Add a reproducer verifier that catches:
- Missing or invalid home directory
- Missing or invalid working directory
- Missing or invalid module/symbol paths
- Missing files from the VFS
The verifier is enabled by default during replay, but can be skipped by
passing --reproducer-no-verify.
Differential revision: https://reviews.llvm.org/D86497
This patch changes errors in `SmallVector::grow` that are independent of
memory capacity to be reported using report_fatal_error or
std::length_error instead of report_bad_alloc_error, which falsely signals
an OOM.
It also cleans up a few related things:
- makes report_bad_alloc_error to print the failure reason passed
to it.
- fixes the documentation to indicate that report_bad_alloc_error
calls `abort()` not "an assertion"
- uses a consistent name for the size/capacity argument to `grow`
and `grow_pod`
Reviewed By: mehdi_amini, MaskRay
Differential Revision: https://reviews.llvm.org/D86892
Before upstream a new target called CSKY, make a new triple of that called Triple::csky.
For now, it's a 32-bit little endian target and the detail can be referred at D86269.
This is the split part of D86269, which add a new target called CSKY.
Differential Revision: https://reviews.llvm.org/D86505
This relands e9a3d1a401 which was originally
missing linking LLVMSupport into LLMVFileCheck which broke the SHARED_LIBS build.
Original summary:
The actual FileCheck logic seems to be implemented in LLVMSupport. I don't see a
good reason for having FileCheck implemented there as it has a very specific use
while LLVMSupport is a dependency of pretty much every LLVM tool there is. In
fact, the only use of FileCheck I could find (outside the FileCheck tool and the
FileCheck unit test) is a single call in GISelMITest.h.
This moves the FileCheck logic to its own LLVMFileCheck library. This way only
FileCheck and the GlobalISelTests now have a dependency on this code.
Reviewed By: jhenderson
Differential Revision: https://reviews.llvm.org/D86344
Currently it is hard to avoid having LLVM link to the system install of
ncurses, since it uses check_library_exists to find e.g. libtinfo and
not find_library or find_package.
With this change the ncurses lib is found with find_library, which also
considers CMAKE_PREFIX_PATH. This solves an issue for the spack package
manager, where we want to use the zlib installed by spack, and spack
provides the CMAKE_PREFIX_PATH for it.
This is a similar change as https://reviews.llvm.org/D79219, which just
landed in master.
Patch By: haampie
Differential Revision: https://reviews.llvm.org/D85820
Add a reproducer verifier that catches:
- Missing or invalid home directory
- Missing or invalid working directory
- Missing or invalid module/symbol paths
- Missing files from the VFS
The verifier is enabled by default during replay, but can be skipped by
passing --reproducer-no-verify.
Differential revision: https://reviews.llvm.org/D86497
The actual FileCheck logic seems to be implemented in LLVMSupport. I don't see a
good reason for having FileCheck implemented there as it has a very specific use
while LLVMSupport is a dependency of pretty much every LLVM tool there is. In
fact, the only use of FileCheck I could find (outside the FileCheck tool and the
FileCheck unit test) is a single call in GISelMITest.h.
This moves the FileCheck logic to its own LLVMFileCheck library. This way only
FileCheck and the GlobalISelTests now have a dependency on this code.
Reviewed By: jhenderson
Differential Revision: https://reviews.llvm.org/D86344
Add printf-style precision specifier to pad numbers to a given number of
digits when matching them if the value is smaller than the given
precision. This works on both empty numeric expression (e.g. variable
definition from input) and when matching a numeric expression. The
syntax is as follows:
[[#%.<precision><format specifier>, ...]
where <format specifier> is optional and ... can be a variable
definition or not with an empty expression or not. In the absence of a
precision specifier, a variable definition will accept leading zeros.
Reviewed By: jhenderson, grimar
Differential Revision: https://reviews.llvm.org/D81667
The introduction of find_library for ncurses caused more issues than it solved problems. The current open issue is it makes the static build of LLVM fail. It is better to revert for now, and get back to it later.
Revert "[CMake] Fix an issue where get_system_libname creates an empty regex capture on windows"
This reverts commit 1ed1e16ab8.
Revert "Fix msan build"
This reverts commit 34fe9613dd.
Revert "[CMake] Always mark terminfo as unavailable on Windows"
This reverts commit 76bf26236f.
Revert "[CMake] Fix OCaml build failure because of absolute path in system libs"
This reverts commit 8e4acb82f7.
Revert "[CMake] Don't look for terminfo libs when LLVM_ENABLE_TERMINFO=OFF"
This reverts commit 495f91fd33.
Revert "Use find_library for ncurses"
This reverts commit a52173a3e5.
Differential revision: https://reviews.llvm.org/D86521
This patch optionally replaces the CRT allocator (i.e., malloc and free) with rpmalloc (mixed public domain licence/MIT licence) or snmalloc (MIT licence) or mimalloc (MIT licence). Please note that the source code for these allocators must be available outside of LLVM's tree.
To enable, use `cmake ... -DLLVM_INTEGRATED_CRT_ALLOC=D:/git/rpmalloc -DLLVM_USE_CRT_RELEASE=MT` where `D:/git/rpmalloc` has already been git clone'd from `https://github.com/mjansson/rpmalloc`. The same applies to snmalloc and mimalloc.
When enabled, the allocator will be embeded (statically linked) into the LLVM tools & libraries. This currently only works with the static CRT (/MT), although using the dynamic CRT (/MD) could potentially work as well in the future.
When enabled, this changes the memory stack from:
new/delete -> MS VC++ CRT malloc/free -> HeapAlloc -> VirtualAlloc
to:
new/delete -> {rpmalloc|snmalloc|mimalloc} -> VirtualAlloc
The goal of this patch is to bypass the application's global heap - which is thread-safe thus inducing locking - and instead take advantage of a modern lock-free, thread cache, allocator. On a 6-core Xeon Skylake we observe a 2.5x decrease in execution time when linking a large scale application with LLD and ThinLTO (12 min 20 sec -> 5 min 34 sec), when all hardware threads are being used (using LLD's flag /opt:lldltojobs=all). On a dual 36-core Xeon Skylake with all hardware threads used, we observe a 24x decrease in execution time (1 h 2 min -> 2 min 38 sec) when linking a large application with LLD and ThinLTO. Clang build times also see a decrease in the range 5-10% depending on the configuration.
Differential Revision: https://reviews.llvm.org/D71786
`GetFinalPathNameByHandleW(,,N,)` returns:
- `< N` on success (this value does not include the size of the terminating null character)
- `>= N` if buffer is too small (this value includes the size of the terminating null character)
So, when `N == Buffer.capacity() - 1`, we need to resize buffer if return value is > `Buffer.capacity() - 2`.
Also, we can set `N` to `Buffer.capacity()`.
Thus, without this patch `realPathFromHandle()` returns unfilled buffer when length of the final path of the file is equal to `Buffer.capacity()` or `Buffer.capacity() - 1`.
Reviewed By: andrewng, amccarth
Differential Revision: https://reviews.llvm.org/D86564
The non-standard header file `<sysexits.h>` provides some return values.
`EX_IOERR` is used to as a special value to signal a broken pipe to the clang driver.
On z/OS Unix System Services, this header file does not exists. This patch
- adds a check for `<sysexits.h>`, removing the dependency on `LLVM_ON_UNIX`
- adds a new header file `llvm/Support/ExitCodes`, which either includes
`<sysexits.h>` or defines `EX_IOERR`
- updates the users of `EX_IOERR` to include the new header file
Reviewed By: hubert.reinterpretcast
Differential Revision: https://reviews.llvm.org/D83472
Currently `strace llvm-dwarfdump x.debug >/tmp/file`:
ioctl(1, TCGETS, 0x7ffd64d7f340) = -1 ENOTTY (Inappropriate ioctl for device)
write(1, " DW_AT_decl_line\t(89)\n"..., 4096) = 4096
ioctl(1, TCGETS, 0x7ffd64d7f400) = -1 ENOTTY (Inappropriate ioctl for device)
ioctl(1, TCGETS, 0x7ffd64d7f410) = -1 ENOTTY (Inappropriate ioctl for device)
ioctl(1, TCGETS, 0x7ffd64d7f400) = -1 ENOTTY (Inappropriate ioctl for device)
After this patch:
write(1, "0000000000001102 \"strlen\")\n "..., 4096) = 4096
write(1, "site\n DW_AT_low"..., 4096) = 4096
write(1, "d53)\n\n0x000e4d4d: DW_TAG_G"..., 4096) = 4096
The same speedup can be achieved by `--color=0` but that is not much convenient.
This implementation has been suggested by Joerg Sonnenberger.
Differential Revision: https://reviews.llvm.org/D86406
Support -march=sapphirerapids for x86.
Compare with Icelake Server, it includes 14 more new features. They are
amxtile, amxint8, amxbf16, avx512bf16, avx512vp2intersect, cldemote,
enqcmd, movdir64b, movdiri, ptwrite, serialize, shstk, tsxldtrk, waitpkg.
Reviewed By: craig.topper
Differential Revision: https://reviews.llvm.org/D86503
For the Windows GNU platform, CMAKE_FIND_LIBRARY_PREFIXES is a list
containing an empty string, which ended up in a regex capturing group,
which is invalid in CMake's regex engine. With this change, we get the
following:
set(CMAKE_FIND_LIBRARY_PREFIXES "lib" "")
set(CMAKE_FIND_LIBRARY_SUFFIXES ".dll.a" ".a" ".lib")
get_system_libname(path/to/libz.dll.a zlib)
message("${zlib}")
outputs z, as expected.
Patch By: haampie
Differential Revision: https://reviews.llvm.org/D86434
This commit makes FileCheck print all CHECK-NOT directive failure in a
CHECK-NOT block even if one fails. Prior to that, it would stop trying
to match CHECK-NOT directive as soon as one in the block fails.
Reviewed By: jhenderson
Differential Revision: https://reviews.llvm.org/D86315
See http://lists.llvm.org/pipermail/llvm-dev/2017-June/113975.html for a related previous discussion.
Many tools install signal handlers to print stack traces and optionally
symbolize the addresses with an external program 'llvm-symbolizer' (when
searching for 'llvm-symbolizer', the directory containg the executable
is preferred over PATH).
'llvm-symbolizer' can be slow if the executable is large and/or if
llvm-symbolizer' itself is under-optimized. For example, my 'llvm-lto2' from a
-DCMAKE_BUILD_TYPE=Debug build is 443MiB. The 'llvm-symbolizer' from the same
build takes ~2s to symbolize it. (An optimized 'llvm-symbolizer' takes 0.34s).
A crashed clang may take more than 5s to symbolize a stack trace.
If a test file has several `not --crash` RUN lines. It can be very slow in a Debug build.
This patch makes `not --crash` set an environment variable to suppress symbolization.
This is similar to D33804 which uses a command line option.
I pick 'symbolization' instead of 'symbolication' because the former is
used much more commonly and its stem matches 'llvm-symbolizer'.
Also set LLVM_DISABLE_CRASH_REPORT=1, which is currently only applicable on
`__APPLE__`.
Reviewed By: dblaikie, aganea
Differential Revision: https://reviews.llvm.org/D86170
In e99dee82b0, the "out_of_memory_new_handler" was changed to be
explicitly initialized instead of relying on a global static
constructor.
However before this change, install_out_of_memory_new_handler could be
called multiple times while it asserts right now.
We can be more tolerant to calling multiple time InitLLVM without
reintroducing a global constructor for this handler.
Differential Revision: https://reviews.llvm.org/D86330
This patch moves FixedPointSemantics and APFixedPoint
from Clang to LLVM ADT.
This will make it easier to use the fixed-point
classes in LLVM for constructing an IR builder for
fixed-point and for reusing the APFixedPoint class
for constant evaluation purposes.
RFC: http://lists.llvm.org/pipermail/llvm-dev/2020-August/144025.html
Reviewed By: leonardchan, rjmccall
Differential Revision: https://reviews.llvm.org/D85312
D85820 introduced a full path in the LLVM_SYSTEM_LIBS property of the
LLVMSupport target, which made the OCaml bindings fail to build, since
they use -l [system_lib] flags for every lib in LLVM_SYSTEM_LIBS, which
cannot work with absolute paths.
This patch solves the issue in a similar vain as ZLIB does it: it adds
the full library path to imported_libs, and adds a stripped down version
without directories, lib prefix and lib suffix to system_libs
In the future we should probably make some changes to LLVM_SYSTEM_LIBS,
since both zlib and ncurses do not necessarily have to be system libs
anymore due to the find_package / find_library bits introduced in
D85820 and D79219.
Patch By: haampie
Differential Revision: https://reviews.llvm.org/D86134
Currently it is hard to avoid having LLVM link to the system install of
ncurses, since it uses check_library_exists to find e.g. libtinfo and
not find_library or find_package.
With this change the ncurses lib is found with find_library, which also
considers CMAKE_PREFIX_PATH. This solves an issue for the spack package
manager, where we want to use the zlib installed by spack, and spack
provides the CMAKE_PREFIX_PATH for it.
This is a similar change as https://reviews.llvm.org/D79219, which just
landed in master.
Differential revision: https://reviews.llvm.org/D85820
... if the collected file doesn't exists.
This fixes the situation where LLDB can't create a file when capturing a
reproducer because the parent path doesn't exist, but can during replay
because the file collector created the directory hierarchy even though
the file doesn't exist.
This is covered by the lldb reproducer test suite.
On z/OS, the information is stored in the Common System Data Area
(CSD). It is the number of CPs allocated to the current LPAR.
Reviewers: aganea, hubert.reinterpertcast, MaskRay
Reviewed By: hubert.reinterpertcast
Differential Revision: https://reviews.llvm.org/D85531
Rather than handling zlib handling manually, use find_package from CMake
to find zlib properly. Use this to normalize the LLVM_ENABLE_ZLIB,
HAVE_ZLIB, HAVE_ZLIB_H. Furthermore, require zlib if LLVM_ENABLE_ZLIB is
set to YES, which requires the distributor to explicitly select whether
zlib is enabled or not. This simplifies the CMake handling and usage in
the rest of the tooling.
This is a reland of abb0075 with all followup changes and fixes that
should address issues that were reported in PR44780.
Differential Revision: https://reviews.llvm.org/D79219
Adds the binary format goff and the operating system zos to the triple
class. goff is selected as default binary format if zos is choosen as
operating system. No further functionality is added.
Reviewers: efriedma, tahonermann, hubert.reinterpertcast, MaskRay
Reviewed By: efriedma, tahonermann, hubert.reinterpertcast
Differential Revision: https://reviews.llvm.org/D82081
Rather than handling zlib handling manually, use find_package from CMake
to find zlib properly. Use this to normalize the LLVM_ENABLE_ZLIB,
HAVE_ZLIB, HAVE_ZLIB_H. Furthermore, require zlib if LLVM_ENABLE_ZLIB is
set to YES, which requires the distributor to explicitly select whether
zlib is enabled or not. This simplifies the CMake handling and usage in
the rest of the tooling.
This is a reland of abb0075 with all followup changes and fixes that
should address issues that were reported in PR44780.
Differential Revision: https://reviews.llvm.org/D79219
Rather than handling zlib handling manually, use find_package from CMake
to find zlib properly. Use this to normalize the LLVM_ENABLE_ZLIB,
HAVE_ZLIB, HAVE_ZLIB_H. Furthermore, require zlib if LLVM_ENABLE_ZLIB is
set to YES, which requires the distributor to explicitly select whether
zlib is enabled or not. This simplifies the CMake handling and usage in
the rest of the tooling.
This is a reland of abb0075 with all followup changes and fixes that
should address issues that were reported in PR44780.
Differential Revision: https://reviews.llvm.org/D79219
This quietly disabled use of zlib on Windows even when building with
-DLLVM_ENABLE_ZLIB=FORCE_ON.
> Rather than handling zlib handling manually, use find_package from CMake
> to find zlib properly. Use this to normalize the LLVM_ENABLE_ZLIB,
> HAVE_ZLIB, HAVE_ZLIB_H. Furthermore, require zlib if LLVM_ENABLE_ZLIB is
> set to YES, which requires the distributor to explicitly select whether
> zlib is enabled or not. This simplifies the CMake handling and usage in
> the rest of the tooling.
>
> This is a reland of abb0075 with all followup changes and fixes that
> should address issues that were reported in PR44780.
>
> Differential Revision: https://reviews.llvm.org/D79219
This reverts commit 10b1b4a231 and follow-ups
64d99cc6ab and
f9fec0447e.
Previously the time complexity is O(|number of paths from the root to an
implied feature| * CPU_FWATURE_MAX) where CPU_FEATURE_MAX is 92.
The number of paths can be large (theoretically exponential).
For an inline asm statement, there is a code path
`clang::Parser::ParseAsmStatement -> clang::Sema::ActOnGCCAsmStmt -> ASTContext::getFunctionFeatureMap`
leading to potentially many calls of getImpliedEnabledFeatures (41 for my -march=native case).
We should improve the performance a bit in case the number of inline asm
statements is large (Linux kernel builds).
Reviewed By: craig.topper
Differential Revision: https://reviews.llvm.org/D85257
for the advantage outlined by D83639 ([OptTable] Support grouped short options)
Some behavior changes:
* -i={0,false} is removed. Use --no-inlines instead.
* --demangle={0,false} is removed. Use --no-demangle instead
* -untag-addresses={0,false} is removed. Use --no-untag-addresses instead
Added a higher level API OptTable::parseArgs which handles optional
initial options populated from an environment variable, expands response
files recursively, and parses options.
Reviewed By: jhenderson
Differential Revision: https://reviews.llvm.org/D83530
Commit https://reviews.llvm.org/rGcd53ded557c3 attempts to fix the
computation in computeHostNumPhysicalCores() to respect Affinity.
However, the GLIBC wrapper of the affinity system call fails with
a default size of cpu_set_t on systems that have more than 1024 CPUs.
This just fixes the computation on such large machines.
computeHostNumPhysicalCores() is designed to respect CPU affinity.
D84764 used sysconf(_SC_NPROCESSORS_ONLN) which does not respect
affinity.
SupportTests Threading.PhysicalConcurrency may fail if taskset -c is specified.
Craig Topper