When possible (e.g. internal linkage), strip preallocated attribute off
parameters/arguments.
This requires removing the "preallocated" operand bundle from the call
site, replacing @llvm.call.preallocated.arg() with an alloca and a
bitcast to i8*, and removing the @llvm.call.preallocated.setup(). Since
@llvm.call.preallocated.arg() can be called multiple times with the same
arg index, we create an alloca per arg index.
We add a @llvm.stacksave() where the @llvm.call.preallocated.setup() was
and a @llvm.stackrestore() after the preallocated call to prevent the
stack from blowing up. This is valid because the argument would normally
not exist on the stack after the call before the transformation.
This does not currently handle all possible preallocated calls. We will
need to figure out where to put @llvm.stackrestore() in the cases where
there is no obvious place to put it, for example conditional
preallocated calls, invokes.
This sort of transformation may need to be moved to somewhere more
accessible to accomodate similar transformations (like inlining) in the
future.
Reviewers: efriedma, hans
Subscribers: hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D80951
This is fixing warning from clang:
warning: private field 'ModuleSlice' is not used [-Wunused-private-field]
SmallPtrSetImpl<Function *> &ModuleSlice;
^
Differential Revision: https://reviews.llvm.org/D82027
Summary:
Introduction of OpenMP-specific information cache based on Attributor's `InformationCache`. This should make it easier to share information between them.
Reviewers: jdoerfert, JonChesterfield, hamax97, jhuber6, uenoku
Subscribers: yaxunl, hiraditya, guansong, uenoku, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D81798
As noted in D80236 - the early-cse pass was included here before:
D75145 / rG71a316883d50
But it got moved outside of the "extra" option there, then it
got dropped while adjusting -vector-combine:
rG6438ea45e053
rG57bb4787d72f
So this is restoring the behavior and adding a test to prevent
accidental changes again. I don't see an equivalent option for
the new pass manager.
Summary:
This patch splits the Attributor::run() function into multiple
functions.
Simple Logic changes to make this possible:
# Moved iteration count verification earlier.
# NumFinalAAs get set a little bit later.
Reviewers: jdoerfert, sstefan1, uenoku
Reviewed By: jdoerfert
Subscribers: hiraditya, uenoku, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D81022
Summary:
This patch splits the Attributor::run() function into multiple functions.
Simple Logic changes to make this possible:
# Moved iteration count verification earlier.
# NumFinalAAs get set a little bit later.
Reviewers: jdoerfert, sstefan1, uenoku
Reviewed By: jdoerfert
Subscribers: hiraditya, uenoku, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D81022
It is quite common to get multiple instances of optimization flags while building.
The following optimizations does not have cl::ZeroOrMore which causes errors during the build.
Reviewers: alexbdv,spop
Differential Revision: https://reviews.llvm.org/D81187
Remove the function Instruction::setProfWeight() and make
use of Instruction::copyMetadata(.., {LLVMContext::MD_prof}).
This is correct for all use cases of setProfWeight() as it
is applied to CallBase instructions only.
This change results in prof metadata copied intact even if
the source has "VP". The old pair of calls
extractProfTotalWeight() + setProfWeight() resulted in
setting branch_weights if the source had "VP" data.
Reviewers: yamauchi, davidxl
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D80987
When sampleFDO is enabled, people may expect they can use
-fno-profile-sample-use to opt-out using sample profile for a certain file.
That could be either for debugging purpose or for performance tuning purpose.
However, when thinlto is enabled, if a function in file A compiled with
-fno-profile-sample-use is imported to another file B compiled with
-fprofile-sample-use, the inlined copy of the function in file B may still
get its profile annotated.
The inconsistency may even introduce profile unused warning because if the
target is not compiled with explicit debug information flag, the function
in file A won't have its debug information enabled (debug information will
be enabled implicitly only when -fprofile-sample-use is used). After it is
imported into file B which is compiled with -fprofile-sample-use, profile
annotation for the outline copy of the function will fail because the
function has no debug information, and that will trigger profile unused
warning.
We add a new attribute use-sample-profile to control whether a function
will use its sample profile no matter for its outline or inline copies.
That will make the behavior of -fno-profile-sample-use consistent.
Differential Revision: https://reviews.llvm.org/D79959
Summary:
This simplifies the interface by storing the function analysis manager
with the InlineAdvisor, and, thus, not requiring it be passed each time
we inquire for an advice.
Reviewers: davidxl, asbirlea
Subscribers: eraman, hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D80405
Summary:
The working set size heuristics (ProfileSummaryInfo::hasHugeWorkingSetSize)
under the partial sample PGO may not be accurate because the profile is partial
and the number of hot profile counters in the ProfileSummary may not reflect the
actual working set size of the program being compiled.
To improve this, the (approximated) ratio of the the number of profile counters
of the program being compiled to the number of profile counters in the partial
sample profile is computed (which is called the partial profile ratio) and the
working set size of the profile is scaled by this ratio to reflect the working
set size of the program being compiled and used for the working set size
heuristics.
The partial profile ratio is approximated based on the number of the basic
blocks in the program and the NumCounts field in the ProfileSummary and computed
through the thin LTO indexing. This means that there is the limitation that the
scaled working set size is available to the thin LTO post link passes only.
Reviewers: davidxl
Subscribers: mgorny, eraman, hiraditya, steven_wu, dexonsmith, arphaman, dang, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D79831
ProfileSummaryInfo is updated seldom, as result of very specific
triggers. This patch clearly demarcates state updates from read-only uses.
This, arguably, improves readability and maintainability.
EarlyCSE was added with D75145, but the motivating test is
not regressed by removing the extra pass now. That might be
because VectorCombine altered the way it processes instructions,
or it might be from (re)moving VectorCombine in the pipeline.
The extra round of EarlyCSE appears to cost approximately
0.26% in compile-time as discussed in D80236, so we need some
evidence to justify its inclusion here, but we do not have
that (yet).
I suspect that between SLP and VectorCombine, we are creating
patterns that InstCombine and/or codegen are not prepared for,
but we will need to reduce those examples and include them as
PhaseOrdering and/or test-suite benchmarks.
If the caller needs to reponsible for making sure the MaybeAlign
has a value, then we should just make the caller convert it to an Align
with operator*.
I explicitly deleted the relational comparison operators that
were being inherited from Optional. It's unclear what the meaning
of two MaybeAligns were one is defined and the other isn't
should be. So make the caller reponsible for defining the behavior.
I left the ==/!= operators from Optional. But now that exposed a
weird quirk that ==/!= between Align and MaybeAlign required the
MaybeAlign to be defined. But now we use the operator== from
Optional that takes an Optional and the Value.
Differential Revision: https://reviews.llvm.org/D80455
There are 2 known problem patterns shown in the test diffs here:
vector horizontal ops (an x86 specialization) and vector reductions.
SLP has greater ability to match and fold those than vector-combine,
so let SLP have first chance at that.
This is a quick fix while we continue to improve vector-combine and
possibly canonicalize to reduction intrinsics.
In the longer term, we should improve matching of these patterns
because if they were created in the "bad" forms shown here, then we
would miss optimizing them.
I'm not sure what is happening with alias analysis on the addsub test.
The old pass manager now shows an extra line for that, and we see an
improvement that comes from SLP vectorizing a store. I don't know
what's missing with the new pass manager to make that happen.
Strangely, I can't reproduce the behavior if I compile from C++ with
clang and invoke the new PM with "-fexperimental-new-pass-manager".
Differential Revision: https://reviews.llvm.org/D80236
If we don't know anything about the alignment of a pointer, Align(1) is
still correct: all pointers are at least 1-byte aligned.
Included in this patch is a bugfix for an issue discovered during this
cleanup: pointers with "dereferenceable" attributes/metadata were
assumed to be aligned according to the type of the pointer. This
wasn't intentional, as far as I can tell, so Loads.cpp was fixed to
stop making this assumption. Frontends may need to be updated. I
updated clang's handling of C++ references, and added a release note for
this.
Differential Revision: https://reviews.llvm.org/D80072
See https://reviews.llvm.org/D74651 for the preallocated IR constructs
and LangRef changes.
In X86TargetLowering::LowerCall(), if a call is preallocated, record
each argument's offset from the stack pointer and the total stack
adjustment. Associate the call Value with an integer index. Store the
info in X86MachineFunctionInfo with the integer index as the key.
This adds two new target independent ISDOpcodes and two new target
dependent Opcodes corresponding to @llvm.call.preallocated.{setup,arg}.
The setup ISelDAG node takes in a chain and outputs a chain and a
SrcValue of the preallocated call Value. It is lowered to a target
dependent node with the SrcValue replaced with the integer index key by
looking in X86MachineFunctionInfo. In
X86TargetLowering::EmitInstrWithCustomInserter() this is lowered to an
%esp adjustment, the exact amount determined by looking in
X86MachineFunctionInfo with the integer index key.
The arg ISelDAG node takes in a chain, a SrcValue of the preallocated
call Value, and the arg index int constant. It produces a chain and the
pointer fo the arg. It is lowered to a target dependent node with the
SrcValue replaced with the integer index key by looking in
X86MachineFunctionInfo. In
X86TargetLowering::EmitInstrWithCustomInserter() this is lowered to a
lea of the stack pointer plus an offset determined by looking in
X86MachineFunctionInfo with the integer index key.
Force any function containing a preallocated call to use the frame
pointer.
Does not yet handle a setup without a call, or a conditional call.
Does not yet handle musttail. That requires a LangRef change first.
Tried to look at all references to inalloca and see if they apply to
preallocated. I've made preallocated versions of tests testing inalloca
whenever possible and when they make sense (e.g. not alloca related,
inalloca edge cases).
Aside from the tests added here, I checked that this codegen produces
correct code for something like
```
struct A {
A();
A(A&&);
~A();
};
void bar() {
foo(foo(foo(foo(foo(A(), 4), 5), 6), 7), 8);
}
```
by replacing the inalloca version of the .ll file with the appropriate
preallocated code. Running the executable produces the same results as
using the current inalloca implementation.
Reverted due to unexpectedly passing tests, added REQUIRES: asserts for reland.
Subscribers: hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D77689
See https://reviews.llvm.org/D74651 for the preallocated IR constructs
and LangRef changes.
In X86TargetLowering::LowerCall(), if a call is preallocated, record
each argument's offset from the stack pointer and the total stack
adjustment. Associate the call Value with an integer index. Store the
info in X86MachineFunctionInfo with the integer index as the key.
This adds two new target independent ISDOpcodes and two new target
dependent Opcodes corresponding to @llvm.call.preallocated.{setup,arg}.
The setup ISelDAG node takes in a chain and outputs a chain and a
SrcValue of the preallocated call Value. It is lowered to a target
dependent node with the SrcValue replaced with the integer index key by
looking in X86MachineFunctionInfo. In
X86TargetLowering::EmitInstrWithCustomInserter() this is lowered to an
%esp adjustment, the exact amount determined by looking in
X86MachineFunctionInfo with the integer index key.
The arg ISelDAG node takes in a chain, a SrcValue of the preallocated
call Value, and the arg index int constant. It produces a chain and the
pointer fo the arg. It is lowered to a target dependent node with the
SrcValue replaced with the integer index key by looking in
X86MachineFunctionInfo. In
X86TargetLowering::EmitInstrWithCustomInserter() this is lowered to a
lea of the stack pointer plus an offset determined by looking in
X86MachineFunctionInfo with the integer index key.
Force any function containing a preallocated call to use the frame
pointer.
Does not yet handle a setup without a call, or a conditional call.
Does not yet handle musttail. That requires a LangRef change first.
Tried to look at all references to inalloca and see if they apply to
preallocated. I've made preallocated versions of tests testing inalloca
whenever possible and when they make sense (e.g. not alloca related,
inalloca edge cases).
Aside from the tests added here, I checked that this codegen produces
correct code for something like
```
struct A {
A();
A(A&&);
~A();
};
void bar() {
foo(foo(foo(foo(foo(A(), 4), 5), 6), 7), 8);
}
```
by replacing the inalloca version of the .ll file with the appropriate
preallocated code. Running the executable produces the same results as
using the current inalloca implementation.
Subscribers: hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D77689
Along the lines of D77454 and D79968. Unlike loads and stores, the
default alignment is getPrefTypeAlign, to match the existing handling in
various places, including SelectionDAG and InstCombine.
Differential Revision: https://reviews.llvm.org/D80044
This reverts commit 454de99a6f.
The problem was that one of the ctor arguments of CallAnalyzer was left
to be const std::function<>&. A function_ref was passed for it, and then
the ctor stored the value in a function_ref field. So a std::function<>
would be created as a temporary, and not survive past the ctor
invocation, while the field would.
Tested locally by following https://github.com/google/sanitizers/wiki/SanitizerBotReproduceBuild
Original Differential Revision: https://reviews.llvm.org/D79917
Summary:
Replacing uses of std::function pointers or refs, or Optional, to
function_ref, since the usage pattern allows that. If the function is
optional, using a default parameter value (nullptr). This led to a few
parameter reshufles, to push all optionals to the end of the parameter
list.
Reviewers: davidxl, dblaikie
Subscribers: arsenm, jvesely, nhaehnle, eraman, hiraditya, haicheng, kerbowa, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D79917
This patch introduces an improvement in the Alignment of the loads
generated in createReplacementValues() by querying AAAlign attribute for
the best Alignment for the base.
Reviewed By: jdoerfert
Differential Revision: https://reviews.llvm.org/D76550
Summary:
This change introduces InliningAdvisor (and related APIs), the interface
that abstracts decision making away from the inlining pass. We will use
this interface to delegate decision making to a trained ML model,
subsequently (see referenced RFC).
RFC: http://lists.llvm.org/pipermail/llvm-dev/2020-April/140763.html
Reviewers: davidxl, eraman, dblaikie
Subscribers: mgorny, hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D79042
Summary:
Analyses that are statefull should not be retrieved through a proxy from
an outer IR unit, as these analyses are only invalidated at the end of
the inner IR unit manager.
This patch disallows getting the outer manager and provides an API to
get a cached analysis through the proxy. If the analysis is not
stateless, the call to getCachedResult will assert.
Reviewers: chandlerc
Subscribers: mehdi_amini, eraman, hiraditya, zzheng, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D72893
For AAReturnedValues we treated new and existing information differently
in the updateImpl. Only the latter was properly analyzed and
categorized. The former was thought to be analyzed in the subsequent
update. Since the Attributor does not support "self-updates" we need to
make sure the state is "stable" after each updateImpl invocation. That
is, if the surrounding information does not change, the state is valid.
Now we make sure all return values have been handled and properly
categorized each iteration. We might not update again if we have not
requested a non-fix attribute so we cannot "wait" for the next update to
analyze a new return value.
Bug reported by @sdmitriev.
We will now ensure ensure the return type of called function is the type
of all call sites we are going to rewrite. This avoids a problem
partially fixed by D79680. The part that was not covered is a use of
this "weird" casted call site (see `@func3` in `misc_crash.ll`).
misc_crash.ll checks are auto-generated now.
We should never give up on AAIsDead as it guards other AAs from
unreachable code (in which SSA properties are meaningless). We did
however use required dependences on some queries in AAIsDead which
caused us to invalidate AAIsDead if the queried AA got invalidated.
We now use optional dependences instead. The bug that exposed this is
added to the liveness.ll test and other test changes show the impact.
Bug report by @sdmitriev.
During an update of AAIsDead, new instructions become live. If we query
information from them, the result is often just the initial state, e.g.,
for call site `noreturn` and `nounwind`. We will now trigger an update
for cached attributes during the AAIsDead update, though other AAs might
later use the same API.
don't span their entire scope.
The previous commit (6d1c40c171) is an older version of the test.
Reviewed By: aprantl, vsk
Differential Revision: https://reviews.llvm.org/D79573
Summary:
In D65848 the function getFuncNameInModule was refactored to no longer use module.
This diff removes the parameter and rename the function name to avoid confusion.
Reviewers: wenlei, wmi, davidxl
Reviewed By: wenlei
Subscribers: hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D79310
The old QuerriedAAs contained two vectors, one for required one for
optional dependences (=queries). We now use a single vector and encode
the kind directly in the pointer.
This reduces memory consumption and makes the connection between
abstract attributes and their dependences clearer.
No functional change is intended, changes in the test are due to
different order in the query map. Neither the order before nor now is in
any way special.
---
Single run of the Attributor module and then CGSCC pass (oldPM)
for SPASS/clause.c (~10k LLVM-IR loc):
Before:
```
calls to allocation functions: 543734 (329735/s)
temporary memory allocations: 105895 (64217/s)
peak heap memory consumption: 19.19MB
peak RSS (including heaptrack overhead): 102.26MB
total memory leaked: 269.10KB
```
After:
```
calls to allocation functions: 513292 (341511/s)
temporary memory allocations: 106028 (70544/s)
peak heap memory consumption: 13.35MB
peak RSS (including heaptrack overhead): 95.64MB
total memory leaked: 269.10KB
```
Difference:
```
calls to allocation functions: -30442 (208506/s)
temporary memory allocations: 133 (-910/s)
peak heap memory consumption: -5.84MB
peak RSS (including heaptrack overhead): 0B
total memory leaked: 0B
```
---
Reviewed By: uenoku
Differential Revision: https://reviews.llvm.org/D78729
When we have an existing `argmemonly` or `inaccessiblememorargmemonly`
we used to "know" that information. However, interprocedural constant
propagation can invalidate these attributes. We now ignore and remove
these attributes for internal functions (which may be affected by IP
constant propagation), if we are deriving new attributes for the
function.
As we replace values with constants interprocedurally, we also need to
do this "look-through" step during the generic value traversal or we
would derive properties from replaced values. While this is often not
problematic, it is when we use the "kind" of a value for reasoning,
e.g., accesses to arguments allow `argmemonly`.
When we categorize a pointer value we bailed at `null` before. If we
know `null` is not a valid memory location we can ignore it as there
won't be an access at all.
We now use getPointerDereferenceableBytes to determine `nonnull` and
`dereferenceable` facts from the IR. We also use getPointerAlignment in
AAAlign for the same reason. The latter can interfere with callbacks so
we do restrict it to non-function-pointers for now.
In a recent patch we introduced a problem with abstract attributes that
were assumed dead at some point. Since `Attributor::updateAA` was
introduced in 95e0d28b71, we did not
remember the dependence on the liveness AA when an abstract attribute
was assumed dead and therefore not updated.
Explicit reproducer added in liveness.ll.
---
Single run of the Attributor module and then CGSCC pass (oldPM)
for SPASS/clause.c (~10k LLVM-IR loc):
Before:
```
calls to allocation functions: 509242 (345483/s)
temporary memory allocations: 98666 (66937/s)
peak heap memory consumption: 18.60MB
peak RSS (including heaptrack overhead): 103.29MB
total memory leaked: 269.10KB
```
After:
```
calls to allocation functions: 529332 (355494/s)
temporary memory allocations: 102107 (68574/s)
peak heap memory consumption: 19.40MB
peak RSS (including heaptrack overhead): 102.79MB
total memory leaked: 269.10KB
```
Difference:
```
calls to allocation functions: 20090 (1339333/s)
temporary memory allocations: 3441 (229400/s)
peak heap memory consumption: 801.45KB
peak RSS (including heaptrack overhead): 0B
total memory leaked: 0B
```
This is the first step to resolve a TODO in AAMemoryLocation and to fix
a bug we have when handling `byval` arguments of `readnone` call sites.
No functional change intended.
Summary:
This patch teaches shouldBeDeferred to take into account the total
cost of inlining.
Suppose we have a call hierarchy {A1,A2,A3,...}->B->C. (Each of A1,
A2, A3, ... calls B, which in turn calls C.)
Without this patch, shouldBeDeferred essentially returns true if
TotalSecondaryCost < IC.getCost()
where TotalSecondaryCost is the total cost of inlining B into As.
This means that if B is a small wraper function, for example, it would
get inlined into all of As. In turn, C gets inlined into all of As.
In other words, shouldBeDeferred ignores the cost of inlining C into
each of As.
This patch adds an option, inline-deferral-scale, to replace the
expression above with:
TotalCost < Allowance
where
- TotalCost is TotalSecondaryCost + IC.getCost() * # of As, and
- Allowance is IC.getCost() * Scale
For now, the new option defaults to -1, disabling the new scheme.
Reviewers: davidxl
Subscribers: eraman, hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D79138
Summary:
This was added in https://reviews.llvm.org/D2449, but I'm not sure it's
necessary since an inalloca value is never a Constant (should be an
AllocaInst).
Reviewers: hans, rnk
Subscribers: hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D79350
Before we eagerly put dependences into the QueryMap as soon as we
encountered them (via `Attributor::getAAFor<>` or
`Attributor::recordDependence`). Now we will wait to see if the
dependence is useful, that is if the target is not already in a fixpoint
state at the end of the update. If so, there is no need to record the
dependence at all.
Due to the abstraction via `Attributor::updateAA` we will now also treat
the very first update (during attribute creation) as we do subsequent
updates.
Finally this resolves the problematic usage of QueriedNonFixAA.
---
Single run of the Attributor module and then CGSCC pass (oldPM)
for SPASS/clause.c (~10k LLVM-IR loc):
Before:
```
calls to allocation functions: 554675 (389245/s)
temporary memory allocations: 101574 (71280/s)
peak heap memory consumption: 28.46MB
peak RSS (including heaptrack overhead): 116.26MB
total memory leaked: 269.10KB
```
After:
```
calls to allocation functions: 512465 (345559/s)
temporary memory allocations: 98832 (66643/s)
peak heap memory consumption: 22.54MB
peak RSS (including heaptrack overhead): 106.58MB
total memory leaked: 269.10KB
```
Difference:
```
calls to allocation functions: -42210 (-727758/s)
temporary memory allocations: -2742 (-47275/s)
peak heap memory consumption: -5.92MB
peak RSS (including heaptrack overhead): 0B
total memory leaked: 0B
```
Attributes that only depend on the value (=bit pattern) can be
initialized from uses in the must-be-executed-context (MBEC). We did use
`AAComposeTwoGenericDeduction` and `AAFromMustBeExecutedContext` before
to do this for some positions of these attributes but not for all. This
was fairly complicated and also problematic as we did run it in every
`updateImpl` call even though we only use known information. The new
implementation removes `AAComposeTwoGenericDeduction`* and
`AAFromMustBeExecutedContext` in favor of a simple interface
`AddInformation::fromMBEContext(...)` which we call from the
`initialize` methods of the "value attribute" `Impl` classes, e.g.
`AANonNullImpl:initialize`.
There can be two types of test changes:
1) Artifacts were we miss some information that was known before a
global fixpoint was reached and therefore available in an update
but not at the beginning.
2) Deduction for values we did not derive via the MBEC before or which
were not found as the `AAFromMustBeExecutedContext::updateImpl` was
never invoked.
* An improved version of AAComposeTwoGenericDeduction can be found in
D78718. Once we find a new use case that implementation will be able
to handle "generic" AAs better.
---
Single run of the Attributor module and then CGSCC pass (oldPM)
for SPASS/clause.c (~10k LLVM-IR loc):
Before:
```
calls to allocation functions: 468428 (328952/s)
temporary memory allocations: 77480 (54410/s)
peak heap memory consumption: 32.71MB
peak RSS (including heaptrack overhead): 122.46MB
total memory leaked: 269.10KB
```
After:
```
calls to allocation functions: 554720 (351310/s)
temporary memory allocations: 101650 (64376/s)
peak heap memory consumption: 28.46MB
peak RSS (including heaptrack overhead): 116.75MB
total memory leaked: 269.10KB
```
Difference:
```
calls to allocation functions: 86292 (556722/s)
temporary memory allocations: 24170 (155935/s)
peak heap memory consumption: -4.25MB
peak RSS (including heaptrack overhead): 0B
total memory leaked: 0B
```
Reviewed By: uenoku
Differential Revision: https://reviews.llvm.org/D78719
Summary:
This factors cost and reporting out of the inlining workflow, thus
making it easier to reuse when driving inlining from the upcoming
InliningAdvisor.
Depends on: D79215
Reviewers: davidxl, echristo
Subscribers: eraman, hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D79275
Since every AbstractAttribute so far, and for the foreseeable future,
corresponds to a single IRPosition we can simplify the class structure.
We already did this for IRAttribute but there is no reason to stop
there.
Summary:
shouldInline makes a decision based on the InlineCost of a call site, as
well as an evaluation on whether the site should be deferred. This means
it's possible for the decision to be not to inline, even for an
InlineCost that would otherwise allow it.
Both uses of shouldInline performed the exact same logic after calling
it. In addition, the decision on whether to inline or not was
communicated through two values of the Option<InlineCost> return value:
None, or an InlineCost evaluating to false.
Simplified by:
- encapsulating the decision in the return object. The bool it evaluates
to communicates unambiguously the decision. The InlineCost is also
available.
- encapsulated the common post-shouldInline code into shouldInline.
Reviewers: davidxl, echristo, eraman
Subscribers: hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D79215
Summary:
Renamed 'CS' to 'CB', and, in one case, to a more specific name to avoid
naming collision with outer scope (a maintainability/readability reason,
not correctness)
Also updated comments.
Reviewers: davidxl, dblaikie, jdoerfert
Subscribers: eraman, hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D79101
Summary:
Refactored the parameter and return type where they are too generally
typed as Instruction.
Reviewers: dblaikie, wmi, craig.topper
Subscribers: hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D79027
This method has been commented as deprecated for a while. Remove
it and replace all uses with the equivalent getCalledOperand().
I also made a few cleanups in here. For example, to removes use
of getElementType on a pointer when we could just use getFunctionType
from the call.
Differential Revision: https://reviews.llvm.org/D78882
Summary:
Missing error mangling is noticed in
https://bugs.llvm.org/show_bug.cgi?id=45636
where inconsistent profiling input caused
llvm/lld to crash as:
```
Program aborted due to an unhandled Error:
linking module flags 'ProfileSummary':
IDs have conflicting values in 'Mutex_posix.o' and 'nsBrowserApp.o'
```
The change does not change the fact that LLVM crashes
but changes error output to say what was incorrect:
```
LLVM ERROR: Function Import: link error:
linking module flags 'ProfileSummary':
IDs have conflicting values in 'Mutex_posix.o' and 'nsBrowserApp.o'
```
Actual crash has yet to be fixed.
Reviewers: lattner
Reviewed By: lattner
Subscribers: hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D78676
The CallSite and ImmutableCallSite were removed in a previous
commit. So rename the file to match the remaining class and
the name of the cpp that implements it.
The motivation is to be able to play with the option and change if it is required.
Reviewers: fedor.sergeev, apilipenko, rnk, jdoerfert
Reviewed By: fedor.sergeev
Subscribers: hiraditya, dantrushin, llvm-commits
Differential Revision: https://reviews.llvm.org/D78624
I don't believe this pass deals with vectors of pointers. I think
this getScalarType() was added during a mechanical opaque pointer
change of the interface to GetElementPtrInst::getIndexedType.
The number of different access location kinds we track is relatively
small (8 so far). With this patch we replace the DenseMap that mapped
from index (0-7) to the access set pointer with an array of access set
pointers. This reduces memory consumption.
No functional change is intended.
---
Single run of the Attributor module and then CGSCC pass (oldPM)
for SPASS/clause.c (~10k LLVM-IR loc):
Before:
```
calls to allocation functions: 472499 (215654/s)
temporary memory allocations: 77794 (35506/s)
peak heap memory consumption: 35.28MB
peak RSS (including heaptrack overhead): 125.46MB
total memory leaked: 269.04KB
```
After:
```
calls to allocation functions: 472270 (308673/s)
temporary memory allocations: 77578 (50704/s)
peak heap memory consumption: 32.70MB
peak RSS (including heaptrack overhead): 121.78MB
total memory leaked: 269.04KB
```
Difference:
```
calls to allocation functions: -229 (346/s)
temporary memory allocations: -216 (326/s)
peak heap memory consumption: -2.58MB
peak RSS (including heaptrack overhead): 0B
total memory leaked: 0B
```
---
If we have a dependence between an abstract attribute A to an abstract
attribute B such hat changes in A should trigger an update of B, we do
not need to keep the dependence around once the update was triggered. If
the dependence is still required the update will reinsert it into the
dependence map, if it is not we avoid triggering B in the future. This
replaces the "recompute interval" mechanism we used before to prune
stale dependences.
Number of required iterations is generally down, compile time for the
module pass (not really the CGSCC pass) is down quite a bit.
There is one test change which looks like an artifact in the undefined
behavior AA that needs to be looked at.
The old command line option `-attributor-disable` was too coarse grained
as we want to measure the effects of the module or cgscc pass without
the other as well.
Since `none` is the default there is no real functional change.
Reviewed By: lebedev.ri
Differential Revision: https://reviews.llvm.org/D78571
AbstractAttribute::initialize is used to initialize the deduction and
the object we do not always call it. To make sure we have the option to
initialize the object even if initialize is not called we pass the
Attributor to AbstractAttribute constructors now.
Before we kept the first applicable `ident_t*` during deduplication of
runtime calls. The problem is that "first" is dependent on the iteration
order of a DenseMap. Since the proper solution, which is to combine the
information from all `ident_t*`, should be deterministic on its own, we
will not try to make the iteration order deterministic. Instead, we will
create a fresh `ident_t*` if there is not a unique existing `ident_t*`
to pick.
We now also use the BumpPtrAllocator from the Attributor in the
InformationCache. The lifetime of objects in either is pretty much the
same and it should result in consistently good performance regardless of
the allocator.
Doing so requires to call more constructors manually but so far that
does not seem to be problematic or messy.
---
Single run of the Attributor module and then CGSCC pass (oldPM)
for SPASS/clause.c (~10k LLVM-IR loc):
Before:
```
calls to allocation functions: 615359 (368257/s)
temporary memory allocations: 83315 (49859/s)
peak heap memory consumption: 75.64MB
peak RSS (including heaptrack overhead): 163.43MB
total memory leaked: 269.04KB
```
After:
```
calls to allocation functions: 613042 (359555/s)
temporary memory allocations: 83322 (48869/s)
peak heap memory consumption: 75.64MB
peak RSS (including heaptrack overhead): 162.92MB
total memory leaked: 269.04KB
```
Difference:
```
calls to allocation functions: -2317 (-68147/s)
temporary memory allocations: 7 (205/s)
peak heap memory consumption: 2.23KB
peak RSS (including heaptrack overhead): 0B
total memory leaked: 0B
---
There are also some adjustments to use MaybeAlign in here due
to CallBase::getParamAlignment() being deprecated. It would
be cleaner if getOrEnforceKnownAlignment was migrated
to Align/MaybeAlign.
Differential Revision: https://reviews.llvm.org/D78345
Removing CallSite left us with a bunch of explicit casts from
Instruction to CallBase. This moves the casts earlier so that
function arguments and data structure types are CallBase so
we don't have to cast when we use them.
Differential Revision: https://reviews.llvm.org/D78246
CallSite will likely be removed soon, but AbstractCallSite serves a different purpose and won't be going away.
This patch switches it to internally store a CallBase* instead of a
CallSite. The only interface changes are the removal of the getCallSite
method and getCallBackUses now takes a CallBase&. These methods had only
a few callers that were easy enough to update without needing a
compatibility shim.
In the future once the other CallSites are gone, the CallSite.h
header should be renamed to AbstractCallSite.h
Differential Revision: https://reviews.llvm.org/D78322
Summary:
Changes the type of the @__typeid_.*_unique_member imports we generate
for unique return value optimization from i8 to [0 x i8]. This
prevents assuming that these imports do not alias, such as when
two unique return values occur in the same vtable.
Fixes PR45393.
Reviewers: tejohnson, pcc
Reviewed By: pcc
Subscribers: aganea, hiraditya, rnk, george.burgess.iv, dblaikie, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D77421
Since we use the fact that some uses are droppable in the Attributor we
need to handle them explicitly when we replace uses. As an example, an
assumed dead value can have live droppable users. In those we cannot
replace the value simply by an undef. Instead, we either drop the uses
(via `dropDroppableUses`) or keep them as they are. In this patch we do
both, depending on the situation. For values that are dead but not
necessarily removed we keep droppable uses around because they contain
information we might be able to use later. For values that are removed
we drop droppable uses explicitly to avoid replacement with undef.
The check if globals were accessed was not always working because two
bits are set for NO_GLOBAL_MEM. The new check works also if only on kind
of globals (internal/external) is accessed.
Running the verifier is expensive so we want to avoid it even in runs
that enable assertions. As we move closer to enabling the Attributor
this code will be executed by some buildbots but not cause overhead for
most people.
Before, we eagerly analyzed all the functions to collect information
about them, e.g. what instructions may read/write memory. This had
multiple drawbacks:
- In CGSCC-mode we can end up looking at a callee which is not in the
SCC but for which we need an initialized cache.
- We end up looking at functions that we deem dead and never need to
analyze in the first place.
- We have a implicit dependence which is easy to break.
This patch moves the function analysis into the information cache and
makes it lazy. There is no real functional change expected except due to
the first reason above.
The CallGraphUpdater allows to directly alter call site information and
we should do so. This might appease the windows buildbot that crashes
during the SCC traversal.
Summary:
Currently, the internal options -vectorize-loops, -vectorize-slp, and
-interleave-loops do not have much practical effect. This is because
they are used to initialize the corresponding flags in the pass
managers, and those flags are then unconditionally overwritten when
compiling via clang or via LTO from the linkers. The only exception was
-vectorize-loops via opt because of some special hackery there.
While vectorization could still be disabled when compiling via clang,
using -fno-[slp-]vectorize, this meant that there was no way to disable
it when compiling in LTO mode via the linkers. This only affected
ThinLTO, since for regular LTO vectorization is done during the compile
step for scalability reasons. For ThinLTO it is invoked in the LTO
backends. See also the discussion on PR45434.
This patch makes it so the internal options can actually be used to
disable these optimizations. Ultimately, the best long term solution is
to mark the loops with metadata (similar to the approach used to fix
-fno-unroll-loops in D77058), but this enables a shorter term
workaround, and actually makes these internal options useful.
I constant propagated the initial values of these internal flags into
the pass manager flags (for some reasons vectorize-loops and
interleave-loops were initialized to true, while vectorize-slp was
initialized to false). As mentioned above, they are overwritten
unconditionally so this doesn't have any real impact, and these initial
values aren't particularly meaningful.
I then changed the passes to check the internl values and return without
performing the associated optimization when false (I changed the default
of -vectorize-slp to true so the options behave similarly). I was able
to remove the hackery in opt used to get -vectorize-loops=false to work,
as well as a special option there used to disable SLP vectorization.
Finally, I changed thinlto-slp-vectorize-pm.c to:
a) Only test SLP (moved the loop vectorization checking to a new test).
b) Use code that is slp vectorized when it is enabled, and check that
instead of whether the pass is enabled.
c) Test the new behavior of -vectorize-slp.
d) Test both pass managers.
The loop vectorization (and associated interleaving) testing I moved to
a new thinlto-loop-vectorize-pm.c test, with several changes:
a) Changed the flags on the interleaving testing so that it will
actually interleave, and check that.
b) Test the new behavior of -vectorize-loops and -interleave-loops.
c) Test both pass managers.
Reviewers: fhahn, wmi
Subscribers: hiraditya, steven_wu, dexonsmith, cfe-commits, davezarzycki, llvm-commits
Tags: #clang
Differential Revision: https://reviews.llvm.org/D77989
It can be used to avoid passing the begin and end of a range.
This makes the code shorter and it is consistent with another
wrappers we already have.
Differential revision: https://reviews.llvm.org/D78016
ModuleSummaryAnalysis is the only file in libAnalysis that brings a
dependency on the CodeGen layer from libAnalysis, moving it breaks this
dependency.
Differential Revision: https://reviews.llvm.org/D77994
Summary:
Updated CallPromotionUtils and impacted sites. Parameters that are
expected to be non-null, and return values that are guranteed non-null,
were replaced with CallBase references rather than pointers.
Left FIXME in places where more changes are facilitated by CallBase, but
aren't CallSites: Instruction* parameters or return values, for example,
where the contract that they are actually CallBase values.
Reviewers: davidxl, dblaikie, wmi
Reviewed By: dblaikie
Subscribers: arsenm, jvesely, nhaehnle, eraman, hiraditya, kerbowa, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D77930
Summary:
The inline history is associated with a call site. There are two locations
we fetch inline history. In one, we fetch it together with the call
site. In the other, we initialize it under certain conditions, use it
later under same conditions (different if check), and otherwise is
uninitialized. Although currently there is no uninitialized use, the
code is more challenging to maintain correctly, than if the value were
always initialized.
Changed to the upfront initialization pattern already present in this
file.
Reviewers: davidxl, dblaikie
Subscribers: eraman, hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D77877
Summary:
Function names: camel case, lower case first letter.
Variable names: start with upper letter. For iterators that were 'i',
renamed with a descriptive name, as 'I' is 'Instruction&'.
Lambda captures simplification.
Opportunistic boolean return simplification.
Reviewers: davidxl, dblaikie
Subscribers: eraman, hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D77837
Summary:
*Almost* all uses are replaced. Left FIXMEs for the two sites that
require refactoring outside of Inliner, to scope this patch.
Subscribers: eraman, hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D77817
Attributor.cpp became quite big and we need to start provide structure.
The Attributor code is now in Attributor.cpp and the classes derived
from AbstractAttribute are in AttributorAttributes.cpp. Minor changes
were required but no intended functional changes.
We also minimized includes as part of this.
Reviewed By: baziotis
Differential Revision: https://reviews.llvm.org/D76873
dso_local leads to direct access even if the definition is not within this compilation unit (it is
still in the same linkage unit). On ELF, such a relocation (e.g. R_X86_64_PC32) referencing a
STB_GLOBAL STV_DEFAULT object can cause a linker error in a -shared link.
If the linkage is changed to available_externally, the dso_local flag should be dropped, so that no
direct access will be generated.
The current behavior is benign, because -fpic does not assume dso_local
(clang/lib/CodeGen/CodeGenModule.cpp:shouldAssumeDSOLocal).
If we do that for -fno-semantic-interposition (D73865), there will be an
R_X86_64_PC32 linker error without this patch.
Reviewed By: tejohnson
Differential Revision: https://reviews.llvm.org/D74751
Now that we have scalable vectors, there's a distinction that isn't
getting captured in the original SequentialType: some vectors don't have
a known element count, so counting the number of elements doesn't make
sense.
In some cases, there's a better way to express the commonality using
other methods. If we're dealing with GEPs, there's GEP methods; if we're
dealing with a ConstantDataSequential, we can query its element type
directly.
In the relatively few remaining cases, I just decided to write out
the type checks. We're talking about relatively few places, and I think
the abstraction doesn't really carry its weight. (See thread "[RFC]
Refactor class hierarchy of VectorType in the IR" on llvmdev.)
Differential Revision: https://reviews.llvm.org/D75661
The new and old pass managers (PassManagerBuilder.cpp and
PassBuilder.cpp) are exposed to an `extern` declaration of
`attributor-disable` option which will guard the addition of the
attributor passes to the pass pipelines.
Reviewed By: jdoerfert
Differential Revision: https://reviews.llvm.org/D76871
Query AAValueSimplify on pointers in memory accessing instructions to take
advantage of the constant propagation (or any other value simplification) of such values.
Summary:
A recent change in the instruction simplifier enables a call to a function that just returns one of its parameter to be simplified as simply loading the parameter. This exposes a bug in the inliner where double inlining may be involved which in turn may cause compiler ICE when an already-inlined callsite is reused for further inlining.
To put it simply, in the following-like C program, when the function call second(t) is inlined, its code t = third(t) will be reduced to just loading the return value of the callsite first(). This causes the inliner internal data structure to register the first() callsite for the call edge representing the third() call, therefore incurs a double inlining when both call edges are considered an inline candidate. I'm making a fix to break the inliner from reusing a callsite for new call edges.
```
void top()
{
int t = first();
second(t);
}
void second(int t)
{
t = third(t);
fourth(t);
}
void third(int t)
{
return t;
}
```
The actual failing case is much trickier than the example here and is only reproducible with the legacy inliner. The way the legacy inliner works is to process each SCC in a bottom-up order. That means in reality function first may be already inlined into top, or function third is either inlined to second or is folded into nothing. To repro the failure seen from building a large application, we need to figure out a way to confuse the inliner so that the bottom-up inlining is not fulfilled. I'm doing this by making the second call indirect so that the alias analyzer fails to figure out the right call graph edge from top to second and top can be processed before second during the bottom-up. We also need to tweak the test code so that when the inlining of top happens, the function body of second is not that optimized, by delaying the pass of function attribute deducer (i.e, which tells function third has no side effect and just returns its parameter). Since the CGSCC pass is iterative, additional calls are added to top to postpone the inlining of second to the second round right after the first function attribute deducing pass is done. I haven't been able to repro the failure with the new pass manager since the processing order of ininlined callsites is a bit different, but in theory the issue could happen there too.
Note that this fix could introduce a side effect that blocks the simplification of inlined code, specifically for a call site that can be folded to another call site. I hope this can probably be complemented by subsequent inlining or folding, as shown in the attached unit test. The ideal fix should be to separate the use of VMap. However, in reality this failing pattern shouldn't happen often. And even if it happens, there should be a good chance that the non-folded call site will be refolded by iterative inlining or subsequent simplification.
Reviewers: wenlei, davidxl, tejohnson
Reviewed By: wenlei, davidxl
Subscribers: eraman, nikic, hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D76248
There was a TODO in genericValueTraversal to provide the context
instruction and due to the lack of it users that wanted one just used
something available. Unfortunately, using a fixed instruction is wrong
in the presence of PHIs so we need to update the context instruction
properly.
Reviewed By: uenoku
Differential Revision: https://reviews.llvm.org/D76870
This cannot be triggered right now, as far as I know, but it doesn't
make sense to deduce a constant range on arguments of declarations.
Exposed during testing of AAValueSimplify extensions.
Use DL & ABI information for better alignment deduction, e.g., if a type
is accessed and the ABI specifies an alignment requirement for such an
access we can use it. This is based on a patch by @lebedev.ri and
inspired by getBaseAlign in Loads.cpp.
Depends on D76673.
Reviewed By: lebedev.ri
Differential Revision: https://reviews.llvm.org/D76674
If we have a must-tail call the callee and caller need to have matching
ABIs. Part of that is alignment which we might modify when we deduce
alignment of arguments of either. Since we would need to keep them in
sync, which is not as simple, we simply avoid deducing alignment for
arguments of the must-tail caller or callee.
Reviewed By: rnk
Differential Revision: https://reviews.llvm.org/D76673
We create a lot of AbstractAttributes and they live as long as
the Attributor does. It seems reasonable to allocate them via a
BumpPtrAllocator owned by the Attributor.
Reviewed By: baziotis
Differential Revision: https://reviews.llvm.org/D76589
Make the attributor pass aware of aligned_alloc for converting heap
allocations to stack ones.
Depends on D76971.
Differential Revision: https://reviews.llvm.org/D76974
Compbinary format uses MD5 to represent strings in name table. That gives smaller profile without the need of compression/decompression when writing/reading the profile. The patch adds the support in extbinary format. It is off by default but user can choose to enable it.
Note the feature of using MD5 in name table can bring very small chance of name conflict leading to profile mismatch. Besides, profile using the feature won't have the profile remapping support.
Differential Revision: https://reviews.llvm.org/D76255
Minor update/fixes to comments for the Attributor pass, and dyn_cast -> cast.
Signed-off-by: Uday Bondhugula <uday@polymagelabs.com>
Differential Revision: https://reviews.llvm.org/D76972
This patch integrates operand bundle llvm.assumes [0] with the
Attributor. Most IRAttributes will now look at uses of the associated
value and if there are llvm.assume operand bundle uses with the right
tag we will check if they are in the must-be-executed-context (around
the context instruction). Droppable users, which is currently only
llvm::assume, are handled special in some places now as well.
[0] http://lists.llvm.org/pipermail/llvm-dev/2019-December/137632.html
Reviewed By: uenoku
Differential Revision: https://reviews.llvm.org/D74888
PR35760 shows an example program which, when compiled with `clang -O0`
or gcc at any optimization level, prints '0'. However, llvm transforms
the program in a way that causes it to print '1'.
Fix the issue by having `AllUsesOfValueWillTrapIfNull` return false when
analyzing a load from a global which is used by an `icmp`. This special
case was untested [0] so this is just deleting dead code.
An alternative fix might be to change the GlobalStatus analysis for the
global to report "Stored" instead of "StoredOnce". However, "StoredOnce"
is appropriate when only one value other than the initializer is stored
to the global.
[0]
http://lab.llvm.org:8080/coverage/coverage-reports/coverage/Users/buildslave/jenkins/workspace/coverage/llvm-project/llvm/lib/Transforms/IPO/GlobalOpt.cpp.html#L662
Differential Revision: https://reviews.llvm.org/D76645
Validation of the found runtime library functions declarations types
(return and argument types) with the expected types.
Reviewed By: jdoerfert
Differential Revision: https://reviews.llvm.org/D76058
We special cased must-tail calls all over the place because they cannot
be modified as other calls can be. However, we already centralized the
modification API so we can centralize the handling as well. This
simplifies the code and allows to remove must-tail calls completely.
D75801 removed the last and only user of this option, so we can
drop it now. The original idea behind this was to only run expensive
transforms under -O3, but apart from the one known bits transform,
this has never really taken off. I believe nowadays the recommendation
is to put expensive transforms in AggressiveInstCombine instead,
though that isn't terribly popular either :)
Differential Revision: https://reviews.llvm.org/D76540
The existence of the class is more confusing than helpful, I think; the
commonality is mostly just "GEP is legal", which can be queried using
APIs on GetElementPtrInst.
Differential Revision: https://reviews.llvm.org/D75660
This patch add mayContainUnboundedCycle helper function which checks whether a function has any cycle which we don't know if it is bounded or not.
Loops with maximum trip count are considered bounded, any other cycle not.
It also contains some fixed tests and some added tests contain bounded and
unbounded loops and non-loop cycles.
Reviewed By: jdoerfert, uenoku, baziotis
Differential Revision: https://reviews.llvm.org/D74691
Resolution for below fixme:
(ii) Check whether the value is captured in the scope using AANoCapture.
FIXME: This is conservative though, it is better to look at CFG and
check only uses possibly executed before this callsite.
Propagates caller argument's noalias attribute to callee.
Reviewed by: jdoerfert, uenoku
Reviewers: jdoerfert, sstefan1, uenoku
Subscribers: uenoku, sstefan1, hiraditya, llvm-commits
Differential Revision: https://reviews.llvm.org/D71617
This patch introduces the propagation of known information based on path exploration.
For example,
```
int u(int c, int *p){
if(c) {
return *p;
} else {
return *p + 1;
}
}
```
An argument `p` is dereferenced whatever c's value is.
For an instruction `CtxI`, we accumulate branch instructions in the must-be-executed-context of `CtxI` and then, we take the conjunction of the successors' known state.
Reviewed By: jdoerfert
Differential Revision: https://reviews.llvm.org/D65593
It is possible that an instruction to be changed to unreachable is
in the same block with a terminator that can be constant-folded.
In this case, as of now, the instruction will be changed to
unreachable before the terminator is folded. But, then the
whole BB becomes invalidated and so when we go ahead to fold
the terminator, we trap.
Change the order of these two.
Differential Revision: https://reviews.llvm.org/D75780
If we infer the dso_local flag for -fpic, dso_local should be dropped
when we convert a GlobalVariable a declaration. dso_local causes the
generation of direct access (e.g. R_X86_64_PC32). Such relocations referencing
STB_GLOBAL STV_DEFAULT objects are not allowed in a -shared link.
Reviewed By: tejohnson
Differential Revision: https://reviews.llvm.org/D74749
Spin-off from D75407. As described there, ConstantFoldConstant()
currently returns null for non-ConstantExpr/ConstantVector inputs,
but otherwise always returns non-null, independently of whether
any folding has happened or not.
This is confusing and makes consumer code more complicated.
I would expect either that ConstantFoldConstant() returns only if
it actually folded something, or that it always returns non-null.
I'm going to the latter possibility here, which appears to be more
useful considering existing usage.
Differential Revision: https://reviews.llvm.org/D75543
The initial placement of vector-combine in the opt pipeline revealed phase ordering bugs:
https://bugs.llvm.org/show_bug.cgi?id=45015https://bugs.llvm.org/show_bug.cgi?id=42022
This patch contains a few independent changes:
1. Move the pass up in the pipeline, so it happens just after loop-vectorization.
This is only to keep vectorization passes together in the pipeline at the moment.
I don't have evidence of interaction between these yet.
2. Add an -early-cse pass after -vector-combine to clean up redundant ops. This was
partly proposed as far back as rL219644 (which is why it's effectively being moved
in the old PM code). This is important because the subsequent -instcombine doesn't
work as well without EarlyCSE. With the CSE, -instcombine is able to squash
shuffles together in 1 of the tests (because those are simple "select" shuffles).
3. Remove the -vector-combine pass that was running after SLP. We may want to do that
eventually, but I don't have a test case to support it yet.
Differential Revision: https://reviews.llvm.org/D75145
This reverts commit 80d0a137a5, and the
follow on fix in 873c0d0786. It is
causing test failures after a multi-stage clang bootstrap. See
discussion on D73242 and D75201.
Summary:
Fixes an issue that cropped up after the changes in D73242 to delay
the lowering of type tests. LTT couldn't handle any type tests with
non-string type id (which happens for local vtables, which we try to
promote during the compile step but cannot always when there are no
exported symbols).
We can simply treat the same as having an Unknown resolution, which
delays their lowering, still allowing such type tests to be used in
subsequent optimization (e.g. planned usage during ICP). The final
lowering which simply removes these handles them fine.
Beefed up an existing ThinLTO test for such unpromoted type ids so that
the internal vtable isn't removed before lower type tests, which hides
the problem.
Reviewers: evgeny777, pcc
Subscribers: inglorion, hiraditya, steven_wu, dexonsmith, aganea, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D75201
This aims to fix a missed inlining case.
If there's a virtual call in the callee on an alloca (stack allocated object) in
the caller, and the callee is inlined into the caller, the post-inline cleanup
would devirtualize the virtual call, but if the next iteration of
DevirtSCCRepeatedPass doesn't happen (under the new pass manager), which is
based on a heuristic to determine whether to reiterate, we may miss inlining the
devirtualized call.
This enables inlining in clang/test/CodeGenCXX/member-function-pointer-calls.cpp.
This is a second commit after a revert
https://reviews.llvm.org/rG4569b3a86f8a4b1b8ad28fe2321f936f9d7ffd43 and a fix
https://reviews.llvm.org/rG41e06ae7ba91.
Differential Revision: https://reviews.llvm.org/D69591
Summary:
Final patch in series to fix inlining between functions with different
nobuiltin attributes/options, which was specifically an issue in LTO.
See discussion on D61634 for background.
The prior patch in this series (D67923) enabled per-Function TLI
construction that identified the nobuiltin attributes.
Here I have allowed inlining to proceed if the callee's nobuiltins are a
subset of the caller's nobuiltins, but not in the reverse case, which
should be conservatively correct. This is controlled by a new option,
-inline-caller-superset-nobuiltin, which is enabled by default.
Reviewers: hfinkel, gchatelet, chandlerc, davidxl
Subscribers: arsenm, jvesely, nhaehnle, mehdi_amini, eraman, hiraditya, haicheng, dexonsmith, kerbowa, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D74162
DevirtSCCRepeatedPass iteration. Needs ReviewPublic
This aims to fix a missed inlining case.
If there's a virtual call in the callee on an alloca (stack allocated object) in
the caller, and the callee is inlined into the caller, the post-inline cleanup
would devirtualize the virtual call, but if the next iteration of
DevirtSCCRepeatedPass doesn't happen (under the new pass manager), which is
based on a heuristic to determine whether to reiterate, we may miss inlining the
devirtualized call.
This enables inlining in clang/test/CodeGenCXX/member-function-pointer-calls.cpp.
If we deduplicate OpenMP runtime calls we have multiple `ident_t*` that
represent information like source location. So far, we simply kept the
one used by the replacement call. However, as exposed by PR44893, that
can cause problems if we have stack allocated `ident_t` objects. While
we need to revisit the use of these as well, it is clear that we
eventually want to merge source location information in some way. With
this patch we add the infrastructure to do so but without doing the
actual merge. Instead we pick a global `ident_t` from the replaced
calls, if possible, or create a new one with an unknown location
instead.
Reviewed By: JonChesterfield
Differential Revision: https://reviews.llvm.org/D74925
This patch adds bindings to C and Go for
addCoroutinePassesToExtensionPoints, which is used to add coroutine
passes to the correct locations in PassManagerBuilder.
Differential Revision: https://reviews.llvm.org/D51642
Eric Christopher