Currently, the DAG Combiner only tries to convert type-legal build_vector nodes
into shuffles. This patch simply moves the logic that checks if a
build_vector has a legal value type up before we even start analyzing the
operands. This allows to early exit immediately from method
'visitBUILD_VECTOR' if the node type is known to be illegal.
No functional change intended.
llvm-svn: 218677
If there is a store followed by a store with the same value to the same location, then the store is dead/noop. It can be removed.
This problem is found in spec2006-197.parser.
For example,
stur w10, [x11, #-4]
stur w10, [x11, #-4]
Then one of the two stur instructions can be removed.
Patch by David Xu!
llvm-svn: 218569
This is purely refactoring. No functional changes intended. PowerPC is the only target
that is currently using this interface.
The ultimate goal is to allow targets other than PowerPC (certainly X86 and Aarch64) to turn this:
z = y / sqrt(x)
into:
z = y * rsqrte(x)
And:
z = y / x
into:
z = y * rcpe(x)
using whatever HW magic they can use. See http://llvm.org/bugs/show_bug.cgi?id=20900 .
There is one hook in TargetLowering to get the target-specific opcode for an estimate instruction
along with the number of refinement steps needed to make the estimate usable.
Differential Revision: http://reviews.llvm.org/D5484
llvm-svn: 218553
The InstrEmitter will skip the check of MI.hasPostISelHook()
before calling AdjustInstrPostInstrSelection() when NDEBUG
is not defined.
This was added in r140228, and I'm not sure if it is intentional or not,
but it is a likely source for bugs, because it means with
Release+Asserts builds you can forget to set the hasPostISelHook
flag on TableGen definitions and AdjustInstrPostInstrSelection() will
still be called.
llvm-svn: 218458
This is purely a plumbing patch. No functional changes intended.
The ultimate goal is to allow targets other than PowerPC (certainly X86 and Aarch64) to turn this:
z = y / sqrt(x)
into:
z = y * rsqrte(x)
using whatever HW magic they can use. See http://llvm.org/bugs/show_bug.cgi?id=20900 .
The first step is to add a target hook for RSQRTE, take the already target-independent code selfishly hoarded by PPC, and put it into DAGCombiner.
Next steps:
The code in DAGCombiner::BuildRSQRTE() should be refactored further; tests that exercise that logic need to be added.
Logic in PPCTargetLowering::BuildRSQRTE() should be hoisted into DAGCombiner.
X86 and AArch64 overrides for TargetLowering.BuildRSQRTE() should be added.
Differential Revision: http://reviews.llvm.org/D5425
llvm-svn: 218219
The heuristic used by DAGCombine to form FMAs checks that the FMUL has only one
use, but this is overly-conservative on some systems. Specifically, if the FMA
and the FADD have the same latency (and the FMA does not compete for resources
with the FMUL any more than the FADD does), there is no need for the
restriction, and furthermore, forming the FMA leaving the FMUL can still allow
for higher overall throughput and decreased critical-path length.
Here we add a new TLI callback, enableAggressiveFMAFusion, false by default, to
elide the hasOneUse check. This is enabled for PowerPC by default, as most
PowerPC systems will benefit.
Patch by Olivier Sallenave, thanks!
llvm-svn: 218120
With this optimization, we will not always insert zext for values crossing
basic blocks, but insert sext if the users of a value crossing basic block
has preference of sign predicate.
llvm-svn: 218101
Do
(shl (add x, c1), c2) -> (add (shl x, c2), c1 << c2)
This is already done for multiplies, but since multiplies
by powers of two are turned into shifts, we also need
to handle it here.
This might want checks for isLegalAddImmediate to avoid
transforming an add of a legal immediate with one that isn't.
llvm-svn: 217610
This is an extension of the change made with r215820:
http://llvm.org/viewvc/llvm-project?view=revision&revision=215820
That patch allowed combining of splatted vector FP constants that are multiplied.
This patch allows combining non-uniform vector FP constants too by relaxing the
check on the type of vector. Also, canonicalize a vector fmul in the
same way that we already do for scalars - if only one operand of the fmul is a
constant, make it operand 1. Otherwise, we miss potential folds.
This fold is also done by -instcombine, but it's possible that extra
fmuls may have been generated during lowering.
Differential Revision: http://reviews.llvm.org/D5254
llvm-svn: 217599
Previously, fast-isel would not clean up after failing to select a call
instruction, because it would have called flushLocalValueMap() which moves
the insertion point, making SavedInsertPt in selectInstruction() invalid.
Fixing this by making SavedInsertPt a member variable, and having
flushLocalValueMap() update it.
This removes some redundant code at -O0, and more importantly fixes PR20863.
Differential Revision: http://reviews.llvm.org/D5249
llvm-svn: 217401
This problem is bigger than just fsub, but this is the minimum fix to solve
fneg for PR20556 ( http://llvm.org/bugs/show_bug.cgi?id=20556 ), and we solve
zero subtraction with the same change.
llvm-svn: 217286
This is the final round of renaming. This changes tblgen to emit lower-case
function names for FastEmitInst_* and FastEmit_*, and updates all its uses
in the source code.
Reviewed by Eric
llvm-svn: 217075
Things got a little bit messy over the years and it is time for a little bit
spring cleaning.
This first commit is focused on the FastISel base class itself. It doxyfies all
comments, C++11fies the code where it makes sense, renames internal methods to
adhere to the coding standard, and clang-formats the files.
Reviewed by Eric
llvm-svn: 217060
This allows the target to disable target-independent instruction selection and
jump directly into the target-dependent instruction selection code.
This can be beneficial for targets, such as AArch64, which could emit much
better code, but never got a chance to do so, because the target-independent
instruction selector was able to find an instruction sequence.
llvm-svn: 216947
If an fmul was introduced by lowering, it wouldn't be folded
into a multiply by a constant since the earlier combine would
have replaced the fmul with the fadd.
llvm-svn: 216932
This removes static initializers from the backends which generate this data, and also makes this struct match the other Tablegen generated structs in behaviour
Reviewed by Andy Trick and Chandler C
llvm-svn: 216919
When I recommitted r208640 (in r216898) I added an exclusion for TargetConstant
offsets, as there is no guarantee that a backend can handle them on generic
ADDs (even if it generates them during address-mode matching) -- and,
specifically, applying this transformation directly with TargetConstants caused
a self-hosting failure on PPC64. Ignoring all TargetConstants, however, is less
than ideal. Instead, for non-opaque constants, we can convert them into regular
constants for use with the generated ADD (or SUB).
llvm-svn: 216908
I reverted r208640 in r209747 because r208640 broke self-hosting on PPC64. The
underlying cause of the failure is that pre-inc loads with increments
represented by ISD::TargetConstants were being transformed into ISD:::ADDs with
ISD::TargetConstant operands. PPC doesn't have a pattern for those, and so they
were selected as invalid r+r adds.
This recommits r208640, rebased and with an exclusion for ISD::TargetConstant
increments. This behavior seems correct, although in the future we might want
to ask the target to split out the indexing that uses ISD::TargetConstants.
Unfortunately, I don't yet have small test case where the relevant invalid
'add' instruction is not itself dead (and thus eliminated by
DeadMachineInstructionElim -- sometimes bugpoint is too good at removing things)
Original commit message (by Adam Nemet):
Right now the load may not get DCE'd because of the side-effect of updating
the base pointer.
This can happen if we lower a read-modify-write of an illegal larger type
(e.g. i48) such that the modification only affects one of the subparts (the
lower i32 part but not the higher i16 part). See the testcase.
In order to spot the dead load we need to revisit it when SimplifyDemandedBits
decided that the value of the load is masked off. This is the
CommitTargetLoweringOpt piece.
I checked compile time with ARM64 by sending SPEC bitcode files through llc.
No measurable change.
Fixes <rdar://problem/16031651>
llvm-svn: 216898
Summary:
If a variadic function body contains a musttail call, then we copy all
of the remaining register parameters into virtual registers in the
function prologue. We track the virtual registers through the function
body, and add them as additional registers to pass to the call. Because
this is all done in virtual registers, the register allocator usually
gives us good code. If the function does a call, however, it will have
to spill and reload all argument registers (ew).
Forwarding regparms on x86_32 is not implemented because most compilers
don't support varargs in 32-bit with regparms.
Reviewers: majnemer
Subscribers: aemerson, llvm-commits
Differential Revision: http://reviews.llvm.org/D5060
llvm-svn: 216780
The code in SelectionDAG::getMemset for some reason assumes the value passed to
memset is an i32. This breaks the generated code for targets that only have
registers smaller than 32 bits because the value might get split into multiple
registers by the calling convention. See the test for the MSP430 target included
in the patch for an example.
This patch ensures that nothing is assumed about the type of the value. Instead,
the type is taken from the selected overload of the llvm.memset intrinsic.
llvm-svn: 216716
was marked custom. The target independent DAG combine has no way to know if
the shuffles it is introducing are ones that the target could support or not.
llvm-svn: 216678
The included test case would fail, because the MI PHI node would have two
operands from the same predecessor.
This problem occurs when a switch instruction couldn't be selected. This happens
always, because there is no default switch support for FastISel to begin with.
The problem was that FastISel would first add the operand to the PHI nodes and
then fall-back to SelectionDAG, which would then in turn add the same operands
to the PHI nodes again.
This fix removes these duplicate PHI node operands by reseting the
PHINodesToUpdate to its original state before FastISel tried to select the
instruction.
This fixes <rdar://problem/18155224>.
llvm-svn: 216640
Currently instructions are folded very aggressively for AArch64 into the memory
operation, which can lead to the use of killed operands:
%vreg1<def> = ADDXri %vreg0<kill>, 2
%vreg2<def> = LDRBBui %vreg0, 2
... = ... %vreg1 ...
This usually happens when the result is also used by another non-memory
instruction in the same basic block, or any instruction in another basic block.
This fix teaches hasTrivialKill to not only check the LLVM IR that the value has
a single use, but also to check if the register that represents that value has
already been used. This can happen when the instruction with the use was folded
into another instruction (in this particular case a load instruction).
This fixes rdar://problem/18142857.
llvm-svn: 216634
Andrea Di Biagio