https://reviews.llvm.org/D57608
It's a common pattern in GISel to have a MachineInstrBuilder from which we get various regs
(commonly MIB->getOperand(0).getReg()). This adds a helper method and the above can be
replaced with MIB.getReg(0).
llvm-svn: 353223
This patch adds support for vector @llvm.ceil intrinsics when full 16 bit
floating point support isn't available.
To do this, this patch...
- Implements basic isel for G_UNMERGE_VALUES
- Teaches the legalizer about 16 bit floats
- Teaches AArch64RegisterBankInfo to respect floating point registers on
G_BUILD_VECTOR and G_UNMERGE_VALUES
- Teaches selectCopy about 16-bit floating point vectors
It also adds
- A legalizer test for the 16-bit vector ceil which verifies that we create a
G_UNMERGE_VALUES and G_BUILD_VECTOR when full fp16 isn't supported
- An instruction selection test which makes sure we lower to G_FCEIL when
full fp16 is supported
- A test for selecting G_UNMERGE_VALUES
And also updates arm64-vfloatintrinsics.ll to show that the new ceiling types
work as expected.
https://reviews.llvm.org/D56682
llvm-svn: 352113
to reflect the new license.
We understand that people may be surprised that we're moving the header
entirely to discuss the new license. We checked this carefully with the
Foundation's lawyer and we believe this is the correct approach.
Essentially, all code in the project is now made available by the LLVM
project under our new license, so you will see that the license headers
include that license only. Some of our contributors have contributed
code under our old license, and accordingly, we have retained a copy of
our old license notice in the top-level files in each project and
repository.
llvm-svn: 351636
This code pattern is an unfortunate side effect of the way some types get split
at call lowering. Ideally we'd either not generate it at all or combine it away
in the legalizer artifact combiner.
Until then, add selection support anyway which is a significant proportion of
our current fallbacks on CTMark.
rdar://46491420
llvm-svn: 349712
The pass implements tracking of control flow miss-speculation into a "taint"
register. That taint register can then be used to mask off registers with
sensitive data when executing under miss-speculation, a.k.a. "transient
execution".
This pass is aimed at mitigating against SpectreV1-style vulnarabilities.
At the moment, it implements the tracking of miss-speculation of control
flow into a taint register, but doesn't implement a mechanism yet to then
use that taint register to mask off vulnerable data in registers (something
for a follow-on improvement). Possible strategies to mask out vulnerable
data that can be implemented on top of this are:
- speculative load hardening to automatically mask of data loaded
in registers.
- using intrinsics to mask of data in registers as indicated by the
programmer (see https://lwn.net/Articles/759423/).
For AArch64, the following implementation choices are made.
Some of these are different than the implementation choices made in
the similar pass implemented in X86SpeculativeLoadHardening.cpp, as
the instruction set characteristics result in different trade-offs.
- The speculation hardening is done after register allocation. With a
relative abundance of registers, one register is reserved (X16) to be
the taint register. X16 is expected to not clash with other register
reservation mechanisms with very high probability because:
. The AArch64 ABI doesn't guarantee X16 to be retained across any call.
. The only way to request X16 to be used as a programmer is through
inline assembly. In the rare case a function explicitly demands to
use X16/W16, this pass falls back to hardening against speculation
by inserting a DSB SYS/ISB barrier pair which will prevent control
flow speculation.
- It is easy to insert mask operations at this late stage as we have
mask operations available that don't set flags.
- The taint variable contains all-ones when no miss-speculation is detected,
and contains all-zeros when miss-speculation is detected. Therefore, when
masking, an AND instruction (which only changes the register to be masked,
no other side effects) can easily be inserted anywhere that's needed.
- The tracking of miss-speculation is done by using a data-flow conditional
select instruction (CSEL) to evaluate the flags that were also used to
make conditional branch direction decisions. Speculation of the CSEL
instruction can be limited with a CSDB instruction - so the combination of
CSEL + a later CSDB gives the guarantee that the flags as used in the CSEL
aren't speculated. When conditional branch direction gets miss-speculated,
the semantics of the inserted CSEL instruction is such that the taint
register will contain all zero bits.
One key requirement for this to work is that the conditional branch is
followed by an execution of the CSEL instruction, where the CSEL
instruction needs to use the same flags status as the conditional branch.
This means that the conditional branches must not be implemented as one
of the AArch64 conditional branches that do not use the flags as input
(CB(N)Z and TB(N)Z). This is implemented by ensuring in the instruction
selectors to not produce these instructions when speculation hardening
is enabled. This pass will assert if it does encounter such an instruction.
- On function call boundaries, the miss-speculation state is transferred from
the taint register X16 to be encoded in the SP register as value 0.
Future extensions/improvements could be:
- Implement this functionality using full speculation barriers, akin to the
x86-slh-lfence option. This may be more useful for the intrinsics-based
approach than for the SLH approach to masking.
Note that this pass already inserts the full speculation barriers if the
function for some niche reason makes use of X16/W16.
- no indirect branch misprediction gets protected/instrumented; but this
could be done for some indirect branches, such as switch jump tables.
Differential Revision: https://reviews.llvm.org/D54896
llvm-svn: 349456
https://reviews.llvm.org/D55294
Previously MachineIRBuilder::buildInstr used to accept variadic
arguments for sources (which were either unsigned or
MachineInstrBuilder). While this worked well in common cases, it doesn't
allow us to build instructions that have multiple destinations.
Additionally passing in other optional parameters in the end (such as
flags) is not possible trivially. Also a trivial call such as
B.buildInstr(Opc, Reg1, Reg2, Reg3)
can be interpreted differently based on the opcode (2defs + 1 src for
unmerge vs 1 def + 2srcs).
This patch refactors the buildInstr to
buildInstr(Opc, ArrayRef<DstOps>, ArrayRef<SrcOps>)
where DstOps and SrcOps are typed unions that know how to add itself to
MachineInstrBuilder.
After this patch, most invocations would look like
B.buildInstr(Opc, {s32, DstReg}, {SrcRegs..., SrcMIBs..});
Now all the other calls (such as buildAdd, buildSub etc) forward to
buildInstr. It also makes it possible to build instructions with
multiple defs.
Additionally in a subsequent patch, we should make it possible to add
flags directly while building instructions.
Additionally, the main buildInstr method is now virtual and other
builders now only have to override buildInstr (for say constant
folding/cseing) is straightforward.
Also attached here (https://reviews.llvm.org/F7675680) is a clang-tidy
patch that should upgrade the API calls if necessary.
llvm-svn: 348815
This patch restricts the capability of G_MERGE_VALUES, and uses the new
G_BUILD_VECTOR and G_CONCAT_VECTORS opcodes instead in the appropriate places.
This patch also includes AArch64 support for selecting G_BUILD_VECTOR of <4 x s32>
and <2 x s64> vectors.
Differential Revisions: https://reviews.llvm.org/D53629
llvm-svn: 348788
We previously disabled this in r323371 because of a bug where we selected an
extending load, but didn't delete the old G_LOAD, resulting in two loads being
generated for volatile loads.
Since we now have dedicated G_SEXTLOAD/G_ZEXTLOAD operations, and that the
tablegen patterns should no longer be able to select (ext(load x)) patterns, it
should be safe to re-enable it.
The old test case should still work as expected.
llvm-svn: 348320
This adds the plumbing for the Tiny code model for the AArch64 backend. This,
instead of loading addresses through the normal ADRP;ADD pair used in the Small
model, uses a single ADR. The 21 bit range of an ADR means that the code and
its statically defined symbols need to be within 1MB of each other.
This makes it mostly interesting for embedded applications where we want to fit
as much as we can in as small a space as possible.
Differential Revision: https://reviews.llvm.org/D49673
llvm-svn: 340397
Also refactors some existing code to materialize addresses for the large code
model so it can be shared between G_GLOBAL_VALUE and G_BLOCK_ADDR.
This implements PR36390.
Differential Revision: https://reviews.llvm.org/D49903
llvm-svn: 338337
The DEBUG() macro is very generic so it might clash with other projects.
The renaming was done as follows:
- git grep -l 'DEBUG' | xargs sed -i 's/\bDEBUG\s\?(/LLVM_DEBUG(/g'
- git diff -U0 master | ../clang/tools/clang-format/clang-format-diff.py -i -p1 -style LLVM
- Manual change to APInt
- Manually chage DOCS as regex doesn't match it.
In the transition period the DEBUG() macro is still present and aliased
to the LLVM_DEBUG() one.
Differential Revision: https://reviews.llvm.org/D43624
llvm-svn: 332240
Summary:
Previously, a extending load was represented at (G_*EXT (G_LOAD x)).
This had a few drawbacks:
* G_LOAD had to be legal for all sizes you could extend from, even if
registers didn't naturally hold those sizes.
* All sizes you could extend from had to be allocatable just in case the
extend went missing (e.g. by optimization).
* At minimum, G_*EXT and G_TRUNC had to be legal for these sizes. As we
improve optimization of extends and truncates, this legality requirement
would spread without considerable care w.r.t when certain combines were
permitted.
* The SelectionDAG importer required some ugly and fragile pattern
rewriting to translate patterns into this style.
This patch changes the representation to:
* (G_[SZ]EXTLOAD x)
* (G_LOAD x) any-extends when MMO.getSize() * 8 < ResultTy.getSizeInBits()
which resolves these issues by allowing targets to work entirely in their
native register sizes, and by having a more direct translation from
SelectionDAG patterns.
Each extending load can be lowered by the legalizer into separate extends
and loads, however a target that supports s1 will need the any-extending
load to extend to at least s8 since LLVM does not represent memory accesses
smaller than 8 bit. The legalizer can widenScalar G_LOAD into an
any-extending load but sign/zero-extending loads need help from something
else like a combiner pass. A follow-up patch that adds combiner helpers for
for this will follow.
The new representation requires that the MMO correctly reflect the memory
access so this has been corrected in a couple tests. I've also moved the
extending loads to their own tests since they are (mostly) separate opcodes
now. Additionally, the re-write appears to have invalidated two tests from
select-with-no-legality-check.mir since the matcher table no longer contains
loads that result in s1's and they aren't legal in AArch64 anymore.
Depends on D45540
Reviewers: ab, aditya_nandakumar, bogner, rtereshin, volkan, rovka, javed.absar
Reviewed By: rtereshin
Subscribers: javed.absar, llvm-commits, kristof.beyls
Differential Revision: https://reviews.llvm.org/D45541
llvm-svn: 331601
This is a follow on commit to r[x] where we fix the other direction of copy.
For this case, after converting the source from gpr32 -> fpr32, we use a
subregister copy, which is essentially what EXTRACT_SUBREG does in SDAG land.
https://reviews.llvm.org/D43444
llvm-svn: 325550
This fixes a crash where the user is a COPY, which deliberately does not
constrain its source operands, resulting in a vreg without a reg class escaping
selection.
Differential Revision: https://reviews.llvm.org/D42697
llvm-svn: 324047
The tablegen imported patterns for sext(load(a)) don't check for single uses
of the load or delete the original after matching. As a result two loads are
left in the generated code. This particular issue will be fixed by adding
support for a G_SEXTLOAD opcode in future.
There are however other potential issues around this that wouldn't be fixed by
a G_SEXTLOAD, so until we have a proper solution we don't try to handle volatile
loads at all in the AArch64 selector.
Fixes/works around PR36018.
llvm-svn: 323371
Summary:
This patch adds CustomRenderer which renders the matched
operands to the specified instruction.
Targets can enable the matching of SDNodeXForm by adding
a definition that inherits from GICustomOperandRenderer and
GISDNodeXFormEquiv as follows.
def gi_imm8 : GICustomOperandRenderer<"renderImm8”>,
GISDNodeXFormEquiv<imm8_xform>;
Custom renderer functions should be of the form:
void render(MachineInstrBuilder &MIB, const MachineInstr &I);
Reviewers: dsanders, ab, rovka
Reviewed By: dsanders
Subscribers: kristof.beyls, javed.absar, llvm-commits, mgrang, qcolombet
Differential Revision: https://reviews.llvm.org/D42012
llvm-svn: 322582
This patch splits atomics out of the generic G_LOAD/G_STORE and into their own
G_ATOMIC_LOAD/G_ATOMIC_STORE. This is a pragmatic decision rather than a
necessary one. Atomic load/store has little in implementation in common with
non-atomic load/store. They tend to be handled very differently throughout the
backend. It also has the nice side-effect of slightly improving the common-case
performance at ISel since there's no longer a need for an atomicity check in the
matcher table.
All targets have been updated to remove the atomic load/store check from the
G_LOAD/G_STORE path. AArch64 has also been updated to mark
G_ATOMIC_LOAD/G_ATOMIC_STORE legal.
There is one issue with this patch though which also affects the extending loads
and truncating stores. The rules only match when an appropriate G_ANYEXT is
present in the MIR. For example,
(G_ATOMIC_STORE (G_TRUNC:s16 (G_ANYEXT:s32 (G_ATOMIC_LOAD:s16 X))))
will match but:
(G_ATOMIC_STORE (G_ATOMIC_LOAD:s16 X))
will not. This shouldn't be a problem at the moment, but as we get better at
eliminating extends/truncates we'll likely start failing to match in some
cases. The current plan is to fix this in a patch that changes the
representation of extending-load/truncating-store to allow the MMO to describe
a different type to the operation.
llvm-svn: 319691
Summary:
This patch adds a LLVM_ENABLE_GISEL_COV which, like LLVM_ENABLE_DAGISEL_COV,
causes TableGen to instrument the generated table to collect rule coverage
information. However, LLVM_ENABLE_GISEL_COV goes a bit further than
LLVM_ENABLE_DAGISEL_COV. The information is written to files
(${CMAKE_BINARY_DIR}/gisel-coverage-* by default). These files can then be
concatenated into ${LLVM_GISEL_COV_PREFIX}-all after which TableGen will
read this information and use it to emit warnings about untested rules.
This technique could also be used by SelectionDAG and can be further
extended to detect hot rules and give them priority over colder rules.
Usage:
* Enable LLVM_ENABLE_GISEL_COV in CMake
* Build the compiler and run some tests
* cat gisel-coverage-[0-9]* > gisel-coverage-all
* Delete lib/Target/*/*GenGlobalISel.inc*
* Build the compiler
Known issues:
* ${LLVM_GISEL_COV_PREFIX}-all must be generated as a manual
step due to a lack of a portable 'cat' command. It should be the
concatenation of all ${LLVM_GISEL_COV_PREFIX}-[0-9]* files.
* There's no mechanism to discard coverage information when the ruleset
changes
Depends on D39742
Reviewers: ab, qcolombet, t.p.northover, aditya_nandakumar, rovka
Reviewed By: rovka
Subscribers: vsk, arsenm, nhaehnle, mgorny, kristof.beyls, javed.absar, igorb, llvm-commits
Differential Revision: https://reviews.llvm.org/D39747
llvm-svn: 318356
Summary:
iPTR is a pointer of subtarget-specific size to any address space. Therefore
type checks on this size derive the SizeInBits from a subtarget hook.
At this point, we can import the simplests G_LOAD rules and select load
instructions using them. Further patches will support for the predicates to
enable additional loads as well as the stores.
The previous commit failed on MSVC due to a failure to convert an
initializer_list to a std::vector. Hopefully, MSVC will accept this version.
Depends on D37457
Reviewers: ab, qcolombet, t.p.northover, rovka, aditya_nandakumar
Reviewed By: qcolombet
Subscribers: kristof.beyls, javed.absar, llvm-commits, igorb
Differential Revision: https://reviews.llvm.org/D37458
llvm-svn: 315887
Summary:
iPTR is a pointer of subtarget-specific size to any address space. Therefore
type checks on this size derive the SizeInBits from a subtarget hook.
At this point, we can import the simplests G_LOAD rules and select load
instructions using them. Further patches will support for the predicates to
enable additional loads as well as the stores.
Depends on D37457
Reviewers: ab, qcolombet, t.p.northover, rovka, aditya_nandakumar
Reviewed By: qcolombet
Subscribers: kristof.beyls, javed.absar, llvm-commits, igorb
Differential Revision: https://reviews.llvm.org/D37458
llvm-svn: 315885
Summary:
It's possible for a ComplexPattern to be used as an operator in a match
pattern. This is used by the load/store patterns in AArch64 to name the
suboperands returned by ComplexPattern predicate so that they can be broken
apart and referenced independently in the result pattern.
This patch adds support for this in order to enable the import of load/store
patterns.
Depends on D37445
Hopefully fixed the ambiguous constructor that a large number of bots reported.
Reviewers: ab, qcolombet, t.p.northover, rovka, aditya_nandakumar
Reviewed By: qcolombet
Subscribers: aemerson, javed.absar, igorb, llvm-commits, kristof.beyls
Differential Revision: https://reviews.llvm.org/D37456
llvm-svn: 315869
Summary:
It's possible for a ComplexPattern to be used as an operator in a match
pattern. This is used by the load/store patterns in AArch64 to name the
suboperands returned by ComplexPattern predicate so that they can be broken
apart and referenced independently in the result pattern.
This patch adds support for this in order to enable the import of load/store
patterns.
Depends on D37445
Reviewers: ab, qcolombet, t.p.northover, rovka, aditya_nandakumar
Reviewed By: qcolombet
Subscribers: aemerson, javed.absar, igorb, llvm-commits, kristof.beyls
Differential Revision: https://reviews.llvm.org/D37456
llvm-svn: 315863
Summary:
There's only a tablegen testcase for IntImmLeaf and not a CodeGen one
because the relevant rules are rejected for other reasons at the moment.
On AArch64, it's because there's an SDNodeXForm attached to the operand.
On X86, it's because the rule either emits multiple instructions or has
another predicate using PatFrag which cannot easily be supported at the
same time.
Reviewers: ab, t.p.northover, qcolombet, rovka, aditya_nandakumar
Reviewed By: qcolombet
Subscribers: aemerson, javed.absar, igorb, llvm-commits, kristof.beyls
Differential Revision: https://reviews.llvm.org/D36569
llvm-svn: 315761
We already support these in tablegen, but we're matching the wrong
operator (libm ftrunc). Fix that.
While there, drop the c++ code, support COPYs of FPR16, and add tests
for the other types.
llvm-svn: 313073
G_PHI has the same semantics as PHI but also has types.
This lets us verify that the types in the G_PHI are consistent.
This also allows specifying legalization actions for G_PHIs.
https://reviews.llvm.org/D36990
llvm-svn: 311596
Summary:
Support the case where an operand of a pattern is also the whole of the
result pattern. In this case the original result and all its uses must be
replaced by the operand. However, register class restrictions can require
a COPY. This patch handles both cases by always emitting the copy and
leaving it for the register allocator to optimize.
The previous commit failed on Windows machines due to a flaw in the sort
predicate which allowed both A < B < C and B == C to be satisfied
simultaneously. The cause of this was some sloppiness in the priority order of
G_CONSTANT instructions compared to other instructions. These had equal priority
because it makes no difference, however there were operands had higher priority
than G_CONSTANT but lower priority than any other instruction. As a result, a
priority order between G_CONSTANT and other instructions must be enforced to
ensure the predicate defines a strict weak order.
Reviewers: ab, t.p.northover, qcolombet, rovka, aditya_nandakumar
Subscribers: javed.absar, kristof.beyls, igorb, llvm-commits
Differential Revision: https://reviews.llvm.org/D36084
llvm-svn: 311076
As expected, this failed on the windows bots but the instrumentation showed
something interesting. The ADD8ri and INC8r rules are never directly compared
on the windows machines. That implies that the issue lies in transitivity of
the Compare predicate. I believe I've already verified that but maybe I missed
something.
llvm-svn: 310922
Summary:
Support the case where an operand of a pattern is also the whole of the
result pattern. In this case the original result and all its uses must be
replaced by the operand. However, register class restrictions can require
a COPY. This patch handles both cases by always emitting the copy and
leaving it for the register allocator to optimize.
The previous commit failed on the windows bots and this one is likely to fail
on those same bots. However, the added instrumentation should reveal a particular
isHigherPriorityThan() evaluation which I'm expecting to expose that
these machines are weighing priority of two rules differently from the
non-windows machines.
Reviewers: ab, t.p.northover, qcolombet, rovka, aditya_nandakumar
Subscribers: javed.absar, kristof.beyls, igorb, llvm-commits
Differential Revision: https://reviews.llvm.org/D36084
llvm-svn: 310919
Two of the Windows bots are failing test\CodeGen\X86\GlobalISel\select-inc.mir
which should not have been affected by the change. Reverting while I investigate.
Also reverted r310735 because it builds on r310716.
llvm-svn: 310745
Summary:
Support the case where an operand of a pattern is also the whole of the
result pattern. In this case the original result and all its uses must be
replaced by the operand. However, register class restrictions can require
a COPY. This patch handles both cases by always emitting the copy and
leaving it for the register allocator to optimize.
Depends on D35833
Reviewers: ab, t.p.northover, qcolombet, rovka, aditya_nandakumar
Subscribers: javed.absar, kristof.beyls, igorb, llvm-commits
Differential Revision: https://reviews.llvm.org/D36084
llvm-svn: 310716
Summary:
This patch enables the import of rules containing 'imm' operands that do not
constrain the acceptable values using predicates. Support for ImmLeaf will
arrive in a later patch.
Depends on D35681
Reviewers: ab, t.p.northover, qcolombet, rovka, aditya_nandakumar
Reviewed By: rovka
Subscribers: kristof.beyls, javed.absar, igorb, llvm-commits
Differential Revision: https://reviews.llvm.org/D35833
llvm-svn: 310343
With this change, the GlobalISel library gets always built. In
particular, this is not possible to opt GlobalISel out of the build
using the LLVM_BUILD_GLOBAL_ISEL variable any more.
llvm-svn: 309990
It revealed a bug in the Localizer pass which has now been fixed.
This includes the fix for SUBREG_TO_REG committed separately last time.
llvm-svn: 308688
A generic variant of IMPLICIT_DEF was added in r306875, but this
survives to selection and hits a `Cannot Select`. Add handling that
converts the note to a regular IMPLICIT_DEF.
llvm-svn: 307817
Add breaks - doesn't affect results as both GPR/FPU both check for 32/64 bit sizes. So will still default to GenericOps in the same way.
llvm-svn: 307484
Summary:
Replace the matcher if-statements for each rule with a state-machine. This
significantly reduces compile time, memory allocations, and cumulative memory
allocation when compiling AArch64InstructionSelector.cpp.o after r303259 is
recommitted.
The following patches will expand on this further to fully fix the regressions.
Reviewers: rovka, ab, t.p.northover, qcolombet, aditya_nandakumar
Reviewed By: ab
Subscribers: vitalybuka, aemerson, javed.absar, igorb, llvm-commits, kristof.beyls
Differential Revision: https://reviews.llvm.org/D33758
llvm-svn: 307079
Summary:
After this patch, we finally have test cases that require multiple
instruction emission.
Depends on D33590
Reviewers: ab, qcolombet, t.p.northover, rovka, kristof.beyls
Subscribers: javed.absar, llvm-commits, igorb
Differential Revision: https://reviews.llvm.org/D33596
llvm-svn: 306388
Summary:
Predicate<> now has a field to indicate how often it must be recomputed.
Currently, there are two frequencies, per-module (RecomputePerFunction==0)
and per-function (RecomputePerFunction==1). Per-function predicates are
currently recomputed more frequently than necessary since the only predicate
in this category is cheap to test. Per-module predicates are now computed in
getSubtargetImpl() while per-function predicates are computed in selectImpl().
Tablegen now manages the PredicateBitset internally. It should only be
necessary to add the required includes.
Also fixed a problem revealed by the test case where
constrainSelectedInstRegOperands() would attempt to tie operands that
BuildMI had already tied.
Reviewers: ab, qcolombet, t.p.northover, rovka, aditya_nandakumar
Reviewed By: rovka
Subscribers: kristof.beyls, igorb, llvm-commits
Differential Revision: https://reviews.llvm.org/D32491
llvm-svn: 301750
Summary:
Some targets need to be able to do more complex rendering than just adding an
operand or two to an instruction. For example, it may need to insert an
instruction to extract a subreg first, or it may need to perform an operation
on the operand.
In SelectionDAG, targets would create SDNode's to achieve the desired effect
during the complex pattern predicate. This worked because SelectionDAG had a
form of garbage collection that would take care of SDNode's that were created
but not used due to a later predicate rejecting a match. This doesn't translate
well to GlobalISel and the churn was wasteful.
The API changes in this patch enable GlobalISel to accomplish the same thing
without the waste. The API is now:
InstructionSelector::OptionalComplexRendererFn selectArithImmed(MachineOperand &Root) const;
where Root is the root of the match. The return value can be omitted to
indicate that the predicate failed to match, or a function with the signature
ComplexRendererFn can be returned. For example:
return OptionalComplexRendererFn(
[=](MachineInstrBuilder &MIB) { MIB.addImm(Immed).addImm(ShVal); });
adds two immediate operands to the rendered instruction. Immed and ShVal are
captured from the predicate function.
As an added bonus, this also reduces the amount of information we need to
provide to GIComplexOperandMatcher.
Depends on D31418
Reviewers: aditya_nandakumar, t.p.northover, qcolombet, rovka, ab, javed.absar
Reviewed By: ab
Subscribers: dberris, kristof.beyls, igorb, llvm-commits
Differential Revision: https://reviews.llvm.org/D31761
llvm-svn: 301079
Summary:
The SelectionDAG importer now imports rules with Predicate's attached via
Requires, PredicateControl, etc. These predicates are implemented as
bitset's to allow multiple predicates to be tested together. However,
unlike the MC layer subtarget features, each target only pays for it's own
predicates (e.g. AArch64 doesn't have 192 feature bits just because X86
needs a lot).
Both AArch64 and X86 derive at least one predicate from the MachineFunction
or Function so they must re-initialize AvailableFeatures before each
function. They also declare locals in <Target>InstructionSelector so that
computeAvailableFeatures() can use the code from SelectionDAG without
modification.
Reviewers: rovka, qcolombet, aditya_nandakumar, t.p.northover, ab
Reviewed By: rovka
Subscribers: aemerson, rengolin, dberris, kristof.beyls, llvm-commits, igorb
Differential Revision: https://reviews.llvm.org/D31418
llvm-svn: 300993
It's causing llvm-clang-x86_64-expensive-checks-win to fail to compile and I
haven't worked out why. Reverting to make it green while I figure it out.
llvm-svn: 300978
Summary:
The SelectionDAG importer now imports rules with Predicate's attached via
Requires, PredicateControl, etc. These predicates are implemented as
bitset's to allow multiple predicates to be tested together. However,
unlike the MC layer subtarget features, each target only pays for it's own
predicates (e.g. AArch64 doesn't have 192 feature bits just because X86
needs a lot).
Both AArch64 and X86 derive at least one predicate from the MachineFunction
or Function so they must re-initialize AvailableFeatures before each
function. They also declare locals in <Target>InstructionSelector so that
computeAvailableFeatures() can use the code from SelectionDAG without
modification.
Reviewers: rovka, qcolombet, aditya_nandakumar, t.p.northover, ab
Reviewed By: rovka
Subscribers: aemerson, rengolin, dberris, kristof.beyls, llvm-commits, igorb
Differential Revision: https://reviews.llvm.org/D31418
llvm-svn: 300964
Summary: This resolves the issue of tablegen-erated includes in the headers for non-GlobalISel builds in a simpler way than before.
Reviewers: qcolombet, ab
Reviewed By: ab
Subscribers: igorb, ab, mgorny, dberris, rovka, llvm-commits, kristof.beyls
Differential Revision: https://reviews.llvm.org/D30998
llvm-svn: 299637
Summary:
Lift the restrictions that prevented the tree walking introduced in the
previous change and add support for patterns like:
(G_ADD (G_MUL (G_SEXT $src1), (G_SEXT $src2)), $src3) -> SMADDWrrr $dst, $src1, $src2, $src3
Also adds support for G_SEXT and G_ZEXT to support these cases.
One particular aspect of this that I should draw attention to is that I've
tried to be overly conservative in determining the safety of matches that
involve non-adjacent instructions and multiple basic blocks. This is intended
to be used as a cheap initial check and we may add a more expensive check in
the future. The current rules are:
* Reject if any instruction may load/store (we'd need to check for intervening
memory operations.
* Reject if any instruction has implicit operands.
* Reject if any instruction has unmodelled side-effects.
See isObviouslySafeToFold().
Reviewers: t.p.northover, javed.absar, qcolombet, aditya_nandakumar, ab, rovka
Reviewed By: ab
Subscribers: igorb, dberris, llvm-commits, kristof.beyls
Differential Revision: https://reviews.llvm.org/D30539
llvm-svn: 299430
We're not to the point of supporting the load/store patterns yet
(because they extensively use PatFrags).
But in the meantime, we can implement some of the simplest addressing
modes.
llvm-svn: 298863
CBZ/CBNZ represent a substantial portion of all conditional branches.
Look through G_ICMP to select them.
We can't use tablegen yet because the existing patterns match an
AArch64ISD node.
llvm-svn: 298856
Earlier stages of GlobalISel always use ConstantInt in G_CONSTANT so that's
what we should check for.
This fixes a crash introduced in r297782.
llvm-svn: 297968
Summary:
Adds a new kind of MachineOperand: MO_Placeholder.
This operand must not appear in the MIR and only exists as a way of
creating an 'uninitialized' operand until a matcher function overwrites it.
Depends on D30046, D29712
Reviewers: t.p.northover, ab, rovka, aditya_nandakumar, javed.absar, qcolombet
Reviewed By: qcolombet
Subscribers: dberris, kristof.beyls, llvm-commits
Differential Revision: https://reviews.llvm.org/D30089
llvm-svn: 297782
Summary:
This isn't testable for AArch64 by itself so this patch also adds
support for constant immediates in the pattern and physical
register uses in the result.
The new IntOperandMatcher matches the constant in patterns such as
'(set $rd:GPR32, (G_XOR $rs:GPR32, -1))'. It's always safe to fold
immediates into an instruction so this is the first rule that will match
across multiple BB's.
The Renderer hierarchy is responsible for adding operands to the result
instruction. Renderers can copy operands (CopyRenderer) or add physical
registers (in particular %wzr and %xzr) to the result instruction
in any order (OperandMatchers now import the operand names from
SelectionDAG to allow renderers to access any operand). This allows us to
emit the result instruction for:
%1 = G_XOR %0, -1 --> %1 = ORNWrr %wzr, %0
%1 = G_XOR -1, %0 --> %1 = ORNWrr %wzr, %0
although the latter is untested since the matcher/importer has not been
taught about commutativity yet.
Added BuildMIAction which can build new instructions and mutate them where
possible. W.r.t the mutation aspect, MatchActions are now told the name of
an instruction they can recycle and BuildMIAction will emit mutation code
when the renderers are appropriate. They are appropriate when all operands
are rendered using CopyRenderer and the indices are the same as the matcher.
This currently assumes that all operands have at least one matcher.
Finally, this change also fixes a crash in
AArch64InstructionSelector::select() caused by an immediate operand
passing isImm() rather than isCImm(). This was uncovered by the other
changes and was detected by existing tests.
Depends on D29711
Reviewers: t.p.northover, ab, qcolombet, rovka, aditya_nandakumar, javed.absar
Reviewed By: rovka
Subscribers: aemerson, dberris, kristof.beyls, llvm-commits
Differential Revision: https://reviews.llvm.org/D29712
llvm-svn: 296131
The AAPCS ABI is substantially more complicated so that's coming in a separate
patch. For now we can generate correct code for iOS though.
llvm-svn: 294493
This surprisingly isn't NFC because there are patterns to select GPR
sub to SUBSWrr (rather than SUBWrr/rs); SUBS is later optimized to
SUB if NZCV is dead. From ISel's perspective, both are fine.
llvm-svn: 293010
Since r279760, we've been marking as legal operations on narrow integer
types that have wider legal equivalents (for instance, G_ADD s8).
Compared to legalizing these operations, this reduced the amount of
extends/truncates required, but was always a weird legalization decision
made at selection time.
So far, we haven't been able to formalize it in a way that permits the
selector generated from SelectionDAG patterns to be sufficient.
Using a wide instruction (say, s64), when a narrower instruction exists
(s32) would introduce register class incompatibilities (when one narrow
generic instruction is selected to the wider variant, but another is
selected to the narrower variant).
It's also impractical to limit which narrow operations are matched for
which instruction, as restricting "narrow selection" to ranges of types
clashes with potentially incompatible instruction predicates.
Concerns were also raised regarding MIPS64's sign-extended register
assumptions, as well as wrapping behavior.
See discussions in https://reviews.llvm.org/D26878.
Instead, legalize the operations.
Should we ever revert to selecting these narrow operations, we should
try to represent this more accurately: for instance, by separating
a "concrete" type on operations, and an "underlying" type on vregs, we
could move the "this narrow-looking op is really legal" decision to the
legalizer, and let the selector use the "underlying" vreg type only,
which would be guaranteed to map to a register class.
In any case, we eventually should mitigate:
- the performance impact by selecting no-op extract/truncates to COPYs
(which we currently do), and the COPYs to register reuses (which we
don't do yet).
- the compile-time impact by optimizing away extract/truncate sequences
in the legalizer.
llvm-svn: 292827
This adds a basic tablegen backend that analyzes the SelectionDAG
patterns to find simple ones that are eligible for GlobalISel-emission.
That's similar to FastISel, with one notable difference: we're not fed
ISD opcodes, so we need to map the SDNode operators to generic opcodes.
That's done using GINodeEquiv in TargetGlobalISel.td.
Otherwise, this is mostly boilerplate, and lots of filtering of any kind
of "complicated" pattern. On AArch64, this is sufficient to match G_ADD
up to s64 (to ADDWrr/ADDXrr) and G_BR (to B).
Differential Revision: https://reviews.llvm.org/D26878
llvm-svn: 290284
We were using the correct pseudo-instruction, but because the operand's flags
weren't set correctly we still ended up emitting incorrect relocations during
MC lowering.
llvm-svn: 289566
This makes it more similar to the floating-point constant, and also allows for
larger constants to be translated later. There's no real functional change in
this patch though, just syntax updates.
llvm-svn: 288712
Self-referencing PHI nodes need their destination operands to be constrained
because nothing else is likely to do so. For now we just pick a register class
naively.
Patch mostly by Ahmed again.
llvm-svn: 286183
AArch64 actually supports many 8-bit operations under the definition used by
GlobalISel: the designated information-carrying bits of a GPR32 get the right
value if you just use the normal 32-bit instruction.
llvm-svn: 284526
Aditya Nandakumar