This removes a call to getScalarType from a bunch of call sites.
It also makes the behavior consistent with SIGN_EXTEND_INREG.
Differential Revision: https://reviews.llvm.org/D77631
These should not be assuming address space 0. Calling getPointerTy is
generally the wrong thing to do, since you should already know the
type from the incoming IR.
Move the logic whether lowering of deopt value requires a spill slot in
a separate lambda.
Reviewers: reames, dantrushin
Reviewed By: dantrushin
Subscribers: hiraditya, llvm-commits
Differential Revision: https://reviews.llvm.org/D77629
Summary:
A bug report mentioned that LLVM was producing jumps off the end of a
function when using "asm goto with outputs". Further digging pointed to
MachineBasicBlocks that had their address taken and were indirect
targets of INLINEASM_BR being removed by BranchFolder, because their
predecessor list was empty, so they appeared to have no entry.
This was a cascading failure caused earlier, during Pre-RA instruction
scheduling. We have a few special cases in Pre-RA instruction scheduling
where we split a MachineBasicBlock in two. This requires careful
handing of predecessor and successor lists for a MachineBasicBlock that
was split, and careful handing of PHI MachineInstrs that referred to the
MachineBasicBlock before it was split.
The clue that led to this fix was the observation that many callers of
MachineBasicBlock::splice() frequently call
MachineBasicBlock::transferSuccessorsAndUpdatePHIs() to update their PHI
nodes after a splice. We don't want to reuse that method, as we have
custom successor transferring logic for this block split.
This patch fixes 2 pre-existing bugs, and adds tests.
The first bug was that MachineBasicBlock::splice() correctly handles
updating most successors and predecessors; we don't need to do anything
more than removing the previous fallthrough block from the first half of
the split block post splice. Previously, we were updating the successor
list incorrectly (updating successors updates predecessors).
The second bug was that PHI nodes that needed registers from the first
half of the split block were not having entries populated. The register
live out information was correct, and the FuncInfo->PHINodesToUpdate was
correct. Specifically, the check in SelectionDAGISel::FinishBasicBlock:
for (unsigned i = 0, e = FuncInfo->PHINodesToUpdate.size(); i != e; ++i) {
MachineInstrBuilder PHI(*MF, FuncInfo->PHINodesToUpdate[i].first);
if (!FuncInfo->MBB->isSuccessor(PHI->getParent()))
continue;
PHI.addReg(FuncInfo->PHINodesToUpdate[i].second).addMBB(FuncInfo->MBB);
was `continue`ing because FuncInfo->MBB tracks the second half of
the post-split block; no one was updating PHI entries for the first half
of the post-split block.
SelectionDAGBuilder::UpdateSplitBlock() already expects to perform
special handling for MachineBasicBlocks that were split post calls to
ScheduleDAGSDNodes::EmitSchedule(), so I'm confident that it's both
correct for ScheduleDAGSDNodes::EmitSchedule() to return the second half
of the split block `CopyBB` which updates `FuncInfo->MBB` (ie. the
current MachineBasicBlock being processed), and perform special handling
for this in SelectionDAGBuilder::UpdateSplitBlock().
Reviewers: void, craig.topper, efriedma
Reviewed By: void, efriedma
Subscribers: hfinkel, fhahn, MatzeB, efriedma, hiraditya, llvm-commits, srhines
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D76961
The previous code used the type of the first field for the VT
passed to getNode for every field.
I've based the implementation here off what is done in visitSelect
as it removes the need to special case aggregates.
Differential Revision: https://reviews.llvm.org/D77093
Summary:
This is a roll forward of D77394 minus AlignmentFromAssumptions (which needs to be addressed separately)
Differences from D77394:
- DebugStr() now prints the alignment value or `None` and no more `Align(x)` or `MaybeAlign(x)`
- This is to keep Warning message consistent (CodeGen/SystemZ/alloca-04.ll)
- Removed a few unneeded headers from Alignment (since it's included everywhere it's better to keep the dependencies to a minimum)
Reviewers: courbet
Subscribers: sdardis, hiraditya, jrtc27, atanasyan, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D77537
We're ANDing with 1 right after which will cause the SIGN_EXTEND to
be combined to ANY_EXTEND later. Might as well just start with an
ANY_EXTEND.
While there replace create the AND using the getZeroExtendInReg
helper to remove the need to explicitly create the VecOnes constant.
This code is replacing a shift with a new shift on an extended type.
If the shift amount type can't represent the maximum shift amount
for the new type, the amount needs to be extended to a type that
can.
Previously, the code just hardcoded a check for 256 bits which
seems to have been an assumption that the original shift amount
was MVT::i8. But that seems more catered to a specific target
like X86 that uses i8 as its legal shift amount type. Other
targets may use different types.
This commit changes the code to look at the real type of the shift
amount and makes sure it has enough bits for the Log2 of the
new type. There are similar checks to this in SelectionDAGBuilder
and LegalizeIntegerTypes.
The newly-created constant zero will need an extra register to hold it
in the current statepoint lowering implementation. Remove it if there
exists one.
isGCValue should detect whether the deopt value is a GC pointer.
Currently it checks by finding the value in SI.Bases and SI.Ptrs.
However these data structures contain only those values which
have corresponding gc.relocate call. So we can miss GC value if it
does not have gc.relocate call (dead after the call).
Check GC strategy whether pointer is GC one or consider any pointer
to be GC one conservatively.
Reviewers: reames, dantrushin
Reviewed By: reames
Subscribers: hiraditya, llvm-commits
Differential Revision: https://reviews.llvm.org/D77130
Summary:
Currently, the comparison argument used for ATOMIC_CMP_XCHG is legalised
with GetPromotedInteger, which leaves the upper bits of the value
undefind. Since this is used for comparing in an LR/SC loop with a
full-width comparison, we must sign extend it. We introduce a new
getExtendForAtomicCmpSwapArg to complement getExtendForAtomicOps, since
many targets have compare-and-swap instructions (or pseudos) that
correctly handle an any-extend input, and the existing function
determines the extension of the result, whereas we are concerned with
the input.
This is related to https://reviews.llvm.org/D58829, which solved the
issue for ATOMIC_CMP_SWAP_WITH_SUCCESS, but not the simpler
ATOMIC_CMP_SWAP.
Reviewers: asb, lenary, efriedma
Reviewed By: asb
Subscribers: arichardson, hiraditya, rbar, johnrusso, simoncook, sabuasal, niosHD, kito-cheng, shiva0217, MaskRay, zzheng, edward-jones, rogfer01, MartinMosbeck, brucehoult, the_o, rkruppe, jfb, PkmX, jocewei, psnobl, benna, Jim, s.egerton, pzheng, sameer.abuasal, apazos, luismarques, evandro, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D74453
Currently, DAG combiner uses (fmul (rsqrt x) x) to estimate square
root of x. However, this method would return NaN if x is +Inf, which
is incorrect.
Reviewed By: spatel
Differential Revision: https://reviews.llvm.org/D76853
Summary: These were templated due to SelectionDAG using int masks for shuffles and IR using unsigned masks for shuffles. But now that D72467 has landed we have an int mask version of IRBuilder::CreateShuffleVector. So just use int instead of a template
Reviewers: spatel, efriedma, RKSimon
Reviewed By: efriedma
Subscribers: hiraditya, llvm-commits
Differential Revision: https://reviews.llvm.org/D77183
Instead, represent the mask as out-of-line data in the instruction. This
should be more efficient in the places that currently use
getShuffleVector(), and paves the way for further changes to add new
shuffles for scalable vectors.
This doesn't change the syntax in textual IR. And I don't currently plan
to change the bitcode encoding in this patch, although we'll probably
need to do something once we extend shufflevector for scalable types.
I expect that once this is finished, we can then replace the raw "mask"
with something more appropriate for scalable vectors. Not sure exactly
what this looks like at the moment, but there are a few different ways
we could handle it. Maybe we could try to describe specific shuffles.
Or maybe we could define it in terms of a function to convert a fixed-length
array into an appropriate scalable vector, using a "step", or something
like that.
Differential Revision: https://reviews.llvm.org/D72467
Summary:
In method SelectionDAGBuilder::LowerStatepoint, array SI.GCTransitionArgs
is initialized from wrong part of ImmutableStatepoint class.
We copy gc args instead of transitions args.
Reviewers: reames, skatkov
Subscribers: hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D77075
Summary:
This code was throwing away the opcode for a boolean, which was then
reconstructing the opcode from that boolean. Just pass the opcode, and
forget the boolean.
Reviewers: srhines
Reviewed By: srhines
Subscribers: hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D77100
Summary:
This change adds amdgcn.reloc.constant intrinsic to the amdgpu backend, which will compile into a relocation entry in the resulting elf.
The intrinsics takes a MetadataNode (String) as its only argument, which specifies the symbol name of the relocation entry.
`SelectionDAGBuilder::getValueImpl` is changed to allow metadata operands passed through to ISel.
Author: csyonghe <yonghe@google.com>
Reviewers: tpr, nhaehnle
Reviewed By: nhaehnle
Subscribers: arsenm, kzhuravl, jvesely, wdng, yaxunl, dstuttard, t-tye, hiraditya, kerbowa, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D76440
Summary:
This is patch is part of a series to introduce an Alignment type.
See this thread for context: http://lists.llvm.org/pipermail/llvm-dev/2019-July/133851.html
See this patch for the introduction of the type: https://reviews.llvm.org/D64790
Reviewers: courbet
Subscribers: jyknight, sdardis, nemanjai, hiraditya, kbarton, fedor.sergeev, asb, rbar, johnrusso, simoncook, sabuasal, niosHD, jrtc27, MaskRay, zzheng, edward-jones, atanasyan, rogfer01, MartinMosbeck, brucehoult, the_o, jfb, PkmX, jocewei, Jim, lenary, s.egerton, pzheng, sameer.abuasal, apazos, luismarques, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D77059
Summary:
Also deprecate getOriginalAlignment, getAlignment will take much more time as it is pervasive through the codebase (including TableGened files).
This is patch is part of a series to introduce an Alignment type.
See this thread for context: http://lists.llvm.org/pipermail/llvm-dev/2019-July/133851.html
See this patch for the introduction of the type: https://reviews.llvm.org/D64790
Reviewers: courbet
Subscribers: hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D76933
There was already a test case for landingpads to handle this case, but I
had forgotten to consider PHI instructions preceding the EH_LABEL in the
landingpad.
PR45261
Summary:
This is patch is part of a series to introduce an Alignment type.
See this thread for context: http://lists.llvm.org/pipermail/llvm-dev/2019-July/133851.html
See this patch for the introduction of the type: https://reviews.llvm.org/D64790
Reviewers: courbet
Subscribers: arsenm, dschuff, sdardis, nemanjai, jvesely, nhaehnle, sbc100, jgravelle-google, hiraditya, aheejin, kbarton, jrtc27, atanasyan, jfb, kerbowa, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D76925
Summary: This patch is the first effort to adding basic optimizations for FREEZE in SelDag.
Reviewers: spatel, lebedev.ri
Reviewed By: spatel
Subscribers: xbolva00, hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D76707
These transforms rely on a vector reduction flag on the SDNode
set by SelectionDAGBuilder. This flag exists because SelectionDAG
can't see across basic blocks so SelectionDAGBuilder is looking
across and saving the info. X86 is the only target that uses this
flag currently. By removing the X86 code we can remove the flag
and the SelectionDAGBuilder code.
This pass adds a dedicated IR pass for X86 that looks across the
blocks and transforms the IR into a form that the X86 SelectionDAG
can finish.
An advantage of this new approach is that we can enhance it to
shrink the phi nodes and final reduction tree based on the zeroes
that we need to concatenate to bring the partially reduced
reduction back up to the original width.
Differential Revision: https://reviews.llvm.org/D76649
In some scalarize/split result methods (unary, binary, ...), flags in
SDNode were not passed down, which may lead to unexpected results in
unsafe float-point optimization. This patch fixes them. (maybe not
complete)
Reviewed By: spatel
Differential Revision: https://reviews.llvm.org/D76832
I think we can save the MRI argument from these since it's in
GISelKnownBits already, but currently not accessible.
Implementation deferred to avoid dependency on other patches.
We have some long-standing missing shuffle optimizations that could
use this transform via VectorCombine now:
https://bugs.llvm.org/show_bug.cgi?id=35454
(and we still don't get that case in the backend either)
This function is apparently templated because there's existing code
in IR that treats mask values as unsigned and backend code that
treats masks values as signed.
The mask values are not endian-dependent (as shown by the existing
bitcast transform from DAGCombiner).
Differential Revision: https://reviews.llvm.org/D76508
Summary:
This is patch is part of a series to introduce an Alignment type.
See this thread for context: http://lists.llvm.org/pipermail/llvm-dev/2019-July/133851.html
See this patch for the introduction of the type: https://reviews.llvm.org/D64790
Reviewers: courbet
Subscribers: dylanmckay, sdardis, nemanjai, hiraditya, kbarton, asb, rbar, johnrusso, simoncook, sabuasal, niosHD, jrtc27, MaskRay, zzheng, edward-jones, atanasyan, rogfer01, MartinMosbeck, brucehoult, the_o, PkmX, jocewei, Jim, lenary, s.egerton, pzheng, sameer.abuasal, apazos, luismarques, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D76551
When decided whether to generate a post-inc load/store, look at the
other memory nodes that use the same base address and, if any proceed
the current node, then don't do the combine.
The change only seems to be affecting the Arm backend, which I was
surprised at, but it appears to fix a lot of our issues around MVE
masked load/stores having to store a temporary address after an early
post-increment on a shared base address.
Differential Revision: https://reviews.llvm.org/D75847
Extract the decision to combine into a post-inc address into a
couple of functions to make the logic more clear and re-usable.
Differential Revision: https://reviews.llvm.org/D76060
For folding pattern `x-(fma y,z,u*v) -> (fma -y,z,(fma -u,v,x))`, if
`yz` is 1, `uv` is -1 and `x` is -0, sign of result would be changed.
Differential Revision: https://reviews.llvm.org/D76419
Technically we can permit EXTLOAD of the LHS operand but only if all the extended bits are shifted out. Until we test coverage for that case, I'm just disabling this to fix PR45265.
Summary:
It can be the case that a vector type is legal but the corresponding
scalar type is not legal for an architecture (i8 vs. v16i8 on AArch64).
Check if the scalar type created when folding
truncate(build_vector(x,y)) -> build_vector(truncate(x),truncate(y))
is legal if we are running after the type legalizer.
This fixes https://github.com/android/ndk/issues/1207.
Reviewers: RKSimon, srhines
Subscribers: kristof.beyls, hiraditya, danielkiss, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D76312
Summary:
For some reason the order in which we call getNegatedExpression
for the involved operands, after a call to isCheaperToUseNegatedFPOps,
seem to matter. This patch includes a new test case in
test/CodeGen/X86/fdiv.ll that crashes if we reverse the order of
those calls. Before this patch that could happen depending on
which compiler that were used when buildind llvm. With my GCC
version (7.4.0) I got the crash, because it seems like it is
using a different order for the argument evaluation compared
to clang.
All other users of isCheaperToUseNegatedFPOps already used this
pattern with unfolded/ordered calls to getNegatedExpression, so
this patch is aligning visitFDIV with the other use cases.
This patch simply deals with the non-determinism for FDIV. While
the underlying problem with getNegatedExpression is discussed
further in D76439.
Reviewers: spatel, RKSimon
Reviewed By: spatel
Subscribers: hiraditya, mgrang, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D76319
Summary:
* Remove a bunch of asserts checking for unsupported scalable types and
add some more now that they are supported.
* Propagate the scalable flag where necessary.
* Add another `EVT::getExtendedVectorVT` method that takes an
ElementCount parameter.
* Add `EVT::isExtendedScalableVector` and
`EVT::getExtendedVectorElementCount` - latter is currently unused.
Reviewers: sdesmalen, efriedma, rengolin, craig.topper, huntergr
Reviewed By: efriedma
Subscribers: hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D75672
Gather/scatter don't access one memory location, they access multiple disjoint locations. So using a fixed size isn't accurate. But we don't have a way to represent the true behavior so just use UnknownSize.
Previously we "split" the memory VT and use that size for the MMO of each half. But the memory VT is scalar so splitting usually just returned the original scalar VT, but on 32-bit X86 if the scalar VT was i64 it probably returned i32?
Differential Revision: https://reviews.llvm.org/D76388
SelectionDAG CSEs nodes based on their result type and operands, but not their flags. The flags are expected to be intersected when they are CSEd. In SelectionDAGBuilder, for FP nodes we manage both the fast math flags and the nofpexcept flag after the nodes have already been CSEd when they were created with getNode. The management of the fastmath flags before the constrained nodes prevents the nofpexcept management from working correctly.
This commit moves the FMF handling for constrained intrinsics into their visitor and disables the common FMF handling for these nodes.
Differential Revision: https://reviews.llvm.org/D75224
If it is a*b-c*d, it could be also folded into fma(a, b, -c*d) or fma(-c, d, a*b).
This patch is trying to respect the uses of a*b and c*d to make the best choice.
Differential Revision: https://reviews.llvm.org/D75982
ISD::ROTL/ROTR rotation values are guaranteed to act as a modulo amount, so for power-of-2 bitwidths we only need the lowest bits.
Differential Revision: https://reviews.llvm.org/D76201
I believe we were previously calculating a pointer info with the scalar base and an offset of 0. But that's not really where the gather is pointing. The offset is a function of the indices of the GEP we looked through.
Also set the size of the MachineMemOperand to UnknownSize
Differential Revision: https://reviews.llvm.org/D76157
Under certain circumstances we'll end up in the position where the negated shift amount will get truncated to the type specified getScalarShiftAmountTy(), so we need to test for a truncated version of the shift amount as well.
This allows us to remove half of the remaining patterns tested for by X86ISelLowering's combineOrShiftToFunnelShift.
Followup to D75114, this patch reuses the existing MatchRotate ROTL/ROTR rotation pattern code to also recognize the more general FSHL/FSHR funnel shift patterns when we have variable shift amounts, matched with MatchFunnelPosNeg which acts in an (almost) equivalent manner to MatchRotatePosNeg.
Summary:
Using the default DAG.UnrollVectorOp on v16i8 and v8i16 vectors
results in i8 or i16 nodes being inserted into the SelectionDAG. Since
those are illegal types, this causes a legalization assertion failure
for some code patterns, as uncovered by PR45178. This change unrolls
shifts manually to avoid this issue by adding and using a new optional
EVT argument to DAG.ExtractVectorElements to control the type of the
extract_element nodes.
Reviewers: aheejin, dschuff
Subscribers: sbc100, jgravelle-google, hiraditya, sunfish, zzheng, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D76043
Summary:
This patch adds the following intrinsics for non-temporal gather loads
and scatter stores:
* aarch64_sve_ldnt1_gather_index
* aarch64_sve_stnt1_scatter_index
These intrinsics implement the "scalar + vector of indices" addressing
mode.
As opposed to regular and first-faulting gathers/scatters, there's no
instruction that would take indices and then scale them. Instead, the
indices for non-temporal gathers/scatters are scaled before the
intrinsics are lowered to `ldnt1` instructions.
The new ISD nodes, GLDNT1_INDEX and SSTNT1_INDEX, are only used as
placeholders so that we can easily identify the cases implemented in
this patch in performGatherLoadCombine and performScatterStoreCombined.
Once encountered, they are replaced with:
* GLDNT1_INDEX -> SPLAT_VECTOR + SHL + GLDNT1
* SSTNT1_INDEX -> SPLAT_VECTOR + SHL + SSTNT1
The patterns for lowering ISD::SHL for scalable vectors (required by
this patch) were missing, so these are added too.
Reviewed By: sdesmalen
Differential Revision: https://reviews.llvm.org/D75601
This is a reimplementation of the optimization removed in D75964. The actual spill/fill optimization is handled by D76013, this one just worries about reducing the stackmap section size itself by eliminating redundant entries. As noted in the comments, we could go a lot further here, but avoiding the degenerate invoke case as we did before is probably "enough" in practice.
Differential Revision: https://reviews.llvm.org/D76021
Summary:
callbr's indirect branches aren't expected to be taken, so reduce their
probabilities to 0 while increasing the default destination to 1. This
allows some code improvements through block placement.
Reviewers: nickdesaulniers
Subscribers: hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D72656
We just removed a broken duplicate elimination algorithm in D75964, and after landed that it occurred to me that duplicate elimination is simply CSE. SelectionDAG has a build in CSE, so why wasn't that triggering? Well, it turns out we were overly conservative in the memory states for our reloads and CSE (rightly) considers the incoming memory state for a load part of the identity of the load.
By loosening the chain and allowing reordering, we also allow CSE. As shown in the test case, doing iterative CSE as we go is enough to eliminate duplicate stores in later statepoints as well. We key our (block local) slot map by SDValue, so commoning a previous pair of loads at construction time means we also common following stores.
Differential Revision: https://reviews.llvm.org/D76013
This patch reuses the existing MatchRotate ROTL/ROTR rotation pattern code to also recognize the more general FSHL/FSHR funnel shift patterns when we have constant shift amounts.
Differential Revision: https://reviews.llvm.org/D75114
A downstream test case (see included reduced test) revealed that we have a bug in how we handle duplicate relocations. If we have the same SDValue relocated twice, and that value happens to be a constant (such as null), we only export one of the two llvm::Values. Exporting on a per llvm::Value basis is required to allow lowering of gc.relocates in following basic blocks (e.g. invokes). Without it, we end up with a use of an undefined vreg and bad things happen.
Rather than fixing the optimization - which appears to be hard - I propose we simply remove it. There are no tests in tree that change with this code removed. If we find out later that this did matter for something, we can reimplement a variation of this in CodeGenPrepare to catch the easy cases without complicating the lowering code.
Thanks to Denis and Serguei who did all the hard work of figuring out what went wrong here. The patch is by far the easy part. :)
Differential Revision: https://reviews.llvm.org/D75964
As noted on D75114, if both arguments of a funnel shift are consecutive loads we are missing the opportunity to combine them into a single load.
Differential Revision: https://reviews.llvm.org/D75624
PowerPC hits an assertion due to somewhat the same reason as https://reviews.llvm.org/D70975.
Though there are already some hack, it still failed with some case, when the operand 0 is NOT
a const fp, it is another fma that with const fp. And that const fp is negated which result in multi-uses.
A better fix is to check the uses of the negated const fp. If there are already use of its negated
value, we will have benefit as no extra Node is added.
Differential revision: https://reviews.llvm.org/D75501
As discussed in the commit thread for rGa253a2a and D73978, we can do more undef folding for FP ops.
The nnan and ninf fast-math-flags specify that if an operand is the disallowed value, the result is
poison, so we can produce an undef result.
But this doesn't work as expected (the undef operand cases remain) because of a Flags propagation
problem in SelectionDAGBuilder.
I've added DAGCombiner calls to enable these for the other cases because we've shown in other
patches that (because of the limited way that SDAG iterates), it is possible to miss simplifications
like this if they are done only at node creation time.
Several potential follow-ups to expand on this patch are possible.
Differential Revision: https://reviews.llvm.org/D75576
Summary:
Follow up from D75377. If the subvector is byte sized and the
index is aligned to the subvector size, we can shrink the load.
Reviewers: spatel, RKSimon
Reviewed By: RKSimon
Subscribers: dbabokin, hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D75434
I expect that the isCondCodeLegal checks should match that CC of
the node that we're going to create.
Rewriting to a switch to minimize repeated mentions of the same
constants.
The address calculation for the offset assumes that you can calculate the offset by multiplying the index by the store size of the element. But that only works if the element's store size is exactly its real size since we store vectors tightly packed in memory. There are improvements we could make to this like special casing extracting element 0. I think we could also handle cases where the extracted VT is byte sized and the index is aligned with the extract element count.
Differential Revision: https://reviews.llvm.org/D75377
Select_cc isn't used by all targets. X86 doesn't have optimizations
for it.
Since we already know the input to the sint_to_fp/uint_to_fp is
a setcc we can just emit a plain select using that setcc as the
condition. Other DAG combines can turn that into a select_cc on
targets that support it.
Differential Revision: https://reviews.llvm.org/D75415
We get the simple cases of this via demanded elements and other folds,
but that doesn't work if the values have >1 use, so add a dedicated
match for the pattern.
We already have this transform in IR, but it doesn't help the
motivating x86 tests (based on PR42024) because the shuffles don't
exist until after legalization and other combines have happened.
The AArch64 test shows a minimal IR example of the problem.
Differential Revision: https://reviews.llvm.org/D75348
The alias analysis in DAG Combine looks at the BaseAlign, the Offset and
the Size of two accesses, and determines if they are known to access
different parts of memory by the fact that they are different offsets
from inside that "alignment window". It does not seem to account for
accesses that are not a multiple of the size, and may overflow from one
alignment window into another.
For example in the test case we have a 19byte memset that is splits into
a 16 byte neon store and an unaligned 4 byte store with a 15 byte
offset. This 15byte offset (with a base align of 8) wraps around to the
next alignment windows. When compared to an access that is a 16byte
offset (of the same 4byte size and 8byte basealign), the two accesses
are said not to alias.
I've fixed this here by just ensuring that the offsets are a multiple of
the size, ensuring that they don't overlap by wrapping. Fixes PR45035,
which was exposed by the UseAA changes in the arm backend.
Differential Revision: https://reviews.llvm.org/D75238
We can only report the knownbits for a SCALAR_TO_VECTOR node if we only demand the 0'th element - the upper elements are undefined and shouldn't be trusted.
This is causing a number of regressions that need addressing but we need to get the bugfix in first.
According to Joseph Myers, a libm maintainer
> They were only ever an ABI (selected by use of -ffinite-math-only or
> options implying it, which resulted in the headers using "asm" to redirect
> calls to some libm functions), not an API. The change means that ABI has
> turned into compat symbols (only available for existing binaries, not for
> anything newly linked, not included in static libm at all, not included in
> shared libm for future glibc ports such as RV32), so, yes, in any case
> where tools generate direct calls to those functions (rather than just
> following the "asm" annotations on function declarations in the headers),
> they need to stop doing so.
As a consequence, we should no longer assume these symbols are available on the
target system.
Still keep the TargetLibraryInfo for constant folding.
Differential Revision: https://reviews.llvm.org/D74712
This may inhibit vector narrowing in general, but there's
already an inconsistency in the way that we deal with this
pattern as shown by the test diff.
We may want to add a dedicated function for narrowing fneg.
It's often folded into some other op, so moving it away from
other math ops may cause regressions that we would not see
for normal binops.
See D73978 for more details.
This node reads the rounding control which means it needs to be ordered properly with operations that change the rounding control. So it needs to be chained to maintain order.
This patch adds a chain input and output to the node and connects it to the chain in SelectionDAGBuilder. I've update all in-tree targets to connect their chain through their lowering code.
Differential Revision: https://reviews.llvm.org/D75132
Summary:
Terminators in LLVM aren't prohibited from returning values. This means that
the "callbr" instruction, which is used for "asm goto", can support "asm goto
with outputs."
This patch removes all restrictions against "callbr" returning values. The
heavy lifting is done by the code generator. The "INLINEASM_BR" instruction's
a terminator, and the code generator doesn't allow non-terminator instructions
after a terminator. In order to correctly model the feature, we need to copy
outputs from "INLINEASM_BR" into virtual registers. Of course, those copies
aren't terminators.
To get around this issue, we split the block containing the "INLINEASM_BR"
right before the "COPY" instructions. This results in two cheats:
- Any physical registers defined by "INLINEASM_BR" need to be marked as
live-in into the block with the "COPY" instructions. This violates an
assumption that physical registers aren't marked as "live-in" until after
register allocation. But it seems as if the live-in information only
needs to be correct after register allocation. So we're able to get away
with this.
- The indirect branches from the "INLINEASM_BR" are moved to the "COPY"
block. This is to satisfy PHI nodes.
I've been told that MLIR can support this handily, but until we're able to
use it, we'll have to stick with the above.
Reviewers: jyknight, nickdesaulniers, hfinkel, MaskRay, lattner
Reviewed By: nickdesaulniers, MaskRay, lattner
Subscribers: rriddle, qcolombet, jdoerfert, MatzeB, echristo, MaskRay, xbolva00, aaron.ballman, cfe-commits, JonChesterfield, hiraditya, llvm-commits, rnk, craig.topper
Tags: #llvm, #clang
Differential Revision: https://reviews.llvm.org/D69868
This is the second patch as part of https://bugs.llvm.org/show_bug.cgi?id=36544
Merging in the ConstantSDNode variant of FoldConstantArithmetic. After this, I will begin merging in FoldConstantVectorArithmetic
I've ensured this patch can build & pass all lit tests in Windows and Linux environments.
Patch by @justice_adams (Justice Adams)
Differential Revision: https://reviews.llvm.org/D74881
Summary:
This patch adds intrinsics and ISelDAG nodes for signed
and unsigned fixed-point division:
```
llvm.sdiv.fix.sat.*
llvm.udiv.fix.sat.*
```
These intrinsics perform scaled, saturating division
on two integers or vectors of integers. They are
required for the implementation of the Embedded-C
fixed-point arithmetic in Clang.
Reviewers: bjope, leonardchan, craig.topper
Subscribers: hiraditya, jdoerfert, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D71550
A question about this behavior came up on llvm-dev:
http://lists.llvm.org/pipermail/llvm-dev/2020-February/139003.html
...and as part of backend improvements in D73978.
We decided not to implement a more general change that would have
folded any FP binop with nearly arbitrary constant + undef operand
to undef because that is not theoretically correct (even if it is
practically correct).
This is the SDAG-equivalent to the IR change in D74713.
Use the SelectionDAG::getValidShiftAmountConstant helper to get const/constsplat shift amounts, which allows us to drop the out of range shift amount early-out.
First step towards better non-uniform shift amount support in SimplifyDemandedBits.
This includes both GEPs where the indexed type is a scalable vector, and
GEPs where the result type is a scalable vector.
Differential Revision: https://reviews.llvm.org/D73602
Similar to what we already do with SimplifyDemandedVectorElts, call SimplifyDemandedBits across all the extracted elements of the source vector, treating it as single use.
There's a minor regression in store-weird-sizes.ll which will be addressed in an upcoming SimplifyDemandedBits patch.
This reverts commit 649aba93a2, now that
the approach started there has been shown to be workable in the patch
series culminating in https://reviews.llvm.org/D74192.
This patch enables the debug entry values feature.
- Remove the (CC1) experimental -femit-debug-entry-values option
- Enable it for x86, arm and aarch64 targets
- Resolve the test failures
- Leave the llc experimental option for targets that do not
support the CallSiteInfo yet
Differential Revision: https://reviews.llvm.org/D73534
Summary:
Backends should fold the subtraction into the comparison, but not all
seem to. Moreover, on targets where pointers are not integers, such as
CHERI, an integer subtraction is not appropriate. Instead we should just
compare the two pointers directly, as this should work everywhere and
potentially generate more efficient code.
Reviewers: bogner, lebedev.ri, efriedma, t.p.northover, uweigand, sunfish
Reviewed By: lebedev.ri
Subscribers: dschuff, sbc100, arichardson, jgravelle-google, hiraditya, aheejin, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D74454
These are going to be useful in TargetLowering::SimplifyDemandedBits, so expose these helpers outside of SelectionDAG.cpp
Also add an getValidShiftAmountConstant early-out to getValidMinimumShiftAmountConstant/getValidMaximumShiftAmountConstant so we can use them for scalar cases as well.
Summary:
This patch implements the part of the calling convention
where SVE Vectors are passed by reference. This means the
caller must allocate stack space for these objects and
pass the address to the callee.
Reviewers: efriedma, rovka, cameron.mcinally, c-rhodes, rengolin
Reviewed By: efriedma
Subscribers: tschuett, kristof.beyls, hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D71216
This adds another pattern to the combiner for a case that we were not handling
to generate the REV16 instruction for ARM/Thumb2 and a bswap+ror on X86.
Differential Revision: https://reviews.llvm.org/D74032
Summary:
When using strict fp, it is required to update the
chain when performing integer type promotion of a
operand to a integer to floating point conversion.
Reviewers: craig.topper, john.brawn
Reviewed By: craig.topper
Subscribers: kristof.beyls, hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D74597
Patchable statepoint is lowered into sequence of nops, so zeroed call target
should not be on register. It is better to use getTargetConstant instead
of getConstant to select zero constant for call target.
Reviewers: reames
Reviewed By: reames
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D74465
Summary:
This was a very odd API, where you had to pass a flag into a zext
function to say whether the extended bits really were zero or not. All
callers passed in a literal true or false.
I think it's much clearer to make the function name reflect the
operation being performed on the value we're tracking (rather than on
the KnownBits Zero and One fields), so zext means the value is being
zero extended and new function anyext means the value is being extended
with unknown bits.
NFC.
Subscribers: hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D74482
The isNegatibleForFree/getNegatedExpression methods currently rely on a raw char value to indicate whether a negation is beneficial or not.
This patch replaces the char return value with an NegatibleCost enum to more clearly demonstrate what is implied.
It also renames isNegatibleForFree to getNegatibleCost to more accurately reflect whats going on.
Differential Revision: https://reviews.llvm.org/D74221
This patch enables the debug entry values feature.
- Remove the (CC1) experimental -femit-debug-entry-values option
- Enable it for x86, arm and aarch64 targets
- Resolve the test failures
- Leave the llc experimental option for targets that do not
support the CallSiteInfo yet
Differential Revision: https://reviews.llvm.org/D73534
Summary:
The method attempts to find loads that can be legally clustered by
looking for loads consuming the same chain glue token.
However, the old code looks at _all_ users of values produced by the
chain node -- including uses of the loaded/returned value of volatile
loads or atomics. This could lead to circular dependencies which then
failed during scheduling.
With this change, we filter out users by getResNo, i.e. by which
SDValue value they use, to ensure that we only look at users of the
chain glue token.
This appears to be a rather old bug, which is perhaps surprising.
However, the test case is actually quite fragile (i.e., it is hidden
by fairly small changes), and the test _must_ use volatile loads for
the bug to manifest.
Reviewers: arsenm, bogner, craig.topper, foad
Subscribers: MatzeB, jvesely, wdng, hiraditya, javed.absar, jfb, kerbowa, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D74253
This adds a strict version of FP16_TO_FP and FP_TO_FP16 and uses
them to implement soft promotion for the half type. This is
enough to provide basic support for __fp16 with strictfp.
Add the necessary X86 support to use VCVTPS2PH/VCVTPH2PS when F16C
is enabled.
Add a simplification to fuse a manual vector extract with shifts and
truncate into a bitcast.
Unpacking and packing values into vectors is only optimized with
extractelement instructions, not when manually unpacked using shifts
and truncates.
This patch simplifies shifts and truncates into a bitcast if possible.
Simplify (build_vec (trunc $1)
(trunc (srl $1 width))
(trunc (srl $1 (2 * width))) ...)
to (bitcast $1)
Differential Revision: https://reviews.llvm.org/D73892
Remove code from LegalizeTypes that allowed this to work.
We were already using BUILD_PAIR for this in some places so this
standardizes on a single way to do this.
Summary:
For CTTZ we place a set bit just past where the non-promoted type
stopped so the extended bits won't be used for the count. For
CTTZ_ZERO_UNDEF we don't care what happens if no bits are set in
the original type and we end up counting into the extended bits.
So we can just use ANY_EXTEND for both cases.
This matches what is done in type legalization for these operations.
We make no effort to force the upper bits to zero.
Differential Revision: https://reviews.llvm.org/D74111
Add the isCandidateForCallSiteEntry predicate to MachineInstr to
determine whether a DWARF call site entry should be created for an
instruction.
For now, it's enough to have any call instruction that doesn't belong to
a blacklisted set of opcodes. For these opcodes, a call site entry isn't
meaningful.
Differential Revision: https://reviews.llvm.org/D74159
Summary: This patch introduces an API for MemOp in order to simplify and tighten the client code.
Reviewers: courbet
Subscribers: arsenm, nemanjai, jvesely, nhaehnle, hiraditya, kbarton, jsji, kerbowa, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D73964
This reverts commit ed29dbaafa.
I'm backing out D68945, which as the discussion for D73526 shows, doesn't
seem to handle the -O0 path through the codegen backend correctly. I'll
reland the patch when a fix is worked out, apologies for all the churn.
The two parent commits are part of this revert too.
Conflicts:
llvm/lib/CodeGen/SelectionDAG/SelectionDAGBuilder.cpp
llvm/test/DebugInfo/X86/dbg-addr-dse.ll
SelectionDAGBuilder conflict is due to a nearby change in e39e2b4a79
that's technically unrelated. dbg-addr-dse.ll conflicted because
41206b61e3 (legitimately) changes the order of two lines.
There are further modifications to dbg-value-func-arg.ll: it landed after
the patch being reverted, and I've converted indirection to be represented
by the isIndirect field rather than DW_OP_deref.
This reverts commit 3137fe4d23.
I'm backing out D68945, which this patch is a follow up for. It'll be
re-landed when D68945 is fixed.
The changes to dbg-value-func-arg.ll occur because our handling of certain
kinds of location now mixes up indirection that happens at different points
in a DIExpression. While this is a regression, it's a return to the prior
behaviour while a better patch is sought.
This reverts commit 2d3174c4df.
The overall solution for this problem is reverting D68945, which wasn't
handling the -O0 path through the codegen backend correctly. See:
discussion in D73526.
Summary:
This reverts commit 3ef169e586. The
purpose of this commit was to allow stack machines to perform
instruction selection for instructions with variadic defs. However,
MachineInstrs fundamentally cannot support variadic defs right now, so
this change does not turn out to be useful.
Depends on D73927.
Reviewers: aheejin
Subscribers: dschuff, sbc100, jgravelle-google, hiraditya, sunfish, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D73928
The CATCHPAD node mostly existed to be selected into the EH_RESTORE
instruction, which sets the frame back up when 32-bit Windows exceptions
return to the parent function. However, creating this MachineInstr early
increases the risk that other passes will come along and insert
instructions that use the stack before ESP and EBP are restored. That
happened in PR44697.
Instead of representing these in the instruction stream early, delay it
until PEI. Mark the blocks where this needs to happen as EHPads, but not
funclet entry blocks. Passes after PEI have to be careful not to hoist
instructions that can use stack across frame setup instructions, so this
should be relatively reliable.
Fixes PR44697
Reviewed By: hans
Differential Revision: https://reviews.llvm.org/D73752
AMDGPU and x86 at least both have separate controls for whether
denormal results are flushed on output, and for whether denormals are
implicitly treated as 0 as an input. The current DAGCombiner use only
really cares about the input treatment of denormals.
Ensure that OptLevelChanger::SavedFastISel is initialized in the constructor.
This should be NFC - as the equivalent 'same opt level' early-out is used in the destructor as well, so SavedFastISel is only actually referenced in the general case.
Differential Revision: https://reviews.llvm.org/D73875
Under MVE, we do not have any lowering for fminimum, which a
vector_reduce_fmin without NoNan will be expanded into. As with the
other recent patches, force this to expand in the pre-isel pass. Note
that Neon lowering would be OK because the scalar fminimum uses the
vector VMIN instruction, but is probably better to just rely on the
scalar operations, which is what is done here.
Also fixes what appears to be the reversal of INF vs -INF in the
vector_reduce_fmin widening code.
We have to be careful in SimplifyDemandedBits with loads in case we attempt to combine back to a constant (which then gets turned into a constant pool load again), but we can at least set the upper KnownBits for a ZEXTLoad to zero.
Summary:
This is patch is part of a series to introduce an Alignment type.
See this thread for context: http://lists.llvm.org/pipermail/llvm-dev/2019-July/133851.html
See this patch for the introduction of the type: https://reviews.llvm.org/D64790
Reviewers: courbet
Subscribers: arsenm, dschuff, jyknight, sdardis, nemanjai, jvesely, nhaehnle, sbc100, jgravelle-google, hiraditya, aheejin, kbarton, fedor.sergeev, asb, rbar, johnrusso, simoncook, sabuasal, niosHD, jrtc27, MaskRay, zzheng, edward-jones, atanasyan, rogfer01, MartinMosbeck, brucehoult, the_o, PkmX, jocewei, jsji, Jim, lenary, s.egerton, pzheng, sameer.abuasal, apazos, luismarques, kerbowa, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D73885
Summary:
A Copy with a source that is zeros is the same as a Set of zeros.
This fixes the invariant that SrcAlign should always be non-null.
Reviewers: courbet
Subscribers: hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D73791
This is based on this llvm-dev thread http://lists.llvm.org/pipermail/llvm-dev/2019-December/137521.html
The current strategy for f16 is to promote type to float every except where the specific width is required like loads, stores, and bitcasts. This results in rounding occurring in odd places instead of immediately after arithmetic operations. This interacts in weird ways with the __fp16 type in clang which is a storage only type where arithmetic is always promoted to float. InstCombine can remove some fpext/fptruncs around such arithmetic and turn it into arithmetic on half. This wouldn't be so bad if SelectionDAG was able to put those fpext/fpround back in when it promotes.
It is also not obvious how to handle to make the existing strategy work with STRICT fp. We need to use STRICT versions of the conversions which require chain operands. But if the conversions are created for a bitcast, there is no place to get an appropriate chain from.
This patch implements a different strategy where conversions are emitted directly around arithmetic operations. And otherwise its passed around as an i16 including in arguments and return values. This can result in more conversions between arithmetic operations, but is closer to matching the IR the frontend generates for __fp16. And it will allow us to use the chain from constrained arithmetic nodes to link the STRICT_FP_TO_FP16/STRICT_FP16_TO_FP that will need to be added. I've set it up so that each target can opt into the new behavior. Converting all the targets myself was more than I was able to handle.
Differential Revision: https://reviews.llvm.org/D73749
This allows SimplifyDemandedBits to call SimplifyMultipleUseDemandedBits to create a simpler ISD::INSERT_SUBVECTOR, which is particularly useful for cases where we're splitting into subvectors anyhow.
Summary: This is a first step before changing the types to llvm::Align and introduce functions to ease client code.
Reviewers: courbet
Subscribers: arsenm, sdardis, nemanjai, jvesely, nhaehnle, hiraditya, kbarton, jrtc27, atanasyan, jsji, kerbowa, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D73785
This patch addresses the issue found in https://bugs.llvm.org/show_bug.cgi?id=44585
where a DW_OP_deref was placed at the end of a dwarf expression, resulting in corrupt
symbols when debugging.
This is an attempt to reland with a few fixes for buildbot since I
haven't merged from master in a bit.
Differential Revision: https://reviews.llvm.org/D73526
This is how it should've been and brings it more in line with
std::string_view. There should be no functional change here.
This is mostly mechanical from a custom clang-tidy check, with a lot of
manual fixups. It uncovers a lot of minor inefficiencies.
This doesn't actually modify StringRef yet, I'll do that in a follow-up.
Summary:
This is a follow up on D61634. It adds an LLVM IR intrinsic to allow better implementation of memcpy from C++.
A follow up CL will add the intrinsics in Clang.
Reviewers: courbet, theraven, t.p.northover, jdoerfert, tejohnson
Subscribers: hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D71710
This allows SimplifyDemandedBits to call SimplifyMultipleUseDemandedBits to create a simpler ISD::EXTRACT_SUBVECTOR, which is particularly useful for cases where we're splitting into subvectors anyhow.
Differential Revision: This allows SimplifyDemandedBits to call SimplifyMultipleUseDemandedBits to create a simpler ISD::EXTRACT_SUBVECTOR, which is particularly useful for cases where we're splitting into subvectors anyhow.
and macro FUNCTION likewise. NFCI.
Some functions like fmuladd don't really have a node, we should divide
the declaration form those have node to avoid introducing fake nodes.
Differential Revision: https://reviews.llvm.org/D72871
Updated FoldConstantArithmetic method signature to match that of
FoldConstantVectorArithmetic in preparation for merging the two
functions together
https://bugs.llvm.org/show_bug.cgi?id=36544
This is the first step in combining the various
FoldConstantVectorArithmetic and FoldConstantVectorArithmetic
functions into one FoldConstantArithmetic function.
Differential Revision: https://reviews.llvm.org/D72870
Unlike the existing code that I modified here, I only handle the
case where the strict_fsetcc has a single use. Not sure exactly
how to handle multiples uses.
Testing this on X86 is hard because we already have a other
combines that get rid of lowered version of the integer setcc that
this xor will eventually become. So this combine really just
saves a bunch of extra nodes being created. Not sure about other
targets.
Differential Revision: https://reviews.llvm.org/D71816
Summary:
This is a follow up on https://reviews.llvm.org/D71473#inline-647262.
There's a caveat here that `Align(1)` relies on the compiler understanding of `Log2_64` implementation to produce good code. One could use `Align()` as a replacement but I believe it is less clear that the alignment is one in that case.
Reviewers: xbolva00, courbet, bollu
Subscribers: arsenm, dylanmckay, sdardis, nemanjai, jvesely, nhaehnle, hiraditya, kbarton, jrtc27, atanasyan, jsji, Jim, kerbowa, cfe-commits, llvm-commits
Tags: #clang, #llvm
Differential Revision: https://reviews.llvm.org/D73099
Match the approach in SimplifyDemandedBits where we calculate the demanded elts and then have a common path for the ComputeKnownBits/ComputeNumSignBits call.
Match the approach in SimplifyDemandedBits/ComputeNumSignBits where we calculate the demanded elts and then have a common path for the ComputeKnownBits call.
Match the approach in SimplifyDemandedBits where we calculate the demanded elts and then have a common path for the ComputeKnownBits/ComputeNumSignBits call, additionally we only ever need original demanded elts of the base vector even if the index is unknown.
This patch also fixes up a number of cases in DAGCombine and
SelectionDAGBuilder where the size of a scalable vector is used in a
fixed-width context (thus triggering an assertion failure).
Reviewers: efriedma, c-rhodes, rovka, cameron.mcinally
Reviewed By: efriedma
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D71215
In LLVM IR, vscale can be represented with an intrinsic. For some targets,
this is equivalent to the constexpr:
getelementptr <vscale x 1 x i8>, <vscale x 1 x i8>* null, i32 1
This can be used to propagate the value in CodeGenPrepare.
In ISel we add a node that can be legalized to one or more
instructions to materialize the runtime vector length.
This patch also adds SVE CodeGen support for VSCALE, which maps this
node to RDVL instructions (for scaled multiples of 16bytes) or CNT[HSD]
instructions (scaled multiples of 2, 4, or 8 bytes, respectively).
Reviewers: rengolin, cameron.mcinally, hfinkel, sebpop, SjoerdMeijer, efriedma, lattner
Reviewed by: efriedma
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D68203
Summary:
WebAssembly is unique among upstream targets in that it does not at
any point use physical registers to store values. Instead, it uses
virtual registers to model positions in its value stack. This means
that some target-independent lowering activities that would use
physical registers need to use virtual registers instead for
WebAssembly and similar downstream targets. This CL generalizes the
existing `usesPhysRegsForPEI` lowering hook to
`usesPhysRegsForValues` in preparation for using it in more places.
One such place is in InstrEmitter for instructions that have variadic
defs. On register machines, it only makes sense for these defs to be
physical registers, but for WebAssembly they must be virtual registers
like any other values. This CL changes InstrEmitter to check the new
target lowering hook to determine whether variadic defs should be
physical or virtual registers.
These changes are necessary to support a generalized CALL instruction
for WebAssembly that is capable of returning an arbitrary number of
arguments. Fully implementing that instruction will require additional
changes that are described in comments here but left for a follow up
commit.
Reviewers: aheejin, dschuff, qcolombet
Subscribers: sbc100, jgravelle-google, hiraditya, sunfish, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D71484
This was unconditionally folding this to the source operand, even if the access was out of bounds. Use undef instead of the extract is not the first element.
This helps with some cases where 3-vectors are legalized and avoids processing the 4th component.
Original Patch by: arsenm (Matt Arsenault)
Differential Revision: https://reviews.llvm.org/D51589
Add DemandedElts handling to ISD::ANY_EXTEND and add missing ISD::ANY_EXTEND_VECTOR_INREG handling. Despite the lack of test changes this code IS being used - its just that the ANY_EXTEND ops are legalized later on (typically to ZERO_EXTEND equivalents) so we typically manage to combine later on.
The algorithm here only works if the sint_to_fp doesn't do any
rounding. Otherwise it can round before the offset fixup is
applied. Add an assert to protect this.
To avoid breaking the one test in tree that tested this code
with a set of types that fail the assert, I've enabled i32->f32
to use the i64->f32 algorithm. This only occurs when f64 isn't
a legal type. If f64 is legal then we do i32->f64->f32 instead.
Differential Revision: https://reviews.llvm.org/D72794
This was dropping the invariant metadata on dead argument loads, so
they weren't deleted.
Atomics still need to be fixed the same way. Also, apparently store
was never preserving dereferencable which should also be fixed.
Testing compiler-rt, a new assertion failure occurs when building
the GwpAsanTestObjects object. I'm uploading a reproducer to D70597.
This reverts commit 75188b01e9.
If there are DBG_VALUEs between phi and label (after phi and before label),
DBG_VALUE will block PHI lowering after the LABEL. Moving all DBG_VALUEs
after Labels in the function ScheduleDAGSDNodes::EmitSchedule to avoid
impacting PHI lowering.
before:
PHI
DBG_VALUE
LABEL
after: (move DBG_VALUE after label)
PHI
LABEL
DBG_VALUE
then: (phi lowering after label)
LABEL
COPY
DBG_VALUE
Fixes the issue: https://bugs.llvm.org/show_bug.cgi?id=43859
Differential Revision: https://reviews.llvm.org/D70597
This was moved in October 2018, but we don't appear to be using
this for vectors on any in tree target.
Moving it back simplifies D72794 so we can share the code for i32->f32.
This code is untested in tree because the "APFloat::semanticsPrecision(sem) >= SrcVT.getSizeInBits() - 1" check is false for most combinations for int and fp types except maybe i32 and f64. For that you would need i32 to be an illegal type, but f64 to be legal and have custom handling for legalizing the split sint_to_fp. The precision check itself was added in 2010 to fix a double rounding issue in the algorithm that would occur if the sint_to_fp was not able to do the conversion without rounding.
Differential Revision: https://reviews.llvm.org/D72728
Code in getRoot made the assumption that every node in PendingLoads
must always itself have a dependency on the current DAG root node.
After the changes in 04a8696, it turns out that this assumption no
longer holds true, causing wrong codegen in some cases (e.g. stores
after constrained FP intrinsics might get deleted).
To fix this, we now need to make sure that the TokenFactor created
by getRoot always includes the previous root, if there is no implicit
dependency already present.
The original getControlRoot code already has exactly this check,
so this patch simply reuses that code now for getRoot as well.
This fixes the regression.
NFC if no constrained FP intrinsic is present.
As mentioned by @nikic on rGef5debac4302, we can merge the guaranteed bottom zero bits from the shifted value, and then, if a min shift amount is known, zero out the bottom bits as well.
As mentioned by @nikic on rGef5debac4302 (although that was just about SHL), we can merge the guaranteed top zero bits from the shifted value, and then, if a min shift amount is known, zero out the top bits as well.
SHL tests / handling will be added in a follow up patch.
Summary:
be15dfa88f broke GlobalISel's usage of getSetCCInverse() which currently
appears to be limited to our out-of-tree backend. GlobalISel doesn't use
EVT's and isn't able to derive them from the information it has as it
doesn't distinguish between integer and floating point types (that
distinction is made by operations rather than values). Bring back the
bool version of getSetCCInverse() in a way that doesn't break the intent
of be15dfa88f but also allows GlobalISel to continue using it.
Reviewers: spatel, bogner, arichardson
Reviewed By: arichardson
Subscribers: rovka, hiraditya, Petar.Avramovic, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D72309
Some target like arm/riscv with soft-float will have compiling crash when using -fno-unsafe-math-optimization option.
This patch will add the missing strict FP support to SoftenFloatRes_XINT_TO_FP.
Differential Revision: https://reviews.llvm.org/D72277
We need to ensure that fpexcept.strict nodes are not optimized away even if
the result is unused. To do that, we need to chain them into the block's
terminator nodes, like already done for PendingExcepts.
This patch adds two new lists of pending chains, PendingConstrainedFP and
PendingConstrainedFPStrict to hold constrained FP intrinsic nodes without
and with fpexcept.strict markers. This allows not only to solve the above
problem, but also to relax chains a bit further by no longer flushing all
FP nodes before a store or other memory access. (They are still flushed
before nodes with other side effects.)
Reviewed By: craig.topper
Differential Revision: https://reviews.llvm.org/D72341
As detailed in https://blog.regehr.org/archives/1709 we don't make use of the known leading/trailing zeros for shifted values in cases where we don't know the shift amount value.
This patch adds support to SelectionDAG::ComputeKnownBits to use KnownBits::countMinTrailingZeros and countMinLeadingZeros to set the minimum guaranteed leading/trailing known zero bits.
Differential Revision: https://reviews.llvm.org/D72573
Custom legalization can produce MERGE_VALUES to return multiple
results. We can expand them immediately instead of leaving them
around for DAG combine to clean up.
Some of the simplest handlers just call TLI and if that fails,
they fall back to unrolling. For those just inline the TLI call
and share the unrolling call with the default case of Expand.
For ExpandFSUB and ExpandBITREVERSE so that its obvious they
don't return results sometimes and want to defer to LegalizeDAG.
Summary:
This always just used the same libcall as unordered, but the comparison predicate was different. This change appears to have been made when targets were given the ability to override the predicates. Before that they were hardcoded into the type legalizer. At that time we never inverted predicates and we handled ugt/ult/uge/ule compares by emitting an unordered check ORed with a ogt/olt/oge/ole checks. So only ordered needed an inverted predicate. Later ugt/ult/uge/ule were optimized to only call a single libcall and invert the compare.
This patch removes the ordered entries and just uses the inverting logic that is now present. This removes some odd things in both the Mips and WebAssembly code.
Reviewers: efriedma, ABataev, uweigand, cameron.mcinally, kpn
Reviewed By: efriedma
Subscribers: dschuff, sdardis, sbc100, arichardson, jgravelle-google, kristof.beyls, hiraditya, aheejin, sunfish, atanasyan, Petar.Avramovic, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D72536
ONE is currently softened to OGT | OLT. But the libcalls for OGT and OLT libcalls will trigger an exception for QNAN. At least for X86 with libgcc. UEQ on the other hand uses UO | OEQ. The UO and OEQ libcalls will not trigger an exception for QNAN.
This patch changes ONE to use the inverse of the UEQ lowering. So we now produce O & UNE. Technically the existing behavior was correct for a signalling ONE, but since I don't know how to generate one of those from clang that seemed like something we can deal with later as we would need to fix other predicates as well. Also removing spurious exceptions seemed better than missing an exception.
There are also problems with quiet OGT/OLT/OLE/OGE, but those are harder to fix.
Differential Revision: https://reviews.llvm.org/D72477
This system wasn't very well designed for multi-result nodes. As
a consequence they weren't consistently registered in the
LegalizedNodes map leading to nodes being revisited for different
results.
I've removed the "Result" variable from the main LegalizeOp method
and used a SDNode* instead. The result number from the incoming
Op SDValue is only used for deciding which result to return to the
caller. When LegalizeOp is called it should always register a
legalized result for all of its results. Future calls for any other
result should be pulled for the LegalizedNodes map.
Legal nodes will now register all of their results in the map
instead of just the one we were called for.
The Expand and Promote handling to use a vector of results similar
to LegalizeDAG. Each of the new results is then re-legalized and
logged in the LegalizedNodes map for all of the Results for the
node being legalized. None of the handles register their own
results now. And none call ReplaceAllUsesOfValueWith now.
Custom handling now always passes result number 0 to LowerOperation.
This matches what LegalizeDAG does. Since the introduction of
STRICT nodes, I've encountered several issues with X86's custom
handling being called with an SDValue pointing at the chain and
our custom handlers using that to get a VT instead of result 0.
This should prevent us from having any more of those issues. On
return we will update the LegalizedNodes map for all results so
we shouldn't call the custom handler again for each result number.
I want to push SDNode* further into the Expand and Promote
handlers, but I've left that for a follow to keep this patch size
down. I've created a dummy SDValue(Node, 0) to keep the handlers
working.
Differential Revision: https://reviews.llvm.org/D72224
In D71841 we inverted the sense of the SDNode-level flag to ensure all nodes
default to potentially raising FP exceptions unless otherwise specified --
i.e. if we forget to propagate the flag somewhere, the effect is now only
lost performance, not incorrect code.
However, the related flag at the MI level still defaults to nodes not raising
FP exceptions unless otherwise specified. To be fully on the (conservatively)
safe side, we should invert that flag as well.
This patch does so by replacing MIFlag::FPExcept with MIFlag::NoFPExcept.
(Note that this does also introduce an incompatible change in the MIR format.)
Reviewed By: craig.topper
Differential Revision: https://reviews.llvm.org/D72466
Only PPC seems to be using it, and only checks some simple cases and
doesn't distinguish between FP. Just switch to using LLT to simplify
use from GlobalISel.
If we're doing a compare that only tests the sign bit and only the sign bit is demanded, we can just bypass the node. This removes one of the blend dependencies in our v2i64->v2f32 uint_to_fp codegen on pre-sse4.2 targets.
Differential Revision: https://reviews.llvm.org/D72356
If we are extracting a chunk of a vector that's a fraction of an
operand of the concatenated vector operand, we can extract directly
from one of those original operands.
This is another suggestion from PR42024:
https://bugs.llvm.org/show_bug.cgi?id=42024#c2
But I'm not sure yet if it will make any difference on those patterns.
It seems to help a few existing AVX512 tests though.
Differential Revision: https://reviews.llvm.org/D72361
This is a positive combination as long as the NEG is NOT free,
as we are reducing the number of NEG from two to one.
Differential Revision: https://reviews.llvm.org/D72312
Summary:
Added MIRFormatter for target specific MIR formating and parsing with
immediate and custom pseudo source values. Target machine can subclass
MIRFormatter and implement custom logic for printing and parsing
immediate and custom pseudo source values for better readability.
* Target specific immediate mnemonic need to start with "." follows by
identifier string. When MIR parser sees immediate it will call target
specific parsing function.
* Custom pseudo source value need to start with custom follows by
double-quoted string. MIR parser will pass the quoted string to target
specific PSV parsing function.
* MIRFormatter have 2 helper functions to facilitate LLVM value printing
and parsing for custom PSV if they refers LLVM values.
Patch by Peng Guo
Reviewers: dsanders, arsenm
Reviewed By: dsanders
Subscribers: wdng, jvesely, nhaehnle, hiraditya, jfb, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D69836
Summary:
Added MIRFormatter for target specific MIR formating and parsing with
immediate and custom pseudo source values. Target machine can subclass
MIRFormatter and implement custom logic for printing and parsing
immediate and custom pseudo source values for better readability.
* Target specific immediate mnemonic need to start with "." follows by
identifier string. When MIR parser sees immediate it will call target
specific parsing function.
* Custom pseudo source value need to start with custom follows by
double-quoted string. MIR parser will pass the quoted string to target
specific PSV parsing function.
* MIRFormatter have 2 helper functions to facilitate LLVM value printing
and parsing for custom PSV if they refers LLVM values.
Reviewers: dsanders, arsenm
Reviewed By: dsanders
Subscribers: wdng, jvesely, nhaehnle, hiraditya, jfb, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D69836
Summary:
This patch adds intrinsics and ISelDAG nodes for
signed and unsigned fixed-point division:
llvm.sdiv.fix.*
llvm.udiv.fix.*
These intrinsics perform scaled division on two
integers or vectors of integers. They are required
for the implementation of the Embedded-C fixed-point
arithmetic in Clang.
Patch by: ebevhan
Reviewers: bjope, leonardchan, efriedma, craig.topper
Reviewed By: craig.topper
Subscribers: Ka-Ka, ilya, hiraditya, jdoerfert, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D70007
Summary:
Remove the restrictions that preventing "asm goto" from returning non-void
values. The values returned by "asm goto" are only valid on the "fallthrough"
path.
Reviewers: jyknight, nickdesaulniers, hfinkel
Reviewed By: jyknight, nickdesaulniers
Subscribers: rsmith, hiraditya, llvm-commits, cfe-commits, craig.topper, rnk
Tags: #clang, #llvm
Differential Revision: https://reviews.llvm.org/D69876
This is possibly a small part towards solving PR42024:
https://bugs.llvm.org/show_bug.cgi?id=42024
The vectorizer is creating shuffles of concat like this:
%63 = shufflevector <4 x i64> %x, <4 x i64> undef, <8 x i32> <i32 0, i32 1, i32 2, i32 3, i32 0, i32 1, i32 2, i32 3>
%64 = shufflevector <8 x i64> %63, <8 x i64> undef, <8 x i32> <i32 0, i32 4, i32 1, i32 5, i32 2, i32 6, i32 3, i32 7>
That might be fixable in the vectorizers, but we're not allowed to fold that into a single shuffle in instcombine,
so we should have a backend backstop to convert that into the likely simpler form:
%64 = shufflevector <4 x i64> %x, <4 x i64> undef, <8 x i32> <i32 0, i32 0, i32 1, i32 1, i32 2, i32 2, i32 3, i32 3>
Differential Revision: https://reviews.llvm.org/D72300
This patch adds widening which really just scalarizes because we don't have a strategy for the extra elements we would need to pad with.
Differential Revision: https://reviews.llvm.org/D72193
This isn't a functonal change since we also check the bit width is the
same and the input type is integer. This guarantees the input and
output type are the same. But passing the input type makes the code
more readable.
This is the DAG node for SIGN_EXTEND_INREG :
t21: v4i32 = sign_extend_inreg t18, ValueType:ch:v4i16
It has two operands. The first one is the value it want to extend, and the second
one is the type to specify how to extend the value. For this example, it means
that, it is signed extend the t18(v4i32) from v4i16 to v4i32. That is
the semantics of c code:
vector int foo(vector int m) {
return m << 16 >> 16;
}
And it could be any vector type that hardware support the operation, though
the type 'v4i16' is NOT legal for the target. When we are trying to combine
the srl + sra, what we did now is calling the TLI.isOperationLegal(), which
will also check the legality of the type. That doesn't make sense.
Differential Revision: https://reviews.llvm.org/D70230
The code here isn't great in all caess. Particularly v4f64->v4i32
on 64-bit AVX targets. But there is some improvement in some
configurations.
There's definitely some issues with computeNumSignBits with
X86ISD::STRICT_FCMP. As well as not being able to propagate sign
bits through merge_values nodes that get created during custom
legalization.
Previously, for vectors we created a vselect with a condition that
didn't match what the target wanted according to getSetCCResultType.
To make up for this, X86 had a special DAG combine to detect if
the condition was all sign bits and then insert its own truncate
or extend. By adding the extend/truncate here explicitly we can
avoid that.
ExpandStrictFPOp calls ExpandUINT_TO_FLOAT. Previously, ExpandUINT_TO_FLOAT
returned SDValue() if it wasn't able to handle and needed to unroll.
Then ExpandStrictFPOp would detect his SDValue() and do the unroll.
After this change, ExpandUINT_TO_FLOAT will directly call
UnrollStrictFPOp and return the unrolled result.
This patch attempts to peek through vectors based on the demanded bits/elt of a particular ISD::EXTRACT_VECTOR_ELT node, allowing us to avoid dependencies on ops that have no impact on the extract.
In particular this helps remove some unnecessary scalar->vector->scalar patterns.
The wasm shift patterns are annoying - @tlively has indicated that the wasm vector shift codegen are to be refactored in the near-term and isn't considered a major issue.
Reapplied after reversion at rL368660 due to PR42982 which was fixed at rGca7fdd41bda0.
Differential Revision: https://reviews.llvm.org/D65887
UpdateNodeOperands might CSE to another existing node. So we should make sure we're legalizing that node otherwise we might fail to hook up the operands properly. I've moved the result registration up to the caller to avoid having to pass both Result and Op into the functions where it might be confusing which is which.
This address 2 other issues pointed out in D71861.
Differential Revision: https://reviews.llvm.org/D72021
When the "disable-tail-calls" attribute was added, checks were added for
it in various backends. Now this code has proliferated, and it is
something the target is responsible for checking. Move that
responsibility back to the ISels (fast, global, and SD).
There's no major functionality change, except for targets that never
implemented this check.
This LLVM attribute was originally added in
d9699bc7bd (2015).
Reviewers: echristo, MaskRay
Differential Revision: https://reviews.llvm.org/D72118
The fold 'A - (A & (B - 1))' -> 'A & (0 - B)'
added in 8dab0a4a7d
is too specific. It should/can just be 'A - (A & B)' -> 'A & (~B)'
Even if we don't manage to fold `~` into B,
we have likely formed `ANDN` node.
Also, this way there's less similar-but-duplicate folds.
Name: X - (X & Y) -> X & (~Y)
%o = and i32 %X, %Y
%r = sub i32 %X, %o
=>
%n = xor i32 %Y, -1
%r = and i32 %X, %n
https://rise4fun.com/Alive/kOUl
See
https://bugs.llvm.org/show_bug.cgi?id=44448https://reviews.llvm.org/D71499
The fold 'A - (A & (B - 1))' -> 'A & (0 - B)'
added in 8dab0a4a7d
is too specific. It should just be 'A - (A & B)' -> 'A & (~B)',
but we currently fail to sink that '~' into `(B - 1)`.
Name: ~(X - 1) -> (0 - X)
%o = add i32 %X, -1
%r = xor i32 %o, -1
=>
%r = sub i32 0, %X
https://rise4fun.com/Alive/rjU
While we do manage to fold integer-typed IR in middle-end,
we can't do that for the main motivational case of pointers.
There is @llvm.ptrmask() intrinsic which may or may not be helpful,
but i'm not sure it is fully considered canonical yet,
not everything is fully aware of it likely.
Name: PR44448 ptr - (ptr & C) -> ptr & (~C)
%bias = and i32 %ptr, C
%r = sub i32 %ptr, %bias
=>
%r = and i32 %ptr, ~C
See
https://bugs.llvm.org/show_bug.cgi?id=44448https://reviews.llvm.org/D71499
While we do manage to fold integer-typed IR in middle-end,
we can't do that for the main motivational case of pointers.
There is @llvm.ptrmask() intrinsic which may or may not be helpful,
but i'm not sure it is fully considered canonical yet,
not everything is fully aware of it likely.
https://rise4fun.com/Alive/ZVdp
Name: ptr - (ptr & (alignment-1)) -> ptr & (0 - alignment)
%mask = add i64 %alignment, -1
%bias = and i64 %ptr, %mask
%r = sub i64 %ptr, %bias
=>
%highbitmask = sub i64 0, %alignment
%r = and i64 %ptr, %highbitmask
See
https://bugs.llvm.org/show_bug.cgi?id=44448https://reviews.llvm.org/D71499
The NoFPExcept bit in SDNodeFlags currently defaults to true, unlike all
other such flags. This is a problem, because it implies that all code that
transforms SDNodes without copying flags can introduce a correctness bug,
not just a missed optimization.
This patch changes the default to false. This makes it necessary to move
setting the (No)FPExcept flag for constrained intrinsics from the
visitConstrainedIntrinsic routine to the generic visit routine at the
place where the other flags are set, or else the intersectFlagsWith
call would erase the NoFPExcept flag again.
In order to avoid making non-strict FP code worse, whenever
SelectionDAGISel::SelectCodeCommon matches on a set of orignal nodes
none of which can raise FP exceptions, it will preserve this property
on all results nodes generated, by setting the NoFPExcept flag on
those result nodes that would otherwise be considered as raising
an FP exception.
To check whether or not an SD node should be considered as raising
an FP exception, the following logic applies:
- For machine nodes, check the mayRaiseFPException property of
the underlying MI instruction
- For regular nodes, check isStrictFPOpcode
- For target nodes, check a newly introduced isTargetStrictFPOpcode
The latter is implemented by reserving a range of target opcodes,
similarly to how memory opcodes are identified. (Note that there a
bit of a quirk in identifying target nodes that are both memory nodes
and strict FP nodes. To simplify the logic, right now all target memory
nodes are automatically also considered strict FP nodes -- this could
be fixed by adding one more range.)
Reviewed By: craig.topper
Differential Revision: https://reviews.llvm.org/D71841
This was increasing the number of instructions when fsub was legalized
on AMDGPU with no signed zeros enabled. This fold should be guarded by
hasOneUse, and I don't think getNode should be doing that. The same
fold is already done as a regular combine through isNegatibleForFree.
This does require duplicating, even though isNegatibleForFree does
this combine already (and properly checks hasOneUse) to avoid one PPC
regression. In the regression, the outer fneg has nsz but the fsub
operand does not. isNegatibleForFree only sees the operand, and
doesn't see it's used from a nsz context. A nsz parameter needs to be
added and threaded through isNegatibleForFree to avoid this.
These operations are needed as building blocks for promoting so they
can't be promoted themselves.
This appeared to work because the fp_extend query type for operation
actions is the result type, not the input type so it never triggered
in the legalizer.
For fp_round, the vector op legalizer just ended up creating a
nop fp_extend that was elided by getNode, followed by a nop
fp_round that was also elided by getNode. This was followed by
a final fp_round from v4f32 back to vf416 which was CSEd to the
original node. Then legalize vector ops just believed that node
legalized to itself. LegalizeDAG took another crack at promoting
it, but didn't have a handler so just skipped it with a debug
message saying it wasn't promoted.
This patch just removes the operation actions to avoid this
non-sense. Found while trying to refactor LegalizeVectorOps to
handle multiple result nodes better.
This allows us to clean up some places that were peeking through
the MERGE_VALUES node after the call. By returning the SDValues
directly, we can clean that up.
Unfortunately, there are several call sites in AMDGPU that wanted
the MERGE_VALUES and now need to create their own.
This allows us to delete InlineAsm::Constraint_i workarounds in
SelectionDAGISel::SelectInlineAsmMemoryOperand overrides and
TargetLowering::getInlineAsmMemConstraint overrides.
They were introduced to X86 in r237517 to prevent crashes for
constraints like "=*imr". They were later copied to other targets.
SelectionDAG::transferDbgValues() can 'reattach' SDDbgValue from one to
another node, but doesn't change its source order. If the destination node has
the order greater than the SDDbgValue, there are two possible issues
revealed later:
* If debug info is attached to an instruction that is the first definition
of a register, this ends up with a def-after-use and the debug info
gets 'undef' later.
* If MIR has another definition of a register above the debug info,
the debug info may represent a source variable incorrectly because
it appears (significantly) before an instruction corresponded
to this debug info.
So, the patch changes the order of an SDDbgValue when it is moved
to a node with greater order.
Reviewers: dblaikie, jmorse, aprantl
Reviewed By: aprantl
Subscribers: aprantl, hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D71175
Fix several several additional problems with the int <-> FP conversion
logic both in common code and in the X86 target. In particular:
- The STRICT_FP_TO_UINT expansion emits a floating-point compare. This
compare can raise exceptions and therefore needs to be a strict compare.
I've made it signaling (even though quiet would also be correct) as
signaling is the more usual default for an LT. This code exists both
in common code and in the X86 target.
- The STRICT_UINT_TO_FP expansion algorithm was incorrect for strict mode:
it emitted two STRICT_SINT_TO_FP nodes and then used a select to choose one
of the results. This can cause spurious exceptions by the STRICT_SINT_TO_FP
that ends up not chosen. I've fixed the algorithm to use only a single
STRICT_SINT_TO_FP instead.
- The !isStrictFPEnabled logic in DoInstructionSelection would sometimes do
the wrong thing because it calls getOperationAction using the result VT.
But for some opcodes, incuding [SU]INT_TO_FP, getOperationAction needs to
be called using the operand VT.
- Remove some (obsolete) code in X86DAGToDAGISel::Select that would mutate
STRICT_FP_TO_[SU]INT to non-strict versions unnecessarily.
Reviewed by: craig.topper
Differential Revision: https://reviews.llvm.org/D71840
This moves the X86 specific transform from rL364407
into DAGCombiner to generically handle 'little to big' cases
(for example: extract_subvector(v2i64 bitcast(v16i8))). This
allows us to remove both the x86 implementation and the aarch64
bitcast(extract_subvector(bitcast())) combine.
Earlier patches that dealt with regressions initially exposed
by this patch:
rG5e5e99c041e4
rG0b38af89e2c0
Patch by: @RKSimon (Simon Pilgrim)
Differential Revision: https://reviews.llvm.org/D63815
Summary:
Without this check unnecessary FMA instructions are generated when the FSUB terms are reused.
This also has the side-effect that the same value is computed to different levels of precision, which can create undesirable effects if the results are used together in subsequent computation.
Reviewers: arsenm, nhaehnle, foad, tpr, dstuttard, spatel
Reviewed By: arsenm
Subscribers: jvesely, wdng, hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D71656
Summary:
We noticed in Julia that the sequence below no longer turned into
a sequence of FMA instructions in LLVM 7+, but it did in LLVM 6.
```
%29 = fmul contract <4 x double> %wide.load, %wide.load16
%30 = fmul contract <4 x double> %wide.load13, %wide.load17
%31 = fmul contract <4 x double> %wide.load14, %wide.load18
%32 = fmul contract <4 x double> %wide.load15, %wide.load19
%33 = fadd fast <4 x double> %vec.phi, %29
%34 = fadd fast <4 x double> %vec.phi10, %30
%35 = fadd fast <4 x double> %vec.phi11, %31
%36 = fadd fast <4 x double> %vec.phi12, %32
```
Unlike Clang, Julia doesn't set the `unsafe-fp-math=true` function
attribute, but rather emits more local instruction flags.
This partially undoes https://reviews.llvm.org/D46854 and if required I can try to minimize the test further.
Reviewers: spatel, mcberg2017
Reviewed By: spatel
Subscribers: chriselrod, merge_guards_bot, hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D71495
Add new intrinsics
llvm.experimental.constrained.minimum
llvm.experimental.constrained.maximum
as strict versions of llvm.minimum and llvm.maximum.
Includes SystemZ back-end support.
Reviewed By: craig.topper
Differential Revision: https://reviews.llvm.org/D71624
getTargetConstant prevents any optimizations from operating on the
value and basically says its already been iseled. But since we
want the index to be in a register, this isn't true.
Prior to this we were generating a vbroadcast with an immediate
argument which is illegal and was flagged by the expensive checks
bot.
This reverts commit 1f3dd83cc1, reapplying
commit bb1b0bc4e5.
The original commit failed on some builds seemingly due to the use of a
bracketed constructor with an std::array, i.e. `std::array<> arr({...})`.
Previously, LLVM had no functional way of performing casts inside of a
DIExpression(), which made salvaging cast instructions other than Noop
casts impossible. This patch enables the salvaging of casts by using the
DW_OP_LLVM_convert operator for SExt and Trunc instructions.
There is another issue which is exposed by this fix, in which fragment
DIExpressions (which are preserved more readily by this patch) for
values that must be split across registers in ISel trigger an assertion,
as the 'split' fragments extend beyond the bounds of the fragment
DIExpression causing an error. This patch also fixes this issue by
checking the fragment status of DIExpressions which are to be split, and
dropping fragments that are invalid.
Summary: Add calculation for elements in structures in getting uniform
base for the Gather/Scatter intrinsic.
Reviewers: craig.topper, c-rhodes, RKSimon
Subscribers: hiraditya, llvm-commits, annita.zhang, LuoYuanke
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D71442
The caller will assert for nodes with more than 2 results unless
we return a null SDValue.
I tried to test this by copying an AArch64 test for ScalarizeVecOp_FP_ROUND.
While it did hit the assert and this commited fixed that. It also
hit a later problem that couldn't be fixed without adding strict
FP support to AArch64.
This started with adding a test to support get code coverage on
ScalarizeVecOp_UnaryOp_StrictFP by copying an existing AArch64 test
and using constrained sitofp/uitofp intrinsics.
This found 3 separate issues:
-ScalarizeVecOp_UnaryOp_StrictFP needs to do its own replacement
because the caller can't handle replacing multiple results.
-Missing integer promotion support for sitofp/uitofp
-Chain result not always assigned in ExpandLegalINT_TO_FP.
Committing them together so I can add the test case.
This is an alternate fix for the bug discussed in D70595.
This also includes minimal tests for other in-tree targets to show the problem more
generally.
We check the number of uses as a predicate for whether some value is free to negate,
but that use count can change as we rewrite the expression in getNegatedExpression().
So something that was marked free to negate during the cost evaluation phase becomes
not free to negate during the rewrite phase (or the inverse - something that was not
free becomes free). This can lead to a crash/assert because we expect that everything
in an expression that is negatible to be handled in the corresponding code within
getNegatedExpression().
This patch adds a hack to work-around the case where we probably no longer detect
that either multiply operand of an FMA isNegatibleForFree which is assumed to be
true when we started rewriting the expression.
Differential Revision: https://reviews.llvm.org/D70975
This is an alternate fix for the bug discussed in D70595.
This also includes minimal tests for other in-tree targets to show the problem more
generally.
We check the number of uses as a predicate for whether some value is free to negate,
but that use count can change as we rewrite the expression in getNegatedExpression().
So something that was marked free to negate during the cost evaluation phase becomes
not free to negate during the rewrite phase (or the inverse - something that was not
free becomes free). This can lead to a crash/assert because we expect that everything
in an expression that is negatible to be handled in the corresponding code within
getNegatedExpression().
This patch adds a hack to work-around the case where we probably no longer detect
that either multiply operand of an FMA isNegatibleForFree which is assumed to be
true when we started rewriting the expression.
Differential Revision: https://reviews.llvm.org/D70975
Summary:
Right now, DAGCombiner process the nodes in an iplementation defined order. This tends to be fragile as optimisation may or may not kick in depending on the traversal order.
This is part of a larger effort to get the DAGCombiner to process its node in topological order.
Reviewers: craig.topper, efriedma, RKSimon, lebedev.ri
Subscribers: hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D70921
of integers to floating point.
This includes some of Craig Topper's changes for promotion support from
D71130.
Differential Revision: https://reviews.llvm.org/D69275
It doesn't seem to do anything that SplitVecRes_StrictFPOp can't
do. SplitVecRes_StrictFPOp already handles nodes with a variable
number of arguments and a mix of scalar and vector arguments.
Summary:
To find potential opportunities to use getMemBasePlusOffset() I looked at
all ISD::ADD uses found with the regex getNode\(ISD::ADD,.+,.+Ptr
in lib/CodeGen/SelectionDAG. If this patch is accepted I will convert
the files in the individual backends too.
The motivation for this change is our out-of-tree CHERI backend
(https://github.com/CTSRD-CHERI/llvm-project). We use a separate register
type to store pointers (128-bit capabilities, which are effectively
unforgeable and monotonic fat pointers). These capabilities permit a
reduced set of operations and therefore use a separate ValueType (iFATPTR).
to represent pointers implemented as capabilities.
Therefore, we need to avoid using ISD::ADD for our patterns that operate
on pointers and need to use a function that chooses ISD::ADD or a new
ISD::PTRADD opcode depending on the value type.
We originally added a new DAG.getPointerAdd() function, but after this
patch series we can modify the implementation of getMemBasePlusOffset()
instead. Avoiding direct uses of ISD::ADD for pointer types will
significantly reduce the amount of assertion/instruction selection
failures for us in future upstream merges.
Reviewers: spatel
Reviewed By: spatel
Subscribers: merge_guards_bot, hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D71207
Summary:
This change is preparatory work to use this helper functions in more places.
In order to make this change, getMemBasePlusOffset() has been extended to
also take a SDNodeFlags parameter.
The motivation for this change is our out-of-tree CHERI backend
(https://github.com/CTSRD-CHERI/llvm-project). We use a separate register
type to store pointers (128-bit capabilities, which are effectively
unforgeable and monotonic fat pointers). These capabilities permit a
reduced set of operations and therefore use a separate ValueType (iFATPTR).
to represent pointers implemented as capabilities.
Therefore, we need to avoid using ISD::ADD for our patterns that operate
on pointers and need to use a function that chooses ISD::ADD or a new
ISD::PTRADD opcode depending on the value type.
We originally added a new DAG.getPointerAdd() function, but after this
patch series we can modify the implementation of getMemBasePlusOffset()
instead. Avoiding direct uses of ISD::ADD for pointer types will
significantly reduce the amount of assertion/instruction selection
failures for us in future upstream merges.
Reviewers: spatel
Reviewed By: spatel
Subscribers: merge_guards_bot, hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D71206
Summary:
This change is preparatory work to use this helper functions in more places.
Currently the function only allows integer constants offsets, but there
are cases where we can use an existing SDValue parameter.
The motivation for this change is our out-of-tree CHERI backend
(https://github.com/CTSRD-CHERI/llvm-project). We use a separate register
type to store pointers (128-bit capabilities, which are effectively
unforgeable and monotonic fat pointers). These capabilities permit a
reduced set of operations and therefore use a separate ValueType (iFATPTR).
to represent pointers implemented as capabilities.
Therefore, we need to avoid using ISD::ADD for our patterns that operate
on pointers and need to use a function that chooses ISD::ADD or a new
ISD::PTRADD opcode depending on the value type.
We originally added a new DAG.getPointerAdd() function, but after this
patch series we can modify the implementation of getMemBasePlusOffset()
instead. Avoiding direct uses of ISD::ADD for pointer types will
significantly reduce the amount of assertion/instruction selection
failures for us in future upstream merges.
Reviewers: spatel, craig.topper
Reviewed By: spatel, craig.topper
Subscribers: craig.topper, merge_guards_bot, hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D71205
Summary:
This change is preparatory work to use this helper functions in more places.
Currently the function only allows positive offsets, but there are cases
where we want to subtract an offset from an existing pointer.
The motivation for this change is our out-of-tree CHERI backend
(https://github.com/CTSRD-CHERI/llvm-project). We use a separate register
type to store pointers (128-bit capabilities, which are effectively
unforgeable and monotonic fat pointers). These capabilities permit a
reduced set of operations and therefore use a separate ValueType (iFATPTR).
to represent pointers implemented as capabilities.
Therefore, we need to avoid using ISD::ADD for our patterns that operate
on pointers and need to use a function that chooses ISD::ADD or a new
ISD::PTRADD opcode depending on the value type.
We originally added a new DAG.getPointerAdd() function, but after this
patch series we can modify the implementation of getMemBasePlusOffset()
instead. Avoiding direct uses of ISD::ADD for pointer types will
significantly reduce the amount of assertion/instruction selection
failures for us in future upstream merges.
Reviewers: spatel
Reviewed By: spatel
Subscribers: merge_guards_bot, hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D71204
The initial attempt (rG89633320) botched the logic by reversing
the source/dest types. Added x86 tests for additional coverage.
The vector tests show a potential improvement (fold vector load
instead of broadcasting), but that's a known/existing problem.
This fold is done in IR by instcombine, and we have a special
form of it already here in DAGCombiner, but we want the more
general transform too:
https://rise4fun.com/Alive/3jZm
Name: general
Pre: (C1 + zext(C2) < 64)
%s = lshr i64 %x, C1
%t = trunc i64 %s to i16
%r = lshr i16 %t, C2
=>
%s2 = lshr i64 %x, C1 + zext(C2)
%a = and i64 %s2, zext((1 << (16 - C2)) - 1)
%r = trunc %a to i16
Name: special
Pre: C1 == 48
%s = lshr i64 %x, C1
%t = trunc i64 %s to i16
%r = lshr i16 %t, C2
=>
%s2 = lshr i64 %x, C1 + zext(C2)
%r = trunc %s2 to i16
...because D58017 exposes a regression without this fold.
GEP index size can be specified in the DataLayout, introduced in D42123. However, there were still places
in which getIndexSizeInBits was used interchangeably with getPointerSizeInBits. This notably caused issues
with Instcombine's visitPtrToInt; but the unit tests was incorrect, so this remained undiscovered.
This fixes the buildbot failures.
Differential Revision: https://reviews.llvm.org/D68328
Patch by Joseph Faulls!
Summary:
The use of a boolean isInteger flag (generally initialized using
VT.isInteger()) caused errors in our out-of-tree CHERI backend
(https://github.com/CTSRD-CHERI/llvm-project).
In our backend, pointers use a separate ValueType (iFATPTR) and therefore
.isInteger() returns false. This meant that getSetCCInverse() was using the
floating-point variant and generated incorrect code for us:
`(void *)0x12033091e < (void *)0xffffffffffffffff` would return false.
Committing this change will significantly reduce our merge conflicts
for each upstream merge.
Reviewers: spatel, bogner
Reviewed By: bogner
Subscribers: wuzish, arsenm, sdardis, nemanjai, jvesely, nhaehnle, hiraditya, kbarton, jrtc27, atanasyan, jsji, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D70917
Updated pred_load patterns added to AArch64SVEInstrInfo.td by this patch
to use reg + imm non-temporal loads to fix previous test failures.
Original commit message:
Adds the following intrinsics:
- llvm.aarch64.sve.ldnt1
- llvm.aarch64.sve.stnt1
This patch creates masked loads and stores with the
MONonTemporal flag set when used with the intrinsics above.
I believe this is a leftover from when fp128 was softened to fp128
on X86-64. In that case type legalization must have been able to
create a load that was the same as N which would make this
replacement fail or assert. Since we no longer do that, this
check should be unneeded.
This fold is done in IR by instcombine, and we have a special
form of it already here in DAGCombiner, but we want the more
general transform too:
https://rise4fun.com/Alive/3jZm
Name: general
Pre: (C1 + zext(C2) < 64)
%s = lshr i64 %x, C1
%t = trunc i64 %s to i16
%r = lshr i16 %t, C2
=>
%s2 = lshr i64 %x, C1 + zext(C2)
%a = and i64 %s2, zext((1 << (16 - C2)) - 1)
%r = trunc %a to i16
Name: special
Pre: C1 == 48
%s = lshr i64 %x, C1
%t = trunc i64 %s to i16
%r = lshr i16 %t, C2
=>
%s2 = lshr i64 %x, C1 + zext(C2)
%r = trunc %s2 to i16
...because D58017 exposes a regression without this fold.
This is not quite NFC because I changed the SDLoc to use the more
standard 'N' (the starting node for the fold).
This transform is a special-case of a more general fold that we
do in IR, but it seems like the general fold is needed here too
to avoid a potential regression seen in D58017.
https://rise4fun.com/Alive/3jZm
During SelectionDAG, if a value which is associated with a DBG_VALUE
needs to be split across multiple registers, the DBG_VALUE will be split
into a set of fragment expressions to recreate the original value.
If one or more of these fragments cannot be created, they would
previously be silently dropped, causing the old debug value to live past
its expiry date. This patch fixes this issue by keeping invalid
fragments while setting their value as Undef.
Differential revision: https://reviews.llvm.org/D70248
GEP index size can be specified in the DataLayout, introduced in D42123. However, there were still places
in which getIndexSizeInBits was used interchangeably with getPointerSizeInBits. This notably caused issues
with Instcombine's visitPtrToInt; but the unit tests was incorrect, so this remained undiscovered.
Differential Revision: https://reviews.llvm.org/D68328
Patch by Joseph Faulls!
This has two main effects:
- Optimizes debug info size by saving 221.86 MB of obj file size in a
Windows optimized+debug build of 'all'. This is 3.03% of 7,332.7MB of
object file size.
- Incremental step towards decoupling target intrinsics.
The enums are still compact, so adding and removing a single
target-specific intrinsic will trigger a rebuild of all of LLVM.
Assigning distinct target id spaces is potential future work.
Part of PR34259
Reviewers: efriedma, echristo, MaskRay
Reviewed By: echristo, MaskRay
Differential Revision: https://reviews.llvm.org/D71320
The fp16 to larger than fp32 inserts an extend that need to
re-legalized if fp16 is promoted. But if we check for fp16
promotion first, then we can avoid emiting the fp_extend all
together.
This is an alternate fix for the bug discussed in D70595.
This also includes minimal tests for other in-tree targets
to show the problem more generally.
We check the number of uses as a predicate for whether some
value is free to negate, but that use count can change as we
rewrite the expression in getNegatedExpression(). So something
that was marked free to negate during the cost evaluation
phase becomes not free to negate during the rewrite phase (or
the inverse - something that was not free becomes free).
This can lead to a crash/assert because we expect that
everything in an expression that is negatible to be handled
in the corresponding code within getNegatedExpression().
This patch skips the use check during the rewrite phase.
So we determine that some expression isNegatibleForFree
(identically to without this patch), but during the rewrite,
don't rely on use counts to decide how to create the optimal
expression.
Differential Revision: https://reviews.llvm.org/D70975
Summary:
Adds the following intrinsics:
- llvm.aarch64.sve.ldnt1
- llvm.aarch64.sve.stnt1
This patch creates masked loads and stores with the
MONonTemporal flag set when used with the intrinsics above.
Reviewers: sdesmalen, paulwalker-arm, dancgr, mgudim, efriedma, rengolin
Reviewed By: efriedma
Subscribers: tschuett, kristof.beyls, hiraditya, rkruppe, psnobl, cfe-commits, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D71000
I think this is no longer needed. The system should take care
of legalizing any new nodes that are added. I think this might
have been needed prior to r371709 or r307053.
Summary: This is a follow up of D69281, it enables the X86 backend support for the FP comparision.
Reviewers: uweigand, kpn, craig.topper, RKSimon, cameron.mcinally, andrew.w.kaylor
Subscribers: hiraditya, llvm-commits, annita.zhang, LuoYuanke, LiuChen3
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D70582
Summary:
This fixes PR44135.
The special case when we promote a bitcast from a vector to an int
needs special handling when we are on a big-endian target.
Prior to this fix, for the added vec_to_int we see the following in the
SelectionDAG printouts
Type-legalized selection DAG: %bb.1 'foo:bb.1'
SelectionDAG has 9 nodes:
t0: ch = EntryToken
t2: v8i16,ch = CopyFromReg t0, Register:v8i16 %0
t17: v4i32 = bitcast t2
t23: i32 = extract_vector_elt t17, Constant:i32<3>
t8: ch,glue = CopyToReg t0, Register:i32 $r0, t23
t9: ch = ARMISD::RET_FLAG t8, Register:i32 $r0, t8:1
and I think here the extract_vector_elt is wrong and extracts the value
from the wrong index.
The program program should return the 32 bits made up of the elements at
index 4 and 5 in the vec6 array, but with
t23: i32 = extract_vector_elt t17, Constant:i32<3>
as far as I can tell, we will extract values that originally didn't even
exist in the vec6 vectore.
If we would instead extract the element at index 2 we would get the wanted
values.
With this fix we insert a right shift after the bitcast in
DAGTypeLegalizer::PromoteIntRes_BITCAST which then gives us
Type-legalized selection DAG: %bb.1 'vec_to_int:bb.1'
SelectionDAG has 9 nodes:
t0: ch = EntryToken
t2: v8i16,ch = CopyFromReg t0, Register:v8i16 %0
t23: v4i32 = bitcast t2
t27: i32 = extract_vector_elt t23, Constant:i32<2>
t8: ch,glue = CopyToReg t0, Register:i32 $r0, t27
t9: ch = ARMISD::RET_FLAG t8, Register:i32 $r0, t8:1
So now we get
t27: i32 = extract_vector_elt t23, Constant:i32<2>
which is what we want.
Similarly, the new int_to_vec testcase exposes a bug where we cast the other
direction. Then we instead need to add a left shift before the bitcast on
big-endian targets for the bits in the input integer to end up at the exptected
place in the vector.
Reviewers: bogner, spatel, craig.topper, t.p.northover, dmgreen, efriedma, SjoerdMeijer, samparker
Reviewed By: efriedma
Subscribers: eli.friedman, bjope, kristof.beyls, hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D70942
Summary:
Split off of D67120.
Add the profile guided size optimization instrumentation / queries in the code
gen or target passes. This doesn't enable the size optimizations in those passes
yet as they are currently disabled in shouldOptimizeForSize (for non-IR pass
queries).
A second try after reverted D71072.
Reviewers: davidxl
Subscribers: hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D71149
This adds support for constrained floating-point comparison intrinsics.
Specifically, we add:
declare <ty2>
@llvm.experimental.constrained.fcmp(<type> <op1>, <type> <op2>,
metadata <condition code>,
metadata <exception behavior>)
declare <ty2>
@llvm.experimental.constrained.fcmps(<type> <op1>, <type> <op2>,
metadata <condition code>,
metadata <exception behavior>)
The first variant implements an IEEE "quiet" comparison (i.e. we only
get an invalid FP exception if either argument is a SNaN), while the
second variant implements an IEEE "signaling" comparison (i.e. we get
an invalid FP exception if either argument is any NaN).
The condition code is implemented as a metadata string. The same set
of predicates as for the fcmp instruction is supported (except for the
"true" and "false" predicates).
These new intrinsics are mapped by SelectionDAG codegen onto two new
ISD opcodes, ISD::STRICT_FSETCC and ISD::STRICT_FSETCCS, again
representing quiet vs. signaling comparison operations. Otherwise
those nodes look like SETCC nodes, with an additional chain argument
and result as usual for strict FP nodes. The patch includes support
for the common legalization operations for those nodes.
The patch also includes full SystemZ back-end support for the new
ISD nodes, mapping them to all available SystemZ instruction to
fully implement strict semantics (scalar and vector).
Differential Revision: https://reviews.llvm.org/D69281
D53794 introduced code to perform the FP_TO_UINT expansion via FP_TO_SINT in a way that would never expose floating-point exceptions in the intermediate steps. Unfortunately, I just noticed there is still a way this can happen. As discussed in D53794, the compiler now generates this sequence:
// Sel = Src < 0x8000000000000000
// Val = select Sel, Src, Src - 0x8000000000000000
// Ofs = select Sel, 0, 0x8000000000000000
// Result = fp_to_sint(Val) ^ Ofs
The problem is with the Src - 0x8000000000000000 expression. As I mentioned in the original review, that expression can never overflow or underflow if the original value is in range for FP_TO_UINT. But I missed that we can get an Inexact exception in the case where Src is a very small positive value. (In this case the result of the sub is ignored, but that doesn't help.)
Instead, I'd suggest to use the following sequence:
// Sel = Src < 0x8000000000000000
// FltOfs = select Sel, 0, 0x8000000000000000
// IntOfs = select Sel, 0, 0x8000000000000000
// Result = fp_to_sint(Val - FltOfs) ^ IntOfs
In the case where the value is already in range of FP_TO_SINT, we now simply compute Val - 0, which now definitely cannot trap (unless Val is a NaN in which case we'd want to trap anyway).
In the case where the value is not in range of FP_TO_SINT, but still in range of FP_TO_UINT, the sub can never be inexact, as Val is between 2^(n-1) and (2^n)-1, i.e. always has the 2^(n-1) bit set, and the sub is always simply clearing that bit.
There is a slight complication in the case where Val is a constant, so we know at compile time whether Sel is true or false. In that scenario, the old code would automatically optimize the sub away, while this no longer happens with the new code. Instead, I've added extra code to check for this case and then just fall back to FP_TO_SINT directly. (This seems to catch even slightly more cases.)
Original version of the patch by Ulrich Weigand. X86 changes added by Craig Topper
Differential Revision: https://reviews.llvm.org/D67105
Summary:
Split off of D67120.
Add the profile guided size optimization instrumentation / queries in the code
gen or target passes. This doesn't enable the size optimizations in those passes
yet as they are currently disabled in shouldOptimizeForSize (for non-IR pass
queries).
Reviewers: davidxl
Subscribers: hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D71072
This patch implements the following changes:
1) SelectionDAGBuilder::visitConstrainedFPIntrinsic currently treats
each constrained intrinsic like a global barrier (e.g. a function call)
and fully serializes all pending chains. This is actually not required;
it is allowed for constrained intrinsics to be reordered w.r.t one
another or (nonvolatile) memory accesses. The MI-level scheduler already
allows for that flexibility, so it makes sense to allow it at the DAG
level as well.
This patch therefore changes the way chains for constrained intrisincs
are created, and handles them basically like load operations are handled.
This has the effect that constrained intrinsics are no longer serialized
against one another or (nonvolatile) loads. They are still serialized
against stores, but that seems hard to change with the current DAG chain
setup, and it also doesn't seem to be a big problem preventing DAG
2) The OPC_CheckFoldableChainNode check requires that each of the
intermediate nodes in a multi-node pattern match only has a single use.
This check tends to fail if those intermediate nodes are strict operations
as those have a chain output that typically indeed has another use.
However, we don't really need to consider chains here at all, since they
will all be rewritten anyway by UpdateChains later. Other parts of the
matcher therefore already ignore chains, but this hasOneUse check doesn't.
This patch replaces hasOneUse by a custom test that verifies there is no
more than one use of any non-chain output value.
In theory, this change could affect code unrelated to strict FP nodes,
but at least on SystemZ I could not find any single instance of that
happening
3) The SystemZ back-end currently does not allow matching multiply-and-
extend operations (32x32 -> 64bit or 64x64 -> 128bit FP multiply) for
strict FP operations. This was not possible in the past due to the
problems described under 1) and 2) above.
With those issues fixed, it is now possible to fully support those
instructions in strict mode as well, and this patch does so.
Differential Revision: https://reviews.llvm.org/D70913
Summary:
This follows a previous patch that changes the X86 datalayout to represent
mixed size pointers (32-bit sext, 32-bit zext, and 64-bit) with address spaces
(https://reviews.llvm.org/D64931)
This patch implements the address space cast lowering to the corresponding
sign extension, zero extension, or truncate instructions.
Related to https://bugs.llvm.org/show_bug.cgi?id=42359
Reviewers: rnk, craig.topper, RKSimon
Subscribers: hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D69639
InstCombine may synthesize FMINNUM/FMAXNUM nodes from fcmp+select
sequences (where the fcmp is marked nnan). Currently, if the
target does not otherwise handle these nodes, they'll get expanded
to libcalls to fmin/fmax. However, these functions may reside in
libm, which may introduce a library dependency that was not originally
present in the source code, potentially resulting in link failures.
To fix this problem, add code to TargetLowering::expandFMINNUM_FMAXNUM
to expand FMINNUM/FMAXNUM to a compare+select sequence instead of the
libcall. This is done only if the node is marked as "nnan"; in this case,
the expansion to compare+select is always correct. This also suffices to
catch all cases where FMINNUM/FMAXNUM was synthesized as above.
Differential Revision: https://reviews.llvm.org/D70965
This is an alternative to D64662 that shares more code between
strict and non-strict nodes. It's modeled after the implementation
that I did for softening.
Differential Revision: https://reviews.llvm.org/D70867
As it can be seen from accompanying cleanup, it is not unheard of
to write `~Known.Zero` meaning "what maximal value can this KnownBits
produce". But i think `~Known.Zero` isn't *that* self-explanatory,
as compared to a method with a name.
Note that not all `~Known.Zero` places were cleaned up,
only those where this arguably improves things.
These nodes have a FIXME that they only get here because a Custom
handler returned SDValue() instead of the original Op.
Even though we aren't expanding them, we should return true here to
prevent ConvertNodeToLibcall from also trying to process them until
the FIXME has been addressed.
I'm hoping to add checking to ConvertNodeToLibcall to make sure
we don't give it nodes it doesn't have support for.
The code that processes the Results vector also calls ReplaceNode
and makes ExpandNode return true.
If we don't add it to the Results node, we end up returning false
from ExpandNode. This causes ConvertNodeToLibcall to be called next.
But ConvertNodeToLibcall doesn't do anything for shifts so they
just pass through unmodified. Except for printing a debug message.
Ultimately, I'd like to add more checks to ExpandNode and
ConvertNodeToLibcall to make sure we don't have nodes marked as
Expand that don't have any Expand or libcall handling.
These will be needed for ARM fp-instrinsics.ll which is currently
XFAILed.
One of the getOperand calls in SoftenFloatRes_FP_EXTEND was not
taking strict FP into account. It only affected the call
to setTypeListBeforeSoften which only has an effect on some targets.
We would previously fallback if the type wasn't f32/f64/f128. But
I don't think any of the other floating point types ever go through
the softening code anyway. So this code is dead.
Summary: This combine showed up as needed when exploring the regression when processing the DAG in topological order.
Reviewers: craig.topper, efriedma, RKSimon, lebedev.ri
Subscribers: llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D68195
This is based on what's required for softening fp128 operations on 32-bit X86 assuming f32/f64/f80 are legal. So there could be some things missing.
Differential Revision: https://reviews.llvm.org/D70654
Summary: This will be enhanced in a follow up to add strict fp support
Reviewers: efriedma
Reviewed By: efriedma
Subscribers: hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D70751
This has been factored out of D70654 which will add strict FP support to these functions. By making the helpers we avoid repeating even more code.
Differential Revision: https://reviews.llvm.org/D70736
MVE has a basic symmetry between it's normal loads/store operations and
the masked variants. This means that masked loads and stores can use
pre-inc and post-inc addressing modes, just like the standard loads and
stores already do.
To enable that, this patch adds all the relevant infrastructure for
treating masked loads/stores addressing modes in the same way as normal
loads/stores.
This involves:
- Adding an AddressingMode to MaskedLoadStoreSDNode, along with an extra
Offset operand that is added after the PtrBase.
- Extending the IndexedModeActions from 8bits to 16bits to store the
legality of masked operations as well as normal ones. This array is
fairly small, so doubling the size still won't make it very large.
Offset masked loads can then be controlled with
setIndexedMaskedLoadAction, similar to standard loads.
- The same methods that combine to indexed loads, such as
CombineToPostIndexedLoadStore, are adjusted to handle masked loads in
the same way.
- The ARM backend is then adjusted to make use of these indexed masked
loads/stores.
- The X86 backend is adjusted to hopefully be no functional changes.
Differential Revision: https://reviews.llvm.org/D70176
There seems to have been a misunderstanding of what ISD::FTRUNC
represents. ISD::FTRUNC is equivalent to llvm.trunc which takes
a floating point value, truncates it without changing the size
of the value and returns it.
Despite its similar name, its different than the fptrunc instruction
in IR which changes a floating point value to a smaller floating
point value. fptrunc is represented by ISD::FP_ROUND in SelectionDAG.
Since the ISD::FP_TO_FP16 node takes a floating point value and
converts it to f16 its more similar to ISD::FP_ROUND. In fact there
is identical code to what is being removed here in SoftenFloatRes_FP_ROUND.
I assume this bug was never encountered because it would require
f16 to be legalized by softening rather than the default of
promoting.
We already have this simplification at node-creation-time, but
the test from:
https://bugs.llvm.org/show_bug.cgi?id=44139
...shows that we can combine our way to an assert/crash too.
I need to be able to drop an operand for STRICT_FP_ROUND handling on X86. Merging these functions gives me the ArrayRef interface that passes the return type, operands, and debugloc instead of the Node.
Differential Revision: https://reviews.llvm.org/D70503
Summary:
This is a preparatory cleanup before i add more
of this fold to deal with comparisons with non-zero.
In essence, the current lowering is:
```
Name: (X % C1) == 0 -> X * C3 <= C4
Pre: (C1 u>> countTrailingZeros(C1)) * C3 == 1
%zz = and i8 C3, 0 ; trick alive into making C3 avaliable in precondition
%o0 = urem i8 %x, C1
%r = icmp eq i8 %o0, 0
=>
%zz = and i8 C3, 0 ; and silence it from complaining about said reg
%C4 = -1 /u C1
%n0 = mul i8 %x, C3
%n1 = lshr i8 %n0, countTrailingZeros(C1) ; rotate right
%n2 = shl i8 %n0, ((8-countTrailingZeros(C1)) %u 8) ; rotate right
%n3 = or i8 %n1, %n2 ; rotate right
%r = icmp ule i8 %n3, %C4
```
https://rise4fun.com/Alive/oqd
It kinda just works, really no weird edge-cases.
But it isn't all that great for when comparing with non-zero.
In particular, given `(X % C1) == C2`, there will be problems
in the always-false tautological case where `C2 u>= C1`:
https://rise4fun.com/Alive/pH3
That case is tautological, always-false:
```
Name: (X % Y) u>= Y
%o0 = urem i8 %x, %y
%r = icmp uge i8 %o0, %y
=>
%r = false
```
https://rise4fun.com/Alive/ofu
While we can't/shouldn't get such tautological case normally,
we do deal with non-splat vectors, so unless we want to give up
in this case, we need to fixup/short-circuit such lanes.
There are two lowering variants:
1. We can blend between whatever computed result and the correct tautological result
```
Name: (X % C1) == C2 -> X * C3 <= C4 || false
Pre: (C2 == 0 || C1 u<= C2) && (C1 u>> countTrailingZeros(C1)) * C3 == 1
%zz = and i8 C3, 0 ; trick alive into making C3 avaliable in precondition
%o0 = urem i8 %x, C1
%r = icmp eq i8 %o0, C2
=>
%zz = and i8 C3, 0 ; and silence it from complaining about said reg
%C4 = -1 /u C1
%n0 = mul i8 %x, C3
%n1 = lshr i8 %n0, countTrailingZeros(C1) ; rotate right
%n2 = shl i8 %n0, ((8-countTrailingZeros(C1)) %u 8) ; rotate right
%n3 = or i8 %n1, %n2 ; rotate right
%is_tautologically_false = icmp ule i8 C1, C2
%res = icmp ule i8 %n3, %C4
%r = select i1 %is_tautologically_false, i1 0, i1 %res
```
https://rise4fun.com/Alive/PjT5https://rise4fun.com/Alive/1KV
2. We can invert the comparison result
```
Name: (X % C1) == C2 -> X * C3 <= C4 || false
Pre: (C2 == 0 || C1 u<= C2) && (C1 u>> countTrailingZeros(C1)) * C3 == 1
%zz = and i8 C3, 0 ; trick alive into making C3 avaliable in precondition
%o0 = urem i8 %x, C1
%r = icmp eq i8 %o0, C2
=>
%zz = and i8 C3, 0 ; and silence it from complaining about said reg
%C4 = -1 /u C1
%n0 = mul i8 %x, C3
%n1 = lshr i8 %n0, countTrailingZeros(C1) ; rotate right
%n2 = shl i8 %n0, ((8-countTrailingZeros(C1)) %u 8) ; rotate right
%n3 = or i8 %n1, %n2 ; rotate right
%is_tautologically_false = icmp ule i8 C1, C2
%C4_fixed = select i1 %is_tautologically_false, i8 -1, i8 %C4
%res = icmp ule i8 %n3, %C4_fixed
%r = xor i1 %res, %is_tautologically_false
```
https://rise4fun.com/Alive/2xChttps://rise4fun.com/Alive/jpb5
3. We can expand into `and`/`or`:
https://rise4fun.com/Alive/WGnhttps://rise4fun.com/Alive/lcb5
Blend-one is likely better since we avoid having to load the
replacement from constant pool. `xor` is second best since
it's still pretty general. I'm not adding `and`/`or` variants.
Reviewers: RKSimon, craig.topper, spatel
Reviewed By: RKSimon
Subscribers: nick, hiraditya, xbolva00, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D70051
float node
This patch add an option 'disable-strictnode-mutation' to prevent strict
node mutating to an normal node.
So we can make sure that the patch which sets strict-node as legal works
correctly.
Patch by Chen Liu(LiuChen3)
Differential Revision: https://reviews.llvm.org/D70226
Summary:
Most libraries are defined in the lib/ directory but there are also a
few libraries defined in tools/ e.g. libLLVM, libLTO. I'm defining
"Component Libraries" as libraries defined in lib/ that may be included in
libLLVM.so. Explicitly marking the libraries in lib/ as component
libraries allows us to remove some fragile checks that attempt to
differentiate between lib/ libraries and tools/ libraires:
1. In tools/llvm-shlib, because
llvm_map_components_to_libnames(LIB_NAMES "all") returned a list of
all libraries defined in the whole project, there was custom code
needed to filter out libraries defined in tools/, none of which should
be included in libLLVM.so. This code assumed that any library
defined as static was from lib/ and everything else should be
excluded.
With this change, llvm_map_components_to_libnames(LIB_NAMES, "all")
only returns libraries that have been added to the LLVM_COMPONENT_LIBS
global cmake property, so this custom filtering logic can be removed.
Doing this also fixes the build with BUILD_SHARED_LIBS=ON
and LLVM_BUILD_LLVM_DYLIB=ON.
2. There was some code in llvm_add_library that assumed that
libraries defined in lib/ would not have LLVM_LINK_COMPONENTS or
ARG_LINK_COMPONENTS set. This is only true because libraries
defined lib lib/ use LLVMBuild.txt and don't set these values.
This code has been fixed now to check if the library has been
explicitly marked as a component library, which should now make it
easier to remove LLVMBuild at some point in the future.
I have tested this patch on Windows, MacOS and Linux with release builds
and the following combinations of CMake options:
- "" (No options)
- -DLLVM_BUILD_LLVM_DYLIB=ON
- -DLLVM_LINK_LLVM_DYLIB=ON
- -DBUILD_SHARED_LIBS=ON
- -DBUILD_SHARED_LIBS=ON -DLLVM_BUILD_LLVM_DYLIB=ON
- -DBUILD_SHARED_LIBS=ON -DLLVM_LINK_LLVM_DYLIB=ON
Reviewers: beanz, smeenai, compnerd, phosek
Reviewed By: beanz
Subscribers: wuzish, jholewinski, arsenm, dschuff, jyknight, dylanmckay, sdardis, nemanjai, jvesely, nhaehnle, mgorny, mehdi_amini, sbc100, jgravelle-google, hiraditya, aheejin, fedor.sergeev, asb, rbar, johnrusso, simoncook, apazos, sabuasal, niosHD, jrtc27, MaskRay, zzheng, edward-jones, atanasyan, steven_wu, rogfer01, MartinMosbeck, brucehoult, the_o, dexonsmith, PkmX, jocewei, jsji, dang, Jim, lenary, s.egerton, pzheng, sameer.abuasal, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D70179
This allows operations that are marked Custom, but have some type
combinations that are legal to get past this code.
Add custom mutation code to X86's Select function for the nodes
that don't have isel patterns yet.
Summary:
Convert (uaddo (uaddo x, y), carryIn) into addcarry x, y, carryIn if-and-only-if the carry flags of the first two uaddo are merged via OR or XOR.
Work remaining: match ADD, etc.
Reviewers: craig.topper, RKSimon, spatel, niravd, jonpa, uweigand, deadalnix, nikic, lebedev.ri, dmgreen, chfast
Reviewed By: lebedev.ri
Subscribers: chfast, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D70079
This is recommit of commit e6584b2b7b, which was reverted in
30e7ee3c4b together with af57dbf12e.
Original message is below.
Enumerations that describe rounding mode and exception behavior were
defined inside ConstrainedFPIntrinsic. It makes sense to use the same
definitions to represent the same properties in other cases, not only
in constrained intrinsics. It was however inconvenient as required to
include constrained intrinsics definitions even if they were not needed.
Also using long scope prefix reduced readability.
This change moves these definitioins to the namespace llvm::fp.
No functional changes.
Differential Revision: https://reviews.llvm.org/D69552
Summary
In several places we need to enumerate all constrained intrinsics or IR
nodes that should be represented by them. It is easy to miss some of
the cases. To make working with these intrinsics more convenient and
robust, this change introduces file containing definitions of all
constrained intrinsics and some of their properties. This file can be
included to generate constrained intrinsics processing code.
Reviewers: kpn, andrew.w.kaylor, cameron.mcinally, uweigand
Subscribers: hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D69887
Cleanup handling of the denormal-fp-math attribute. Consolidate places
checking the allowed names in one place.
This is in preparation for introducing FP type specific variants of
the denormal-fp-mode attribute. AMDGPU will switch to using this in
place of the current hacky use of subtarget features for the denormal
mode.
Introduce a new header for dealing with FP modes. The constrained
intrinsic classes define related enums that should also be moved into
this header for uses in other contexts.
The verifier could use a check to make sure the denorm-fp-mode
attribute is sane, but there currently isn't one.
Currently, DAGCombiner incorrectly asssumes non-IEEE behavior by
default in the one current user. Clang must be taught to start
emitting this attribute by default to avoid regressions when this is
switched to assume ieee behavior if the attribute isn't present.
AMDGPU needs to know the FP mode for the function to answer this
correctly when this is removed from the subtarget.
AArch64 had to make this more complicated by using this from an IR
hook, so add an IR typed overload.
Previously we mutated the node and then converted it to a libcall. But this loses the chain information.
This patch keeps the chain, but unfortunately breaks tail call optimization as the functions involved in deciding if a node is in tail call position can't handle the chain. But correct ordering seems more important to be right.
Somehow the SystemZ tests improved. I looked at one of them and it seemed that we're handling the split vector elements in a different order and that made the copies work better.
Differential Revision: https://reviews.llvm.org/D70334
and a follow-up NFC rearrangement as it's causing a crash on valid. Testcase is on the original review thread.
This reverts commits af57dbf12e and e6584b2b7b
* Implements scalable size queries for MVTs, split out from D53137.
* Contains a fix for FindMemType to avoid using scalable vector type
to contain non-scalable types.
* Explicit casts for several places where implicit integer sign
changes or promotion from 32 to 64 bits caused problems.
* CodeGenDAGPatterns will treat scalable and non-scalable vector types
as different.
Reviewers: greened, cameron.mcinally, sdesmalen, rovka
Reviewed By: rovka
Differential Revision: https://reviews.llvm.org/D66871
These were both recently added. While the call to GetSoftenedFloat
is a little more optimal, we don't do it in the expand for
FP_TO_SINT/UINT so there's no real reason to do it here. This
avoids a FIXME for strict fp.
This doesn't handle softening the input type, but we don't handle
softening any of the strict nodes yet. Skipping that made it easy
to reuse an existing function for creating a libcall from a node
with a chain.
Before this we were emitting a bitcast to integer from the lowering
code that itself will need to be legalized. By calling
GetSoftenedFloat we get the integer conversion in one step without
needing to relegalize a bitcast.
This code isn't exercised, and was in the wrong place. If we need
this, we would need to promote the type before figuring out which
libcall to use.
I'm choosing to remove it rather than fixing since we don't
support PromoteFloat for LRINT/LROUND/LLRINT/LLROUND when the
result type is legal so I don't see much reason to support it
for the case where the result type isn't legal.
These too functions are were the same except for which libcall gets
emitted. Just merge them into one.
This is prep work for some other work including strict fp support.
Enumerations that describe rounding mode and exception behavior were
defined inside ConstrainedFPIntrinsic. It makes sense to use the same
definitions to represent the same properties in other cases, not only
in constrained intrinsics. It was however inconvenient as required to
include constrained intrinsics definitions even if they were not needed.
Also using long scope prefix reduced readability.
This change moves these definitioins to the namespace llvm::fp.
No functional changes.
Differential Revision: https://reviews.llvm.org/D69552
I reviewed the diff hunks of 05da2fe521 that don't contain
'#include' lines, and found two unintended changes. I deleted a header
banner inadvertently while inserting a header, and changed the
indentation of a constructor in an odd way. Add back the banner, and
reformat the constructor.
Matt Arsenault