Summary:
Problem exposed in PowerPC functional testing.
We did not consider Anti dependence for nodes in same cycle,
so we may end up generating bad machine code.
eg: the reduced test won't verify.
*** Bad machine code: Using an undefined physical register ***
- function: lame_encode_buffer_interleaved
- basic block: %bb.4 (0x4bde4e12928)
- instruction: %29:gprc = ADDZE %27:gprc, implicit-def dead $carry, implicit $carry
- operand 3: implicit $carry
Reviewers: bcahoon, kparzysz, hfinkel
Subscribers: MaskRay, wuzish, nemanjai, hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D64192
llvm-svn: 365859
Stubs out a number of the classes needed to produce a new object file format
(XCOFF) for the powerpc-aix target. For testing input is an empty module which
produces an object file with just a file header.
Differential Revision: https://reviews.llvm.org/D61694
llvm-svn: 365541
Summary:
`extsw` and `sldi` are supposed to be combined if they are in the same
BB in instruction selection phase. This patch handles the case where
extsw and sldi are not in the same BB.
Differential Revision: https://reviews.llvm.org/D63806
llvm-svn: 365430
Summary:
This is exposed by functional testing on PowerPC.
In some pipelined loops, Phi refer to phi did not get value defined by
the Phi, hence getting wrong value later.
As the comment mentioned, we should "use the value defined by the Phi,
unless we're generating the firstepilog and the Phi refers to a Phi
in a different stage.", so Phi refering to same stage Phi should use
the value defined by the Phi here.
Reviewers: bcahoon, hfinkel
Reviewed By: hfinkel
Subscribers: MaskRay, wuzish, nemanjai, hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D64035
llvm-svn: 365428
The indirect call sequence on PPC requires that the TOC base register be saved
prior to the indirect call and restored after the call since the indirect call
may branch to a global entry point in another DSO which will update the TOC
base. Over the last couple of years, we have improved this to:
- be able to hoist TOC saves from loops (with changes to MachineLICM)
- avoid multiple saves when one dominates the other[s]
However, it is still possible to have multiple TOC saves dynamically in the
execution path if there is no dominance relationship between them.
This patch moves the TOC save to the prologue when one of the TOC saves is in a
block that post-dominates entry (i.e. it cannot be avoided) or if it is in a
block that is hotter than entry.
Differential revision: https://reviews.llvm.org/D63803
llvm-svn: 365232
Summary:
"ww" and "ws" are both constraint codes for VSX vector registers that
hold scalar double data. "ww" is preferred for float while "ws" is
preferred for double.
Reviewed By: jsji
Differential Revision: https://reviews.llvm.org/D64119
llvm-svn: 365106
Summary:
This is the backend part of [[ https://bugs.llvm.org/show_bug.cgi?id=42457 | PR42457 ]].
In middle-end, we'd want to prefer the form with two adds - D63992,
but as this diff shows, not every target will prefer that pattern.
Out of 4 targets for which i added tests all seem to be ok with inc-of-add for scalars,
but only X86 prefer that same pattern for vectors.
Here i'm adding a new TLI hook, always defaulting to the inc-of-add,
but adding AArch64,ARM,PowerPC overrides to prefer inc-of-add only for scalars.
Reviewers: spatel, RKSimon, efriedma, t.p.northover, hfinkel
Reviewed By: efriedma
Subscribers: nemanjai, javed.absar, kristof.beyls, kbarton, jsji, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D64090
llvm-svn: 365010
I initially committed it with --check-prefix instead of --check-prefixes
(again, shame on me, and utils/update_*.py not complaining!)
and did not have a moment to understand the failure,
so i reverted it initially in rL64939.
llvm-svn: 364945
As it is pointed out in https://reviews.llvm.org/D63992,
before we get to pick canonical variant in middle-end
we should ensure best codegen in backend.
llvm-svn: 364930
After implemented this hook, we will model the memory dependency in the scheduling dependency graph more precise,
and will have more opportunity to reorder the load/stores, as they didn't have the dependency at some condition
Differential Revision: https://reviews.llvm.org/D63804
llvm-svn: 364886
Summary:
SCRUB_LOOP_COMMENT_RE was introduced in https://reviews.llvm.org/D31285
This works for some loops.
However, we may generate lines with loop comments only.
And since we don't scrub leading white spaces, this will leave an empty
line there, and FileCheck will complain it.
eg: llvm/test/CodeGen/PowerPC/PR35812-neg-cmpxchg.ll:27:15:
error: found empty check string with prefix 'CHECK:'
; CHECK-NEXT:
This prevented us from using the `update_llc_test_checks.py` for quite some cases.
We should still keep the comment token there, so that we can safely
scrub the loop comment without breaking FileCheck.
Reviewers: timshen, hfinkel, lebedev.ri, RKSimon
Subscribers: nemanjai, jfb, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D63957
llvm-svn: 364775
This was reported in https://bugs.llvm.org/show_bug.cgi?id=41751
llvm-mc aborted when disassembling tabortdc.
This patch try to clean up TM related DAGs.
* Fixes the problem by remove explicit output of cr0, and put it as implicit def.
* Update int_ppc_tbegin pattern to accommodate the implicit def of cr0.
* Update the TCHECK operand and int_ppc_tcheck accordingly.
* Add some builtin test and disassembly tests.
* Remove unused CRRC0/crrc0
Differential Revision: https://reviews.llvm.org/D61935
llvm-svn: 364544
This allows later passes (in particular InstCombine) to optimize more
cases.
One that's important to us is `memcmp(p, q, constant) < 0` and memcmp(p, q, constant) > 0.
llvm-svn: 364412
For some reason, the update_llc_checks.py script produces checks for
empty lines which cause failures. Corrected that to check for actual
text produced by llc.
llvm-svn: 364377
An upcoming patch will modify the behaviour with respect to saving the TOC
in functions with indirect calls.
Adding a test case so the patch will show the difference in codegen.
llvm-svn: 364375
This was just an omission in the back end. We have had the instructions for both
single and double precision for a few HW generations, but never got around to
legalizing these.
Differential revision: https://reviews.llvm.org/D63634
llvm-svn: 364373
When we calculate MII, we use two loops, one with iterator R++ to
check whether we can reserve the resource, then --R to move back
the iterator to do reservation.
This is risky, as R++, --R may not point to the same element at all.
The can cause wrong MII.
Differential Revision: https://reviews.llvm.org/D63536
llvm-svn: 364353
Summary:
In Secure PLT ABI, -fpic is similar to -fPIC. The differences are that:
* -fpic stores the address of _GLOBAL_OFFSET_TABLE_ in r30, while -fPIC stores .got2+0x8000.
* -fpic uses an addend of 0 for R_PPC_PLTREL24, while -fPIC uses 0x8000.
Reviewers: hfinkel, jhibbits, joerg, nemanjai, spetrovic
Reviewed By: jhibbits
Subscribers: adalava, kbarton, jsji, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D63563
llvm-svn: 364324
Widen vector result type for ctlz_zero_undef and cttz_zero_undef the same as
ctlz and cttz.
Differential Revision: https://reviews.llvm.org/D63463
llvm-svn: 364221
There are quite some old testcases with powerpc- triple,
we should add this triple support so that we can update them with script.
Differential Revision: https://reviews.llvm.org/D63723
llvm-svn: 364213
This allows targets to make more decisions about reserved registers
after isel. For example, now it should be certain there are calls or
stack objects in the frame or not, which could have been introduced by
legalization.
Patch by Matthias Braun
llvm-svn: 363757
This adds vector splitting for vaarg instructions during type legalization
Committed on behalf of @luke (Luke Lau)
Differential Revision: https://reviews.llvm.org/D60762
llvm-svn: 363671
This patch changes MIR stack-id from an integer to an enum,
and adds printing/parsing support for this in MIR files. The default
stack-id '0' is now renamed to 'default'.
This should make MIR tests that have stack objects with different stack-ids
more descriptive. It also clarifies code operating on StackID.
Reviewers: arsenm, thegameg, qcolombet
Reviewed By: arsenm
Differential Revision: https://reviews.llvm.org/D60137
llvm-svn: 363533
Summary:
SPE passes doubles the same as soft-float, in register pairs as i32
types. This is all handled by the target-independent layer. However,
this is not optimal when splitting or reforming the doubles, as it
pushes to the stack and loads from, on either side.
For instance, to pass a double argument to a function, assuming the
double value is in r5, the sequence currently looks like this:
evstdd 5, X(1)
lwz 3, X(1)
lwz 4, X+4(1)
Likewise, to form a double into r5 from args in r3 and r4:
stw 3, X(1)
stw 4, X+4(1)
evldd 5, X(1)
This optimizes the fence to use SPE instructions. Now, to pass a double
to a function:
mr 4, 5
evmergehi 3, 5, 5
And to form a double into r5 from args in r3 and r4:
evmergelo 5, 3, 4
This is comparable to the way that gcc generates the double splits.
This also fixes a bug with expanding builtins to libcalls, where the
LowerCallTo() code path was generating intermediate illegal type nodes.
Reviewers: nemanjai, hfinkel, joerg
Subscribers: kbarton, jfb, jsji, llvm-commits
Differential Revision: https://reviews.llvm.org/D54583
llvm-svn: 363526
Summary:
If the nested loop is an innermost loop, prefer to a 32-byte alignment, so that
we can decrease cache misses and branch-prediction misses. Actual alignment of
the loop will depend on the hotness check and other logic in alignBlocks.
The old code will only align hot loop to 32 bytes when the LoopSize larger than
16 bytes and smaller than 32 bytes, this patch will align the innermost hot loop
to 32 bytes not only for the hot loop whose size is 16~32 bytes.
Reviewed By: steven.zhang, jsji
Differential Revision: https://reviews.llvm.org/D61228
llvm-svn: 363495
Current findBestLoopTop can find and move one kind of block to top, a latch block has one successor. Another common case is:
* a latch block
* it has two successors, one is loop header, another is exit
* it has more than one predecessors
If it is below one of its predecessors P, only P can fall through to it, all other predecessors need a jump to it, and another conditional jump to loop header. If it is moved before loop header, all its predecessors jump to it, then fall through to loop header. So all its predecessors except P can reduce one taken branch.
Differential Revision: https://reviews.llvm.org/D43256
llvm-svn: 363471
This was exposed by PowerPC target enablement.
In ScheduleDAG, if we haven't seen any uses in this scheduling region,
we will create a dependence edge to ExitSU to model the live-out latency.
This is required for vreg defs with no in-region use, and prefetches with
no vreg def.
When we build NodeOrder in Scheduler, we ignore these boundary nodes.
However, when we check Succs in checkValidNodeOrder, we did not skip
them, so we still assume all the nodes have been sorted and in order in
Indices array. So when we call lower_bound() for ExitSU, it will return
Indices.end(), causing memory issues in following Node access.
Differential Revision: https://reviews.llvm.org/D63282
llvm-svn: 363329
Summary:
Relate bug: https://bugs.llvm.org/show_bug.cgi?id=37472
The shrink wrapping pass prematurally restores the stack, at a point where the stack might still be accessed.
Taking an exception can cause the stack to be corrupted.
As a first approach, this patch is overly conservative, assuming that any instruction that may load or store could access
the stack.
Reviewers: dmgreen, qcolombet
Reviewed By: qcolombet
Subscribers: simpal01, efriedma, eli.friedman, javed.absar, llvm-commits, eugenis, chill, carwil, thegameg
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D63152
llvm-svn: 363265
Looks like a MachinePipeliner algorithm problem found by
sanitizer-x86_64-linux-fast.
I will backout this test first while investigating the problem to
unblock buildbot.
==49637==ERROR: AddressSanitizer: heap-buffer-overflow on address
0x614000002e08 at pc 0x000004364350 bp 0x7ffe228a3bd0 sp 0x7ffe228a3bc8
READ of size 4 at 0x614000002e08 thread T0
#0 0x436434f in
llvm::SwingSchedulerDAG::checkValidNodeOrder(llvm::SmallVector<llvm::NodeSet,
8u> const&) const
/b/sanitizer-x86_64-linux-fast/build/llvm/lib/CodeGen/MachinePipeliner.cpp:3736:11
#1 0x4342cd0 in llvm::SwingSchedulerDAG::schedule()
/b/sanitizer-x86_64-linux-fast/build/llvm/lib/CodeGen/MachinePipeliner.cpp:486:3
#2 0x434042d in
llvm::MachinePipeliner::swingModuloScheduler(llvm::MachineLoop&)
/b/sanitizer-x86_64-linux-fast/build/llvm/lib/CodeGen/MachinePipeliner.cpp:385:7
#3 0x433eb90 in
llvm::MachinePipeliner::runOnMachineFunction(llvm::MachineFunction&)
/b/sanitizer-x86_64-linux-fast/build/llvm/lib/CodeGen/MachinePipeliner.cpp:207:5
#4 0x428b7ea in
llvm::MachineFunctionPass::runOnFunction(llvm::Function&)
/b/sanitizer-x86_64-linux-fast/build/llvm/lib/CodeGen/MachineFunctionPass.cpp:73:13
#5 0x4d1a913 in llvm::FPPassManager::runOnFunction(llvm::Function&)
/b/sanitizer-x86_64-linux-fast/build/llvm/lib/IR/LegacyPassManager.cpp:1648:27
#6 0x4d1b192 in llvm::FPPassManager::runOnModule(llvm::Module&)
/b/sanitizer-x86_64-linux-fast/build/llvm/lib/IR/LegacyPassManager.cpp:1685:16
#7 0x4d1c06d in runOnModule
/b/sanitizer-x86_64-linux-fast/build/llvm/lib/IR/LegacyPassManager.cpp:1752:27
#8 0x4d1c06d in llvm::legacy::PassManagerImpl::run(llvm::Module&)
/b/sanitizer-x86_64-linux-fast/build/llvm/lib/IR/LegacyPassManager.cpp:1865
#9 0xa48ca3 in compileModule(char**, llvm::LLVMContext&)
/b/sanitizer-x86_64-linux-fast/build/llvm/tools/llc/llc.cpp:611:8
#10 0xa4270f in main
/b/sanitizer-x86_64-linux-fast/build/llvm/tools/llc/llc.cpp:365:22
#11 0x7fec902572e0 in __libc_start_main
(/lib/x86_64-linux-gnu/libc.so.6+0x202e0)
#12 0x971b69 in _start
(/b/sanitizer-x86_64-linux-fast/build/llvm_build_asan/bin/llc+0x971b69)
llvm-svn: 363105
Implement necessary target hooks to enable MachinePipeliner for P9 only.
The pass is off by default, can be enabled with -ppc-enable-pipeliner for P9.
Differential Revision: https://reviews.llvm.org/D62164
llvm-svn: 363085
This was found during HTM cleanup.
Adding a test for builtin_ttest would expose following issue.
*** Bad machine code: Illegal physical register for instruction ***
- function: test10
- basic block: %bb.0 entry (0xf0e57497b58)
- instruction: %5:crrc0 = TABORTWCI 0, $zero, 0
- operand 2: $zero
$zero is not a GPRC register.
LLVM ERROR: Found 1 machine code errors.
Differential Revision: https://reviews.llvm.org/D63079
llvm-svn: 362974
This opportunity is found from spec 2017 557.xz_r. And it is used by the sha encrypt/decrypt. See sha-2/sha512.c
static void store64(u64 x, unsigned char* y)
{
for(int i = 0; i != 8; ++i)
y[i] = (x >> ((7-i) * 8)) & 255;
}
static u64 load64(const unsigned char* y)
{
u64 res = 0;
for(int i = 0; i != 8; ++i)
res |= (u64)(y[i]) << ((7-i) * 8);
return res;
}
The load64 has been implemented by https://reviews.llvm.org/D26149
This patch is trying to implement the store pattern.
Match a pattern where a wide type scalar value is stored by several narrow
stores. Fold it into a single store or a BSWAP and a store if the targets
supports it.
Assuming little endian target:
i8 *p = ...
i32 val = ...
p[0] = (val >> 0) & 0xFF;
p[1] = (val >> 8) & 0xFF;
p[2] = (val >> 16) & 0xFF;
p[3] = (val >> 24) & 0xFF;
>
*((i32)p) = val;
i8 *p = ...
i32 val = ...
p[0] = (val >> 24) & 0xFF;
p[1] = (val >> 16) & 0xFF;
p[2] = (val >> 8) & 0xFF;
p[3] = (val >> 0) & 0xFF;
>
*((i32)p) = BSWAP(val);
Differential Revision: https://reviews.llvm.org/D62897
llvm-svn: 362921
When we call checkResourceLimit in bumpCycle or bumpNode, and we
know the resource count has just reached the limit (the equations
are equal). We should return true to mark that we are resource
limited for next schedule, or else we might continue to schedule
in favor of latency for 1 more schedule and create a schedule that
actually overbook the resource.
When we call checkResourceLimit to estimate the resource limite before
scheduling, we don't need to return true even if the equations are
equal, as it shouldn't limit the schedule for it .
Differential Revision: https://reviews.llvm.org/D62345
llvm-svn: 362805
Patch which introduces a target-independent framework for generating
hardware loops at the IR level. Most of the code has been taken from
PowerPC CTRLoops and PowerPC has been ported over to use this generic
pass. The target dependent parts have been moved into
TargetTransformInfo, via isHardwareLoopProfitable, with
HardwareLoopInfo introduced to transfer information from the backend.
Three generic intrinsics have been introduced:
- void @llvm.set_loop_iterations
Takes as a single operand, the number of iterations to be executed.
- i1 @llvm.loop_decrement(anyint)
Takes the maximum number of elements processed in an iteration of
the loop body and subtracts this from the total count. Returns
false when the loop should exit.
- anyint @llvm.loop_decrement_reg(anyint, anyint)
Takes the number of elements remaining to be processed as well as
the maximum numbe of elements processed in an iteration of the loop
body. Returns the updated number of elements remaining.
llvm-svn: 362774
Use the PPC vector min/max instructions for computing the corresponding
operation as these should be faster than the compare/select sequences
we currently emit.
Differential revision: https://reviews.llvm.org/D47332
llvm-svn: 362759
Summary:
(1) Function descriptor on AIX
On AIX, a called routine may have 2 distinct symbols associated with it:
* A function descriptor (Name)
* A function entry point (.Name)
The descriptor structure on AIX is the same as those in the ELF V1 ABI:
* The address of the entry point of the function.
* The TOC base address for the function.
* The environment pointer.
The descriptor symbol uses the same name as the source level function in C.
The function entry point is analogous to the symbol we would generate for a
function in a non-descriptor-based ABI, except that it is renamed by
prepending a ".".
Which symbol gets referenced depends on the context:
* Taking the address of the function references the descriptor symbol.
* Calling the function references the entry point symbol.
(2) Speaking of implementation on AIX, for direct function call target, we
create proper MCSymbol SDNode(e.g . ".foo") while constructing SDAG to
replace original TargetGlobalAddress SDNode. Then down the path, we can
take advantage of this MCSymbol.
Patch by: Xiangling_L
Reviewed by: sfertile, hubert.reinterpretcast, jasonliu, syzaara
Differential Revision: https://reviews.llvm.org/D62532
llvm-svn: 362735
Summary:
This patch implements SDAG call lowering on AIX for functions
which only have parameters that could fit into GPRs.
Reviewers: hubert.reinterpretcast, syzaara
Differential Revision: https://reviews.llvm.org/D62823
llvm-svn: 362708
Generally speaking, we lower to an optimal rotate sequence for nodes visible in
the SDAG. However, there are instances where the two rotates are not visible at
ISEL time - most notably those in a very common sequence when lowering switch
statements to jump tables.
A common situation is a switch on a 32-bit integer. This value has to have the
upper 32 bits cleared and because jump table offsets are word offsets, the value
needs to be shifted left by 2 bits. We currently emit the clear and the left
shift as two separate instructions, but this is not needed as we can lower it to
a single RLDIC.
This patch just cleans that up.
Differential revision: https://reviews.llvm.org/D60402
llvm-svn: 362576
NFC commit of a test case in order for the subsequent review to show differences
in codegen.
Differential revision: https://reviews.llvm.org/D62843
llvm-svn: 362573
This is to address some of the problems in existing P9 resource modeling,
especially about the dispatching rules.
Instead of using a hypothetical DISPATCHER , we try to use the number of
actual dispatch slots, and define SchedWriteRes to model dispatch rules,
then update instruction classes according to dispatch rules.
All the dispatch rules and instruction classes update are made according
to POWER9 User Manual.
Differential Revision: https://reviews.llvm.org/D61873
llvm-svn: 362509
This opportunity is found from spec 2017 557.xz_r. And it is used by the sha encrypt/decrypt. See sha-2/sha512.c
static void store64(u64 x, unsigned char* y)
{
for(int i = 0; i != 8; ++i)
y[i] = (x >> ((7-i) * 8)) & 255;
}
static u64 load64(const unsigned char* y)
{
u64 res = 0;
for(int i = 0; i != 8; ++i)
res |= (u64)(y[i]) << ((7-i) * 8);
return res;
}
The load64 has been implemented by https://reviews.llvm.org/D26149
This patch is trying to implement the store pattern.
Match a pattern where a wide type scalar value is stored by several narrow
stores. Fold it into a single store or a BSWAP and a store if the targets
supports it.
Assuming little endian target:
i8 *p = ...
i32 val = ...
p[0] = (val >> 0) & 0xFF;
p[1] = (val >> 8) & 0xFF;
p[2] = (val >> 16) & 0xFF;
p[3] = (val >> 24) & 0xFF;
>
*((i32)p) = val;
i8 *p = ...
i32 val = ...
p[0] = (val >> 24) & 0xFF;
p[1] = (val >> 16) & 0xFF;
p[2] = (val >> 8) & 0xFF;
p[3] = (val >> 0) & 0xFF;
>
*((i32)p) = BSWAP(val);
Differential Revision: https://reviews.llvm.org/D61843
llvm-svn: 362472
Summary: This change facilitates propagating fmf which was placed on setcc from fcmp through folds with selects so that back ends can model this path for arithmetic folds on selects in SDAG.
Reviewers: qcolombet, spatel
Reviewed By: qcolombet
Subscribers: nemanjai, jsji
Differential Revision: https://reviews.llvm.org/D62552
llvm-svn: 362439
We currently miss the opportunities for optmizing comparisons in the peephole
optimizer if the input is the result of a COPY since we look for record-form
versions of the producing instruction.
This patch simply lets the optimization peek through copies.
Differential revision: https://reviews.llvm.org/D59633
llvm-svn: 362438
In PPCReduceCRLogicals after splitting the original MBB into 2, the 2 impacted branches still use original branch probability. This is unreasonable. Suppose we have following code, and the probability of each successor is 50%.
condc = conda || condb
br condc, label %target, label %fallthrough
It can be transformed to following,
br conda, label %target, label %newbb
newbb:
br condb, label %target, label %fallthrough
Since each branch has a probability of 50% to each successor, the total probability to %fallthrough is 25% now, and the total probability to %target is 75%. This actually changed the original profiling data. A more reasonable probability can be set to 70% to the false side for each branch instruction, so the total probability to %fallthrough is close to 50%.
This patch assumes the branch target with two incoming edges have same edge frequency and computes new probability fore each target, and keep the total probability to original targets unchanged.
Differential Revision: https://reviews.llvm.org/D62430
llvm-svn: 362237
The powerpc64-"nonle" tests are removed. They fail because of a bug that
Drew is currently working on that affects multiple targets.
Submitted by: Drew Wock <drew.wock@sas.com>
Reviewed by: Hal Finkel, Kevin P. Neal
Approved by: Hal Finkel
Differential Revision: http://reviews.llvm.org/D62388
llvm-svn: 361985
This patch add the ISD::LRINT and ISD::LLRINT along with new
intrinsics. The changes are straightforward as for other
floating-point rounding functions, with just some adjustments
required to handle the return value being an interger.
The idea is to optimize lrint/llrint generation for AArch64
in a subsequent patch. Current semantic is just route it to libm
symbol.
Reviewed By: craig.topper
Differential Revision: https://reviews.llvm.org/D62017
llvm-svn: 361875
The test based on PR42010:
https://bugs.llvm.org/show_bug.cgi?id=42010
...may show an inaccuracy for PPC's target defs, but we should not
be so aggressive with an assert here. There's no telling what out-of-tree
targets look like.
llvm-svn: 361696
Summary:dd
This patch implements call lowering for calls without parameters
on AIX as initial support.
Reviewers: sfertile, hubert.reinterpretcast, aheejin, efriedma
Differential Revision: https://reviews.llvm.org/D61948
llvm-svn: 361669
For the situation, where we generate the following code:
crxor 8, 8, 8
< Some instructions>
.LBB0_1:
< Some instructions>
cror 1, 8, 8
cror (COPY of CRbit) depends on the result of the crxor instruction.
CR8 is known to be zero as crxor is equivalent to CRUNSET. We can simply use
crxor 1, 1, 1 instead to zero out CR1, which does not have any dependency on
any previous instruction.
This patch will optimize it to:
< Some instructions>
.LBB0_1:
< Some instructions>
cror 1, 1, 1
Patch By: Victor Huang (NeHuang)
Differential Revision: https://reviews.llvm.org/D62044
llvm-svn: 361632
When we are scheduling the load and addi, if all other heuristic didn't take effect,
we will try to schedule the addi before the load, to hide the latency, and avoid the
true dependency added by RA. And this only take effects for Power9.
Differential Revision: https://reviews.llvm.org/D61930
llvm-svn: 361600
Summary:
Appears identical to powerpc64{,le}.
Regenerate test that is being affected by upcoming patch.
Reviewers: RKSimon
Reviewed By: RKSimon
Subscribers: nemanjai, jsji, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D62339
llvm-svn: 361543
Summary:
For big-endian powerpc64, the default ABI is ELFv1. OpenPower ABI ELFv2 is supported when -mabi=elfv2 is specified. FreeBSD support for PowerPC64 ELFv2 ABI with LLVM is in progress[1]. This patch adds an alternative way to specify ELFv2 ABI on target triple [2].
The following results are expected:
ELFv1 when using:
-target powerpc64-unknown-freebsd12.0
-target powerpc64-unknown-freebsd12.0 -mabi=elfv1
-target powerpc64-unknown-freebsd12.0-elfv1
ELFv2 when using:
-target powerpc64-unknown-freebsd12.0 -mabi=elfv2
-target powerpc64-unknown-freebsd12.0-elfv2
[1] https://wiki.freebsd.org/powerpc/llvm-elfv2
[2] https://clang.llvm.org/docs/CrossCompilation.html
Patch by Alfredo Dal'Ava Júnior!
Differential Revision: https://reviews.llvm.org/D61950
llvm-svn: 361355
With a fix for PR41917: The predecessor list was changing under our feet.
- for (BasicBlock *Pred : predecessors(EntryBlock_)) {
+ while (!pred_empty(EntryBlock_)) {
+ BasicBlock* const Pred = *pred_begin(EntryBlock_);
llvm-svn: 361009
This patch add the ISD::LROUND and ISD::LLROUND along with new
intrinsics. The changes are straightforward as for other
floating-point rounding functions, with just some adjustments
required to handle the return value being an interger.
The idea is to optimize lround/llround generation for AArch64
in a subsequent patch. Current semantic is just route it to libm
symbol.
llvm-svn: 360889
Trace through multiple COPYs when looking for a physreg source. Add
hinting for vregs that will be copied into physregs (we only hinted
for vregs getting copied to a physreg previously). Give hinted a
register a bonus when deciding which value to spill. This is part of
my rewrite regallocfast series. In fact this one doesn't even have an
effect unless you also flip the allocation to happen from back to
front of a basic block. Nonetheless it helps to split this up to ease
review of D52010
Patch by Matthias Braun
llvm-svn: 360887
Summary:
The emitError path allows the program to continue, unlike report_fatal_error.
This is friendlier to use cases where LLVM is embedded in a larger program,
because the caller may be able to deal with the error somewhat gracefully.
Change the number of requested NOP bytes in the AArch64 and PowerPC
test cases to avoid triggering an unrelated assertion. The compilation
still fails, as verified by the test.
Change-Id: Iafb9ca341002a597b82e59ddc7a1f13c78758e3d
Reviewers: arsenm, MatzeB
Subscribers: qcolombet, nemanjai, wdng, javed.absar, kristof.beyls, kbarton, jsji, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D61489
llvm-svn: 360786
Instead of patching the original blocks, we now generate new blocks and
delete the old blocks. This results in simpler code with a less twisted
control flow (see the change in `entry-block-shuffled.ll`).
This will make https://reviews.llvm.org/D60318 simpler by making it more
obvious where control flow created and deleted.
Reviewers: gchatelet
Subscribers: hiraditya, llvm-commits, spatel
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D61736
llvm-svn: 360771
The 3-field form was introduced by D3499 in 2014 and the legacy 2-field
form was planned to be removed in LLVM 4.0
For the textual format, this patch migrates the existing 2-field form to
use the 3-field form and deletes the compatibility code.
test/Verifier/global-ctors-2.ll checks we have a friendly error message.
For bitcode, lib/IR/AutoUpgrade UpgradeGlobalVariables will upgrade the
2-field form (add i8* null as the third field).
Reviewed By: rnk, dexonsmith
Differential Revision: https://reviews.llvm.org/D61547
llvm-svn: 360742
For known CRBit spills, CRSET/CRUNSET, it is more efficient to load and spill
the known value instead of extracting the bit.
eg. This sequence is currently used to spill a CRUNSET:
crclr 4*cr5+lt
mfocrf r3,4
rlwinm r3,r3,20,0,0
stw r3,132(r1)
This patch custom lower it to:
li r3,0
stw r3,132(r1)
Differential Revision: https://reviews.llvm.org/D61754
llvm-svn: 360677
Summary:
X86TargetLowering::LowerAsmOperandForConstraint had better support than
TargetLowering::LowerAsmOperandForConstraint for arbitrary depth
getelementpointers for "i", "n", and "s" extended inline assembly
constraints. Hoist its support from the derived class into the base
class.
Link: https://github.com/ClangBuiltLinux/linux/issues/469
Reviewers: echristo, t.p.northover
Reviewed By: t.p.northover
Subscribers: t.p.northover, E5ten, kees, jyknight, nemanjai, javed.absar, eraman, hiraditya, jsji, llvm-commits, void, craig.topper, nathanchance, srhines
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D61560
llvm-svn: 360604
build-vector-tests.ll is a huge testcase, it is hard to maintain: eg:
any fundamental changes might need to update hundreds of lines. We should
leverage the script to maintain it.
This patch simply run utils/update_llc_test_checks.py on it. There
should be no missing test points.
llvm-svn: 360175
The single-constant algorithm produces infinities on a lot of denormal values.
The precision of the two-constant algorithm is actually sufficient across the
range of denormals. We will switch to that algorithm for now to avoid the
infinities on denormals. In the future, we will re-evaluate the algorithm to
find the optimal one for PowerPC.
Differential revision: https://reviews.llvm.org/D60037
llvm-svn: 360144
A condition for exiting the legalization of v4i32 conversion to v2f64 through
extract/convert/build erroneously checks for the extract having type i32.
This is not adequate as smaller extracts are actually legalized to i32 as well.
Furthermore, an early exit is missing which means that we only check that
both extracts are from the same vector if that check fails.
As a result, both cases in the included test case fail - the first gets a
select error and the second generates incorrect code.
The culprit commit is r274535.
llvm-svn: 360043
This is a slightly reduced version of the test from D61384.
Adding this as a preliminary step, so I can update D61149 with
the proposed fix.
llvm-svn: 359709
-t is --symbols in llvm-readobj but --section-details (unimplemented) in readelf.
The confusing option should not be used since we aim for improving
compatibility.
Keep just one llvm-readobj -t use case in test/tools/llvm-readobj/symbols.test
llvm-svn: 359661
Do not combine (trunc adde(X, Y, Carry)) into (adde trunc(X), trunc(Y), Carry),
if adde is not legal for the target. Even it's at type-legalize phase.
Because adde is special and will not be legalized at operation-legalize phase later.
This fixes: PR40922
https://bugs.llvm.org/show_bug.cgi?id=40922
Differential Revision: https://reviews.llvm.org//D60854
llvm-svn: 359532
Summary:
This patch adds support for __builtin_dcbf for PPC.
__builtin_dcbf copies the contents of a modified block from the data cache
to main memory and flushes the copy from the data cache.
Differential revision: https://reviews.llvm.org/D59843
llvm-svn: 359517
Change the PPCISelLowering.cpp function that decides to avoid update form in
favor of partial vector loads to know about newer load types and to not be
confused by the chain operand.
Differential Revision: https://reviews.llvm.org/D60102
llvm-svn: 359504
Summary:
Targets like ARM, MSP430, PPC, and SystemZ have complex behavior when
printing the address of a MachineOperand::MO_GlobalAddress. Move that
handling into a new overriden method in each base class. A virtual
method was added to the base class for handling the generic case.
Refactors a few subclasses to support the target independent %a, %c, and
%n.
The patch also contains small cleanups for AVRAsmPrinter and
SystemZAsmPrinter.
It seems that NVPTXTargetLowering is possibly missing some logic to
transform GlobalAddressSDNodes for
TargetLowering::LowerAsmOperandForConstraint to handle with "i" extended
inline assembly asm constraints.
Fixes:
- https://bugs.llvm.org/show_bug.cgi?id=41402
- https://github.com/ClangBuiltLinux/linux/issues/449
Reviewers: echristo, void
Reviewed By: void
Subscribers: void, craig.topper, jholewinski, dschuff, jyknight, dylanmckay, sdardis, nemanjai, javed.absar, sbc100, jgravelle-google, eraman, kristof.beyls, hiraditya, aheejin, kbarton, fedor.sergeev, jrtc27, atanasyan, jsji, llvm-commits, kees, tpimh, nathanchance, peter.smith, srhines
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D60887
llvm-svn: 359337
Using initial-exec TLS variables is a reasonable performance
optimisation for system libraries. Use the correct PIC mechanism to get
hold of the GOT to avoid text relocations.
Differential Revision: https://reviews.llvm.org/D61026
llvm-svn: 359146
Summary:
This issue from the bugzilla: https://bugs.llvm.org/show_bug.cgi?id=41177
When the two operands for BUILD_VECTOR are same, we will get assert error.
llvm::SDValue combineBVOfConsecutiveLoads(llvm::SDNode*, llvm::SelectionDAG&):
Assertion `!(InputsAreConsecutiveLoads && InputsAreReverseConsecutive) &&
"The loads cannot be both consecutive and reverse consecutive."' failed.
This error caused by the wrong ElemSIze when calling isConsecutiveLS(). We
should use `getScalarType().getStoreSize();` to get the ElemSize instread of
`getScalarSizeInBits() / 8`.
Reviewed By: jsji
Differential Revision: https://reviews.llvm.org/D60811
llvm-svn: 358644
Summary:
None of these derived classes do anything that the base class cannot.
If we remove these case statements, then the base class can handle them
just fine.
Reviewers: peter.smith, echristo
Reviewed By: echristo
Subscribers: nemanjai, javed.absar, eraman, kristof.beyls, hiraditya, kbarton, jsji, llvm-commits, srhines
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D60803
llvm-svn: 358603
Summary:
Some llc debug options need pass-name as the parameters.
But if we use the pass-name ppc-early-ret, we will get below error:
llc test.ll -stop-after ppc-early-ret
LLVM ERROR: "ppc-early-ret" pass is not registered.
Below pass-names have the pass is not registered error:
ppc-ctr-loops
ppc-ctr-loops-verify
ppc-loop-preinc-prep
ppc-toc-reg-deps
ppc-vsx-copy
ppc-early-ret
ppc-vsx-fma-mutate
ppc-vsx-swaps
ppc-reduce-cr-ops
ppc-qpx-load-splat
ppc-branch-coalescing
ppc-branch-select
Reviewed By: jsji
Differential Revision: https://reviews.llvm.org/D60248
llvm-svn: 358271
Summary:
Some llc debug options need pass-name as the parameters.
But if we use the pass-name ppc-early-ret, we will get below error:
llc test.ll -stop-after ppc-early-ret
LLVM ERROR: "ppc-early-ret" pass is not registered.
Below pass-names have the pass is not registered error:
ppc-ctr-loops
ppc-ctr-loops-verify
ppc-loop-preinc-prep
ppc-toc-reg-deps
ppc-vsx-copy
ppc-early-ret
ppc-vsx-fma-mutate
ppc-vsx-swaps
ppc-reduce-cr-ops
ppc-qpx-load-splat
ppc-branch-coalescing
ppc-branch-select
Reviewed By: jsji
Differential Revision: https://reviews.llvm.org/D60248
llvm-svn: 358256
There are 3 operands of maddld, (add (mul %1, %2), %3) and sometimes
they are constant. If there is constant operand, it takes extra li to
materialize the operand, and one more extra register too. So it's not
profitable to use maddld to optimize mul-add pattern.
Differential Revision: https://reviews.llvm.org/D60181
llvm-svn: 358253
Certain optimisations from ConstantHoisting and CGP rely on Selection DAG not
seeing through to the constant in other blocks. Revert this patch while we come
up with a better way to handle that.
I will try to follow this up with some better tests.
llvm-svn: 358113
Summary:
Teach SelectionDAG how to compute known bits of ISD::CopyFromReg if
the virtual reg used has one def only.
This can be particularly useful when calling isBaseWithConstantOffset()
with the ISD::CopyFromReg argument, as more optimizations may get enabled
in the result.
Also add a missing truncation on X86, found by testing of this patch.
Change-Id: Id1c9fceec862d118c54a5b53adf72ada5d6daefa
Reviewers: bogner, craig.topper, RKSimon
Reviewed By: RKSimon
Subscribers: lebedev.ri, nemanjai, jvesely, nhaehnle, javed.absar, jsji, jdoerfert, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D59535
llvm-svn: 357745
Summary:
Nodes that have no uses are eventually pruned when they are selected
from the worklist. Record nodes newly added to the worklist or DAG and
perform pruning after every combine attempt.
Reviewers: efriedma, RKSimon, craig.topper, spatel, jyknight
Reviewed By: jyknight
Subscribers: jdoerfert, jyknight, nemanjai, jvesely, nhaehnle, javed.absar, hiraditya, jsji, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D58070
llvm-svn: 357283
Summary:
PowerPC64/PowerPC64le supports the builtin function __builtin_setrnd to set the floating point rounding mode. This function will use the least significant two bits of integer argument to set the floating point rounding mode.
double __builtin_setrnd(int mode);
The effective values for mode are:
0 - round to nearest
1 - round to zero
2 - round to +infinity
3 - round to -infinity
Note that the mode argument will modulo 4, so if the int argument is greater than 3, it will only use the least significant two bits of the mode. Namely, builtin_setrnd(102)) is equal to builtin_setrnd(2).
Reviewed By: jsji
Differential Revision: https://reviews.llvm.org/D59405
llvm-svn: 357241
A shift and add/sub sequence combination is faster in place of a multiply by constant.
Because the cycle or latency of multiply is not huge, we only consider such following
worthy patterns.
```
(mul x, 2^N + 1) => (add (shl x, N), x)
(mul x, -(2^N + 1)) => -(add (shl x, N), x)
(mul x, 2^N - 1) => (sub (shl x, N), x)
(mul x, -(2^N - 1)) => (sub x, (shl x, N))
```
And the cycles or latency is subtarget-dependent so that we need consider the
subtarget to determine to do or not do such transformation.
Also data type is considered for different cycles or latency to do multiply.
Differential Revision: https://reviews.llvm.org/D58950
llvm-svn: 357233
The UseVSXReg flag can be safely removed and the code cleaned up.
Patch By: Yi-Hong Liu
Differential Revision: https://reviews.llvm.org/D58685
llvm-svn: 357028
Various SelectionDAG non-combine operations (e.g. the getNode smart
constructor and legalization) may leave dangling nodes by applying
optimizations or not fully pruning unused result values. This can
result in nodes that are never added to the worklist and therefore can
not be pruned.
Add a node inserter as the current node deleter to make sure such
nodes have the chance of being pruned.
Many minor changes, mostly positive.
llvm-svn: 356996
The 2nd loop calculates spill costs but reports free registers as cost
0 anyway, so there is little benefit from having a separate early
loop.
Surprisingly this is not NFC, as many register are marked regDisabled
so the first loop often picks up later registers unnecessarily instead
of the first one available in the allocation order...
Patch by Matthias Braun
llvm-svn: 356499
Summary:
A number of optimizations are inhibited by single-use TokenFactors not
being merged into the TokenFactor using it. This makes we consider if
we can do the merge immediately.
Most tests changes here are due to the change in visitation causing
minor reorderings and associated reassociation of paired memory
operations.
CodeGen tests with non-reordering changes:
X86/aligned-variadic.ll -- memory-based add folded into stored leaq
value.
X86/constant-combiners.ll -- Optimizes out overlap between stores.
X86/pr40631_deadstore_elision -- folds constant byte store into
preceding quad word constant store.
Reviewers: RKSimon, craig.topper, spatel, efriedma, courbet
Reviewed By: courbet
Subscribers: dylanmckay, sdardis, nemanjai, jvesely, nhaehnle, javed.absar, eraman, hiraditya, kbarton, jrtc27, atanasyan, jsji, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D59260
llvm-svn: 356068
Vector imm setting instructions like XXLXORz/XXLXORspz/XXLXORdpz
Should behave like LI8.
We should set corresponding flags to allow rematerialization and other
opts in LICM, RA, Scheduling etc.
Differential Revision: https://reviews.llvm.org/D58645
llvm-svn: 355948
In file PPCBranchSelector.cpp we tend to over estimate code size due to large
alignment and inline assembly. Usually it causes larger computed branch offset,
it is not big problem. But sometimes it may also causes smaller computed branch
offset than actual branch offset. If the offset is close to the limit of
encoding, it may cause problem at run time.
Following is a simplified example.
actual estimated
address address
...
bne Far 100 10c
.p2align 4
Near: 110 110
...
Far: 8108 8108
Actual offset: 0x8108 - 0x100 = 0x8008
Computed offset: 0x8108 - 0x10c = 0x7ffc
The computed offset is at most ((1 << alignment) - 4) bytes smaller than actual
offset. So we add this number to the offset for safety.
Differential Revision: https://reviews.llvm.org/D57718
llvm-svn: 355529
Move the stdu instruction in the prologue and epilogue.
This should provide a small performance boost in functions that are able to do
this. I've kept this change rather conservative at the moment and functions
with frame pointers or base pointers will not try to move the stack pointer
update.
Differential Revision: https://reviews.llvm.org/D42590
llvm-svn: 355085
Summary:
Turns out the test was not correct, I had to adjust the test to work. I
also added CHECK-LABELs for better error messages from FileCheck while
I'm here.
Reviewers: jsji
Subscribers: nemanjai, eraman, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D58614
llvm-svn: 355079
Summary:
Fast selection of llvm fptoi & fptrunc instructions is not handled well about
VSX instruction support.
We'd use VSX float convert integer instruction instead of non-vsx float convert
integer instruction if the operand register class is VSSRC or VSFRC because i32
and i64 are mapped to VSSRC and VSFRC correspondingly if VSX feature is
openeded.
For float trunc instruction, we do this silimar work like float convert integer
instruction to try to use VSX instruction.
Reviewed By: jsji
Differential Revision: https://reviews.llvm.org/D58430
llvm-svn: 354762
Added four test files to check the existing behaviour of prologue
and epilogue code generation. This patch was done as a setup for
the upcoming patch listed on Phabricator that will change how the
prologue and epilogue work.
The upcoming patch is: https://reviews.llvm.org/D42590
llvm-svn: 353994
If we're comparing some value for equality against 2 constants
and those constants have an absolute difference of just 1 bit,
then we can offset and mask off that 1 bit and reduce to a single
compare against zero:
and/or (setcc X, C0, ne), (setcc X, C1, ne/eq) -->
setcc ((add X, -C1), ~(C0 - C1)), 0, ne/eq
https://rise4fun.com/Alive/XslKj
This transform is disabled by default using a TLI hook
("convertSetCCLogicToBitwiseLogic()").
That should be overridden for AArch64, MIPS, Sparc and possibly
others based on the asm shown in:
https://bugs.llvm.org/show_bug.cgi?id=40611
llvm-svn: 353859
Kai Luo