When switched to the MI scheduler for P9, the hardware is modeled as out of order.
However, inside the MI Scheduler algorithm, we still use the in-order scheduling model
as the MicroOpBufferSize isn't set. The MI scheduler take it as the hw cannot buffer
the op. So, only when all the available instructions issued, the pending instruction
could be scheduled. That is not true for our P9 hw in fact.
This patch is trying to enable the Out-of-Order scheduling model. The buffer size 44 is
picked from the P9 hw spec, and the perf test indicate that, its value won't hurt the cpu2017.
With this patch, there are 3 specs improved over 3% and 1 spec deg over 3%. The detail is as follows:
x264_r: +6.95%
cactuBSSN_r: +6.94%
lbm_r: +4.11%
xz_r: -3.85%
And the GEOMEAN for all the C/C++ spec in spec2017 is about 0.18% improved.
Reviewer: Nemanjai
Differential Revision: https://reviews.llvm.org/D55810
llvm-svn: 350285
PPCPreEmitPeephole pass.
PPCPreEmitPeephole will convert a BC to B when the conditional branch is
based on a constant CR by CRSET or CRUNSET. This is added in
https://reviews.llvm.org/rL343100.
When the conditional branch is known to be always taken, all branches will
be removed and a new unconditional branch will be inserted. However, when
SeenUse is false the original patch will not remove the branches, but still
insert the new unconditional branch, update the successors and create
inconsistent IR. Compiling the synthetic testcase included can show the
problem we run into.
The patch simply removes the SeenUse condition when adding branches into
InstrsToErase set.
Differential Revision: https://reviews.llvm.org/D56041
llvm-svn: 350223
Summary:
For SDAG, we pretend patchpoints aren't special at all until we emit the code for the pseudo.
Then the verifier runs and it seems like we have a use of an undefined register (the register will
be reserved later, but the verifier doesn't know that).
So this patch call setUsesTOCBasePtr before emit the code for the pseudo, so verifier can know
X2 is a reserved register.
Reviewed By: nemanjai
Differential Revision: https://reviews.llvm.org/D56148
llvm-svn: 350165
We have some unfortunate code in the back end that defines a bunch of register
sets for the Asm Parser. Every time another class is needed in the parser, we
have to add another one of those definitions with explicit lists of registers.
This NFC patch simply provides macros to use to condense that code a little bit.
Differential revision: https://reviews.llvm.org/D54433
llvm-svn: 350156
A recent patch has added custom legalization of vector conversions of
v2i16 -> v2f64. This just rounds it out for other types where the input vector
has an illegal (narrower) type than the result vector. Specifically, this will
handle the following conversions:
v2i8 -> v2f64
v4i8 -> v4f32
v4i16 -> v4f32
Differential revision: https://reviews.llvm.org/D54663
llvm-svn: 350155
The current CRBIT spill pseudo-op expansion creates a KILL instruction
that kills the CRBIT and defines the enclosing CR field. However, this
paints a false picture to the register allocator that all bits in the CR
field are killed so copies of other bits out of the field become dead and
removable.
This changes the expansion to preserve the KILL flag on the CRBIT as an
implicit use and to treat the CR field as an undef input.
Thanks to Hal Finkel for the review and Uli Weigand for implementation input.
Differential revision: https://reviews.llvm.org/D55996
llvm-svn: 350153
This is the last one in a series of patches to support better code generation for bitfield insert.
BitPermutationSelector already support ISD::ZERO_EXTEND but not TRUNCATE.
This patch adds support for ISD:TRUNCATE in BitPermutationSelector.
For example of this test case,
struct s64b {
int a:4;
int b:16;
int c:24;
};
void bitfieldinsert64b(struct s64b *p, unsigned char v) {
p->b = v;
}
the selection DAG loos like:
t14: i32,ch = load<(load 4 from %ir.0)> t0, t2, undef:i64
t18: i32 = and t14, Constant:i32<-1048561>
t4: i64,ch = CopyFromReg t0, Register:i64 %1
t22: i64 = AssertZext t4, ValueType:ch:i8
t23: i32 = truncate t22
t16: i32 = shl nuw nsw t23, Constant:i32<4>
t19: i32 = or t18, t16
t20: ch = store<(store 4 into %ir.0)> t14:1, t19, t2, undef:i64
By handling truncate in the BitPermutationSelector, we can use information from AssertZext when selecting t19 and skip the mask operation corresponding to t18.
So the generated sequences with and without this patch are
without this patch
rlwinm 5, 5, 0, 28, 11 # corresponding to t18
rlwimi 5, 4, 4, 20, 27
with this patch
rlwimi 5, 4, 4, 12, 27
Differential Revision: https://reviews.llvm.org/D49076
llvm-svn: 350118
If we are changing the MI operand from Reg to Imm, we need also handle its implicit use if have.
Differential Revision: https://reviews.llvm.org/D56078
llvm-svn: 350115
For atomic value operand which less than 4 bytes need to be masked.
And the related operation to calculate the newvalue can be done in 32 bit gprc.
So just use gprc for mask and value calculation.
Differential Revision: https://reviews.llvm.org/D56077
llvm-svn: 350113
Summary:
This patch is to fix the bug imported by rL341634.
In above submit , the the return type of ISD::ADDE is
14224: SDVTList VTs = DAG.getVTList(MVT::i64, MVT::i64),
but in fact, the second return type of ISD::ADDE should be
MVT::Glue not MVT::i64.
Reviewed By: hfinkel
Differential Revision: https://reviews.llvm.org/D55977
llvm-svn: 350061
Summary:
PowerPC has scalar selects (isel) and vector mask selects (xxsel). But PowerPC
does not have vector CR selects, PowerPC does not support scalar condition
selects on vectors.
In addition to implementing this hook, isSelectSupported() should return false
when the SelectSupportKind is ScalarCondVectorVal, so that predictable selects
are converted into branch sequences.
Reviewed By: steven.zhang, hfinkel
Differential Revision: https://reviews.llvm.org/D55754
llvm-svn: 349727
For type v4i32/v8ii16/v16i8, do following transforms:
(vselect (setcc a, b, setugt), (sub a, b), (sub b, a)) -> (vabsd a, b)
(vselect (setcc a, b, setuge), (sub a, b), (sub b, a)) -> (vabsd a, b)
(vselect (setcc a, b, setult), (sub b, a), (sub a, b)) -> (vabsd a, b)
(vselect (setcc a, b, setule), (sub b, a), (sub a, b)) -> (vabsd a, b)
Differential Revision: https://reviews.llvm.org/D55812
llvm-svn: 349599
Improve the current vec_abs support on P9, generate ISD::ABS node for vector types,
combine ABS node to VABSD node for some special cases to make use of P9 VABSD* insns,
do custom lowering to vsub(vneg later)+vmax if it has no combination opportunity.
Differential Revision: https://reviews.llvm.org/D54783
llvm-svn: 349437
We keep a few iterators into the basic block we're selecting while
performing FastISel. Usually this is fine, but occasionally code wants
to remove already-emitted instructions. When this happens we have to be
careful to update those iterators so they're not pointint at dangling
memory.
llvm-svn: 349365
There are several Pseudo in PowerPC backend.
eg:
* ISel Pseudo-instructions , which has let usesCustomInserter=1 in td
ExpandISelPseudos -> EmitInstrWithCustomInserter will deal with them.
* Post-RA pseudo instruction, which has let isPseudo = 1 in td, or Standard pseudo (SUBREG_TO_REG,COPY etc.)
ExpandPostRAPseudos -> expandPostRAPseudo will expand them
* Multi-instruction pseudo operations will expand them PPCAsmPrinter::EmitInstruction
* Pseudo instruction in CodeEmitter, which has encoding of 0.
Currently, in td files, especially PPCInstrVSX.td,
we did not distinguish Post-RA pseudo instruction and Pseudo instruction in CodeEmitter very clearly.
This patch is to
* Rename Pseudo<> class to PPCEmitTimePseudo, which means encoding of 0 in CodeEmitter
* Introduce new class PPCPostRAExpPseudo <> for previous PostRA Pseudo
* Introduce new class PPCCustomInserterPseudo <> for previous Isel Pseudo
Differential Revision: https://reviews.llvm.org/D55143
llvm-svn: 349044
Adds fatal errors for any target that does not support the Tiny or Kernel
codemodels by rejigging the getEffectiveCodeModel calls.
Differential Revision: https://reviews.llvm.org/D50141
llvm-svn: 348585
Fix assert about using an undefined physical register in machine instruction verify pass.
The reason is that register flag undef is missing when doing transformation from If Conversion Pass.
```
Bad machine code: Using an undefined physical register
- function: func_65
- basic block: %bb.0 entry (0x10024740738)
- instruction: BCLR killed $cr5lt, implicit $lr8, implicit $rm, implicit undef $x3
- operand 0: killed $cr5lt
LLVM ERROR: Found 1 machine code errors.
```
There are also other existing testcases with same issue. So I add -verify-machineinstrs option to open verifying.
Differential Revision: https://reviews.llvm.org/D55408
llvm-svn: 348566
Summary:
There are 4 instructions which have Inconsistent ImmMustBeMultipleOf in the
function PPCInstrInfo::instrHasImmForm, they are LFS, LFD, STFS, STFD.
These four instructions should set the ImmMustBeMultipleOf to 1 instead of 4.
Reviewed By: steven.zhang
Differential Revision: https://reviews.llvm.org/D54738
llvm-svn: 348109
In theory, we should let the PPC target to determine how to lower the TOC Entry for globals.
And the PPCTargetLowering requires this query to do some optimization for TOC_Entry.
Differential Revision: https://reviews.llvm.org/D54925
llvm-svn: 348108
Summary:
A signed comparison of i1 values produces the opposite result to an unsigned one if the condition code
includes less-than or greater-than. This is so because 1 is the most negative signed i1 number and the
most positive unsigned i1 number. The CR-logical operations used for such comparisons are non-commutative
so for signed comparisons vs. unsigned ones, the input operands just need to be swapped.
Reviewed By: steven.zhang
Differential Revision: https://reviews.llvm.org/D54825
llvm-svn: 347831
Summary:
Add a hook to the GCMetadataPrinter for emitting stack maps in
custom format. The hook will be called at stack map generation
time. The default stack map format is used if there is no hook.
For this to be useful a few data structures and accessors are
exposed from the StackMaps class, so the custom printer can
access the stack map data.
This patch authored by Cherry Zhang <cherryyz@google.com>.
Reviewers: thanm, apilipenko, reames
Reviewed By: reames
Subscribers: reames, apilipenko, nemanjai, javed.absar, kbarton, jsji, llvm-commits
Differential Revision: https://reviews.llvm.org/D53892
llvm-svn: 347584
This reverts commits r347532. Forget add the option
-mtriple powerpc64-unknown-linux-gnu. So other platform is error except
for PowerPC.
llvm-svn: 347534
Summary:
There are 4 instructions which have Inconsistent ImmMustBeMultipleOf in the
function PPCInstrInfo::instrHasImmForm, they are LFS, LFD, STFS, STFD.
These four instructions should set the ImmMustBeMultipleOf to 1 instead of 4.
Reviewed By: nemanjai
Differential Revision: https://reviews.llvm.org/D54738
llvm-svn: 347532
This is further cleanup for PPCMCCodeEmitter. The class had been contained
within the cpp file alone. Now it has been split up between a header file and
a cpp file which allows other classes to make use of the functions in this class
if required.
llvm-svn: 347428
We have efficient codegen on P9 for lowering bswap that involves moving
the value into a vector reg and moving it back. However, the check under
which we custom lowered it did not adequately reflect the actual requirements.
It required only that the subtarget be an implementation of ISA 3.0 since all
compliant implementations have to provide the vector instructions.
However, the kernel builds have a valid use case for -mno-altivec -mcpu=pwr9
(i.e. don't emit vector code, don't have to save vector regs for context
switch). So we should require the correct features for this lowering.
Fixes https://bugs.llvm.org/show_bug.cgi?id=39334
llvm-svn: 347376
When doing some instruction scheduling work, we noticed some missing itineraries.
Before we switch to machine scheduler, those missing itineraries might not have impact to actually scheduling,
because we can still get same latency due to default values.
With machine scheduler, however, itineraries will have impact to scheduling.
eg: NumMicroOps will default to be 0 if there is NO itineraries for specific instruction class.
And most of the instruction class with itineraries will have NumMicroOps default to 1.
This will has impact on the count of RetiredMOps, affects the Pending/Available Queue,
then causing different scheduling or suboptimal scheduling further.
This patch is for STWU/STWUX (IIC_LdStStoreUpd ) for P8.
Since there are already multiple IIC for store update, this patch also merge
IIC_LdStSTDU/IIC_LdStStoreUpd to IIC_LdStSTU
IIC_LdStSTDUX to IIC_LdStSTUX
and we add a new testcase in https://reviews.llvm.org/D54699 to show the difference.
Differential Revision: https://reviews.llvm.org/D54700
llvm-svn: 347311
Turns out that there was no check for a store that truncates down
to a single byte when combining a (store (bswap...)) into a byte-swapping
store. This patch just adds that check.
Fixes https://bugs.llvm.org/show_bug.cgi?id=39478.
llvm-svn: 347288
To make ISD::VSELECT available(legal) so long as there are altivec instruction, otherwise it's default behavior is expanding,
which is legalized at type-legalization phase. Use xxsel to match vselect if vsx is open, or use vsel.
Differential Revision: https://reviews.llvm.org/D49531
llvm-svn: 346824
Currently in llvm, CalleeSavedInfo can only assign a callee saved register to
stack frame index to be spilled in the prologue. We would like to enable
spilling gprs to vector registers. This patch adds the capability to spill to
other registers aside from just the stack. It also adds the changes for power9
to spill gprs to volatile vector registers when they are available.
This happens only for leaf functions when using the option
-ppc-enable-pe-vector-spills.
Differential Revision: https://reviews.llvm.org/D39386
llvm-svn: 346512
Summary:
This simplifies the code and moves everything to tablegen for consistency. This
also prepares the ground for adding issue counters.
Reviewers: gchatelet, john.brawn, jsji
Subscribers: nemanjai, mgorny, javed.absar, kbarton, tschuett, llvm-commits
Differential Revision: https://reviews.llvm.org/D54297
llvm-svn: 346489
Change the type in a couple of lists and sets that only store physical
registers from unsigned to MCPhysRegs. The later is only 16bits and
saves us a bit of memory.
llvm-svn: 346254
The main caller of this already has an MVT and several targets called getSimpleVT inside without checking isSimple. This makes the simpleness explicit.
llvm-svn: 346180
On Power9, we don't have patterns to select the following intrinsics:
llvm.ppc.vsx.stxvw4x.be
llvm.ppc.vsx.stxvd2x.be
This patch adds support for these.
Differential Revision: https://reviews.llvm.org/D53581
llvm-svn: 346148
This patch should not introduce any behavior changes. It consists of
mostly one of two changes:
1. Replacing fall through comments with the LLVM_FALLTHROUGH macro
2. Inserting 'break' before falling through into a case block consisting
of only 'break'.
We were already using this warning with GCC, but its warning behaves
slightly differently. In this patch, the following differences are
relevant:
1. GCC recognizes comments that say "fall through" as annotations, clang
doesn't
2. GCC doesn't warn on "case N: foo(); default: break;", clang does
3. GCC doesn't warn when the case contains a switch, but falls through
the outer case.
I will enable the warning separately in a follow-up patch so that it can
be cleanly reverted if necessary.
Reviewers: alexfh, rsmith, lattner, rtrieu, EricWF, bollu
Differential Revision: https://reviews.llvm.org/D53950
llvm-svn: 345882
optsize using masked wide loads
Under Opt for Size, the vectorizer does not vectorize interleave-groups that
have gaps at the end of the group (such as a loop that reads only the even
elements: a[2*i]) because that implies that we'll require a scalar epilogue
(which is not allowed under Opt for Size). This patch extends the support for
masked-interleave-groups (introduced by D53011 for conditional accesses) to
also cover the case of gaps in a group of loads; Targets that enable the
masked-interleave-group feature don't have to invalidate interleave-groups of
loads with gaps; they could now use masked wide-loads and shuffles (if that's
what the cost model selects).
Reviewers: Ayal, hsaito, dcaballe, fhahn
Reviewed By: Ayal
Differential Revision: https://reviews.llvm.org/D53668
llvm-svn: 345705
Currently, for this node:
vector int test(int a, int b, int c, int d) {
return (vector int) { a, b, c, d };
}
we get this on Power9:
mtvsrdd 34, 5, 3
mtvsrdd 35, 6, 4
vmrgow 2, 3, 2
and this on Power8:
mtvsrwz 0, 3
mtvsrwz 1, 5
mtvsrwz 2, 4
mtvsrwz 3, 6
xxmrghd 34, 1, 0
xxmrghd 35, 3, 2
vmrgow 2, 3, 2
This can be improved to this on LE Power9:
rldimi 3, 4, 32, 0
rldimi 5, 6, 32, 0
mtvsrdd 34, 5, 3
and this on LE Power8
rldimi 3, 4, 32, 0
rldimi 5, 6, 32, 0
mtvsrd 34, 3
mtvsrd 35, 5
xxpermdi 34, 35, 34, 0
This patch updates the TD pattern to generate the optimized sequence for both
Power8 and Power9 on LE and BE.
Differential Revision: https://reviews.llvm.org/D53494
llvm-svn: 345414
For both operands are bool, short, int, long, long long, add the following optimization.
1. 0-x == y --> x+y ==0
2. 0-x != y --> x+y != 0
Review: nemanjai
Differential Revision: https://reviews.llvm.org/D53360
llvm-svn: 345366
At present a v2i16 -> v2f64 convert is implemented by extracts to scalar,
scalar converts, and merge back into a vector. Use vector converts instead,
with the int data permuted into the proper position and extended if necessary.
Patch by RolandF.
Differential revision: https://reviews.llvm.org/D53346
llvm-svn: 345361
Add support to allow bit-casting from f128 to i128 and then
extracting 64 bits from the result.
Differential Revision: https://reviews.llvm.org/D49507
llvm-svn: 345053
The D-Form VSX loads introduced in ISA 3.0 are not direct D-Form equivalent of
the corresponding X-Forms since they only target the Altivec registers.
Namely LXSSPX can load into any of the 64 VSX registers whereas LXSSP can only
load into the upper 32 VSX registers. Similarly with the remaining affected
instructions.
There is currently no way that I can see to trigger the bug, but as we add other
ways of exploiting these instructions, there may very well be instances that do.
This is an NFC patch in practical terms since the changes it introduces can not
be triggered without an MIR test.
Differential revision: https://reviews.llvm.org/D53323
llvm-svn: 344894
by `getTerminator()` calls instead be declared as `Instruction`.
This is the biggest remaining chunk of the usage of `getTerminator()`
that insists on the narrow type and so is an easy batch of updates.
Several files saw more extensive updates where this would cascade to
requiring API updates within the file to use `Instruction` instead of
`TerminatorInst`. All of these were trivial in nature (pervasively using
`Instruction` instead just worked).
llvm-svn: 344502
interleave-group
The vectorizer currently does not attempt to create interleave-groups that
contain predicated loads/stores; predicated strided accesses can currently be
vectorized only using masked gather/scatter or scalarization. This patch makes
predicated loads/stores candidates for forming interleave-groups during the
Loop-Vectorizer's analysis, and adds the proper support for masked-interleave-
groups to the Loop-Vectorizer's planning and transformation stages. The patch
also extends the TTI API to allow querying the cost of masked interleave groups
(which each target can control); Targets that support masked vector loads/
stores may choose to enable this feature and allow vectorizing predicated
strided loads/stores using masked wide loads/stores and shuffles.
Reviewers: Ayal, hsaito, dcaballe, fhahn, javed.absar
Reviewed By: Ayal
Differential Revision: https://reviews.llvm.org/D53011
llvm-svn: 344472
The current BitPermutationSelector generates a code to build a value by tracking two types of bits: ConstZero and Variable.
ConstZero means a bit we need to mask off and Variable is a bit we copy from an input value.
This patch add third type of bits VariableKnownToBeZero caused by AssertZext node or zero-extending load node.
VariableKnownToBeZero means a bit comes from an input value, but it is known to be already zero. So we do not need to mask them.
VariableKnownToBeZero enhances flexibility to group bits, since we can avoid redundant masking for these bits.
This patch also renames "HasZero" to "NeedMask" since now we may skip masking even when we have zeros (of type VariableKnownToBeZero).
Differential Revision: https://reviews.llvm.org/D48025
llvm-svn: 344347
For ISD::SIGN_EXTEND_INREG operation of v2i16 and v2i8 types will cause assert because they are registered as custom operation.
So that the type legalization phase will enter the custom hook, which do not handle ISD::SIGN_EXTEND_INREG operation and fall throw into unreachable assert.
Patch By: wuzish (Zixuan Wu)
Differential Revision: https://reviews.llvm.org/D52449
llvm-svn: 344109
This is the PPC-specific non-controversial part of
https://reviews.llvm.org/D44548 that simply enables this combine for PPC
since PPC has these instructions.
This commit will allow the target-independent portion to be truly target
independent.
llvm-svn: 344077
There are occasionally instances where AADB rewrites registers in such a way
that a reg-reg copy becomes a self-copy. Such an instruction is obviously
redundant and can be removed. This patch does precisely that.
Note that this will not remove various nop's that we insert (which are
themselves just self-copies). The reason those are left alone is that all of
them have their own opcodes (that just encode to a self-copy).
What prompted this patch is the fact that these self-copies sometimes end up
using registers that make the instruction a priority-setting nop, thereby
having a significant effect on performance.
Differential revision: https://reviews.llvm.org/D52432
llvm-svn: 344036
Finally all targets are enabling multiple regalloc hints, so the hook to
disable this can now be removed.
NFC.
Review: Simon Pilgrim
https://reviews.llvm.org/D52316
llvm-svn: 343851
Going from XForm Load to DSForm Load requires that the immediate be 4 byte
aligned.
If we are not aligned we must leave the load as LDX (XForm).
This bug is causing a compile-time failure in the benchmark h264ref.
Differential Revision: https://reviews.llvm.org/D51988
llvm-svn: 343525
We have an unfortunate situation in our back end where we have to keep pairs of
functions synchronized. Needless to say that this is not an ideal situation as
it is very difficult to enforce. Even without bugs, it's annoying to have to do
the same thing in two places.
This patch just refactors the code so that the two pairs of those functions that
pertain to printing register operands are unified:
- stripRegisterPrefix() - this just removes the letter prefixes from registers
for the InstrPrinter and AsmPrinter. This patch provides this as a static
member of PPCRegisterInfo
- Handling of PPCII::UseVSXReg - there are 3 places where we do something
special for instructions with that flag set. Each of those places does its
own checking of this flag and implements code customization. Any changes to
how we print/encode VSX/VMX registers require modifying all 3 places. This
patch unifies this into a static function in PPCInstrInfo that returns the
register number adjusted as needed.
Differential revision: https://reviews.llvm.org/D52467
llvm-svn: 343195
This patch adds a check to optimize conditional branch (BC and BCn) based on a constant set by CRSET or CRUNSET.
Other optimizers, such as block placement, may generate such code and hence
I do this at the very end of the optimization in pre-emit peephole pass.
A conditional branch based on a constant is eliminated or converted into unconditional branch.
Also CRSET/CRUNSET is eliminated if the condition code register is not used
by instruction other than the branch to be optimized.
Differential Revision: https://reviews.llvm.org/D52345
llvm-svn: 343100
Added
__builtin_vsx_scalar_extract_expq
__builtin_vsx_scalar_insert_exp_qp
Builtins should behave the same way as in GCC.
Differential Revision: https://reviews.llvm.org/D48185
llvm-svn: 342910
gcc uses operand modifier 'x' in inline asm for VSX registers.
Without this modifier, instructions which use VSX numbering for their
operands are printed as VMX registers. This patch adds support for the
operand modifier 'x'.
Differential Revision: https://reviews.llvm.org/D52244
llvm-svn: 342882
Building a vector out of multiple loads can be converted to a load of the vector type if the loads are consecutive.
But the special condition is that the element number is 1, such as <1 x i128>. So just early exit to fix the assert.
Patch By: wuzish (Zixuan Wu)
Differential Revision: https://reviews.llvm.org/D52072
llvm-svn: 342611
- Instead of having both `SUnit::dump(ScheduleDAG*)` and
`ScheduleDAG::dumpNode(ScheduleDAG*)`, just keep the latter around.
- Add `ScheduleDAG::dump()` and avoid code duplication in several
places. Implement it for different ScheduleDAG variants.
- Add `ScheduleDAG::dumpNodeName()` in favor of the `SUnit::print()`
functions. They were only ever used for debug dumping and putting the
function into ScheduleDAG is consistent with the `dumpNode()` change.
llvm-svn: 342520
This is a follow-up to the previous patch that eliminated some of the rotates.
With this addition, we will also emit the record-form andis.
This patch increases the number of record-form rotates we eliminate by
more than 70%.
Differential revision: https://reviews.llvm.org/D44897
llvm-svn: 342478
Both ANDIo and ANDISo (and the 64-bit versions) are record-form instructions.
When optimizing compares, we handle the former in order to eliminate the compare
instruction but not the latter. This patch just adds the latter to the set of
instructions we optimize.
The reason these instructions need to be handled separately is that they are not
part of the RecFormRel map (since they don't have a non-record-form). The
missing "and-immediate-shifted" is just an oversight in the initial
implementation.
Differential revision: https://reviews.llvm.org/D51353
llvm-svn: 342472
When doing some instruction scheduling work, we noticed some missing itineraries.
Before we switch to machine scheduler, those missing itineraries might not have impact to actually scheduling,
because we can still get same latency due to default values.
With machine scheduler, however, itineraries will have impact to scheduling.
eg: NumMicroOps will default to be 0 if there is NO itineraries for specific instruction class.
And most of the instruction class with itineraries will have NumMicroOps default to 1.
This will has impact on the count of RetiredMOps, affects the Pending/Available Queue,
then causing different scheduling or suboptimal scheduling further.
Patch By: jsji (Jinsong Ji)
Differential Revision: https://reviews.llvm.org/D52040
llvm-svn: 342441
Summary:
Integer types smaller than i32 must be extended to i32 by default.
The feature "crbits" introduced at r202451 handles i1 as a special case,
but it did not extend properly.
The caller was, therefore, passing i1 stack arguments by writing 0/1 to
the first byte of the 4-byte stack object and callee was
reading the first byte for the value.
"crbits" is enabled if the optimization level is greater than 1,
which is very common in "release builds".
Such discrepancies with ABI specification also introduces
potential incompatibility with programs or libraries
built with other compilers e.g. GCC.
Fixes PR38661
Reviewers: hfinkel, cuviper
Subscribers: sylvestre.ledru, glaubitz, nagisa, nemanjai, kbarton, llvm-commits
Differential Revision: https://reviews.llvm.org/D51108
llvm-svn: 342288
Disassemblers cannot depend on main target headers. The same is true for
MCTargetDesc, but there's a lot more cleanup needed for that.
llvm-svn: 341822
When doing some instruction scheduling work, we noticed some missing itineraries.
Before we switch to machine scheduler, those missing itineraries might not have impact to actually scheduling,
because we can still get same latency due to default values.
With machine scheduler, however, itineraries will have impact to scheduling.
eg: NumMicroOps will default to be 0 if there is NO itineraries for specific instruction class.
And most of the instruction class with itineraries will have NumMicroOps default to 1.
This will has impact on the count of RetiredMOps, affects the Pending/Available Queue,
then causing different scheduling or suboptimal scheduling further.
Patch by jsji (Jinsong Ji)
Differential Revision: https://reviews.llvm.org/D51506
llvm-svn: 341293
This patch issues an error message if Darwin ABI is attempted with the PPC
backend. It also cleans up existing test cases, either converting the test to
use an alternative triple or removing the test if the coverage is no longer
needed.
Updated Tests
-------------
The majority of test cases were updated to use a different triple that does not
include the Darwin ABI. Many tests were also updated to use FileCheck, in place
of grep.
Deleted Tests
-------------
llvm/test/tools/dsymutil/PowerPC/sibling.test was originally added to test
specific functionality of dsymutil using an object file created with an old
version of llvm-gcc for a Powerbook G4. After a discussion with @JDevlieghere he
suggested removing the test.
llvm/test/CodeGen/PowerPC/combine_loads_from_build_pair.ll was converted from a
PPC test to a SystemZ test, as the behavior is also reproducible there.
All other tests that were deleted were specific to the darwin/ppc ABI and no
longer necessary.
Phabricator Review: https://reviews.llvm.org/D50988
llvm-svn: 340795
Loosens an assert in getMemRIX16Encoding that restricts DQ-form instructions to
using an immediate, so that we can assemble instructions like lxv/stxv where the
offset is an expression.
Differential Revision: https://reviews.llvm.org/D51122
llvm-svn: 340761
This commit has caused failures in some internal benchmarks. Temporarily
reverting this patch until the issue can be diagnosed and fixed.
llvm-svn: 340740
The internal benchmark failure reported by Google was due to a missing
check for the result type for the sign-extend and shift DAG. This commit
adds the check and re-commits the patch.
llvm-svn: 340734
This patch will address using the xscpsgndp instruction to copy floating point
scalar registers instead of the xxlor (specifically XXLORf) instruction that is
currently used. Additionally, this patch of utilizing xscpsgndp will apply to
P9, while pre-P9 will still use xxlor.
Patch by amyk
Differential Revision: https://reviews.llvm.org/D50004
llvm-svn: 340643
If the arch is P8, we will select XFLOAD to load the floating point, and then, expand it to vsx and non-vsx X-form instruction post RA. This patch is trying to convert the X-form to D-form if it meets the requirement that one operand of the x-form inst is the special Zero register, and another operand fed by add inst. i.e.
y = add imm, reg
LFDX. 0, y
-->
LFD imm(reg)
Reviewers: Nemanjai
Differential Revision: https://reviews.llvm.org/D49007
llvm-svn: 340149
This patch addresses:
- Implementation within PPCISelLowering.cpp to check if we should use direct
load into vector instructions (such as lxsd/lfd ) when the scalar_to_vector
function is used; which will allow us to catch as many cases of the
scalar_to_vector uses as possible to translate the ld->mtvsrd sequence into
lxsd.
- Test cases to exhibit the behaviour of emitting lxsd/lfd.
Patch by amyk
Differential revision: https://reviews.llvm.org/D49698
llvm-svn: 340037
Add a DAG combine for the PowerPC code generator to generate the Power9 extswsli
extend sign and shift immediate instruction.
Patch by RolandF.
Differential revision: https://reviews.llvm.org/D49879
llvm-svn: 340016
a generically extensible collection of extra info attached to
a `MachineInstr`.
The primary change here is cleaning up the APIs used for setting and
manipulating the `MachineMemOperand` pointer arrays so chat we can
change how they are allocated.
Then we introduce an extra info object that using the trailing object
pattern to attach some number of MMOs but also other extra info. The
design of this is specifically so that this extra info has a fixed
necessary cost (the header tracking what extra info is included) and
everything else can be tail allocated. This pattern works especially
well with a `BumpPtrAllocator` which we use here.
I've also added the basic scaffolding for putting interesting pointers
into this, namely pre- and post-instruction symbols. These aren't used
anywhere yet, they're just there to ensure I've actually gotten the data
structure types correct. I'll flesh out support for these in
a subsequent patch (MIR dumping, parsing, the works).
Finally, I've included an optimization where we store any single pointer
inline in the `MachineInstr` to avoid the allocation overhead. This is
expected to be the overwhelmingly most common case and so should avoid
any memory usage growth due to slightly less clever / dense allocation
when dealing with >1 MMO. This did require several ergonomic
improvements to the `PointerSumType` to reasonably support the various
usage models.
This also has a side effect of freeing up 8 bits within the
`MachineInstr` which could be repurposed for something else.
The suggested direction here came largely from Hal Finkel. I hope it was
worth it. ;] It does hopefully clear a path for subsequent extensions
w/o nearly as much leg work. Lots of thanks to Reid and Justin for
careful reviews and ideas about how to do all of this.
Differential Revision: https://reviews.llvm.org/D50701
llvm-svn: 339940
To make ISD::VSELECT available(legal) so long as there are altivec instruction,
otherwise it's default behavior is expanding.
Use xxsel to match vselect if vsx is open, or use vsel.
In order to do not write many patterns in td file, promote (for vector it's
bitcast) all other type into v4i32 and only pattern match vselect of v4i32 into
vsel or xxsel.
Patch by wuzish
Differential revision: https://reviews.llvm.org/D49531
llvm-svn: 339779
When trying to combine a DAG that builds a vector out of sign-extensions of
vector extracts, the code assumes legal input types. Due to that, we have to
disable this combine prior to legalization.
In some cases, the DAG will look slightly different after legalization so
account for that in the matching code.
This is a fix for https://bugs.llvm.org/show_bug.cgi?id=38087
Differential Revision: https://reviews.llvm.org/D49080
llvm-svn: 339769
`MachineMemOperand` pointers attached to `MachineSDNodes` and instead
have the `SelectionDAG` fully manage the memory for this array.
Prior to this change, the memory management was deeply confusing here --
The way the MI was built relied on the `SelectionDAG` allocating memory
for these arrays of pointers using the `MachineFunction`'s allocator so
that the raw pointer to the array could be blindly copied into an
eventual `MachineInstr`. This creates a hard coupling between how
`MachineInstr`s allocate their array of `MachineMemOperand` pointers and
how the `MachineSDNode` does.
This change is motivated in large part by a change I am making to how
`MachineFunction` allocates these pointers, but it seems like a layering
improvement as well.
This would run the risk of increasing allocations overall, but I've
implemented an optimization that should avoid that by storing a single
`MachineMemOperand` pointer directly instead of allocating anything.
This is expected to be a net win because the vast majority of uses of
these only need a single pointer.
As a side-effect, this makes the API for updating a `MachineSDNode` and
a `MachineInstr` reasonably different which seems nice to avoid
unexpected coupling of these two layers. We can map between them, but we
shouldn't be *surprised* at where that occurs. =]
Differential Revision: https://reviews.llvm.org/D50680
llvm-svn: 339740
This patch aims to improve the codegen for vector loads involving the
scalar_to_vector (load X) sequence. Initially, ld->mv instructions were used
for scalar_to_vector (load X), so this patch allows scalar_to_vector (load X)
to utilize:
LXSD and LXSDX for i64 and f64
LXSIWAX for i32 (sign extension to i64)
LXSIWZX for i32 and f64
Committing on behalf of Amy Kwan.
Differential Revision: https://reviews.llvm.org/D48950
llvm-svn: 339260
Adding the FP_ROUND nodes when combining FP_TO_[SU]INT of elements
feeding a BUILD_VECTOR into an FP_TO_[SU]INT of the built vector
loses precision. This patch removes the code that adds these nodes
to true f64 operands. It also adds patterns required to ensure
the code is still vectorized rather than converting individual
elements and inserting into a vector.
Fixes https://bugs.llvm.org/show_bug.cgi?id=38342
Differential Revision: https://reviews.llvm.org/D50121
llvm-svn: 338658
The vector contains the SDNodes that these functions create. The number of nodes is always a small number so we should use SmallVector to avoid a heap allocation.
llvm-svn: 338329
As we already return true from needsAggressiveScheduling() for the most recent
hardware it would be cleaner to just return true for all PowerPC hardware.
Differential Revision: https://reviews.llvm.org/D48663
llvm-svn: 337488
* Delete a no-longer-used override, and mark the other
getRegisterTypeForCallingConv() as override.
* SPE only supports i32, not i64, as the internal type, so simply remove
the type check, so that DestReg and Opc are provably always set.
GCC 6.4 did not warn about either of the above.
llvm-svn: 337350
Summary:
The Signal Processing Engine (SPE) is found on NXP/Freescale e500v1,
e500v2, and several e200 cores. This adds support targeting the e500v2,
as this is more common than the e500v1, and is in SoCs still on the
market.
This patch is very intrusive because the SPE is binary incompatible with
the traditional FPU. After discussing with others, the cleanest
solution was to make both SPE and FPU features on top of a base PowerPC
subset, so all FPU instructions are now wrapped with HasFPU predicates.
Supported by this are:
* Code generation following the SPE ABI at the LLVM IR level (calling
conventions)
* Single- and Double-precision math at the level supported by the APU.
Still to do:
* Vector operations
* SPE intrinsics
As this changes the Callee-saved register list order, one test, which
tests the precise generated code, was updated to account for the new
register order.
Reviewed by: nemanjai
Differential Revision: https://reviews.llvm.org/D44830
llvm-svn: 337347
This is the lead-up to having SPE codegen. Add the rest of the
instructions, along with MC tests.
Differential Revision: https://reviews.llvm.org/D44829
llvm-svn: 337346
Revision r322373 fixed a bug in how we materialize constants when the CR-field
needs to be set.
However the fix is overly conservative. It will only do the transform if
AND-ing the input with the new constant produces the same new constant.
This is of course correct, but not necessarily required.
If there are no futher uses of the constant, the constant can be changed.
If there are no uses of the GPR result, the final result of the materialization
isn't important other than it needs to compare to zero correctly (lt, gt, eq).
Differential revision: https://reviews.llvm.org/D42109
llvm-svn: 337008
Added __float128 support for a number of rounding operations:
trunc
rint
nearbyint
round
floor
ceil
Differential Revision: https://reviews.llvm.org/D48415
llvm-svn: 336601
Power 9 does not have a hardware instruction for frem but we can call fmodf128.
Differential Revision: https://reviews.llvm.org/D48552
llvm-svn: 336406
Map the following instructions to the proper float128 lib calls:
pow[i], exp[2], log[2|10], sin, cos, fmin, fmax
Differential Revision: https://reviews.llvm.org/D48544
llvm-svn: 336361
Optimize code sequences for integer conversion to fp128 when the integer is a result of:
* float->int
* float->long
* double->int
* double->long
Differential Revision: https://reviews.llvm.org/D48429
llvm-svn: 336316
Non-homogenous aggregates are passed in consecutive GPRs, in GPRs and in memory,
or in memory. This patch ensures that float128 members of non-homogenous
aggregates are passed via VSX registers.
This is done via custom lowering a bitcast of a build_pari(i64,i64) to float128
to a new PPCISD node, BUILD_FP128.
Differential Revision: https://reviews.llvm.org/D48308
llvm-svn: 336310
Legalize and emit code for quad-precision floating point operation conversion of
single-precision value to quad-precision.
Differential Revision: https://reviews.llvm.org/D47569
llvm-svn: 336307
This patch enable parameter passing and return by value for float128 types.
Passing aggregate/union which contain float128 members will be submitted in
subsequent patches.
Differential Revision: https://reviews.llvm.org/D47552
llvm-svn: 336306
Legalize and emit code for round & convert float128 to double precision and
single precision.
Differential Revision: https://reviews.llvm.org/D46997
llvm-svn: 336299
We want to run the Machine Scheduler instead of the List Scheduler after RA.
Checked with a performance run on a Power 9 machine with SPEC 2006 and while
some benchmarks improved and others degraded the geomean was slightly improved
with the Machine Scheduler.
Differential Revision: https://reviews.llvm.org/D45265
llvm-svn: 336295
For the below case, pre-inc prep think it's a good candidate to use pre-inc for the bucket, but 64bit integer load/store update (pre-inc) instruction on Power requires the displacement field should be DS-form (4's multiple). Since it can't satisfy the constraint, we have to do some fix ups later. As below, the original load/stores could be well-form, it makes things worse.
unsigned long long result = 0;
unsigned long long foo(char *p, unsigned long long n) {
for (unsigned long long i = 0; i < n; i++) {
unsigned long long x1 = *(unsigned long long *)(p - 50000 + i);
unsigned long long x2 = *(unsigned long long *)(p - 61024 + i);
unsigned long long x3 = *(unsigned long long *)(p - 62048 + i);
unsigned long long x4 = *(unsigned long long *)(p - 64096 + i);
result *= x1 * x2 * x3 * x4;
}
return result;
}
Patch by jedilyn(Kewen Lin).
Differential Revision: https://reviews.llvm.org/D48813
--This line, and those below, will be ignored--
M lib/Target/PowerPC/PPCLoopPreIncPrep.cpp
A test/CodeGen/PowerPC/preincprep-i64-check.ll
llvm-svn: 336074
and expand it post RA basing on the register pressure. However, we miss to do the add-imm peephole for these pseudo instruction.
Differential Revision: https://reviews.llvm.org/D47568
Reviewed By: Nemanjai
llvm-svn: 335024
Enables using the high and high-adjusted symbol modifiers on thread local
storage modifers in powerpc assembly. Needed to be able to support 64 bit
thread-pointer and dynamic-thread-pointer access sequences.
Differential Revision: https://reviews.llvm.org/D47754
llvm-svn: 334856
Add support for the "@high" and "@higha" symbol modifiers in powerpc64 assembly.
The modifiers represent accessing the segment consiting of bits 16-31 of a
64-bit address/offset.
Differential Revision: https://reviews.llvm.org/D47729
llvm-svn: 334855
This patch fixes a failure in lnt tests with -verify-machineinstrs option.
When VSX Swap Removal pass swaps two register operands, it did not maintain kill flags associated with operands. This patch swaps flags as well as register number to avoid inconsistent kill flags information.
llvm-svn: 334579
BitPermutationSelector sets Repl32 flag for bit groups which can be (potentially) benefit from 32-bit rotate-and-mask instructions with bit replication, i.e. rlwinm/rlwimi copies lower 32 bits into upper 32 bits on 64-bit PowerPC before rotation.
However, enforcing 32-bit instruction sometimes results in redundant generated code.
For example, the following simple code is compiled into rotldi + rlwimi while it can be compiled into only rldimi instruction if Repl32 flag is not set on the bit group for (a & 0xFFFFFFFF).
uint64_t func(uint64_t a, uint64_t b) {
return (a & 0xFFFFFFFF) | (b << 32) ;
}
To avoid such problem, this patch checks the potential benefit of Repl32 flag before setting it. If a bit group does not require rotation (i.e. RLAmt == 0) and won't be merged into another group, we do not benefit from Repl32 flag on this group.
Differential Revision: https://reviews.llvm.org/D47867
llvm-svn: 334195
On targets like Arm some relaxations may only be performed when certain
architectural features are available. As functions can be compiled with
differing levels of architectural support we must make a judgement on
whether we can relax based on the MCSubtargetInfo for the function. This
change passes through the MCSubtargetInfo for the function to
fixupNeedsRelaxation so that the decision on whether to relax can be made
per function. In this patch, only the ARM backend makes use of this
information. We must also pass the MCSubtargetInfo to applyFixup because
some fixups skip error checking on the assumption that relaxation has
occurred, to prevent code-generation errors applyFixup must see the same
MCSubtargetInfo as fixupNeedsRelaxation.
Differential Revision: https://reviews.llvm.org/D44928
llvm-svn: 334078
BitPermutationSelector builds the output value by repeating rotate-and-mask instructions with input registers.
Here, we may avoid one rotate instruction if we start building from an input register that does not require rotation.
For example of the test case bitfieldinsert.ll, it first rotates left r4 by 8 bits and then inserts some bits from r5 without rotation.
This can be executed by one rlwimi instruction, which rotates r4 by 8 bits and inserts its bits into r5.
This patch adds a check for rotation amounts in the comparator used in sorting to process the input without rotation first.
Differential Revision: https://reviews.llvm.org/D47765
llvm-svn: 334011
Review feedback from r328165. Split out just the one function from the
file that's used by Analysis. (As chandlerc pointed out, the original
change only moved the header and not the implementation anyway - which
was fine for the one function that was used (since it's a
template/inlined in the header) but not in general)
llvm-svn: 333954
Summary:
They've been deprecated in favor of UADDO/ADDCARRY or USUBO/SUBCARRY for a while.
Target that uses these opcodes are changed in order to ensure their behavior doesn't change.
Reviewers: efriedma, craig.topper, dblaikie, bkramer
Subscribers: jholewinski, arsenm, jyknight, sdardis, nemanjai, nhaehnle, kbarton, fedor.sergeev, asb, rbar, johnrusso, simoncook, jordy.potman.lists, apazos, sabuasal, niosHD, jrtc27, zzheng, edward-jones, mgrang, atanasyan, llvm-commits
Differential Revision: https://reviews.llvm.org/D47422
llvm-svn: 333748
Instruction selection can insert nodes into the underlying list after the root
node so iterating will thereby miss it. We should NOT assume that, the root node
is the last element in the DAG nodelist.
Patch by: steven.zhang (Qing Shan Zhang)
Differential Revision: https://reviews.llvm.org/D47437
llvm-svn: 333415
Implemente patterns to extract HWord and Byte vector elements and convert to
quad-precision.
Differential Revision: https://reviews.llvm.org/D46774
llvm-svn: 333377
The X-form TLS load/store instructions added for optimizing the initial-exec
sequence in https://reviews.llvm.org/rL327635 fail to assemble. llvm-mc fails
with the error: invalid operand for instruction. This patch adds these
instructions into a block with isAsmParserOnly, similar to how ADD8TLS_ is
currently handled.
Differential Revision: https://reviews.llvm.org/D47382
llvm-svn: 333374
The match pattern in the definition of LXSDX is xoaddr, so the Pseudo
instruction XFLOADf64 never gets selected. XFLOADf64 expands to LXSDX/LFDX post
RA based on the register pressure. To avoid ambiguity, we need to remove the
select pattern for LXSDX, same as what was done for LXSD. STXSDX also have
the same issue.
Patch by Qing Shan Zhang (steven.zhang).
Differential Revision: https://reviews.llvm.org/D47178
llvm-svn: 333150
Implemente patterns to extract [Un]signed Word vector element and convert to
quad-precision.
Differential Revision: https://reviews.llvm.org/D46536
llvm-svn: 333115
Implemente patterns to extract [Un]signed DWord vector element and convert to
quad-precision.
Differential Revision: https://reviews.llvm.org/D46333
llvm-svn: 333112
With this we gain a little flexibility in how the generic object
writer is created.
Part of PR37466.
Differential Revision: https://reviews.llvm.org/D47045
llvm-svn: 332868
To make this work I needed to add an endianness field to MCAsmBackend
so that writeNopData() implementations know which endianness to use.
Part of PR37466.
Differential Revision: https://reviews.llvm.org/D47035
llvm-svn: 332857
Provide some free functions to reduce verbosity of endian-writing
a single value, and replace the endianness template parameter with
a field.
Part of PR37466.
Differential Revision: https://reviews.llvm.org/D47032
llvm-svn: 332757
xsrqpi is currently using Z23Form_1.
The instruction format is xsrqpi R,VRT,VRB,RMC.
Rathar than bits 11-15 being used for FRA, it should have
bits 11-14 reserved and bit 15 for R. This patch adds a new
class Z23Form_4 to fix the instruction format.
Differential Revision: https://reviews.llvm.org/D46761
llvm-svn: 332253
The DEBUG() macro is very generic so it might clash with other projects.
The renaming was done as follows:
- git grep -l 'DEBUG' | xargs sed -i 's/\bDEBUG\s\?(/LLVM_DEBUG(/g'
- git diff -U0 master | ../clang/tools/clang-format/clang-format-diff.py -i -p1 -style LLVM
- Manual change to APInt
- Manually chage DOCS as regex doesn't match it.
In the transition period the DEBUG() macro is still present and aliased
to the LLVM_DEBUG() one.
Differential Revision: https://reviews.llvm.org/D43624
llvm-svn: 332240
This commit adds a wrapper for std::distance() which works with ranges.
As it would be a common case to write `distance(predecessors(BB))`, this
also introduces `pred_size()` and `succ_size()` helpers to make that
easier to write.
Differential Revision: https://reviews.llvm.org/D46668
llvm-svn: 332057
Because we create a new kind of debug instruction, DBG_LABEL, we need to
check all passes which use isDebugValue() to check MachineInstr is debug
instruction or not. When expelling debug instructions, we should expel
both DBG_VALUE and DBG_LABEL. So, I create a new function,
isDebugInstr(), in MachineInstr to check whether the MachineInstr is
debug instruction or not.
This patch has no new test case. I have run regression test and there is
no difference in regression test.
Differential Revision: https://reviews.llvm.org/D45342
Patch by Hsiangkai Wang.
llvm-svn: 331844
Legalize and emit code for truncate and convert float128 to (un)signed short
and (un)signed char.
Differential Revision: https://reviews.llvm.org/D46194
llvm-svn: 331797
Existing DAG combine only handles conversions for FP_TO_SINT:
"{f32, f64} x { i32, i16 }"
This patch simplifies the code to handle:
"{ FP_TO_SINT, FP_TO_UINT } x { f64, f32 } x { i64, i32, i16, i8 }"
Differential Revision: https://reviews.llvm.org/D46102
llvm-svn: 331778
Sinking the and closer to a compare against zero is beneficial on PPC as it
allows us to emit record-form instructions. In the future, we may expand this
to a larger set of operations that feed compares against zero since PPC has
lots of record-form instructions.
Differential revision: https://reviews.llvm.org/D46060
llvm-svn: 331416
The CTR loops pass will insert the decrementing branch instruction in an exiting
block for the loop being transformed. However if that block is part of another
loop as well (whether a nested loop or with irreducible CFG), it is not valid
to use that exiting block. In fact, if the loop hass irreducible CFG, we don't
bother analyzing it and we just bail on the transformation. In practice, this
doesn't lead to a noticeable reduction in the number of loops transformed by
this pass.
Fixes https://bugs.llvm.org/show_bug.cgi?id=37229
Differential Revision: https://reviews.llvm.org/D46162
llvm-svn: 331410
We've been running doxygen with the autobrief option for a couple of
years now. This makes the \brief markers into our comments
redundant. Since they are a visual distraction and we don't want to
encourage more \brief markers in new code either, this patch removes
them all.
Patch produced by
for i in $(git grep -l '\\brief'); do perl -pi -e 's/\\brief //g' $i & done
Differential Revision: https://reviews.llvm.org/D46290
llvm-svn: 331272
See r331124 for how I made a list of files missing the include.
I then ran this Python script:
for f in open('filelist.txt'):
f = f.strip()
fl = open(f).readlines()
found = False
for i in xrange(len(fl)):
p = '#include "llvm/'
if not fl[i].startswith(p):
continue
if fl[i][len(p):] > 'Config':
fl.insert(i, '#include "llvm/Config/llvm-config.h"\n')
found = True
break
if not found:
print 'not found', f
else:
open(f, 'w').write(''.join(fl))
and then looked through everything with `svn diff | diffstat -l | xargs -n 1000 gvim -p`
and tried to fix include ordering and whatnot.
No intended behavior change.
llvm-svn: 331184
Vectorized loops with abs() returns incorrect results on POWER9. This patch fixes it.
For example the following code returns negative result if input values are negative though it sums up the absolute value of the inputs.
int vpx_satd_c(const int16_t *coeff, int length) {
int satd = 0;
for (int i = 0; i < length; ++i) satd += abs(coeff[i]);
return satd;
}
This problem causes test failures for libvpx.
For vector absolute and vector absolute difference on POWER9, LLVM generates VABSDUW (Vector Absolute Difference Unsigned Word) instruction or variants.
Since these instructions are for unsigned integers, we need adjustment for signed integers.
For abs(sub(a, b)), we generate VABSDUW(a+0x80000000, b+0x80000000). Otherwise, abs(sub(-1, 0)) returns 0xFFFFFFFF(=-1) instead of 1. For abs(a), we generate VABSDUW(a+0x80000000, 0x80000000).
Differential Revision: https://reviews.llvm.org/D45522
llvm-svn: 330497
Legalize and emit code for converting unsigned HWord/Char to QP:
xscvsdqp
xscvudqp
Only covering patterns for unsigned forms cause we don't have part-word
sign-extending integer loads into VSX registers.
Differential Revision: https://reviews.llvm.org/D45494
llvm-svn: 330278
Legalize and emit code for converting (Un)Signed Word to quad-precision via:
xscvsdqp
xscvudqp
Differential Revision: https://reviews.llvm.org/D45389
llvm-svn: 330273
Move veriication check for legal conversions to f128 into LowerINT_TO_FP()
and fix some indentations to match other sections of the code for readability.
llvm-svn: 330138
The Power 9 scheduler model should now include the TLS instructions.
We can now, once again, mark the model as complete.
From now on, if instructions are added to Power 9 but are not
added to the model the build should produce an error. Hopefully
that will alert the developer who is adding new instructions
that they should also be added to the scheulder model.
llvm-svn: 330060
This patch fixes https://bugs.llvm.org/show_bug.cgi?id=37039
The condition only covers one of the two 64-bit rotate instructions. This just
adds the second (RLDICLo).
Patch by Josh Stone.
llvm-svn: 329852
Summary:
r327219 added wrappers to std::sort which randomly shuffle the container before sorting.
This will help in uncovering non-determinism caused due to undefined sorting
order of objects having the same key.
To make use of that infrastructure we need to invoke llvm::sort instead of std::sort.
Note: This patch is one of a series of patches to replace *all* std::sort to llvm::sort.
Refer the comments section in D44363 for a list of all the required patches.
Reviewers: hfinkel, RKSimon
Reviewed By: RKSimon
Subscribers: nemanjai, kbarton, llvm-commits
Differential Revision: https://reviews.llvm.org/D44870
llvm-svn: 329535
VSX D-form load/store instructions of POWER9 require the offset be a multiple of 16 and a helper`isOffsetMultipleOf` is used to check this.
So far, the helper handles FrameIndex + offset case, but not handling FrameIndex without offset case. Due to this, we are missing opportunities to exploit D-form instructions when accessing an object or array allocated on stack.
For example, x-form store (stxvx) is used for int a[4] = {0}; instead of d-form store (stxv). For larger arrays, D-form instruction is not used when accessing the first 16-byte. Using D-form instructions reduces register pressure as well as instructions.
Differential Revision: https://reviews.llvm.org/D45079
llvm-svn: 329377
For schedule models that don't use itineraries, checkCompleteness still checks that an instruction has a matching itinerary instead of skipping and going straight to matching the InstRWs. That doesn't seem to match what happens in TargetSchedule.cpp
This patch causes problems for a number of models that had been incorrectly flagged as complete.
Differential Revision: https://reviews.llvm.org/D43235
llvm-svn: 329280
Makes it easier to see mistakes such as the one fixed in r329178 and makes
the different target CMakeLists more consistent.
Also remove some stale-looking comments from the Nios2 target cmakefile.
No intended behavior change.
llvm-svn: 329181
Currently EVT is in the IR layer only because of Function.cpp needing a very small piece of the functionality of EVT::getEVTString(). The rest of EVT is used in codegen making CodeGen a better place for it.
The previous code converted a Type* to EVT and then called getEVTString. This was only expected to handle the primitive types from Type*. Since there only a few primitive types, we can just print them as strings directly.
Differential Revision: https://reviews.llvm.org/D45017
llvm-svn: 328806
Legalize and emit code for quad-precision floating point operation xscvdpqp
and add option to guard the quad precision operation support.
Differential Revision: https://reviews.llvm.org/D44746
llvm-svn: 328558
A new function getOpcodeForSpill should now be the only place to get
the opcode for a given spilled register.
Differential Revision: https://reviews.llvm.org/D43086
llvm-svn: 328556
This is used by llvm tblgen as well as by LLVM Targets, so the only
common place is Support for now. (maybe we need another target for these
sorts of things - but for now I'm at least making them correct & we can
make them better if/when people have strong feelings)
llvm-svn: 328395
This patch adds functions to allow MachineLICM to hoist invariant stores.
Currently, MachineLICM does not hoist any store instructions, however
when storing the same value to a constant spot on the stack, the store
instruction should be considered invariant and be hoisted. The function
isInvariantStore iterates each operand of the store instruction and checks
that each register operand satisfies isCallerPreservedPhysReg. The store
may be fed by a copy, which is hoisted by isCopyFeedingInvariantStore.
This patch also adds the PowerPC changes needed to consider the stack
register as caller preserved.
Differential Revision: https://reviews.llvm.org/D40196
llvm-svn: 328326
Remove #include of Transforms/Scalar.h from Transform/Utils to fix layering.
Transforms depends on Transforms/Utils, not the other way around. So
remove the header and the "createStripGCRelocatesPass" function
declaration (& definition) that is unused and motivated this dependency.
Move Transforms/Utils/Local.h into Analysis because it's used by
Analysis/MemoryBuiltins.cpp.
llvm-svn: 328165
I'm not entirely sure these hacks are still needed. If you remove the hacks completely, the name of the library call that gets generated doesn't match the grep the test previously had. So the test wasn't really checking anything.
If the hack is still needed it belongs in PPC specific code. I believe the FP_TO_SINT code here is the only place in the tree where a FP_ROUND_INREG node is created today. And I don't think its even being used correctly because the legalization returned a BUILD_PAIR with the same value twice. That doesn't seem right to me. By moving the code entirely to PPC we can avoid creating the FP_ROUND_INREG at all.
I replaced the grep in the existing test with full checks generated by hacking update_llc_test_check.py to support ppc32 just long enough to generate it.
Differential Revision: https://reviews.llvm.org/D44061
llvm-svn: 328017
PowerPC targets do not use address spaces. As a result, we can get selection
failures with address space casts. This patch makes those casts noops.
Patch by Valentin Churavy.
Differential revision: https://reviews.llvm.org/D43781
llvm-svn: 327877
This patch adds functions to allow MachineLICM to hoist invariant stores.
Currently, MachineLICM does not hoist any store instructions, however
when storing the same value to a constant spot on the stack, the store
instruction should be considered invariant and be hoisted. The function
isInvariantStore iterates each operand of the store instruction and checks
that each register operand satisfies isCallerPreservedPhysReg. The store
may be fed by a copy, which is hoisted by isCopyFeedingInvariantStore.
This patch also adds the PowerPC changes needed to consider the stack
register as caller preserved.
Differential Revision: https://reviews.llvm.org/D40196
llvm-svn: 327856
Summary:
These are cases of self-references that exist today in practice. Let's
add tests for them to avoid regressions.
The self-references in PPCInstrInfo.td can be expressed in a simpler
way. Allowing this type of self-reference while at the same time
consistently doing late-resolve even for self-references is problematic
because there are references to fields that aren't in any class. Since
there's no need for this type of self-reference anyway, let's just
remove it.
Change-Id: I914e0b3e1ae7adae33855fac409b536879bc3f62
Reviewers: arsenm, craig.topper, tra, MartinO
Subscribers: nemanjai, wdng, kbarton, llvm-commits
Differential Revision: https://reviews.llvm.org/D44474
llvm-svn: 327848
PR35402 triggered this case. It bswap and stores a 48bit value, current STBRX optimization transforms it into STBRX. Unfortunately 48bit is not a simple MVT, there is no PPC instruction to support it, and it can't be automatically expanded by llvm, so caused a crash.
This patch detects the non-simple MVT and returns early.
Differential Revision: https://reviews.llvm.org/D44500
llvm-svn: 327651
This patch adds new load/store instructions for integer scalar types
which can be used for X-Form when fed by add with an @tls relocation.
Differential Revision: https://reviews.llvm.org/D43315
llvm-svn: 327635
Did some code cleanup up removing ItinRW that are not needed and resource types
that are no longer used.
Also added more comments to the td files related to the Power 9 sheduler model.
llvm-svn: 327174
The purpose of this patch is to have LSR generate better code on Power.
This is done by overriding isLSRCostLess.
Differential Revision: https://reviews.llvm.org/D40855
llvm-svn: 326906
The code checks Level == AfterLegalizeDAG which is the fourth and last of the possible DAG combine stages that we have.
There is a Level called AfterLegalVectorOps, but that's the third DAG combine and it doesn't always run.
A function called isAfterLegalVectorOps should imply it returns true in either of the DAG combines that runs after the legalize vector ops stage, but that's not what this function does.
llvm-svn: 326832
Up until Power9, the performance profile for rlwinm., rldicl. and andi. looked
more or less equivalent. However with Power9, the rotates are still 2-way
cracked whereas the and-immediate is not.
This patch just ensures that we don't emit record-form rotates when an andi.
is adequate.
As first pointed out by Carrot in https://bugs.llvm.org/show_bug.cgi?id=30833
(this patch is a fix for that PR).
Differential Revision: https://reviews.llvm.org/D43977
llvm-svn: 326736
Adding more instructions using InstRW so that we can move away from ItinRW
and ultimately have a complete Power 9 scheduler.
Differential Revision: https://reviews.llvm.org/D43899
llvm-svn: 326447
Emulated TLS is enabled by llc flag -emulated-tls,
which is passed by clang driver.
When llc is called explicitly or from other drivers like LTO,
missing -emulated-tls flag would generate wrong TLS code for targets
that supports only this mode.
Now use useEmulatedTLS() instead of Options.EmulatedTLS to decide whether
emulated TLS code should be generated.
Unit tests are modified to run with and without the -emulated-tls flag.
Differential Revision: https://reviews.llvm.org/D42999
llvm-svn: 326341
The instruction sequence used to get the address of the PC into a GPR requires
that we clobber the link register. Doing so without having first saved it in
the prologue leaves the function unable to return. Currently, this sequence is
emitted into the entry block. To ensure the prologue is inserted before this
sequence, disable shrink-wrapping.
This fixes PR33547.
Differential Revision: https://reviews.llvm.org/D43677
llvm-svn: 325972
This is the first in a series of patches that will define more
instructions using InstRW so that we can move away from ItinRW
and ultimately have a complete Power 9 scheduler.
Differential Revision: https://reviews.llvm.org/D43635
llvm-svn: 325956
Summary:
Add a target option AllowRegisterRenaming that is used to opt in to
post-register-allocation renaming of registers. This is set to 0 by
default, which causes the hasExtraSrcRegAllocReq/hasExtraDstRegAllocReq
fields of all opcodes to be set to 1, causing
MachineOperand::isRenamable to always return false.
Set the AllowRegisterRenaming flag to 1 for all in-tree targets that
have lit tests that were effected by enabling COPY forwarding in
MachineCopyPropagation (AArch64, AMDGPU, ARM, Hexagon, Mips, PowerPC,
RISCV, Sparc, SystemZ and X86).
Add some more comments describing the semantics of the
MachineOperand::isRenamable function and how it is set and maintained.
Change isRenamable to check the operand's opcode
hasExtraSrcRegAllocReq/hasExtraDstRegAllocReq bit directly instead of
relying on it being consistently reflected in the IsRenamable bit
setting.
Clear the IsRenamable bit when changing an operand's register value.
Remove target code that was clearing the IsRenamable bit when changing
registers/opcodes now that this is done conservatively by default.
Change setting of hasExtraSrcRegAllocReq in AMDGPU target to be done in
one place covering all opcodes that have constant pipe read limit
restrictions.
Reviewers: qcolombet, MatzeB
Subscribers: aemerson, arsenm, jyknight, mcrosier, sdardis, nhaehnle, javed.absar, tpr, arichardson, kristof.beyls, kbarton, fedor.sergeev, asb, rbar, johnrusso, simoncook, jordy.potman.lists, apazos, sabuasal, niosHD, escha, nemanjai, llvm-commits
Differential Revision: https://reviews.llvm.org/D43042
llvm-svn: 325931
The following set of instructions was originally planned to be added for Power 9
and so code was added to support them. However, a decision was made later on to
withdraw support for these instructions in the hardware.
xscmpnedp
xvcmpnesp
xvcmpnedp
This patch removes support for the instructions that were not added.
Differential Revision: https://reviews.llvm.org/D43641
llvm-svn: 325918
An FRem instruction inside a loop should prevent the loop from being converted
into a CTR loop since this is not an operation that is legal on any PPC
subtarget. This will always be a call to a library function which means the
loop will be invalid if this instruction is in the body.
Fixes PR36292.
llvm-svn: 325739
Current implementation always allocates the parameter save area conservatively
for fastcc functions. There is no reason to allocate the parameter save area if
all the parameters can be passed via registers.
Differential Revision: https://reviews.llvm.org/D42602
llvm-svn: 325581
Running a bootstrap build with UBSan produces a number of instances where
we have signed integer overflow due to this transform. Change the type to
long to prevent this UB on 64-bit build machines.
llvm-svn: 325347
PPCCTRLoops transform loops using mtctr/bdnz instructions if loop trip count is known and big enough to compensate for the cost of mtctr.
But if there is a loop exit edge which is known to be frequently taken (by builtin_expect or by PGO), we should not transform the loop to avoid the cost of mtctr instruction. Here is an example of a loop with hot exit edge:
for (unsigned i = 0; i < TripCount; i++) {
// do something
if (__builtin_expect(check(), 1))
break;
// do something
}
Differential Revision: https://reviews.llvm.org/D42637
llvm-svn: 324229
The one place that uses these functions isn't particularly
long/complicated, so it's easier to just have these inline at that
location than trying to split it out into a true header. (in part also
because of the use of the DEBUG macros, which make this not really a
standalone header even if the static functions were made inline instead)
llvm-svn: 324044
This is a rather non-controversial change. We were missing these instructions
from the list of instructions that are lane-sensitive. These two put the result
into lane 0 (BE) or 3 (LE) regardless of the input. This patch fixes PR36068.
llvm-svn: 324005
Enable multiple COPY hints to eliminate more COPYs during register allocation.
Note that this is something all targets should do, see
https://reviews.llvm.org/D38128.
Review: Nemanja Ivanovic
llvm-svn: 323858
candidates with coldcc attribute.
This recommits r322721 reverted due to sanitizer memory leak build bot failures.
Original commit message:
This patch adds support for the coldcc calling convention for Power.
This changes the set of non-volatile registers. It includes a pass to stress
test the implementation by marking all static directly called functions with
the coldcc attribute through the option -enable-coldcc-stress-test. It also
includes an option, -ppc-enable-coldcc, to add the coldcc attribute to
functions which are cold at all call sites based on BlockFrequencyInfo when
the containing function does not call any non cold functions.
Differential Revision: https://reviews.llvm.org/D38413
llvm-svn: 323778
Summary:
Fix an issue that's similar to what D41411 fixed:
float(__int128(float_var)) shouldn't be optimized to xscvdpsxds +
xscvsxdsp, as they mean (float)(int64_t)float_var.
Reviewers: jtony, hfinkel, echristo
Subscribers: sanjoy, nemanjai, hiraditya, llvm-commits, kbarton
Differential Revision: https://reviews.llvm.org/D42400
llvm-svn: 323270
candidates with coldcc attribute.
This patch adds support for the coldcc calling convention for Power.
This changes the set of non-volatile registers. It includes a pass to stress
test the implementation by marking all static directly called functions with
the coldcc attribute through the option -enable-coldcc-stress-test. It also
includes an option, -ppc-enable-coldcc, to add the coldcc attribute to
functions which are cold at all call sites based on BlockFrequencyInfo when
the containing function does not call any non cold functions.
Differential Revision: https://reviews.llvm.org/D38413
llvm-svn: 322721
When "xer" is specified as clobbered register in inline assembler, clang can accept it, but llvm simply ignore it when lowered to machine instructions. It may cause problems later in scheduler.
This patch adds a new register XER aliased to CARRY, and adds it to register class CARRYRC. Now PPCTargetLowering::getRegForInlineAsmConstraint can return correct register number for inline asm constraint "{xer}", and scheduler behave correctly.
Differential Revision: https://reviews.llvm.org/D41967
llvm-svn: 322591
Part of the fix for https://bugs.llvm.org/show_bug.cgi?id=35812.
This patch ensures that the compare operand for the atomic compare and swap
is properly zero-extended to 32 bits if applicable.
A follow-up commit will fix the extension for the SETCC node generated when
expanding an ATOMIC_CMP_SWAP_WITH_SUCCESS. That will complete the bug fix.
Differential Revision: https://reviews.llvm.org/D41856
llvm-svn: 322372
This patch makes the following changes to the schedule of instructions in the
prologue and epilogue.
The stack pointer update is moved down in the prologue so that the callee saves
do not have to wait for the update to happen.
Saving the lr is moved down in the prologue to hide the latency of the mflr.
The stack pointer is moved up in the epilogue so that restoring of the lr can
happen sooner.
The mtlr is moved up in the epilogue so that it is away form the blr at the end
of the epilogue. The latency of the mtlr can now be hidden by the loads of the
callee saved registers.
This commit is almost identical to this one: r322036 except that two warnings
that broke build bots have been fixed.
The revision number is D41737 as before.
llvm-svn: 322124
The CTRLoop pass performs checks on the argument of certain libcalls/intrinsics,
and assumes the arguments must be of a simple type. This isn't always the case
though. For example if we unroll and vectorize a loop we may end up with vectors
larger then the largest legal type, along with intrinsics that operate on those
wider types. This happened in the ffmpeg build, where we unrolled a loop and
ended up with a sqrt intrinsic that operated on V16f64, triggering an assertion.
Differential Revision: https://reviews.llvm.org/D41758
llvm-svn: 322055
This patch makes the following changes to the schedule of instructions in the
prologue and epilogue.
The stack pointer update is moved down in the prologue so that the callee saves
do not have to wait for the update to happen.
Saving the lr is moved down in the prologue to hide the latency of the mflr.
The stack pointer is moved up in the epilogue so that restoring of the lr can
happen sooner.
The mtlr is moved up in the epilogue so that it is away form the blr at the end
of the epilogue. The latency of the mtlr can now be hidden by the loads of the
callee saved registers.
Differential Revision: https://reviews.llvm.org/D41737
llvm-svn: 322036
Summary:
I believe legalization is really expecting that ReplaceNodeResults will return something with the same type as the thing that's being legalized. Ultimately, it uses the output to replace the uses in the DAG so the type should match to make that work.
There are two relevant cases here. When crbits are enabled, then i1 is a legal type and getSetCCResultType should return i1. In this case, the truncate will be between i1 and i1 and should be removed (SelectionDAG::getNode does this). Otherwise, getSetCCResultType will be i32 and the legalizer will promote the truncate to be i32 -> i32 which will be similarly removed.
With this fixed we can remove some code from PromoteIntRes_SETCC that seemed to only exist to deal with the intrinsic being replaced with a larger type without changing the other operand. With the truncate being used for connectivity this doesn't happen anymore.
Reviewers: hfinkel
Reviewed By: hfinkel
Subscribers: nemanjai, llvm-commits, kbarton
Differential Revision: https://reviews.llvm.org/D41654
llvm-svn: 321959
Currently it's not possible to access MCSubtargetInfo from a TgtMCAsmBackend.
D20830 threaded an MCSubtargetInfo reference through
MCAsmBackend::relaxInstruction, but this isn't the only function that would
benefit from access. This patch removes the Triple and CPUString arguments
from createMCAsmBackend and replaces them with MCSubtargetInfo.
This patch just changes the interface without making any intentional
functional changes. Once in, several cleanups are possible:
* Get rid of the awkward MCSubtargetInfo handling in ARMAsmBackend
* Support 16-bit instructions when valid in MipsAsmBackend::writeNopData
* Get rid of the CPU string parsing in X86AsmBackend and just use a SubtargetFeature for HasNopl
* Emit 16-bit nops in RISCVAsmBackend::writeNopData if the compressed instruction set extension is enabled (see D41221)
This change initially exposed PR35686, which has since been resolved in r321026.
Differential Revision: https://reviews.llvm.org/D41349
llvm-svn: 321692
If the callee and caller use different calling convensions, we cannot apply TCO if the callee requires arguments on stack; e.g. C calling convention and Fast CC use the same registers for parameter passing, but the stack offset is not necessarily same.
This patch also recommit r319218 "[PowerPC] Allow tail calls of fastcc functions from C CallingConv functions." by @sfertile since the problem reported in r320106 should be fixed.
Differential Revision: https://reviews.llvm.org/D40893
llvm-svn: 321579
Revision 320791 introduced a pass that transforms reg+reg instructions to
reg+imm if they're fed by "load immediate". However, it didn't
handle out-of-range shifts correctly as reported in PR35688.
This patch fixes that and therefore the PR.
Furthermore, there was undefined behaviour in the patch where the RHS of an
initialization expression was 32 bits and constant `1` was shifted left 32
bits. This was fixed by ensuring the RHS is 64 bits just like the LHS.
Differential Revision: https://reviews.llvm.org/D41369
llvm-svn: 321551
Re-land r321234. It had to be reverted because it broke the shared
library build. The shared library build broke because there was a
missing LLVMBuild dependency from lib/Passes (which calls
TargetMachine::getTargetIRAnalysis) to lib/Target. As far as I can
tell, this problem was always there but was somehow masked
before (perhaps because TargetMachine::getTargetIRAnalysis was a
virtual function).
Original commit message:
This makes the TargetMachine interface a bit simpler. We still need
the std::function in TargetIRAnalysis to avoid having to add a
dependency from Analysis to Target.
See discussion:
http://lists.llvm.org/pipermail/llvm-dev/2017-December/119749.html
I avoided adding all of the backend owners to this review since the
change is simple, but let me know if you feel differently about this.
Reviewers: echristo, MatzeB, hfinkel
Reviewed By: hfinkel
Subscribers: jholewinski, jfb, arsenm, dschuff, mcrosier, sdardis, nemanjai, nhaehnle, javed.absar, sbc100, jgravelle-google, aheejin, kbarton, llvm-commits
Differential Revision: https://reviews.llvm.org/D41464
llvm-svn: 321375
The build failure was caused by an assertion in pre-legalization DAGCombine:
Combining: t6: ppcf128 = uint_to_fp t5
... into: t20: f32 = PPCISD::FCFIDUS t19
which is clearly wrong since ppcf128 are definitely different type with f32 and
we cannot change the node value type when do DAGCombine. The fix is don't
handle ppc_fp128 or i1 conversions in PPCTargetLowering::combineFPToIntToFP and
leave it to downstream to legalize it and expand it to small legal types.
Differential Revision: https://reviews.llvm.org/D41411
llvm-svn: 321276
Summary:
This makes the TargetMachine interface a bit simpler. We still need
the std::function in TargetIRAnalysis to avoid having to add a
dependency from Analysis to Target.
See discussion:
http://lists.llvm.org/pipermail/llvm-dev/2017-December/119749.html
I avoided adding all of the backend owners to this review since the
change is simple, but let me know if you feel differently about this.
Reviewers: echristo, MatzeB, hfinkel
Reviewed By: hfinkel
Subscribers: jholewinski, jfb, arsenm, dschuff, mcrosier, sdardis, nemanjai, nhaehnle, javed.absar, sbc100, jgravelle-google, aheejin, kbarton, llvm-commits
Differential Revision: https://reviews.llvm.org/D41464
llvm-svn: 321234
The function createTailCallBranchInstr assumes that the iterator MBBI is valid.
However, only one use of MBBI is guarded in the function.
Fix this by adding an assert.
Differential Revision: https://reviews.llvm.org/D41358
llvm-svn: 321205
This patch fixes a bug in the redundant compare elimination reported in https://reviews.llvm.org/rL320786 and re-enables the optimization.
The redundant compare elimination assumes that we can replace signed comparison with unsigned comparison for the equality check. But due to the difference in the sign extension behavior we cannot change the opcode if the comparison is against an immediate and the most significant bit of the immediate is one.
Differential Revision: https://reviews.llvm.org/D41385
llvm-svn: 321147
r307148 added an assembly mnemonic spelling correction support and enabled it
on ARM. This enables that support on PowerPC as well.
Patch by Dmitry Venikov, thanks!
Differential Revision: https://reviews.llvm.org/D40552
llvm-svn: 320911
QingShan Zhang