require the carry to be flipped to preserve semantic, but we chose to do the transform anyway in that case as to push the transform down the carry chain.
Reviewers: efriedma, spatel, RKSimon, zvi, bkramer
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D46505
llvm-svn: 333943
Summary: It has been deprecated in favor of SETCCCARRY for a year now and isn't used by any in tree backend.
Reviewers: efriedma, craig.topper, dblaikie, bkramer
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D47685
llvm-svn: 333939
Summary:
As pointed out in D46528, we errneously transform cases like `xor X, -1`,
even though we use said function.
It's because the `-1` is actually a bitcast there.
So i think we can just look through it in the function.
Differential Revision: https://reviews.llvm.org/D47156
llvm-svn: 332905
Summary:
This **appears** to be the last missing piece for the masked merge pattern handling in the backend.
This is [[ https://bugs.llvm.org/show_bug.cgi?id=37104 | PR37104 ]].
[[ https://bugs.llvm.org/show_bug.cgi?id=6773 | PR6773 ]] will introduce an IR canonicalization that is likely bad for the end assembly.
Previously, `andps`+`andnps` / `bsl` would be generated. (see `@out`)
Now, they would no longer be generated (see `@in`), and we need to make sure that they are generated.
Differential Revision: https://reviews.llvm.org/D46528
llvm-svn: 332904
SimplifyDemandedBits can remove bits from the masks for the shift amounts we need to see to detect rotates.
This patch uses zeroes from computeKnownBits to fill in some of these mask bits to make the match work.
As currently written this calls computeKnownBits even when the mask hasn't been simplified because it made the code simpler. If we're worried about compile time performance we can improve this.
I know we're talking about making a rotate intrinsic, but hopefully we can go ahead and do this change and just make sure the rotate intrinsic also handles it.
Differential Revision: https://reviews.llvm.org/D47116
llvm-svn: 332895
As part of merging stores we check that fusing the nodes does not
cause a cycle due to one candidate store being indirectly dependent on
another store (this may happen via chained memory copies). This is
done by searching if a store is a predecessor to another store's
value.
Prune the search at the candidate search's root node which is a
predecessor to all candidate stores. This reduces the
size of the subgraph searched in large basic blocks.
Reviewers: jyknight
Subscribers: llvm-commits, hiraditya
Differential Revision: https://reviews.llvm.org/D46955
llvm-svn: 332490
search. NFCI.
Migrate single-use and non-volatility, non-indexed requirements on
stores of immediate store values to candidate collection pass from
later stage.
llvm-svn: 332392
The DEBUG() macro is very generic so it might clash with other projects.
The renaming was done as follows:
- git grep -l 'DEBUG' | xargs sed -i 's/\bDEBUG\s\?(/LLVM_DEBUG(/g'
- git diff -U0 master | ../clang/tools/clang-format/clang-format-diff.py -i -p1 -style LLVM
- Manual change to APInt
- Manually chage DOCS as regex doesn't match it.
In the transition period the DEBUG() macro is still present and aliased
to the LLVM_DEBUG() one.
Differential Revision: https://reviews.llvm.org/D43624
llvm-svn: 332240
ExtendSetCCUses updates SETCC nodes which use a load (OriginalLoad) to
reflect a simplification to the load (ExtLoad).
Based on my reading, ExtendSetCCUses may create new nodes to extend a
constant attached to a SETCC. It also creates fresh SETCC nodes which
refer to any updated operands.
ISTM that the location applied to the new constant and SETCC nodes
should be the same as the location of the ExtLoad.
This was suggested by Adrian in https://reviews.llvm.org/D45995.
Part of: llvm.org/PR37262
Differential Revision: https://reviews.llvm.org/D46216
llvm-svn: 332119
This teaches tryToFoldExtOfLoad to set the right location on a
newly-created extload. With that in place, the logic for performing a
certain ([s|z]ext (load ...)) combine becomes identical for sexts and
zexts, and we can get rid of one copy of the logic.
The test case churn is due to dependencies on IROrders inherited from
the wrong SDLoc.
Part of: llvm.org/PR37262
Differential Revision: https://reviews.llvm.org/D46158
llvm-svn: 332118
Part of the logic for combining (zext (load ...)) and (sext (load ...))
is duplicated. This creates problems because bugs in one version have to
be fixed again in the other version.
To address this, as a first step, I've extracted the duplicate logic
into a helper. I'll fix the debug location bug in the helper and
eliminate the copy of its logic in a followup.
Part of: llvm.org/PR37262
Differential Revision: https://reviews.llvm.org/D46157
llvm-svn: 332117
Summary:
The combine in rebuildSetCC may be combined to another
node leaving our references stale. Keep a handle on
it to avoid stale references.
Fixes PR36602.
Reviewers: dbabokin, RKSimon, eli.friedman, davide
Subscribers: hiraditya, uabelho, JesperAntonsson, qcolombet, llvm-commits
Differential Revision: https://reviews.llvm.org/D46404
llvm-svn: 331985
Previously if !LegalOperations we would blindly call getBitcast and hope that getNode would constant fold it. But if the conversion is between a vector and a scalar, getNode has no simplification.
This means we would just get back the original N. We would then return that N which would make the caller of visitBITCAST think that we used CombineTo and did our own worklist management. This prevents target specific optimizations from being called for vector/scalar bitcasts until after legal operations.
llvm-svn: 331896
The previous value of 8192 resulted in severe compile time hits in
some pathological cases.
rdar://39781410
Differential Revision: https://reviews.llvm.org/D46581
llvm-svn: 331888
Summary:
Split off from D46031.
The previous patch, D46493, completely disabled unfolding in case of immediates.
But we can do better:
{F6120274} {F6120277}
https://rise4fun.com/Alive/xJS
Reviewers: spatel, craig.topper
Reviewed By: spatel
Subscribers: andreadb, llvm-commits
Differential Revision: https://reviews.llvm.org/D46494
llvm-svn: 331685
Summary:
Split off from D46031.
In masked merge case, this degrades IPC by decreasing instruction count.
{F6108777}
The next patch should be able to recover and improve this.
This also affects the transform @spatel have added in D27489 / rL289738,
and the test coverage for X86 was missing.
But after i have added it, and looked at the changes in MCA, i'm somewhat confused.
{F6093591} {F6093592} {F6093593}
I'd say this regression is an improvement, since `IPC` increased in that case?
Reviewers: spatel, craig.topper
Reviewed By: spatel
Subscribers: andreadb, llvm-commits, spatel
Differential Revision: https://reviews.llvm.org/D46493
llvm-svn: 331684
Summary:
Split off form D46031.
It seems we don't want to transform the pattern if the `xor`'s are actually `not`'s.
In vector case, this breaks `andnpd` / `vandnps` patterns.
That being said, we may want to re-visit this `not` handling, maybe in D46073.
Reviewers: spatel, craig.topper, javed.absar
Reviewed By: spatel
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D46492
llvm-svn: 331595
Inspired by r331508, I did a grep and found these.
Mostly just change from dyn_cast to cast. Some cases also showed a dyn_cast result being converted to bool, so those I changed to isa.
llvm-svn: 331577
Summary: Adding support for Fast flags in the SDNode to leverage fast math sub flag usage.
Reviewers: spatel, arsenm, jbhateja, hfinkel, escha, qcolombet, echristo, wristow, javed.absar
Reviewed By: spatel
Subscribers: llvm-commits, rampitec, nhaehnle, tstellar, FarhanaAleen, nemanjai, javed.absar, jbhateja, hfinkel, wdng
Differential Revision: https://reviews.llvm.org/D45710
llvm-svn: 331547
The logic for this combine is almost identical to the logic for a
(sext (sextload x)) combine.
This commit factors out the logic so it can be shared by both combines,
and corrects the SDLoc assigned in the zext version of the combine.
Prior to this patch, for the given test case, we would apply the
location associated with the udiv instruction to instructions which
perform the load.
Part of: llvm.org/PR37262
llvm-svn: 331303
Prior to this patch, for the given test case, we would apply the
location associated with the sdiv instruction to instructions which
perform the load.
Part of: llvm.org/PR37262.
Differential Revision: https://reviews.llvm.org/D46222
llvm-svn: 331302
In DAGCombiner, we try to simplify this pattern:
([s|z]ext (load ...))
Conceptually, a new extload which is created while splitting the load
should have the same debug location as the load.
Making this change affects the IROrder of the new load, causing some
test case churn.
In practice, the new location is never different from the location of
the [s|z]ext, at least not during check-llvm or a stage2 build.
Part of: llvm.org/PR37262
Differential Revision: https://reviews.llvm.org/D46156
llvm-svn: 331301
Setting the right SDLoc on a newly-created zextload fixes a line table
bug which resulted in non-linear stepping behavior.
Several backend tests contained CHECK lines which relied on the IROrder
inherited from the wrong SDLoc. This patch breaks that dependence where
feasbile and regenerates test cases where not.
In some cases, changing a node's IROrder may alter register allocation
and spill behavior. This can affect performance. I have chosen not to
prevent this by applying a "known good" IROrder to SDLocs, as this may
hide a more general bug in the scheduler, or cause regressions on other
test inputs.
rdar://33755881, Part of: llvm.org/PR37262
Differential Revision: https://reviews.llvm.org/D45995
llvm-svn: 331300
We've been running doxygen with the autobrief option for a couple of
years now. This makes the \brief markers into our comments
redundant. Since they are a visual distraction and we don't want to
encourage more \brief markers in new code either, this patch removes
them all.
Patch produced by
for i in $(git grep -l '\\brief'); do perl -pi -e 's/\\brief //g' $i & done
Differential Revision: https://reviews.llvm.org/D46290
llvm-svn: 331272
Summary:
D42479 (rL329525) enabled SDIV combine for pow2 non-splat vector
dividers. But when there is a 1 in a vector, the instruction sequence to
be generated involves shifting a value by the number of its bit widths,
which is undefined
(c64f4dbfe3/lib/CodeGen/SelectionDAG/DAGCombiner.cpp (L6000-L6006)).
Especially, in architectures that do not support vector instructions,
each of element in a vector will be computed separately using scalar
operations, and then the resulting value will be undef for '1' values
in a vector.
(All 1's vector is fine; only vectors mixed with 1 and others will be
affected.)
Reviewers: RKSimon, jgravelle-google
Subscribers: jfb, dschuff, sbc100, jgravelle-google, llvm-commits
Differential Revision: https://reviews.llvm.org/D46161
llvm-svn: 331092
As noted, the attribute name is subject to change once we have
the clang side implemented, but it's clear that we need some
kind of attribute-based predication here based on the discussion
for:
rL330437
llvm-svn: 330951
As discussed in the post-review comments for rL330437,
we need to guard this fold to allow existing code to
keep working with the undefined behavior that they've
come to rely on.
That would mean duplicating more code than we already
have, so let's fix that first.
llvm-svn: 330947
We were previously prefering ZEXTLOAD over EXTLOAD if it is legal. This triggers during X86's promotion of i16->i32. Not sure about other targets.
Using ZEXTLOAD can prevent folding it to SEXTLOAD later if we were to promote a sign extended operand like we would need for SRA. However, X86 doesn't currently promote i16 SRA. I was looking into doing that which is how I found this issue.
This is also blocking our ability to fold 4 byte aligned EXTLOADs with "loadi32". This is what caused most of the test changes here.
Differential Revision: https://reviews.llvm.org/D45585#inline-402825
llvm-svn: 330781
Summary:
This is [[ https://bugs.llvm.org/show_bug.cgi?id=37104 | PR37104 ]].
[[ https://bugs.llvm.org/show_bug.cgi?id=6773 | PR6773 ]] will introduce an IR canonicalization that is likely bad for the end assembly.
Previously, `andl`+`andn`/`andps`+`andnps` / `bic`/`bsl` would be generated. (see `@out`)
Now, they would no longer be generated (see `@in`).
So we need to make sure that they are still generated.
If the mask is constant, we do nothing. InstCombine should have unfolded it.
Else, i use `hasAndNot()` TLI hook.
For now, only handle scalars.
https://rise4fun.com/Alive/bO6
----
I *really* don't like the code i wrote in `DAGCombiner::unfoldMaskedMerge()`.
It is super fragile. Is there something like IR Pattern Matchers for this?
Reviewers: spatel, craig.topper, RKSimon, javed.absar
Reviewed By: spatel
Subscribers: andreadb, courbet, kristof.beyls, javed.absar, rengolin, nemanjai, llvm-commits
Differential Revision: https://reviews.llvm.org/D45733
llvm-svn: 330646
This was originally committed at rL328921 and reverted at rL329920 to
investigate failures in Chrome. This time I've added to the ReleaseNotes
to warn users of the potential of exposing UB and let me repeat that
here for more exposure:
Optimization of floating-point casts is improved. This may cause surprising
results for code that is relying on undefined behavior. Code sanitizers can
be used to detect affected patterns such as this:
int main() {
float x = 4294967296.0f;
x = (float)((int)x);
printf("junk in the ftrunc: %f\n", x);
return 0;
}
$ clang -O1 ftrunc.c -fsanitize=undefined ; ./a.out
ftrunc.c:5:15: runtime error: 4.29497e+09 is outside the range of
representable values of type 'int'
junk in the ftrunc: 0.000000
Original commit message:
fptosi / fptoui round towards zero, and that's the same behavior as ISD::FTRUNC,
so replace a pair of casts with the equivalent node. We don't have to account for
special cases (NaN, INF) because out-of-range casts are undefined.
Differential Revision: https://reviews.llvm.org/D44909
llvm-svn: 330437
This is a transform that I limited in instcombine in rL329821 because it was
creating more instructions in IR when the cast has multiple uses.
But if the cast is free, then we can do the transform regardless of other
uses because it improves the potential throughput of the calculation by
removing a dependency on the fneg.
Differential Revision: https://reviews.llvm.org/D45598
llvm-svn: 330098
This change is exposing UB in source code - as was warned/predicted. :)
See D44909 for discussion. Reverting while we figure out how to fix things.
llvm-svn: 329920
Recommitting r329283, third time lucky...
If the SRL node is only used by an AND, we may be able to set the
ExtVT to the width of the mask, making the AND redundant. To support
this, another check has been added in isLegalNarrowLoad which queries
whether the load is valid.
Differential Revision: https://reviews.llvm.org/D41350
llvm-svn: 329551
In our real world application, we found the following optimization is missed in DAGCombiner
(zext (and/or/xor (shl/shr (load x), cst), cst)) -> (and/or/xor (shl/shr (zextload x), (zext cst)), (zext cst))
If the user of original zext is an add, it may enable further lea optimization on x86.
This patch add a new function CombineZExtLogicopShiftLoad to do this optimization.
Differential Revision: https://reviews.llvm.org/D44402
llvm-svn: 329516
Summary:
r327219 added wrappers to std::sort which randomly shuffle the container before sorting.
This will help in uncovering non-determinism caused due to undefined sorting
order of objects having the same key.
To make use of that infrastructure we need to invoke llvm::sort instead of std::sort.
Note: This patch is one of a series of patches to replace *all* std::sort to llvm::sort.
Refer the comments section in D44363 for a list of all the required patches.
Reviewers: bogner, rnk, MatzeB, RKSimon
Reviewed By: rnk
Subscribers: JDevlieghere, javed.absar, llvm-commits
Differential Revision: https://reviews.llvm.org/D45133
llvm-svn: 329435
Recommitting rL321259. Previosuly this caused an issue with PPCBE but
I didn't receieve a reproducer and didn't have the time to follow up.
If the issue appears again, please provide a reproducer so I can fix
it.
Original commit message:
If the SRL node is only used by an AND, we may be able to set the
ExtVT to the width of the mask, making the AND redundant. To support
this, another check has been added in isLegalNarrowLoad which queries
whether the load is valid.
Differential Revision: https://reviews.llvm.org/D41350
llvm-svn: 329160
fptosi / fptoui round towards zero, and that's the same behavior as ISD::FTRUNC,
so replace a pair of casts with the equivalent node. We don't have to account for
special cases (NaN, INF) because out-of-range casts are undefined.
Differential Revision: https://reviews.llvm.org/D44909
llvm-svn: 328921
The code has bugs dealing with -0.0.
Since D44550 introduced FABS pattern folding in InstCombine,
this patch removes the now-redundant code that causes
https://bugs.llvm.org/show_bug.cgi?id=36600.
Patch by Mikhail Dvoretckii!
Differential Revision: https://reviews.llvm.org/D44683
llvm-svn: 328872
Currently EVT is in the IR layer only because of Function.cpp needing a very small piece of the functionality of EVT::getEVTString(). The rest of EVT is used in codegen making CodeGen a better place for it.
The previous code converted a Type* to EVT and then called getEVTString. This was only expected to handle the primitive types from Type*. Since there only a few primitive types, we can just print them as strings directly.
Differential Revision: https://reviews.llvm.org/D45017
llvm-svn: 328806
This is used by llvm tblgen as well as by LLVM Targets, so the only
common place is Support for now. (maybe we need another target for these
sorts of things - but for now I'm at least making them correct & we can
make them better if/when people have strong feelings)
llvm-svn: 328395
In our real world application, we found the following optimization is missed in DAGCombiner
(zext (and/or/xor (shl/shr (load x), cst), cst)) -> (and/or/xor (shl/shr (zextload x), (zext cst)), (zext cst))
If the user of original zext is an add, it may enable further lea optimization on x86.
This patch add a new function CombineZExtLogicopShiftLoad to do this optimization.
Differential Revision: https://reviews.llvm.org/D44402
llvm-svn: 328252
I had to modify the bswap recognition to allow unshrunk masks to make this work.
Fixes PR36689.
Differential Revision: https://reviews.llvm.org/D44442
llvm-svn: 327530
BUILD_VECTORs aren't themselves legalized until LegalizeDAG so we should still be able to create an "illegal" one before that. This helps combine with BUILD_VECTORS that are introduced during LegalizeVectorOps due to unrolling.
llvm-svn: 327446
Under some circumstances the divrems won't have been combined together before getting to this code.
So replace the assertion with a if() guard to not expand to X-((X/C)*C) to give the other combine chance to happen.
Reduced from OSS-Fuzz #6883https://bugs.chromium.org/p/oss-fuzz/issues/detail?id=6883
llvm-svn: 327424
Loading a constant into a k-register in AVX512 requires a bitcast from a scalar constant. In the test case here we have a k-register store that gets split into multiple parts of KNL. MergeConsecutiveStores sees each of these pieces as a consecutive store and looks through the bitcast to find the underly scalar constant. But when we went to create the combined store we didn't look through the same bitcast.
llvm-svn: 326677
Masking first, prevents the extend from being combine with loads. Its also interfering with some vXi1 extraction code.
Differential Revision: https://reviews.llvm.org/D42679
llvm-svn: 326500
Summary:
There are transformation that change setcc into other constructs, and transform that try to reconstruct a setcc from the brcond condition. Depending on what order these transform are done, the end result differs.
Most of the time, it is preferable to get a setcc as a brcond argument (and this is why brcond try to recreate the setcc in the first place) so we ensure this is done every time by also doing it at the setcc level when the only user is a brcond.
Reviewers: spatel, hfinkel, niravd, craig.topper
Subscribers: nhaehnle, llvm-commits
Differential Revision: https://reviews.llvm.org/D41235
llvm-svn: 325892
This allows us to improve vector constant matching in more DAG code (backends, TargetLowering etc.).
Differential Revision: https://reviews.llvm.org/D43466
llvm-svn: 325815
We looked through a BITCAST, but the bitcast might be a from a scalar type rather than a vector.
I don't have a test case. I stumbled onto it while prototyping another change that isn't ready yet.
llvm-svn: 325750
DAGCombiner and SimplifySetCC both use getPointerTy for shift amounts pre-legalization. DAGCombiner uses a single helper function to hide this. SimplifySetCC does it in multiple places.
This patch adds a defaulted parameter to getShiftAmountTy that can make it return getPointerTy for scalar types. Use this parameter to simplify the SimplifySetCC and DAGCombiner.
Additionally, there were two places in SimplifySetCC that were creating shifts using the target's preferred shift amount pre-legalization. If the target uses a narrow type and the type is illegal, this can cause SimplfiySetCC to create a shift with an amount that can't represent all possible shift values for the type. To fix this we should use pointer type there too.
Alternatively we could make getScalarShiftAmountTy for each target return a safe value for large types as proposed in D43445. And maybe we should still do that, but fixing the SimplifySetCC code keeps other targets from tripping over this in the future.
Fixes PR36250.
Differential Revision: https://reviews.llvm.org/D43449
llvm-svn: 325602
Same for the sign extend case.
Currently we check for multiple uses on the binop. Then we call ExtendUsesToFormExtLoad to capture SetCCs that use the load. So we only end up finding any setccs when the and has additional uses and the load is used by a setcc. I don't think the and having multiple uses is relevant here. I think we should only be checking for the load having multiple uses.
This changes an NVPTX test because we now find that the load has a second use by a truncate, but ExtendUsesToFormExtLoad only looks at setccs it can extend. All other operations just check isTruncateFree. Maybe we should allow widening of an existing truncate even if its not free?
Differential Revision: https://reviews.llvm.org/D43063
llvm-svn: 325289
This is mainly a move of simplifyShuffleOperands from DAGCombiner::visitVECTOR_SHUFFLE to create a more general purpose TargetLowering::SimplifyDemandedVectorElts implementation.
Further features can be moved/added in future patches.
Differential Revision: https://reviews.llvm.org/D42896
llvm-svn: 325232
When creating high MachineMemOperand for MSTORE/MLOAD we supply
it with the original PointerInfo, while the pointer itself had been incremented.
The patch adds the proper offset to the PointerInfo.
llvm-svn: 325135
Summary:
If the and has an additional use we shouldn't invert it. That creates an additional instruction.
While there add a one use check to the transform above that looked similar.
Reviewers: spatel, RKSimon
Reviewed By: RKSimon
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D43225
llvm-svn: 325019
This allows us to recognise more saturation patterns and also simplify some MINMAX codegen that was failing to combine CMPGE comparisons to a legal CMPGT.
Differential Revision: https://reviews.llvm.org/D43014
llvm-svn: 324837
SelectionDAG::getBoolConstant was recently introduced. At the time I didn't know getConstTrueVal existed, but I think getBoolConstant is better as it will use the source VT to make sure it can properly detect floating point if it is configured differently.
llvm-svn: 324832
We're passing the binary op that uses the load instead of the load.
Noticed by inspection. Not sure how to test this because this just prevents the introduction of an extend that will later be truncated and will probably be combined out.
llvm-svn: 324568
The truncate is being used to replace other users of of the load, but we checked that the load only has one use so there are no other uses to replace.
llvm-svn: 324567
The truncate is only needed if the load has additional users. It used to get passed to extendSetCCUses so was created early, but that's no longer the case.
llvm-svn: 324562
X86 currently has a late DAG combine after cttz/ctlz are turned into BSR+BSF+CMOV to detect this and remove the CMOV. But we should be able to do this much earlier and avoid creating the cmov all together.
For the changed AMDGPU test case it appears that previously the i8 cttz was type legalized to i16 which introduced an OR with 256 in order to limit the result to 8 on the widened type. At this point the result is known to never be zero, but nothing checked that. Then operation legalization is told to promote all i16 cttz to i32. This introduces an extend and a truncate and another OR with 65536 to limit the result to 16. With the DAG combiner change we are able to prevent the creation of the second OR since the opcode will have been changed to cttz_zero_undef after the first OR. I the lack of the OR caused the instruction to change to v_ffbl_b32_sdwa
Differential Revision: https://reviews.llvm.org/D42985
llvm-svn: 324427
Summary:
This method is trying to use the truncate node to find which SETCC operand should be replaced directly with the extended load.
This used to work correctly because all uses of the original load were replaced by the truncate before this function was called. So this was used to effectively bypass the truncate and find the load under it.
All but one of the callers now call this before the truncate has replaced the laod so the setcc doesn't yet use the truncate. To account for this we should pass the original load instead.
I changed the order of that one caller to make this work there too.
I don't have a test case because this is probably hidden by later DAG combines causing the extend and truncate to cancel out. I assume this way is a little more efficient and matches what was originally intended.
Reviewers: RKSimon, spatel, niravd
Reviewed By: niravd
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D42878
llvm-svn: 324311
Summary:
If the load is already an extended load we should be using the memory VT for the legality check, not just the VT of the current extension.
I don't have a test case, just noticed it while investigating some load extension improvements.
Reviewers: RKSimon, spatel, niravd
Reviewed By: niravd
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D42783
llvm-svn: 324181
We were only checking the element count, but not the total width. This could cause illegal bitcasts to be created if for example the output was 512-bits, but N1 is 256 bits, and the extraction size was 128-bits.
Fixes PR36199
Differential Revision: https://reviews.llvm.org/D42809
llvm-svn: 324002
As shown in the example in PR34994:
https://bugs.llvm.org/show_bug.cgi?id=34994
...we can return a very wrong answer (inf instead of 0.0) for square root when
using a reciprocal square root estimate instruction.
Here, I've conditionalized the filtering out of denorms based on the function
having "denormal-fp-math"="ieee" in its attributes. The other options for this
attribute are 'preserve-sign' and 'positive-zero'.
So we don't generate this extra code by default with just '-ffast-math' (because
then there's no denormal attribute string at all), but it works if you specify
'-ffast-math -fdenormal-fp-math=ieee' from clang.
As noted in the review, there may be other problems in clang that affect the
results depending on platform (Linux x86 at least), but this should allow
creating the desired codegen.
Differential Revision: https://reviews.llvm.org/D42323
llvm-svn: 323981
Summary:
There's a check in the code to only check getSetCCResultType after LegalOperations or if the type is MVT::i1. But the i1 check is only allowing scalar types through. I think it should check that the scalar type is MVT::i1 so that it will work for vectors.
The changed test already does this combine with AVX512VL where getSetCCResultType returns vXi1. But with avx512f and no VLX getSetCCResultType returns a type matching the width of the input type.
Reviewers: spatel, RKSimon
Reviewed By: spatel
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D42619
llvm-svn: 323631
For the included test case, the DAG transformation
concat_vectors(scalar, undef) -> scalar_to_vector(sclr)
would attempt to create a v2i32 vector for a v9i8
concat_vector. Bail out to avoid creating a bitcast with
mismatching sizes later on.
Differential Revision: https://reviews.llvm.org/D42379
llvm-svn: 323312
For example, a build_vector of i64 bitcasted from v2i32 can be turned into a concat_vectors of the v2i32 vectors with a bitcast to a vXi64 type
Differential Revision: https://reviews.llvm.org/D42090
llvm-svn: 322811
Summary:
Fold cases such as:
(v8i8 truncate (v8i32 extract_subvector (v16i32 sext (v16i8 V), Idx)))
->
(v8i8 extract_subvector (v16i8 V), Idx)
This can be generalized to cases where the truncate and extend do not
fully cancel each other out, but it may require querying the target
about profitability.
Reviewers: RKSimon, craig.topper, spatel, efriedma
Reviewed By: RKSimon
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D41927
llvm-svn: 322300
Currently we infer the scale at isel time by analyzing whether the base is a constant 0 or not. If it is we assume scale is 1, else we take it from the element size of the pass thru or stored value. This seems a little weird and I think it makes more sense to make it explicit in the DAG rather than doing tricky things in the backend.
Most of this patch is just making sure we copy the scale around everywhere.
Differential Revision: https://reviews.llvm.org/D40055
llvm-svn: 322210
Handle this in DAGCombiner::visitEXTRACT_VECTOR_ELT the same as we already do in SelectionDAG::getNode and use APInt instead of getZExtValue.
This should also fix oss-fuzz #4910
llvm-svn: 321767
Our internal testing has revealed has discovered bugs in PPC builds.
I have forward reproduction instructions to the original author (Nirav).
llvm-svn: 321649
For example, float operations may fail to constant fold under certain circumstances (inf/nan/denormal creation etc.)
Reduced from oss-fuzz #4802 test case
llvm-svn: 321488
This moves the combine for turning ANDs into shuffle with zero out of SimplifyVBinOps and places it only in visitAND below the reassociate handling. This fixes the specific case I noticed where we failed to combine two ands with constants.
llvm-svn: 321417
getOperand returns an SDValue that contains the node and the result number. There is no guarantee that the result number if 0. By using the -> operator we are calling SDNode::getValueType rather than SDValue::getValueType. This requires supplying a result number and we shouldn't assume it was 0.
I don't have a test case. Just noticed while cleaning up some other code and saw that it occurred in other places.
llvm-svn: 321397
BaseIndexOffset supercedes findBaseOffset analysis save only Constant
Pool addresses. Migrate analysis to BaseIndexOffset.
Relanding after correcting base address matching check.
llvm-svn: 321389
The knownbits_mask_or_shuffle_uitofp change is interesting - shuffle combines manage to kick in, removing the AND constant mask load. For targets with fast-variable-shuffle this should reduce further to VPOR+VPSHUFB+VCVTDQ2PS.
llvm-svn: 321279
If the SRL node is only used by an AND, we may be able to set the
ExtVT to the width of the mask, making the AND redundant. To support
this, another check has been added in isLegalNarrowLoad which queries
whether the load is valid.
Differential Revision: https://reviews.llvm.org/D41350
llvm-svn: 321259
Summary:
Extend overlapping store elision to handle overwrites of stores by
larger stores.
Nontemporal tests have been modified to add memory dependencies to
prevent store elision.
Reviewers: craig.topper, rnk, t.p.northover
Subscribers: javed.absar, hiraditya, llvm-commits
Differential Revision: https://reviews.llvm.org/D40969
llvm-svn: 321089
Search from AND nodes to find whether they can be propagated back to
loads, so that the AND and load can be combined into a narrow load.
We search through OR, XOR and other AND nodes and all bar one of the
leaves are required to be loads or constants. The exception node then
needs to be masked off meaning that the 'and' isn't removed, but the
loads(s) are narrowed still.
Differential Revision: https://reviews.llvm.org/D41177
llvm-svn: 320962
Recommitting rL319773, which was reverted due to a recursive issue
causing timeouts. This happened because I failed to check whether
the discovered loads could be narrowed further. In the case of a tree
with one or more narrow loads, that could not be further narrowed, as
well as a node that would need masking, an AND could be introduced
which could then be visited and recombined again with the same load.
This could again create the masking load, with would be combined
again... We now check that the load can be narrowed so that this
process stops.
Original commit message:
Search from AND nodes to find whether they can be propagated back to
loads, so that the AND and load can be combined into a narrow load.
We search through OR, XOR and other AND nodes and all bar one of the
leaves are required to be loads or constants. The exception node then
needs to be masked off meaning that the 'and' isn't removed, but the
loads(s) are narrowed still.
Differential Revision: https://reviews.llvm.org/D41177
llvm-svn: 320679
At first, I tried to thread the x86 needle and use a target hook (isVectorShiftByScalarCheap())
to disable the transform only for non-splat pow-of-2 constants, but not AVX2, but only some
element types, but...it's difficult.
Here we just avoid the loop with the x86 vector transform that conflicts with the general DAG
combine and preserve all of the existing behavior AFAICT otherwise.
Some tests that will probably fail if someone does try to restrict this in a more targeted way
for x86-only may be found in:
test/CodeGen/X86/combine-mul.ll
test/CodeGen/X86/vector-mul.ll
test/CodeGen/X86/widen_arith-5.ll
This should prevent the infinite looping seen with:
https://bugs.llvm.org/show_bug.cgi?id=35579
Differential Revision: https://reviews.llvm.org/D41040
llvm-svn: 320374
This commit is the first part of https://reviews.llvm.org/D40348.
In order to allow target combines to be performed on newly combined
indexed loads, add them back to the worklist. The remainder of the
above patch will be committed in subsequent revisions and will use
this. Test cases will be included with those follow-up commits.
llvm-svn: 320365
This is a preparatory step for D34515.
This change:
- makes nodes ISD::ADDCARRY and ISD::SUBCARRY legal for i32
- lowering is done by first converting the boolean value into the carry flag
using (_, C) ← (ARMISD::ADDC R, -1) and converted back to an integer value
using (R, _) ← (ARMISD::ADDE 0, 0, C). An ARMISD::ADDE between the two
operations does the actual addition.
- for subtraction, given that ISD::SUBCARRY second result is actually a
borrow, we need to invert the value of the second operand and result before
and after using ARMISD::SUBE. We need to invert the carry result of
ARMISD::SUBE to preserve the semantics.
- given that the generic combiner may lower ISD::ADDCARRY and
ISD::SUBCARRYinto ISD::UADDO and ISD::USUBO we need to update their lowering
as well otherwise i64 operations now would require branches. This implies
updating the corresponding test for unsigned.
- add new combiner to remove the redundant conversions from/to carry flags
to/from boolean values (ARMISD::ADDC (ARMISD::ADDE 0, 0, C), -1) → C
- fixes PR34045
- fixes PR34564
- fixes PR35103
Differential Revision: https://reviews.llvm.org/D35192
llvm-svn: 320355
I noticed this pattern in D38316 / D38388. We failed to combine a shuffle that is either
repeating a scalar insertion at the same position in a vector or translated to a different
element index.
Like the earlier patch, this could be an instcombine too, but since we opted to make this
a DAG transform earlier, I've made this one a DAG patch too.
We do not need any legality checking because the new insert is identical to the existing
insert except that it may have a different constant insertion operand.
The constant insertion test in test/CodeGen/X86/vector-shuffle-combining.ll was the
motivation for D38756.
Differential Revision: https://reviews.llvm.org/D40209
llvm-svn: 320050
Search from AND nodes to find whether they can be propagated back to
loads, so that the AND and load can be combined into a narrow load.
We search through OR, XOR and other AND nodes and all bar one of the
leaves are required to be loads or constants. The exception node then
needs to be masked off meaning that the 'and' isn't removed, but the
loads(s) are narrowed still.
Differential Revision: https://reviews.llvm.org/D39604
llvm-svn: 319773
Summary:
Found out, at code inspection, that there was a fault in
DAGCombiner::CombineConsecutiveLoads for big-endian targets.
A BUILD_PAIR is always having the least significant bits of
the composite value in element 0. So when we are doing the checks
for consecutive loads, for big endian targets, we should check
if the load to elt 1 is at the lower address and the load
to elt 0 is at the higher address.
Normally this bug only resulted in missed oppurtunities for
doing the load combine. I guess that in some rare situation it
could lead to faulty combines, but I've not seen that happen.
Note that this patch actually will trigger load combine for
some big endian regression tests.
One example is test/CodeGen/PowerPC/anon_aggr.ll where we now get
t76: i64,ch = load<LD8[FixedStack-9]
instead of
t37: i32,ch = load<LD4[FixedStack-10]>
t35: i32,ch = load<LD4[FixedStack-9]>
t41: i64 = build_pair t37, t35
before legalization. Then the legalization will split the LD8
into two loads, so the end result is the same. That should
verify that the transfomation is correct now.
Reviewers: niravd, hfinkel
Reviewed By: niravd
Subscribers: nemanjai, llvm-commits
Differential Revision: https://reviews.llvm.org/D40444
llvm-svn: 319771
Pull the checks upon the load out from ReduceLoadWidth into their own
function.
Differential Revision: https://reviews.llvm.org/D40833
llvm-svn: 319766
MatchRotate assumes the types of the types of LHS and RHS are equal,
which is always the case then they come from an OR node, but here
we're getting them from two different TRUNC nodes, so we have to check
the types.
llvm-svn: 319695
If the truncation has been pushed past the or-node, look through it and
truncate afterwards.
Differential revision: https://reviews.llvm.org/D40792
llvm-svn: 319692
Both LoadedVT and NarrowLoad are passed as references and neither
of them are used by any of its callers.
Differential Revision: https://reviews.llvm.org/D40713
llvm-svn: 319645
visitAND attempts to narrow the width of extending loads that are
then masked off. ReduceLoadWidth already exists for a similar purpose
and handles shifts, so I've moved the code to handle AND nodes there.
Differential Revision: https://reviews.llvm.org/D39595
llvm-svn: 319421
This is needed for cases when the memory access is not as big as the width of
the data type. For instance, storing i1 (1 bit) would be done in a byte (8
bits).
Using 'BitSize >> 3' (or '/ 8') would e.g. give the memory access of an i1 a
size of 0, which for instance makes alias analysis return NoAlias even when
it shouldn't.
There are no tests as this was done as a follow-up to the bugfix for the case
where this was discovered (r318824). This handles more similar cases.
Review: Björn Petterson
https://reviews.llvm.org/D40339
llvm-svn: 319173
Unoptimized IR can have linear sequences of stores to an array, where the
initial GEP for the first store is formed from the pointer to the array, and the
GEP for each store after the first is formed from the previous GEP with some
offset in an inductive fashion.
The (large) resulting DAG when analyzed by DAGCombine undergoes an excessive
number of combines as each store node is examined every time its' offset node
is combined with any child of the offset. One of the transformations is
findBetterNeighborChains which assists MergeConsecutiveStores. The former
relies on repeated chain walking to do its' work, however MergeConsecutiveStores
is disabled at O0 which makes the transformation redundant.
Any optimization level other than O0 would invoke InstCombine which would
resolve the chain of GEPs into flat base + offset GEP for each store which
does not exhibit the repeated examination of each store to the array.
Disabling this optimization fixes an excessive compile time issue (30~ minutes
for the test case provided) at O0.
Reviewers: niravd, craig.topper, t.p.northover
Differential Revision: https://reviews.llvm.org/D40193
llvm-svn: 319142
With AVX512 vXi1 types are legal so we shouldn't be extending them.
This change is similar to existing code in the zext(setcc) combine.
llvm-svn: 319120
Since i1 is a legal type, this:
NumBytes = Op1->getMemoryVT().getSizeInBits() >> 3;
is wrong and should be instead
NumBytes = Op0->getMemoryVT().getStoreSize();
There seems to be more places where this should be fixed outside DAGCombiner.
Review: Hal Finkel
https://bugs.llvm.org/show_bug.cgi?id=35366
llvm-svn: 318824
All these headers already depend on CodeGen headers so moving them into
CodeGen fixes the layering (since CodeGen depends on Target, not the
other way around).
llvm-svn: 318490
Change the calculation for the desired ValueType for non-sign
extending loads, as in those cases we don't care about the
higher bits. This creates a smaller ExtVT and allows for such
combinations as:
(srl (zextload i16, [addr]), 8) -> (zextload i8, [addr + 1])
Differential Revision: https://reviews.llvm.org/D40034
llvm-svn: 318390
In function DAGCombiner::visitSIGN_EXTEND_INREG, sext can be combined with extload even if sextload is not supported by target, then
if sext is the only user of extload, there is no big difference, no harm no benefit.
if extload has more than one user, the combined sextload may block extload from combining with other zext, causes extra zext instructions generated. As demonstrated by the attached test case.
This patch add the constraint that when sextload is not supported by target, sext can only be combined with extload if it is the only user of extload.
Differential Revision: https://reviews.llvm.org/D39108
llvm-svn: 316802
combineShuffleOfScalars is very conservative about shuffled BUILD_VECTORs that can be combined together.
This patch adds one additional case - if both BUILD_VECTORs represent splats of the same scalar value but with different UNDEF elements, then we should create a single splat BUILD_VECTOR, sharing only the UNDEF elements defined by the shuffle mask.
Differential Revision: https://reviews.llvm.org/D38696
llvm-svn: 316331
This is only currently used for mad/fma transforms.
This is the only case where it should be used for AMDGPU,
so add an opcode to be sure.
llvm-svn: 315740
Eg:
insert v4i32 V, (v2i16 X), 2 --> shuffle v8i16 V', X', {0,1,2,3,8,9,6,7}
This is a generalization of the IR fold in D38316 to handle insertion into a non-undef vector.
We may want to abandon that one if we can't find value in squashing the more specific pattern sooner.
We're using the existing legal shuffle target hook to avoid AVX512 horror with vXi1 shuffles.
There may be room for improvement in the shuffle lowering here, but that would be follow-up work.
Differential Revision: https://reviews.llvm.org/D38388
llvm-svn: 315460
Summary:
See https://llvm.org/PR33743 for more details
It seems that for non-power of 2 vector sizes, the algorithm can produce
non-matching sizes for input and result causing an assert.
This usually isn't a problem as the isAnyExtend check will weed these out, but
in some cases (most often with lots of undefined values for the mask indices) it
can pass this check for non power of 2 vectors.
Adding in an extra check that ensures that bit size will match for the result
and input (as required)
Subscribers: nhaehnle
Differential Revision: https://reviews.llvm.org/D35241
llvm-svn: 315307
Without this, we could end up trying to get the Nth (0-indexed) element
from a subvector of size N.
Differential Revision: https://reviews.llvm.org/D37880
llvm-svn: 314380
At least for the 64-bit and less case, we should be able to determine if we even have a mask without counting any bits. This also removes the need to explicitly check for 0 active bits, isMask will return false for 0.
llvm-svn: 313908
If we have an AssertZext of a truncated value that has already been AssertZext'ed,
we can assert on the wider source op to improve the zext-y knowledge:
assert (trunc (assert X, i8) to iN), i1 --> trunc (assert X, i1) to iN
This moves a fold from being Mips-specific to general combining, and x86 shows
improvements.
Differential Revision: https://reviews.llvm.org/D37017
llvm-svn: 313577
rL310710 allowed store merging to occur after legalization to catch stores that are created late,
but this exposes a logic hole seen in PR34217:
https://bugs.llvm.org/show_bug.cgi?id=34217
We will miss merging stores if the target lowers vector extracts into target-specific operations.
This patch allows store merging to occur both before and after legalization if the target chooses
to get maximum merging.
I don't think the potential regressions in the other tests are relevant. The tests are for
correctness of weird IR constructs rather than perf tests, and I think those are still correct.
Differential Revision: https://reviews.llvm.org/D37987
llvm-svn: 313564
We already have a combine for this pattern when the input to shl is add, so we just need to enable the transformation when the input is or.
Original patch by @tstellar
Differential Revision: https://reviews.llvm.org/D19325
llvm-svn: 313251
Fixes some combine issues for AMDGPU where we weren't
getting the many extract_vector_elt combines expected
in a future patch.
This should really be checking isOperationLegalOrCustom on
the extract. That improves a number of x86 lit tests, but
a few get stuck in an infinite loop from one place
where a similar looking extract is created. I have a
different workaround in the backend for that which
keeps many of those improvements, but also adds a few
regressions.
llvm-svn: 312730
The function combineShuffleToVectorExtend in DAGCombine might generate an illegal typed node after "legalize types" phase, causing assertion on non-simple type to fail afterwards.
Adding a type check in case the combine is running after the type legalize pass.
Differential Revision: https://reviews.llvm.org/D37330
llvm-svn: 312438
The loop dependence check looks for dependencies between store merge
candidates not captured by the chain sub-DAG doing a check of
predecessors which may be very large. Conservatively bound number of
nodes checked for compilation time. (Resolves PR34326).
Landing on behalf of Nirav Dave to unblock the 5.0.0 release.
Differential Revision: https://reviews.llvm.org/D37220
llvm-svn: 312022
Only do this before operations are legalized of BUILD_VECTOR is Legal for the target.
Differential Revision: https://reviews.llvm.org/D37186
llvm-svn: 311892
Summary:
If all the operands of a BUILD_VECTOR extract elements from same vector then split the
vector efficiently based on the maximum vector access index.
This will also fix PR 33784
Reviewers: zvi, delena, RKSimon, thakis
Reviewed By: RKSimon
Subscribers: chandlerc, eladcohen, llvm-commits
Differential Revision: https://reviews.llvm.org/D35788
llvm-svn: 311833
This goes back to a discussion about IR canonicalization. We'd like to preserve and convert
more IR to 'select' than we currently do because that's likely the best choice in IR:
http://lists.llvm.org/pipermail/llvm-dev/2016-September/105335.html
...but that's often not true for codegen, so we need to account for this pattern coming in
to the backend and transform it to better DAG ops.
Steps in this patch:
1. Add an EVT param to the existing convertSelectOfConstantsToMath() TLI hook to more finely
enable this transform. Other targets will probably want that anyway to distinguish scalars
from vectors. We're using that here to exclude AVX512 targets, but it may not be necessary.
2. Convert a vselect to ext+add. This eliminates a constant load/materialization, and the
vector ext is often free.
Implementing a more general fold using xor+and can be a follow-up for targets that don't have
a legal vselect. It's also possible that we can remove the TLI hook for the special case fold
implemented here because we're eliminating a constant, but it needs to be tested on other
targets.
Differential Revision: https://reviews.llvm.org/D36840
llvm-svn: 311731
When one operand is a user of another in a promoted binary operation
we may replace and delete the returned value before returning
triggering an assertion. Reorder node replacements to prevent this.
Fixes PR34137.
Landing on behalf of Nirav.
Differential Revision: https://reviews.llvm.org/D36581
llvm-svn: 311623
This partially reverts r311429 in favor of making ISD::isConstantSplatVector do something not confusing. Turns out the only other user of it was also having to deal with the weird property of it returning a smaller size.
So rather than continue to deal with this quirk everywhere, just make the interface do something sane.
Differential Revision: https://reviews.llvm.org/D37039
llvm-svn: 311510
Summary:
If all the operands of a BUILD_VECTOR extract elements from same vector then split the
vector efficiently based on the maximum vector access index.
Reviewers: zvi, delena, RKSimon, thakis
Reviewed By: RKSimon
Subscribers: chandlerc, eladcohen, llvm-commits
Differential Revision: https://reviews.llvm.org/D35788
llvm-svn: 311255
Summary: It is creating useless work as the commuted nodes is the same as the node we are working on in that case.
Reviewers: jyknight, nemanjai, mkuper, spatel, RKSimon, zvi, bkramer
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D33840
llvm-svn: 310832
Summary:
Without the SrcVT its hard to know what is really being asked for. For example if your target has 128, 256, and 512 bit vectors. Maybe extracting 128 from 256 is cheap, but maybe extracting 128 from 512 is not.
For x86 we do support extracting a quarter of a 512-bit register. But for i1 vectors we don't have isel patterns for extracting arbitrary pieces. So we need this to have a correct implementation of isExtractSubvectorCheap for mask vectors.
Reviewers: RKSimon, zvi, efriedma
Reviewed By: RKSimon
Subscribers: aemerson, javed.absar, kristof.beyls, llvm-commits
Differential Revision: https://reviews.llvm.org/D36649
llvm-svn: 310793
If all the operands of a BUILD_VECTOR extract elements from same vector then split the vector efficiently based on the maximum vector access index.
Reapplied with fix to only work with simple value types.
Committed on behalf of @jbhateja (Jatin Bhateja)
Differential Revision: https://reviews.llvm.org/D35788
llvm-svn: 310782
The previous rev (r310208) failed to account for overflow when subtracting the
constants to see if they're suitable for shift/lea. This version add a check
for that and more test were added in r310490.
We can convert any select-of-constants to math ops:
http://rise4fun.com/Alive/d7d
For this patch, I'm enhancing an existing x86 transform that uses fake multiplies
(they always become shl/lea) to avoid cmov or branching. The current code misses
cases where we have a negative constant and a positive constant, so this is just
trying to plug that hole.
The DAGCombiner diff prevents us from hitting a terrible inefficiency: we can start
with a select in IR, create a select DAG node, convert it into a sext, convert it
back into a select, and then lower it to sext machine code.
Some notes about the test diffs:
1. 2010-08-04-MaskedSignedCompare.ll - We were creating control flow that didn't exist in the IR.
2. memcmp.ll - Choose -1 or 1 is the case that got me looking at this again. We could avoid the
push/pop in some cases if we used 'movzbl %al' instead of an xor on a different reg? That's a
post-DAG problem though.
3. mul-constant-result.ll - The trade-off between sbb+not vs. setne+neg could be addressed if
that's a regression, but those would always be nearly equivalent.
4. pr22338.ll and sext-i1.ll - These tests have undef operands, so we don't actually care about these diffs.
5. sbb.ll - This shows a win for what is likely a common case: choose -1 or 0.
6. select.ll - There's another borderline case here: cmp+sbb+or vs. test+set+lea? Also, sbb+not vs. setae+neg shows up again.
7. select_const.ll - These are motivating cases for the enhancement; replace cmov with cheaper ops.
Assembly differences between movzbl and xor to avoid a partial reg stall are caused later by the X86 Fixup SetCC pass.
Differential Revision: https://reviews.llvm.org/D35340
llvm-svn: 310717
rL310372 enabled simplifyShuffleMask to support undef shuffle mask inputs, but its causing hangs.
Removing support until I can triage the problem
llvm-svn: 310699
Relanding after case to insert explicit truncation as necessary.
Allow SCALAR_TO_VECTOR of EXTRACT_VECTOR_ELT to reduce to
EXTRACT_SUBVECTOR of vector shuffle when output is smaller. Marginally
improves vector shuffle computations.
Reviewers: efriedma, RKSimon, spatel
Subscribers: javed.absar, llvm-commits
Differential Revision: https://reviews.llvm.org/D35566
llvm-svn: 310256
We can convert any select-of-constants to math ops:
http://rise4fun.com/Alive/d7d
For this patch, I'm enhancing an existing x86 transform that uses fake multiplies
(they always become shl/lea) to avoid cmov or branching. The current code misses
cases where we have a negative constant and a positive constant, so this is just
trying to plug that hole.
The DAGCombiner diff prevents us from hitting a terrible inefficiency: we can start
with a select in IR, create a select DAG node, convert it into a sext, convert it
back into a select, and then lower it to sext machine code.
Some notes about the test diffs:
1. 2010-08-04-MaskedSignedCompare.ll - We were creating control flow that didn't exist in the IR.
2. memcmp.ll - Choose -1 or 1 is the case that got me looking at this again. I
think we could avoid the push/pop in some cases if we used 'movzbl %al' instead of an xor on
a different reg? That's a post-DAG problem though.
3. mul-constant-result.ll - The trade-off between sbb+not vs. setne+neg could be addressed if
that's a regression, but I think those would always be nearly equivalent.
4. pr22338.ll and sext-i1.ll - These tests have undef operands, so I don't think we actually care about these diffs.
5. sbb.ll - This shows a win for what I think is a common case: choose -1 or 0.
6. select.ll - There's another borderline case here: cmp+sbb+or vs. test+set+lea? Also, sbb+not vs. setae+neg shows up again.
7. select_const.ll - These are motivating cases for the enhancement; replace cmov with cheaper ops.
Assembly differences between movzbl and xor to avoid a partial reg stall are caused later by the X86 Fixup SetCC pass.
Differential Revision: https://reviews.llvm.org/D35340
llvm-svn: 310208
If all the operands of a BUILD_VECTOR extract elements from same vector then split the vector efficiently based on the maximum vector access index.
Committed on behalf of @jbhateja (Jatin Bhateja)
Differential Revision: https://reviews.llvm.org/D35788
llvm-svn: 310058
During store merge we construct a sorted list of consecutive store
candidates and consider subsequences for merging into a single
store. For each subsequence we check if the stored value type is legal
the merged store would have valid and fast and if the constructed
value to be stored is valid. The only properties that affect this
check between subsequences is the size of the subsequence, the
alignment of the first store, the alignment of the stored load value
(when merging stores-of-loads), and whether the merged value is a
constant zero.
If we do not find a viable mergeable subsequence starting from the
first store of length N, we know that a subsequence starting at a
later store of length N will also fail unless the new store's
alignment, the new load's alignment (if we're merging store-of-loads),
or we've dropped stores of nonzero value and could construct a merged
stores of zero (for merging constants).
As a result if we fail to find a valid subsequence starting from the
first store we can safely skip considering subsequences that start
with subsequent stores unless one of the above properties is
true. This significantly (2x) improves compile time in some
pathological cases.
Reviewers: RKSimon, efriedma, zvi, spatel, waltl
Subscribers: grandinj, llvm-commits
Differential Revision: https://reviews.llvm.org/D35901
llvm-svn: 309830
This pattern shows up when lowering byval copies on AMDGPU.
The byval object access is split into 4-byte chunks, adding a
constant offset to the FixedStack base. When some of the offsets
turn into ors, this prevents combining the constant offsets.
This makes it not apparent that the object is there when matching
addressing modes, so it ends up using a scratch wave offset
relative access and the lengthy frame index expansion for that.
llvm-svn: 309775
This patch moves the DAGCombiner::GetDemandedBits function to SelectionDAG::GetDemandedBits as a first step towards making it easier for targets to get to the source of any demanded bits without the limitations of SimplifyDemandedBits.
Differential Revision: https://reviews.llvm.org/D35841
llvm-svn: 308983
Check the actual memory type stored and not the extended value size
when considering if truncated store merge is worthwhile.
Reviewers: efriedma, RKSimon, spatel, jyknight
Reviewed By: efriedma
Subscribers: llvm-commits, nhaehnle
Differential Revision: https://reviews.llvm.org/D35623
llvm-svn: 308833
Summary:
When pushing an extension of a constant bitwise operator on a load
into the load, change other uses of the load value if they exist to
prevent the old load from persisting.
Reviewers: spatel, RKSimon, efriedma
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D35030
llvm-svn: 308618
Most combines currently recognise scalar and splat-vector constants, but not non-uniform vector constants.
This patch introduces a matching mechanism that uses predicates to check against BUILD_VECTOR of ConstantSDNode, as well as scalar ConstantSDNode cases.
I've changed a couple of predicates to demonstrate - the combine-shl changes add currently unsupported cases, while the MatchRotate replaces an existing mechanism.
Differential Revision: https://reviews.llvm.org/D35492
llvm-svn: 308598
Re-recommiting after landing DAG extension-crash fix.
Recommiting after adding check to avoid miscomputing alias information
on addresses of the same base but different subindices.
Memory accesses offset from frame indices may alias, e.g., we
may merge write from function arguments passed on the stack when they
are contiguous. As a result, when checking aliasing, we consider the
underlying frame index's offset from the stack pointer.
Static allocs are realized as stack objects in SelectionDAG, but its
offset is not set until post-DAG causing DAGCombiner's alias check to
consider access to static allocas to frequently alias. Modify isAlias
to consider access between static allocas and access from other frame
objects to be considered aliasing.
Many test changes are included here. Most are fixes for tests which
indirectly relied on our aliasing ability and needed to be modified to
preserve their original intent.
The remaining tests have minor improvements due to relaxed
ordering. The exception is CodeGen/X86/2011-10-19-widen_vselect.ll
which has a minor degradation dispite though the pre-legalized DAG is
improved.
Reviewers: rnk, mkuper, jonpa, hfinkel, uweigand
Reviewed By: rnk
Subscribers: sdardis, nemanjai, javed.absar, llvm-commits
Differential Revision: https://reviews.llvm.org/D33345
llvm-svn: 308350
Reorder replacements to be user first in preparation for multi-level
folding to premptively avoid inadvertantly deleting later nodes from
sharing found from replacement.
llvm-svn: 308348
When replacing a node and it's operand, replacing the operand node may
cause the deletion of the original node leading to an assertion
failure. Case around these replacements to avoid this without relying
on inspecting the DELETED_NODE opcode in various extend
dagcombiner cases.
Fixes PR32515.
Reviewers: dbabokin, RKSimon, davide, chandlerc
Subscribers: chandlerc, llvm-commits
Differential Revision: https://reviews.llvm.org/D34095
llvm-svn: 308330
Recommiting after adding check to avoid miscomputing alias information
on addresses of the same base but different subindices.
Memory accesses offset from frame indices may alias, e.g., we
may merge write from function arguments passed on the stack when they
are contiguous. As a result, when checking aliasing, we consider the
underlying frame index's offset from the stack pointer.
Static allocs are realized as stack objects in SelectionDAG, but its
offset is not set until post-DAG causing DAGCombiner's alias check to
consider access to static allocas to frequently alias. Modify isAlias
to consider access between static allocas and access from other frame
objects to be considered aliasing.
Many test changes are included here. Most are fixes for tests which
indirectly relied on our aliasing ability and needed to be modified to
preserve their original intent.
The remaining tests have minor improvements due to relaxed
ordering. The exception is CodeGen/X86/2011-10-19-widen_vselect.ll
which has a minor degradation dispite though the pre-legalized DAG is
improved.
Reviewers: rnk, mkuper, jonpa, hfinkel, uweigand
Reviewed By: rnk
Subscribers: sdardis, nemanjai, javed.absar, llvm-commits
Differential Revision: https://reviews.llvm.org/D33345
llvm-svn: 308025
Reverting as it breaks tramp3d-v4 in the llvm test-suite. I added some
comments to https://reviews.llvm.org/D33345 about it.
This reverts commit r307546.
llvm-svn: 307589
Memory accesses offset from frame indices may alias, e.g., we
may merge write from function arguments passed on the stack when they
are contiguous. As a result, when checking aliasing, we consider the
underlying frame index's offset from the stack pointer.
Static allocs are realized as stack objects in SelectionDAG, but its
offset is not set until post-DAG causing DAGCombiner's alias check to
consider access to static allocas to frequently alias. Modify isAlias
to consider access between static allocas and access from other frame
objects to be considered aliasing.
Many test changes are included here. Most are fixes for tests which
indirectly relied on our aliasing ability and needed to be modified to
preserve their original intent.
The remaining tests have minor improvements due to relaxed
ordering. The exception is CodeGen/X86/2011-10-19-widen_vselect.ll
which has a minor degradation dispite though the pre-legalized DAG is
improved.
Reviewers: rnk, mkuper, jonpa, hfinkel, uweigand
Reviewed By: rnk
Subscribers: sdardis, nemanjai, javed.absar, llvm-commits
Differential Revision: https://reviews.llvm.org/D33345
llvm-svn: 307546
For two ROTR operations with shifts C1, C2; combined shift operand will be (C1 + C2) % bitsize.
Differential revision: https://reviews.llvm.org/D12833
llvm-svn: 307179
Summary:
Add a combine for creating a truncate to replace a build_vector composed of extracts with
indices that form a stride-2^N series.
Example:
v8i32 V = ...
v4i32 build_vector((extract_elt V, 0), (extract_elt V, 2), (extract_elt V, 4), (extract_elt V, 6))
-->
v4i32 truncate (bitcast V to v4i64)
Related discussion in llvm-dev about canonicalizing shuffles to
truncates in LLVM IR:
http://lists.llvm.org/pipermail/llvm-dev/2017-January/108936.html.
Reviewers: spatel, RKSimon, efriedma, igorb, craig.topper, wolfgangp, delena
Reviewed By: delena
Subscribers: guyblank, delena, javed.absar, llvm-commits
Differential Revision: https://reviews.llvm.org/D34077
llvm-svn: 307036
Relanding after restricting equalBaseIndex to not erroneuosly consider
a FrameIndices stemming from alloca from being comparable as its
offset is set post-selectionDAG.
Pull FrameIndex comparision reasoning from DAGCombiner::isAlias to
general BaseIndexOffset.
llvm-svn: 306688
Given no NaNs and no signed zeroes it folds:
(fmul X, (select (fcmp X > 0.0), -1.0, 1.0)) -> (fneg (fabs X))
(fmul X, (select (fcmp X > 0.0), 1.0, -1.0)) -> (fabs X)
Differential Revision: https://reviews.llvm.org/D34579
llvm-svn: 306592
That is pretty common for clang to produce code like
(shl %x, (and %amt, 31)). In this situation we can still perform
trunc (shl) into shl (trunc) conversion given the known value
range of shift amount.
Differential Revision: https://reviews.llvm.org/D34723
llvm-svn: 306499
When SelectionDAG merges consecutive stores and loads in MergeConsecutiveStores, it does not set dereferenceable flag for a created load instruction. This results in an assertion failure if SelectionDAG commonizes this load instruction with other load instructions, as well as it may miss optimization opportunities.
This patch sat dereferenceable flag for the newly created load instruction if all the load instructions to be merged are dereferenceable.
Differential Revision: https://reviews.llvm.org/D34679
llvm-svn: 306404
Move GlobalAddress Offset decomposition from initial match into
comparision check and removing the possibility of constructing a new
offseted global address when examining addresses.
llvm-svn: 305917
Add support for combining a build vector to a shuffle.
When the build vector is of extracted elements from 2 vectors (vec1, vec2) where vec2 is 2 times smaller than vec1.
llvm-svn: 305883
As all store merges checks are based on the memory operation
performed, allow use of truncated stores and extended loads as valid
input candidates for merging.
Relanding after fixing selection between truncated and normal store.
llvm-svn: 305701
In preparation for doing storemerge post-legalization, reorder
visitSTORE passes to move pre/post-index combining after store
merge. Reordered passes other than store merge are unaffected.
llvm-svn: 305473
As all store merges checks are based on the memory operation
performed, allow use of truncated stores and extended loads as valid
input candidates for merging.
llvm-svn: 305468
This step is just intended to reduce code duplication rather than change any functionality.
A follow-up would be to replace PPCTargetLowering::spliceIntoChain() usage with this new helper.
Differential Revision: https://reviews.llvm.org/D33649
llvm-svn: 305192
Summary: UADDO has 2 result, and one must check the result no before doing any kind of combine. Without it, the transform is invalid.
Reviewers: joerg
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D34088
llvm-svn: 305162
When considering merging stores values are the results of loads only
consider stores whose values come from loads from the same base.
This fixes much of the longer compile times in PR33330.
llvm-svn: 304934
Other calls to DAGCombiner::*PromoteOperand check the result, but here it could cause an assertion in getNode.
Falling back to any extend in this case instead of failing outright seems correct to me.
No test case because:
The failure was triggered by an out of tree backend. In order to trigger it, a backend would need to overload
TargetLowering::IsDesirableToPromoteOp to return true for a type for which ISD::SIGN_EXTEND_INREG is marked
illegal. In tree, only X86 overloads and sometimes returns true for MVT::i16 yet it marks
setOperationAction(ISD::SIGN_EXTEND_INREG, MVT::i16 , Legal);.
Patch by Jacob Young!
Differential Revision: https://reviews.llvm.org/D33633
llvm-svn: 304723
Summary:
This is a problem uncovered by stage2 testing. ADDCARRY end up being generated on target that do not support it.
The patch that introduced the problem has other patches layed on top of it, so we want to fix the issue rather than revert it to avoid creating a lor of churn.
A regression test will be added shortly, but this is committed as this in order to get the build back to green promptly.
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D33770
llvm-svn: 304409
Summary:
This is a continuation of the work started in D29872 . Passing the carry down as a value rather than as a glue allows for further optimizations. Introducing setcccarry makes the use of addc/subc unecessary and we can start the removal process.
This patch only introduce the optimization strictly required to get the same level of optimization as was available before nothing more.
Reviewers: jyknight, nemanjai, mkuper, spatel, RKSimon, zvi, bkramer
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D33374
llvm-svn: 304404
Summary: This pattern is no very useful per se, but it exposes optimization for toehr patterns that wouldn't kick in otherwize. It's very common and worth optimizing for.
Reviewers: jyknight, nemanjai, mkuper, spatel, RKSimon, zvi, bkramer
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D32756
llvm-svn: 304402
Correct references to alignment of store which may be deleted in a
previous iteration of merge. Instead use first store that would be
merged.
Corrects pr33172's use-after-poison caught by ASan.
Reviewers: spatel, hfinkel, RKSimon
Reviewed By: RKSimon
Subscribers: thegameg, javed.absar, llvm-commits
Differential Revision: https://reviews.llvm.org/D33686
llvm-svn: 304299
The extending load possibility was missed in:
https://reviews.llvm.org/rL304072
We might want to handle this cases as a follow-up, but bailing out for now
to avoid miscompiling.
llvm-svn: 304153
If we have (extract_subvector(load wide vector)) with no other users,
that can just be (load narrow vector). This is intentionally conservative.
Follow-ups may loosen the one-use constraint to account for the extract cost
or just remove the one-use check.
The memop chain updating is based on code that already exists multiple times
in x86 lowering, so that should be pulled into a helper function as a follow-up.
Background: this is a potential improvement noticed via regressions caused by
making x86's peekThroughBitcasts() not loop on consecutive bitcasts (see
comments in D33137).
Differential Revision: https://reviews.llvm.org/D33578
llvm-svn: 304072
In the best case:
extract (binop (concat X1, X2), (concat Y1, Y2)), N --> binop XN, YN
...we kill all of the extract/concat and just have narrow binops remaining.
If only one of the binop operands is amenable, this transform is still
worthwhile because we kill some of the extract/concat.
Optional bitcasting makes the code more complicated, but there doesn't
seem to be a way to avoid that.
The TODO about extending to more than bitwise logic is there because we really
will regress several x86 tests including madd, psad, and even a plain
integer-multiply-by-2 or shift-left-by-1. I don't think there's anything
fundamentally wrong with this patch that would cause those regressions; those
folds are just missing or brittle.
If we extend to more binops, I found that this patch will fire on at least one
non-x86 regression test. There's an ARM NEON test in
test/CodeGen/ARM/coalesce-subregs.ll with a pattern like:
t5: v2f32 = vector_shuffle<0,3> t2, t4
t6: v1i64 = bitcast t5
t8: v1i64 = BUILD_VECTOR Constant:i64<0>
t9: v2i64 = concat_vectors t6, t8
t10: v4f32 = bitcast t9
t12: v4f32 = fmul t11, t10
t13: v2i64 = bitcast t12
t16: v1i64 = extract_subvector t13, Constant:i32<0>
There was no functional change in the codegen from this transform from what I
could see though.
For the x86 test changes:
1. PR32790() is the closest call. We don't reduce the AVX1 instruction count in that case,
but we improve throughput. Also, on a core like Jaguar that double-pumps 256-bit ops,
there's an unseen win because two 128-bit ops have the same cost as the wider 256-bit op.
SSE/AVX2/AXV512 are not affected which is expected because only AVX1 has the extract/concat
ops to match the pattern.
2. do_not_use_256bit_op() is the best case. Everyone wins by avoiding the concat/extract.
Related bug for IR filed as: https://bugs.llvm.org/show_bug.cgi?id=33026
3. The SSE diffs in vector-trunc-math.ll are just scheduling/RA, so nothing real AFAICT.
4. The AVX1 diffs in vector-tzcnt-256.ll are all the same pattern: we reduced the instruction
count by one in each case by eliminating two insert/extract while adding one narrower logic op.
https://bugs.llvm.org/show_bug.cgi?id=32790
Differential Revision: https://reviews.llvm.org/D33137
llvm-svn: 303997
Summary:
While this makes some case better and some case worse - so it's unclear if it is a worthy combine just by itself - this is a useful canonicalisation.
As per discussion in D32756 .
Reviewers: jyknight, nemanjai, mkuper, spatel, RKSimon, zvi, bkramer
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D32916
llvm-svn: 303441
Summary:
In SelectionDAG, when a store is immediately chained to another store
to the same address, elide the first store as it has no observable
effects. This is causes small improvements dealing with intrinsics
lowered to stores.
Test notes:
* Many testcases overwrite store addresses multiple times and needed
minor changes, mainly making stores volatile to prevent the
optimization from optimizing the test away.
* Many X86 test cases optimized out instructions associated with
associated with va_start.
* Note that test_splat in CodeGen/AArch64/misched-stp.ll no longer has
dependencies to check and can probably be removed and potentially
replaced with another test.
Reviewers: rnk, john.brawn
Subscribers: aemerson, rengolin, qcolombet, jyknight, nemanjai, nhaehnle, javed.absar, llvm-commits
Differential Revision: https://reviews.llvm.org/D33206
llvm-svn: 303198
Summary:
Eli pointed out that it's unsafe to combine the shifts to ISD::SHL etc.,
because those are not defined for b > sizeof(a) * 8, even after some of
the combiners run.
However, PPCISD::SHL defines that behavior (as the instructions themselves).
Move the combination to the backend.
The tests in shift_mask.ll still pass.
Reviewers: echristo, hfinkel, efriedma, iteratee
Subscribers: nemanjai, llvm-commits
Differential Revision: https://reviews.llvm.org/D33076
llvm-svn: 302937
This reverts r302712.
The change fails with ASAN enabled:
ERROR: AddressSanitizer: use-after-poison on address ... at ...
READ of size 2 at ... thread T0
#0 ... in llvm::SDNode::getNumValues() const <snip>/include/llvm/CodeGen/SelectionDAGNodes.h:855:42
#1 ... in llvm::SDNode::hasAnyUseOfValue(unsigned int) const <snip>/lib/CodeGen/SelectionDAG/SelectionDAG.cpp:7270:3
#2 ... in llvm::SDValue::use_empty() const <snip> include/llvm/CodeGen/SelectionDAGNodes.h:1042:17
#3 ... in (anonymous namespace)::DAGCombiner::MergeConsecutiveStores(llvm::StoreSDNode*) <snip>/lib/CodeGen/SelectionDAG/DAGCombiner.cpp:12944:7
Reviewers: niravd
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D33081
llvm-svn: 302746
Summary:
Allow consecutive stores whose values come from consecutive loads to
merged in the presense of other uses of the loads. Previously this was
disallowed as in general the merged load cannot be shared with the
other uses. Merging N stores into 1 may cause as many as N redundant
loads. However in the context of caching this should have neglible
affect on memory pressure and reduce instruction count making it
almost always a win.
Fixes PR32086.
Reviewers: spatel, jyknight, andreadb, hfinkel, efriedma
Reviewed By: efriedma
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D30471
llvm-svn: 302712
Before r247167, the pass manager builder controlled which AA
implementations were used, exporting them all in the AliasAnalysis
analysis group.
Now, AAResultsWrapperPass always uses BasicAA, but still uses other AA
implementations if made available in the pass pipeline.
But regardless, SDAGISel is required at O0, and really doesn't need to
be doing fancy optimizations based on useful AA results.
Don't require AA at CodeGenOpt::None, and only use it otherwise.
This does have a functional impact (and one testcase is pessimized
because we can't reuse a load). But I think that's desirable no matter
what.
Note that this alone doesn't result in less DT computations: TwoAddress
was previously able to reuse the DT we computed for SDAG. That will be
fixed separately.
Differential Revision: https://reviews.llvm.org/D32766
llvm-svn: 302611
Remove an extra canonicalization step if ISD::ABS is going to be used anyway.
Updated x86 abs combine to check that we are lowering from both canonicalizations.
llvm-svn: 302337
Summary: Do the transform when the carry isn't used. It's a pattern exposed when legalizing large integers.
Reviewers: jyknight, nemanjai, mkuper, spatel, RKSimon, zvi, bkramer
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D32755
llvm-svn: 302047
Summary:
This is the corresponding llvm change to D28037 to ensure no performance
regression.
Reviewers: bogner, kbarton, hfinkel, iteratee, echristo
Subscribers: nemanjai, llvm-commits
Differential Revision: https://reviews.llvm.org/D28329
llvm-svn: 301990
Summary: This is a common pattern that arise when legalizing large integers operations. Only do it when Y + 1 cannot overflow as this would change the carry behavior of uaddo .
Reviewers: jyknight, nemanjai, mkuper, spatel, RKSimon, zvi, bkramer
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D32687
llvm-svn: 301922
Summary: Common pattern when legalizing large integers operations. Similar to D32687, when the carry isn't used.
Reviewers: jyknight, nemanjai, mkuper, spatel, RKSimon, zvi, bkramer
Differential Revision: https://reviews.llvm.org/D32738
llvm-svn: 301919
The existing code only looks at half of the tree when matching bswap + rol patterns ending in an OR tree (as opposed to a cascade).
Patch originally introduced by Jim Lewis.
Submitted on the behalf of Dinar Temirbulatov.
Differential Revision: https://reviews.llvm.org/D32039
llvm-svn: 301907
We discussed shrinking/widening of selects in IR in D26556, and I'll try to get back to that
patch eventually. But I'm hoping that this transform is less iffy in the DAG where we can check
legality of the select that we want to produce.
A few things to note:
1. We can't wait until after legalization and do this generically because (at least in the x86
tests from PR14657), we'll have PACKSS and bitcasts in the pattern.
2. This might benefit more of the SSE codegen if we lifted the legal-or-custom requirement, but
that requires a closer look to make sure we don't end up worse.
3. There's a 'vblendv' opportunity that we're missing that results in andn/and/or in some cases.
That should be fixed next.
4. I'm assuming that AVX1 offers the worst of all worlds wrt uneven ISA support with multiple
legal vector sizes, but if there are other targets like that, we should add more tests.
5. There's a codegen miracle in the multi-BB tests from PR14657 (the gcc auto-vectorization tests):
despite IR that is terrible for the target, this patch allows us to generate the optimal loop
code because something post-ISEL is hoisting the splat extends above the vector loops.
Differential Revision: https://reviews.llvm.org/D32620
llvm-svn: 301781
Summary: As per discution on how to get better codegen an large int legalization, it became clear that using a glue for the carry was preventing several desirable optimizations. Passing the carry down as a value allow for more flexibility.
Reviewers: jyknight, nemanjai, mkuper, spatel, RKSimon, zvi, bkramer
Subscribers: igorb, llvm-commits
Differential Revision: https://reviews.llvm.org/D29872
llvm-svn: 301775
This patch replaces the separate APInts for KnownZero/KnownOne with a single KnownBits struct. This is similar to what was done to ValueTracking's version recently.
This is largely a mechanical transformation from KnownZero to Known.Zero.
Differential Revision: https://reviews.llvm.org/D32569
llvm-svn: 301620
This patch uses various APInt methods to reduce the number of temporary APInts. These were all found while working through converting SelectionDAG's computeKnownBits to also use the KnownBits struct recently added to the ValueTracking version.
llvm-svn: 301618
Besides better codegen, the motivation is to be able to canonicalize this pattern
in IR (currently we don't) knowing that the backend is prepared for that.
This may also allow removing code for special constant cases in
DAGCombiner::foldSelectOfConstants() that was added in D30180.
Differential Revision: https://reviews.llvm.org/D31944
llvm-svn: 301457
While we use BaseIndexOffset in FindBetterNeighborChains to
appropriately realize they're almost the same address and should be
improved concurrently we do not use it in isAlias using the non-index
understanding FindBaseOffset instead. Adding a BaseIndexOffset check
in isAlias like should allow indexed stores to be merged.
FindBaseOffset to be excised in subsequent patch.
Reviewers: jyknight, aditya_nandakumar, bogner
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D31987
llvm-svn: 301187
This reverts commit r301105, 4, 3 and 1, as a follow up of the previous
revert, which broke even more bots.
For reference:
Revert "[APInt] Use operator<<= where possible. NFC"
Revert "[APInt] Use operator<<= instead of shl where possible. NFC"
Revert "[APInt] Use ashInPlace where possible."
PR32754.
llvm-svn: 301111
getSignBit is a static function that creates an APInt with only the sign bit set. getSignMask seems like a better name to convey its functionality. In fact several places use it and then store in an APInt named SignMask.
Differential Revision: https://reviews.llvm.org/D32108
llvm-svn: 300856
I've changed one of the tests to not fold away, but we didn't and still don't do the transform
that the comment claims we do (and I don't know why we'd want to do that).
Follow-up to:
https://reviews.llvm.org/rL300725https://reviews.llvm.org/rL300763
llvm-svn: 300772
This allows forming more 'not' ops, so we get improvements for ISAs that have and-not.
Follow-up to:
https://reviews.llvm.org/rL300725
llvm-svn: 300763
The patch itself is simple: stop discriminating against vectors in visitAnd() and again in
SimplifyDemandedBits().
Some notes for reference:
1. We're not consistent about calls to SimplifyDemandedBits in the various visitXXX functions.
Sometimes, we check if the RHS is a constant first. Other times (like here), we just dive in.
2. I'd like to break the vector shackles in steps for the sake of risk minimization, but we could
make similar simultaneous changes in other places if we think that would be better.
3. I don't know what the intent of the changed tests in this patch was supposed to be, but since
they wiggled in a positive way, I'm just going with that. :)
4. In the rotate tests, note that we can see through non-splat constants. This is a result of D24253.
5. My motivation for being here now is to make D31944 look better, so this is step 1 of N towards
improving the vector codegen in that patch without writing any actual new code.
Differential Revision: https://reviews.llvm.org/D32230
llvm-svn: 300725
This patch uses lshrInPlace to replace code where the object that lshr is called on is being overwritten with the result.
This adds an lshrInPlace(const APInt &) version as well.
Differential Revision: https://reviews.llvm.org/D32155
llvm-svn: 300566
Remove non-consecutive stores from store merge candidate search as
they cannot be merged and will prevent us from finding subsequent
mergeable store cases.
Reviewers: jyknight, bogner, javed.absar, spatel
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D32086
llvm-svn: 300561
This is a follow-on to r299096 which added support for fmadd.
Subtract does not have the case where with two multiply operands we commute in
order to fuse with the multiply with the fewer uses.
llvm-svn: 299572
This is a generic combine enabled via target hook to reduce icmp logic as discussed in:
https://bugs.llvm.org/show_bug.cgi?id=32401
It's likely that other targets will want to enable this hook for scalar transforms,
and there are probably other patterns that can use bitwise logic to reduce comparisons.
Note that we are missing an IR canonicalization for these patterns, and we will probably
prefer the pair-of-compares form in IR (shorter, more likely to fold).
Differential Revision: https://reviews.llvm.org/D31483
llvm-svn: 299542
This reverts commit r299047 which is incorrect because the
simplification may result in incorrect propogation of undefs to users of
the folded shuffle.
Thanks to Andrea Di Biagio for pointing this out.
llvm-svn: 299368
This moves the isMask and isShiftedMask functions to be class methods. They now use the MathExtras.h function for single word size and leading/trailing zeros/ones or countPopulation for the multiword size. The previous implementation made multiple temorary memory allocations to do the bitwise arithmetic operations to match the MathExtras.h implementation.
Differential Revision: https://reviews.llvm.org/D31565
llvm-svn: 299362
The code already allowed vector types in via "isInteger" (which might want
a more specific name), so use splat-friendly constant predicates to match
those types.
llvm-svn: 299304
This can only happen when we have a mix of zero and undef elements and the two vectors have a different arrangement of zeros/undefs. The shuffle should eventually be constant folded to all zeros.
Fixes PR32484.
llvm-svn: 299291
(and (setlt X, 0), (setlt Y, 0)) --> (setlt (and X, Y), 0)
We have 7 similar folds, but this one got away. The fact that the
x86 test with a branch didn't change is probably a separate bug. We
may also be missing this and the related folds in instcombine.
llvm-svn: 299252
Now alternatively to the TargetOption.AllowFPOpFusion global flag, FMUL->FADD
can also use the per operation FMF to allow fusion.
The idea here is not to port everything to the new scheme (e.g. fused
multiply-and-sub will be ported later) but that this work all the way from
clang.
The transformation is conditionalized on *both* the FADD and the FMUL having
the FMF contract flag.
Differential Revision: https://reviews.llvm.org/D31169
llvm-svn: 299096
Deal with case that initial node is deleted during dag-combine leading
to an assertional failure in promoteIntShiftOp.
Fixes PR32420.
Reviewers: spatel, RKSimon
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D31403
llvm-svn: 298931
Reorder work in PromoteIntBinOp to prevent stale (deleted) nodes from
being used.
Fixes PR32340 and PR32345.
Reviewers: hfinkel, dbabokin
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D31148
llvm-svn: 298923
Summary:
This class is a list of AttributeSetNodes corresponding the function
prototype of a call or function declaration. This class used to be
called ParamAttrListPtr, then AttrListPtr, then AttributeSet. It is
typically accessed by parameter and return value index, so
"AttributeList" seems like a more intuitive name.
Rename AttributeSetImpl to AttributeListImpl to follow suit.
It's useful to rename this class so that we can rename AttributeSetNode
to AttributeSet later. AttributeSet is the set of attributes that apply
to a single function, argument, or return value.
Reviewers: sanjoy, javed.absar, chandlerc, pete
Reviewed By: pete
Subscribers: pete, jholewinski, arsenm, dschuff, mehdi_amini, jfb, nhaehnle, sbc100, void, llvm-commits
Differential Revision: https://reviews.llvm.org/D31102
llvm-svn: 298393
Don't scalarize VSELECT->SETCC when operands/results needs to be widened,
or when the type of the SETCC operands are different from those of the VSELECT.
(VSELECT SETCC) and (VSELECT (AND/OR/XOR (SETCC,SETCC))) are handled.
The previous splitting of VSELECT->SETCC in DAGCombiner::visitVSELECT() is
no longer needed and has been removed.
Updated tests:
test/CodeGen/ARM/vuzp.ll
test/CodeGen/NVPTX/f16x2-instructions.ll
test/CodeGen/X86/2011-10-19-widen_vselect.ll
test/CodeGen/X86/2011-10-21-widen-cmp.ll
test/CodeGen/X86/psubus.ll
test/CodeGen/X86/vselect-pcmp.ll
Review: Eli Friedman, Simon Pilgrim
https://reviews.llvm.org/D29489
llvm-svn: 297930
Reduced version of D26357 - based on the discussion on llvm-dev about canonicalization of UMIN/UMAX/SMIN/SMAX as well as ABS I've reduced that patch to just the ABS ISD node (with x86/sse support) to improve basic combines and lowering.
ARM/AArch64, Hexagon, PowerPC and NVPTX all have similar instructions allowing us to make this a generic opcode and move away from the hard coded tablegen patterns which makes it tricky to match more complex patterns.
At the moment this patch doesn't attempt legalization as we only create an ABS node if its legal/custom.
Differential Revision: https://reviews.llvm.org/D29639
llvm-svn: 297780
Recommiting with compiler time improvements
Recommitting after fixup of 32-bit aliasing sign offset bug in DAGCombiner.
* Simplify Consecutive Merge Store Candidate Search
Now that address aliasing is much less conservative, push through
simplified store merging search and chain alias analysis which only
checks for parallel stores through the chain subgraph. This is cleaner
as the separation of non-interfering loads/stores from the
store-merging logic.
When merging stores search up the chain through a single load, and
finds all possible stores by looking down from through a load and a
TokenFactor to all stores visited.
This improves the quality of the output SelectionDAG and the output
Codegen (save perhaps for some ARM cases where we correctly constructs
wider loads, but then promotes them to float operations which appear
but requires more expensive constant generation).
Some minor peephole optimizations to deal with improved SubDAG shapes (listed below)
Additional Minor Changes:
1. Finishes removing unused AliasLoad code
2. Unifies the chain aggregation in the merged stores across code
paths
3. Re-add the Store node to the worklist after calling
SimplifyDemandedBits.
4. Increase GatherAllAliasesMaxDepth from 6 to 18. That number is
arbitrary, but seems sufficient to not cause regressions in
tests.
5. Remove Chain dependencies of Memory operations on CopyfromReg
nodes as these are captured by data dependence
6. Forward loads-store values through tokenfactors containing
{CopyToReg,CopyFromReg} Values.
7. Peephole to convert buildvector of extract_vector_elt to
extract_subvector if possible (see
CodeGen/AArch64/store-merge.ll)
8. Store merging for the ARM target is restricted to 32-bit as
some in some contexts invalid 64-bit operations are being
generated. This can be removed once appropriate checks are
added.
This finishes the change Matt Arsenault started in r246307 and
jyknight's original patch.
Many tests required some changes as memory operations are now
reorderable, improving load-store forwarding. One test in
particular is worth noting:
CodeGen/PowerPC/ppc64-align-long-double.ll - Improved load-store
forwarding converts a load-store pair into a parallel store and
a memory-realized bitcast of the same value. However, because we
lose the sharing of the explicit and implicit store values we
must create another local store. A similar transformation
happens before SelectionDAG as well.
Reviewers: arsenm, hfinkel, tstellarAMD, jyknight, nhaehnle
llvm-svn: 297695
Summary: This essentially does the same transform as for ADC.
Reviewers: jyknight, nemanjai, mkuper, spatel, RKSimon, zvi, bkramer
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D30417
llvm-svn: 297416
Summary: This essentially does the same transform as for SUBC.
Reviewers: jyknight, nemanjai, mkuper, spatel, RKSimon, zvi, bkramer
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D30437
llvm-svn: 297404
As discussed in the review thread for rL297026, this is actually 2 changes that
would independently fix all of the test cases in the patch:
1. Return undef in FoldConstantArithmetic for div/rem by 0.
2. Move basic undef simplifications for div/rem (simplifyDivRem()) before
foldBinopIntoSelect() as a matter of efficiency.
I will handle the case of vectors with any zero element as a follow-up. That change
is the DAG sibling for D30665 + adding a check of vector elements to FoldConstantVectorArithmetic().
I'm deleting the test for PR30693 because it does not test for the actual bug any more
(dangers of using bugpoint).
Differential Revision:
https://reviews.llvm.org/D30741
llvm-svn: 297384
This helps in cases involving bitfields where an AND is exposed by
legalization.
Differential Revision: https://reviews.llvm.org/D30472
llvm-svn: 297249
This is known incomplete and not called in the right order relative to
other folds, but that's the current behavior. I'm just trying to clean
this up before making actual functional changes to make the patch smaller.
The logic here should mimic the IR equivalents that are in InstSimplify's
simplifyDivRem().
llvm-svn: 297086
Refactoring of duplicated code and more fixes to follow.
This is motivated by the post-commit comments for r296699:
http://lists.llvm.org/pipermail/llvm-commits/Week-of-Mon-20170306/435182.html
Ie, we can crash if we're missing obvious simplifications like this that
exist in the IR simplifier or if these occur later than expected.
The x86 change for non-splat division shows a potential opportunity to improve
vector codegen: we assumed that since only one lane had meaningful results, we
should do the math in scalar. But that means moving back and forth from vector
registers.
llvm-svn: 297026
select Cond, C +/- 1, C --> add(ext Cond), C -- with a target hook.
This is part of the ongoing process to obsolete D24480. The motivation is to
canonicalize to select IR in InstCombine whenever possible, so we need to have a way to
undo that easily in codegen.
PowerPC is an obvious winner for this kind of transform because it has fast and complete
bit-twiddling abilities but generally lousy conditional execution perf (although this might
have changed in recent implementations).
x86 also sees some wins, but the effect is limited because these transforms already mostly
exist in its target-specific combineSelectOfTwoConstants(). The fact that we see any x86
changes just shows that that code is a mess of special-case holes. We may be able to remove
some of that logic now.
My guess is that other targets will want to enable this hook for most cases. The likely
follow-ups would be to add value type and/or the constants themselves as parameters for the
hook. As the tests in select_const.ll show, we can transform any select-of-constants to
math/logic, but the general transform for any 2 constants needs one more instruction
(multiply or 'and').
ARM is one target that I think may not want this for most cases. I see infinite loops there
because it wants to use selects to enable conditionally executed instructions.
Differential Revision: https://reviews.llvm.org/D30537
llvm-svn: 296977
This patch causes compile times for some patterns to explode. I have
a (large, unreduced) test case that slows down by more than 20x and
several test cases slow down by 2x. I'm sending some of the test cases
directly to Nirav and following up with more details in the review log,
but this should unblock anyone else hitting this.
llvm-svn: 296862
Summary:
Currently, when 't1: i1 = setcc t2, t3, cc' followed by 't4: i1 = xor t1, Constant:i1<-1>' is folded into 't5: i1 = setcc t2, t3 !cc', SDLoc of newly created SDValue 't5' follows SDLoc of 't4', not 't1'. However, as the opcode of newly created SDValue is 'setcc', it make more sense to take DebugLoc from 't1' than 't4'. For the code below
```
extern int bar();
extern int baz();
int foo(int x, int y) {
if (x != y)
return bar();
else
return baz();
}
```
, following is the bitcode representation of 'foo' at the end of llvm-ir level optimization:
```
define i32 @foo(i32 %x, i32 %y) !dbg !4 {
entry:
tail call void @llvm.dbg.value(metadata i32 %x, i64 0, metadata !9, metadata !11), !dbg !12
tail call void @llvm.dbg.value(metadata i32 %y, i64 0, metadata !10, metadata !11), !dbg !13
%cmp = icmp ne i32 %x, %y, !dbg !14
br i1 %cmp, label %if.then, label %if.else, !dbg !16
if.then: ; preds = %entry
%call = tail call i32 (...) @bar() #3, !dbg !17
br label %return, !dbg !18
if.else: ; preds = %entry
%call1 = tail call i32 (...) @baz() #3, !dbg !19
br label %return, !dbg !20
return: ; preds = %if.else, %if.then
%retval.0 = phi i32 [ %call, %if.then ], [ %call1, %if.else ]
ret i32 %retval.0, !dbg !21
}
!14 = !DILocation(line: 5, column: 9, scope: !15)
!16 = !DILocation(line: 5, column: 7, scope: !4)
```
As you can see, in 'entry' block, 'icmp' instruction and 'br' instruction have different debug locations. However, with current implementation, there's no distinction between debug locations of these two when they are lowered to asm instructions. This is because 'icmp' and 'br' become 'setcc' 'xor' and 'brcond' in SelectionDAG, where SDLoc of 'setcc' follows the debug location of 'icmp' but SDLOC of 'xor' and 'brcond' follows the debug location of 'br' instruction, and SDLoc of 'xor' overwrites SDLoc of 'setcc' when they are folded. This patch addresses this issue.
Reviewers: atrick, bogner, andreadb, craig.topper, aprantl
Reviewed By: andreadb
Subscribers: jlebar, mkuper, jholewinski, andreadb, llvm-commits
Differential Revision: https://reviews.llvm.org/D29813
llvm-svn: 296825
This bug was introduced with:
https://reviews.llvm.org/rL296699
There may be a way to loosen the restriction, but for now just bail out
on any opaque constant.
The tests show that opacity is target-specific. This goes back to cost
calculations in ConstantHoisting based on TTI->getIntImmCost().
llvm-svn: 296768
This is part of the ongoing attempt to improve select codegen for all targets and select
canonicalization in IR (see D24480 for more background). The transform is a subset of what
is done in InstCombine's FoldOpIntoSelect().
I first noticed a regression in the x86 avx512-insert-extract.ll tests with a patch that
hopes to convert more selects to basic math ops. This appears to be a general missing DAG
transform though, so I added tests for all standard binops in rL296621
(PowerPC was chosen semi-randomly; it has scripted FileCheck support, but so do ARM and x86).
The poor output for "sel_constants_shl_constant" is tracked with:
https://bugs.llvm.org/show_bug.cgi?id=32105
Differential Revision: https://reviews.llvm.org/D30502
llvm-svn: 296699
Add check that deleted nodes do not get added to worklist. This can
occur when a node's operand is simplified to an existing node.
This fixes PR32108.
Reviewers: jyknight, hfinkel, chandlerc
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D30506
llvm-svn: 296668
Resubmit r295336 after the bug with non-zero offset patterns on BE targets is fixed (r296336).
Support {a|s}ext, {a|z|s}ext load nodes as a part of load combine patters.
Reviewed By: filcab
Differential Revision: https://reviews.llvm.org/D29591
llvm-svn: 296651
Recommiting after fixup of 32-bit aliasing sign offset bug in DAGCombiner.
* Simplify Consecutive Merge Store Candidate Search
Now that address aliasing is much less conservative, push through
simplified store merging search and chain alias analysis which only
checks for parallel stores through the chain subgraph. This is cleaner
as the separation of non-interfering loads/stores from the
store-merging logic.
When merging stores search up the chain through a single load, and
finds all possible stores by looking down from through a load and a
TokenFactor to all stores visited.
This improves the quality of the output SelectionDAG and the output
Codegen (save perhaps for some ARM cases where we correctly constructs
wider loads, but then promotes them to float operations which appear
but requires more expensive constant generation).
Some minor peephole optimizations to deal with improved SubDAG shapes (listed below)
Additional Minor Changes:
1. Finishes removing unused AliasLoad code
2. Unifies the chain aggregation in the merged stores across code
paths
3. Re-add the Store node to the worklist after calling
SimplifyDemandedBits.
4. Increase GatherAllAliasesMaxDepth from 6 to 18. That number is
arbitrary, but seems sufficient to not cause regressions in
tests.
5. Remove Chain dependencies of Memory operations on CopyfromReg
nodes as these are captured by data dependence
6. Forward loads-store values through tokenfactors containing
{CopyToReg,CopyFromReg} Values.
7. Peephole to convert buildvector of extract_vector_elt to
extract_subvector if possible (see
CodeGen/AArch64/store-merge.ll)
8. Store merging for the ARM target is restricted to 32-bit as
some in some contexts invalid 64-bit operations are being
generated. This can be removed once appropriate checks are
added.
This finishes the change Matt Arsenault started in r246307 and
jyknight's original patch.
Many tests required some changes as memory operations are now
reorderable, improving load-store forwarding. One test in
particular is worth noting:
CodeGen/PowerPC/ppc64-align-long-double.ll - Improved load-store
forwarding converts a load-store pair into a parallel store and
a memory-realized bitcast of the same value. However, because we
lose the sharing of the explicit and implicit store values we
must create another local store. A similar transformation
happens before SelectionDAG as well.
Reviewers: arsenm, hfinkel, tstellarAMD, jyknight, nhaehnle
llvm-svn: 296476
DAGCombiner already supports peeking thorough shuffles to improve vector element extraction, but legalization often leaves us in situations where we need to extract vector elements after shuffles have already been lowered.
This patch adds support for VECTOR_EXTRACT_ELEMENT/PEXTRW/PEXTRB instructions to attempt to handle target shuffles as well. I've covered some basic scenarios including handling shuffle mask scaling and the implicit zero-extension of PEXTRW/PEXTRB, there is more that could be done here (that I've mentioned in TODOs) but I haven't found many cases where its worth it.
Differential Revision: https://reviews.llvm.org/D30176
llvm-svn: 296381
Sanjay Patel