The Fast ISel has a fallback to SelectionDAGISel in case it cannot handle the instruction.
This works as follows:
Using reverse order, try to select instruction using Fast ISel, if it cannot handle instruction it fallbacks to SelectionDAGISel
for these instructions if it is a call and continue fast instruction selections.
However if unhandled instruction is not a call or statepoint related instruction it fallbacks to SelectionDAGISel for all remaining
instructions in basic block.
However gc.result instruction is missed and as a result it is possible that gc.result is processed earlier than statepoint
causing breakage invariant the gc.results should be handled after statepoint.
Test is updated because in the current form fast-isel cannot handle ret instruction (due to i1 ret type without explicit ext)
and as a result test does not check fast-isel at all.
Reviewers: reames
Reviewed By: reames
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D60182
llvm-svn: 357672
There are 3 changes to make this correspond to the same transform in instcombine:
1. Remove the legality check - we can't create anything less legal than we started with.
2. Ease the use restriction, so we only bail out if both operands have >1 use.
3. Ease the use restriction for binops with a repeated operand (eg, mul x, x).
As discussed in D60150, there's a scalarization opportunity that will be made
easier by allowing this transform more generally.
llvm-svn: 357580
Summary:
Nodes that have no uses are eventually pruned when they are selected
from the worklist. Record nodes newly added to the worklist or DAG and
perform pruning after every combine attempt.
Reviewers: efriedma, RKSimon, craig.topper, spatel, jyknight
Reviewed By: jyknight
Subscribers: jdoerfert, jyknight, nemanjai, jvesely, nhaehnle, javed.absar, hiraditya, jsji, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D58070
llvm-svn: 357283
Summary:
Various SelectionDAG non-combine operations (e.g. the getNode smart
constructor and legalization) may leave dangling nodes by applying
optimizations without fully pruning unused result values. This results
in nodes that are never added to the worklist and therefore can not be
pruned.
Add a node inserter for the combiner to make sure such nodes have the
chance of being pruned. This allows a number of additional peephole
optimizations.
Reviewers: efriedma, RKSimon, craig.topper, jyknight
Reviewed By: jyknight
Subscribers: msearles, jyknight, sdardis, nemanjai, javed.absar, hiraditya, jrtc27, atanasyan, jsji, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D58068
llvm-svn: 357279
After investigating the examples from D59777 targeting an SSE4.1 machine,
it looks like a very different problem due to how we map illegal types (256-bit in these cases).
We're missing a shuffle simplification that maps elements of a vector back to a shuffled operand.
We have a more general version of this transform in DAGCombiner::visitVECTOR_SHUFFLE(), but that
generality means it is limited to patterns with a one-use constraint, and the examples here have
2 uses. We don't need any uses or legality limitations for a simplification (no new value is
created).
It looks like we miss this pattern in IR too.
In one of the zext examples here, we have shuffle masks like this:
Shuf0 = vector_shuffle<0,u,3,7,0,u,3,7>
Shuf = vector_shuffle<4,u,6,7,u,u,u,u>
...so that's moving the high half of the 1st vector into the low half. But the high half of the
1st vector is already identical to the low half.
Differential Revision: https://reviews.llvm.org/D59961
llvm-svn: 357258
This is a sibling to rL357178 that I noticed we'd hit if we chose
an alternate transform in D59818.
%z = zext i8 %x to i32
%dec = add i32 %z, -1
%r = sext i32 %dec to i64
=>
%z2 = zext i8 %x to i64
%r = add i64 %z2, -1
https://rise4fun.com/Alive/kPP
The x86 vector diffs show a slight regression, so there's a chance
that we should limit this and the previous transform to scalars.
But given that we allowed vectors before, I'm matching that behavior
here. We should change both transforms together if that's the right
thing to do.
llvm-svn: 357254
In the example below, we would previously emit two range checks, one for cases
1--3 and one for 4--6. This patch makes us exploit the fact that the
fall-through is unreachable and only one range check is necessary.
switch i32 %i, label %default [
i32 1, label %bb1
i32 2, label %bb1
i32 3, label %bb1
i32 4, label %bb2
i32 5, label %bb2
i32 6, label %bb2
]
default: unreachable
llvm-svn: 357252
If scalar truncates are free, attempt to pre-truncate build_vectors source operands.
Only attempt to do this before legalization as we often end up with truncations/extensions during build_vector lowering.
Differential Revision: https://reviews.llvm.org/D59654
llvm-svn: 357161
When lowering a load or store for TypeWidenVector, the type legalizer
would use a single load or store if the associated integer type was legal
or promoted. E.g. it loads a v4i8 as an i32 if i32 is legal/promotable.
(See https://reviews.llvm.org/rL236528 for reference.)
This applies that behaviour to vector types. If the vector type is
TypePromoteInteger, the element type is going to be TypePromoteInteger
as well, which will lead to have a single promoting load rather than N
individual promoting loads. For instance, if we have a v3i1, we would
now have a load of v4i1 instead of 3 loads of i1.
Patch by Guillaume Marques. Thanks!
Differential Revision: https://reviews.llvm.org/D56201
llvm-svn: 357120
Split out from D59749. The current implementation of isWrappedSet()
doesn't do what it says on the tin, and treats ranges like
[X, Max] as wrapping, because they are represented as [X, 0) when
using half-inclusive ranges. This also makes it inconsistent with
the semantics of isSignWrappedSet().
This patch renames isWrappedSet() to isUpperWrapped(), in preparation
for the introduction of a new isWrappedSet() method with corrected
behavior.
llvm-svn: 357107
Rework BaseIndexOffset and isAlias to fully work with lifetime nodes
and fold in lifetime alias analysis.
This is mostly NFC.
Reviewers: courbet
Reviewed By: courbet
Subscribers: hiraditya, jdoerfert, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D59794
llvm-svn: 357070
Original commit by Ayonam Ray.
This commit adds a regression test for the issue discovered in the
previous commit: that the range check for the jump table can only be
omitted if the fall-through destination of the jump table is
unreachable, which isn't necessarily true just because the default of
the switch is unreachable.
This addresses the missing optimization in PR41242.
> During the lowering of a switch that would result in the generation of a
> jump table, a range check is performed before indexing into the jump
> table, for the switch value being outside the jump table range and a
> conditional branch is inserted to jump to the default block. In case the
> default block is unreachable, this conditional jump can be omitted. This
> patch implements omitting this conditional branch for unreachable
> defaults.
>
> Differential Revision: https://reviews.llvm.org/D52002
> Reviewers: Hans Wennborg, Eli Freidman, Roman Lebedev
llvm-svn: 357067
getAsCarry() checks that the input argument is a carry-producing node before
allowing a transformation to addcarry. This patch adds a check to make sure
that the carry-producing node is legal. If it is not, it may not remain in a
form that is manageable by the target backend. The test case caused a
compilation failure during instruction selection for this reason on SystemZ.
Patch by Ulrich Weigand.
Review: Sanjay Patel
https://reviews.llvm.org/D59822
llvm-svn: 357052
We have the folds for fadd/fsub/fmul already in DAGCombiner,
so it may be possible to remove that code if we can guarantee that
these ops are zapped before they can exist.
llvm-svn: 357029
Various SelectionDAG non-combine operations (e.g. the getNode smart
constructor and legalization) may leave dangling nodes by applying
optimizations or not fully pruning unused result values. This can
result in nodes that are never added to the worklist and therefore can
not be pruned.
Add a node inserter as the current node deleter to make sure such
nodes have the chance of being pruned.
Many minor changes, mostly positive.
llvm-svn: 356996
This helps us relax the extension of a lot of scalar elements before they are inserted into a vector.
Its exposes an issue in DAGCombiner::convertBuildVecZextToZext as some/all the zero-extensions may be relaxed to ANY_EXTEND, so we need to handle that case to avoid a couple of AVX2 VPMOVZX test regressions.
Once this is in it should be easier to fix a number of remaining failures to fold loads into VBROADCAST nodes.
Differential Revision: https://reviews.llvm.org/D59484
llvm-svn: 356989
DenseMap iteration order is not guaranteed, use MapVector instead.
Fix provided by srhines.
Differential Revision: https://reviews.llvm.org/D59807
llvm-svn: 356988
First half of PR40800, this patch adds DAG undef handling to icmp instructions to match the behaviour in llvm::ConstantFoldCompareInstruction and SimplifyICmpInst, this permits constant folding of vector comparisons where some elements had been reduced to UNDEF (by SimplifyDemandedVectorElts etc.).
This involved a lot of tweaking to reduced tests as bugpoint loves to reduce icmp arguments to undef........
Differential Revision: https://reviews.llvm.org/D59363
llvm-svn: 356938
An i16 bswap can be implemented with an i16 rotate by 8. We previously emitted
a shift and OR sequence that DAG combine should be able to turn back into
rotate. But we might as well go there directly. If rotate isn't legal,
LegalizeDAG should further legalize it to either the opposite rotate, or the
shift and OR pattern.
I don't know of any way to get the existing DAG combine reliance to fail. So
I don't know any way to add new tests for this that wouldn't have worked
previously.
llvm-svn: 356860
SDNodes can only have 64k operands and for some inputs (e.g. large
number of stores), we can reach this limit when creating TokenFactor
nodes. This patch is a follow up to D56740 and updates a few more places
that potentially can create TokenFactors with too many operands.
Reviewers: efriedma, craig.topper, aemerson, RKSimon
Reviewed By: RKSimon
Differential Revision: https://reviews.llvm.org/D59156
llvm-svn: 356668
The actual code change is fairly straight forward, but exercising it isn't. First, it turned out we weren't adding the appropriate flags in SelectionDAG. Second, it turned out that we've got some optimization gaps, so obvious test cases don't work.
My first attempt (in atomic-unordered.ll) points out a deficiency in our peephole-opt folding logic which I plan to fix separately. Instead, I'm exercising this through MachineLICM.
Differential Revision: https://reviews.llvm.org/D59375
llvm-svn: 356494
In r311255 we added a case where we split vectors whose elements are
all derived from the same input vector so that we could shuffle it
more efficiently. In doing so, createBuildVecShuffle was taught to
adjust for the fact that all indices would be based off of the first
vector when this happens, but it's possible for the code that checked
that to fire incorrectly if we happen to have a BUILD_VECTOR of
extracts from subvectors and don't hit this new optimization.
Instead of trying to detect if we've split the vector by checking if
we have extracts from the same base vector, we can just pass that
information into createBuildVecShuffle, avoiding the miscompile.
Differential Revision: https://reviews.llvm.org/D59507
llvm-svn: 356476
These changes are related to PR37743 and include:
SelectionDAGBuilder::visitSelect handles the unary SelectPatternFlavor::SPF_ABS case to build ABS node.
Delete the redundant recognizer of the integer ABS pattern from the DAGCombiner.
Add promoting the integer ABS node in the LegalizeIntegerType.
Expand-based legalization of integer result for the ABS nodes.
Expand-based legalization of ABS vector operations.
Add some integer abs testcases for different typesizes for Thumb arch
Add the custom ABS expanding and change the SAD pattern recognizer for X86 arch: The i64 result of the ABS is expanded to:
tmp = (SRA, Hi, 31)
Lo = (UADDO tmp, Lo)
Hi = (XOR tmp, (ADDCARRY tmp, hi, Lo:1))
Lo = (XOR tmp, Lo)
The "detectZextAbsDiff" function is changed for the recognition of pattern with the ABS node. Given a ABS node, detect the following pattern:
(ABS (SUB (ZERO_EXTEND a), (ZERO_EXTEND b))).
Change integer abs testcases for codegen with the ABS node support for AArch64.
Indicate that the ABS is legal for the i64 type when the NEON is supported.
Change the integer abs testcases to show changing of codegen.
Add combine and legalization of ABS nodes for Thumb arch.
Extend 'matchSelectPattern' to recognize the ABS patterns with ICMP_SGE condition.
For discussion, see https://bugs.llvm.org/show_bug.cgi?id=37743
Patch by: @ikulagin (Ivan Kulagin)
Differential Revision: https://reviews.llvm.org/D49837
llvm-svn: 356468
This allows better code size for aarch64 floating point materialization
in a future patch.
Reviewers: evandro
Differential Revision: https://reviews.llvm.org/D58690
llvm-svn: 356389
Delete temporarily constructed node uses for analysis after it's use,
holding onto original input nodes. Ideally this would be rewritten
without making nodes, but this appears relatively complex.
Reviewers: spatel, RKSimon, craig.topper
Subscribers: jdoerfert, hiraditya, deadalnix, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D57921
llvm-svn: 356382
Summary:
Look past bitcasts when looking for parameter debug values that are
described by frame-index loads in `EmitFuncArgumentDbgValue()`.
In the attached test case we would be left with an undef `DBG_VALUE`
for the parameter without this patch.
A similar fix was done for parameters passed in registers in D13005.
This fixes PR40777.
Reviewers: aprantl, vsk, jmorse
Reviewed By: aprantl
Subscribers: bjope, javed.absar, jdoerfert, llvm-commits
Tags: #debug-info, #llvm
Differential Revision: https://reviews.llvm.org/D58831
llvm-svn: 356363
AMDGPU would like to have MVTs for v3i32, v3f32, v5i32, v5f32. This
commit does not add them, but makes preparatory changes:
* Exclude non-legal non-power-of-2 vector types from ComputeRegisterProp
mechanism in TargetLoweringBase::getTypeConversion.
* Cope with SETCC and VSELECT for odd-width i1 vector when the other
vectors are legal type.
Some of this patch is from Matt Arsenault, also of AMD.
Differential Revision: https://reviews.llvm.org/D58899
Change-Id: Ib5f23377dbef511be3a936211a0b9f94e46331f8
llvm-svn: 356350
Fold (x & ~y) | y and it's four commuted variants to x | y. This pattern
can in particular appear when a vselect c, x, -1 is expanded to
(x & ~c) | (-1 & c) and combined to (x & ~c) | c.
This change has some overlap with D59066, which avoids creating a
vselect of this form in the first place during uaddsat expansion.
Differential Revision: https://reviews.llvm.org/D59174
llvm-svn: 356333
This is a subset of what was proposed in:
D59006
...and may overlap with test changes from:
D59174
...but it seems like a good general optimization to turn selects
into bitwise-logic when possible because we never know exactly
what can happen at this stage of DAG combining depending on how
the target has defined things.
Differential Revision: https://reviews.llvm.org/D59066
llvm-svn: 356332
rL356292 reduces the size of scalar_to_vector if we know the upper bits are undef - which means that shuffles may find they are suddenly referencing scalar_to_vector elements other than zero - so make sure we handle this as undef.
llvm-svn: 356327
Summary:
In the new wasm EH proposal, `rethrow` takes an `except_ref` argument.
This change was missing in r352598.
This patch adds `llvm.wasm.rethrow.in.catch` intrinsic. This is an
intrinsic that's gonna eventually be lowered to wasm `rethrow`
instruction, but this intrinsic can appear only within a catchpad or a
cleanuppad scope. Also this intrinsic needs to be invokable - otherwise
EH pad successor for it will not be correctly generated in clang.
This also adds lowering logic for this intrinsic in
`SelectionDAGBuilder::visitInvoke`. This routine is basically a
specialized and simplified version of
`SelectionDAGBuilder::visitTargetIntrinsic`, but we can't use it
because if is only for `CallInst`s.
This deletes the previous `llvm.wasm.rethrow` intrinsic and related
tests, which was meant to be used within a `__cxa_rethrow` library
function. Turned out this needs some more logic, so the intrinsic for
this purpose will be added later.
LateEHPrepare takes a result value of `catch` and inserts it into
matching `rethrow` as an argument.
`RETHROW_IN_CATCH` is a pseudo instruction that serves as a link between
`llvm.wasm.rethrow.in.catch` and the real wasm `rethrow` instruction. To
generate a `rethrow` instruction, we need an `except_ref` argument,
which is generated from `catch` instruction. But `catch` instrutions are
added in LateEHPrepare pass, so we use `RETHROW_IN_CATCH`, which takes
no argument, until we are able to correctly lower it to `rethrow` in
LateEHPrepare.
Reviewers: dschuff
Subscribers: sbc100, jgravelle-google, sunfish, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D59352
llvm-svn: 356316
Summary:
A number of optimizations are inhibited by single-use TokenFactors not
being merged into the TokenFactor using it. This makes we consider if
we can do the merge immediately.
Most tests changes here are due to the change in visitation causing
minor reorderings and associated reassociation of paired memory
operations.
CodeGen tests with non-reordering changes:
X86/aligned-variadic.ll -- memory-based add folded into stored leaq
value.
X86/constant-combiners.ll -- Optimizes out overlap between stores.
X86/pr40631_deadstore_elision -- folds constant byte store into
preceding quad word constant store.
Reviewers: RKSimon, craig.topper, spatel, efriedma, courbet
Reviewed By: courbet
Subscribers: dylanmckay, sdardis, nemanjai, jvesely, nhaehnle, javed.absar, eraman, hiraditya, kbarton, jrtc27, atanasyan, jsji, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D59260
llvm-svn: 356068
First step towards PR40800 - I intend to move the float case in a separate future patch.
I had to tweak the (overly reduced) thumb2 test and the x86 widening test change is annoying (no longer rematerializable) but we should address this separately.
Differential Revision: https://reviews.llvm.org/D59244
llvm-svn: 356040
The existing statepoint lowering code does something odd; it adds machine memory operands post instruction selection. This was copied from the stackmap/patchpoint implementation, but appears to be non-idiomatic.
This change is largely NFC. It moves the MMO creation logic into SelectionDAG building. It ends up not quite being NFC because the size of the stack slot is reflected in the MMO. The old code blindly used pointer size for the MMO size, which appears to have always been incorrect for larger values. It just happened nothing actually relied on the MMOs, so it worked out okay.
For context, I'm planning on removing the MOVolatile flag from these in a future commit, and then removing the MOStore flag from deopt spill slots in a separate one. Doing so is motivated by a small test case where we should be able to better schedule spill slots, but don't do so due to a memory use/def implied by the statepoint.
Differential Revision: https://reviews.llvm.org/D59106
llvm-svn: 355953
Expand MULO with constant power of two operand into a shift. The
overflow is checked with (x << shift) >> shift == x, where the right
shift will be logical for umulo and arithmetic for smulo (with
exception for multiplications by signed_min).
Differential Revision: https://reviews.llvm.org/D59041
llvm-svn: 355937
Fixes https://bugs.llvm.org/show_bug.cgi?id=36796.
Implement basic legalizations (PromoteIntRes, PromoteIntOp,
ExpandIntRes, ScalarizeVecOp, WidenVecOp) for VECREDUCE opcodes.
There are more legalizations missing (esp float legalizations),
but there's no way to test them right now, so I'm not adding them.
This also includes a few more changes to make this work somewhat
reasonably:
* Add support for expanding VECREDUCE in SDAG. Usually
experimental.vector.reduce is expanded prior to codegen, but if the
target does have native vector reduce, it may of course still be
necessary to expand due to legalization issues. This uses a shuffle
reduction if possible, followed by a naive scalar reduction.
* Allow the result type of integer VECREDUCE to be larger than the
vector element type. For example we need to be able to reduce a v8i8
into an (nominally) i32 result type on AArch64.
* Use the vector operand type rather than the scalar result type to
determine the action, so we can control exactly which vector types are
supported. Also change the legalize vector op code to handle
operations that only have vector operands, but no vector results, as
is the case for VECREDUCE.
* Default VECREDUCE to Expand. On AArch64 (only target using VECREDUCE),
explicitly specify for which vector types the reductions are supported.
This does not handle anything related to VECREDUCE_STRICT_*.
Differential Revision: https://reviews.llvm.org/D58015
llvm-svn: 355860
Includes a fix to emit a CheckOpcode for build_vector when immAllZerosV/immAllOnesV is used as a pattern root. This means it can't be used to look through bitcasts when used as a root, but that's probably ok. This extra CheckOpcode will ensure that the first match in the isel table will be a SwitchOpcode which is needed by the caching optimization in the ISel Matcher.
Original commit message:
Previously we had build_vector PatFrags that called ISD::isBuildVectorAllZeros/Ones. Internally the ISD::isBuildVectorAllZeros/Ones look through bitcasts, but we aren't able to take advantage of that in isel. Instead of we have to canonicalize the types of the all zeros/ones build_vectors and insert bitcasts. Then we have to pattern match those exact bitcasts.
By emitting specific matchers for these 2 nodes, we can make isel look through any bitcasts without needing to explicitly match them. We should also be able to remove the canonicalization to vXi32 from lowering, but I've left that for a follow up.
This removes something like 40,000 bytes from the X86 isel table.
Differential Revision: https://reviews.llvm.org/D58595
llvm-svn: 355784
This avoids breaking possible value dependencies when sorting loads by
offset.
AMDGPU has some load instructions that write into the high or low bits
of the destination register, and have a tied input for the other input
bits. These can easily have the same base pointer, but be a swizzle so
the high address load needs to come first. This was inserting glue
forcing the opposite ordering, producing a cycle the InstrEmitter
would assert on. It may be potentially expensive to look for the
dependency between the other loads, so just skip any where this could
happen.
Fixes bug 40936 by reverting r351379, which added a hacky attempt to
fix this by adding chains in this case, which I think was just working
around broken glue before the InstrEmitter. The core of the patch is
re-implementing the fix for that problem.
llvm-svn: 355728
Move the x86 combine from D58974 into the DAGCombine VSELECT code and update the SELECT version to use the isBooleanFlip helper as well.
Requested by @spatel on D59006
llvm-svn: 355533
During the lowering of a switch that would result in the generation of a
jump table, a range check is performed before indexing into the jump
table, for the switch value being outside the jump table range and a
conditional branch is inserted to jump to the default block. In case the
default block is unreachable, this conditional jump can be omitted. This
patch implements omitting this conditional branch for unreachable
defaults.
Differential Revision: https://reviews.llvm.org/D52002
Reviewers: Hans Wennborg, Eli Freidman, Roman Lebedev
llvm-svn: 355490
During the lowering of a switch that would result in the generation of a
jump table, a range check is performed before indexing into the jump
table, for the switch value being outside the jump table range and a
conditional branch is inserted to jump to the default block. In case the
default block is unreachable, this conditional jump can be omitted. This
patch implements omitting this conditional branch for unreachable
defaults.
Differential Revision: https://reviews.llvm.org/D52002
Reviewers: Hans Wennborg, Eli Freidman, Roman Lebedev
llvm-svn: 355483
This caused the first matcher in the isel table for many targets to Opc_Scope instead of Opc_SwitchOpcode. This leads to a significant increase in isel match failures.
llvm-svn: 355433
This patch enables combining integer bitcasts of integer build vectors when the new scalar type is legal. I've avoided floating point because the implementation bitcasts float to int along the way and we would need to check the intermediate types for legality
Differential Revision: https://reviews.llvm.org/D58884
llvm-svn: 355324
Summary:
Before when we implemented the first EH proposal, 'catch <tag>'
instruction may not catch an exception so there were multiple EH pads an
exception can unwind to. That means a BB could have multiple EH pad
successors.
Now after we switched to the new proposal, every 'catch' instruction
catches an exception, and there is only one catchpad per catchswitch, so
we at most have one EH pad successor, making `ThrowUnwindDest` map in
`WasmEHInfo` unnecessary.
Keeping `ThrowUnwindDest` map in `WasmEHInfo` has its own problems,
because other optimization passes can split a BB that contains possibly
throwing calls (previously invokes), and we have to update the map every
time that happens, which is not easy for common CodeGen passes.
This also correctly updates successor info in LateEHPrepare when we add
a rethrow instruction.
Reviewers: dschuff
Subscribers: sbc100, jgravelle-google, sunfish, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D58486
llvm-svn: 355296
Previously we had build_vector PatFrags that called ISD::isBuildVectorAllZeros/Ones. Internally the ISD::isBuildVectorAllZeros/Ones look through bitcasts, but we aren't able to take advantage of that in isel. Instead of we have to canonicalize the types of the all zeros/ones build_vectors and insert bitcasts. Then we have to pattern match those exact bitcasts.
By emitting specific matchers for these 2 nodes, we can make isel look through any bitcasts without needing to explicitly match them. We should also be able to remove the canonicalization to vXi32 from lowering, but I've left that for a follow up.
This removes something like 40,000 bytes from the X86 isel table.
Differential Revision: https://reviews.llvm.org/D58595
llvm-svn: 355224
Summary:
The description of KnownBits::zext() and
KnownBits::zextOrTrunc() has confusingly been telling
that the operation is equivalent to zero extending the
value we're tracking. That has not been true, instead
the user has been forced to explicitly set the extended
bits as known zero afterwards.
This patch adds a second argument to KnownBits::zext()
and KnownBits::zextOrTrunc() to control if the extended
bits should be considered as known zero or as unknown.
Reviewers: craig.topper, RKSimon
Reviewed By: RKSimon
Subscribers: javed.absar, hiraditya, jdoerfert, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D58650
llvm-svn: 355099
At the moment, we mark every atomic memory access as being also volatile. This is unnecessarily conservative and prohibits many legal transforms (DCE, folding, etc..).
This patch removes MOVolatile from the MachineMemOperands of atomic, but not volatile, instructions. This should be strictly NFC after a series of previous patches which have gone in to ensure backend code is conservative about handling of isAtomic MMOs. Once it's in and baked for a bit, we'll start working through removing unnecessary bailouts one by one. We applied this same strategy to the middle end a few years ago, with good success.
To make sure this patch itself is NFC, it is build on top of a series of other patches which adjust code to (for the moment) be as conservative for an atomic access as for a volatile access and build up a test corpus (mostly in test/CodeGen/X86/atomics-unordered.ll)..
Previously landed
D57593 Fix a bug in the definition of isUnordered on MachineMemOperand
D57596 [CodeGen] Be conservative about atomic accesses as for volatile
D57802 Be conservative about unordered accesses for the moment
rL353959: [Tests] First batch of cornercase tests for unordered atomics.
rL353966: [Tests] RMW folding tests w/unordered atomic operations.
rL353972: [Tests] More unordered atomic lowering tests.
rL353989: [SelectionDAG] Inline a single use helper function, and remove last non-MMO interface
rL354740: [Hexagon, SystemZ] Be super conservative about atomics
rL354800: [Lanai] Be super conservative about atomics
rL354845: [ARM] Be super conservative about atomics
Attention Out of Tree Backend Owners: This patch may break you. If it does, you can use the TLI getMMOFlags hook to restore the MOVolatile to any instruction you need to. (See llvm-dev thread titled "PSA: Changes to how atomics are handled in backends" started Feb 27, 2019.)
Differential Revision: https://reviews.llvm.org/D57601
llvm-svn: 355025
If SADDSAT/SSUBSAT are legal, then we can expand SADDO/SSUBO by performing a ADD/SUB and a SADDO/SSUBO and then compare the results.
I looked at doing this for UADDO/USUBO as well but as we don't have to do as many range comparisons I didn't see any/much benefit.
Differential Revision: https://reviews.llvm.org/D58637
llvm-svn: 354866
These helpers extend the existing isConstOrConstSplat helper checks to support DemandedElts masks as well.
We already had a local version of this in SelectionDAG that computeKnownBits/ComputeNumSignBits made use of, but this adds the functionality directly to the BuildVectorSDNode node and extends isConstOrConstSplat etc. to use that.
This will allow us to reuse the functionality in SimplifyDemandedVectorElts/SimplifyDemandedBits.
Differential Revision: https://reviews.llvm.org/D58503
llvm-svn: 354797
Support undef shuffle mask indices in the shuffle(concat_vectors, concat_vectors) -> concat_vectors fold
Differential Revision: https://reviews.llvm.org/D58585
llvm-svn: 354793
OPC_CheckCondCode is always used as operand 2 of a setcc. And its always surrounded by a MoveChild2 and a MoveParent. By having a dedicated opcode for this case we can reduce the number of bytes needed for this pattern from 4 bytes to 2.
This saves ~3000 bytes in the X86 table.
llvm-svn: 354763
Summary:
When promoting the over flow vector for these ops we should use the target's desired setcc result type. This way a v8i32 result type will use a v8i32 overflow vector instead of a v8i16 overflow vector. A v8i16 overflow vector will cause LegalizeDAG/LegalizeVectorOps to have to use v8i32 and truncate to v8i16 in its expansion. By doing this in type legalization instead, we get the truncate into the DAG earlier and give DAG combine more of a chance to optimize it.
We also have to fix unrolling to use the scalar setcc result type for the scalarized operation, and convert it to the required vector element type after the scalar operation. We have to observe the vector boolean contents when doing this conversion. The previous code was just taking the scalar result and putting it in the vector. But for X86 and AArch64 that would have only put a the boolean value in bit 0 of the element and left all other bits in the element 0. We need to ensure all bits in the element are the same. I'm using a select with constants here because that's what setcc unrolling in LegalizeVectorOps used.
Reviewers: spatel, RKSimon, nikic
Reviewed By: nikic
Subscribers: javed.absar, kristof.beyls, dmgreen, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D58567
llvm-svn: 354753
r354648 was a follow up to fix a regression "[X86] Add a DAG combine for (aext_vector_inreg (aext_vector_inreg X)) -> (aext_vector_inreg X) to fix a regression from my previous commit."
These were reverted in r354713 as their context depended on other patches that were reverted for a bug.
llvm-svn: 354734
r354363 caused https://crbug.com/934963#c1, which has a plain C reduced
test case.
I also had to revert some dependent changes:
- r354648
- r354647
- r354640
- r354511
llvm-svn: 354713
When we need to merge two adjacent loads the AND mask for the low piece was still sized for the full src element size. But we didn't have that many bits. The upper bits are already zero due to the SRL. So we can skip the AND if we're going to combine with the high bits.
We do need an AND to clear out any bits from the high part. We were anding the high part before combining with the low part, but it looks like ANDing after the OR gets better results.
So we can just emit the final AND after the optional concatentation is done. That will handling skipping before the OR and get rid of extra high bits after the OR.
llvm-svn: 354655
Otherwise we end up creating extract_vector_elts that then each need to have their input promoted. This can lead to truncates needing to be emitted for each of those.
But we already emitted any_extends when we legalized the extract_subvector. So now we have pairs of any_extend+trunc that partially cancel. But depending on how DAGCombiner visits them we can get weird results.
By promoting the input at the same time we can create only a single any_extend or truncate.
There's one regression in the vector-narrow-binop.ll case, but that looks easy to fix with a follow up patch.
llvm-svn: 354647
This fold can occur during legalization, so it can fight with promotion
to the larger type. It apparently takes a special sequence and subtarget
to avoid more basic simplifications that would hide the problem.
But there's a bigger question raised here: why does distributeTruncateThroughAnd()
even exist? It duplicates functionality from a more minimal pattern that we
already have. But getting rid of this function requires some preliminary steps.
https://bugs.llvm.org/show_bug.cgi?id=40793
llvm-svn: 354594
If the LHS has known zeros, then the RHS immediate mask might have been simplified to remove those bits.
This patch adds a call to computeKnownBits to get the known zeroes to handle that possibility. I left an early out to skip the call if all of the demanded bits are set in the mask.
Differential Revision: https://reviews.llvm.org/D58464
llvm-svn: 354514
Second part of https://bugs.llvm.org/show_bug.cgi?id=40442.
This adds an extra UnrollVectorOverflowOp() method to SDAG, because
the general UnrollOverflowOp() method can't deal with multiple results.
Additionally we need to expand UMULO/SMULO during vector op
legalization, as it may result in unrolling, which may need additional
type legalization.
Differential Revision: https://reviews.llvm.org/D57997
llvm-svn: 354513
If the bit position has known zeros in it, then the AND immediate will likely be optimized to remove bits.
This can prevent GetDemandedBits from recognizing that the AND is unnecessary.
llvm-svn: 354498
Directly use the correct shift amount type if it is possible, and
future-proof the code against vectors. The added test makes sure that
bitwidths that do not fit into the shift amount type do not assert.
Split out from D57997.
llvm-svn: 354359
Summary:
A store to an object whose lifetime is about to end can be removed.
See PR40550 for motivation.
Reviewers: niravd
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D57541
llvm-svn: 354244
In preparation for supporting vector expansion.
Add an isPostTypeLegalization flag to makeLibCall(), because this
expansion relies on the legalized form using MERGE_VALUES. Drop
the corresponding variant of ExpandLibCall, which is no longer used.
Differential Revision: https://reviews.llvm.org/D58006
llvm-svn: 354226
While rebasing a refactor in r353950 I accidentally swapped two function
arguments; one is SelectionDAGBuilders "current" DebugLoc, the other is the one
from the "current" debug intrinsic. They're probably always identical, but I
haven't proved that yet.
llvm-svn: 354019
For D57601, we need to know whether the instruction is volatile. We'd either have to pass yet another parameter, or just standardize on the MMO interface. I chose the second.
llvm-svn: 353989
The helper function was used by only two callers, and largely ended up providing distinct functionality based on optional arguments and opcode. Inline and simply to make the functionality much more clear.
llvm-svn: 353977
In this patch SelectionDAG tries to salvage any dbg.values that are going to be
dropped, in case they can be recovered from Values in the current BB. It also
strengthens SelectionDAGs handling of dangling debug data, so that dbg.values
are *always* emitted (as Undef or otherwise) instead of dangling forever.
The motivation behind this patch exists in the new test case: a memory address
(here a bitcast and GEP) exist in one basic block, and a dbg.value referring to
the address is left in the 'next' block. The base pointer is live across all
basic blocks. In current llvm trunk the dbg.value cannot be encoded, and it
isn't even emitted as an Undef DBG_VALUE.
The change is simply: if we're definitely going to drop a dbg.value, repeatedly
apply salvageDebugInfo to its operand until either we find something that can
be encoded, or we can't salvage any further in which case we produce an Undef
DBG_VALUE. To know when we're "definitely going to drop a dbg.value",
SelectionDAG signals SelectionDAGBuilder when all IR instructions have been
encoded to force salvaging. This ensures that any dbg.value that's dangling
after DAG creation will have a corresponding DBG_VALUE encoded.
Differential Revision: https://reviews.llvm.org/D57694
llvm-svn: 353954
This is a pure copy-and-paste job, moving the logic for lowering dbg.value
intrinsics to SDDbgValues into its own function. This is ahead of adding some
more users of this logic.
Differential Revision: https://reviews.llvm.org/D57697
llvm-svn: 353950
SelectionDAGBuilder has special handling for dbg.value intrinsics that are
understood to define the location of function parameters on entry to the
function. To enable this, we avoid recording a dbg.value as a virtual register
reference if it might be such a parameter, so that it later hits
EmitFuncArgumentDbgValue.
This patch reduces the set of circumstances where we avoid recording a
dbg.value as a virtual register reference, to allow more "normal" variables
to be recorded that way. We now only bypass for potential parameters if:
* The dbg.value operand is an Argument,
* The Variable is a parameter, and
* The Variable is not inlined.
meaning it's very likely that the dbg.value is a function-entry parameter
location.
Differential Revision: https://reviews.llvm.org/D57584
llvm-svn: 353948
If we're comparing some value for equality against 2 constants
and those constants have an absolute difference of just 1 bit,
then we can offset and mask off that 1 bit and reduce to a single
compare against zero:
and/or (setcc X, C0, ne), (setcc X, C1, ne/eq) -->
setcc ((add X, -C1), ~(C0 - C1)), 0, ne/eq
https://rise4fun.com/Alive/XslKj
This transform is disabled by default using a TLI hook
("convertSetCCLogicToBitwiseLogic()").
That should be overridden for AArch64, MIPS, Sparc and possibly
others based on the asm shown in:
https://bugs.llvm.org/show_bug.cgi?id=40611
llvm-svn: 353859
Summary:
The SMULO/UMULO DAG nodes, when not directly supported by the target,
expand to a multiplication twice as wide. In case that the resulting
type is not legal, the legalizer cannot directly call the intrinsic
with the wide arguments; instead, it "pre-lowers" them by splitting
them in halves.
rL283203 made sure that on big endian targets, the legalizer passes
the argument halves in the correct order. It did not do the same
for the return value halves because the existing code used a hack;
it put an illegal type into DAG and hoped that nothing would break
and it would be correctly lowered elsewhere.
rL307207 fixed this, handling return value halves similar to how
argument handles are handled, but did not take big-endian targets
into account.
This commit fixes the expansion on big-endian targets, such as
the out-of-tree OR1K target.
Reviewers: eli.friedman, vadimcn
Subscribers: george-hopkins, efriedma, llvm-commits
Differential Revision: https://reviews.llvm.org/D45355
llvm-svn: 353854
Summary:
This patch fixes PR40587.
When a dbg.value instrinsic is emitted to the DAG
by using EmitFuncArgumentDbgValue the resulting
DBG_VALUE is hoisted to the beginning of the entry
block. I think the idea is to be able to locate
a formal argument already from the start of the
function.
However, EmitFuncArgumentDbgValue only checked that
the value that was used to describe a variable was
originating from a function parameter, not that the
variable itself actually was an argument to the
function. So when for example assigning a local
variable "local" the value from an argument "a",
the assocated DBG_VALUE instruction would be hoisted
to the beginning of the function, even if the scope
for "local" started somewhere else (or if "local"
was mapped to other values earlier in the function).
This patch adds some logic to EmitFuncArgumentDbgValue
to check that the variable being described actually
is an argument to the function. And that the dbg.value
being lowered already is in the entry block. Otherwise
we bail out, and the dbg.value will be handled as an
ordinary dbg.value (not as a "FuncArgumentDbgValue").
A tricky situation is when both the variable and
the value is related to function arguments, but not
neccessarily the same argument. We make sure that we
do not describe the same argument more than once as
a "FuncArgumentDbgValue". This solution works as long
as opt has injected a "first" dbg.value that corresponds
to the formal argument at the function entry.
Reviewers: jmorse, aprantl
Subscribers: jyknight, hiraditya, fedor.sergeev, dstenb, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D57702
llvm-svn: 353735
`CallBase` class rather than `CallSite` wrappers.
I pushed this change down through most of the statepoint infrastructure,
completely removing the use of CallSite where I could reasonably do so.
I ended up making a couple of cut-points: generic call handling
(instcombine, TLI, SDAG). As soon as it hit truly generic handling with
users outside the immediate code, I simply transitioned into or out of
a `CallSite` to make this a reasonable sized chunk.
Differential Revision: https://reviews.llvm.org/D56122
llvm-svn: 353660
Now that we have vector support for [US](ADD|SUB)O we no longer
need to scalarize when expanding [US](ADD|SUB)SAT.
This matches what the cost model already does.
Differential Revision: https://reviews.llvm.org/D57348
llvm-svn: 353651
Now that we have SimplifyDemandedBits support for funnel shifts (rL353539), we need to simplify funnel shifts back to bitshifts in cases where either argument has been folded to undef/zero.
Differential Revision: https://reviews.llvm.org/D58009
llvm-svn: 353645
SimplifySetCC still has much room for improvement, but this should
fix the remaining problem examples from:
https://bugs.llvm.org/show_bug.cgi?id=40657
The initial fix for this problem was rL353615.
llvm-svn: 353639
There's effectively no difference for the cases with variables.
We just trade a sub for an add on those. But the case with a
subtract from constant would require an extra move instruction
on x86, so this looks like a reasonable generic combine.
llvm-svn: 353619
In preparation for supporting vector expansion.
Also drop a variant of ExpandLibCall, of which the MULO expansions
were the only user.
llvm-svn: 353611
This patch accompanies the RFC posted here:
http://lists.llvm.org/pipermail/llvm-dev/2018-October/127239.html
This patch adds a new CallBr IR instruction to support asm-goto
inline assembly like gcc as used by the linux kernel. This
instruction is both a call instruction and a terminator
instruction with multiple successors. Only inline assembly
usage is supported today.
This also adds a new INLINEASM_BR opcode to SelectionDAG and
MachineIR to represent an INLINEASM block that is also
considered a terminator instruction.
There will likely be more bug fixes and optimizations to follow
this, but we felt it had reached a point where we would like to
switch to an incremental development model.
Patch by Craig Topper, Alexander Ivchenko, Mikhail Dvoretckii
Differential Revision: https://reviews.llvm.org/D53765
llvm-svn: 353563
The sqrt case is faster and we already do this for the case where
the exponent is 0.25. This adds the 0.75 case which is also not
sensitive to signed zeros.
Patch by Whitney Tsang (Whitney)
Differential revision: https://reviews.llvm.org/D57434
llvm-svn: 353557
Replace OR(SHL,SRL) pattern with ISD::FSHR (legalization expands this later if necessary) - this helps with the scale == 0 'undefined' drop-through case that was discussed on D55720.
llvm-svn: 353546
This is part of https://bugs.llvm.org/show_bug.cgi?id=40442.
Vector legalization is implemented for the add/sub overflow opcodes.
UMULO/SMULO are also handled as far as legalization is concerned, but
they don't support vector expansion yet (so no tests for them).
The vector result widening implementation is suboptimal, because it
could result in a legalization loop.
Differential Revision: https://reviews.llvm.org/D57639
llvm-svn: 353464
Move the (add (umax X, C), -C) --> (usubsat X, C) X86 combine into generic DAGCombiner
First of a number of saturated arithmetic folds that can be moved out of X86-specific code for PR40111.
Differential Revision: https://reviews.llvm.org/D57754
llvm-svn: 353457
I noticed that we are missing this canonicalization in IR:
rL352515
...and then realized that we don't get this right in SDAG either,
so this has to be fixed first regardless of what we choose to do in IR.
The existing fold was limited to scalars and using the wrong predicate
to guard the transform. We have a boolean contents TLI query that can
be used to decide which direction to fold.
This may eventually lead back to the problems/question in:
https://bugs.llvm.org/show_bug.cgi?id=40486
...but it makes no difference to that yet.
Differential Revision: https://reviews.llvm.org/D57401
llvm-svn: 353433
Summary:
If the index isn't constant, this transform inserts a multiply and an add on the index to calculating the base pointer for a scalar load. But we still create a memory operand with an offset of 0 and the size of the scalar access. But the access is really to an unknown offset within the original access size.
This can cause the machine scheduler to incorrectly calculate dependencies between this load and other accesses. In the case we saw, there was a 32 byte vector store that was split into two 16 byte stores, one with offset 0 and one with offset 16. The size of the memory operand for both was 16. The scheduler correctly detected the alias with the offset 0 store, but not the offset 16 store.
This patch discards the pointer info so we don't incorrectly detect aliasing. I wasn't sure if we could keep using the original offset and size without risking some other transform on the load changing the size.
I tried to reduce a test case, but there's still a lot of memory operations needed to get the scheduler to do the bad reordering. So it looked pretty fragile to maintain.
Reviewers: efriedma
Reviewed By: efriedma
Subscribers: arphaman, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D57616
llvm-svn: 353124
Add an intrinsic that takes 2 unsigned integers with the scale of them
provided as the third argument and performs fixed point multiplication on
them.
This is a part of implementing fixed point arithmetic in clang where some of
the more complex operations will be implemented as intrinsics.
Differential Revision: https://reviews.llvm.org/D55625
llvm-svn: 353059
Noticed while investigating PR40483, and fixes the basic test case from the bug - but not a more general case.
We're pretty weak at dealing with ADD/SUB combines compared to the SimplifyAssociativeOrCommutative/SimplifyUsingDistributiveLaws abilities that InstCombine can manage.
llvm-svn: 353044
We already have the getConstantOperandVal helper which returns a uint64_t, but along comes the fuzzer and inserts a i128 -1 constant or something and the whole thing asserts.......
I've updated a few obvious cases, and tried to make use of the const reference where possible, but there's more to do. A number of existing oss-fuzz tickets should be fixed if we start using APInt and perform value clamping where necessary.
llvm-svn: 352961
Summary: This fixes using the correct stack registers for SEH when stack realignment is needed or when variable size objects are present.
Reviewers: rnk, efriedma, ssijaric, TomTan
Reviewed By: rnk, efriedma
Subscribers: javed.absar, kristof.beyls, llvm-commits
Differential Revision: https://reviews.llvm.org/D57183
llvm-svn: 352923
This cleans up all CallInst creation in LLVM to explicitly pass a
function type rather than deriving it from the pointer's element-type.
Differential Revision: https://reviews.llvm.org/D57170
llvm-svn: 352909
The version of FoldConstantArithmetic() that takes arbitrary nodes
was confusingly naming those nodes as constants when they might
not be; also "Cst" reads like "Cast".
llvm-svn: 352884
This might be the start of tracking all vector element constants generally if we take it to its
logical conclusion, but let's stop here and make sure this is correct/beneficial so far.
The affected tests require a convoluted path before they get simplified currently because we
don't call SimplifyDemandedVectorElts() from binops directly and don't modify the binop operands
directly in SimplifyDemandedVectorElts().
That's why the tests all have a trailing shuffle to induce a chain reaction of transforms. So
something like this is happening:
1. Improve the knowledge of undefs in the binop via a SimplifyDemandedVectorElts() call that
originates from a shuffle.
2. Transfer that undef knowledge back to the shuffle mask user as more undef lanes.
3. Combine the modified shuffle by calling SimplifyDemandedVectorElts() again.
4. Translate the improved shuffle mask as undemanded lanes of build vector constants causing
those to become full undef constants.
5. Simplify the binop now that it has a full undef operand.
As we can see from the unchanged 'and' and 'or' tests, tracking undefs alone isn't a full solution.
We would need to track zero and all-ones constants to improve those opcodes. We'd probably need to
track NaN for FP ops too (assuming we don't have fast-math-flags set).
Differential Revision: https://reviews.llvm.org/D57066
llvm-svn: 352880
For targets where i32 is not a legal type (e.g. 64-bit RISC-V),
LegalizeIntegerTypes must promote the integer operand of ISD::FPOWI. As this
is a signed value, this should be sign-extended.
This patch enables all tests in test/CodeGen/RISCVfloat-intrinsics.ll for
RV64, as prior to this patch that file couldn't be compiled for RV64 due to an
assertion when performing codegen for fpowi.
Differential Revision: https://reviews.llvm.org/D54574
llvm-svn: 352832
This patch fixes pr39098.
For the attached test case, CombineZExtLogicopShiftLoad can optimize it to
t25: i64 = Constant<1099511627775>
t35: i64 = Constant<0>
t0: ch = EntryToken
t57: i64,ch = load<(load 4 from `i40* undef`, align 8), zext from i32> t0, undef:i64, undef:i64
t58: i64 = srl t57, Constant:i8<1>
t60: i64 = and t58, Constant:i64<524287>
t29: ch = store<(store 5 into `i40* undef`, align 8), trunc to i40> t57:1, t60, undef:i64, undef:i64
But later visitANDLike transforms it to
t25: i64 = Constant<1099511627775>
t35: i64 = Constant<0>
t0: ch = EntryToken
t57: i64,ch = load<(load 4 from `i40* undef`, align 8), zext from i32> t0, undef:i64, undef:i64
t61: i32 = truncate t57
t63: i32 = srl t61, Constant:i8<1>
t64: i32 = and t63, Constant:i32<524287>
t65: i64 = zero_extend t64
t58: i64 = srl t57, Constant:i8<1>
t60: i64 = and t58, Constant:i64<524287>
t29: ch = store<(store 5 into `i40* undef`, align 8), trunc to i40> t57:1, t60, undef:i64, undef:i64
And it triggers CombineZExtLogicopShiftLoad again, causes a dead loop.
Both forms should generate same instructions, CombineZExtLogicopShiftLoad generated IR looks cleaner. But it looks more difficult to prevent visitANDLike to do the transform, so I prevent CombineZExtLogicopShiftLoad to do the transform if the ZExt is free.
Differential Revision: https://reviews.llvm.org/D57491
llvm-svn: 352792
While dangling nodes will eventually be pruned when they are
considered, leaving them disables combines requiring single-use.
Reviewers: Carrot, spatel, craig.topper, RKSimon, efriedma
Subscribers: hiraditya, llvm-commits
Differential Revision: https://reviews.llvm.org/D57520
llvm-svn: 352784
r zero scale SMULFIX, expand into MUL which produces better code for X86.
For vector arguments, expand into MUL if SMULFIX is provided with a zero scale.
Otherwise, expand into MULH[US] or [US]MUL_LOHI.
Differential Revision: https://reviews.llvm.org/D56987
llvm-svn: 352783
And instead just generate a libcall. My motivating example on ARM was a simple:
shl i64 %A, %B
for which the code bloat is quite significant. For other targets that also
accept __int128/i128 such as AArch64 and X86, it is also beneficial for these
cases to generate a libcall when optimising for minsize. On these 64-bit targets,
the 64-bits shifts are of course unaffected because the SHIFT/SHIFT_PARTS
lowering operation action is not set to custom/expand.
Differential Revision: https://reviews.llvm.org/D57386
llvm-svn: 352736
Summary:
Fixes PR40267, in which the removed assertion was triggering on
perfectly valid IR. As far as I can tell, constant out of bounds
indices should be allowed when splitting extract_vector_elt, since
they will simply be propagated as out of bounds indices in the
resulting split vector and handled appropriately elsewhere.
Reviewers: aheejin
Subscribers: dschuff, sbc100, jgravelle-google, hiraditya
Differential Revision: https://reviews.llvm.org/D57471
llvm-svn: 352702
These can be triggered by mistakenly using a 64-bit mode only intrinsics with a -mtriple=i686. Using report_fatal_error gives a better experience for this mistake in release builds instead of probably crashing.
We already do this for some of the vector type legalization handles.
llvm-svn: 352699
This extends the existing transform for:
add X, 0/1 --> sub X, 0/-1
...to allow the sibling subtraction fold.
This pattern could regress with the proposed change in D57401.
llvm-svn: 352680
Summary:
This switches the EH implementation to the new proposal:
https://github.com/WebAssembly/exception-handling/blob/master/proposals/Exceptions.md
(The previous proposal was
https://github.com/WebAssembly/exception-handling/blob/master/proposals/old/Exceptions.md)
- Instruction changes
- Now we have one single `catch` instruction that returns a except_ref
value
- `throw` now can take variable number of operations
- `rethrow` does not have 'depth' argument anymore
- `br_on_exn` queries an except_ref to see if it matches the tag and
branches to the given label if true.
- `extract_exception` is a pseudo instruction that simulates popping
values from wasm stack. This is to make `br_on_exn`, a very special
instruction, work: `br_on_exn` puts values onto the stack only if it
is taken, and the # of values can vay depending on the tag.
- Now there's only one `catch` per `try`, this patch removes all special
handling for terminate pad with a call to `__clang_call_terminate`.
Before it was the only case there are two catch clauses (a normal
`catch` and `catch_all` per `try`).
- Make `rethrow` act as a terminator like `throw`. This splits BB after
`rethrow` in WasmEHPrepare, and deletes an unnecessary `unreachable`
after `rethrow` in LateEHPrepare.
- Now we stop at all catchpads (because we add wasm `catch` instruction
that catches all exceptions), this creates new
`findWasmUnwindDestinations` function in SelectionDAGBuilder.
- Now we use `br_on_exn` instrution to figure out if an except_ref
matches the current tag or not, LateEHPrepare generates this sequence
for catch pads:
```
catch
block i32
br_on_exn $__cpp_exception
end_block
extract_exception
```
- Branch analysis for `br_on_exn` in WebAssemblyInstrInfo
- Other various misc. changes to switch to the new proposal.
Reviewers: dschuff
Subscribers: sbc100, jgravelle-google, sunfish, llvm-commits
Differential Revision: https://reviews.llvm.org/D57134
llvm-svn: 352598
This is the sibling fold for insert-of-insert that was added with D56604.
Now that we have x86 shuffle narrowing (D57156), this change shows improvements for
lots of AVX512 reduction code (not sure that we would ever expect extract-of-extract otherwise).
There's a small regression in some of the partial-permute tests (extracting followed by splat).
That is tracked by PR40500:
https://bugs.llvm.org/show_bug.cgi?id=40500
Differential Revision: https://reviews.llvm.org/D57336
llvm-svn: 352528
This fixes most references to the paths:
llvm.org/svn/
llvm.org/git/
llvm.org/viewvc/
github.com/llvm-mirror/
github.com/llvm-project/
reviews.llvm.org/diffusion/
to instead point to https://github.com/llvm/llvm-project.
This is *not* a trivial substitution, because additionally, all the
checkout instructions had to be migrated to instruct users on how to
use the monorepo layout, setting LLVM_ENABLE_PROJECTS instead of
checking out various projects into various subdirectories.
I've attempted to not change any scripts here, only documentation. The
scripts will have to be addressed separately.
Additionally, I've deleted one document which appeared to be outdated
and unneeded:
lldb/docs/building-with-debug-llvm.txt
Differential Revision: https://reviews.llvm.org/D57330
llvm-svn: 352514
During the lowering of a switch that would result in the generation of a
jump table, a range check is performed before indexing into the jump
table, for the switch value being outside the jump table range and a
conditional branch is inserted to jump to the default block. In case the
default block is unreachable, this conditional jump can be omitted. This
patch implements omitting this conditional branch for unreachable
defaults.
Review ID: D52002
Reviewers: Hans Wennborg, Eli Freidman, Roman Lebedev
llvm-svn: 352484
A FrameIndex should be valid throughout a block regardless of what instructions
get selected in that block -- therefore we shouldn't harness dbg.values that
refer to FrameIndexes to an SDNode. There are numerous codegen reasons why
an SDNode never appears or doesn't become a location that a DBG_VALUE can
refer to. None of them actually affect the variable location.
Therefore, before any other tests to encode dbg_values in a SelectionDAG,
identify FrameIndex operands and encode them unattached to any SDNode.
Differential Revision: https://reviews.llvm.org/D57328
llvm-svn: 352467
This did not cause the buildbot failure it was previously reverted for.
Original commit message:
I'm not sure why we were using SEXTLOAD. EXTLOAD seems more appropriate since we don't care about the upper bits.
This patch changes this and then modifies the X86 post legalization combine to emit a extending shuffle instead of a sign_extend_vector_inreg. Could maybe use an any_extend_vector_inre
On AVX512 targets I think we might be able to use a masked vpmovzx and not have to expand this at all.
llvm-svn: 352433
Followup to D56636, this time handling the UADDSAT case by expanding
uadd.sat(a, b) to umin(a, ~b) + b.
Differential Revision: https://reviews.llvm.org/D56869
llvm-svn: 352409
This patch improves the placement of DBG_VALUEs when by SelectionDAG, which
as documented in PR40427 can go very wrong. At the core of this is
ProcessSourceNode, which assumes the last instruction in a BB is the start
of the last processed IR instruction, which isn't always true.
Instead, use a helper function to call InstrEmitter::EmitNode, that records
before-and-after iterators and determines the first of any new instruction
created during emission. This is passed to ProcessSourceNode, which can
then make more elightened decisions about ordering for DBG_VALUE placement.
Differential revision: https://reviews.llvm.org/D57163
llvm-svn: 352350
Summary:
I'm not sure why we were using SEXTLOAD. EXTLOAD seems more appropriate since we don't care about the upper bits.
This patch changes this and then modifies the X86 post legalization combine to emit a extending shuffle instead of a sign_extend_vector_inreg. Could maybe use an any_extend_vector_inreg, but I just did what we already do in LowerLoad. I think we can actually get rid of this code entirely if we switch to -x86-experimental-vector-widening-legalization.
On AVX512 targets I think we might be able to use a masked vpmovzx and not have to expand this at all.
Reviewers: RKSimon, spatel
Reviewed By: RKSimon
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D57186
llvm-svn: 352255
It should be emitted when any floating-point operations (including
calls) are present in the object, not just when calls to printf/scanf
with floating point args are made.
The difference caused by this is very subtle: in static (/MT) builds,
on x86-32, in a program that uses floating point but doesn't print it,
the default x87 rounding mode may not be set properly upon
initialization.
This commit also removes the walk of the types pointed to by pointer
arguments in calls. (To assist in opaque pointer types migration --
eventually the pointee type won't be available.)
That latter implies that it will no longer consider a call like
`scanf("%f", &floatvar)` as sufficient to emit _fltused on its
own. And without _fltused, `scanf("%f")` will abort with error R6002. This
new behavior is unlikely to bite anyone in practice (you'd have to
read a float, and do nothing with it!), and also, is consistent with
MSVC.
Differential Revision: https://reviews.llvm.org/D56548
llvm-svn: 352076
The current check in CombineToPreIndexedLoadStore is too
conversative, preventing a pre-indexed store when the base pointer
is a predecessor of the value being stored. Instead, we should check
the pointer operand of the store.
Differential Revision: https://reviews.llvm.org/D56719
llvm-svn: 351933
Also add debug prints in the default case of the switches in these routines.
Most if not all of the type legalization handlers already do this so this makes promoting floats consistent
llvm-svn: 351890
vecbo (insertsubv undef, X, Z), (insertsubv undef, Y, Z) --> insertsubv VecC, (vecbo X, Y), Z
This is another step in generic vector narrowing. It's also a step towards more horizontal op
formation specifically for x86 (although we still failed to match those in the affected tests).
The scalarization cases are also not optimal (we should be scalarizing those), but it's still
an improvement to use a narrower vector op when we know part of the result must be constant
because both inputs are undef in some vector lanes.
I think a similar match but checking for a constant operand might help some of the cases in
D51553.
Differential Revision: https://reviews.llvm.org/D56875
llvm-svn: 351825
The regression test is reduced from the example shown in D56281.
This does raise a question as noted in the test file: do we want
to handle this pattern? I don't have a motivating example for
that on x86 yet, but it seems like we could have that pattern
there too, so we could avoid the back-and-forth using a shuffle.
llvm-svn: 351753
to reflect the new license.
We understand that people may be surprised that we're moving the header
entirely to discuss the new license. We checked this carefully with the
Foundation's lawyer and we believe this is the correct approach.
Essentially, all code in the project is now made available by the LLVM
project under our new license, so you will see that the license headers
include that license only. Some of our contributors have contributed
code under our old license, and accordingly, we have retained a copy of
our old license notice in the top-level files in each project and
repository.
llvm-svn: 351636
Summary:
This patch makes some changes related to -dag-dump-verbose.
Main use case has been when debugging how SelectionDAG is
dealing with debug info (SDDbgValue nodes).
1) We now print the number of DbgValues that are mapped to each
SDNode.
2) Removed duplicated printing of DebugLoc (nowadays DebugLoc is
printed also when not using -dag-dump-verbose).
3) Renamed SDDbgValue::dump to SDDbgValue::print, and added a
new SDDbgValue::dump that will start a new line after calling
print.
4) SDDbgValue::print now prints "Order", and it also prints
some additional information when kind is CONST/FRAMEIX/VREG.
5) SelectionDAG::dump() now dumps all SDDbgValue nodes after
the list of SDNodes (both "regular" and "ByVal" SDDbgValue:s).
Invalidated nodes are not printed.
6) Prohibit inline printing of SDNode operands that has SDDbgValue
nodes associated to them.
Reviewers: jmorse, aprantl
Reviewed By: aprantl
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D56793
llvm-svn: 351581
Similar to D55073. Without this change, the DAG combiner crashes on code
with more than 64k of stores in a single basic block that form parallelizable
chains.
No test case, as it would be very IR file.
Reviewed By: RKSimon
Differential Revision: https://reviews.llvm.org/D56740
llvm-svn: 351571
Defer inline asm's output fixup work until after we've generated the
inline asm node itself. Remove StoresToEmit, IndirectStoresToEmit, and
RetValRegs in favor of using ConstraintOperands.
llvm-svn: 351558
This functionality is required at multiple places which potentially
create large operand lists, like SelectionDAGBuilder or DAGCombiner.
Differential Revision: https://reviews.llvm.org/D56739
llvm-svn: 351552
Summary:
Use this helper to make sure we use the same value at various places.
This will likely be needed at more places were we currently crash
because we use more operands than possible.
Also makes it easier to change in the future.
Reviewers: RKSimon, craig.topper, efriedma, aemerson
Reviewed By: RKSimon
Subscribers: hiraditya, arsenm, llvm-commits
Differential Revision: https://reviews.llvm.org/D56859
llvm-svn: 351537
We should not pre-scheduled the node has ADJCALLSTACKDOWN parent,
or else, when bottom-up scheduling, ADJCALLSTACKDOWN and
ADJCALLSTACKUP may hold CallResource too long and make other
calls can't be scheduled. If there's no other available node
to schedule, the scheduler will try to rename the register by
creating copy to avoid the conflict which will fail because
CallResource is not a real physical register.
llvm-svn: 351527
Summary:
This patch supports MS SEH extensions __try/__except/__finally. The intrinsics localescape and localrecover are responsible for communicating escaped static allocas from the try block to the handler.
We need to preserve frame pointers for SEH. So we create a new function/property HasLocalEscape.
Reviewers: rnk, compnerd, mstorsjo, TomTan, efriedma, ssijaric
Reviewed By: rnk, efriedma
Subscribers: smeenai, jrmuizel, alex, majnemer, ssijaric, ehsan, dmajor, kristina, javed.absar, kristof.beyls, chrib, llvm-commits
Differential Revision: https://reviews.llvm.org/D53540
llvm-svn: 351370
dbg.value intrinsics can appear in blocks where their operand is not used,
meaning the operand never receives an SDNode, and thus no DBG_VALUE will
be created. Get around this by looking to see whether the operand has already
been allocated a virtual register. This allows dbg.values of Phi node and
Values that are used across basic blocks to successfully be translated into
DBG_VALUEs.
Differential Revision: https://reviews.llvm.org/D56678
llvm-svn: 351358
The value returned by max() is the last valid value, adjust the
comparison accordingly.
The code added in D55073 creates TokenFactors with max() operands.
Reviewers: aemerson, efriedma, RKSimon, craig.topper
Reviewed By: aemerson
Differential Revision: https://reviews.llvm.org/D56738
llvm-svn: 351318
ReduceLoadWidth can trigger using a shifted mask is used and this
requires that the function return a shl node to correct for the
offset. However, the way that this was implemented meant that the
returned result could be an existing node, which would be incorrect.
This fixes the method of inserting the new node and replacing uses.
Differential Revision: https://reviews.llvm.org/D50432
llvm-svn: 351310
The motivating case for this is shown in the first regression test. We are
transferring to scalar and back rather than just zero-extending with 'vpmovzxdq'.
That's a special-case for a more general pattern as shown here. In all tests,
we're avoiding the vector-scalar-vector moves in favor of vector ops.
We aren't producing optimal shuffle code in some cases though, so the patch is
limited to reduce regressions.
Differential Revision: https://reviews.llvm.org/D56281
llvm-svn: 351198
I accidentally triggered this code while doing some experiments and it doesn't look lke it could possibly work.
It calls 'getNOT' on a node that should be a CondCode.
I think to do this right we would need to swap the branch target and the fallthrough target. But that's not easy to do. Or we could create an explicit SetCC and feed that into a new BR_CC?
llvm-svn: 351022
This pattern:
t33: v8i32 = insert_subvector undef:v8i32, t35, Constant:i64<0>
t21: v16i32 = insert_subvector undef:v16i32, t33, Constant:i64<0>
...shows up in PR33758:
https://bugs.llvm.org/show_bug.cgi?id=33758
...although this patch doesn't make any difference to the final result on that yet.
In the affected tests here, it looks like it just makes RA wiggle. But we might
as well squash this to prevent it interfering with other pattern-matching.
Differential Revision:
https://reviews.llvm.org/D56604
llvm-svn: 351008
This patch takes some of the code from D49837 to allow us to enable ISD::ABS support for all SSE vector types.
Differential Revision: https://reviews.llvm.org/D56544
llvm-svn: 350998
Summary:
When legalizing the result of a SELECT_CC node by promoting the
floating-point type, use the promoted-to type rather than the original
type.
Fix PR40273.
Reviewers: efriedma, majnemer
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D56566
llvm-svn: 350951
That is, remove many of the calls to Type::getNumContainedTypes(),
Type::subtypes(), and Type::getContainedType(N).
I'm not intending to remove these accessors -- they are
useful/necessary in some cases. However, removing the pointee type
from pointers would potentially break some uses, and reducing the
number of calls makes it easier to audit.
llvm-svn: 350835
This removes check for single use from general ShrinkDemandedConstant
to the BE because of the AArch64 regression after D56289/rL350475.
After several hours of experiments I did not come up with a testcase
failing on any other targets if check is not performed.
Moreover, direct call to ShrinkDemandedConstant is not really needed
and superceed by SimplifyDemandedBits.
Differential Revision: https://reviews.llvm.org/D56406
llvm-svn: 350684
As we saw in D56057 when we tried to use this function on X86, it's unsafe. It allows the operand node to have multiple users, but doesn't prevent recursing past the first node when it does have multiple users. This can cause other simplifications earlier in the graph without regard to what bits are needed by the other users of the first node. Ideally all we should do to the first node if it has multiple uses is bypass it when its not needed by the user we started from. Doing any other transformation that SimplifyDemandedBits can do like turning ZEXT/SEXT into AEXT would result in an increase in instructions.
Fortunately, we already have a function that can do just that, GetDemandedBits. It will only make transformations that involve bypassing a node.
This patch changes AMDGPU's simplifyI24, to use a combination of GetDemandedBits to handle the multiple use simplifications. And then uses the regular SimplifyDemandedBits on each operand to handle simplifications allowed when the operand only has a single use. Unfortunately, GetDemandedBits simplifies constants more aggressively than SimplifyDemandedBits. This caused the -7 constant in the changed test to be simplified to remove the upper bits. I had to modify computeKnownBits to account for this by ignoring the upper 8 bits of the input.
Differential Revision: https://reviews.llvm.org/D56087
llvm-svn: 350560
The FSHL/FSHR nodes are handled in the expand function, but they need to also be listed in the code that queries for the operation action too.
llvm-svn: 350490
Fixes cvt_f32_ubyte combine. performCvtF32UByteNCombine() could shrink
source node to demanded bits only even if there are other uses.
Differential Revision: https://reviews.llvm.org/D56289
llvm-svn: 350475
This adds support for calculating sign bits of insert_subvector. I based it on the computeKnownBits.
My motivating case is propagating sign bits information across basic blocks on AVX targets where concatenating using insert_subvector is common.
Differential Revision: https://reviews.llvm.org/D56283
llvm-svn: 350432
As noted in PR39973 and D55558:
https://bugs.llvm.org/show_bug.cgi?id=39973
...this is a partial implementation of a fold that we do as an IR canonicalization in instcombine:
// extelt (binop X, Y), Index --> binop (extelt X, Index), (extelt Y, Index)
We want to have this in the DAG too because as we can see in some of the test diffs (reductions),
the pattern may not be visible in IR.
Given that this is already an IR canonicalization, any backend that would prefer a vector op over
a scalar op is expected to already have the reverse transform in DAG lowering (not sure if that's
a realistic expectation though). The transform is limited with a TLI hook because there's an
existing transform in CodeGenPrepare that tries to do the opposite transform.
Differential Revision: https://reviews.llvm.org/D55722
llvm-svn: 350354
Currently we expand the two nodes separately. This gives DAG combiner an opportunity to optimize the expanded sequence taking into account only one set of users. When we expand the other node we'll create the expansion again, but might not be able to optimize it the same way. So the nodes won't CSE and we'll have two similarish sequences in the same basic block. By expanding both nodes at the same time we'll avoid prematurely optimizing the expansion until both the division and remainder have been replaced.
Improves the test case from PR38217. There may be additional opportunities after this.
Differential Revision: https://reviews.llvm.org/D56145
llvm-svn: 350239
By also promoting the input type we get a better idea for what scalar type to use. This can provide better results if the result of the extract is sign extended. What was previously happening is that the extract result would be legalized, sometime later the input of the sign extend would be legalized using the result of the extract. Then later the extract input would be legalized forcing a truncate into the input of the sign extend using a replace all uses. This requires DAG combine to combine out the sext/truncate pair. But sometimes we visited the truncate first and messed things up before the sext could be combined.
By creating the extract with the correct scalar type when we create legalize the result type, the truncate will be added right away. Then when the sign_extend input is legalized it will create an any_extend of the truncate which can be optimized by getNode to maybe remove the truncate. And then a sign_extend_inreg. Now DAG combine doesn't have to worry about getting rid of the extend.
This fixes the regression on X86 in D56156.
Differential Revision: https://reviews.llvm.org/D56176
llvm-svn: 350236
If x has multiple sign bits than it doesn't matter which one we extend from so we can sext from x's msb instead.
The X86 setcc-combine.ll changes are a little weird. It appears we ended up with a (sext_inreg (aext (trunc (extractelt)))) after type legalization. The sext_inreg+aext now gets optimized by this combine to leave (sext (trunc (extractelt))). Then we visit the trunc before we visit the sext. This ends up changing the truncate to an extractvectorelt from a bitcasted vector. I have a follow up patch to fix this.
Differential Revision: https://reviews.llvm.org/D56156
llvm-svn: 350235
default
During the lowering of a switch that would result in the generation of a jump
table, a range check is performed before indexing into the jump table, for the
switch value being outside the jump table range and a conditional branch is
inserted to jump to the default block. In case the default block is
unreachable, this conditional jump can be omitted. This patch implements
omitting this conditional branch for unreachable defaults.
Review Reference: D52002
llvm-svn: 350186
The patch adds a possibility to make library calls on NVPTX.
An important thing about library functions - they must be defined within
the current module. This basically should guarantee that we produce a
valid PTX assembly (without calls to not defined functions). The one who
wants to use the libcalls is probably will have to link against
compiler-rt or any other implementation.
Currently, it's completely impossible to make library calls because of
error LLVM ERROR: Cannot select: i32 = ExternalSymbol '...'. But we can
lower ExternalSymbol to TargetExternalSymbol and verify if the function
definition is available.
Also, there was an issue with a DAG during legalisation. When we expand
instruction into libcall, the inner call-chain isn't being "integrated"
into outer chain. Since the last "data-flow" (call retval load) node is
located in call-chain earlier than CALLSEQ_END node, the latter becomes
a leaf and therefore a dead node (and is being removed quite fast).
Proposed here solution relies on another data-flow pseudo nodes
(ProxyReg) which purpose is only to keep CALLSEQ_END at legalisation and
instruction selection phases - we remove the pseudo instructions before
register scheduling phase.
Patch by Denys Zariaiev!
Differential Revision: https://reviews.llvm.org/D34708
llvm-svn: 350069
This is an alternative to what I attempted in D56057.
GetDemandedBits is a special version of SimplifyDemandedBits that allows simplifications even when the operand has other uses. GetDemandedBits will only do simplifications that allow a node to be bypassed. It won't create new nodes or alter any of the other users.
I had to add support for bypassing SIGN_EXTEND_INREG to GetDemandedBits.
Based on a patch that Simon Pilgrim sent me in email.
Fixes PR40142.
llvm-svn: 350059
More migration so we can disable the implicit int -> LocationSize
conversion.
All of these are either scatter/gather'ed vector instructions, or direct
loads. Hence, they're all precise.
Perhaps if we see way more getTypeStoreSize calls, we can make a
getTypeStoreLocationSize (or similar) as a wrapper that applies this
::precise. Doesn't appear that it's a good idea to make getTypeStoreSize
return a LocationSize itself, however.
llvm-svn: 350042
It's dangerous to knowingly create an illegal vector type
no matter what stage of combining we're in.
This prevents the missed folding/scalarization seen in:
https://bugs.llvm.org/show_bug.cgi?id=40146
llvm-svn: 350034
trunc (add X, C ) --> add (trunc X), C'
If we're throwing away the top bits of an 'add' instruction, do it in the narrow destination type.
This makes the truncate-able opcode list identical to the sibling transform done in IR (in instcombine).
This change used to show regressions for x86, but those are gone after D55494.
This gets us closer to deleting the x86 custom function (combineTruncatedArithmetic)
that does almost the same thing.
Differential Revision: https://reviews.llvm.org/D55866
llvm-svn: 350006
This saves materializing the immediate. The additional forms are less
common (they don't usually show up for bitfield insert/extract), but
they're still relevant.
I had to add a new target hook to prevent DAGCombine from reversing the
transform. That isn't the only possible way to solve the conflict, but
it seems straightforward enough.
Differential Revision: https://reviews.llvm.org/D55630
llvm-svn: 349857
This patch enables funnel shift -> rotate building for all ROTL/ROTR custom/legal operations.
AFAICT X86 was the last target that was missing modulo support (PR38243), but I've tried to CC stakeholders for every target that has ROTL/ROTR custom handling for their final OK.
Differential Revision: https://reviews.llvm.org/D55747
llvm-svn: 349765
Now that SimplifyDemandedBits/SimplifyDemandedVectorElts is simplifying vector elements, we're seeing more constant BUILD_VECTOR containing undefs.
This patch provides opt-in support for UNDEF elements in matchBinaryPredicate, passing NULL instead of the result ConstantSDNode* argument.
I've updated the (or (and X, c1), c2) -> (and (or X, c2), c1|c2) fold to demonstrate its use, which I believe is safe for undef cases.
Differential Revision: https://reviews.llvm.org/D55822
llvm-svn: 349629
Now that SimplifyDemandedBits/SimplifyDemandedVectorElts is simplifying vector elements, we're seeing more constant BUILD_VECTOR containing undefs.
This patch provides opt-in support for UNDEF elements in matchBinaryPredicate, passing NULL instead of the result ConstantSDNode* argument.
Differential Revision: https://reviews.llvm.org/D55822
llvm-svn: 349628
As described on PR40091, we have several places where zext (and zext_vector_inreg) fold an undef input into an undef output. For zero extensions this is incorrect as the output should guarantee to least have the new upper bits set to zero.
SimplifyDemandedVectorElts is the worst offender (and its the most likely to cause new undefs to appear) but DAGCombiner's tryToFoldExtendOfConstant has a similar issue.
Thanks to @dmgreen for catching this.
Differential Revision: https://reviews.llvm.org/D55883
llvm-svn: 349625
Now that SimplifyDemandedBits/SimplifyDemandedVectorElts are simplifying vector elements, we're seeing more constant BUILD_VECTOR containing UNDEFs.
This patch provides opt-in handling of UNDEF elements in matchUnaryPredicate, passing NULL instead of the ConstantSDNode* argument.
I've updated SelectionDAG::simplifyShift to demonstrate its use.
Differential Revision: https://reviews.llvm.org/D55819
llvm-svn: 349616
SelectionDAG currently changes these intrinsics to function calls, but that won't work
for other ISel's. Also we want to eventually support nonlazybind and weak linkage coming
from the front-end which we can't do in SelectionDAG.
llvm-svn: 349552
For opcodes not covered by SimplifyDemandedVectorElts, SimplifyDemandedBits might be able to help now that it supports demanded elts as well.
llvm-svn: 349466
The assertion type is always supposed to be a scalar type. So if the result VT of the assertion is a vector, we need to get the scalar VT before we can compare them.
Similarly for the assert above it.
I don't have a test case because I don't know of any place we violate this today. A coworker found this while trying to use r347287 on the 6.0 branch without also having r336868
llvm-svn: 349390
This is an initial patch to add the necessary support for a DemandedElts argument to SimplifyDemandedBits, more closely matching computeKnownBits and to help improve vector codegen.
I've added only a small amount of the changes necessary to get at least one test to update - a lot more can be done but I'd like to add these methodically with proper test coverage, at the same time the hope is to slowly move some/all of SimplifyDemandedVectorElts into SimplifyDemandedBits as well.
Differential Revision: https://reviews.llvm.org/D55768
llvm-svn: 349374
We keep a few iterators into the basic block we're selecting while
performing FastISel. Usually this is fine, but occasionally code wants
to remove already-emitted instructions. When this happens we have to be
careful to update those iterators so they're not pointint at dangling
memory.
llvm-svn: 349365
The transform performs a bitwise logic op in a wider type followed by
truncate when both inputs are truncated from the same source type:
logic_op (truncate x), (truncate y) --> truncate (logic_op x, y)
There are a bunch of other checks that should prevent doing this when
it might be harmful.
We already do this transform for scalars in this spot. The vector
limitation was shared with a check for the case when the operands are
extended. I'm not sure if that limit is needed either, but that would
be a separate patch.
Differential Revision: https://reviews.llvm.org/D55448
llvm-svn: 349303
Also exposes an issue in DAGCombiner::visitFunnelShift where we were assuming the shift amount had the result type (after legalization it'll have the targets shift amount type).
llvm-svn: 349298
Summary:
If the setcc already has the target desired type we can reach the getSetCC/getSExtOrTrunc after the MatchingVecType check with the exact same types as the nodes we started with. This causes those causes VsetCC to be CSEd to N0 and the getSExtOrTrunc will CSE to N. When we return N, the caller will think that meant we called CombineTo and did our own worklist management. But that's not what happened. This prevents target hooks from being called for the node.
To fix this, I've now returned SDValue if the setcc is already the desired type. But to avoid some regressions in X86 I've had to disable one of the target combines that wasn't being reached before in the case of a (sext (setcc)). If we get vector widening legalization enabled that entire function will be deleted anyway so hopefully this is only for the short term.
Reviewers: RKSimon, spatel
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D55459
llvm-svn: 349137
This isn't quite NFC, but I don't know how to expose
any outward diffs from these changes. Mostly, this
was confusing because it used 'VT' to refer to the
operand type rather the usual type of the input node.
There's also a large block at the end that is dedicated
solely to matching loads, but that wasn't obvious. This
could probably be split up into separate functions to
make it easier to see.
It's still not clear to me when we make certain transforms
because the legality and constant conditions are
intertwined in a way that might be improved.
llvm-svn: 349095
This is a retry of rL349051 (reverted at rL349056). I changed the check for dead-ness from
number of uses to an opcode test for DELETED_NODE based on existing similar code.
Differential Revision: https://reviews.llvm.org/D55655
llvm-svn: 349058
Move existing rotation expansion code into TargetLowering and set it up for vectors as well.
Ideally this would share more of the funnel shift expansion, but we handle the shift amount modulo quite differently at the moment.
Begun removing x86 vector rotate custom lowering to use the expansion.
llvm-svn: 349025
Summary:
All targets either just return false here or properly model `Fast`, so I
don't think there is any reason to prevent CodeGen from doing the right
thing here.
Subscribers: nemanjai, javed.absar, eraman, jsji, llvm-commits
Differential Revision: https://reviews.llvm.org/D55365
llvm-svn: 349016
This patch introduces a generic function to determine whether a given vector type is known to be a splat value for the specified demanded elements, recursing up the DAG looking for BUILD_VECTOR or VECTOR_SHUFFLE splat patterns.
It also keeps track of the elements that are known to be UNDEF - it returns true if all the demanded elements are UNDEF (as this may be useful under some circumstances), so this needs to be handled by the caller.
A wrapper variant is also provided that doesn't take the DemandedElts or UndefElts arguments for cases where we just want to know if the SDValue is a splat or not (with/without UNDEFS).
I had hoped to completely remove the X86 local version of this function, but I'm seeing some regressions in shift/rotate codegen that will take a little longer to fix and I hope to get this in sooner so I can continue work on PR38243 which needs more capable splat detection.
Differential Revision: https://reviews.llvm.org/D55426
llvm-svn: 348953
If either of the operand elements are zero then we know the result element is going to be zero (even if the other element is undef).
Differential Revision: https://reviews.llvm.org/D55558
llvm-svn: 348926
Add an intrinsic that takes 2 signed integers with the scale of them provided
as the third argument and performs fixed point multiplication on them.
This is a part of implementing fixed point arithmetic in clang where some of
the more complex operations will be implemented as intrinsics.
Differential Revision: https://reviews.llvm.org/D54719
llvm-svn: 348912
Summary:
All targets either just return false here or properly model `Fast`, so I
don't think there is any reason to prevent CodeGen from doing the right
thing here.
Subscribers: nemanjai, javed.absar, eraman, jsji, llvm-commits
Differential Revision: https://reviews.llvm.org/D55365
llvm-svn: 348843
If all the demanded elements of the SimplifyDemandedVectorElts are known to be UNDEF, we can simplify to an ISD::UNDEF node.
Zero constant folding will be handled in a future patch - its a little trickier as we often have bitcasted zero values.
Differential Revision: https://reviews.llvm.org/D55511
llvm-svn: 348784
Evandro Menezes