GEP index size can be specified in the DataLayout, introduced in D42123. However, there were still places
in which getIndexSizeInBits was used interchangeably with getPointerSizeInBits. This notably caused issues
with Instcombine's visitPtrToInt; but the unit tests was incorrect, so this remained undiscovered.
Differential Revision: https://reviews.llvm.org/D68328
Patch by Joseph Faulls!
basic blocks
Originally applied in 72ce759928.
Fixed a build failure caused by incorrect use of cast instead of
dyn_cast.
This reverts commit 8b0780f795.
Summary:
Emit a value debug intrinsic (with OP_deref) when an alloca address is
passed to a function call after going through a bitcast.
This generates an FP or SP-relative location for the local variable in
the following case:
int x;
use((void *)&x;
Reviewers: aprantl, vsk, pcc
Subscribers: hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D70752
When basic blocks are killed, either due to being empty or to being an if.then
or if.else block whose complement contains identical instructions, some of the
debug intrinsics in that block are lost. This patch sinks those intrinsics
into the single successor block, setting them Undef if necessary to
prevent debug info from falling out-of-date.
Differential Revision: https://reviews.llvm.org/D70318
Summary:
Related bug: https://bugs.llvm.org/show_bug.cgi?id=40648
Static helper function rewriteDebugUsers in Local.cpp deletes dbg.value
intrinsics when it cannot move or rewrite them, or salvage the deleted
instruction's value. It should instead undef them in this case.
This patch fixes that and I've added a test which covers the failing test
case in bz40648. I've updated the unit test Local.ReplaceAllDbgUsesWith
to check for this behaviour (and fixed a typo in the test which would
cause the old test to always pass).
Reviewers: aprantl, vsk, djtodoro, probinson
Reviewed By: vsk
Subscribers: hiraditya, llvm-commits
Tags: #debug-info, #llvm
Differential Revision: https://reviews.llvm.org/D70604
Summary:
Also, replace the SmallVector with a normal C array.
Reviewers: vsk
Reviewed By: vsk
Subscribers: hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D70498
Instcombiner pass was erasing trivially dead instruction without updating dependent llvm.dbg.value.
which was not showing programmer current state of variables while debugging.
As a part of this fix I did following,
Iterate throught all the users (llvm.dbg) of a instruction which is trivially dead and set each if them undef, Before deleting the instruction.
Now user will see optimized out, when try to print those variables.
This fixes
https://bugs.llvm.org/show_bug.cgi?id=43893
This is my first fix to llvm.
Patch by kamlesh kumar!
Differential Revision: https://reviews.llvm.org/D69809
Terminators like invoke can have users outside the current basic block.
We have to replace those users with undef, before replacing the
terminator.
This fixes a crash exposed by rL373430.
Reviewers: brzycki, asbirlea, davide, spatel
Reviewed By: asbirlea
Differential Revision: https://reviews.llvm.org/D68327
llvm-svn: 373513
There are no users that pass in LazyValueInfo, so we can simplify the
function a bit.
Reviewers: brzycki, asbirlea, davide
Reviewed By: davide
Differential Revision: https://reviews.llvm.org/D68297
llvm-svn: 373488
Two small changes in llvm::removeUnreachableBlocks() to avoid unnecessary (re-)computation.
First, replace the use of count() with find(), which has better time complexity.
Second, because we have already computed the set of dead blocks, replace the second loop over all basic blocks to a loop only over the already computed dead blocks. This simplifies the loop and avoids recomputation.
Patch by Rodrigo Caetano Rocha <rcor.cs@gmail.com>
Reviewers: efriedma, spatel, fhahn, xbolva00
Reviewed By: fhahn, xbolva00
Differential Revision: https://reviews.llvm.org/D68191
llvm-svn: 373429
SROA pass processes debug info incorrecly if applied twice.
Specifically, after SROA works first time, instcombine converts dbg.declare
intrinsics into dbg.value. Inlining creates new opportunities for SROA,
so it is called again. This time it does not handle correctly previously
inserted dbg.value intrinsics.
Differential Revision: https://reviews.llvm.org/D64595
llvm-svn: 370906
When we remove instructions cached references could still be live. This
patch avoids removing invoke instructions that are replaced by calls and
instead keeps them around but in a dead block.
llvm-svn: 367933
Currently, when a GVN or CSE optimization happens,
the llvm.preserve.access.index metadata is dropped.
This caused a problem for BPF AbstructMemberOffset phase
as it relies on the metadata (debuginfo types).
This patch added proper hooks in lib/Transforms to
preserve !preserve.access.index metadata. A test
case is added to ensure metadata is preserved under CSE.
Differential Revision: https://reviews.llvm.org/D65700
llvm-svn: 367769
This is a follow up to D64971. While we need to insert the deref after
the offset, it needs to come before the remaining elements in the
original expression since the deref needs to happen before the LLVM
fragment if present.
Differential Revision: https://reviews.llvm.org/D65172
llvm-svn: 366865
[Attributor] Liveness analysis.
Liveness analysis abstract attribute used to indicate which BasicBlocks are dead and can therefore be ignored.
Right now we are only looking at noreturn calls.
Reviewers: jdoerfert, uenoku
Subscribers: hiraditya, llvm-commits
Differential Revision: https://reviews.llvm.org/D64162
llvm-svn: 366769
[Attributor] Liveness analysis.
Liveness analysis abstract attribute used to indicate which BasicBlocks are dead and can therefore be ignored.
Right now we are only looking at noreturn calls.
Reviewers: jdoerfert, uenoku
Subscribers: hiraditya, llvm-commits
Differential revision: https://reviews.llvm.org/D64162
llvm-svn: 366753
Liveness analysis abstract attribute used to indicate which BasicBlocks are dead and can therefore be ignored.
Right now we are only looking at noreturn calls.
Reviewers: jdoerfert, uenoku
Subscribers: hiraditya, llvm-commits
Differential revision: https://reviews.llvm.org/D64162
llvm-svn: 366736
While debugging code that uses SafeStack, we've noticed that LLVM
produces an invalid DWARF. Concretely, in the following example:
int main(int argc, char* argv[]) {
std::string value = "";
printf("%s\n", value.c_str());
return 0;
}
DWARF would describe the value variable as being located at:
DW_OP_breg14 R14+0, DW_OP_deref, DW_OP_constu 0x20, DW_OP_minus
The assembly to get this variable is:
leaq -32(%r14), %rbx
The order of operations in the DWARF symbols is incorrect in this case.
Specifically, the deref is incorrect; this appears to be incorrectly
re-inserted in repalceOneDbgValueForAlloca.
With this change which inserts the deref after the offset instead of
before it, LLVM produces correct DWARF:
DW_OP_breg14 R14-32
Differential Revision: https://reviews.llvm.org/D64971
llvm-svn: 366726
If the blockaddress is not destoryed, the destination block will still
be marked as having its address taken, limiting further transformations.
I think there are other places where the dead blockaddress constants are kept
around, I'll look into that as follow up.
Reviewers: craig.topper, brzycki, davide
Reviewed By: brzycki, davide
Differential Revision: https://reviews.llvm.org/D64936
llvm-svn: 366633
This reverts commit rr360902. It caused an assertion failure in
lib/IR/DebugInfoMetadata.cpp: Assertion `(OffsetInBits + SizeInBits <=
FragmentSizeInBits) && "new fragment outside of original fragment"'
failed.
PR41931.
llvm-svn: 361246
Refactor DIExpression::With* into a flag enum in order to be less
error-prone to use (as discussed on D60866).
Patch by Djordje Todorovic.
Differential Revision: https://reviews.llvm.org/D61943
llvm-svn: 361137
Fixes issue: https://bugs.llvm.org/show_bug.cgi?id=40645
Previously, LLVM had no functional way of performing casts inside of a
DIExpression(), which made salvaging cast instructions other than Noop casts
impossible. With the recent addition of DW_OP_LLVM_convert this salvaging is
now possible, and so can be used to fix the attached bug as well as any cases
where SExt instruction results are lost in the debugging metadata. This patch
introduces this fix by expanding the salvage debug info method to cover these
cases using the new operator.
Differential revision: https://reviews.llvm.org/D61184
llvm-svn: 360902
Fixes issue: https://bugs.llvm.org/show_bug.cgi?id=40645
Previously, LLVM had no functional way of performing casts inside of a
DIExpression(), which made salvaging cast instructions other than Noop
casts impossible. With the recent addition of DW_OP_LLVM_convert this
salvaging is now possible, and so can be used to fix the attached bug as
well as any cases where SExt instruction results are lost in the
debugging metadata. This patch introduces this fix by expanding the
salvage debug info method to cover these cases using the new operator.
Differential revision: https://reviews.llvm.org/D61184
llvm-svn: 360772
In certain circumstances, optimizations pick line numbers from debug
intrinsic instructions as the new location for altered instructions. This
is problematic because the line number of a debugging intrinsic is
meaningless (it doesn't produce any machine instruction), only the scope
information is valid. The result can be the line number of a variable
declaration "leaking" into real code from debugging intrinsics, making the
line table un-necessarily jumpy, and potentially different with / without
variable locations.
Fix this by using zero line numbers when promoting dbg.declare intrinsics
into dbg.values: this is safe for debug intrinsics as their line numbers
are meaningless, and reduces the scope for damage / misleading stepping
when optimizations pick locations from the wrong place.
Differential Revision: https://reviews.llvm.org/D59272
llvm-svn: 360415
Summary:
Seeing some issues for windows debug pathological cases with collectBitParts
recursion (1525 levels of recursion!)
Setting the limit to 64 as this should be sufficient - passes all lit cases
Subscribers: llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D61728
Change-Id: I7f44cdc6c1badf1c2ccbf1b0c4b6afe27ecb39a1
llvm-svn: 360347
Summary:
Preserve MemorySSA in LoopSimplify, in the old pass manager, if the analysis is available.
Do not preserve it in the new pass manager.
Update tests.
Subscribers: nemanjai, jlebar, javed.absar, Prazek, kbarton, zzheng, jsji, llvm-commits, george.burgess.iv, chandlerc
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D60833
llvm-svn: 360270
Zexts can be treated like no-op casts when it comes to assessing whether their
removal affects debug info.
Reviewer: aprantl
Differential Revision: https://reviews.llvm.org/D60641
llvm-svn: 358431
Summary:
Factor out findAllocaForValue() from ASan so that we can use it in
MSan to handle lifetime intrinsics.
Reviewers: eugenis, pcc
Subscribers: hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D60615
llvm-svn: 358380
Summary:
When inserting an `unreachable` after a noreturn call, we must ensure
that it's not a musttail call to avoid breaking the IR invariants for
musttail calls.
Reviewers: fedor.sergeev, majnemer
Reviewed By: majnemer
Subscribers: hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D60080
llvm-svn: 357485
`StoreInst::getValueOperand` is identical to `getOperand(0)`, so the call to
`getOperand(0)` can be replaced. Further, `SI->getValueOperand` is redundantly
called just a few lines down, despite its return value being stored in variable
`DV`. No functional change.
llvm-svn: 357479
Introduce a DW_OP_LLVM_convert Dwarf expression pseudo op that allows
for a convenient way to perform type conversions on the Dwarf expression
stack. As an additional bonus it paves the way for using other Dwarf
v5 ops that need to reference a base_type.
The new DW_OP_LLVM_convert is used from lib/Transforms/Utils/Local.cpp
to perform sext/zext on debug values but mainly the patch is about
preparing terrain for adding other Dwarf v5 ops that need to reference a
base_type.
For Dwarf v5 the op maps to DW_OP_convert and for earlier versions a
complex shift & mask pattern is generated to emulate sext/zext.
This is a recommit of r356442 with trivial fixes for the failing tests.
Differential Revision: https://reviews.llvm.org/D56587
llvm-svn: 356451
Introduce a DW_OP_LLVM_convert Dwarf expression pseudo op that allows
for a convenient way to perform type conversions on the Dwarf expression
stack. As an additional bonus it paves the way for using other Dwarf
v5 ops that need to reference a base_type.
The new DW_OP_LLVM_convert is used from lib/Transforms/Utils/Local.cpp
to perform sext/zext on debug values but mainly the patch is about
preparing terrain for adding other Dwarf v5 ops that need to reference a
base_type.
For Dwarf v5 the op maps to DW_OP_convert and for earlier versions a
complex shift & mask pattern is generated to emulate sext/zext.
Differential Revision: https://reviews.llvm.org/D56587
llvm-svn: 356442
Summary:
This patch separates two semantics of `applyUpdates`:
1. User provides an accurate CFG diff and the dominator tree is updated according to the difference of `the number of edge insertions` and `the number of edge deletions` to infer the status of an edge before and after the update.
2. User provides a sequence of hints. Updates mentioned in this sequence might never happened and even duplicated.
Logic changes:
Previously, removing invalid updates is considered a side-effect of deduplication and is not guaranteed to be reliable. To handle the second semantic, `applyUpdates` does validity checking before deduplication, which can cause updates that have already been applied to be submitted again. Then, different calls to `applyUpdates` might cause unintended consequences, for example,
```
DTU(Lazy) and Edge A->B exists.
1. DTU.applyUpdates({{Delete, A, B}, {Insert, A, B}}) // User expects these 2 updates result in a no-op, but {Insert, A, B} is queued
2. Remove A->B
3. DTU.applyUpdates({{Delete, A, B}}) // DTU cancels this update with {Insert, A, B} mentioned above together (Unintended)
```
But by restricting the precondition that updates of an edge need to be strictly ordered as how CFG changes were made, we can infer the initial status of this edge to resolve this issue.
Interface changes:
The second semantic of `applyUpdates` is separated to `applyUpdatesPermissive`.
These changes enable DTU(Lazy) to use the first semantic if needed, which is quite useful in `transforms/utils`.
Reviewers: kuhar, brzycki, dmgreen, grosser
Reviewed By: brzycki
Subscribers: hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D58170
llvm-svn: 354669
Salvaging a redundant load instruction into a debug expression hides a
memory read from optimisation passes. Passes that alter memory behaviour
(such as LICM promoting memory to a register) aren't aware of these debug
memory reads and leave them unaltered, making the debug variable location
point somewhere unsafe.
Teaching passes to know about these debug memory reads would be challenging
and probably incomplete. Finding dbg.value instructions that need to be fixed
would likely be computationally expensive too, as more analysis would be
required. It's better to not generate debug-memory-reads instead, alas.
Changed tests:
* DeadStoreElim: test for salvaging of intermediate operations contributing
to the dead store, instead of salvaging of the redundant load,
* GVN: remove debuginfo behaviour checks completely, this behaviour is still
covered by other tests,
* InstCombine: don't test for salvaged loads, we're removing that behaviour.
Differential Revision: https://reviews.llvm.org/D57962
llvm-svn: 353824
`CallBase` class rather than `CallSite` wrappers.
I pushed this change down through most of the statepoint infrastructure,
completely removing the use of CallSite where I could reasonably do so.
I ended up making a couple of cut-points: generic call handling
(instcombine, TLI, SDAG). As soon as it hit truly generic handling with
users outside the immediate code, I simply transitioned into or out of
a `CallSite` to make this a reasonable sized chunk.
Differential Revision: https://reviews.llvm.org/D56122
llvm-svn: 353660
This patch accompanies the RFC posted here:
http://lists.llvm.org/pipermail/llvm-dev/2018-October/127239.html
This patch adds a new CallBr IR instruction to support asm-goto
inline assembly like gcc as used by the linux kernel. This
instruction is both a call instruction and a terminator
instruction with multiple successors. Only inline assembly
usage is supported today.
This also adds a new INLINEASM_BR opcode to SelectionDAG and
MachineIR to represent an INLINEASM block that is also
considered a terminator instruction.
There will likely be more bug fixes and optimizations to follow
this, but we felt it had reached a point where we would like to
switch to an incremental development model.
Patch by Craig Topper, Alexander Ivchenko, Mikhail Dvoretckii
Differential Revision: https://reviews.llvm.org/D53765
llvm-svn: 353563
Check that when SimplifyCFG is flattening a 'br', all their debug intrinsic instructions are removed, including any dbg.label referencing a label associated with the basic blocks being removed.
Differential Revision: https://reviews.llvm.org/D57444
llvm-svn: 353511
DomTreeUpdater depends on headers from Analysis, but is in IR. This is a
layering violation since Analysis depends on IR. Relocate this code from IR
to Analysis to fix the layering violation.
llvm-svn: 353265
Some use cases are appearing where salvaging is needed that does not
correspond to an instruction being deleted -- for example an instruction
being sunk, or a Value not being available in a block being isel'd.
Enable more fine grained control over how salavging occurs by splitting
the logic into helper functions, separating things that are specific to
working on DbgVariableIntrinsics from those specific to interpreting IR
and building DIExpressions.
Differential Revision: https://reviews.llvm.org/D57696
llvm-svn: 353156
This cleans up all InvokeInst creation in LLVM to explicitly pass a
function type rather than deriving it from the pointer's element-type.
Differential Revision: https://reviews.llvm.org/D57171
llvm-svn: 352910
This cleans up all CallInst creation in LLVM to explicitly pass a
function type rather than deriving it from the pointer's element-type.
Differential Revision: https://reviews.llvm.org/D57170
llvm-svn: 352909
to reflect the new license.
We understand that people may be surprised that we're moving the header
entirely to discuss the new license. We checked this carefully with the
Foundation's lawyer and we believe this is the correct approach.
Essentially, all code in the project is now made available by the LLVM
project under our new license, so you will see that the license headers
include that license only. Some of our contributors have contributed
code under our old license, and accordingly, we have retained a copy of
our old license notice in the top-level files in each project and
repository.
llvm-svn: 351636
Instruction::isLifetimeStartOrEnd() checks whether an Instruction is an
llvm.lifetime.start or an llvm.lifetime.end intrinsic.
This was suggested as a cleanup in D55967.
Differential Revision: https://reviews.llvm.org/D56019
llvm-svn: 349964
The current llvm.mem.parallel_loop_access metadata has a problem in that
it uses LoopIDs. LoopID unfortunately is not loop identifier. It is
neither unique (there's even a regression test assigning the some LoopID
to multiple loops; can otherwise happen if passes such as LoopVersioning
make copies of entire loops) nor persistent (every time a property is
removed/added from a LoopID's MDNode, it will also receive a new LoopID;
this happens e.g. when calling Loop::setLoopAlreadyUnrolled()).
Since most loop transformation passes change the loop attributes (even
if it just to mark that a loop should not be processed again as
llvm.loop.isvectorized does, for the versioned and unversioned loop),
the parallel access information is lost for any subsequent pass.
This patch unlinks LoopIDs and parallel accesses.
llvm.mem.parallel_loop_access metadata on instruction is replaced by
llvm.access.group metadata. llvm.access.group points to a distinct
MDNode with no operands (avoiding the problem to ever need to add/remove
operands), called "access group". Alternatively, it can point to a list
of access groups. The LoopID then has an attribute
llvm.loop.parallel_accesses with all the access groups that are parallel
(no dependencies carries by this loop).
This intentionally avoid any kind of "ID". Loops that are clones/have
their attributes modifies retain the llvm.loop.parallel_accesses
attribute. Access instructions that a cloned point to the same access
group. It is not necessary for each access to have it's own "ID" MDNode,
but those memory access instructions with the same behavior can be
grouped together.
The behavior of llvm.mem.parallel_loop_access is not changed by this
patch, but should be considered deprecated.
Differential Revision: https://reviews.llvm.org/D52116
llvm-svn: 349725
When converting dbg.declares, if the described value is a [s|z]ext,
refer to the ext directly instead of referring to its operand.
This fixes a narrowing bug (the debugger got the sign of a variable
wrong, see llvm.org/PR35400).
The main reason to refer to the ext's operand was that an optimization
may remove the ext itself, leading to a dropped variable. Now that
InstCombine has been taught to use replaceAllDbgUsesWith (r336451), this
is less of a concern. Other passes can/should adopt this API as needed
to fix dropped variable bugs.
Differential Revision: https://reviews.llvm.org/D51813
llvm-svn: 349214
The `changeToCall` function did not preserve the invoke's metadata.
Currently, there is probably no metadata that depends on being applied
on a CallInst or InvokeInst. Therefore we can replace the instruction's
metadata.
This fixes http://llvm.org/PR39994
Suggested-by: Moritz Kreutzer <moritz.kreutzer@siemens.com>
Differential Revision: https://reviews.llvm.org/D55666
llvm-svn: 349170
Add methods to BasicBlock which make it easier to efficiently check
whether a block has N (or more) predecessors.
This can be more efficient than using pred_size(), which is a linear
time operation.
We might consider adding similar methods for successors. I haven't done
so in this patch because succ_size() is already O(1).
With this patch applied, I measured a 0.065% compile-time reduction in
user time for running `opt -O3` on the sqlite3 amalgamation (30 trials).
The change in mergeStoreIntoSuccessor alone saves 45 million linked list
iterations in a stage2 Release build of llc.
See llvm.org/PR39702 for a harder but more general way of achieving
similar results.
Differential Revision: https://reviews.llvm.org/D54686
llvm-svn: 347256
As K has to dominate I, IIUC I's range metadata must be a subset of
K's. After Eli's recent clarification to the LangRef, loading a value
outside of the range is undefined behavior.
Therefore if I's range contains elements outside of K's range and we would load
one such value, K would cause undefined behavior.
In cases like hoisting/sinking, we still want the most generic range
over all code paths to/from the hoist/sink point. As suggested in the
patches related to D47339, I will refactor the handling of those
scenarios and try to decouple it from this function as follow up, once
we switched to a similar handling of metadata in most of
combineMetadata.
I updated some tests checking mostly the merging of metadata to keep the
metadata of to dominating load. The most interesting one is probably test8 in
test/Transforms/JumpThreading/thread-loads.ll. It contained a comment
about the alias metadata preventing us to eliminate the branch, but it
seem like the actual problem currently is that we merge the ranges of
both loads and cannot eliminate the icmp afterwards. With this patch, we
manage to eliminate the icmp, as the range of the first load excludes 8.
Reviewers: efriedma, nlopes, davide
Reviewed By: efriedma
Differential Revision: https://reviews.llvm.org/D51629
llvm-svn: 345456
When SimplifyCFG changes the PHI node into a select instruction, the debug line records becomes ambiguous. It causes the debugger to display unreachable source lines.
Differential Revision: https://reviews.llvm.org/D53287
llvm-svn: 345250
by `getTerminator()` calls instead be declared as `Instruction`.
This is the biggest remaining chunk of the usage of `getTerminator()`
that insists on the narrow type and so is an easy batch of updates.
Several files saw more extensive updates where this would cascade to
requiring API updates within the file to use `Instruction` instead of
`TerminatorInst`. All of these were trivial in nature (pervasively using
`Instruction` instead just worked).
llvm-svn: 344502
When SimplifyCFG changes the PHI node into a select instruction, the debug line records becomes ambiguous. It causes the debugger to display unreachable source lines.
Differential Revision: https://reviews.llvm.org/D52887
llvm-svn: 344120
When SimplifyCFG changes the PHI node into a select instruction, the debug information becomes ambiguous. It causes the debugger to display wrong variable value.
Differential Revision: https://reviews.llvm.org/D51976
llvm-svn: 342527
This is a bit awkward in a handful of places where we didn't even have
an instruction and now we have to see if we can build one. But on the
whole, this seems like a win and at worst a reasonable cost for removing
`TerminatorInst`.
All of this is part of the removal of `TerminatorInst` from the
`Instruction` type hierarchy.
llvm-svn: 340701
The core get and set routines move to the `Instruction` class. These
routines are only valid to call on instructions which are terminators.
The iterator and *generic* range based access move to `CFG.h` where all
the other generic successor and predecessor access lives. While moving
the iterator here, simplify it using the iterator utilities LLVM
provides and updates coding style as much as reasonable. The APIs remain
pointer-heavy when they could better use references, and retain the odd
behavior of `operator*` and `operator->` that is common in LLVM
iterators. Adjusting this API, if desired, should be a follow-up step.
Non-generic range iteration is added for the two instructions where
there is an especially easy mechanism and where there was code
attempting to use the range accessor from a specific subclass:
`indirectbr` and `br`. In both cases, the successors are contiguous
operands and can be easily iterated via the operand list.
This is the first major patch in removing the `TerminatorInst` type from
the IR's instruction type hierarchy. This change was discussed in an RFC
here and was pretty clearly positive:
http://lists.llvm.org/pipermail/llvm-dev/2018-May/123407.html
There will be a series of much more mechanical changes following this
one to complete this move.
Differential Revision: https://reviews.llvm.org/D47467
llvm-svn: 340698
This patch makes the DoesKMove argument non-optional, to force people
to think about it. Most cases where it is false are either code hoisting
or code sinking, where we pick one instruction from a set of
equal instructions among different code paths.
Reviewers: dberlin, nlopes, efriedma, davide
Reviewed By: efriedma
Differential Revision: https://reviews.llvm.org/D47475
llvm-svn: 340606
In combineMetadata, we should be able to preserve K's nonnull metadata,
if K does not move. This condition should hold for all replacements by
NewGVN/GVN, but I added a bunch of assertions to verify that.
Fixes PR35038.
There probably are additional kinds of metadata that could be preserved
using similar reasoning. This is follow-up work.
Reviewers: dberlin, davide, efriedma, nlopes
Reviewed By: efriedma
Differential Revision: https://reviews.llvm.org/D47339
llvm-svn: 339149
This function is shared between both implementations. I am not sure if
Utils/Local.h is the best place though.
Reviewers: davide, dberlin, efriedma, xbolva00
Reviewed By: efriedma, xbolva00
Differential Revision: https://reviews.llvm.org/D47337
llvm-svn: 339138
In the past, DbgInfoIntrinsic has a strong assumption that these
intrinsics all have variables and expressions attached to them.
However, it is too strong to derive the class for other debug entities.
Now, it has problems for debug labels.
In order to make DbgInfoIntrinsic as a base class for 'debug info', I
create a class for 'variable debug info', DbgVariableIntrinsic.
DbgDeclareInst, DbgAddrIntrinsic, and DbgValueInst will be derived from it.
Differential Revision: https://reviews.llvm.org/D50220
llvm-svn: 338984
Summary:
Previously, `removeUnreachableBlocks` still returns true (which indicates the CFG is changed) even when all the unreachable blocks found is awaiting deletion in the DDT class.
This makes code pattern like
```
// Code modified from lib/Transforms/Scalar/SimplifyCFGPass.cpp
bool EverChanged = removeUnreachableBlocks(F, nullptr, DDT);
...
do {
EverChanged = someMightHappenModifications();
EverChanged |= removeUnreachableBlocks(F, nullptr, DDT);
} while (EverChanged);
```
become a dead loop.
Fix this by detecting whether a BasicBlock is already awaiting deletion.
Reviewers: kuhar, brzycki, dmgreen, grosser, davide
Reviewed By: kuhar, brzycki
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D49738
llvm-svn: 338882
Summary:
This patch is the second in a series of patches related to the [[ http://lists.llvm.org/pipermail/llvm-dev/2018-June/123883.html | RFC - A new dominator tree updater for LLVM ]].
It converts passes (e.g. adce/jump-threading) and various functions which currently accept DDT in local.cpp and BasicBlockUtils.cpp to use the new DomTreeUpdater class.
These converted functions in utils can accept DomTreeUpdater with either UpdateStrategy and can deal with both DT and PDT held by the DomTreeUpdater.
Reviewers: brzycki, kuhar, dmgreen, grosser, davide
Reviewed By: brzycki
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D48967
llvm-svn: 338814
LowerDbgDeclare inserts a dbg.value before each use of an address
described by a dbg.declare. When inserting a dbg.value before a CallInst
use, however, it fails to append DW_OP_deref to the DIExpression.
The DW_OP_deref is needed to reflect the fact that a dbg.value describes
a source variable directly (as opposed to a dbg.declare, which relies on
pointer indirection).
This patch adds in the DW_OP_deref where needed. This results in the
correct values being shown during a debug session for a program compiled
with ASan and optimizations (see https://reviews.llvm.org/D49520). Note
that ConvertDebugDeclareToDebugValue is already correct -- no changes
there were needed.
One complication is that SelectionDAG is unable to distinguish between
direct and indirect frame-index (FRAMEIX) SDDbgValues. This patch also
fixes this long-standing issue in order to not regress integration tests
relying on the incorrect assumption that all frame-index SDDbgValues are
indirect. This is a necessary fix: the newly-added DW_OP_derefs cannot
be lowered properly otherwise. Basically the fix prevents a direct
SDDbgValue with DIExpression(DW_OP_deref) from being dereferenced twice
by a debugger. There were a handful of tests relying on this incorrect
"FRAMEIX => indirect" assumption which actually had incorrect
DW_AT_locations: these are all fixed up in this patch.
Testing:
- check-llvm, and an end-to-end test using lldb to debug an optimized
program.
- Existing unit tests for DIExpression::appendToStack fully cover the
new DIExpression::append utility.
- check-debuginfo (the debug info integration tests)
Differential Revision: https://reviews.llvm.org/D49454
llvm-svn: 338069
Summary:
The optimizer is 10%+ slower with vs without debuginfo. I started checking where
the difference is coming from.
I compiled sqlite3.c with and without debug info from CTMark and compare the time difference.
I use Xcode Instrument to find where time is spent. This brings about 20ms, out of ~20s.
Reviewers: davide, hfinkel
Reviewed By: hfinkel
Subscribers: hfinkel, aprantl, JDevlieghere, llvm-commits
Differential Revision: https://reviews.llvm.org/D49337
llvm-svn: 337416
Summary:
Support for this option is needed for building Linux kernel.
This is a very frequently requested feature by kernel developers.
More details : https://lkml.org/lkml/2018/4/4/601
GCC option description for -fdelete-null-pointer-checks:
This Assume that programs cannot safely dereference null pointers,
and that no code or data element resides at address zero.
-fno-delete-null-pointer-checks is the inverse of this implying that
null pointer dereferencing is not undefined.
This feature is implemented in LLVM IR in this CL as the function attribute
"null-pointer-is-valid"="true" in IR (Under review at D47894).
The CL updates several passes that assumed null pointer dereferencing is
undefined to not optimize when the "null-pointer-is-valid"="true"
attribute is present.
Reviewers: t.p.northover, efriedma, jyknight, chandlerc, rnk, srhines, void, george.burgess.iv
Reviewed By: efriedma, george.burgess.iv
Subscribers: eraman, haicheng, george.burgess.iv, drinkcat, theraven, reames, sanjoy, xbolva00, llvm-commits
Differential Revision: https://reviews.llvm.org/D47895
llvm-svn: 336613
The replaceAllDbgUsesWith utility helps passes preserve debug info when
replacing one value with another.
This improves upon the existing insertReplacementDbgValues API by:
- Updating debug intrinsics in-place, while preventing use-before-def of
the replacement value.
- Falling back to salvageDebugInfo when a replacement can't be made.
- Moving the responsibiliy for rewriting llvm.dbg.* DIExpressions into
common utility code.
Along with the API change, this teaches replaceAllDbgUsesWith how to
create DIExpressions for three basic integer and pointer conversions:
- The no-op conversion. Applies when the values have the same width, or
have bit-for-bit compatible pointer representations.
- Truncation. Applies when the new value is wider than the old one.
- Zero/sign extension. Applies when the new value is narrower than the
old one.
Testing:
- check-llvm, check-clang, a stage2 `-g -O3` build of clang,
regression/unit testing.
- This resolves a number of mis-sized dbg.value diagnostics from
Debugify.
Differential Revision: https://reviews.llvm.org/D48676
llvm-svn: 336451
Summary:
When salvaging a dbg.declare/dbg.addr we should not add
DW_OP_stack_value to the DIExpression
(see test/Transforms/InstCombine/salvage-dbg-declare.ll).
Consider this example
%vla = alloca i32, i64 2
call void @llvm.dbg.declare(metadata i32* %vla, metadata !1, metadata !DIExpression())
Instcombine will turn it into
%vla1 = alloca [2 x i32]
%vla1.sub = getelementptr inbounds [2 x i32], [2 x i32]* %vla, i64 0, i64 0
call void @llvm.dbg.declare(metadata [2 x i32]* %vla1.sub, metadata !19, metadata !DIExpression())
If the GEP can be eliminated, then the dbg.declare will be salvaged
and we should get
%vla1 = alloca [2 x i32]
call void @llvm.dbg.declare(metadata [2 x i32]* %vla1, metadata !19, metadata !DIExpression())
The problem was that salvageDebugInfo did not recognize dbg.declare
as being indirect (%vla1 points to the value, it does not hold the
value), so we incorrectly got
call void @llvm.dbg.declare(metadata [2 x i32]* %vla1, metadata !19, metadata !DIExpression(DW_OP_stack_value))
I also made sure that llvm::salvageDebugInfo and
DIExpression::prependOpcodes do not add DW_OP_stack_value to
the DIExpression in case no new operands are added to the
DIExpression. That way we avoid to, unneccessarily, turn a
register location expression into an implicit location expression
in some situations (see test11 in test/Transforms/LICM/sinking.ll).
Reviewers: aprantl, vsk
Reviewed By: aprantl, vsk
Subscribers: JDevlieghere, llvm-commits
Differential Revision: https://reviews.llvm.org/D48837
llvm-svn: 336191
salvageDebugInfo() performs a check that allows it to exit early without
doing a DenseMap lookup. It's a bit neater and marginally more useful to
sink this early exit into the findDbg{Addr,Users,Values} helpers.
llvm-svn: 335642
Summary:
This is a follow-up to r334830 and r335031.
In the valueCoversEntireFragment check we now also handle
the situation when there is a variable length array (VLA)
involved, and the length of the array has been reduced to
a constant.
The ConvertDebugDeclareToDebugValue functions that are related
to PHI nodes and load instructions now avoid inserting dbg.value
intrinsics when the value does not, for certain, cover the
variable/fragment that should be described.
In r334830 we assumed that the value always covered the entire
var/fragment and we had assertions in the code to show that
assumption. However, those asserts failed when compiling code
with VLAs, so we removed the asserts in r335031. Now when we
know that the valueCoversEntireFragment check can fail also for
PHI/Load instructions we avoid to insert the faulty dbg.value
intrinsic in such situations. Compared to the Store instruction
scenario we simply drop the dbg.value here (as the variable does
not change its value due to PHI/Load, so an earlier dbg.value
describing the variable should still be valid).
Reviewers: aprantl, vsk, efriedma
Reviewed By: aprantl
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D48547
llvm-svn: 335580
This utility should operate on Values, not Instructions. While I'm here,
I've also made it possible to skip emitting replacement dbg.values for
certain debug users (by having RewriteExpr return nullptr).
llvm-svn: 335152
The purpose of this utility is to make it easier for optimizations to
insert replacement dbg.values for instructions they are deleting. This
is useful in situations where salvageDebugInfo is inapplicable, say,
because the new dbg.value cannot refer to an operand of the dying value.
The utility is called insertReplacementDbgValues.
It assumes that the instruction 'From' is going to be deleted, and
inserts replacement dbg.values for each debug user of 'From'. The
newly-inserted dbg.values refer to 'To' instead of 'From'. Each
replacement dbg.value has the same location and variable as the debug
user it replaces, has a DIExpression determined by the result of
'RewriteExpr' applied to an old debug user of 'From', and is placed
before 'InsertBefore'.
This should simplify future patches, like D48331.
llvm-svn: 335144
This is a fixup for r334830 causing problems in polly-aosp buildbot.
Focus in r334830 was to fix a problem seen with
ConvertDebugDeclareToDebugValue involving store instructions.
It also added some asserts to find out of similar problems
existed for the ConvertDebugDeclareToDebugValue functions
involving load and phi instructions. One of those asserts seems
to blow in the polly-aosp buildbot, so I'll revert the asserts
while debugging.
llvm-svn: 335031
This is r334704 (which was reverted in r334732) with a fix for
types like x86_fp80. We need to use getTypeAllocSizeInBits and
not getTypeStoreSizeInBits to avoid dropping debug info for
such types.
Original commit msg:
> Summary:
> Do not convert a DbgDeclare to DbgValue if the store
> instruction only refer to a fragment of the variable
> described by the DbgDeclare.
>
> Problem was seen when for example having an alloca for an
> array or struct, and there were stores to individual elements.
> In the past we inserted a DbgValue intrinsics for each store,
> just as if the store wrote the whole variable.
>
> When handling store instructions we insert a DbgValue that
> indicates that the variable is "undefined", as we do not know
> which part of the variable that is updated by the store.
>
> When ConvertDebugDeclareToDebugValue is used with a load/phi
> instruction we assert that the referenced value is large enough
> to cover the whole variable. Afaict this should be true for all
> scenarios where those methods are used on trunk. If the assert
> blows in the future I guess we could simply skip to insert a
> dbg.value instruction.
>
> In the future I think we should examine which part of the variable
> that is accessed, and add a DbgValue instrinsic with an appropriate
> DW_OP_LLVM_fragment expression.
>
> Reviewers: dblaikie, aprantl, rnk
>
> Reviewed By: aprantl
>
> Subscribers: JDevlieghere, llvm-commits
>
> Tags: #debug-info
>
> Differential Revision: https://reviews.llvm.org/D48024
llvm-svn: 334830
Summary:
Do not convert a DbgDeclare to DbgValue if the store
instruction only refer to a fragment of the variable
described by the DbgDeclare.
Problem was seen when for example having an alloca for an
array or struct, and there were stores to individual elements.
In the past we inserted a DbgValue intrinsics for each store,
just as if the store wrote the whole variable.
When handling store instructions we insert a DbgValue that
indicates that the variable is "undefined", as we do not know
which part of the variable that is updated by the store.
When ConvertDebugDeclareToDebugValue is used with a load/phi
instruction we assert that the referenced value is large enough
to cover the whole variable. Afaict this should be true for all
scenarios where those methods are used on trunk. If the assert
blows in the future I guess we could simply skip to insert a
dbg.value instruction.
In the future I think we should examine which part of the variable
that is accessed, and add a DbgValue instrinsic with an appropriate
DW_OP_LLVM_fragment expression.
Reviewers: dblaikie, aprantl, rnk
Reviewed By: aprantl
Subscribers: JDevlieghere, llvm-commits
Tags: #debug-info
Differential Revision: https://reviews.llvm.org/D48024
llvm-svn: 334704
Review feedback from r328165. Split out just the one function from the
file that's used by Analysis. (As chandlerc pointed out, the original
change only moved the header and not the implementation anyway - which
was fine for the one function that was used (since it's a
template/inlined in the header) but not in general)
llvm-svn: 333954
be both simpler and substantially more efficient.
Rather than use a hand-rolled iteration technique that isn't quite the
same as RPO, use the pre-built RPO loop body traversal utility.
Once visiting the loop body in RPO, we can assert that we visit defs
before uses reliably. When this is the case, the only need to iterate is
when simplifying a def that is used by a PHI node along a back-edge.
With this patch, the first pass over the loop body is just a complete
simplification of every instruction across the loop body. When we
encounter a use of a simplified instruction that stems from a PHI node
in the loop body that has already been visited (due to some cyclic CFG,
potentially the loop itself, or a nested loop, or unstructured control
flow), we recall that specific PHI node for the second iteration.
Nothing else needs to be preserved from iteration to iteration.
On the second and later iterations, only instructions known to have
simplified inputs are considered, each time starting from a set of PHIs
that had simplified inputs along the backedges.
Dead instructions are collected along the way, but deleted in a batch at
the end of each iteration making the iterations themselves substantially
simpler. This uses a new batch API for recursively deleting dead
instructions.
This alsa changes the routine to visit subloops. Because simplification
is fundamentally transitive, we may need to visit the entire loop body,
including subloops, to handle knock-on simplification.
I've added a basic test file that helps demonstrate that all of these
changes work. It includes both straight-forward loops with
simplifications as well as interesting PHI-structures, CFG-structures,
and a nested loop case.
Differential Revision: https://reviews.llvm.org/D47407
llvm-svn: 333461
Nicola Zaghen