Summary:
With the last round of refactors, supporting type units in dwo files
becomes almost trivial. This patch contains a couple of small fixes,
which taken as a whole make type units work in the split dwarf scenario
(both DWARF4 and DWARF5):
- DWARFContext: make sure we actually read the debug_types.dwo section
- DWARFUnit: set string offsets base on all units in the dwo file, not
just the main CU
- ManualDWARFIndex: index all units in the file
- SymbolFileDWARFDwo: Search for the single compile unit in the file, as
we can no longer assume it will be the first one
The last part makes it obvious that there is still some work to be done
here, namely that we do not support dwo files with multiple compile
units. That is something that should be easier after the DIERef
refactors, but it still requires more work.
Tests are added for the type units+split dwarf + dwarf4/5 scenarios, as
well as a test that checks we behave reasonably in the presence of dwo
files with multiple CUs.
Reviewers: clayborg, JDevlieghere, aprantl
Subscribers: arphaman, lldb-commits
Differential Revision: https://reviews.llvm.org/D63643
llvm-svn: 364274
Summary:
When dwo support was introduced, it used a trick where debug info
entries were referenced by the offset of the compile unit in the main
file, but the die offset was relative to the dwo file. Although there
was some elegance to it, this representation was starting to reach its
breaking point:
- the fact that the skeleton compile unit owned the DWO file meant that
it was impossible (or at least hard and unintuitive) to support DWO
files containing more than one compile unit. These kinds of files are
produced by LTO for example.
- it made it impossible to reference any DIEs in the skeleton compile
unit (although the skeleton units are generally empty, clang still
puts some info into them with -fsplit-dwarf-inlining).
- (current motivation) it made it very hard to support type units placed
in DWO files, as type units don't have any skeleton units which could
be referenced in the main file
This patch addresses this problem by introducing an new
"dwo_num" field to the DIERef class, whose purpose is to identify the
dwo file. It's kind of similar to the dwo_id field in DWARF5 unit
headers, but while this is a 64bit hash whose main purpose is to catch
file mismatches, this is just a smaller integer used to indentify a
loaded dwo file. Currently, this is based on the index of the skeleton
compile unit which owns the dwo file, but it is intended to be
eventually independent of that (to support the LTO use case).
Simultaneously the cu_offset is dropped to conserve space, as it is no
longer necessary. This means we can remove the "BaseObjectOffset" field
from the DWARFUnit class. It also means we can remove some of the
workarounds put in place to support the skeleton-unit+dwo-die combo.
More work is needed to remove all of them, which is out of scope of this
patch.
Reviewers: JDevlieghere, clayborg, aprantl
Subscribers: mehdi_amini, dexonsmith, arphaman, lldb-commits
Differential Revision: https://reviews.llvm.org/D63428
llvm-svn: 364009
Summary:
Type units don't represent actual compilations and a lot of the
operations that we do with lldb compile units (getting their line
tables, variables, etc.) don't make sense for them. There is also a lot
more of them (sometimes over 100x), so making them more lightweight pays
off.
The main change in this patch is that we stop creating lldb CompileUnits
for DWARF type units. The trickiest part here is that the SymbolFile
interface requires that we assign consecutive sequence IDs to the
compile units we create. As DWARF type and compile units can come in any
order (in v5), this means we can no longer use 1-1 mapping between DWARF
and lldb compile units. Instead I build a translation table between the
two indices. To avoid pessimizing the case where there are no type
units, I build the translation table only in case we have at least one
type unit.
Additionaly, I also tried to strenghted type safete by replacing
DWARFUnit with DWARFCompileUnit where applicable. Though that was not
stricly necessary, I found it a good way to ensure that the
transformations I am doing here make sense. In the places where I was
changing the function signatures, and where it was obvious that the
objects being handled were not null, I also replaced pointers with
references.
There shouldn't be any major functional change with this patch. The only
change I observed is that now the types in the type units will not be
parsed when one calls Module::ParseAllDebugSymbols, unless they are
referenced from other compile units. This makes sense, given how
ParseAllDebugSymbols is implemented (it iterates over all compile
units), and it only matters for one hand-writted test where I did not
bother to reference the types from the compile units (which I now do).
Reviewers: clayborg, JDevlieghere, aprantl
Subscribers: jdoerfert, lldb-commits
Differential Revision: https://reviews.llvm.org/D63005
llvm-svn: 363250
Summary:
This patch creates a cache of file lists in line tables referenced by
type units. This cache is used to avoid parsing a line table twice
(since a file list will generally be shared by many type units).
It also sets things up in a way that parsing of DW_AT_decl_file
attributes will keep working even when we stop creating lldb compile
units for dwarf type units, but it stops short of actually doing that.
This means that the request for files now go directly to SymbolFileDWARF
instead of being routed there indirectly via the
lldb_private::CompileUnit class.
As a result of this, a number of occurences of SymbolContext variables
in DWARFASTParserClang have become unused, so I remove them.
This patch reduces the number of times a file list is being parsed, but
the situation is still suboptimal, as the parsed list is being copied
multiple times. This will be fixed when we stop creating CompileUnits
for DWARF type units.
Reviewers: clayborg, aprantl, JDevlieghere
Subscribers: jdoerfert, lldb-commits
Differential Revision: https://reviews.llvm.org/D62894
llvm-svn: 363143
Summary:
r362103 exposed a bug, where we could read incorrect data if a skeleton
unit contained more than the single unit DIE. Clang emits these kinds of
units with -fsplit-dwarf-inlining (which is also the default).
Changing lldb to handle these DIEs is nontrivial, as we'd have to change
the UID encoding logic to be able to reference these DIEs, and fix up
various places which are assuming that all DIEs come from the separate
compile unit.
However, it turns out this is not necessary, as the DWO unit contains
all the information that the skeleton unit does. So, this patch just
skips parsing the extra DIEs if we have successfully found the DWO file.
This enforces the invariant that the rest of the code is already
operating under.
This patch fixes a couple of existing tests, but I've also included a
simpler test which does not depend on execution of binaries, and would
have helped us in catching this sooner.
Reviewers: clayborg, JDevlieghere, aprantl
Subscribers: probinson, dblaikie, lldb-commits
Differential Revision: https://reviews.llvm.org/D62852
llvm-svn: 362586
Summary:
debug_ranges got renamed to debug_rnglists in DWARF 5. Prior to this
patch lldb was just picking the first section it could find in the file,
and using that for all address ranges lookups. This is not correct in
case the file contains a mixture of compile units with various standard
versions (not a completely unlikely scenario).
In this patch I make lldb support reading from both sections
simulaneously, and decide the correct section to use based on the
version number of the compile unit. SymbolFileDWARF::DebugRanges is
split into GetDebugRanges and GetDebugRngLists (the first one is renamed
mainly so we can catch all incorrect usages).
I tried to structure the code similarly to how llvm handles this logic
(hence DWARFUnit::FindRnglistFromOffset/Index), but the implementations
are still relatively far from each other.
Reviewers: JDevlieghere, aprantl, clayborg
Subscribers: lldb-commits
Differential Revision: https://reviews.llvm.org/D62302
llvm-svn: 361938
Summary:
Previous patch (r360409) introduced the "symbol file unwind plan"
concept, but that plan wasn't used for unwinding yet. With this patch,
we start to consider the new plan as a possible strategy for both
synchronous and asynchronous unwinding. I also add a test that asserts
that unwinding via breakpad STACK CFI info works end-to-end.
Reviewers: jasonmolenda, clayborg
Subscribers: lldb-commits, amccarth, markmentovai
Differential Revision: https://reviews.llvm.org/D61853
llvm-svn: 361618
Summary:
This patch implements the main feature of type units. When completing a
type, if we encounter a DW_AT_signature attribute, we use it's value to
lookup the complete definition of the type in the relevant type unit.
To enable this lookup, we build up a map of all type units in a symbol
file when parsing the units. Then we consult this map when resolving the
DW_AT_signature attribute.
I include add a couple of tests which exercise the type lookup feature,
including one that ensure we do something reasonable in case we fail to
lookup the type.
A lot of the ideas in this patch have been taken from D32167 and D61505.
Reviewers: clayborg, JDevlieghere, aprantl, alexshap
Subscribers: mgrang, lldb-commits
Differential Revision: https://reviews.llvm.org/D62246
llvm-svn: 361603
Summary:
SymbolFileDWARF used to load debug sections in a thread-safe manner.
When we moved to DWARFContext, we dropped the thread-safe part, because
we thought it was not necessary.
It turns out this was only mostly correct.
The "mostly" part is there because this is a problem only if we use the
manual index, as that is the only source of intra-module paralelism.
Also, this only seems to occur for extremely simple files (like the ones
I've been creating for tests lately), where we've managed to start
indexing before loading the debug_str section. Then, two threads start
to load the section simultaneously and produce wrong results.
On more complex files, something seems to be loading the debug_str section
before we start indexing, as I haven't been able to reproduce this
there, but I have not investigated what it is.
I've tried to come up with a test for this, but I haven't been able to
reproduce the problem reliably. Still, while doing so, I created a way
to generate many compile units on demand. Given that most of our tests
work with only one or two compile units, it seems like this could be
useful anyway.
Reviewers: aprantl, JDevlieghere, clayborg
Subscribers: arphaman, lldb-commits
Differential Revision: https://reviews.llvm.org/D62316
llvm-svn: 361602
Summary:
Type units don't describe any code, so they should never be the result
of any address lookup queries.
Previously, we would compute the address ranges for the type units for
via the line tables they reference because the type units looked a lot
like line-tables-only compile units. However, this is not correct, as
the line tables are only referenced from type units so that other
declarations can use the file names contained in them.
In this patch I make the BuildAddressRangeTable function virtual, and
implement it only for compile units.
Testing this was a bit tricky, because the behavior depends on the order
in which we add things to the address range map. This rarely caused a
problem with DWARF v4 type units, as they are always added after all
CUs. It happened more frequently with DWARF v5, as there clang emits the
type units first. However, this is still not something that it is
required to do, so for testing I've created an assembly file where I've
deliberately sandwiched a compile unit between two type units, which
should isolate us from both changes in how the compiler emits the units
and changes in the order we process them.
Reviewers: clayborg, aprantl, JDevlieghere
Subscribers: jdoerfert, lldb-commits
Differential Revision: https://reviews.llvm.org/D62178
llvm-svn: 361465
.debug_ranges parsing is not well tested [citation needed] because this
section tends to be only used in optimized code, and we don't build
optimized executables in our tests, as they produce unpredictable
results.
This patch aims to add some very simple tests for parsing static range
data, which can serve as a first line of defense in case things break.
I also include one XFAILed test, which demonstrates that we don't
correctly handle mixed DWARF v5 and v4 ranges in a single file.
llvm-svn: 361373
Summary:
This patch introduces the DWARFTypeUnit class, and teaches lldb to parse
type units out of both the debug_types section (DWARF v4), and from the
regular debug_info section (DWARF v5).
The most important piece of functionality - resolving DW_AT_signatures
to connect type forward declarations to their definitions - is not
implemented here, but even without that, a lot of functionality becomes
available. I've added tests for the commands that start to work after
this patch.
The changes in this patch were greatly inspired by D61505, which in turn took
over changes from D32167.
Reviewers: JDevlieghere, clayborg, aprantl
Subscribers: mgorny, jankratochvil, lldb-commits
Differential Revision: https://reviews.llvm.org/D62008
llvm-svn: 361360
Summary:
There are several reasons for doing this:
- generally, there's no reason to differentiate between a section being
absent and it being present, but empty
- it matches more closely what llvm DWARF parser is doing (which also
doesn't differentiate the two cases)
- SymbolFileDWARF also doesn't differentiate the two cases, which makes
porting the rest of sections easier
- it fixes a bug in how the return-null-if-empty logic was implemented
(it returned nullptr only the second time we tried to get the
debug_aranges section), which meant that we hit an assert when trying
to parse an empty-but-present section
Reviewers: JDevlieghere, clayborg, aprantl
Subscribers: zturner, lldb-commits
Differential Revision: https://reviews.llvm.org/D61942
llvm-svn: 360874
Summary:
This patch adds the ability to precisely address debug info in
situations when a single file can have more than one debug-info-bearing
sections (as is the case with type units in DWARF v4).
The changes here can be classified into roughly three categories:
- the code which addresses a debug info by offset gets an additional
argument, which specifies the section one should look into.
- the DIERef class also gets an additional member variable specifying
the section. This way, code dealing with DIERefs can know which
section is the object referring to.
- the user_id_t encoding steals one bit from the dwarf_id field to store
the section. This means the total number of separate object files
(apple .o, or normal .dwo) is limited to 2 billion, but that is fine
as it's not possible to hit that number without switching to DWARF64
anyway.
This patch is functionally equivalent to (and inspired by) the two
patches (D61503 and D61504) by Jan Kratochvil, but there are differences
in the implementation:
- it uses an enum instead of a bool flag to differentiate the sections
- it increases the size of DIERef struct instead of reducing the amount
of addressable debug info
- it sets up DWARFDebugInfo to store the units in a single vector
instead of two. This sets us up for the future in which type units can
also live in the debug_info section, and I believe it's cleaner
because there's no need for unit index remapping
There are no tests with this patch as this is essentially NFC until
we start parsing type units from the debug_types section.
Reviewers: JDevlieghere, clayborg, aprantl
Subscribers: arphaman, jankratochvil, lldb-commits
Differential Revision: https://reviews.llvm.org/D61908
llvm-svn: 360872
Summary:
This patch implements the GetUnwindPlan interface (added in the previous
patch) for SymbolFileBreakpad, and uses it to generate unwind plans from
STACK CFI records in breakpad files.
We first perform a light-weight parse of the breakpad in order to build
up a map of regions covered by the unwind info so that we can later jump
to the right record when we need to unwind a specific function.
The actual parsing is relatively straight-forward, as the STACK CFI records
are just another (text) form of the eh_frame unwind instructions, and
the same goes for lldb's UnwindPlans. The newly-introduced
PostfixExpression API is used to convert the breakpad postfix
expressions into DWARF. The generated dwarf expressions are stored in a
BumpPtrAllocator, as the UnwindPlan does not take ownership of the
expression data it references (usually this is static data in an object
file, so special ownership is needed).
At this moment the generated unwind plans aren't used in the actual
unwind machinery (only in the image show-unwind command), but that is
coming in a separate patch.
Reviewers: amccarth, clayborg, markmentovai
Subscribers: aprantl, jasonmolenda, lldb-commits
Differential Revision: https://reviews.llvm.org/D61733
llvm-svn: 360574
Summary:
This patch implements missing case in PdbAstBuilder::CreateType for
LF_MFUNCTION. This is necessary, for example, in stack unwinding of struct
methods.
Reviewers: amccarth, aleksandr.urakov
Reviewed By: amccarth
Subscribers: abidh, teemperor, lldb-commits, leonid.mashinskiy
Differential Revision: https://reviews.llvm.org/D61128
llvm-svn: 360569
Summary:
This patch adds anonymous namespaces support to the native PDB plugin.
I had to reference from the main function variables of the types that are inside
of the anonymous namespace to include them in debug info. Without the references
they are not included. I think it's because they are static, then are visible
only in the current translation unit, so they are not needed without any
references to them.
There is also the problem case with variables of types that are nested in
template structs. For now I've left FIXME in the test because this case is not
related to the change.
Reviewers: zturner, asmith, labath, stella.stamenova, amccarth
Reviewed By: amccarth
Subscribers: zloyrobot, aprantl, teemperor, lldb-commits, leonid.mashinskiy
Tags: #lldb
Differential Revision: https://reviews.llvm.org/D60817
llvm-svn: 358873
Do not use -nostdlib in target-symbols-add-unwind.test. NetBSD uses
startup files to provide obligatory ELF notes in executables,
and therefore using -nostdlib requires providing specially tailored
input. Otherwise, kernel rejects the result as invalid executable.
The replacement was suggested by Pavel Labath.
Differential Revision: https://reviews.llvm.org/D60648
llvm-svn: 358329
Summary:
This is a preparatory step to enable adding of unwind plans by symbol
file plugins.
Although at the surface it seems that currently symbol files have
nothing to do with unwinding, this isn't entirely correct even now. The
mere act of adding a symbol file can have the effect of making more
sections (typically .debug_frame) available to the unwinding machinery,
so that it can have more unwind strategies to choose from.
Up until now, we've had a bug, which went largely unnoticed, where
unwind info in the manually added symbols files (target symbols add) was
being ignored during unwinding. Reinitializing the UnwindTable fixes
that bug too.
Reviewers: clayborg, jasonmolenda, alexshap
Subscribers: jdoerfert, lldb-commits
Differential Revision: https://reviews.llvm.org/D58347
llvm-svn: 356361
Adjust the XFAIL-ing tests to match consistent results from buildbot.
I'm going to work on differences between them and my local results
following this.
llvm-svn: 355774
Summary: DW_OP_GNU_addr_index has been renamed as DW_OP_addrx in the standard. clang produces DW_OP_addrx tags and with this change lldb starts to process them.
Reviewers: aprantl, jingham, davide, clayborg, serge-sans-paille
Reviewed By: aprantl
Subscribers: jdoerfert, dblaikie, labath, shafik, lldb-commits
Tags: #lldb
Differential Revision: https://reviews.llvm.org/D59004
llvm-svn: 355629
Add a convenience 'expectedFailureNetBSD' decorator and mark all tests
currently failing on NetBSD with it. Also skip a few tests that hang
the test suite. This should establish a baseline for the test suite
and get us closer to enabling tests on buildbot. This will help us
catch regressions while we still have a lot of work to do to get tests
working.
It seems that there are also some flaky tests. I am going to address
them later on.
Differential Revision: https://reviews.llvm.org/D58527
llvm-svn: 355320
Summary:
This patch makes virtual bases to be added in the correct order to the bases
list. It is important because `VTableContext` (`MicrosoftVTableContext` in our
case) uses then the order of virtual bases in the list to restore the virtual
table indexes. These indexes are used then to resolve the layout of the virtual
bases.
We haven't enough information about offsets of virtual bases regarding to the
object (moreover, in a common case we can't rely on such information, see the
example here: https://reviews.llvm.org/D53506#1272306 ), but there should be
enough information to restore the layout of the virtual bases from the indexes
in runtime. After D53506 this information is used whenever possible, so there
should be no problems with virtual bases' fields reading.
Reviewers: zturner, rnk, stella.stamenova
Subscribers: abidh, teemperor, lldb-commits
Tags: #lldb
Differential Revision: https://reviews.llvm.org/D56904
llvm-svn: 353806
Summary:
This adds support for auto-detection of path style to SymbolFileBreakpad
(similar to how r351328 did the same for DWARF). We guess each file
entry separately, as we have no idea which file came from which compile
units (and different compile units can have different path styles). The
breakpad generates should have already converted the paths to absolute
ones, so this guess should be reasonable accurate, but as always with
these kinds of things, it is hard to give guarantees about anything.
In an attempt to bring some unity to the path guessing logic, I move the
guessing logic from inside SymbolFileDWARF into the FileSpec class and
have both symbol files use it to implent their desired behavior.
Reviewers: clayborg, lemo, JDevlieghere
Subscribers: aprantl, markmentovai, lldb-commits
Differential Revision: https://reviews.llvm.org/D57895
llvm-svn: 353702
The tests are failing on windows because the paths in the symbol file
are parsed using the host path style. I'm working on a patch to have
SymbolFileBreakpad auto-detect the correct path style (similar to dwarf
r351328).
I originally wanted to make this a part of the initial line-table patch,
but then I simply forgot.
llvm-svn: 353410
Summary:
This patch teaches SymbolFileBreakpad to parse the line information in
breakpad files and present it to lldb.
The trickiest question here was what kind of "compile units" to present
to lldb, as there really isn't enough information in breakpad files to
correctly reconstruct those.
A couple of options were considered
- have the entire file be one compile unit
- have one compile unit for each FILE record
- have one compile unit for each FUNC record
The main drawback of the first approach is that all of the files would
be considered "headers" by lldb, and so they wouldn't be searched if
target.inline-breakpoint-strategy=never. The single compile unit would
also be huge, and there isn't a good way to name it.
The second approach will create mostly correct compile units for cpp
files, but it will still be wrong for headers. However, the biggest
drawback here seemed to be the fact that this can cause a compile unit
to change mid-function (for example when a function from another file is
inlined or another file is #included into a function). While I don't
know of any specific thing that would break in this case, it does sound
like a thing that we should avoid.
In the end, we chose the third option, as it didn't seem to have any
major disadvantages, though it was not ideal either. One disadvantage
here is that this generates a large number of compile units, and there
is still a question on how to name it. We chose to simply name it after
the first line record in that function. This should be correct 99.99% of
the time, though it can produce somewhat strange results if the very
first line record comes from an #included file.
Reviewers: clayborg, zturner, lemo, markmentovai
Subscribers: lldb-commits
Differential Revision: https://reviews.llvm.org/D56595
llvm-svn: 353404
stored relative to VFRAME
Summary:
This patch makes LLDB able to retrieve proper values for function arguments and
local variables stored in PDB relative to VFRAME register.
Patch contains retrieval of corresponding FPO table entries from PDB and a
generic translator from FPO programs to DWARF expressions to get correct VFRAME
value.
Patch also improves variables-locations.test and makes this test passable on
x86.
Patch By: leonid.mashinsky
Reviewers: zturner, asmith, stella.stamenova, aleksandr.urakov
Reviewed By: zturner
Subscribers: arphaman, labath, mgorny, aprantl, JDevlieghere, lldb-commits
Tags: #lldb
Differential Revision: https://reviews.llvm.org/D55122
llvm-svn: 352845
Summary:
This patch adds the basic support of methods reconstruction by native PDB
plugin. It contains only most obvious changes (it processes LF_ONEMETHOD and
LF_METHOD records), some things still remain unsolved:
- mangled names retrieving;
- support of template methods.
Reviewers: zturner, labath, lemo, stella.stamenova
Reviewed by: zturner
Differential Revision: https://reviews.llvm.org/D56126
llvm-svn: 352464
This patch extends SymbolFileBreakpad::AddSymbols to include the symbols
from the FUNC records too. These symbols come from the debug info and
have a size associated with them, so they are given preference in case
there is a PUBLIC record for the same address.
To achieve this, I first pre-process the symbols into a temporary
DenseMap, and then insert the uniqued symbols into the module's symtab.
Reviewers: clayborg, lemo, zturner
Reviewed By: clayborg
Subscribers: lldb-commits
Differential Revision: https://reviews.llvm.org/D56590
llvm-svn: 351781
This reapplies commit r351330, which was reverted due to a failing test on
macos. The failure was because the SymbolVendor used on MacOS was stricter than
the default (or ELF) symbol vendor, and rejected the symbol file because it's
UUID did not match the object file.
This version of the patch adds a uuid load command to the test macho file to
make sure the UUIDs match.
llvm-svn: 351447
This reapplies r350802, which was reverted because of issues with
parsing posix-style paths on windows hosts (and vice-versa). These have
since been fixed in r351328, and lldb should now recognise the path
style used in a dwarf compile unit correctly.
llvm-svn: 351435
This patch changes the behavior when printing C++ function references:
where we previously would get a <could not determine size>, there is
now a <no summary available>. It's not clear to me whether this is a
bug or an omission, but it's one step further than LLDB previously
got.
Differential Revision: https://reviews.llvm.org/D56798
llvm-svn: 351376
In this test we have deliberately removed all information which may hint
at the correct path style, so we cannot assert that lldb uses a
particular style. Instead, we should just check that it does something
vaguely reasonable.
llvm-svn: 351359
Summary:
Adding a breakpad symbol file to an existing MachO module with "target symbols
add" currently works only if one's host platform is a mac. This is
because SymbolVendorMacOSX (which is the one responsible for loading
symbols for MachO files) is conditionally compiled for the mac platform.
While we will sooner or later have a special symbol vendor for breakpad
files (to enable more advanced searching), and so this flow could be
made to work through that, it's not clear to me whether this should be a
requirement for the "target symbols add" flow to work. After all, since
the user has explicitly specified the symbol file to use, the symbol
vendor plugin's job is pretty much done.
This patch teaches the default symbol vendor to respect module's symbol
file spec, and load the symbol from that file if it is specified (and no
plugin requests any special handling).
Reviewers: clayborg, zturner, lemo
Subscribers: lldb-commits
Differential Revision: https://reviews.llvm.org/D56589
llvm-svn: 351330
Summary:
If we opened a file which was produced on system with different path
syntax, we would parse the paths from the debug info incorrectly.
The reason for that is that we would parse the paths as they were
native. For example this meant that on linux we would treat the entire
windows path as a single file name with no directory component, and then
we would concatenate that with the single directory component from the
DW_AT_comp_dir attribute. When parsing posix paths on windows, we would
at least get the directory separators right, but we still would treat
the posix paths as relative, and concatenate them where we shouldn't.
This patch attempts to remedy this by guessing the path syntax used in
each compile unit. (Unfortunately, there is no info in DWARF which would
give the definitive path style used by the produces, so guessing is all
we can do.) Currently, this guessing is based on the DW_AT_comp_dir
attribute of the compile unit, but this can be refined later if needed
(for example, the DW_AT_name of the compile unit may also contain some
useful info). This style is then used when parsing the line table of
that compile unit.
This patch is sufficient to make the line tables come out right, and
enable breakpoint setting by file name work correctly. Setting a
breakpoint by full path still has some kinks (specifically, using a
windows-style full path will not work on linux because the path will be
parsed as a linux path), but this will require larger changes in how
breakpoint setting works.
Reviewers: clayborg, zturner, JDevlieghere
Subscribers: aprantl, lldb-commits
Differential Revision: https://reviews.llvm.org/D56543
llvm-svn: 351328
Jan Kratochvil