We're ANDing with 1 right after which will cause the SIGN_EXTEND to
be combined to ANY_EXTEND later. Might as well just start with an
ANY_EXTEND.
While there replace create the AND using the getZeroExtendInReg
helper to remove the need to explicitly create the VecOnes constant.
This code is replacing a shift with a new shift on an extended type.
If the shift amount type can't represent the maximum shift amount
for the new type, the amount needs to be extended to a type that
can.
Previously, the code just hardcoded a check for 256 bits which
seems to have been an assumption that the original shift amount
was MVT::i8. But that seems more catered to a specific target
like X86 that uses i8 as its legal shift amount type. Other
targets may use different types.
This commit changes the code to look at the real type of the shift
amount and makes sure it has enough bits for the Log2 of the
new type. There are similar checks to this in SelectionDAGBuilder
and LegalizeIntegerTypes.
Currently, DAG combiner uses (fmul (rsqrt x) x) to estimate square
root of x. However, this method would return NaN if x is +Inf, which
is incorrect.
Reviewed By: spatel
Differential Revision: https://reviews.llvm.org/D76853
Summary: These were templated due to SelectionDAG using int masks for shuffles and IR using unsigned masks for shuffles. But now that D72467 has landed we have an int mask version of IRBuilder::CreateShuffleVector. So just use int instead of a template
Reviewers: spatel, efriedma, RKSimon
Reviewed By: efriedma
Subscribers: hiraditya, llvm-commits
Differential Revision: https://reviews.llvm.org/D77183
Summary:
This is patch is part of a series to introduce an Alignment type.
See this thread for context: http://lists.llvm.org/pipermail/llvm-dev/2019-July/133851.html
See this patch for the introduction of the type: https://reviews.llvm.org/D64790
Reviewers: courbet
Subscribers: arsenm, dschuff, sdardis, nemanjai, jvesely, nhaehnle, sbc100, jgravelle-google, hiraditya, aheejin, kbarton, jrtc27, atanasyan, jfb, kerbowa, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D76925
Summary: This patch is the first effort to adding basic optimizations for FREEZE in SelDag.
Reviewers: spatel, lebedev.ri
Reviewed By: spatel
Subscribers: xbolva00, hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D76707
These transforms rely on a vector reduction flag on the SDNode
set by SelectionDAGBuilder. This flag exists because SelectionDAG
can't see across basic blocks so SelectionDAGBuilder is looking
across and saving the info. X86 is the only target that uses this
flag currently. By removing the X86 code we can remove the flag
and the SelectionDAGBuilder code.
This pass adds a dedicated IR pass for X86 that looks across the
blocks and transforms the IR into a form that the X86 SelectionDAG
can finish.
An advantage of this new approach is that we can enhance it to
shrink the phi nodes and final reduction tree based on the zeroes
that we need to concatenate to bring the partially reduced
reduction back up to the original width.
Differential Revision: https://reviews.llvm.org/D76649
We have some long-standing missing shuffle optimizations that could
use this transform via VectorCombine now:
https://bugs.llvm.org/show_bug.cgi?id=35454
(and we still don't get that case in the backend either)
This function is apparently templated because there's existing code
in IR that treats mask values as unsigned and backend code that
treats masks values as signed.
The mask values are not endian-dependent (as shown by the existing
bitcast transform from DAGCombiner).
Differential Revision: https://reviews.llvm.org/D76508
When decided whether to generate a post-inc load/store, look at the
other memory nodes that use the same base address and, if any proceed
the current node, then don't do the combine.
The change only seems to be affecting the Arm backend, which I was
surprised at, but it appears to fix a lot of our issues around MVE
masked load/stores having to store a temporary address after an early
post-increment on a shared base address.
Differential Revision: https://reviews.llvm.org/D75847
Extract the decision to combine into a post-inc address into a
couple of functions to make the logic more clear and re-usable.
Differential Revision: https://reviews.llvm.org/D76060
For folding pattern `x-(fma y,z,u*v) -> (fma -y,z,(fma -u,v,x))`, if
`yz` is 1, `uv` is -1 and `x` is -0, sign of result would be changed.
Differential Revision: https://reviews.llvm.org/D76419
Technically we can permit EXTLOAD of the LHS operand but only if all the extended bits are shifted out. Until we test coverage for that case, I'm just disabling this to fix PR45265.
Summary:
It can be the case that a vector type is legal but the corresponding
scalar type is not legal for an architecture (i8 vs. v16i8 on AArch64).
Check if the scalar type created when folding
truncate(build_vector(x,y)) -> build_vector(truncate(x),truncate(y))
is legal if we are running after the type legalizer.
This fixes https://github.com/android/ndk/issues/1207.
Reviewers: RKSimon, srhines
Subscribers: kristof.beyls, hiraditya, danielkiss, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D76312
Summary:
For some reason the order in which we call getNegatedExpression
for the involved operands, after a call to isCheaperToUseNegatedFPOps,
seem to matter. This patch includes a new test case in
test/CodeGen/X86/fdiv.ll that crashes if we reverse the order of
those calls. Before this patch that could happen depending on
which compiler that were used when buildind llvm. With my GCC
version (7.4.0) I got the crash, because it seems like it is
using a different order for the argument evaluation compared
to clang.
All other users of isCheaperToUseNegatedFPOps already used this
pattern with unfolded/ordered calls to getNegatedExpression, so
this patch is aligning visitFDIV with the other use cases.
This patch simply deals with the non-determinism for FDIV. While
the underlying problem with getNegatedExpression is discussed
further in D76439.
Reviewers: spatel, RKSimon
Reviewed By: spatel
Subscribers: hiraditya, mgrang, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D76319
If it is a*b-c*d, it could be also folded into fma(a, b, -c*d) or fma(-c, d, a*b).
This patch is trying to respect the uses of a*b and c*d to make the best choice.
Differential Revision: https://reviews.llvm.org/D75982
Under certain circumstances we'll end up in the position where the negated shift amount will get truncated to the type specified getScalarShiftAmountTy(), so we need to test for a truncated version of the shift amount as well.
This allows us to remove half of the remaining patterns tested for by X86ISelLowering's combineOrShiftToFunnelShift.
Followup to D75114, this patch reuses the existing MatchRotate ROTL/ROTR rotation pattern code to also recognize the more general FSHL/FSHR funnel shift patterns when we have variable shift amounts, matched with MatchFunnelPosNeg which acts in an (almost) equivalent manner to MatchRotatePosNeg.
This patch reuses the existing MatchRotate ROTL/ROTR rotation pattern code to also recognize the more general FSHL/FSHR funnel shift patterns when we have constant shift amounts.
Differential Revision: https://reviews.llvm.org/D75114
As noted on D75114, if both arguments of a funnel shift are consecutive loads we are missing the opportunity to combine them into a single load.
Differential Revision: https://reviews.llvm.org/D75624
As discussed in the commit thread for rGa253a2a and D73978, we can do more undef folding for FP ops.
The nnan and ninf fast-math-flags specify that if an operand is the disallowed value, the result is
poison, so we can produce an undef result.
But this doesn't work as expected (the undef operand cases remain) because of a Flags propagation
problem in SelectionDAGBuilder.
I've added DAGCombiner calls to enable these for the other cases because we've shown in other
patches that (because of the limited way that SDAG iterates), it is possible to miss simplifications
like this if they are done only at node creation time.
Several potential follow-ups to expand on this patch are possible.
Differential Revision: https://reviews.llvm.org/D75576
Summary:
Follow up from D75377. If the subvector is byte sized and the
index is aligned to the subvector size, we can shrink the load.
Reviewers: spatel, RKSimon
Reviewed By: RKSimon
Subscribers: dbabokin, hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D75434
The address calculation for the offset assumes that you can calculate the offset by multiplying the index by the store size of the element. But that only works if the element's store size is exactly its real size since we store vectors tightly packed in memory. There are improvements we could make to this like special casing extracting element 0. I think we could also handle cases where the extracted VT is byte sized and the index is aligned with the extract element count.
Differential Revision: https://reviews.llvm.org/D75377
Select_cc isn't used by all targets. X86 doesn't have optimizations
for it.
Since we already know the input to the sint_to_fp/uint_to_fp is
a setcc we can just emit a plain select using that setcc as the
condition. Other DAG combines can turn that into a select_cc on
targets that support it.
Differential Revision: https://reviews.llvm.org/D75415
We get the simple cases of this via demanded elements and other folds,
but that doesn't work if the values have >1 use, so add a dedicated
match for the pattern.
We already have this transform in IR, but it doesn't help the
motivating x86 tests (based on PR42024) because the shuffles don't
exist until after legalization and other combines have happened.
The AArch64 test shows a minimal IR example of the problem.
Differential Revision: https://reviews.llvm.org/D75348
The alias analysis in DAG Combine looks at the BaseAlign, the Offset and
the Size of two accesses, and determines if they are known to access
different parts of memory by the fact that they are different offsets
from inside that "alignment window". It does not seem to account for
accesses that are not a multiple of the size, and may overflow from one
alignment window into another.
For example in the test case we have a 19byte memset that is splits into
a 16 byte neon store and an unaligned 4 byte store with a 15 byte
offset. This 15byte offset (with a base align of 8) wraps around to the
next alignment windows. When compared to an access that is a 16byte
offset (of the same 4byte size and 8byte basealign), the two accesses
are said not to alias.
I've fixed this here by just ensuring that the offsets are a multiple of
the size, ensuring that they don't overlap by wrapping. Fixes PR45035,
which was exposed by the UseAA changes in the arm backend.
Differential Revision: https://reviews.llvm.org/D75238
This may inhibit vector narrowing in general, but there's
already an inconsistency in the way that we deal with this
pattern as shown by the test diff.
We may want to add a dedicated function for narrowing fneg.
It's often folded into some other op, so moving it away from
other math ops may cause regressions that we would not see
for normal binops.
See D73978 for more details.
Use the SelectionDAG::getValidShiftAmountConstant helper to get const/constsplat shift amounts, which allows us to drop the out of range shift amount early-out.
First step towards better non-uniform shift amount support in SimplifyDemandedBits.
Similar to what we already do with SimplifyDemandedVectorElts, call SimplifyDemandedBits across all the extracted elements of the source vector, treating it as single use.
There's a minor regression in store-weird-sizes.ll which will be addressed in an upcoming SimplifyDemandedBits patch.
Summary:
This patch implements the part of the calling convention
where SVE Vectors are passed by reference. This means the
caller must allocate stack space for these objects and
pass the address to the callee.
Reviewers: efriedma, rovka, cameron.mcinally, c-rhodes, rengolin
Reviewed By: efriedma
Subscribers: tschuett, kristof.beyls, hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D71216
This adds another pattern to the combiner for a case that we were not handling
to generate the REV16 instruction for ARM/Thumb2 and a bswap+ror on X86.
Differential Revision: https://reviews.llvm.org/D74032
The isNegatibleForFree/getNegatedExpression methods currently rely on a raw char value to indicate whether a negation is beneficial or not.
This patch replaces the char return value with an NegatibleCost enum to more clearly demonstrate what is implied.
It also renames isNegatibleForFree to getNegatibleCost to more accurately reflect whats going on.
Differential Revision: https://reviews.llvm.org/D74221
Add a simplification to fuse a manual vector extract with shifts and
truncate into a bitcast.
Unpacking and packing values into vectors is only optimized with
extractelement instructions, not when manually unpacked using shifts
and truncates.
This patch simplifies shifts and truncates into a bitcast if possible.
Simplify (build_vec (trunc $1)
(trunc (srl $1 width))
(trunc (srl $1 (2 * width))) ...)
to (bitcast $1)
Differential Revision: https://reviews.llvm.org/D73892
AMDGPU and x86 at least both have separate controls for whether
denormal results are flushed on output, and for whether denormals are
implicitly treated as 0 as an input. The current DAGCombiner use only
really cares about the input treatment of denormals.
Updated FoldConstantArithmetic method signature to match that of
FoldConstantVectorArithmetic in preparation for merging the two
functions together
https://bugs.llvm.org/show_bug.cgi?id=36544
This is the first step in combining the various
FoldConstantVectorArithmetic and FoldConstantVectorArithmetic
functions into one FoldConstantArithmetic function.
Differential Revision: https://reviews.llvm.org/D72870
Unlike the existing code that I modified here, I only handle the
case where the strict_fsetcc has a single use. Not sure exactly
how to handle multiples uses.
Testing this on X86 is hard because we already have a other
combines that get rid of lowered version of the integer setcc that
this xor will eventually become. So this combine really just
saves a bunch of extra nodes being created. Not sure about other
targets.
Differential Revision: https://reviews.llvm.org/D71816
This patch also fixes up a number of cases in DAGCombine and
SelectionDAGBuilder where the size of a scalable vector is used in a
fixed-width context (thus triggering an assertion failure).
Reviewers: efriedma, c-rhodes, rovka, cameron.mcinally
Reviewed By: efriedma
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D71215
This was unconditionally folding this to the source operand, even if the access was out of bounds. Use undef instead of the extract is not the first element.
This helps with some cases where 3-vectors are legalized and avoids processing the 4th component.
Original Patch by: arsenm (Matt Arsenault)
Differential Revision: https://reviews.llvm.org/D51589
If we are extracting a chunk of a vector that's a fraction of an
operand of the concatenated vector operand, we can extract directly
from one of those original operands.
This is another suggestion from PR42024:
https://bugs.llvm.org/show_bug.cgi?id=42024#c2
But I'm not sure yet if it will make any difference on those patterns.
It seems to help a few existing AVX512 tests though.
Differential Revision: https://reviews.llvm.org/D72361
This is a positive combination as long as the NEG is NOT free,
as we are reducing the number of NEG from two to one.
Differential Revision: https://reviews.llvm.org/D72312
This is possibly a small part towards solving PR42024:
https://bugs.llvm.org/show_bug.cgi?id=42024
The vectorizer is creating shuffles of concat like this:
%63 = shufflevector <4 x i64> %x, <4 x i64> undef, <8 x i32> <i32 0, i32 1, i32 2, i32 3, i32 0, i32 1, i32 2, i32 3>
%64 = shufflevector <8 x i64> %63, <8 x i64> undef, <8 x i32> <i32 0, i32 4, i32 1, i32 5, i32 2, i32 6, i32 3, i32 7>
That might be fixable in the vectorizers, but we're not allowed to fold that into a single shuffle in instcombine,
so we should have a backend backstop to convert that into the likely simpler form:
%64 = shufflevector <4 x i64> %x, <4 x i64> undef, <8 x i32> <i32 0, i32 0, i32 1, i32 1, i32 2, i32 2, i32 3, i32 3>
Differential Revision: https://reviews.llvm.org/D72300
This is the DAG node for SIGN_EXTEND_INREG :
t21: v4i32 = sign_extend_inreg t18, ValueType:ch:v4i16
It has two operands. The first one is the value it want to extend, and the second
one is the type to specify how to extend the value. For this example, it means
that, it is signed extend the t18(v4i32) from v4i16 to v4i32. That is
the semantics of c code:
vector int foo(vector int m) {
return m << 16 >> 16;
}
And it could be any vector type that hardware support the operation, though
the type 'v4i16' is NOT legal for the target. When we are trying to combine
the srl + sra, what we did now is calling the TLI.isOperationLegal(), which
will also check the legality of the type. That doesn't make sense.
Differential Revision: https://reviews.llvm.org/D70230
The fold 'A - (A & (B - 1))' -> 'A & (0 - B)'
added in 8dab0a4a7d
is too specific. It should/can just be 'A - (A & B)' -> 'A & (~B)'
Even if we don't manage to fold `~` into B,
we have likely formed `ANDN` node.
Also, this way there's less similar-but-duplicate folds.
Name: X - (X & Y) -> X & (~Y)
%o = and i32 %X, %Y
%r = sub i32 %X, %o
=>
%n = xor i32 %Y, -1
%r = and i32 %X, %n
https://rise4fun.com/Alive/kOUl
See
https://bugs.llvm.org/show_bug.cgi?id=44448https://reviews.llvm.org/D71499
The fold 'A - (A & (B - 1))' -> 'A & (0 - B)'
added in 8dab0a4a7d
is too specific. It should just be 'A - (A & B)' -> 'A & (~B)',
but we currently fail to sink that '~' into `(B - 1)`.
Name: ~(X - 1) -> (0 - X)
%o = add i32 %X, -1
%r = xor i32 %o, -1
=>
%r = sub i32 0, %X
https://rise4fun.com/Alive/rjU
While we do manage to fold integer-typed IR in middle-end,
we can't do that for the main motivational case of pointers.
There is @llvm.ptrmask() intrinsic which may or may not be helpful,
but i'm not sure it is fully considered canonical yet,
not everything is fully aware of it likely.
Name: PR44448 ptr - (ptr & C) -> ptr & (~C)
%bias = and i32 %ptr, C
%r = sub i32 %ptr, %bias
=>
%r = and i32 %ptr, ~C
See
https://bugs.llvm.org/show_bug.cgi?id=44448https://reviews.llvm.org/D71499
While we do manage to fold integer-typed IR in middle-end,
we can't do that for the main motivational case of pointers.
There is @llvm.ptrmask() intrinsic which may or may not be helpful,
but i'm not sure it is fully considered canonical yet,
not everything is fully aware of it likely.
https://rise4fun.com/Alive/ZVdp
Name: ptr - (ptr & (alignment-1)) -> ptr & (0 - alignment)
%mask = add i64 %alignment, -1
%bias = and i64 %ptr, %mask
%r = sub i64 %ptr, %bias
=>
%highbitmask = sub i64 0, %alignment
%r = and i64 %ptr, %highbitmask
See
https://bugs.llvm.org/show_bug.cgi?id=44448https://reviews.llvm.org/D71499
This was increasing the number of instructions when fsub was legalized
on AMDGPU with no signed zeros enabled. This fold should be guarded by
hasOneUse, and I don't think getNode should be doing that. The same
fold is already done as a regular combine through isNegatibleForFree.
This does require duplicating, even though isNegatibleForFree does
this combine already (and properly checks hasOneUse) to avoid one PPC
regression. In the regression, the outer fneg has nsz but the fsub
operand does not. isNegatibleForFree only sees the operand, and
doesn't see it's used from a nsz context. A nsz parameter needs to be
added and threaded through isNegatibleForFree to avoid this.
This moves the X86 specific transform from rL364407
into DAGCombiner to generically handle 'little to big' cases
(for example: extract_subvector(v2i64 bitcast(v16i8))). This
allows us to remove both the x86 implementation and the aarch64
bitcast(extract_subvector(bitcast())) combine.
Earlier patches that dealt with regressions initially exposed
by this patch:
rG5e5e99c041e4
rG0b38af89e2c0
Patch by: @RKSimon (Simon Pilgrim)
Differential Revision: https://reviews.llvm.org/D63815
Summary:
Without this check unnecessary FMA instructions are generated when the FSUB terms are reused.
This also has the side-effect that the same value is computed to different levels of precision, which can create undesirable effects if the results are used together in subsequent computation.
Reviewers: arsenm, nhaehnle, foad, tpr, dstuttard, spatel
Reviewed By: arsenm
Subscribers: jvesely, wdng, hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D71656
Summary:
Right now, DAGCombiner process the nodes in an iplementation defined order. This tends to be fragile as optimisation may or may not kick in depending on the traversal order.
This is part of a larger effort to get the DAGCombiner to process its node in topological order.
Reviewers: craig.topper, efriedma, RKSimon, lebedev.ri
Subscribers: hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D70921
Summary:
To find potential opportunities to use getMemBasePlusOffset() I looked at
all ISD::ADD uses found with the regex getNode\(ISD::ADD,.+,.+Ptr
in lib/CodeGen/SelectionDAG. If this patch is accepted I will convert
the files in the individual backends too.
The motivation for this change is our out-of-tree CHERI backend
(https://github.com/CTSRD-CHERI/llvm-project). We use a separate register
type to store pointers (128-bit capabilities, which are effectively
unforgeable and monotonic fat pointers). These capabilities permit a
reduced set of operations and therefore use a separate ValueType (iFATPTR).
to represent pointers implemented as capabilities.
Therefore, we need to avoid using ISD::ADD for our patterns that operate
on pointers and need to use a function that chooses ISD::ADD or a new
ISD::PTRADD opcode depending on the value type.
We originally added a new DAG.getPointerAdd() function, but after this
patch series we can modify the implementation of getMemBasePlusOffset()
instead. Avoiding direct uses of ISD::ADD for pointer types will
significantly reduce the amount of assertion/instruction selection
failures for us in future upstream merges.
Reviewers: spatel
Reviewed By: spatel
Subscribers: merge_guards_bot, hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D71207
The initial attempt (rG89633320) botched the logic by reversing
the source/dest types. Added x86 tests for additional coverage.
The vector tests show a potential improvement (fold vector load
instead of broadcasting), but that's a known/existing problem.
This fold is done in IR by instcombine, and we have a special
form of it already here in DAGCombiner, but we want the more
general transform too:
https://rise4fun.com/Alive/3jZm
Name: general
Pre: (C1 + zext(C2) < 64)
%s = lshr i64 %x, C1
%t = trunc i64 %s to i16
%r = lshr i16 %t, C2
=>
%s2 = lshr i64 %x, C1 + zext(C2)
%a = and i64 %s2, zext((1 << (16 - C2)) - 1)
%r = trunc %a to i16
Name: special
Pre: C1 == 48
%s = lshr i64 %x, C1
%t = trunc i64 %s to i16
%r = lshr i16 %t, C2
=>
%s2 = lshr i64 %x, C1 + zext(C2)
%r = trunc %s2 to i16
...because D58017 exposes a regression without this fold.
Summary:
The use of a boolean isInteger flag (generally initialized using
VT.isInteger()) caused errors in our out-of-tree CHERI backend
(https://github.com/CTSRD-CHERI/llvm-project).
In our backend, pointers use a separate ValueType (iFATPTR) and therefore
.isInteger() returns false. This meant that getSetCCInverse() was using the
floating-point variant and generated incorrect code for us:
`(void *)0x12033091e < (void *)0xffffffffffffffff` would return false.
Committing this change will significantly reduce our merge conflicts
for each upstream merge.
Reviewers: spatel, bogner
Reviewed By: bogner
Subscribers: wuzish, arsenm, sdardis, nemanjai, jvesely, nhaehnle, hiraditya, kbarton, jrtc27, atanasyan, jsji, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D70917
This fold is done in IR by instcombine, and we have a special
form of it already here in DAGCombiner, but we want the more
general transform too:
https://rise4fun.com/Alive/3jZm
Name: general
Pre: (C1 + zext(C2) < 64)
%s = lshr i64 %x, C1
%t = trunc i64 %s to i16
%r = lshr i16 %t, C2
=>
%s2 = lshr i64 %x, C1 + zext(C2)
%a = and i64 %s2, zext((1 << (16 - C2)) - 1)
%r = trunc %a to i16
Name: special
Pre: C1 == 48
%s = lshr i64 %x, C1
%t = trunc i64 %s to i16
%r = lshr i16 %t, C2
=>
%s2 = lshr i64 %x, C1 + zext(C2)
%r = trunc %s2 to i16
...because D58017 exposes a regression without this fold.
This is not quite NFC because I changed the SDLoc to use the more
standard 'N' (the starting node for the fold).
This transform is a special-case of a more general fold that we
do in IR, but it seems like the general fold is needed here too
to avoid a potential regression seen in D58017.
https://rise4fun.com/Alive/3jZm
Summary: This combine showed up as needed when exploring the regression when processing the DAG in topological order.
Reviewers: craig.topper, efriedma, RKSimon, lebedev.ri
Subscribers: llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D68195
MVE has a basic symmetry between it's normal loads/store operations and
the masked variants. This means that masked loads and stores can use
pre-inc and post-inc addressing modes, just like the standard loads and
stores already do.
To enable that, this patch adds all the relevant infrastructure for
treating masked loads/stores addressing modes in the same way as normal
loads/stores.
This involves:
- Adding an AddressingMode to MaskedLoadStoreSDNode, along with an extra
Offset operand that is added after the PtrBase.
- Extending the IndexedModeActions from 8bits to 16bits to store the
legality of masked operations as well as normal ones. This array is
fairly small, so doubling the size still won't make it very large.
Offset masked loads can then be controlled with
setIndexedMaskedLoadAction, similar to standard loads.
- The same methods that combine to indexed loads, such as
CombineToPostIndexedLoadStore, are adjusted to handle masked loads in
the same way.
- The ARM backend is then adjusted to make use of these indexed masked
loads/stores.
- The X86 backend is adjusted to hopefully be no functional changes.
Differential Revision: https://reviews.llvm.org/D70176
We already have this simplification at node-creation-time, but
the test from:
https://bugs.llvm.org/show_bug.cgi?id=44139
...shows that we can combine our way to an assert/crash too.
Summary:
Convert (uaddo (uaddo x, y), carryIn) into addcarry x, y, carryIn if-and-only-if the carry flags of the first two uaddo are merged via OR or XOR.
Work remaining: match ADD, etc.
Reviewers: craig.topper, RKSimon, spatel, niravd, jonpa, uweigand, deadalnix, nikic, lebedev.ri, dmgreen, chfast
Reviewed By: lebedev.ri
Subscribers: chfast, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D70079
Cleanup handling of the denormal-fp-math attribute. Consolidate places
checking the allowed names in one place.
This is in preparation for introducing FP type specific variants of
the denormal-fp-mode attribute. AMDGPU will switch to using this in
place of the current hacky use of subtarget features for the denormal
mode.
Introduce a new header for dealing with FP modes. The constrained
intrinsic classes define related enums that should also be moved into
this header for uses in other contexts.
The verifier could use a check to make sure the denorm-fp-mode
attribute is sane, but there currently isn't one.
Currently, DAGCombiner incorrectly asssumes non-IEEE behavior by
default in the one current user. Clang must be taught to start
emitting this attribute by default to avoid regressions when this is
switched to assume ieee behavior if the attribute isn't present.
AMDGPU needs to know the FP mode for the function to answer this
correctly when this is removed from the subtarget.
AArch64 had to make this more complicated by using this from an IR
hook, so add an IR typed overload.
* Implements scalable size queries for MVTs, split out from D53137.
* Contains a fix for FindMemType to avoid using scalable vector type
to contain non-scalable types.
* Explicit casts for several places where implicit integer sign
changes or promotion from 32 to 64 bits caused problems.
* CodeGenDAGPatterns will treat scalable and non-scalable vector types
as different.
Reviewers: greened, cameron.mcinally, sdesmalen, rovka
Reviewed By: rovka
Differential Revision: https://reviews.llvm.org/D66871
Summary:
Replaces
```
unsigned getShiftAmountThreshold(EVT VT)
```
by
```
bool shouldAvoidTransformToShift(EVT VT, unsigned amount)
```
thus giving more flexibility for targets to decide whether particular shift amounts must be considered expensive or not.
Updates the MSP430 target with a custom implementation.
This continues D69116, D69120, D69326 and updates them, so all of them must be committed before this.
Existing tests apply, a few more have been added.
Reviewers: asl, spatel
Reviewed By: spatel
Subscribers: hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D70042
This is a partial fix for the issues described in commit message of 027aa27 (the revert of G24609). Unfortunately, I can't provide test coverage for it on it's own as the only (known) wrong example is still wrong, but due to a separate issue.
These fixes are cases where when performing unrelated DAG combines, we were dropping the atomicity flags entirely.
Summary:
Functions replaceStoreOfFPConstant() and OptimizeFloatStore() both
replace store of float by a store of an integer unconditionally. However
this generates wrong code when the store that is replaced is an indexed
or truncating store. This commit solves this issue by adding an early
return in these functions when the store being considered is not a
normal store.
Bug was only observed on out of tree targets, hence the lack of testcase
in this commit.
Reviewers: efriedma
Subscribers: hiraditya, arphaman, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D68420
Continuation of:
D69116
Contributes to a fix for PR43559:
https://bugs.llvm.org/show_bug.cgi?id=43559
See also D69099 and D69116
Use the TLI hook in DAGCombine.cpp to guard against creating
shift nodes that are not optimal for a target.
Patch by: @joanlluch (Joan LLuch)
Differential Revision: https://reviews.llvm.org/D69120
For AMDGPU this depends on whether denormals are enabled in the
default FP mode for the function. Currently this is treated as a
subtarget feature, so FMAD is selectively legal based on that. I want
to move this out of the subtarget features so this can be controlled
with a denormal mode attribute. Additionally, this will allow folding
based on a future ftz fast math flag.
This enhances D69127 (rGe6c145e0548e3b3de6eab27e44e1504387cf6b53)
to handle the looser "any_extend" cast in addition to zext.
This is a prerequisite step for canonicalizing in the other direction
(narrow the popcount) in IR - PR43688:
https://bugs.llvm.org/show_bug.cgi?id=43688
Similar to:
rG4c47617627fb
This makes the DAG behavior consistent with IR's insertelement.
https://bugs.llvm.org/show_bug.cgi?id=42689
I've tried to maintain test intent for AArch64 and WebAssembly
by replacing undef index operands with something else.
zext (ctpop X) --> ctpop (zext X)
This is a prerequisite step for canonicalizing in the other direction (narrow the popcount) in IR - PR43688:
https://bugs.llvm.org/show_bug.cgi?id=43688
I'm not sure if any other targets are affected, but I found a missing fold for PPC, so added tests based on that.
The reason we widen all the way to 64-bit in these tests is because the initial DAG looks something like this:
t5: i8 = ctpop t4
t6: i32 = zero_extend t5 <-- created based on IR, but unused node?
t7: i64 = zero_extend t5
Differential Revision: https://reviews.llvm.org/D69127
Adds a new ISD node to replicate a scalar value across all elements of
a vector. This is needed for scalable vectors, since BUILD_VECTOR cannot
be used.
Fixes up default type legalization for scalable vectors after the
new MVT type ranges were introduced.
At present I only use this node for scalable vectors. A DAGCombine has
been added to transform a BUILD_VECTOR into a SPLAT_VECTOR if all
elements are the same, but only if the default operation action of
Expand has been overridden by the target.
I've only added result promotion legalization for scalable vector
i8/i16/i32/i64 types in AArch64 for now.
Reviewers: t.p.northover, javed.absar, greened, cameron.mcinally, jmolloy
Reviewed By: jmolloy
Differential Revision: https://reviews.llvm.org/D47775
llvm-svn: 375222
Add generic DAG combine for extending masked loads.
Allow us to generate sext/zext masked loads which can access v4i8,
v8i8 and v4i16 memory to produce v4i32, v8i16 and v4i32 respectively.
Differential Revision: https://reviews.llvm.org/D68337
llvm-svn: 375085
Examples:
i32 X > -1 ? C1 : -1 --> (X >>s 31) | C1
i8 X < 0 ? C1 : 0 --> (X >>s 7) & C1
This is a small generalization of a fold requested in PR43650:
https://bugs.llvm.org/show_bug.cgi?id=43650
The sign-bit of the condition operand can be used as a mask for the true operand:
https://rise4fun.com/Alive/paT
Note that we already handle some of the patterns (isNegative + scalar) because
there's an over-specialized, yet over-reaching fold for that in foldSelectCCToShiftAnd().
It doesn't use any TLI hooks, so I can't easily rip out that code even though we're
duplicating part of it here. This fold is guarded by TLI.convertSelectOfConstantsToMath(),
so it should not cause problems for targets that prefer select over shift.
Also worth noting: I thought we could generalize this further to include the case where
the true operand of the select is not constant, but Alive says that may allow poison to
pass through where it does not in the original select form of the code.
Differential Revision: https://reviews.llvm.org/D68949
llvm-svn: 374902
The diffs suggest that we are missing some more basic
analysis/transforms, but this keeps the vector path in
sync with the scalar (rL374397). This is again a
preliminary step for introducing the reverse transform
in IR as proposed in D63382.
llvm-svn: 374555
This reverses the scalar canonicalization proposed in D63382.
Pre: isPowerOf2(C1)
%r = select i1 %cond, i32 C1, i32 0
=>
%z = zext i1 %cond to i32
%r = shl i32 %z, log2(C1)
https://rise4fun.com/Alive/Z50
x86 already tries to fold this pattern, but it isn't done
uniformly, so we still see a diff. AArch64 probably should
enable the TLI hook to benefit too, but that's a follow-on.
llvm-svn: 374397
Summary: It ensures that the bswap is generated even when a part of the subtree already matches a bswap transform.
Reviewers: craig.topper, efriedma, RKSimon, lebedev.ri
Subscribers: llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D68250
llvm-svn: 374340
As background, starting in D66309, I'm working on support unordered atomics analogous to volatile flags on normal LoadSDNode/StoreSDNodes for X86.
As part of that, I spent some time going through usages of LoadSDNode and StoreSDNode looking for cases where we might have missed a volatility check or need an atomic check. I couldn't find any cases that clearly miscompile - i.e. no test cases - but a couple of pieces in code loop suspicious though I can't figure out how to exercise them.
This patch adds defensive checks and asserts in the places my manual audit found. If anyone has any ideas on how to either a) disprove any of the checks, or b) hit the bug they might be fixing, I welcome suggestions.
Differential Revision: https://reviews.llvm.org/D68419
llvm-svn: 374261
If a fp scalar is loaded and then used as both a scalar and a vector broadcast, perform the load as a broadcast and then extract the scalar for 'free' from the 0th element.
This involved switching the order of the X86ISD::BROADCAST combines so we only convert to X86ISD::BROADCAST_LOAD once all other canonicalizations have been attempted.
Adds a DAGCombinerInfo::recursivelyDeleteUnusedNodes wrapper.
Fixes PR43217
Differential Revision: https://reviews.llvm.org/D68544
llvm-svn: 373871
Summary: It ensures that the bswap is generated even when a part of the subtree already matches a bswap transform.
Reviewers: craig.topper, efriedma, RKSimon, lebedev.ri
Subscribers: llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D68250
llvm-svn: 373850
As discussed on llvm-dev and:
https://bugs.llvm.org/show_bug.cgi?id=43542
...we have transforms that assume shift operations are legal and transforms to
use them are profitable, but that may not hold for simple targets.
In this case, the MSP430 target custom lowers shifts by repeating (many)
simpler/fixed ops. That can be avoided by keeping this code as setcc/select.
Differential Revision: https://reviews.llvm.org/D68397
llvm-svn: 373666
This patch converts the DAGCombine isNegatibleForFree/GetNegatedExpression into overridable TLI hooks.
The intention is to let us extend existing FNEG combines to work more generally with negatible float ops, allowing it work with target specific combines and opcodes (e.g. X86's FMA variants).
Unlike the SimplifyDemandedBits, we can't just handle target nodes through a Target callback, we need to do this as an override to allow targets to handle generic opcodes as well. This does mean that the target implementations has to duplicate some checks (recursion depth etc.).
Partial reversion of rL372756 - I've identified the infinite loop issue inside the X86 override but haven't fixed it yet so I've only (re)committed the common TargetLowering refactoring part of the patch.
Differential Revision: https://reviews.llvm.org/D67557
llvm-svn: 373343
Rename old function to explicitly show that it cares only about alignment.
The new allowsMemoryAccess call the function related to alignment by default
and can be overridden by target to inform whether the memory access is legal or
not.
Differential Revision: https://reviews.llvm.org/D67121
llvm-svn: 372935
We might be able to do better on the example in the test,
but in general, we should not scalarize a splatted vector
binop if there are other uses of the binop. Otherwise, we
can end up with code as we had - a scalar op that is
redundant with a vector op.
llvm-svn: 372886
This patch converts the DAGCombine isNegatibleForFree/GetNegatedExpression into overridable TLI hooks and includes a demonstration X86 implementation.
The intention is to let us extend existing FNEG combines to work more generally with negatible float ops, allowing it work with target specific combines and opcodes (e.g. X86's FMA variants).
Unlike the SimplifyDemandedBits, we can't just handle target nodes through a Target callback, we need to do this as an override to allow targets to handle generic opcodes as well. This does mean that the target implementations has to duplicate some checks (recursion depth etc.).
I've only begun to replace X86's FNEG handling here, handling FMADDSUB/FMSUBADD negation and some low impact codegen changes (some FMA negatation propagation). We can build on this in future patches.
Differential Revision: https://reviews.llvm.org/D67557
llvm-svn: 372333
As commented on D67557 we have a lot of uses of depth checks all using magic numbers.
This patch adds the SelectionDAG::MaxRecursionDepth constant and moves over some general cases to use this explicitly.
Differential Revision: https://reviews.llvm.org/D67711
llvm-svn: 372315
Summary:
`DAGCombiner::visitADDLikeCommutative()` already has a sibling fold:
`(add X, Carry) -> (addcarry X, 0, Carry)`
This fold, as suggested by @efriedma, helps recover from //some//
of the regressions of D62266
Reviewers: efriedma, deadalnix
Subscribers: javed.absar, kristof.beyls, llvm-commits, efriedma
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D62392
llvm-svn: 372259
This is the first sweep of generic code to add isAtomic bailouts where appropriate. The intention here is to have the switch from AtomicSDNode to LoadSDNode/StoreSDNode be close to NFC; that is, I'm not looking to allow additional optimizations at this time. That will come later. See D66309 for context.
Differential Revision: https://reviews.llvm.org/D66318
llvm-svn: 371786
The X86 decision assumes the compare will produce a result in an XMM
register, but that can't happen for an fp128 compare since those
go to a libcall the returns an i32. Pass the VT so X86 can check
the type.
llvm-svn: 371775
Current implementation of estimating divisions loses precision since it
estimates reciprocal first and does multiplication. This patch is to re-order
arithmetic operations in the last iteration in DAGCombiner to improve the
accuracy.
Reviewed By: Sanjay Patel, Jinsong Ji
Differential Revision: https://reviews.llvm.org/D66050
llvm-svn: 371713
Summary:
Add an intrinsic that takes 2 unsigned integers with
the scale of them provided as the third argument and
performs fixed point multiplication on them. The
result is saturated and clamped between the largest and
smallest representable values of the first 2 operands.
This is a part of implementing fixed point arithmetic
in clang where some of the more complex operations
will be implemented as intrinsics.
Patch by: leonardchan, bjope
Reviewers: RKSimon, craig.topper, bevinh, leonardchan, lebedev.ri, spatel
Reviewed By: leonardchan
Subscribers: ychen, wuzish, nemanjai, MaskRay, jsji, jdoerfert, Ka-Ka, hiraditya, rjmccall, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D57836
llvm-svn: 371308
The motivating bugs are:
https://bugs.llvm.org/show_bug.cgi?id=41340https://bugs.llvm.org/show_bug.cgi?id=42697
As discussed there, we could view this as a failure of IR canonicalization,
but then we would need to implement a backend fixup with target overrides
to get this right in all cases. Instead, we can just view this as a codegen
opportunity. It's not even clear for x86 exactly when we should favor
test+set; some CPUs have better theoretical throughput for the ALU ops than
bt/test.
This patch is made more complicated than I expected because there's an early
DAGCombine for 'and' that can change types of the intermediate ops via
trunc+anyext.
Differential Revision: https://reviews.llvm.org/D66687
llvm-svn: 370668
The motivating case for this is a long way from here:
https://bugs.llvm.org/show_bug.cgi?id=43146
...but I think this is where we have to start.
We need to canonicalize/optimize sequences of shift and logic to ease
pattern matching for things like bswap and improve perf in general.
But without the artificial limit of '!LegalTypes' (early combining),
there are a lot of test diffs, and not all are good.
In the minimal tests added for this proposal, x86 should have better
throughput in all cases. AArch64 is neutral for scalar tests because
it can fold shifts into bitwise logic ops.
There are 3 shift opcodes and 3 logic opcodes for a total of 9 possible patterns:
https://rise4fun.com/Alive/VlIhttps://rise4fun.com/Alive/n1mhttps://rise4fun.com/Alive/1Vn
Differential Revision: https://reviews.llvm.org/D67021
llvm-svn: 370617
Narrowing stores when the target doesn't support the narrow version
forces the target to expand into a load-modify-store sequence, which
is highly suboptimal. The information narrowing throws away (legality
of the inverse transform) is hard to re-analyze. If the target doesn't
support a store of the narrow type, don't narrow even in pre-legalize
mode.
No test as this is DAGCombiner and depends on target bits.
llvm-svn: 370576
Pierre-vh